diff options
Diffstat (limited to 'arch/powerpc/include/asm/cpm2.h')
-rw-r--r-- | arch/powerpc/include/asm/cpm2.h | 1152 |
1 files changed, 1152 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/cpm2.h b/arch/powerpc/include/asm/cpm2.h new file mode 100644 index 0000000000..249d43cc64 --- /dev/null +++ b/arch/powerpc/include/asm/cpm2.h @@ -0,0 +1,1152 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Communication Processor Module v2. + * + * This file contains structures and information for the communication + * processor channels found in the dual port RAM or parameter RAM. + * All CPM control and status is available through the CPM2 internal + * memory map. See immap_cpm2.h for details. + */ +#ifdef __KERNEL__ +#ifndef __CPM2__ +#define __CPM2__ + +#include <asm/immap_cpm2.h> +#include <asm/cpm.h> +#include <sysdev/fsl_soc.h> + +/* CPM Command register. +*/ +#define CPM_CR_RST ((uint)0x80000000) +#define CPM_CR_PAGE ((uint)0x7c000000) +#define CPM_CR_SBLOCK ((uint)0x03e00000) +#define CPM_CR_FLG ((uint)0x00010000) +#define CPM_CR_MCN ((uint)0x00003fc0) +#define CPM_CR_OPCODE ((uint)0x0000000f) + +/* Device sub-block and page codes. +*/ +#define CPM_CR_SCC1_SBLOCK (0x04) +#define CPM_CR_SCC2_SBLOCK (0x05) +#define CPM_CR_SCC3_SBLOCK (0x06) +#define CPM_CR_SCC4_SBLOCK (0x07) +#define CPM_CR_SMC1_SBLOCK (0x08) +#define CPM_CR_SMC2_SBLOCK (0x09) +#define CPM_CR_SPI_SBLOCK (0x0a) +#define CPM_CR_I2C_SBLOCK (0x0b) +#define CPM_CR_TIMER_SBLOCK (0x0f) +#define CPM_CR_RAND_SBLOCK (0x0e) +#define CPM_CR_FCC1_SBLOCK (0x10) +#define CPM_CR_FCC2_SBLOCK (0x11) +#define CPM_CR_FCC3_SBLOCK (0x12) +#define CPM_CR_IDMA1_SBLOCK (0x14) +#define CPM_CR_IDMA2_SBLOCK (0x15) +#define CPM_CR_IDMA3_SBLOCK (0x16) +#define CPM_CR_IDMA4_SBLOCK (0x17) +#define CPM_CR_MCC1_SBLOCK (0x1c) + +#define CPM_CR_FCC_SBLOCK(x) (x + 0x10) + +#define CPM_CR_SCC1_PAGE (0x00) +#define CPM_CR_SCC2_PAGE (0x01) +#define CPM_CR_SCC3_PAGE (0x02) +#define CPM_CR_SCC4_PAGE (0x03) +#define CPM_CR_SMC1_PAGE (0x07) +#define CPM_CR_SMC2_PAGE (0x08) +#define CPM_CR_SPI_PAGE (0x09) +#define CPM_CR_I2C_PAGE (0x0a) +#define CPM_CR_TIMER_PAGE (0x0a) +#define CPM_CR_RAND_PAGE (0x0a) +#define CPM_CR_FCC1_PAGE (0x04) +#define CPM_CR_FCC2_PAGE (0x05) +#define CPM_CR_FCC3_PAGE (0x06) +#define CPM_CR_IDMA1_PAGE (0x07) +#define CPM_CR_IDMA2_PAGE (0x08) +#define CPM_CR_IDMA3_PAGE (0x09) +#define CPM_CR_IDMA4_PAGE (0x0a) +#define CPM_CR_MCC1_PAGE (0x07) +#define CPM_CR_MCC2_PAGE (0x08) + +#define CPM_CR_FCC_PAGE(x) (x + 0x04) + +/* CPM2-specific opcodes (see cpm.h for common opcodes) +*/ +#define CPM_CR_START_IDMA ((ushort)0x0009) + +#define mk_cr_cmd(PG, SBC, MCN, OP) \ + ((PG << 26) | (SBC << 21) | (MCN << 6) | OP) + +/* The number of pages of host memory we allocate for CPM. This is + * done early in kernel initialization to get physically contiguous + * pages. + */ +#define NUM_CPM_HOST_PAGES 2 + +/* Export the base address of the communication processor registers + * and dual port ram. + */ +extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */ + +#define cpm_dpalloc cpm_muram_alloc +#define cpm_dpfree cpm_muram_free +#define cpm_dpram_addr cpm_muram_addr + +extern void cpm2_reset(void); + +/* Baud rate generators. +*/ +#define CPM_BRG_RST ((uint)0x00020000) +#define CPM_BRG_EN ((uint)0x00010000) +#define CPM_BRG_EXTC_INT ((uint)0x00000000) +#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) +#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) +#define CPM_BRG_ATB ((uint)0x00002000) +#define CPM_BRG_CD_MASK ((uint)0x00001ffe) +#define CPM_BRG_DIV16 ((uint)0x00000001) + +#define CPM2_BRG_INT_CLK (get_brgfreq()) +#define CPM2_BRG_UART_CLK (CPM2_BRG_INT_CLK/16) + +extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src); + +/* This function is used by UARTS, or anything else that uses a 16x + * oversampled clock. + */ +static inline void cpm_setbrg(uint brg, uint rate) +{ + __cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT); +} + +/* This function is used to set high speed synchronous baud rate + * clocks. + */ +static inline void cpm2_fastbrg(uint brg, uint rate, int div16) +{ + __cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT); +} + +/* Parameter RAM offsets from the base. +*/ +#define PROFF_SCC1 ((uint)0x8000) +#define PROFF_SCC2 ((uint)0x8100) +#define PROFF_SCC3 ((uint)0x8200) +#define PROFF_SCC4 ((uint)0x8300) +#define PROFF_FCC1 ((uint)0x8400) +#define PROFF_FCC2 ((uint)0x8500) +#define PROFF_FCC3 ((uint)0x8600) +#define PROFF_MCC1 ((uint)0x8700) +#define PROFF_SMC1_BASE ((uint)0x87fc) +#define PROFF_IDMA1_BASE ((uint)0x87fe) +#define PROFF_MCC2 ((uint)0x8800) +#define PROFF_SMC2_BASE ((uint)0x88fc) +#define PROFF_IDMA2_BASE ((uint)0x88fe) +#define PROFF_SPI_BASE ((uint)0x89fc) +#define PROFF_IDMA3_BASE ((uint)0x89fe) +#define PROFF_TIMERS ((uint)0x8ae0) +#define PROFF_REVNUM ((uint)0x8af0) +#define PROFF_RAND ((uint)0x8af8) +#define PROFF_I2C_BASE ((uint)0x8afc) +#define PROFF_IDMA4_BASE ((uint)0x8afe) + +#define PROFF_SCC_SIZE ((uint)0x100) +#define PROFF_FCC_SIZE ((uint)0x100) +#define PROFF_SMC_SIZE ((uint)64) + +/* The SMCs are relocated to any of the first eight DPRAM pages. + * We will fix these at the first locations of DPRAM, until we + * get some microcode patches :-). + * The parameter ram space for the SMCs is fifty-some bytes, and + * they are required to start on a 64 byte boundary. + */ +#define PROFF_SMC1 (0) +#define PROFF_SMC2 (64) + + +/* Define enough so I can at least use the serial port as a UART. + */ +typedef struct smc_uart { + ushort smc_rbase; /* Rx Buffer descriptor base address */ + ushort smc_tbase; /* Tx Buffer descriptor base address */ + u_char smc_rfcr; /* Rx function code */ + u_char smc_tfcr; /* Tx function code */ + ushort smc_mrblr; /* Max receive buffer length */ + uint smc_rstate; /* Internal */ + uint smc_idp; /* Internal */ + ushort smc_rbptr; /* Internal */ + ushort smc_ibc; /* Internal */ + uint smc_rxtmp; /* Internal */ + uint smc_tstate; /* Internal */ + uint smc_tdp; /* Internal */ + ushort smc_tbptr; /* Internal */ + ushort smc_tbc; /* Internal */ + uint smc_txtmp; /* Internal */ + ushort