summaryrefslogtreecommitdiffstats
path: root/arch/openrisc
diff options
context:
space:
mode:
Diffstat (limited to 'arch/openrisc')
-rw-r--r--arch/openrisc/Kbuild6
-rw-r--r--arch/openrisc/Kconfig247
-rw-r--r--arch/openrisc/Kconfig.debug2
-rw-r--r--arch/openrisc/Makefile63
-rw-r--r--arch/openrisc/boot/.gitignore2
-rw-r--r--arch/openrisc/boot/Makefile10
-rw-r--r--arch/openrisc/boot/dts/Makefile4
-rw-r--r--arch/openrisc/boot/dts/or1klitex.dts64
-rw-r--r--arch/openrisc/boot/dts/or1ksim.dts57
-rw-r--r--arch/openrisc/boot/dts/simple_smp.dts69
-rw-r--r--arch/openrisc/configs/or1klitex_defconfig56
-rw-r--r--arch/openrisc/configs/or1ksim_defconfig56
-rw-r--r--arch/openrisc/configs/simple_smp_defconfig65
-rw-r--r--arch/openrisc/configs/virt_defconfig108
-rw-r--r--arch/openrisc/include/asm/Kbuild9
-rw-r--r--arch/openrisc/include/asm/asm-offsets.h1
-rw-r--r--arch/openrisc/include/asm/atomic.h133
-rw-r--r--arch/openrisc/include/asm/barrier.h9
-rw-r--r--arch/openrisc/include/asm/bitops.h48
-rw-r--r--arch/openrisc/include/asm/bitops/__ffs.h29
-rw-r--r--arch/openrisc/include/asm/bitops/__fls.h29
-rw-r--r--arch/openrisc/include/asm/bitops/atomic.h123
-rw-r--r--arch/openrisc/include/asm/bitops/ffs.h28
-rw-r--r--arch/openrisc/include/asm/bitops/fls.h29
-rw-r--r--arch/openrisc/include/asm/bug.h11
-rw-r--r--arch/openrisc/include/asm/cache.h27
-rw-r--r--arch/openrisc/include/asm/cacheflush.h79
-rw-r--r--arch/openrisc/include/asm/cmpxchg.h171
-rw-r--r--arch/openrisc/include/asm/cpuinfo.h35
-rw-r--r--arch/openrisc/include/asm/delay.h20
-rw-r--r--arch/openrisc/include/asm/elf.h61
-rw-r--r--arch/openrisc/include/asm/fixmap.h84
-rw-r--r--arch/openrisc/include/asm/futex.h104
-rw-r--r--arch/openrisc/include/asm/io.h39
-rw-r--r--arch/openrisc/include/asm/irq.h23
-rw-r--r--arch/openrisc/include/asm/irqflags.h25
-rw-r--r--arch/openrisc/include/asm/linkage.h21
-rw-r--r--arch/openrisc/include/asm/mmu.h22
-rw-r--r--arch/openrisc/include/asm/mmu_context.h37
-rw-r--r--arch/openrisc/include/asm/page.h97
-rw-r--r--arch/openrisc/include/asm/pgalloc.h75
-rw-r--r--arch/openrisc/include/asm/pgtable.h436
-rw-r--r--arch/openrisc/include/asm/processor.h81
-rw-r--r--arch/openrisc/include/asm/ptrace.h120
-rw-r--r--arch/openrisc/include/asm/serial.h32
-rw-r--r--arch/openrisc/include/asm/setup.h15
-rw-r--r--arch/openrisc/include/asm/smp.h26
-rw-r--r--arch/openrisc/include/asm/spr.h38
-rw-r--r--arch/openrisc/include/asm/spr_defs.h614
-rw-r--r--arch/openrisc/include/asm/string.h11
-rw-r--r--arch/openrisc/include/asm/syscall.h64
-rw-r--r--arch/openrisc/include/asm/syscalls.h32
-rw-r--r--arch/openrisc/include/asm/thread_info.h116
-rw-r--r--arch/openrisc/include/asm/time.h23
-rw-r--r--arch/openrisc/include/asm/timex.h33
-rw-r--r--arch/openrisc/include/asm/tlb.h26
-rw-r--r--arch/openrisc/include/asm/tlbflush.h62
-rw-r--r--arch/openrisc/include/asm/uaccess.h238
-rw-r--r--arch/openrisc/include/asm/unwinder.h20
-rw-r--r--arch/openrisc/include/asm/vmalloc.h4
-rw-r--r--arch/openrisc/include/uapi/asm/Kbuild2
-rw-r--r--arch/openrisc/include/uapi/asm/byteorder.h1
-rw-r--r--arch/openrisc/include/uapi/asm/elf.h68
-rw-r--r--arch/openrisc/include/uapi/asm/param.h27
-rw-r--r--arch/openrisc/include/uapi/asm/ptrace.h40
-rw-r--r--arch/openrisc/include/uapi/asm/sigcontext.h37
-rw-r--r--arch/openrisc/include/uapi/asm/unistd.h33
-rw-r--r--arch/openrisc/kernel/.gitignore2
-rw-r--r--arch/openrisc/kernel/Makefile17
-rw-r--r--arch/openrisc/kernel/asm-offsets.c60
-rw-r--r--arch/openrisc/kernel/dma.c125
-rw-r--r--arch/openrisc/kernel/entry.S1244
-rw-r--r--arch/openrisc/kernel/head.S1577
-rw-r--r--arch/openrisc/kernel/irq.c38
-rw-r--r--arch/openrisc/kernel/module.c66
-rw-r--r--arch/openrisc/kernel/or32_ksyms.c46
-rw-r--r--arch/openrisc/kernel/process.c285
-rw-r--r--arch/openrisc/kernel/prom.c27
-rw-r--r--arch/openrisc/kernel/ptrace.c223
-rw-r--r--arch/openrisc/kernel/setup.c377
-rw-r--r--arch/openrisc/kernel/signal.c326
-rw-r--r--arch/openrisc/kernel/smp.c332
-rw-r--r--arch/openrisc/kernel/stacktrace.c100
-rw-r--r--arch/openrisc/kernel/sync-timer.c120
-rw-r--r--arch/openrisc/kernel/sys_call_table.c24
-rw-r--r--arch/openrisc/kernel/time.c179
-rw-r--r--arch/openrisc/kernel/traps.c427
-rw-r--r--arch/openrisc/kernel/unwinder.c105
-rw-r--r--arch/openrisc/kernel/vmlinux.h9
-rw-r--r--arch/openrisc/kernel/vmlinux.lds.S109
-rw-r--r--arch/openrisc/lib/Makefile6
-rw-r--r--arch/openrisc/lib/delay.c59
-rw-r--r--arch/openrisc/lib/memcpy.c125
-rw-r--r--arch/openrisc/lib/memset.S94
-rw-r--r--arch/openrisc/lib/string.S101
-rw-r--r--arch/openrisc/mm/Makefile6
-rw-r--r--arch/openrisc/mm/cache.c61
-rw-r--r--arch/openrisc/mm/fault.c353
-rw-r--r--arch/openrisc/mm/init.c228
-rw-r--r--arch/openrisc/mm/ioremap.c48
-rw-r--r--arch/openrisc/mm/tlb.c184
101 files changed, 11460 insertions, 0 deletions
diff --git a/arch/openrisc/Kbuild b/arch/openrisc/Kbuild
new file mode 100644
index 0000000000..b0b0f2b03f
--- /dev/null
+++ b/arch/openrisc/Kbuild
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y += lib/ kernel/ mm/
+obj-y += boot/dts/
+
+# for cleaning
+subdir- += boot
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
new file mode 100644
index 0000000000..fd9bb76a61
--- /dev/null
+++ b/arch/openrisc/Kconfig
@@ -0,0 +1,247 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.rst.
+#
+
+config OPENRISC
+ def_bool y
+ select ARCH_32BIT_OFF_T
+ select ARCH_HAS_DMA_SET_UNCACHED
+ select ARCH_HAS_DMA_CLEAR_UNCACHED
+ select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+ select COMMON_CLK
+ select OF
+ select OF_EARLY_FLATTREE
+ select IRQ_DOMAIN
+ select GPIOLIB
+ select HAVE_ARCH_TRACEHOOK
+ select SPARSE_IRQ
+ select GENERIC_IRQ_CHIP
+ select GENERIC_IRQ_PROBE
+ select GENERIC_IRQ_SHOW
+ select GENERIC_PCI_IOMAP
+ select GENERIC_IOREMAP
+ select GENERIC_CPU_DEVICES
+ select HAVE_PCI
+ select HAVE_UID16
+ select GENERIC_ATOMIC64
+ select GENERIC_CLOCKEVENTS_BROADCAST
+ select GENERIC_SMP_IDLE_THREAD
+ select MODULES_USE_ELF_RELA
+ select HAVE_DEBUG_STACKOVERFLOW
+ select OR1K_PIC
+ select CPU_NO_EFFICIENT_FFS if !OPENRISC_HAVE_INST_FF1
+ select ARCH_USE_QUEUED_RWLOCKS
+ select OMPIC if SMP
+ select PCI_DOMAINS_GENERIC if PCI
+ select PCI_MSI if PCI
+ select ARCH_WANT_FRAME_POINTERS
+ select GENERIC_IRQ_MULTI_HANDLER
+ select MMU_GATHER_NO_RANGE if MMU
+ select TRACE_IRQFLAGS_SUPPORT
+
+config CPU_BIG_ENDIAN
+ def_bool y
+
+config MMU
+ def_bool y
+
+config GENERIC_HWEIGHT
+ def_bool y
+
+config NO_IOPORT_MAP
+ def_bool y
+
+# For now, use generic checksum functions
+#These can be reimplemented in assembly later if so inclined
+config GENERIC_CSUM
+ def_bool y
+
+config STACKTRACE_SUPPORT
+ def_bool y
+
+config LOCKDEP_SUPPORT
+ def_bool y
+
+menu "Processor type and features"
+
+choice
+ prompt "Subarchitecture"
+ default OR1K_1200
+
+config OR1K_1200
+ bool "OR1200"
+ help
+ Generic OpenRISC 1200 architecture
+
+endchoice
+
+config DCACHE_WRITETHROUGH
+ bool "Have write through data caches"
+ default n
+ help
+ Select this if your implementation features write through data caches.
+ Selecting 'N' here will allow the kernel to force flushing of data
+ caches at relevant times. Most OpenRISC implementations support write-
+ through data caches.
+
+ If unsure say N here
+
+config OPENRISC_BUILTIN_DTB
+ string "Builtin DTB"
+ default ""
+
+menu "Class II Instructions"
+
+config OPENRISC_HAVE_INST_FF1
+ bool "Have instruction l.ff1"
+ default y
+ help
+ Select this if your implementation has the Class II instruction l.ff1
+
+config OPENRISC_HAVE_INST_FL1
+ bool "Have instruction l.fl1"
+ default y
+ help
+ Select this if your implementation has the Class II instruction l.fl1
+
+config OPENRISC_HAVE_INST_MUL
+ bool "Have instruction l.mul for hardware multiply"
+ default y
+ help
+ Select this if your implementation has a hardware multiply instruction
+
+config OPENRISC_HAVE_INST_DIV
+ bool "Have instruction l.div for hardware divide"
+ default y
+ help
+ Select this if your implementation has a hardware divide instruction
+
+config OPENRISC_HAVE_INST_CMOV
+ bool "Have instruction l.cmov for conditional move"
+ default n
+ help
+ This config enables gcc to generate l.cmov instructions when compiling
+ the kernel which in general will improve performance and reduce the
+ binary size.
+
+ Select this if your implementation has support for the Class II
+ l.cmov conistional move instruction.
+
+ Say N if you are unsure.
+
+config OPENRISC_HAVE_INST_ROR
+ bool "Have instruction l.ror for rotate right"
+ default n
+ help
+ This config enables gcc to generate l.ror instructions when compiling
+ the kernel which in general will improve performance and reduce the
+ binary size.
+
+ Select this if your implementation has support for the Class II
+ l.ror rotate right instruction.
+
+ Say N if you are unsure.
+
+config OPENRISC_HAVE_INST_RORI
+ bool "Have instruction l.rori for rotate right with immediate"
+ default n
+ help
+ This config enables gcc to generate l.rori instructions when compiling
+ the kernel which in general will improve performance and reduce the
+ binary size.
+
+ Select this if your implementation has support for the Class II
+ l.rori rotate right with immediate instruction.
+
+ Say N if you are unsure.
+
+config OPENRISC_HAVE_INST_SEXT
+ bool "Have instructions l.ext* for sign extension"
+ default n
+ help
+ This config enables gcc to generate l.ext* instructions when compiling
+ the kernel which in general will improve performance and reduce the
+ binary size.
+
+ Select this if your implementation has support for the Class II
+ l.exths, l.extbs, l.exthz and l.extbz size extend instructions.
+
+ Say N if you are unsure.
+
+endmenu
+
+config NR_CPUS
+ int "Maximum number of CPUs (2-32)"
+ range 2 32
+ depends on SMP
+ default "2"
+
+config SMP
+ bool "Symmetric Multi-Processing support"
+ help
+ This enables support for systems with more than one CPU. If you have
+ a system with only one CPU, say N. If you have a system with more
+ than one CPU, say Y.
+
+ If you don't know what to do here, say N.
+
+source "kernel/Kconfig.hz"
+
+config OPENRISC_NO_SPR_SR_DSX
+ bool "use SPR_SR_DSX software emulation" if OR1K_1200
+ default y
+ help
+ SPR_SR_DSX bit is status register bit indicating whether
+ the last exception has happened in delay slot.
+
+ OpenRISC architecture makes it optional to have it implemented
+ in hardware and the OR1200 does not have it.
+
+ Say N here if you know that your OpenRISC processor has
+ SPR_SR_DSX bit implemented. Say Y if you are unsure.
+
+config OPENRISC_HAVE_SHADOW_GPRS
+ bool "Support for shadow gpr files" if !SMP
+ default y if SMP
+ help
+ Say Y here if your OpenRISC processor features shadowed
+ register files. They will in such case be used as a
+ scratch reg storage on exception entry.
+
+ On SMP systems, this feature is mandatory.
+ On a unicore system it's safe to say N here if you are unsure.
+
+config CMDLINE
+ string "Default kernel command string"
+ default ""
+ help
+ On some architectures there is currently no way for the boot loader
+ to pass arguments to the kernel. For these architectures, you should
+ supply some command-line options at build time by entering them
+ here.
+
+menu "Debugging options"
+
+config JUMP_UPON_UNHANDLED_EXCEPTION
+ bool "Try to die gracefully"
+ default y
+ help
+ Now this puts kernel into infinite loop after first oops. Till
+ your kernel crashes this doesn't have any influence.
+
+ Say Y if you are unsure.
+
+config OPENRISC_ESR_EXCEPTION_BUG_CHECK
+ bool "Check for possible ESR exception bug"
+ default n
+ help
+ This option enables some checks that might expose some problems
+ in kernel.
+
+ Say N if you are unsure.
+
+endmenu
+
+endmenu
diff --git a/arch/openrisc/Kconfig.debug b/arch/openrisc/Kconfig.debug
new file mode 100644
index 0000000000..295942fe3f
--- /dev/null
+++ b/arch/openrisc/Kconfig.debug
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# dummy file, do not delete
diff --git a/arch/openrisc/Makefile b/arch/openrisc/Makefile
new file mode 100644
index 0000000000..68249521db
--- /dev/null
+++ b/arch/openrisc/Makefile
@@ -0,0 +1,63 @@
+# BK Id: %F% %I% %G% %U% %#%
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1994 by Linus Torvalds
+# Modifications for the OpenRISC architecture:
+# Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+# Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+#
+# Based on:
+# arch/i386/Makefile
+
+KBUILD_DEFCONFIG := or1ksim_defconfig
+
+OBJCOPYFLAGS := -O binary -R .note -R .comment -S
+LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
+
+KBUILD_CFLAGS += -pipe -ffixed-r10 -D__linux__
+KBUILD_CFLAGS += -msfimm -mshftimm
+
+all: vmlinux.bin
+
+boot := arch/$(ARCH)/boot
+
+ifeq ($(CONFIG_OPENRISC_HAVE_INST_MUL),y)
+ KBUILD_CFLAGS += $(call cc-option,-mhard-mul)
+else
+ KBUILD_CFLAGS += $(call cc-option,-msoft-mul)
+endif
+
+ifeq ($(CONFIG_OPENRISC_HAVE_INST_DIV),y)
+ KBUILD_CFLAGS += $(call cc-option,-mhard-div)
+else
+ KBUILD_CFLAGS += $(call cc-option,-msoft-div)
+endif
+
+ifeq ($(CONFIG_OPENRISC_HAVE_INST_CMOV),y)
+ KBUILD_CFLAGS += $(call cc-option,-mcmov)
+endif
+
+ifeq ($(CONFIG_OPENRISC_HAVE_INST_ROR),y)
+ KBUILD_CFLAGS += $(call cc-option,-mror)
+endif
+
+ifeq ($(CONFIG_OPENRISC_HAVE_INST_RORI),y)
+ KBUILD_CFLAGS += $(call cc-option,-mrori)
+endif
+
+ifeq ($(CONFIG_OPENRISC_HAVE_INST_SEXT),y)
+ KBUILD_CFLAGS += $(call cc-option,-msext)
+endif
+
+libs-y += $(LIBGCC)
+
+PHONY += vmlinux.bin
+
+vmlinux.bin: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
diff --git a/arch/openrisc/boot/.gitignore b/arch/openrisc/boot/.gitignore
new file mode 100644
index 0000000000..007d6fea31
--- /dev/null
+++ b/arch/openrisc/boot/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+vmlinux.bin
diff --git a/arch/openrisc/boot/Makefile b/arch/openrisc/boot/Makefile
new file mode 100644
index 0000000000..5b28538f4d
--- /dev/null
+++ b/arch/openrisc/boot/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for bootable kernel images
+#
+
+targets += vmlinux.bin
+
+OBJCOPYFLAGS_vmlinux.bin := -O binary
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
diff --git a/arch/openrisc/boot/dts/Makefile b/arch/openrisc/boot/dts/Makefile
new file mode 100644
index 0000000000..13db5a2aab
--- /dev/null
+++ b/arch/openrisc/boot/dts/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y += $(addsuffix .dtb.o, $(CONFIG_OPENRISC_BUILTIN_DTB))
+
+#DTC_FLAGS ?= -p 1024
diff --git a/arch/openrisc/boot/dts/or1klitex.dts b/arch/openrisc/boot/dts/or1klitex.dts
new file mode 100644
index 0000000000..91c7173c50
--- /dev/null
+++ b/arch/openrisc/boot/dts/or1klitex.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * LiteX-based System on Chip
+ *
+ * Copyright (C) 2019 Antmicro <www.antmicro.com>
+ */
+
+/dts-v1/;
+/ {
+ compatible = "opencores,or1ksim";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&pic>;
+
+ aliases {
+ serial0 = &serial0;
+ };
+
+ chosen {
+ bootargs = "console=liteuart";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "opencores,or1200-rtlsvn481";
+ reg = <0>;
+ clock-frequency = <100000000>;
+ };
+ };
+
+ pic: pic {
+ compatible = "opencores,or1k-pic";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+
+ serial0: serial@e0006800 {
+ device_type = "serial";
+ compatible = "litex,liteuart";
+ reg = <0xe0006800 0x100>;
+ };
+
+ soc_ctrl0: soc_controller@e0000000 {
+ compatible = "litex,soc-controller";
+ reg = <0xe0000000 0xc>;
+ status = "okay";
+ };
+
+ ethernet@e0001000 {
+ compatible = "litex,liteeth";
+ reg = <0xe0001000 0x7c>,
+ <0xe0001800 0x0a>,
+ <0x80000000 0x2000>;
+ reg-names = "mac", "mdio", "buffer";
+ interrupts = <2>;
+ };
+};
diff --git a/arch/openrisc/boot/dts/or1ksim.dts b/arch/openrisc/boot/dts/or1ksim.dts
new file mode 100644
index 0000000000..c0cb74e52f
--- /dev/null
+++ b/arch/openrisc/boot/dts/or1ksim.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/ {
+ compatible = "opencores,or1ksim";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&pic>;
+
+ aliases {
+ uart0 = &serial0;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "uart0:115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x02000000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "opencores,or1200-rtlsvn481";
+ reg = <0>;
+ clock-frequency = <20000000>;
+ };
+ };
+
+ /*
+ * OR1K PIC is built into CPU and accessed via special purpose
+ * registers. It is not addressable and, hence, has no 'reg'
+ * property.
+ */
+ pic: pic {
+ compatible = "opencores,or1k-pic";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+
+ serial0: serial@90000000 {
+ compatible = "opencores,uart16550-rtlsvn105", "ns16550a";
+ reg = <0x90000000 0x100>;
+ interrupts = <2>;
+ clock-frequency = <20000000>;
+ };
+
+ enet0: ethoc@92000000 {
+ compatible = "opencores,ethoc";
+ reg = <0x92000000 0x800>;
+ interrupts = <4>;
+ big-endian;
+ };
+};
diff --git a/arch/openrisc/boot/dts/simple_smp.dts b/arch/openrisc/boot/dts/simple_smp.dts
new file mode 100644
index 0000000000..71af0e117b
--- /dev/null
+++ b/arch/openrisc/boot/dts/simple_smp.dts
@@ -0,0 +1,69 @@
+/dts-v1/;
+/ {
+ compatible = "opencores,or1ksim";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&pic>;
+
+ aliases {
+ uart0 = &serial0;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "uart0:115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x02000000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "opencores,or1200-rtlsvn481";
+ reg = <0>;
+ clock-frequency = <20000000>;
+ };
+ cpu@1 {
+ compatible = "opencores,or1200-rtlsvn481";
+ reg = <1>;
+ clock-frequency = <20000000>;
+ };
+ };
+
+ ompic: ompic@98000000 {
+ compatible = "openrisc,ompic";
+ reg = <0x98000000 16>;
+ interrupt-controller;
+ #interrupt-cells = <0>;
+ interrupts = <1>;
+ };
+
+ /*
+ * OR1K PIC is built into CPU and accessed via special purpose
+ * registers. It is not addressable and, hence, has no 'reg'
+ * property.
+ */
+ pic: pic {
+ compatible = "opencores,or1k-pic-level";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+
+ serial0: serial@90000000 {
+ compatible = "opencores,uart16550-rtlsvn105", "ns16550a";
+ reg = <0x90000000 0x100>;
+ interrupts = <2>;
+ clock-frequency = <20000000>;
+ };
+
+ enet0: ethoc@92000000 {
+ compatible = "opencores,ethoc";
+ reg = <0x92000000 0x800>;
+ interrupts = <4>;
+ big-endian;
+ };
+};
diff --git a/arch/openrisc/configs/or1klitex_defconfig b/arch/openrisc/configs/or1klitex_defconfig
new file mode 100644
index 0000000000..466f31a091
--- /dev/null
+++ b/arch/openrisc/configs/or1klitex_defconfig
@@ -0,0 +1,56 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_CGROUPS=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SGETMASK_SYSCALL=y
+CONFIG_EXPERT=y
+CONFIG_OPENRISC_BUILTIN_DTB="or1klitex"
+CONFIG_HZ_100=y
+CONFIG_OPENRISC_HAVE_SHADOW_GPRS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_INET_UDP_DIAG=y
+CONFIG_INET_RAW_DIAG=y
+# CONFIG_WIRELESS is not set
+# CONFIG_ETHTOOL_NETLINK is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_OF_OVERLAY=y
+CONFIG_NETDEVICES=y
+CONFIG_LITEX_LITEETH=y
+# CONFIG_WLAN is not set
+CONFIG_SERIAL_LITEUART=y
+CONFIG_SERIAL_LITEUART_CONSOLE=y
+CONFIG_TTY_PRINTK=y
+# CONFIG_GPIO_CDEV is not set
+CONFIG_MMC=y
+CONFIG_MMC_LITEX=y
+# CONFIG_VHOST_MENU is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_LITEX_SOC_CONTROLLER=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_EXFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,bpf"
+CONFIG_PRINTK_TIME=y
+CONFIG_PANIC_ON_OOPS=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BUG_ON_DATA_CORRUPTION=y
diff --git a/arch/openrisc/configs/or1ksim_defconfig b/arch/openrisc/configs/or1ksim_defconfig
new file mode 100644
index 0000000000..0116e46523
--- /dev/null
+++ b/arch/openrisc/configs/or1ksim_defconfig
@@ -0,0 +1,56 @@
+CONFIG_NO_HZ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_GZIP is not set
+CONFIG_EXPERT=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_EPOLL is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
+CONFIG_MODULES=y
+# CONFIG_BLOCK is not set
+CONFIG_OPENRISC_BUILTIN_DTB="or1ksim"
+CONFIG_HZ_100=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_NETDEVICES=y
+CONFIG_ETHOC=y
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/openrisc/configs/simple_smp_defconfig b/arch/openrisc/configs/simple_smp_defconfig
new file mode 100644
index 0000000000..b990cb6c93
--- /dev/null
+++ b/arch/openrisc/configs/simple_smp_defconfig
@@ -0,0 +1,65 @@
+CONFIG_LOCALVERSION="-simple-smp"
+CONFIG_NO_HZ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_EXPERT=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_EPOLL is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
+CONFIG_MODULES=y
+# CONFIG_BLOCK is not set
+CONFIG_OPENRISC_BUILTIN_DTB="simple_smp"
+CONFIG_SMP=y
+CONFIG_HZ_100=y
+CONFIG_OPENRISC_HAVE_SHADOW_GPRS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_NETDEVICES=y
+CONFIG_ETHOC=y
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_XZ_DEC=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_RCU_TRACE is not set
diff --git a/arch/openrisc/configs/virt_defconfig b/arch/openrisc/configs/virt_defconfig
new file mode 100644
index 0000000000..c1b69166c5
--- /dev/null
+++ b/arch/openrisc/configs/virt_defconfig
@@ -0,0 +1,108 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_OPENRISC_HAVE_INST_CMOV=y
+CONFIG_OPENRISC_HAVE_INST_ROR=y
+CONFIG_OPENRISC_HAVE_INST_RORI=y
+CONFIG_OPENRISC_HAVE_INST_SEXT=y
+CONFIG_NR_CPUS=8
+CONFIG_SMP=y
+CONFIG_HZ_100=y
+# CONFIG_OPENRISC_NO_SPR_SR_DSX is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
+CONFIG_ETHOC=y
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_VIRTIO_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
+CONFIG_SYSCON_REBOOT_MODE=y
+# CONFIG_HWMON is not set
+CONFIG_DRM=y
+# CONFIG_DRM_FBDEV_EMULATION is not set
+CONFIG_DRM_VIRTIO_GPU=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_INTEL8X0=y
+CONFIG_SND_INTEL8X0M=y
+CONFIG_SND_SOC=y
+CONFIG_SND_VIRTIO=y
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_ITE is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_REDRAGON is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PLATFORM=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_GADGET=y
+CONFIG_TYPEC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GOLDFISH=y
+CONFIG_VIRT_DRIVERS=y
+CONFIG_VIRTIO_PCI=y
+# CONFIG_VIRTIO_PCI_LEGACY is not set
+CONFIG_VIRTIO_INPUT=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_EXFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_UNICODE=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_FTRACE=y
diff --git a/arch/openrisc/include/asm/Kbuild b/arch/openrisc/include/asm/Kbuild
new file mode 100644
index 0000000000..c8c99b554c
--- /dev/null
+++ b/arch/openrisc/include/asm/Kbuild
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+generic-y += extable.h
+generic-y += kvm_para.h
+generic-y += parport.h
+generic-y += spinlock_types.h
+generic-y += spinlock.h
+generic-y += qrwlock_types.h
+generic-y += qrwlock.h
+generic-y += user.h
diff --git a/arch/openrisc/include/asm/asm-offsets.h b/arch/openrisc/include/asm/asm-offsets.h
new file mode 100644
index 0000000000..d370ee36a1
--- /dev/null
+++ b/arch/openrisc/include/asm/asm-offsets.h
@@ -0,0 +1 @@
+#include <generated/asm-offsets.h>
diff --git a/arch/openrisc/include/asm/atomic.h b/arch/openrisc/include/asm/atomic.h
new file mode 100644
index 0000000000..8ce67ec7c9
--- /dev/null
+++ b/arch/openrisc/include/asm/atomic.h
@@ -0,0 +1,133 @@
+/*
+ * Copyright (C) 2014 Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_OPENRISC_ATOMIC_H
+#define __ASM_OPENRISC_ATOMIC_H
+
+#include <linux/types.h>
+
+/* Atomically perform op with v->counter and i */
+#define ATOMIC_OP(op) \
+static inline void arch_atomic_##op(int i, atomic_t *v) \
+{ \
+ int tmp; \
+ \
+ __asm__ __volatile__( \
+ "1: l.lwa %0,0(%1) \n" \
+ " l." #op " %0,%0,%2 \n" \
+ " l.swa 0(%1),%0 \n" \
+ " l.bnf 1b \n" \
+ " l.nop \n" \
+ : "=&r"(tmp) \
+ : "r"(&v->counter), "r"(i) \
+ : "cc", "memory"); \
+}
+
+/* Atomically perform op with v->counter and i, return the result */
+#define ATOMIC_OP_RETURN(op) \
+static inline int arch_atomic_##op##_return(int i, atomic_t *v) \
+{ \
+ int tmp; \
+ \
+ __asm__ __volatile__( \
+ "1: l.lwa %0,0(%1) \n" \
+ " l." #op " %0,%0,%2 \n" \
+ " l.swa 0(%1),%0 \n" \
+ " l.bnf 1b \n" \
+ " l.nop \n" \
+ : "=&r"(tmp) \
+ : "r"(&v->counter), "r"(i) \
+ : "cc", "memory"); \
+ \
+ return tmp; \
+}
+
+/* Atomically perform op with v->counter and i, return orig v->counter */
+#define ATOMIC_FETCH_OP(op) \
+static inline int arch_atomic_fetch_##op(int i, atomic_t *v) \
+{ \
+ int tmp, old; \
+ \
+ __asm__ __volatile__( \
+ "1: l.lwa %0,0(%2) \n" \
+ " l." #op " %1,%0,%3 \n" \
+ " l.swa 0(%2),%1 \n" \
+ " l.bnf 1b \n" \
+ " l.nop \n" \
+ : "=&r"(old), "=&r"(tmp) \
+ : "r"(&v->counter), "r"(i) \
+ : "cc", "memory"); \
+ \
+ return old; \
+}
+
+ATOMIC_OP_RETURN(add)
+ATOMIC_OP_RETURN(sub)
+
+ATOMIC_FETCH_OP(add)
+ATOMIC_FETCH_OP(sub)
+ATOMIC_FETCH_OP(and)
+ATOMIC_FETCH_OP(or)
+ATOMIC_FETCH_OP(xor)
+
+ATOMIC_OP(add)
+ATOMIC_OP(sub)
+ATOMIC_OP(and)
+ATOMIC_OP(or)
+ATOMIC_OP(xor)
+
+#undef ATOMIC_FETCH_OP
+#undef ATOMIC_OP_RETURN
+#undef ATOMIC_OP
+
+#define arch_atomic_add_return arch_atomic_add_return
+#define arch_atomic_sub_return arch_atomic_sub_return
+#define arch_atomic_fetch_add arch_atomic_fetch_add
+#define arch_atomic_fetch_sub arch_atomic_fetch_sub
+#define arch_atomic_fetch_and arch_atomic_fetch_and
+#define arch_atomic_fetch_or arch_atomic_fetch_or
+#define arch_atomic_fetch_xor arch_atomic_fetch_xor
+#define arch_atomic_add arch_atomic_add
+#define arch_atomic_sub arch_atomic_sub
+#define arch_atomic_and arch_atomic_and
+#define arch_atomic_or arch_atomic_or
+#define arch_atomic_xor arch_atomic_xor
+
+/*
+ * Atomically add a to v->counter as long as v is not already u.
+ * Returns the original value at v->counter.
+ *
+ * This is often used through atomic_inc_not_zero()
+ */
+static inline int arch_atomic_fetch_add_unless(atomic_t *v, int a, int u)
+{
+ int old, tmp;
+
+ __asm__ __volatile__(
+ "1: l.lwa %0, 0(%2) \n"
+ " l.sfeq %0, %4 \n"
+ " l.bf 2f \n"
+ " l.add %1, %0, %3 \n"
+ " l.swa 0(%2), %1 \n"
+ " l.bnf 1b \n"
+ " l.nop \n"
+ "2: \n"
+ : "=&r"(old), "=&r" (tmp)
+ : "r"(&v->counter), "r"(a), "r"(u)
+ : "cc", "memory");
+
+ return old;
+}
+#define arch_atomic_fetch_add_unless arch_atomic_fetch_add_unless
+
+#define arch_atomic_read(v) READ_ONCE((v)->counter)
+#define arch_atomic_set(v,i) WRITE_ONCE((v)->counter, (i))
+
+#include <asm/cmpxchg.h>
+
+#endif /* __ASM_OPENRISC_ATOMIC_H */
diff --git a/arch/openrisc/include/asm/barrier.h b/arch/openrisc/include/asm/barrier.h
new file mode 100644
index 0000000000..7538294721
--- /dev/null
+++ b/arch/openrisc/include/asm/barrier.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_BARRIER_H
+#define __ASM_BARRIER_H
+
+#define mb() asm volatile ("l.msync" ::: "memory")
+
+#include <asm-generic/barrier.h>
+
+#endif /* __ASM_BARRIER_H */
diff --git a/arch/openrisc/include/asm/bitops.h b/arch/openrisc/include/asm/bitops.h
new file mode 100644
index 0000000000..d773ed938a
--- /dev/null
+++ b/arch/openrisc/include/asm/bitops.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef __ASM_OPENRISC_BITOPS_H
+#define __ASM_OPENRISC_BITOPS_H
+
+/*
+ * Where we haven't written assembly versions yet, we fall back to the
+ * generic implementations. Otherwise, we pull in our (hopefully)
+ * optimized versions.
+ */
+
+#include <linux/irqflags.h>
+#include <linux/compiler.h>
+#include <asm/barrier.h>
+
+#include <asm/bitops/__ffs.h>
+#include <asm-generic/bitops/ffz.h>
+#include <asm/bitops/fls.h>
+#include <asm/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm-generic/bitops/sched.h>
+#include <asm/bitops/ffs.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+#include <asm/bitops/atomic.h>
+#include <asm-generic/bitops/non-atomic.h>
+#include <asm-generic/bitops/le.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+
+#endif /* __ASM_GENERIC_BITOPS_H */
diff --git a/arch/openrisc/include/asm/bitops/__ffs.h b/arch/openrisc/include/asm/bitops/__ffs.h
new file mode 100644
index 0000000000..1e224b616f
--- /dev/null
+++ b/arch/openrisc/include/asm/bitops/__ffs.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#ifndef __ASM_OPENRISC___FFS_H
+#define __ASM_OPENRISC___FFS_H
+
+
+#ifdef CONFIG_OPENRISC_HAVE_INST_FF1
+
+static inline unsigned long __ffs(unsigned long x)
+{
+ int ret;
+
+ __asm__ ("l.ff1 %0,%1"
+ : "=r" (ret)
+ : "r" (x));
+
+ return ret-1;
+}
+
+#else
+#include <asm-generic/bitops/__ffs.h>
+#endif
+
+#endif /* __ASM_OPENRISC___FFS_H */
diff --git a/arch/openrisc/include/asm/bitops/__fls.h b/arch/openrisc/include/asm/bitops/__fls.h
new file mode 100644
index 0000000000..9658446ad1
--- /dev/null
+++ b/arch/openrisc/include/asm/bitops/__fls.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#ifndef __ASM_OPENRISC___FLS_H
+#define __ASM_OPENRISC___FLS_H
+
+
+#ifdef CONFIG_OPENRISC_HAVE_INST_FL1
+
+static inline unsigned long __fls(unsigned long x)
+{
+ int ret;
+
+ __asm__ ("l.fl1 %0,%1"
+ : "=r" (ret)
+ : "r" (x));
+
+ return ret-1;
+}
+
+#else
+#include <asm-generic/bitops/__fls.h>
+#endif
+
+#endif /* __ASM_OPENRISC___FLS_H */
diff --git a/arch/openrisc/include/asm/bitops/atomic.h b/arch/openrisc/include/asm/bitops/atomic.h
new file mode 100644
index 0000000000..35fb85f61b
--- /dev/null
+++ b/arch/openrisc/include/asm/bitops/atomic.h
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2014 Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_OPENRISC_BITOPS_ATOMIC_H
+#define __ASM_OPENRISC_BITOPS_ATOMIC_H
+
+static inline void set_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+ unsigned long tmp;
+
+ __asm__ __volatile__(
+ "1: l.lwa %0,0(%1) \n"
+ " l.or %0,%0,%2 \n"
+ " l.swa 0(%1),%0 \n"
+ " l.bnf 1b \n"
+ " l.nop \n"
+ : "=&r"(tmp)
+ : "r"(p), "r"(mask)
+ : "cc", "memory");
+}
+
+static inline void clear_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+ unsigned long tmp;
+
+ __asm__ __volatile__(
+ "1: l.lwa %0,0(%1) \n"
+ " l.and %0,%0,%2 \n"
+ " l.swa 0(%1),%0 \n"
+ " l.bnf 1b \n"
+ " l.nop \n"
+ : "=&r"(tmp)
+ : "r"(p), "r"(~mask)
+ : "cc", "memory");
+}
+
+static inline void change_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+ unsigned long tmp;
+
+ __asm__ __volatile__(
+ "1: l.lwa %0,0(%1) \n"
+ " l.xor %0,%0,%2 \n"
+ " l.swa 0(%1),%0 \n"
+ " l.bnf 1b \n"
+ " l.nop \n"
+ : "=&r"(tmp)
+ : "r"(p), "r"(mask)
+ : "cc", "memory");
+}
+
+static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+ unsigned long old;
+ unsigned long tmp;
+
+ __asm__ __volatile__(
+ "1: l.lwa %0,0(%2) \n"
+ " l.or %1,%0,%3 \n"
+ " l.swa 0(%2),%1 \n"
+ " l.bnf 1b \n"
+ " l.nop \n"
+ : "=&r"(old), "=&r"(tmp)
+ : "r"(p), "r"(mask)
+ : "cc", "memory");
+
+ return (old & mask) != 0;
+}
+
+static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+ unsigned long old;
+ unsigned long tmp;
+
+ __asm__ __volatile__(
+ "1: l.lwa %0,0(%2) \n"
+ " l.and %1,%0,%3 \n"
+ " l.swa 0(%2),%1 \n"
+ " l.bnf 1b \n"
+ " l.nop \n"
+ : "=&r"(old), "=&r"(tmp)
+ : "r"(p), "r"(~mask)
+ : "cc", "memory");
+
+ return (old & mask) != 0;
+}
+
+static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+ unsigned long old;
+ unsigned long tmp;
+
+ __asm__ __volatile__(
+ "1: l.lwa %0,0(%2) \n"
+ " l.xor %1,%0,%3 \n"
+ " l.swa 0(%2),%1 \n"
+ " l.bnf 1b \n"
+ " l.nop \n"
+ : "=&r"(old), "=&r"(tmp)
+ : "r"(p), "r"(mask)
+ : "cc", "memory");
+
+ return (old & mask) != 0;
+}
+
+#endif /* __ASM_OPENRISC_BITOPS_ATOMIC_H */
diff --git a/arch/openrisc/include/asm/bitops/ffs.h b/arch/openrisc/include/asm/bitops/ffs.h
new file mode 100644
index 0000000000..b4c835d6bc
--- /dev/null
+++ b/arch/openrisc/include/asm/bitops/ffs.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#ifndef __ASM_OPENRISC_FFS_H
+#define __ASM_OPENRISC_FFS_H
+
+#ifdef CONFIG_OPENRISC_HAVE_INST_FF1
+
+static inline int ffs(int x)
+{
+ int ret;
+
+ __asm__ ("l.ff1 %0,%1"
+ : "=r" (ret)
+ : "r" (x));
+
+ return ret;
+}
+
+#else
+#include <asm-generic/bitops/ffs.h>
+#endif
+
+#endif /* __ASM_OPENRISC_FFS_H */
diff --git a/arch/openrisc/include/asm/bitops/fls.h b/arch/openrisc/include/asm/bitops/fls.h
new file mode 100644
index 0000000000..6b77f6556f
--- /dev/null
+++ b/arch/openrisc/include/asm/bitops/fls.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#ifndef __ASM_OPENRISC_FLS_H
+#define __ASM_OPENRISC_FLS_H
+
+
+#ifdef CONFIG_OPENRISC_HAVE_INST_FL1
+
+static inline int fls(unsigned int x)
+{
+ int ret;
+
+ __asm__ ("l.fl1 %0,%1"
+ : "=r" (ret)
+ : "r" (x));
+
+ return ret;
+}
+
+#else
+#include <asm-generic/bitops/fls.h>
+#endif
+
+#endif /* __ASM_OPENRISC_FLS_H */
diff --git a/arch/openrisc/include/asm/bug.h b/arch/openrisc/include/asm/bug.h
new file mode 100644
index 0000000000..6d04776eaf
--- /dev/null
+++ b/arch/openrisc/include/asm/bug.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __ASM_OPENRISC_BUG_H
+#define __ASM_OPENRISC_BUG_H
+
+#include <asm-generic/bug.h>
+
+struct pt_regs;
+
+void __noreturn die(const char *str, struct pt_regs *regs, long err);
+
+#endif /* __ASM_OPENRISC_BUG_H */
diff --git a/arch/openrisc/include/asm/cache.h b/arch/openrisc/include/asm/cache.h
new file mode 100644
index 0000000000..fbc3f8cae9
--- /dev/null
+++ b/arch/openrisc/include/asm/cache.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef __ASM_OPENRISC_CACHE_H
+#define __ASM_OPENRISC_CACHE_H
+
+/* FIXME: How can we replace these with values from the CPU...
+ * they shouldn't be hard-coded!
+ */
+
+#define __ro_after_init __read_mostly
+
+#define L1_CACHE_BYTES 16
+#define L1_CACHE_SHIFT 4
+
+#endif /* __ASM_OPENRISC_CACHE_H */
diff --git a/arch/openrisc/include/asm/cacheflush.h b/arch/openrisc/include/asm/cacheflush.h
new file mode 100644
index 0000000000..984c331ff5
--- /dev/null
+++ b/arch/openrisc/include/asm/cacheflush.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) Jan Henrik Weinstock <jan.weinstock@rwth-aachen.de>
+ * et al.
+ */
+
+#ifndef __ASM_CACHEFLUSH_H
+#define __ASM_CACHEFLUSH_H
+
+#include <linux/mm.h>
+
+/*
+ * Helper function for flushing or invalidating entire pages from data
+ * and instruction caches. SMP needs a little extra work, since we need
+ * to flush the pages on all cpus.
+ */
+extern void local_dcache_page_flush(struct page *page);
+extern void local_icache_page_inv(struct page *page);
+
+/*
+ * Data cache flushing always happen on the local cpu. Instruction cache
+ * invalidations need to be broadcasted to all other cpu in the system in
+ * case of SMP configurations.
+ */
+#ifndef CONFIG_SMP
+#define dcache_page_flush(page) local_dcache_page_flush(page)
+#define icache_page_inv(page) local_icache_page_inv(page)
+#else /* CONFIG_SMP */
+#define dcache_page_flush(page) local_dcache_page_flush(page)
+#define icache_page_inv(page) smp_icache_page_inv(page)
+extern void smp_icache_page_inv(struct page *page);
+#endif /* CONFIG_SMP */
+
+/*
+ * Synchronizes caches. Whenever a cpu writes executable code to memory, this
+ * should be called to make sure the processor sees the newly written code.
+ */
+static inline void sync_icache_dcache(struct page *page)
+{
+ if (!IS_ENABLED(CONFIG_DCACHE_WRITETHROUGH))
+ dcache_page_flush(page);
+ icache_page_inv(page);
+}
+
+/*
+ * Pages with this bit set need not be flushed/invalidated, since
+ * they have not changed since last flush. New pages start with
+ * PG_arch_1 not set and are therefore dirty by default.
+ */
+#define PG_dc_clean PG_arch_1
+
+static inline void flush_dcache_folio(struct folio *folio)
+{
+ clear_bit(PG_dc_clean, &folio->flags);
+}
+#define flush_dcache_folio flush_dcache_folio
+
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
+static inline void flush_dcache_page(struct page *page)
+{
+ flush_dcache_folio(page_folio(page));
+}
+
+#define flush_icache_user_page(vma, page, addr, len) \
+do { \
+ if (vma->vm_flags & VM_EXEC) \
+ sync_icache_dcache(page); \
+} while (0)
+
+#include <asm-generic/cacheflush.h>
+
+#endif /* __ASM_CACHEFLUSH_H */
diff --git a/arch/openrisc/include/asm/cmpxchg.h b/arch/openrisc/include/asm/cmpxchg.h
new file mode 100644
index 0000000000..8ee151c072
--- /dev/null
+++ b/arch/openrisc/include/asm/cmpxchg.h
@@ -0,0 +1,171 @@
+/*
+ * 1,2 and 4 byte cmpxchg and xchg implementations for OpenRISC.
+ *
+ * Copyright (C) 2014 Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
+ * Copyright (C) 2017 Stafford Horne <shorne@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ * Note:
+ * The portable implementations of 1 and 2 byte xchg and cmpxchg using a 4
+ * byte cmpxchg is sourced heavily from the sh and mips implementations.
+ */
+
+#ifndef __ASM_OPENRISC_CMPXCHG_H
+#define __ASM_OPENRISC_CMPXCHG_H
+
+#include <linux/bits.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long cmpxchg_u32(volatile void *ptr,
+ unsigned long old, unsigned long new)
+{
+ __asm__ __volatile__(
+ "1: l.lwa %0, 0(%1) \n"
+ " l.sfeq %0, %2 \n"
+ " l.bnf 2f \n"
+ " l.nop \n"
+ " l.swa 0(%1), %3 \n"
+ " l.bnf 1b \n"
+ " l.nop \n"
+ "2: \n"
+ : "=&r"(old)
+ : "r"(ptr), "r"(old), "r"(new)
+ : "cc", "memory");
+
+ return old;
+}
+
+static inline unsigned long xchg_u32(volatile void *ptr,
+ unsigned long val)
+{
+ __asm__ __volatile__(
+ "1: l.lwa %0, 0(%1) \n"
+ " l.swa 0(%1), %2 \n"
+ " l.bnf 1b \n"
+ " l.nop \n"
+ : "=&r"(val)
+ : "r"(ptr), "r"(val)
+ : "cc", "memory");
+
+ return val;
+}
+
+static inline u32 cmpxchg_small(volatile void *ptr, u32 old, u32 new,
+ int size)
+{
+ int off = (unsigned long)ptr % sizeof(u32);
+ volatile u32 *p = ptr - off;
+#ifdef __BIG_ENDIAN
+ int bitoff = (sizeof(u32) - size - off) * BITS_PER_BYTE;
+#else
+ int bitoff = off * BITS_PER_BYTE;
+#endif
+ u32 bitmask = ((0x1 << size * BITS_PER_BYTE) - 1) << bitoff;
+ u32 load32, old32, new32;
+ u32 ret;
+
+ load32 = READ_ONCE(*p);
+
+ while (true) {
+ ret = (load32 & bitmask) >> bitoff;
+ if (old != ret)
+ return ret;
+
+ old32 = (load32 & ~bitmask) | (old << bitoff);
+ new32 = (load32 & ~bitmask) | (new << bitoff);
+
+ /* Do 32 bit cmpxchg */
+ load32 = cmpxchg_u32(p, old32, new32);
+ if (load32 == old32)
+ return old;
+ }
+}
+
+/* xchg */
+
+static inline u32 xchg_small(volatile void *ptr, u32 x, int size)
+{
+ int off = (unsigned long)ptr % sizeof(u32);
+ volatile u32 *p = ptr - off;
+#ifdef __BIG_ENDIAN
+ int bitoff = (sizeof(u32) - size - off) * BITS_PER_BYTE;
+#else
+ int bitoff = off * BITS_PER_BYTE;
+#endif
+ u32 bitmask = ((0x1 << size * BITS_PER_BYTE) - 1) << bitoff;
+ u32 oldv, newv;
+ u32 ret;
+
+ do {
+ oldv = READ_ONCE(*p);
+ ret = (oldv & bitmask) >> bitoff;
+ newv = (oldv & ~bitmask) | (x << bitoff);
+ } while (cmpxchg_u32(p, oldv, newv) != oldv);
+
+ return ret;
+}
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg().
