summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/include/asm/eeh.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/include/asm/eeh.h')
-rw-r--r--arch/powerpc/include/asm/eeh.h461
1 files changed, 461 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
new file mode 100644
index 0000000000..514dd056c2
--- /dev/null
+++ b/arch/powerpc/include/asm/eeh.h
@@ -0,0 +1,461 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation.
+ * Copyright 2001-2012 IBM Corporation.
+ */
+
+#ifndef _POWERPC_EEH_H
+#define _POWERPC_EEH_H
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <linux/time.h>
+#include <linux/atomic.h>
+
+#include <uapi/asm/eeh.h>
+
+struct pci_dev;
+struct pci_bus;
+struct pci_dn;
+
+#ifdef CONFIG_EEH
+
+/* EEH subsystem flags */
+#define EEH_ENABLED 0x01 /* EEH enabled */
+#define EEH_FORCE_DISABLED 0x02 /* EEH disabled */
+#define EEH_PROBE_MODE_DEV 0x04 /* From PCI device */
+#define EEH_PROBE_MODE_DEVTREE 0x08 /* From device tree */
+#define EEH_ENABLE_IO_FOR_LOG 0x20 /* Enable IO for log */
+#define EEH_EARLY_DUMP_LOG 0x40 /* Dump log immediately */
+
+/*
+ * Delay for PE reset, all in ms
+ *
+ * PCI specification has reset hold time of 100 milliseconds.
+ * We have 250 milliseconds here. The PCI bus settlement time
+ * is specified as 1.5 seconds and we have 1.8 seconds.
+ */
+#define EEH_PE_RST_HOLD_TIME 250
+#define EEH_PE_RST_SETTLE_TIME 1800
+
+/*
+ * The struct is used to trace PE related EEH functionality.
+ * In theory, there will have one instance of the struct to
+ * be created against particular PE. In nature, PEs correlate
+ * to each other. the struct has to reflect that hierarchy in
+ * order to easily pick up those affected PEs when one particular
+ * PE has EEH errors.
+ *
+ * Also, one particular PE might be composed of PCI device, PCI
+ * bus and its subordinate components. The struct also need ship
+ * the information. Further more, one particular PE is only meaingful
+ * in the corresponding PHB. Therefore, the root PEs should be created
+ * against existing PHBs in on-to-one fashion.
+ */
+#define EEH_PE_INVALID (1 << 0) /* Invalid */
+#define EEH_PE_PHB (1 << 1) /* PHB PE */
+#define EEH_PE_DEVICE (1 << 2) /* Device PE */
+#define EEH_PE_BUS (1 << 3) /* Bus PE */
+#define EEH_PE_VF (1 << 4) /* VF PE */
+
+#define EEH_PE_ISOLATED (1 << 0) /* Isolated PE */
+#define EEH_PE_RECOVERING (1 << 1) /* Recovering PE */
+#define EEH_PE_CFG_BLOCKED (1 << 2) /* Block config access */
+#define EEH_PE_RESET (1 << 3) /* PE reset in progress */
+
+#define EEH_PE_KEEP (1 << 8) /* Keep PE on hotplug */
+#define EEH_PE_CFG_RESTRICTED (1 << 9) /* Block config on error */
+#define EEH_PE_REMOVED (1 << 10) /* Removed permanently */
+#define EEH_PE_PRI_BUS (1 << 11) /* Cached primary bus */
+
+struct eeh_pe {
+ int type; /* PE type: PHB/Bus/Device */
+ int state; /* PE EEH dependent mode */
+ int addr; /* PE configuration address */
+ struct pci_controller *phb; /* Associated PHB */
+ struct pci_bus *bus; /* Top PCI bus for bus PE */
+ int check_count; /* Times of ignored error */
+ int freeze_count; /* Times of froze up */
+ time64_t tstamp; /* Time on first-time freeze */
+ int false_positives; /* Times of reported #ff's */
+ atomic_t pass_dev_cnt; /* Count of passed through devs */
+ struct eeh_pe *parent; /* Parent PE */
+ void *data; /* PE auxillary data */
+ struct list_head child_list; /* List of PEs below this PE */
+ struct list_head child; /* Memb. child_list/eeh_phb_pe */
+ struct list_head edevs; /* List of eeh_dev in this PE */
+
+#ifdef CONFIG_STACKTRACE
+ /*
+ * Saved stack trace. When we find a PE freeze in eeh_dev_check_failure
+ * the stack trace is saved here so we can print it in the recovery
+ * thread if it turns out to due to a real problem rather than
+ * a hot-remove.