smc_maxidl; /* Maximum idle characters */ + ushort smc_tmpidl; /* Temporary idle counter */ + ushort smc_brklen; /* Last received break length */ + ushort smc_brkec; /* rcv'd break condition counter */ + ushort smc_brkcr; /* xmt break count register */ + ushort smc_rmask; /* Temporary bit mask */ + uint smc_stmp; /* SDMA Temp */ +} smc_uart_t; + +/* SMC uart mode register (Internal memory map). +*/ +#define SMCMR_REN ((ushort)0x0001) +#define SMCMR_TEN ((ushort)0x0002) +#define SMCMR_DM ((ushort)0x000c) +#define SMCMR_SM_GCI ((ushort)0x0000) +#define SMCMR_SM_UART ((ushort)0x0020) +#define SMCMR_SM_TRANS ((ushort)0x0030) +#define SMCMR_SM_MASK ((ushort)0x0030) +#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ +#define SMCMR_REVD SMCMR_PM_EVEN +#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ +#define SMCMR_BS SMCMR_PEN +#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ +#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ +#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) + +/* SMC Event and Mask register. +*/ +#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ +#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ +#define SMCM_TXE ((unsigned char)0x10) +#define SMCM_BSY ((unsigned char)0x04) +#define SMCM_TX ((unsigned char)0x02) +#define SMCM_RX ((unsigned char)0x01) + +/* SCCs. +*/ +#define SCC_GSMRH_IRP ((uint)0x00040000) +#define SCC_GSMRH_GDE ((uint)0x00010000) +#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) +#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) +#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) +#define SCC_GSMRH_REVD ((uint)0x00002000) +#define SCC_GSMRH_TRX ((uint)0x00001000) +#define SCC_GSMRH_TTX ((uint)0x00000800) +#define SCC_GSMRH_CDP ((uint)0x00000400) +#define SCC_GSMRH_CTSP ((uint)0x00000200) +#define SCC_GSMRH_CDS ((uint)0x00000100) +#define SCC_GSMRH_CTSS ((uint)0x00000080) +#define SCC_GSMRH_TFL ((uint)0x00000040) +#define SCC_GSMRH_RFW ((uint)0x00000020) +#define SCC_GSMRH_TXSY ((uint)0x00000010) +#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) +#define SCC_GSMRH_SYNL8 ((uint)0x00000008) +#define SCC_GSMRH_SYNL4 ((uint)0x00000004) +#define SCC_GSMRH_RTSM ((uint)0x00000002) +#define SCC_GSMRH_RSYN ((uint)0x00000001) + +#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ +#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) +#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) +#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) +#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) +#define SCC_GSMRL_TCI ((uint)0x10000000) +#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) +#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) +#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) +#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) +#define SCC_GSMRL_RINV ((uint)0x02000000) +#define SCC_GSMRL_TINV ((uint)0x01000000) +#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) +#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) +#define SCC_GSMRL_TPL_48 ((uint)0x00800000) +#define SCC_GSMRL_TPL_32 ((uint)0x00600000) +#define SCC_GSMRL_TPL_16 ((uint)0x00400000) +#define SCC_GSMRL_TPL_8 ((uint)0x00200000) +#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) +#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) +#define SCC_GSMRL_TPP_01 ((uint)0x00100000) +#define SCC_GSMRL_TPP_10 ((uint)0x00080000) +#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) +#define SCC_GSMRL_TEND ((uint)0x00040000) +#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) +#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) +#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) +#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) +#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) +#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) +#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) +#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) +#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) +#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) +#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) +#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) +#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) +#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) +#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ +#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) +#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) +#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) +#define SCC_GSMRL_ENR ((uint)0x00000020) +#define SCC_GSMRL_ENT ((uint)0x00000010) +#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) +#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) +#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) +#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) +#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) +#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) +#define SCC_GSMRL_MODE_UART ((uint)0x00000004) +#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) +#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) +#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) + +#define SCC_TODR_TOD ((ushort)0x8000) + +/* SCC Event and Mask register. +*/ +#define SCCM_TXE ((unsigned char)0x10) +#define SCCM_BSY ((unsigned char)0x04) +#define SCCM_TX ((unsigned char)0x02) +#define SCCM_RX ((unsigned char)0x01) + +typedef struct scc_param { + ushort scc_rbase; /* Rx Buffer descriptor base address */ + ushort scc_tbase; /* Tx Buffer descriptor base address */ + u_char scc_rfcr; /* Rx function code */ + u_char scc_tfcr; /* Tx function code */ + ushort scc_mrblr; /* Max receive buffer length */ + uint scc_rstate; /* Internal */ + uint scc_idp; /* Internal */ + ushort scc_rbptr; /* Internal */ + ushort scc_ibc; /* Internal */ + uint scc_rxtmp; /* Internal */ + uint scc_tstate; /* Internal */ + uint scc_tdp; /* Internal */ + ushort scc_tbptr; /* Internal */ + ushort scc_tbc; /* Internal */ + uint scc_txtmp; /* Internal */ + uint scc_rcrc; /* Internal */ + uint scc_tcrc; /* Internal */ +} sccp_t; + +/* Function code bits. +*/ +#define SCC_EB ((u_char) 0x10) /* Set big