diff options
Diffstat (limited to 'arch/powerpc/kernel/pci-common.c')
| -rw-r--r-- | arch/powerpc/kernel/pci-common.c | 1736 |
1 files changed, 1736 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c new file mode 100644 index 0000000000..040255ddb5 --- /dev/null +++ b/arch/powerpc/kernel/pci-common.c @@ -0,0 +1,1736 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Contains common pci routines for ALL ppc platform + * (based on pci_32.c and pci_64.c) + * + * Port for PPC64 David Engebretsen, IBM Corp. + * Contains common pci routines for ppc64 platform, pSeries and iSeries brands. + * + * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM + * Rework, based on alpha PCI code. + * + * Common pmac/prep/chrp pci routines. -- Cort + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/export.h> +#include <linux/of_address.h> +#include <linux/of_pci.h> +#include <linux/mm.h> +#include <linux/shmem_fs.h> +#include <linux/list.h> +#include <linux/syscalls.h> +#include <linux/irq.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> +#include <linux/vgaarb.h> +#include <linux/numa.h> +#include <linux/msi.h> +#include <linux/irqdomain.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/pci-bridge.h> +#include <asm/byteorder.h> +#include <asm/machdep.h> +#include <asm/ppc-pci.h> +#include <asm/eeh.h> +#include <asm/setup.h> + +#include "../../../drivers/pci/pci.h" + +/* hose_spinlock protects accesses to the phb_bitmap. */ +static DEFINE_SPINLOCK(hose_spinlock); +LIST_HEAD(hose_list); + +/* For dynamic PHB numbering on get_phb_number(): max number of PHBs. */ +#define MAX_PHBS 0x10000 + +/* + * For dynamic PHB numbering: used/free PHBs tracking bitmap. + * Accesses to this bitmap should be protected by hose_spinlock. + */ +static DECLARE_BITMAP(phb_bitmap, MAX_PHBS); + +/* ISA Memory physical address */ +resource_size_t isa_mem_base; +EXPORT_SYMBOL(isa_mem_base); + + +static const struct dma_map_ops *pci_dma_ops; + +void __init set_pci_dma_ops(const struct dma_map_ops *dma_ops) +{ + pci_dma_ops = dma_ops; +} + +static int get_phb_number(struct device_node *dn) +{ + int ret, phb_id = -1; + u64 prop; + + /* + * Try fixed PHB numbering first, by checking archs and reading + * the respective device-tree properties. Firstly, try reading + * standard "linux,pci-domain", then try reading "ibm,opal-phbid" + * (only present in powernv OPAL environment), then try device-tree + * alias and as the last try to use lower bits of "reg" property. + */ + ret = of_get_pci_domain_nr(dn); + if (ret >= 0) { + prop = ret; + ret = 0; + } + if (ret) + ret = of_property_read_u64(dn, "ibm,opal-phbid", &prop); + + if (ret) { + ret = of_alias_get_id(dn, "pci"); + if (ret >= 0) { + prop = ret; + ret = 0; + } + } + if (ret) { + u32 prop_32; + ret = of_property_read_u32_index(dn, "reg", 1, &prop_32); + prop = prop_32; + } + + if (!ret) + phb_id = (int)(prop & (MAX_PHBS - 1)); + + spin_lock(&hose_spinlock); + + /* We need to be sure to not use the same PHB number twice. */ + if ((phb_id >= 0) && !test_and_set_bit(phb_id, phb_bitmap)) + goto out_unlock; + + /* If everything fails then fallback to dynamic PHB numbering. */ + phb_id = find_first_zero_bit(phb_bitmap, MAX_PHBS); + BUG_ON(phb_id >= MAX_PHBS); + set_bit(phb_id, phb_bitmap); + +out_unlock: + spin_unlock(&hose_spinlock); + + return phb_id; +} + +struct pci_controller *pcibios_alloc_controller(struct device_node *dev) +{ + struct pci_controller *phb; + + phb = kzalloc(sizeof(struct pci_controller), GFP_KERNEL); + if (phb == NULL) + return NULL; + + phb->global_number = get_phb_number(dev); + + spin_lock(&hose_spinlock); + list_add_tail(&phb->list_node, &hose_list); + spin_unlock(&hose_spinlock); + + phb->dn = of_node_get(dev); + phb->is_dynamic = slab_is_available(); +#ifdef CONFIG_PPC64 + if (dev) { + int nid = of_node_to_nid(dev); + + if (nid < 0 || !node_online(nid)) + nid = NUMA_NO_NODE; + + PHB_SET_NODE(phb, nid); + } +#endif + return phb; +} +EXPORT_SYMBOL_GPL(pcibios_alloc_controller); + +void pcibios_free_controller(struct pci_controller *phb) +{ + spin_lock(&hose_spinlock); + + /* Clear bit of phb_bitmap to allow reuse of this PHB number. */ + if (phb->global_number < MAX_PHBS) + clear_bit(phb->global_number, phb_bitmap); + of_node_put(phb->dn); + list_del(&phb->list_node); + spin_unlock(&hose_spinlock); + + if (phb->is_dynamic) + kfree(phb); +} +EXPORT_SYMBOL_GPL(pcibios_free_controller); + +/* + * This function is used to call pcibios_free_controller() + * in a deferred manner: a callback from the PCI subsystem. + * + * _*DO NOT*_ call pcibios_free_controller() explicitly if + * this is used (or it may access an invalid *phb pointer). + * + * The callback occurs when all references to the root bus + * are dropped (e.g., child buses/devices and their users). + * + * It's called as .release_fn() of 'struct pci_host_bridge' + * which is associated with the 'struct pci_controller.bus' + * (root bus) - it expects .release_data to hold a pointer + * to 'struct pci_controller'. + * + * In order to use it, register .release_fn()/release_data + * like this: + * + * pci_set_host_bridge_release(bridge, + * pcibios_free_controller_deferred + * (void *) phb); + * + * e.g. in the pcibios_root_bridge_prepare() callback from + * pci_create_root_bus(). + */ +void pcibios_free_controller_deferred(struct pci_host_bridge *bridge) +{ + struct pci_controller *phb = (struct pci_controller *) + bridge->release_data; + + pr_debug("domain %d, dynamic %d\n", phb->global_number, phb->is_dynamic); + + pcibios_free_controller(phb); +} +EXPORT_SYMBOL_GPL(pcibios_free_controller_deferred); + +/* + * The function is used to return the minimal alignment + * for memory or I/O windows of the associated P2P bridge. + * By default, 4KiB alignment for I/O windows and 1MiB for + * memory windows. + */ +resource_size_t pcibios_window_alignment(struct pci_bus *bus, + unsigned long type) +{ + struct pci_controller *phb = pci_bus_to_host(bus); + + if (phb->controller_ops.window_alignment) + return phb->controller_ops.window_alignment(bus, type); + + /* + * PCI core will figure out the default + * alignment: 4KiB for I/O and 1MiB for + * memory window. + */ + return 1; +} + +void pcibios_setup_bridge(struct pci_bus *bus, unsigned long type) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + + if (hose->controller_ops.setup_bridge) + hose->controller_ops.setup_bridge(bus, type); +} + +void pcibios_reset_secondary_bus(struct pci_dev *dev) +{ + struct pci_controller *phb = pci_bus_to_host(dev->bus); + + if (phb->controller_ops.reset_secondary_bus) { + phb->controller_ops.reset_secondary_bus(dev); + return; + } + + pci_reset_secondary_bus(dev); +} + +resource_size_t pcibios_default_alignment(void) +{ + if (ppc_md.pcibios_default_alignment) + return ppc_md.pcibios_default_alignment(); + + return 0; +} + +#ifdef CONFIG_PCI_IOV +resource_size_t pcibios_iov_resource_alignment(struct pci_dev *pdev, int resno) +{ + if (ppc_md.pcibios_iov_resource_alignment) + return ppc_md.pcibios_iov_resource_alignment(pdev, resno); + + return pci_iov_resource_size(pdev, resno); +} + +int pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs) +{ + if (ppc_md.pcibios_sriov_enable) + return ppc_md.pcibios_sriov_enable(pdev, num_vfs); + + return 0; +} + +int pcibios_sriov_disable(struct pci_dev *pdev) +{ + if (ppc_md.pcibios_sriov_disable) + return ppc_md.pcibios_sriov_disable(pdev); + + return 0; +} + +#endif /* CONFIG_PCI_IOV */ + +static resource_size_t pcibios_io_size(const struct pci_controller *hose) +{ +#ifdef CONFIG_PPC64 + return hose->pci_io_size; +#else + return resource_size(&hose->io_resource); +#endif +} + +int pcibios_vaddr_is_ioport(void __iomem *address) +{ + int ret = 0; + struct pci_controller *hose; + resource_size_t size; + + spin_lock(&hose_spinlock); + list_for_each_entry(hose, &hose_list, list_node) { + size = pcibios_io_size(hose); + if (address >= hose->io_base_virt && + address < (hose->io_base_virt + size)) { + ret = 1; + break; + } + } + spin_unlock(&hose_spinlock); + return ret; +} + +unsigned long pci_address_to_pio(phys_addr_t address) +{ + struct pci_controller *hose; + resource_size_t size; + unsigned long ret = ~0; + + spin_lock(&hose_spinlock); + list_for_each_entry(hose, &hose_list, list_node) { + size = pcibios_io_size(hose); + if (address >= hose->io_base_phys && + address < (hose->io_base_phys + size)) { + unsigned long base = + (unsigned long)hose->io_base_virt - _IO_BASE; + ret = base + (address - hose->io_base_phys); + break; + } + } + spin_unlock(&hose_spinlock); + + return ret; +} +EXPORT_SYMBOL_GPL(pci_address_to_pio); + +/* + * Return the domain number for this bus. + */ +int pci_domain_nr(struct pci_bus *bus) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + + return hose->global_number; +} +EXPORT_SYMBOL(pci_domain_nr); + +/* This routine is meant to be used early during boot, when the + * PCI bus numbers have not yet been assigned, and you need to + * issue PCI config cycles to an OF device. + * It could also be used to "fix" RTAS config cycles if you want + * to set pci_assign_all_buses to 1 and still use RTAS for PCI + * config cycles. + */ +struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) +{ + while(node) { + struct pci_controller *hose, *tmp; + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) + if (hose->dn == node) + return hose; + node = node->parent; + } + return NULL; +} + +struct pci_controller *pci_find_controller_for_domain(int domain_nr) +{ + struct pci_controller *hose; + + list_for_each_entry(hose, &hose_list, list_node) + if (hose->global_number == domain_nr) + return hose; + + return NULL; +} + +struct pci_intx_virq { + int virq; + struct kref kref; + struct list_head list_node; +}; + +static LIST_HEAD(intx_list); +static DEFINE_MUTEX(intx_mutex); + +static void ppc_pci_intx_release(struct kref *kref) +{ + struct pci_intx_virq *vi = container_of(kref, struct pci_intx_virq, kref); + + list_del(&vi->list_node); + irq_dispose_mapping(vi->virq); + kfree(vi); +} + +static int ppc_pci_unmap_irq_line(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct pci_dev *pdev = to_pci_dev(data); + + if (action == BUS_NOTIFY_DEL_DEVICE) { + struct pci_intx_virq *vi; + + mutex_lock(&intx_mutex); + list_for_each_entry(vi, &intx_list, list_node) { + if (vi->virq == pdev->irq) { + kref_put(&vi->kref, ppc_pci_intx_release); + break; + } + } + mutex_unlock(&intx_mutex); + } + + return NOTIFY_DONE; +} + +static struct notifier_block ppc_pci_unmap_irq_notifier = { + .notifier_call = ppc_pci_unmap_irq_line, +}; + +static int ppc_pci_register_irq_notifier(void) +{ + return bus_register_notifier(&pci_bus_type, &ppc_pci_unmap_irq_notifier); +} +arch_initcall(ppc_pci_register_irq_notifier); + +/* + * Reads the interrupt pin to determine if interrupt is use by card. + * If the interrupt is used, then gets the interrupt line from the + * openfirmware and sets it in the pci_dev and pci_config line. + */ +static int pci_read_irq_line(struct pci_dev *pci_dev) +{ + int virq; + struct pci_intx_virq *vi, *vitmp; + + /* Preallocate vi as rewind is complex if this fails after mapping */ + vi = kzalloc(sizeof(struct pci_intx_virq), GFP_KERNEL); + if (!vi) + return -1; + + pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev)); + + /* Try to get a mapping from the device-tree */ + virq = of_irq_parse_and_map_pci(pci_dev, 0, 0); + if (virq <= 0) { + u8 line, pin; + + /* If that fails, lets fallback to what is in the config + * space and map that through the default controller. We + * also set the type to level low since that's what PCI + * interrupts are. If your platform does differently, then + * either provide a proper interrupt tree or don't use this + * function. + */ + if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin)) + goto error_exit; + if (pin == 0) + goto error_exit; + if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) || + line == 0xff || line == 0) { + goto error_exit; + } + pr_debug(" No map ! Using line %d (pin %d) from PCI config\n", + line, pin); + + virq = irq_create_mapping(NULL, line); + if (virq) + irq_set_irq_type(virq, IRQ_TYPE_LEVEL_LOW); + } + + if (!virq) { + pr_debug(" Failed to map !