+ *
+ * A max of 64 entries might be overkill, but it also might not be.
+ */
+ unsigned long stack_trace[64];
+ int trace_entries;
+#endif /* CONFIG_STACKTRACE */
+};
+
+#define eeh_pe_for_each_dev(pe, edev, tmp) \
+ list_for_each_entry_safe(edev, tmp, &pe->edevs, entry)
+
+#define eeh_for_each_pe(root, pe) \
+ for (pe = root; pe; pe = eeh_pe_next(pe, root))
+
+static inline bool eeh_pe_passed(struct eeh_pe *pe)
+{
+ return pe ? !!atomic_read(&pe->pass_dev_cnt) : false;
+}
+
+/*
+ * The struct is used to trace EEH state for the associated
+ * PCI device node or PCI device. In future, it might
+ * represent PE as well so that the EEH device to form
+ * another tree except the currently existing tree of PCI
+ * buses and PCI devices
+ */
+#define EEH_DEV_BRIDGE (1 << 0) /* PCI bridge */
+#define EEH_DEV_ROOT_PORT (1 << 1) /* PCIe root port */
+#define EEH_DEV_DS_PORT (1 << 2) /* Downstream port */
+#define EEH_DEV_IRQ_DISABLED (1 << 3) /* Interrupt disabled */
+#define EEH_DEV_DISCONNECTED (1 << 4) /* Removing from PE */
+
+#define EEH_DEV_NO_HANDLER (1 << 8) /* No error handler */
+#define EEH_DEV_SYSFS (1 << 9) /* Sysfs created */
+#define EEH_DEV_REMOVED (1 << 10) /* Removed permanently */
+
+struct eeh_dev {
+ int mode; /* EEH mode */
+ int bdfn; /* bdfn of device (for cfg ops) */
+ struct pci_controller *controller;
+ int pe_config_addr; /* PE config address */
+ u32 config_space[16]; /* Saved PCI config space */
+ int pcix_cap; /* Saved PCIx capability */
+ int pcie_cap; /* Saved PCIe capability */
+ int aer_cap; /* Saved AER capability */
+ int af_cap; /* Saved AF capability */
+ struct eeh_pe *pe; /* Associated PE */
+ struct list_head entry; /* Membership in eeh_pe.edevs */
+ struct list_head rmv_entry; /* Membership in rmv_list */
+ struct pci_dn *pdn; /* Associated PCI device node */
+ struct pci_dev *pdev; /* Associated PCI device */
+ bool in_error; /* Error flag for edev */
+
+ /* VF specific properties */
+ struct pci_dev *physfn; /* Associated SRIOV PF */
+ int vf_index; /* Index of this VF */
+};
+
+/* "fmt" must be a simple literal string */
+#define EEH_EDEV_PRINT(level, edev, fmt, ...) \
+ pr_##level("PCI %04x:%02x:%02x.%x#%04x: EEH: " fmt, \
+ (edev)->controller->global_number, PCI_BUSNO((edev)->bdfn), \
+ PCI_SLOT((edev)->bdfn), PCI_FUNC((edev)->bdfn), \
+ ((edev)->pe ? (edev)->pe_config_addr : 0xffff), ##__VA_ARGS__)
+#define eeh_edev_dbg(edev, fmt, ...) EEH_EDEV_PRINT(debug, (edev), fmt, ##__VA_ARGS__)
+#define eeh_edev_info(edev, fmt, ...) EEH_EDEV_PRINT(info, (edev), fmt, ##__VA_ARGS__)
+#define eeh_edev_warn(edev, fmt, ...) EEH_EDEV_PRINT(warn, (edev), fmt, ##__VA_ARGS__)
+#define eeh_edev_err(edev, fmt, ...) EEH_EDEV_PRINT(err, (edev), fmt, ##__VA_ARGS__)
+
+static inline struct pci_dn *eeh_dev_to_pdn(struct eeh_dev *edev)
+{
+ return edev ? edev->pdn : NULL;
+}
+