endian byte order */ +#define SCC_GBL ((u_char) 0x20) /* Snooping enabled */ + +/* CPM Ethernet through SCC1. + */ +typedef struct scc_enet { + sccp_t sen_genscc; + uint sen_cpres; /* Preset CRC */ + uint sen_cmask; /* Constant mask for CRC */ + uint sen_crcec; /* CRC Error counter */ + uint sen_alec; /* alignment error counter */ + uint sen_disfc; /* discard frame counter */ + ushort sen_pads; /* Tx short frame pad character */ + ushort sen_retlim; /* Retry limit threshold */ + ushort sen_retcnt; /* Retry limit counter */ + ushort sen_maxflr; /* maximum frame length register */ + ushort sen_minflr; /* minimum frame length register */ + ushort sen_maxd1; /* maximum DMA1 length */ + ushort sen_maxd2; /* maximum DMA2 length */ + ushort sen_maxd; /* Rx max DMA */ + ushort sen_dmacnt; /* Rx DMA counter */ + ushort sen_maxb; /* Max BD byte count */ + ushort sen_gaddr1; /* Group address filter */ + ushort sen_gaddr2; + ushort sen_gaddr3; + ushort sen_gaddr4; + uint sen_tbuf0data0; /* Save area 0 - current frame */ + uint sen_tbuf0data1; /* Save area 1 - current frame */ + uint sen_tbuf0rba; /* Internal */ + uint sen_tbuf0crc; /* Internal */ + ushort sen_tbuf0bcnt; /* Internal */ + ushort sen_paddrh; /* physical address (MSB) */ + ushort sen_paddrm; + ushort sen_paddrl; /* physical address (LSB) */ + ushort sen_pper; /* persistence */ + ushort sen_rfbdptr; /* Rx first BD pointer */ + ushort sen_tfbdptr; /* Tx first BD pointer */ + ushort sen_tlbdptr; /* Tx last BD pointer */ + uint sen_tbuf1data0; /* Save area 0 - current frame */ + uint sen_tbuf1data1; /* Save area 1 - current frame */ + uint sen_tbuf1rba; /* Internal */ + uint sen_tbuf1crc; /* Internal */ + ushort sen_tbuf1bcnt; /* Internal */ + ushort sen_txlen; /* Tx Frame length counter */ + ushort sen_iaddr1; /* Individual address filter */ + ushort sen_iaddr2; + ushort sen_iaddr3; + ushort sen_iaddr4; + ushort sen_boffcnt; /* Backoff counter */ + + /* NOTE: Some versions of the manual have the following items + * incorrectly documented. Below is the proper order. + */ + ushort sen_taddrh; /* temp address (MSB) */ + ushort sen_taddrm; + ushort sen_taddrl; /* temp address (LSB) */ +} scc_enet_t; + + +/* SCC Event register as used by Ethernet. +*/ +#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ +#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* SCC Mode Register (PSMR) as used by Ethernet. +*/ +#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ +#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ +#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ +#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ +#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ +#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ +#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ +#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ +#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ +#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ +#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ +#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ +#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ + +/* SCC as UART +*/ +typedef struct scc_uart { + sccp_t scc_genscc; + uint scc_res1; /* Reserved */ + uint scc_res2; /* Reserved */ + ushort scc_maxidl; /* Maximum idle chars */ + ushort scc_idlc; /* temp idle counter */ + ushort scc_brkcr; /* Break count register */ + ushort scc_parec; /* receive parity error counter */ + ushort scc_frmec; /* receive framing error counter */ + ushort scc_nosec; /* receive noise counter */ + ushort scc_brkec; /* receive break condition counter */ + ushort scc_brkln; /* last received break length */ + ushort scc_uaddr1; /* UART address character 1 */ + ushort scc_uaddr2; /* UART address character 2 */ + ushort scc_rtemp; /* Temp storage */ + ushort scc_toseq; /* Transmit out of sequence char */ + ushort scc_char1; /* control character 1 */ + ushort scc_char2; /* control character 2 */ + ushort scc_char3; /* control character 3 */ + ushort scc_char4; /* control character 4 */ + ushort scc_char5; /* control character 5 */ + ushort scc_char6; /* control character 6 */ + ushort scc_char7; /* control character 7 */ + ushort scc_char8; /* control character 8 */ + ushort scc_rccm; /* receive control character mask */ + ushort scc_rccr; /* receive control character register */ + ushort scc_rlbc; /* receive last break character */ +} scc_uart_t; + +/* SCC Event and Mask registers when it is used as a UART. +*/ +#define UART_SCCM_GLR ((ushort)0x1000) +#define UART_SCCM_GLT ((ushort)0x0800) +#define UART_SCCM_AB ((ushort)0x0200) +#define UART_SCCM_IDL ((ushort)0x0100) +#define UART_SCCM_GRA ((ushort)0x0080) +#define UART_SCCM_BRKE ((ushort)0x0040) +#define UART_SCCM_BRKS ((ushort)0x0020) +#define UART_SCCM_CCR ((ushort)0x0008) +#define UART_SCCM_BSY ((ushort)0x0004) +#define UART_SCCM_TX ((ushort)0x0002) +#define UART_SCCM_RX ((ushort)0x0001) + +/* The SCC PSMR when used as a UART. +*/ +#define SCU_PSMR_FLC ((ushort)0x8000) +#define SCU_PSMR_SL ((ushort)0x4000) +#define SCU_PSMR_CL ((ushort)0x3000) +#define SCU_PSMR_UM ((ushort)0x0c00) +#define SCU_PSMR_FRZ ((ushort)0x0200) +#define SCU_PSMR_RZS ((ushort)0x0100) +#define SCU_PSMR_SYN ((ushort)0x0080) +#define SCU_PSMR_DRT ((ushort)0x0040) +#define SCU_PSMR_PEN ((ushort)0x0010) +#define SCU_PSMR_RPM ((ushort)0x000c) +#define SCU_PSMR_REVP ((ushort)0x0008) +#define SCU_PSMR_TPM ((ushort)0x0003) +#define SCU_PSMR_TEVP ((ushort)0x0002) + +/* CPM Transparent mode SCC. + */ +typedef struct scc_trans { + sccp_t st_genscc; + uint st_cpres; /* Preset CRC */ + uint st_cmask; /* Constant mask for CRC */ +} scc_trans_t; + +/* How about some FCCs..... +*/ +#define FCC_GFMR_DIAG_NORM ((uint)0x00000000) +#define FCC_GFMR_DIAG_LE ((uint)0x40000000) +#define FCC_GFMR_DIAG_AE ((uint)0x80000000) +#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000) +#define FCC_GFMR_TCI ((uint)0x20000000) +#define FCC_GFMR_TRX ((uint)0x10000000) +#define FCC_GFMR_TTX ((uint)0x08000000) +#define FCC_GFMR_CDP ((uint)0x04000000) +#define FCC_GFMR_CTSP ((uint)0x02000000) +#define FCC_GFMR_CDS ((uint)0x01000000) +#define FCC_GFMR_CTSS ((uint)0x00800000) +#define FCC_GFMR_SYNL_NONE ((uint)0x00000000) +#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000) +#define FCC_GFMR_SYNL_8 ((uint)0x00008000) +#define FCC_GFMR_SYNL_16 ((uint)0x0000c000) +#define FCC_GFMR_RTSM ((uint)0x00002000) +#define FCC_GFMR_RENC_NRZ ((uint)0x00000000) +#define FCC_GFMR_RENC_NRZI ((uint)0x00000800) +#define FCC_GFMR_REVD ((uint)0x00000400) +#define FCC_GFMR_TENC_NRZ ((uint)0x00000000) +#define FCC_GFMR_TENC_NRZI ((uint)0x00000100) +#define FCC_GFMR_TCRC_16 ((uint)0x00000000) +#define FCC_GFMR_TCRC_32 ((uint)0x00000080) +#define FCC_GFMR_ENR ((uint)0x00000020) +#define FCC_GFMR_ENT ((uint)0x00000010) +#define FCC_GFMR_MODE_ENET ((uint)0x0000000c) +#define FCC_GFMR_MODE_ATM ((uint)0x0000000a) +#define FCC_GFMR_MODE_HDLC ((uint)0x00000000) + +/* Generic FCC parameter ram. +*/ +typedef struct fcc_param { + ushort fcc_riptr; /* Rx Internal temp pointer */ + ushort fcc_tiptr; /* Tx Internal temp pointer */ + ushort fcc_res1; + ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */ + uint fcc_rstate; /* Upper byte is Func code, must be set */ + uint fcc_rbase; /* Receive BD base */ + ushort fcc_rbdstat; /* RxBD status */ + ushort fcc_rbdlen; /* RxBD down counter */ + uint fcc_rdptr; /* RxBD internal data pointer */ + uint fcc_tstate; /* Upper byte is Func code, must be set */ + uint fcc_tbase; /* Transmit BD base */ + ushort fcc_tbdstat; /* TxBD status */ + ushort fcc_tbdlen; /* TxBD down counter */ + uint fcc_tdptr; /* TxBD internal data pointer */ + uint fcc_rbptr; /* Rx BD Internal buf pointer */ + uint fcc_tbptr; /* Tx BD Internal buf pointer */ + uint fcc_rcrc; /* Rx temp CRC */ + uint fcc_res2; + uint fcc_tcrc; /* Tx temp CRC */ +} fccp_t; + + +/* Ethernet controller through FCC. +*/ +typedef struct fcc_enet { + fccp_t fen_genfcc; + uint fen_statbuf; /* Internal status buffer */ + uint fen_camptr; /* CAM address */ + uint fen_cmask; /* Constant mask for CRC */ + uint fen_cpres; /* Preset CRC */ + uint fen_crcec; /* CRC Error counter */ + uint fen_alec; /* alignment error counter */ + uint fen_disfc; /* discard frame counter */ + ushort fen_retlim; /* Retry limit */ + ushort fen_retcnt; /* Retry counter */ + ushort fen_pper; /* Persistence */ + ushort fen_boffcnt; /* backoff counter */ + uint fen_gaddrh; /* Group address filter, high 32-bits */ + uint fen_gaddrl; /* Group address filter, low 32-bits */ + ushort fen_tfcstat; /* out of sequence TxBD */ + ushort fen_tfclen; + uint fen_tfcptr; + ushort fen_mflr; /* Maximum frame length (1518) */ + ushort fen_paddrh; /* MAC address */ + ushort fen_paddrm; + ushort fen_paddrl; + ushort fen_ibdcount; /* Internal BD counter */ + ushort fen_ibdstart; /* Internal BD start pointer */ + ushort fen_ibdend; /* Internal BD end pointer */ + ushort fen_txlen; /* Internal Tx frame length counter */ + uint fen_ibdbase[8]; /* Internal use */ + uint fen_iaddrh; /* Individual address filter */ + uint fen_iaddrl; + ushort fen_minflr; /* Minimum frame length (64) */ + ushort fen_taddrh; /* Filter transfer MAC address */ + ushort fen_taddrm; + ushort fen_taddrl; + ushort fen_padptr; /* Pointer to pad byte buffer */ + ushort fen_cftype; /* control frame type */ + ushort fen_cfrange; /* control frame range */ + ushort fen_maxb; /* maximum BD count */ + ushort fen_maxd1; /* Max DMA1 length (1520) */ + ushort fen_maxd2; /* Max DMA2 length (1520) */ + ushort fen_maxd; /* internal max DMA count */ + ushort fen_dmacnt; /* internal DMA counter */ + uint fen_octc; /* Total octect counter */ + uint fen_colc; /* Total collision counter */ + uint fen_broc; /* Total broadcast packet counter */ + uint fen_mulc; /* Total multicast packet count */ + uint fen_uspc; /* Total packets < 64 bytes */ + uint fen_frgc; /* Total packets < 64 bytes with errors */ + uint fen_ospc; /* Total packets > 1518 */ + uint fen_jbrc; /* Total packets > 1518 with errors */ + uint fen_p64c; /* Total packets == 64 bytes */ + uint fen_p65c; /* Total packets 64 < bytes <= 127 */ + uint fen_p128c; /* Total packets 127 < bytes <= 255 */ + uint fen_p256c; /* Total packets 256 < bytes <= 511 */ + uint fen_p512c; /* Total packets 512 < bytes <= 1023 */ + uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */ + uint fen_cambuf; /* Internal CAM buffer pointer */ + ushort fen_rfthr; /* Received frames threshold */ + ushort fen_rfcnt; /* Received frames count */ +} fcc_enet_t; + +/* FCC Event/Mask register as used by Ethernet. +*/ +#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */ +#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */ +#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */ +#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* FCC Mode Register (FPSMR) as used by Ethernet. +*/ +#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */ +#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */ +#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */ +#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */ +#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */ +#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */ +#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */ +#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */ +#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */ +#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */ +#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */ +#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */ +#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */ + +/* IIC parameter RAM. +*/ +typedef struct iic { + ushort iic_rbase; /* Rx Buffer descriptor base address */ + ushort iic_tbase; /* Tx Buffer descriptor base address */ + u_char iic_rfcr; /* Rx function code */ + u_char iic_tfcr; /* Tx function code */ + ushort iic_mrblr; /* Max receive buffer length */ + uint iic_rstate; /* Internal */ + uint iic_rdp; /* Internal */ + ushort iic_rbptr; /* Internal */ + ushort iic_rbc; /* Internal */ + uint iic_rxtmp; /* Internal */ + uint iic_tstate; /* Internal */ + uint iic_tdp; /* Internal */ + ushort iic_tbptr; /* Internal */ + ushort iic_tbc; /* Internal */ + uint iic_txtmp; /* Internal */ +} iic_t; + +/* IDMA parameter