\n"); + goto error_exit; + } + + pr_debug(" Mapped to linux irq %d\n", virq); + + pci_dev->irq = virq; + + mutex_lock(&intx_mutex); + list_for_each_entry(vitmp, &intx_list, list_node) { + if (vitmp->virq == virq) { + kref_get(&vitmp->kref); + kfree(vi); + vi = NULL; + break; + } + } + if (vi) { + vi->virq = virq; + kref_init(&vi->kref); + list_add_tail(&vi->list_node, &intx_list); + } + mutex_unlock(&intx_mutex); + + return 0; +error_exit: + kfree(vi); + return -1; +} + +/* + * Platform support for /proc/bus/pci/X/Y mmap()s. + * -- paulus. + */ +int pci_iobar_pfn(struct pci_dev *pdev, int bar, struct vm_area_struct *vma) +{ + struct pci_controller *hose = pci_bus_to_host(pdev->bus); + resource_size_t ioaddr = pci_resource_start(pdev, bar); + + if (!hose) + return -EINVAL; + + /* Convert to an offset within this PCI controller */ + ioaddr -= (unsigned long)hose->io_base_virt - _IO_BASE; + + vma->vm_pgoff += (ioaddr + hose->io_base_phys) >> PAGE_SHIFT; + return 0; +} + +/* + * This one is used by /dev/mem and fbdev who have no clue about the + * PCI device, it tries to find the PCI device first and calls the + * above routine + */ +pgprot_t pci_phys_mem_access_prot(struct file *file, + unsigned long pfn, + unsigned long size, + pgprot_t prot) +{ + struct pci_dev *pdev = NULL; + struct resource *found = NULL; + resource_size_t offset = ((resource_size_t)pfn) << PAGE_SHIFT; + int i; + + if (page_is_ram(pfn)) + return prot; + + prot = pgprot_noncached(prot); + for_each_pci_dev(pdev) { + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + struct resource *rp = &pdev->resource[i]; + int flags = rp->flags; + + /* Active and same type? */ + if ((flags & IORESOURCE_MEM) == 0) + continue; + /* In the range of this resource? */ + if (offset < (rp->start & PAGE_MASK) || + offset > rp->end) + continue; + found = rp; + break; + } + if (found) + break; + } + if (found) { + if (found->flags & IORESOURCE_PREFETCH) + prot = pgprot_noncached_wc(prot); + pci_dev_put(pdev); + } + + pr_debug("PCI: Non-PCI map for %llx, prot: %lx\n", + (unsigned long long)offset, pgprot_val(prot)); + + return prot; +} + +/* This provides legacy IO read access on a bus */ +int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size) +{ + unsigned long offset; + struct pci_controller *hose = pci_bus_to_host(bus); + struct resource *rp = &hose->io_resource; + void __iomem *addr; + + /* Check if port can be supported by that bus. We only check + * the ranges of the PHB though, not the bus itself as the rules + * for forwarding legacy cycles down bridges are not our problem + * here. So if the host bridge supports it, we do it. + */ + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + offset += port; + + if (!(rp->flags & IORESOURCE_IO)) + return -ENXIO; + if (offset < rp->start || (offset + size) > rp->end) + return -ENXIO; + addr = hose->io_base_virt + port; + + switch(size) { + case 1: + *((u8 *)val) = in_8(addr); + return 1; + case 2: + if (port & 1) + return -EINVAL; + *((u16 *)val) = in_le16(addr); + return 2; + case 4: + if (port & 3) + return -EINVAL; + *((u32 *)val) = in_le32(addr); + return 4; + } + return -EINVAL; +} + +/* This provides legacy IO write access on a bus */ +int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size) +{ + unsigned long offset; + struct pci_controller *hose = pci_bus_to_host(bus); + struct resource *rp = &hose->io_resource; + void __iomem *addr; + + /* Check if port can be supported by that bus. We only check + * the ranges of the PHB though, not the bus itself as the rules + * for forwarding legacy cycles down bridges are not our problem + * here. So if the host bridge supports it, we do it. + */ + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + offset += port; + + if (!(rp->flags & IORESOURCE_IO)) + return -ENXIO; + if (offset < rp->start || (offset + size) > rp->end) + return -ENXIO; + addr = hose->io_base_virt + port; + + /* WARNING: The generic code is idiotic. It gets passed a pointer + * to what can be a 1, 2 or 4 byte quantity and always reads that + * as a u32, which means that we have to correct the location of + * the data read within those 32 bits for size 1 and 2 + */ + switch(size) { + case 1: + out_8(addr, val >> 24); + return 1; + case 2: + if (port & 1) + return -EINVAL; + out_le16(addr, val >> 16); + return 2; + case 4: + if (port & 3) + return -EINVAL; + out_le32(addr, val); + return 4; + } + return -EINVAL; +} + +/* This provides legacy IO or memory mmap access on a bus */ +int pci_mmap_legacy_page_range(struct pci_bus *bus, + struct vm_area_struct *vma, + enum pci_mmap_state mmap_state) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + resource_size_t offset = + ((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT; + resource_size_t size = vma->vm_end - vma->vm_start; + struct resource *rp; + + pr_debug("pci_mmap_legacy_page_range(%04x:%02x, %s @%llx..%llx)\n", + pci_domain_nr(bus), bus->number, + mmap_state == pci_mmap_mem ? "MEM" : "IO", + (unsigned long long)offset, + (unsigned long long)(offset + size - 1)); + + if (mmap_state == pci_mmap_mem) { + /* Hack alert ! + * + * Because X is lame and can fail starting if it gets an error trying + * to mmap legacy_mem (instead of just moving on without legacy memory + * access) we fake it here by giving it anonymous memory, effectively + * behaving just like /dev/zero + */ + if ((offset + size) > hose->isa_mem_size) { + printk(KERN_DEBUG + "Process %s (pid:%d) mapped non-existing PCI legacy memory for 0%04x:%02x\n", + current->comm, current->pid, pci_domain_nr(bus), bus->number); + if (vma->vm_flags & VM_SHARED) + return shmem_zero_setup(vma); + return 0; + } + offset += hose->isa_mem_phys; + } else { + unsigned long io_offset = (unsigned long)hose->io_base_virt - _IO_BASE; + unsigned long roffset = offset + io_offset; + rp = &hose->io_resource; + if (!