+static inline struct pci_dev *eeh_dev_to_pci_dev(struct eeh_dev *edev)
+{
+ return edev ? edev->pdev : NULL;
+}
+
+static inline struct eeh_pe *eeh_dev_to_pe(struct eeh_dev* edev)
+{
+ return edev ? edev->pe : NULL;
+}
+
+/* Return values from eeh_ops::next_error */
+enum {
+ EEH_NEXT_ERR_NONE = 0,
+ EEH_NEXT_ERR_INF,
+ EEH_NEXT_ERR_FROZEN_PE,
+ EEH_NEXT_ERR_FENCED_PHB,
+ EEH_NEXT_ERR_DEAD_PHB,
+ EEH_NEXT_ERR_DEAD_IOC
+};
+
+/*
+ * The struct is used to trace the registered EEH operation
+ * callback functions. Actually, those operation callback
+ * functions are heavily platform dependent. That means the
+ * platform should register its own EEH operation callback
+ * functions before any EEH further operations.
+ */
+#define EEH_OPT_DISABLE 0 /* EEH disable */
+#define EEH_OPT_ENABLE 1 /* EEH enable */
+#define EEH_OPT_THAW_MMIO 2 /* MMIO enable */
+#define EEH_OPT_THAW_DMA 3 /* DMA enable */
+#define EEH_OPT_FREEZE_PE 4 /* Freeze PE */
+#define EEH_STATE_UNAVAILABLE (1 << 0) /* State unavailable */
+#define EEH_STATE_NOT_SUPPORT (1 << 1) /* EEH not supported */
+#define EEH_STATE_RESET_ACTIVE (1 << 2) /* Active reset */
+#define EEH_STATE_MMIO_ACTIVE (1 << 3) /* Active MMIO */
+#define EEH_STATE_DMA_ACTIVE (1 << 4) /* Active DMA */
+#define EEH_STATE_MMIO_ENABLED (1 << 5) /* MMIO enabled */
+#define EEH_STATE_DMA_ENABLED (1 << 6) /* DMA enabled */
+#define EEH_RESET_DEACTIVATE 0 /* Deactivate the PE reset */
+#define EEH_RESET_HOT 1 /* Hot reset */
+#define EEH_RESET_FUNDAMENTAL 3 /* Fundamental reset */
+#define EEH_LOG_TEMP 1 /* EEH temporary error log */
+#define EEH_LOG_PERM 2 /* EEH permanent error log */
+
+struct eeh_ops {
+ char *name;
+ struct eeh_dev *(*probe)(struct pci_dev *pdev);
+ int (*set_option)(struct eeh_pe *pe, int option);
+ int (*get_state)(struct eeh_pe *pe, int *delay);
+ int (*reset)(struct eeh_pe *pe, int option);
+ int (*get_log)(struct eeh_pe *pe, int severity, char *drv_log, unsigned long len);
+ int (*configure_bridge)(struct eeh_pe *pe);
+ int (*err_inject)(struct eeh_pe *pe, int type, int func,
+ unsigned long addr, unsigned long mask);
+ int (*read_config)(struct eeh_dev *edev, int where, int size, u32 *val);
+ int (*write_config)(struct eeh_dev *edev, int where, int size, u32 val);
+ int (*next_error)(struct eeh_pe **pe);
+ int (*restore_config)(struct eeh_dev *edev);
+ int (*notify_resume)(struct eeh_dev *edev);
+};
+
+extern int eeh_subsystem_flags;
+extern u32 eeh_max_freezes;
+extern bool eeh_debugfs_no_recover;
+extern struct eeh_ops *eeh_ops;
+extern raw_spinlock_t confirm_error_lock;
+
+static inline void eeh_add_flag(int flag)
+{
+ eeh_subsystem_flags |= flag;
+}
+
+static inline void eeh_clear_flag(int flag)
+{
+ eeh_subsystem_flags &= ~flag;
+}
+
+static inline bool eeh_has_flag(int flag)
+{
+ return !!(eeh_subsystem_flags & flag);
+}
+
+static inline bool eeh_enabled(void)
