diff options
Diffstat (limited to 'arch/powerpc/include/asm/tsi108.h')
-rw-r--r-- | arch/powerpc/include/asm/tsi108.h | 113 |
1 files changed, 113 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/tsi108.h b/arch/powerpc/include/asm/tsi108.h new file mode 100644 index 0000000000..8a2b6427d3 --- /dev/null +++ b/arch/powerpc/include/asm/tsi108.h @@ -0,0 +1,113 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * common routine and memory layout for Tundra TSI108(Grendel) host bridge + * memory controller. + * + * Author: Jacob Pan (jacob.pan@freescale.com) + * Alex Bounine (alexandreb@tundra.com) + * + * Copyright 2004-2006 Freescale Semiconductor, Inc. + */ + +#ifndef __PPC_KERNEL_TSI108_H +#define __PPC_KERNEL_TSI108_H + +#include <asm/pci-bridge.h> + +/* Size of entire register space */ +#define TSI108_REG_SIZE (0x10000) + +/* Sizes of register spaces for individual blocks */ +#define TSI108_HLP_SIZE 0x1000 +#define TSI108_PCI_SIZE 0x1000 +#define TSI108_CLK_SIZE 0x1000 +#define TSI108_PB_SIZE 0x1000 +#define TSI108_SD_SIZE 0x1000 +#define TSI108_DMA_SIZE 0x1000 +#define TSI108_ETH_SIZE 0x1000 +#define TSI108_I2C_SIZE 0x400 +#define TSI108_MPIC_SIZE 0x400 +#define TSI108_UART0_SIZE 0x200 +#define TSI108_GPIO_SIZE 0x200 +#define TSI108_UART1_SIZE 0x200 + +/* Offsets within Tsi108(A) CSR space for individual blocks */ +#define TSI108_HLP_OFFSET 0x0000 +#define TSI108_PCI_OFFSET 0x1000 +#define TSI108_CLK_OFFSET 0x2000 +#define TSI108_PB_OFFSET 0x3000 +#define TSI108_SD_OFFSET 0x4000 +#define TSI108_DMA_OFFSET 0x5000 +#define TSI108_ETH_OFFSET 0x6000 +#define TSI108_I2C_OFFSET 0x7000 +#define TSI108_MPIC_OFFSET 0x7400 +#define TSI108_UART0_OFFSET 0x7800 +#define TSI108_GPIO_OFFSET 0x7A00 +#define TSI108_UART1_OFFSET 0x7C00 + +/* Tsi108 registers used by common code components */ +#define TSI108_PCI_CSR (0x004) +#define TSI108_PCI_IRP_CFG_CTL (0x180) +#define TSI108_PCI_IRP_STAT (0x184) +#define TSI108_PCI_IRP_ENABLE (0x188) +#define TSI108_PCI_IRP_INTAD (0x18C) + +#define TSI108_PCI_IRP_STAT_P_INT (0x00400000) +#define TSI108_PCI_IRP_ENABLE_P_INT (0x00400000) + +#define TSI108_CG_PWRUP_STATUS (0x234) + +#define TSI108_PB_ISR (0x00C) +#define TSI108_PB_ERRCS (0x404) +#define TSI108_PB_AERR (0x408) + +#define TSI108_PB_ERRCS_ES (1 << 1) +#define TSI108_PB_ISR_PBS_RD_ERR (1 << 8) + +#define TSI108_PCI_CFG_SIZE (0x01000000) + +/* + * PHY Configuration Options + * + * Specify "bcm54xx" in the compatible property of your device tree phy + * nodes if your board uses the Broadcom PHYs + */ +#define TSI108_PHY_MV88E 0 /* Marvel 88Exxxx PHY */ +#define TSI108_PHY_BCM54XX 1 /* Broadcom BCM54xx PHY */ + +/* Global variables */ + +extern u32 tsi108_pci_cfg_base; +/* Exported functions */ + +extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val); +extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 * val); +extern void tsi108_clear_pci_error(u32 pci_cfg_base); + +extern phys_addr_t get_csrbase(void); + +typedef struct { + u32 regs; /* hw registers base address */ + u32 phyregs; /* phy registers base address */ + u16 phy; /* phy address */ + u16 irq_num; /* irq number */ + u8 mac_addr[6]; /* phy mac address */ + u16 phy_type; /* type of phy on board */ +} hw_info; + +extern u32 get_vir_csrbase(void); +extern u32 tsi108_csr_vir_base; + +static inline u32 tsi108_read_reg(u32 reg_offset) +{ + return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset)); +} + +static inline void tsi108_write_reg(u32 reg_offset, u32 val) +{ + out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val); +} + +#endif /* __PPC_KERNEL_TSI108_H */ |