diff options
Diffstat (limited to 'arch/powerpc/boot/4xx.c')
-rw-r--r-- | arch/powerpc/boot/4xx.c | 799 |
1 files changed, 799 insertions, 0 deletions
diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c new file mode 100644 index 0000000000..00c4d843a0 --- /dev/null +++ b/arch/powerpc/boot/4xx.c @@ -0,0 +1,799 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2007 David Gibson, IBM Corporation. + * + * Based on earlier code: + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * Copyright (c) 2003, 2004 Zultys Technologies + * + * Copyright (C) 2009 Wind River Systems, Inc. + * Updated for supporting PPC405EX on Kilauea. + * Tiejun Chen <tiejun.chen@windriver.com> + */ +#include <stddef.h> +#include "types.h" +#include "string.h" +#include "stdio.h" +#include "ops.h" +#include "reg.h" +#include "dcr.h" + +static unsigned long chip_11_errata(unsigned long memsize) +{ + unsigned long pvr; + + pvr = mfpvr(); + + switch (pvr & 0xf0000ff0) { + case 0x40000850: + case 0x400008d0: + case 0x200008d0: + memsize -= 4096; + break; + default: + break; + } + + return memsize; +} + +/* Read the 4xx SDRAM controller to get size of system memory. */ +void ibm4xx_sdram_fixup_memsize(void) +{ + int i; + unsigned long memsize, bank_config; + + memsize = 0; + for (i = 0; i < ARRAY_SIZE(sdram_bxcr); i++) { + bank_config = SDRAM0_READ(sdram_bxcr[i]); + if (bank_config & SDRAM_CONFIG_BANK_ENABLE) + memsize += SDRAM_CONFIG_BANK_SIZE(bank_config); + } + + memsize = chip_11_errata(memsize); + dt_fixup_memory(0, memsize); +} + +/* Read the 440SPe MQ controller to get size of system memory. */ +#define DCRN_MQ0_B0BAS 0x40 +#define DCRN_MQ0_B1BAS 0x41 +#define DCRN_MQ0_B2BAS 0x42 +#define DCRN_MQ0_B3BAS 0x43 + +static u64 ibm440spe_decode_bas(u32 bas) +{ + u64 base = ((u64)(bas & 0xFFE00000u)) << 2; + + /* open coded because I'm paranoid about invalid values */ + switch ((bas >> 4) & 0xFFF) { + case 0: + return 0; + case 0xffc: + return base + 0x000800000ull; + case 0xff8: + return base + 0x001000000ull; + case 0xff0: + return base + 0x002000000ull; + case 0xfe0: + return base + 0x004000000ull; + case 0xfc0: + return base + 0x008000000ull; + case 0xf80: + return base + 0x010000000ull; + case 0xf00: + return base + 0x020000000ull; + case 0xe00: + return base + 0x040000000ull; + case 0xc00: + return base + 0x080000000ull; + case 0x800: + return base + 0x100000000ull; + } + printf("Memory BAS value 0x%08x unsupported !\n", bas); + return 0; +} + +void ibm440spe_fixup_memsize(void) +{ + u64 banktop, memsize = 0; + + /* Ultimately, we should directly construct the memory node + * so we are able to handle holes in the memory address space + */ + banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B0BAS)); + if (banktop > memsize) + memsize = banktop; + banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B1BAS)); + if (banktop > memsize) + memsize = banktop; + banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B2BAS)); + if (banktop > memsize) + memsize = banktop; + banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B3BAS)); + if (banktop > memsize) + memsize = banktop; + + dt_fixup_memory(0, memsize); +} + + +/* 4xx DDR1/2 Denali memory controller support */ +/* DDR0 registers */ +#define DDR0_02 2 +#define DDR0_08 8 +#define DDR0_10 10 +#define DDR0_14 14 +#define DDR0_42 42 +#define DDR0_43 43 + +/* DDR0_02 */ +#define DDR_START 0x1 +#define DDR_START_SHIFT 0 +#define DDR_MAX_CS_REG 0x3 +#define DDR_MAX_CS_REG_SHIFT 24 +#define