summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/4xx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/4xx')
-rw-r--r--arch/powerpc/platforms/4xx/Makefile7
-rw-r--r--arch/powerpc/platforms/4xx/cpm.c332
-rw-r--r--arch/powerpc/platforms/4xx/gpio.c195
-rw-r--r--arch/powerpc/platforms/4xx/hsta_msi.c208
-rw-r--r--arch/powerpc/platforms/4xx/machine_check.c23
-rw-r--r--arch/powerpc/platforms/4xx/pci.c2182
-rw-r--r--arch/powerpc/platforms/4xx/pci.h505
-rw-r--r--arch/powerpc/platforms/4xx/soc.c218
-rw-r--r--arch/powerpc/platforms/4xx/uic.c331
9 files changed, 4001 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/4xx/Makefile b/arch/powerpc/platforms/4xx/Makefile
new file mode 100644
index 0000000000..2071a0abe0
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y += uic.o machine_check.o
+obj-$(CONFIG_4xx_SOC) += soc.o
+obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_PPC4xx_HSTA_MSI) += hsta_msi.o
+obj-$(CONFIG_PPC4xx_CPM) += cpm.o
+obj-$(CONFIG_PPC4xx_GPIO) += gpio.o
diff --git a/arch/powerpc/platforms/4xx/cpm.c b/arch/powerpc/platforms/4xx/cpm.c
new file mode 100644
index 0000000000..670f8ad446
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/cpm.c
@@ -0,0 +1,332 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PowerPC 4xx Clock and Power Management
+ *
+ * Copyright (C) 2010, Applied Micro Circuits Corporation
+ * Victor Gallardo (vgallardo@apm.com)
+ *
+ * Based on arch/powerpc/platforms/44x/idle.c:
+ * Jerone Young <jyoung5@us.ibm.com>
+ * Copyright 2008 IBM Corp.
+ *
+ * Based on arch/powerpc/sysdev/fsl_pmc.c:
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ * Copyright 2009 MontaVista Software, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/sysfs.h>
+#include <linux/cpu.h>
+#include <linux/suspend.h>
+#include <asm/dcr.h>
+#include <asm/dcr-native.h>
+#include <asm/machdep.h>
+
+#define CPM_ER 0
+#define CPM_FR 1
+#define CPM_SR 2
+
+#define CPM_IDLE_WAIT 0
+#define CPM_IDLE_DOZE 1
+
+struct cpm {
+ dcr_host_t dcr_host;
+ unsigned int dcr_offset[3];
+ unsigned int powersave_off;
+ unsigned int unused;
+ unsigned int idle_doze;
+ unsigned int standby;
+ unsigned int suspend;
+};
+
+static struct cpm cpm;
+
+struct cpm_idle_mode {
+ unsigned int enabled;
+ const char *name;
+};
+
+static struct cpm_idle_mode idle_mode[] = {
+ [CPM_IDLE_WAIT] = { 1, "wait" }, /* default */
+ [CPM_IDLE_DOZE] = { 0, "doze" },
+};
+
+static unsigned int cpm_set(unsigned int cpm_reg, unsigned int mask)
+{
+ unsigned int value;
+
+ /* CPM controller supports 3 different types of sleep interface
+ * known as class 1, 2 and 3. For class 1 units, they are
+ * unconditionally put to sleep when the corresponding CPM bit is
+ * set. For class 2 and 3 units this is not case; if they can be
+ * put to sleep, they will. Here we do not verify, we just
+ * set them and expect them to eventually go off when they can.
+ */
+ value = dcr_read(cpm.dcr_host, cpm.dcr_offset[cpm_reg]);
+ dcr_write(cpm.dcr_host, cpm.dcr_offset[cpm_reg], value | mask);
+
+ /* return old state, to restore later if needed */
+ return value;
+}
+
+static void cpm_idle_wait(void)
+{
+ unsigned long msr_save;
+
+ /* save off initial state */
+ msr_save = mfmsr();
+ /* sync required when CPM0_ER[CPU] is set */
+ mb();
+ /* set wait state MSR */
+ mtmsr(msr_save|MSR_WE|MSR_EE|MSR_CE|MSR_DE);
+ isync();
+ /* return to initial state */
+ mtmsr(msr_save);
+ isync();
+}
+
+static void cpm_idle_sleep(unsigned int mask)
+{
+ unsigned int er_save;
+
+ /* update CPM_ER state */
+ er_save = cpm_set(CPM_ER, mask);
+
+ /* go to wait state so that CPM0_ER[CPU] can take effect */
+ cpm_idle_wait();
+
+ /* restore CPM_ER state */
+ dcr_write(cpm.dcr_host, cpm.dcr_offset[CPM_ER], er_save);
+}
+
+static void cpm_idle_doze(void)
+{
+ cpm_idle_sleep(cpm.idle_doze);
+}
+
+static void cpm_idle_config(int mode)
+{
+ int i;
+
+ if (idle_mode[mode].enabled)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(idle_mode); i++)
+ idle_mode[i].enabled = 0;
+
+ idle_mode[mode].enabled = 1;
+}
+
+static ssize_t cpm_idle_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ char *s = buf;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(idle_mode); i++) {
+ if (idle_mode[i].enabled)
+ s += sprintf(s, "[%s] ", idle_mode[i].name);
+ else
+ s += sprintf(s, "%s ", idle_mode[i].name);
+ }
+
+ *(s-1) = '\n'; /* convert the last space to a newline */
+
+ return s - buf;
+}
+
+static ssize_t cpm_idle_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t n)
+{
+ int i;
+ char *p;
+ int len;
+
+ p = memchr(buf, '\n', n);
+ len = p ? p - buf : n;
+
+ for (i = 0; i < ARRAY_SIZE(idle_mode); i++) {
+ if (strncmp(buf, idle_mode[i].name, len) == 0) {
+ cpm_idle_config(i);
+ return n;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static struct kobj_attribute cpm_idle_attr =
+ __ATTR(idle, 0644, cpm_idle_show, cpm_idle_store);
+
+static void __init cpm_idle_config_sysfs(void)
+{
+ struct device *dev;
+ unsigned long ret;
+
+ dev = get_cpu_device(0);
+
+ ret = sysfs_create_file(&dev->kobj,
+ &cpm_idle_attr.attr);
+ if (ret)
+ printk(KERN_WARNING
+ "cpm: failed to create idle sysfs entry\n");
+}
+
+static void cpm_idle(void)
+{
+ if (idle_mode[CPM_IDLE_DOZE].enabled)
+ cpm_idle_doze();
+ else
+ cpm_idle_wait();
+}
+
+static int cpm_suspend_valid(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ return !!cpm.standby;
+ case PM_SUSPEND_MEM:
+ return !!cpm.suspend;
+ default:
+ return 0;
+ }
+}
+
+static void cpm_suspend_standby(unsigned int mask)
+{
+ unsigned long tcr_save;
+
+ /* disable decrement interrupt */
+ tcr_save = mfspr(SPRN_TCR);
+ mtspr(SPRN_TCR, tcr_save & ~TCR_DIE);
+
+ /* go to sleep state */
+ cpm_idle_sleep(mask);
+
+ /* restore decrement interrupt */
+ mtspr(SPRN_TCR, tcr_save);
+}
+
+static int cpm_suspend_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ cpm_suspend_standby(cpm.standby);
+ break;
+ case PM_SUSPEND_MEM:
+ cpm_suspend_standby(cpm.suspend);
+ break;
+ }
+
+ return 0;
+}
+
+static const struct platform_suspend_ops cpm_suspend_ops = {
+ .valid = cpm_suspend_valid,
+ .enter = cpm_suspend_enter,
+};
+
+static int __init cpm_get_uint_property(struct device_node *np,
+ const char *name)
+{
+ int len;
+ const unsigned int *prop = of_get_property(np, name, &len);
+
+ if (prop == NULL || len < sizeof(u32))
+ return 0;
+
+ return *prop;
+}
+
+static int __init cpm_init(void)
+{
+ struct device_node *np;
+ int dcr_base, dcr_len;
+ int ret = 0;
+
+ if (!cpm.powersave_off) {
+ cpm_idle_config(CPM_IDLE_WAIT);
+ ppc_md.power_save = &cpm_idle;
+ }
+
+ np = of_find_compatible_node(NULL, NULL, "ibm,cpm");
+ if (!np) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ dcr_base = dcr_resource_start(np, 0);
+ dcr_len = dcr_resource_len(np, 0);
+
+ if (dcr_base == 0 || dcr_len == 0) {
+ printk(KERN_ERR "cpm: could not parse dcr property for %pOF\n",
+ np);
+ ret = -EINVAL;
+ goto node_put;
+ }
+
+ cpm.dcr_host = dcr_map(np, dcr_base, dcr_len);
+
+ if (!DCR_MAP_OK(cpm.dcr_host)) {
+ printk(KERN_ERR "cpm: failed to map dcr property for %pOF\n",
+ np);
+ ret = -EINVAL;
+ goto node_put;
+ }
+
+ /* All 4xx SoCs with a CPM controller have one of two
+ * different order for the CPM registers. Some have the
+ * CPM registers in the following order (ER,FR,SR). The
+ * others have them in the following order (SR,ER,FR).