+{
+ return eeh_has_flag(EEH_ENABLED) && !eeh_has_flag(EEH_FORCE_DISABLED);
+}
+
+static inline void eeh_serialize_lock(unsigned long *flags)
+{
+ raw_spin_lock_irqsave(&confirm_error_lock, *flags);
+}
+
+static inline void eeh_serialize_unlock(unsigned long flags)
+{
+ raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
+}
+
+static inline bool eeh_state_active(int state)
+{
+ return (state & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE))
+ == (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE);
+}
+
+typedef void (*eeh_edev_traverse_func)(struct eeh_dev *edev, void *flag);
+typedef void *(*eeh_pe_traverse_func)(struct eeh_pe *pe, void *flag);
+void eeh_set_pe_aux_size(int size);
+int eeh_phb_pe_create(struct pci_controller *phb);
+int eeh_wait_state(struct eeh_pe *pe, int max_wait);
+struct eeh_pe *eeh_phb_pe_get(struct pci_controller *phb);
+struct eeh_pe *eeh_pe_next(struct eeh_pe *pe, struct eeh_pe *root);
+struct eeh_pe *eeh_pe_get(struct pci_controller *phb, int pe_no);
+int eeh_pe_tree_insert(struct eeh_dev *edev, struct eeh_pe *new_pe_parent);
+int eeh_pe_tree_remove(struct eeh_dev *edev);
+void eeh_pe_update_time_stamp(struct eeh_pe *pe);
+void *eeh_pe_traverse(struct eeh_pe *root,
+ eeh_pe_traverse_func fn, void *flag);
+void eeh_pe_dev_traverse(struct eeh_pe *root,
+ eeh_edev_traverse_func fn, void *flag);
+void eeh_pe_restore_bars(struct eeh_pe *pe);
+const char *eeh_pe_loc_get(struct eeh_pe *pe);
+struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe);
+
+void eeh_show_enabled(void);
+int __init eeh_init(struct eeh_ops *ops);
+int eeh_check_failure(const volatile void __iomem *token);
+int eeh_dev_check_failure(struct eeh_dev *edev);
+void eeh_addr_cache_init(void);
+void eeh_probe_device(struct pci_dev *pdev);
+void eeh_remove_device(struct pci_dev *);
+int eeh_unfreeze_pe(struct eeh_pe *pe);
+int eeh_pe_reset_and_recover(struct eeh_pe *pe);
+int eeh_dev_open(struct pci_dev *pdev);
+void eeh_dev_release(struct pci_dev *pdev);
+struct eeh_pe *eeh_iommu_group_to_pe(struct iommu_group *group);
+int eeh_pe_set_option(struct eeh_pe *pe, int option);
+int eeh_pe_get_state(struct eeh_pe *pe);
+int eeh_pe_reset(struct eeh_pe *pe, int option, bool include_passed);
+int eeh_pe_configure(struct eeh_pe *pe);
+int eeh_pe_inject_err(struct eeh_pe *pe, int type, int func,
+ unsigned long addr, unsigned long mask);
+
+/**
+ * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
+ *
+ * If this macro yields TRUE, the caller relays to eeh_check_failure()
+ * which does further tests out of line.
+ */
+#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_enabled())
+
+/*
+ * Reads from a device which has been isolated by EEH will return
+ * all 1s. This macro gives an all-1s value of the given size (in
+ * bytes: 1, 2, or 4) for comparing with the result of a read.