(rp->flags & IORESOURCE_IO)) + return -ENXIO; + if (roffset < rp->start || (roffset + size) > rp->end) + return -ENXIO; + offset += hose->io_base_phys; + } + pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset); + + vma->vm_pgoff = offset >> PAGE_SHIFT; + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); +} + +void pci_resource_to_user(const struct pci_dev *dev, int bar, + const struct resource *rsrc, + resource_size_t *start, resource_size_t *end) +{ + struct pci_bus_region region; + + if (rsrc->flags & IORESOURCE_IO) { + pcibios_resource_to_bus(dev->bus, ®ion, + (struct resource *) rsrc); + *start = region.start; + *end = region.end; + return; + } + + /* We pass a CPU physical address to userland for MMIO instead of a + * BAR value because X is lame and expects to be able to use that + * to pass to /dev/mem! + * + * That means we may have 64-bit values where some apps only expect + * 32 (like X itself since it thinks only Sparc has 64-bit MMIO). + */ + *start = rsrc->start; + *end = rsrc->end; +} + +/** + * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree + * @hose: newly allocated pci_controller to be setup + * @dev: device node of the host bridge + * @primary: set if primary bus (32 bits only, soon to be deprecated) + * + * This function will parse the "ranges" property of a PCI host bridge device + * node and setup the resource mapping of a pci controller based on its + * content. + * + * Life would be boring if it wasn't for a few issues that we have to deal + * with here: + * + * - We can only cope with one IO space range and up to 3 Memory space + * ranges. However, some machines (thanks Apple !) tend to split their + * space into lots of small contiguous ranges. So we have to coalesce. + * + * - Some busses have IO space not starting at 0, which causes trouble with + * the way we do our IO resource renumbering. The code somewhat deals with + * it for 64 bits but I would expect problems on 32 bits. + * + * - Some 32 bits platforms such as 4xx can have physical space larger than + * 32 bits so we need to use 64 bits values for the parsing + */ +void pci_process_bridge_OF_ranges(struct pci_controller *hose, + struct device_node *dev, int primary) +{ + int memno = 0; + struct resource *res; + struct of_pci_range range; + struct of_pci_range_parser parser; + + printk(KERN_INFO "PCI host bridge %pOF %s ranges:\n", + dev, primary ? "(primary)" : ""); + + /* Check for ranges property */ + if (of_pci_range_parser_init(&parser, dev)) + return; + + /* Parse it */ + for_each_of_pci_range(&parser, &range) { + /* If we failed translation or got a zero-sized region + * (some FW try to feed us with non sensical zero sized regions + * such as power3 which look like some kind of attempt at exposing + * the VGA memory hole) + */ + if (range.cpu_addr == OF_BAD_ADDR || range.size == 0) + continue; + + /* Act based on address space type */ + res = NULL; + switch (range.flags & IORESOURCE_TYPE_BITS) { + case IORESOURCE_IO: + printk(KERN_INFO + " IO 0x%016llx..0x%016llx -> 0x%016llx\n", + range.cpu_addr, range.cpu_addr + range.size - 1, + range.pci_addr); + + /* We support only one IO range */ + if (hose->pci_io_size) { + printk(KERN_INFO + " \\--> Skipped (too many) !\n"); + continue; + } +#ifdef CONFIG_PPC32 + /* On 32 bits, limit I/O space to 16MB */ + if (range.size > 0x01000000) + range.size = 0x01000000; + + /* 32 bits needs to map IOs here */ + hose->io_base_virt = ioremap(range.cpu_addr, + range.size); + + /* Expect trouble if pci_addr is not 0 */ + if (primary) + isa_io_base = + (unsigned long)hose->io_base_virt; +#endif /* CONFIG_PPC32 */ + /* pci_io_size and io_base_phys always represent IO + * space starting at 0 so we factor in pci_addr + */ + hose->pci_io_size = range.pci_addr + range.size; + hose->io_base_phys = range.cpu_addr - range.pci_addr; + + /* Build resource */ + res = &hose->io_resource; + range.cpu_addr = range.pci_addr; + break; + case IORESOURCE_MEM: + printk(KERN_INFO + " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n", + range.cpu_addr, range.cpu_addr + range.size - 1, + range.pci_addr, + (range.flags & IORESOURCE_PREFETCH) ? + "Prefetch" : ""); + + /* We support only 3 memory ranges */ + if (memno >= 3) { + printk(KERN_INFO + " \\--> Skipped (too many) !\n"); + continue; + } + /* Handles ISA memory hole space here */ + if (range.pci_addr == 0) { + if (primary || isa_mem_base == 0) + isa_mem_base = range.cpu_addr; + hose->isa_mem_phys = range.cpu_addr; + hose->isa_mem_size = range.size; + } + + /* Build resource */ + hose->mem_offset[memno] = range.cpu_addr - + range.pci_addr; + res = &hose->mem_resources[memno++]; + break; + } + if (res != NULL) { + res->name = dev->full_name; + res->flags = range.flags; + res->start = range.cpu_addr; + res->end = range.cpu_addr + range.size - 1; + res->parent = res->child = res->sibling = NULL; + } + } +} + +/* Decide whether to display the domain number in /proc */ +int pci_proc_domain(struct pci_bus *bus) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + + if (!pci_has_flag(PCI_ENABLE_PROC_DOMAINS)) + return 0; + if (pci_has_flag(PCI_COMPAT_DOMAIN_0)) + return hose->global_number != 0; + return 1; +} + +int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge) +{ + if (ppc_md.pcibios_root_bridge_prepare) + return ppc_md.pcibios_root_bridge_prepare(bridge); + + return 0; +} + +/* This header fixup will do the resource fixup for all devices as they are + * probed, but not for bridge ranges + */ +static void pcibios_fixup_resources(struct pci_dev *dev) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + struct resource *res; + int i; + + if (!hose) { + printk(KERN_ERR "No host bridge for PCI dev %s !