RAM +*/ +typedef struct idma { + ushort ibase; /* IDMA buffer descriptor table base address */ + ushort dcm; /* DMA channel mode */ + ushort ibdptr; /* IDMA current buffer descriptor pointer */ + ushort dpr_buf; /* IDMA transfer buffer base address */ + ushort buf_inv; /* internal buffer inventory */ + ushort ss_max; /* steady-state maximum transfer size */ + ushort dpr_in_ptr; /* write pointer inside the internal buffer */ + ushort sts; /* source transfer size */ + ushort dpr_out_ptr; /* read pointer inside the internal buffer */ + ushort seob; /* source end of burst */ + ushort deob; /* destination end of burst */ + ushort dts; /* destination transfer size */ + ushort ret_add; /* return address when working in ERM=1 mode */ + ushort res0; /* reserved */ + uint bd_cnt; /* internal byte count */ + uint s_ptr; /* source internal data pointer */ + uint d_ptr; /* destination internal data pointer */ + uint istate; /* internal state */ + u_char res1[20]; /* pad to 64-byte length */ +} idma_t; + +/* DMA channel mode bit fields +*/ +#define IDMA_DCM_FB ((ushort)0x8000) /* fly-by mode */ +#define IDMA_DCM_LP ((ushort)0x4000) /* low priority */ +#define IDMA_DCM_TC2 ((ushort)0x0400) /* value driven on TC[2] */ +#define IDMA_DCM_DMA_WRAP_MASK ((ushort)0x01c0) /* mask for DMA wrap */ +#define IDMA_DCM_DMA_WRAP_64 ((ushort)0x0000) /* 64-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_128 ((ushort)0x0040) /* 128-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_256 ((ushort)0x0080) /* 256-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_512 ((ushort)0x00c0) /* 512-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_1024 ((ushort)0x0100) /* 1024-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_2048 ((ushort)0x0140) /* 2048-byte DMA xfer buffer */ +#define IDMA_DCM_SINC ((ushort)0x0020) /* source inc addr */ +#define IDMA_DCM_DINC ((ushort)0x0010) /* destination inc addr */ +#define IDMA_DCM_ERM ((ushort)0x0008) /* external request mode */ +#define IDMA_DCM_DT ((ushort)0x0004) /* DONE treatment */ +#define IDMA_DCM_SD_MASK ((ushort)0x0003) /* mask for SD bit field */ +#define IDMA_DCM_SD_MEM2MEM ((ushort)0x0000) /* memory-to-memory xfer */ +#define IDMA_DCM_SD_PER2MEM ((ushort)0x0002) /* peripheral-to-memory xfer */ +#define IDMA_DCM_SD_MEM2PER ((ushort)0x0001) /* memory-to-peripheral xfer */ + +/* IDMA Buffer Descriptors +*/ +typedef struct idma_bd { + uint flags; + uint len; /* data length */ + uint src; /* source data buffer pointer */ + uint dst; /* destination data buffer pointer */ +} idma_bd_t; + +/* IDMA buffer descriptor flag bit fields +*/ +#define IDMA_BD_V ((uint)0x80000000) /* valid */ +#define IDMA_BD_W ((uint)0x20000000) /* wrap */ +#define IDMA_BD_I ((uint)0x10000000) /* interrupt */ +#define IDMA_BD_L ((uint)0x08000000) /* last */ +#define IDMA_BD_CM ((uint)0x02000000) /* continuous mode */ +#define IDMA_BD_SDN ((uint)0x00400000) /* source done */ +#define IDMA_BD_DDN ((uint)0x00200000) /* destination done */ +#define IDMA_BD_DGBL ((uint)0x00100000) /* destination global */ +#define IDMA_BD_DBO_LE ((uint)0x00040000) /* little-end dest byte order */ +#define IDMA_BD_DBO_BE ((uint)0x00080000) /* big-end dest byte order */ +#define IDMA_BD_DDTB ((uint)0x00010000) /* destination data bus */ +#define IDMA_BD_SGBL ((uint)0x00002000) /* source global */ +#define IDMA_BD_SBO_LE ((uint)0x00000800) /* little-end src byte order */ +#define IDMA_BD_SBO_BE ((uint)0x00001000) /* big-end src byte order */ +#define IDMA_BD_SDTB ((uint)0x00000200) /* source data bus */ + +/* per-channel IDMA registers +*/ +typedef struct im_idma { + u_char idsr; /* IDMAn event status register */ + u_char res0[3]; + u_char idmr; /* IDMAn event mask register */ + u_char res1[3]; +} im_idma_t; + +/* IDMA event register bit fields +*/ +#define IDMA_EVENT_SC ((unsigned char)0x08) /* stop completed */ +#define IDMA_EVENT_OB ((unsigned char)0x04) /* out of buffers */ +#define IDMA_EVENT_EDN ((unsigned char)0x02) /* external DONE asserted */ +#define IDMA_EVENT_BC ((unsigned char)0x01) /* buffer descriptor complete */ + +/* RISC Controller Configuration Register (RCCR) bit fields +*/ +#define RCCR_TIME ((uint)0x80000000) /* timer enable */ +#define RCCR_TIMEP_MASK ((uint)0x3f000000) /* mask for timer period bit field */ +#define RCCR_DR0M ((uint)0x00800000) /* IDMA0 request mode */ +#define RCCR_DR1M ((uint)0x00400000) /* IDMA1 request mode */ +#define RCCR_DR2M ((uint)0x00000080) /* IDMA2 request mode */ +#define RCCR_DR3M ((uint)0x00000040) /* IDMA3 request mode */ +#define RCCR_DR0QP_MASK ((uint)0x00300000) /* mask for IDMA0 req priority */ +#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */ +#define RCCR_DR0QP_MED ((uint)0x00100000) /* IDMA0 has medium req priority */ +#define RCCR_DR0QP_LOW ((uint)0x00200000) /* IDMA0 has low req priority */ +#define RCCR_DR1QP_MASK ((uint)0x00030000) /* mask for IDMA1 req priority */ +#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */ +#define RCCR_DR1QP_MED ((uint)0x00010000) /* IDMA1 has medium req priority */ +#define RCCR_DR1QP_LOW ((uint)0x00020000) /* IDMA1 has low req priority */ +#define RCCR_DR2QP_MASK ((uint)0x00000030) /* mask for IDMA2 req priority */ +#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */ +#define RCCR_DR2QP_MED ((uint)0x00000010) /* IDMA2 has medium req priority */ +#define RCCR_DR2QP_LOW ((uint)0x00000020) /* IDMA2 has low req priority */ +#define RCCR_DR3QP_MASK ((uint)0x00000003) /* mask for IDMA3 req priority */ +#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */ +#define RCCR_DR3QP_MED ((uint)0x00000001) /* IDMA3 has medium req priority */ +#define RCCR_DR3QP_LOW ((uint)0x00000002) /* IDMA3 has low req priority */ +#define RCCR_EIE ((uint)0x00080000) /* external interrupt enable */ +#define RCCR_SCD ((uint)0x00040000) /* scheduler configuration */ +#define RCCR_ERAM_MASK ((uint)0x0000e000) /* mask for enable RAM microcode */ +#define RCCR_ERAM_0KB ((uint)0x00000000) /* use 0KB of dpram for microcode */ +#define RCCR_ERAM_2KB ((uint)0x00002000) /* use 2KB of dpram for microcode */ +#define RCCR_ERAM_4KB ((uint)0x00004000) /* use 4KB of dpram for microcode */ +#define RCCR_ERAM_6KB ((uint)0x00006000) /* use 6KB of dpram for microcode */ +#define RCCR_ERAM_8KB ((uint)0x00008000) /* use 8KB of dpram for microcode */ +#define RCCR_ERAM_10KB ((uint)0x0000a000) /* use 10KB of dpram for microcode */ +#define RCCR_ERAM_12KB ((uint)0x0000c000) /* use 12KB of dpram for microcode */ +#define RCCR_EDM0 ((uint)0x00000800) /* DREQ0 edge detect mode */ +#define RCCR_EDM1 ((uint)0x00000400) /* DREQ1 edge detect mode */ +#define RCCR_EDM2 ((uint)0x00000200) /* DREQ2 edge detect mode */ +#define RCCR_EDM3 ((uint)0x00000100) /* DREQ3 edge detect mode */ +#define RCCR_DEM01 ((uint)0x00000008) /* DONE0/DONE1 edge detect mode */ +#define RCCR_DEM23 ((uint)0x00000004) /* DONE2/DONE3 edge detect mode */ + +/*----------------------------------------------------------------------- + * CMXFCR - CMX FCC Clock Route Register + */ +#define CMXFCR_FC1 0x40000000 /* FCC1 connection */ +#define CMXFCR_RF1CS_MSK 0x38000000 /* Receive FCC1 Clock Source Mask */ +#define CMXFCR_TF1CS_MSK 0x07000000 /* Transmit FCC1 Clock Source Mask */ +#define CMXFCR_FC2 0x00400000 /* FCC2 connection */ +#define CMXFCR_RF2CS_MSK 0x00380000 /* Receive FCC2 Clock Source Mask */ +#define CMXFCR_TF2CS_MSK 0x00070000 /* Transmit FCC2 Clock Source Mask */ +#define CMXFCR_FC3 0x00004000 /* FCC3 connection */ +#define CMXFCR_RF3CS_MSK 0x00003800 /* Receive FCC3 Clock Source Mask */ +#define CMXFCR_TF3CS_MSK 0x00000700 /* Transmit FCC3 Clock Source Mask */ + +#define CMXFCR_RF1CS_BRG5 0x00000000 /* Receive FCC1 Clock Source is BRG5 */ +#define CMXFCR_RF1CS_BRG6 0x08000000 /* Receive FCC1 Clock Source is BRG6 */ +#define CMXFCR_RF1CS_BRG7 0x10000000 /* Receive FCC1 Clock Source is BRG7 */ +#define CMXFCR_RF1CS_BRG8 0x18000000 /* Receive FCC1 Clock Source is BRG8 */ +#define CMXFCR_RF1CS_CLK9 0x20000000 /* Receive FCC1 Clock Source is CLK9 */ +#define CMXFCR_RF1CS_CLK10 0x28000000 /* Receive FCC1 Clock Source is CLK10 */ +#define CMXFCR_RF1CS_CLK11 0x30000000 /* Receive FCC1 Clock Source is CLK11 */ +#define CMXFCR_RF1CS_CLK12 0x38000000 /* Receive FCC1 Clock Source is CLK12 */ + +#define CMXFCR_TF1CS_BRG5 0x00000000 /* Transmit FCC1 Clock Source is BRG5 */ +#define CMXFCR_TF1CS_BRG6 0x01000000 /* Transmit FCC1 Clock Source is BRG6 */ +#define CMXFCR_TF1CS_BRG7 0x02000000 /* Transmit FCC1 Clock Source is BRG7 */ +#define CMXFCR_TF1CS_BRG8 0x03000000 /* Transmit FCC1 Clock Source is BRG8 */ +#define CMXFCR_TF1CS_CLK9 0x04000000 /* Transmit FCC1 Clock Source is CLK9 */ +#define CMXFCR_TF1CS_CLK10 0x05000000 /* Transmit FCC1 Clock Source is CLK10 */ +#define CMXFCR_TF1CS_CLK11 0x06000000 /* Transmit FCC1 Clock Source is CLK11 */ +#define CMXFCR_TF1CS_CLK12 0x07000000 /* Transmit FCC1 Clock Source is CLK12 */ + +#define CMXFCR_RF2CS_BRG5 0x00000000 /* Receive FCC2 Clock Source is BRG5 */ +#define CMXFCR_RF2CS_BRG6 0x00080000 /* Receive FCC2 Clock Source is BRG6 */ +#define CMXFCR_RF2CS_BRG7 0x00100000 /* Receive FCC2 Clock Source is BRG7 */ +#define CMXFCR_RF2CS_BRG8 0x00180000 /* Receive FCC2 Clock Source is BRG8 */ +#define CMXFCR_RF2CS_CLK13 0x00200000 /* Receive FCC2 Clock Source is CLK13 */ +#define CMXFCR_RF2CS_CLK14 0x00280000 /* Receive FCC2 Clock Source is CLK14 */ +#define CMXFCR_RF2CS_CLK15 0x00300000 /* Receive FCC2 Clock Source is CLK15 */ +#define CMXFCR_RF2CS_CLK16 0x00380000 /* Receive FCC2 Clock Source is CLK16 */ + +#define CMXFCR_TF2CS_BRG5 0x00000000 /* Transmit FCC2 Clock Source is BRG5 */ +#define CMXFCR_TF2CS_BRG6 0x00010000 /* Transmit FCC2 Clock Source is BRG6 */ +#define CMXFCR_TF2CS_BRG7 0x00020000 /* Transmit FCC2 Clock Source is BRG7 */ +#define CMXFCR_TF2CS_BRG8 0x00030000 /* Transmit FCC2 Clock Source is BRG8 */ +#define CMXFCR_TF2CS_CLK13 0x00040000 /* Transmit FCC2 Clock Source is CLK13 */ +#define CMXFCR_TF2CS_CLK14 0x00050000 /* Transmit FCC2 Clock Source is CLK14 */ +#define CMXFCR_TF2CS_CLK15 0x00060000 /* Transmit FCC2 Clock Source is CLK15 */ +#define CMXFCR_TF2CS_CLK16 0x00070000 /* Transmit FCC2 Clock Source is CLK16 */ + +#define CMXFCR_RF3CS_BRG5 0x00000000 /* Receive FCC3 Clock Source is BRG5 */ +#define CMXFCR_RF3CS_BRG6 0x00000800 /* Receive FCC3 Clock Source is BRG6 */ +#define CMXFCR_RF3CS_BRG7 0x00001000 /* Receive FCC3 Clock Source is BRG7 */ +#define CMXFCR_RF3CS_BRG8 0x00001800 /* Receive FCC3 Clock Source is BRG8 */ +#define CMXFCR_RF3CS_CLK13 0x00002000 /* Receive FCC3 Clock Source is CLK13 */ +#define CMXFCR_RF3CS_CLK14 0x00002800 /* Receive FCC3 Clock Source is CLK14 */ +#define CMXFCR_RF3CS_CLK15 0x00003000 /* Receive FCC3 Clock Source is CLK15 */ +#define CMXFCR_RF3CS_CLK16 0x00003800 /* Receive FCC3 Clock Source is CLK16 */ + +#define CMXFCR_TF3CS_BRG5 0x00000000 /* Transmit FCC3 Clock Source is BRG5 */ +#define CMXFCR_TF3CS_BRG6 0x00000100 /* Transmit FCC3 Clock Source is BRG6 */ +#define CMXFCR_TF3CS_BRG7 0x00000200 /* Transmit FCC3 Clock Source is BRG7 */ +#define CMXFCR_TF3CS_BRG8 0x00000300 /* Transmit FCC3 Clock Source is BRG8 */ +#define CMXFCR_TF3CS_CLK13 0x00000400 /* Transmit FCC3 Clock Source is CLK13 */ +#define CMXFCR_TF3CS_CLK14 0x00000500 /* Transmit FCC3 Clock Source is CLK14 */ +#define CMXFCR_TF3CS_CLK15 0x00000600 /* Transmit FCC3 Clock Source is CLK15 */ +#define CMXFCR_TF3CS_CLK16 0x00000700 /* Transmit FCC3 Clock Source is CLK16 */ + +/*----------------------------------------------------------------------- + * CMXSCR - CMX SCC Clock Route Register + */ +#define CMXSCR_GR1 0x80000000 /* Grant Support of SCC1 */ +#define CMXSCR_SC1 0x40000000 /* SCC1 connection */ +#define CMXSCR_RS1CS_MSK 0x38000000 /* Receive SCC1 Clock Source Mask */ +#define CMXSCR_TS1CS_MSK 0x07000000 /* Transmit SCC1 Clock Source Mask */ +#define CMXSCR_GR2 0x00800000 /* Grant Support of SCC2 */ +#define CMXSCR_SC2 0x00400000 /* SCC2 connection */ +#define CMXSCR_RS2CS_MSK 0x00380000 /* Receive SCC2 Clock Source Mask */ +#define CMXSCR_TS2CS_MSK 0x00070000 /* Transmit SCC2 Clock Source Mask */ +#define CMXSCR_GR3 0x00008000 /* Grant Support of SCC3 */ +#define CMXSCR_SC3 0x00004000 /* SCC3 connection */ +#define CMXSCR_RS3CS_MSK 0x00003800 /* Receive SCC3 Clock Source Mask */ +#define CMXSCR_TS3CS_MSK 