+ */
+#define EEH_IO_ERROR_VALUE(size) (~0U >> ((4 - (size)) * 8))
+
+#else /* !CONFIG_EEH */
+
+static inline bool eeh_enabled(void)
+{
+ return false;
+}
+
+static inline void eeh_show_enabled(void) { }
+
+static inline int eeh_check_failure(const volatile void __iomem *token)
+{
+ return 0;
+}
+
+#define eeh_dev_check_failure(x) (0)
+
+static inline void eeh_addr_cache_init(void) { }
+
+static inline void eeh_probe_device(struct pci_dev *dev) { }
+
+static inline void eeh_remove_device(struct pci_dev *dev) { }
+
+#define EEH_POSSIBLE_ERROR(val, type) (0)
+#define EEH_IO_ERROR_VALUE(size) (-1UL)
+static inline int eeh_phb_pe_create(struct pci_controller *phb) { return 0; }
+#endif /* CONFIG_EEH */
+
+#if defined(CONFIG_PPC_PSERIES) && defined(CONFIG_EEH)
+void pseries_eeh_init_edev_recursive(struct pci_dn *pdn);
+#endif
+
+#ifdef CONFIG_PPC64
+/*
+ * MMIO read/write operations with EEH support.
+ */
+static inline u8 eeh_readb(const volatile void __iomem *addr)
+{
+ u8 val = in_8(addr);
+ if (EEH_POSSIBLE_ERROR(val, u8))
+ eeh_check_failure(addr);
+ return val;
+}
+
+static inline u16 eeh_readw(const volatile void __iomem *addr)
+{
+ u16 val = in_le16(addr);
+ if (EEH_POSSIBLE_ERROR(val, u16))
+ eeh_check_failure(addr);
+ return val;
+}
+
+static inline u32 eeh_readl(const volatile void __iomem *addr)
+{
+ u32 val = in_le32(addr);
+ if (EEH_POSSIBLE_ERROR(val, u32))
+ eeh_check_failure(addr);
+ return val;
+}
+
+static inline u64 eeh_readq(const volatile void __iomem *addr)
+{
+ u64 val = in_le64(addr);
+ if (EEH_POSSIBLE_ERROR(val, u64))
+ eeh_check_failure(addr);
+ return val;
+}
+
+static inline u16 eeh_readw_be(const volatile void __iomem *addr)
+{
+ u16 val = in_be16(addr);
+ if (EEH_POSSIBLE_ERROR(val, u16))
+ eeh_check_failure(addr);
+ return val;
+}
+
+static inline u32 eeh_readl_be(const volatile void __iomem *addr)
+{
+ u32 val = in_be32(addr);
+ if (EEH_POSSIBLE_ERROR(val, u32))
+ eeh_check_failure(addr);
+ return val;
+}
+
+static inline u64 eeh_readq_be(const volatile void __iomem *addr)
+{
+ u64 val = in_be64(addr);
+ if (EEH_POSSIBLE_ERROR(val, u64))
+ eeh_check_failure(addr);
+ return val;
+}
+
+static inline void eeh_memcpy_fromio(void *dest, const
+ volatile void __iomem *src,
+ unsigned long n)
+{
+ _memcpy_fromio(dest, src, n);
+
+ /* Look for ffff's here at dest[n]. Assume that at least 4 bytes
+ * were copied. Check all four bytes.
+ */
+ if (n >= 4 && EEH_POSSIBLE_ERROR(*((u32 *)(dest + n - 4)), u32))
+ eeh_check_failure(src);
+}
+
+/* in-string eeh macros */
+static inline void eeh_readsb(const volatile void __iomem *addr, void * buf,
+ int ns)
+{
+ _insb(addr, buf, ns);
+ if (EEH_POSSIBLE_ERROR((*(((u8*)buf)+ns-1)), u8))
+ eeh_check_failure(addr);
+}
+
+static inline void eeh_readsw(const volatile void __iomem *addr, void * buf,
+ int ns)
+{
+ _insw(addr, buf, ns);
+ if (EEH_POSSIBLE_ERROR((*(((u16*)buf)+ns-1)), u16))
+ eeh_check_failure(addr);
+}
+
+static inline void eeh_readsl(const volatile void __iomem *addr, void * buf,
+ int nl)
+{
+ _insl(addr, buf, nl);
+ if (EEH_POSSIBLE_ERROR((*(((u32*)buf)+nl-1)), u32))
+ eeh_check_failure(addr);
+}
+
+
+void __init eeh_cache_debugfs_init(void);
+
+#endif /* CONFIG_PPC64 */
+#endif /* __KERNEL__ */
+#endif /* _POWERPC_EEH_H */