+ */
+extern unsigned long __cmpxchg_called_with_bad_pointer(void)
+ __compiletime_error("Bad argument size for cmpxchg");
+
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+ unsigned long new, int size)
+{
+ switch (size) {
+ case 1:
+ case 2:
+ return cmpxchg_small(ptr, old, new, size);
+ case 4:
+ return cmpxchg_u32(ptr, old, new);
+ default:
+ return __cmpxchg_called_with_bad_pointer();
+ }
+}
+
+#define arch_cmpxchg(ptr, o, n) \
+ ({ \
+ (__typeof__(*(ptr))) __cmpxchg((ptr), \
+ (unsigned long)(o), \
+ (unsigned long)(n), \
+ sizeof(*(ptr))); \
+ })
+
+/*
+ * This function doesn't exist, so you'll get a linker error if
+ * something tries to do an invalidly-sized xchg().
+ */
+extern unsigned long __xchg_called_with_bad_pointer(void)
+ __compiletime_error("Bad argument size for xchg");
+
+static inline unsigned long
+__arch_xchg(volatile void *ptr, unsigned long with, int size)
+{
+ switch (size) {
+ case 1:
+ case 2:
+ return xchg_small(ptr, with, size);
+ case 4:
+ return xchg_u32(ptr, with);
+ default:
+ return __xchg_called_with_bad_pointer();
+ }
+}
+
+#define arch_xchg(ptr, with) \
+ ({ \
+ (__typeof__(*(ptr))) __arch_xchg((ptr), \
+ (unsigned long)(with), \
+ sizeof(*(ptr))); \
+ })
+
+#endif /* __ASM_OPENRISC_CMPXCHG_H */
diff --git a/arch/openrisc/include/asm/cpuinfo.h b/arch/openrisc/include/asm/cpuinfo.h
new file mode 100644
index 0000000000..5e4744153d
--- /dev/null
+++ b/arch/openrisc/include/asm/cpuinfo.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef __ASM_OPENRISC_CPUINFO_H
+#define __ASM_OPENRISC_CPUINFO_H
+
+struct cpuinfo_or1k {
+ u32 clock_frequency;
+
+ u32 icache_size;
+ u32 icache_block_size;
+ u32 icache_ways;
+
+ u32 dcache_size;
+ u32 dcache_block_size;
+ u32 dcache_ways;
+
+ u16 coreid;
+};
+
+extern struct cpuinfo_or1k cpuinfo_or1k[NR_CPUS];
+extern void setup_cpuinfo(void);
+
+#endif /* __ASM_OPENRISC_CPUINFO_H */
diff --git a/arch/openrisc/include/asm/delay.h b/arch/openrisc/include/asm/delay.h
new file mode 100644
index 0000000000..b32919ee0b
--- /dev/null
+++ b/arch/openrisc/include/asm/delay.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#ifndef __ASM_OPENRISC_DELAY_H
+#define __ASM_OPENRISC_DELAY_H
+
+#include <asm-generic/delay.h>
+
+extern unsigned long loops_per_jiffy;
+
+#endif
diff --git a/arch/openrisc/include/asm/elf.h b/arch/openrisc/include/asm/elf.h
new file mode 100644
index 0000000000..f2dc5364e3
--- /dev/null
+++ b/arch/openrisc/include/asm/elf.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+#ifndef __ASM_OPENRISC_ELF_H
+#define __ASM_OPENRISC_ELF_H
+
+
+#include <linux/types.h>
+#include <uapi/asm/elf.h>
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+
+#define elf_check_arch(x) \
+ (((x)->e_machine == EM_OR32) || ((x)->e_machine == EM_OPENRISC))
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#define ELF_ET_DYN_BASE (0x08000000)
+
+/*
+ * Enable dump using regset.
+ * This covers all of general/DSP/FPU regs.
+ */
+#define CORE_DUMP_USE_REGSET
+
+#define ELF_EXEC_PAGESIZE 8192
+
+extern void dump_elf_thread(elf_greg_t *dest, struct pt_regs *pt);
+#define ELF_CORE_COPY_REGS(dest, regs) dump_elf_thread(dest, regs);
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this cpu supports. This could be done in userspace,
+ but it's not easy, and we've already done it here. */
+
+#define ELF_HWCAP (0)
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo.
+
+ For the moment, we have only optimizations for the Intel generations,
+ but that could change... */
+
+#define ELF_PLATFORM (NULL)
+
+#endif
diff --git a/arch/openrisc/include/asm/fixmap.h b/arch/openrisc/include/asm/fixmap.h
new file mode 100644
index 0000000000..ad78e50b7b
--- /dev/null
+++ b/arch/openrisc/include/asm/fixmap.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef __ASM_OPENRISC_FIXMAP_H
+#define __ASM_OPENRISC_FIXMAP_H
+
+/* Why exactly do we need 2 empty pages between the top of the fixed
+ * addresses and the top of virtual memory? Something is using that
+ * memory space but not sure what right now... If you find it, leave
+ * a comment here.
+ */
+#define FIXADDR_TOP ((unsigned long) (-2*PAGE_SIZE))
+
+#include <linux/kernel.h>
+#include <linux/bug.h>
+#include <asm/page.h>
+
+/*
+ * On OpenRISC we use these special fixed_addresses for doing ioremap
+ * early in the boot process before memory initialization is complete.
+ * This is used, in particular, by the early serial console code.
+ *
+ * It's not really 'fixmap', per se, but fits loosely into the same
+ * paradigm.
+ */
+enum fixed_addresses {
+ /*
+ * FIX_IOREMAP entries are useful for mapping physical address
+ * space before ioremap() is useable, e.g. really early in boot
+ * before kmalloc() is working.
+ */
+#define FIX_N_IOREMAPS 32
+ FIX_IOREMAP_BEGIN,
+ FIX_IOREMAP_END = FIX_IOREMAP_BEGIN + FIX_N_IOREMAPS - 1,
+ __end_of_fixed_addresses
+};
+
+#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
+/* FIXADDR_BOTTOM might be a better name here... */
+#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static __always_inline unsigned long fix_to_virt(const unsigned int idx)
+{
+ /*
+ * this branch gets completely eliminated after inlining,
+ * except when someone tries to use fixaddr indices in an
+ * illegal way. (such as mixing up address types or using
+ * out-of-range indices).
+ *
+ * If it doesn't get removed, the linker will complain
+ * loudly with a reasonably clear error message..
+ */
+ if (idx >= __end_of_fixed_addresses)
+ BUG();
+
+ return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+ BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+ return __virt_to_fix(vaddr);
+}
+
+#endif
diff --git a/arch/openrisc/include/asm/futex.h b/arch/openrisc/include/asm/futex.h
new file mode 100644
index 0000000000..865e9cd0d9
--- /dev/null
+++ b/arch/openrisc/include/asm/futex.h
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_OPENRISC_FUTEX_H
+#define __ASM_OPENRISC_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+({ \
+ __asm__ __volatile__ ( \
+ "1: l.lwa %0, %2 \n" \
+ insn "\n" \
+ "2: l.swa %2, %1 \n" \
+ " l.bnf 1b \n" \
+ " l.ori %1, r0, 0 \n" \
+ "3: \n" \
+ ".section .fixup,\"ax\" \n" \
+ "4: l.j 3b \n" \
+ " l.addi %1, r0, %3 \n" \
+ ".previous \n" \
+ ".section __ex_table,\"a\" \n" \
+ ".word 1b,4b,2b,4b \n" \
+ ".previous \n" \
+ : "=&r" (oldval), "=&r" (ret), "+m" (*uaddr) \
+ : "i" (-EFAULT), "r" (oparg) \
+ : "cc", "memory" \
+ ); \
+})
+
+static inline int
+arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr)
+{
+ int oldval = 0, ret;
+
+ if (!access_ok(uaddr, sizeof(u32)))
+ return -EFAULT;
+
+ switch (op) {
+ case FUTEX_OP_SET:
+ __futex_atomic_op("l.or %1,%4,%4", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ADD:
+ __futex_atomic_op("l.add %1,%0,%4", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_OR:
+ __futex_atomic_op("l.or %1,%0,%4", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ __futex_atomic_op("l.and %1,%0,%4", ret, oldval, uaddr, ~oparg);
+ break;
+ case FUTEX_OP_XOR:
+ __futex_atomic_op("l.xor %1,%0,%4", ret, oldval, uaddr, oparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+
+ if (!ret)
+ *oval = oldval;
+
+ return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
+ u32 oldval, u32 newval)
+{
+ int ret = 0;
+ u32 prev;
+
+ if (!access_ok(uaddr, sizeof(u32)))
+ return -EFAULT;
+
+ __asm__ __volatile__ ( \
+ "1: l.lwa %1, %2 \n" \
+ " l.sfeq %1, %3 \n" \
+ " l.bnf 3f \n" \
+ " l.nop \n" \
+ "2: l.swa %2, %4 \n" \
+ " l.bnf 1b \n" \
+ " l.nop \n" \
+ "3: \n" \
+ ".section .fixup,\"ax\" \n" \
+ "4: l.j 3b \n" \
+ " l.addi %0, r0, %5 \n" \
+ ".previous \n" \
+ ".section __ex_table,\"a\" \n" \
+ ".word 1b,4b,2b,4b \n" \
+ ".previous \n" \
+ : "+r" (ret), "=&r" (prev), "+m" (*uaddr) \
+ : "r" (oldval), "r" (newval), "i" (-EFAULT) \
+ : "cc", "memory" \
+ );
+
+ *uval = prev;
+ return ret;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_OPENRISC_FUTEX_H */
diff --git a/arch/openrisc/include/asm/io.h b/arch/openrisc/include/asm/io.h
new file mode 100644
index 0000000000..5a6f0f16a5
--- /dev/null
+++ b/arch/openrisc/include/asm/io.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef __ASM_OPENRISC_IO_H
+#define __ASM_OPENRISC_IO_H
+
+#include <linux/types.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+
+/*
+ * PCI: We do not use IO ports in OpenRISC
+ */
+#define IO_SPACE_LIMIT 0
+
+/* OpenRISC has no port IO */
+#define HAVE_ARCH_PIO_SIZE 1
+#define PIO_RESERVED 0X0UL
+#define PIO_OFFSET 0
+#define PIO_MASK 0
+
+/*
+ * I/O memory mapping functions.
+ */
+#define _PAGE_IOREMAP (pgprot_val(PAGE_KERNEL) | _PAGE_CI)
+
+#include <asm-generic/io.h>
+
+#endif
diff --git a/arch/openrisc/include/asm/irq.h b/arch/openrisc/include/asm/irq.h
new file mode 100644
index 0000000000..fd092a6e86
--- /dev/null
+++ b/arch/openrisc/include/asm/irq.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef __ASM_OPENRISC_IRQ_H__
+#define __ASM_OPENRISC_IRQ_H__
+
+#define NR_IRQS 32
+#include <asm-generic/irq.h>
+
+#define NO_IRQ (-1)
+
+#endif /* __ASM_OPENRISC_IRQ_H__ */
diff --git a/arch/openrisc/include/asm/irqflags.h b/arch/openrisc/include/asm/irqflags.h
new file mode 100644
index 0000000000..d63343b229
--- /dev/null
+++ b/arch/openrisc/include/asm/irqflags.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef ___ASM_OPENRISC_IRQFLAGS_H
+#define ___ASM_OPENRISC_IRQFLAGS_H
+
+#include <asm/spr_defs.h>
+
+#define ARCH_IRQ_DISABLED 0x00
+#define ARCH_IRQ_ENABLED (SPR_SR_IEE|SPR_SR_TEE)
+
+#include <asm-generic/irqflags.h>
+
+#endif /* ___ASM_OPENRISC_IRQFLAGS_H */
diff --git a/arch/openrisc/include/asm/linkage.h b/arch/openrisc/include/asm/linkage.h
new file mode 100644
index 0000000000..25aa449ac3
--- /dev/null
+++ b/arch/openrisc/include/asm/linkage.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef __ASM_OPENRISC_LINKAGE_H
+#define __ASM_OPENRISC_LINKAGE_H
+
+#define __ALIGN .align 0
+#define __ALIGN_STR ".align 0"
+
+#endif /* __ASM_OPENRISC_LINKAGE_H */
diff --git a/arch/openrisc/include/asm/mmu.h b/arch/openrisc/include/asm/mmu.h
new file mode 100644
index 0000000000..eb720110f3
--- /dev/null
+++ b/arch/openrisc/include/asm/mmu.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef __ASM_OPENRISC_MMU_H
+#define __ASM_OPENRISC_MMU_H
+
+#ifndef __ASSEMBLY__
+typedef unsigned long mm_context_t;
+#endif
+
+#endif
diff --git a/arch/openrisc/include/asm/mmu_context.h b/arch/openrisc/include/asm/mmu_context.h
new file mode 100644
index 0000000000..a6702384c7
--- /dev/null
+++ b/arch/openrisc/include/asm/mmu_context.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef __ASM_OPENRISC_MMU_CONTEXT_H
+#define __ASM_OPENRISC_MMU_CONTEXT_H
+
+#include <asm-generic/mm_hooks.h>
+
+#define init_new_context init_new_context
+extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+#define destroy_context destroy_context
+extern void destroy_context(struct mm_struct *mm);
+extern void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk);
+
+#define activate_mm(prev, next) switch_mm((prev), (next), NULL)
+
+/* current active pgd - this is similar to other processors pgd
+ * registers like cr3 on the i386
+ */
+
+extern volatile pgd_t *current_pgd[]; /* defined in arch/openrisc/mm/fault.c */
+
+#include <asm-generic/mmu_context.h>
+
+#endif
diff --git a/arch/openrisc/include/asm/page.h b/arch/openrisc/include/asm/page.h
new file mode 100644
index 0000000000..44fc1fd567
--- /dev/null
+++ b/arch/openrisc/include/asm/page.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef __ASM_OPENRISC_PAGE_H
+#define __ASM_OPENRISC_PAGE_H
+
+
+/* PAGE_SHIFT determines the page size */
+
+#define PAGE_SHIFT 13
+#ifdef __ASSEMBLY__
+#define PAGE_SIZE (1 << PAGE_SHIFT)
+#else
+#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#endif
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+#define PAGE_OFFSET 0xc0000000
+#define KERNELBASE PAGE_OFFSET
+
+/* This is not necessarily the right place for this, but it's needed by
+ * drivers/of/fdt.c
+ */
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+
+#define clear_page(page) memset((page), 0, PAGE_SIZE)
+#define copy_page(to, from) memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg) clear_page(page)
+#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct {
+ unsigned long pte;
+} pte_t;
+typedef struct {
+ unsigned long pgd;
+} pgd_t;
+typedef struct {
+ unsigned long pgprot;
+} pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x) ((x).pte)
+#define pgd_val(x) ((x).pgd)
+#define pgprot_val(x) ((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) })
+#define __pgd(x) ((pgd_t) { (x) })
+#define __pgprot(x) ((pgprot_t) { (x) })
+
+#endif /* !__ASSEMBLY__ */
+
+
+#ifndef __ASSEMBLY__
+
+#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET))
+#define __pa(x) ((unsigned long) (x) - PAGE_OFFSET)
+
+static inline unsigned long virt_to_pfn(const void *kaddr)
+{
+ return __pa(kaddr) >> PAGE_SHIFT;
+}
+
+static inline void * pfn_to_virt(unsigned long pfn)
+{
+ return (void *)((unsigned long)__va(pfn) << PAGE_SHIFT);
+}
+
+#define virt_to_page(addr) \
+ (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
+
+#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+#define virt_addr_valid(kaddr) (pfn_valid(virt_to_pfn(kaddr)))
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/getorder.h>
+
+#endif /* __ASM_OPENRISC_PAGE_H */
diff --git a/arch/openrisc/include/asm/pgalloc.h b/arch/openrisc/include/asm/pgalloc.h
new file mode 100644
index 0000000000..c6a73772a5
--- /dev/null
+++ b/arch/openrisc/include/asm/pgalloc.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef __ASM_OPENRISC_PGALLOC_H
+#define __ASM_OPENRISC_PGALLOC_H
+
+#include <asm/page.h>
+#include <linux/threads.h>
+#include <linux/mm.h>
+#include <linux/memblock.h>
+
+#define __HAVE_ARCH_PTE_ALLOC_ONE_KERNEL
+#include <asm-generic/pgalloc.h>
+
+extern int mem_init_done;
+
+#define pmd_populate_kernel(mm, pmd, pte) \
+ set_pmd(pmd, __pmd(_KERNPG_TABLE + __pa(pte)))
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+ struct page *pte)
+{
+ set_pmd(pmd, __pmd(_KERNPG_TABLE +
+ ((unsigned long)page_to_pfn(pte) <<
+ (unsigned long) PAGE_SHIFT)));
+}
+
+/*
+ * Allocate and free page tables.
+ */
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+ pgd_t *ret = (pgd_t *)__get_free_page(GFP_KERNEL);
+
+ if (ret) {
+ memset(ret, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
+ memcpy(ret + USER_PTRS_PER_PGD,
+ swapper_pg_dir + USER_PTRS_PER_PGD,
+ (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+
+ }
+ return ret;
+}
+
+#if 0
+/* FIXME: This seems to be the preferred style, but we are using
+ * current_pgd (from mm->pgd) to load kernel pages so we need it
+ * initialized. This needs to be looked into.
+ */
+extern inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+ return (pgd_t *)get_zeroed_page(GFP_KERNEL);
+}
+#endif
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm);
+
+#define __pte_free_tlb(tlb, pte, addr) \
+do { \
+ pagetable_pte_dtor(page_ptdesc(pte)); \
+ tlb_remove_page_ptdesc((tlb), (page_ptdesc(pte))); \
+} while (0)
+
+#endif
diff --git a/arch/openrisc/include/asm/pgtable.h b/arch/openrisc/include/asm/pgtable.h
new file mode 100644
index 0000000000..60c6ce7ff2
--- /dev/null
+++ b/arch/openrisc/include/asm/pgtable.h
@@ -0,0 +1,436 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+/* or1k pgtable.h - macros and functions to manipulate page tables
+ *
+ * Based on:
+ * include/asm-cris/pgtable.h
+ */
+
+#ifndef __ASM_OPENRISC_PGTABLE_H
+#define __ASM_OPENRISC_PGTABLE_H
+
+#include <asm-generic/pgtable-nopmd.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/mmu.h>
+#include <asm/fixmap.h>
+
+/*
+ * The Linux memory management assumes a three-level page table setup. On
+ * or1k, we use that, but "fold" the mid level into the top-level page
+ * table. Since the MMU TLB is software loaded through an interrupt, it
+ * supports any page table structure, so we could have used a three-level
+ * setup, but for the amounts of memory we normally use, a two-level is
+ * probably more efficient.
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the or1k page table tree.
+ */
+
+extern void paging_init(void);
+
+/* Certain architectures need to do special things when pte's
+ * within a page table are directly modified. Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval) ((*(pteptr)) = (pteval))
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+#define PGDIR_SHIFT (PAGE_SHIFT + (PAGE_SHIFT-2))
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: we use a two-level, so
+ * we don't really have any PMD directory physically.
+ * pointers are 4 bytes so we can use the page size and
+ * divide it by 4 (shift by 2).
+ */
+#define PTRS_PER_PTE (1UL << (PAGE_SHIFT-2))
+
+#define PTRS_PER_PGD (1UL << (32-PGDIR_SHIFT))
+
+/* calculate how many PGD entries a user-level program can use
+ * the first mappable virtual address is 0
+ * (TASK_SIZE is the maximum virtual address space)
+ */
+
+#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE)
+
+/*
+ * Kernels own virtual memory area.
+ */
+
+/*
+ * The size and location of the vmalloc area are chosen so that modules
+ * placed in this area aren't more than a 28-bit signed offset from any
+ * kernel functions that they may need. This greatly simplifies handling
+ * of the relocations for l.j and l.jal instructions as we don't need to
+ * introduce any trampolines for reaching "distant" code.
+ *
+ * 64 MB of vmalloc area is comparable to what's available on other arches.
+ */
+
+#define VMALLOC_START (PAGE_OFFSET-0x04000000UL)
+#define VMALLOC_END (PAGE_OFFSET)
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+
+/* Define some higher level generic page attributes.
+ *
+ * If you change _PAGE_CI definition be sure to change it in
+ * io.h for ioremap() too.
+ */
+
+/*
+ * An OR32 PTE looks like this:
+ *
+ * | 31 ... 10 | 9 | 8 ... 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+ * Phys pg.num L PP Index D A WOM WBC CI CC
+ *
+ * L : link
+ * PPI: Page protection index
+ * D : Dirty
+ * A : Accessed
+ * WOM: Weakly ordered memory
+ * WBC: Write-back cache
+ * CI : Cache inhibit
+ * CC : Cache coherent
+ *
+ * The protection bits below should correspond to the layout of the actual
+ * PTE as per above
+ */
+
+#define _PAGE_CC 0x001 /* software: pte contains a translation */
+#define _PAGE_CI 0x002 /* cache inhibit */
+#define _PAGE_WBC 0x004 /* write back cache */
+#define _PAGE_WOM 0x008 /* weakly ordered memory */
+
+#define _PAGE_A 0x010 /* accessed */
+#define _PAGE_D 0x020 /* dirty */
+#define _PAGE_URE 0x040 /* user read enable */
+#define _PAGE_UWE 0x080 /* user write enable */
+
+#define _PAGE_SRE 0x100 /* superuser read enable */
+#define _PAGE_SWE 0x200 /* superuser write enable */
+#define _PAGE_EXEC 0x400 /* software: page is executable */
+#define _PAGE_U_SHARED 0x800 /* software: page is shared in user space */
+
+/* 0x001 is cache coherency bit, which should always be set to
+ * 1 - for SMP (when we support it)
+ * 0 - otherwise
+ *
+ * we just reuse this bit in software for _PAGE_PRESENT and
+ * force it to 0 when loading it into TLB.
+ */
+#define _PAGE_PRESENT _PAGE_CC
+#define _PAGE_USER _PAGE_URE
+#define _PAGE_WRITE (_PAGE_UWE | _PAGE_SWE)
+#define _PAGE_DIRTY _PAGE_D
+#define _PAGE_ACCESSED _PAGE_A
+#define _PAGE_NO_CACHE _PAGE_CI
+#define _PAGE_SHARED _PAGE_U_SHARED
+#define _PAGE_READ (_PAGE_URE | _PAGE_SRE)
+
+#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED)
+#define _PAGE_ALL (_PAGE_PRESENT | _PAGE_ACCESSED)
+#define _KERNPG_TABLE \
+ (_PAGE_BASE | _PAGE_SRE | _PAGE_SWE | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+/* We borrow bit 11 to store the exclusive marker in swap PTEs. */
+#define _PAGE_SWP_EXCLUSIVE _PAGE_U_SHARED
+
+#define PAGE_NONE __pgprot(_PAGE_ALL)
+#define PAGE_READONLY __pgprot(_PAGE_ALL | _PAGE_URE | _PAGE_SRE)
+#define PAGE_READONLY_X __pgprot(_PAGE_ALL | _PAGE_URE | _PAGE_SRE | _PAGE_EXEC)
+#define PAGE_SHARED \
+ __pgprot(_PAGE_ALL | _PAGE_URE | _PAGE_SRE | _PAGE_UWE | _PAGE_SWE \
+ | _PAGE_SHARED)
+#define PAGE_SHARED_X \
+ __pgprot(_PAGE_ALL | _PAGE_URE | _PAGE_SRE | _PAGE_UWE | _PAGE_SWE \
+ | _PAGE_SHARED | _PAGE_EXEC)
+#define PAGE_COPY __pgprot(_PAGE_ALL | _PAGE_URE | _PAGE_SRE)
+#define PAGE_COPY_X __pgprot(_PAGE_ALL | _PAGE_URE | _PAGE_SRE | _PAGE_EXEC)
+
+#define PAGE_KERNEL \
+ __pgprot(_PAGE_ALL | _PAGE_SRE | _PAGE_SWE \
+ | _PAGE_SHARED | _PAGE_DIRTY | _PAGE_EXEC)
+#define PAGE_KERNEL_RO \
+ __pgprot(_PAGE_ALL | _PAGE_SRE \
+ | _PAGE_SHARED | _PAGE_DIRTY | _PAGE_EXEC)
+#define PAGE_KERNEL_NOCACHE \
+ __pgprot(_PAGE_ALL | _PAGE_SRE | _PAGE_SWE \
+ | _PAGE_SHARED | _PAGE_DIRTY | _PAGE_EXEC | _PAGE_CI)
+
+/* zero page used for uninitialized stuff */
+extern unsigned long empty_zero_page[2048];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+/* number of bits that fit into a memory pointer */
+#define BITS_PER_PTR (8*sizeof(unsigned long))
+
+/* to align the pointer to a pointer address */
+#define PTR_MASK (~(sizeof(void *)-1))
+
+/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */
+/* 64-bit machines, beware! SRB. */
+#define SIZEOF_PTR_LOG2 2
+
+/* to find an entry in a page-table */
+#define PAGE_PTR(address) \
+((unsigned long)(address)>>(PAGE_SHIFT-SIZEOF_PTR_LOG2)&PTR_MASK&~PAGE_MASK)
+
+/* to set the page-dir */
+#define SET_PAGE_DIR(tsk, pgdir)
+
+#define pte_none(x) (!pte_val(x))
+#define pte_present(x) (pte_val(x) & _PAGE_PRESENT)
+#define pte_clear(mm, addr, xp) do { pte_val(*(xp)) = 0; } while (0)
+
+#define pmd_none(x) (!pmd_val(x))
+#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK)) != _KERNPG_TABLE)
+#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT)
+#define pmd_clear(xp) do { pmd_val(*(xp)) = 0; } while (0)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+
+static inline int pte_read(pte_t pte) { return pte_val(pte) & _PAGE_READ; }
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; }
+static inline int pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_EXEC; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+ pte_val(pte) &= ~(_PAGE_WRITE);
+ return pte;
+}
+
+static inline pte_t pte_rdprotect(pte_t pte)
+{
+ pte_val(pte) &= ~(_PAGE_READ);
+ return pte;
+}
+
+static inline pte_t pte_exprotect(pte_t pte)
+{
+ pte_val(pte) &= ~(_PAGE_EXEC);
+ return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+ pte_val(pte) &= ~(_PAGE_DIRTY);
+ return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+ pte_val(pte) &= ~(_PAGE_ACCESSED);
+ return pte;
+}
+
+static inline pte_t pte_mkwrite_novma(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_WRITE;
+ return pte;
+}
+
+static inline pte_t pte_mkread(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_READ;
+ return pte;
+}
+
+static inline pte_t pte_mkexec(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_EXEC;
+ return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_DIRTY;
+ return pte;
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_ACCESSED;
+ return pte;
+}
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+/* What actually goes as arguments to the various functions is less than
+ * obvious, but a rule of thumb is that struct page's goes as struct page *,
+ * really physical DRAM addresses are unsigned long's, and DRAM "virtual"
+ * addresses (the 0xc0xxxxxx's) goes as void *'s.
+ */
+
+static inline pte_t __mk_pte(void *page, pgprot_t pgprot)
+{
+ pte_t pte;
+ /* the PTE needs a physical address */
+ pte_val(pte) = __pa(page) | pgprot_val(pgprot);
+ return pte;
+}
+
+#define mk_pte(page, pgprot) __mk_pte(page_address(page), (pgprot))
+
+#define mk_pte_phys(physpage, pgprot) \
+({ \
+ pte_t __pte; \
+ \
+ pte_val(__pte) = (physpage) + pgprot_val(pgprot); \
+ __pte; \
+})
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+ return pte;
+}
+
+
+/*
+ * pte_val refers to a page in the 0x0xxxxxxx physical DRAM interval
+ * __pte_page(pte_val) refers to the "virtual" DRAM interval
+ * pte_pagenr refers to the page-number counted starting from the virtual
+ * DRAM start
+ */
+
+static inline unsigned long __pte_page(pte_t pte)
+{
+ /* the PTE contains a physical address */
+ return (unsigned long)__va(pte_val(pte) & PAGE_MASK);
+}
+
+#define pte_pagenr(pte) ((__pte_page(pte) - PAGE_OFFSET) >> PAGE_SHIFT)
+
+/* permanent address of a page */
+
+#define __page_address(page) (PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT))
+#define pte_page(pte) (mem_map+pte_pagenr(pte))
+
+/*
+ * only the pte's themselves need to point to physical DRAM (see above)
+ * the pagetable links are purely handled within the kernel SW and thus
+ * don't need the __pa and __va transformations.
+ */
+static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
+{
+ pmd_val(*pmdp) = _KERNPG_TABLE | (unsigned long) ptep;
+}
+
+#define pmd_pfn(pmd) (pmd_val(pmd) >> PAGE_SHIFT)
+#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+
+static inline unsigned long pmd_page_vaddr(pmd_t pmd)
+{
+ return ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK));
+}
+
+#define __pmd_offset(address) \
+ (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
+#define PFN_PTE_SHIFT PAGE_SHIFT
+#define pte_pfn(x) ((unsigned long)(((x).pte)) >> PAGE_SHIFT)
+#define pfn_pte(pfn, prot) __pte((((pfn) << PAGE_SHIFT)) | pgprot_val(prot))
+
+#define pte_ERROR(e) \
+ printk(KERN_ERR "%s:%d: bad pte %p(%08lx).\n", \
+ __FILE__, __LINE__, &(e), pte_val(e))
+#define pgd_ERROR(e) \
+ printk(KERN_ERR "%s:%d: bad pgd %p(%08lx).\n", \
+ __FILE__, __LINE__, &(e), pgd_val(e))
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; /* defined in head.S */
+
+struct vm_area_struct;
+
+static inline void update_tlb(struct vm_area_struct *vma,
+ unsigned long address, pte_t *pte)
+{
+}
+
+extern void update_cache(struct vm_area_struct *vma,
+ unsigned long address, pte_t *pte);
+
+static inline void update_mmu_cache_range(struct vm_fault *vmf,
+ struct vm_area_struct *vma, unsigned long address,
+ pte_t *ptep, unsigned int nr)
+{
+ update_tlb(vma, address, ptep);
+ update_cache(vma, address, ptep);
+}
+
+#define update_mmu_cache(vma, addr, ptep) \
+ update_mmu_cache_range(NULL, vma, addr, ptep, 1)
+
+/* __PHX__ FIXME, SWAP, this probably doesn't work */
+
+/*
+ * Encode/decode swap entries and swap PTEs. Swap PTEs are all PTEs that
+ * are !pte_none() && !pte_present().
+ *
+ * Format of swap PTEs:
+ *
+ * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * <-------------- offset ---------------> E <- type --> 0 0 0 0 0
+ *
+ * E is the exclusive marker that is not stored in swap entries.
+ * The zero'ed bits include _PAGE_PRESENT.
+ */
+#define __swp_type(x) (((x).val >> 5) & 0x3f)
+#define __swp_offset(x) ((x).val >> 12)
+#define __swp_entry(type, offset) \
+ ((swp_entry_t) { (((type) & 0x3f) << 5) | ((offset) << 12) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+
+static inline int pte_swp_exclusive(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
+}
+
+static inline pte_t pte_swp_mkexclusive(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_SWP_EXCLUSIVE;
+ return pte;
+}
+
+static inline pte_t pte_swp_clear_exclusive(pte_t pte)
+{
+ pte_val(pte) &= ~_PAGE_SWP_EXCLUSIVE;
+ return pte;
+}
+
+typedef pte_t *pte_addr_t;
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_OPENRISC_PGTABLE_H */
diff --git a/arch/openrisc/include/asm/processor.h b/arch/openrisc/include/asm/processor.h
new file mode 100644
index 0000000000..3b736e74e6
--- /dev/null
+++ b/arch/openrisc/include/asm/processor.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef __ASM_OPENRISC_PROCESSOR_H
+#define __ASM_OPENRISC_PROCESSOR_H
+
+#include <asm/spr_defs.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
+/* Kernel and user SR register setting */
+#define KERNEL_SR (SPR_SR_DME | SPR_SR_IME | SPR_SR_ICE \
+ | SPR_SR_DCE | SPR_SR_SM)
+#define USER_SR (SPR_SR_DME | SPR_SR_IME | SPR_SR_ICE \
+ | SPR_SR_DCE | SPR_SR_IEE | SPR_SR_TEE)
+
+/*
+ * User space process size. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+
+#define TASK_SIZE (0x80000000UL)
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE (TASK_SIZE / 8 * 3)
+
+#ifndef __ASSEMBLY__
+
+struct task_struct;
+
+struct thread_struct {
+};
+
+/*
+ * At user->kernel entry, the pt_regs struct is stacked on the top of the
+ * kernel-stack. This macro allows us to find those regs for a task.
+ * Notice that subsequent pt_regs stackings, like recursive interrupts
+ * occurring while we're in the kernel, won't affect this - only the first
+ * user->kernel transition registers are reached by this (i.e. not regs
+ * for running signal handler)
+ */
+#define user_regs(thread_info) (((struct pt_regs *)((unsigned long)(thread_info) + THREAD_SIZE - STACK_FRAME_OVERHEAD)) - 1)
+
+/*
+ * Dito but for the currently running task
+ */
+
+#define task_pt_regs(task) user_regs(task_thread_info(task))
+
+#define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack)
+
+#define INIT_THREAD { }
+
+
+#define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc)
+#define KSTK_ESP(tsk) (task_pt_regs(tsk)->sp)
+
+
+void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp);
+unsigned long __get_wchan(struct task_struct *p);
+void show_registers(struct pt_regs *regs);
+
+#define cpu_relax() barrier()
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_OPENRISC_PROCESSOR_H */
diff --git a/arch/openrisc/include/asm/ptrace.h b/arch/openrisc/include/asm/ptrace.h
new file mode 100644
index 0000000000..375147ff71
--- /dev/null
+++ b/arch/openrisc/include/asm/ptrace.h
@@ -0,0 +1,120 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+#ifndef __ASM_OPENRISC_PTRACE_H
+#define __ASM_OPENRISC_PTRACE_H
+
+
+#include <asm/spr_defs.h>
+#include <uapi/asm/ptrace.h>
+
+/*
+ * Make kernel PTrace/register structures opaque to userspace... userspace can
+ * access thread state via the regset mechanism. This allows us a bit of
+ * flexibility in how we order the registers on the stack, permitting some
+ * optimizations like packing call-clobbered registers together so that
+ * they share a cacheline (not done yet, though... future optimization).
+ */
+
+#ifndef __ASSEMBLY__
+/*
+ * This struct describes how the registers are laid out on the kernel stack
+ * during a syscall or other kernel entry.
+ *
+ * This structure should always be cacheline aligned on the stack.
+ * FIXME: I don't think that's the case right now. The alignment is
+ * taken care of elsewhere... head.S, process.c, etc.
+ */
+
+struct pt_regs {
+ union {
+ struct {
+ /* Named registers */
+ long sr; /* Stored in place of r0 */
+ long sp; /* r1 */
+ };
+ struct {
+ /* Old style */
+ long offset[2];
+ long gprs[30];
+ };
+ struct {
+ /* New style */
+ long gpr[32];
+ };
+ };
+ long pc;
+ /* For restarting system calls:
+ * Set to syscall number for syscall exceptions,
+ * -1 for all other exceptions.
+ */
+ long orig_gpr11; /* For restarting system calls */
+ long fpcsr; /* Floating point control status register. */
+ long dummy2; /* Cheap alignment fix */
+};
+
+/* TODO: Rename this to REDZONE because that's what it is */
+#define STACK_FRAME_OVERHEAD 128 /* size of minimum stack frame */
+
+#define instruction_pointer(regs) ((regs)->pc)
+#define user_mode(regs) (((regs)->sr & SPR_SR_SM) == 0)
+#define user_stack_pointer(regs) ((unsigned long)(regs)->sp)
+#define profile_pc(regs) instruction_pointer(regs)
+
+static inline long regs_return_value(struct pt_regs *regs)
+{
+ return regs->gpr[11];
+}
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Offsets used by 'ptrace' system call interface.
+ */
+#define PT_SR 0
+#define PT_SP 4
+#define PT_GPR2 8
+#define PT_GPR3 12
+#define PT_GPR4 16
+#define PT_GPR5 20
+#define PT_GPR6 24
+#define PT_GPR7 28
+#define PT_GPR8 32
+#define PT_GPR9 36
+#define PT_GPR10 40
+#define PT_GPR11 44
+#define PT_GPR12 48
+#define PT_GPR13 52
+#define PT_GPR14 56
+#define PT_GPR15 60
+#define PT_GPR16 64
+#define PT_GPR17 68
+#define PT_GPR18 72
+#define PT_GPR19 76
+#define PT_GPR20 80
+#define PT_GPR21 84
+#define PT_GPR22 88
+#define PT_GPR23 92
+#define PT_GPR24 96
+#define PT_GPR25 100
+#define PT_GPR26 104
+#define PT_GPR27 108
+#define PT_GPR28 112
+#define PT_GPR29 116
+#define PT_GPR30 120
+#define PT_GPR31 124
+#define PT_PC 128
+#define PT_ORIG_GPR11 132
+#define PT_FPCSR 136
+
+#endif /* __ASM_OPENRISC_PTRACE_H */
diff --git a/arch/openrisc/include/asm/serial.h b/arch/openrisc/include/asm/serial.h
new file mode 100644
index 0000000000..a9f23af336
--- /dev/null
+++ b/arch/openrisc/include/asm/serial.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef __ASM_OPENRISC_SERIAL_H
+#define __ASM_OPENRISC_SERIAL_H
+
+#ifdef __KERNEL__
+
+#include <asm/cpuinfo.h>
+
+/* There's a generic version of this file, but it assumes a 1.8MHz UART clk...
+ * this, on the other hand, assumes the UART clock is tied to the system
+ * clock... 8250_early.c (early 8250 serial console) actually uses this, so
+ * it needs to be correct to get the early console working.
+ */
+
+#define BASE_BAUD (cpuinfo_or1k[smp_processor_id()].clock_frequency/16)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_OPENRISC_SERIAL_H */
diff --git a/arch/openrisc/include/asm/setup.h b/arch/openrisc/include/asm/setup.h
new file mode 100644
index 0000000000..9acbc5deda
--- /dev/null
+++ b/arch/openrisc/include/asm/setup.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2021 Stafford Horne
+ */
+#ifndef _ASM_OR1K_SETUP_H
+#define _ASM_OR1K_SETUP_H
+
+#include <linux/init.h>
+#include <asm-generic/setup.h>
+
+#ifndef __ASSEMBLY__
+void __init or1k_early_setup(void *fdt);
+#endif
+
+#endif /* _ASM_OR1K_SETUP_H */
diff --git a/arch/openrisc/include/asm/smp.h b/arch/openrisc/include/asm/smp.h
new file mode 100644
index 0000000000..e21d2f12b5
--- /dev/null
+++ b/arch/openrisc/include/asm/smp.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2014 Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_OPENRISC_SMP_H
+#define __ASM_OPENRISC_SMP_H
+
+#include <asm/spr.h>
+#include <asm/spr_defs.h>
+
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+#define hard_smp_processor_id() mfspr(SPR_COREID)
+
+extern void smp_init_cpus(void);
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+
+extern void set_smp_cross_call(void (*)(const struct cpumask *, unsigned int));
+extern void handle_IPI(unsigned int ipi_msg);
+
+#endif /* __ASM_OPENRISC_SMP_H */
diff --git a/arch/openrisc/include/asm/spr.h b/arch/openrisc/include/asm/spr.h
new file mode 100644
index 0000000000..63cf7bdcf0
--- /dev/null
+++ b/arch/openrisc/include/asm/spr.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#ifndef __ASM_OPENRISC_SPR_H
+#define __ASM_OPENRISC_SPR_H
+
+#define mtspr(_spr, _val) __asm__ __volatile__ ( \
+ "l.mtspr r0,%1,%0" \
+ : : "K" (_spr), "r" (_val))
+#define mtspr_off(_spr, _off, _val) __asm__ __volatile__ ( \
+ "l.mtspr %0,%1,%2" \
+ : : "r" (_off), "r" (_val), "K" (_spr))
+
+static inline unsigned long mfspr(unsigned long add)
+{
+ unsigned long ret;
+ __asm__ __volatile__ ("l.mfspr %0,r0,%1" : "=r" (ret) : "K" (add));
+ return ret;
+}
+
+static inline unsigned long mfspr_off(unsigned long add, unsigned long offset)
+{
+ unsigned long ret;
+ __asm__ __volatile__ ("l.mfspr %0,%1,%2" : "=r" (ret)
+ : "r" (offset), "K" (add));
+ return ret;
+}
+
+#endif
diff --git a/arch/openrisc/include/asm/spr_defs.h b/arch/openrisc/include/asm/spr_defs.h
new file mode 100644
index 0000000000..f0b6b492e9
--- /dev/null
+++ b/arch/openrisc/include/asm/spr_defs.h
@@ -0,0 +1,614 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * SPR Definitions
+ *
+ * Copyright (C) 2000 Damjan Lampret
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2008, 2010 Embecosm Limited
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This file is part of OpenRISC 1000 Architectural Simulator.
+ */
+
+#ifndef SPR_DEFS__H
+#define SPR_DEFS__H
+
+/* Definition of special-purpose registers (SPRs). */
+
+#define MAX_GRPS (32)
+#define MAX_SPRS_PER_GRP_BITS (11)
+#define MAX_SPRS_PER_GRP (1 << MAX_SPRS_PER_GRP_BITS)
+#define MAX_SPRS (0x10000)
+
+/* Base addresses for the groups */
+#define SPRGROUP_SYS (0 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_DMMU (1 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_IMMU (2 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_DC (3 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_IC (4 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_MAC (5 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_D (6 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_PC (7 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_PM (8 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_PIC (9 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_TT (10 << MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_FP (11 << MAX_SPRS_PER_GRP_BITS)
+
+/* System control and status group */
+#define SPR_VR (SPRGROUP_SYS + 0)
+#define SPR_UPR (SPRGROUP_SYS + 1)
+#define SPR_CPUCFGR (SPRGROUP_SYS + 2)
+#define SPR_DMMUCFGR (SPRGROUP_SYS + 3)
+#define SPR_IMMUCFGR (SPRGROUP_SYS + 4)
+#define SPR_DCCFGR (SPRGROUP_SYS + 5)
+#define SPR_ICCFGR (SPRGROUP_SYS + 6)
+#define SPR_DCFGR (SPRGROUP_SYS + 7)
+#define SPR_PCCFGR (SPRGROUP_SYS + 8)
+#define SPR_VR2 (SPRGROUP_SYS + 9)
+#define SPR_AVR (SPRGROUP_SYS + 10)
+#define SPR_EVBAR (SPRGROUP_SYS + 11)
+#define SPR_AECR (SPRGROUP_SYS + 12)
+#define SPR_AESR (SPRGROUP_SYS + 13)
+#define SPR_NPC (SPRGROUP_SYS + 16) /* CZ 21/06/01 */
+#define SPR_SR (SPRGROUP_SYS + 17) /* CZ 21/06/01 */
+#define SPR_PPC (SPRGROUP_SYS + 18) /* CZ 21/06/01 */
+#define SPR_FPCSR (SPRGROUP_SYS + 20) /* CZ 21/06/01 */
+#define SPR_EPCR_BASE (SPRGROUP_SYS + 32) /* CZ 21/06/01 */
+#define SPR_EPCR_LAST (SPRGROUP_SYS + 47) /* CZ 21/06/01 */
+#define SPR_EEAR_BASE (SPRGROUP_SYS + 48)
+#define SPR_EEAR_LAST (SPRGROUP_SYS + 63)
+#define SPR_ESR_BASE (SPRGROUP_SYS + 64)
+#define SPR_ESR_LAST (SPRGROUP_SYS + 79)
+#define SPR_COREID (SPRGROUP_SYS + 128)
+#define SPR_NUMCORES (SPRGROUP_SYS + 129)
+#define SPR_GPR_BASE (SPRGROUP_SYS + 1024)
+
+/* Data MMU group */
+#define SPR_DMMUCR (SPRGROUP_DMMU + 0)
+#define SPR_DTLBEIR (SPRGROUP_DMMU + 2)
+#define SPR_DTLBMR_BASE(WAY) (SPRGROUP_DMMU + 0x200 + (WAY) * 0x100)
+#define SPR_DTLBMR_LAST(WAY) (SPRGROUP_DMMU + 0x27f + (WAY) * 0x100)
+#define SPR_DTLBTR_BASE(WAY) (SPRGROUP_DMMU + 0x280 + (WAY) * 0x100)
+#define SPR_DTLBTR_LAST(WAY) (SPRGROUP_DMMU + 0x2ff + (WAY) * 0x100)
+
+/* Instruction MMU group */
+#define SPR_IMMUCR (SPRGROUP_IMMU + 0)
+#define SPR_ITLBEIR (SPRGROUP_IMMU + 2)
+#define SPR_ITLBMR_BASE(WAY) (SPRGROUP_IMMU + 0x200 + (WAY) * 0x100)
+#define SPR_ITLBMR_LAST(WAY) (SPRGROUP_IMMU + 0x27f + (WAY) * 0x100)
+#define SPR_ITLBTR_BASE(WAY) (SPRGROUP_IMMU + 0x280 + (WAY) * 0x100)
+#define SPR_ITLBTR_LAST(WAY) (SPRGROUP_IMMU + 0x2ff + (WAY) * 0x100)
+
+/* Data cache group */
+#define SPR_DCCR (SPRGROUP_DC + 0)
+#define SPR_DCBPR (SPRGROUP_DC + 1)
+#define SPR_DCBFR (SPRGROUP_DC + 2)
+#define SPR_DCBIR (SPRGROUP_DC + 3)
+#define SPR_DCBWR (SPRGROUP_DC + 4)
+#define SPR_DCBLR (SPRGROUP_DC + 5)
+#define SPR_DCR_BASE(WAY) (SPRGROUP_DC + 0x200 + (WAY) * 0x200)
+#define SPR_DCR_LAST(WAY) (SPRGROUP_DC + 0x3ff + (WAY) * 0x200)
+
+/* Instruction cache group */
+#define SPR_ICCR (SPRGROUP_IC + 0)
+#define SPR_ICBPR (SPRGROUP_IC + 1)
+#define SPR_ICBIR (SPRGROUP_IC + 2)
+#define SPR_ICBLR (SPRGROUP_IC + 3)
+#define SPR_ICR_BASE(WAY) (SPRGROUP_IC + 0x200 + (WAY) * 0x200)
+#define SPR_ICR_LAST(WAY) (SPRGROUP_IC + 0x3ff + (WAY) * 0x200)
+
+/* MAC group */
+#define SPR_MACLO (SPRGROUP_MAC + 1)
+#define SPR_MACHI (SPRGROUP_MAC + 2)
+
+/* Debug group */
+#define SPR_DVR(N) (SPRGROUP_D + (N))
+#define SPR_DCR(N) (SPRGROUP_D + 8 + (N))
+#define SPR_DMR1 (SPRGROUP_D + 16)
+#define SPR_DMR2 (SPRGROUP_D + 17)
+#define SPR_DWCR0 (SPRGROUP_D + 18)
+#define SPR_DWCR1 (SPRGROUP_D + 19)
+#define SPR_DSR (SPRGROUP_D + 20)
+#define SPR_DRR (SPRGROUP_D + 21)
+
+/* Performance counters group */
+#define SPR_PCCR(N) (SPRGROUP_PC + (N))
+#define SPR_PCMR(N) (SPRGROUP_PC + 8 + (N))
+
+/* Power management group */
+#define SPR_PMR (SPRGROUP_PM + 0)
+
+/* PIC group */
+#define SPR_PICMR (SPRGROUP_PIC + 0)
+#define SPR_PICPR (SPRGROUP_PIC + 1)
+#define SPR_PICSR (SPRGROUP_PIC + 2)
+
+/* Tick Timer group */
+#define SPR_TTMR (SPRGROUP_TT + 0)
+#define SPR_TTCR (SPRGROUP_TT + 1)
+
+/*
+ * Bit definitions for the Version Register
+ *
+ */
+#define SPR_VR_VER 0xff000000 /* Processor version */
+#define SPR_VR_CFG 0x00ff0000 /* Processor configuration */
+#define SPR_VR_RES 0x0000ffc0 /* Reserved */
+#define SPR_VR_REV 0x0000003f /* Processor revision */
+#define SPR_VR_UVRP 0x00000040 /* Updated Version Registers Present */
+
+#define SPR_VR_VER_OFF 24
+#define SPR_VR_CFG_OFF 16
+#define SPR_VR_REV_OFF 0
+
+/*
+ * Bit definitions for the Version Register 2
+ */
+#define SPR_VR2_CPUID 0xff000000 /* Processor ID */
+#define SPR_VR2_VER 0x00ffffff /* Processor version */
+
+/*
+ * Bit definitions for the Unit Present Register
+ *
+ */
+#define SPR_UPR_UP 0x00000001 /* UPR present */
+#define SPR_UPR_DCP 0x00000002 /* Data cache present */
+#define SPR_UPR_ICP 0x00000004 /* Instruction cache present */
+#define SPR_UPR_DMP 0x00000008 /* Data MMU present */
+#define SPR_UPR_IMP 0x00000010 /* Instruction MMU present */
+#define SPR_UPR_MP 0x00000020 /* MAC present */
+#define SPR_UPR_DUP 0x00000040 /* Debug unit present */
+#define SPR_UPR_PCUP 0x00000080 /* Performance counters unit present */
+#define SPR_UPR_PICP 0x00000100 /* PIC present */
+#define SPR_UPR_PMP 0x00000200 /* Power management present */
+#define SPR_UPR_TTP 0x00000400 /* Tick timer present */
+#define SPR_UPR_RES 0x00fe0000 /* Reserved */
+#define SPR_UPR_CUP 0xff000000 /* Context units present */
+
+/*
+ * JPB: Bit definitions for the CPU configuration register
+ *
+ */
+#define SPR_CPUCFGR_NSGF 0x0000000f /* Number of shadow GPR files */
+#define SPR_CPUCFGR_CGF 0x00000010 /* Custom GPR file */
+#define SPR_CPUCFGR_OB32S 0x00000020 /* ORBIS32 supported */
+#define SPR_CPUCFGR_OB64S 0x00000040 /* ORBIS64 supported */
+#define SPR_CPUCFGR_OF32S 0x00000080 /* ORFPX32 supported */
+#define SPR_CPUCFGR_OF64S 0x00000100 /* ORFPX64 supported */
+#define SPR_CPUCFGR_OV64S 0x00000200 /* ORVDX64 supported */
+#define SPR_CPUCFGR_RES 0xfffffc00 /* Reserved */
+
+/*
+ * JPB: Bit definitions for the Debug configuration register and other
+ * constants.