0x00000700 /* Transmit SCC3 Clock Source Mask */ +#define CMXSCR_GR4 0x00000080 /* Grant Support of SCC4 */ +#define CMXSCR_SC4 0x00000040 /* SCC4 connection */ +#define CMXSCR_RS4CS_MSK 0x00000038 /* Receive SCC4 Clock Source Mask */ +#define CMXSCR_TS4CS_MSK 0x00000007 /* Transmit SCC4 Clock Source Mask */ + +#define CMXSCR_RS1CS_BRG1 0x00000000 /* SCC1 Rx Clock Source is BRG1 */ +#define CMXSCR_RS1CS_BRG2 0x08000000 /* SCC1 Rx Clock Source is BRG2 */ +#define CMXSCR_RS1CS_BRG3 0x10000000 /* SCC1 Rx Clock Source is BRG3 */ +#define CMXSCR_RS1CS_BRG4 0x18000000 /* SCC1 Rx Clock Source is BRG4 */ +#define CMXSCR_RS1CS_CLK11 0x20000000 /* SCC1 Rx Clock Source is CLK11 */ +#define CMXSCR_RS1CS_CLK12 0x28000000 /* SCC1 Rx Clock Source is CLK12 */ +#define CMXSCR_RS1CS_CLK3 0x30000000 /* SCC1 Rx Clock Source is CLK3 */ +#define CMXSCR_RS1CS_CLK4 0x38000000 /* SCC1 Rx Clock Source is CLK4 */ + +#define CMXSCR_TS1CS_BRG1 0x00000000 /* SCC1 Tx Clock Source is BRG1 */ +#define CMXSCR_TS1CS_BRG2 0x01000000 /* SCC1 Tx Clock Source is BRG2 */ +#define CMXSCR_TS1CS_BRG3 0x02000000 /* SCC1 Tx Clock Source is BRG3 */ +#define CMXSCR_TS1CS_BRG4 0x03000000 /* SCC1 Tx Clock Source is BRG4 */ +#define CMXSCR_TS1CS_CLK11 0x04000000 /* SCC1 Tx Clock Source is CLK11 */ +#define CMXSCR_TS1CS_CLK12 0x05000000 /* SCC1 Tx Clock Source is CLK12 */ +#define CMXSCR_TS1CS_CLK3 0x06000000 /* SCC1 Tx Clock Source is CLK3 */ +#define CMXSCR_TS1CS_CLK4 0x07000000 /* SCC1 Tx Clock Source is CLK4 */ + +#define CMXSCR_RS2CS_BRG1 0x00000000 /* SCC2 Rx Clock Source is BRG1 */ +#define CMXSCR_RS2CS_BRG2 0x00080000 /* SCC2 Rx Clock Source is BRG2 */ +#define CMXSCR_RS2CS_BRG3 0x00100000 /* SCC2 Rx Clock Source is BRG3 */ +#define CMXSCR_RS2CS_BRG4 0x00180000 /* SCC2 Rx Clock Source is BRG4 */ +#define CMXSCR_RS2CS_CLK11 0x00200000 /* SCC2 Rx Clock Source is CLK11 */ +#define CMXSCR_RS2CS_CLK12 0x00280000 /* SCC2 Rx Clock Source is CLK12 */ +#define CMXSCR_RS2CS_CLK3 0x00300000 /* SCC2 Rx Clock Source is CLK3 */ +#define CMXSCR_RS2CS_CLK4 0x00380000 /* SCC2 Rx Clock Source is CLK4 */ + +#define CMXSCR_TS2CS_BRG1 0x00000000 /* SCC2 Tx Clock Source is BRG1 */ +#define CMXSCR_TS2CS_BRG2 0x00010000 /* SCC2 Tx Clock Source is BRG2 */ +#define CMXSCR_TS2CS_BRG3 0x00020000 /* SCC2 Tx Clock Source is BRG3 */ +#define CMXSCR_TS2CS_BRG4 0x00030000 /* SCC2 Tx Clock Source is BRG4 */ +#define CMXSCR_TS2CS_CLK11 0x00040000 /* SCC2 Tx Clock Source is CLK11 */ +#define CMXSCR_TS2CS_CLK12 0x00050000 /* SCC2 Tx Clock Source is CLK12 */ +#define CMXSCR_TS2CS_CLK3 0x00060000 /* SCC2 Tx Clock Source is CLK3 */ +#define CMXSCR_TS2CS_CLK4 0x00070000 /* SCC2 Tx Clock Source is CLK4 */ + +#define CMXSCR_RS3CS_BRG1 0x00000000 /* SCC3 Rx Clock Source is BRG1 */ +#define CMXSCR_RS3CS_BRG2 0x00000800 /* SCC3 Rx Clock Source is BRG2 */ +#define CMXSCR_RS3CS_BRG3 0x00001000 /* SCC3 Rx Clock Source is BRG3 */ +#define CMXSCR_RS3CS_BRG4 0x00001800 /* SCC3 Rx Clock Source is BRG4 */ +#define CMXSCR_RS3CS_CLK5 0x00002000 /* SCC3 Rx Clock Source is CLK5 */ +#define CMXSCR_RS3CS_CLK6 0x00002800 /* SCC3 Rx Clock Source is CLK6 */ +#define CMXSCR_RS3CS_CLK7 0x00003000 /* SCC3 Rx Clock Source is CLK7 */ +#define CMXSCR_RS3CS_CLK8 0x00003800 /* SCC3 Rx Clock Source is CLK8 */ + +#define CMXSCR_TS3CS_BRG1 0x00000000 /* SCC3 Tx Clock Source is BRG1 */ +#define CMXSCR_TS3CS_BRG2 0x00000100 /* SCC3 Tx Clock Source is BRG2 */ +#define CMXSCR_TS3CS_BRG3 0x00000200 /* SCC3 Tx Clock Source is BRG3 */ +#define CMXSCR_TS3CS_BRG4 0x00000300 /* SCC3 Tx Clock Source is BRG4 */ +#define CMXSCR_TS3CS_CLK5 0x00000400 /* SCC3 Tx Clock Source is CLK5 */ +#define CMXSCR_TS3CS_CLK6 0x00000500 /* SCC3 Tx Clock Source is CLK6 */ +#define CMXSCR_TS3CS_CLK7 0x00000600 /* SCC3 Tx Clock Source is CLK7 */ +#define CMXSCR_TS3CS_CLK8 0x00000700 /* SCC3 Tx Clock Source is CLK8 */ + +#define CMXSCR_RS4CS_BRG1 0x00000000 /* SCC4 Rx Clock Source is BRG1 */ +#define CMXSCR_RS4CS_BRG2 0x00000008 /* SCC4 Rx Clock Source is BRG2 */ +#define CMXSCR_RS4CS_BRG3 0x00000010 /* SCC4 Rx Clock Source is BRG3 */ +#define CMXSCR_RS4CS_BRG4 0x00000018 /* SCC4 Rx Clock Source is BRG4 */ +#define CMXSCR_RS4CS_CLK5 0x00000020 /* SCC4 Rx Clock Source is CLK5 */ +#define CMXSCR_RS4CS_CLK6 0x00000028 /* SCC4 Rx Clock Source is CLK6 */ +#define CMXSCR_RS4CS_CLK7 0x00000030 /* SCC4 Rx Clock Source is CLK7 */ +#define CMXSCR_RS4CS_CLK8 0x00000038 /* SCC4 Rx Clock Source is CLK8 */ + +#define CMXSCR_TS4CS_BRG1 0x00000000 /* SCC4 Tx Clock Source is BRG1 */ +#define CMXSCR_TS4CS_BRG2 0x00000001 /* SCC4 Tx Clock Source is BRG2 */ +#define CMXSCR_TS4CS_BRG3 0x00000002 /* SCC4 Tx Clock Source is BRG3 */ +#define CMXSCR_TS4CS_BRG4 0x00000003 /* SCC4 Tx Clock Source is BRG4 */ +#define CMXSCR_TS4CS_CLK5 0x00000004 /* SCC4 Tx Clock Source is CLK5 */ +#define CMXSCR_TS4CS_CLK6 0x00000005 /* SCC4 Tx Clock Source is CLK6 */ +#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */ +#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */ + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration Register 4-31 + */ +#define SIUMCR_BBD 0x80000000 /* Bus Busy Disable */ +#define SIUMCR_ESE 0x40000000 /* External Snoop Enable */ +#define SIUMCR_PBSE 0x20000000 /* Parity Byte Select Enable */ +#define SIUMCR_CDIS 0x10000000 /* Core Disable */ +#define SIUMCR_DPPC00 0x00000000 /* Data Parity Pins Configuration*/ +#define SIUMCR_DPPC01 0x04000000 /* - " - */ +#define SIUMCR_DPPC10 0x08000000 /* - " - */ +#define SIUMCR_DPPC11 0x0c000000 /* - " - */ +#define SIUMCR_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */ +#define SIUMCR_L2CPC01 0x01000000 /* - " - */ +#define SIUMCR_L2CPC10 0x02000000 /* - " - */ +#define SIUMCR_L2CPC11 0x03000000 /* - " - */ +#define SIUMCR_LBPC00 0x00000000 /* Local Bus Pins Configuration */ +#define SIUMCR_LBPC01 0x00400000 /* - " - */ +#define SIUMCR_LBPC10 0x00800000 /* - " - */ +#define SIUMCR_LBPC11 0x00c00000 /* - " - */ +#define SIUMCR_APPC00 0x00000000 /* Address Parity Pins Configuration*/ +#define SIUMCR_APPC01 0x00100000 /* - " - */ +#define SIUMCR_APPC10 0x00200000 /* - " - */ +#define SIUMCR_APPC11 0x00300000 /* - " - */ +#define