\n", + pci_name(dev)); + return; + } + + if (dev->is_virtfn) + return; + + pci_dev_for_each_resource(dev, res, i) { + struct pci_bus_region reg; + + if (!res->flags) + continue; + + /* If we're going to re-assign everything, we mark all resources + * as unset (and 0-base them). In addition, we mark BARs starting + * at 0 as unset as well, except if PCI_PROBE_ONLY is also set + * since in that case, we don't want to re-assign anything + */ + pcibios_resource_to_bus(dev->bus, ®, res); + if (pci_has_flag(PCI_REASSIGN_ALL_RSRC) || + (reg.start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) { + /* Only print message if not re-assigning */ + if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC)) + pr_debug("PCI:%s Resource %d %pR is unassigned\n", + pci_name(dev), i, res); + res->end -= res->start; + res->start = 0; + res->flags |= IORESOURCE_UNSET; + continue; + } + + pr_debug("PCI:%s Resource %d %pR\n", pci_name(dev), i, res); + } + + /* Call machine specific resource fixup */ + if (ppc_md.pcibios_fixup_resources) + ppc_md.pcibios_fixup_resources(dev); +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources); + +/* This function tries to figure out if a bridge resource has been initialized + * by the firmware or not. It doesn't have to be absolutely bullet proof, but + * things go more smoothly when it gets it right. It should covers cases such + * as Apple "closed" bridge resources and bare-metal pSeries unassigned bridges + */ +static int pcibios_uninitialized_bridge_resource(struct pci_bus *bus, + struct resource *res) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + struct pci_dev *dev = bus->self; + resource_size_t offset; + struct pci_bus_region region; + u16 command; + int i; + + /* We don't do anything if PCI_PROBE_ONLY is set */ + if (pci_has_flag(PCI_PROBE_ONLY)) + return 0; + + /* Job is a bit different between memory and IO */ + if (res->flags & IORESOURCE_MEM) { + pcibios_resource_to_bus(dev->bus, ®ion, res); + + /* If the BAR is non-0 then it's probably been initialized */ + if (region.start != 0) + return 0; + + /* The BAR is 0, let's check if memory decoding is enabled on + * the bridge. If not, we consider it unassigned + */ + pci_read_config_word(dev, PCI_COMMAND, &command); + if ((command & PCI_COMMAND_MEMORY) == 0) + return 1; + + /* Memory decoding is enabled and the BAR is 0. If any of the bridge + * resources covers that starting address (0 then it's good enough for + * us for memory space) + */ + for (i = 0; i < 3; i++) { + if ((hose->mem_resources[i].flags & IORESOURCE_MEM) && + hose->mem_resources[i].start == hose->mem_offset[i]) + return 0; + } + + /* Well, it starts at 0 and we know it will collide so we may as + * well consider it as unassigned. That covers the Apple case. + */ + return 1; + } else { + /* If the BAR is non-0, then we consider it assigned */ + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + if (((res->start - offset) & 0xfffffffful) != 0) + return 0; + + /* Here, we are a bit different than memory as typically IO space + * starting at low addresses -is- valid. What we do instead if that + * we consider as unassigned anything that doesn't have IO enabled + * in the PCI command register, and that's it. + */ + pci_read_config_word(dev, PCI_COMMAND, &command); + if (command & PCI_COMMAND_IO) + return 0; + + /* It's starting at 0 and IO is disabled in the bridge, consider + * it unassigned + */ + return 1; + } +} + +/* Fixup resources of a PCI<->PCI bridge */ +static void pcibios_fixup_bridge(struct pci_bus *bus) +{ + struct resource *res; + int i; + + struct pci_dev *dev = bus->self; + + pci_bus_for_each_resource(bus, res, i) { + if (!res || !res->flags) + continue; + if (i >= 3 && bus->self->transparent) + continue; + + /* If we're going to reassign everything, we can + * shrink the P2P resource to have size as being + * of 0 in order to save space. + */ + if (pci_has_flag(PCI_REASSIGN_ALL_RSRC)) { + res->flags |= IORESOURCE_UNSET; + res->start = 0; + res->end = -1; + continue; + } + + pr_debug("PCI:%s Bus rsrc %d %pR\n", pci_name(dev), i, res); + + /* Try to detect uninitialized P2P bridge resources, + * and clear them out so they get re-assigned later + */ + if (pcibios_uninitialized_bridge_resource(bus, res)) { + res->flags = 0; + pr_debug("PCI:%s (unassigned)\n", pci_name(dev)); + } + } +} + +void pcibios_setup_bus_self(struct pci_bus *bus) +{ + struct pci_controller *phb; + + /* Fix up the bus resources for P2P bridges */ + if (bus->self != NULL) + pcibios_fixup_bridge(bus); + + /* Platform specific bus fixups. This is currently only used + * by fsl_pci and I'm hoping to get rid of it at some point + */ + if (ppc_md.pcibios_fixup_bus) + ppc_md.pcibios_fixup_bus(bus); + + /* Setup bus DMA mappings */ + phb = pci_bus_to_host(bus); + if (phb->controller_ops.dma_bus_setup) + phb->controller_ops.dma_bus_setup(bus); +} + +void pcibios_bus_add_device(struct pci_dev *dev) +{ + struct pci_controller *phb; + /* Fixup NUMA node as it may not be setup yet by the generic + * code and is needed by the DMA init + */ + set_dev_node(&dev->dev, pcibus_to_node(dev->bus)); + + /* Hook up default DMA ops */ + set_dma_ops(&dev->dev, pci_dma_ops); + dev->dev.archdata.dma_offset = PCI_DRAM_OFFSET; + + /* Additional platform DMA/iommu setup */ + phb = pci_bus_to_host(dev->bus); + if (phb->controller_ops.dma_dev_setup) + phb->controller_ops.dma_dev_setup(dev); + + /* Read default IRQs and fixup if necessary */ + pci_read_irq_line(dev); + if (ppc_md.pci_irq_fixup) + ppc_md.pci_irq_fixup(dev); + + if (ppc_md.pcibios_bus_add_device) + ppc_md.pcibios_bus_add_device(dev); +} + +int pcibios_device_add(struct pci_dev *dev) +{ + struct irq_domain *d; + +#ifdef CONFIG_PCI_IOV + if (ppc_md.pcibios_fixup_sriov) + ppc_md.pcibios_fixup_sriov(dev); +#endif /* CONFIG_PCI_IOV */ + + d = dev_get_msi_domain(&dev->bus->dev); + if (d) + dev_set_msi_domain(&dev->dev, d); + return 0; +} + +void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} + +void pcibios_fixup_bus(struct pci_bus *bus) +{ + /* When called from the generic PCI probe, read PCI<->PCI bridge + * bases. This is -not- called when generating the PCI tree from + * the OF device-tree. + */ + pci_read_bridge_bases(bus); + + /* Now fixup the bus */ + pcibios_setup_bus_self(bus); +} +EXPORT_SYMBOL(pcibios_fixup_bus); + +static int skip_isa_ioresource_align(struct pci_dev *dev) +{ + if (pci_has_flag(PCI_CAN_SKIP_ISA_ALIGN) && + !