+ *
+ */
+
+#define SPR_DCFGR_NDP 0x00000007 /* Number of matchpoints mask */
+#define SPR_DCFGR_NDP1 0x00000000 /* One matchpoint supported */
+#define SPR_DCFGR_NDP2 0x00000001 /* Two matchpoints supported */
+#define SPR_DCFGR_NDP3 0x00000002 /* Three matchpoints supported */
+#define SPR_DCFGR_NDP4 0x00000003 /* Four matchpoints supported */
+#define SPR_DCFGR_NDP5 0x00000004 /* Five matchpoints supported */
+#define SPR_DCFGR_NDP6 0x00000005 /* Six matchpoints supported */
+#define SPR_DCFGR_NDP7 0x00000006 /* Seven matchpoints supported */
+#define SPR_DCFGR_NDP8 0x00000007 /* Eight matchpoints supported */
+#define SPR_DCFGR_WPCI 0x00000008 /* Watchpoint counters implemented */
+
+#define MATCHPOINTS_TO_NDP(n) (1 == n ? SPR_DCFGR_NDP1 : \
+ 2 == n ? SPR_DCFGR_NDP2 : \
+ 3 == n ? SPR_DCFGR_NDP3 : \
+ 4 == n ? SPR_DCFGR_NDP4 : \
+ 5 == n ? SPR_DCFGR_NDP5 : \
+ 6 == n ? SPR_DCFGR_NDP6 : \
+ 7 == n ? SPR_DCFGR_NDP7 : SPR_DCFGR_NDP8)
+#define MAX_MATCHPOINTS 8
+#define MAX_WATCHPOINTS (MAX_MATCHPOINTS + 2)
+
+/*
+ * Bit definitions for the Supervision Register
+ *
+ */
+#define SPR_SR_SM 0x00000001 /* Supervisor Mode */
+#define SPR_SR_TEE 0x00000002 /* Tick timer Exception Enable */
+#define SPR_SR_IEE 0x00000004 /* Interrupt Exception Enable */
+#define SPR_SR_DCE 0x00000008 /* Data Cache Enable */
+#define SPR_SR_ICE 0x00000010 /* Instruction Cache Enable */
+#define SPR_SR_DME 0x00000020 /* Data MMU Enable */
+#define SPR_SR_IME 0x00000040 /* Instruction MMU Enable */
+#define SPR_SR_LEE 0x00000080 /* Little Endian Enable */
+#define SPR_SR_CE 0x00000100 /* CID Enable */
+#define SPR_SR_F 0x00000200 /* Condition Flag */
+#define SPR_SR_CY 0x00000400 /* Carry flag */
+#define SPR_SR_OV 0x00000800 /* Overflow flag */
+#define SPR_SR_OVE 0x00001000 /* Overflow flag Exception */
+#define SPR_SR_DSX 0x00002000 /* Delay Slot Exception */
+#define SPR_SR_EPH 0x00004000 /* Exception Prefix High */
+#define SPR_SR_FO 0x00008000 /* Fixed one */
+#define SPR_SR_SUMRA 0x00010000 /* Supervisor SPR read access */
+#define SPR_SR_RES 0x0ffe0000 /* Reserved */
+#define SPR_SR_CID 0xf0000000 /* Context ID */
+
+/*
+ * Bit definitions for the Data MMU Control Register
+ *
+ */
+#define SPR_DMMUCR_P2S 0x0000003e /* Level 2 Page Size */
+#define SPR_DMMUCR_P1S 0x000007c0 /* Level 1 Page Size */
+#define SPR_DMMUCR_VADDR_WIDTH 0x0000f800 /* Virtual ADDR Width */
+#define SPR_DMMUCR_PADDR_WIDTH 0x000f0000 /* Physical ADDR Width */
+
+/*
+ * Bit definitions for the Instruction MMU Control Register
+ *
+ */
+#define SPR_IMMUCR_P2S 0x0000003e /* Level 2 Page Size */
+#define SPR_IMMUCR_P1S 0x000007c0 /* Level 1 Page Size */
+#define SPR_IMMUCR_VADDR_WIDTH 0x0000f800 /* Virtual ADDR Width */
+#define SPR_IMMUCR_PADDR_WIDTH 0x000f0000 /* Physical ADDR Width */
+
+/*
+ * Bit definitions for the Data TLB Match Register
+ *
+ */
+#define SPR_DTLBMR_V 0x00000001 /* Valid */
+#define SPR_DTLBMR_PL1 0x00000002 /* Page Level 1 (if 0 then PL2) */
+#define SPR_DTLBMR_CID 0x0000003c /* Context ID */
+#define SPR_DTLBMR_LRU 0x000000c0 /* Least Recently Used */
+#define SPR_DTLBMR_VPN 0xfffff000 /* Virtual Page Number */
+
+/*
+ * Bit definitions for the Data TLB Translate Register
+ *
+ */
+#define SPR_DTLBTR_CC 0x00000001 /* Cache Coherency */
+#define SPR_DTLBTR_CI 0x00000002 /* Cache Inhibit */
+#define SPR_DTLBTR_WBC 0x00000004 /* Write-Back Cache */
+#define SPR_DTLBTR_WOM 0x00000008 /* Weakly-Ordered Memory */
+#define SPR_DTLBTR_A 0x00000010 /* Accessed */
+#define SPR_DTLBTR_D 0x00000020 /* Dirty */
+#define SPR_DTLBTR_URE 0x00000040 /* User Read Enable */
+#define SPR_DTLBTR_UWE 0x00000080 /* User Write Enable */
+#define SPR_DTLBTR_SRE 0x00000100 /* Supervisor Read Enable */
+#define SPR_DTLBTR_SWE 0x00000200 /* Supervisor Write Enable */
+#define SPR_DTLBTR_PPN 0xfffff000 /* Physical Page Number */
+
+/*
+ * Bit definitions for the Instruction TLB Match Register
+ *
+ */
+#define SPR_ITLBMR_V 0x00000001 /* Valid */
+#define SPR_ITLBMR_PL1 0x00000002 /* Page Level 1 (if 0 then PL2) */
+#define SPR_ITLBMR_CID 0x0000003c /* Context ID */
+#define SPR_ITLBMR_LRU 0x000000c0 /* Least Recently Used */
+#define SPR_ITLBMR_VPN 0xfffff000 /* Virtual Page Number */
+
+/*
+ * Bit definitions for the Instruction TLB Translate Register
+ *
+ */
+#define SPR_ITLBTR_CC 0x00000001 /* Cache Coherency */
+#define SPR_ITLBTR_CI 0x00000002 /* Cache Inhibit */
+#define SPR_ITLBTR_WBC 0x00000004 /* Write-Back Cache */
+#define SPR_ITLBTR_WOM 0x00000008 /* Weakly-Ordered Memory */
+#define SPR_ITLBTR_A 0x00000010 /* Accessed */
+#define SPR_ITLBTR_D 0x00000020 /* Dirty */
+#define SPR_ITLBTR_SXE 0x00000040 /* User Read Enable */
+#define SPR_ITLBTR_UXE 0x00000080 /* User Write Enable */
+#define SPR_ITLBTR_PPN 0xfffff000 /* Physical Page Number */
+
+/*
+ * Bit definitions for Data Cache Control register
+ *
+ */
+#define SPR_DCCR_EW 0x000000ff /* Enable ways */
+
+/*
+ * Bit definitions for Insn Cache Control register
+ *
+ */
+#define SPR_ICCR_EW 0x000000ff /* Enable ways */
+
+/*
+ * Bit definitions for Data Cache Configuration Register
+ *
+ */
+
+#define SPR_DCCFGR_NCW 0x00000007
+#define SPR_DCCFGR_NCS 0x00000078
+#define SPR_DCCFGR_CBS 0x00000080
+#define SPR_DCCFGR_CWS 0x00000100
+#define SPR_DCCFGR_CCRI 0x00000200
+#define SPR_DCCFGR_CBIRI 0x00000400
+#define SPR_DCCFGR_CBPRI 0x00000800
+#define SPR_DCCFGR_CBLRI 0x00001000
+#define SPR_DCCFGR_CBFRI 0x00002000
+#define SPR_DCCFGR_CBWBRI 0x00004000
+
+#define SPR_DCCFGR_NCW_OFF 0
+#define SPR_DCCFGR_NCS_OFF 3
+#define SPR_DCCFGR_CBS_OFF 7
+
+/*
+ * Bit definitions for Instruction Cache Configuration Register
+ *
+ */
+#define SPR_ICCFGR_NCW 0x00000007
+#define SPR_ICCFGR_NCS 0x00000078
+#define SPR_ICCFGR_CBS 0x00000080
+#define SPR_ICCFGR_CCRI 0x00000200
+#define SPR_ICCFGR_CBIRI 0x00000400
+#define SPR_ICCFGR_CBPRI 0x00000800
+#define SPR_ICCFGR_CBLRI 0x00001000
+
+#define SPR_ICCFGR_NCW_OFF 0
+#define SPR_ICCFGR_NCS_OFF 3
+#define SPR_ICCFGR_CBS_OFF 7
+
+/*
+ * Bit definitions for Data MMU Configuration Register
+ *
+ */
+
+#define SPR_DMMUCFGR_NTW 0x00000003
+#define SPR_DMMUCFGR_NTS 0x0000001C
+#define SPR_DMMUCFGR_NAE 0x000000E0
+#define SPR_DMMUCFGR_CRI 0x00000100
+#define SPR_DMMUCFGR_PRI 0x00000200
+#define SPR_DMMUCFGR_TEIRI 0x00000400
+#define SPR_DMMUCFGR_HTR 0x00000800
+
+#define SPR_DMMUCFGR_NTW_OFF 0
+#define SPR_DMMUCFGR_NTS_OFF 2
+
+/*
+ * Bit definitions for Instruction MMU Configuration Register
+ *
+ */
+
+#define SPR_IMMUCFGR_NTW 0x00000003
+#define SPR_IMMUCFGR_NTS 0x0000001C
+#define SPR_IMMUCFGR_NAE 0x000000E0
+#define SPR_IMMUCFGR_CRI 0x00000100
+#define SPR_IMMUCFGR_PRI 0x00000200
+#define SPR_IMMUCFGR_TEIRI 0x00000400
+#define SPR_IMMUCFGR_HTR 0x00000800
+
+#define SPR_IMMUCFGR_NTW_OFF 0
+#define SPR_IMMUCFGR_NTS_OFF 2
+
+/*
+ * Bit definitions for Debug Control registers
+ *
+ */
+#define SPR_DCR_DP 0x00000001 /* DVR/DCR present */
+#define SPR_DCR_CC 0x0000000e /* Compare condition */
+#define SPR_DCR_SC 0x00000010 /* Signed compare */
+#define SPR_DCR_CT 0x000000e0 /* Compare to */
+
+/* Bit results with SPR_DCR_CC mask */
+#define SPR_DCR_CC_MASKED 0x00000000
+#define SPR_DCR_CC_EQUAL 0x00000002
+#define SPR_DCR_CC_LESS 0x00000004
+#define SPR_DCR_CC_LESSE 0x00000006
+#define SPR_DCR_CC_GREAT 0x00000008
+#define SPR_DCR_CC_GREATE 0x0000000a
+#define SPR_DCR_CC_NEQUAL 0x0000000c
+
+/* Bit results with SPR_DCR_CT mask */
+#define SPR_DCR_CT_DISABLED 0x00000000
+#define SPR_DCR_CT_IFEA 0x00000020
+#define SPR_DCR_CT_LEA 0x00000040
+#define SPR_DCR_CT_SEA 0x00000060
+#define SPR_DCR_CT_LD 0x00000080
+#define SPR_DCR_CT_SD 0x000000a0
+#define SPR_DCR_CT_LSEA 0x000000c0
+#define SPR_DCR_CT_LSD 0x000000e0
+/* SPR_DCR_CT_LSD doesn't seem to be implemented anywhere in or1ksim. 2004-1-30 HP */
+
+/*
+ * Bit definitions for Debug Mode 1 register
+ *
+ */
+#define SPR_DMR1_CW 0x000fffff /* Chain register pair data */
+#define SPR_DMR1_CW0_AND 0x00000001
+#define SPR_DMR1_CW0_OR 0x00000002
+#define SPR_DMR1_CW0 (SPR_DMR1_CW0_AND | SPR_DMR1_CW0_OR)
+#define SPR_DMR1_CW1_AND 0x00000004
+#define SPR_DMR1_CW1_OR 0x00000008
+#define SPR_DMR1_CW1 (SPR_DMR1_CW1_AND | SPR_DMR1_CW1_OR)
+#define SPR_DMR1_CW2_AND 0x00000010
+#define SPR_DMR1_CW2_OR 0x00000020
+#define SPR_DMR1_CW2 (SPR_DMR1_CW2_AND | SPR_DMR1_CW2_OR)
+#define SPR_DMR1_CW3_AND 0x00000040
+#define SPR_DMR1_CW3_OR 0x00000080
+#define SPR_DMR1_CW3 (SPR_DMR1_CW3_AND | SPR_DMR1_CW3_OR)
+#define SPR_DMR1_CW4_AND 0x00000100
+#define SPR_DMR1_CW4_OR 0x00000200
+#define SPR_DMR1_CW4 (SPR_DMR1_CW4_AND | SPR_DMR1_CW4_OR)
+#define SPR_DMR1_CW5_AND 0x00000400
+#define SPR_DMR1_CW5_OR 0x00000800
+#define SPR_DMR1_CW5 (SPR_DMR1_CW5_AND | SPR_DMR1_CW5_OR)
+#define SPR_DMR1_CW6_AND 0x00001000
+#define SPR_DMR1_CW6_OR 0x00002000
+#define SPR_DMR1_CW6 (SPR_DMR1_CW6_AND | SPR_DMR1_CW6_OR)
+#define SPR_DMR1_CW7_AND 0x00004000
+#define SPR_DMR1_CW7_OR 0x00008000
+#define SPR_DMR1_CW7 (SPR_DMR1_CW7_AND | SPR_DMR1_CW7_OR)
+#define SPR_DMR1_CW8_AND 0x00010000
+#define SPR_DMR1_CW8_OR 0x00020000
+#define SPR_DMR1_CW8 (SPR_DMR1_CW8_AND | SPR_DMR1_CW8_OR)
+#define SPR_DMR1_CW9_AND 0x00040000
+#define SPR_DMR1_CW9_OR 0x00080000
+#define SPR_DMR1_CW9 (SPR_DMR1_CW9_AND | SPR_DMR1_CW9_OR)
+#define SPR_DMR1_RES1 0x00300000 /* Reserved */
+#define SPR_DMR1_ST 0x00400000 /* Single-step trace*/
+#define SPR_DMR1_BT 0x00800000 /* Branch trace */
+#define SPR_DMR1_RES2 0xff000000 /* Reserved */
+
+/*
+ * Bit definitions for Debug Mode 2 register. AWTC and WGB corrected by JPB
+ *
+ */
+#define SPR_DMR2_WCE0 0x00000001 /* Watchpoint counter 0 enable */
+#define SPR_DMR2_WCE1 0x00000002 /* Watchpoint counter 0 enable */
+#define SPR_DMR2_AWTC 0x00000ffc /* Assign watchpoints to counters */
+#define SPR_DMR2_AWTC_OFF 2 /* Bit offset to AWTC field */
+#define SPR_DMR2_WGB 0x003ff000 /* Watchpoints generating breakpoint */
+#define SPR_DMR2_WGB_OFF 12 /* Bit offset to WGB field */
+#define SPR_DMR2_WBS 0xffc00000 /* JPB: Watchpoint status */
+#define SPR_DMR2_WBS_OFF 22 /* Bit offset to WBS field */
+
+/*
+ * Bit definitions for Debug watchpoint counter registers
+ *
+ */
+#define SPR_DWCR_COUNT 0x0000ffff /* Count */
+#define SPR_DWCR_MATCH 0xffff0000 /* Match */
+#define SPR_DWCR_MATCH_OFF 16 /* Match bit offset */
+
+/*
+ * Bit definitions for Debug stop register
+ *
+ */
+#define SPR_DSR_RSTE 0x00000001 /* Reset exception */
+#define SPR_DSR_BUSEE 0x00000002 /* Bus error exception */
+#define SPR_DSR_DPFE 0x00000004 /* Data Page Fault exception */
+#define SPR_DSR_IPFE 0x00000008 /* Insn Page Fault exception */
+#define SPR_DSR_TTE 0x00000010 /* Tick Timer exception */
+#define SPR_DSR_AE 0x00000020 /* Alignment exception */
+#define SPR_DSR_IIE 0x00000040 /* Illegal Instruction exception */
+#define SPR_DSR_IE 0x00000080 /* Interrupt exception */
+#define SPR_DSR_DME 0x00000100 /* DTLB miss exception */
+#define SPR_DSR_IME 0x00000200 /* ITLB miss exception */
+#define SPR_DSR_RE 0x00000400 /* Range exception */
+#define SPR_DSR_SCE 0x00000800 /* System call exception */
+#define SPR_DSR_FPE 0x00001000 /* Floating Point Exception */
+#define SPR_DSR_TE 0x00002000 /* Trap exception */
+
+/*
+ * Bit definitions for Debug reason register
+ *
+ */
+#define SPR_DRR_RSTE 0x00000001 /* Reset exception */
+#define SPR_DRR_BUSEE 0x00000002 /* Bus error exception */
+#define SPR_DRR_DPFE 0x00000004 /* Data Page Fault exception */
+#define SPR_DRR_IPFE 0x00000008 /* Insn Page Fault exception */
+#define SPR_DRR_TTE 0x00000010 /* Tick Timer exception */
+#define SPR_DRR_AE 0x00000020 /* Alignment exception */
+#define SPR_DRR_IIE 0x00000040 /* Illegal Instruction exception */
+#define SPR_DRR_IE 0x00000080 /* Interrupt exception */
+#define SPR_DRR_DME 0x00000100 /* DTLB miss exception */
+#define SPR_DRR_IME 0x00000200 /* ITLB miss exception */
+#define SPR_DRR_RE 0x00000400 /* Range exception */
+#define SPR_DRR_SCE 0x00000800 /* System call exception */
+#define SPR_DRR_FPE 0x00001000 /* Floating Point Exception */
+#define SPR_DRR_TE 0x00002000 /* Trap exception */
+
+/*
+ * Bit definitions for Performance counters mode registers
+ *
+ */
+#define SPR_PCMR_CP 0x00000001 /* Counter present */
+#define SPR_PCMR_UMRA 0x00000002 /* User mode read access */
+#define SPR_PCMR_CISM 0x00000004 /* Count in supervisor mode */
+#define SPR_PCMR_CIUM 0x00000008 /* Count in user mode */
+#define SPR_PCMR_LA 0x00000010 /* Load access event */
+#define SPR_PCMR_SA 0x00000020 /* Store access event */
+#define SPR_PCMR_IF 0x00000040 /* Instruction fetch event*/
+#define SPR_PCMR_DCM 0x00000080 /* Data cache miss event */
+#define SPR_PCMR_ICM 0x00000100 /* Insn cache miss event */
+#define SPR_PCMR_IFS 0x00000200 /* Insn fetch stall event */
+#define SPR_PCMR_LSUS 0x00000400 /* LSU stall event */
+#define SPR_PCMR_BS 0x00000800 /* Branch stall event */
+#define SPR_PCMR_DTLBM 0x00001000 /* DTLB miss event */
+#define SPR_PCMR_ITLBM 0x00002000 /* ITLB miss event */
+#define SPR_PCMR_DDS 0x00004000 /* Data dependency stall event */
+#define SPR_PCMR_WPE 0x03ff8000 /* Watchpoint events */
+
+/*
+ * Bit definitions for the Power management register
+ *
+ */
+#define SPR_PMR_SDF 0x0000000f /* Slow down factor */
+#define SPR_PMR_DME 0x00000010 /* Doze mode enable */
+#define SPR_PMR_SME 0x00000020 /* Sleep mode enable */
+#define SPR_PMR_DCGE 0x00000040 /* Dynamic clock gating enable */
+#define SPR_PMR_SUME 0x00000080 /* Suspend mode enable */
+
+/*
+ * Bit definitions for PICMR
+ *
+ */
+#define SPR_PICMR_IUM 0xfffffffc /* Interrupt unmask */
+
+/*
+ * Bit definitions for PICPR
+ *
+ */
+#define SPR_PICPR_IPRIO 0xfffffffc /* Interrupt priority */
+
+/*
+ * Bit definitions for PICSR
+ *
+ */
+#define SPR_PICSR_IS 0xffffffff /* Interrupt status */
+
+/*
+ * Bit definitions for Tick Timer Control Register
+ *
+ */
+
+#define SPR_TTCR_CNT 0xffffffff /* Count, time period */
+#define SPR_TTMR_TP 0x0fffffff /* Time period */
+#define SPR_TTMR_IP 0x10000000 /* Interrupt Pending */
+#define SPR_TTMR_IE 0x20000000 /* Interrupt Enable */
+#define SPR_TTMR_DI 0x00000000 /* Disabled */
+#define SPR_TTMR_RT 0x40000000 /* Restart tick */
+#define SPR_TTMR_SR 0x80000000 /* Single run */
+#define SPR_TTMR_CR 0xc0000000 /* Continuous run */
+#define SPR_TTMR_M 0xc0000000 /* Tick mode */
+
+/*
+ * Bit definitions for the FP Control Status Register
+ *
+ */
+#define SPR_FPCSR_FPEE 0x00000001 /* Floating Point Exception Enable */
+#define SPR_FPCSR_RM 0x00000006 /* Rounding Mode */
+#define SPR_FPCSR_OVF 0x00000008 /* Overflow Flag */
+#define SPR_FPCSR_UNF 0x00000010 /* Underflow Flag */
+#define SPR_FPCSR_SNF 0x00000020 /* SNAN Flag */
+#define SPR_FPCSR_QNF 0x00000040 /* QNAN Flag */
+#define SPR_FPCSR_ZF 0x00000080 /* Zero Flag */
+#define SPR_FPCSR_IXF 0x00000100 /* Inexact Flag */
+#define SPR_FPCSR_IVF 0x00000200 /* Invalid Flag */
+#define SPR_FPCSR_INF 0x00000400 /* Infinity Flag */
+#define SPR_FPCSR_DZF 0x00000800 /* Divide By Zero Flag */
+#define SPR_FPCSR_ALLF (SPR_FPCSR_OVF | SPR_FPCSR_UNF | SPR_FPCSR_SNF | \
+ SPR_FPCSR_QNF | SPR_FPCSR_ZF | SPR_FPCSR_IXF | \
+ SPR_FPCSR_IVF | SPR_FPCSR_INF | SPR_FPCSR_DZF)
+
+#define FPCSR_RM_RN (0<<1)
+#define FPCSR_RM_RZ (1<<1)
+#define FPCSR_RM_RIP (2<<1)
+#define FPCSR_RM_RIN (3<<1)
+
+/*
+ * l.nop constants
+ *
+ */
+#define NOP_NOP 0x0000 /* Normal nop instruction */
+#define NOP_EXIT 0x0001 /* End of simulation */
+#define NOP_REPORT 0x0002 /* Simple report */
+/*#define NOP_PRINTF 0x0003 Simprintf instruction (obsolete)*/
+#define NOP_PUTC 0x0004 /* JPB: Simputc instruction */
+#define NOP_CNT_RESET 0x0005 /* Reset statistics counters */
+#define NOP_GET_TICKS 0x0006 /* JPB: Get # ticks running */
+#define NOP_GET_PS 0x0007 /* JPB: Get picosecs/cycle */
+#define NOP_REPORT_FIRST 0x0400 /* Report with number */
+#define NOP_REPORT_LAST 0x03ff /* Report with number */
+
+#endif /* SPR_DEFS__H */
diff --git a/arch/openrisc/include/asm/string.h b/arch/openrisc/include/asm/string.h
new file mode 100644
index 0000000000..69b975454f
--- /dev/null
+++ b/arch/openrisc/include/asm/string.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_OPENRISC_STRING_H
+#define __ASM_OPENRISC_STRING_H
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *s, int c, __kernel_size_t n);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *dest, __const void *src, __kernel_size_t n);
+
+#endif /* __ASM_OPENRISC_STRING_H */
diff --git a/arch/openrisc/include/asm/syscall.h b/arch/openrisc/include/asm/syscall.h
new file mode 100644
index 0000000000..903ed882bd
--- /dev/null
+++ b/arch/openrisc/include/asm/syscall.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef __ASM_OPENRISC_SYSCALL_H__
+#define __ASM_OPENRISC_SYSCALL_H__
+
+#include <uapi/linux/audit.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+
+static inline int
+syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
+{
+ return regs->orig_gpr11;
+}
+
+static inline void
+syscall_rollback(struct task_struct *task, struct pt_regs *regs)
+{
+ regs->gpr[11] = regs->orig_gpr11;
+}
+
+static inline long
+syscall_get_error(struct task_struct *task, struct pt_regs *regs)
+{
+ return IS_ERR_VALUE(regs->gpr[11]) ? regs->gpr[11] : 0;
+}
+
+static inline long
+syscall_get_return_value(struct task_struct *task, struct pt_regs *regs)
+{
+ return regs->gpr[11];
+}
+
+static inline void
+syscall_set_return_value(struct task_struct *task, struct pt_regs *regs,
+ int error, long val)
+{
+ regs->gpr[11] = (long) error ?: val;
+}
+
+static inline void
+syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
+ unsigned long *args)
+{
+ memcpy(args, &regs->gpr[3], 6 * sizeof(args[0]));
+}
+
+static inline int syscall_get_arch(struct task_struct *task)
+{
+ return AUDIT_ARCH_OPENRISC;
+}
+#endif
diff --git a/arch/openrisc/include/asm/syscalls.h b/arch/openrisc/include/asm/syscalls.h
new file mode 100644
index 0000000000..aa1c7e9872
--- /dev/null
+++ b/arch/openrisc/include/asm/syscalls.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef __ASM_OPENRISC_SYSCALLS_H
+#define __ASM_OPENRISC_SYSCALLS_H
+
+asmlinkage long sys_or1k_atomic(unsigned long type, unsigned long *v1,
+ unsigned long *v2);
+
+#include <asm-generic/syscalls.h>
+
+asmlinkage long __sys_clone(unsigned long clone_flags, unsigned long newsp,
+ void __user *parent_tid, void __user *child_tid, int tls);
+asmlinkage long __sys_clone3(struct clone_args __user *uargs, size_t size);
+asmlinkage long __sys_fork(void);
+
+#define sys_clone __sys_clone
+#define sys_clone3 __sys_clone3
+#define sys_fork __sys_fork
+
+#endif /* __ASM_OPENRISC_SYSCALLS_H */
diff --git a/arch/openrisc/include/asm/thread_info.h b/arch/openrisc/include/asm/thread_info.h
new file mode 100644
index 0000000000..4af3049c34
--- /dev/null
+++ b/arch/openrisc/include/asm/thread_info.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+#include <asm/processor.h>
+#endif
+
+
+/* THREAD_SIZE is the size of the task_struct/kernel_stack combo.
+ * normally, the stack is found by doing something like p + THREAD_SIZE
+ * in or1k, a page is 8192 bytes, which seems like a sane size
+ */
+
+#define THREAD_SIZE_ORDER 0
+#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ * must also be changed
+ */
+#ifndef __ASSEMBLY__
+
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ unsigned long flags; /* low level flags */
+ __u32 cpu; /* current CPU */
+ __s32 preempt_count; /* 0 => preemptable, <0 => BUG */
+
+ __u8 supervisor_stack[0];
+
+ /* saved context data */
+ unsigned long ksp;
+};
+#endif
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .flags = 0, \
+ .cpu = 0, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
+ .ksp = 0, \
+}
+
+/* how to get the thread information struct from C */
+register struct thread_info *current_thread_info_reg asm("r10");
+#define current_thread_info() (current_thread_info_reg)
+
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * thread information flags
+ * these are process state flags that various assembly files may need to
+ * access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */
+#define TIF_SIGPENDING 2 /* signal pending */
+#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
+#define TIF_SINGLESTEP 4 /* restore singlestep on return to user
+ * mode
+ */
+#define TIF_NOTIFY_SIGNAL 5 /* signal notifications exist */
+#define TIF_SYSCALL_TRACEPOINT 8 /* for ftrace syscall instrumentation */
+#define TIF_RESTORE_SIGMASK 9
+#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling * TIF_NEED_RESCHED
+ */
+#define TIF_MEMDIE 17
+
+#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
+#define _TIF_NOTIFY_SIGNAL (1<<TIF_NOTIFY_SIGNAL)
+#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
+
+
+/* Work to do when returning from interrupt/exception */
+/* For OpenRISC, this is anything in the LSW other than syscall trace */
+#define _TIF_WORK_MASK (0xff & ~(_TIF_SYSCALL_TRACE|_TIF_SINGLESTEP))
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/openrisc/include/asm/time.h b/arch/openrisc/include/asm/time.h
new file mode 100644
index 0000000000..313ee97577
--- /dev/null
+++ b/arch/openrisc/include/asm/time.h
@@ -0,0 +1,23 @@
+/*
+ * OpenRISC timer API
+ *
+ * Copyright (C) 2017 by Stafford Horne (shorne@gmail.com)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_OR1K_TIME_H
+#define __ASM_OR1K_TIME_H
+
+extern void openrisc_clockevent_init(void);
+
+extern void openrisc_timer_set(unsigned long count);
+extern void openrisc_timer_set_next(unsigned long delta);
+
+#ifdef CONFIG_SMP
+extern void synchronise_count_master(int cpu);
+extern void synchronise_count_slave(int cpu);
+#endif
+
+#endif /* __ASM_OR1K_TIME_H */
diff --git a/arch/openrisc/include/asm/timex.h b/arch/openrisc/include/asm/timex.h
new file mode 100644
index 0000000000..5487fa93dd
--- /dev/null
+++ b/arch/openrisc/include/asm/timex.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#ifndef __ASM_OPENRISC_TIMEX_H
+#define __ASM_OPENRISC_TIMEX_H
+
+#define get_cycles get_cycles
+
+#include <asm-generic/timex.h>
+#include <asm/spr.h>
+#include <asm/spr_defs.h>
+
+static inline cycles_t get_cycles(void)
+{
+ return mfspr(SPR_TTCR);
+}
+#define get_cycles get_cycles
+
+/* This isn't really used any more */
+#define CLOCK_TICK_RATE 1000
+
+#define ARCH_HAS_READ_CURRENT_TIMER
+
+#endif
diff --git a/arch/openrisc/include/asm/tlb.h b/arch/openrisc/include/asm/tlb.h
new file mode 100644
index 0000000000..1936d0494b
--- /dev/null
+++ b/arch/openrisc/include/asm/tlb.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef __ASM_OPENRISC_TLB_H__
+#define __ASM_OPENRISC_TLB_H__
+
+/*
+ * OpenRISC doesn't have an efficient flush_tlb_range() so use flush_tlb_mm()
+ * for everything.
+ */
+
+#include <linux/pagemap.h>
+#include <asm-generic/tlb.h>
+
+#endif /* __ASM_OPENRISC_TLB_H__ */
diff --git a/arch/openrisc/include/asm/tlbflush.h b/arch/openrisc/include/asm/tlbflush.h
new file mode 100644
index 0000000000..dbf030365a
--- /dev/null
+++ b/arch/openrisc/include/asm/tlbflush.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef __ASM_OPENRISC_TLBFLUSH_H
+#define __ASM_OPENRISC_TLBFLUSH_H
+
+#include <linux/mm.h>
+#include <asm/processor.h>
+#include <asm/current.h>
+#include <linux/sched.h>
+
+/*
+ * - flush_tlb() flushes the current mm struct TLBs
+ * - flush_tlb_all() flushes all processes TLBs
+ * - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ * - flush_tlb_page(vma, vmaddr) flushes one page
+ * - flush_tlb_range(vma, start, end) flushes a range of pages
+ */
+extern void local_flush_tlb_all(void);
+extern void local_flush_tlb_mm(struct mm_struct *mm);
+extern void local_flush_tlb_page(struct vm_area_struct *vma,
+ unsigned long addr);
+extern void local_flush_tlb_range(struct vm_area_struct *vma,
+ unsigned long start,
+ unsigned long end);
+
+#ifndef CONFIG_SMP
+#define flush_tlb_all local_flush_tlb_all
+#define flush_tlb_mm local_flush_tlb_mm
+#define flush_tlb_page local_flush_tlb_page
+#define flush_tlb_range local_flush_tlb_range
+#else
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end);
+#endif
+
+static inline void flush_tlb(void)
+{
+ flush_tlb_mm(current->mm);
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start,
+ unsigned long end)
+{
+ flush_tlb_range(NULL, start, end);
+}
+
+#endif /* __ASM_OPENRISC_TLBFLUSH_H */
diff --git a/arch/openrisc/include/asm/uaccess.h b/arch/openrisc/include/asm/uaccess.h
new file mode 100644
index 0000000000..d6500a374e
--- /dev/null
+++ b/arch/openrisc/include/asm/uaccess.h
@@ -0,0 +1,238 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ */
+
+#ifndef __ASM_OPENRISC_UACCESS_H
+#define __ASM_OPENRISC_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/prefetch.h>
+#include <linux/string.h>
+#include <asm/page.h>
+#include <asm/extable.h>
+#include <asm-generic/access_ok.h>
+
+/*
+ * These are the main single-value transfer routines. They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the uglyness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ *
+ * As we use the same address space for kernel and user data on the
+ * PowerPC, we can just do these as direct assignments. (Of course, the
+ * exception handling means that it's no longer "just"...)
+ */
+#define get_user(x, ptr) \
+ __get_user_check((x), (ptr), sizeof(*(ptr)))
+#define put_user(x, ptr) \
+ __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+#define __get_user(x, ptr) \
+ __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __put_user(x, ptr) \
+ __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+extern long __put_user_bad(void);
+
+#define __put_user_nocheck(x, ptr, size) \
+({ \
+ long __pu_err; \
+ __put_user_size((x), (ptr), (size), __pu_err); \
+ __pu_err; \
+})
+
+#define __put_user_check(x, ptr, size) \
+({ \
+ long __pu_err = -EFAULT; \
+ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ if (access_ok(__pu_addr, size)) \
+ __put_user_size((x), __pu_addr, (size), __pu_err); \
+ __pu_err; \
+})
+
+#define __put_user_size(x, ptr, size, retval) \
+do { \
+ retval = 0; \
+ switch (size) { \
+ case 1: __put_user_asm(x, ptr, retval, "l.sb"); break; \
+ case 2: __put_user_asm(x, ptr, retval, "l.sh"); break; \
+ case 4: __put_user_asm(x, ptr, retval, "l.sw"); break; \
+ case 8: __put_user_asm2(x, ptr, retval); break; \
+ default: __put_user_bad(); \
+ } \
+} while (0)
+
+struct __large_struct {
+ unsigned long buf[100];
+};
+#define __m(x) (*(struct __large_struct *)(x))
+
+/*
+ * We don't tell gcc that we are accessing memory, but this is OK
+ * because we do not write to any memory gcc knows about, so there
+ * are no aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, op) \
+ __asm__ __volatile__( \
+ "1: "op" 0(%2),%1\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: l.addi %0,r0,%3\n" \
+ " l.j 2b\n" \
+ " l.nop\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,3b\n" \
+ ".previous" \
+ : "=r"(err) \
+ : "r"(x), "r"(addr), "i"(-EFAULT), "0"(err))
+
+#define __put_user_asm2(x, addr, err) \
+ __asm__ __volatile__( \
+ "1: l.sw 0(%2),%1\n" \
+ "2: l.sw 4(%2),%H1\n" \
+ "3:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "4: l.addi %0,r0,%3\n" \
+ " l.j 3b\n" \
+ " l.nop\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,4b\n" \
+ " .long 2b,4b\n" \
+ ".previous" \
+ : "=r"(err) \
+ : "r"(x), "r"(addr), "i"(-EFAULT), "0"(err))
+
+#define __get_user_nocheck(x, ptr, size) \
+({ \
+ long __gu_err; \
+ __get_user_size((x), (ptr), (size), __gu_err); \
+ __gu_err; \
+})
+
+#define __get_user_check(x, ptr, size) \
+({ \
+ long __gu_err = -EFAULT; \
+ const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
+ if (access_ok(__gu_addr, size)) \
+ __get_user_size((x), __gu_addr, (size), __gu_err); \
+ else \
+ (x) = (__typeof__(*(ptr))) 0; \
+ __gu_err; \
+})
+
+extern long __get_user_bad(void);
+
+#define __get_user_size(x, ptr, size, retval) \
+do { \
+ retval = 0; \
+ switch (size) { \
+ case 1: __get_user_asm(x, ptr, retval, "l.lbz"); break; \
+ case 2: __get_user_asm(x, ptr, retval, "l.lhz"); break; \
+ case 4: __get_user_asm(x, ptr, retval, "l.lwz"); break; \
+ case 8: __get_user_asm2(x, ptr, retval); break; \
+ default: (x) = (__typeof__(*(ptr)))__get_user_bad(); \
+ } \
+} while (0)
+
+#define __get_user_asm(x, addr, err, op) \
+{ \
+ unsigned long __gu_tmp; \
+ __asm__ __volatile__( \
+ "1: "op" %1,0(%2)\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: l.addi %0,r0,%3\n" \
+ " l.addi %1,r0,0\n" \
+ " l.j 2b\n" \
+ " l.nop\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,3b\n" \
+ ".previous" \
+ : "=r"(err), "=r"(__gu_tmp) \
+ : "r"(addr), "i"(-EFAULT), "0"(err)); \
+ (x) = (__typeof__(*(addr)))__gu_tmp; \
+}
+
+#define __get_user_asm2(x, addr, err) \
+{ \
+ unsigned long long __gu_tmp; \
+ __asm__ __volatile__( \
+ "1: l.lwz %1,0(%2)\n" \
+ "2: l.lwz %H1,4(%2)\n" \
+ "3:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "4: l.addi %0,r0,%3\n" \
+ " l.addi %1,r0,0\n" \
+ " l.addi %H1,r0,0\n" \
+ " l.j 3b\n" \
+ " l.nop\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,4b\n" \
+ " .long 2b,4b\n" \
+ ".previous" \
+ : "=r"(err), "=&r"(__gu_tmp) \
+ : "r"(addr), "i"(-EFAULT), "0"(err)); \
+ (x) = (__typeof__(*(addr)))( \
+ (__typeof__((x)-(x)))__gu_tmp); \
+}
+
+/* more complex routines */
+
+extern unsigned long __must_check
+__copy_tofrom_user(void *to, const void *from, unsigned long size);
+static inline unsigned long
+raw_copy_from_user(void *to, const void __user *from, unsigned long size)
+{
+ return __copy_tofrom_user(to, (__force const void *)from, size);
+}
+static inline unsigned long
+raw_copy_to_user(void __user *to, const void *from, unsigned long size)
+{
+ return __copy_tofrom_user((__force void *)to, from, size);
+}
+#define INLINE_COPY_FROM_USER
+#define INLINE_COPY_TO_USER
+
+extern unsigned long __clear_user(void __user *addr, unsigned long size);
+
+static inline __must_check unsigned long
+clear_user(void __user *addr, unsigned long size)
+{
+ if (likely(access_ok(addr, size)))
+ size = __clear_user(addr, size);
+ return size;
+}
+
+extern long strncpy_from_user(char *dest, const char __user *src, long count);
+
+extern __must_check long strnlen_user(const char __user *str, long n);
+
+#endif /* __ASM_OPENRISC_UACCESS_H */
diff --git a/arch/openrisc/include/asm/unwinder.h b/arch/openrisc/include/asm/unwinder.h
new file mode 100644
index 0000000000..165ec6f02a
--- /dev/null
+++ b/arch/openrisc/include/asm/unwinder.h
@@ -0,0 +1,20 @@
+/*
+ * OpenRISC unwinder.h
+ *
+ * Architecture API for unwinding stacks.
+ *
+ * Copyright (C) 2017 Stafford Horne <shorne@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_OPENRISC_UNWINDER_H
+#define __ASM_OPENRISC_UNWINDER_H
+
+void unwind_stack(void *data, unsigned long *stack,
+ void (*trace)(void *data, unsigned long addr,
+ int reliable));
+
+#endif /* __ASM_OPENRISC_UNWINDER_H */
diff --git a/arch/openrisc/include/asm/vmalloc.h b/arch/openrisc/include/asm/vmalloc.h
new file mode 100644
index 0000000000..75435eceec
--- /dev/null
+++ b/arch/openrisc/include/asm/vmalloc.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_OPENRISC_VMALLOC_H
+#define _ASM_OPENRISC_VMALLOC_H
+
+#endif /* _ASM_OPENRISC_VMALLOC_H */
diff --git a/arch/openrisc/include/uapi/asm/Kbuild b/arch/openrisc/include/uapi/asm/Kbuild
new file mode 100644
index 0000000000..e784701419
--- /dev/null
+++ b/arch/openrisc/include/uapi/asm/Kbuild
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+generic-y += ucontext.h
diff --git a/arch/openrisc/include/uapi/asm/byteorder.h b/arch/openrisc/include/uapi/asm/byteorder.h
new file mode 100644
index 0000000000..60d14f7e14
--- /dev/null
+++ b/arch/openrisc/include/uapi/asm/byteorder.h
@@ -0,0 +1 @@
+#include <linux/byteorder/big_endian.h>
diff --git a/arch/openrisc/include/uapi/asm/elf.h b/arch/openrisc/include/uapi/asm/elf.h
new file mode 100644
index 0000000000..6868f81c28
--- /dev/null
+++ b/arch/openrisc/include/uapi/asm/elf.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _UAPI__ASM_OPENRISC_ELF_H
+#define _UAPI__ASM_OPENRISC_ELF_H
+
+/*
+ * This files is partially exported to userspace. This allows us to keep
+ * the ELF bits in one place which should assist in keeping the kernel and
+ * userspace in sync.
+ */
+
+/*
+ * ELF register definitions..
+ */
+
+/* for struct user_regs_struct definition */
+#include <asm/ptrace.h>
+
+/* The OR1K relocation types... not all relevant for module loader */
+#define R_OR32_NONE 0
+#define R_OR32_32 1
+#define R_OR32_16 2
+#define R_OR32_8 3
+#define R_OR32_CONST 4
+#define R_OR32_CONSTH 5
+#define R_OR32_JUMPTARG 6
+#define R_OR32_VTINHERIT 7
+#define R_OR32_VTENTRY 8
+
+typedef unsigned long elf_greg_t;
+
+/*
+ * Note that NGREG is defined to ELF_NGREG in include/linux/elfcore.h, and is
+ * thus exposed to user-space.
