diff options
Diffstat (limited to '')
-rw-r--r-- | arch/powerpc/platforms/44x/warp.c | 329 |
1 files changed, 329 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c new file mode 100644 index 0000000000..bf0188dcb9 --- /dev/null +++ b/arch/powerpc/platforms/44x/warp.c @@ -0,0 +1,329 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * PIKA Warp(tm) board specific routines + * + * Copyright (c) 2008-2009 PIKA Technologies + * Sean MacLennan <smaclennan@pikatech.com> + */ +#include <linux/err.h> +#include <linux/init.h> +#include <linux/of_platform.h> +#include <linux/kthread.h> +#include <linux/leds.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/gpio/consumer.h> +#include <linux/slab.h> +#include <linux/export.h> + +#include <asm/machdep.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/ppc4xx.h> +#include <asm/dma.h> + + +static const struct of_device_id warp_of_bus[] __initconst = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +static int __init warp_device_probe(void) +{ + of_platform_bus_probe(NULL, warp_of_bus, NULL); + return 0; +} +machine_device_initcall(warp, warp_device_probe); + +define_machine(warp) { + .name = "Warp", + .compatible = "pika,warp", + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, +}; + + +static int __init warp_post_info(void) +{ + struct device_node *np; + void __iomem *fpga; + u32 post1, post2; + + /* Sighhhh... POST information is in the sd area. */ + np = of_find_compatible_node(NULL, NULL, "pika,fpga-sd"); + if (np == NULL) + return -ENOENT; + + fpga = of_iomap(np, 0); + of_node_put(np); + if (fpga == NULL) + return -ENOENT; + + post1 = in_be32(fpga + 0x40); + post2 = in_be32(fpga + 0x44); + + iounmap(fpga); + + if (post1 || post2) + printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2); + else + printk(KERN_INFO "Warp POST OK\n"); + + return 0; +} + + +#ifdef CONFIG_SENSORS_AD7414 + +static void __iomem *dtm_fpga; + +#define WARP_GREEN_LED 0 +#define WARP_RED_LED 1 + +static struct gpio_led warp_gpio_led_pins[] = { + [WARP_GREEN_LED] = { + .name = "green", + .default_state = LEDS_DEFSTATE_KEEP, + .gpiod = NULL, /* to be filled by pika_setup_leds() */ + }, + [WARP_RED_LED] = { + .name = "red", + .default_state = LEDS_DEFSTATE_KEEP, + .gpiod = NULL, /* to be filled by pika_setup_leds() */ + }, +}; + +static struct gpio_led_platform_data warp_gpio_led_data = { + .leds = warp_gpio_led_pins, + .num_leds = ARRAY_SIZE(warp_gpio_led_pins), +}; + +static struct platform_device warp_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &warp_gpio_led_data, + }, +}; + +static irqreturn_t temp_isr(int irq, void *context) +{ + int value = 1; + + local_irq_disable(); + + gpiod_set_value(warp_gpio_led_pins[WARP_GREEN_LED].gpiod, 0); + + printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n\n"); + + while (1) { + if (dtm_fpga) { + unsigned reset = in_be32(dtm_fpga + 0x14); + out_be32(dtm_fpga + 0x14, reset); + } + + gpiod_set_value(warp_gpio_led_pins[WARP_RED_LED].gpiod, value); + value ^= 1; + mdelay(500); + } + + /* Not reached */ + return IRQ_HANDLED; +} + +/* + * Because green and red power LEDs are normally driven by leds-gpio driver, + * but in case of critical temperature shutdown we want to drive them + * ourselves, we acquire both and then create leds-gpio platform device + * ourselves, instead of doing it through device tree. This way we can still + * keep access to the gpios and use them when needed. + */ +static int pika_setup_leds(void) +{ + struct device_node *np, *child; + struct gpio_desc *gpio; + struct gpio_led *led; + int led_count = 0; + int error; + int i; + + np = of_find_compatible_node(NULL, NULL, "warp-power-leds"); + if (!np) { + printk(KERN_ERR __FILE__ ": Unable to find leds\n"); + return -ENOENT; + } + + for_each_child_of_node(np, child) { + for (i = 0; i < ARRAY_SIZE(warp_gpio_led_pins); i++) { + led = &warp_gpio_led_pins[i]; + + if (!of_node_name_eq(child, led->name)) + continue; + + if (led->gpiod) { + printk(KERN_ERR __FILE__ ": %s led has already been defined\n", + led->name); + continue; + } + + gpio = fwnode_gpiod_get_index(of_fwnode_handle(child), + NULL, 0, GPIOD_ASIS, + led->name); + error = PTR_ERR_OR_ZERO(gpio); + if (error) { + printk(KERN_ERR __FILE__ ": Failed to get %s led gpio: %d\n", + led->name, error); + of_node_put(child); + goto err_cleanup_pins; + } + + led->gpiod = gpio; + led_count++; + } + } + + of_node_put(np); + + /* Skip device registration if no leds have been defined */ + if (led_count) { + error = platform_device_register(&warp_gpio_leds); + if (error) { + printk(KERN_ERR __FILE__ ": Unable to add leds-gpio: %d\n", + error); + goto err_cleanup_pins; + } + } + + return 0; + +err_cleanup_pins: + for (i = 0; i < ARRAY_SIZE(warp_gpio_led_pins); i++) { + led = &warp_gpio_led_pins[i]; + gpiod_put(led->gpiod); + led->gpiod = NULL; + } + return error; +} + +static void pika_setup_critical_temp(struct device_node *np, + struct i2c_client *client) +{ + int irq, rc; + + /* Do this before enabling critical temp interrupt since we + * may immediately interrupt. + */ + pika_setup_leds(); + + /* These registers are in 1 degree increments. */ + i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */ + i2c_smbus_write_byte_data(client, 3, 0); /* Tlow */ + + irq = irq_of_parse_and_map(np, 0); + if (!irq) { + printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n"); + return; + } + + rc = request_irq(irq, temp_isr, 0, "ad7414", NULL); + if (rc) { + printk(KERN_ERR __FILE__ + ": Unable to request ad7414 irq %d = %d\n", irq, rc); + return; + } +} + +static inline void pika_dtm_check_fan(void __iomem *fpga) +{ + static int fan_state; + u32 fan = in_be32(fpga + 0x34) & (1 << 14); + + if (fan_state != fan) { + fan_state = fan; + if (fan) + printk(KERN_WARNING "Fan rotation error detected." + " Please check hardware.\n"); + } +} + +static int pika_dtm_thread(void __iomem *fpga) +{ + struct device_node *np; + struct i2c_client *client; + + np = of_find_compatible_node(NULL, NULL, "adi,ad7414"); + if (np == NULL) + return -ENOENT; + + client = of_find_i2c_device_by_node(np); + if (client == NULL) { + of_node_put(np); + return -ENOENT; + } + + pika_setup_critical_temp(np, client); + + of_node_put(np); + + printk(KERN_INFO "Warp DTM thread running.\n"); + + while (!kthread_should_stop()) { + int val; + + val = i2c_smbus_read_word_data(client, 0); + if (val < 0) + dev_dbg(&client->dev, "DTM read temp failed.\n"); + else { + s16 temp = swab16(val); + out_be32(fpga + 0x20, temp); + } + + pika_dtm_check_fan(fpga); + + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(HZ); + } + + return 0; +} + +static int __init pika_dtm_start(void) +{ + struct task_struct *dtm_thread; + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "pika,fpga"); + if (np == NULL) + return -ENOENT; + + dtm_fpga = of_iomap(np, 0); + of_node_put(np); + if (dtm_fpga == NULL) + return -ENOENT; + + /* Must get post info before thread starts. */ + warp_post_info(); + + dtm_thread = kthread_run(pika_dtm_thread, dtm_fpga, "pika-dtm"); + if (IS_ERR(dtm_thread)) { + iounmap(dtm_fpga); + return PTR_ERR(dtm_thread); + } + + return 0; +} +machine_late_initcall(warp, pika_dtm_start); + +#else /* !CONFIG_SENSORS_AD7414 */ + +machine_late_initcall(warp, warp_post_info); + +#endif |