(dev->bus->bridge_ctl & PCI_BRIDGE_CTL_ISA)) + return 1; + return 0; +} + +/* + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + * + * Why? Because some silly external IO cards only decode + * the low 10 bits of the IO address. The 0x00-0xff region + * is reserved for motherboard devices that decode all 16 + * bits, so it's ok to allocate at, say, 0x2800-0x28ff, + * but we want to try to avoid allocating at 0x2900-0x2bff + * which might have be mirrored at 0x0100-0x03ff.. + */ +resource_size_t pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) +{ + struct pci_dev *dev = data; + resource_size_t start = res->start; + + if (res->flags & IORESOURCE_IO) { + if (skip_isa_ioresource_align(dev)) + return start; + if (start & 0x300) + start = (start + 0x3ff) & ~0x3ff; + } + + return start; +} +EXPORT_SYMBOL(pcibios_align_resource); + +/* + * Reparent resource children of pr that conflict with res + * under res, and make res replace those children. + */ +static int reparent_resources(struct resource *parent, + struct resource *res) +{ + struct resource *p, **pp; + struct resource **firstpp = NULL; + + for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) { + if (p->end < res->start) + continue; + if (res->end < p->start) + break; + if (p->start < res->start || p->end > res->end) + return -1; /* not completely contained */ + if (firstpp == NULL) + firstpp = pp; + } + if (firstpp == NULL) + return -1; /* didn't find any conflicting entries? */ + res->parent = parent; + res->child = *firstpp; + res->sibling = *pp; + *firstpp = res; + *pp = NULL; + for (p = res->child; p != NULL; p = p->sibling) { + p->parent = res; + pr_debug("PCI: Reparented %s %pR under %s\n", + p->name, p, res->name); + } + return 0; +} + +/* + * Handle resources of PCI devices. If the world were perfect, we could + * just allocate all the resource regions and do nothing more. It isn't. + * On the other hand, we cannot just re-allocate all devices, as it would + * require us to know lots of host bridge internals. So we attempt to + * keep as much of the original configuration as possible, but tweak it + * when it's found to be wrong. + * + * Known BIOS problems we have to work around: + * - I/O or memory regions not configured + * - regions configured, but not enabled in the command register + * - bogus I/O addresses above 64K used + * - expansion ROMs left enabled (this may sound harmless, but given + * the fact the PCI specs explicitly allow address decoders to be + * shared between expansion ROMs and other resource regions, it's + * at least dangerous) + * + * Our solution: + * (1) Allocate resources for all buses behind PCI-to-PCI bridges. + * This gives us fixed barriers on where we can allocate. + * (2) Allocate resources for all enabled devices. If there is + * a collision, just mark the resource as unallocated. Also + * disable expansion ROMs during this step. + * (3) Try to allocate resources for disabled devices. If the + * resources were assigned correctly, everything goes well, + * if they weren't, they won't disturb allocation of other + * resources. + * (4) Assign new addresses to resources which were either + * not configured at all or misconfigured. If explicitly + * requested by the user, configure expansion ROM address + * as well. + */ + +static void pcibios_allocate_bus_resources(struct pci_bus *bus) +{ + struct pci_bus *b; + int i; + struct resource *res, *pr; + + pr_debug("PCI: Allocating bus resources for %04x:%02x...\n", + pci_domain_nr(bus), bus->number); + + pci_bus_for_each_resource(bus, res, i) { + if (!res || !res->flags || res->start > res->end || res->parent) + continue; + + /* If the resource was left unset at this point, we clear it */ + if (res->flags & IORESOURCE_UNSET) + goto clear_resource; + + if (bus->parent == NULL) + pr = (res->flags & IORESOURCE_IO) ? + &ioport_resource : &iomem_resource; + else { + pr = pci_find_parent_resource(bus->self, res); + if (pr == res) { + /* this happens when the generic PCI + * code (wrongly) decides that this + * bridge is transparent -- paulus + */ + continue; + } + } + + pr_debug("PCI: %s (bus %d) bridge rsrc %d: %pR, parent %p (%s)\n", + bus->self ? pci_name(bus->self) : "PHB", bus->number, + i, res, pr, (pr && pr->name) ? pr->name : "nil"); + + if (pr && !(pr->flags & IORESOURCE_UNSET)) { + struct pci_dev *dev = bus->self; + + if (request_resource(pr, res) == 0) + continue; + /* + * Must be a conflict with an existing entry. + * Move that entry (or entries) under the + * bridge resource and try again. + */ + if (reparent_resources(pr, res) == 0) + continue; + + if (dev && i < PCI_BRIDGE_RESOURCE_NUM && + pci_claim_bridge_resource(dev, + i + PCI_BRIDGE_RESOURCES) == 0) + continue; + } + pr_warn("PCI: Cannot allocate resource region %d of PCI bridge %d, will remap\n", + i, bus->number); + clear_resource: + /* The resource might be figured out when doing + * reassignment based on the resources required + * by the downstream PCI devices. Here we set + * the size of the resource to be 0 in order to + * save more space. + */ + res->start = 0; + res->end = -1; + res->flags = 0; + } + + list_for_each_entry(b, &bus->children, node) + pcibios_allocate_bus_resources(b); +} + +static inline void