+ */
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct __or1k_fpu_state elf_fpregset_t;
+
+/* EM_OPENRISC is defined in linux/elf-em.h */
+#define EM_OR32 0x8472
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_ARCH EM_OR32
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2MSB
+
+#endif /* _UAPI__ASM_OPENRISC_ELF_H */
diff --git a/arch/openrisc/include/uapi/asm/param.h b/arch/openrisc/include/uapi/asm/param.h
new file mode 100644
index 0000000000..103471e310
--- /dev/null
+++ b/arch/openrisc/include/uapi/asm/param.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_PARAM_H
+#define __ASM_OPENRISC_PARAM_H
+
+#define EXEC_PAGESIZE 8192
+
+#include <asm-generic/param.h>
+
+#endif /* __ASM_OPENRISC_PARAM_H */
diff --git a/arch/openrisc/include/uapi/asm/ptrace.h b/arch/openrisc/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000000..a77cc9915c
--- /dev/null
+++ b/arch/openrisc/include/uapi/asm/ptrace.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _UAPI__ASM_OPENRISC_PTRACE_H
+#define _UAPI__ASM_OPENRISC_PTRACE_H
+
+#ifndef __ASSEMBLY__
+/*
+ * This is the layout of the regset returned by the GETREGSET ptrace call
+ */
+struct user_regs_struct {
+ /* GPR R0-R31... */
+ unsigned long gpr[32];
+ unsigned long pc;
+ unsigned long sr;
+};
+
+struct __or1k_fpu_state {
+ unsigned long fpcsr;
+};
+#endif
+
+
+#endif /* _UAPI__ASM_OPENRISC_PTRACE_H */
diff --git a/arch/openrisc/include/uapi/asm/sigcontext.h b/arch/openrisc/include/uapi/asm/sigcontext.h
new file mode 100644
index 0000000000..e7ffb58ff5
--- /dev/null
+++ b/arch/openrisc/include/uapi/asm/sigcontext.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_OPENRISC_SIGCONTEXT_H
+#define __ASM_OPENRISC_SIGCONTEXT_H
+
+#include <asm/ptrace.h>
+
+/* This struct is saved by setup_frame in signal.c, to keep the current
+ context while a signal handler is executed. It's restored by sys_sigreturn.
+*/
+
+struct sigcontext {
+ struct user_regs_struct regs; /* needs to be first */
+ union {
+ unsigned long fpcsr;
+ unsigned long oldmask; /* unused */
+ };
+};
+
+#endif /* __ASM_OPENRISC_SIGCONTEXT_H */
diff --git a/arch/openrisc/include/uapi/asm/unistd.h b/arch/openrisc/include/uapi/asm/unistd.h
new file mode 100644
index 0000000000..fae34c60fa
--- /dev/null
+++ b/arch/openrisc/include/uapi/asm/unistd.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#define sys_mmap2 sys_mmap_pgoff
+
+#define __ARCH_WANT_RENAMEAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SET_GET_RLIMIT
+#define __ARCH_WANT_SYS_FORK
+#define __ARCH_WANT_SYS_CLONE
+#define __ARCH_WANT_SYS_CLONE3
+#define __ARCH_WANT_TIME32_SYSCALLS
+
+#include <asm-generic/unistd.h>
+
+#define __NR_or1k_atomic __NR_arch_specific_syscall
+__SYSCALL(__NR_or1k_atomic, sys_or1k_atomic)
diff --git a/arch/openrisc/kernel/.gitignore b/arch/openrisc/kernel/.gitignore
new file mode 100644
index 0000000000..bbb90f92d0
--- /dev/null
+++ b/arch/openrisc/kernel/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+vmlinux.lds
diff --git a/arch/openrisc/kernel/Makefile b/arch/openrisc/kernel/Makefile
new file mode 100644
index 0000000000..79129161f3
--- /dev/null
+++ b/arch/openrisc/kernel/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the linux kernel.
+#
+
+extra-y := vmlinux.lds
+
+obj-y := head.o setup.o or32_ksyms.o process.o dma.o \
+ traps.o time.o irq.o entry.o ptrace.o signal.o \
+ sys_call_table.o unwinder.o
+
+obj-$(CONFIG_SMP) += smp.o sync-timer.o
+obj-$(CONFIG_STACKTRACE) += stacktrace.o
+obj-$(CONFIG_MODULES) += module.o
+obj-$(CONFIG_OF) += prom.o
+
+clean:
diff --git a/arch/openrisc/kernel/asm-offsets.c b/arch/openrisc/kernel/asm-offsets.c
new file mode 100644
index 0000000000..710651d5aa
--- /dev/null
+++ b/arch/openrisc/kernel/asm-offsets.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC asm-offsets.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * This program is used to generate definitions needed by
+ * assembly language modules.
+ *
+ * We use the technique used in the OSF Mach kernel code:
+ * generate asm statements containing #defines,
+ * compile this file to assembler, and then extract the
+ * #defines from the assembly-language output.
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/thread_info.h>
+#include <linux/kbuild.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+
+int main(void)
+{
+ /* offsets into the task_struct */
+ DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
+ DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
+ DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
+ DEFINE(TASK_MM, offsetof(struct task_struct, mm));
+ DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+
+ /* offsets into thread_info */
+ DEFINE(TI_TASK, offsetof(struct thread_info, task));
+ DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+ DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
+ DEFINE(TI_KSP, offsetof(struct thread_info, ksp));
+
+ DEFINE(PT_SIZE, sizeof(struct pt_regs));
+
+ /* Interrupt register frame */
+ DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD);
+ DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs));
+
+ DEFINE(NUM_USER_SEGMENTS, TASK_SIZE >> 28);
+ return 0;
+}
diff --git a/arch/openrisc/kernel/dma.c b/arch/openrisc/kernel/dma.c
new file mode 100644
index 0000000000..b3edbb33b6
--- /dev/null
+++ b/arch/openrisc/kernel/dma.c
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * DMA mapping callbacks...
+ */
+
+#include <linux/dma-map-ops.h>
+#include <linux/pagewalk.h>
+
+#include <asm/cpuinfo.h>
+#include <asm/spr_defs.h>
+#include <asm/tlbflush.h>
+
+static int
+page_set_nocache(pte_t *pte, unsigned long addr,
+ unsigned long next, struct mm_walk *walk)
+{
+ unsigned long cl;
+ struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()];
+
+ pte_val(*pte) |= _PAGE_CI;
+
+ /*
+ * Flush the page out of the TLB so that the new page flags get
+ * picked up next time there's an access
+ */
+ flush_tlb_kernel_range(addr, addr + PAGE_SIZE);
+
+ /* Flush page out of dcache */
+ for (cl = __pa(addr); cl < __pa(next); cl += cpuinfo->dcache_block_size)
+ mtspr(SPR_DCBFR, cl);
+
+ return 0;
+}
+
+static const struct mm_walk_ops set_nocache_walk_ops = {
+ .pte_entry = page_set_nocache,
+};
+
+static int
+page_clear_nocache(pte_t *pte, unsigned long addr,
+ unsigned long next, struct mm_walk *walk)
+{
+ pte_val(*pte) &= ~_PAGE_CI;
+
+ /*
+ * Flush the page out of the TLB so that the new page flags get
+ * picked up next time there's an access
+ */
+ flush_tlb_kernel_range(addr, addr + PAGE_SIZE);
+
+ return 0;
+}
+
+static const struct mm_walk_ops clear_nocache_walk_ops = {
+ .pte_entry = page_clear_nocache,
+};
+
+void *arch_dma_set_uncached(void *cpu_addr, size_t size)
+{
+ unsigned long va = (unsigned long)cpu_addr;
+ int error;
+
+ /*
+ * We need to iterate through the pages, clearing the dcache for
+ * them and setting the cache-inhibit bit.
+ */
+ mmap_write_lock(&init_mm);
+ error = walk_page_range_novma(&init_mm, va, va + size,
+ &set_nocache_walk_ops, NULL, NULL);
+ mmap_write_unlock(&init_mm);
+
+ if (error)
+ return ERR_PTR(error);
+ return cpu_addr;
+}
+
+void arch_dma_clear_uncached(void *cpu_addr, size_t size)
+{
+ unsigned long va = (unsigned long)cpu_addr;
+
+ mmap_write_lock(&init_mm);
+ /* walk_page_range shouldn't be able to fail here */
+ WARN_ON(walk_page_range_novma(&init_mm, va, va + size,
+ &clear_nocache_walk_ops, NULL, NULL));
+ mmap_write_unlock(&init_mm);
+}
+
+void arch_sync_dma_for_device(phys_addr_t addr, size_t size,
+ enum dma_data_direction dir)
+{
+ unsigned long cl;
+ struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()];
+
+ switch (dir) {
+ case DMA_TO_DEVICE:
+ /* Flush the dcache for the requested range */
+ for (cl = addr; cl < addr + size;
+ cl += cpuinfo->dcache_block_size)
+ mtspr(SPR_DCBFR, cl);
+ break;
+ case DMA_FROM_DEVICE:
+ /* Invalidate the dcache for the requested range */
+ for (cl = addr; cl < addr + size;
+ cl += cpuinfo->dcache_block_size)
+ mtspr(SPR_DCBIR, cl);
+ break;
+ default:
+ /*
+ * NOTE: If dir == DMA_BIDIRECTIONAL then there's no need to
+ * flush nor invalidate the cache here as the area will need
+ * to be manually synced anyway.
+ */
+ break;
+ }
+}
diff --git a/arch/openrisc/kernel/entry.S b/arch/openrisc/kernel/entry.S
new file mode 100644
index 0000000000..c9f48e750b
--- /dev/null
+++ b/arch/openrisc/kernel/entry.S
@@ -0,0 +1,1244 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC entry.S
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2005 Gyorgy Jeney <nog@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#include <linux/linkage.h>
+#include <linux/pgtable.h>
+
+#include <asm/processor.h>
+#include <asm/unistd.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+#include <asm/spr_defs.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/asm-offsets.h>
+
+#define DISABLE_INTERRUPTS(t1,t2) \
+ l.mfspr t2,r0,SPR_SR ;\
+ l.movhi t1,hi(~(SPR_SR_IEE|SPR_SR_TEE)) ;\
+ l.ori t1,t1,lo(~(SPR_SR_IEE|SPR_SR_TEE)) ;\
+ l.and t2,t2,t1 ;\
+ l.mtspr r0,t2,SPR_SR
+
+#define ENABLE_INTERRUPTS(t1) \
+ l.mfspr t1,r0,SPR_SR ;\
+ l.ori t1,t1,lo(SPR_SR_IEE|SPR_SR_TEE) ;\
+ l.mtspr r0,t1,SPR_SR
+
+/* =========================================================[ macros ]=== */
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+/*
+ * Trace irq on/off creating a stack frame.
+ */
+#define TRACE_IRQS_OP(trace_op) \
+ l.sw -8(r1),r2 /* store frame pointer */ ;\
+ l.sw -4(r1),r9 /* store return address */ ;\
+ l.addi r2,r1,0 /* move sp to fp */ ;\
+ l.jal trace_op ;\
+ l.addi r1,r1,-8 ;\
+ l.ori r1,r2,0 /* restore sp */ ;\
+ l.lwz r9,-4(r1) /* restore return address */ ;\
+ l.lwz r2,-8(r1) /* restore fp */ ;\
+/*
+ * Trace irq on/off and save registers we need that would otherwise be
+ * clobbered.
+ */
+#define TRACE_IRQS_SAVE(t1,trace_op) \
+ l.sw -12(r1),t1 /* save extra reg */ ;\
+ l.sw -8(r1),r2 /* store frame pointer */ ;\
+ l.sw -4(r1),r9 /* store return address */ ;\
+ l.addi r2,r1,0 /* move sp to fp */ ;\
+ l.jal trace_op ;\
+ l.addi r1,r1,-12 ;\
+ l.ori r1,r2,0 /* restore sp */ ;\
+ l.lwz r9,-4(r1) /* restore return address */ ;\
+ l.lwz r2,-8(r1) /* restore fp */ ;\
+ l.lwz t1,-12(r1) /* restore extra reg */
+
+#define TRACE_IRQS_OFF TRACE_IRQS_OP(trace_hardirqs_off)
+#define TRACE_IRQS_ON TRACE_IRQS_OP(trace_hardirqs_on)
+#define TRACE_IRQS_ON_SYSCALL \
+ TRACE_IRQS_SAVE(r10,trace_hardirqs_on) ;\
+ l.lwz r3,PT_GPR3(r1) ;\
+ l.lwz r4,PT_GPR4(r1) ;\
+ l.lwz r5,PT_GPR5(r1) ;\
+ l.lwz r6,PT_GPR6(r1) ;\
+ l.lwz r7,PT_GPR7(r1) ;\
+ l.lwz r8,PT_GPR8(r1) ;\
+ l.lwz r11,PT_GPR11(r1)
+#define TRACE_IRQS_OFF_ENTRY \
+ l.lwz r5,PT_SR(r1) ;\
+ l.andi r3,r5,(SPR_SR_IEE|SPR_SR_TEE) ;\
+ l.sfeq r5,r0 /* skip trace if irqs were already off */;\
+ l.bf 1f ;\
+ l.nop ;\
+ TRACE_IRQS_SAVE(r4,trace_hardirqs_off) ;\
+1:
+#else
+#define TRACE_IRQS_OFF
+#define TRACE_IRQS_ON
+#define TRACE_IRQS_OFF_ENTRY
+#define TRACE_IRQS_ON_SYSCALL
+#endif
+
+/*
+ * We need to disable interrupts at beginning of RESTORE_ALL
+ * since interrupt might come in after we've loaded EPC return address
+ * and overwrite EPC with address somewhere in RESTORE_ALL
+ * which is of course wrong!
+ */
+
+#define RESTORE_ALL \
+ DISABLE_INTERRUPTS(r3,r4) ;\
+ l.lwz r3,PT_PC(r1) ;\
+ l.mtspr r0,r3,SPR_EPCR_BASE ;\
+ l.lwz r3,PT_SR(r1) ;\
+ l.mtspr r0,r3,SPR_ESR_BASE ;\
+ l.lwz r3,PT_FPCSR(r1) ;\
+ l.mtspr r0,r3,SPR_FPCSR ;\
+ l.lwz r2,PT_GPR2(r1) ;\
+ l.lwz r3,PT_GPR3(r1) ;\
+ l.lwz r4,PT_GPR4(r1) ;\
+ l.lwz r5,PT_GPR5(r1) ;\
+ l.lwz r6,PT_GPR6(r1) ;\
+ l.lwz r7,PT_GPR7(r1) ;\
+ l.lwz r8,PT_GPR8(r1) ;\
+ l.lwz r9,PT_GPR9(r1) ;\
+ l.lwz r10,PT_GPR10(r1) ;\
+ l.lwz r11,PT_GPR11(r1) ;\
+ l.lwz r12,PT_GPR12(r1) ;\
+ l.lwz r13,PT_GPR13(r1) ;\
+ l.lwz r14,PT_GPR14(r1) ;\
+ l.lwz r15,PT_GPR15(r1) ;\
+ l.lwz r16,PT_GPR16(r1) ;\
+ l.lwz r17,PT_GPR17(r1) ;\
+ l.lwz r18,PT_GPR18(r1) ;\
+ l.lwz r19,PT_GPR19(r1) ;\
+ l.lwz r20,PT_GPR20(r1) ;\
+ l.lwz r21,PT_GPR21(r1) ;\
+ l.lwz r22,PT_GPR22(r1) ;\
+ l.lwz r23,PT_GPR23(r1) ;\
+ l.lwz r24,PT_GPR24(r1) ;\
+ l.lwz r25,PT_GPR25(r1) ;\
+ l.lwz r26,PT_GPR26(r1) ;\
+ l.lwz r27,PT_GPR27(r1) ;\
+ l.lwz r28,PT_GPR28(r1) ;\
+ l.lwz r29,PT_GPR29(r1) ;\
+ l.lwz r30,PT_GPR30(r1) ;\
+ l.lwz r31,PT_GPR31(r1) ;\
+ l.lwz r1,PT_SP(r1) ;\
+ l.rfe
+
+
+#define EXCEPTION_ENTRY(handler) \
+ .global handler ;\
+handler: ;\
+ /* r1, EPCR, ESR a already saved */ ;\
+ l.sw PT_GPR2(r1),r2 ;\
+ l.sw PT_GPR3(r1),r3 ;\
+ /* r4 already save */ ;\
+ l.sw PT_GPR5(r1),r5 ;\
+ l.sw PT_GPR6(r1),r6 ;\
+ l.sw PT_GPR7(r1),r7 ;\
+ l.sw PT_GPR8(r1),r8 ;\
+ l.sw PT_GPR9(r1),r9 ;\
+ /* r10 already saved */ ;\
+ l.sw PT_GPR11(r1),r11 ;\
+ /* r12 already saved */ ;\
+ l.sw PT_GPR13(r1),r13 ;\
+ l.sw PT_GPR14(r1),r14 ;\
+ l.sw PT_GPR15(r1),r15 ;\
+ l.sw PT_GPR16(r1),r16 ;\
+ l.sw PT_GPR17(r1),r17 ;\
+ l.sw PT_GPR18(r1),r18 ;\
+ l.sw PT_GPR19(r1),r19 ;\
+ l.sw PT_GPR20(r1),r20 ;\
+ l.sw PT_GPR21(r1),r21 ;\
+ l.sw PT_GPR22(r1),r22 ;\
+ l.sw PT_GPR23(r1),r23 ;\
+ l.sw PT_GPR24(r1),r24 ;\
+ l.sw PT_GPR25(r1),r25 ;\
+ l.sw PT_GPR26(r1),r26 ;\
+ l.sw PT_GPR27(r1),r27 ;\
+ l.sw PT_GPR28(r1),r28 ;\
+ l.sw PT_GPR29(r1),r29 ;\
+ /* r30 already save */ ;\
+ l.sw PT_GPR31(r1),r31 ;\
+ TRACE_IRQS_OFF_ENTRY ;\
+ l.mfspr r30,r0,SPR_FPCSR ;\
+ l.sw PT_FPCSR(r1),r30 ;\
+ /* Store -1 in orig_gpr11 for non-syscall exceptions */ ;\
+ l.addi r30,r0,-1 ;\
+ l.sw PT_ORIG_GPR11(r1),r30
+
+#define UNHANDLED_EXCEPTION(handler,vector) \
+ .global handler ;\
+handler: ;\
+ /* r1, EPCR, ESR already saved */ ;\
+ l.sw PT_GPR2(r1),r2 ;\
+ l.sw PT_GPR3(r1),r3 ;\
+ l.sw PT_GPR5(r1),r5 ;\
+ l.sw PT_GPR6(r1),r6 ;\
+ l.sw PT_GPR7(r1),r7 ;\
+ l.sw PT_GPR8(r1),r8 ;\
+ l.sw PT_GPR9(r1),r9 ;\
+ /* r10 already saved */ ;\
+ l.sw PT_GPR11(r1),r11 ;\
+ /* r12 already saved */ ;\
+ l.sw PT_GPR13(r1),r13 ;\
+ l.sw PT_GPR14(r1),r14 ;\
+ l.sw PT_GPR15(r1),r15 ;\
+ l.sw PT_GPR16(r1),r16 ;\
+ l.sw PT_GPR17(r1),r17 ;\
+ l.sw PT_GPR18(r1),r18 ;\
+ l.sw PT_GPR19(r1),r19 ;\
+ l.sw PT_GPR20(r1),r20 ;\
+ l.sw PT_GPR21(r1),r21 ;\
+ l.sw PT_GPR22(r1),r22 ;\
+ l.sw PT_GPR23(r1),r23 ;\
+ l.sw PT_GPR24(r1),r24 ;\
+ l.sw PT_GPR25(r1),r25 ;\
+ l.sw PT_GPR26(r1),r26 ;\
+ l.sw PT_GPR27(r1),r27 ;\
+ l.sw PT_GPR28(r1),r28 ;\
+ l.sw PT_GPR29(r1),r29 ;\
+ /* r30 already saved */ ;\
+ l.sw PT_GPR31(r1),r31 ;\
+ /* Store -1 in orig_gpr11 for non-syscall exceptions */ ;\
+ l.addi r30,r0,-1 ;\
+ l.sw PT_ORIG_GPR11(r1),r30 ;\
+ l.mfspr r30,r0,SPR_FPCSR ;\
+ l.sw PT_FPCSR(r1),r30 ;\
+ l.addi r3,r1,0 ;\
+ /* r4 is exception EA */ ;\
+ l.addi r5,r0,vector ;\
+ l.jal unhandled_exception ;\
+ l.nop ;\
+ l.j _ret_from_exception ;\
+ l.nop
+
+/* clobbers 'reg' */
+#define CLEAR_LWA_FLAG(reg) \
+ l.movhi reg,hi(lwa_flag) ;\
+ l.ori reg,reg,lo(lwa_flag) ;\
+ l.sw 0(reg),r0
+/*
+ * NOTE: one should never assume that SPR_EPC, SPR_ESR, SPR_EEAR
+ * contain the same values as when exception we're handling
+ * occured. in fact they never do. if you need them use
+ * values saved on stack (for SPR_EPC, SPR_ESR) or content
+ * of r4 (for SPR_EEAR). for details look at EXCEPTION_HANDLE()
+ * in 'arch/openrisc/kernel/head.S'
+ */
+
+/* =====================================================[ exceptions] === */
+
+/* ---[ 0x100: RESET exception ]----------------------------------------- */
+
+EXCEPTION_ENTRY(_tng_kernel_start)
+ l.jal _start
+ l.andi r0,r0,0
+
+/* ---[ 0x200: BUS exception ]------------------------------------------- */
+
+EXCEPTION_ENTRY(_bus_fault_handler)
+ CLEAR_LWA_FLAG(r3)
+ /* r4: EA of fault (set by EXCEPTION_HANDLE) */
+ l.jal do_bus_fault
+ l.addi r3,r1,0 /* pt_regs */
+
+ l.j _ret_from_exception
+ l.nop
+
+/* ---[ 0x300: Data Page Fault exception ]------------------------------- */
+EXCEPTION_ENTRY(_dtlb_miss_page_fault_handler)
+ CLEAR_LWA_FLAG(r3)
+ l.and r5,r5,r0
+ l.j 1f
+ l.nop
+
+EXCEPTION_ENTRY(_data_page_fault_handler)
+ CLEAR_LWA_FLAG(r3)
+ /* set up parameters for do_page_fault */
+ l.ori r5,r0,0x300 // exception vector
+1:
+ l.addi r3,r1,0 // pt_regs
+ /* r4 set be EXCEPTION_HANDLE */ // effective address of fault
+
+#ifdef CONFIG_OPENRISC_NO_SPR_SR_DSX
+ l.lwz r6,PT_PC(r3) // address of an offending insn
+ l.lwz r6,0(r6) // instruction that caused pf
+
+ l.srli r6,r6,26 // check opcode for jump insn
+ l.sfeqi r6,0 // l.j
+ l.bf 8f
+ l.sfeqi r6,1 // l.jal
+ l.bf 8f
+ l.sfeqi r6,3 // l.bnf
+ l.bf 8f
+ l.sfeqi r6,4 // l.bf
+ l.bf 8f
+ l.sfeqi r6,0x11 // l.jr
+ l.bf 8f
+ l.sfeqi r6,0x12 // l.jalr
+ l.bf 8f
+ l.nop
+
+ l.j 9f
+ l.nop
+
+8: // offending insn is in delay slot
+ l.lwz r6,PT_PC(r3) // address of an offending insn
+ l.addi r6,r6,4
+ l.lwz r6,0(r6) // instruction that caused pf
+ l.srli r6,r6,26 // get opcode
+9: // offending instruction opcode loaded in r6
+
+#else
+
+ l.mfspr r6,r0,SPR_SR // SR
+ l.andi r6,r6,SPR_SR_DSX // check for delay slot exception
+ l.sfne r6,r0 // exception happened in delay slot
+ l.bnf 7f
+ l.lwz r6,PT_PC(r3) // address of an offending insn
+
+ l.addi r6,r6,4 // offending insn is in delay slot
+7:
+ l.lwz r6,0(r6) // instruction that caused pf
+ l.srli r6,r6,26 // check opcode for write access
+#endif
+
+ l.sfgeui r6,0x33 // check opcode for write access
+ l.bnf 1f
+ l.sfleui r6,0x37
+ l.bnf 1f
+ l.ori r6,r0,0x1 // write access
+ l.j 2f
+ l.nop
+1: l.ori r6,r0,0x0 // !write access
+2:
+
+ /* call fault.c handler in openrisc/mm/fault.c */
+ l.jal do_page_fault
+ l.nop
+ l.j _ret_from_exception
+ l.nop
+
+/* ---[ 0x400: Insn Page Fault exception ]------------------------------- */
+EXCEPTION_ENTRY(_itlb_miss_page_fault_handler)
+ CLEAR_LWA_FLAG(r3)
+ l.and r5,r5,r0
+ l.j 1f
+ l.nop
+
+EXCEPTION_ENTRY(_insn_page_fault_handler)
+ CLEAR_LWA_FLAG(r3)
+ /* set up parameters for do_page_fault */
+ l.ori r5,r0,0x400 // exception vector
+1:
+ l.addi r3,r1,0 // pt_regs
+ /* r4 set be EXCEPTION_HANDLE */ // effective address of fault
+ l.ori r6,r0,0x0 // !write access
+
+ /* call fault.c handler in openrisc/mm/fault.c */
+ l.jal do_page_fault
+ l.nop
+ l.j _ret_from_exception
+ l.nop
+
+
+/* ---[ 0x500: Timer exception ]----------------------------------------- */
+
+EXCEPTION_ENTRY(_timer_handler)
+ CLEAR_LWA_FLAG(r3)
+ l.jal timer_interrupt
+ l.addi r3,r1,0 /* pt_regs */
+
+ l.j _ret_from_intr
+ l.nop
+
+/* ---[ 0x600: Alignment exception ]-------------------------------------- */
+
+EXCEPTION_ENTRY(_alignment_handler)
+ CLEAR_LWA_FLAG(r3)
+ /* r4: EA of fault (set by EXCEPTION_HANDLE) */
+ l.jal do_unaligned_access
+ l.addi r3,r1,0 /* pt_regs */
+
+ l.j _ret_from_exception
+ l.nop
+
+#if 0
+EXCEPTION_ENTRY(_alignment_handler)
+// l.mfspr r2,r0,SPR_EEAR_BASE /* Load the effective address */
+ l.addi r2,r4,0
+// l.mfspr r5,r0,SPR_EPCR_BASE /* Load the insn address */
+ l.lwz r5,PT_PC(r1)
+
+ l.lwz r3,0(r5) /* Load insn */
+ l.srli r4,r3,26 /* Shift left to get the insn opcode */
+
+ l.sfeqi r4,0x00 /* Check if the load/store insn is in delay slot */
+ l.bf jmp
+ l.sfeqi r4,0x01
+ l.bf jmp
+ l.sfeqi r4,0x03
+ l.bf jmp
+ l.sfeqi r4,0x04
+ l.bf jmp
+ l.sfeqi r4,0x11
+ l.bf jr
+ l.sfeqi r4,0x12
+ l.bf jr
+ l.nop
+ l.j 1f
+ l.addi r5,r5,4 /* Increment PC to get return insn address */
+
+jmp:
+ l.slli r4,r3,6 /* Get the signed extended jump length */
+ l.srai r4,r4,4
+
+ l.lwz r3,4(r5) /* Load the real load/store insn */
+
+ l.add r5,r5,r4 /* Calculate jump target address */
+
+ l.j 1f
+ l.srli r4,r3,26 /* Shift left to get the insn opcode */
+
+jr:
+ l.slli r4,r3,9 /* Shift to get the reg nb */
+ l.andi r4,r4,0x7c
+
+ l.lwz r3,4(r5) /* Load the real load/store insn */
+
+ l.add r4,r4,r1 /* Load the jump register value from the stack */
+ l.lwz r5,0(r4)
+
+ l.srli r4,r3,26 /* Shift left to get the insn opcode */
+
+
+1:
+// l.mtspr r0,r5,SPR_EPCR_BASE
+ l.sw PT_PC(r1),r5
+
+ l.sfeqi r4,0x26
+ l.bf lhs
+ l.sfeqi r4,0x25
+ l.bf lhz
+ l.sfeqi r4,0x22
+ l.bf lws
+ l.sfeqi r4,0x21
+ l.bf lwz
+ l.sfeqi r4,0x37
+ l.bf sh
+ l.sfeqi r4,0x35
+ l.bf sw
+ l.nop
+
+1: l.j 1b /* I don't know what to do */
+ l.nop
+
+lhs: l.lbs r5,0(r2)
+ l.slli r5,r5,8
+ l.lbz r6,1(r2)
+ l.or r5,r5,r6
+ l.srli r4,r3,19
+ l.andi r4,r4,0x7c
+ l.add r4,r4,r1
+ l.j align_end
+ l.sw 0(r4),r5
+
+lhz: l.lbz r5,0(r2)
+ l.slli r5,r5,8
+ l.lbz r6,1(r2)
+ l.or r5,r5,r6
+ l.srli r4,r3,19
+ l.andi r4,r4,0x7c
+ l.add r4,r4,r1
+ l.j align_end
+ l.sw 0(r4),r5
+
+lws: l.lbs r5,0(r2)
+ l.slli r5,r5,24
+ l.lbz r6,1(r2)
+ l.slli r6,r6,16
+ l.or r5,r5,r6
+ l.lbz r6,2(r2)
+ l.slli r6,r6,8
+ l.or r5,r5,r6
+ l.lbz r6,3(r2)
+ l.or r5,r5,r6
+ l.srli r4,r3,19
+ l.andi r4,r4,0x7c
+ l.add r4,r4,r1
+ l.j align_end
+ l.sw 0(r4),r5
+
+lwz: l.lbz r5,0(r2)
+ l.slli r5,r5,24
+ l.lbz r6,1(r2)
+ l.slli r6,r6,16
+ l.or r5,r5,r6
+ l.lbz r6,2(r2)
+ l.slli r6,r6,8
+ l.or r5,r5,r6
+ l.lbz r6,3(r2)
+ l.or r5,r5,r6
+ l.srli r4,r3,19
+ l.andi r4,r4,0x7c
+ l.add r4,r4,r1
+ l.j align_end
+ l.sw 0(r4),r5
+
+sh:
+ l.srli r4,r3,9
+ l.andi r4,r4,0x7c
+ l.add r4,r4,r1
+ l.lwz r5,0(r4)
+ l.sb 1(r2),r5
+ l.srli r5,r5,8
+ l.j align_end
+ l.sb 0(r2),r5
+
+sw:
+ l.srli r4,r3,9
+ l.andi r4,r4,0x7c
+ l.add r4,r4,r1
+ l.lwz r5,0(r4)
+ l.sb 3(r2),r5
+ l.srli r5,r5,8
+ l.sb 2(r2),r5
+ l.srli r5,r5,8
+ l.sb 1(r2),r5
+ l.srli r5,r5,8
+ l.j align_end
+ l.sb 0(r2),r5
+
+align_end:
+ l.j _ret_from_intr
+ l.nop
+#endif
+
+/* ---[ 0x700: Illegal insn exception ]---------------------------------- */
+
+EXCEPTION_ENTRY(_illegal_instruction_handler)
+ /* r4: EA of fault (set by EXCEPTION_HANDLE) */
+ l.jal do_illegal_instruction
+ l.addi r3,r1,0 /* pt_regs */
+
+ l.j _ret_from_exception
+ l.nop
+
+/* ---[ 0x800: External interrupt exception ]---------------------------- */
+
+EXCEPTION_ENTRY(_external_irq_handler)
+#ifdef CONFIG_OPENRISC_ESR_EXCEPTION_BUG_CHECK
+ l.lwz r4,PT_SR(r1) // were interrupts enabled ?
+ l.andi r4,r4,SPR_SR_IEE
+ l.sfeqi r4,0
+ l.bnf 1f // ext irq enabled, all ok.
+ l.nop
+
+#ifdef CONFIG_PRINTK
+ l.addi r1,r1,-0x8
+ l.movhi r3,hi(42f)
+ l.ori r3,r3,lo(42f)
+ l.sw 0x0(r1),r3
+ l.jal _printk
+ l.sw 0x4(r1),r4
+ l.addi r1,r1,0x8
+
+ .section .rodata, "a"
+42:
+ .string "\n\rESR interrupt bug: in _external_irq_handler (ESR %x)\n\r"
+ .align 4
+ .previous
+#endif
+
+ l.ori r4,r4,SPR_SR_IEE // fix the bug
+// l.sw PT_SR(r1),r4
+1:
+#endif
+ CLEAR_LWA_FLAG(r3)
+ l.addi r3,r1,0
+ l.movhi r8,hi(generic_handle_arch_irq)
+ l.ori r8,r8,lo(generic_handle_arch_irq)
+ l.jalr r8
+ l.nop
+ l.j _ret_from_intr
+ l.nop
+
+/* ---[ 0x900: DTLB miss exception ]------------------------------------- */
+
+
+/* ---[ 0xa00: ITLB miss exception ]------------------------------------- */
+
+
+/* ---[ 0xb00: Range exception ]----------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0xb00,0xb00)
+
+/* ---[ 0xc00: Syscall exception ]--------------------------------------- */
+
+/*
+ * Syscalls are a special type of exception in that they are
+ * _explicitly_ invoked by userspace and can therefore be
+ * held to conform to the same ABI as normal functions with
+ * respect to whether registers are preserved across the call
+ * or not.
+ */
+
+/* Upon syscall entry we just save the callee-saved registers
+ * and not the call-clobbered ones.
+ */
+
+_string_syscall_return:
+ .string "syscall r9:0x%08x -> syscall(%ld) return %ld\0"
+ .align 4
+
+ENTRY(_sys_call_handler)
+ /* r1, EPCR, ESR a already saved */
+ l.sw PT_GPR2(r1),r2
+ /* r3-r8 must be saved because syscall restart relies
+ * on us being able to restart the syscall args... technically
+ * they should be clobbered, otherwise
+ */
+ l.sw PT_GPR3(r1),r3
+ /*
+ * r4 already saved
+ * r4 holds the EEAR address of the fault, use it as screatch reg and
+ * then load the original r4
+ */
+ CLEAR_LWA_FLAG(r4)
+ l.lwz r4,PT_GPR4(r1)
+ l.sw PT_GPR5(r1),r5
+ l.sw PT_GPR6(r1),r6
+ l.sw PT_GPR7(r1),r7
+ l.sw PT_GPR8(r1),r8
+ l.sw PT_GPR9(r1),r9
+ /* r10 already saved */
+ l.sw PT_GPR11(r1),r11
+ /* orig_gpr11 must be set for syscalls */
+ l.sw PT_ORIG_GPR11(r1),r11
+ /* r12,r13 already saved */
+
+ /* r14-r28 (even) aren't touched by the syscall fast path below
+ * so we don't need to save them. However, the functions that return
+ * to userspace via a call to switch() DO need to save these because
+ * switch() effectively clobbers them... saving these registers for
+ * such functions is handled in their syscall wrappers (see fork, vfork,
+ * and clone, below).
+
+ /* r30 is the only register we clobber in the fast path */
+ /* r30 already saved */
+/* l.sw PT_GPR30(r1),r30 */
+
+_syscall_check_trace_enter:
+ /* syscalls run with interrupts enabled */
+ TRACE_IRQS_ON_SYSCALL
+ ENABLE_INTERRUPTS(r29) // enable interrupts, r29 is temp
+
+ /* If TIF_SYSCALL_TRACE is set, then we want to do syscall tracing */
+ l.lwz r30,TI_FLAGS(r10)
+ l.andi r30,r30,_TIF_SYSCALL_TRACE
+ l.sfne r30,r0
+ l.bf _syscall_trace_enter
+ l.nop
+
+_syscall_check:
+ /* Ensure that the syscall number is reasonable */
+ l.sfgeui r11,__NR_syscalls
+ l.bf _syscall_badsys
+ l.nop
+
+_syscall_call:
+ l.movhi r29,hi(sys_call_table)
+ l.ori r29,r29,lo(sys_call_table)
+ l.slli r11,r11,2
+ l.add r29,r29,r11
+ l.lwz r29,0(r29)
+
+ l.jalr r29
+ l.nop
+
+_syscall_return:
+ /* All syscalls return here... just pay attention to ret_from_fork
+ * which does it in a round-about way.
+ */
+ l.sw PT_GPR11(r1),r11 // save return value
+
+#if 0
+_syscall_debug:
+ l.movhi r3,hi(_string_syscall_return)
+ l.ori r3,r3,lo(_string_syscall_return)
+ l.ori r27,r0,2
+ l.sw -4(r1),r27
+ l.sw -8(r1),r11
+ l.lwz r29,PT_ORIG_GPR11(r1)
+ l.sw -12(r1),r29
+ l.lwz r29,PT_GPR9(r1)
+ l.sw -16(r1),r29
+ l.movhi r27,hi(_printk)
+ l.ori r27,r27,lo(_printk)
+ l.jalr r27
+ l.addi r1,r1,-16
+ l.addi r1,r1,16
+#endif
+#if 0
+_syscall_show_regs:
+ l.movhi r27,hi(show_registers)
+ l.ori r27,r27,lo(show_registers)
+ l.jalr r27
+ l.or r3,r1,r1
+#endif
+
+_syscall_check_trace_leave:
+ /* r30 is a callee-saved register so this should still hold the
+ * _TIF_SYSCALL_TRACE flag from _syscall_check_trace_enter above...
+ * _syscall_trace_leave expects syscall result to be in pt_regs->r11.
+ */
+ l.sfne r30,r0
+ l.bf _syscall_trace_leave
+ l.nop
+
+/* This is where the exception-return code begins... interrupts need to be
+ * disabled the rest of the way here because we can't afford to miss any
+ * interrupts that set NEED_RESCHED or SIGNALPENDING... really true? */
+
+_syscall_check_work:
+ /* Here we need to disable interrupts */
+ DISABLE_INTERRUPTS(r27,r29)
+ TRACE_IRQS_OFF
+ l.lwz r30,TI_FLAGS(r10)
+ l.andi r30,r30,_TIF_WORK_MASK
+ l.sfne r30,r0
+
+ l.bnf _syscall_resume_userspace
+ l.nop
+
+ /* Work pending follows a different return path, so we need to
+ * make sure that all the call-saved registers get into pt_regs
+ * before branching...
+ */
+ l.sw PT_GPR14(r1),r14
+ l.sw PT_GPR16(r1),r16
+ l.sw PT_GPR18(r1),r18
+ l.sw PT_GPR20(r1),r20
+ l.sw PT_GPR22(r1),r22
+ l.sw PT_GPR24(r1),r24
+ l.sw PT_GPR26(r1),r26
+ l.sw PT_GPR28(r1),r28
+
+ /* _work_pending needs to be called with interrupts disabled */
+ l.j _work_pending
+ l.nop
+
+_syscall_resume_userspace:
+// ENABLE_INTERRUPTS(r29)
+
+
+/* This is the hot path for returning to userspace from a syscall. If there's
+ * work to be done and the branch to _work_pending was taken above, then the
+ * return to userspace will be done via the normal exception return path...
+ * that path restores _all_ registers and will overwrite the "clobbered"
+ * registers with whatever garbage is in pt_regs -- that's OK because those
+ * registers are clobbered anyway and because the extra work is insignificant
+ * in the context of the extra work that _work_pending is doing.
+
+/* Once again, syscalls are special and only guarantee to preserve the
+ * same registers as a normal function call */
+
+/* The assumption here is that the registers r14-r28 (even) are untouched and
+ * don't need to be restored... be sure that that's really the case!
+ */
+
+/* This is still too much... we should only be restoring what we actually
+ * clobbered... we should even be using 'scratch' (odd) regs above so that
+ * we don't need to restore anything, hardly...
+ */
+
+ l.lwz r2,PT_GPR2(r1)
+
+ /* Restore args */
+ /* r3-r8 are technically clobbered, but syscall restart needs these
+ * to be restored...
+ */
+ l.lwz r3,PT_GPR3(r1)
+ l.lwz r4,PT_GPR4(r1)
+ l.lwz r5,PT_GPR5(r1)
+ l.lwz r6,PT_GPR6(r1)
+ l.lwz r7,PT_GPR7(r1)
+ l.lwz r8,PT_GPR8(r1)
+
+ l.lwz r9,PT_GPR9(r1)
+ l.lwz r10,PT_GPR10(r1)
+ l.lwz r11,PT_GPR11(r1)
+
+ /* r30 is the only register we clobber in the fast path */
+ l.lwz r30,PT_GPR30(r1)
+
+ /* Here we use r13-r19 (odd) as scratch regs */
+ l.lwz r13,PT_PC(r1)
+ l.lwz r15,PT_SR(r1)
+ l.lwz r1,PT_SP(r1)
+ /* Interrupts need to be disabled for setting EPCR and ESR
+ * so that another interrupt doesn't come in here and clobber
+ * them before we can use them for our l.rfe */
+ DISABLE_INTERRUPTS(r17,r19)
+ l.mtspr r0,r13,SPR_EPCR_BASE
+ l.mtspr r0,r15,SPR_ESR_BASE
+ l.rfe
+
+/* End of hot path!
+ * Keep the below tracing and error handling out of the hot path...
+*/
+
+_syscall_trace_enter:
+ /* Here we pass pt_regs to do_syscall_trace_enter. Make sure
+ * that function is really getting all the info it needs as
+ * pt_regs isn't a complete set of userspace regs, just the
+ * ones relevant to the syscall...
+ *
+ * Note use of delay slot for setting argument.
+ */
+ l.jal do_syscall_trace_enter
+ l.addi r3,r1,0
+
+ /* Restore arguments (not preserved across do_syscall_trace_enter)
+ * so that we can do the syscall for real and return to the syscall
+ * hot path.
+ */
+ l.lwz r11,PT_GPR11(r1)
+ l.lwz r3,PT_GPR3(r1)
+ l.lwz r4,PT_GPR4(r1)
+ l.lwz r5,PT_GPR5(r1)
+ l.lwz r6,PT_GPR6(r1)
+ l.lwz r7,PT_GPR7(r1)
+
+ l.j _syscall_check
+ l.lwz r8,PT_GPR8(r1)
+
+_syscall_trace_leave:
+ l.jal do_syscall_trace_leave
+ l.addi r3,r1,0
+
+ l.j _syscall_check_work
+ l.nop
+
+_syscall_badsys:
+ /* Here we effectively pretend to have executed an imaginary
+ * syscall that returns -ENOSYS and then return to the regular
+ * syscall hot path.
+ * Note that "return value" is set in the delay slot...
+ */
+ l.j _syscall_return
+ l.addi r11,r0,-ENOSYS
+
+/******* END SYSCALL HANDLING *******/
+
+/* ---[ 0xd00: Floating Point exception ]-------------------------------- */
+
+EXCEPTION_ENTRY(_fpe_trap_handler)
+ CLEAR_LWA_FLAG(r3)
+ /* r4: EA of fault (set by EXCEPTION_HANDLE) */
+ l.jal do_fpe_trap
+ l.addi r3,r1,0 /* pt_regs */
+
+ l.j _ret_from_exception
+ l.nop
+
+/* ---[ 0xe00: Trap exception ]------------------------------------------ */
+
+EXCEPTION_ENTRY(_trap_handler)
+ CLEAR_LWA_FLAG(r3)
+ /* r4: EA of fault (set by EXCEPTION_HANDLE) */
+ l.jal do_trap
+ l.addi r3,r1,0 /* pt_regs */
+
+ l.j _ret_from_exception
+ l.nop
+
+/* ---[ 0xf00: Reserved exception ]-------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0xf00,0xf00)
+
+/* ---[ 0x1000: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1000,0x1000)
+
+/* ---[ 0x1100: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1100,0x1100)
+
+/* ---[ 0x1200: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1200,0x1200)
+
+/* ---[ 0x1300: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1300,0x1300)
+
+/* ---[ 0x1400: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1400,0x1400)
+
+/* ---[ 0x1500: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1500,0x1500)
+
+/* ---[ 0x1600: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1600,0x1600)
+
+/* ---[ 0x1700: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1700,0x1700)
+
+/* ---[ 0x1800: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1800,0x1800)
+
+/* ---[ 0x1900: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1900,0x1900)
+
+/* ---[ 0x1a00: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1a00,0x1a00)
+
+/* ---[ 0x1b00: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1b00,0x1b00)
+
+/* ---[ 0x1c00: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1c00,0x1c00)
+
+/* ---[ 0x1d00: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1d00,0x1d00)
+
+/* ---[ 0x1e00: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1e00,0x1e00)
+
+/* ---[ 0x1f00: Reserved exception ]------------------------------------- */
+
+UNHANDLED_EXCEPTION(_vector_0x1f00,0x1f00)
+
+/* ========================================================[ return ] === */
+
+_resume_userspace:
+ DISABLE_INTERRUPTS(r3,r4)
+ TRACE_IRQS_OFF
+ l.lwz r4,TI_FLAGS(r10)
+ l.andi r13,r4,_TIF_WORK_MASK
+ l.sfeqi r13,0
+ l.bf _restore_all
+ l.nop
+
+_work_pending:
+ l.lwz r5,PT_ORIG_GPR11(r1)
+ l.sfltsi r5,0
+ l.bnf 1f
+ l.nop
+ l.andi r5,r5,0
+1:
+ l.jal do_work_pending
+ l.ori r3,r1,0 /* pt_regs */
+
+ l.sfeqi r11,0
+ l.bf _restore_all
+ l.nop
+ l.sfltsi r11,0
+ l.bnf 1f
+ l.nop
+ l.and r11,r11,r0
+ l.ori r11,r11,__NR_restart_syscall
+ l.j _syscall_check_trace_enter
+ l.nop
+1:
+ l.lwz r11,PT_ORIG_GPR11(r1)
+ /* Restore arg registers */
+ l.lwz r3,PT_GPR3(r1)
+ l.lwz r4,PT_GPR4(r1)
+ l.lwz r5,PT_GPR5(r1)
+ l.lwz r6,PT_GPR6(r1)
+ l.lwz r7,PT_GPR7(r1)
+ l.j _syscall_check_trace_enter
+ l.lwz r8,PT_GPR8(r1)
+
+_restore_all:
+#ifdef CONFIG_TRACE_IRQFLAGS
+ l.lwz r4,PT_SR(r1)
+ l.andi r3,r4,(SPR_SR_IEE|SPR_SR_TEE)
+ l.sfeq r3,r0 /* skip trace if irqs were off */
+ l.bf skip_hardirqs_on
+ l.nop
+ TRACE_IRQS_ON
+skip_hardirqs_on:
+#endif
+ RESTORE_ALL
+ /* This returns to userspace code */
+
+
+ENTRY(_ret_from_intr)
+ENTRY(_ret_from_exception)
+ l.lwz r4,PT_SR(r1)
+ l.andi r3,r4,SPR_SR_SM
+ l.sfeqi r3,0
+ l.bnf _restore_all
+ l.nop
+ l.j _resume_userspace
+ l.nop
+
+ENTRY(ret_from_fork)
+ l.jal schedule_tail
+ l.nop
+
+ /* Check if we are a kernel thread */
+ l.sfeqi r20,0
+ l.bf 1f
+ l.nop
+
+ /* ...we are a kernel thread so invoke the requested callback */
+ l.jalr r20
+ l.or r3,r22,r0
+
+1:
+ /* _syscall_returns expect r11 to contain return value */
+ l.lwz r11,PT_GPR11(r1)
+
+ /* The syscall fast path return expects call-saved registers
+ * r14-r28 to be untouched, so we restore them here as they
+ * will have been effectively clobbered when arriving here
+ * via the call to switch()
+ */
+ l.lwz r14,PT_GPR14(r1)
+ l.lwz r16,PT_GPR16(r1)
+ l.lwz r18,PT_GPR18(r1)
+ l.lwz r20,PT_GPR20(r1)
+ l.lwz r22,PT_GPR22(r1)
+ l.lwz r24,PT_GPR24(r1)
+ l.lwz r26,PT_GPR26(r1)
+ l.lwz r28,PT_GPR28(r1)
+
+ l.j _syscall_return
+ l.nop
+
+/* ========================================================[ switch ] === */
+
+/*
+ * This routine switches between two different tasks. The process
+ * state of one is saved on its kernel stack. Then the state
+ * of the other is restored from its kernel stack. The memory
+ * management hardware is updated to the second process's state.