+ */
+
+ if (cpm_get_uint_property(np, "er-offset") == 0) {
+ cpm.dcr_offset[CPM_ER] = 0;
+ cpm.dcr_offset[CPM_FR] = 1;
+ cpm.dcr_offset[CPM_SR] = 2;
+ } else {
+ cpm.dcr_offset[CPM_ER] = 1;
+ cpm.dcr_offset[CPM_FR] = 2;
+ cpm.dcr_offset[CPM_SR] = 0;
+ }
+
+ /* Now let's see what IPs to turn off for the following modes */
+
+ cpm.unused = cpm_get_uint_property(np, "unused-units");
+ cpm.idle_doze = cpm_get_uint_property(np, "idle-doze");
+ cpm.standby = cpm_get_uint_property(np, "standby");
+ cpm.suspend = cpm_get_uint_property(np, "suspend");
+
+ /* If some IPs are unused let's turn them off now */
+
+ if (cpm.unused) {
+ cpm_set(CPM_ER, cpm.unused);
+ cpm_set(CPM_FR, cpm.unused);
+ }
+
+ /* Now let's export interfaces */
+
+ if (!cpm.powersave_off && cpm.idle_doze)
+ cpm_idle_config_sysfs();
+
+ if (cpm.standby || cpm.suspend)
+ suspend_set_ops(&cpm_suspend_ops);
+node_put:
+ of_node_put(np);
+out:
+ return ret;
+}
+
+late_initcall(cpm_init);
+
+static int __init cpm_powersave_off(char *arg)
+{
+ cpm.powersave_off = 1;
+ return 1;
+}
+__setup("powersave=off", cpm_powersave_off);
diff --git a/arch/powerpc/platforms/4xx/gpio.c b/arch/powerpc/platforms/4xx/gpio.c
new file mode 100644
index 0000000000..e5f2319e5c
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/gpio.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PPC4xx gpio driver
+ *
+ * Copyright (c) 2008 Harris Corporation
+ * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Steve Falco <sfalco@harris.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/gpio/legacy-of-mm-gpiochip.h>
+#include <linux/gpio/driver.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+
+#define GPIO_MASK(gpio) (0x80000000 >> (gpio))
+#define GPIO_MASK2(gpio) (0xc0000000 >> ((gpio) * 2))
+
+/* Physical GPIO register layout */
+struct ppc4xx_gpio {
+ __be32 or;
+ __be32 tcr;
+ __be32 osrl;
+ __be32 osrh;
+ __be32 tsrl;
+ __be32 tsrh;
+ __be32 odr;
+ __be32 ir;
+ __be32 rr1;
+ __be32 rr2;
+ __be32 rr3;
+ __be32 reserved1;
+ __be32 isr1l;
+ __be32 isr1h;
+ __be32 isr2l;
+ __be32 isr2h;
+ __be32 isr3l;
+ __be32 isr3h;
+};
+
+struct ppc4xx_gpio_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+};
+
+/*
+ * GPIO LIB API implementation for GPIOs
+ *
+ * There are a maximum of 32 gpios in each gpio controller.
+ */
+
+static int ppc4xx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+
+ return !!(in_be32(&regs->ir) & GPIO_MASK(gpio));
+}
+
+static inline void
+__ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+
+ if (val)
+ setbits32(&regs->or, GPIO_MASK(gpio));
+ else
+ clrbits32(&regs->or, GPIO_MASK(gpio));
+}
+
+static void
+ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct ppc4xx_gpio_chip *chip = gpiochip_get_data(gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->lock, flags);
+
+ __ppc4xx_gpio_set(gc, gpio, val);
+
+ spin_unlock_irqrestore(&chip->lock, flags);
+
+ pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+}
+
+static int ppc4xx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpio_chip *chip = gpiochip_get_data(gc);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->lock, flags);
+
+ /* Disable open-drain function */
+ clrbits32(&regs->odr, GPIO_MASK(gpio));
+
+ /* Float the pin */
+ clrbits32(&regs->tcr, GPIO_MASK(gpio));
+
+ /* Bits 0-15 use TSRL/OSRL, bits 16-31 use TSRH/OSRH */
+ if (gpio < 16) {
+ clrbits32(&regs->osrl, GPIO_MASK2(gpio));
+ clrbits32(&regs->tsrl, GPIO_MASK2(gpio));
+ } else {
+ clrbits32(&regs->osrh, GPIO_MASK2(gpio));
+ clrbits32(&regs->tsrh, GPIO_MASK2(gpio));
+ }
+
+ spin_unlock_irqrestore(&chip->lock, flags);
+
+ return 0;
+}
+
+static int
+ppc4xx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpio_chip *chip = gpiochip_get_data(gc);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->lock, flags);
+
+ /* First set initial value */
+ __ppc4xx_gpio_set(gc, gpio, val);
+
+ /* Disable open-drain function */
+ clrbits32(&regs->odr, GPIO_MASK(gpio));
+
+ /* Drive the pin */
+ setbits32(&regs->tcr, GPIO_MASK(gpio));
+
+ /* Bits 0-15 use TSRL, bits 16-31 use TSRH */
+ if (gpio < 16) {
+ clrbits32(&regs->osrl, GPIO_MASK2(gpio));
+ clrbits32(&regs->tsrl, GPIO_MASK2(gpio));
+ } else {
+ clrbits32(&regs->osrh, GPIO_MASK2(gpio));
+ clrbits32(&regs->tsrh, GPIO_MASK2(gpio));
+ }
+
+ spin_unlock_irqrestore(&chip->lock, flags);
+
+ pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+
+ return 0;
+}
+
+static int __init ppc4xx_add_gpiochips(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, "ibm,ppc4xx-gpio") {
+ int ret;
+ struct ppc4xx_gpio_chip *ppc4xx_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct gpio_chip *gc;
+
+ ppc4xx_gc = kzalloc(sizeof(*ppc4xx_gc), GFP_KERNEL);
+ if (!ppc4xx_gc) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ spin_lock_init(&ppc4xx_gc->lock);
+
+ mm_gc = &ppc4xx_gc->mm_gc;
+ gc = &mm_gc->gc;
+
+ gc->ngpio = 32;
+ gc->direction_input = ppc4xx_gpio_dir_in;
+ gc->direction_output = ppc4xx_gpio_dir_out;
+ gc->get = ppc4xx_gpio_get;
+ gc->set = ppc4xx_gpio_set;
+
+ ret = of_mm_gpiochip_add_data(np, mm_gc, ppc4xx_gc);
+ if (ret)
+ goto err;
+ continue;
+err:
+ pr_err("%pOF: registration failed with status %d\n", np, ret);
+ kfree(ppc4xx_gc);
+ /* try others anyway */
+ }
+ return 0;
+}
+arch_initcall(ppc4xx_add_gpiochips);
diff --git a/arch/powerpc/platforms/4xx/hsta_msi.c b/arch/powerpc/platforms/4xx/hsta_msi.c
new file mode 100644
index 0000000000..c6bd846b0d
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/hsta_msi.c
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MSI support for PPC4xx SoCs using High Speed Transfer Assist (HSTA) for
+ * generation of the interrupt.
+ *
+ * Copyright © 2013 Alistair Popple <alistair@popple.id.au> IBM Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/msi.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/semaphore.h>
+#include <asm/msi_bitmap.h>
+#include <asm/ppc-pci.h>
+
+struct ppc4xx_hsta_msi {
+ struct device *dev;
+
+ /* The ioremapped HSTA MSI IO space */
+ u32 __iomem *data;
+
+ /* Physical address of HSTA MSI IO space */
+ u64 address;
+ struct msi_bitmap bmp;
+
+ /* An array mapping offsets to hardware IRQs */
+ int *irq_map;
+
+ /* Number of hwirqs supported */
+ int irq_count;
+};
+static struct ppc4xx_hsta_msi ppc4xx_hsta_msi;
+
+static int hsta_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+ struct msi_msg msg;
+ struct msi_desc *entry;
+ int irq, hwirq;
+ u64 addr;
+
+ /* We don't support MSI-X */
+ if (type == PCI_CAP_ID_MSIX) {
+ pr_debug("%s: MSI-X not supported.\n", __func__);
+ return -EINVAL;
+ }
+
+ msi_for_each_desc(entry, &dev->dev, MSI_DESC_NOTASSOCIATED) {
+ irq = msi_bitmap_alloc_hwirqs(&ppc4xx_hsta_msi.bmp, 1);
+ if (irq < 0) {
+ pr_debug("%s: Failed to allocate msi interrupt\n",
+ __func__);
+ return irq;
+ }
+
+ hwirq = ppc4xx_hsta_msi.irq_map[irq];
+ if (!hwirq) {
+ pr_err("%s: Failed mapping irq %d\n", __func__, irq);
+ return -EINVAL;
+ }
+
+ /*
+ * HSTA generates interrupts on writes to 128-bit aligned
+ * addresses.