alloc_resource(struct pci_dev *dev, int idx) +{ + struct resource *pr, *r = &dev->resource[idx]; + + pr_debug("PCI: Allocating %s: Resource %d: %pR\n", + pci_name(dev), idx, r); + + pr = pci_find_parent_resource(dev, r); + if (!pr || (pr->flags & IORESOURCE_UNSET) || + request_resource(pr, r) < 0) { + printk(KERN_WARNING "PCI: Cannot allocate resource region %d" + " of device %s, will remap\n", idx, pci_name(dev)); + if (pr) + pr_debug("PCI: parent is %p: %pR\n", pr, pr); + /* We'll assign a new address later */ + r->flags |= IORESOURCE_UNSET; + r->end -= r->start; + r->start = 0; + } +} + +static void __init pcibios_allocate_resources(int pass) +{ + struct pci_dev *dev = NULL; + int idx, disabled; + u16 command; + struct resource *r; + + for_each_pci_dev(dev) { + pci_read_config_word(dev, PCI_COMMAND, &command); + for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) { + r = &dev->resource[idx]; + if (r->parent) /* Already allocated */ + continue; + if (!r->flags || (r->flags & IORESOURCE_UNSET)) + continue; /* Not assigned at all */ + /* We only allocate ROMs on pass 1 just in case they + * have been screwed up by firmware + */ + if (idx == PCI_ROM_RESOURCE ) + disabled = 1; + if (r->flags & IORESOURCE_IO) + disabled = !(command & PCI_COMMAND_IO); + else + disabled = !(command & PCI_COMMAND_MEMORY); + if (pass == disabled) + alloc_resource(dev, idx); + } + if (pass) + continue; + r = &dev->resource[PCI_ROM_RESOURCE]; + if (r->flags) { + /* Turn the ROM off, leave the resource region, + * but keep it unregistered. + */ + u32 reg; + pci_read_config_dword(dev, dev->rom_base_reg, ®); + if (reg & PCI_ROM_ADDRESS_ENABLE) { + pr_debug("PCI: Switching off ROM of %s\n", + pci_name(dev)); + r->flags &= ~IORESOURCE_ROM_ENABLE; + pci_write_config_dword(dev, dev->rom_base_reg, + reg & ~PCI_ROM_ADDRESS_ENABLE); + } + } + } +} + +static void __init pcibios_reserve_legacy_regions(struct pci_bus *bus) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + resource_size_t offset; + struct resource *res, *pres; + int i; + + pr_debug("Reserving legacy ranges for domain %04x\n", pci_domain_nr(bus)); + + /* Check for IO */ + if (!(hose->io_resource.flags & IORESOURCE_IO)) + goto no_io; + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + res = kzalloc(sizeof(struct resource), GFP_KERNEL); + BUG_ON(res == NULL); + res->name = "Legacy IO"; + res->flags = IORESOURCE_IO; + res->start = offset; + res->end = (offset + 0xfff) & 0xfffffffful; + pr_debug("Candidate legacy IO: %pR\n", res); + if (request_resource(&hose->io_resource, res)) { + printk(KERN_DEBUG + "PCI %04x:%02x Cannot reserve Legacy IO %pR\n", + pci_domain_nr(bus), bus->number, res); + kfree(res); + } + + no_io: + /* Check for memory */ + for (i = 0; i < 3; i++) { + pres = &hose->mem_resources[i]; + offset = hose->mem_offset[i]; + if (!(pres->flags & IORESOURCE_MEM)) + continue; + pr_debug("hose mem res: %pR\n", pres); + if ((pres->start - offset) <= 0xa0000 && + (pres->end - offset) >= 0xbffff) + break; + } + if (i >= 3) + return; + res = kzalloc(sizeof(struct resource), GFP_KERNEL); + BUG_ON(res == NULL); + res->name = "Legacy VGA memory"; + res->flags = IORESOURCE_MEM; + res->start = 0xa0000 + offset; + res->end = 0xbffff + offset; + pr_debug("Candidate VGA memory: %pR\n", res); + if (request_resource(pres, res)) { + printk(KERN_DEBUG + "PCI %04x:%02x Cannot reserve VGA memory %pR\n", + pci_domain_nr(bus), bus->number, res); + kfree(res); + } +} + +void __init pcibios_resource_survey(void) +{ + struct pci_bus *b; + + /* Allocate and assign resources */ + list_for_each_entry(b, &pci_root_buses, node) + pcibios_allocate_bus_resources(b); + if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC)) { + pcibios_allocate_resources(0); + pcibios_allocate_resources(1); + } + + /* Before we start assigning unassigned resource, we try to reserve + * the low IO area and the VGA memory area if they intersect the + * bus available resources to avoid allocating things on top of them + */ + if (!pci_has_flag(PCI_PROBE_ONLY)) { + list_for_each_entry(b, &pci_root_buses, node) + pcibios_reserve_legacy_regions(b); + } + + /* Now, if the platform didn't decide to blindly trust the firmware, + * we proceed to assigning things that were left unassigned + */ + if (!pci_has_flag(PCI_PROBE_ONLY)) { + pr_debug("PCI: Assigning unassigned resources...\n"); + pci_assign_unassigned_resources(); + } +} + +/* This is used by the PCI hotplug driver to allocate resource + * of newly plugged busses. We can try to consolidate with the + * rest of the code later, for now, keep it as-is as our main + * resource allocation function doesn't deal with sub-trees yet. + */ +void pcibios_claim_one_bus(struct pci_bus *bus) +{ + struct pci_dev *dev; + struct pci_bus *child_bus; + + list_for_each_entry(dev, &bus->devices, bus_list) { + struct resource *r; + int i; + + pci_dev_for_each_resource(dev, r, i) { + if (r->parent || !r->start || !r->flags) + continue; + + pr_debug("PCI: Claiming %s: Resource %d: %pR\n", + pci_name(dev), i, r); + + if (pci_claim_resource(dev, i) == 0) + continue; + + pci_claim_bridge_resource(dev, i); + } + } + + list_for_each_entry(child_bus, &bus->children, node) + pcibios_claim_one_bus(child_bus); +} +EXPORT_SYMBOL_GPL(pcibios_claim_one_bus); + + +/* pcibios_finish_adding_to_bus + * + * This is to be called by the hotplug code after devices have been + * added to a bus, this include calling it for a PHB that is just + * being added + */ +void pcibios_finish_adding_to_bus(struct pci_bus *bus) +{ + pr_debug("PCI: Finishing adding to hotplug bus %04x:%02x\n", + pci_domain_nr(bus), bus->number); + + /* Allocate bus and devices resources */ + pcibios_allocate_bus_resources(bus); + pcibios_claim_one_bus(bus); + if (!pci_has_flag(PCI_PROBE_ONLY)) { + if (bus->self) + pci_assign_unassigned_bridge_resources(bus->self); + else + pci_assign_unassigned_bus_resources(bus); + } + + /* Add