+ * Finally, we can return to the second process, via the 'return'.
+ *
+ * Note: there are two ways to get to the "going out" portion
+ * of this code; either by coming in via the entry (_switch)
+ * or via "fork" which must set up an environment equivalent
+ * to the "_switch" path. If you change this (or in particular, the
+ * SAVE_REGS macro), you'll have to change the fork code also.
+ */
+
+
+/* _switch MUST never lay on page boundry, cause it runs from
+ * effective addresses and beeing interrupted by iTLB miss would kill it.
+ * dTLB miss seems to never accour in the bad place since data accesses
+ * are from task structures which are always page aligned.
+ *
+ * The problem happens in RESTORE_ALL where we first set the EPCR
+ * register, then load the previous register values and only at the end call
+ * the l.rfe instruction. If get TLB miss in beetwen the EPCR register gets
+ * garbled and we end up calling l.rfe with the wrong EPCR. (same probably
+ * holds for ESR)
+ *
+ * To avoid this problems it is sufficient to align _switch to
+ * some nice round number smaller than it's size...
+ */
+
+/* ABI rules apply here... we either enter _switch via schedule() or via
+ * an imaginary call to which we shall return at return_from_fork. Either
+ * way, we are a function call and only need to preserve the callee-saved
+ * registers when we return. As such, we don't need to save the registers
+ * on the stack that we won't be returning as they were...
+ */
+
+ .align 0x400
+ENTRY(_switch)
+ /* We don't store SR as _switch only gets called in a context where
+ * the SR will be the same going in and coming out... */
+
+ /* Set up new pt_regs struct for saving task state */
+ l.addi r1,r1,-(INT_FRAME_SIZE)
+
+ /* No need to store r1/PT_SP as it goes into KSP below */
+ l.sw PT_GPR2(r1),r2
+ l.sw PT_GPR9(r1),r9
+
+ /* Save callee-saved registers to the new pt_regs */
+ l.sw PT_GPR14(r1),r14
+ l.sw PT_GPR16(r1),r16
+ l.sw PT_GPR18(r1),r18
+ l.sw PT_GPR20(r1),r20
+ l.sw PT_GPR22(r1),r22
+ l.sw PT_GPR24(r1),r24
+ l.sw PT_GPR26(r1),r26
+ l.sw PT_GPR28(r1),r28
+ l.sw PT_GPR30(r1),r30
+
+ /* Store the old FPU state to new pt_regs */
+ l.mfspr r29,r0,SPR_FPCSR
+ l.sw PT_FPCSR(r1),r29
+
+ l.addi r11,r10,0 /* Save old 'current' to 'last' return value*/
+
+ /* We use thread_info->ksp for storing the address of the above
+ * structure so that we can get back to it later... we don't want
+ * to lose the value of thread_info->ksp, though, so store it as
+ * pt_regs->sp so that we can easily restore it when we are made
+ * live again...
+ */
+
+ /* Save the old value of thread_info->ksp as pt_regs->sp */
+ l.lwz r29,TI_KSP(r10)
+ l.sw PT_SP(r1),r29
+
+ /* Swap kernel stack pointers */
+ l.sw TI_KSP(r10),r1 /* Save old stack pointer */
+ l.or r10,r4,r0 /* Set up new current_thread_info */
+ l.lwz r1,TI_KSP(r10) /* Load new stack pointer */
+
+ /* Restore the old value of thread_info->ksp */
+ l.lwz r29,PT_SP(r1)
+ l.sw TI_KSP(r10),r29
+
+ /* Restore the old value of FPCSR */
+ l.lwz r29,PT_FPCSR(r1)
+ l.mtspr r0,r29,SPR_FPCSR
+
+ /* ...and restore the registers, except r11 because the return value
+ * has already been set above.
+ */
+ l.lwz r2,PT_GPR2(r1)
+ l.lwz r9,PT_GPR9(r1)
+ /* No need to restore r10 */
+ /* ...and do not restore r11 */
+
+ /* Restore callee-saved registers */
+ l.lwz r14,PT_GPR14(r1)
+ l.lwz r16,PT_GPR16(r1)
+ l.lwz r18,PT_GPR18(r1)
+ l.lwz r20,PT_GPR20(r1)
+ l.lwz r22,PT_GPR22(r1)
+ l.lwz r24,PT_GPR24(r1)
+ l.lwz r26,PT_GPR26(r1)
+ l.lwz r28,PT_GPR28(r1)
+ l.lwz r30,PT_GPR30(r1)
+
+ /* Unwind stack to pre-switch state */
+ l.addi r1,r1,(INT_FRAME_SIZE)
+
+ /* Return via the link-register back to where we 'came from', where
+ * that may be either schedule(), ret_from_fork(), or
+ * ret_from_kernel_thread(). If we are returning to a new thread,
+ * we are expected to have set up the arg to schedule_tail already,
+ * hence we do so here unconditionally:
+ */
+ l.lwz r3,TI_TASK(r3) /* Load 'prev' as schedule_tail arg */
+ l.jr r9
+ l.nop
+
+/* ==================================================================== */
+
+/* These all use the delay slot for setting the argument register, so the
+ * jump is always happening after the l.addi instruction.
+ *
+ * These are all just wrappers that don't touch the link-register r9, so the
+ * return from the "real" syscall function will return back to the syscall
+ * code that did the l.jal that brought us here.
+ */
+
+/* fork requires that we save all the callee-saved registers because they
+ * are all effectively clobbered by the call to _switch. Here we store
+ * all the registers that aren't touched by the syscall fast path and thus
+ * weren't saved there.
+ */
+
+_fork_save_extra_regs_and_call:
+ l.sw PT_GPR14(r1),r14
+ l.sw PT_GPR16(r1),r16
+ l.sw PT_GPR18(r1),r18
+ l.sw PT_GPR20(r1),r20
+ l.sw PT_GPR22(r1),r22
+ l.sw PT_GPR24(r1),r24
+ l.sw PT_GPR26(r1),r26
+ l.jr r29
+ l.sw PT_GPR28(r1),r28
+
+ENTRY(__sys_clone)
+ l.movhi r29,hi(sys_clone)
+ l.j _fork_save_extra_regs_and_call
+ l.ori r29,r29,lo(sys_clone)
+
+ENTRY(__sys_clone3)
+ l.movhi r29,hi(sys_clone3)
+ l.j _fork_save_extra_regs_and_call
+ l.ori r29,r29,lo(sys_clone3)
+
+ENTRY(__sys_fork)
+ l.movhi r29,hi(sys_fork)
+ l.j _fork_save_extra_regs_and_call
+ l.ori r29,r29,lo(sys_fork)
+
+ENTRY(sys_rt_sigreturn)
+ l.jal _sys_rt_sigreturn
+ l.addi r3,r1,0
+ l.sfne r30,r0
+ l.bnf _no_syscall_trace
+ l.nop
+ l.jal do_syscall_trace_leave
+ l.addi r3,r1,0
+_no_syscall_trace:
+ l.j _resume_userspace
+ l.nop
+
+/* This is a catch-all syscall for atomic instructions for the OpenRISC 1000.
+ * The functions takes a variable number of parameters depending on which
+ * particular flavour of atomic you want... parameter 1 is a flag identifying
+ * the atomic in question. Currently, this function implements the
+ * following variants:
+ *
+ * XCHG:
+ * @flag: 1
+ * @ptr1:
+ * @ptr2:
+ * Atomically exchange the values in pointers 1 and 2.
+ *
+ */
+
+ENTRY(sys_or1k_atomic)
+ /* FIXME: This ignores r3 and always does an XCHG */
+ DISABLE_INTERRUPTS(r17,r19)
+ l.lwz r29,0(r4)
+ l.lwz r27,0(r5)
+ l.sw 0(r4),r27
+ l.sw 0(r5),r29
+ ENABLE_INTERRUPTS(r17)
+ l.jr r9
+ l.or r11,r0,r0
+
+/* ============================================================[ EOF ]=== */
diff --git a/arch/openrisc/kernel/head.S b/arch/openrisc/kernel/head.S
new file mode 100644
index 0000000000..439e00f81e
--- /dev/null
+++ b/arch/openrisc/kernel/head.S
@@ -0,0 +1,1577 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC head.S
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#include <linux/linkage.h>
+#include <linux/threads.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/serial_reg.h>
+#include <linux/pgtable.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/thread_info.h>
+#include <asm/cache.h>
+#include <asm/spr_defs.h>
+#include <asm/asm-offsets.h>
+#include <linux/of_fdt.h>
+
+#define tophys(rd,rs) \
+ l.movhi rd,hi(-KERNELBASE) ;\
+ l.add rd,rd,rs
+
+#define CLEAR_GPR(gpr) \
+ l.movhi gpr,0x0
+
+#define LOAD_SYMBOL_2_GPR(gpr,symbol) \
+ l.movhi gpr,hi(symbol) ;\
+ l.ori gpr,gpr,lo(symbol)
+
+
+#define UART_BASE_ADD 0x90000000
+
+#define EXCEPTION_SR (SPR_SR_DME | SPR_SR_IME | SPR_SR_DCE | SPR_SR_ICE | SPR_SR_SM)
+#define SYSCALL_SR (SPR_SR_DME | SPR_SR_IME | SPR_SR_DCE | SPR_SR_ICE | SPR_SR_IEE | SPR_SR_TEE | SPR_SR_SM)
+
+/* ============================================[ tmp store locations ]=== */
+
+#define SPR_SHADOW_GPR(x) ((x) + SPR_GPR_BASE + 32)
+
+/*
+ * emergency_print temporary stores
+ */
+#ifdef CONFIG_OPENRISC_HAVE_SHADOW_GPRS
+#define EMERGENCY_PRINT_STORE_GPR4 l.mtspr r0,r4,SPR_SHADOW_GPR(14)
+#define EMERGENCY_PRINT_LOAD_GPR4 l.mfspr r4,r0,SPR_SHADOW_GPR(14)
+
+#define EMERGENCY_PRINT_STORE_GPR5 l.mtspr r0,r5,SPR_SHADOW_GPR(15)
+#define EMERGENCY_PRINT_LOAD_GPR5 l.mfspr r5,r0,SPR_SHADOW_GPR(15)
+
+#define EMERGENCY_PRINT_STORE_GPR6 l.mtspr r0,r6,SPR_SHADOW_GPR(16)
+#define EMERGENCY_PRINT_LOAD_GPR6 l.mfspr r6,r0,SPR_SHADOW_GPR(16)
+
+#define EMERGENCY_PRINT_STORE_GPR7 l.mtspr r0,r7,SPR_SHADOW_GPR(7)
+#define EMERGENCY_PRINT_LOAD_GPR7 l.mfspr r7,r0,SPR_SHADOW_GPR(7)
+
+#define EMERGENCY_PRINT_STORE_GPR8 l.mtspr r0,r8,SPR_SHADOW_GPR(8)
+#define EMERGENCY_PRINT_LOAD_GPR8 l.mfspr r8,r0,SPR_SHADOW_GPR(8)
+
+#define EMERGENCY_PRINT_STORE_GPR9 l.mtspr r0,r9,SPR_SHADOW_GPR(9)
+#define EMERGENCY_PRINT_LOAD_GPR9 l.mfspr r9,r0,SPR_SHADOW_GPR(9)
+
+#else /* !CONFIG_OPENRISC_HAVE_SHADOW_GPRS */
+#define EMERGENCY_PRINT_STORE_GPR4 l.sw 0x20(r0),r4
+#define EMERGENCY_PRINT_LOAD_GPR4 l.lwz r4,0x20(r0)
+
+#define EMERGENCY_PRINT_STORE_GPR5 l.sw 0x24(r0),r5
+#define EMERGENCY_PRINT_LOAD_GPR5 l.lwz r5,0x24(r0)
+
+#define EMERGENCY_PRINT_STORE_GPR6 l.sw 0x28(r0),r6
+#define EMERGENCY_PRINT_LOAD_GPR6 l.lwz r6,0x28(r0)
+
+#define EMERGENCY_PRINT_STORE_GPR7 l.sw 0x2c(r0),r7
+#define EMERGENCY_PRINT_LOAD_GPR7 l.lwz r7,0x2c(r0)
+
+#define EMERGENCY_PRINT_STORE_GPR8 l.sw 0x30(r0),r8
+#define EMERGENCY_PRINT_LOAD_GPR8 l.lwz r8,0x30(r0)
+
+#define EMERGENCY_PRINT_STORE_GPR9 l.sw 0x34(r0),r9
+#define EMERGENCY_PRINT_LOAD_GPR9 l.lwz r9,0x34(r0)
+
+#endif
+
+/*
+ * TLB miss handlers temorary stores
+ */
+#ifdef CONFIG_OPENRISC_HAVE_SHADOW_GPRS
+#define EXCEPTION_STORE_GPR2 l.mtspr r0,r2,SPR_SHADOW_GPR(2)
+#define EXCEPTION_LOAD_GPR2 l.mfspr r2,r0,SPR_SHADOW_GPR(2)
+
+#define EXCEPTION_STORE_GPR3 l.mtspr r0,r3,SPR_SHADOW_GPR(3)
+#define EXCEPTION_LOAD_GPR3 l.mfspr r3,r0,SPR_SHADOW_GPR(3)
+
+#define EXCEPTION_STORE_GPR4 l.mtspr r0,r4,SPR_SHADOW_GPR(4)
+#define EXCEPTION_LOAD_GPR4 l.mfspr r4,r0,SPR_SHADOW_GPR(4)
+
+#define EXCEPTION_STORE_GPR5 l.mtspr r0,r5,SPR_SHADOW_GPR(5)
+#define EXCEPTION_LOAD_GPR5 l.mfspr r5,r0,SPR_SHADOW_GPR(5)
+
+#define EXCEPTION_STORE_GPR6 l.mtspr r0,r6,SPR_SHADOW_GPR(6)
+#define EXCEPTION_LOAD_GPR6 l.mfspr r6,r0,SPR_SHADOW_GPR(6)
+
+#else /* !CONFIG_OPENRISC_HAVE_SHADOW_GPRS */
+#define EXCEPTION_STORE_GPR2 l.sw 0x64(r0),r2
+#define EXCEPTION_LOAD_GPR2 l.lwz r2,0x64(r0)
+
+#define EXCEPTION_STORE_GPR3 l.sw 0x68(r0),r3
+#define EXCEPTION_LOAD_GPR3 l.lwz r3,0x68(r0)
+
+#define EXCEPTION_STORE_GPR4 l.sw 0x6c(r0),r4
+#define EXCEPTION_LOAD_GPR4 l.lwz r4,0x6c(r0)
+
+#define EXCEPTION_STORE_GPR5 l.sw 0x70(r0),r5
+#define EXCEPTION_LOAD_GPR5 l.lwz r5,0x70(r0)
+
+#define EXCEPTION_STORE_GPR6 l.sw 0x74(r0),r6
+#define EXCEPTION_LOAD_GPR6 l.lwz r6,0x74(r0)
+
+#endif
+
+/*
+ * EXCEPTION_HANDLE temporary stores
+ */
+
+#ifdef CONFIG_OPENRISC_HAVE_SHADOW_GPRS
+#define EXCEPTION_T_STORE_GPR30 l.mtspr r0,r30,SPR_SHADOW_GPR(30)
+#define EXCEPTION_T_LOAD_GPR30(reg) l.mfspr reg,r0,SPR_SHADOW_GPR(30)
+
+#define EXCEPTION_T_STORE_GPR10 l.mtspr r0,r10,SPR_SHADOW_GPR(10)
+#define EXCEPTION_T_LOAD_GPR10(reg) l.mfspr reg,r0,SPR_SHADOW_GPR(10)
+
+#define EXCEPTION_T_STORE_SP l.mtspr r0,r1,SPR_SHADOW_GPR(1)
+#define EXCEPTION_T_LOAD_SP(reg) l.mfspr reg,r0,SPR_SHADOW_GPR(1)
+
+#else /* !CONFIG_OPENRISC_HAVE_SHADOW_GPRS */
+#define EXCEPTION_T_STORE_GPR30 l.sw 0x78(r0),r30
+#define EXCEPTION_T_LOAD_GPR30(reg) l.lwz reg,0x78(r0)
+
+#define EXCEPTION_T_STORE_GPR10 l.sw 0x7c(r0),r10
+#define EXCEPTION_T_LOAD_GPR10(reg) l.lwz reg,0x7c(r0)
+
+#define EXCEPTION_T_STORE_SP l.sw 0x80(r0),r1
+#define EXCEPTION_T_LOAD_SP(reg) l.lwz reg,0x80(r0)
+#endif
+
+/* =========================================================[ macros ]=== */
+
+#ifdef CONFIG_SMP
+#define GET_CURRENT_PGD(reg,t1) \
+ LOAD_SYMBOL_2_GPR(reg,current_pgd) ;\
+ l.mfspr t1,r0,SPR_COREID ;\
+ l.slli t1,t1,2 ;\
+ l.add reg,reg,t1 ;\
+ tophys (t1,reg) ;\
+ l.lwz reg,0(t1)
+#else
+#define GET_CURRENT_PGD(reg,t1) \
+ LOAD_SYMBOL_2_GPR(reg,current_pgd) ;\
+ tophys (t1,reg) ;\
+ l.lwz reg,0(t1)
+#endif
+
+/* Load r10 from current_thread_info_set - clobbers r1 and r30 */
+#ifdef CONFIG_SMP
+#define GET_CURRENT_THREAD_INFO \
+ LOAD_SYMBOL_2_GPR(r1,current_thread_info_set) ;\
+ tophys (r30,r1) ;\
+ l.mfspr r10,r0,SPR_COREID ;\
+ l.slli r10,r10,2 ;\
+ l.add r30,r30,r10 ;\
+ /* r10: current_thread_info */ ;\
+ l.lwz r10,0(r30)
+#else
+#define GET_CURRENT_THREAD_INFO \
+ LOAD_SYMBOL_2_GPR(r1,current_thread_info_set) ;\
+ tophys (r30,r1) ;\
+ /* r10: current_thread_info */ ;\
+ l.lwz r10,0(r30)
+#endif
+
+/*
+ * DSCR: this is a common hook for handling exceptions. it will save
+ * the needed registers, set up stack and pointer to current
+ * then jump to the handler while enabling MMU
+ *
+ * PRMS: handler - a function to jump to. it has to save the
+ * remaining registers to kernel stack, call
+ * appropriate arch-independant exception handler
+ * and finaly jump to ret_from_except
+ *
+ * PREQ: unchanged state from the time exception happened
+ *
+ * POST: SAVED the following registers original value
+ * to the new created exception frame pointed to by r1
+ *
+ * r1 - ksp pointing to the new (exception) frame
+ * r4 - EEAR exception EA
+ * r10 - current pointing to current_thread_info struct
+ * r12 - syscall 0, since we didn't come from syscall
+ * r30 - handler address of the handler we'll jump to
+ *
+ * handler has to save remaining registers to the exception
+ * ksp frame *before* tainting them!
+ *
+ * NOTE: this function is not reentrant per se. reentrancy is guaranteed
+ * by processor disabling all exceptions/interrupts when exception
+ * accours.
+ *
+ * OPTM: no need to make it so wasteful to extract ksp when in user mode
+ */
+
+#define EXCEPTION_HANDLE(handler) \
+ EXCEPTION_T_STORE_GPR30 ;\
+ l.mfspr r30,r0,SPR_ESR_BASE ;\
+ l.andi r30,r30,SPR_SR_SM ;\
+ l.sfeqi r30,0 ;\
+ EXCEPTION_T_STORE_GPR10 ;\
+ l.bnf 2f /* kernel_mode */ ;\
+ EXCEPTION_T_STORE_SP /* delay slot */ ;\
+1: /* user_mode: */ ;\
+ GET_CURRENT_THREAD_INFO ;\
+ tophys (r30,r10) ;\
+ l.lwz r1,(TI_KSP)(r30) ;\
+ /* fall through */ ;\
+2: /* kernel_mode: */ ;\
+ /* create new stack frame, save only needed gprs */ ;\
+ /* r1: KSP, r10: current, r4: EEAR, r31: __pa(KSP) */ ;\
+ /* r12: temp, syscall indicator */ ;\
+ l.addi r1,r1,-(INT_FRAME_SIZE) ;\
+ /* r1 is KSP, r30 is __pa(KSP) */ ;\
+ tophys (r30,r1) ;\
+ l.sw PT_GPR12(r30),r12 ;\
+ /* r4 use for tmp before EA */ ;\
+ l.mfspr r12,r0,SPR_EPCR_BASE ;\
+ l.sw PT_PC(r30),r12 ;\
+ l.mfspr r12,r0,SPR_ESR_BASE ;\
+ l.sw PT_SR(r30),r12 ;\
+ /* save r30 */ ;\
+ EXCEPTION_T_LOAD_GPR30(r12) ;\
+ l.sw PT_GPR30(r30),r12 ;\
+ /* save r10 as was prior to exception */ ;\
+ EXCEPTION_T_LOAD_GPR10(r12) ;\
+ l.sw PT_GPR10(r30),r12 ;\
+ /* save PT_SP as was prior to exception */ ;\
+ EXCEPTION_T_LOAD_SP(r12) ;\
+ l.sw PT_SP(r30),r12 ;\
+ /* save exception r4, set r4 = EA */ ;\
+ l.sw PT_GPR4(r30),r4 ;\
+ l.mfspr r4,r0,SPR_EEAR_BASE ;\
+ /* r12 == 1 if we come from syscall */ ;\
+ CLEAR_GPR(r12) ;\
+ /* ----- turn on MMU ----- */ ;\
+ /* Carry DSX into exception SR */ ;\
+ l.mfspr r30,r0,SPR_SR ;\
+ l.andi r30,r30,SPR_SR_DSX ;\
+ l.ori r30,r30,(EXCEPTION_SR) ;\
+ l.mtspr r0,r30,SPR_ESR_BASE ;\
+ /* r30: EA address of handler */ ;\
+ LOAD_SYMBOL_2_GPR(r30,handler) ;\
+ l.mtspr r0,r30,SPR_EPCR_BASE ;\
+ l.rfe
+
+/*
+ * this doesn't work
+ *
+ *
+ * #ifdef CONFIG_JUMP_UPON_UNHANDLED_EXCEPTION
+ * #define UNHANDLED_EXCEPTION(handler) \
+ * l.ori r3,r0,0x1 ;\
+ * l.mtspr r0,r3,SPR_SR ;\
+ * l.movhi r3,hi(0xf0000100) ;\
+ * l.ori r3,r3,lo(0xf0000100) ;\
+ * l.jr r3 ;\
+ * l.nop 1
+ *
+ * #endif
+ */
+
+/* DSCR: this is the same as EXCEPTION_HANDLE(), we are just
+ * a bit more carefull (if we have a PT_SP or current pointer
+ * corruption) and set them up from 'current_set'
+ *
+ */
+#define UNHANDLED_EXCEPTION(handler) \
+ EXCEPTION_T_STORE_GPR30 ;\
+ EXCEPTION_T_STORE_GPR10 ;\
+ EXCEPTION_T_STORE_SP ;\
+ /* temporary store r3, r9 into r1, r10 */ ;\
+ l.addi r1,r3,0x0 ;\
+ l.addi r10,r9,0x0 ;\
+ LOAD_SYMBOL_2_GPR(r9,_string_unhandled_exception) ;\
+ tophys (r3,r9) ;\
+ l.jal _emergency_print ;\
+ l.nop ;\
+ l.mfspr r3,r0,SPR_NPC ;\
+ l.jal _emergency_print_nr ;\
+ l.andi r3,r3,0x1f00 ;\
+ LOAD_SYMBOL_2_GPR(r9,_string_epc_prefix) ;\
+ tophys (r3,r9) ;\
+ l.jal _emergency_print ;\
+ l.nop ;\
+ l.jal _emergency_print_nr ;\
+ l.mfspr r3,r0,SPR_EPCR_BASE ;\
+ LOAD_SYMBOL_2_GPR(r9,_string_nl) ;\
+ tophys (r3,r9) ;\
+ l.jal _emergency_print ;\
+ l.nop ;\
+ /* end of printing */ ;\
+ l.addi r3,r1,0x0 ;\
+ l.addi r9,r10,0x0 ;\
+ /* extract current, ksp from current_set */ ;\
+ LOAD_SYMBOL_2_GPR(r1,_unhandled_stack_top) ;\
+ LOAD_SYMBOL_2_GPR(r10,init_thread_union) ;\
+ /* create new stack frame, save only needed gprs */ ;\
+ /* r1: KSP, r10: current, r31: __pa(KSP) */ ;\
+ /* r12: temp, syscall indicator, r13 temp */ ;\
+ l.addi r1,r1,-(INT_FRAME_SIZE) ;\
+ /* r1 is KSP, r30 is __pa(KSP) */ ;\
+ tophys (r30,r1) ;\
+ l.sw PT_GPR12(r30),r12 ;\
+ l.mfspr r12,r0,SPR_EPCR_BASE ;\
+ l.sw PT_PC(r30),r12 ;\
+ l.mfspr r12,r0,SPR_ESR_BASE ;\
+ l.sw PT_SR(r30),r12 ;\
+ /* save r31 */ ;\
+ EXCEPTION_T_LOAD_GPR30(r12) ;\
+ l.sw PT_GPR30(r30),r12 ;\
+ /* save r10 as was prior to exception */ ;\
+ EXCEPTION_T_LOAD_GPR10(r12) ;\
+ l.sw PT_GPR10(r30),r12 ;\
+ /* save PT_SP as was prior to exception */ ;\
+ EXCEPTION_T_LOAD_SP(r12) ;\
+ l.sw PT_SP(r30),r12 ;\
+ l.sw PT_GPR13(r30),r13 ;\
+ /* --> */ ;\
+ /* save exception r4, set r4 = EA */ ;\
+ l.sw PT_GPR4(r30),r4 ;\
+ l.mfspr r4,r0,SPR_EEAR_BASE ;\
+ /* r12 == 1 if we come from syscall */ ;\
+ CLEAR_GPR(r12) ;\
+ /* ----- play a MMU trick ----- */ ;\
+ l.ori r30,r0,(EXCEPTION_SR) ;\
+ l.mtspr r0,r30,SPR_ESR_BASE ;\
+ /* r31: EA address of handler */ ;\
+ LOAD_SYMBOL_2_GPR(r30,handler) ;\
+ l.mtspr r0,r30,SPR_EPCR_BASE ;\
+ l.rfe
+
+/* =====================================================[ exceptions] === */
+
+/* ---[ 0x100: RESET exception ]----------------------------------------- */
+ .org 0x100
+ /* Jump to .init code at _start which lives in the .head section
+ * and will be discarded after boot.
+ */
+ LOAD_SYMBOL_2_GPR(r15, _start)
+ tophys (r13,r15) /* MMU disabled */
+ l.jr r13
+ l.nop
+
+/* ---[ 0x200: BUS exception ]------------------------------------------- */
+ .org 0x200
+_dispatch_bus_fault:
+ EXCEPTION_HANDLE(_bus_fault_handler)
+
+/* ---[ 0x300: Data Page Fault exception ]------------------------------- */
+ .org 0x300
+_dispatch_do_dpage_fault:
+// totaly disable timer interrupt
+// l.mtspr r0,r0,SPR_TTMR
+// DEBUG_TLB_PROBE(0x300)
+// EXCEPTION_DEBUG_VALUE_ER_ENABLED(0x300)
+ EXCEPTION_HANDLE(_data_page_fault_handler)
+
+/* ---[ 0x400: Insn Page Fault exception ]------------------------------- */
+ .org 0x400
+_dispatch_do_ipage_fault:
+// totaly disable timer interrupt
+// l.mtspr r0,r0,SPR_TTMR
+// DEBUG_TLB_PROBE(0x400)
+// EXCEPTION_DEBUG_VALUE_ER_ENABLED(0x400)
+ EXCEPTION_HANDLE(_insn_page_fault_handler)
+
+/* ---[ 0x500: Timer exception ]----------------------------------------- */
+ .org 0x500
+ EXCEPTION_HANDLE(_timer_handler)
+
+/* ---[ 0x600: Alignment exception ]-------------------------------------- */
+ .org 0x600
+ EXCEPTION_HANDLE(_alignment_handler)
+
+/* ---[ 0x700: Illegal insn exception ]---------------------------------- */
+ .org 0x700
+ EXCEPTION_HANDLE(_illegal_instruction_handler)
+
+/* ---[ 0x800: External interrupt exception ]---------------------------- */
+ .org 0x800
+ EXCEPTION_HANDLE(_external_irq_handler)
+
+/* ---[ 0x900: DTLB miss exception ]------------------------------------- */
+ .org 0x900
+ l.j boot_dtlb_miss_handler
+ l.nop
+
+/* ---[ 0xa00: ITLB miss exception ]------------------------------------- */
+ .org 0xa00
+ l.j boot_itlb_miss_handler
+ l.nop
+
+/* ---[ 0xb00: Range exception ]----------------------------------------- */
+ .org 0xb00
+ UNHANDLED_EXCEPTION(_vector_0xb00)
+
+/* ---[ 0xc00: Syscall exception ]--------------------------------------- */
+ .org 0xc00
+ EXCEPTION_HANDLE(_sys_call_handler)
+
+/* ---[ 0xd00: Floating point exception ]--------------------------------- */
+ .org 0xd00
+ EXCEPTION_HANDLE(_fpe_trap_handler)
+
+/* ---[ 0xe00: Trap exception ]------------------------------------------ */
+ .org 0xe00
+// UNHANDLED_EXCEPTION(_vector_0xe00)
+ EXCEPTION_HANDLE(_trap_handler)
+
+/* ---[ 0xf00: Reserved exception ]-------------------------------------- */
+ .org 0xf00
+ UNHANDLED_EXCEPTION(_vector_0xf00)
+
+/* ---[ 0x1000: Reserved exception ]------------------------------------- */
+ .org 0x1000
+ UNHANDLED_EXCEPTION(_vector_0x1000)
+
+/* ---[ 0x1100: Reserved exception ]------------------------------------- */
+ .org 0x1100
+ UNHANDLED_EXCEPTION(_vector_0x1100)
+
+/* ---[ 0x1200: Reserved exception ]------------------------------------- */
+ .org 0x1200
+ UNHANDLED_EXCEPTION(_vector_0x1200)
+
+/* ---[ 0x1300: Reserved exception ]------------------------------------- */
+ .org 0x1300
+ UNHANDLED_EXCEPTION(_vector_0x1300)
+
+/* ---[ 0x1400: Reserved exception ]------------------------------------- */
+ .org 0x1400
+ UNHANDLED_EXCEPTION(_vector_0x1400)
+
+/* ---[ 0x1500: Reserved exception ]------------------------------------- */
+ .org 0x1500
+ UNHANDLED_EXCEPTION(_vector_0x1500)
+
+/* ---[ 0x1600: Reserved exception ]------------------------------------- */
+ .org 0x1600
+ UNHANDLED_EXCEPTION(_vector_0x1600)
+
+/* ---[ 0x1700: Reserved exception ]------------------------------------- */
+ .org 0x1700
+ UNHANDLED_EXCEPTION(_vector_0x1700)
+
+/* ---[ 0x1800: Reserved exception ]------------------------------------- */
+ .org 0x1800
+ UNHANDLED_EXCEPTION(_vector_0x1800)
+
+/* ---[ 0x1900: Reserved exception ]------------------------------------- */
+ .org 0x1900
+ UNHANDLED_EXCEPTION(_vector_0x1900)
+
+/* ---[ 0x1a00: Reserved exception ]------------------------------------- */
+ .org 0x1a00
+ UNHANDLED_EXCEPTION(_vector_0x1a00)
+
+/* ---[ 0x1b00: Reserved exception ]------------------------------------- */
+ .org 0x1b00
+ UNHANDLED_EXCEPTION(_vector_0x1b00)
+
+/* ---[ 0x1c00: Reserved exception ]------------------------------------- */
+ .org 0x1c00
+ UNHANDLED_EXCEPTION(_vector_0x1c00)
+
+/* ---[ 0x1d00: Reserved exception ]------------------------------------- */
+ .org 0x1d00
+ UNHANDLED_EXCEPTION(_vector_0x1d00)
+
+/* ---[ 0x1e00: Reserved exception ]------------------------------------- */
+ .org 0x1e00
+ UNHANDLED_EXCEPTION(_vector_0x1e00)
+
+/* ---[ 0x1f00: Reserved exception ]------------------------------------- */
+ .org 0x1f00
+ UNHANDLED_EXCEPTION(_vector_0x1f00)
+
+ .org 0x2000
+/* ===================================================[ kernel start ]=== */
+
+/* .text*/
+
+/* This early stuff belongs in HEAD, but some of the functions below definitely
+ * don't... */
+
+ __HEAD
+ .global _start
+_start:
+ /* Init r0 to zero as per spec */
+ CLEAR_GPR(r0)
+
+ /* save kernel parameters */
+ l.or r25,r0,r3 /* pointer to fdt */
+
+ /*
+ * ensure a deterministic start
+ */
+
+ l.ori r3,r0,0x1
+ l.mtspr r0,r3,SPR_SR
+
+ /*
+ * Start the TTCR as early as possible, so that the RNG can make use of
+ * measurements of boot time from the earliest opportunity. Especially
+ * important is that the TTCR does not return zero by the time we reach
+ * random_init().
+ */
+ l.movhi r3,hi(SPR_TTMR_CR)
+ l.mtspr r0,r3,SPR_TTMR
+
+ CLEAR_GPR(r1)
+ CLEAR_GPR(r2)
+ CLEAR_GPR(r3)
+ CLEAR_GPR(r4)
+ CLEAR_GPR(r5)
+ CLEAR_GPR(r6)
+ CLEAR_GPR(r7)
+ CLEAR_GPR(r8)
+ CLEAR_GPR(r9)
+ CLEAR_GPR(r10)
+ CLEAR_GPR(r11)
+ CLEAR_GPR(r12)
+ CLEAR_GPR(r13)
+ CLEAR_GPR(r14)
+ CLEAR_GPR(r15)
+ CLEAR_GPR(r16)
+ CLEAR_GPR(r17)
+ CLEAR_GPR(r18)
+ CLEAR_GPR(r19)
+ CLEAR_GPR(r20)
+ CLEAR_GPR(r21)
+ CLEAR_GPR(r22)
+ CLEAR_GPR(r23)
+ CLEAR_GPR(r24)
+ CLEAR_GPR(r26)
+ CLEAR_GPR(r27)
+ CLEAR_GPR(r28)
+ CLEAR_GPR(r29)
+ CLEAR_GPR(r30)
+ CLEAR_GPR(r31)
+
+#ifdef CONFIG_SMP
+ l.mfspr r26,r0,SPR_COREID
+ l.sfeq r26,r0
+ l.bnf secondary_wait
+ l.nop
+#endif
+ /*
+ * set up initial ksp and current
+ */
+ /* setup kernel stack */
+ LOAD_SYMBOL_2_GPR(r1,init_thread_union + THREAD_SIZE)
+ LOAD_SYMBOL_2_GPR(r10,init_thread_union) // setup current
+ tophys (r31,r10)
+ l.sw TI_KSP(r31), r1
+
+ l.ori r4,r0,0x0
+
+
+ /*
+ * .data contains initialized data,
+ * .bss contains uninitialized data - clear it up
+ */
+clear_bss:
+ LOAD_SYMBOL_2_GPR(r24, __bss_start)
+ LOAD_SYMBOL_2_GPR(r26, _end)
+ tophys(r28,r24)
+ tophys(r30,r26)
+ CLEAR_GPR(r24)
+ CLEAR_GPR(r26)
+1:
+ l.sw (0)(r28),r0
+ l.sfltu r28,r30
+ l.bf 1b
+ l.addi r28,r28,4
+
+enable_ic:
+ l.jal _ic_enable
+ l.nop
+
+enable_dc:
+ l.jal _dc_enable
+ l.nop
+
+flush_tlb:
+ l.jal _flush_tlb
+ l.nop
+
+/* The MMU needs to be enabled before or1k_early_setup is called */
+
+enable_mmu:
+ /*
+ * enable dmmu & immu
+ * SR[5] = 0, SR[6] = 0, 6th and 7th bit of SR set to 0
+ */
+ l.mfspr r30,r0,SPR_SR
+ l.movhi r28,hi(SPR_SR_DME | SPR_SR_IME)
+ l.ori r28,r28,lo(SPR_SR_DME | SPR_SR_IME)
+ l.or r30,r30,r28
+ l.mtspr r0,r30,SPR_SR
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+
+ // reset the simulation counters
+ l.nop 5
+
+ /* check fdt header magic word */
+ l.lwz r3,0(r25) /* load magic from fdt into r3 */
+ l.movhi r4,hi(OF_DT_HEADER)
+ l.ori r4,r4,lo(OF_DT_HEADER)
+ l.sfeq r3,r4
+ l.bf _fdt_found
+ l.nop
+ /* magic number mismatch, set fdt pointer to null */
+ l.or r25,r0,r0
+_fdt_found:
+ /* pass fdt pointer to or1k_early_setup in r3 */
+ l.or r3,r0,r25
+ LOAD_SYMBOL_2_GPR(r24, or1k_early_setup)
+ l.jalr r24
+ l.nop
+
+clear_regs:
+ /*
+ * clear all GPRS to increase determinism
+ */
+ CLEAR_GPR(r2)
+ CLEAR_GPR(r3)
+ CLEAR_GPR(r4)
+ CLEAR_GPR(r5)
+ CLEAR_GPR(r6)
+ CLEAR_GPR(r7)
+ CLEAR_GPR(r8)
+ CLEAR_GPR(r9)
+ CLEAR_GPR(r11)
+ CLEAR_GPR(r12)
+ CLEAR_GPR(r13)
+ CLEAR_GPR(r14)
+ CLEAR_GPR(r15)
+ CLEAR_GPR(r16)
+ CLEAR_GPR(r17)
+ CLEAR_GPR(r18)
+ CLEAR_GPR(r19)
+ CLEAR_GPR(r20)
+ CLEAR_GPR(r21)
+ CLEAR_GPR(r22)
+ CLEAR_GPR(r23)
+ CLEAR_GPR(r24)
+ CLEAR_GPR(r25)
+ CLEAR_GPR(r26)
+ CLEAR_GPR(r27)
+ CLEAR_GPR(r28)
+ CLEAR_GPR(r29)
+ CLEAR_GPR(r30)
+ CLEAR_GPR(r31)
+
+jump_start_kernel:
+ /*
+ * jump to kernel entry (start_kernel)
+ */
+ LOAD_SYMBOL_2_GPR(r30, start_kernel)
+ l.jr r30
+ l.nop
+
+_flush_tlb:
+ /*
+ * I N V A L I D A T E T L B e n t r i e s
+ */
+ LOAD_SYMBOL_2_GPR(r5,SPR_DTLBMR_BASE(0))
+ LOAD_SYMBOL_2_GPR(r6,SPR_ITLBMR_BASE(0))
+ l.addi r7,r0,128 /* Maximum number of sets */
+1:
+ l.mtspr r5,r0,0x0
+ l.mtspr r6,r0,0x0
+
+ l.addi r5,r5,1
+ l.addi r6,r6,1
+ l.sfeq r7,r0
+ l.bnf 1b
+ l.addi r7,r7,-1
+
+ l.jr r9
+ l.nop
+
+#ifdef CONFIG_SMP
+secondary_wait:
+ /* Doze the cpu until we are asked to run */
+ /* If we dont have power management skip doze */
+ l.mfspr r25,r0,SPR_UPR
+ l.andi r25,r25,SPR_UPR_PMP
+ l.sfeq r25,r0
+ l.bf secondary_check_release
+ l.nop
+
+ /* Setup special secondary exception handler */
+ LOAD_SYMBOL_2_GPR(r3, _secondary_evbar)
+ tophys(r25,r3)
+ l.mtspr r0,r25,SPR_EVBAR
+
+ /* Enable Interrupts */
+ l.mfspr r25,r0,SPR_SR
+ l.ori r25,r25,SPR_SR_IEE
+ l.mtspr r0,r25,SPR_SR
+
+ /* Unmask interrupts interrupts */
+ l.mfspr r25,r0,SPR_PICMR
+ l.ori r25,r25,0xffff
+ l.mtspr r0,r25,SPR_PICMR
+
+ /* Doze */
+ l.mfspr r25,r0,SPR_PMR
+ LOAD_SYMBOL_2_GPR(r3, SPR_PMR_DME)
+ l.or r25,r25,r3
+ l.mtspr r0,r25,SPR_PMR
+
+ /* Wakeup - Restore exception handler */
+ l.mtspr r0,r0,SPR_EVBAR
+
+secondary_check_release:
+ /*
+ * Check if we actually got the release signal, if not go-back to
+ * sleep.
+ */
+ l.mfspr r25,r0,SPR_COREID
+ LOAD_SYMBOL_2_GPR(r3, secondary_release)
+ tophys(r4, r3)
+ l.lwz r3,0(r4)
+ l.sfeq r25,r3
+ l.bnf secondary_wait
+ l.nop
+ /* fall through to secondary_init */
+
+secondary_init:
+ /*
+ * set up initial ksp and current
+ */
+ LOAD_SYMBOL_2_GPR(r10, secondary_thread_info)
+ tophys (r30,r10)
+ l.lwz r10,0(r30)
+ l.addi r1,r10,THREAD_SIZE
+ tophys (r30,r10)
+ l.sw TI_KSP(r30),r1
+
+ l.jal _ic_enable
+ l.nop
+
+ l.jal _dc_enable
+ l.nop
+
+ l.jal _flush_tlb
+ l.nop
+
+ /*
+ * enable dmmu & immu
+ */
+ l.mfspr r30,r0,SPR_SR
+ l.movhi r28,hi(SPR_SR_DME | SPR_SR_IME)
+ l.ori r28,r28,lo(SPR_SR_DME | SPR_SR_IME)
+ l.or r30,r30,r28
+ /*
+ * This is a bit tricky, we need to switch over from physical addresses
+ * to virtual addresses on the fly.
+ * To do that, we first set up ESR with the IME and DME bits set.
+ * Then EPCR is set to secondary_start and then a l.rfe is issued to
+ * "jump" to that.
+ */
+ l.mtspr r0,r30,SPR_ESR_BASE
+ LOAD_SYMBOL_2_GPR(r30, secondary_start)
+ l.mtspr r0,r30,SPR_EPCR_BASE
+ l.rfe
+
+secondary_start:
+ LOAD_SYMBOL_2_GPR(r30, secondary_start_kernel)
+ l.jr r30
+ l.nop
+
+#endif
+
+/* ========================================[ cache ]=== */
+
+ /* alignment here so we don't change memory offsets with
+ * memory controller defined
+ */
+ .align 0x2000
+
+_ic_enable:
+ /* Check if IC present and skip enabling otherwise */
+ l.mfspr r24,r0,SPR_UPR
+ l.andi r26,r24,SPR_UPR_ICP
+ l.sfeq r26,r0
+ l.bf 9f
+ l.nop
+
+ /* Disable IC */
+ l.mfspr r6,r0,SPR_SR
+ l.addi r5,r0,-1
+ l.xori r5,r5,SPR_SR_ICE
+ l.and r5,r6,r5
+ l.mtspr r0,r5,SPR_SR
+
+ /* Establish cache block size
+ If BS=0, 16;
+ If BS=1, 32;
+ r14 contain block size
+ */
+ l.mfspr r24,r0,SPR_ICCFGR
+ l.andi r26,r24,SPR_ICCFGR_CBS
+ l.srli r28,r26,7
+ l.ori r30,r0,16
+ l.sll r14,r30,r28
+
+ /* Establish number of cache sets
+ r16 contains number of cache sets
+ r28 contains log(# of cache sets)
+ */
+ l.andi r26,r24,SPR_ICCFGR_NCS
+ l.srli r28,r26,3
+ l.ori r30,r0,1
+ l.sll r16,r30,r28
+
+ /* Invalidate IC */
+ l.addi r6,r0,0
+ l.sll r5,r14,r28
+// l.mul r5,r14,r16
+// l.trap 1
+// l.addi r5,r0,IC_SIZE
+1:
+ l.mtspr r0,r6,SPR_ICBIR
+ l.sfne r6,r5
+ l.bf 1b
+ l.add r6,r6,r14
+ // l.addi r6,r6,IC_LINE
+
+ /* Enable IC */
+ l.mfspr r6,r0,SPR_SR
+ l.ori r6,r6,SPR_SR_ICE
+ l.mtspr r0,r6,SPR_SR
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+ l.nop
+9:
+ l.jr r9
+ l.nop
+
+_dc_enable:
+ /* Check if DC present and skip enabling otherwise */
+ l.mfspr r24,r0,SPR_UPR
+ l.andi r26,r24,SPR_UPR_DCP
+ l.sfeq r26,r0
+ l.bf 9f
+ l.nop
+
+ /* Disable DC */
+ l.mfspr r6,r0,SPR_SR
+ l.addi r5,r0,-1
+ l.xori r5,r5,SPR_SR_DCE
+ l.and r5,r6,r5
+ l.mtspr r0,r5,SPR_SR
+
+ /* Establish cache block size
+ If BS=0, 16;
+ If BS=1, 32;
+ r14 contain block size
+ */
+ l.mfspr r24,r0,SPR_DCCFGR
+ l.andi r26,r24,SPR_DCCFGR_CBS
+ l.srli r28,r26,7
+ l.ori r30,r0,16
+ l.sll r14,r30,r28
+
+ /* Establish number of cache sets
+ r16 contains number of cache sets
+ r28 contains log(# of cache sets)
+ */
+ l.andi r26,r24,SPR_DCCFGR_NCS
+ l.srli r28,r26,3
+ l.ori r30,r0,1
+ l.sll r16,r30,r28
+
+ /* Invalidate DC */
+ l.addi r6,r0,0
+ l.sll r5,r14,r28
+1:
+ l.mtspr r0,r6,SPR_DCBIR
+ l.sfne r6,r5
+ l.bf 1b
+ l.add r6,r6,r14
+
+ /* Enable DC */
+ l.mfspr r6,r0,SPR_SR
+ l.ori r6,r6,SPR_SR_DCE
+ l.mtspr r0,r6,SPR_SR
+9:
+ l.jr r9
+ l.nop
+
+/* ===============================================[ page table masks ]=== */
+
+#define DTLB_UP_CONVERT_MASK 0x3fa
+#define ITLB_UP_CONVERT_MASK 0x3a
+
+/* for SMP we'd have (this is a bit subtle, CC must be always set
+ * for SMP, but since we have _PAGE_PRESENT bit always defined
+ * we can just modify the mask)
+ */
+#define DTLB_SMP_CONVERT_MASK 0x3fb
+#define ITLB_SMP_CONVERT_MASK 0x3b
+
+/* ---[ boot dtlb miss handler ]----------------------------------------- */
+
+boot_dtlb_miss_handler:
+
+/* mask for DTLB_MR register: - (0) sets V (valid) bit,
+ * - (31-12) sets bits belonging to VPN (31-12)
+ */
+#define DTLB_MR_MASK 0xfffff001
+
+/* mask for DTLB_TR register: - (2) sets CI (cache inhibit) bit,
+ * - (4) sets A (access) bit,
+ * - (5) sets D (dirty) bit,
+ * - (8) sets SRE (superuser read) bit
+ * - (9) sets SWE (superuser write) bit
+ * - (31-12) sets bits belonging to VPN (31-12)
+ */
+#define DTLB_TR_MASK 0xfffff332
+
+/* These are for masking out the VPN/PPN value from the MR/TR registers...
