summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/mm/nohash
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/mm/nohash')
-rw-r--r--arch/powerpc/mm/nohash/40x.c156
-rw-r--r--arch/powerpc/mm/nohash/44x.c242
-rw-r--r--arch/powerpc/mm/nohash/8xx.c211
-rw-r--r--arch/powerpc/mm/nohash/Makefile19
-rw-r--r--arch/powerpc/mm/nohash/book3e_pgtable.c132
-rw-r--r--arch/powerpc/mm/nohash/e500.c375
-rw-r--r--arch/powerpc/mm/nohash/e500_hugetlbpage.c194
-rw-r--r--arch/powerpc/mm/nohash/kaslr_booke.c395
-rw-r--r--arch/powerpc/mm/nohash/kup.c29
-rw-r--r--arch/powerpc/mm/nohash/mmu_context.c425
-rw-r--r--arch/powerpc/mm/nohash/tlb.c744
-rw-r--r--arch/powerpc/mm/nohash/tlb_low.S472
-rw-r--r--arch/powerpc/mm/nohash/tlb_low_64e.S1169
13 files changed, 4563 insertions, 0 deletions
diff --git a/arch/powerpc/mm/nohash/40x.c b/arch/powerpc/mm/nohash/40x.c
new file mode 100644
index 0000000000..3684d6e570
--- /dev/null
+++ b/arch/powerpc/mm/nohash/40x.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * This file contains the routines for initializing the MMU
+ * on the 4xx series of chips.
+ * -- paulus
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/memblock.h>
+
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/mmu.h>
+#include <linux/uaccess.h>
+#include <asm/smp.h>
+#include <asm/bootx.h>
+#include <asm/machdep.h>
+#include <asm/setup.h>
+
+#include <mm/mmu_decl.h>
+
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+void __init MMU_init_hw(void)
+{
+ /*
+ * The Zone Protection Register (ZPR) defines how protection will
+ * be applied to every page which is a member of a given zone. At
+ * present, we utilize only two of the 4xx's zones.
+ * The zone index bits (of ZSEL) in the PTE are used for software
+ * indicators, except the LSB. For user access, zone 1 is used,
+ * for kernel access, zone 0 is used. We set all but zone 1
+ * to zero, allowing only kernel access as indicated in the PTE.
+ * For zone 1, we set a 01 binary (a value of 10 will not work)
+ * to allow user access as indicated in the PTE. This also allows
+ * kernel access as indicated in the PTE.
+ */
+
+ mtspr(SPRN_ZPR, 0x10000000);
+
+ flush_instruction_cache();
+
+ /*
+ * Set up the real-mode cache parameters for the exception vector
+ * handlers (which are run in real-mode).
+ */
+
+ mtspr(SPRN_DCWR, 0x00000000); /* All caching is write-back */
+
+ /*
+ * Cache instruction and data space where the exception
+ * vectors and the kernel live in real-mode.
+ */
+
+ mtspr(SPRN_DCCR, 0xFFFF0000); /* 2GByte of data space at 0x0. */
+ mtspr(SPRN_ICCR, 0xFFFF0000); /* 2GByte of instr. space at 0x0. */
+}
+
+#define LARGE_PAGE_SIZE_16M (1<<24)
+#define LARGE_PAGE_SIZE_4M (1<<22)
+
+unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top)
+{
+ unsigned long v, s, mapped;
+ phys_addr_t p;
+
+ v = KERNELBASE;
+ p = 0;
+ s = total_lowmem;
+
+ if (IS_ENABLED(CONFIG_KFENCE))
+ return 0;
+
+ if (debug_pagealloc_enabled())
+ return 0;
+
+ if (strict_kernel_rwx_enabled())
+ return 0;
+
+ while (s >= LARGE_PAGE_SIZE_16M) {
+ pmd_t *pmdp;
+ unsigned long val = p | _PMD_SIZE_16M | _PAGE_EXEC | _PAGE_RW;
+
+ pmdp = pmd_off_k(v);
+ *pmdp++ = __pmd(val);
+ *pmdp++ = __pmd(val);
+ *pmdp++ = __pmd(val);
+ *pmdp++ = __pmd(val);
+
+ v += LARGE_PAGE_SIZE_16M;
+ p += LARGE_PAGE_SIZE_16M;
+ s -= LARGE_PAGE_SIZE_16M;
+ }
+
+ while (s >= LARGE_PAGE_SIZE_4M) {
+ pmd_t *pmdp;
+ unsigned long val = p | _PMD_SIZE_4M | _PAGE_EXEC | _PAGE_RW;
+
+ pmdp = pmd_off_k(v);
+ *pmdp = __pmd(val);
+
+ v += LARGE_PAGE_SIZE_4M;
+ p += LARGE_PAGE_SIZE_4M;
+ s -= LARGE_PAGE_SIZE_4M;
+ }
+
+ mapped = total_lowmem - s;
+
+ /* If the size of RAM is not an exact power of two, we may not
+ * have covered RAM in its entirety with 16 and 4 MiB
+ * pages. Consequently, restrict the top end of RAM currently
+ * allocable so that calls to the MEMBLOCK to allocate PTEs for "tail"
+ * coverage with normal-sized pages (or other reasons) do not
+ * attempt to allocate outside the allowed range.
+ */
+ memblock_set_current_limit(mapped);
+
+ return mapped;
+}
+
+void setup_initial_memory_limit(phys_addr_t first_memblock_base,
+ phys_addr_t first_memblock_size)
+{
+ /* We don't currently support the first MEMBLOCK not mapping 0
+ * physical on those processors
+ */
+ BUG_ON(first_memblock_base != 0);
+
+ /* 40x can only access 16MB at the moment (see head_40x.S) */
+ memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000));
+}
diff --git a/arch/powerpc/mm/nohash/44x.c b/arch/powerpc/mm/nohash/44x.c
new file mode 100644
index 0000000000..1beae802bb
--- /dev/null
+++ b/arch/powerpc/mm/nohash/44x.c
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Modifications by Matt Porter (mporter@mvista.com) to support
+ * PPC44x Book E processors.
+ *
+ * This file contains the routines for initializing the MMU
+ * on the 4xx series of chips.
+ * -- paulus
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ */
+
+#include <linux/init.h>
+#include <linux/memblock.h>
+
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <asm/cacheflush.h>
+#include <asm/code-patching.h>
+#include <asm/smp.h>
+
+#include <mm/mmu_decl.h>
+
+/* Used by the 44x TLB replacement exception handler.
+ * Just needed it declared someplace.
+ */
+unsigned int tlb_44x_index; /* = 0 */
+unsigned int tlb_44x_hwater = PPC44x_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
+int icache_44x_need_flush;
+
+unsigned long tlb_47x_boltmap[1024/8];
+
+static void __init ppc44x_update_tlb_hwater(void)
+{
+ /* The TLB miss handlers hard codes the watermark in a cmpli
+ * instruction to improve performances rather than loading it
+ * from the global variable. Thus, we patch the instructions
+ * in the 2 TLB miss handlers when updating the value
+ */
+ modify_instruction_site(&patch__tlb_44x_hwater_D, 0xffff, tlb_44x_hwater);
+ modify_instruction_site(&patch__tlb_44x_hwater_I, 0xffff, tlb_44x_hwater);
+}
+
+/*
+ * "Pins" a 256MB TLB entry in AS0 for kernel lowmem for 44x type MMU
+ */
+static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
+{
+ unsigned int entry = tlb_44x_hwater--;
+
+ ppc44x_update_tlb_hwater();
+
+ mtspr(SPRN_MMUCR, 0);
+
+ __asm__ __volatile__(
+ "tlbwe %2,%3,%4\n"
+ "tlbwe %1,%3,%5\n"
+ "tlbwe %0,%3,%6\n"
+ :
+ : "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
+ "r" (phys),
+ "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
+ "r" (entry),
+ "i" (PPC44x_TLB_PAGEID),
+ "i" (PPC44x_TLB_XLAT),
+ "i" (PPC44x_TLB_ATTRIB));
+}
+
+static int __init ppc47x_find_free_bolted(void)
+{
+ unsigned int mmube0 = mfspr(SPRN_MMUBE0);
+ unsigned int mmube1 = mfspr(SPRN_MMUBE1);
+
+ if (!(mmube0 & MMUBE0_VBE0))
+ return 0;
+ if (!(mmube0 & MMUBE0_VBE1))
+ return 1;
+ if (!(mmube0 & MMUBE0_VBE2))
+ return 2;
+ if (!(mmube1 & MMUBE1_VBE3))
+ return 3;
+ if (!(mmube1 & MMUBE1_VBE4))
+ return 4;
+ if (!(mmube1 & MMUBE1_VBE5))
+ return 5;
+ return -1;
+}
+
+static void __init ppc47x_update_boltmap(void)
+{
+ unsigned int mmube0 = mfspr(SPRN_MMUBE0);
+ unsigned int mmube1 = mfspr(SPRN_MMUBE1);
+
+ if (mmube0 & MMUBE0_VBE0)
+ __set_bit((mmube0 >> MMUBE0_IBE0_SHIFT) & 0xff,
+ tlb_47x_boltmap);
+ if (mmube0 & MMUBE0_VBE1)
+ __set_bit((mmube0 >> MMUBE0_IBE1_SHIFT) & 0xff,
+ tlb_47x_boltmap);
+ if (mmube0 & MMUBE0_VBE2)
+ __set_bit((mmube0 >> MMUBE0_IBE2_SHIFT) & 0xff,
+ tlb_47x_boltmap);
+ if (mmube1 & MMUBE1_VBE3)
+ __set_bit((mmube1 >> MMUBE1_IBE3_SHIFT) & 0xff,
+ tlb_47x_boltmap);
+ if (mmube1 & MMUBE1_VBE4)
+ __set_bit((mmube1 >> MMUBE1_IBE4_SHIFT) & 0xff,
+ tlb_47x_boltmap);
+ if (mmube1 & MMUBE1_VBE5)
+ __set_bit((mmube1 >> MMUBE1_IBE5_SHIFT) & 0xff,
+ tlb_47x_boltmap);
+}
+
+/*
+ * "Pins" a 256MB TLB entry in AS0 for kernel lowmem for 47x type MMU
+ */
+static void __init ppc47x_pin_tlb(unsigned int virt, unsigned int phys)
+{
+ unsigned int rA;
+ int bolted;
+
+ /* Base rA is HW way select, way 0, bolted bit set */
+ rA = 0x88000000;
+
+ /* Look for a bolted entry slot */
+ bolted = ppc47x_find_free_bolted();
+ BUG_ON(bolted < 0);
+
+ /* Insert bolted slot number */
+ rA |= bolted << 24;
+
+ pr_debug("256M TLB entry for 0x%08x->0x%08x in bolt slot %d\n",
+ virt, phys, bolted);
+
+ mtspr(SPRN_MMUCR, 0);
+
+ __asm__ __volatile__(
+ "tlbwe %2,%3,0\n"
+ "tlbwe %1,%3,1\n"
+ "tlbwe %0,%3,2\n"
+ :
+ : "r" (PPC47x_TLB2_SW | PPC47x_TLB2_SR |
+ PPC47x_TLB2_SX
+#ifdef CONFIG_SMP
+ | PPC47x_TLB2_M
+#endif
+ ),
+ "r" (phys),
+ "r" (virt | PPC47x_TLB0_VALID | PPC47x_TLB0_256M),
+ "r" (rA));
+}
+
+void __init MMU_init_hw(void)
+{
+ /* This is not useful on 47x but won't hurt either */
+ ppc44x_update_tlb_hwater();
+
+ flush_instruction_cache();
+}
+
+unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top)
+{
+ unsigned long addr;
+ unsigned long memstart = memstart_addr & ~(PPC_PIN_SIZE - 1);
+
+ /* Pin in enough TLBs to cover any lowmem not covered by the
+ * initial 256M mapping established in head_44x.S */
+ for (addr = memstart + PPC_PIN_SIZE; addr < lowmem_end_addr;
+ addr += PPC_PIN_SIZE) {
+ if (mmu_has_feature(MMU_FTR_TYPE_47x))
+ ppc47x_pin_tlb(addr + PAGE_OFFSET, addr);
+ else
+ ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
+ }
+ if (mmu_has_feature(MMU_FTR_TYPE_47x)) {
+ ppc47x_update_boltmap();
+
+#ifdef DEBUG
+ {
+ int i;
+
+ printk(KERN_DEBUG "bolted entries: ");
+ for (i = 0; i < 255; i++) {
+ if (test_bit(i, tlb_47x_boltmap))
+ printk("%d ", i);
+ }
+ printk("\n");
+ }
+#endif /* DEBUG */
+ }
+ return total_lowmem;
+}
+
+void setup_initial_memory_limit(phys_addr_t first_memblock_base,
+ phys_addr_t first_memblock_size)
+{
+ u64 size;
+
+#ifndef CONFIG_NONSTATIC_KERNEL
+ /* We don't currently support the first MEMBLOCK not mapping 0
+ * physical on those processors
+ */
+ BUG_ON(first_memblock_base != 0);
+#endif
+
+ /* 44x has a 256M TLB entry pinned at boot */
+ size = (min_t(u64, first_memblock_size, PPC_PIN_SIZE));
+ memblock_set_current_limit(first_memblock_base + size);
+}
+
+#ifdef CONFIG_SMP
+void __init mmu_init_secondary(int cpu)
+{
+ unsigned long addr;
+ unsigned long memstart = memstart_addr & ~(PPC_PIN_SIZE - 1);
+
+ /* Pin in enough TLBs to cover any lowmem not covered by the
+ * initial 256M mapping established in head_44x.S
+ *
+ * WARNING: This is called with only the first 256M of the
+ * linear mapping in the TLB and we can't take faults yet
+ * so beware of what this code uses. It runs off a temporary
+ * stack. current (r2) isn't initialized, smp_processor_id()
+ * will not work, current thread info isn't accessible, ...
+ */
+ for (addr = memstart + PPC_PIN_SIZE; addr < lowmem_end_addr;
+ addr += PPC_PIN_SIZE) {
+ if (mmu_has_feature(MMU_FTR_TYPE_47x))
+ ppc47x_pin_tlb(addr + PAGE_OFFSET, addr);
+ else
+ ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
+ }
+}
+#endif /* CONFIG_SMP */
diff --git a/arch/powerpc/mm/nohash/8xx.c b/arch/powerpc/mm/nohash/8xx.c
new file mode 100644
index 0000000000..a642a79298
--- /dev/null
+++ b/arch/powerpc/mm/nohash/8xx.c
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * This file contains the routines for initializing the MMU
+ * on the 8xx series of chips.
+ * -- christophe
+ *
+ * Derived from arch/powerpc/mm/40x_mmu.c:
+ */
+
+#include <linux/memblock.h>
+#include <linux/hugetlb.h>
+
+#include <mm/mmu_decl.h>
+
+#define IMMR_SIZE (FIX_IMMR_SIZE << PAGE_SHIFT)
+
+static unsigned long block_mapped_ram;
+
+/*
+ * Return PA for this VA if it is in an area mapped with LTLBs or fixmap.
+ * Otherwise, returns 0
+ */
+phys_addr_t v_block_mapped(unsigned long va)
+{
+ unsigned long p = PHYS_IMMR_BASE;
+
+ if (va >= VIRT_IMMR_BASE && va < VIRT_IMMR_BASE + IMMR_SIZE)
+ return p + va - VIRT_IMMR_BASE;
+ if (va >= PAGE_OFFSET && va < PAGE_OFFSET + block_mapped_ram)
+ return __pa(va);
+ return 0;
+}
+
+/*
+ * Return VA for a given PA mapped with LTLBs or fixmap
+ * Return 0 if not mapped
+ */
+unsigned long p_block_mapped(phys_addr_t pa)
+{
+ unsigned long p = PHYS_IMMR_BASE;
+
+ if (pa >= p && pa < p + IMMR_SIZE)
+ return VIRT_IMMR_BASE + pa - p;
+ if (pa < block_mapped_ram)
+ return (unsigned long)__va(pa);
+ return 0;
+}
+
+static pte_t __init *early_hugepd_alloc_kernel(hugepd_t *pmdp, unsigned long va)
+{
+ if (hpd_val(*pmdp) == 0) {
+ pte_t *ptep = memblock_alloc(sizeof(pte_basic_t), SZ_4K);
+
+ if (!ptep)
+ return NULL;
+
+ hugepd_populate_kernel((hugepd_t *)pmdp, ptep, PAGE_SHIFT_8M);
+ hugepd_populate_kernel((hugepd_t *)pmdp + 1, ptep, PAGE_SHIFT_8M);
+ }
+ return hugepte_offset(*(hugepd_t *)pmdp, va, PGDIR_SHIFT);
+}
+
+static int __ref __early_map_kernel_hugepage(unsigned long va, phys_addr_t pa,
+ pgprot_t prot, int psize, bool new)
+{
+ pmd_t *pmdp = pmd_off_k(va);
+ pte_t *ptep;
+
+ if (WARN_ON(psize != MMU_PAGE_512K && psize != MMU_PAGE_8M))
+ return -EINVAL;
+
+ if (new) {
+ if (WARN_ON(slab_is_available()))
+ return -EINVAL;
+
+ if (psize == MMU_PAGE_512K)
+ ptep = early_pte_alloc_kernel(pmdp, va);
+ else
+ ptep = early_hugepd_alloc_kernel((hugepd_t *)pmdp, va);
+ } else {
+ if (psize == MMU_PAGE_512K)
+ ptep = pte_offset_kernel(pmdp, va);
+ else
+ ptep = hugepte_offset(*(hugepd_t *)pmdp, va, PGDIR_SHIFT);
+ }
+
+ if (WARN_ON(!ptep))
+ return -ENOMEM;
+
+ /* The PTE should never be already present */
+ if (new && WARN_ON(pte_present(*ptep) && pgprot_val(prot)))
+ return -EINVAL;
+
+ set_huge_pte_at(&init_mm, va, ptep,
+ pte_mkhuge(pfn_pte(pa >> PAGE_SHIFT, prot)), psize);
+
+ return 0;
+}
+
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+void __init MMU_init_hw(void)
+{
+}
+
+static bool immr_is_mapped __initdata;
+
+void __init mmu_mapin_immr(void)
+{
+ if (immr_is_mapped)
+ return;
+
+ immr_is_mapped = true;
+
+ __early_map_kernel_hugepage(VIRT_IMMR_BASE, PHYS_IMMR_BASE,
+ PAGE_KERNEL_NCG, MMU_PAGE_512K, true);
+}
+
+static void mmu_mapin_ram_chunk(unsigned long offset, unsigned long top,
+ pgprot_t prot, bool new)
+{
+ unsigned long v = PAGE_OFFSET + offset;
+ unsigned long p = offset;
+
+ WARN_ON(!IS_ALIGNED(offset, SZ_512K) || !IS_ALIGNED(top, SZ_512K));
+
+ for (; p < ALIGN(p, SZ_8M) && p < top; p += SZ_512K, v += SZ_512K)
+ __early_map_kernel_hugepage(v, p, prot, MMU_PAGE_512K, new);
+ for (; p < ALIGN_DOWN(top, SZ_8M) && p < top; p += SZ_8M, v += SZ_8M)
+ __early_map_kernel_hugepage(v, p, prot, MMU_PAGE_8M, new);
+ for (; p < ALIGN_DOWN(top, SZ_512K) && p < top; p += SZ_512K, v += SZ_512K)
+ __early_map_kernel_hugepage(v, p, prot, MMU_PAGE_512K, new);
+
+ if (!new)
+ flush_tlb_kernel_range(PAGE_OFFSET + v, PAGE_OFFSET + top);
+}
+
+unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top)
+{
+ unsigned long etext8 = ALIGN(__pa(_etext), SZ_8M);
+ unsigned long sinittext = __pa(_sinittext);
+ bool strict_boundary = strict_kernel_rwx_enabled() || debug_pagealloc_enabled_or_kfence();
+ unsigned long boundary = strict_boundary ? sinittext : etext8;
+ unsigned long einittext8 = ALIGN(__pa(_einittext), SZ_8M);
+
+ WARN_ON(top < einittext8);
+
+ mmu_mapin_immr();
+
+ mmu_mapin_ram_chunk(0, boundary, PAGE_KERNEL_TEXT, true);
+ if (debug_pagealloc_enabled_or_kfence()) {
+ top = boundary;
+ } else {
+ mmu_mapin_ram_chunk(boundary, einittext8, PAGE_KERNEL_TEXT, true);
+ mmu_mapin_ram_chunk(einittext8, top, PAGE_KERNEL, true);
+ }
+
+ if (top > SZ_32M)
+ memblock_set_current_limit(top);
+
+ block_mapped_ram = top;
+
+ return top;
+}
+
+void mmu_mark_initmem_nx(void)
+{
+ unsigned long etext8 = ALIGN(__pa(_etext), SZ_8M);
+ unsigned long sinittext = __pa(_sinittext);
+ unsigned long boundary = strict_kernel_rwx_enabled() ? sinittext : etext8;
+ unsigned long einittext8 = ALIGN(__pa(_einittext), SZ_8M);
+
+ if (!debug_pagealloc_enabled_or_kfence())
+ mmu_mapin_ram_chunk(boundary, einittext8, PAGE_KERNEL, false);
+
+ mmu_pin_tlb(block_mapped_ram, false);
+}
+
+#ifdef CONFIG_STRICT_KERNEL_RWX
+void mmu_mark_rodata_ro(void)
+{
+ unsigned long sinittext = __pa(_sinittext);
+
+ mmu_mapin_ram_chunk(0, sinittext, PAGE_KERNEL_ROX, false);
+ if (IS_ENABLED(CONFIG_PIN_TLB_DATA))
+ mmu_pin_tlb(block_mapped_ram, true);
+}
+#endif
+
+void __init setup_initial_memory_limit(phys_addr_t first_memblock_base,
+ phys_addr_t first_memblock_size)
+{
+ /* We don't currently support the first MEMBLOCK not mapping 0
+ * physical on those processors
+ */
+ BUG_ON(first_memblock_base != 0);
+
+ /* 8xx can only access 32MB at the moment */
+ memblock_set_current_limit(min_t(u64, first_memblock_size, SZ_32M));
+}
+
+int pud_clear_huge(pud_t *pud)
+{
+ return 0;
+}
+
+int pmd_clear_huge(pmd_t *pmd)
+{
+ return 0;
+}
diff --git a/arch/powerpc/mm/nohash/Makefile b/arch/powerpc/mm/nohash/Makefile
new file mode 100644
index 0000000000..f3894e79d5
--- /dev/null
+++ b/arch/powerpc/mm/nohash/Makefile
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+
+ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC)
+
+obj-y += mmu_context.o tlb.o tlb_low.o kup.o
+obj-$(CONFIG_PPC_BOOK3E_64) += tlb_low_64e.o book3e_pgtable.o
+obj-$(CONFIG_40x) += 40x.o
+obj-$(CONFIG_44x) += 44x.o
+obj-$(CONFIG_PPC_8xx) += 8xx.o
+obj-$(CONFIG_PPC_E500) += e500.o
+obj-$(CONFIG_RANDOMIZE_BASE) += kaslr_booke.o
+ifdef CONFIG_HUGETLB_PAGE
+obj-$(CONFIG_PPC_E500) += e500_hugetlbpage.o
+endif
+
+# Disable kcov instrumentation on sensitive code
+# This is necessary for booting with kcov enabled on book3e machines
+KCOV_INSTRUMENT_tlb.o := n
+KCOV_INSTRUMENT_e500.o := n
diff --git a/arch/powerpc/mm/nohash/book3e_pgtable.c b/arch/powerpc/mm/nohash/book3e_pgtable.c
new file mode 100644
index 0000000000..b80fc4a91a
--- /dev/null
+++ b/arch/powerpc/mm/nohash/book3e_pgtable.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2005, Paul Mackerras, IBM Corporation.