new devices to global lists. Register in proc, sysfs. */ + pci_bus_add_devices(bus); +} +EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus); + +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + struct pci_controller *phb = pci_bus_to_host(dev->bus); + + if (phb->controller_ops.enable_device_hook) + if (!phb->controller_ops.enable_device_hook(dev)) + return -EINVAL; + + return pci_enable_resources(dev, mask); +} + +void pcibios_disable_device(struct pci_dev *dev) +{ + struct pci_controller *phb = pci_bus_to_host(dev->bus); + + if (phb->controller_ops.disable_device) + phb->controller_ops.disable_device(dev); +} + +resource_size_t pcibios_io_space_offset(struct pci_controller *hose) +{ + return (unsigned long) hose->io_base_virt - _IO_BASE; +} + +static void pcibios_setup_phb_resources(struct pci_controller *hose, + struct list_head *resources) +{ + struct resource *res; + resource_size_t offset; + int i; + + /* Hookup PHB IO resource */ + res = &hose->io_resource; + + if (!res->flags) { + pr_debug("PCI: I/O resource not set for host" + " bridge %pOF (domain %d)\n", + hose->dn, hose->global_number); + } else { + offset = pcibios_io_space_offset(hose); + + pr_debug("PCI: PHB IO resource = %pR off 0x%08llx\n", + res, (unsigned long long)offset); + pci_add_resource_offset(resources, res, offset); + } + + /* Hookup PHB Memory resources */ + for (i = 0; i < 3; ++i) { + res = &hose->mem_resources[i]; + if (!res->flags) + continue; + + offset = hose->mem_offset[i]; + pr_debug("PCI: PHB MEM resource %d = %pR off 0x%08llx\n", i, + res, (unsigned long long)offset); + + pci_add_resource_offset(resources, res, offset); + } +} + +/* + * Null PCI config access functions, for the case when we can't + * find a hose. + */ +#define NULL_PCI_OP(rw, size, type) \ +static int \ +null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \ +{ \ + return PCIBIOS_DEVICE_NOT_FOUND; \ +} + +static int +null_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static int +null_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static struct pci_ops null_pci_ops = +{ + .read = null_read_config, + .write = null_write_config, +}; + +/* + * These functions are used early on before PCI scanning is done + * and all of the pci_dev and pci_bus structures have been created. + */ +static struct pci_bus * +fake_pci_bus(struct pci_controller *hose, int busnr) +{ + static struct pci_bus bus; + + if (hose == NULL) { + printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr); + } + bus.number = busnr; + bus.sysdata = hose; + bus.ops = hose? hose->ops: &null_pci_ops; + return &bus; +} + +#define EARLY_PCI_OP(rw, size, type) \ +int early_##rw##_config_##size(struct pci_controller *hose, int bus, \ + int devfn, int offset, type value) \ +{ \ + return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \ + devfn, offset, value); \ +} + +EARLY_PCI_OP(read, byte, u8 *) +EARLY_PCI_OP(read, word, u16 *) +EARLY_PCI_OP(read, dword, u32 *) +EARLY_PCI_OP(write, byte, u8) +EARLY_PCI_OP(write, word, u16) +EARLY_PCI_OP(write, dword, u32) + +int early_find_capability(struct pci_controller *hose, int bus, int devfn, + int cap) +{ + return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap); +} + +struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus) +{ + struct pci_controller *hose = bus->sysdata; + + return of_node_get(hose->dn); +} + +/** + * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus + * @hose: Pointer to the PCI host controller instance structure + */ +void pcibios_scan_phb(struct pci_controller *hose) +{ + LIST_HEAD(resources); + struct pci_bus *bus; + struct device_node *node = hose->dn; + int mode; + + pr_debug("PCI: Scanning PHB %pOF\n", node); + + /* Get some IO space for the new PHB */ + pcibios_setup_phb_io_space(hose); + + /* Wire up PHB bus resources */ + pcibios_setup_phb_resources(hose, &resources); + + hose->busn.start = hose->first_busno; + hose->busn.end = hose->last_busno; + hose->busn.flags = IORESOURCE_BUS; + pci_add_resource(&resources, &hose->busn); + + /* Create an empty bus for the toplevel */ + bus = pci_create_root_bus(hose->parent, hose->first_busno, + hose->ops, hose, &resources); + if (bus == NULL) { + pr_err("Failed to create bus for PCI domain %04x\n", + hose->global_number); + pci_free_resource_list(&resources); + return; + } + hose->bus = bus; + + /* Get probe mode and perform scan */ + mode = PCI_PROBE_NORMAL; + if (node && hose->controller_ops.probe_mode) + mode = hose->controller_ops.probe_mode(bus); + pr_debug(" probe mode: %d\n", mode); + if (mode == PCI_PROBE_DEVTREE) + of_scan_bus(node, bus); + + if (mode == PCI_PROBE_NORMAL) { + pci_bus_update_busn_res_end(bus, 255); + hose->last_busno = pci_scan_child_bus(bus); + pci_bus_update_busn_res_end(bus, hose->last_busno); + } + + /* Platform gets a chance to do some global fixups before + * we proceed to resource allocation + */ + if (ppc_md.pcibios_fixup_phb) + ppc_md.pcibios_fixup_phb(hose); + + /* Configure PCI Express settings */ + if (bus && !pci_has_flag(PCI_PROBE_ONLY)) { + struct pci_bus *child; + list_for_each_entry(child, &bus->children, node) + pcie_bus_configure_settings(child); + } +} +EXPORT_SYMBOL_GPL(pcibios_scan_phb); + +static void fixup_hide_host_resource_fsl(struct pci_dev *dev) +{ + int class = dev->class >> 8; + /* When configured as agent, programming interface = 1 */ + int prog_if = dev->class & 0xf; + struct resource *r; + + if ((class == PCI_CLASS_PROCESSOR_POWERPC || + class == PCI_CLASS_BRIDGE_OTHER) && + (dev->hdr_type == PCI_HEADER_TYPE_NORMAL) && + (prog_if == 0) && + (dev->bus->parent == NULL)) { + pci_dev_for_each_resource(dev, r) { + r->start = 0; + r->end = 0; + r->flags = 0; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl); + + +static int __init discover_phbs(void) +{ + if (ppc_md.discover_phbs) + ppc_md.discover_phbs(); + + return 0; +} +core_initcall(discover_phbs); |