diff options
Diffstat (limited to 'arch/powerpc/mm/nohash/e500.c')
-rw-r--r-- | arch/powerpc/mm/nohash/e500.c | 375 |
1 files changed, 375 insertions, 0 deletions
diff --git a/arch/powerpc/mm/nohash/e500.c b/arch/powerpc/mm/nohash/e500.c new file mode 100644 index 0000000000..40a4e69ae1 --- /dev/null +++ b/arch/powerpc/mm/nohash/e500.c @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Modifications by Kumar Gala (galak@kernel.crashing.org) to support + * E500 Book E processors. + * + * Copyright 2004,2010 Freescale Semiconductor, Inc. + * + * This file contains the routines for initializing the MMU + * on the 4xx series of chips. + * -- paulus + * + * Derived from arch/ppc/mm/init.c: + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) + * and Cort Dougan (PReP) (cort@cs.nmt.edu) + * Copyright (C) 1996 Paul Mackerras + * + * Derived from "arch/i386/mm/init.c" + * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds + */ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/swap.h> +#include <linux/stddef.h> +#include <linux/vmalloc.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/highmem.h> +#include <linux/memblock.h> +#include <linux/of_fdt.h> + +#include <asm/io.h> +#include <asm/mmu_context.h> +#include <asm/mmu.h> +#include <linux/uaccess.h> +#include <asm/smp.h> +#include <asm/machdep.h> +#include <asm/setup.h> +#include <asm/paca.h> + +#include <mm/mmu_decl.h> + +unsigned int tlbcam_index; + +struct tlbcam TLBCAM[NUM_TLBCAMS]; + +static struct { + unsigned long start; + unsigned long limit; + phys_addr_t phys; +} tlbcam_addrs[NUM_TLBCAMS]; + +#ifdef CONFIG_PPC_85xx +/* + * Return PA for this VA if it is mapped by a CAM, or 0 + */ +phys_addr_t v_block_mapped(unsigned long va) +{ + int b; + for (b = 0; b < tlbcam_index; ++b) + if (va >= tlbcam_addrs[b].start && va < tlbcam_addrs[b].limit) + return tlbcam_addrs[b].phys + (va - tlbcam_addrs[b].start); + return 0; +} + +/* + * Return VA for a given PA or 0 if not mapped + */ +unsigned long p_block_mapped(phys_addr_t pa) +{ + int b; + for (b = 0; b < tlbcam_index; ++b) + if (pa >= tlbcam_addrs[b].phys + && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start) + +tlbcam_addrs[b].phys) + return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys); + return 0; +} +#endif + +/* + * Set up a variable-size TLB entry (tlbcam). The parameters are not checked; + * in particular size must be a power of 4 between 4k and the max supported by + * an implementation; max may further be limited by what can be represented in + * an unsigned long (for example, 32-bit implementations cannot support a 4GB + * size). + */ +static void settlbcam(int index, unsigned long virt, phys_addr_t phys, + unsigned long size, unsigned long flags, unsigned int pid) +{ + unsigned int tsize; + + tsize = __ilog2(size) - 10; + +#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC) + if ((flags & _PAGE_NO_CACHE) == 0) + flags |= _PAGE_COHERENT; +#endif + + TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index) | MAS0_NV(index+1); + TLBCAM[index].MAS1 = MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(tsize) | MAS1_TID(pid); + TLBCAM[index].MAS2 = virt & PAGE_MASK; + + TLBCAM[index].MAS2 |= (flags & _PAGE_WRITETHRU) ? MAS2_W : 0; + TLBCAM[index].MAS2 |= (flags & _PAGE_NO_CACHE) ? MAS2_I : 0; + TLBCAM[index].MAS2 |= (flags & _PAGE_COHERENT) ? MAS2_M : 0; + TLBCAM[index].MAS2 |= (flags & _PAGE_GUARDED) ? MAS2_G : 0; + TLBCAM[index].MAS2 |= (flags & _PAGE_ENDIAN) ? MAS2_E : 0; + + TLBCAM[index].MAS3 = (phys & MAS3_RPN) | MAS3_SR; + TLBCAM[index].MAS3 |= (flags & _PAGE_RW) ? MAS3_SW : 0; + if (mmu_has_feature(MMU_FTR_BIG_PHYS)) + TLBCAM[index].MAS7 = (u64)phys >> 32; + + /* Below is unlikely -- only for large user pages or similar */ + if (pte_user(__pte(flags))) { + TLBCAM[index].MAS3 |= MAS3_UR; + TLBCAM[index].MAS3 |= (flags & _PAGE_EXEC) ? MAS3_UX : 0; + TLBCAM[index].MAS3 |= (flags & _PAGE_RW) ? MAS3_UW : 0; + } else { + TLBCAM[index].MAS3 |= (flags & _PAGE_EXEC) ? MAS3_SX : 0; + } + + tlbcam_addrs[index].start = virt; + tlbcam_addrs[index].limit = virt + size - 1; + tlbcam_addrs[index].phys = phys; +} + +static unsigned long calc_cam_sz(unsigned long ram, unsigned long virt, + phys_addr_t phys) +{ + unsigned int camsize = __ilog2(ram); + unsigned int align = __ffs(virt | phys); + unsigned long max_cam; + + if ((mfspr(SPRN_MMUCFG) & MMUCFG_MAVN) == MMUCFG_MAVN_V1) { + /* Convert (4^max) kB to (2^max) bytes */ + max_cam = ((mfspr(SPRN_TLB1CFG) >> 16) & 0xf) * 2 + 10; + camsize &= ~1U; + align &= ~1U; + } else { + /* Convert (2^max) kB to (2^max) bytes */ + max_cam = __ilog2(mfspr(SPRN_TLB1PS)) + 10; + } + + if (camsize > align) + camsize = align; + if (camsize > max_cam) + camsize = max_cam; + + return 1UL << camsize; +} + +static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt, + unsigned long ram, int max_cam_idx, + bool dryrun, bool init) +{ + int i; + unsigned long amount_mapped = 0; + unsigned long boundary; + + if (strict_kernel_rwx_enabled()) + boundary = (unsigned long)(_sinittext - _stext); + else + boundary = ram; + + /* Calculate CAM values */ + for (i = 0; boundary && i < max_cam_idx; i++) { + unsigned long cam_sz; + pgprot_t prot = init ? PAGE_KERNEL_X : PAGE_KERNEL_ROX; + + cam_sz = calc_cam_sz(boundary, virt, phys); + if (!dryrun) + settlbcam(i, virt, phys, cam_sz, pgprot_val(prot), 0); + + boundary -= cam_sz; + amount_mapped += cam_sz; + virt += cam_sz; + phys += cam_sz; + } + for (ram -= amount_mapped; ram && i < max_cam_idx; i++) { + unsigned long cam_sz; + pgprot_t prot = init ? PAGE_KERNEL_X : PAGE_KERNEL; + + cam_sz = calc_cam_sz(ram, virt, phys); + if (!dryrun) + settlbcam(i, virt, phys, cam_sz, pgprot_val(prot), 0); + + ram -= cam_sz; + amount_mapped += cam_sz; + virt += cam_sz; + phys += cam_sz; + } + + if (dryrun) + return amount_mapped; + + if (init) { + loadcam_multi(0, i, max_cam_idx); + tlbcam_index = i; + } else { + loadcam_multi(0, i, 0); + WARN_ON(i > tlbcam_index); + } + +#ifdef CONFIG_PPC64 + get_paca()->tcd.esel_next = i; + get_paca()->tcd.esel_max = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY; + get_paca()->tcd.esel_first = i; +#endif + + return amount_mapped; +} + +unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx, bool dryrun, bool init) +{ + unsigned long virt = PAGE_OFFSET; + phys_addr_t phys = memstart_addr; + + return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx, dryrun, init); +} + +#ifdef CONFIG_PPC32 + +#if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS) +#error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS" +#endif + +unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top) +{ + return tlbcam_addrs[tlbcam_index - 1].limit - PAGE_OFFSET + 1; +} + +void flush_instruction_cache(void) +{ + unsigned long