+ * Copyright 2009, Benjamin Herrenschmidt, IBM Corporation.
+ * Copyright 2015-2016, Aneesh Kumar K.V, IBM Corporation.
+ */
+
+#include <linux/sched.h>
+#include <linux/memblock.h>
+#include <asm/pgalloc.h>
+#include <asm/tlb.h>
+#include <asm/dma.h>
+#include <asm/code-patching.h>
+
+#include <mm/mmu_decl.h>
+
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+/*
+ * On Book3E CPUs, the vmemmap is currently mapped in the top half of
+ * the vmalloc space using normal page tables, though the size of
+ * pages encoded in the PTEs can be different
+ */
+int __meminit vmemmap_create_mapping(unsigned long start,
+ unsigned long page_size,
+ unsigned long phys)
+{
+ /* Create a PTE encoding without page size */
+ unsigned long i, flags = _PAGE_PRESENT | _PAGE_ACCESSED |
+ _PAGE_KERNEL_RW;
+
+ /* PTEs only contain page size encodings up to 32M */
+ BUG_ON(mmu_psize_defs[mmu_vmemmap_psize].enc > 0xf);
+
+ /* Encode the size in the PTE */
+ flags |= mmu_psize_defs[mmu_vmemmap_psize].enc << 8;
+
+ /* For each PTE for that area, map things. Note that we don't
+ * increment phys because all PTEs are of the large size and
+ * thus must have the low bits clear
+ */
+ for (i = 0; i < page_size; i += PAGE_SIZE)
+ BUG_ON(map_kernel_page(start + i, phys, __pgprot(flags)));
+
+ return 0;
+}
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+void vmemmap_remove_mapping(unsigned long start,
+ unsigned long page_size)
+{
+}
+#endif
+#endif /* CONFIG_SPARSEMEM_VMEMMAP */
+
+static void __init *early_alloc_pgtable(unsigned long size)
+{
+ void *ptr;
+
+ ptr = memblock_alloc_try_nid(size, size, MEMBLOCK_LOW_LIMIT,
+ __pa(MAX_DMA_ADDRESS), NUMA_NO_NODE);
+
+ if (!ptr)
+ panic("%s: Failed to allocate %lu bytes align=0x%lx max_addr=%lx\n",
+ __func__, size, size, __pa(MAX_DMA_ADDRESS));
+
+ return ptr;
+}
+
+/*
+ * map_kernel_page currently only called by __ioremap
+ * map_kernel_page adds an entry to the ioremap page table
+ * and adds an entry to the HPT, possibly bolting it
+ */
+int __ref map_kernel_page(unsigned long ea, unsigned long pa, pgprot_t prot)
+{
+ pgd_t *pgdp;
+ p4d_t *p4dp;
+ pud_t *pudp;
+ pmd_t *pmdp;
+ pte_t *ptep;
+
+ BUILD_BUG_ON(TASK_SIZE_USER64 > PGTABLE_RANGE);
+ if (slab_is_available()) {
+ pgdp = pgd_offset_k(ea);
+ p4dp = p4d_offset(pgdp, ea);
+ pudp = pud_alloc(&init_mm, p4dp, ea);
+ if (!pudp)
+ return -ENOMEM;
+ pmdp = pmd_alloc(&init_mm, pudp, ea);
+ if (!pmdp)
+ return -ENOMEM;
+ ptep = pte_alloc_kernel(pmdp, ea);
+ if (!ptep)
+ return -ENOMEM;
+ } else {
+ pgdp = pgd_offset_k(ea);
+ p4dp = p4d_offset(pgdp, ea);
+ if (p4d_none(*p4dp)) {
+ pudp = early_alloc_pgtable(PUD_TABLE_SIZE);
+ p4d_populate(&init_mm, p4dp, pudp);
+ }
+ pudp = pud_offset(p4dp, ea);
+ if (pud_none(*pudp)) {
+ pmdp = early_alloc_pgtable(PMD_TABLE_SIZE);
+ pud_populate(&init_mm, pudp, pmdp);
+ }
+ pmdp = pmd_offset(pudp, ea);
+ if (!pmd_present(*pmdp)) {
+ ptep = early_alloc_pgtable(PTE_TABLE_SIZE);
+ pmd_populate_kernel(&init_mm, pmdp, ptep);
+ }
+ ptep = pte_offset_kernel(pmdp, ea);
+ }
+ set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT, prot));
+
+ smp_wmb();
+ return 0;
+}
+
+void __patch_exception(int exc, unsigned long addr)
+{
+ unsigned int *ibase = &interrupt_base_book3e;
+
+ /*
+ * Our exceptions vectors start with a NOP and -then- a branch
+ * to deal with single stepping from userspace which stops on
+ * the second instruction. Thus we need to patch the second
+ * instruction of the exception, not the first one.
+ */
+
+ patch_branch(ibase + (exc / 4) + 1, addr, 0);
+}
diff --git a/arch/powerpc/mm/nohash/e500.c b/arch/powerpc/mm/nohash/e500.c
new file mode 100644
index 0000000000..40a4e69ae1
--- /dev/null
+++ b/arch/powerpc/mm/nohash/e500.c
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Modifications by Kumar Gala (galak@kernel.crashing.org) to support
+ * E500 Book E processors.
+ *
+ * Copyright 2004,2010 Freescale Semiconductor, Inc.
+ *
+ * This file contains the routines for initializing the MMU
+ * on the 4xx series of chips.
+ * -- paulus
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/memblock.h>
+#include <linux/of_fdt.h>
+
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/mmu.h>
+#include <linux/uaccess.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/setup.h>
+#include <asm/paca.h>
+
+#include <mm/mmu_decl.h>
+
+unsigned int tlbcam_index;
+
+struct tlbcam TLBCAM[NUM_TLBCAMS];
+
+static struct {
+ unsigned long start;
+ unsigned long limit;
+ phys_addr_t phys;
+} tlbcam_addrs[NUM_TLBCAMS];
+
+#ifdef CONFIG_PPC_85xx
+/*
+ * Return PA for this VA if it is mapped by a CAM, or 0
+ */
+phys_addr_t v_block_mapped(unsigned long va)
+{
+ int b;
+ for (b = 0; b < tlbcam_index; ++b)
+ if (va >= tlbcam_addrs[b].start && va < tlbcam_addrs[b].limit)
+ return tlbcam_addrs[b].phys + (va - tlbcam_addrs[b].start);
+ return 0;
+}
+
+/*
+ * Return VA for a given PA or 0 if not mapped
+ */
+unsigned long p_block_mapped(phys_addr_t pa)
+{
+ int b;
+ for (b = 0; b < tlbcam_index; ++b)
+ if (pa >= tlbcam_addrs[b].phys
+ && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start)
+ +tlbcam_addrs[b].phys)
+ return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys);
+ return 0;
+}
+#endif
+
+/*
+ * Set up a variable-size TLB entry (tlbcam). The parameters are not checked;
+ * in particular size must be a power of 4 between 4k and the max supported by
+ * an implementation; max may further be limited by what can be represented in
+ * an unsigned long (for example, 32-bit implementations cannot support a 4GB
+ * size).
+ */
+static void settlbcam(int index, unsigned long virt, phys_addr_t phys,
+ unsigned long size, unsigned long flags, unsigned int pid)
+{
+ unsigned int tsize;
+
+ tsize = __ilog2(size) - 10;
+
+#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC)
+ if ((flags & _PAGE_NO_CACHE) == 0)
+ flags |= _PAGE_COHERENT;
+#endif
+
+ TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index) | MAS0_NV(index+1);
+ TLBCAM[index].MAS1 = MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(tsize) | MAS1_TID(pid);
+ TLBCAM[index].MAS2 = virt & PAGE_MASK;
+
+ TLBCAM[index].MAS2 |= (flags & _PAGE_WRITETHRU) ? MAS2_W : 0;
+ TLBCAM[index].MAS2 |= (flags & _PAGE_NO_CACHE) ? MAS2_I : 0;
+ TLBCAM[index].MAS2 |= (flags & _PAGE_COHERENT) ? MAS2_M : 0;
+ TLBCAM[index].MAS2 |= (flags & _PAGE_GUARDED) ? MAS2_G : 0;
+ TLBCAM[index].MAS2 |= (flags & _PAGE_ENDIAN) ? MAS2_E : 0;
+
+ TLBCAM[index].MAS3 = (phys & MAS3_RPN) | MAS3_SR;
+ TLBCAM[index].MAS3 |= (flags & _PAGE_RW) ? MAS3_SW : 0;
+ if (mmu_has_feature(MMU_FTR_BIG_PHYS))
+ TLBCAM[index].MAS7 = (u64)phys >> 32;
+
+ /* Below is unlikely -- only for large user pages or similar */
+ if (pte_user(__pte(flags))) {
+ TLBCAM[index].MAS3 |= MAS3_UR;
+ TLBCAM[index].MAS3 |= (flags & _PAGE_EXEC) ? MAS3_UX : 0;
+ TLBCAM[index].MAS3 |= (flags & _PAGE_RW) ? MAS3_UW : 0;
+ } else {
+ TLBCAM[index].MAS3 |= (flags & _PAGE_EXEC) ? MAS3_SX : 0;
+ }
+
+ tlbcam_addrs[index].start = virt;
+ tlbcam_addrs[index].limit = virt + size - 1;
+ tlbcam_addrs[index].phys = phys;
+}
+
+static unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
+ phys_addr_t phys)
+{
+ unsigned int camsize = __ilog2(ram);
+ unsigned int align = __ffs(virt | phys);
+ unsigned long max_cam;
+
+ if ((mfspr(SPRN_MMUCFG) & MMUCFG_MAVN) == MMUCFG_MAVN_V1) {
+ /* Convert (4^max) kB to (2^max) bytes */
+ max_cam = ((mfspr(SPRN_TLB1CFG) >> 16) & 0xf) * 2 + 10;
+ camsize &= ~1U;
+ align &= ~1U;
+ } else {
+ /* Convert (2^max) kB to (2^max) bytes */
+ max_cam = __ilog2(mfspr(SPRN_TLB1PS)) + 10;
+ }
+
+ if (camsize > align)
+ camsize = align;
+ if (camsize > max_cam)
+ camsize = max_cam;
+
+ return 1UL << camsize;
+}
+
+static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt,
+ unsigned long ram, int max_cam_idx,
+ bool dryrun, bool init)
+{
+ int i;
+ unsigned long amount_mapped = 0;
+ unsigned long boundary;
+
+ if (strict_kernel_rwx_enabled())
+ boundary = (unsigned long)(_sinittext - _stext);
+ else
+ boundary = ram;
+
+ /* Calculate CAM values */
+ for (i = 0; boundary && i < max_cam_idx; i++) {
+ unsigned long cam_sz;
+ pgprot_t prot = init ? PAGE_KERNEL_X : PAGE_KERNEL_ROX;
+
+ cam_sz = calc_cam_sz(boundary, virt, phys);
+ if (!dryrun)
+ settlbcam(i, virt, phys, cam_sz, pgprot_val(prot), 0);
+
+ boundary -= cam_sz;
+ amount_mapped += cam_sz;
+ virt += cam_sz;
+ phys += cam_sz;
+ }
+ for (ram -= amount_mapped; ram && i < max_cam_idx; i++) {
+ unsigned long cam_sz;
+ pgprot_t prot = init ? PAGE_KERNEL_X : PAGE_KERNEL;
+
+ cam_sz = calc_cam_sz(ram, virt, phys);
+ if (!dryrun)
+ settlbcam(i, virt, phys, cam_sz, pgprot_val(prot), 0);
+
+ ram -= cam_sz;
+ amount_mapped += cam_sz;
+ virt += cam_sz;
+ phys += cam_sz;
+ }
+
+ if (dryrun)
+ return amount_mapped;
+
+ if (init) {
+ loadcam_multi(0, i, max_cam_idx);
+ tlbcam_index = i;
+ } else {
+ loadcam_multi(0, i, 0);
+ WARN_ON(i > tlbcam_index);
+ }
+
+#ifdef CONFIG_PPC64
+ get_paca()->tcd.esel_next = i;
+ get_paca()->tcd.esel_max = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY;
+ get_paca()->tcd.esel_first = i;
+#endif
+
+ return amount_mapped;
+}
+
+unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx, bool dryrun, bool init)
+{
+ unsigned long virt = PAGE_OFFSET;
+ phys_addr_t phys = memstart_addr;
+
+ return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx, dryrun, init);
+}
+
+#ifdef CONFIG_PPC32
+
+#if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS)
+#error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS"
+#endif
+
+unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top)
+{
+ return tlbcam_addrs[tlbcam_index - 1].limit - PAGE_OFFSET + 1;
+}
+
+void flush_instruction_cache(void)
+{
+ unsigned long tmp;
+
+ tmp = mfspr(SPRN_L1CSR1);
+ tmp |= L1CSR1_ICFI | L1CSR1_ICLFR;
+ mtspr(SPRN_L1CSR1, tmp);
+ isync();
+}
+
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+void __init MMU_init_hw(void)
+{
+ flush_instruction_cache();
+}
+
+static unsigned long __init tlbcam_sz(int idx)
+{
+ return tlbcam_addrs[idx].limit - tlbcam_addrs[idx].start + 1;
+}
+
+void __init adjust_total_lowmem(void)
+{
+ unsigned long ram;
+ int i;
+
+ /* adjust lowmem size to __max_low_memory */
+ ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem);
+
+ i = switch_to_as1();
+ __max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM, false, true);
+ restore_to_as0(i, 0, NULL, 1);
+
+ pr_info("Memory CAM mapping: ");
+ for (i = 0; i < tlbcam_index - 1; i++)
+ pr_cont("%lu/", tlbcam_sz(i) >> 20);
+ pr_cont("%lu Mb, residual: %dMb\n", tlbcam_sz(tlbcam_index - 1) >> 20,
+ (unsigned int)((total_lowmem - __max_low_memory) >> 20));
+
+ memblock_set_current_limit(memstart_addr + __max_low_memory);
+}
+
+#ifdef CONFIG_STRICT_KERNEL_RWX
+void mmu_mark_rodata_ro(void)
+{
+ unsigned long remapped;
+
+ remapped = map_mem_in_cams(__max_low_memory, CONFIG_LOWMEM_CAM_NUM, false, false);
+
+ WARN_ON(__max_low_memory != remapped);
+}
+#endif
+
+void mmu_mark_initmem_nx(void)
+{
+ /* Everything is done in mmu_mark_rodata_ro() */
+}
+
+void setup_initial_memory_limit(phys_addr_t first_memblock_base,
+ phys_addr_t first_memblock_size)
+{
+ phys_addr_t limit = first_memblock_base + first_memblock_size;
+
+ /* 64M mapped initially according to head_fsl_booke.S */
+ memblock_set_current_limit(min_t(u64, limit, 0x04000000));
+}
+
+#ifdef CONFIG_RELOCATABLE
+int __initdata is_second_reloc;
+notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start)
+{
+ unsigned long base = kernstart_virt_addr;
+ phys_addr_t size;
+
+ kernstart_addr = start;
+ if (is_second_reloc) {
+ virt_phys_offset = PAGE_OFFSET - memstart_addr;
+ kaslr_late_init();
+ return;
+ }
+
+ /*
+ * Relocatable kernel support based on processing of dynamic
+ * relocation entries. Before we get the real memstart_addr,
+ * We will compute the virt_phys_offset like this:
+ * virt_phys_offset = stext.run - kernstart_addr
+ *
+ * stext.run = (KERNELBASE & ~0x3ffffff) +
+ * (kernstart_addr & 0x3ffffff)
+ * When we relocate, we have :
+ *
+ * (kernstart_addr & 0x3ffffff) = (stext.run & 0x3ffffff)
+ *
+ * hence:
+ * virt_phys_offset = (KERNELBASE & ~0x3ffffff) -
+ * (kernstart_addr & ~0x3ffffff)
+ *
+ */
+ start &= ~0x3ffffff;
+ base &= ~0x3ffffff;
+ virt_phys_offset = base - start;
+ early_get_first_memblock_info(__va(dt_ptr), &size);
+ /*
+ * We now get the memstart_addr, then we should check if this
+ * address is the same as what the PAGE_OFFSET map to now. If
+ * not we have to change the map of PAGE_OFFSET to memstart_addr
+ * and do a second relocation.