DDR_MAX_COL_REG 0xf +#define DDR_MAX_COL_REG_SHIFT 16 +#define DDR_MAX_ROW_REG 0xf +#define DDR_MAX_ROW_REG_SHIFT 8 +/* DDR0_08 */ +#define DDR_DDR2_MODE 0x1 +#define DDR_DDR2_MODE_SHIFT 0 +/* DDR0_10 */ +#define DDR_CS_MAP 0x3 +#define DDR_CS_MAP_SHIFT 8 +/* DDR0_14 */ +#define DDR_REDUC 0x1 +#define DDR_REDUC_SHIFT 16 +/* DDR0_42 */ +#define DDR_APIN 0x7 +#define DDR_APIN_SHIFT 24 +/* DDR0_43 */ +#define DDR_COL_SZ 0x7 +#define DDR_COL_SZ_SHIFT 8 +#define DDR_BANK8 0x1 +#define DDR_BANK8_SHIFT 0 + +#define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask)) + +/* + * Some U-Boot versions set the number of chipselects to two + * for Sequoia/Rainier boards while they only have one chipselect + * hardwired. Hardcode the number of chipselects to one + * for sequioa/rainer board models or read the actual value + * from the memory controller register DDR0_10 otherwise. + */ +static inline u32 ibm4xx_denali_get_cs(void) +{ + void *devp; + char model[64]; + u32 val, cs; + + devp = finddevice("/"); + if (!devp) + goto read_cs; + + if (getprop(devp, "model", model, sizeof(model)) <= 0) + goto read_cs; + + model[sizeof(model)-1] = 0; + + if (!strcmp(model, "amcc,sequoia") || + !strcmp(model, "amcc,rainier")) + return 1; + +read_cs: + /* get CS value */ + val = SDRAM0_READ(DDR0_10); + + val = DDR_GET_VAL(val, DDR_CS_MAP, DDR_CS_MAP_SHIFT); + cs = 0; + while (val) { + if (val & 0x1) + cs++; + val = val >> 1; + } + return cs; +} + +void ibm4xx_denali_fixup_memsize(void) +{ + u32 val, max_cs, max_col, max_row; + u32 cs, col, row, bank, dpath; + unsigned long memsize; + + val = SDRAM0_READ(DDR0_02); + if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT)) + fatal("DDR controller is not initialized\n"); + + /* get maximum cs col and row values */ + max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT); + max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT); + max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT); + + cs = ibm4xx_denali_get_cs(); + if (!cs) + fatal("No memory installed\n"); + if (cs > max_cs) + fatal("DDR wrong CS configuration\n"); + + /* get data path bytes */ + val = SDRAM0_READ(DDR0_14); + + if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT)) + dpath = 4; /* 32 bits */ + else + dpath = 8; /* 64 bits */ + + /* get address pins (rows) */ + val = SDRAM0_READ(DDR0_42); + + row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT); + if (row > max_row) + fatal("DDR wrong APIN configuration\n"); + row = max_row - row; + + /* get collomn size and banks */ + val = SDRAM0_READ(DDR0_43); + + col = DDR_GET_VAL(val, DDR_COL_SZ, DDR_COL_SZ_SHIFT); + if (col > max_col) + fatal("DDR wrong COL configuration\n"); + col = max_col - col; + + if (DDR_GET_VAL(val, DDR_BANK8, DDR_BANK8_SHIFT)) + bank = 8; /* 8 banks */ + else + bank = 4; /* 4 banks */ + + memsize = cs * (1 << (col+row)) * bank * dpath; + memsize = chip_11_errata(memsize); + dt_fixup_memory(0, memsize); +} + +#define SPRN_DBCR0_40X 0x3F2 +#define SPRN_DBCR0_44X 0x134 +#define DBCR0_RST_SYSTEM 0x30000000 + +void ibm44x_dbcr_reset(void) +{ + unsigned long tmp; + + asm volatile ( + "mfspr %0,%1\n" + "oris %0,%0,%2@h\n" + "mtspr %1,%0" + : "=&r"(tmp) : "i"(SPRN_DBCR0_44X), "i"(DBCR0_RST_SYSTEM) + ); + +} + +void ibm40x_dbcr_reset(void) +{ + unsigned long tmp; + + asm volatile ( + "mfspr %0,%1\n" + "oris %0,%0,%2@h\n" + "mtspr %1,%0" + : "=&r"(tmp) : "i"(SPRN_DBCR0_40X), "i"(DBCR0_RST_SYSTEM) + ); +} + +#define EMAC_RESET 0x20000000 +void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1) +{ + /* Quiesce the MAL and EMAC(s) since PIBS/OpenBIOS don't + * do this for us + */ + if (emac0) + *emac0 = EMAC_RESET; + if (emac1) + *emac1 = EMAC_RESET; + + mtdcr(DCRN_MAL0_CFG, MAL_RESET); + while (mfdcr(DCRN_MAL0_CFG) & MAL_RESET) + ; /* loop until reset takes effect */ +} + +/* Read 4xx EBC bus bridge registers to get mappings of the peripheral + * banks into the OPB address space */ +void ibm4xx_fixup_ebc_ranges(const char *ebc) +{ + void *devp; + u32 bxcr; + u32 ranges[EBC_NUM_BANKS*4]; + u32 *p = ranges; + int i; + + for (i = 0; i < EBC_NUM_BANKS; i++) { + mtdcr(DCRN_EBC0_CFGADDR, EBC_BXCR(i)); + bxcr = mfdcr(DCRN_EBC0_CFGDATA); + + if ((bxcr & EBC_BXCR_BU) != EBC_BXCR_BU_OFF) { + *p++ = i; + *p++ = 0; + *p++ = bxcr & EBC_BXCR_BAS; + *p++ = EBC_BXCR_BANK_SIZE(bxcr); + } + } + + devp = finddevice(ebc); + if (! devp) + fatal("Couldn't locate EBC node %s\n\r", ebc); + + setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32)); +} + +/* Calculate 440GP clocks */ +void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk) +{ + u32 sys0 = mfdcr(DCRN_CPC0_SYS0); + u32 cr0 = mfdcr(DCRN_CPC0_CR0); + u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; + u32 opdv = CPC0_SYS0_OPDV(sys0); + u32 epdv = CPC0_SYS0_EPDV(sys0); + + if (sys0 & CPC0_SYS0_BYPASS) { + /* Bypass system PLL */ + cpu = plb = sys_clk; + } else { + if (sys0 & CPC0_SYS0_EXTSL) + /* PerClk */ + m = CPC0_SYS0_FWDVB(sys0) * opdv * epdv; + else + /* CPU clock */ + m = CPC0_SYS0_FBDV(sys0) * CPC0_SYS0_FWDVA(sys0); + cpu = sys_clk * m / CPC0_SYS0_FWDVA(sys0); + plb = sys_clk * m / CPC0_SYS0_FWDVB(sys0); + } + + opb = plb / opdv; + ebc = opb / epdv; + + /* FIXME: Check if this is for all 440GP, or just Ebony */ + if ((mfpvr() & 0xf0000fff) == 0x40000440) + /* Rev. B 440GP, use external system clock */ + tb = sys_clk; + else + /* Rev. C 440GP, errata force us to use internal clock */ + tb = cpu; + + if (cr0 & CPC0_CR0_U0EC) + /* External UART clock */ + uart0 = ser_clk; + else + /* Internal UART clock */ + uart0 = plb / CPC0_CR0_UDIV(cr0); + + if (cr0 & CPC0_CR0_U1EC) + /* External UART clock */ + uart1 = ser_clk; + else + /* Internal UART clock */ + uart1 = plb / CPC0_CR0_UDIV(cr0); + + printf("PPC440GP: SysClk = %dMHz (%x)\n\r", + (sys_clk + 500000) / 1000000, sys_clk); + + dt_fixup_cpu_clocks(cpu, tb, 0); + + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/opb/ebc", ebc); + dt_fixup_clock("/plb/opb/serial@40000200", uart0); + dt_fixup_clock("/plb/opb/serial@40000300", uart1); +} + +#define SPRN_CCR1 0x378 + +static inline u32 __fix_zero(u32 v, u32 def) +{ + return v ? v : def; +} + +static unsigned int __ibm440eplike_fixup_clocks(unsigned int sys_clk, + unsigned int tmr_clk, + int per_clk_from_opb) +{ + /* PLL config */ + u32 pllc = CPR0_READ(DCRN_CPR0_PLLC); + u32 plld = CPR0_READ(DCRN_CPR0_PLLD); + + /* Dividers */ + u32 fbdv = __fix_zero((plld >> 24) & 0x1f, 32); + u32 fwdva = __fix_zero((plld >> 16) & 0xf, 16); + u32 fwdvb = __fix_zero((plld >> 8) & 7, 8); + u32 lfbdv = __fix_zero(plld & 0x3f, 64); + u32 pradv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PRIMAD) >> 24) & 7, 8); + u32 prbdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PRIMBD) >> 24) & 7, 8); + u32 opbdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_OPBD) >> 24) & 3, 4); + u32 perdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PERD) >> 24) & 3, 4); + + /* Input clocks for primary dividers */ + u32 clk_a, clk_b; + + /* Resulting clocks */ + u32 cpu, plb, opb, ebc, vco; + + /* Timebase */ + u32 ccr1, tb = tmr_clk; + + if (pllc & 0x40000000) { + u32 m; + + /* Feedback path */ + switch ((pllc >> 24) & 7) { + case 0: + /* PLLOUTx */ + m = ((pllc & 0x20000000) ? fwdvb : fwdva) * lfbdv; + break; + case 1: + /* CPU */ + m = fwdva * pradv0; + break; + case 5: + /* PERClk */ + m = fwdvb * prbdv0 * opbdv0 * perdv0; + break; + default: + printf("WARNING ! Invalid PLL feedback source !