+ */
+ addr = ppc4xx_hsta_msi.address + irq*0x10;
+ msg.address_hi = upper_32_bits(addr);
+ msg.address_lo = lower_32_bits(addr);
+
+ /* Data is not used by the HSTA. */
+ msg.data = 0;
+
+ pr_debug("%s: Setup irq %d (0x%0llx)\n", __func__, hwirq,
+ (((u64) msg.address_hi) << 32) | msg.address_lo);
+
+ if (irq_set_msi_desc(hwirq, entry)) {
+ pr_err(
+ "%s: Invalid hwirq %d specified in device tree\n",
+ __func__, hwirq);
+ msi_bitmap_free_hwirqs(&ppc4xx_hsta_msi.bmp, irq, 1);
+ return -EINVAL;
+ }
+ pci_write_msi_msg(hwirq, &msg);
+ }
+
+ return 0;
+}
+
+static int hsta_find_hwirq_offset(int hwirq)
+{
+ int irq;
+
+ /* Find the offset given the hwirq */
+ for (irq = 0; irq < ppc4xx_hsta_msi.irq_count; irq++)
+ if (ppc4xx_hsta_msi.irq_map[irq] == hwirq)
+ return irq;
+
+ return -EINVAL;
+}
+
+static void hsta_teardown_msi_irqs(struct pci_dev *dev)
+{
+ struct msi_desc *entry;
+ int irq;
+
+ msi_for_each_desc(entry, &dev->dev, MSI_DESC_ASSOCIATED) {
+ irq = hsta_find_hwirq_offset(entry->irq);
+
+ /* entry->irq should always be in irq_map */
+ BUG_ON(irq < 0);
+ irq_set_msi_desc(entry->irq, NULL);
+ msi_bitmap_free_hwirqs(&ppc4xx_hsta_msi.bmp, irq, 1);
+ pr_debug("%s: Teardown IRQ %u (index %u)\n", __func__,
+ entry->irq, irq);
+ entry->irq = 0;
+ }
+}
+
+static int hsta_msi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *mem;
+ int irq, ret, irq_count;
+ struct pci_controller *phb;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(dev, "Unable to get mmio space\n");
+ return -EINVAL;
+ }
+
+ irq_count = of_irq_count(dev->of_node);
+ if (!irq_count) {
+ dev_err(dev, "Unable to find IRQ range\n");
+ return -EINVAL;
+ }
+
+ ppc4xx_hsta_msi.dev = dev;
+ ppc4xx_hsta_msi.address = mem->start;
+ ppc4xx_hsta_msi.data = ioremap(mem->start, resource_size(mem));
+ ppc4xx_hsta_msi.irq_count = irq_count;
+ if (!ppc4xx_hsta_msi.data) {
+ dev_err(dev, "Unable to map memory\n");
+ return -ENOMEM;
+ }
+
+ ret = msi_bitmap_alloc(&ppc4xx_hsta_msi.bmp, irq_count, dev->of_node);
+ if (ret)
+ goto out;
+
+ ppc4xx_hsta_msi.irq_map = kmalloc_array(irq_count, sizeof(int),
+ GFP_KERNEL);
+ if (!ppc4xx_hsta_msi.irq_map) {
+ ret = -ENOMEM;
+ goto out1;
+ }
+
+ /* Setup a mapping from irq offsets to hardware irq numbers */
+ for (irq = 0; irq < irq_count; irq++) {
+ ppc4xx_hsta_msi.irq_map[irq] =
+ irq_of_parse_and_map(dev->of_node, irq);
+ if (!ppc4xx_hsta_msi.irq_map[irq]) {
+ dev_err(dev, "Unable to map IRQ\n");
+ ret = -EINVAL;
+ goto out2;
+ }
+ }
+
+ list_for_each_entry(phb, &hose_list, list_node) {
+ phb->controller_ops.setup_msi_irqs = hsta_setup_msi_irqs;
+ phb->controller_ops.teardown_msi_irqs = hsta_teardown_msi_irqs;
+ }
+ return 0;
+
+out2:
+ kfree(ppc4xx_hsta_msi.irq_map);
+
+out1:
+ msi_bitmap_free(&ppc4xx_hsta_msi.bmp);
+
+out:
+ iounmap(ppc4xx_hsta_msi.data);
+ return ret;
+}
+
+static const struct of_device_id hsta_msi_ids[] = {
+ {
+ .compatible = "ibm,hsta-msi",
+ },
+ {}
+};
+
+static struct platform_driver hsta_msi_driver = {
+ .probe = hsta_msi_probe,
+ .driver = {
+ .name = "hsta-msi",
+ .of_match_table = hsta_msi_ids,
+ },
+};
+
+static int hsta_msi_init(void)
+{
+ return platform_driver_register(&hsta_msi_driver);
+}
+subsys_initcall(hsta_msi_init);
diff --git a/arch/powerpc/platforms/4xx/machine_check.c b/arch/powerpc/platforms/4xx/machine_check.c
new file mode 100644
index 0000000000..a905da1d6f
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/machine_check.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ */
+
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/ptrace.h>
+
+#include <asm/reg.h>
+
+int machine_check_4xx(struct pt_regs *regs)
+{
+ unsigned long reason = regs->esr;
+
+ if (reason & ESR_IMCP) {
+ printk("Instruction");
+ mtspr(SPRN_ESR, reason & ~ESR_IMCP);
+ } else
+ printk("Data");
+ printk(" machine check in kernel mode.\n");
+
+ return 0;
+}
diff --git a/arch/powerpc/platforms/4xx/pci.c b/arch/powerpc/platforms/4xx/pci.c
new file mode 100644
index 0000000000..48626615b1
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/pci.c
@@ -0,0 +1,2182 @@
+/*
+ * PCI / PCI-X / PCI-Express support for 4xx parts
+ *
+ * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ *
+ * Most PCI Express code is coming from Stefan Roese implementation for
+ * arch/ppc in the Denx tree, slightly reworked by me.
+ *
+ * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * Some of that comes itself from a previous implementation for 440SPE only
+ * by Roland Dreier:
+ *
+ * Copyright (c) 2005 Cisco Systems. All rights reserved.
+ * Roland Dreier <rolandd@cisco.com>
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+#include <mm/mmu_decl.h>
+
+#include "pci.h"
+
+static int dma_offset_set;
+
+#define U64_TO_U32_LOW(val) ((u32)((val) & 0x00000000ffffffffULL))
+#define U64_TO_U32_HIGH(val) ((u32)((val) >> 32))
+
+#define RES_TO_U32_LOW(val) \
+ ((sizeof(resource_size_t) > sizeof(u32)) ? U64_TO_U32_LOW(val) : (val))
+#define RES_TO_U32_HIGH(val) \
+ ((sizeof(resource_size_t) > sizeof(u32)) ? U64_TO_U32_HIGH(val) : (0))
+
+static inline int ppc440spe_revA(void)
+{
+ /* Catch both 440SPe variants, with and without RAID6 support */
+ if ((mfspr(SPRN_PVR) & 0xffefffff) == 0x53421890)
+ return 1;
+ else
+ return 0;
+}
+
+static void fixup_ppc4xx_pci_bridge(struct pci_dev *dev)
+{
+ struct pci_controller *hose;
+ struct resource *r;
+
+ if (dev->devfn != 0 || dev->bus->self != NULL)
+ return;
+
+ hose = pci_bus_to_host(dev->bus);
+ if (hose == NULL)
+ return;
+
+ if (!of_device_is_compatible(hose->dn, "ibm,plb-pciex") &&
+ !of_device_is_compatible(hose->dn, "ibm,plb-pcix") &&
+ !of_device_is_compatible(hose->dn, "ibm,plb-pci"))
+ return;
+
+ if (of_device_is_compatible(hose->dn, "ibm,plb440epx-pci") ||
+ of_device_is_compatible(hose->dn, "ibm,plb440grx-pci")) {
+ hose->indirect_type |= PPC_INDIRECT_TYPE_BROKEN_MRM;
+ }
+
+ /* Hide the PCI host BARs from the kernel as their content doesn't
+ * fit well in the resource management
+ */
+ pci_dev_for_each_resource(dev, r) {
+ r->start = r->end = 0;
+ r->flags = 0;
+ }
+
+ printk(KERN_INFO "PCI: Hiding 4xx host bridge resources %s\n",
+ pci_name(dev));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_ppc4xx_pci_bridge);
+
+static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose,
+ void __iomem *reg,
+ struct resource *res)
+{
+ u64 size;
+ const u32 *ranges;
+ int rlen;
+ int pna = of_n_addr_cells(hose->dn);
+ int np = pna + 5;
+
+ /* Default */
+ res->start = 0;
+ size = 0x80000000;
+ res->end = size - 1;
+ res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
+
+ /* Get dma-ranges property */
+ ranges = of_get_property(hose->dn, "dma-ranges", &rlen);
+ if (ranges == NULL)
+ goto out;
+
+ /* Walk it */
+ while ((rlen -= np * 4) >= 0) {
+ u32 pci_space = ranges[0];
+ u64 pci_addr = of_read_number(ranges + 1, 2);
+ u64 cpu_addr = of_translate_dma_address(hose->dn, ranges + 3);
+ size = of_read_number(ranges + pna + 3, 2);
+ ranges += np;
+ if (cpu_addr == OF_BAD_ADDR || size == 0)
+ continue;
+
+ /* We only care about memory */
+ if ((pci_space & 0x03000000) != 0x02000000)
+ continue;
+
+ /* We currently only support memory at 0, and pci_addr
+ * within 32 bits space
+ */
+ if (cpu_addr != 0 || pci_addr > 0xffffffff) {
+ printk(KERN_WARNING "%pOF: Ignored unsupported dma range"
+ " 0x%016llx...0x%016llx -> 0x%016llx\n",
+ hose->dn,
+ pci_addr, pci_addr + size - 1, cpu_addr);
+ continue;
+ }
+
+ /* Check if not prefetchable */
+ if (!(pci_space & 0x40000000))
+ res->flags &= ~IORESOURCE_PREFETCH;
+
+
+ /* Use that */
+ res->start = pci_addr;
+ /* Beware of 32 bits resources */
+ if (sizeof(resource_size_t) == sizeof(u32) &&
+ (pci_addr + size) > 0x100000000ull)
+ res->end = 0xffffffff;
+ else
+ res->end = res->start + size - 1;
+ break;
+ }
+
+ /* We only support one global DMA offset */
+ if (dma_offset_set && pci_dram_offset != res->start) {
+ printk(KERN_ERR "%pOF: dma-ranges(s) mismatch\n", hose->dn);
+ return -ENXIO;
+ }
+
+ /* Check that we can fit all of memory as we don't support
+ * DMA bounce buffers
+ */
+ if (size < total_memory) {
+ printk(KERN_ERR "%pOF: dma-ranges too small "
+ "(size=%llx total_memory=%llx)\n",
+ hose->dn, size, (u64)total_memory);
+ return -ENXIO;
+ }
+
+ /* Check we are a power of 2 size and that base is a multiple of size*/
+ if ((size & (size - 1)) != 0 ||
+ (res->start & (size - 1)) != 0) {
+ printk(KERN_ERR "%pOF: dma-ranges unaligned\n", hose->dn);
+ return -ENXIO;
+ }
+
+ /* Check that we are fully contained within 32 bits space if we are not
+ * running on a 460sx or 476fpe which have 64 bit bus addresses.