SIUMCR_CS10PC00 0x00000000 /* CS10 Pin Configuration */ +#define SIUMCR_CS10PC01 0x00040000 /* - " - */ +#define SIUMCR_CS10PC10 0x00080000 /* - " - */ +#define SIUMCR_CS10PC11 0x000c0000 /* - " - */ +#define SIUMCR_BCTLC00 0x00000000 /* Buffer Control Configuration */ +#define SIUMCR_BCTLC01 0x00010000 /* - " - */ +#define SIUMCR_BCTLC10 0x00020000 /* - " - */ +#define SIUMCR_BCTLC11 0x00030000 /* - " - */ +#define SIUMCR_MMR00 0x00000000 /* Mask Masters Requests */ +#define SIUMCR_MMR01 0x00004000 /* - " - */ +#define SIUMCR_MMR10 0x00008000 /* - " - */ +#define SIUMCR_MMR11 0x0000c000 /* - " - */ +#define SIUMCR_LPBSE 0x00002000 /* LocalBus Parity Byte Select Enable*/ + +/*----------------------------------------------------------------------- + * SCCR - System Clock Control Register 9-8 +*/ +#define SCCR_PCI_MODE 0x00000100 /* PCI Mode */ +#define SCCR_PCI_MODCK 0x00000080 /* Value of PCI_MODCK pin */ +#define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */ +#define SCCR_PCIDF_SHIFT 3 + +#ifndef CPM_IMMR_OFFSET +#define CPM_IMMR_OFFSET 0x101a8 +#endif + +#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */ + +/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK + * in order to use clock-computing stuff below for the FCC x + */ + +/* Automatically generates register configurations */ +#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */ + +#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */ +#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */ +#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */ +#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */ +#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */ +#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */ + +#define PC_F1RXCLK PC_CLK(F1_RXCLK) +#define PC_F1TXCLK PC_CLK(F1_TXCLK) +#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK)) +#define CMX1_CLK_MASK ((uint)0xff000000) + +#define PC_F2RXCLK PC_CLK(F2_RXCLK) +#define PC_F2TXCLK PC_CLK(F2_TXCLK) +#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK)) +#define CMX2_CLK_MASK ((uint)0x00ff0000) + +#define PC_F3RXCLK PC_CLK(F3_RXCLK) +#define PC_F3TXCLK PC_CLK(F3_TXCLK) +#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK)) +#define CMX3_CLK_MASK ((uint)0x0000ff00) + +#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK) +#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE) + +#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK) + +/* I/O Pin assignment for FCC1. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PA1_COL 0x00000001U +#define PA1_CRS 0x00000002U +#define PA1_TXER 0x00000004U +#define PA1_TXEN 0x00000008U +#define PA1_RXDV 0x00000010U +#define PA1_RXER 0x00000020U +#define PA1_TXDAT 0x00003c00U +#define PA1_RXDAT 0x0003c000U +#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT) +#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \ + PA1_RXDV | PA1_RXER) +#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV) +#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER) + + +/* I/O Pin assignment for FCC2. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB2_TXER 0x00000001U +#define PB2_RXDV 0x00000002U +#define PB2_TXEN 0x00000004U +#define PB2_RXER 0x00000008U +#define PB2_COL 0x00000010U +#define PB2_CRS 0x00000020U +#define PB2_TXDAT 0x000003c0U +#define PB2_RXDAT 0x00003c00U +#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \ + PB2_RXER | PB2_RXDV | PB2_TXER) +#define PB2_PSORB1 (PB2_TXEN) +#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV) +#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER) + + +/* I/O Pin assignment for FCC3. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB3_RXDV 0x00004000U +#define PB3_RXER 0x00008000U +#define PB3_TXER 0x00010000U +#define PB3_TXEN 0x00020000U +#define PB3_COL 0x00040000U +#define PB3_CRS 0x00080000U +#define PB3_TXDAT 0x0f000000U +#define PC3_TXDAT 0x00000010U +#define PB3_RXDAT 0x00f00000U +#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \ + PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN) +#define PB3_PSORB1 0 +#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV) +#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER) +#define PC3_DIRC1 (PC3_TXDAT) + +/* Handy macro to specify mem for FCCs*/ +#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) +#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) +#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) +#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2) + +/* Pipeline Maximum Depth */ +#define MPC82XX_BCR_PLDP 0x00800000 + +/* Clocks and GRG's */ + +enum cpm_clk_dir { + CPM_CLK_RX, + CPM_CLK_TX, + CPM_CLK_RTX +}; + +enum cpm_clk_target { + CPM_CLK_SCC1, + CPM_CLK_SCC2, + CPM_CLK_SCC3, + CPM_CLK_SCC4, + CPM_CLK_FCC1, + CPM_CLK_FCC2, + CPM_CLK_FCC3, + CPM_CLK_SMC1, + CPM_CLK_SMC2, +}; + +enum cpm_clk { + CPM_CLK_NONE = 0, + CPM_BRG1, /* Baud Rate Generator 1 */ + CPM_BRG2, /* Baud Rate Generator 2 */ + CPM_BRG3, /* Baud Rate Generator 3 */ + CPM_BRG4, /* Baud Rate Generator 4 */ + CPM_BRG5, /* Baud Rate Generator 5 */ + CPM_BRG6, /* Baud Rate Generator 6 */ + CPM_BRG7, /* Baud Rate Generator 7 */ + CPM_BRG8, /* Baud Rate Generator 8 */ + CPM_CLK1, /* Clock 1 */ + CPM_CLK2, /* Clock 2 */ + CPM_CLK3, /* Clock 3 */ + CPM_CLK4, /* Clock 4 */ + CPM_CLK5, /* Clock 5 */ + CPM_CLK6, /* Clock 6 */ + CPM_CLK7, /* Clock 7 */ + CPM_CLK8, /* Clock 8 */ + CPM_CLK9, /* Clock 9 */ + CPM_CLK10, /* Clock 10 */ + CPM_CLK11, /* Clock 11 */ + CPM_CLK12, /* Clock 12 */ + CPM_CLK13, /* Clock 13 */ + CPM_CLK14, /* Clock 14 */ + CPM_CLK15, /* Clock 15 */ + CPM_CLK16, /* Clock 16 */ + CPM_CLK17, /* Clock 17 */ + CPM_CLK18, /* Clock 18 */ + CPM_CLK19, /* Clock 19 */ + CPM_CLK20, /* Clock 20 */ + CPM_CLK_DUMMY +}; + +int __init cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode); +int __init cpm2_smc_clk_setup(enum cpm_clk_target target, int clock); + +#define CPM_PIN_INPUT 0 +#define CPM_PIN_OUTPUT 1 +#define CPM_PIN_PRIMARY 0 +#define CPM_PIN_SECONDARY 2 +#define CPM_PIN_GPIO 4 +#define CPM_PIN_OPENDRAIN 8 + +void __init cpm2_set_pin(int port, int pin, int flags); + +#endif /* __CPM2__ */ +#endif /* __KERNEL__ */ |