\n"); + goto bypass; + } + m *= fbdv; + vco = sys_clk * m; + clk_a = vco / fwdva; + clk_b = vco / fwdvb; + } else { +bypass: + /* Bypass system PLL */ + vco = 0; + clk_a = clk_b = sys_clk; + } + + cpu = clk_a / pradv0; + plb = clk_b / prbdv0; + opb = plb / opbdv0; + ebc = (per_clk_from_opb ? opb : plb) / perdv0; + + /* Figure out timebase. Either CPU or default TmrClk */ + ccr1 = mfspr(SPRN_CCR1); + + /* If passed a 0 tmr_clk, force CPU clock */ + if (tb == 0) { + ccr1 &= ~0x80u; + mtspr(SPRN_CCR1, ccr1); + } + if ((ccr1 & 0x0080) == 0) + tb = cpu; + + dt_fixup_cpu_clocks(cpu, tb, 0); + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/opb/ebc", ebc); + + return plb; +} + +static void eplike_fixup_uart_clk(int index, const char *path, + unsigned int ser_clk, + unsigned int plb_clk) +{ + unsigned int sdr; + unsigned int clock; + + switch (index) { + case 0: + sdr = SDR0_READ(DCRN_SDR0_UART0); + break; + case 1: + sdr = SDR0_READ(DCRN_SDR0_UART1); + break; + case 2: + sdr = SDR0_READ(DCRN_SDR0_UART2); + break; + case 3: + sdr = SDR0_READ(DCRN_SDR0_UART3); + break; + default: + return; + } + + if (sdr & 0x00800000u) + clock = ser_clk; + else + clock = plb_clk / __fix_zero(sdr & 0xff, 256); + + dt_fixup_clock(path, clock); +} + +void ibm440ep_fixup_clocks(unsigned int sys_clk, + unsigned int ser_clk, + unsigned int tmr_clk) +{ + unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 0); + + /* serial clocks need fixup based on int/ext */ + eplike_fixup_uart_clk(0, "/plb/opb/serial@ef600300", ser_clk, plb_clk); + eplike_fixup_uart_clk(1, "/plb/opb/serial@ef600400", ser_clk, plb_clk); + eplike_fixup_uart_clk(2, "/plb/opb/serial@ef600500", ser_clk, plb_clk); + eplike_fixup_uart_clk(3, "/plb/opb/serial@ef600600", ser_clk, plb_clk); +} + +void ibm440gx_fixup_clocks(unsigned int sys_clk, + unsigned int ser_clk, + unsigned int tmr_clk) +{ + unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1); + + /* serial clocks need fixup based on int/ext */ + eplike_fixup_uart_clk(0, "/plb/opb/serial@40000200", ser_clk, plb_clk); + eplike_fixup_uart_clk(1, "/plb/opb/serial@40000300", ser_clk, plb_clk); +} + +void ibm440spe_fixup_clocks(unsigned int sys_clk, + unsigned int ser_clk, + unsigned int tmr_clk) +{ + unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1); + + /* serial clocks need fixup based on int/ext */ + eplike_fixup_uart_clk(0, "/plb/opb/serial@f0000200", ser_clk, plb_clk); + eplike_fixup_uart_clk(1, "/plb/opb/serial@f0000300", ser_clk, plb_clk); + eplike_fixup_uart_clk(2, "/plb/opb/serial@f0000600", ser_clk, plb_clk); +} + +void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk) +{ + u32 pllmr = mfdcr(DCRN_CPC0_PLLMR); + u32 cpc0_cr0 = mfdcr(DCRN_405_CPC0_CR0); + u32 cpc0_cr1 = mfdcr(DCRN_405_CPC0_CR1); + u32 psr = mfdcr(DCRN_405_CPC0_PSR); + u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; + u32 fwdv, fwdvb, fbdv, cbdv, opdv, epdv, ppdv, udiv; + + fwdv = (8 - ((pllmr & 0xe0000000) >> 29)); + fbdv = (pllmr & 0x1e000000) >> 25; + if (fbdv == 0) + fbdv = 16; + cbdv = ((pllmr & 0x00060000) >> 17) + 1; /* CPU:PLB */ + opdv = ((pllmr & 0x00018000) >> 15) + 1; /* PLB:OPB */ + ppdv = ((pllmr & 0x00006000) >> 13) + 1; /* PLB:PCI */ + epdv = ((pllmr & 0x00001800) >> 11) + 2; /* PLB:EBC */ + udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1; + + /* check for 405GPr */ + if ((mfpvr() & 0xfffffff0) == (0x50910951 & 0xfffffff0)) { + fwdvb = 8 - (pllmr & 0x00000007); + if (!