+ */
+ if (start != memstart_addr) {
+ int n;
+ long offset = start - memstart_addr;
+
+ is_second_reloc = 1;
+ n = switch_to_as1();
+ /* map a 64M area for the second relocation */
+ if (memstart_addr > start)
+ map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM,
+ false, true);
+ else
+ map_mem_in_cams_addr(start, PAGE_OFFSET + offset,
+ 0x4000000, CONFIG_LOWMEM_CAM_NUM,
+ false, true);
+ restore_to_as0(n, offset, __va(dt_ptr), 1);
+ /* We should never reach here */
+ panic("Relocation error");
+ }
+
+ kaslr_early_init(__va(dt_ptr), size);
+}
+#endif
+#endif
diff --git a/arch/powerpc/mm/nohash/e500_hugetlbpage.c b/arch/powerpc/mm/nohash/e500_hugetlbpage.c
new file mode 100644
index 0000000000..6b30e40d45
--- /dev/null
+++ b/arch/powerpc/mm/nohash/e500_hugetlbpage.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PPC Huge TLB Page Support for Book3E MMU
+ *
+ * Copyright (C) 2009 David Gibson, IBM Corporation.
+ * Copyright (C) 2011 Becky Bruce, Freescale Semiconductor
+ *
+ */
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+
+#include <asm/mmu.h>
+
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+
+static inline int tlb1_next(void)
+{
+ struct paca_struct *paca = get_paca();
+ struct tlb_core_data *tcd;
+ int this, next;
+
+ tcd = paca->tcd_ptr;
+ this = tcd->esel_next;
+
+ next = this + 1;
+ if (next >= tcd->esel_max)
+ next = tcd->esel_first;
+
+ tcd->esel_next = next;
+ return this;
+}
+
+static inline void book3e_tlb_lock(void)
+{
+ struct paca_struct *paca = get_paca();
+ unsigned long tmp;
+ int token = smp_processor_id() + 1;
+
+ /*
+ * Besides being unnecessary in the absence of SMT, this
+ * check prevents trying to do lbarx/stbcx. on e5500 which
+ * doesn't implement either feature.
+ */
+ if (!cpu_has_feature(CPU_FTR_SMT))
+ return;
+
+ asm volatile(".machine push;"
+ ".machine e6500;"
+ "1: lbarx %0, 0, %1;"
+ "cmpwi %0, 0;"
+ "bne 2f;"
+ "stbcx. %2, 0, %1;"
+ "bne 1b;"
+ "b 3f;"
+ "2: lbzx %0, 0, %1;"
+ "cmpwi %0, 0;"
+ "bne 2b;"
+ "b 1b;"
+ "3:"
+ ".machine pop;"
+ : "=&r" (tmp)
+ : "r" (&paca->tcd_ptr->lock), "r" (token)
+ : "memory");
+}
+
+static inline void book3e_tlb_unlock(void)
+{
+ struct paca_struct *paca = get_paca();
+
+ if (!cpu_has_feature(CPU_FTR_SMT))
+ return;
+
+ isync();
+ paca->tcd_ptr->lock = 0;
+}
+#else
+static inline int tlb1_next(void)
+{
+ int index, ncams;
+
+ ncams = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY;
+
+ index = this_cpu_read(next_tlbcam_idx);
+
+ /* Just round-robin the entries and wrap when we hit the end */
+ if (unlikely(index == ncams - 1))
+ __this_cpu_write(next_tlbcam_idx, tlbcam_index);
+ else
+ __this_cpu_inc(next_tlbcam_idx);
+
+ return index;
+}
+
+static inline void book3e_tlb_lock(void)
+{
+}
+
+static inline void book3e_tlb_unlock(void)
+{
+}
+#endif
+
+static inline int book3e_tlb_exists(unsigned long ea, unsigned long pid)
+{
+ int found = 0;
+
+ mtspr(SPRN_MAS6, pid << 16);
+ asm volatile(
+ "tlbsx 0,%1\n"
+ "mfspr %0,0x271\n"
+ "srwi %0,%0,31\n"
+ : "=&r"(found) : "r"(ea));
+
+ return found;
+}
+
+static void
+book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea, pte_t pte)
+{
+ unsigned long mas1, mas2;
+ u64 mas7_3;
+ unsigned long psize, tsize, shift;
+ unsigned long flags;
+ struct mm_struct *mm;
+ int index;
+
+ if (unlikely(is_kernel_addr(ea)))
+ return;
+
+ mm = vma->vm_mm;
+
+ psize = vma_mmu_pagesize(vma);
+ shift = __ilog2(psize);
+ tsize = shift - 10;
+ /*
+ * We can't be interrupted while we're setting up the MAS
+ * registers or after we've confirmed that no tlb exists.
+ */
+ local_irq_save(flags);
+
+ book3e_tlb_lock();
+
+ if (unlikely(book3e_tlb_exists(ea, mm->context.id))) {
+ book3e_tlb_unlock();
+ local_irq_restore(flags);
+ return;
+ }
+
+ /* We have to use the CAM(TLB1) on FSL parts for hugepages */
+ index = tlb1_next();
+ mtspr(SPRN_MAS0, MAS0_ESEL(index) | MAS0_TLBSEL(1));
+
+ mas1 = MAS1_VALID | MAS1_TID(mm->context.id) | MAS1_TSIZE(tsize);
+ mas2 = ea & ~((1UL << shift) - 1);
+ mas2 |= (pte_val(pte) >> PTE_WIMGE_SHIFT) & MAS2_WIMGE_MASK;
+ mas7_3 = (u64)pte_pfn(pte) << PAGE_SHIFT;
+ mas7_3 |= (pte_val(pte) >> PTE_BAP_SHIFT) & MAS3_BAP_MASK;
+ if (!pte_dirty(pte))
+ mas7_3 &= ~(MAS3_SW|MAS3_UW);
+
+ mtspr(SPRN_MAS1, mas1);
+ mtspr(SPRN_MAS2, mas2);
+
+ if (mmu_has_feature(MMU_FTR_BIG_PHYS))
+ mtspr(SPRN_MAS7, upper_32_bits(mas7_3));
+ mtspr(SPRN_MAS3, lower_32_bits(mas7_3));
+
+ asm volatile ("tlbwe");
+
+ book3e_tlb_unlock();
+ local_irq_restore(flags);
+}
+
+/*
+ * This is called at the end of handling a user page fault, when the
+ * fault has been handled by updating a PTE in the linux page tables.
+ *
+ * This must always be called with the pte lock held.
+ */
+void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
+ unsigned long address, pte_t *ptep, unsigned int nr)
+{
+ if (is_vm_hugetlb_page(vma))
+ book3e_hugetlb_preload(vma, address, *ptep);
+}
+
+void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+ struct hstate *hstate = hstate_file(vma->vm_file);
+ unsigned long tsize = huge_page_shift(hstate) - 10;
+
+ __flush_tlb_page(vma->vm_mm, vmaddr, tsize, 0);
+}
diff --git a/arch/powerpc/mm/nohash/kaslr_booke.c b/arch/powerpc/mm/nohash/kaslr_booke.c
new file mode 100644
index 0000000000..2fb3edafe9
--- /dev/null
+++ b/arch/powerpc/mm/nohash/kaslr_booke.c
@@ -0,0 +1,395 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright (C) 2019 Jason Yan <yanaijie@huawei.com>
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/memblock.h>
+#include <linux/libfdt.h>
+#include <linux/crash_core.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <asm/cacheflush.h>
+#include <asm/kdump.h>
+#include <mm/mmu_decl.h>
+
+struct regions {
+ unsigned long pa_start;
+ unsigned long pa_end;
+ unsigned long kernel_size;
+ unsigned long dtb_start;
+ unsigned long dtb_end;
+ unsigned long initrd_start;
+ unsigned long initrd_end;
+ unsigned long crash_start;
+ unsigned long crash_end;
+ int reserved_mem;
+ int reserved_mem_addr_cells;
+ int reserved_mem_size_cells;
+};
+
+struct regions __initdata regions;
+
+static __init void kaslr_get_cmdline(void *fdt)
+{
+ early_init_dt_scan_chosen(boot_command_line);
+}
+
+static unsigned long __init rotate_xor(unsigned long hash, const void *area,
+ size_t size)
+{
+ size_t i;
+ const unsigned long *ptr = area;
+
+ for (i = 0; i < size / sizeof(hash); i++) {
+ /* Rotate by odd number of bits and XOR. */
+ hash = (hash << ((sizeof(hash) * 8) - 7)) | (hash >> 7);
+ hash ^= ptr[i];
+ }
+
+ return hash;
+}
+
+/* Attempt to create a simple starting entropy. This can make it defferent for
+ * every build but it is still not enough. Stronger entropy should
+ * be added to make it change for every boot.
+ */
+static unsigned long __init get_boot_seed(void *fdt)
+{
+ unsigned long hash = 0;
+
+ /* build-specific string for starting entropy. */
+ hash = rotate_xor(hash, linux_banner, strlen(linux_banner));
+ hash = rotate_xor(hash, fdt, fdt_totalsize(fdt));
+
+ return hash;
+}
+
+static __init u64 get_kaslr_seed(void *fdt)
+{
+ int node, len;
+ fdt64_t *prop;
+ u64 ret;
+
+ node = fdt_path_offset(fdt, "/chosen");
+ if (node < 0)
+ return 0;
+
+ prop = fdt_getprop_w(fdt, node, "kaslr-seed", &len);
+ if (!prop || len != sizeof(u64))
+ return 0;
+
+ ret = fdt64_to_cpu(*prop);
+ *prop = 0;
+ return ret;
+}
+
+static __init bool regions_overlap(u32 s1, u32 e1, u32 s2, u32 e2)
+{
+ return e1 >= s2 && e2 >= s1;
+}
+
+static __init bool overlaps_reserved_region(const void *fdt, u32 start,
+ u32 end)
+{
+ int subnode, len, i;
+ u64 base, size;
+
+ /* check for overlap with /memreserve/ entries */
+ for (i = 0; i < fdt_num_mem_rsv(fdt); i++) {
+ if (fdt_get_mem_rsv(fdt, i, &base, &size) < 0)
+ continue;
+ if (regions_overlap(start, end, base, base + size))
+ return true;
+ }
+
+ if (regions.reserved_mem < 0)
+ return false;
+
+ /* check for overlap with static reservations in /reserved-memory */
+ for (subnode = fdt_first_subnode(fdt, regions.reserved_mem);
+ subnode >= 0;
+ subnode = fdt_next_subnode(fdt, subnode)) {
+ const fdt32_t *reg;
+ u64 rsv_end;
+
+ len = 0;
+ reg = fdt_getprop(fdt, subnode, "reg", &len);
+ while (len >= (regions.reserved_mem_addr_cells +
+ regions.reserved_mem_size_cells)) {
+ base = fdt32_to_cpu(reg[0]);
+ if (regions.reserved_mem_addr_cells == 2)
+ base = (base << 32) | fdt32_to_cpu(reg[1]);
+
+ reg += regions.reserved_mem_addr_cells;
+ len -= 4 * regions.reserved_mem_addr_cells;
+
+ size = fdt32_to_cpu(reg[0]);
+ if (regions.reserved_mem_size_cells == 2)
+ size = (size << 32) | fdt32_to_cpu(reg[1]);
+
+ reg += regions.reserved_mem_size_cells;
+ len -= 4 * regions.reserved_mem_size_cells;
+
+ if (base >= regions.pa_end)
+ continue;
+
+ rsv_end = min(base + size, (u64)U32_MAX);
+
+ if (regions_overlap(start, end, base, rsv_end))
+ return true;
+ }
+ }
+ return false;
+}
+
+static __init bool overlaps_region(const void *fdt, u32 start,
+ u32 end)
+{
+ if (regions_overlap(start, end, __pa(_stext), __pa(_end)))
+ return true;
+
+ if (regions_overlap(start, end, regions.dtb_start,
+ regions.dtb_end))
+ return true;
+
+ if (regions_overlap(start, end, regions.initrd_start,
+ regions.initrd_end))
+ return true;
+
+ if (regions_overlap(start, end, regions.crash_start,
+ regions.crash_end))
+ return true;
+
+ return overlaps_reserved_region(fdt, start, end);
+}
+
+static void __init get_crash_kernel(void *fdt, unsigned long size)
+{
+#ifdef CONFIG_CRASH_CORE
+ unsigned long long crash_size, crash_base;
+ int ret;
+
+ ret = parse_crashkernel(boot_command_line, size, &crash_size,
+ &crash_base);
+ if (ret != 0 || crash_size == 0)
+ return;
+ if (crash_base == 0)
+ crash_base = KDUMP_KERNELBASE;
+
+ regions.crash_start = (unsigned long)crash_base;
+ regions.crash_end = (unsigned long)(crash_base + crash_size);
+
+ pr_debug("crash_base=0x%llx crash_size=0x%llx\n", crash_base, crash_size);
+#endif
+}
+
+static void __init get_initrd_range(void *fdt)
+{
+ u64 start, end;
+ int node, len;
+ const __be32 *prop;
+
+ node = fdt_path_offset(fdt, "/chosen");
+ if (node < 0)
+ return;
+
+ prop = fdt_getprop(fdt, node, "linux,initrd-start", &len);
+ if (!prop)
+ return;
+ start = of_read_number(prop, len / 4);
+
+ prop = fdt_getprop(fdt, node, "linux,initrd-end", &len);
+ if (!prop)
+ return;
+ end = of_read_number(prop, len / 4);
+
+ regions.initrd_start = (unsigned long)start;
+ regions.initrd_end = (unsigned long)end;
+
+ pr_debug("initrd_start=0x%llx initrd_end=0x%llx\n", start, end);
+}
+
+static __init unsigned long get_usable_address(const void *fdt,
+ unsigned long start,
+ unsigned long offset)
+{
+ unsigned long pa;
+ unsigned long pa_end;
+
+ for (pa = offset; (long)pa > (long)start; pa -= SZ_16K) {
+ pa_end = pa + regions.kernel_size;
+ if (overlaps_region(fdt, pa, pa_end))
+ continue;
+
+ return pa;
+ }
+ return 0;
+}
+
+static __init void get_cell_sizes(const void *fdt, int node, int *addr_cells,
+ int *size_cells)
+{
+ const int *prop;
+ int len;
+
+ /*
+ * Retrieve the #address-cells and #size-cells properties
+ * from the 'node', or use the default if not provided.
+ */
+ *addr_cells = *size_cells = 1;
+
+ prop = fdt_getprop(fdt, node, "#address-cells", &len);
+ if (len == 4)
+ *addr_cells = fdt32_to_cpu(*prop);
+ prop = fdt_getprop(fdt, node, "#size-cells", &len);
+ if (len == 4)
+ *size_cells = fdt32_to_cpu(*prop);
+}
+
+static unsigned long __init kaslr_legal_offset(void *dt_ptr, unsigned long index,
+ unsigned long offset)
+{
+ unsigned long koffset = 0;
+ unsigned long start;
+
+ while ((long)index >= 0) {
+ offset = memstart_addr + index * SZ_64M + offset;
+ start = memstart_addr + index * SZ_64M;
+ koffset = get_usable_address(dt_ptr, start, offset);
+ if (koffset)
+ break;
+ index--;
+ }
+
+ if (koffset != 0)
+ koffset -= memstart_addr;
+
+ return koffset;
+}
+
+static inline __init bool kaslr_disabled(void)
+{
+ return strstr(boot_command_line, "nokaslr") != NULL;
+}
+
+static unsigned long __init kaslr_choose_location(void *dt_ptr, phys_addr_t size,
+ unsigned long kernel_sz)
+{
+ unsigned long offset, random;
+ unsigned long ram, linear_sz;
+ u64 seed;
+ unsigned long index;
+
+ kaslr_get_cmdline(dt_ptr);
+ if (kaslr_disabled())
+ return 0;
+
+ random = get_boot_seed(dt_ptr);
+
+ seed = get_tb() << 32;
+ seed ^= get_tb();
+ random = rotate_xor(random, &seed, sizeof(seed));
+
+ /*
+ * Retrieve (and wipe) the seed from the FDT
+ */
+ seed = get_kaslr_seed(dt_ptr);
+ if (seed)
+ random = rotate_xor(random, &seed, sizeof(seed));
+ else
+ pr_warn("KASLR: No safe seed for randomizing the kernel base.\n");
+
+ ram = min_t(phys_addr_t, __max_low_memory, size);
+ ram = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM, true, true);
+ linear_sz = min_t(unsigned long, ram, SZ_512M);
+
+ /* If the linear size is smaller than 64M, do not randomize */
+ if (linear_sz < SZ_64M)
+ return 0;
+
+ /* check for a reserved-memory node and record its cell sizes */
+ regions.reserved_mem = fdt_path_offset(dt_ptr, "/reserved-memory");
+ if (regions.reserved_mem >= 0)
+ get_cell_sizes(dt_ptr, regions.reserved_mem,
+ &regions.reserved_mem_addr_cells,
+ &regions.reserved_mem_size_cells);
+
+ regions.pa_start = memstart_addr;
+ regions.pa_end = memstart_addr + linear_sz;
+ regions.dtb_start = __pa(dt_ptr);
+ regions.dtb_end = __pa(dt_ptr) + fdt_totalsize(dt_ptr);
+ regions.kernel_size = kernel_sz;
+
+ get_initrd_range(dt_ptr);
+ get_crash_kernel(dt_ptr, ram);
+
+ /*
+ * Decide which 64M we want to start
+ * Only use the low 8 bits of the random seed
+ */
+ index = random & 0xFF;
+ index %= linear_sz / SZ_64M;
+
+ /* Decide offset inside 64M */
+ offset = random % (SZ_64M - kernel_sz);
+ offset = round_down(offset, SZ_16K);
+
+ return kaslr_legal_offset(dt_ptr, index, offset);
+}
+
+/*
+ * To see if we need to relocate the kernel to a random offset
+ * void *dt_ptr - address of the device tree
+ * phys_addr_t size - size of the first memory block
+ */
+notrace void __init kaslr_early_init(void *dt_ptr, phys_addr_t size)
+{
+ unsigned long tlb_virt;
+ phys_addr_t tlb_phys;
+ unsigned long offset;
+ unsigned long kernel_sz;
+
+ kernel_sz = (unsigned long)_end - (unsigned long)_stext;
+
+ offset = kaslr_choose_location(dt_ptr, size, kernel_sz);
+ if (offset == 0)
+ return;
+
+ kernstart_virt_addr += offset;
+ kernstart_addr += offset;
+
+ is_second_reloc = 1;
+
+ if (offset >= SZ_64M) {
+ tlb_virt = round_down(kernstart_virt_addr, SZ_64M);
+ tlb_phys = round_down(kernstart_addr, SZ_64M);
+
+ /* Create kernel map to relocate in */
+ create_kaslr_tlb_entry(1, tlb_virt, tlb_phys);
+ }
+
+ /* Copy the kernel to it's new location and run */
+ memcpy((void *)kernstart_virt_addr, (void *)_stext, kernel_sz);
+ flush_icache_range(kernstart_virt_addr, kernstart_virt_addr + kernel_sz);
+
+ reloc_kernel_entry(dt_ptr, kernstart_virt_addr);
+}
+
+void __init kaslr_late_init(void)
+{
+ /* If randomized, clear the original kernel */
+ if (kernstart_virt_addr != KERNELBASE) {
+ unsigned long kernel_sz;
+
+ kernel_sz = (unsigned long)_end - kernstart_virt_addr;
+ memzero_explicit((void *)KERNELBASE, kernel_sz);
+ }
+}
diff --git a/arch/powerpc/mm/nohash/kup.c b/arch/powerpc/mm/nohash/kup.c
new file mode 100644
index 0000000000..e1f7de2e54
--- /dev/null
+++ b/arch/powerpc/mm/nohash/kup.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * This file contains the routines for initializing kernel userspace protection
+ */
+
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/printk.h>
+#include <linux/smp.h>
+
+#include <asm/kup.h>
+#include <asm/smp.h>
+
+#ifdef CONFIG_PPC_KUAP
+void setup_kuap(bool disabled)
+{
+ if (disabled) {
+ if (IS_ENABLED(CONFIG_40x))
+ disable_kuep = true;
+ if (smp_processor_id() == boot_cpuid)
+ cur_cpu_spec->mmu_features &= ~MMU_FTR_KUAP;
+ return;
+ }
+
+ pr_info("Activating Kernel Userspace Access Protection\n");
+
+ prevent_user_access(KUAP_READ_WRITE);
+}
+#endif
diff --git a/arch/powerpc/mm/nohash/mmu_context.c b/arch/powerpc/mm/nohash/mmu_context.c
new file mode 100644
index 0000000000..ccd5819b1b
--- /dev/null
+++ b/arch/powerpc/mm/nohash/mmu_context.c
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * This file contains the routines for handling the MMU on those
+ * PowerPC implementations where the MMU is not using the hash
+ * table, such as 8xx, 4xx, BookE's etc...