+ */
+ if (res->end > 0xffffffff &&
+ !(of_device_is_compatible(hose->dn, "ibm,plb-pciex-460sx")
+ || of_device_is_compatible(hose->dn, "ibm,plb-pciex-476fpe"))) {
+ printk(KERN_ERR "%pOF: dma-ranges outside of 32 bits space\n",
+ hose->dn);
+ return -ENXIO;
+ }
+ out:
+ dma_offset_set = 1;
+ pci_dram_offset = res->start;
+ hose->dma_window_base_cur = res->start;
+ hose->dma_window_size = resource_size(res);
+
+ printk(KERN_INFO "4xx PCI DMA offset set to 0x%08lx\n",
+ pci_dram_offset);
+ printk(KERN_INFO "4xx PCI DMA window base to 0x%016llx\n",
+ (unsigned long long)hose->dma_window_base_cur);
+ printk(KERN_INFO "DMA window size 0x%016llx\n",
+ (unsigned long long)hose->dma_window_size);
+ return 0;
+}
+
+/*
+ * 4xx PCI 2.x part
+ */
+
+static int __init ppc4xx_setup_one_pci_PMM(struct pci_controller *hose,
+ void __iomem *reg,
+ u64 plb_addr,
+ u64 pci_addr,
+ u64 size,
+ unsigned int flags,
+ int index)
+{
+ u32 ma, pcila, pciha;
+
+ /* Hack warning ! The "old" PCI 2.x cell only let us configure the low
+ * 32-bit of incoming PLB addresses. The top 4 bits of the 36-bit
+ * address are actually hard wired to a value that appears to depend
+ * on the specific SoC. For example, it's 0 on 440EP and 1 on 440EPx.
+ *
+ * The trick here is we just crop those top bits and ignore them when
+ * programming the chip. That means the device-tree has to be right
+ * for the specific part used (we don't print a warning if it's wrong
+ * but on the other hand, you'll crash quickly enough), but at least
+ * this code should work whatever the hard coded value is
+ */
+ plb_addr &= 0xffffffffull;
+
+ /* Note: Due to the above hack, the test below doesn't actually test
+ * if you address is above 4G, but it tests that address and
+ * (address + size) are both contained in the same 4G
+ */
+ if ((plb_addr + size) > 0xffffffffull || !is_power_of_2(size) ||
+ size < 0x1000 || (plb_addr & (size - 1)) != 0) {
+ printk(KERN_WARNING "%pOF: Resource out of range\n", hose->dn);
+ return -1;
+ }
+ ma = (0xffffffffu << ilog2(size)) | 1;
+ if (flags & IORESOURCE_PREFETCH)
+ ma |= 2;
+
+ pciha = RES_TO_U32_HIGH(pci_addr);
+ pcila = RES_TO_U32_LOW(pci_addr);
+
+ writel(plb_addr, reg + PCIL0_PMM0LA + (0x10 * index));
+ writel(pcila, reg + PCIL0_PMM0PCILA + (0x10 * index));
+ writel(pciha, reg + PCIL0_PMM0PCIHA + (0x10 * index));
+ writel(ma, reg + PCIL0_PMM0MA + (0x10 * index));
+
+ return 0;
+}
+
+static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose,
+ void __iomem *reg)
+{
+ int i, j, found_isa_hole = 0;
+
+ /* Setup outbound memory windows */
+ for (i = j = 0; i < 3; i++) {
+ struct resource *res = &hose->mem_resources[i];
+ resource_size_t offset = hose->mem_offset[i];
+
+ /* we only care about memory windows */
+ if (!(res->flags & IORESOURCE_MEM))
+ continue;
+ if (j > 2) {
+ printk(KERN_WARNING "%pOF: Too many ranges\n", hose->dn);
+ break;
+ }
+
+ /* Configure the resource */
+ if (ppc4xx_setup_one_pci_PMM(hose, reg,
+ res->start,
+ res->start - offset,
+ resource_size(res),
+ res->flags,
+ j) == 0) {
+ j++;
+
+ /* If the resource PCI address is 0 then we have our
+ * ISA memory hole
+ */
+ if (res->start == offset)
+ found_isa_hole = 1;
+ }
+ }
+
+ /* Handle ISA memory hole if not already covered */
+ if (j <= 2 && !found_isa_hole && hose->isa_mem_size)
+ if (ppc4xx_setup_one_pci_PMM(hose, reg, hose->isa_mem_phys, 0,
+ hose->isa_mem_size, 0, j) == 0)
+ printk(KERN_INFO "%pOF: Legacy ISA memory support enabled\n",
+ hose->dn);
+}
+
+static void __init ppc4xx_configure_pci_PTMs(struct pci_controller *hose,
+ void __iomem *reg,
+ const struct resource *res)
+{
+ resource_size_t size = resource_size(res);
+ u32 sa;
+
+ /* Calculate window size */
+ sa = (0xffffffffu << ilog2(size)) | 1;
+ sa |= 0x1;
+
+ /* RAM is always at 0 local for now */
+ writel(0, reg + PCIL0_PTM1LA);
+ writel(sa, reg + PCIL0_PTM1MS);
+
+ /* Map on PCI side */
+ early_write_config_dword(hose, hose->first_busno, 0,
+ PCI_BASE_ADDRESS_1, res->start);
+ early_write_config_dword(hose, hose->first_busno, 0,
+ PCI_BASE_ADDRESS_2, 0x00000000);
+ early_write_config_word(hose, hose->first_busno, 0,
+ PCI_COMMAND, 0x0006);
+}
+
+static void __init ppc4xx_probe_pci_bridge(struct device_node *np)
+{
+ /* NYI */
+ struct resource rsrc_cfg;
+ struct resource rsrc_reg;
+ struct resource dma_window;
+ struct pci_controller *hose = NULL;
+ void __iomem *reg = NULL;
+ const int *bus_range;
+ int primary = 0;
+
+ /* Check if device is enabled */
+ if (!of_device_is_available(np)) {
+ printk(KERN_INFO "%pOF: Port disabled via device-tree\n", np);
+ return;
+ }
+
+ /* Fetch config space registers address */
+ if (of_address_to_resource(np, 0, &rsrc_cfg)) {
+ printk(KERN_ERR "%pOF: Can't get PCI config register base !",
+ np);
+ return;
+ }
+ /* Fetch host bridge internal registers address */
+ if (of_address_to_resource(np, 3, &rsrc_reg)) {
+ printk(KERN_ERR "%pOF: Can't get PCI internal register base !",
+ np);
+ return;
+ }
+
+ /* Check if primary bridge */
+ if (of_property_read_bool(np, "primary"))
+ primary = 1;
+
+ /* Get bus range if any */
+ bus_range = of_get_property(np, "bus-range", NULL);
+
+ /* Map registers */
+ reg = ioremap(rsrc_reg.start, resource_size(&rsrc_reg));
+ if (reg == NULL) {
+ printk(KERN_ERR "%pOF: Can't map registers !", np);
+ goto fail;
+ }
+
+ /* Allocate the host controller data structure */
+ hose = pcibios_alloc_controller(np);
+ if (!hose)
+ goto fail;
+
+ hose->first_busno = bus_range ? bus_range[0] : 0x0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ /* Setup config space */
+ setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4, 0);
+
+ /* Disable all windows */
+ writel(0, reg + PCIL0_PMM0MA);
+ writel(0, reg + PCIL0_PMM1MA);
+ writel(0, reg + PCIL0_PMM2MA);
+ writel(0, reg + PCIL0_PTM1MS);
+ writel(0, reg + PCIL0_PTM2MS);
+
+ /* Parse outbound mapping resources */
+ pci_process_bridge_OF_ranges(hose, np, primary);
+
+ /* Parse inbound mapping resources */
+ if (ppc4xx_parse_dma_ranges(hose, reg, &dma_window) != 0)
+ goto fail;