+ * it's not the same as the PFN */
+#define VPN_MASK 0xfffff000
+#define PPN_MASK 0xfffff000
+
+
+ EXCEPTION_STORE_GPR6
+
+#if 0
+ l.mfspr r6,r0,SPR_ESR_BASE //
+ l.andi r6,r6,SPR_SR_SM // are we in kernel mode ?
+ l.sfeqi r6,0 // r6 == 0x1 --> SM
+ l.bf exit_with_no_dtranslation //
+ l.nop
+#endif
+
+ /* this could be optimized by moving storing of
+ * non r6 registers here, and jumping r6 restore
+ * if not in supervisor mode
+ */
+
+ EXCEPTION_STORE_GPR2
+ EXCEPTION_STORE_GPR3
+ EXCEPTION_STORE_GPR4
+ EXCEPTION_STORE_GPR5
+
+ l.mfspr r4,r0,SPR_EEAR_BASE // get the offending EA
+
+immediate_translation:
+ CLEAR_GPR(r6)
+
+ l.srli r3,r4,0xd // r3 <- r4 / 8192 (sets are relative to page size (8Kb) NOT VPN size (4Kb)
+
+ l.mfspr r6, r0, SPR_DMMUCFGR
+ l.andi r6, r6, SPR_DMMUCFGR_NTS
+ l.srli r6, r6, SPR_DMMUCFGR_NTS_OFF
+ l.ori r5, r0, 0x1
+ l.sll r5, r5, r6 // r5 = number DMMU sets
+ l.addi r6, r5, -1 // r6 = nsets mask
+ l.and r2, r3, r6 // r2 <- r3 % NSETS_MASK
+
+ l.or r6,r6,r4 // r6 <- r4
+ l.ori r6,r6,~(VPN_MASK) // r6 <- VPN :VPN .xfff - clear up lo(r6) to 0x**** *fff
+ l.movhi r5,hi(DTLB_MR_MASK) // r5 <- ffff:0000.x000
+ l.ori r5,r5,lo(DTLB_MR_MASK) // r5 <- ffff:1111.x001 - apply DTLB_MR_MASK
+ l.and r5,r5,r6 // r5 <- VPN :VPN .x001 - we have DTLBMR entry
+ l.mtspr r2,r5,SPR_DTLBMR_BASE(0) // set DTLBMR
+
+ /* set up DTLB with no translation for EA <= 0xbfffffff */
+ LOAD_SYMBOL_2_GPR(r6,0xbfffffff)
+ l.sfgeu r6,r4 // flag if r6 >= r4 (if 0xbfffffff >= EA)
+ l.bf 1f // goto out
+ l.and r3,r4,r4 // delay slot :: 24 <- r4 (if flag==1)
+
+ tophys(r3,r4) // r3 <- PA
+1:
+ l.ori r3,r3,~(PPN_MASK) // r3 <- PPN :PPN .xfff - clear up lo(r6) to 0x**** *fff
+ l.movhi r5,hi(DTLB_TR_MASK) // r5 <- ffff:0000.x000
+ l.ori r5,r5,lo(DTLB_TR_MASK) // r5 <- ffff:1111.x330 - apply DTLB_MR_MASK
+ l.and r5,r5,r3 // r5 <- PPN :PPN .x330 - we have DTLBTR entry
+ l.mtspr r2,r5,SPR_DTLBTR_BASE(0) // set DTLBTR
+
+ EXCEPTION_LOAD_GPR6
+ EXCEPTION_LOAD_GPR5
+ EXCEPTION_LOAD_GPR4
+ EXCEPTION_LOAD_GPR3
+ EXCEPTION_LOAD_GPR2
+
+ l.rfe // SR <- ESR, PC <- EPC
+
+exit_with_no_dtranslation:
+ /* EA out of memory or not in supervisor mode */
+ EXCEPTION_LOAD_GPR6
+ EXCEPTION_LOAD_GPR4
+ l.j _dispatch_bus_fault
+
+/* ---[ boot itlb miss handler ]----------------------------------------- */
+
+boot_itlb_miss_handler:
+
+/* mask for ITLB_MR register: - sets V (valid) bit,
+ * - sets bits belonging to VPN (15-12)
+ */
+#define ITLB_MR_MASK 0xfffff001
+
+/* mask for ITLB_TR register: - sets A (access) bit,
+ * - sets SXE (superuser execute) bit
+ * - sets bits belonging to VPN (15-12)
+ */
+#define ITLB_TR_MASK 0xfffff050
+
+/*
+#define VPN_MASK 0xffffe000
+#define PPN_MASK 0xffffe000
+*/
+
+
+
+ EXCEPTION_STORE_GPR2
+ EXCEPTION_STORE_GPR3
+ EXCEPTION_STORE_GPR4
+ EXCEPTION_STORE_GPR5
+ EXCEPTION_STORE_GPR6
+
+#if 0
+ l.mfspr r6,r0,SPR_ESR_BASE //
+ l.andi r6,r6,SPR_SR_SM // are we in kernel mode ?
+ l.sfeqi r6,0 // r6 == 0x1 --> SM
+ l.bf exit_with_no_itranslation
+ l.nop
+#endif
+
+
+ l.mfspr r4,r0,SPR_EEAR_BASE // get the offending EA
+
+earlyearly:
+ CLEAR_GPR(r6)
+
+ l.srli r3,r4,0xd // r3 <- r4 / 8192 (sets are relative to page size (8Kb) NOT VPN size (4Kb)
+
+ l.mfspr r6, r0, SPR_IMMUCFGR
+ l.andi r6, r6, SPR_IMMUCFGR_NTS
+ l.srli r6, r6, SPR_IMMUCFGR_NTS_OFF
+ l.ori r5, r0, 0x1
+ l.sll r5, r5, r6 // r5 = number IMMU sets from IMMUCFGR
+ l.addi r6, r5, -1 // r6 = nsets mask
+ l.and r2, r3, r6 // r2 <- r3 % NSETS_MASK
+
+ l.or r6,r6,r4 // r6 <- r4
+ l.ori r6,r6,~(VPN_MASK) // r6 <- VPN :VPN .xfff - clear up lo(r6) to 0x**** *fff
+ l.movhi r5,hi(ITLB_MR_MASK) // r5 <- ffff:0000.x000
+ l.ori r5,r5,lo(ITLB_MR_MASK) // r5 <- ffff:1111.x001 - apply ITLB_MR_MASK
+ l.and r5,r5,r6 // r5 <- VPN :VPN .x001 - we have ITLBMR entry
+ l.mtspr r2,r5,SPR_ITLBMR_BASE(0) // set ITLBMR
+
+ /*
+ * set up ITLB with no translation for EA <= 0x0fffffff
+ *
+ * we need this for head.S mapping (EA = PA). if we move all functions
+ * which run with mmu enabled into entry.S, we might be able to eliminate this.
+ *
+ */
+ LOAD_SYMBOL_2_GPR(r6,0x0fffffff)
+ l.sfgeu r6,r4 // flag if r6 >= r4 (if 0xb0ffffff >= EA)
+ l.bf 1f // goto out
+ l.and r3,r4,r4 // delay slot :: 24 <- r4 (if flag==1)
+
+ tophys(r3,r4) // r3 <- PA
+1:
+ l.ori r3,r3,~(PPN_MASK) // r3 <- PPN :PPN .xfff - clear up lo(r6) to 0x**** *fff
+ l.movhi r5,hi(ITLB_TR_MASK) // r5 <- ffff:0000.x000
+ l.ori r5,r5,lo(ITLB_TR_MASK) // r5 <- ffff:1111.x050 - apply ITLB_MR_MASK
+ l.and r5,r5,r3 // r5 <- PPN :PPN .x050 - we have ITLBTR entry
+ l.mtspr r2,r5,SPR_ITLBTR_BASE(0) // set ITLBTR
+
+ EXCEPTION_LOAD_GPR6
+ EXCEPTION_LOAD_GPR5
+ EXCEPTION_LOAD_GPR4
+ EXCEPTION_LOAD_GPR3
+ EXCEPTION_LOAD_GPR2
+
+ l.rfe // SR <- ESR, PC <- EPC
+
+exit_with_no_itranslation:
+ EXCEPTION_LOAD_GPR4
+ EXCEPTION_LOAD_GPR6
+ l.j _dispatch_bus_fault
+ l.nop
+
+/* ====================================================================== */
+/*
+ * Stuff below here shouldn't go into .head section... maybe this stuff
+ * can be moved to entry.S ???
+ */
+
+/* ==============================================[ DTLB miss handler ]=== */
+
+/*
+ * Comments:
+ * Exception handlers are entered with MMU off so the following handler
+ * needs to use physical addressing
+ *
+ */
+
+ .text
+ENTRY(dtlb_miss_handler)
+ EXCEPTION_STORE_GPR2
+ EXCEPTION_STORE_GPR3
+ EXCEPTION_STORE_GPR4
+ /*
+ * get EA of the miss
+ */
+ l.mfspr r2,r0,SPR_EEAR_BASE
+ /*
+ * pmd = (pmd_t *)(current_pgd + pgd_index(daddr));
+ */
+ GET_CURRENT_PGD(r3,r4) // r3 is current_pgd, r4 is temp
+ l.srli r4,r2,0x18 // >> PAGE_SHIFT + (PAGE_SHIFT - 2)
+ l.slli r4,r4,0x2 // to get address << 2
+ l.add r3,r4,r3 // r4 is pgd_index(daddr)
+ /*
+ * if (pmd_none(*pmd))
+ * goto pmd_none:
+ */
+ tophys (r4,r3)
+ l.lwz r3,0x0(r4) // get *pmd value
+ l.sfne r3,r0
+ l.bnf d_pmd_none
+ l.addi r3,r0,0xffffe000 // PAGE_MASK
+
+d_pmd_good:
+ /*
+ * pte = *pte_offset(pmd, daddr);
+ */
+ l.lwz r4,0x0(r4) // get **pmd value
+ l.and r4,r4,r3 // & PAGE_MASK
+ l.srli r2,r2,0xd // >> PAGE_SHIFT, r2 == EEAR
+ l.andi r3,r2,0x7ff // (1UL << PAGE_SHIFT - 2) - 1
+ l.slli r3,r3,0x2 // to get address << 2
+ l.add r3,r3,r4
+ l.lwz r3,0x0(r3) // this is pte at last
+ /*
+ * if (!pte_present(pte))
+ */
+ l.andi r4,r3,0x1
+ l.sfne r4,r0 // is pte present
+ l.bnf d_pte_not_present
+ l.addi r4,r0,0xffffe3fa // PAGE_MASK | DTLB_UP_CONVERT_MASK
+ /*
+ * fill DTLB TR register
+ */
+ l.and r4,r3,r4 // apply the mask
+ // Determine number of DMMU sets
+ l.mfspr r2, r0, SPR_DMMUCFGR
+ l.andi r2, r2, SPR_DMMUCFGR_NTS
+ l.srli r2, r2, SPR_DMMUCFGR_NTS_OFF
+ l.ori r3, r0, 0x1
+ l.sll r3, r3, r2 // r3 = number DMMU sets DMMUCFGR
+ l.addi r2, r3, -1 // r2 = nsets mask
+ l.mfspr r3, r0, SPR_EEAR_BASE
+ l.srli r3, r3, 0xd // >> PAGE_SHIFT
+ l.and r2, r3, r2 // calc offset: & (NUM_TLB_ENTRIES-1)
+ //NUM_TLB_ENTRIES
+ l.mtspr r2,r4,SPR_DTLBTR_BASE(0)
+ /*
+ * fill DTLB MR register
+ */
+ l.slli r3, r3, 0xd /* << PAGE_SHIFT => EA & PAGE_MASK */
+ l.ori r4,r3,0x1 // set hardware valid bit: DTBL_MR entry
+ l.mtspr r2,r4,SPR_DTLBMR_BASE(0)
+
+ EXCEPTION_LOAD_GPR2
+ EXCEPTION_LOAD_GPR3
+ EXCEPTION_LOAD_GPR4
+ l.rfe
+d_pmd_none:
+d_pte_not_present:
+ EXCEPTION_LOAD_GPR2
+ EXCEPTION_LOAD_GPR3
+ EXCEPTION_LOAD_GPR4
+ EXCEPTION_HANDLE(_dtlb_miss_page_fault_handler)
+
+/* ==============================================[ ITLB miss handler ]=== */
+ENTRY(itlb_miss_handler)
+ EXCEPTION_STORE_GPR2
+ EXCEPTION_STORE_GPR3
+ EXCEPTION_STORE_GPR4
+ /*
+ * get EA of the miss
+ */
+ l.mfspr r2,r0,SPR_EEAR_BASE
+
+ /*
+ * pmd = (pmd_t *)(current_pgd + pgd_index(daddr));
+ *
+ */
+ GET_CURRENT_PGD(r3,r4) // r3 is current_pgd, r5 is temp
+ l.srli r4,r2,0x18 // >> PAGE_SHIFT + (PAGE_SHIFT - 2)
+ l.slli r4,r4,0x2 // to get address << 2
+ l.add r3,r4,r3 // r4 is pgd_index(daddr)
+ /*
+ * if (pmd_none(*pmd))
+ * goto pmd_none:
+ */
+ tophys (r4,r3)
+ l.lwz r3,0x0(r4) // get *pmd value
+ l.sfne r3,r0
+ l.bnf i_pmd_none
+ l.addi r3,r0,0xffffe000 // PAGE_MASK
+
+i_pmd_good:
+ /*
+ * pte = *pte_offset(pmd, iaddr);
+ *
+ */
+ l.lwz r4,0x0(r4) // get **pmd value
+ l.and r4,r4,r3 // & PAGE_MASK
+ l.srli r2,r2,0xd // >> PAGE_SHIFT, r2 == EEAR
+ l.andi r3,r2,0x7ff // (1UL << PAGE_SHIFT - 2) - 1
+ l.slli r3,r3,0x2 // to get address << 2
+ l.add r3,r3,r4
+ l.lwz r3,0x0(r3) // this is pte at last
+ /*
+ * if (!pte_present(pte))
+ *
+ */
+ l.andi r4,r3,0x1
+ l.sfne r4,r0 // is pte present
+ l.bnf i_pte_not_present
+ l.addi r4,r0,0xffffe03a // PAGE_MASK | ITLB_UP_CONVERT_MASK
+ /*
+ * fill ITLB TR register
+ */
+ l.and r4,r3,r4 // apply the mask
+ l.andi r3,r3,0x7c0 // _PAGE_EXEC | _PAGE_SRE | _PAGE_SWE | _PAGE_URE | _PAGE_UWE
+ l.sfeq r3,r0
+ l.bf itlb_tr_fill //_workaround
+ // Determine number of IMMU sets
+ l.mfspr r2, r0, SPR_IMMUCFGR
+ l.andi r2, r2, SPR_IMMUCFGR_NTS
+ l.srli r2, r2, SPR_IMMUCFGR_NTS_OFF
+ l.ori r3, r0, 0x1
+ l.sll r3, r3, r2 // r3 = number IMMU sets IMMUCFGR
+ l.addi r2, r3, -1 // r2 = nsets mask
+ l.mfspr r3, r0, SPR_EEAR_BASE
+ l.srli r3, r3, 0xd // >> PAGE_SHIFT
+ l.and r2, r3, r2 // calc offset: & (NUM_TLB_ENTRIES-1)
+
+/*
+ * __PHX__ :: fixme
+ * we should not just blindly set executable flags,
+ * but it does help with ping. the clean way would be to find out
+ * (and fix it) why stack doesn't have execution permissions
+ */
+
+itlb_tr_fill_workaround:
+ l.ori r4,r4,0xc0 // | (SPR_ITLBTR_UXE | ITLBTR_SXE)
+itlb_tr_fill:
+ l.mtspr r2,r4,SPR_ITLBTR_BASE(0)
+ /*
+ * fill DTLB MR register
+ */
+ l.slli r3, r3, 0xd /* << PAGE_SHIFT => EA & PAGE_MASK */
+ l.ori r4,r3,0x1 // set hardware valid bit: ITBL_MR entry
+ l.mtspr r2,r4,SPR_ITLBMR_BASE(0)
+
+ EXCEPTION_LOAD_GPR2
+ EXCEPTION_LOAD_GPR3
+ EXCEPTION_LOAD_GPR4
+ l.rfe
+
+i_pmd_none:
+i_pte_not_present:
+ EXCEPTION_LOAD_GPR2
+ EXCEPTION_LOAD_GPR3
+ EXCEPTION_LOAD_GPR4
+ EXCEPTION_HANDLE(_itlb_miss_page_fault_handler)
+
+/* ==============================================[ boot tlb handlers ]=== */
+
+
+/* =================================================[ debugging aids ]=== */
+
+/*
+ * DESC: Prints ASCII character stored in r7
+ *
+ * PRMS: r7 - a 32-bit value with an ASCII character in the first byte
+ * position.
+ *
+ * PREQ: The UART at UART_BASE_ADD has to be initialized
+ *
+ * POST: internally used but restores:
+ * r4 - to store UART_BASE_ADD
+ * r5 - for loading OFF_TXFULL / THRE,TEMT
+ * r6 - for storing bitmask (SERIAL_8250)
+ */
+ENTRY(_emergency_putc)
+ EMERGENCY_PRINT_STORE_GPR4
+ EMERGENCY_PRINT_STORE_GPR5
+ EMERGENCY_PRINT_STORE_GPR6
+
+ l.movhi r4,hi(UART_BASE_ADD)
+ l.ori r4,r4,lo(UART_BASE_ADD)
+
+#if defined(CONFIG_SERIAL_LITEUART)
+ /* Check OFF_TXFULL status */
+1: l.lwz r5,4(r4)
+ l.andi r5,r5,0xff
+ l.sfnei r5,0
+ l.bf 1b
+ l.nop
+
+ /* Write character */
+ l.andi r7,r7,0xff
+ l.sw 0(r4),r7
+#elif defined(CONFIG_SERIAL_8250)
+ /* Check UART LSR THRE (hold) bit */
+ l.addi r6,r0,0x20
+1: l.lbz r5,5(r4)
+ l.andi r5,r5,0x20
+ l.sfeq r5,r6
+ l.bnf 1b
+ l.nop
+
+ /* Write character */
+ l.sb 0(r4),r7
+
+ /* Check UART LSR THRE|TEMT (hold, empty) bits */
+ l.addi r6,r0,0x60
+1: l.lbz r5,5(r4)
+ l.andi r5,r5,0x60
+ l.sfeq r5,r6
+ l.bnf 1b
+ l.nop
+#endif
+ EMERGENCY_PRINT_LOAD_GPR6
+ EMERGENCY_PRINT_LOAD_GPR5
+ EMERGENCY_PRINT_LOAD_GPR4
+ l.jr r9
+ l.nop
+
+/*
+ * DSCR: prints a string referenced by r3.
+ *
+ * PRMS: r3 - address of the first character of null
+ * terminated string to be printed
+ *
+ * PREQ: UART at UART_BASE_ADD has to be initialized
+ *
+ * POST: caller should be aware that r3, r9 are changed
+ */
+ENTRY(_emergency_print)
+ EMERGENCY_PRINT_STORE_GPR7
+ EMERGENCY_PRINT_STORE_GPR9
+
+ /* Load character to r7, check for null terminator */
+2: l.lbz r7,0(r3)
+ l.sfeqi r7,0x0
+ l.bf 9f
+ l.nop
+
+ l.jal _emergency_putc
+ l.nop
+
+ /* next character */
+ l.j 2b
+ l.addi r3,r3,0x1
+
+9:
+ EMERGENCY_PRINT_LOAD_GPR9
+ EMERGENCY_PRINT_LOAD_GPR7
+ l.jr r9
+ l.nop
+
+/*
+ * DSCR: prints a number in r3 in hex.
+ *
+ * PRMS: r3 - a 32-bit unsigned integer
+ *
+ * PREQ: UART at UART_BASE_ADD has to be initialized
+ *
+ * POST: caller should be aware that r3, r9 are changed
+ */
+ENTRY(_emergency_print_nr)
+ EMERGENCY_PRINT_STORE_GPR7
+ EMERGENCY_PRINT_STORE_GPR8
+ EMERGENCY_PRINT_STORE_GPR9
+
+ l.addi r8,r0,32 // shift register
+
+1: /* remove leading zeros */
+ l.addi r8,r8,-0x4
+ l.srl r7,r3,r8
+ l.andi r7,r7,0xf
+
+ /* don't skip the last zero if number == 0x0 */
+ l.sfeqi r8,0x4
+ l.bf 2f
+ l.nop
+
+ l.sfeq r7,r0
+ l.bf 1b
+ l.nop
+
+2:
+ l.srl r7,r3,r8
+
+ l.andi r7,r7,0xf
+ l.sflts r8,r0
+ l.bf 9f
+
+ /* Numbers greater than 9 translate to a-f */
+ l.sfgtui r7,0x9
+ l.bnf 8f
+ l.nop
+ l.addi r7,r7,0x27
+
+ /* Convert to ascii and output character */
+8: l.jal _emergency_putc
+ l.addi r7,r7,0x30
+
+ /* next character */
+ l.j 2b
+ l.addi r8,r8,-0x4
+
+9:
+ EMERGENCY_PRINT_LOAD_GPR9
+ EMERGENCY_PRINT_LOAD_GPR8
+ EMERGENCY_PRINT_LOAD_GPR7
+ l.jr r9
+ l.nop
+
+/*
+ * This should be used for debugging only.
+ * It messes up the Linux early serial output
+ * somehow, so use it sparingly and essentially
+ * only if you need to debug something that goes wrong
+ * before Linux gets the early serial going.
+ *
+ * Furthermore, you'll have to make sure you set the
+ * UART_DEVISOR correctly according to the system
+ * clock rate.
+ *
+ *
+ */
+
+
+
+#define SYS_CLK 20000000
+//#define SYS_CLK 1843200
+#define OR32_CONSOLE_BAUD 115200
+#define UART_DIVISOR SYS_CLK/(16*OR32_CONSOLE_BAUD)
+
+ENTRY(_early_uart_init)
+ l.movhi r3,hi(UART_BASE_ADD)
+ l.ori r3,r3,lo(UART_BASE_ADD)
+
+#if defined(CONFIG_SERIAL_8250)
+ l.addi r4,r0,0x7
+ l.sb 0x2(r3),r4
+
+ l.addi r4,r0,0x0
+ l.sb 0x1(r3),r4
+
+ l.addi r4,r0,0x3
+ l.sb 0x3(r3),r4
+
+ l.lbz r5,3(r3)
+ l.ori r4,r5,0x80
+ l.sb 0x3(r3),r4
+ l.addi r4,r0,((UART_DIVISOR>>8) & 0x000000ff)
+ l.sb UART_DLM(r3),r4
+ l.addi r4,r0,((UART_DIVISOR) & 0x000000ff)
+ l.sb UART_DLL(r3),r4
+ l.sb 0x3(r3),r5
+#endif
+
+ l.jr r9
+ l.nop
+
+ .align 0x1000
+ .global _secondary_evbar
+_secondary_evbar:
+
+ .space 0x800
+ /* Just disable interrupts and Return */
+ l.ori r3,r0,SPR_SR_SM
+ l.mtspr r0,r3,SPR_ESR_BASE
+ l.rfe
+
+
+ .section .rodata
+_string_unhandled_exception:
+ .string "\r\nRunarunaround: Unhandled exception 0x\0"
+
+_string_epc_prefix:
+ .string ": EPC=0x\0"
+
+_string_nl:
+ .string "\r\n\0"
+
+
+/* ========================================[ page aligned structures ]=== */
+
+/*
+ * .data section should be page aligned
+ * (look into arch/openrisc/kernel/vmlinux.lds.S)
+ */
+ .section .data,"aw"
+ .align 8192
+ .global empty_zero_page
+empty_zero_page:
+ .space 8192
+
+ .global swapper_pg_dir
+swapper_pg_dir:
+ .space 8192
+
+ .global _unhandled_stack
+_unhandled_stack:
+ .space 8192
+_unhandled_stack_top:
+
+/* ============================================================[ EOF ]=== */
diff --git a/arch/openrisc/kernel/irq.c b/arch/openrisc/kernel/irq.c
new file mode 100644
index 0000000000..f38e10962a
--- /dev/null
+++ b/arch/openrisc/kernel/irq.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC irq.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/ftrace.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/export.h>
+#include <linux/irqflags.h>
+
+/* read interrupt enabled status */
+unsigned long arch_local_save_flags(void)
+{
+ return mfspr(SPR_SR) & (SPR_SR_IEE|SPR_SR_TEE);
+}
+EXPORT_SYMBOL(arch_local_save_flags);
+
+/* set interrupt enabled status */
+void arch_local_irq_restore(unsigned long flags)
+{
+ mtspr(SPR_SR, ((mfspr(SPR_SR) & ~(SPR_SR_IEE|SPR_SR_TEE)) | flags));
+}
+EXPORT_SYMBOL(arch_local_irq_restore);
+
+void __init init_IRQ(void)
+{
+ irqchip_init();
+}
diff --git a/arch/openrisc/kernel/module.c b/arch/openrisc/kernel/module.c
new file mode 100644
index 0000000000..532013f523
--- /dev/null
+++ b/arch/openrisc/kernel/module.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC module.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ unsigned int i;
+ Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+ Elf32_Sym *sym;
+ uint32_t *location;
+ uint32_t value;
+
+ pr_debug("Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ /* This is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rel[i].r_offset;
+
+ /* This is the symbol it is referring to. Note that all
+ undefined symbols have been resolved. */
+ sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(rel[i].r_info);
+ value = sym->st_value + rel[i].r_addend;
+
+ switch (ELF32_R_TYPE(rel[i].r_info)) {
+ case R_OR32_32:
+ *location = value;
+ break;
+ case R_OR32_CONST:
+ *((uint16_t *)location + 1) = value;
+ break;
+ case R_OR32_CONSTH:
+ *((uint16_t *)location + 1) = value >> 16;
+ break;
+ case R_OR32_JUMPTARG:
+ value -= (uint32_t)location;
+ value >>= 2;
+ value &= 0x03ffffff;
+ value |= *location & 0xfc000000;
+ *location = value;
+ break;
+ default:
+ pr_err("module %s: Unknown relocation: %u\n",
+ me->name, ELF32_R_TYPE(rel[i].r_info));
+ break;
+ }
+ }
+
+ return 0;
+}
diff --git a/arch/openrisc/kernel/or32_ksyms.c b/arch/openrisc/kernel/or32_ksyms.c
new file mode 100644
index 0000000000..212e5f8500
--- /dev/null
+++ b/arch/openrisc/kernel/or32_ksyms.c
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC or32_ksyms.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#include <linux/export.h>
+#include <linux/elfcore.h>
+#include <linux/sched.h>
+#include <linux/in6.h>
+#include <linux/interrupt.h>
+#include <linux/vmalloc.h>
+#include <linux/semaphore.h>
+#include <linux/pgtable.h>
+
+#include <asm/processor.h>
+#include <linux/uaccess.h>
+#include <asm/checksum.h>
+#include <asm/io.h>
+#include <asm/hardirq.h>
+#include <asm/delay.h>
+
+#define DECLARE_EXPORT(name) extern void name(void); EXPORT_SYMBOL(name)
+
+/* compiler generated symbols */
+DECLARE_EXPORT(__udivsi3);
+DECLARE_EXPORT(__divsi3);
+DECLARE_EXPORT(__umodsi3);
+DECLARE_EXPORT(__modsi3);
+DECLARE_EXPORT(__muldi3);
+DECLARE_EXPORT(__ashrdi3);
+DECLARE_EXPORT(__ashldi3);
+DECLARE_EXPORT(__lshrdi3);
+DECLARE_EXPORT(__ucmpdi2);
+
+EXPORT_SYMBOL(empty_zero_page);
+EXPORT_SYMBOL(__copy_tofrom_user);
+EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(memset);
diff --git a/arch/openrisc/kernel/process.c b/arch/openrisc/kernel/process.c
new file mode 100644
index 0000000000..86e02929f3
--- /dev/null
+++ b/arch/openrisc/kernel/process.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC process.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * This file handles the architecture-dependent parts of process handling...
+ */
+
+#define __KERNEL_SYSCALLS__
+#include <linux/cpu.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/task.h>
+#include <linux/sched/task_stack.h>
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/elfcore.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/init_task.h>
+#include <linux/mqueue.h>
+#include <linux/fs.h>
+#include <linux/reboot.h>
+
+#include <linux/uaccess.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/spr_defs.h>
+#include <asm/switch_to.h>
+
+#include <linux/smp.h>
+
+/*
+ * Pointer to Current thread info structure.
+ *
+ * Used at user space -> kernel transitions.
+ */
+struct thread_info *current_thread_info_set[NR_CPUS] = { &init_thread_info, };
+
+void machine_restart(char *cmd)
+{
+ do_kernel_restart(cmd);
+
+ __asm__("l.nop 13");
+
+ /* Give a grace period for failure to restart of 1s */
+ mdelay(1000);
+
+ /* Whoops - the platform was unable to reboot. Tell the user! */
+ pr_emerg("Reboot failed -- System halted\n");
+ while (1);
+}
+
+/*
+ * This is used if pm_power_off has not been set by a power management
+ * driver, in this case we can assume we are on a simulator. On
+ * OpenRISC simulators l.nop 1 will trigger the simulator exit.
+ */
+static void default_power_off(void)
+{
+ __asm__("l.nop 1");
+}
+
+/*
+ * Similar to machine_power_off, but don't shut off power. Add code
+ * here to freeze the system for e.g. post-mortem debug purpose when
+ * possible. This halt has nothing to do with the idle halt.
+ */
+void machine_halt(void)
+{
+ printk(KERN_INFO "*** MACHINE HALT ***\n");
+ __asm__("l.nop 1");
+}
+
+/* If or when software power-off is implemented, add code here. */
+void machine_power_off(void)
+{
+ printk(KERN_INFO "*** MACHINE POWER OFF ***\n");
+ if (pm_power_off != NULL)
+ pm_power_off();
+ else
+ default_power_off();
+}
+
+/*
+ * Send the doze signal to the cpu if available.
+ * Make sure, that all interrupts are enabled
+ */
+void arch_cpu_idle(void)
+{
+ raw_local_irq_enable();
+ if (mfspr(SPR_UPR) & SPR_UPR_PMP)
+ mtspr(SPR_PMR, mfspr(SPR_PMR) | SPR_PMR_DME);
+ raw_local_irq_disable();
+}
+
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
+/*
+ * When a process does an "exec", machine state like FPU and debug
+ * registers need to be reset. This is a hook function for that.
+ * Currently we don't have any such state to reset, so this is empty.
+ */
+void flush_thread(void)
+{
+}
+
+void show_regs(struct pt_regs *regs)
+{
+ show_regs_print_info(KERN_DEFAULT);
+ /* __PHX__ cleanup this mess */
+ show_registers(regs);
+}
+
+/*
+ * Copy the thread-specific (arch specific) info from the current
+ * process to the new one p
+ */
+extern asmlinkage void ret_from_fork(void);
+
+/*
+ * copy_thread
+ * @clone_flags: flags
+ * @usp: user stack pointer or fn for kernel thread
+ * @arg: arg to fn for kernel thread; always NULL for userspace thread
+ * @p: the newly created task
+ * @tls: the Thread Local Storage pointer for the new process
+ *
+ * At the top of a newly initialized kernel stack are two stacked pt_reg
+ * structures. The first (topmost) is the userspace context of the thread.
+ * The second is the kernelspace context of the thread.
+ *
+ * A kernel thread will not be returning to userspace, so the topmost pt_regs
+ * struct can be uninitialized; it _does_ need to exist, though, because
+ * a kernel thread can become a userspace thread by doing a kernel_execve, in
+ * which case the topmost context will be initialized and used for 'returning'
+ * to userspace.
+ *
+ * The second pt_reg struct needs to be initialized to 'return' to
+ * ret_from_fork. A kernel thread will need to set r20 to the address of
+ * a function to call into (with arg in r22); userspace threads need to set
+ * r20 to NULL in which case ret_from_fork will just continue a return to
+ * userspace.
+ *
+ * A kernel thread 'fn' may return; this is effectively what happens when
+ * kernel_execve is called. In that case, the userspace pt_regs must have
+ * been initialized (which kernel_execve takes care of, see start_thread
+ * below); ret_from_fork will then continue its execution causing the
+ * 'kernel thread' to return to userspace as a userspace thread.
+ */
+
+int
+copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
+{
+ unsigned long clone_flags = args->flags;
+ unsigned long usp = args->stack;
+ unsigned long tls = args->tls;
+ struct pt_regs *userregs;
+ struct pt_regs *kregs;
+ unsigned long sp = (unsigned long)task_stack_page(p) + THREAD_SIZE;
+ unsigned long top_of_kernel_stack;
+
+ top_of_kernel_stack = sp;
+
+ /* Locate userspace context on stack... */
+ sp -= STACK_FRAME_OVERHEAD; /* redzone */
+ sp -= sizeof(struct pt_regs);
+ userregs = (struct pt_regs *) sp;
+
+ /* ...and kernel context */
+ sp -= STACK_FRAME_OVERHEAD; /* redzone */
+ sp -= sizeof(struct pt_regs);
+ kregs = (struct pt_regs *)sp;
+
+ if (unlikely(args->fn)) {
+ memset(kregs, 0, sizeof(struct pt_regs));
+ kregs->gpr[20] = (unsigned long)args->fn;
+ kregs->gpr[22] = (unsigned long)args->fn_arg;
+ } else {
+ *userregs = *current_pt_regs();
+
+ if (usp)
+ userregs->sp = usp;
+
+ /*
+ * For CLONE_SETTLS set "tp" (r10) to the TLS pointer.
+ */
+ if (clone_flags & CLONE_SETTLS)
+ userregs->gpr[10] = tls;
+
+ userregs->gpr[11] = 0; /* Result from fork() */
+
+ kregs->gpr[20] = 0; /* Userspace thread */
+ }
+
+ /*
+ * _switch wants the kernel stack page in pt_regs->sp so that it
+ * can restore it to thread_info->ksp... see _switch for details.
+ */
+ kregs->sp = top_of_kernel_stack;
+ kregs->gpr[9] = (unsigned long)ret_from_fork;
+
+ task_thread_info(p)->ksp = (unsigned long)kregs;
+
+ return 0;
+}
+
+/*
+ * Set up a thread for executing a new program
+ */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp)
+{
+ unsigned long sr = mfspr(SPR_SR) & ~SPR_SR_SM;
+
+ memset(regs, 0, sizeof(struct pt_regs));
+
+ regs->pc = pc;
+ regs->sr = sr;
+ regs->sp = sp;
+}
+
+extern struct thread_info *_switch(struct thread_info *old_ti,
+ struct thread_info *new_ti);
+extern int lwa_flag;
+
+struct task_struct *__switch_to(struct task_struct *old,
+ struct task_struct *new)
+{
+ struct task_struct *last;
+ struct thread_info *new_ti, *old_ti;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /* current_set is an array of saved current pointers
+ * (one for each cpu). we need them at user->kernel transition,
+ * while we save them at kernel->user transition
+ */
+ new_ti = new->stack;
+ old_ti = old->stack;
+
+ lwa_flag = 0;
+
+ current_thread_info_set[smp_processor_id()] = new_ti;
+ last = (_switch(old_ti, new_ti))->task;
+
+ local_irq_restore(flags);
+
+ return last;
+}
+
+/*
+ * Write out registers in core dump format, as defined by the
+ * struct user_regs_struct
+ */
+void dump_elf_thread(elf_greg_t *dest, struct pt_regs* regs)
+{
+ dest[0] = 0; /* r0 */
+ memcpy(dest+1, regs->gpr+1, 31*sizeof(unsigned long));
+ dest[32] = regs->pc;
+ dest[33] = regs->sr;
+ dest[34] = 0;
+ dest[35] = 0;
+}
+
+unsigned long __get_wchan(struct task_struct *p)
+{
+ /* TODO */
+
+ return 0;
+}
diff --git a/arch/openrisc/kernel/prom.c b/arch/openrisc/kernel/prom.c
new file mode 100644
index 0000000000..19e6008bf1
--- /dev/null
+++ b/arch/openrisc/kernel/prom.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC prom.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * Architecture specific procedures for creating, accessing and
+ * interpreting the device tree.
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/memblock.h>
+#include <linux/of_fdt.h>
+
+#include <asm/page.h>
+
+void __init early_init_devtree(void *params)
+{
+ early_init_dt_scan(params);
+ memblock_allow_resize();
+}
diff --git a/arch/openrisc/kernel/ptrace.c b/arch/openrisc/kernel/ptrace.c
new file mode 100644
index 0000000000..1eeac3b62e
--- /dev/null
+++ b/arch/openrisc/kernel/ptrace.c
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC ptrace.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2005 Gyorgy Jeney <nog@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+#include <linux/string.h>
+
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/audit.h>
+#include <linux/regset.h>
+#include <linux/elf.h>
+
+#include <asm/thread_info.h>
+#include <asm/page.h>
+
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs);
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs);
+
+/*
+ * Copy the thread state to a regset that can be interpreted by userspace.
+ *
+ * It doesn't matter what our internal pt_regs structure looks like. The
+ * important thing is that we export a consistent view of the thread state
+ * to userspace. As such, we need to make sure that the regset remains
+ * ABI compatible as defined by the struct user_regs_struct:
+ *
+ * (Each item is a 32-bit word)
+ * r0 = 0 (exported for clarity)
+ * 31 GPRS r1-r31
+ * PC (Program counter)
+ * SR (Supervision register)
+ */
+static int genregs_get(struct task_struct *target,
+ const struct user_regset *regset,
+ struct membuf to)
+{
+ const struct pt_regs *regs = task_pt_regs(target);
+
+ /* r0 */
+ membuf_zero(&to, 4);
+ membuf_write(&to, regs->gpr + 1, 31 * 4);
+ membuf_store(&to, regs->pc);
+ return membuf_store(&to, regs->sr);
+}
+
+/*
+ * Set the thread state from a regset passed in via ptrace
+ */
+static int genregs_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user * ubuf)
+{
+ struct pt_regs *regs = task_pt_regs(target);
+ int ret;
+
+ /* ignore r0 */
+ user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, 0, 4);
+ /* r1 - r31 */
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ regs->gpr+1, 4, 4*32);
+ /* PC */
+ if (!ret)
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &regs->pc, 4*32, 4*33);
+ /*
+ * Skip SR and padding... userspace isn't allowed to changes bits in
+ * the Supervision register
+ */
+ if (!ret)
+ user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, 4*33, -1);
+
+ return ret;
+}
+
+/*
+ * As OpenRISC shares GPRs and floating point registers we don't need to export
+ * the floating point registers again. So here we only export the fpcsr special
+ * purpose register.
+ */
+static int fpregs_get(struct task_struct *target,
+ const struct user_regset *regset,
+ struct membuf to)
+{
+ const struct pt_regs *regs = task_pt_regs(target);
+
+ return membuf_store(&to, regs->fpcsr);
+}
+
+static int fpregs_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ struct pt_regs *regs = task_pt_regs(target);
+ int ret;
+
+ /* FPCSR */
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &regs->fpcsr, 0, 4);
+ return ret;
+}
+
+/*
+ * Define the register sets available on OpenRISC under Linux
+ */
+enum or1k_regset {
+ REGSET_GENERAL,
+ REGSET_FPU,
+};
+
+static const struct user_regset or1k_regsets[] = {
+ [REGSET_GENERAL] = {
+ .core_note_type = NT_PRSTATUS,
+ .n = ELF_NGREG,
+ .size = sizeof(long),
+ .align = sizeof(long),
+ .regset_get = genregs_get,
+ .set = genregs_set,
+ },
+ [REGSET_FPU] = {
+ .core_note_type = NT_PRFPREG,
+ .n = sizeof(struct __or1k_fpu_state) / sizeof(long),
+ .size = sizeof(long),
+ .align = sizeof(long),
+ .regset_get = fpregs_get,
+ .set = fpregs_set,
+ },
+};
+
+static const struct user_regset_view user_or1k_native_view = {
+ .name = "or1k",
+ .e_machine = EM_OPENRISC,
+ .regsets = or1k_regsets,
+ .n = ARRAY_SIZE(or1k_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+ return &user_or1k_native_view;
+}
+
+/*
+ * does not yet catch signals sent when the child dies.
+ * in exit.c or in signal.c.
+ */
+
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure the single step bit is not set.
+ */
+void ptrace_disable(struct task_struct *child)
+{
+ pr_debug("ptrace_disable(): TODO\n");
+
+ user_disable_single_step(child);
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+}
+
+long arch_ptrace(struct task_struct *child, long request, unsigned long addr,
+ unsigned long data)
+{
+ int ret;
+
+ switch (request) {
+ default:
+ ret = ptrace_request(child, request, addr, data);
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * Notification of system call entry/exit
+ * - triggered by current->work.syscall_trace
+ */
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
+{
+ long ret = 0;
+
+ if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+ ptrace_report_syscall_entry(regs))
+ /*
+ * Tracing decided this syscall should not happen.
+ * We'll return a bogus call number to get an ENOSYS
+ * error, but leave the original number in <something>.
+ */
+ ret = -1L;
+
+ audit_syscall_entry(regs->gpr[11], regs->gpr[3], regs->gpr[4],
+ regs->gpr[5], regs->gpr[6]);
+
+ return ret ? : regs->gpr[11];
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+ int step;
+
+ audit_syscall_exit(regs);
+
+ step = test_thread_flag(TIF_SINGLESTEP);
+ if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+ ptrace_report_syscall_exit(regs, step);
+}
diff --git a/arch/openrisc/kernel/setup.c b/arch/openrisc/kernel/setup.c
new file mode 100644
index 0000000000..9cf7fb6044
--- /dev/null
+++ b/arch/openrisc/kernel/setup.c
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC setup.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * This file handles the architecture-dependent parts of initialization
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/memblock.h>
+#include <linux/seq_file.h>
+#include <linux/serial.h>
+#include <linux/initrd.h>
+#include <linux/of_fdt.h>
+#include <linux/of.h>
+#include <linux/device.h>
+
+#include <asm/sections.h>
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/cpuinfo.h>
+#include <asm/delay.h>
+
+#include "vmlinux.h"
+
+static void __init setup_memory(void)
+{
+ unsigned long ram_start_pfn;
+ unsigned long ram_end_pfn;
+ phys_addr_t memory_start, memory_end;
+
+ memory_end = memory_start = 0;
+
+ /* Find main memory where is the kernel, we assume its the only one */
+ memory_start = memblock_start_of_DRAM();
+ memory_end = memblock_end_of_DRAM();
+
+ if (!memory_end) {
+ panic("No memory!");
+ }
+
+ ram_start_pfn = PFN_UP(memory_start);
+ ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM());
+
+ /* setup bootmem globals (we use no_bootmem, but mm still depends on this) */
+ min_low_pfn = ram_start_pfn;
+ max_low_pfn = ram_end_pfn;
+ max_pfn = ram_end_pfn;
+
+ /*
+ * initialize the boot-time allocator (with low memory only).
+ *
+ * This makes the memory from the end of the kernel to the end of
+ * RAM usable.
+ */
+ memblock_reserve(__pa(_stext), _end - _stext);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ /* Then reserve the initrd, if any */
+ if (initrd_start && (initrd_end > initrd_start)) {
+ unsigned long aligned_start = ALIGN_DOWN(initrd_start, PAGE_SIZE);
+ unsigned long aligned_end = ALIGN(initrd_end, PAGE_SIZE);
+
+ memblock_reserve(__pa(aligned_start), aligned_end - aligned_start);
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+ early_init_fdt_reserve_self();
+ early_init_fdt_scan_reserved_mem();
+
+ memblock_dump_all();
+}
+
+struct cpuinfo_or1k cpuinfo_or1k[NR_CPUS];
+
+static void print_cpuinfo(void)
+{
+ unsigned long upr = mfspr(SPR_UPR);
+ unsigned long vr = mfspr(SPR_VR);
+ unsigned int version;
+ unsigned int revision;
+ struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()];
+
+ version = (vr & SPR_VR_VER) >> 24;
+ revision = (vr & SPR_VR_REV);
+
+ printk(KERN_INFO "CPU: OpenRISC-%x (revision %d) @%d MHz\n",
+ version, revision, cpuinfo->clock_frequency / 1000000);
+
+ if (!(upr & SPR_UPR_UP)) {
+ printk(KERN_INFO
+ "-- no UPR register... unable to detect configuration\n");
+ return;
+ }
+
+ if (upr & SPR_UPR_DCP)
+ printk(KERN_INFO
+ "-- dcache: %4d bytes total, %2d bytes/line, %d way(s)\n",
+ cpuinfo->dcache_size, cpuinfo->dcache_block_size,
+ cpuinfo->dcache_ways);
+ else
+ printk(KERN_INFO "-- dcache disabled\n");
+ if (upr & SPR_UPR_ICP)
+ printk(KERN_INFO
+ "-- icache: %4d bytes total, %2d bytes/line, %d way(s)\n",
+ cpuinfo->icache_size, cpuinfo->icache_block_size,
+ cpuinfo->icache_ways);
+ else
+ printk(KERN_INFO "-- icache disabled\n");
+
+ if (upr & SPR_UPR_DMP)
+ printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n",
+ 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
+ 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
+ if (upr & SPR_UPR_IMP)
+ printk(KERN_INFO "-- immu: %4d entries, %lu way(s)\n",
+ 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
+ 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
+
+ printk(KERN_INFO "-- additional features:\n");
+ if (upr & SPR_UPR_DUP)
+ printk(KERN_INFO "-- debug unit\n");
+ if (upr & SPR_UPR_PCUP)
+ printk(KERN_INFO "-- performance counters\n");
+ if (upr & SPR_UPR_PMP)
+ printk(KERN_INFO "-- power management\n");
+ if (upr & SPR_UPR_PICP)
+ printk(KERN_INFO "-- PIC\n");
+ if (upr & SPR_UPR_TTP)
+ printk(KERN_INFO "-- timer\n");
+ if (upr & SPR_UPR_CUP)
+ printk(KERN_INFO "-- custom unit(s)\n");
+}
+
+void __init setup_cpuinfo(void)
+{
+ struct device_node *cpu;
+ unsigned long iccfgr, dccfgr;
+ unsigned long cache_set_size;
+ int cpu_id = smp_processor_id();
+ struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[cpu_id];
+
+ cpu = of_get_cpu_node(cpu_id, NULL);
+ if (!cpu)
+ panic("Couldn't find CPU%d in device tree...\n", cpu_id);
+
+ iccfgr = mfspr(SPR_ICCFGR);
+ cpuinfo->icache_ways = 1 << (iccfgr & SPR_ICCFGR_NCW);
+ cache_set_size = 1 << ((iccfgr & SPR_ICCFGR_NCS) >> 3);
+ cpuinfo->icache_block_size = 16 << ((iccfgr & SPR_ICCFGR_CBS) >> 7);
+ cpuinfo->icache_size =
+ cache_set_size * cpuinfo->icache_ways * cpuinfo->icache_block_size;
+
+ dccfgr = mfspr(SPR_DCCFGR);
+ cpuinfo->dcache_ways = 1 << (dccfgr & SPR_DCCFGR_NCW);
+ cache_set_size = 1 << ((dccfgr & SPR_DCCFGR_NCS) >> 3);
+ cpuinfo->dcache_block_size = 16 << ((dccfgr & SPR_DCCFGR_CBS) >> 7);
+ cpuinfo->dcache_size =
+ cache_set_size * cpuinfo->dcache_ways * cpuinfo->dcache_block_size;
+
+ if (of_property_read_u32(cpu, "clock-frequency",
+ &cpuinfo->clock_frequency)) {
+ printk(KERN_WARNING
+ "Device tree missing CPU 'clock-frequency' parameter."