tmp; + + tmp = mfspr(SPRN_L1CSR1); + tmp |= L1CSR1_ICFI | L1CSR1_ICLFR; + mtspr(SPRN_L1CSR1, tmp); + isync(); +} + +/* + * MMU_init_hw does the chip-specific initialization of the MMU hardware. + */ +void __init MMU_init_hw(void) +{ + flush_instruction_cache(); +} + +static unsigned long __init tlbcam_sz(int idx) +{ + return tlbcam_addrs[idx].limit - tlbcam_addrs[idx].start + 1; +} + +void __init adjust_total_lowmem(void) +{ + unsigned long ram; + int i; + + /* adjust lowmem size to __max_low_memory */ + ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem); + + i = switch_to_as1(); + __max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM, false, true); + restore_to_as0(i, 0, NULL, 1); + + pr_info("Memory CAM mapping: "); + for (i = 0; i < tlbcam_index - 1; i++) + pr_cont("%lu/", tlbcam_sz(i) >> 20); + pr_cont("%lu Mb, residual: %dMb\n", tlbcam_sz(tlbcam_index - 1) >> 20, + (unsigned int)((total_lowmem - __max_low_memory) >> 20)); + + memblock_set_current_limit(memstart_addr + __max_low_memory); +} + +#ifdef CONFIG_STRICT_KERNEL_RWX +void mmu_mark_rodata_ro(void) +{ + unsigned long remapped; + + remapped = map_mem_in_cams(__max_low_memory, CONFIG_LOWMEM_CAM_NUM, false, false); + + WARN_ON(__max_low_memory != remapped); +} +#endif + +void mmu_mark_initmem_nx(void) +{ + /* Everything is done in mmu_mark_rodata_ro() */ +} + +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + phys_addr_t limit = first_memblock_base + first_memblock_size; + + /* 64M mapped initially according to head_fsl_booke.S */ + memblock_set_current_limit(min_t(u64, limit, 0x04000000)); +} + +#ifdef CONFIG_RELOCATABLE +int __initdata is_second_reloc; +notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start) +{ + unsigned long base = kernstart_virt_addr; + phys_addr_t size; + + kernstart_addr = start; + if (is_second_reloc) { + virt_phys_offset = PAGE_OFFSET - memstart_addr; + kaslr_late_init(); + return; + } + + /* + * Relocatable kernel support based on processing of dynamic + * relocation entries. Before we get the real memstart_addr, + * We will compute the virt_phys_offset like this: + * virt_phys_offset = stext.run - kernstart_addr + * + * stext.run = (KERNELBASE & ~0x3ffffff) + + * (kernstart_addr & 0x3ffffff) + * When we relocate, we have : + * + * (kernstart_addr & 0x3ffffff) = (stext.run & 0x3ffffff) + * + * hence: + * virt_phys_offset = (KERNELBASE & ~0x3ffffff) - + * (kernstart_addr & ~0x3ffffff) + * + */ + start &= ~0x3ffffff; + base &= ~0x3ffffff; + virt_phys_offset = base - start; + early_get_first_memblock_info(__va(dt_ptr), &size); + /* + * We now get the memstart_addr, then we should check if this + * address is the same as what the PAGE_OFFSET map to now. If + * not we have to change the map of PAGE_OFFSET to memstart_addr + * and do a second relocation. + */ + if (start != memstart_addr) { + int n; + long offset = start - memstart_addr; + + is_second_reloc = 1; + n = switch_to_as1(); + /* map a 64M area for the second relocation */ + if (memstart_addr > start) + map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM, + false, true); + else + map_mem_in_cams_addr(start, PAGE_OFFSET + offset, + 0x4000000, CONFIG_LOWMEM_CAM_NUM, + false, true); + restore_to_as0(n, offset, __va(dt_ptr), 1); + /* We should never reach here */ + panic("Relocation error"); + } + + kaslr_early_init(__va(dt_ptr), size); +} +#endif +#endif |