+
+ /* Configure outbound ranges POMs */
+ ppc4xx_configure_pci_PMMs(hose, reg);
+
+ /* Configure inbound ranges PIMs */
+ ppc4xx_configure_pci_PTMs(hose, reg, &dma_window);
+
+ /* We don't need the registers anymore */
+ iounmap(reg);
+ return;
+
+ fail:
+ if (hose)
+ pcibios_free_controller(hose);
+ if (reg)
+ iounmap(reg);
+}
+
+/*
+ * 4xx PCI-X part
+ */
+
+static int __init ppc4xx_setup_one_pcix_POM(struct pci_controller *hose,
+ void __iomem *reg,
+ u64 plb_addr,
+ u64 pci_addr,
+ u64 size,
+ unsigned int flags,
+ int index)
+{
+ u32 lah, lal, pciah, pcial, sa;
+
+ if (!is_power_of_2(size) || size < 0x1000 ||
+ (plb_addr & (size - 1)) != 0) {
+ printk(KERN_WARNING "%pOF: Resource out of range\n",
+ hose->dn);
+ return -1;
+ }
+
+ /* Calculate register values */
+ lah = RES_TO_U32_HIGH(plb_addr);
+ lal = RES_TO_U32_LOW(plb_addr);
+ pciah = RES_TO_U32_HIGH(pci_addr);
+ pcial = RES_TO_U32_LOW(pci_addr);
+ sa = (0xffffffffu << ilog2(size)) | 0x1;
+
+ /* Program register values */
+ if (index == 0) {
+ writel(lah, reg + PCIX0_POM0LAH);
+ writel(lal, reg + PCIX0_POM0LAL);
+ writel(pciah, reg + PCIX0_POM0PCIAH);
+ writel(pcial, reg + PCIX0_POM0PCIAL);
+ writel(sa, reg + PCIX0_POM0SA);
+ } else {
+ writel(lah, reg + PCIX0_POM1LAH);
+ writel(lal, reg + PCIX0_POM1LAL);
+ writel(pciah, reg + PCIX0_POM1PCIAH);
+ writel(pcial, reg + PCIX0_POM1PCIAL);
+ writel(sa, reg + PCIX0_POM1SA);
+ }
+
+ return 0;
+}
+
+static void __init ppc4xx_configure_pcix_POMs(struct pci_controller *hose,
+ void __iomem *reg)
+{
+ int i, j, found_isa_hole = 0;
+
+ /* Setup outbound memory windows */
+ for (i = j = 0; i < 3; i++) {
+ struct resource *res = &hose->mem_resources[i];
+ resource_size_t offset = hose->mem_offset[i];
+
+ /* we only care about memory windows */
+ if (!(res->flags & IORESOURCE_MEM))
+ continue;
+ if (j > 1) {
+ printk(KERN_WARNING "%pOF: Too many ranges\n", hose->dn);
+ break;
+ }
+
+ /* Configure the resource */
+ if (ppc4xx_setup_one_pcix_POM(hose, reg,
+ res->start,
+ res->start - offset,
+ resource_size(res),
+ res->flags,
+ j) == 0) {
+ j++;
+
+ /* If the resource PCI address is 0 then we have our
+ * ISA memory hole
+ */
+ if (res->start == offset)
+ found_isa_hole = 1;
+ }
+ }
+
+ /* Handle ISA memory hole if not already covered */
+ if (j <= 1 && !found_isa_hole && hose->isa_mem_size)
+ if (ppc4xx_setup_one_pcix_POM(hose, reg, hose->isa_mem_phys, 0,
+ hose->isa_mem_size, 0, j) == 0)
+ printk(KERN_INFO "%pOF: Legacy ISA memory support enabled\n",
+ hose->dn);
+}
+
+static void __init ppc4xx_configure_pcix_PIMs(struct pci_controller *hose,
+ void __iomem *reg,
+ const struct resource *res,
+ int big_pim,
+ int enable_msi_hole)
+{
+ resource_size_t size = resource_size(res);
+ u32 sa;
+
+ /* RAM is always at 0 */
+ writel(0x00000000, reg + PCIX0_PIM0LAH);
+ writel(0x00000000, reg + PCIX0_PIM0LAL);
+
+ /* Calculate window size */
+ sa = (0xffffffffu << ilog2(size)) | 1;
+ sa |= 0x1;
+ if (res->flags & IORESOURCE_PREFETCH)
+ sa |= 0x2;
+ if (enable_msi_hole)
+ sa |= 0x4;
+ writel(sa, reg + PCIX0_PIM0SA);
+ if (big_pim)
+ writel(0xffffffff, reg + PCIX0_PIM0SAH);
+
+ /* Map on PCI side */
+ writel(0x00000000, reg + PCIX0_BAR0H);
+ writel(res->start, reg + PCIX0_BAR0L);
+ writew(0x0006, reg + PCIX0_COMMAND);
+}
+
+static void __init ppc4xx_probe_pcix_bridge(struct device_node *np)
+{
+ struct resource rsrc_cfg;
+ struct resource rsrc_reg;
+ struct resource dma_window;
+ struct pci_controller *hose = NULL;
+ void __iomem *reg = NULL;
+ const int *bus_range;
+ int big_pim, msi, primary;
+
+ /* Fetch config space registers address */
+ if (of_address_to_resource(np, 0, &rsrc_cfg)) {
+ printk(KERN_ERR "%pOF: Can't get PCI-X config register base !",
+ np);
+ return;
+ }
+ /* Fetch host bridge internal registers address */
+ if (of_address_to_resource(np, 3, &rsrc_reg)) {
+ printk(KERN_ERR "%pOF: Can't get PCI-X internal register base !",
+ np);
+ return;
+ }
+
+ /* Check if it supports large PIMs (440GX) */
+ big_pim = of_property_read_bool(np, "large-inbound-windows");
+
+ /* Check if we should enable MSIs inbound hole */
+ msi = of_property_read_bool(np, "enable-msi-hole");
+
+ /* Check if primary bridge */
+ primary = of_property_read_bool(np, "primary");
+
+ /* Get bus range if any */
+ bus_range = of_get_property(np, "bus-range", NULL);
+
+ /* Map registers */
+ reg = ioremap(rsrc_reg.start, resource_size(&rsrc_reg));
+ if (reg == NULL) {
+ printk(KERN_ERR "%pOF: Can't map registers !", np);
+ goto fail;
+ }
+
+ /* Allocate the host controller data structure */
+ hose = pcibios_alloc_controller(np);
+ if (!hose)
+ goto fail;
+
+ hose->first_busno = bus_range ? bus_range[0] : 0x0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ /* Setup config space */
+ setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4,
+ PPC_INDIRECT_TYPE_SET_CFG_TYPE);
+
+ /* Disable all windows */
+ writel(0, reg + PCIX0_POM0SA);
+ writel(0, reg + PCIX0_POM1SA);
+ writel(0, reg + PCIX0_POM2SA);
+ writel(0, reg + PCIX0_PIM0SA);
+ writel(0, reg + PCIX0_PIM1SA);
+ writel(0, reg + PCIX0_PIM2SA);
+ if (big_pim) {
+ writel(0, reg + PCIX0_PIM0SAH);
+ writel(0, reg + PCIX0_PIM2SAH);
+ }
+
+ /* Parse outbound mapping resources */
+ pci_process_bridge_OF_ranges(hose, np, primary);
+
+ /* Parse inbound mapping resources */
+ if (ppc4xx_parse_dma_ranges(hose, reg, &dma_window) != 0)
+ goto fail;
+
+ /* Configure outbound ranges POMs */
+ ppc4xx_configure_pcix_POMs(hose, reg);
+
+ /* Configure inbound ranges PIMs */
+ ppc4xx_configure_pcix_PIMs(hose, reg, &dma_window, big_pim, msi);
+
+ /* We don't need the registers anymore */
+ iounmap(reg);
+ return;
+
+ fail:
+ if (hose)
+ pcibios_free_controller(hose);
+ if (reg)
+ iounmap(reg);
+}
+
+#ifdef CONFIG_PPC4xx_PCI_EXPRESS
+
+/*
+ * 4xx PCI-Express part
+ *
+ * We support 3 parts currently based on the compatible property:
+ *
+ * ibm,plb-pciex-440spe
+ * ibm,plb-pciex-405ex
+ * ibm,plb-pciex-460ex
+ *
+ * Anything else will be rejected for now as they are all subtly
+ * different unfortunately.