+ "Assuming frequency 25MHZ"
+ "This is probably not what you want.");
+ }
+
+ cpuinfo->coreid = mfspr(SPR_COREID);
+
+ of_node_put(cpu);
+
+ print_cpuinfo();
+}
+
+/**
+ * or1k_early_setup
+ * @fdt: pointer to the start of the device tree in memory or NULL
+ *
+ * Handles the pointer to the device tree that this kernel is to use
+ * for establishing the available platform devices.
+ *
+ * Falls back on built-in device tree in case null pointer is passed.
+ */
+
+void __init or1k_early_setup(void *fdt)
+{
+ if (fdt)
+ pr_info("FDT at %p\n", fdt);
+ else {
+ fdt = __dtb_start;
+ pr_info("Compiled-in FDT at %p\n", fdt);
+ }
+ early_init_devtree(fdt);
+}
+
+static inline unsigned long extract_value_bits(unsigned long reg,
+ short bit_nr, short width)
+{
+ return (reg >> bit_nr) & (0 << width);
+}
+
+static inline unsigned long extract_value(unsigned long reg, unsigned long mask)
+{
+ while (!(mask & 0x1)) {
+ reg = reg >> 1;
+ mask = mask >> 1;
+ }
+ return mask & reg;
+}
+
+/*
+ * calibrate_delay
+ *
+ * Lightweight calibrate_delay implementation that calculates loops_per_jiffy
+ * from the clock frequency passed in via the device tree
+ *
+ */
+
+void calibrate_delay(void)
+{
+ const int *val;
+ struct device_node *cpu = of_get_cpu_node(smp_processor_id(), NULL);
+
+ val = of_get_property(cpu, "clock-frequency", NULL);
+ if (!val)
+ panic("no cpu 'clock-frequency' parameter in device tree");
+ loops_per_jiffy = *val / HZ;
+ pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
+ loops_per_jiffy / (500000 / HZ),
+ (loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
+
+ of_node_put(cpu);
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+ unflatten_and_copy_device_tree();
+
+ setup_cpuinfo();
+
+#ifdef CONFIG_SMP
+ smp_init_cpus();
+#endif
+
+ /* process 1's initial memory region is the kernel code/data */
+ setup_initial_init_mm(_stext, _etext, _edata, _end);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start == initrd_end) {
+ printk(KERN_INFO "Initial ramdisk not found\n");
+ initrd_start = 0;
+ initrd_end = 0;
+ } else {
+ printk(KERN_INFO "Initial ramdisk at: 0x%p (%lu bytes)\n",
+ (void *)(initrd_start), initrd_end - initrd_start);
+ initrd_below_start_ok = 1;
+ }
+#endif
+
+ /* setup memblock allocator */
+ setup_memory();
+
+ /* paging_init() sets up the MMU and marks all pages as reserved */
+ paging_init();
+
+ *cmdline_p = boot_command_line;
+
+ printk(KERN_INFO "OpenRISC Linux -- http://openrisc.io\n");
+}
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ unsigned int vr, cpucfgr;
+ unsigned int avr;
+ unsigned int version;
+ struct cpuinfo_or1k *cpuinfo = v;
+
+ vr = mfspr(SPR_VR);
+ cpucfgr = mfspr(SPR_CPUCFGR);
+
+#ifdef CONFIG_SMP
+ seq_printf(m, "processor\t\t: %d\n", cpuinfo->coreid);
+#endif
+ if (vr & SPR_VR_UVRP) {
+ vr = mfspr(SPR_VR2);
+ version = vr & SPR_VR2_VER;
+ avr = mfspr(SPR_AVR);
+ seq_printf(m, "cpu architecture\t: "
+ "OpenRISC 1000 (%d.%d-rev%d)\n",
+ (avr >> 24) & 0xff,
+ (avr >> 16) & 0xff,
+ (avr >> 8) & 0xff);
+ seq_printf(m, "cpu implementation id\t: 0x%x\n",
+ (vr & SPR_VR2_CPUID) >> 24);
+ seq_printf(m, "cpu version\t\t: 0x%x\n", version);
+ } else {
+ version = (vr & SPR_VR_VER) >> 24;
+ seq_printf(m, "cpu\t\t\t: OpenRISC-%x\n", version);
+ seq_printf(m, "revision\t\t: %d\n", vr & SPR_VR_REV);
+ }
+ seq_printf(m, "frequency\t\t: %ld\n", loops_per_jiffy * HZ);
+ seq_printf(m, "dcache size\t\t: %d bytes\n", cpuinfo->dcache_size);
+ seq_printf(m, "dcache block size\t: %d bytes\n",
+ cpuinfo->dcache_block_size);
+ seq_printf(m, "dcache ways\t\t: %d\n", cpuinfo->dcache_ways);
+ seq_printf(m, "icache size\t\t: %d bytes\n", cpuinfo->icache_size);
+ seq_printf(m, "icache block size\t: %d bytes\n",
+ cpuinfo->icache_block_size);
+ seq_printf(m, "icache ways\t\t: %d\n", cpuinfo->icache_ways);
+ seq_printf(m, "immu\t\t\t: %d entries, %lu ways\n",
+ 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
+ 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
+ seq_printf(m, "dmmu\t\t\t: %d entries, %lu ways\n",
+ 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
+ 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
+ seq_printf(m, "bogomips\t\t: %lu.%02lu\n",
+ (loops_per_jiffy * HZ) / 500000,
+ ((loops_per_jiffy * HZ) / 5000) % 100);
+
+ seq_puts(m, "features\t\t: ");
+ seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OB32S ? "orbis32" : "");
+ seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OB64S ? "orbis64" : "");
+ seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OF32S ? "orfpx32" : "");
+ seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OF64S ? "orfpx64" : "");
+ seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OV64S ? "orvdx64" : "");
+ seq_puts(m, "\n");
+
+ seq_puts(m, "\n");
+
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ *pos = cpumask_next(*pos - 1, cpu_online_mask);
+ if ((*pos) < nr_cpu_ids)
+ return &cpuinfo_or1k[*pos];
+ return NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ (*pos)++;
+ return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
diff --git a/arch/openrisc/kernel/signal.c b/arch/openrisc/kernel/signal.c
new file mode 100644
index 0000000000..e2f21a5d8a
--- /dev/null
+++ b/arch/openrisc/kernel/signal.c
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC signal.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/resume_user_mode.h>
+
+#include <asm/processor.h>
+#include <asm/syscall.h>
+#include <asm/ucontext.h>
+#include <linux/uaccess.h>
+
+struct rt_sigframe {
+ struct siginfo info;
+ struct ucontext uc;
+ unsigned char retcode[16]; /* trampoline code */
+};
+
+asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs);
+
+asmlinkage int do_work_pending(struct pt_regs *regs, unsigned int thread_flags,
+ int syscall);
+
+static int restore_sigcontext(struct pt_regs *regs,
+ struct sigcontext __user *sc)
+{
+ int err = 0;
+
+ /* Always make any pending restarted system calls return -EINTR */
+ current->restart_block.fn = do_no_restart_syscall;
+
+ /*
+ * Restore the regs from &sc->regs.
+ * (sc is already checked since the sigframe was
+ * checked in sys_sigreturn previously)
+ */
+ err |= __copy_from_user(regs, sc->regs.gpr, 32 * sizeof(unsigned long));
+ err |= __copy_from_user(&regs->pc, &sc->regs.pc, sizeof(unsigned long));
+ err |= __copy_from_user(&regs->sr, &sc->regs.sr, sizeof(unsigned long));
+ err |= __copy_from_user(&regs->fpcsr, &sc->fpcsr, sizeof(unsigned long));
+
+ /* make sure the SM-bit is cleared so user-mode cannot fool us */
+ regs->sr &= ~SPR_SR_SM;
+
+ regs->orig_gpr11 = -1; /* Avoid syscall restart checks */
+
+ /* TODO: the other ports use regs->orig_XX to disable syscall checks
+ * after this completes, but we don't use that mechanism. maybe we can
+ * use it now ?
+ */
+
+ return err;
+}
+
+asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs)
+{
+ struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->sp;
+ sigset_t set;
+
+ /*
+ * Since we stacked the signal on a dword boundary,
+ * then frame should be dword aligned here. If it's
+ * not, then the user is trying to mess with us.
+ */
+ if (((unsigned long)frame) & 3)
+ goto badframe;
+
+ if (!access_ok(frame, sizeof(*frame)))
+ goto badframe;
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ set_current_blocked(&set);
+
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
+ goto badframe;
+
+ if (restore_altstack(&frame->uc.uc_stack))
+ goto badframe;
+
+ return regs->gpr[11];
+
+badframe:
+ force_sig(SIGSEGV);
+ return 0;
+}
+
+/*
+ * Set up a signal frame.
+ */
+
+static int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+ int err = 0;
+
+ /* copy the regs */
+ /* There should be no need to save callee-saved registers here...
+ * ...but we save them anyway. Revisit this
+ */
+ err |= __copy_to_user(sc->regs.gpr, regs, 32 * sizeof(unsigned long));
+ err |= __copy_to_user(&sc->regs.pc, &regs->pc, sizeof(unsigned long));
+ err |= __copy_to_user(&sc->regs.sr, &regs->sr, sizeof(unsigned long));
+ err |= __copy_to_user(&sc->fpcsr, &regs->fpcsr, sizeof(unsigned long));
+
+ return err;
+}
+
+static inline unsigned long align_sigframe(unsigned long sp)
+{
+ return sp & ~3UL;
+}
+
+/*
+ * Work out where the signal frame should go. It's either on the user stack
+ * or the alternate stack.
+ */
+
+static inline void __user *get_sigframe(struct ksignal *ksig,
+ struct pt_regs *regs, size_t frame_size)
+{
+ unsigned long sp = regs->sp;
+
+ /* redzone */
+ sp -= STACK_FRAME_OVERHEAD;
+ sp = sigsp(sp, ksig);
+ sp = align_sigframe(sp - frame_size);
+
+ return (void __user *)sp;
+}
+
+/* grab and setup a signal frame.
+ *
+ * basically we stack a lot of state info, and arrange for the
+ * user-mode program to return to the kernel using either a
+ * trampoline which performs the syscall sigreturn, or a provided
+ * user-mode trampoline.
+ */
+static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
+ struct pt_regs *regs)
+{
+ struct rt_sigframe __user *frame;
+ unsigned long return_ip;
+ int err = 0;
+
+ frame = get_sigframe(ksig, regs, sizeof(*frame));
+
+ if (!access_ok(frame, sizeof(*frame)))
+ return -EFAULT;
+
+ /* Create siginfo. */
+ if (ksig->ka.sa.sa_flags & SA_SIGINFO)
+ err |= copy_siginfo_to_user(&frame->info, &ksig->info);
+
+ /* Create the ucontext. */
+ err |= __put_user(0, &frame->uc.uc_flags);
+ err |= __put_user(NULL, &frame->uc.uc_link);
+ err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
+ err |= setup_sigcontext(regs, &frame->uc.uc_mcontext);
+
+ err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+ if (err)
+ return -EFAULT;
+
+ /* trampoline - the desired return ip is the retcode itself */
+ return_ip = (unsigned long)&frame->retcode;
+ /* This is:
+ l.ori r11,r0,__NR_sigreturn
+ l.sys 1
+ */
+ err |= __put_user(0xa960, (short __user *)(frame->retcode + 0));
+ err |= __put_user(__NR_rt_sigreturn, (short __user *)(frame->retcode + 2));
+ err |= __put_user(0x20000001, (unsigned long __user *)(frame->retcode + 4));
+ err |= __put_user(0x15000000, (unsigned long __user *)(frame->retcode + 8));
+
+ if (err)
+ return -EFAULT;
+
+ /* Set up registers for signal handler */
+ regs->pc = (unsigned long)ksig->ka.sa.sa_handler; /* what we enter NOW */
+ regs->gpr[9] = (unsigned long)return_ip; /* what we enter LATER */
+ regs->gpr[3] = (unsigned long)ksig->sig; /* arg 1: signo */
+ regs->gpr[4] = (unsigned long)&frame->info; /* arg 2: (siginfo_t*) */
+ regs->gpr[5] = (unsigned long)&frame->uc; /* arg 3: ucontext */
+
+ /* actually move the usp to reflect the stacked frame */
+ regs->sp = (unsigned long)frame;
+
+ return 0;
+}
+
+static inline void
+handle_signal(struct ksignal *ksig, struct pt_regs *regs)
+{
+ int ret;
+
+ ret = setup_rt_frame(ksig, sigmask_to_save(), regs);
+
+ signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Also note that the regs structure given here as an argument, is the latest
+ * pushed pt_regs. It may or may not be the same as the first pushed registers
+ * when the initial usermode->kernelmode transition took place. Therefore
+ * we can use user_mode(regs) to see if we came directly from kernel or user
+ * mode below.
+ */
+
+static int do_signal(struct pt_regs *regs, int syscall)
+{
+ struct ksignal ksig;
+ unsigned long continue_addr = 0;
+ unsigned long restart_addr = 0;
+ unsigned long retval = 0;
+ int restart = 0;
+
+ if (syscall) {
+ continue_addr = regs->pc;
+ restart_addr = continue_addr - 4;
+ retval = regs->gpr[11];
+
+ /*
+ * Setup syscall restart here so that a debugger will
+ * see the already changed PC.
+ */
+ switch (retval) {
+ case -ERESTART_RESTARTBLOCK:
+ restart = -2;
+ fallthrough;
+ case -ERESTARTNOHAND:
+ case -ERESTARTSYS:
+ case -ERESTARTNOINTR:
+ restart++;
+ regs->gpr[11] = regs->orig_gpr11;
+ regs->pc = restart_addr;
+ break;
+ }
+ }
+
+ /*
+ * Get the signal to deliver. During the call to get_signal the
+ * debugger may change all our registers so we may need to revert
+ * the decision to restart the syscall; specifically, if the PC is
+ * changed, don't restart the syscall.
+ */
+ if (get_signal(&ksig)) {
+ if (unlikely(restart) && regs->pc == restart_addr) {
+ if (retval == -ERESTARTNOHAND ||
+ retval == -ERESTART_RESTARTBLOCK
+ || (retval == -ERESTARTSYS
+ && !(ksig.ka.sa.sa_flags & SA_RESTART))) {
+ /* No automatic restart */
+ regs->gpr[11] = -EINTR;
+ regs->pc = continue_addr;
+ }
+ }
+ handle_signal(&ksig, regs);
+ } else {
+ /* no handler */
+ restore_saved_sigmask();
+ /*
+ * Restore pt_regs PC as syscall restart will be handled by
+ * kernel without return to userspace
+ */
+ if (unlikely(restart) && regs->pc == restart_addr) {
+ regs->pc = continue_addr;
+ return restart;
+ }
+ }
+
+ return 0;
+}
+
+asmlinkage int
+do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall)
+{
+ do {
+ if (likely(thread_flags & _TIF_NEED_RESCHED)) {
+ schedule();
+ } else {
+ if (unlikely(!user_mode(regs)))
+ return 0;
+ local_irq_enable();
+ if (thread_flags & (_TIF_SIGPENDING|_TIF_NOTIFY_SIGNAL)) {
+ int restart = do_signal(regs, syscall);
+ if (unlikely(restart)) {
+ /*
+ * Restart without handlers.
+ * Deal with it without leaving
+ * the kernel space.
+ */
+ return restart;
+ }
+ syscall = 0;
+ } else {
+ resume_user_mode_work(regs);
+ }
+ }
+ local_irq_disable();
+ thread_flags = read_thread_flags();
+ } while (thread_flags & _TIF_WORK_MASK);
+ return 0;
+}
diff --git a/arch/openrisc/kernel/smp.c b/arch/openrisc/kernel/smp.c
new file mode 100644
index 0000000000..1c5a2d71d6
--- /dev/null
+++ b/arch/openrisc/kernel/smp.c
@@ -0,0 +1,332 @@
+/*
+ * Copyright (C) 2014 Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
+ * Copyright (C) 2017 Stafford Horne <shorne@gmail.com>
+ *
+ * Based on arm64 and arc implementations
+ * Copyright (C) 2013 ARM Ltd.
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/smp.h>
+#include <linux/cpu.h>
+#include <linux/sched.h>
+#include <linux/sched/mm.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <asm/cpuinfo.h>
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
+#include <asm/time.h>
+
+asmlinkage __init void secondary_start_kernel(void);
+
+static void (*smp_cross_call)(const struct cpumask *, unsigned int);
+
+unsigned long secondary_release = -1;
+struct thread_info *secondary_thread_info;
+
+enum ipi_msg_type {
+ IPI_WAKEUP,
+ IPI_RESCHEDULE,
+ IPI_CALL_FUNC,
+ IPI_CALL_FUNC_SINGLE,
+};
+
+static DEFINE_SPINLOCK(boot_lock);
+
+static void boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ /*
+ * set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ secondary_release = cpu;
+ smp_cross_call(cpumask_of(cpu), IPI_WAKEUP);
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+}
+
+void __init smp_prepare_boot_cpu(void)
+{
+}
+
+void __init smp_init_cpus(void)
+{
+ struct device_node *cpu;
+ u32 cpu_id;
+
+ for_each_of_cpu_node(cpu) {
+ cpu_id = of_get_cpu_hwid(cpu, 0);
+ if (cpu_id < NR_CPUS)
+ set_cpu_possible(cpu_id, true);
+ }
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+ unsigned int cpu;
+
+ /*
+ * Initialise the present map, which describes the set of CPUs
+ * actually populated at the present time.
+ */
+ for_each_possible_cpu(cpu) {
+ if (cpu < max_cpus)
+ set_cpu_present(cpu, true);
+ }
+}
+
+void __init smp_cpus_done(unsigned int max_cpus)
+{
+}
+
+static DECLARE_COMPLETION(cpu_running);
+
+int __cpu_up(unsigned int cpu, struct task_struct *idle)
+{
+ if (smp_cross_call == NULL) {
+ pr_warn("CPU%u: failed to start, IPI controller missing",
+ cpu);
+ return -EIO;
+ }
+
+ secondary_thread_info = task_thread_info(idle);
+ current_pgd[cpu] = init_mm.pgd;
+
+ boot_secondary(cpu, idle);
+ if (!wait_for_completion_timeout(&cpu_running,
+ msecs_to_jiffies(1000))) {
+ pr_crit("CPU%u: failed to start\n", cpu);
+ return -EIO;
+ }
+ synchronise_count_master(cpu);
+
+ return 0;
+}
+
+asmlinkage __init void secondary_start_kernel(void)
+{
+ struct mm_struct *mm = &init_mm;
+ unsigned int cpu = smp_processor_id();
+ /*
+ * All kernel threads share the same mm context; grab a
+ * reference and switch to it.
+ */
+ mmgrab(mm);
+ current->active_mm = mm;
+ cpumask_set_cpu(cpu, mm_cpumask(mm));
+
+ pr_info("CPU%u: Booted secondary processor\n", cpu);
+
+ setup_cpuinfo();
+ openrisc_clockevent_init();
+
+ notify_cpu_starting(cpu);
+
+ /*
+ * OK, now it's safe to let the boot CPU continue
+ */
+ complete(&cpu_running);
+
+ synchronise_count_slave(cpu);
+ set_cpu_online(cpu, true);
+
+ local_irq_enable();
+ /*
+ * OK, it's off to the idle thread for us
+ */
+ cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
+}
+
+void handle_IPI(unsigned int ipi_msg)
+{
+ unsigned int cpu = smp_processor_id();
+
+ switch (ipi_msg) {
+ case IPI_WAKEUP:
+ break;
+
+ case IPI_RESCHEDULE:
+ scheduler_ipi();
+ break;
+
+ case IPI_CALL_FUNC:
+ generic_smp_call_function_interrupt();
+ break;
+
+ case IPI_CALL_FUNC_SINGLE:
+ generic_smp_call_function_single_interrupt();
+ break;
+
+ default:
+ WARN(1, "CPU%u: Unknown IPI message 0x%x\n", cpu, ipi_msg);
+ break;
+ }
+}
+
+void arch_smp_send_reschedule(int cpu)
+{
+ smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
+}
+
+static void stop_this_cpu(void *dummy)
+{
+ /* Remove this CPU */
+ set_cpu_online(smp_processor_id(), false);
+
+ local_irq_disable();
+ /* CPU Doze */
+ if (mfspr(SPR_UPR) & SPR_UPR_PMP)
+ mtspr(SPR_PMR, mfspr(SPR_PMR) | SPR_PMR_DME);
+ /* If that didn't work, infinite loop */
+ while (1)
+ ;
+}
+
+void smp_send_stop(void)
+{
+ smp_call_function(stop_this_cpu, NULL, 0);
+}
+
+void __init set_smp_cross_call(void (*fn)(const struct cpumask *, unsigned int))
+{
+ smp_cross_call = fn;
+}
+
+void arch_send_call_function_single_ipi(int cpu)
+{
+ smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
+}
+
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
+{
+ smp_cross_call(mask, IPI_CALL_FUNC);
+}
+
+/* TLB flush operations - Performed on each CPU*/
+static inline void ipi_flush_tlb_all(void *ignored)
+{
+ local_flush_tlb_all();
+}
+
+static inline void ipi_flush_tlb_mm(void *info)
+{
+ struct mm_struct *mm = (struct mm_struct *)info;
+
+ local_flush_tlb_mm(mm);
+}
+
+static void smp_flush_tlb_mm(struct cpumask *cmask, struct mm_struct *mm)
+{
+ unsigned int cpuid;
+
+ if (cpumask_empty(cmask))
+ return;
+
+ cpuid = get_cpu();
+
+ if (cpumask_any_but(cmask, cpuid) >= nr_cpu_ids) {
+ /* local cpu is the only cpu present in cpumask */
+ local_flush_tlb_mm(mm);
+ } else {
+ on_each_cpu_mask(cmask, ipi_flush_tlb_mm, mm, 1);
+ }
+ put_cpu();
+}
+
+struct flush_tlb_data {
+ unsigned long addr1;
+ unsigned long addr2;
+};
+
+static inline void ipi_flush_tlb_page(void *info)
+{
+ struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
+
+ local_flush_tlb_page(NULL, fd->addr1);
+}
+
+static inline void ipi_flush_tlb_range(void *info)
+{
+ struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
+
+ local_flush_tlb_range(NULL, fd->addr1, fd->addr2);
+}
+
+static void smp_flush_tlb_range(const struct cpumask *cmask, unsigned long start,
+ unsigned long end)
+{
+ unsigned int cpuid;
+
+ if (cpumask_empty(cmask))
+ return;
+
+ cpuid = get_cpu();
+
+ if (cpumask_any_but(cmask, cpuid) >= nr_cpu_ids) {
+ /* local cpu is the only cpu present in cpumask */
+ if ((end - start) <= PAGE_SIZE)
+ local_flush_tlb_page(NULL, start);
+ else
+ local_flush_tlb_range(NULL, start, end);
+ } else {
+ struct flush_tlb_data fd;
+
+ fd.addr1 = start;
+ fd.addr2 = end;
+
+ if ((end - start) <= PAGE_SIZE)
+ on_each_cpu_mask(cmask, ipi_flush_tlb_page, &fd, 1);
+ else
+ on_each_cpu_mask(cmask, ipi_flush_tlb_range, &fd, 1);
+ }
+ put_cpu();
+}
+
+void flush_tlb_all(void)
+{
+ on_each_cpu(ipi_flush_tlb_all, NULL, 1);
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+ smp_flush_tlb_mm(mm_cpumask(mm), mm);
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+{
+ smp_flush_tlb_range(mm_cpumask(vma->vm_mm), uaddr, uaddr + PAGE_SIZE);
+}
+
+void flush_tlb_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end)
+{
+ const struct cpumask *cmask = vma ? mm_cpumask(vma->vm_mm)
+ : cpu_online_mask;
+ smp_flush_tlb_range(cmask, start, end);
+}
+
+/* Instruction cache invalidate - performed on each cpu */
+static void ipi_icache_page_inv(void *arg)
+{
+ struct page *page = arg;
+
+ local_icache_page_inv(page);
+}
+
+void smp_icache_page_inv(struct page *page)
+{
+ on_each_cpu(ipi_icache_page_inv, page, 1);
+}
+EXPORT_SYMBOL(smp_icache_page_inv);
diff --git a/arch/openrisc/kernel/stacktrace.c b/arch/openrisc/kernel/stacktrace.c
new file mode 100644
index 0000000000..54d38809e2
--- /dev/null
+++ b/arch/openrisc/kernel/stacktrace.c
@@ -0,0 +1,100 @@
+/*
+ * Stack trace utility for OpenRISC
+ *
+ * Copyright (C) 2017 Stafford Horne <shorne@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ * Losely based on work from sh and powerpc.
+ */
+
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/task_stack.h>
+#include <linux/stacktrace.h>
+
+#include <asm/processor.h>
+#include <asm/unwinder.h>
+
+/*
+ * Save stack-backtrace addresses into a stack_trace buffer.
+ */
+static void
+save_stack_address(void *data, unsigned long addr, int reliable)
+{
+ struct stack_trace *trace = data;
+
+ if (!reliable)
+ return;
+
+ if (trace->skip > 0) {
+ trace->skip--;
+ return;
+ }
+
+ if (trace->nr_entries < trace->max_entries)
+ trace->entries[trace->nr_entries++] = addr;
+}
+
+void save_stack_trace(struct stack_trace *trace)
+{
+ unwind_stack(trace, (unsigned long *) &trace, save_stack_address);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);
+
+static void
+save_stack_address_nosched(void *data, unsigned long addr, int reliable)
+{
+ struct stack_trace *trace = (struct stack_trace *)data;
+
+ if (!reliable)
+ return;
+
+ if (in_sched_functions(addr))
+ return;
+
+ if (trace->skip > 0) {
+ trace->skip--;
+ return;
+ }
+
+ if (trace->nr_entries < trace->max_entries)
+ trace->entries[trace->nr_entries++] = addr;
+}
+
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+ unsigned long *sp = NULL;
+
+ if (!try_get_task_stack(tsk))
+ return;
+
+ if (tsk == current)
+ sp = (unsigned long *) &sp;
+ else {
+ unsigned long ksp;
+
+ /* Locate stack from kernel context */
+ ksp = task_thread_info(tsk)->ksp;
+ ksp += STACK_FRAME_OVERHEAD; /* redzone */
+ ksp += sizeof(struct pt_regs);
+
+ sp = (unsigned long *) ksp;
+ }
+
+ unwind_stack(trace, sp, save_stack_address_nosched);
+
+ put_task_stack(tsk);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
+
+void
+save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace)
+{
+ unwind_stack(trace, (unsigned long *) regs->sp,
+ save_stack_address_nosched);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace_regs);
diff --git a/arch/openrisc/kernel/sync-timer.c b/arch/openrisc/kernel/sync-timer.c
new file mode 100644
index 0000000000..ed8d835cac
--- /dev/null
+++ b/arch/openrisc/kernel/sync-timer.c
@@ -0,0 +1,120 @@
+/*
+ * OR1K timer synchronisation
+ *
+ * Based on work from MIPS implementation.
+ *
+ * All CPUs will have their count registers synchronised to the CPU0 next time
+ * value. This can cause a small timewarp for CPU0. All other CPU's should
+ * not have done anything significant (but they may have had interrupts
+ * enabled briefly - prom_smp_finish() should not be responsible for enabling
+ * interrupts...)
+ */
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+#include <linux/cpumask.h>
+
+#include <asm/time.h>
+#include <asm/timex.h>
+#include <linux/atomic.h>
+#include <asm/barrier.h>
+
+#include <asm/spr.h>
+
+static unsigned int initcount;
+static atomic_t count_count_start = ATOMIC_INIT(0);
+static atomic_t count_count_stop = ATOMIC_INIT(0);
+
+#define COUNTON 100
+#define NR_LOOPS 3
+
+void synchronise_count_master(int cpu)
+{
+ int i;
+ unsigned long flags;
+
+ pr_info("Synchronize counters for CPU %u: ", cpu);
+
+ local_irq_save(flags);
+
+ /*
+ * We loop a few times to get a primed instruction cache,
+ * then the last pass is more or less synchronised and
+ * the master and slaves each set their cycle counters to a known
+ * value all at once. This reduces the chance of having random offsets
+ * between the processors, and guarantees that the maximum
+ * delay between the cycle counters is never bigger than
+ * the latency of information-passing (cachelines) between
+ * two CPUs.
+ */
+
+ for (i = 0; i < NR_LOOPS; i++) {
+ /* slaves loop on '!= 2' */
+ while (atomic_read(&count_count_start) != 1)
+ mb();
+ atomic_set(&count_count_stop, 0);
+ smp_wmb();
+
+ /* Let the slave writes its count register */
+ atomic_inc(&count_count_start);
+
+ /* Count will be initialised to current timer */
+ if (i == 1)
+ initcount = get_cycles();
+
+ /*
+ * Everyone initialises count in the last loop:
+ */
+ if (i == NR_LOOPS-1)
+ openrisc_timer_set(initcount);
+
+ /*
+ * Wait for slave to leave the synchronization point:
+ */
+ while (atomic_read(&count_count_stop) != 1)
+ mb();
+ atomic_set(&count_count_start, 0);
+ smp_wmb();
+ atomic_inc(&count_count_stop);
+ }
+ /* Arrange for an interrupt in a short while */
+ openrisc_timer_set_next(COUNTON);
+
+ local_irq_restore(flags);
+
+ /*
+ * i386 code reported the skew here, but the
+ * count registers were almost certainly out of sync
+ * so no point in alarming people
+ */
+ pr_cont("done.\n");
+}
+
+void synchronise_count_slave(int cpu)
+{
+ int i;
+
+ /*
+ * Not every cpu is online at the time this gets called,
+ * so we first wait for the master to say everyone is ready
+ */
+
+ for (i = 0; i < NR_LOOPS; i++) {
+ atomic_inc(&count_count_start);
+ while (atomic_read(&count_count_start) != 2)
+ mb();
+
+ /*
+ * Everyone initialises count in the last loop:
+ */
+ if (i == NR_LOOPS-1)
+ openrisc_timer_set(initcount);
+
+ atomic_inc(&count_count_stop);
+ while (atomic_read(&count_count_stop) != 2)
+ mb();
+ }
+ /* Arrange for an interrupt in a short while */
+ openrisc_timer_set_next(COUNTON);
+}
+#undef NR_LOOPS
diff --git a/arch/openrisc/kernel/sys_call_table.c b/arch/openrisc/kernel/sys_call_table.c
new file mode 100644
index 0000000000..3d18008310
--- /dev/null
+++ b/arch/openrisc/kernel/sys_call_table.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC sys_call_table.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#include <linux/syscalls.h>
+#include <linux/signal.h>
+#include <linux/unistd.h>
+
+#include <asm/syscalls.h>
+
+#undef __SYSCALL
+#define __SYSCALL(nr, call) [nr] = (call),
+
+void *sys_call_table[__NR_syscalls] = {
+#include <asm/unistd.h>
+};
diff --git a/arch/openrisc/kernel/time.c b/arch/openrisc/kernel/time.c
new file mode 100644
index 0000000000..764c7bfb5d
--- /dev/null
+++ b/arch/openrisc/kernel/time.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC time.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/interrupt.h>
+#include <linux/ftrace.h>
+
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/of_clk.h>
+
+#include <asm/cpuinfo.h>
+#include <asm/time.h>
+
+irqreturn_t __irq_entry timer_interrupt(struct pt_regs *regs);
+
+/* Test the timer ticks to count, used in sync routine */
+inline void openrisc_timer_set(unsigned long count)
+{
+ mtspr(SPR_TTCR, count);
+}
+
+/* Set the timer to trigger in delta cycles */
+inline void openrisc_timer_set_next(unsigned long delta)
+{
+ u32 c;
+
+ /* Read 32-bit counter value, add delta, mask off the low 28 bits.
+ * We're guaranteed delta won't be bigger than 28 bits because the
+ * generic timekeeping code ensures that for us.
+ */
+ c = mfspr(SPR_TTCR);
+ c += delta;
+ c &= SPR_TTMR_TP;
+
+ /* Set counter and enable interrupt.
+ * Keep timer in continuous mode always.
+ */
+ mtspr(SPR_TTMR, SPR_TTMR_CR | SPR_TTMR_IE | c);
+}
+
+static int openrisc_timer_set_next_event(unsigned long delta,
+ struct clock_event_device *dev)
+{
+ openrisc_timer_set_next(delta);
+ return 0;
+}
+
+/* This is the clock event device based on the OR1K tick timer.
+ * As the timer is being used as a continuous clock-source (required for HR
+ * timers) we cannot enable the PERIODIC feature. The tick timer can run using
+ * one-shot events, so no problem.
+ */
+static DEFINE_PER_CPU(struct clock_event_device, clockevent_openrisc_timer);
+
+void openrisc_clockevent_init(void)
+{
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *evt =
+ &per_cpu(clockevent_openrisc_timer, cpu);
+ struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[cpu];
+
+ mtspr(SPR_TTMR, SPR_TTMR_CR);
+
+#ifdef CONFIG_SMP
+ evt->broadcast = tick_broadcast;
+#endif
+ evt->name = "openrisc_timer_clockevent",
+ evt->features = CLOCK_EVT_FEAT_ONESHOT,
+ evt->rating = 300,
+ evt->set_next_event = openrisc_timer_set_next_event,
+
+ evt->cpumask = cpumask_of(cpu);
+
+ /* We only have 28 bits */
+ clockevents_config_and_register(evt, cpuinfo->clock_frequency,
+ 100, 0x0fffffff);
+
+}
+
+static inline void timer_ack(void)
+{
+ /* Clear the IP bit and disable further interrupts */
+ /* This can be done very simply... we just need to keep the timer
+ running, so just maintain the CR bits while clearing the rest
+ of the register
+ */
+ mtspr(SPR_TTMR, SPR_TTMR_CR);
+}
+
+/*
+ * The timer interrupt is mostly handled in generic code nowadays... this
+ * function just acknowledges the interrupt and fires the event handler that
+ * has been set on the clockevent device by the generic time management code.
+ *
+ * This function needs to be called by the timer exception handler and that's
+ * all the exception handler needs to do.
+ */
+
+irqreturn_t __irq_entry timer_interrupt(struct pt_regs *regs)
+{
+ struct pt_regs *old_regs = set_irq_regs(regs);
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *evt =
+ &per_cpu(clockevent_openrisc_timer, cpu);
+
+ timer_ack();
+
+ /*
+ * update_process_times() expects us to have called irq_enter().
+ */
+ irq_enter();
+ evt->event_handler(evt);
+ irq_exit();
+
+ set_irq_regs(old_regs);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Clocksource: Based on OpenRISC timer/counter
+ *
+ * This sets up the OpenRISC Tick Timer as a clock source. The tick timer
+ * is 32 bits wide and runs at the CPU clock frequency.
+ */
+static u64 openrisc_timer_read(struct clocksource *cs)
+{
+ return (u64) mfspr(SPR_TTCR);
+}
+
+static struct clocksource openrisc_timer = {
+ .name = "openrisc_timer",
+ .rating = 200,
+ .read = openrisc_timer_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init openrisc_timer_init(void)
+{
+ struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()];
+
+ if (clocksource_register_hz(&openrisc_timer, cpuinfo->clock_frequency))
+ panic("failed to register clocksource");
+
+ /* Enable the incrementer: 'continuous' mode with interrupt disabled */
+ mtspr(SPR_TTMR, SPR_TTMR_CR);
+
+ return 0;
+}
+
+void __init time_init(void)
+{
+ u32 upr;
+
+ upr = mfspr(SPR_UPR);
+ if (!(upr & SPR_UPR_TTP))
+ panic("Linux not supported on devices without tick timer");
+
+ openrisc_timer_init();
+ openrisc_clockevent_init();
+
+ of_clk_init(NULL);
+ timer_probe();
+}
diff --git a/arch/openrisc/kernel/traps.c b/arch/openrisc/kernel/traps.c
new file mode 100644
index 0000000000..9370888c9a
--- /dev/null
+++ b/arch/openrisc/kernel/traps.c
@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC traps.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * Here we handle the break vectors not used by the system call
+ * mechanism, as well as some general stack/register dumping
+ * things.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/task_stack.h>
+#include <linux/kernel.h>
+#include <linux/extable.h>
+#include <linux/kmod.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/kallsyms.h>
+#include <linux/uaccess.h>
+
+#include <asm/bug.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/unwinder.h>
+#include <asm/sections.h>
+
+int lwa_flag;
+static unsigned long __user *lwa_addr;
+
+asmlinkage void unhandled_exception(struct pt_regs *regs, int ea, int vector);
+asmlinkage void do_trap(struct pt_regs *regs, unsigned long address);
+asmlinkage void do_fpe_trap(struct pt_regs *regs, unsigned long address);
+asmlinkage void do_unaligned_access(struct pt_regs *regs, unsigned long address);
+asmlinkage void do_bus_fault(struct pt_regs *regs, unsigned long address);
+asmlinkage void do_illegal_instruction(struct pt_regs *regs,
+ unsigned long address);
+
+static void print_trace(void *data, unsigned long addr, int reliable)
+{
+ const char *loglvl = data;
+
+ printk("%s[<%p>] %s%pS\n", loglvl, (void *) addr, reliable ? "" : "? ",
+ (void *) addr);
+}
+
+static void print_data(unsigned long base_addr, unsigned long word, int i)
+{
+ if (i == 0)
+ printk("(%08lx:)\t%08lx", base_addr + (i * 4), word);
+ else
+ printk(" %08lx:\t%08lx", base_addr + (i * 4), word);
+}
+
+/* displays a short stack trace */
+void show_stack(struct task_struct *task, unsigned long *esp, const char *loglvl)
+{
+ if (esp == NULL)
+ esp = (unsigned long *)&esp;
+
+ printk("%sCall trace:\n", loglvl);
+ unwind_stack((void *)loglvl, esp, print_trace);
+}
+
+void show_registers(struct pt_regs *regs)
+{
+ int i;
+ int in_kernel = 1;
+ unsigned long esp;
+
+ esp = (unsigned long)(regs->sp);
+ if (user_mode(regs))
+ in_kernel = 0;
+
+ printk("CPU #: %d\n"
+ " PC: %08lx SR: %08lx SP: %08lx FPCSR: %08lx\n",
+ smp_processor_id(), regs->pc, regs->sr, regs->sp,
+ regs->fpcsr);
+ printk("GPR00: %08lx GPR01: %08lx GPR02: %08lx GPR03: %08lx\n",
+ 0L, regs->gpr[1], regs->gpr[2], regs->gpr[3]);
+ printk("GPR04: %08lx GPR05: %08lx GPR06: %08lx GPR07: %08lx\n",
+ regs->gpr[4], regs->gpr[5], regs->gpr[6], regs->gpr[7]);
+ printk("GPR08: %08lx GPR09: %08lx GPR10: %08lx GPR11: %08lx\n",
+ regs->gpr[8], regs->gpr[9], regs->gpr[10], regs->gpr[11]);
+ printk("GPR12: %08lx GPR13: %08lx GPR14: %08lx GPR15: %08lx\n",
+ regs->gpr[12], regs->gpr[13], regs->gpr[14], regs->gpr[15]);
+ printk("GPR16: %08lx GPR17: %08lx GPR18: %08lx GPR19: %08lx\n",
+ regs->gpr[16], regs->gpr[17], regs->gpr[18], regs->gpr[19]);
+ printk("GPR20: %08lx GPR21: %08lx GPR22: %08lx GPR23: %08lx\n",
+ regs->gpr[20], regs->gpr[21], regs->gpr[22], regs->gpr[23]);
+ printk("GPR24: %08lx GPR25: %08lx GPR26: %08lx GPR27: %08lx\n",
+ regs->gpr[24], regs->gpr[25], regs->gpr[26], regs->gpr[27]);
+ printk("GPR28: %08lx GPR29: %08lx GPR30: %08lx GPR31: %08lx\n",
+ regs->gpr[28], regs->gpr[29], regs->gpr[30], regs->gpr[31]);
+ printk(" RES: %08lx oGPR11: %08lx\n",
+ regs->gpr[11], regs->orig_gpr11);
+
+ printk("Process %s (pid: %d, stackpage=%08lx)\n",
+ current->comm, current->pid, (unsigned long)current);
+ /*
+ * When in-kernel, we also print out the stack and code at the
+ * time of the fault..
+ */
+ if (in_kernel) {
+
+ printk("\nStack: ");
+ show_stack(NULL, (unsigned long *)esp, KERN_EMERG);
+
+ if (esp < PAGE_OFFSET)
+ goto bad_stack;
+
+ printk("\n");
+ for (i = -8; i < 24; i += 1) {
+ unsigned long word;
+
+ if (__get_user(word, &((unsigned long *)esp)[i])) {
+bad_stack:
+ printk(" Bad Stack value.");
+ break;
+ }
+
+ print_data(esp, word, i);
+ }
+
+ printk("\nCode: ");
+ if (regs->pc < PAGE_OFFSET)
+ goto bad;
+
+ for (i = -6; i < 6; i += 1) {
+ unsigned long word;
+
+ if (__get_user(word, &((unsigned long *)regs->pc)[i])) {
+bad:
+ printk(" Bad PC value.");
+ break;
+ }
+
+ print_data(regs->pc, word, i);
+ }
+ }
+ printk("\n");
+}
+
+/* This is normally the 'Oops' routine */
+void __noreturn die(const char *str, struct pt_regs *regs, long err)
+{
+
+ console_verbose();
+ printk("\n%s#: %04lx\n", str, err & 0xffff);
+ show_registers(regs);
+#ifdef CONFIG_JUMP_UPON_UNHANDLED_EXCEPTION
+ printk("\n\nUNHANDLED_EXCEPTION: entering infinite loop\n");
+
+ /* shut down interrupts */
+ local_irq_disable();
+
+ __asm__ __volatile__("l.nop 1");
+ do {} while (1);
+#endif
+ make_task_dead(SIGSEGV);
+}
+
+asmlinkage void unhandled_exception(struct pt_regs *regs, int ea, int vector)
+{
+ printk("Unable to handle exception at EA =0x%x, vector 0x%x",
+ ea, vector);
+ die("Oops", regs, 9);
+}
+
+asmlinkage void do_fpe_trap(struct pt_regs *regs, unsigned long address)
+{
+ int code = FPE_FLTUNK;
+ unsigned long fpcsr = regs->fpcsr;
+
+ if (fpcsr & SPR_FPCSR_IVF)
+ code = FPE_FLTINV;
+ else if (fpcsr & SPR_FPCSR_OVF)
+ code = FPE_FLTOVF;
+ else if (fpcsr & SPR_FPCSR_UNF)
+ code = FPE_FLTUND;
+ else if (fpcsr & SPR_FPCSR_DZF)
+ code = FPE_FLTDIV;
+ else if (fpcsr & SPR_FPCSR_IXF)
+ code = FPE_FLTRES;
+
+ /* Clear all flags */
+ regs->fpcsr &= ~SPR_FPCSR_ALLF;
+
+ force_sig_fault(SIGFPE, code, (void __user *)regs->pc);
+}
+
+asmlinkage void do_trap(struct pt_regs *regs, unsigned long address)
+{
+ force_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *)regs->pc);
+}
+
+asmlinkage void do_unaligned_access(struct pt_regs *regs, unsigned long address)
+{
+ if (user_mode(regs)) {
+ /* Send a SIGBUS */
+ force_sig_fault(SIGBUS, BUS_ADRALN, (void __user *)address);
+ } else {
+ printk("KERNEL: Unaligned Access 0x%.8lx\n", address);
+ show_registers(regs);
+ die("Die:", regs, address);
+ }
+
+}
+
+asmlinkage void do_bus_fault(struct pt_regs *regs, unsigned long address)
+{
+ if (user_mode(regs)) {
+ /* Send a SIGBUS */
+ force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *)address);
+ } else { /* Kernel mode */
+ printk("KERNEL: Bus error (SIGBUS) 0x%.8lx\n", address);
+ show_registers(regs);
+ die("Die:", regs, address);
+ }
+}
+
+static inline int in_delay_slot(struct pt_regs *regs)
+{
+#ifdef CONFIG_OPENRISC_NO_SPR_SR_DSX
+ /* No delay slot flag, do the old way */
+ unsigned int op, insn;
+
+ insn = *((unsigned int *)regs->pc);
+ op = insn >> 26;
+ switch (op) {
+ case 0x00: /* l.j */
+ case 0x01: /* l.jal */
+ case 0x03: /* l.bnf */
+ case 0x04: /* l.bf */
+ case 0x11: /* l.jr */
+ case 0x12: /* l.jalr */
+ return 1;
+ default:
+ return 0;
+ }
+#else
+ return mfspr(SPR_SR) & SPR_SR_DSX;
+#endif
+}
+
+static inline void adjust_pc(struct pt_regs *regs, unsigned long address)
+{
+ int displacement;
+ unsigned int rb, op, jmp;
+
+ if (unlikely(in_delay_slot(regs))) {
+ /* In delay slot, instruction at pc is a branch, simulate it */
+ jmp = *((unsigned int *)regs->pc);
+
+ displacement = sign_extend32(((jmp) & 0x3ffffff) << 2, 27);
+ rb = (jmp & 0x0000ffff) >> 11;
+ op = jmp >> 26;
+
+ switch (op) {
+ case 0x00: /* l.j */
+ regs->pc += displacement;
+ return;
+ case 0x01: /* l.jal */
+ regs->pc += displacement;
+ regs->gpr[9] = regs->pc + 8;
+ return;
+ case 0x03: /* l.bnf */
+ if (regs->sr & SPR_SR_F)
+ regs->pc += 8;
+ else
+ regs->pc += displacement;
+ return;
+ case 0x04: /* l.bf */
+ if (regs->sr & SPR_SR_F)
+ regs->pc += displacement;
+ else
+ regs->pc += 8;
+ return;
+ case 0x11: /* l.jr */
+ regs->pc = regs->gpr[rb];
+ return;
+ case 0x12: /* l.jalr */
+ regs->pc = regs->gpr[rb];
+ regs->gpr[9] = regs->pc + 8;
+ return;
+ default:
+ break;
+ }
+ } else {
+ regs->pc += 4;
+ }
+}
+
+static inline void simulate_lwa(struct pt_regs *regs, unsigned long address,
+ unsigned int insn)
+{
+ unsigned int ra, rd;
+ unsigned long value;
+ unsigned long orig_pc;
+ long imm;
+
+ const struct exception_table_entry *entry;
+
+ orig_pc = regs->pc;
+ adjust_pc(regs, address);
+
+ ra = (insn >> 16) & 0x1f;
+ rd = (insn >> 21) & 0x1f;
+ imm = (short)insn;
+ lwa_addr = (unsigned long __user *)(regs->gpr[ra] + imm);
+
+ if ((unsigned long)lwa_addr & 0x3) {
+ do_unaligned_access(regs, address);
+ return;
+ }
+
+ if (get_user(value, lwa_addr)) {
+ if (user_mode(regs)) {
+ force_sig(SIGSEGV);
+ return;
+ }
+
+ if ((entry = search_exception_tables(orig_pc))) {
+ regs->pc = entry->fixup;
+ return;
+ }
+
+ /* kernel access in kernel space, load it directly */
+ value = *((unsigned long *)lwa_addr);
+ }
+
+ lwa_flag = 1;
+ regs->gpr[rd] = value;
+}
+
+static inline void simulate_swa(struct pt_regs *regs, unsigned long address,
+ unsigned int insn)
+{
+ unsigned long __user *vaddr;
+ unsigned long orig_pc;
+ unsigned int ra, rb;
+ long imm;
+
+ const struct exception_table_entry *entry;
+
+ orig_pc = regs->pc;
+ adjust_pc(regs, address);
+
+ ra = (insn >> 16) & 0x1f;
+ rb = (insn >> 11) & 0x1f;
+ imm = (short)(((insn & 0x2200000) >> 10) | (insn & 0x7ff));
+ vaddr = (unsigned long __user *)(regs->gpr[ra] + imm);
+
+ if (!lwa_flag || vaddr != lwa_addr) {
+ regs->sr &= ~SPR_SR_F;
+ return;
+ }
+
+ if ((unsigned long)vaddr & 0x3) {
+ do_unaligned_access(regs, address);
+ return;
+ }
+
+ if (put_user(regs->gpr[rb], vaddr)) {
+ if (user_mode(regs)) {
+ force_sig(SIGSEGV);
+ return;
+ }
+
+ if ((entry = search_exception_tables(orig_pc))) {
+ regs->pc = entry->fixup;
+ return;
+ }
+
+ /* kernel access in kernel space, store it directly */
+ *((unsigned long *)vaddr) = regs->gpr[rb];
+ }
+
+ lwa_flag = 0;
+ regs->sr |= SPR_SR_F;
+}
+
+#define INSN_LWA 0x1b
+#define INSN_SWA 0x33
+
+asmlinkage void do_illegal_instruction(struct pt_regs *regs,
+ unsigned long address)
+{
+ unsigned int op;
+ unsigned int insn = *((unsigned int *)address);
+
+ op = insn >> 26;
+
+ switch (op) {
+ case INSN_LWA:
+ simulate_lwa(regs, address, insn);
+ return;
+
+ case INSN_SWA:
+ simulate_swa(regs, address, insn);
+ return;
+
+ default:
+ break;
+ }
+
+ if (user_mode(regs)) {
+ /* Send a SIGILL */
+ force_sig_fault(SIGILL, ILL_ILLOPC, (void __user *)address);
+ } else { /* Kernel mode */
+ printk("KERNEL: Illegal instruction (SIGILL) 0x%.8lx\n",
+ address);
+ show_registers(regs);
+ die("Die:", regs, address);
+ }
+}
diff --git a/arch/openrisc/kernel/unwinder.c b/arch/openrisc/kernel/unwinder.c
new file mode 100644
index 0000000000..c6ad6f867a
--- /dev/null
+++ b/arch/openrisc/kernel/unwinder.c
@@ -0,0 +1,105 @@
+/*
+ * OpenRISC unwinder.c
+ *
+ * Reusable arch specific api for unwinding stacks.