+ *
+ * Copyright 2008 Ben Herrenschmidt <benh@kernel.crashing.org>
+ * IBM Corp.
+ *
+ * Derived from previous arch/powerpc/mm/mmu_context.c
+ * and arch/powerpc/include/asm/mmu_context.h
+ *
+ * TODO:
+ *
+ * - The global context lock will not scale very well
+ * - The maps should be dynamically allocated to allow for processors
+ * that support more PID bits at runtime
+ * - Implement flush_tlb_mm() by making the context stale and picking
+ * a new one
+ * - More aggressively clear stale map bits and maybe find some way to
+ * also clear mm->cpu_vm_mask bits when processes are migrated
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/memblock.h>
+#include <linux/notifier.h>
+#include <linux/cpu.h>
+#include <linux/slab.h>
+
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+#include <asm/smp.h>
+#include <asm/kup.h>
+
+#include <mm/mmu_decl.h>
+
+/*
+ * Room for two PTE table pointers, usually the kernel and current user
+ * pointer to their respective root page table (pgdir).
+ */
+void *abatron_pteptrs[2];
+
+/*
+ * The MPC8xx has only 16 contexts. We rotate through them on each task switch.
+ * A better way would be to keep track of tasks that own contexts, and implement
+ * an LRU usage. That way very active tasks don't always have to pay the TLB
+ * reload overhead. The kernel pages are mapped shared, so the kernel can run on
+ * behalf of any task that makes a kernel entry. Shared does not mean they are
+ * not protected, just that the ASID comparison is not performed. -- Dan
+ *
+ * The IBM4xx has 256 contexts, so we can just rotate through these as a way of
+ * "switching" contexts. If the TID of the TLB is zero, the PID/TID comparison
+ * is disabled, so we can use a TID of zero to represent all kernel pages as
+ * shared among all contexts. -- Dan
+ *
+ * The IBM 47x core supports 16-bit PIDs, thus 65535 contexts. We should
+ * normally never have to steal though the facility is present if needed.
+ * -- BenH
+ */
+#define FIRST_CONTEXT 1
+#if defined(CONFIG_PPC_8xx)
+#define LAST_CONTEXT 16
+#elif defined(CONFIG_PPC_47x)
+#define LAST_CONTEXT 65535
+#else
+#define LAST_CONTEXT 255
+#endif
+
+static unsigned int next_context, nr_free_contexts;
+static unsigned long *context_map;
+static unsigned long *stale_map[NR_CPUS];
+static struct mm_struct **context_mm;
+static DEFINE_RAW_SPINLOCK(context_lock);
+
+#define CTX_MAP_SIZE \
+ (sizeof(unsigned long) * (LAST_CONTEXT / BITS_PER_LONG + 1))
+
+
+/* Steal a context from a task that has one at the moment.
+ *
+ * This is used when we are running out of available PID numbers
+ * on the processors.
+ *
+ * This isn't an LRU system, it just frees up each context in
+ * turn (sort-of pseudo-random replacement :). This would be the
+ * place to implement an LRU scheme if anyone was motivated to do it.
+ * -- paulus
+ *
+ * For context stealing, we use a slightly different approach for
+ * SMP and UP. Basically, the UP one is simpler and doesn't use
+ * the stale map as we can just flush the local CPU
+ * -- benh
+ */
+static unsigned int steal_context_smp(unsigned int id)
+{
+ struct mm_struct *mm;
+ unsigned int cpu, max, i;
+
+ max = LAST_CONTEXT - FIRST_CONTEXT;
+
+ /* Attempt to free next_context first and then loop until we manage */
+ while (max--) {
+ /* Pick up the victim mm */
+ mm = context_mm[id];
+
+ /* We have a candidate victim, check if it's active, on SMP
+ * we cannot steal active contexts
+ */
+ if (mm->context.active) {
+ id++;
+ if (id > LAST_CONTEXT)
+ id = FIRST_CONTEXT;
+ continue;
+ }
+
+ /* Mark this mm has having no context anymore */
+ mm->context.id = MMU_NO_CONTEXT;
+
+ /* Mark it stale on all CPUs that used this mm. For threaded
+ * implementations, we set it on all threads on each core
+ * represented in the mask. A future implementation will use
+ * a core map instead but this will do for now.
+ */
+ for_each_cpu(cpu, mm_cpumask(mm)) {
+ for (i = cpu_first_thread_sibling(cpu);
+ i <= cpu_last_thread_sibling(cpu); i++) {
+ if (stale_map[i])
+ __set_bit(id, stale_map[i]);
+ }
+ cpu = i - 1;
+ }
+ return id;
+ }
+
+ /* This will happen if you have more CPUs than available contexts,
+ * all we can do here is wait a bit and try again
+ */
+ raw_spin_unlock(&context_lock);
+ cpu_relax();
+ raw_spin_lock(&context_lock);
+
+ /* This will cause the caller to try again */
+ return MMU_NO_CONTEXT;
+}
+
+static unsigned int steal_all_contexts(void)
+{
+ struct mm_struct *mm;
+ int cpu = smp_processor_id();
+ unsigned int id;
+
+ for (id = FIRST_CONTEXT; id <= LAST_CONTEXT; id++) {
+ /* Pick up the victim mm */
+ mm = context_mm[id];
+
+ /* Mark this mm as having no context anymore */
+ mm->context.id = MMU_NO_CONTEXT;
+ if (id != FIRST_CONTEXT) {
+ context_mm[id] = NULL;
+ __clear_bit(id, context_map);
+ }
+ if (IS_ENABLED(CONFIG_SMP))
+ __clear_bit(id, stale_map[cpu]);
+ }
+
+ /* Flush the TLB for all contexts (not to be used on SMP) */
+ _tlbil_all();
+
+ nr_free_contexts = LAST_CONTEXT - FIRST_CONTEXT;
+
+ return FIRST_CONTEXT;
+}
+
+/* Note that this will also be called on SMP if all other CPUs are
+ * offlined, which means that it may be called for cpu != 0. For
+ * this to work, we somewhat assume that CPUs that are onlined
+ * come up with a fully clean TLB (or are cleaned when offlined)
+ */
+static unsigned int steal_context_up(unsigned int id)
+{
+ struct mm_struct *mm;
+ int cpu = smp_processor_id();
+
+ /* Pick up the victim mm */
+ mm = context_mm[id];
+
+ /* Flush the TLB for that context */
+ local_flush_tlb_mm(mm);
+
+ /* Mark this mm has having no context anymore */
+ mm->context.id = MMU_NO_CONTEXT;
+
+ /* XXX This clear should ultimately be part of local_flush_tlb_mm */
+ if (IS_ENABLED(CONFIG_SMP))
+ __clear_bit(id, stale_map[cpu]);
+
+ return id;
+}
+
+static void set_context(unsigned long id, pgd_t *pgd)
+{
+ if (IS_ENABLED(CONFIG_PPC_8xx)) {
+ s16 offset = (s16)(__pa(swapper_pg_dir));
+
+ /*
+ * Register M_TWB will contain base address of level 1 table minus the
+ * lower part of the kernel PGDIR base address, so that all accesses to
+ * level 1 table are done relative to lower part of kernel PGDIR base
+ * address.
+ */
+ mtspr(SPRN_M_TWB, __pa(pgd) - offset);
+
+ /* Update context */
+ mtspr(SPRN_M_CASID, id - 1);
+
+ /* sync */
+ mb();
+ } else if (kuap_is_disabled()) {
+ if (IS_ENABLED(CONFIG_40x))
+ mb(); /* sync */
+
+ mtspr(SPRN_PID, id);
+ isync();
+ }
+}
+
+void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+ unsigned int id;
+ unsigned int i, cpu = smp_processor_id();
+ unsigned long *map;
+
+ /* No lockless fast path .. yet */
+ raw_spin_lock(&context_lock);
+
+ if (IS_ENABLED(CONFIG_SMP)) {
+ /* Mark us active and the previous one not anymore */
+ next->context.active++;
+ if (prev) {
+ WARN_ON(prev->context.active < 1);
+ prev->context.active--;
+ }
+ }
+
+ again:
+
+ /* If we already have a valid assigned context, skip all that */
+ id = next->context.id;
+ if (likely(id != MMU_NO_CONTEXT))
+ goto ctxt_ok;
+
+ /* We really don't have a context, let's try to acquire one */
+ id = next_context;
+ if (id > LAST_CONTEXT)
+ id = FIRST_CONTEXT;
+ map = context_map;
+
+ /* No more free contexts, let's try to steal one */
+ if (nr_free_contexts == 0) {
+ if (num_online_cpus() > 1) {
+ id = steal_context_smp(id);
+ if (id == MMU_NO_CONTEXT)
+ goto again;
+ goto stolen;
+ }
+ if (IS_ENABLED(CONFIG_PPC_8xx))
+ id = steal_all_contexts();
+ else
+ id = steal_context_up(id);
+ goto stolen;
+ }
+ nr_free_contexts--;
+
+ /* We know there's at least one free context, try to find it */
+ while (__test_and_set_bit(id, map)) {
+ id = find_next_zero_bit(map, LAST_CONTEXT+1, id);
+ if (id > LAST_CONTEXT)
+ id = FIRST_CONTEXT;
+ }
+ stolen:
+ next_context = id + 1;
+ context_mm[id] = next;
+ next->context.id = id;
+
+ ctxt_ok:
+
+ /* If that context got marked stale on this CPU, then flush the
+ * local TLB for it and unmark it before we use it
+ */
+ if (IS_ENABLED(CONFIG_SMP) && test_bit(id, stale_map[cpu])) {
+ local_flush_tlb_mm(next);
+
+ /* XXX This clear should ultimately be part of local_flush_tlb_mm */
+ for (i = cpu_first_thread_sibling(cpu);
+ i <= cpu_last_thread_sibling(cpu); i++) {
+ if (stale_map[i])
+ __clear_bit(id, stale_map[i]);
+ }
+ }
+
+ /* Flick the MMU and release lock */
+ if (IS_ENABLED(CONFIG_BDI_SWITCH))
+ abatron_pteptrs[1] = next->pgd;
+ set_context(id, next->pgd);
+#if defined(CONFIG_BOOKE_OR_40x) && defined(CONFIG_PPC_KUAP)
+ tsk->thread.pid = id;
+#endif
+ raw_spin_unlock(&context_lock);
+}
+
+/*
+ * Set up the context for a new address space.
+ */
+int init_new_context(struct task_struct *t, struct mm_struct *mm)
+{
+ mm->context.id = MMU_NO_CONTEXT;
+ mm->context.active = 0;
+ pte_frag_set(&mm->context, NULL);
+ return 0;
+}
+
+/*
+ * We're finished using the context for an address space.
+ */
+void destroy_context(struct mm_struct *mm)
+{
+ unsigned long flags;
+ unsigned int id;
+
+ if (mm->context.id == MMU_NO_CONTEXT)
+ return;
+
+ WARN_ON(mm->context.active != 0);
+
+ raw_spin_lock_irqsave(&context_lock, flags);
+ id = mm->context.id;
+ if (id != MMU_NO_CONTEXT) {
+ __clear_bit(id, context_map);
+ mm->context.id = MMU_NO_CONTEXT;
+ context_mm[id] = NULL;
+ nr_free_contexts++;
+ }
+ raw_spin_unlock_irqrestore(&context_lock, flags);
+}
+
+static int mmu_ctx_cpu_prepare(unsigned int cpu)
+{
+ /* We don't touch CPU 0 map, it's allocated at aboot and kept
+ * around forever
+ */
+ if (cpu == boot_cpuid)
+ return 0;
+
+ stale_map[cpu] = kzalloc(CTX_MAP_SIZE, GFP_KERNEL);
+ return 0;
+}
+
+static int mmu_ctx_cpu_dead(unsigned int cpu)
+{
+#ifdef CONFIG_HOTPLUG_CPU
+ if (cpu == boot_cpuid)
+ return 0;
+
+ kfree(stale_map[cpu]);
+ stale_map[cpu] = NULL;
+
+ /* We also clear the cpu_vm_mask bits of CPUs going away */
+ clear_tasks_mm_cpumask(cpu);
+#endif
+ return 0;
+}
+
+/*
+ * Initialize the context management stuff.
+ */
+void __init mmu_context_init(void)
+{
+ /* Mark init_mm as being active on all possible CPUs since
+ * we'll get called with prev == init_mm the first time
+ * we schedule on a given CPU
+ */
+ init_mm.context.active = NR_CPUS;
+
+ /*
+ * Allocate the maps used by context management
+ */
+ context_map = memblock_alloc(CTX_MAP_SIZE, SMP_CACHE_BYTES);
+ if (!context_map)
+ panic("%s: Failed to allocate %zu bytes\n", __func__,
+ CTX_MAP_SIZE);
+ context_mm = memblock_alloc(sizeof(void *) * (LAST_CONTEXT + 1),
+ SMP_CACHE_BYTES);
+ if (!context_mm)
+ panic("%s: Failed to allocate %zu bytes\n", __func__,
+ sizeof(void *) * (LAST_CONTEXT + 1));
+ if (IS_ENABLED(CONFIG_SMP)) {
+ stale_map[boot_cpuid] = memblock_alloc(CTX_MAP_SIZE, SMP_CACHE_BYTES);
+ if (!stale_map[boot_cpuid])
+ panic("%s: Failed to allocate %zu bytes\n", __func__,
+ CTX_MAP_SIZE);
+
+ cpuhp_setup_state_nocalls(CPUHP_POWERPC_MMU_CTX_PREPARE,
+ "powerpc/mmu/ctx:prepare",
+ mmu_ctx_cpu_prepare, mmu_ctx_cpu_dead);
+ }
+
+ printk(KERN_INFO
+ "MMU: Allocated %zu bytes of context maps for %d contexts\n",
+ 2 * CTX_MAP_SIZE + (sizeof(void *) * (LAST_CONTEXT + 1)),
+ LAST_CONTEXT - FIRST_CONTEXT + 1);
+
+ /*
+ * Some processors have too few contexts to reserve one for
+ * init_mm, and require using context 0 for a normal task.
+ * Other processors reserve the use of context zero for the kernel.
+ * This code assumes FIRST_CONTEXT < 32.
+ */
+ context_map[0] = (1 << FIRST_CONTEXT) - 1;
+ next_context = FIRST_CONTEXT;
+ nr_free_contexts = LAST_CONTEXT - FIRST_CONTEXT + 1;
+}
diff --git a/arch/powerpc/mm/nohash/tlb.c b/arch/powerpc/mm/nohash/tlb.c
new file mode 100644
index 0000000000..5ffa0af432
--- /dev/null
+++ b/arch/powerpc/mm/nohash/tlb.c
@@ -0,0 +1,744 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * This file contains the routines for TLB flushing.
+ * On machines where the MMU does not use a hash table to store virtual to
+ * physical translations (ie, SW loaded TLBs or Book3E compilant processors,
+ * this does -not- include 603 however which shares the implementation with
+ * hash based processors)
+ *
+ * -- BenH
+ *
+ * Copyright 2008,2009 Ben Herrenschmidt <benh@kernel.crashing.org>
+ * IBM Corp.
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ */
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/highmem.h>
+#include <linux/pagemap.h>
+#include <linux/preempt.h>
+#include <linux/spinlock.h>
+#include <linux/memblock.h>
+#include <linux/of_fdt.h>
+#include <linux/hugetlb.h>
+
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/tlb.h>
+#include <asm/code-patching.h>
+#include <asm/cputhreads.h>
+#include <asm/hugetlb.h>
+#include <asm/paca.h>
+
+#include <mm/mmu_decl.h>
+
+/*
+ * This struct lists the sw-supported page sizes. The hardawre MMU may support
+ * other sizes not listed here. The .ind field is only used on MMUs that have
+ * indirect page table entries.
+ */
+#ifdef CONFIG_PPC_E500
+struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
+ [MMU_PAGE_4K] = {
+ .shift = 12,
+ .enc = BOOK3E_PAGESZ_4K,
+ },
+ [MMU_PAGE_2M] = {
+ .shift = 21,
+ .enc = BOOK3E_PAGESZ_2M,
+ },
+ [MMU_PAGE_4M] = {
+ .shift = 22,
+ .enc = BOOK3E_PAGESZ_4M,
+ },
+ [MMU_PAGE_16M] = {
+ .shift = 24,
+ .enc = BOOK3E_PAGESZ_16M,
+ },
+ [MMU_PAGE_64M] = {
+ .shift = 26,
+ .enc = BOOK3E_PAGESZ_64M,
+ },
+ [MMU_PAGE_256M] = {
+ .shift = 28,
+ .enc = BOOK3E_PAGESZ_256M,
+ },
+ [MMU_PAGE_1G] = {
+ .shift = 30,
+ .enc = BOOK3E_PAGESZ_1GB,
+ },
+};
+
+static inline int mmu_get_tsize(int psize)
+{
+ return mmu_psize_defs[psize].enc;
+}
+#else
+static inline int mmu_get_tsize(int psize)
+{
+ /* This isn't used on !Book3E for now */
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_PPC_8xx
+struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
+ [MMU_PAGE_4K] = {
+ .shift = 12,
+ },
+ [MMU_PAGE_16K] = {
+ .shift = 14,
+ },
+ [MMU_PAGE_512K] = {
+ .shift = 19,
+ },
+ [MMU_PAGE_8M] = {
+ .shift = 23,
+ },
+};
+#endif
+
+/* The variables below are currently only used on 64-bit Book3E
+ * though this will probably be made common with other nohash
+ * implementations at some point
+ */
+#ifdef CONFIG_PPC64
+
+int mmu_pte_psize; /* Page size used for PTE pages */
+int mmu_vmemmap_psize; /* Page size used for the virtual mem map */
+int book3e_htw_mode; /* HW tablewalk? Value is PPC_HTW_* */
+unsigned long linear_map_top; /* Top of linear mapping */
+
+
+/*
+ * Number of bytes to add to SPRN_SPRG_TLB_EXFRAME on crit/mcheck/debug
+ * exceptions. This is used for bolted and e6500 TLB miss handlers which
+ * do not modify this SPRG in the TLB miss code; for other TLB miss handlers,
+ * this is set to zero.