+ *
+ */
+
+#define MAX_PCIE_BUS_MAPPED 0x40
+
+struct ppc4xx_pciex_port
+{
+ struct pci_controller *hose;
+ struct device_node *node;
+ unsigned int index;
+ int endpoint;
+ int link;
+ int has_ibpre;
+ unsigned int sdr_base;
+ dcr_host_t dcrs;
+ struct resource cfg_space;
+ struct resource utl_regs;
+ void __iomem *utl_base;
+};
+
+static struct ppc4xx_pciex_port *ppc4xx_pciex_ports;
+static unsigned int ppc4xx_pciex_port_count;
+
+struct ppc4xx_pciex_hwops
+{
+ bool want_sdr;
+ int (*core_init)(struct device_node *np);
+ int (*port_init_hw)(struct ppc4xx_pciex_port *port);
+ int (*setup_utl)(struct ppc4xx_pciex_port *port);
+ void (*check_link)(struct ppc4xx_pciex_port *port);
+};
+
+static struct ppc4xx_pciex_hwops *ppc4xx_pciex_hwops;
+
+static int __init ppc4xx_pciex_wait_on_sdr(struct ppc4xx_pciex_port *port,
+ unsigned int sdr_offset,
+ unsigned int mask,
+ unsigned int value,
+ int timeout_ms)
+{
+ u32 val;
+
+ while(timeout_ms--) {
+ val = mfdcri(SDR0, port->sdr_base + sdr_offset);
+ if ((val & mask) == value) {
+ pr_debug("PCIE%d: Wait on SDR %x success with tm %d (%08x)\n",
+ port->index, sdr_offset, timeout_ms, val);
+ return 0;
+ }
+ msleep(1);
+ }
+ return -1;
+}
+
+static int __init ppc4xx_pciex_port_reset_sdr(struct ppc4xx_pciex_port *port)
+{
+ /* Wait for reset to complete */
+ if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, 1 << 20, 0, 10)) {
+ printk(KERN_WARNING "PCIE%d: PGRST failed\n",
+ port->index);
+ return -1;
+ }
+ return 0;
+}
+
+
+static void __init ppc4xx_pciex_check_link_sdr(struct ppc4xx_pciex_port *port)
+{
+ printk(KERN_INFO "PCIE%d: Checking link...\n", port->index);
+
+ /* Check for card presence detect if supported, if not, just wait for
+ * link unconditionally.
+ *
+ * note that we don't fail if there is no link, we just filter out
+ * config space accesses. That way, it will be easier to implement
+ * hotplug later on.
+ */
+ if (!port->has_ibpre ||
+ !ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP,
+ 1 << 28, 1 << 28, 100)) {
+ printk(KERN_INFO
+ "PCIE%d: Device detected, waiting for link...\n",
+ port->index);
+ if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP,
+ 0x1000, 0x1000, 2000))
+ printk(KERN_WARNING
+ "PCIE%d: Link up failed\n", port->index);
+ else {
+ printk(KERN_INFO
+ "PCIE%d: link is up !\n", port->index);
+ port->link = 1;
+ }
+ } else
+ printk(KERN_INFO "PCIE%d: No device detected.\n", port->index);
+}
+
+#ifdef CONFIG_44x
+
+/* Check various reset bits of the 440SPe PCIe core */
+static int __init ppc440spe_pciex_check_reset(struct device_node *np)
+{
+ u32 valPE0, valPE1, valPE2;
+ int err = 0;
+
+ /* SDR0_PEGPLLLCT1 reset */
+ if (!(mfdcri(SDR0, PESDR0_PLLLCT1) & 0x01000000)) {
+ /*
+ * the PCIe core was probably already initialised
+ * by firmware - let's re-reset RCSSET regs
+ *
+ * -- Shouldn't we also re-reset the whole thing ? -- BenH
+ */
+ pr_debug("PCIE: SDR0_PLLLCT1 already reset.\n");
+ mtdcri(SDR0, PESDR0_440SPE_RCSSET, 0x01010000);
+ mtdcri(SDR0, PESDR1_440SPE_RCSSET, 0x01010000);
+ mtdcri(SDR0, PESDR2_440SPE_RCSSET, 0x01010000);
+ }
+
+ valPE0 = mfdcri(SDR0, PESDR0_440SPE_RCSSET);
+ valPE1 = mfdcri(SDR0, PESDR1_440SPE_RCSSET);
+ valPE2 = mfdcri(SDR0, PESDR2_440SPE_RCSSET);
+
+ /* SDR0_PExRCSSET rstgu */
+ if (!(valPE0 & 0x01000000) ||
+ !(valPE1 & 0x01000000) ||
+ !(valPE2 & 0x01000000)) {
+ printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstgu error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rstdl */
+ if (!(valPE0 & 0x00010000) ||
+ !(valPE1 & 0x00010000) ||
+ !(valPE2 & 0x00010000)) {
+ printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstdl error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rstpyn */
+ if ((valPE0 & 0x00001000) ||
+ (valPE1 & 0x00001000) ||
+ (valPE2 & 0x00001000)) {
+ printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstpyn error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET hldplb */
+ if ((valPE0 & 0x10000000) ||
+ (valPE1 & 0x10000000) ||
+ (valPE2 & 0x10000000)) {
+ printk(KERN_INFO "PCIE: SDR0_PExRCSSET hldplb error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rdy */
+ if ((valPE0 & 0x00100000) ||
+ (valPE1 & 0x00100000) ||
+ (valPE2 & 0x00100000)) {
+ printk(KERN_INFO "PCIE: SDR0_PExRCSSET rdy error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET shutdown */
+ if ((valPE0 & 0x00000100) ||
+ (valPE1 & 0x00000100) ||
+ (valPE2 & 0x00000100)) {
+ printk(KERN_INFO "PCIE: SDR0_PExRCSSET shutdown error\n");
+ err = -1;
+ }
+
+ return err;
+}
+
+/* Global PCIe core initializations for 440SPe core */
+static int __init ppc440spe_pciex_core_init(struct device_node *np)
+{
+ int time_out = 20;
+
+ /* Set PLL clock receiver to LVPECL */
+ dcri_clrset(SDR0, PESDR0_PLLLCT1, 0, 1 << 28);
+
+ /* Shouldn't we do all the calibration stuff etc... here ? */
+ if (ppc440spe_pciex_check_reset(np))
+ return -ENXIO;
+
+ if (!(mfdcri(SDR0, PESDR0_PLLLCT2) & 0x10000)) {
+ printk(KERN_INFO "PCIE: PESDR_PLLCT2 resistance calibration "
+ "failed (0x%08x)\n",
+ mfdcri(SDR0, PESDR0_PLLLCT2));
+ return -1;
+ }
+
+ /* De-assert reset of PCIe PLL, wait for lock */
+ dcri_clrset(SDR0, PESDR0_PLLLCT1, 1 << 24, 0);
+ udelay(3);
+
+ while (time_out) {
+ if (!(mfdcri(SDR0, PESDR0_PLLLCT3) & 0x10000000)) {
+ time_out--;
+ udelay(1);
+ } else
+ break;
+ }
+ if (!time_out) {
+ printk(KERN_INFO "PCIE: VCO output not locked\n");
+ return -1;
+ }
+
+ pr_debug("PCIE initialization OK\n");
+
+ return 3;
+}
+
+static int __init ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+ u32 val = 1 << 24;
+
+ if (port->endpoint)
+ val = PTYPE_LEGACY_ENDPOINT << 20;
+ else
+ val = PTYPE_ROOT_PORT << 20;
+
+ if (port->index == 0)
+ val |= LNKW_X8 << 12;
+ else
+ val |= LNKW_X4 << 12;
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x20222222);
+ if (ppc440spe_revA())
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x11000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL0SET1, 0x35000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL1SET1, 0x35000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL2SET1, 0x35000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL3SET1, 0x35000000);
+ if (port->index == 0) {
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL4SET1,
+ 0x35000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL5SET1,
+ 0x35000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL6SET1,
+ 0x35000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL7SET1,
+ 0x35000000);
+ }
+ dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
+ (1 << 24) | (1 << 16), 1 << 12);
+
+ return ppc4xx_pciex_port_reset_sdr(port);
+}
+
+static int __init ppc440speA_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+ return ppc440spe_pciex_init_port_hw(port);
+}
+
+static int __init ppc440speB_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+ int rc = ppc440spe_pciex_init_port_hw(port);
+
+ port->has_ibpre = 1;
+
+ return rc;
+}
+
+static int ppc440speA_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+ /* XXX Check what that value means... I hate magic */
+ dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x68782800);
+
+ /*
+ * Set buffer allocations and then assert VRB and TXE.