+ *
+ * Copyright (C) 2017 Stafford Horne <shorne@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/sched/task_stack.h>
+#include <linux/kernel.h>
+
+#include <asm/unwinder.h>
+
+#ifdef CONFIG_FRAME_POINTER
+struct or1k_frameinfo {
+ unsigned long *fp;
+ unsigned long ra;
+ unsigned long top;
+};
+
+/*
+ * Verify a frameinfo structure. The return address should be a valid text
+ * address. The frame pointer may be null if its the last frame, otherwise
+ * the frame pointer should point to a location in the stack after the
+ * top of the next frame up.
+ */
+static inline int or1k_frameinfo_valid(struct or1k_frameinfo *frameinfo)
+{
+ return (frameinfo->fp == NULL ||
+ (!kstack_end(frameinfo->fp) &&
+ frameinfo->fp > &frameinfo->top)) &&
+ __kernel_text_address(frameinfo->ra);
+}
+
+/*
+ * Create a stack trace doing scanning which is frame pointer aware. We can
+ * get reliable stack traces by matching the previously found frame
+ * pointer with the top of the stack address every time we find a valid
+ * or1k_frameinfo.
+ *
+ * Ideally the stack parameter will be passed as FP, but it can not be
+ * guaranteed. Therefore we scan each address looking for the first sign
+ * of a return address.
+ *
+ * The OpenRISC stack frame looks something like the following. The
+ * location SP is held in r1 and location FP is held in r2 when frame pointers
+ * enabled.
+ *
+ * SP -> (top of stack)
+ * - (callee saved registers)
+ * - (local variables)
+ * FP-8 -> previous FP \
+ * FP-4 -> return address |- or1k_frameinfo
+ * FP -> (previous top of stack) /
+ */
+void unwind_stack(void *data, unsigned long *stack,
+ void (*trace)(void *data, unsigned long addr, int reliable))
+{
+ unsigned long *next_fp = NULL;
+ struct or1k_frameinfo *frameinfo = NULL;
+ int reliable = 0;
+
+ while (!kstack_end(stack)) {
+ frameinfo = container_of(stack,
+ struct or1k_frameinfo,
+ top);
+
+ if (__kernel_text_address(frameinfo->ra)) {
+ if (or1k_frameinfo_valid(frameinfo) &&
+ (next_fp == NULL ||
+ next_fp == &frameinfo->top)) {
+ reliable = 1;
+ next_fp = frameinfo->fp;
+ } else
+ reliable = 0;
+
+ trace(data, frameinfo->ra, reliable);
+ }
+ stack++;
+ }
+}
+
+#else /* CONFIG_FRAME_POINTER */
+
+/*
+ * Create a stack trace by doing a simple scan treating all text addresses
+ * as return addresses.
+ */
+void unwind_stack(void *data, unsigned long *stack,
+ void (*trace)(void *data, unsigned long addr, int reliable))
+{
+ unsigned long addr;
+
+ while (!kstack_end(stack)) {
+ addr = *stack++;
+ if (__kernel_text_address(addr))
+ trace(data, addr, 0);
+ }
+}
+#endif /* CONFIG_FRAME_POINTER */
+
diff --git a/arch/openrisc/kernel/vmlinux.h b/arch/openrisc/kernel/vmlinux.h
new file mode 100644
index 0000000000..bdea46c617
--- /dev/null
+++ b/arch/openrisc/kernel/vmlinux.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __OPENRISC_VMLINUX_H_
+#define __OPENRISC_VMLINUX_H_
+
+#ifdef CONFIG_BLK_DEV_INITRD
+extern char __initrd_start, __initrd_end;
+#endif
+
+#endif
diff --git a/arch/openrisc/kernel/vmlinux.lds.S b/arch/openrisc/kernel/vmlinux.lds.S
new file mode 100644
index 0000000000..bc13060478
--- /dev/null
+++ b/arch/openrisc/kernel/vmlinux.lds.S
@@ -0,0 +1,109 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC vmlinux.lds.S
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * ld script for OpenRISC architecture
+ */
+
+/* TODO
+ * - clean up __offset & stuff
+ * - change all 8192 alignment to PAGE !!!
+ * - recheck if all alignments are really needed
+ */
+
+# define LOAD_OFFSET PAGE_OFFSET
+# define LOAD_BASE PAGE_OFFSET
+
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <asm-generic/vmlinux.lds.h>
+
+#ifdef __OR1K__
+#define __OUTPUT_FORMAT "elf32-or1k"
+#else
+#define __OUTPUT_FORMAT "elf32-or32"
+#endif
+
+OUTPUT_FORMAT(__OUTPUT_FORMAT, __OUTPUT_FORMAT, __OUTPUT_FORMAT)
+jiffies = jiffies_64 + 4;
+
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = LOAD_BASE ;
+
+ _text = .;
+
+ /* _s_kernel_ro must be page aligned */
+ . = ALIGN(PAGE_SIZE);
+ _s_kernel_ro = .;
+
+ .text : AT(ADDR(.text) - LOAD_OFFSET)
+ {
+ _stext = .;
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ IRQENTRY_TEXT
+ SOFTIRQENTRY_TEXT
+ *(.fixup)
+ *(.text.__*)
+ _etext = .;
+ }
+ /* TODO: Check if fixup and text.__* are really necessary
+ * fixup is definitely necessary
+ */
+
+ _sdata = .;
+
+ /* Page alignment required for RO_DATA */
+ RO_DATA(PAGE_SIZE)
+ _e_kernel_ro = .;
+
+ /* Whatever comes after _e_kernel_ro had better be page-aligend, too */
+
+ /* 32 here is cacheline size... recheck this */
+ RW_DATA(32, PAGE_SIZE, PAGE_SIZE)
+
+ _edata = .;
+
+ EXCEPTION_TABLE(4)
+
+ /* Init code and data */
+ . = ALIGN(PAGE_SIZE);
+ __init_begin = .;
+
+ HEAD_TEXT_SECTION
+
+ /* Page aligned */
+ INIT_TEXT_SECTION(PAGE_SIZE)
+
+ /* Align __setup_start on 16 byte boundary */
+ INIT_DATA_SECTION(16)
+
+ PERCPU_SECTION(L1_CACHE_BYTES)
+
+ __init_end = .;
+
+ BSS_SECTION(0, 0, 0x20)
+
+ _end = .;
+
+ /* Throw in the debugging sections */
+ STABS_DEBUG
+ DWARF_DEBUG
+ ELF_DETAILS
+
+ /* Sections to be discarded -- must be last */
+ DISCARDS
+}
diff --git a/arch/openrisc/lib/Makefile b/arch/openrisc/lib/Makefile
new file mode 100644
index 0000000000..53327406b4
--- /dev/null
+++ b/arch/openrisc/lib/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for or1k specific library files..
+#
+
+obj-y := delay.o string.o memset.o memcpy.o
diff --git a/arch/openrisc/lib/delay.c b/arch/openrisc/lib/delay.c
new file mode 100644
index 0000000000..5e89e41313
--- /dev/null
+++ b/arch/openrisc/lib/delay.c
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * Precise Delay Loops
+ */
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <asm/param.h>
+#include <asm/delay.h>
+#include <asm/timex.h>
+#include <asm/processor.h>
+
+int read_current_timer(unsigned long *timer_value)
+{
+ *timer_value = get_cycles();
+ return 0;
+}
+
+void __delay(unsigned long cycles)
+{
+ cycles_t start = get_cycles();
+
+ while ((get_cycles() - start) < cycles)
+ cpu_relax();
+}
+EXPORT_SYMBOL(__delay);
+
+inline void __const_udelay(unsigned long xloops)
+{
+ unsigned long long loops;
+
+ loops = (unsigned long long)xloops * loops_per_jiffy * HZ;
+
+ __delay(loops >> 32);
+}
+EXPORT_SYMBOL(__const_udelay);
+
+void __udelay(unsigned long usecs)
+{
+ __const_udelay(usecs * 0x10C7UL); /* 2**32 / 1000000 (rounded up) */
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long nsecs)
+{
+ __const_udelay(nsecs * 0x5UL); /* 2**32 / 1000000000 (rounded up) */
+}
+EXPORT_SYMBOL(__ndelay);
diff --git a/arch/openrisc/lib/memcpy.c b/arch/openrisc/lib/memcpy.c
new file mode 100644
index 0000000000..e2af9b5108
--- /dev/null
+++ b/arch/openrisc/lib/memcpy.c
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/openrisc/lib/memcpy.c
+ *
+ * Optimized memory copy routines for openrisc. These are mostly copied
+ * from ohter sources but slightly entended based on ideas discuassed in
+ * #openrisc.
+ *
+ * The word unroll implementation is an extension to the arm byte
+ * unrolled implementation, but using word copies (if things are
+ * properly aligned)
+ *
+ * The great arm loop unroll algorithm can be found at:
+ * arch/arm/boot/compressed/string.c
+ */
+
+#include <linux/export.h>
+
+#include <linux/string.h>
+
+#ifdef CONFIG_OR1K_1200
+/*
+ * Do memcpy with word copies and loop unrolling. This gives the
+ * best performance on the OR1200 and MOR1KX archirectures
+ */
+void *memcpy(void *dest, __const void *src, __kernel_size_t n)
+{
+ int i = 0;
+ unsigned char *d, *s;
+ uint32_t *dest_w = (uint32_t *)dest, *src_w = (uint32_t *)src;
+
+ /* If both source and dest are word aligned copy words */
+ if (!((unsigned int)dest_w & 3) && !((unsigned int)src_w & 3)) {
+ /* Copy 32 bytes per loop */
+ for (i = n >> 5; i > 0; i--) {
+ *dest_w++ = *src_w++;
+ *dest_w++ = *src_w++;
+ *dest_w++ = *src_w++;
+ *dest_w++ = *src_w++;
+ *dest_w++ = *src_w++;
+ *dest_w++ = *src_w++;
+ *dest_w++ = *src_w++;
+ *dest_w++ = *src_w++;
+ }
+
+ if (n & 1 << 4) {
+ *dest_w++ = *src_w++;
+ *dest_w++ = *src_w++;
+ *dest_w++ = *src_w++;
+ *dest_w++ = *src_w++;
+ }
+
+ if (n & 1 << 3) {
+ *dest_w++ = *src_w++;
+ *dest_w++ = *src_w++;
+ }
+
+ if (n & 1 << 2)
+ *dest_w++ = *src_w++;
+
+ d = (unsigned char *)dest_w;
+ s = (unsigned char *)src_w;
+
+ } else {
+ d = (unsigned char *)dest_w;
+ s = (unsigned char *)src_w;
+
+ for (i = n >> 3; i > 0; i--) {
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (n & 1 << 2) {
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+ }
+
+ if (n & 1 << 1) {
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (n & 1)
+ *d++ = *s++;
+
+ return dest;
+}
+#else
+/*
+ * Use word copies but no loop unrolling as we cannot assume there
+ * will be benefits on the archirecture
+ */
+void *memcpy(void *dest, __const void *src, __kernel_size_t n)
+{
+ unsigned char *d, *s;
+ uint32_t *dest_w = (uint32_t *)dest, *src_w = (uint32_t *)src;
+
+ /* If both source and dest are word aligned copy words */
+ if (!((unsigned int)dest_w & 3) && !((unsigned int)src_w & 3)) {
+ for (; n >= 4; n -= 4)
+ *dest_w++ = *src_w++;
+ }
+
+ d = (unsigned char *)dest_w;
+ s = (unsigned char *)src_w;
+
+ /* For remaining or if not aligned, copy bytes */
+ for (; n >= 1; n -= 1)
+ *d++ = *s++;
+
+ return dest;
+
+}
+#endif
+
+EXPORT_SYMBOL(memcpy);
diff --git a/arch/openrisc/lib/memset.S b/arch/openrisc/lib/memset.S
new file mode 100644
index 0000000000..c3ac2a8b68
--- /dev/null
+++ b/arch/openrisc/lib/memset.S
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC memset.S
+ *
+ * Hand-optimized assembler version of memset for OpenRISC.
+ * Algorithm inspired by several other arch-specific memset routines
+ * in the kernel tree
+ *
+ * Copyright (C) 2015 Olof Kindgren <olof.kindgren@gmail.com>
+ */
+
+ .global memset
+ .type memset, @function
+memset:
+ /* arguments:
+ * r3 = *s
+ * r4 = c
+ * r5 = n
+ * r13, r15, r17, r19 used as temp regs
+ */
+
+ /* Exit if n == 0 */
+ l.sfeqi r5, 0
+ l.bf 4f
+
+ /* Truncate c to char */
+ l.andi r13, r4, 0xff
+
+ /* Skip word extension if c is 0 */
+ l.sfeqi r13, 0
+ l.bf 1f
+ /* Check for at least two whole words (8 bytes) */
+ l.sfleui r5, 7
+
+ /* Extend char c to 32-bit word cccc in r13 */
+ l.slli r15, r13, 16 // r13 = 000c, r15 = 0c00
+ l.or r13, r13, r15 // r13 = 0c0c, r15 = 0c00
+ l.slli r15, r13, 8 // r13 = 0c0c, r15 = c0c0
+ l.or r13, r13, r15 // r13 = cccc, r15 = c0c0
+
+1: l.addi r19, r3, 0 // Set r19 = src
+ /* Jump to byte copy loop if less than two words */
+ l.bf 3f
+ l.or r17, r5, r0 // Set r17 = n
+
+ /* Mask out two LSBs to check alignment */
+ l.andi r15, r3, 0x3
+
+ /* lsb == 00, jump to word copy loop */
+ l.sfeqi r15, 0
+ l.bf 2f
+ l.addi r19, r3, 0 // Set r19 = src
+
+ /* lsb == 01,10 or 11 */
+ l.sb 0(r3), r13 // *src = c
+ l.addi r17, r17, -1 // Decrease n
+
+ l.sfeqi r15, 3
+ l.bf 2f
+ l.addi r19, r3, 1 // src += 1
+
+ /* lsb == 01 or 10 */
+ l.sb 1(r3), r13 // *(src+1) = c
+ l.addi r17, r17, -1 // Decrease n
+
+ l.sfeqi r15, 2
+ l.bf 2f
+ l.addi r19, r3, 2 // src += 2
+
+ /* lsb == 01 */
+ l.sb 2(r3), r13 // *(src+2) = c
+ l.addi r17, r17, -1 // Decrease n
+ l.addi r19, r3, 3 // src += 3
+
+ /* Word copy loop */
+2: l.sw 0(r19), r13 // *src = cccc
+ l.addi r17, r17, -4 // Decrease n
+ l.sfgeui r17, 4
+ l.bf 2b
+ l.addi r19, r19, 4 // Increase src
+
+ /* When n > 0, copy the remaining bytes, otherwise jump to exit */
+ l.sfeqi r17, 0
+ l.bf 4f
+
+ /* Byte copy loop */
+3: l.addi r17, r17, -1 // Decrease n
+ l.sb 0(r19), r13 // *src = cccc
+ l.sfnei r17, 0
+ l.bf 3b
+ l.addi r19, r19, 1 // Increase src
+
+4: l.jr r9
+ l.ori r11, r3, 0
diff --git a/arch/openrisc/lib/string.S b/arch/openrisc/lib/string.S
new file mode 100644
index 0000000000..74046f2eb6
--- /dev/null
+++ b/arch/openrisc/lib/string.S
@@ -0,0 +1,101 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenRISC string.S
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#include <linux/linkage.h>
+#include <asm/errno.h>
+
+ /*
+ * this can be optimized by doing gcc inline assemlby with
+ * proper constraints (no need to save args registers...)
+ *
+ */
+
+
+/*
+ *
+ * int __copy_tofrom_user(void *to, const void *from, unsigned long size);
+ *
+ * NOTE: it returns number of bytes NOT copied !!!
+ *
+ */
+ .global __copy_tofrom_user
+__copy_tofrom_user:
+ l.addi r1,r1,-12
+ l.sw 0(r1),r6
+ l.sw 4(r1),r4
+ l.sw 8(r1),r3
+
+ l.addi r11,r5,0
+2: l.sfeq r11,r0
+ l.bf 1f
+ l.addi r11,r11,-1
+8: l.lbz r6,0(r4)
+9: l.sb 0(r3),r6
+ l.addi r3,r3,1
+ l.j 2b
+ l.addi r4,r4,1
+1:
+ l.addi r11,r11,1 // r11 holds the return value
+
+ l.lwz r6,0(r1)
+ l.lwz r4,4(r1)
+ l.lwz r3,8(r1)
+ l.jr r9
+ l.addi r1,r1,12
+
+ .section .fixup, "ax"
+99:
+ l.j 1b
+ l.nop
+ .previous
+
+ .section __ex_table, "a"
+ .long 8b, 99b // read fault
+ .long 9b, 99b // write fault
+ .previous
+
+/*
+ * unsigned long clear_user(void *addr, unsigned long size) ;
+ *
+ * NOTE: it returns number of bytes NOT cleared !!!
+ */
+ .global __clear_user
+__clear_user:
+ l.addi r1,r1,-8
+ l.sw 0(r1),r4
+ l.sw 4(r1),r3
+
+2: l.sfeq r4,r0
+ l.bf 1f
+ l.addi r4,r4,-1
+9: l.sb 0(r3),r0
+ l.j 2b
+ l.addi r3,r3,1
+
+1:
+ l.addi r11,r4,1
+
+ l.lwz r4,0(r1)
+ l.lwz r3,4(r1)
+ l.jr r9
+ l.addi r1,r1,8
+
+ .section .fixup, "ax"
+99:
+ l.j 1b
+ l.nop
+ .previous
+
+ .section __ex_table, "a"
+ .long 9b, 99b // write fault
+ .previous
diff --git a/arch/openrisc/mm/Makefile b/arch/openrisc/mm/Makefile
new file mode 100644
index 0000000000..8a0e580e22
--- /dev/null
+++ b/arch/openrisc/mm/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the linux openrisc-specific parts of the memory manager.
+#
+
+obj-y := fault.o cache.o tlb.o init.o ioremap.o
diff --git a/arch/openrisc/mm/cache.c b/arch/openrisc/mm/cache.c
new file mode 100644
index 0000000000..eb43b73f38
--- /dev/null
+++ b/arch/openrisc/mm/cache.c
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC cache.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2015 Jan Henrik Weinstock <jan.weinstock@rwth-aachen.de>
+ */
+
+#include <asm/spr.h>
+#include <asm/spr_defs.h>
+#include <asm/cache.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+static __always_inline void cache_loop(struct page *page, const unsigned int reg)
+{
+ unsigned long paddr = page_to_pfn(page) << PAGE_SHIFT;
+ unsigned long line = paddr & ~(L1_CACHE_BYTES - 1);
+
+ while (line < paddr + PAGE_SIZE) {
+ mtspr(reg, line);
+ line += L1_CACHE_BYTES;
+ }
+}
+
+void local_dcache_page_flush(struct page *page)
+{
+ cache_loop(page, SPR_DCBFR);
+}
+EXPORT_SYMBOL(local_dcache_page_flush);
+
+void local_icache_page_inv(struct page *page)
+{
+ cache_loop(page, SPR_ICBIR);
+}
+EXPORT_SYMBOL(local_icache_page_inv);
+
+void update_cache(struct vm_area_struct *vma, unsigned long address,
+ pte_t *pte)
+{
+ unsigned long pfn = pte_val(*pte) >> PAGE_SHIFT;
+ struct folio *folio = page_folio(pfn_to_page(pfn));
+ int dirty = !test_and_set_bit(PG_dc_clean, &folio->flags);
+
+ /*
+ * Since icaches do not snoop for updated data on OpenRISC, we
+ * must write back and invalidate any dirty pages manually. We
+ * can skip data pages, since they will not end up in icaches.
+ */
+ if ((vma->vm_flags & VM_EXEC) && dirty) {
+ unsigned int nr = folio_nr_pages(folio);
+
+ while (nr--)
+ sync_icache_dcache(folio_page(folio, nr));
+ }
+}
+
diff --git a/arch/openrisc/mm/fault.c b/arch/openrisc/mm/fault.c
new file mode 100644
index 0000000000..29e232d78d
--- /dev/null
+++ b/arch/openrisc/mm/fault.c
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC fault.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/extable.h>
+#include <linux/sched/signal.h>
+#include <linux/perf_event.h>
+
+#include <linux/uaccess.h>
+#include <asm/bug.h>
+#include <asm/mmu_context.h>
+#include <asm/siginfo.h>
+#include <asm/signal.h>
+
+#define NUM_TLB_ENTRIES 64
+#define TLB_OFFSET(add) (((add) >> PAGE_SHIFT) & (NUM_TLB_ENTRIES-1))
+
+/* __PHX__ :: - check the vmalloc_fault in do_page_fault()
+ * - also look into include/asm/mmu_context.h
+ */
+volatile pgd_t *current_pgd[NR_CPUS];
+
+asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long address,
+ unsigned long vector, int write_acc);
+
+/*
+ * This routine handles page faults. It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ *
+ * If this routine detects a bad access, it returns 1, otherwise it
+ * returns 0.
+ */
+
+asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long address,
+ unsigned long vector, int write_acc)
+{
+ struct task_struct *tsk;
+ struct mm_struct *mm;
+ struct vm_area_struct *vma;
+ int si_code;
+ vm_fault_t fault;
+ unsigned int flags = FAULT_FLAG_DEFAULT;
+
+ tsk = current;
+
+ /*
+ * We fault-in kernel-space virtual memory on-demand. The
+ * 'reference' page table is init_mm.pgd.
+ *
+ * NOTE! We MUST NOT take any locks for this case. We may
+ * be in an interrupt or a critical region, and should
+ * only copy the information from the master page table,
+ * nothing more.
+ *
+ * NOTE2: This is done so that, when updating the vmalloc
+ * mappings we don't have to walk all processes pgdirs and
+ * add the high mappings all at once. Instead we do it as they
+ * are used. However vmalloc'ed page entries have the PAGE_GLOBAL
+ * bit set so sometimes the TLB can use a lingering entry.
+ *
+ * This verifies that the fault happens in kernel space
+ * and that the fault was not a protection error.
+ */
+
+ if (address >= VMALLOC_START &&
+ (vector != 0x300 && vector != 0x400) &&
+ !user_mode(regs))
+ goto vmalloc_fault;
+
+ /* If exceptions were enabled, we can reenable them here */
+ if (user_mode(regs)) {
+ /* Exception was in userspace: reenable interrupts */
+ local_irq_enable();
+ flags |= FAULT_FLAG_USER;
+ } else {
+ /* If exception was in a syscall, then IRQ's may have
+ * been enabled or disabled. If they were enabled,
+ * reenable them.
+ */
+ if (regs->sr && (SPR_SR_IEE | SPR_SR_TEE))
+ local_irq_enable();
+ }
+
+ mm = tsk->mm;
+ si_code = SEGV_MAPERR;
+
+ /*
+ * If we're in an interrupt or have no user
+ * context, we must not take the fault..
+ */
+
+ if (in_interrupt() || !mm)
+ goto no_context;
+
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
+
+retry:
+ mmap_read_lock(mm);
+ vma = find_vma(mm, address);
+
+ if (!vma)
+ goto bad_area;
+
+ if (vma->vm_start <= address)
+ goto good_area;
+
+ if (!(vma->vm_flags & VM_GROWSDOWN))
+ goto bad_area;
+
+ if (user_mode(regs)) {
+ /*
+ * accessing the stack below usp is always a bug.
+ * we get page-aligned addresses so we can only check
+ * if we're within a page from usp, but that might be
+ * enough to catch brutal errors at least.
+ */
+ if (address + PAGE_SIZE < regs->sp)
+ goto bad_area;
+ }
+ vma = expand_stack(mm, address);
+ if (!vma)
+ goto bad_area_nosemaphore;
+
+ /*
+ * Ok, we have a good vm_area for this memory access, so
+ * we can handle it..
+ */
+
+good_area:
+ si_code = SEGV_ACCERR;
+
+ /* first do some preliminary protection checks */
+
+ if (write_acc) {
+ if (!(vma->vm_flags & VM_WRITE))
+ goto bad_area;
+ flags |= FAULT_FLAG_WRITE;
+ } else {
+ /* not present */
+ if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+ goto bad_area;
+ }
+
+ /* are we trying to execute nonexecutable area */
+ if ((vector == 0x400) && !(vma->vm_page_prot.pgprot & _PAGE_EXEC))
+ goto bad_area;
+
+ /*
+ * If for any reason at all we couldn't handle the fault,
+ * make sure we exit gracefully rather than endlessly redo
+ * the fault.
+ */
+
+ fault = handle_mm_fault(vma, address, flags, regs);
+
+ if (fault_signal_pending(fault, regs)) {
+ if (!user_mode(regs))
+ goto no_context;
+ return;
+ }
+
+ /* The fault is fully completed (including releasing mmap lock) */
+ if (fault & VM_FAULT_COMPLETED)
+ return;
+
+ if (unlikely(fault & VM_FAULT_ERROR)) {
+ if (fault & VM_FAULT_OOM)
+ goto out_of_memory;
+ else if (fault & VM_FAULT_SIGSEGV)
+ goto bad_area;
+ else if (fault & VM_FAULT_SIGBUS)
+ goto do_sigbus;
+ BUG();
+ }
+
+ /*RGD modeled on Cris */
+ if (fault & VM_FAULT_RETRY) {
+ flags |= FAULT_FLAG_TRIED;
+
+ /* No need to mmap_read_unlock(mm) as we would
+ * have already released it in __lock_page_or_retry
+ * in mm/filemap.c.
+ */
+
+ goto retry;
+ }
+
+ mmap_read_unlock(mm);
+ return;
+
+ /*
+ * Something tried to access memory that isn't in our memory map..
+ * Fix it, but check if it's kernel or user first..
+ */
+
+bad_area:
+ mmap_read_unlock(mm);
+
+bad_area_nosemaphore:
+
+ /* User mode accesses just cause a SIGSEGV */
+
+ if (user_mode(regs)) {
+ force_sig_fault(SIGSEGV, si_code, (void __user *)address);
+ return;
+ }
+
+no_context:
+
+ /* Are we prepared to handle this kernel fault?
+ *
+ * (The kernel has valid exception-points in the source
+ * when it acesses user-memory. When it fails in one
+ * of those points, we find it in a table and do a jump
+ * to some fixup code that loads an appropriate error
+ * code)
+ */
+
+ {
+ const struct exception_table_entry *entry;
+
+ if ((entry = search_exception_tables(regs->pc)) != NULL) {
+ /* Adjust the instruction pointer in the stackframe */
+ regs->pc = entry->fixup;
+ return;
+ }
+ }
+
+ /*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+
+ if ((unsigned long)(address) < PAGE_SIZE)
+ printk(KERN_ALERT
+ "Unable to handle kernel NULL pointer dereference");
+ else
+ printk(KERN_ALERT "Unable to handle kernel access");
+ printk(" at virtual address 0x%08lx\n", address);
+
+ die("Oops", regs, write_acc);
+
+ /*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+
+out_of_memory:
+ mmap_read_unlock(mm);
+ if (!user_mode(regs))
+ goto no_context;
+ pagefault_out_of_memory();
+ return;
+
+do_sigbus:
+ mmap_read_unlock(mm);
+
+ /*
+ * Send a sigbus, regardless of whether we were in kernel
+ * or user mode.
+ */
+ force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *)address);
+
+ /* Kernel mode? Handle exceptions or die */
+ if (!user_mode(regs))
+ goto no_context;
+ return;
+
+vmalloc_fault:
+ {
+ /*
+ * Synchronize this task's top level page-table
+ * with the 'reference' page table.
+ *
+ * Use current_pgd instead of tsk->active_mm->pgd
+ * since the latter might be unavailable if this
+ * code is executed in a misfortunately run irq
+ * (like inside schedule() between switch_mm and
+ * switch_to...).
+ */
+
+ int offset = pgd_index(address);
+ pgd_t *pgd, *pgd_k;
+ p4d_t *p4d, *p4d_k;
+ pud_t *pud, *pud_k;
+ pmd_t *pmd, *pmd_k;
+ pte_t *pte_k;
+
+/*
+ phx_warn("do_page_fault(): vmalloc_fault will not work, "
+ "since current_pgd assign a proper value somewhere\n"
+ "anyhow we don't need this at the moment\n");
+
+ phx_mmu("vmalloc_fault");
+*/
+ pgd = (pgd_t *)current_pgd[smp_processor_id()] + offset;
+ pgd_k = init_mm.pgd + offset;
+
+ /* Since we're two-level, we don't need to do both
+ * set_pgd and set_pmd (they do the same thing). If
+ * we go three-level at some point, do the right thing
+ * with pgd_present and set_pgd here.
+ *
+ * Also, since the vmalloc area is global, we don't
+ * need to copy individual PTE's, it is enough to
+ * copy the pgd pointer into the pte page of the
+ * root task. If that is there, we'll find our pte if
+ * it exists.
+ */
+
+ p4d = p4d_offset(pgd, address);
+ p4d_k = p4d_offset(pgd_k, address);
+ if (!p4d_present(*p4d_k))
+ goto no_context;
+
+ pud = pud_offset(p4d, address);
+ pud_k = pud_offset(p4d_k, address);
+ if (!pud_present(*pud_k))
+ goto no_context;
+
+ pmd = pmd_offset(pud, address);
+ pmd_k = pmd_offset(pud_k, address);
+
+ if (!pmd_present(*pmd_k))
+ goto bad_area_nosemaphore;
+
+ set_pmd(pmd, *pmd_k);
+
+ /* Make sure the actual PTE exists as well to
+ * catch kernel vmalloc-area accesses to non-mapped
+ * addresses. If we don't do this, this will just
+ * silently loop forever.
+ */
+
+ pte_k = pte_offset_kernel(pmd_k, address);
+ if (!pte_present(*pte_k))
+ goto no_context;
+
+ return;
+ }
+}
diff --git a/arch/openrisc/mm/init.c b/arch/openrisc/mm/init.c
new file mode 100644
index 0000000000..1dcd78c8f0
--- /dev/null
+++ b/arch/openrisc/mm/init.c
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC idle.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/memblock.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pagemap.h>
+
+#include <asm/pgalloc.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/tlb.h>
+#include <asm/mmu_context.h>
+#include <asm/fixmap.h>
+#include <asm/tlbflush.h>
+#include <asm/sections.h>
+
+int mem_init_done;
+
+static void __init zone_sizes_init(void)
+{
+ unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
+
+ /*
+ * We use only ZONE_NORMAL
+ */
+ max_zone_pfn[ZONE_NORMAL] = max_low_pfn;
+
+ free_area_init(max_zone_pfn);
+}
+
+extern const char _s_kernel_ro[], _e_kernel_ro[];
+
+/*
+ * Map all physical memory into kernel's address space.
+ *
+ * This is explicitly coded for two-level page tables, so if you need
+ * something else then this needs to change.
+ */
+static void __init map_ram(void)
+{
+ phys_addr_t start, end;
+ unsigned long v, p, e;
+ pgprot_t prot;
+ pgd_t *pge;
+ p4d_t *p4e;
+ pud_t *pue;
+ pmd_t *pme;
+ pte_t *pte;
+ u64 i;
+ /* These mark extents of read-only kernel pages...
+ * ...from vmlinux.lds.S
+ */
+
+ v = PAGE_OFFSET;
+
+ for_each_mem_range(i, &start, &end) {
+ p = (u32) start & PAGE_MASK;
+ e = (u32) end;
+
+ v = (u32) __va(p);
+ pge = pgd_offset_k(v);
+
+ while (p < e) {
+ int j;
+ p4e = p4d_offset(pge, v);
+ pue = pud_offset(p4e, v);
+ pme = pmd_offset(pue, v);
+
+ if ((u32) pue != (u32) pge || (u32) pme != (u32) pge) {
+ panic("%s: OR1K kernel hardcoded for "
+ "two-level page tables",
+ __func__);
+ }
+
+ /* Alloc one page for holding PTE's... */
+ pte = memblock_alloc_raw(PAGE_SIZE, PAGE_SIZE);
+ if (!pte)
+ panic("%s: Failed to allocate page for PTEs\n",
+ __func__);
+ set_pmd(pme, __pmd(_KERNPG_TABLE + __pa(pte)));
+
+ /* Fill the newly allocated page with PTE'S */
+ for (j = 0; p < e && j < PTRS_PER_PTE;
+ v += PAGE_SIZE, p += PAGE_SIZE, j++, pte++) {
+ if (v >= (u32) _e_kernel_ro ||
+ v < (u32) _s_kernel_ro)
+ prot = PAGE_KERNEL;
+ else
+ prot = PAGE_KERNEL_RO;
+
+ set_pte(pte, mk_pte_phys(p, prot));
+ }
+
+ pge++;
+ }
+
+ printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__,
+ start, end);
+ }
+}
+
+void __init paging_init(void)
+{
+ int i;
+
+ printk(KERN_INFO "Setting up paging and PTEs.\n");
+
+ /* clear out the init_mm.pgd that will contain the kernel's mappings */
+
+ for (i = 0; i < PTRS_PER_PGD; i++)
+ swapper_pg_dir[i] = __pgd(0);
+
+ /* make sure the current pgd table points to something sane
+ * (even if it is most probably not used until the next
+ * switch_mm)
+ */
+ current_pgd[smp_processor_id()] = init_mm.pgd;
+
+ map_ram();
+
+ zone_sizes_init();
+
+ /* self modifying code ;) */
+ /* Since the old TLB miss handler has been running up until now,
+ * the kernel pages are still all RW, so we can still modify the
+ * text directly... after this change and a TLB flush, the kernel
+ * pages will become RO.
+ */
+ {
+ extern unsigned long dtlb_miss_handler;
+ extern unsigned long itlb_miss_handler;
+
+ unsigned long *dtlb_vector = __va(0x900);
+ unsigned long *itlb_vector = __va(0xa00);
+
+ printk(KERN_INFO "itlb_miss_handler %p\n", &itlb_miss_handler);
+ *itlb_vector = ((unsigned long)&itlb_miss_handler -
+ (unsigned long)itlb_vector) >> 2;
+
+ /* Soft ordering constraint to ensure that dtlb_vector is
+ * the last thing updated
+ */
+ barrier();
+
+ printk(KERN_INFO "dtlb_miss_handler %p\n", &dtlb_miss_handler);
+ *dtlb_vector = ((unsigned long)&dtlb_miss_handler -
+ (unsigned long)dtlb_vector) >> 2;
+
+ }
+
+ /* Soft ordering constraint to ensure that cache invalidation and
+ * TLB flush really happen _after_ code has been modified.
+ */
+ barrier();
+
+ /* Invalidate instruction caches after code modification */
+ mtspr(SPR_ICBIR, 0x900);
+ mtspr(SPR_ICBIR, 0xa00);
+
+ /* New TLB miss handlers and kernel page tables are in now place.
+ * Make sure that page flags get updated for all pages in TLB by
+ * flushing the TLB and forcing all TLB entries to be recreated
+ * from their page table flags.
+ */
+ flush_tlb_all();
+}
+
+/* References to section boundaries */
+
+void __init mem_init(void)
+{
+ BUG_ON(!mem_map);
+
+ max_mapnr = max_low_pfn;
+ high_memory = (void *)__va(max_low_pfn * PAGE_SIZE);
+
+ /* clear the zero-page */
+ memset((void *)empty_zero_page, 0, PAGE_SIZE);
+
+ /* this will put all low memory onto the freelists */
+ memblock_free_all();
+
+ printk("mem_init_done ...........................................\n");
+ mem_init_done = 1;
+ return;
+}
+
+static const pgprot_t protection_map[16] = {
+ [VM_NONE] = PAGE_NONE,
+ [VM_READ] = PAGE_READONLY_X,
+ [VM_WRITE] = PAGE_COPY,
+ [VM_WRITE | VM_READ] = PAGE_COPY_X,
+ [VM_EXEC] = PAGE_READONLY,
+ [VM_EXEC | VM_READ] = PAGE_READONLY_X,
+ [VM_EXEC | VM_WRITE] = PAGE_COPY,
+ [VM_EXEC | VM_WRITE | VM_READ] = PAGE_COPY_X,
+ [VM_SHARED] = PAGE_NONE,
+ [VM_SHARED | VM_READ] = PAGE_READONLY_X,
+ [VM_SHARED | VM_WRITE] = PAGE_SHARED,
+ [VM_SHARED | VM_WRITE | VM_READ] = PAGE_SHARED_X,
+ [VM_SHARED | VM_EXEC] = PAGE_READONLY,
+ [VM_SHARED | VM_EXEC | VM_READ] = PAGE_READONLY_X,
+ [VM_SHARED | VM_EXEC | VM_WRITE] = PAGE_SHARED,
+ [VM_SHARED | VM_EXEC | VM_WRITE | VM_READ] = PAGE_SHARED_X
+};
+DECLARE_VM_GET_PAGE_PROT
diff --git a/arch/openrisc/mm/ioremap.c b/arch/openrisc/mm/ioremap.c
new file mode 100644
index 0000000000..f59ea4c10b
--- /dev/null
+++ b/arch/openrisc/mm/ioremap.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC ioremap.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#include <linux/vmalloc.h>
+#include <linux/io.h>
+#include <linux/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/fixmap.h>
+#include <asm/bug.h>
+#include <linux/sched.h>
+#include <asm/tlbflush.h>
+
+extern int mem_init_done;
+
+/*
+ * OK, this one's a bit tricky... ioremap can get called before memory is
+ * initialized (early serial console does this) and will want to alloc a page
+ * for its mapping. No userspace pages will ever get allocated before memory
+ * is initialized so this applies only to kernel pages. In the event that
+ * this is called before memory is initialized we allocate the page using
+ * the memblock infrastructure.
+ */
+
+pte_t __ref *pte_alloc_one_kernel(struct mm_struct *mm)
+{
+ pte_t *pte;
+
+ if (likely(mem_init_done)) {
+ pte = (pte_t *)get_zeroed_page(GFP_KERNEL);
+ } else {
+ pte = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
+ if (!pte)
+ panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
+ __func__, PAGE_SIZE, PAGE_SIZE);
+ }
+
+ return pte;
+}
diff --git a/arch/openrisc/mm/tlb.c b/arch/openrisc/mm/tlb.c
new file mode 100644
index 0000000000..3115f2e4f8
--- /dev/null
+++ b/arch/openrisc/mm/tlb.c
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC tlb.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Julius Baxter <julius.baxter@orsoc.se>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+#include <asm/spr_defs.h>
+
+#define NO_CONTEXT -1
+
+#define NUM_DTLB_SETS (1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> \
+ SPR_DMMUCFGR_NTS_OFF))
+#define NUM_ITLB_SETS (1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> \
+ SPR_IMMUCFGR_NTS_OFF))
+#define DTLB_OFFSET(addr) (((addr) >> PAGE_SHIFT) & (NUM_DTLB_SETS-1))
+#define ITLB_OFFSET(addr) (((addr) >> PAGE_SHIFT) & (NUM_ITLB_SETS-1))
+/*
+ * Invalidate all TLB entries.
+ *
+ * This comes down to setting the 'valid' bit for all xTLBMR registers to 0.
+ * Easiest way to accomplish this is to just zero out the xTLBMR register
+ * completely.
+ *
+ */
+
+void local_flush_tlb_all(void)
+{
+ int i;
+ unsigned long num_tlb_sets;
+
+ /* Determine number of sets for IMMU. */
+ /* FIXME: Assumption is I & D nsets equal. */
+ num_tlb_sets = NUM_ITLB_SETS;
+
+ for (i = 0; i < num_tlb_sets; i++) {
+ mtspr_off(SPR_DTLBMR_BASE(0), i, 0);
+ mtspr_off(SPR_ITLBMR_BASE(0), i, 0);
+ }
+}
+
+#define have_dtlbeir (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_TEIRI)
+#define have_itlbeir (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_TEIRI)
+
+/*
+ * Invalidate a single page. This is what the xTLBEIR register is for.
+ *
+ * There's no point in checking the vma for PAGE_EXEC to determine whether it's
+ * the data or instruction TLB that should be flushed... that would take more
+ * than the few instructions that the following compiles down to!
+ *
+ * The case where we don't have the xTLBEIR register really only works for
+ * MMU's with a single way and is hard-coded that way.
+ */
+
+#define flush_dtlb_page_eir(addr) mtspr(SPR_DTLBEIR, addr)
+#define flush_dtlb_page_no_eir(addr) \
+ mtspr_off(SPR_DTLBMR_BASE(0), DTLB_OFFSET(addr), 0);
+
+#define flush_itlb_page_eir(addr) mtspr(SPR_ITLBEIR, addr)
+#define flush_itlb_page_no_eir(addr) \
+ mtspr_off(SPR_ITLBMR_BASE(0), ITLB_OFFSET(addr), 0);
+
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+ if (have_dtlbeir)
+ flush_dtlb_page_eir(addr);
+ else
+ flush_dtlb_page_no_eir(addr);
+
+ if (have_itlbeir)
+ flush_itlb_page_eir(addr);
+ else
+ flush_itlb_page_no_eir(addr);
+}
+
+void local_flush_tlb_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end)
+{
+ int addr;
+ bool dtlbeir;
+ bool itlbeir;
+
+ dtlbeir = have_dtlbeir;
+ itlbeir = have_itlbeir;
+
+ for (addr = start; addr < end; addr += PAGE_SIZE) {
+ if (dtlbeir)
+ flush_dtlb_page_eir(addr);
+ else
+ flush_dtlb_page_no_eir(addr);
+
+ if (itlbeir)
+ flush_itlb_page_eir(addr);
+ else
+ flush_itlb_page_no_eir(addr);
+ }
+}
+
+/*
+ * Invalidate the selected mm context only.
+ *
+ * FIXME: Due to some bug here, we're flushing everything for now.
+ * This should be changed to loop over over mm and call flush_tlb_range.
+ */
+
+void local_flush_tlb_mm(struct mm_struct *mm)
+{
+
+ /* Was seeing bugs with the mm struct passed to us. Scrapped most of
+ this function. */
+ /* Several architectures do this */
+ local_flush_tlb_all();
+}
+
+/* called in schedule() just before actually doing the switch_to */
+
+void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *next_tsk)
+{
+ unsigned int cpu;
+
+ if (unlikely(prev == next))
+ return;
+
+ cpu = smp_processor_id();
+
+ cpumask_clear_cpu(cpu, mm_cpumask(prev));
+ cpumask_set_cpu(cpu, mm_cpumask(next));
+
+ /* remember the pgd for the fault handlers
+ * this is similar to the pgd register in some other CPU's.
+ * we need our own copy of it because current and active_mm
+ * might be invalid at points where we still need to derefer
+ * the pgd.
+ */
+ current_pgd[cpu] = next->pgd;
+
+ /* We don't have context support implemented, so flush all
+ * entries belonging to previous map
+ */
+ local_flush_tlb_mm(prev);
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+
+int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ mm->context = NO_CONTEXT;
+ return 0;
+}
+
+/* called by __exit_mm to destroy the used MMU context if any before
+ * destroying the mm itself. this is only called when the last user of the mm
+ * drops it.
+ */
+
+void destroy_context(struct mm_struct *mm)
+{
+ flush_tlb_mm(mm);
+
+}