+ */
+int extlb_level_exc;
+
+#endif /* CONFIG_PPC64 */
+
+#ifdef CONFIG_PPC_E500
+/* next_tlbcam_idx is used to round-robin tlbcam entry assignment */
+DEFINE_PER_CPU(int, next_tlbcam_idx);
+EXPORT_PER_CPU_SYMBOL(next_tlbcam_idx);
+#endif
+
+/*
+ * Base TLB flushing operations:
+ *
+ * - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ * - flush_tlb_page(vma, vmaddr) flushes one page
+ * - flush_tlb_range(vma, start, end) flushes a range of pages
+ * - flush_tlb_kernel_range(start, end) flushes kernel pages
+ *
+ * - local_* variants of page and mm only apply to the current
+ * processor
+ */
+
+#ifndef CONFIG_PPC_8xx
+/*
+ * These are the base non-SMP variants of page and mm flushing
+ */
+void local_flush_tlb_mm(struct mm_struct *mm)
+{
+ unsigned int pid;
+
+ preempt_disable();
+ pid = mm->context.id;
+ if (pid != MMU_NO_CONTEXT)
+ _tlbil_pid(pid);
+ preempt_enable();
+}
+EXPORT_SYMBOL(local_flush_tlb_mm);
+
+void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
+ int tsize, int ind)
+{
+ unsigned int pid;
+
+ preempt_disable();
+ pid = mm ? mm->context.id : 0;
+ if (pid != MMU_NO_CONTEXT)
+ _tlbil_va(vmaddr, pid, tsize, ind);
+ preempt_enable();
+}
+
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+ __local_flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr,
+ mmu_get_tsize(mmu_virtual_psize), 0);
+}
+EXPORT_SYMBOL(local_flush_tlb_page);
+
+void local_flush_tlb_page_psize(struct mm_struct *mm,
+ unsigned long vmaddr, int psize)
+{
+ __local_flush_tlb_page(mm, vmaddr, mmu_get_tsize(psize), 0);
+}
+EXPORT_SYMBOL(local_flush_tlb_page_psize);
+
+#endif
+
+/*
+ * And here are the SMP non-local implementations
+ */
+#ifdef CONFIG_SMP
+
+static DEFINE_RAW_SPINLOCK(tlbivax_lock);
+
+struct tlb_flush_param {
+ unsigned long addr;
+ unsigned int pid;
+ unsigned int tsize;
+ unsigned int ind;
+};
+
+static void do_flush_tlb_mm_ipi(void *param)
+{
+ struct tlb_flush_param *p = param;
+
+ _tlbil_pid(p ? p->pid : 0);
+}
+
+static void do_flush_tlb_page_ipi(void *param)
+{
+ struct tlb_flush_param *p = param;
+
+ _tlbil_va(p->addr, p->pid, p->tsize, p->ind);
+}
+
+
+/* Note on invalidations and PID:
+ *
+ * We snapshot the PID with preempt disabled. At this point, it can still
+ * change either because:
+ * - our context is being stolen (PID -> NO_CONTEXT) on another CPU
+ * - we are invaliating some target that isn't currently running here
+ * and is concurrently acquiring a new PID on another CPU
+ * - some other CPU is re-acquiring a lost PID for this mm
+ * etc...
+ *
+ * However, this shouldn't be a problem as we only guarantee
+ * invalidation of TLB entries present prior to this call, so we
+ * don't care about the PID changing, and invalidating a stale PID
+ * is generally harmless.
+ */
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+ unsigned int pid;
+
+ preempt_disable();
+ pid = mm->context.id;
+ if (unlikely(pid == MMU_NO_CONTEXT))
+ goto no_context;
+ if (!mm_is_core_local(mm)) {
+ struct tlb_flush_param p = { .pid = pid };
+ /* Ignores smp_processor_id() even if set. */
+ smp_call_function_many(mm_cpumask(mm),
+ do_flush_tlb_mm_ipi, &p, 1);
+ }
+ _tlbil_pid(pid);
+ no_context:
+ preempt_enable();
+}
+EXPORT_SYMBOL(flush_tlb_mm);
+
+void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
+ int tsize, int ind)
+{
+ struct cpumask *cpu_mask;
+ unsigned int pid;
+
+ /*
+ * This function as well as __local_flush_tlb_page() must only be called
+ * for user contexts.
+ */
+ if (WARN_ON(!mm))
+ return;
+
+ preempt_disable();
+ pid = mm->context.id;
+ if (unlikely(pid == MMU_NO_CONTEXT))
+ goto bail;
+ cpu_mask = mm_cpumask(mm);
+ if (!mm_is_core_local(mm)) {
+ /* If broadcast tlbivax is supported, use it */
+ if (mmu_has_feature(MMU_FTR_USE_TLBIVAX_BCAST)) {
+ int lock = mmu_has_feature(MMU_FTR_LOCK_BCAST_INVAL);
+ if (lock)
+ raw_spin_lock(&tlbivax_lock);
+ _tlbivax_bcast(vmaddr, pid, tsize, ind);
+ if (lock)
+ raw_spin_unlock(&tlbivax_lock);
+ goto bail;
+ } else {
+ struct tlb_flush_param p = {
+ .pid = pid,
+ .addr = vmaddr,
+ .tsize = tsize,
+ .ind = ind,
+ };
+ /* Ignores smp_processor_id() even if set in cpu_mask */
+ smp_call_function_many(cpu_mask,
+ do_flush_tlb_page_ipi, &p, 1);
+ }
+ }
+ _tlbil_va(vmaddr, pid, tsize, ind);
+ bail:
+ preempt_enable();
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+#ifdef CONFIG_HUGETLB_PAGE
+ if (vma && is_vm_hugetlb_page(vma))
+ flush_hugetlb_page(vma, vmaddr);
+#endif
+
+ __flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr,
+ mmu_get_tsize(mmu_virtual_psize), 0);
+}
+EXPORT_SYMBOL(flush_tlb_page);
+
+#endif /* CONFIG_SMP */
+
+/*
+ * Flush kernel TLB entries in the given range
+ */
+#ifndef CONFIG_PPC_8xx
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+#ifdef CONFIG_SMP
+ preempt_disable();
+ smp_call_function(do_flush_tlb_mm_ipi, NULL, 1);
+ _tlbil_pid(0);
+ preempt_enable();
+#else
+ _tlbil_pid(0);
+#endif
+}
+EXPORT_SYMBOL(flush_tlb_kernel_range);
+#endif
+
+/*
+ * Currently, for range flushing, we just do a full mm flush. This should
+ * be optimized based on a threshold on the size of the range, since
+ * some implementation can stack multiple tlbivax before a tlbsync but
+ * for now, we keep it that way
+ */
+void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end)
+
+{
+ if (end - start == PAGE_SIZE && !(start & ~PAGE_MASK))
+ flush_tlb_page(vma, start);
+ else
+ flush_tlb_mm(vma->vm_mm);
+}
+EXPORT_SYMBOL(flush_tlb_range);
+
+void tlb_flush(struct mmu_gather *tlb)
+{
+ flush_tlb_mm(tlb->mm);
+}
+
+/*
+ * Below are functions specific to the 64-bit variant of Book3E though that
+ * may change in the future
+ */
+
+#ifdef CONFIG_PPC64
+
+/*
+ * Handling of virtual linear page tables or indirect TLB entries
+ * flushing when PTE pages are freed
+ */
+void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address)
+{
+ int tsize = mmu_psize_defs[mmu_pte_psize].enc;
+
+ if (book3e_htw_mode != PPC_HTW_NONE) {
+ unsigned long start = address & PMD_MASK;
+ unsigned long end = address + PMD_SIZE;
+ unsigned long size = 1UL << mmu_psize_defs[mmu_pte_psize].shift;
+
+ /* This isn't the most optimal, ideally we would factor out the
+ * while preempt & CPU mask mucking around, or even the IPI but
+ * it will do for now
+ */
+ while (start < end) {
+ __flush_tlb_page(tlb->mm, start, tsize, 1);
+ start += size;
+ }
+ } else {
+ unsigned long rmask = 0xf000000000000000ul;
+ unsigned long rid = (address & rmask) | 0x1000000000000000ul;
+ unsigned long vpte = address & ~rmask;
+
+ vpte = (vpte >> (PAGE_SHIFT - 3)) & ~0xffful;
+ vpte |= rid;
+ __flush_tlb_page(tlb->mm, vpte, tsize, 0);
+ }
+}
+
+static void __init setup_page_sizes(void)
+{
+ unsigned int tlb0cfg;
+ unsigned int tlb0ps;
+ unsigned int eptcfg;
+ int i, psize;
+
+#ifdef CONFIG_PPC_E500
+ unsigned int mmucfg = mfspr(SPRN_MMUCFG);
+ int fsl_mmu = mmu_has_feature(MMU_FTR_TYPE_FSL_E);
+
+ if (fsl_mmu && (mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V1) {
+ unsigned int tlb1cfg = mfspr(SPRN_TLB1CFG);
+ unsigned int min_pg, max_pg;
+
+ min_pg = (tlb1cfg & TLBnCFG_MINSIZE) >> TLBnCFG_MINSIZE_SHIFT;
+ max_pg = (tlb1cfg & TLBnCFG_MAXSIZE) >> TLBnCFG_MAXSIZE_SHIFT;
+
+ for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
+ struct mmu_psize_def *def;
+ unsigned int shift;
+
+ def = &mmu_psize_defs[psize];
+ shift = def->shift;
+
+ if (shift == 0 || shift & 1)
+ continue;
+
+ /* adjust to be in terms of 4^shift Kb */
+ shift = (shift - 10) >> 1;
+
+ if ((shift >= min_pg) && (shift <= max_pg))
+ def->flags |= MMU_PAGE_SIZE_DIRECT;
+ }
+
+ goto out;
+ }
+
+ if (fsl_mmu && (mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V2) {
+ u32 tlb1cfg, tlb1ps;
+
+ tlb0cfg = mfspr(SPRN_TLB0CFG);
+ tlb1cfg = mfspr(SPRN_TLB1CFG);
+ tlb1ps = mfspr(SPRN_TLB1PS);
+ eptcfg = mfspr(SPRN_EPTCFG);
+
+ if ((tlb1cfg & TLBnCFG_IND) && (tlb0cfg & TLBnCFG_PT))
+ book3e_htw_mode = PPC_HTW_E6500;
+
+ /*
+ * We expect 4K subpage size and unrestricted indirect size.
+ * The lack of a restriction on indirect size is a Freescale
+ * extension, indicated by PSn = 0 but SPSn != 0.
+ */
+ if (eptcfg != 2)
+ book3e_htw_mode = PPC_HTW_NONE;
+
+ for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
+ struct mmu_psize_def *def = &mmu_psize_defs[psize];
+
+ if (!def->shift)
+ continue;
+
+ if (tlb1ps & (1U << (def->shift - 10))) {
+ def->flags |= MMU_PAGE_SIZE_DIRECT;
+
+ if (book3e_htw_mode && psize == MMU_PAGE_2M)
+ def->flags |= MMU_PAGE_SIZE_INDIRECT;
+ }
+ }
+
+ goto out;
+ }
+#endif
+
+ tlb0cfg = mfspr(SPRN_TLB0CFG);
+ tlb0ps = mfspr(SPRN_TLB0PS);
+ eptcfg = mfspr(SPRN_EPTCFG);
+
+ /* Look for supported direct sizes */
+ for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
+ struct mmu_psize_def *def = &mmu_psize_defs[psize];
+
+ if (tlb0ps & (1U << (def->shift - 10)))
+ def->flags |= MMU_PAGE_SIZE_DIRECT;
+ }
+
+ /* Indirect page sizes supported ? */
+ if ((tlb0cfg & TLBnCFG_IND) == 0 ||
+ (tlb0cfg & TLBnCFG_PT) == 0)
+ goto out;
+
+ book3e_htw_mode = PPC_HTW_IBM;
+
+ /* Now, we only deal with one IND page size for each
+ * direct size. Hopefully all implementations today are
+ * unambiguous, but we might want to be careful in the
+ * future.
+ */
+ for (i = 0; i < 3; i++) {
+ unsigned int ps, sps;
+
+ sps = eptcfg & 0x1f;
+ eptcfg >>= 5;
+ ps = eptcfg & 0x1f;
+ eptcfg >>= 5;
+ if (!ps || !sps)
+ continue;
+ for (psize = 0; psize < MMU_PAGE_COUNT; psize++) {
+ struct mmu_psize_def *def = &mmu_psize_defs[psize];
+
+ if (ps == (def->shift - 10))
+ def->flags |= MMU_PAGE_SIZE_INDIRECT;
+ if (sps == (def->shift - 10))
+ def->ind = ps + 10;
+ }
+ }
+
+out:
+ /* Cleanup array and print summary */
+ pr_info("MMU: Supported page sizes\n");
+ for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
+ struct mmu_psize_def *def = &mmu_psize_defs[psize];
+ const char *__page_type_names[] = {
+ "unsupported",
+ "direct",
+ "indirect",
+ "direct & indirect"
+ };
+ if (def->flags == 0) {
+ def->shift = 0;
+ continue;
+ }
+ pr_info(" %8ld KB as %s\n", 1ul << (def->shift - 10),
+ __page_type_names[def->flags & 0x3]);
+ }
+}
+
+static void __init setup_mmu_htw(void)
+{
+ /*
+ * If we want to use HW tablewalk, enable it by patching the TLB miss
+ * handlers to branch to the one dedicated to it.
+ */
+
+ switch (book3e_htw_mode) {
+ case PPC_HTW_IBM:
+ patch_exception(0x1c0, exc_data_tlb_miss_htw_book3e);
+ patch_exception(0x1e0, exc_instruction_tlb_miss_htw_book3e);
+ break;
+#ifdef CONFIG_PPC_E500
+ case PPC_HTW_E6500:
+ extlb_level_exc = EX_TLB_SIZE;
+ patch_exception(0x1c0, exc_data_tlb_miss_e6500_book3e);
+ patch_exception(0x1e0, exc_instruction_tlb_miss_e6500_book3e);
+ break;
+#endif
+ }
+ pr_info("MMU: Book3E HW tablewalk %s\n",
+ book3e_htw_mode != PPC_HTW_NONE ? "enabled" : "not supported");
+}
+
+/*
+ * Early initialization of the MMU TLB code
+ */
+static void early_init_this_mmu(void)
+{
+ unsigned int mas4;
+
+ /* Set MAS4 based on page table setting */
+
+ mas4 = 0x4 << MAS4_WIMGED_SHIFT;
+ switch (book3e_htw_mode) {
+ case PPC_HTW_E6500:
+ mas4 |= MAS4_INDD;
+ mas4 |= BOOK3E_PAGESZ_2M << MAS4_TSIZED_SHIFT;
+ mas4 |= MAS4_TLBSELD(1);
+ mmu_pte_psize = MMU_PAGE_2M;
+ break;
+
+ case PPC_HTW_IBM:
+ mas4 |= MAS4_INDD;
+ mas4 |= BOOK3E_PAGESZ_1M << MAS4_TSIZED_SHIFT;
+ mmu_pte_psize = MMU_PAGE_1M;
+ break;
+
+ case PPC_HTW_NONE:
+ mas4 |= BOOK3E_PAGESZ_4K << MAS4_TSIZED_SHIFT;
+ mmu_pte_psize = mmu_virtual_psize;
+ break;
+ }
+ mtspr(SPRN_MAS4, mas4);
+
+#ifdef CONFIG_PPC_E500
+ if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
+ unsigned int num_cams;
+ bool map = true;
+
+ /* use a quarter of the TLBCAM for bolted linear map */
+ num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4;
+
+ /*
+ * Only do the mapping once per core, or else the
+ * transient mapping would cause problems.
+ */
+#ifdef CONFIG_SMP
+ if (hweight32(get_tensr()) > 1)
+ map = false;
+#endif
+
+ if (map)
+ linear_map_top = map_mem_in_cams(linear_map_top,
+ num_cams, false, true);
+ }
+#endif
+
+ /* A sync won't hurt us after mucking around with
+ * the MMU configuration
+ */
+ mb();
+}
+
+static void __init early_init_mmu_global(void)
+{
+ /* XXX This should be decided at runtime based on supported
+ * page sizes in the TLB, but for now let's assume 16M is
+ * always there and a good fit (which it probably is)
+ *
+ * Freescale booke only supports 4K pages in TLB0, so use that.
+ */
+ if (mmu_has_feature(MMU_FTR_TYPE_FSL_E))
+ mmu_vmemmap_psize = MMU_PAGE_4K;
+ else
+ mmu_vmemmap_psize = MMU_PAGE_16M;
+
+ /* XXX This code only checks for TLB 0 capabilities and doesn't
+ * check what page size combos are supported by the HW. It
+ * also doesn't handle the case where a separate array holds
+ * the IND entries from the array loaded by the PT.
+ */
+ /* Look for supported page sizes */
+ setup_page_sizes();
+
+ /* Look for HW tablewalk support */
+ setup_mmu_htw();
+
+#ifdef CONFIG_PPC_E500
+ if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
+ if (book3e_htw_mode == PPC_HTW_NONE) {
+ extlb_level_exc = EX_TLB_SIZE;
+ patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e);
+ patch_exception(0x1e0,
+ exc_instruction_tlb_miss_bolted_book3e);
+ }
+ }
+#endif
+
+ /* Set the global containing the top of the linear mapping
+ * for use by the TLB miss code
+ */
+ linear_map_top = memblock_end_of_DRAM();
+
+ ioremap_bot = IOREMAP_BASE;
+}
+
+static void __init early_mmu_set_memory_limit(void)
+{
+#ifdef CONFIG_PPC_E500
+ if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
+ /*
+ * Limit memory so we dont have linear faults.
+ * Unlike memblock_set_current_limit, which limits
+ * memory available during early boot, this permanently
+ * reduces the memory available to Linux. We need to
+ * do this because highmem is not supported on 64-bit.
+ */
+ memblock_enforce_memory_limit(linear_map_top);
+ }
+#endif
+
+ memblock_set_current_limit(linear_map_top);
+}
+
+/* boot cpu only */
+void __init early_init_mmu(void)
+{
+ early_init_mmu_global();
+ early_init_this_mmu();
+ early_mmu_set_memory_limit();
+}
+
+void early_init_mmu_secondary(void)
+{
+ early_init_this_mmu();
+}
+
+void setup_initial_memory_limit(phys_addr_t first_memblock_base,
+ phys_addr_t first_memblock_size)
+{
+ /* On non-FSL Embedded 64-bit, we adjust the RMA size to match
+ * the bolted TLB entry. We know for now that only 1G
+ * entries are supported though that may eventually
+ * change.
+ *
+ * on FSL Embedded 64-bit, usually all RAM is bolted, but with
+ * unusual memory sizes it's possible for some RAM to not be mapped
+ * (such RAM is not used at all by Linux, since we don't support
+ * highmem on 64-bit). We limit ppc64_rma_size to what would be
+ * mappable if this memblock is the only one. Additional memblocks
+ * can only increase, not decrease, the amount that ends up getting
+ * mapped. We still limit max to 1G even if we'll eventually map
+ * more. This is due to what the early init code is set up to do.
+ *
+ * We crop it to the size of the first MEMBLOCK to
+ * avoid going over total available memory just in case...
+ */
+#ifdef CONFIG_PPC_E500
+ if (early_mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
+ unsigned long linear_sz;
+ unsigned int num_cams;
+
+ /* use a quarter of the TLBCAM for bolted linear map */
+ num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4;
+
+ linear_sz = map_mem_in_cams(first_memblock_size, num_cams,
+ true, true);
+
+ ppc64_rma_size = min_t(u64, linear_sz, 0x40000000);
+ } else
+#endif
+ ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000);
+
+ /* Finally limit subsequent allocations */
+ memblock_set_current_limit(first_memblock_base + ppc64_rma_size);
+}
+#else /* ! CONFIG_PPC64 */
+void __init early_init_mmu(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (IS_ENABLED(CONFIG_PPC_47x) && IS_ENABLED(CONFIG_SMP) &&
+ of_get_flat_dt_prop(root, "cooperative-partition", NULL))
+ mmu_clear_feature(MMU_FTR_USE_TLBIVAX_BCAST);
+}
+#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/mm/nohash/tlb_low.S b/arch/powerpc/mm/nohash/tlb_low.S
new file mode 100644
index 0000000000..e1199608ff
--- /dev/null
+++ b/arch/powerpc/mm/nohash/tlb_low.S
@@ -0,0 +1,472 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * This file contains low-level functions for performing various
+ * types of TLB invalidations on various processors with no hash
+ * table.
+ *
+ * This file implements the following functions for all no-hash
+ * processors. Some aren't implemented for some variants. Some
+ * are inline in tlbflush.h
+ *
+ * - tlbil_va
+ * - tlbil_pid
+ * - tlbil_all
+ * - tlbivax_bcast
+ *
+ * Code mostly moved over from misc_32.S
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Partially rewritten by Cort Dougan (cort@cs.nmt.edu)
+ * Paul Mackerras, Kumar Gala and Benjamin Herrenschmidt.
+ */
+
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/mmu.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/processor.h>
+#include <asm/bug.h>
+#include <asm/asm-compat.h>
+#include <asm/feature-fixups.h>
+
+#if defined(CONFIG_40x)
+
+/*
+ * 40x implementation needs only tlbil_va
+ */
+_GLOBAL(__tlbil_va)
+ /* We run the search with interrupts disabled because we have to change
+ * the PID and I don't want to preempt when that happens.