+ */
+ out_be32(port->utl_base + PEUTL_OUTTR, 0x08000000);
+ out_be32(port->utl_base + PEUTL_INTR, 0x02000000);
+ out_be32(port->utl_base + PEUTL_OPDBSZ, 0x10000000);
+ out_be32(port->utl_base + PEUTL_PBBSZ, 0x53000000);
+ out_be32(port->utl_base + PEUTL_IPHBSZ, 0x08000000);
+ out_be32(port->utl_base + PEUTL_IPDBSZ, 0x10000000);
+ out_be32(port->utl_base + PEUTL_RCIRQEN, 0x00f00000);
+ out_be32(port->utl_base + PEUTL_PCTL, 0x80800066);
+
+ return 0;
+}
+
+static int ppc440speB_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+ /* Report CRS to the operating system */
+ out_be32(port->utl_base + PEUTL_PBCTL, 0x08000000);
+
+ return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata =
+{
+ .want_sdr = true,
+ .core_init = ppc440spe_pciex_core_init,
+ .port_init_hw = ppc440speA_pciex_init_port_hw,
+ .setup_utl = ppc440speA_pciex_init_utl,
+ .check_link = ppc4xx_pciex_check_link_sdr,
+};
+
+static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata =
+{
+ .want_sdr = true,
+ .core_init = ppc440spe_pciex_core_init,
+ .port_init_hw = ppc440speB_pciex_init_port_hw,
+ .setup_utl = ppc440speB_pciex_init_utl,
+ .check_link = ppc4xx_pciex_check_link_sdr,
+};
+
+static int __init ppc460ex_pciex_core_init(struct device_node *np)
+{
+ /* Nothing to do, return 2 ports */
+ return 2;
+}
+
+static int __init ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+ u32 val;
+ u32 utlset1;
+
+ if (port->endpoint)
+ val = PTYPE_LEGACY_ENDPOINT << 20;
+ else
+ val = PTYPE_ROOT_PORT << 20;
+
+ if (port->index == 0) {
+ val |= LNKW_X1 << 12;
+ utlset1 = 0x20000000;
+ } else {
+ val |= LNKW_X4 << 12;
+ utlset1 = 0x20101101;
+ }
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, utlset1);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01210000);
+
+ switch (port->index) {
+ case 0:
+ mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
+ mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
+
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST,0x10000000);
+ break;
+
+ case 1:
+ mtdcri(SDR0, PESDR1_460EX_L0CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L1CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L2CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L3CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L0DRV, 0x00000130);
+ mtdcri(SDR0, PESDR1_460EX_L1DRV, 0x00000130);
+ mtdcri(SDR0, PESDR1_460EX_L2DRV, 0x00000130);
+ mtdcri(SDR0, PESDR1_460EX_L3DRV, 0x00000130);
+ mtdcri(SDR0, PESDR1_460EX_L0CLK, 0x00000006);
+ mtdcri(SDR0, PESDR1_460EX_L1CLK, 0x00000006);
+ mtdcri(SDR0, PESDR1_460EX_L2CLK, 0x00000006);
+ mtdcri(SDR0, PESDR1_460EX_L3CLK, 0x00000006);
+
+ mtdcri(SDR0, PESDR1_460EX_PHY_CTL_RST,0x10000000);
+ break;
+ }
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
+ (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
+
+ /* Poll for PHY reset */
+ /* XXX FIXME add timeout */
+ switch (port->index) {
+ case 0:
+ while (!(mfdcri(SDR0, PESDR0_460EX_RSTSTA) & 0x1))
+ udelay(10);
+ break;
+ case 1:
+ while (!(mfdcri(SDR0, PESDR1_460EX_RSTSTA) & 0x1))
+ udelay(10);
+ break;
+ }
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ (mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) &
+ ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
+ PESDRx_RCSSET_RSTPYN);
+
+ port->has_ibpre = 1;
+
+ return ppc4xx_pciex_port_reset_sdr(port);
+}
+
+static int ppc460ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+ dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0);
+
+ /*
+ * Set buffer allocations and then assert VRB and TXE.
+ */
+ out_be32(port->utl_base + PEUTL_PBCTL, 0x0800000c);
+ out_be32(port->utl_base + PEUTL_OUTTR, 0x08000000);
+ out_be32(port->utl_base + PEUTL_INTR, 0x02000000);
+ out_be32(port->utl_base + PEUTL_OPDBSZ, 0x04000000);
+ out_be32(port->utl_base + PEUTL_PBBSZ, 0x00000000);
+ out_be32(port->utl_base + PEUTL_IPHBSZ, 0x02000000);
+ out_be32(port->utl_base + PEUTL_IPDBSZ, 0x04000000);
+ out_be32(port->utl_base + PEUTL_RCIRQEN,0x00f00000);
+ out_be32(port->utl_base + PEUTL_PCTL, 0x80800066);
+
+ return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
+{
+ .want_sdr = true,
+ .core_init = ppc460ex_pciex_core_init,
+ .port_init_hw = ppc460ex_pciex_init_port_hw,
+ .setup_utl = ppc460ex_pciex_init_utl,
+ .check_link = ppc4xx_pciex_check_link_sdr,
+};
+
+static int __init apm821xx_pciex_core_init(struct device_node *np)
+{
+ /* Return the number of pcie port */
+ return 1;
+}
+
+static int __init apm821xx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+ u32 val;
+
+ /*
+ * Do a software reset on PCIe ports.
+ * This code is to fix the issue that pci drivers doesn't re-assign
+ * bus number for PCIE devices after Uboot
+ * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
+ * PT quad port, SAS LSI 1064E)
+ */
+
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
+ mdelay(10);
+
+ if (port->endpoint)
+ val = PTYPE_LEGACY_ENDPOINT << 20;
+ else
+ val = PTYPE_ROOT_PORT << 20;
+
+ val |= LNKW_X1 << 12;
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x00000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01010000);
+
+ mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
+ mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
+
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
+ mdelay(50);
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
+ (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
+
+ /* Poll for PHY reset */
+ val = PESDR0_460EX_RSTSTA - port->sdr_base;
+ if (ppc4xx_pciex_wait_on_sdr(port, val, 0x1, 1, 100)) {
+ printk(KERN_WARNING "%s: PCIE: Can't reset PHY\n", __func__);
+ return -EBUSY;
+ } else {
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ (mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) &
+ ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
+ PESDRx_RCSSET_RSTPYN);
+
+ port->has_ibpre = 1;
+ return 0;
+ }
+}
+
+static struct ppc4xx_pciex_hwops apm821xx_pcie_hwops __initdata = {
+ .want_sdr = true,
+ .core_init = apm821xx_pciex_core_init,
+ .port_init_hw = apm821xx_pciex_init_port_hw,
+ .setup_utl = ppc460ex_pciex_init_utl,
+ .check_link = ppc4xx_pciex_check_link_sdr,
+};
+
+static int __init ppc460sx_pciex_core_init(struct device_node *np)
+{
+ /* HSS drive amplitude */
+ mtdcri(SDR0, PESDR0_460SX_HSSL0DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR0_460SX_HSSL1DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR0_460SX_HSSL2DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR0_460SX_HSSL3DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR0_460SX_HSSL4DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR0_460SX_HSSL5DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR0_460SX_HSSL6DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR0_460SX_HSSL7DAMP, 0xB9843211);
+
+ mtdcri(SDR0, PESDR1_460SX_HSSL0DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR1_460SX_HSSL1DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR1_460SX_HSSL2DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR1_460SX_HSSL3DAMP, 0xB9843211);
+
+ mtdcri(SDR0, PESDR2_460SX_HSSL0DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR2_460SX_HSSL1DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR2_460SX_HSSL2DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR2_460SX_HSSL3DAMP, 0xB9843211);
+
+ /* HSS TX pre-emphasis */
+ mtdcri(SDR0, PESDR0_460SX_HSSL0COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR0_460SX_HSSL1COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR0_460SX_HSSL2COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR0_460SX_HSSL3COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR0_460SX_HSSL4COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR0_460SX_HSSL5COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR0_460SX_HSSL6COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR0_460SX_HSSL7COEFA, 0xDCB98987);
+
+ mtdcri(SDR0, PESDR1_460SX_HSSL0COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR1_460SX_HSSL1COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR1_460SX_HSSL2COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR1_460SX_HSSL3COEFA, 0xDCB98987);
+
+ mtdcri(SDR0, PESDR2_460SX_HSSL0COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR2_460SX_HSSL1COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR2_460SX_HSSL2COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR2_460SX_HSSL3COEFA, 0xDCB98987);
+
+ /* HSS TX calibration control */