(psr & 0x00001000)) /* PCI async mode enable == 0 */ + if (psr & 0x00000020) /* New mode enable */ + m = fwdvb * 2 * ppdv; + else + m = fwdvb * cbdv * ppdv; + else if (psr & 0x00000020) /* New mode enable */ + if (psr & 0x00000800) /* PerClk synch mode */ + m = fwdvb * 2 * epdv; + else + m = fbdv * fwdv; + else if (epdv == fbdv) + m = fbdv * cbdv * epdv; + else + m = fbdv * fwdvb * cbdv; + + cpu = sys_clk * m / fwdv; + plb = sys_clk * m / (fwdvb * cbdv); + } else { + m = fwdv * fbdv * cbdv; + cpu = sys_clk * m / fwdv; + plb = cpu / cbdv; + } + opb = plb / opdv; + ebc = plb / epdv; + + if (cpc0_cr0 & 0x80) + /* uart0 uses the external clock */ + uart0 = ser_clk; + else + uart0 = cpu / udiv; + + if (cpc0_cr0 & 0x40) + /* uart1 uses the external clock */ + uart1 = ser_clk; + else + uart1 = cpu / udiv; + + /* setup the timebase clock to tick at the cpu frequency */ + cpc0_cr1 = cpc0_cr1 & ~0x00800000; + mtdcr(DCRN_405_CPC0_CR1, cpc0_cr1); + tb = cpu; + + dt_fixup_cpu_clocks(cpu, tb, 0); + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/ebc", ebc); + dt_fixup_clock("/plb/opb/serial@ef600300", uart0); + dt_fixup_clock("/plb/opb/serial@ef600400", uart1); +} + + +void ibm405ep_fixup_clocks(unsigned int sys_clk) +{ + u32 pllmr0 = mfdcr(DCRN_CPC0_PLLMR0); + u32 pllmr1 = mfdcr(DCRN_CPC0_PLLMR1); + u32 cpc0_ucr = mfdcr(DCRN_CPC0_UCR); + u32 cpu, plb, opb, ebc, uart0, uart1; + u32 fwdva, fwdvb, fbdv, cbdv, opdv, epdv; + u32 pllmr0_ccdv, tb, m; + + fwdva = 8 - ((pllmr1 & 0x00070000) >> 16); + fwdvb = 8 - ((pllmr1 & 0x00007000) >> 12); + fbdv = (pllmr1 & 0x00f00000) >> 20; + if (fbdv == 0) + fbdv = 16; + + cbdv = ((pllmr0 & 0x00030000) >> 16) + 1; /* CPU:PLB */ + epdv = ((pllmr0 & 0x00000300) >> 8) + 2; /* PLB:EBC */ + opdv = ((pllmr0 & 0x00003000) >> 12) + 1; /* PLB:OPB */ + + m = fbdv * fwdvb; + + pllmr0_ccdv = ((pllmr0 & 0x00300000) >> 20) + 1; + if (pllmr1 & 0x80000000) + cpu = sys_clk * m / (fwdva * pllmr0_ccdv); + else + cpu = sys_clk / pllmr0_ccdv; + + plb = cpu / cbdv; + opb = plb / opdv; + ebc = plb / epdv; + tb = cpu; + uart0 = cpu / (cpc0_ucr & 0x0000007f); + uart1 = cpu / ((cpc0_ucr & 0x00007f00) >> 8); + + dt_fixup_cpu_clocks(cpu, tb, 0); + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/ebc", ebc); + dt_fixup_clock("/plb/opb/serial@ef600300", uart0); + dt_fixup_clock("/plb/opb/serial@ef600400", uart1); +} + +static u8 ibm405ex_fwdv_multi_bits[] = { + /* values for: 1 - 16 */ + 0x01, 0x02, 0x0e, 0x09, 0x04, 0x0b, 0x10, 0x0d, 0x0c, 0x05, + 0x06, 0x0f, 0x0a, 0x07, 0x08, 0x03 +}; + +u32 ibm405ex_get_fwdva(unsigned long cpr_fwdv) +{ + u32 index; + + for (index = 0; index < ARRAY_SIZE(ibm405ex_fwdv_multi_bits); index++) + if (cpr_fwdv == (u32)ibm405ex_fwdv_multi_bits[index]) + return index + 1; + + return 0; +} + +static u8 ibm405ex_fbdv_multi_bits[] = { + /* values for: 1 - 100 */ + 0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4, + 0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb, + 0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96, + 