+ */
+ mfmsr r5
+ mfspr r6,SPRN_PID
+ wrteei 0
+ mtspr SPRN_PID,r4
+ tlbsx. r3, 0, r3
+ mtspr SPRN_PID,r6
+ wrtee r5
+ bne 1f
+ sync
+ /* There are only 64 TLB entries, so r3 < 64, which means bit 25 is
+ * clear. Since 25 is the V bit in the TLB_TAG, loading this value
+ * will invalidate the TLB entry. */
+ tlbwe r3, r3, TLB_TAG
+ isync
+1: blr
+
+#elif defined(CONFIG_PPC_8xx)
+
+/*
+ * Nothing to do for 8xx, everything is inline
+ */
+
+#elif defined(CONFIG_44x) /* Includes 47x */
+
+/*
+ * 440 implementation uses tlbsx/we for tlbil_va and a full sweep
+ * of the TLB for everything else.
+ */
+_GLOBAL(__tlbil_va)
+ mfspr r5,SPRN_MMUCR
+ mfmsr r10
+
+ /*
+ * We write 16 bits of STID since 47x supports that much, we
+ * will never be passed out of bounds values on 440 (hopefully)
+ */
+ rlwimi r5,r4,0,16,31
+
+ /* We have to run the search with interrupts disabled, otherwise
+ * an interrupt which causes a TLB miss can clobber the MMUCR
+ * between the mtspr and the tlbsx.
+ *
+ * Critical and Machine Check interrupts take care of saving
+ * and restoring MMUCR, so only normal interrupts have to be
+ * taken care of.
+ */
+ wrteei 0
+ mtspr SPRN_MMUCR,r5
+ tlbsx. r6,0,r3
+ bne 10f
+ sync
+#ifndef CONFIG_PPC_47x
+ /* On 440 There are only 64 TLB entries, so r3 < 64, which means bit
+ * 22, is clear. Since 22 is the V bit in the TLB_PAGEID, loading this
+ * value will invalidate the TLB entry.
+ */
+ tlbwe r6,r6,PPC44x_TLB_PAGEID
+#else
+ oris r7,r6,0x8000 /* specify way explicitly */
+ clrrwi r4,r3,12 /* get an EPN for the hashing with V = 0 */
+ ori r4,r4,PPC47x_TLBE_SIZE
+ tlbwe r4,r7,0 /* write it */
+#endif /* !CONFIG_PPC_47x */
+ isync
+10: wrtee r10
+ blr
+
+_GLOBAL(_tlbil_all)
+_GLOBAL(_tlbil_pid)
+#ifndef CONFIG_PPC_47x
+ li r3,0
+ sync
+
+ /* Load high watermark */
+ lis r4,tlb_44x_hwater@ha
+ lwz r5,tlb_44x_hwater@l(r4)
+
+1: tlbwe r3,r3,PPC44x_TLB_PAGEID
+ addi r3,r3,1
+ cmpw 0,r3,r5
+ ble 1b
+
+ isync
+ blr
+#else
+ /* 476 variant. There's not simple way to do this, hopefully we'll
+ * try to limit the amount of such full invalidates
+ */
+ mfmsr r11 /* Interrupts off */
+ wrteei 0
+ li r3,-1 /* Current set */
+ lis r10,tlb_47x_boltmap@h
+ ori r10,r10,tlb_47x_boltmap@l
+ lis r7,0x8000 /* Specify way explicitly */
+
+ b 9f /* For each set */
+
+1: li r9,4 /* Number of ways */
+ li r4,0 /* Current way */
+ li r6,0 /* Default entry value 0 */
+ andi. r0,r8,1 /* Check if way 0 is bolted */
+ mtctr r9 /* Load way counter */
+ bne- 3f /* Bolted, skip loading it */
+
+2: /* For each way */
+ or r5,r3,r4 /* Make way|index for tlbre */
+ rlwimi r5,r5,16,8,15 /* Copy index into position */
+ tlbre r6,r5,0 /* Read entry */
+3: addis r4,r4,0x2000 /* Next way */
+ andi. r0,r6,PPC47x_TLB0_VALID /* Valid entry ? */
+ beq 4f /* Nope, skip it */
+ rlwimi r7,r5,0,1,2 /* Insert way number */
+ rlwinm r6,r6,0,21,19 /* Clear V */
+ tlbwe r6,r7,0 /* Write it */
+4: bdnz 2b /* Loop for each way */
+ srwi r8,r8,1 /* Next boltmap bit */
+9: cmpwi cr1,r3,255 /* Last set done ? */
+ addi r3,r3,1 /* Next set */
+ beq cr1,1f /* End of loop */
+ andi. r0,r3,0x1f /* Need to load a new boltmap word ? */
+ bne 1b /* No, loop */
+ lwz r8,0(r10) /* Load boltmap entry */
+ addi r10,r10,4 /* Next word */
+ b 1b /* Then loop */
+1: isync /* Sync shadows */
+ wrtee r11
+ blr
+#endif /* !CONFIG_PPC_47x */
+
+#ifdef CONFIG_PPC_47x
+
+/*
+ * _tlbivax_bcast is only on 47x. We don't bother doing a runtime
+ * check though, it will blow up soon enough if we mistakenly try
+ * to use it on a 440.
+ */
+_GLOBAL(_tlbivax_bcast)
+ mfspr r5,SPRN_MMUCR
+ mfmsr r10
+ rlwimi r5,r4,0,16,31
+ wrteei 0
+ mtspr SPRN_MMUCR,r5
+ isync
+ PPC_TLBIVAX(0, R3)
+ isync
+ mbar
+ tlbsync
+BEGIN_FTR_SECTION
+ b 1f
+END_FTR_SECTION_IFSET(CPU_FTR_476_DD2)
+ sync
+ wrtee r10
+ blr
+/*
+ * DD2 HW could hang if in instruction fetch happens before msync completes.
+ * Touch enough instruction cache lines to ensure cache hits
+ */
+1: mflr r9
+ bcl 20,31,$+4
+2: mflr r6
+ li r7,32
+ PPC_ICBT(0,R6,R7) /* touch next cache line */
+ add r6,r6,r7
+ PPC_ICBT(0,R6,R7) /* touch next cache line */
+ add r6,r6,r7
+ PPC_ICBT(0,R6,R7) /* touch next cache line */
+ sync
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ mtlr r9
+ wrtee r10
+ blr
+#endif /* CONFIG_PPC_47x */
+
+#elif defined(CONFIG_PPC_85xx)
+/*
+ * FSL BookE implementations.
+ *
+ * Since feature sections are using _SECTION_ELSE we need
+ * to have the larger code path before the _SECTION_ELSE
+ */
+
+/*
+ * Flush MMU TLB on the local processor
+ */
+_GLOBAL(_tlbil_all)
+BEGIN_MMU_FTR_SECTION
+ li r3,(MMUCSR0_TLBFI)@l
+ mtspr SPRN_MMUCSR0, r3
+1:
+ mfspr r3,SPRN_MMUCSR0
+ andi. r3,r3,MMUCSR0_TLBFI@l
+ bne 1b
+MMU_FTR_SECTION_ELSE
+ PPC_TLBILX_ALL(0,R0)
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
+ msync
+ isync
+ blr
+
+_GLOBAL(_tlbil_pid)
+BEGIN_MMU_FTR_SECTION
+ slwi r3,r3,16
+ mfmsr r10
+ wrteei 0
+ mfspr r4,SPRN_MAS6 /* save MAS6 */
+ mtspr SPRN_MAS6,r3
+ PPC_TLBILX_PID(0,R0)
+ mtspr SPRN_MAS6,r4 /* restore MAS6 */
+ wrtee r10
+MMU_FTR_SECTION_ELSE
+ li r3,(MMUCSR0_TLBFI)@l
+ mtspr SPRN_MMUCSR0, r3
+1:
+ mfspr r3,SPRN_MMUCSR0
+ andi. r3,r3,MMUCSR0_TLBFI@l
+ bne 1b
+ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBILX)
+ msync
+ isync
+ blr
+
+/*
+ * Flush MMU TLB for a particular address, but only on the local processor
+ * (no broadcast)
+ */
+_GLOBAL(__tlbil_va)
+ mfmsr r10
+ wrteei 0
+ slwi r4,r4,16
+ ori r4,r4,(MAS6_ISIZE(BOOK3E_PAGESZ_4K))@l
+ mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
+BEGIN_MMU_FTR_SECTION
+ tlbsx 0,r3
+ mfspr r4,SPRN_MAS1 /* check valid */
+ andis. r3,r4,MAS1_VALID@h
+ beq 1f
+ rlwinm r4,r4,0,1,31
+ mtspr SPRN_MAS1,r4
+ tlbwe
+MMU_FTR_SECTION_ELSE
+ PPC_TLBILX_VA(0,R3)
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
+ msync
+ isync
+1: wrtee r10
+ blr
+#elif defined(CONFIG_PPC_BOOK3E_64)
+/*
+ * New Book3E (>= 2.06) implementation
+ *
+ * Note: We may be able to get away without the interrupt masking stuff
+ * if we save/restore MAS6 on exceptions that might modify it
+ */
+_GLOBAL(_tlbil_pid)
+ slwi r4,r3,MAS6_SPID_SHIFT
+ mfmsr r10
+ wrteei 0
+ mtspr SPRN_MAS6,r4
+ PPC_TLBILX_PID(0,R0)
+ wrtee r10
+ msync
+ isync
+ blr
+
+_GLOBAL(_tlbil_pid_noind)
+ slwi r4,r3,MAS6_SPID_SHIFT
+ mfmsr r10
+ ori r4,r4,MAS6_SIND
+ wrteei 0
+ mtspr SPRN_MAS6,r4
+ PPC_TLBILX_PID(0,R0)
+ wrtee r10
+ msync
+ isync
+ blr
+
+_GLOBAL(_tlbil_all)
+ PPC_TLBILX_ALL(0,R0)
+ msync
+ isync
+ blr
+
+_GLOBAL(_tlbil_va)
+ mfmsr r10
+ wrteei 0
+ cmpwi cr0,r6,0
+ slwi r4,r4,MAS6_SPID_SHIFT
+ rlwimi r4,r5,MAS6_ISIZE_SHIFT,MAS6_ISIZE_MASK
+ beq 1f
+ rlwimi r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
+1: mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
+ PPC_TLBILX_VA(0,R3)
+ msync
+ isync
+ wrtee r10
+ blr
+
+_GLOBAL(_tlbivax_bcast)
+ mfmsr r10
+ wrteei 0
+ cmpwi cr0,r6,0
+ slwi r4,r4,MAS6_SPID_SHIFT
+ rlwimi r4,r5,MAS6_ISIZE_SHIFT,MAS6_ISIZE_MASK
+ beq 1f
+ rlwimi r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
+1: mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
+ PPC_TLBIVAX(0,R3)
+ mbar
+ tlbsync
+ sync
+ wrtee r10
+ blr
+#else
+#error Unsupported processor type !
+#endif
+
+#if defined(CONFIG_PPC_E500)
+/*
+ * extern void loadcam_entry(unsigned int index)
+ *
+ * Load TLBCAM[index] entry in to the L2 CAM MMU
+ * Must preserve r7, r8, r9, r10, r11, r12
+ */
+_GLOBAL(loadcam_entry)
+ mflr r5
+ LOAD_REG_ADDR_PIC(r4, TLBCAM)
+ mtlr r5
+ mulli r5,r3,TLBCAM_SIZE
+ add r3,r5,r4
+ lwz r4,TLBCAM_MAS0(r3)
+ mtspr SPRN_MAS0,r4
+ lwz r4,TLBCAM_MAS1(r3)
+ mtspr SPRN_MAS1,r4
+ PPC_LL r4,TLBCAM_MAS2(r3)
+ mtspr SPRN_MAS2,r4
+ lwz r4,TLBCAM_MAS3(r3)
+ mtspr SPRN_MAS3,r4
+BEGIN_MMU_FTR_SECTION
+ lwz r4,TLBCAM_MAS7(r3)
+ mtspr SPRN_MAS7,r4
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
+ isync
+ tlbwe
+ isync
+ blr
+
+/*
+ * Load multiple TLB entries at once, using an alternate-space
+ * trampoline so that we don't have to care about whether the same
+ * TLB entry maps us before and after.
+ *
+ * r3 = first entry to write
+ * r4 = number of entries to write
+ * r5 = temporary tlb entry (0 means no switch to AS1)
+ */
+_GLOBAL(loadcam_multi)
+ mflr r8
+ /* Don't switch to AS=1 if already there */
+ mfmsr r11
+ andi. r11,r11,MSR_IS
+ bne 10f
+ mr. r12, r5
+ beq 10f
+
+ /*
+ * Set up temporary TLB entry that is the same as what we're
+ * running from, but in AS=1.
+ */
+ bcl 20,31,$+4
+1: mflr r6
+ tlbsx 0,r8
+ mfspr r6,SPRN_MAS1
+ ori r6,r6,MAS1_TS
+ mtspr SPRN_MAS1,r6
+ mfspr r6,SPRN_MAS0
+ rlwimi r6,r5,MAS0_ESEL_SHIFT,MAS0_ESEL_MASK
+ mr r7,r5
+ mtspr SPRN_MAS0,r6
+ isync
+ tlbwe
+ isync
+
+ /* Switch to AS=1 */
+ mfmsr r6
+ ori r6,r6,MSR_IS|MSR_DS
+ mtmsr r6
+ isync
+
+10:
+ mr r9,r3
+ add r10,r3,r4
+2: bl loadcam_entry
+ addi r9,r9,1
+ cmpw r9,r10
+ mr r3,r9
+ blt 2b
+
+ /* Don't return to AS=0 if we were in AS=1 at function start */
+ andi. r11,r11,MSR_IS
+ bne 3f
+ cmpwi r12, 0
+ beq 3f
+
+ /* Return to AS=0 and clear the temporary entry */
+ mfmsr r6
+ rlwinm. r6,r6,0,~(MSR_IS|MSR_DS)
+ mtmsr r6
+ isync
+
+ li r6,0
+ mtspr SPRN_MAS1,r6
+ rlwinm r6,r7,MAS0_ESEL_SHIFT,MAS0_ESEL_MASK
+ oris r6,r6,MAS0_TLBSEL(1)@h
+ mtspr SPRN_MAS0,r6
+ isync
+ tlbwe
+ isync
+
+3:
+ mtlr r8
+ blr
+#endif
diff --git a/arch/powerpc/mm/nohash/tlb_low_64e.S b/arch/powerpc/mm/nohash/tlb_low_64e.S
new file mode 100644
index 0000000000..7e0b8fe1c2
--- /dev/null
+++ b/arch/powerpc/mm/nohash/tlb_low_64e.S
@@ -0,0 +1,1169 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Low level TLB miss handlers for Book3E
+ *
+ * Copyright (C) 2008-2009
+ * Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
+ */
+
+#include <linux/pgtable.h>
+#include <asm/processor.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cputable.h>
+#include <asm/exception-64e.h>
+#include <asm/ppc-opcode.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_booke_hv_asm.h>
+#include <asm/feature-fixups.h>
+
+#define VPTE_PMD_SHIFT (PTE_INDEX_SIZE)
+#define VPTE_PUD_SHIFT (VPTE_PMD_SHIFT + PMD_INDEX_SIZE)
+#define VPTE_PGD_SHIFT (VPTE_PUD_SHIFT + PUD_INDEX_SIZE)
+#define VPTE_INDEX_SIZE (VPTE_PGD_SHIFT + PGD_INDEX_SIZE)
+
+/**********************************************************************
+ * *
+ * TLB miss handling for Book3E with a bolted linear mapping *
+ * No virtual page table, no nested TLB misses *
+ * *
+ **********************************************************************/
+
+/*
+ * Note that, unlike non-bolted handlers, TLB_EXFRAME is not
+ * modified by the TLB miss handlers themselves, since the TLB miss
+ * handler code will not itself cause a recursive TLB miss.
+ *
+ * TLB_EXFRAME will be modified when crit/mc/debug exceptions are
+ * entered/exited.
+ */
+.macro tlb_prolog_bolted intnum addr
+ mtspr SPRN_SPRG_GEN_SCRATCH,r12
+ mfspr r12,SPRN_SPRG_TLB_EXFRAME
+ std r13,EX_TLB_R13(r12)
+ std r10,EX_TLB_R10(r12)
+ mfspr r13,SPRN_SPRG_PACA
+
+ mfcr r10
+ std r11,EX_TLB_R11(r12)
+#ifdef CONFIG_KVM_BOOKE_HV
+BEGIN_FTR_SECTION
+ mfspr r11, SPRN_SRR1
+END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
+#endif
+ DO_KVM \intnum, SPRN_SRR1
+ std r16,EX_TLB_R16(r12)
+ mfspr r16,\addr /* get faulting address */
+ std r14,EX_TLB_R14(r12)
+ ld r14,PACAPGD(r13)
+ std r15,EX_TLB_R15(r12)
+ std r10,EX_TLB_CR(r12)
+START_BTB_FLUSH_SECTION
+ mfspr r11, SPRN_SRR1
+ andi. r10,r11,MSR_PR
+ beq 1f
+ BTB_FLUSH(r10)
+1:
+END_BTB_FLUSH_SECTION
+ std r7,EX_TLB_R7(r12)
+.endm
+
+.macro tlb_epilog_bolted
+ ld r14,EX_TLB_CR(r12)
+ ld r7,EX_TLB_R7(r12)
+ ld r10,EX_TLB_R10(r12)
+ ld r11,EX_TLB_R11(r12)
+ ld r13,EX_TLB_R13(r12)
+ mtcr r14
+ ld r14,EX_TLB_R14(r12)
+ ld r15,EX_TLB_R15(r12)
+ ld r16,EX_TLB_R16(r12)
+ mfspr r12,SPRN_SPRG_GEN_SCRATCH
+.endm
+
+/* Data TLB miss */
+ START_EXCEPTION(data_tlb_miss_bolted)
+ tlb_prolog_bolted BOOKE_INTERRUPT_DTLB_MISS SPRN_DEAR
+
+ /* We need _PAGE_PRESENT and _PAGE_ACCESSED set */
+
+ /* We do the user/kernel test for the PID here along with the RW test
+ */
+ /* We pre-test some combination of permissions to avoid double
+ * faults:
+ *
+ * We move the ESR:ST bit into the position of _PAGE_BAP_SW in the PTE
+ * ESR_ST is 0x00800000
+ * _PAGE_BAP_SW is 0x00000010
+ * So the shift is >> 19. This tests for supervisor writeability.
+ * If the page happens to be supervisor writeable and not user
+ * writeable, we will take a new fault later, but that should be
+ * a rare enough case.
+ *
+ * We also move ESR_ST in _PAGE_DIRTY position
+ * _PAGE_DIRTY is 0x00001000 so the shift is >> 11
+ *
+ * MAS1 is preset for all we need except for TID that needs to
+ * be cleared for kernel translations
+ */
+
+ mfspr r11,SPRN_ESR
+
+ srdi r15,r16,60 /* get region */
+ rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
+ bne- dtlb_miss_fault_bolted /* Bail if fault addr is invalid */
+
+ rlwinm r10,r11,32-19,27,27
+ rlwimi r10,r11,32-16,19,19
+ cmpwi r15,0 /* user vs kernel check */
+ ori r10,r10,_PAGE_PRESENT
+ oris r11,r10,_PAGE_ACCESSED@h
+
+ bne tlb_miss_kernel_bolted
+
+tlb_miss_user_bolted:
+#ifdef CONFIG_PPC_KUAP
+ mfspr r10,SPRN_MAS1
+ rlwinm. r10,r10,0,0x3fff0000
+ beq- tlb_miss_fault_bolted /* KUAP fault */
+#endif
+
+tlb_miss_common_bolted:
+/*
+ * This is the guts of the TLB miss handler for bolted-linear.
