diff options
Diffstat (limited to 'arch/powerpc/boot/dts/tqm8xx.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/tqm8xx.dts | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/tqm8xx.dts b/arch/powerpc/boot/dts/tqm8xx.dts new file mode 100644 index 0000000000..d16cdfd812 --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8xx.dts @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * TQM8XX Device Tree Source + * + * Heiko Schocher <hs@denx.de> + * 2010 DENX Software Engineering GmbH + */ + +/dts-v1/; + +/ { + model = "TQM8xx"; + compatible = "tqc,tqm8xx"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + mdio1 = &phy1; + serial0 = &smc1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,860@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <16>; // 16 bytes + i-cache-line-size = <16>; // 16 bytes + d-cache-size = <0x1000>; // L1, 4K + i-cache-size = <0x1000>; // L1, 4K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + localbus@fff00100 { + compatible = "fsl,mpc860-localbus", "fsl,pq1-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xfff00100 0x40>; + + ranges = < + 0x0 0x0 0x40000000 0x800000 + 0x3 0x0 0xc0000000 0x200 + >; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <4>; + device-width = <2>; + }; + + /* Note: CAN support needs be enabled in U-Boot */ + can@3,0 { + compatible = "intc,82527"; + reg = <3 0x0 0x80>; + interrupts = <8 1>; + interrupt-parent = <&PIC>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; + bosch,clock-out-frequency = <16000000>; + }; + + can@3,100 { + compatible = "intc,82527"; + reg = <3 0x100 0x80>; + interrupts = <8 1>; + interrupt-parent = <&PIC>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; + }; + }; + + soc@fff00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xfff00000 0x00004000>; + + phy1: mdio@e00 { + compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + PHY: ethernet-phy@f { + reg = <0xf>; + }; + }; + + eth1: ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc866-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY>; + linux,network-index = <1>; + }; + + PIC: pic@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x24>; + compatible = "fsl,mpc860-pic", "fsl,pq1-pic"; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc860-cpm", "fsl,cpm1"; + ranges; + reg = <0x9c0 0x40>; + brg-frequency = <0>; + interrupts = <0 2>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + + muram@2000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x2000>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc860-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + reg = <0x9f0 0x10>; + clock-frequency = <0>; + }; + + CPM_PIC: pic@930 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc860-cpm-pic", + "fsl,cpm1-pic"; + }; + + + smc1: serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc860-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x90>; + }; + + eth0: ethernet@a00 { + device_type = "network"; + compatible = "fsl,mpc860-scc-enet", + "fsl,cpm1-scc-enet"; + reg = <0xa00 0x18 0x3c00 0x100>; + interrupts = <30>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-command = <0000>; + linux,network-index = <0>; + fixed-link = <0 0 10 0 0>; + }; + }; + }; +}; |