0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde, + 0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb, + 0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91, + 0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b, + 0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95, + 0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4, + 0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc, + /* values for: 101 - 200 */ + 0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3, + 0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90, + 0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe, + 0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6, + 0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd, + 0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1, + 0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6, + 0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9, + 0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e, + 0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf, + /* values for: 201 - 255 */ + 0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae, + 0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2, + 0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2, + 0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98, + 0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81, + 0x03, 0x87, 0x0f, 0x9f, 0x3f /* END */ +}; + +u32 ibm405ex_get_fbdv(unsigned long cpr_fbdv) +{ + u32 index; + + for (index = 0; index < ARRAY_SIZE(ibm405ex_fbdv_multi_bits); index++) + if (cpr_fbdv == (u32)ibm405ex_fbdv_multi_bits[index]) + return index + 1; + + return 0; +} + +void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk) +{ + /* PLL config */ + u32 pllc = CPR0_READ(DCRN_CPR0_PLLC); + u32 plld = CPR0_READ(DCRN_CPR0_PLLD); + u32 cpud = CPR0_READ(DCRN_CPR0_PRIMAD); + u32 plbd = CPR0_READ(DCRN_CPR0_PRIMBD); + u32 opbd = CPR0_READ(DCRN_CPR0_OPBD); + u32 perd = CPR0_READ(DCRN_CPR0_PERD); + + /* Dividers */ + u32 fbdv = ibm405ex_get_fbdv(__fix_zero((plld >> 24) & 0xff, 1)); + + u32 fwdva = ibm405ex_get_fwdva(__fix_zero((plld >> 16) & 0x0f, 1)); + + u32 cpudv0 = __fix_zero((cpud >> 24) & 7, 8); + + /* PLBDV0 is hardwared to 010. */ + u32 plbdv0 = 2; + u32 plb2xdv0 = __fix_zero((plbd >> 16) & 7, 8); + + u32 opbdv0 = __fix_zero((opbd >> 24) & 3, 4); + + u32 perdv0 = __fix_zero((perd >> 24) & 3, 4); + + /* Resulting clocks */ + u32 cpu, plb, opb, ebc, vco, tb, uart0, uart1; + + /* PLL's VCO is the source for primary forward ? */ + if (pllc & 0x40000000) { + u32 m; + + /* Feedback path */ + switch ((pllc >> 24) & 7) { + case 0: + /* PLLOUTx */ + m = fbdv; + break; + case 1: + /* CPU */ + m = fbdv * fwdva * cpudv0; + break; + case 5: + /* PERClk */ + m = fbdv * fwdva * plb2xdv0 * plbdv0 * opbdv0 * perdv0; + break; + default: + printf("WARNING ! Invalid PLL feedback source !\n"); + goto bypass; + } + + vco = (unsigned int)(sys_clk * m); + } else { +bypass: + /* Bypass system PLL */ + vco = 0; + } + + /* CPU = VCO / ( FWDVA x CPUDV0) */ + cpu = vco / (fwdva * cpudv0); + /* PLB = VCO / ( FWDVA x PLB2XDV0 x PLBDV0) */ + plb = vco / (fwdva * plb2xdv0 * plbdv0); + /* OPB = PLB / OPBDV0 */ + opb = plb / opbdv0; + /* EBC = OPB / PERDV0 */ + ebc = opb / perdv0; + + tb = cpu; + uart0 = uart1 = uart_clk; + + dt_fixup_cpu_clocks(cpu, tb, 0); + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/opb/ebc", ebc); + dt_fixup_clock("/plb/opb/serial@ef600200", uart0); + dt_fixup_clock("/plb/opb/serial@ef600300", uart1); +} |