+ * We are entered with:
+ *
+ * r16 = faulting address
+ * r15 = crap (free to use)
+ * r14 = page table base
+ * r13 = PACA
+ * r11 = PTE permission mask
+ * r10 = crap (free to use)
+ */
+ rldicl r15,r16,64-PGDIR_SHIFT+3,64-PGD_INDEX_SIZE-3
+ cmpldi cr0,r14,0
+ clrrdi r15,r15,3
+ beq tlb_miss_fault_bolted /* No PGDIR, bail */
+
+ ldx r14,r14,r15 /* grab pgd entry */
+
+ rldicl r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3
+ clrrdi r15,r15,3
+ cmpdi cr0,r14,0
+ bge tlb_miss_fault_bolted /* Bad pgd entry or hugepage; bail */
+ ldx r14,r14,r15 /* grab pud entry */
+
+ rldicl r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3
+ clrrdi r15,r15,3
+ cmpdi cr0,r14,0
+ bge tlb_miss_fault_bolted
+ ldx r14,r14,r15 /* Grab pmd entry */
+
+ rldicl r15,r16,64-PAGE_SHIFT+3,64-PTE_INDEX_SIZE-3
+ clrrdi r15,r15,3
+ cmpdi cr0,r14,0
+ bge tlb_miss_fault_bolted
+ ldx r14,r14,r15 /* Grab PTE, normal (!huge) page */
+
+ /* Check if required permissions are met */
+ andc. r15,r11,r14
+ rldicr r15,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT
+ bne- tlb_miss_fault_bolted
+
+ /* Now we build the MAS:
+ *
+ * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG
+ * MAS 1 : Almost fully setup
+ * - PID already updated by caller if necessary
+ * - TSIZE need change if !base page size, not
+ * yet implemented for now
+ * MAS 2 : Defaults not useful, need to be redone
+ * MAS 3+7 : Needs to be done
+ */
+ clrrdi r11,r16,12 /* Clear low crap in EA */
+ clrldi r15,r15,12 /* Clear crap at the top */
+ rlwimi r11,r14,32-19,27,31 /* Insert WIMGE */
+ rlwimi r15,r14,32-8,22,25 /* Move in U bits */
+ mtspr SPRN_MAS2,r11
+ andi. r11,r14,_PAGE_DIRTY
+ rlwimi r15,r14,32-2,26,31 /* Move in BAP bits */
+
+ /* Mask out SW and UW if !DIRTY (XXX optimize this !) */
+ bne 1f
+ li r11,MAS3_SW|MAS3_UW
+ andc r15,r15,r11
+1:
+ mtspr SPRN_MAS7_MAS3,r15
+ tlbwe
+
+tlb_miss_done_bolted:
+ tlb_epilog_bolted
+ rfi
+
+itlb_miss_kernel_bolted:
+ li r11,_PAGE_PRESENT|_PAGE_BAP_SX /* Base perm */
+ oris r11,r11,_PAGE_ACCESSED@h
+tlb_miss_kernel_bolted:
+ mfspr r10,SPRN_MAS1
+ ld r14,PACA_KERNELPGD(r13)
+ srdi r15,r16,44 /* get kernel region */
+ andi. r15,r15,1 /* Check for vmalloc region */
+ rlwinm r10,r10,0,16,1 /* Clear TID */
+ mtspr SPRN_MAS1,r10
+ bne+ tlb_miss_common_bolted
+
+tlb_miss_fault_bolted:
+ /* We need to check if it was an instruction miss */
+ andi. r10,r11,_PAGE_BAP_UX|_PAGE_BAP_SX
+ bne itlb_miss_fault_bolted
+dtlb_miss_fault_bolted:
+ tlb_epilog_bolted
+ b exc_data_storage_book3e
+itlb_miss_fault_bolted:
+ tlb_epilog_bolted
+ b exc_instruction_storage_book3e
+
+/* Instruction TLB miss */
+ START_EXCEPTION(instruction_tlb_miss_bolted)
+ tlb_prolog_bolted BOOKE_INTERRUPT_ITLB_MISS SPRN_SRR0
+
+ rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
+ srdi r15,r16,60 /* get region */
+ bne- itlb_miss_fault_bolted
+
+ li r11,_PAGE_PRESENT|_PAGE_BAP_UX /* Base perm */
+
+ /* We do the user/kernel test for the PID here along with the RW test
+ */
+
+ cmpldi cr0,r15,0 /* Check for user region */
+ oris r11,r11,_PAGE_ACCESSED@h
+ beq tlb_miss_user_bolted
+ b itlb_miss_kernel_bolted
+
+/*
+ * TLB miss handling for e6500 and derivatives, using hardware tablewalk.
+ *
+ * Linear mapping is bolted: no virtual page table or nested TLB misses
+ * Indirect entries in TLB1, hardware loads resulting direct entries
+ * into TLB0
+ * No HES or NV hint on TLB1, so we need to do software round-robin
+ * No tlbsrx. so we need a spinlock, and we have to deal
+ * with MAS-damage caused by tlbsx
+ * 4K pages only
+ */
+
+ START_EXCEPTION(instruction_tlb_miss_e6500)
+ tlb_prolog_bolted BOOKE_INTERRUPT_ITLB_MISS SPRN_SRR0
+
+ ld r11,PACA_TCD_PTR(r13)
+ srdi. r15,r16,60 /* get region */
+ ori r16,r16,1
+
+ bne tlb_miss_kernel_e6500 /* user/kernel test */
+
+ b tlb_miss_common_e6500
+
+ START_EXCEPTION(data_tlb_miss_e6500)
+ tlb_prolog_bolted BOOKE_INTERRUPT_DTLB_MISS SPRN_DEAR
+
+ ld r11,PACA_TCD_PTR(r13)
+ srdi. r15,r16,60 /* get region */
+ rldicr r16,r16,0,62
+
+ bne tlb_miss_kernel_e6500 /* user vs kernel check */
+
+/*
+ * This is the guts of the TLB miss handler for e6500 and derivatives.
+ * We are entered with:
+ *
+ * r16 = page of faulting address (low bit 0 if data, 1 if instruction)
+ * r15 = crap (free to use)
+ * r14 = page table base
+ * r13 = PACA
+ * r11 = tlb_per_core ptr
+ * r10 = crap (free to use)
+ * r7 = esel_next
+ */
+tlb_miss_common_e6500:
+ crmove cr2*4+2,cr0*4+2 /* cr2.eq != 0 if kernel address */
+
+BEGIN_FTR_SECTION /* CPU_FTR_SMT */
+ /*
+ * Search if we already have an indirect entry for that virtual
+ * address, and if we do, bail out.
+ *
+ * MAS6:IND should be already set based on MAS4
+ */
+ lhz r10,PACAPACAINDEX(r13)
+ addi r10,r10,1
+ crclr cr1*4+eq /* set cr1.eq = 0 for non-recursive */
+1: lbarx r15,0,r11
+ cmpdi r15,0
+ bne 2f
+ stbcx. r10,0,r11
+ bne 1b
+3:
+ .subsection 1
+2: cmpd cr1,r15,r10 /* recursive lock due to mcheck/crit/etc? */
+ beq cr1,3b /* unlock will happen if cr1.eq = 0 */
+10: lbz r15,0(r11)
+ cmpdi r15,0
+ bne 10b
+ b 1b
+ .previous
+END_FTR_SECTION_IFSET(CPU_FTR_SMT)
+
+ lbz r7,TCD_ESEL_NEXT(r11)
+
+BEGIN_FTR_SECTION /* CPU_FTR_SMT */
+ /*
+ * Erratum A-008139 says that we can't use tlbwe to change
+ * an indirect entry in any way (including replacing or
+ * invalidating) if the other thread could be in the process
+ * of a lookup. The workaround is to invalidate the entry
+ * with tlbilx before overwriting.
+ */
+
+ rlwinm r10,r7,16,0xff0000
+ oris r10,r10,MAS0_TLBSEL(1)@h
+ mtspr SPRN_MAS0,r10
+ isync
+ tlbre
+ mfspr r15,SPRN_MAS1
+ andis. r15,r15,MAS1_VALID@h
+ beq 5f
+
+BEGIN_FTR_SECTION_NESTED(532)
+ mfspr r10,SPRN_MAS8
+ rlwinm r10,r10,0,0x80000fff /* tgs,tlpid -> sgs,slpid */
+ mtspr SPRN_MAS5,r10
+END_FTR_SECTION_NESTED(CPU_FTR_EMB_HV,CPU_FTR_EMB_HV,532)
+
+ mfspr r10,SPRN_MAS1
+ rlwinm r15,r10,0,0x3fff0000 /* tid -> spid */
+ rlwimi r15,r10,20,0x00000003 /* ind,ts -> sind,sas */
+ mfspr r10,SPRN_MAS6
+ mtspr SPRN_MAS6,r15
+
+ mfspr r15,SPRN_MAS2
+ isync
+ PPC_TLBILX_VA(0,R15)
+ isync
+
+ mtspr SPRN_MAS6,r10
+
+5:
+BEGIN_FTR_SECTION_NESTED(532)
+ li r10,0
+ mtspr SPRN_MAS8,r10
+ mtspr SPRN_MAS5,r10
+END_FTR_SECTION_NESTED(CPU_FTR_EMB_HV,CPU_FTR_EMB_HV,532)
+
+ tlbsx 0,r16
+ mfspr r10,SPRN_MAS1
+ andis. r15,r10,MAS1_VALID@h
+ bne tlb_miss_done_e6500
+FTR_SECTION_ELSE
+ mfspr r10,SPRN_MAS1
+ALT_FTR_SECTION_END_IFSET(CPU_FTR_SMT)
+
+ oris r10,r10,MAS1_VALID@h
+ beq cr2,4f
+ rlwinm r10,r10,0,16,1 /* Clear TID */
+4: mtspr SPRN_MAS1,r10
+
+ /* Now, we need to walk the page tables. First check if we are in
+ * range.
+ */
+ rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
+ bne- tlb_miss_fault_e6500
+
+ rldicl r15,r16,64-PGDIR_SHIFT+3,64-PGD_INDEX_SIZE-3
+ cmpldi cr0,r14,0
+ clrrdi r15,r15,3
+ beq- tlb_miss_fault_e6500 /* No PGDIR, bail */
+ ldx r14,r14,r15 /* grab pgd entry */
+
+ rldicl r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3
+ clrrdi r15,r15,3
+ cmpdi cr0,r14,0
+ bge tlb_miss_huge_e6500 /* Bad pgd entry or hugepage; bail */
+ ldx r14,r14,r15 /* grab pud entry */
+
+ rldicl r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3
+ clrrdi r15,r15,3
+ cmpdi cr0,r14,0
+ bge tlb_miss_huge_e6500
+ ldx r14,r14,r15 /* Grab pmd entry */
+
+ mfspr r10,SPRN_MAS0
+ cmpdi cr0,r14,0
+ bge tlb_miss_huge_e6500
+
+ /* Now we build the MAS for a 2M indirect page:
+ *
+ * MAS 0 : ESEL needs to be filled by software round-robin
+ * MAS 1 : Fully set up
+ * - PID already updated by caller if necessary
+ * - TSIZE for now is base ind page size always
+ * - TID already cleared if necessary
+ * MAS 2 : Default not 2M-aligned, need to be redone
+ * MAS 3+7 : Needs to be done
+ */
+
+ ori r14,r14,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT)
+ mtspr SPRN_MAS7_MAS3,r14
+
+ clrrdi r15,r16,21 /* make EA 2M-aligned */
+ mtspr SPRN_MAS2,r15
+
+tlb_miss_huge_done_e6500:
+ lbz r16,TCD_ESEL_MAX(r11)
+ lbz r14,TCD_ESEL_FIRST(r11)
+ rlwimi r10,r7,16,0x00ff0000 /* insert esel_next into MAS0 */
+ addi r7,r7,1 /* increment esel_next */
+ mtspr SPRN_MAS0,r10
+ cmpw r7,r16
+ iseleq r7,r14,r7 /* if next == last use first */
+ stb r7,TCD_ESEL_NEXT(r11)
+
+ tlbwe
+
+tlb_miss_done_e6500:
+ .macro tlb_unlock_e6500
+BEGIN_FTR_SECTION
+ beq cr1,1f /* no unlock if lock was recursively grabbed */
+ li r15,0
+ isync
+ stb r15,0(r11)
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_SMT)
+ .endm
+
+ tlb_unlock_e6500
+ tlb_epilog_bolted
+ rfi
+
+tlb_miss_huge_e6500:
+ beq tlb_miss_fault_e6500
+ li r10,1
+ andi. r15,r14,HUGEPD_SHIFT_MASK@l /* r15 = psize */
+ rldimi r14,r10,63,0 /* Set PD_HUGE */
+ xor r14,r14,r15 /* Clear size bits */
+ ldx r14,0,r14
+
+ /*
+ * Now we build the MAS for a huge page.
+ *
+ * MAS 0 : ESEL needs to be filled by software round-robin
+ * - can be handled by indirect code
+ * MAS 1 : Need to clear IND and set TSIZE
+ * MAS 2,3+7: Needs to be redone similar to non-tablewalk handler
+ */
+
+ subi r15,r15,10 /* Convert psize to tsize */
+ mfspr r10,SPRN_MAS1
+ rlwinm r10,r10,0,~MAS1_IND
+ rlwimi r10,r15,MAS1_TSIZE_SHIFT,MAS1_TSIZE_MASK
+ mtspr SPRN_MAS1,r10
+
+ li r10,-0x400
+ sld r15,r10,r15 /* Generate mask based on size */
+ and r10,r16,r15
+ rldicr r15,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT
+ rlwimi r10,r14,32-19,27,31 /* Insert WIMGE */
+ clrldi r15,r15,PAGE_SHIFT /* Clear crap at the top */
+ rlwimi r15,r14,32-8,22,25 /* Move in U bits */
+ mtspr SPRN_MAS2,r10
+ andi. r10,r14,_PAGE_DIRTY
+ rlwimi r15,r14,32-2,26,31 /* Move in BAP bits */
+
+ /* Mask out SW and UW if !DIRTY (XXX optimize this !) */
+ bne 1f
+ li r10,MAS3_SW|MAS3_UW
+ andc r15,r15,r10
+1:
+ mtspr SPRN_MAS7_MAS3,r15
+
+ mfspr r10,SPRN_MAS0
+ b tlb_miss_huge_done_e6500
+
+tlb_miss_kernel_e6500:
+ ld r14,PACA_KERNELPGD(r13)
+ srdi r15,r16,44 /* get kernel region */
+ xoris r15,r15,0xc /* Check for vmalloc region */
+ cmplwi cr1,r15,1
+ beq+ cr1,tlb_miss_common_e6500
+
+tlb_miss_fault_e6500:
+ tlb_unlock_e6500
+ /* We need to check if it was an instruction miss */
+ andi. r16,r16,1
+ bne itlb_miss_fault_e6500
+dtlb_miss_fault_e6500:
+ tlb_epilog_bolted
+ b exc_data_storage_book3e
+itlb_miss_fault_e6500:
+ tlb_epilog_bolted
+ b exc_instruction_storage_book3e
+
+/**********************************************************************
+ * *
+ * TLB miss handling for Book3E with TLB reservation and HES support *
+ * *
+ **********************************************************************/
+
+
+/* Data TLB miss */
+ START_EXCEPTION(data_tlb_miss)
+ TLB_MISS_PROLOG
+
+ /* Now we handle the fault proper. We only save DEAR in normal
+ * fault case since that's the only interesting values here.
+ * We could probably also optimize by not saving SRR0/1 in the
+ * linear mapping case but I'll leave that for later
+ */
+ mfspr r14,SPRN_ESR
+ mfspr r16,SPRN_DEAR /* get faulting address */
+ srdi r15,r16,44 /* get region */
+ xoris r15,r15,0xc
+ cmpldi cr0,r15,0 /* linear mapping ? */
+ beq tlb_load_linear /* yes -> go to linear map load */
+ cmpldi cr1,r15,1 /* vmalloc mapping ? */
+
+ /* The page tables are mapped virtually linear. At this point, though,
+ * we don't know whether we are trying to fault in a first level
+ * virtual address or a virtual page table address. We can get that
+ * from bit 0x1 of the region ID which we have set for a page table
+ */
+ andis. r10,r15,0x1
+ bne- virt_page_table_tlb_miss
+
+ std r14,EX_TLB_ESR(r12); /* save ESR */
+ std r16,EX_TLB_DEAR(r12); /* save DEAR */
+
+ /* We need _PAGE_PRESENT and _PAGE_ACCESSED set */
+ li r11,_PAGE_PRESENT
+ oris r11,r11,_PAGE_ACCESSED@h
+
+ /* We do the user/kernel test for the PID here along with the RW test
+ */
+ srdi. r15,r16,60 /* Check for user region */
+
+ /* We pre-test some combination of permissions to avoid double
+ * faults:
+ *
+ * We move the ESR:ST bit into the position of _PAGE_BAP_SW in the PTE
+ * ESR_ST is 0x00800000
+ * _PAGE_BAP_SW is 0x00000010
+ * So the shift is >> 19. This tests for supervisor writeability.
+ * If the page happens to be supervisor writeable and not user
+ * writeable, we will take a new fault later, but that should be
+ * a rare enough case.
+ *
+ * We also move ESR_ST in _PAGE_DIRTY position
+ * _PAGE_DIRTY is 0x00001000 so the shift is >> 11
+ *
+ * MAS1 is preset for all we need except for TID that needs to
+ * be cleared for kernel translations
+ */
+ rlwimi r11,r14,32-19,27,27
+ rlwimi r11,r14,32-16,19,19
+ beq normal_tlb_miss_user
+ /* XXX replace the RMW cycles with immediate loads + writes */
+1: mfspr r10,SPRN_MAS1
+ rlwinm r10,r10,0,16,1 /* Clear TID */
+ mtspr SPRN_MAS1,r10
+ beq+ cr1,normal_tlb_miss
+
+ /* We got a crappy address, just fault with whatever DEAR and ESR
+ * are here
+ */
+ TLB_MISS_EPILOG_ERROR
+ b exc_data_storage_book3e
+
+/* Instruction TLB miss */
+ START_EXCEPTION(instruction_tlb_miss)
+ TLB_MISS_PROLOG
+
+ /* If we take a recursive fault, the second level handler may need
+ * to know whether we are handling a data or instruction fault in
+ * order to get to the right store fault handler. We provide that
+ * info by writing a crazy value in ESR in our exception frame
+ */
+ li r14,-1 /* store to exception frame is done later */
+
+ /* Now we handle the fault proper. We only save DEAR in the non
+ * linear mapping case since we know the linear mapping case will
+ * not re-enter. We could indeed optimize and also not save SRR0/1
+ * in the linear mapping case but I'll leave that for later
+ *
+ * Faulting address is SRR0 which is already in r16
+ */
+ srdi r15,r16,44 /* get region */
+ xoris r15,r15,0xc
+ cmpldi cr0,r15,0 /* linear mapping ? */
+ beq tlb_load_linear /* yes -> go to linear map load */
+ cmpldi cr1,r15,1 /* vmalloc mapping ? */
+
+ /* We do the user/kernel test for the PID here along with the RW test
+ */
+ li r11,_PAGE_PRESENT|_PAGE_BAP_UX /* Base perm */
+ oris r11,r11,_PAGE_ACCESSED@h
+
+ srdi. r15,r16,60 /* Check for user region */
+ std r14,EX_TLB_ESR(r12) /* write crazy -1 to frame */
+ beq normal_tlb_miss_user
+
+ li r11,_PAGE_PRESENT|_PAGE_BAP_SX /* Base perm */
+ oris r11,r11,_PAGE_ACCESSED@h
+ /* XXX replace the RMW cycles with immediate loads + writes */
+ mfspr r10,SPRN_MAS1
+ rlwinm r10,r10,0,16,1 /* Clear TID */
+ mtspr SPRN_MAS1,r10
+ beq+ cr1,normal_tlb_miss
+
+ /* We got a crappy address, just fault */
+ TLB_MISS_EPILOG_ERROR
+ b exc_instruction_storage_book3e
+
+/*
+ * This is the guts of the first-level TLB miss handler for direct
+ * misses. We are entered with:
+ *
+ * r16 = faulting address
+ * r15 = region ID
+ * r14 = crap (free to use)
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = PTE permission mask
+ * r10 = crap (free to use)
+ */
+normal_tlb_miss_user:
+#ifdef CONFIG_PPC_KUAP
+ mfspr r14,SPRN_MAS1
+ rlwinm. r14,r14,0,0x3fff0000
+ beq- normal_tlb_miss_access_fault /* KUAP fault */
+#endif
+normal_tlb_miss:
+ /* So we first construct the page table address. We do that by
+ * shifting the bottom of the address (not the region ID) by
+ * PAGE_SHIFT-3, clearing the bottom 3 bits (get a PTE ptr) and
+ * or'ing the fourth high bit.
+ *
+ * NOTE: For 64K pages, we do things slightly differently in
+ * order to handle the weird page table format used by linux
+ */
+ srdi r15,r16,44
+ oris r10,r15,0x1
+ rldicl r14,r16,64-(PAGE_SHIFT-3),PAGE_SHIFT-3+4
+ sldi r15,r10,44
+ clrrdi r14,r14,19
+ or r10,r15,r14
+
+ ld r14,0(r10)
+
+finish_normal_tlb_miss:
+ /* Check if required permissions are met */
+ andc. r15,r11,r14
+ bne- normal_tlb_miss_access_fault
+
+ /* Now we build the MAS:
+ *
+ * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG
+ * MAS 1 : Almost fully setup
+ * - PID already updated by caller if necessary
+ * - TSIZE need change if !base page size, not
+ * yet implemented for now
+ * MAS 2 : Defaults not useful, need to be redone
+ * MAS 3+7 : Needs to be done
+ *
+ * TODO: mix up code below for better scheduling
+ */
+ clrrdi r10,r16,12 /* Clear low crap in EA */
+ rlwimi r10,r14,32-19,27,31 /* Insert WIMGE */
+ mtspr SPRN_MAS2,r10
+
+ /* Check page size, if not standard, update MAS1 */
+ rldicl r10,r14,64-8,64-8
+ cmpldi cr0,r10,BOOK3E_PAGESZ_4K
+ beq- 1f
+ mfspr r11,SPRN_MAS1
+ rlwimi r11,r14,31,21,24
+ rlwinm r11,r11,0,21,19
+ mtspr SPRN_MAS1,r11
+1:
+ /* Move RPN in position */
+ rldicr r11,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT
+ clrldi r15,r11,12 /* Clear crap at the top */
+ rlwimi r15,r14,32-8,22,25 /* Move in U bits */
+ rlwimi r15,r14,32-2,26,31 /* Move in BAP bits */
+
+ /* Mask out SW and UW if !DIRTY (XXX optimize this !) */
+ andi. r11,r14,_PAGE_DIRTY
+ bne 1f
+ li r11,MAS3_SW|MAS3_UW
+ andc r15,r15,r11
+1:
+ srdi r16,r15,32
+ mtspr SPRN_MAS3,r15
+ mtspr SPRN_MAS7,r16
+
+ tlbwe
+
+normal_tlb_miss_done:
+ /* We don't bother with restoring DEAR or ESR since we know we are
+ * level 0 and just going back to userland. They are only needed
+ * if you are going to take an access fault
+ */
+ TLB_MISS_EPILOG_SUCCESS
+ rfi
+
+normal_tlb_miss_access_fault:
+ /* We need to check if it was an instruction miss */
+ andi. r10,r11,_PAGE_BAP_UX
+ bne 1f
+ ld r14,EX_TLB_DEAR(r12)
+ ld r15,EX_TLB_ESR(r12)
+ mtspr SPRN_DEAR,r14
+ mtspr SPRN_ESR,r15
+ TLB_MISS_EPILOG_ERROR
+ b exc_data_storage_book3e
+1: TLB_MISS_EPILOG_ERROR
+ b exc_instruction_storage_book3e
+
+
+/*
+ * This is the guts of the second-level TLB miss handler for direct
+ * misses. We are entered with:
+ *
+ * r16 = virtual page table faulting address
+ * r15 = region (top 4 bits of address)
+ * r14 = crap (free to use)
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = crap (free to use)
+ * r10 = crap (free to use)
+ *
+ * Note that this should only ever be called as a second level handler
+ * with the current scheme when using SW load.
+ * That means we can always get the original fault DEAR at
+ * EX_TLB_DEAR-EX_TLB_SIZE(r12)
+ *
+ * It can be re-entered by the linear mapping miss handler. However, to
+ * avoid too much complication, it will restart the whole fault at level
+ * 0 so we don't care too much about clobbers
+ *
+ * XXX That code was written back when we couldn't clobber r14. We can now,
+ * so we could probably optimize things a bit
+ */
+virt_page_table_tlb_miss:
+ /* Are we hitting a kernel page table ? */
+ srdi r15,r16,60
+ andi. r10,r15,0x8
+
+ /* The cool thing now is that r10 contains 0 for user and 8 for kernel,
+ * and we happen to have the swapper_pg_dir at offset 8 from the user
+ * pgdir in the PACA :-).
+ */
+ add r11,r10,r13
+
+ /* If kernel, we need to clear MAS1 TID */
+ beq 1f
+ /* XXX replace the RMW cycles with immediate loads + writes */
+ mfspr r10,SPRN_MAS1
+ rlwinm r10,r10,0,16,1 /* Clear TID */
+ mtspr SPRN_MAS1,r10
+#ifdef CONFIG_PPC_KUAP
+ b 2f
+1:
+ mfspr r10,SPRN_MAS1
+ rlwinm. r10,r10,0,0x3fff0000
+ beq- virt_page_table_tlb_miss_fault /* KUAP fault */
+2:
+#else
+1:
+#endif
+
+ /* Now, we need to walk the page tables. First check if we are in
+ * range.
+ */
+ rldicl r10,r16,64-(VPTE_INDEX_SIZE+3),VPTE_INDEX_SIZE+3+4
+ cmpldi r10,0x80
+ bne- virt_page_table_tlb_miss_fault
+
+ /* Get the PGD pointer */
+ ld r15,PACAPGD(r11)
+ cmpldi cr0,r15,0
+ beq- virt_page_table_tlb_miss_fault
+
+ /* Get to PGD entry */
+ rldicl r11,r16,64-VPTE_PGD_SHIFT,64-PGD_INDEX_SIZE-3
+ clrrdi r10,r11,3
+ ldx r15,r10,r15
+ cmpdi cr0,r15,0
+ bge virt_page_table_tlb_miss_fault
+
+ /* Get to PUD entry */
+ rldicl r11,r16,64-VPTE_PUD_SHIFT,64-PUD_INDEX_SIZE-3
+ clrrdi r10,r11,3
+ ldx r15,r10,r15
+ cmpdi cr0,r15,0
+ bge virt_page_table_tlb_miss_fault
+
+ /* Get to PMD entry */
+ rldicl r11,r16,64-VPTE_PMD_SHIFT,64-PMD_INDEX_SIZE-3
+ clrrdi r10,r11,3
+ ldx r15,r10,r15
+ cmpdi cr0,r15,0
+ bge virt_page_table_tlb_miss_fault
+
+ /* Ok, we're all right, we can now create a kernel translation for
+ * a 4K or 64K page from r16 -> r15.
+ */
+ /* Now we build the MAS:
+ *
+ * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG
+ * MAS 1 : Almost fully setup
+ * - PID already updated by caller if necessary
+ * - TSIZE for now is base page size always
+ * MAS 2 : Use defaults
+ * MAS 3+7 : Needs to be done
+ *
+ * So we only do MAS 2 and 3 for now...
+ */
+ clrldi r11,r15,4 /* remove region ID from RPN */
+ ori r10,r11,1 /* Or-in SR */
+
+ srdi r16,r10,32
+ mtspr SPRN_MAS3,r10
+ mtspr SPRN_MAS7,r16
+
+ tlbwe
+
+ /* Return to caller, normal case */
+ TLB_MISS_EPILOG_SUCCESS
+ rfi
+
+virt_page_table_tlb_miss_fault:
+ /* If we fault here, things are a little bit tricky. We need to call
+ * either data or instruction store fault, and we need to retrieve
+ * the original fault address and ESR (for data).
+ *
+ * The thing is, we know that in normal circumstances, this is
+ * always called as a second level tlb miss for SW load or as a first
+ * level TLB miss for HW load, so we should be able to peek at the
+ * relevant information in the first exception frame in the PACA.
+ *
+ * However, we do need to double check that, because we may just hit
+ * a stray kernel pointer or a userland attack trying to hit those
+ * areas. If that is the case, we do a data fault. (We can't get here
+ * from an instruction tlb miss anyway).
+ *
+ * Note also that when going to a fault, we must unwind the previous
+ * level as well. Since we are doing that, we don't need to clear or
+ * restore the TLB reservation neither.
+ */
+ subf r10,r13,r12
+ cmpldi cr0,r10,PACA_EXTLB+EX_TLB_SIZE
+ bne- virt_page_table_tlb_miss_whacko_fault
+
+ /* We dig the original DEAR and ESR from slot 0 */
+ ld r15,EX_TLB_DEAR+PACA_EXTLB(r13)
+ ld r16,EX_TLB_ESR+PACA_EXTLB(r13)
+
+ /* We check for the "special" ESR value for instruction faults */
+ cmpdi cr0,r16,-1
+ beq 1f
+ mtspr SPRN_DEAR,r15
+ mtspr SPRN_ESR,r16
+ TLB_MISS_EPILOG_ERROR
+ b exc_data_storage_book3e
+1: TLB_MISS_EPILOG_ERROR
+ b exc_instruction_storage_book3e
+
+virt_page_table_tlb_miss_whacko_fault:
+ /* The linear fault will restart everything so ESR and DEAR will
+ * not have been clobbered, let's just fault with what we have
+ */
+ TLB_MISS_EPILOG_ERROR
+ b exc_data_storage_book3e
+
+
+/**************************************************************
+ * *
+ * TLB miss handling for Book3E with hw page table support *
+ * *
+ **************************************************************/
+
+
+/* Data TLB miss */
+ START_EXCEPTION(data_tlb_miss_htw)
+ TLB_MISS_PROLOG
+
+ /* Now we handle the fault proper. We only save DEAR in normal
+ * fault case since that's the only interesting values here.
+ * We could probably also optimize by not saving SRR0/1 in the
+ * linear mapping case but I'll leave that for later
+ */
+ mfspr r14,SPRN_ESR
+ mfspr r16,SPRN_DEAR /* get faulting address */
+ srdi r11,r16,44 /* get region */
+ xoris r11,r11,0xc
+ cmpldi cr0,r11,0 /* linear mapping ? */
+ beq tlb_load_linear /* yes -> go to linear map load */
+ cmpldi cr1,r11,1 /* vmalloc mapping ? */
+
+ /* We do the user/kernel test for the PID here along with the RW test
+ */
+ srdi. r11,r16,60 /* Check for user region */
+ ld r15,PACAPGD(r13) /* Load user pgdir */
+ beq htw_tlb_miss
+
+ /* XXX replace the RMW cycles with immediate loads + writes */
+1: mfspr r10,SPRN_MAS1
+ rlwinm r10,r10,0,16,1 /* Clear TID */
+ mtspr SPRN_MAS1,r10
+ ld r15,PACA_KERNELPGD(r13) /* Load kernel pgdir */
+ beq+ cr1,htw_tlb_miss
+
+ /* We got a crappy address, just fault with whatever DEAR and ESR
+ * are here
+ */
+ TLB_MISS_EPILOG_ERROR
+ b exc_data_storage_book3e
+
+/* Instruction TLB miss */
+ START_EXCEPTION(instruction_tlb_miss_htw)
+ TLB_MISS_PROLOG
+
+ /* If we take a recursive fault, the second level handler may need
+ * to know whether we are handling a data or instruction fault in
+ * order to get to the right store fault handler. We provide that
+ * info by keeping a crazy value for ESR in r14
+ */
+ li r14,-1 /* store to exception frame is done later */
+
+ /* Now we handle the fault proper. We only save DEAR in the non
+ * linear mapping case since we know the linear mapping case will
+ * not re-enter. We could indeed optimize and also not save SRR0/1
+ * in the linear mapping case but I'll leave that for later
+ *
+ * Faulting address is SRR0 which is already in r16
+ */
+ srdi r11,r16,44 /* get region */
+ xoris r11,r11,0xc
+ cmpldi cr0,r11,0 /* linear mapping ? */
+ beq tlb_load_linear /* yes -> go to linear map load */
+ cmpldi cr1,r11,1 /* vmalloc mapping ? */
+
+ /* We do the user/kernel test for the PID here along with the RW test
+ */
+ srdi. r11,r16,60 /* Check for user region */
+ ld r15,PACAPGD(r13) /* Load user pgdir */
+ beq htw_tlb_miss
+
+ /* XXX replace the RMW cycles with immediate loads + writes */
+1: mfspr r10,SPRN_MAS1
+ rlwinm r10,r10,0,16,1 /* Clear TID */
+ mtspr SPRN_MAS1,r10
+ ld r15,PACA_KERNELPGD(r13) /* Load kernel pgdir */
+ beq+ htw_tlb_miss
+
+ /* We got a crappy address, just fault */
+ TLB_MISS_EPILOG_ERROR
+ b exc_instruction_storage_book3e
+
+
+/*
+ * This is the guts of the second-level TLB miss handler for direct
+ * misses. We are entered with:
+ *
+ * r16 = virtual page table faulting address
+ * r15 = PGD pointer
+ * r14 = ESR
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = crap (free to use)
+ * r10 = crap (free to use)
+ *
+ * It can be re-entered by the linear mapping miss handler. However, to
+ * avoid too much complication, it will save/restore things for us
+ */
+htw_tlb_miss:
+#ifdef CONFIG_PPC_KUAP
+ mfspr r10,SPRN_MAS1
+ rlwinm. r10,r10,0,0x3fff0000
+ beq- htw_tlb_miss_fault /* KUAP fault */
+#endif
+ /* Search if we already have a TLB entry for that virtual address, and
+ * if we do, bail out.
+ *
+ * MAS1:IND should be already set based on MAS4
+ */
+ PPC_TLBSRX_DOT(0,R16)
+ beq htw_tlb_miss_done
+
+ /* Now, we need to walk the page tables. First check if we are in
+ * range.
+ */
+ rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
+ bne- htw_tlb_miss_fault
+
+ /* Get the PGD pointer */
+ cmpldi cr0,r15,0
+ beq- htw_tlb_miss_fault
+
+ /* Get to PGD entry */
+ rldicl r11,r16,64-(PGDIR_SHIFT-3),64-PGD_INDEX_SIZE-3
+ clrrdi r10,r11,3
+ ldx r15,r10,r15
+ cmpdi cr0,r15,0
+ bge htw_tlb_miss_fault
+
+ /* Get to PUD entry */
+ rldicl r11,r16,64-(PUD_SHIFT-3),64-PUD_INDEX_SIZE-3
+ clrrdi r10,r11,3
+ ldx r15,r10,r15
+ cmpdi cr0,r15,0
+ bge htw_tlb_miss_fault
+
+ /* Get to PMD entry */
+ rldicl r11,r16,64-(PMD_SHIFT-3),64-PMD_INDEX_SIZE-3
+ clrrdi r10,r11,3
+ ldx r15,r10,r15
+ cmpdi cr0,r15,0
+ bge htw_tlb_miss_fault
+
+ /* Ok, we're all right, we can now create an indirect entry for
+ * a 1M or 256M page.
+ *
+ * The last trick is now that because we use "half" pages for
+ * the HTW (1M IND is 2K and 256M IND is 32K) we need to account
+ * for an added LSB bit to the RPN. For 64K pages, there is no
+ * problem as we already use 32K arrays (half PTE pages), but for
+ * 4K page we need to extract a bit from the virtual address and
+ * insert it into the "PA52" bit of the RPN.
+ */
+ rlwimi r15,r16,32-9,20,20
+ /* Now we build the MAS:
+ *
+ * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG
+ * MAS 1 : Almost fully setup
+ * - PID already updated by caller if necessary
+ * - TSIZE for now is base ind page size always
+ * MAS 2 : Use defaults
+ * MAS 3+7 : Needs to be done
+ */
+ ori r10,r15,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT)
+
+ srdi r16,r10,32
+ mtspr SPRN_MAS3,r10
+ mtspr SPRN_MAS7,r16
+
+ tlbwe
+
+htw_tlb_miss_done:
+ /* We don't bother with restoring DEAR or ESR since we know we are
+ * level 0 and just going back to userland. They are only needed
+ * if you are going to take an access fault
+ */
+ TLB_MISS_EPILOG_SUCCESS
+ rfi
+
+htw_tlb_miss_fault:
+ /* We need to check if it was an instruction miss. We know this
+ * though because r14 would contain -1
+ */
+ cmpdi cr0,r14,-1
+ beq 1f
+ mtspr SPRN_DEAR,r16
+ mtspr SPRN_ESR,r14
+ TLB_MISS_EPILOG_ERROR
+ b exc_data_storage_book3e
+1: TLB_MISS_EPILOG_ERROR
+ b exc_instruction_storage_book3e
+
+/*
+ * This is the guts of "any" level TLB miss handler for kernel linear
+ * mapping misses. We are entered with:
+ *
+ *
+ * r16 = faulting address
+ * r15 = crap (free to use)
+ * r14 = ESR (data) or -1 (instruction)
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = crap (free to use)
+ * r10 = crap (free to use)
+ *
+ * In addition we know that we will not re-enter, so in theory, we could
+ * use a simpler epilog not restoring SRR0/1 etc.. but we'll do that later.
+ *
+ * We also need to be careful about MAS registers here & TLB reservation,
+ * as we know we'll have clobbered them if we interrupt the main TLB miss
+ * handlers in which case we probably want to do a full restart at level
+ * 0 rather than saving / restoring the MAS.
+ *
+ * Note: If we care about performance of that core, we can easily shuffle
+ * a few things around
+ */
+tlb_load_linear:
+ /* For now, we assume the linear mapping is contiguous and stops at
+ * linear_map_top. We also assume the size is a multiple of 1G, thus
+ * we only use 1G pages for now. That might have to be changed in a
+ * final implementation, especially when dealing with hypervisors
+ */
+ __LOAD_PACA_TOC(r11)
+ LOAD_REG_ADDR_ALTTOC(r11, r11, linear_map_top)
+ ld r10,0(r11)
+ tovirt(10,10)
+ cmpld cr0,r16,r10
+ bge tlb_load_linear_fault
+
+ /* MAS1 need whole new setup. */
+ li r15,(BOOK3E_PAGESZ_1GB<<MAS1_TSIZE_SHIFT)
+ oris r15,r15,MAS1_VALID@h /* MAS1 needs V and TSIZE */
+ mtspr SPRN_MAS1,r15
+
+ /* Already somebody there ? */
+ PPC_TLBSRX_DOT(0,R16)
+ beq tlb_load_linear_done
+
+ /* Now we build the remaining MAS. MAS0 and 2 should be fine
+ * with their defaults, which leaves us with MAS 3 and 7. The
+ * mapping is linear, so we just take the address, clear the
+ * region bits, and or in the permission bits which are currently
+ * hard wired
+ */
+ clrrdi r10,r16,30 /* 1G page index */
+ clrldi r10,r10,4 /* clear region bits */
+ ori r10,r10,MAS3_SR|MAS3_SW|MAS3_SX
+
+ srdi r16,r10,32
+ mtspr SPRN_MAS3,r10
+ mtspr SPRN_MAS7,r16
+
+ tlbwe
+
+tlb_load_linear_done:
+ /* We use the "error" epilog for success as we do want to
+ * restore to the initial faulting context, whatever it was.
+ * We do that because we can't resume a fault within a TLB
+ * miss handler, due to MAS and TLB reservation being clobbered.
+ */
+ TLB_MISS_EPILOG_ERROR
+ rfi
+
+tlb_load_linear_fault:
+ /* We keep the DEAR and ESR around, this shouldn't have happened */
+ cmpdi cr0,r14,-1
+ beq 1f
+ TLB_MISS_EPILOG_ERROR_SPECIAL
+ b exc_data_storage_book3e
+1: TLB_MISS_EPILOG_ERROR_SPECIAL
+ b exc_instruction_storage_book3e
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 15:48:31 +0000