+ mtdcri(SDR0, PESDR0_460SX_HSSL1CALDRV, 0x22222222);
+ mtdcri(SDR0, PESDR1_460SX_HSSL1CALDRV, 0x22220000);
+ mtdcri(SDR0, PESDR2_460SX_HSSL1CALDRV, 0x22220000);
+
+ /* HSS TX slew control */
+ mtdcri(SDR0, PESDR0_460SX_HSSSLEW, 0xFFFFFFFF);
+ mtdcri(SDR0, PESDR1_460SX_HSSSLEW, 0xFFFF0000);
+ mtdcri(SDR0, PESDR2_460SX_HSSSLEW, 0xFFFF0000);
+
+ /* Set HSS PRBS enabled */
+ mtdcri(SDR0, PESDR0_460SX_HSSCTLSET, 0x00001130);
+ mtdcri(SDR0, PESDR2_460SX_HSSCTLSET, 0x00001130);
+
+ udelay(100);
+
+ /* De-assert PLLRESET */
+ dcri_clrset(SDR0, PESDR0_PLLLCT2, 0x00000100, 0);
+
+ /* Reset DL, UTL, GPL before configuration */
+ mtdcri(SDR0, PESDR0_460SX_RCSSET,
+ PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
+ mtdcri(SDR0, PESDR1_460SX_RCSSET,
+ PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
+ mtdcri(SDR0, PESDR2_460SX_RCSSET,
+ PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
+
+ udelay(100);
+
+ /*
+ * If bifurcation is not enabled, u-boot would have disabled the
+ * third PCIe port
+ */
+ if (((mfdcri(SDR0, PESDR1_460SX_HSSCTLSET) & 0x00000001) ==
+ 0x00000001)) {
+ printk(KERN_INFO "PCI: PCIE bifurcation setup successfully.\n");
+ printk(KERN_INFO "PCI: Total 3 PCIE ports are present\n");
+ return 3;
+ }
+
+ printk(KERN_INFO "PCI: Total 2 PCIE ports are present\n");
+ return 2;
+}
+
+static int __init ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+
+ if (port->endpoint)
+ dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
+ 0x01000000, 0);
+ else
+ dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
+ 0, 0x01000000);
+
+ dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
+ (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL),
+ PESDRx_RCSSET_RSTPYN);
+
+ port->has_ibpre = 1;
+
+ return ppc4xx_pciex_port_reset_sdr(port);
+}
+
+static int ppc460sx_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+ /* Max 128 Bytes */
+ out_be32 (port->utl_base + PEUTL_PBBSZ, 0x00000000);
+ /* Assert VRB and TXE - per datasheet turn off addr validation */
+ out_be32(port->utl_base + PEUTL_PCTL, 0x80800000);
+ return 0;
+}
+
+static void __init ppc460sx_pciex_check_link(struct ppc4xx_pciex_port *port)
+{
+ void __iomem *mbase;
+ int attempt = 50;
+
+ port->link = 0;
+
+ mbase = ioremap(port->cfg_space.start + 0x10000000, 0x1000);
+ if (mbase == NULL) {
+ printk(KERN_ERR "%pOF: Can't map internal config space !",
+ port->node);
+ return;
+ }
+
+ while (attempt && (0 == (in_le32(mbase + PECFG_460SX_DLLSTA)
+ & PECFG_460SX_DLLSTA_LINKUP))) {
+ attempt--;
+ mdelay(10);
+ }
+ if (attempt)
+ port->link = 1;
+ iounmap(mbase);
+}
+
+static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
+ .want_sdr = true,
+ .core_init = ppc460sx_pciex_core_init,
+ .port_init_hw = ppc460sx_pciex_init_port_hw,
+ .setup_utl = ppc460sx_pciex_init_utl,
+ .check_link = ppc460sx_pciex_check_link,
+};
+
+#endif /* CONFIG_44x */
+
+#ifdef CONFIG_40x
+
+static int __init ppc405ex_pciex_core_init(struct device_node *np)
+{
+ /* Nothing to do, return 2 ports */
+ return 2;
+}
+
+static void __init ppc405ex_pcie_phy_reset(struct ppc4xx_pciex_port *port)
+{
+ /* Assert the PE0_PHY reset */
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01010000);
+ msleep(1);
+
+ /* deassert the PE0_hotreset */
+ if (port->endpoint)
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01111000);
+ else
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01101000);
+
+ /* poll for phy !reset */
+ /* XXX FIXME add timeout */
+ while (!(mfdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSTA) & 0x00001000))
+ ;
+
+ /* deassert the PE0_gpl_utl_reset */
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x00101000);
+}
+
+static int __init ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+ u32 val;
+
+ if (port->endpoint)
+ val = PTYPE_LEGACY_ENDPOINT;
+ else
+ val = PTYPE_ROOT_PORT;
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET,
+ 1 << 24 | val << 20 | LNKW_X1 << 12);
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x00000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01010000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSET1, 0x720F0000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSET2, 0x70600003);
+
+ /*
+ * Only reset the PHY when no link is currently established.
+ * This is for the Atheros PCIe board which has problems to establish
+ * the link (again) after this PHY reset. All other currently tested
+ * PCIe boards don't show this problem.
+ * This has to be re-tested and fixed in a later release!
+ */
+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
+ if (!(val & 0x00001000))
+ ppc405ex_pcie_phy_reset(port);
+
+ dcr_write(port->dcrs, DCRO_PEGPL_CFG, 0x10000000); /* guarded on */
+
+ port->has_ibpre = 1;
+
+ return ppc4xx_pciex_port_reset_sdr(port);
+}
+
+static int ppc405ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+ dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0);
+
+ /*
+ * Set buffer allocations and then assert VRB and TXE.
+ */
+ out_be32(port->utl_base + PEUTL_OUTTR, 0x02000000);
+ out_be32(port->utl_base + PEUTL_INTR, 0x02000000);
+ out_be32(port->utl_base + PEUTL_OPDBSZ, 0x04000000);
+ out_be32(port->utl_base + PEUTL_PBBSZ, 0x21000000);
+ out_be32(port->utl_base + PEUTL_IPHBSZ, 0x02000000);
+ out_be32(port->utl_base + PEUTL_IPDBSZ, 0x04000000);
+ out_be32(port->utl_base + PEUTL_RCIRQEN, 0x00f00000);
+ out_be32(port->utl_base + PEUTL_PCTL, 0x80800066);
+
+ out_be32(port->utl_base + PEUTL_PBCTL, 0x08000000);
+
+ return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata =
+{
+ .want_sdr = true,
+ .core_init = ppc405ex_pciex_core_init,
+ .port_init_hw = ppc405ex_pciex_init_port_hw,
+ .setup_utl = ppc405ex_pciex_init_utl,
+ .check_link = ppc4xx_pciex_check_link_sdr,
+};
+
+#endif /* CONFIG_40x */
+
+#ifdef CONFIG_476FPE
+static int __init ppc_476fpe_pciex_core_init(struct device_node *np)
+{
+ return 4;
+}
+
+static void __init ppc_476fpe_pciex_check_link(struct ppc4xx_pciex_port *port)
+{
+ u32 timeout_ms = 20;
+ u32 val = 0, mask = (PECFG_TLDLP_LNKUP|PECFG_TLDLP_PRESENT);
+ void __iomem *mbase = ioremap(port->cfg_space.start + 0x10000000,
+ 0x1000);
+
+ printk(KERN_INFO "PCIE%d: Checking link...\n", port->index);
+
+ if (mbase == NULL) {
+ printk(KERN_WARNING "PCIE%d: failed to get cfg space\n",
+ port->index);
+ return;
+ }
+
+ while (timeout_ms--) {
+ val = in_le32(mbase + PECFG_TLDLP);
+
+ if ((val & mask) == mask)
+ break;
+ msleep(10);
+ }
+
+ if (val & PECFG_TLDLP_PRESENT) {
+ printk(KERN_INFO "PCIE%d: link is up !\n", port->index);
+ port->link = 1;
+ } else
+ printk(KERN_WARNING "PCIE%d: Link up failed\n", port->index);
+
+ iounmap(mbase);
+}
+
+static struct ppc4xx_pciex_hwops ppc_476fpe_pcie_hwops __initdata =
+{
+ .core_init = ppc_476fpe_pciex_core_init,
+ .check_link = ppc_476fpe_pciex_check_link,
+};
+#endif /* CONFIG_476FPE */
+
+/* Check that the core has been initied and if not, do it */
+static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
+{
+ static int core_init;
+ int count = -ENODEV;
+
+ if (core_init++)
+ return 0;
+
+#ifdef CONFIG_44x
+ if (of_device_is_compatible(np, "ibm,plb-pciex-440spe")) {
+ if (ppc440spe_revA())
+ ppc4xx_pciex_hwops = &ppc440speA_pcie_hwops;
+ else
+ ppc4xx_pciex_hwops = &ppc440speB_pcie_hwops;
+ }
+ if (of_device_is_compatible(np, "ibm,plb-pciex-460ex"))
+ ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops;
+ if (of_device_is_compatible(np, "ibm,plb-pciex-460sx"))
+ ppc4xx_pciex_hwops = &ppc460sx_pcie_hwops;
+ if (of_device_is_compatible(np, "ibm,plb-pciex-apm821xx"))
+ ppc4xx_pciex_hwops = &apm821xx_pcie_hwops;
+#endif /* CONFIG_44x */
+#ifdef CONFIG_40x
+ if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
+ ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops;
+#endif
+#ifdef CONFIG_476FPE
+ if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe")
+ || of_device_is_compatible(np, "ibm,plb-pciex-476gtr"))
+ ppc4xx_pciex_hwops = &ppc_476fpe_pcie_hwops;
+#endif
+ if (ppc4xx_pciex_hwops == NULL) {
+ printk(KERN_WARNING "PCIE: unknown host type %pOF\n", np);
+ return -ENODEV;
+ }
+
+ count = ppc4xx_pciex_hwops->core_init(np);
+ if (count > 0) {
+ ppc4xx_pciex_ports =
+ kcalloc(count, sizeof(struct ppc4xx_pciex_port),
+ GFP_KERNEL);
+ if (ppc4xx_pciex_ports) {
+ ppc4xx_pciex_port_count = count;
+ return 0;
+ }
+ printk(KERN_WARNING "PCIE: failed to allocate ports array\n");
+ return -ENOMEM;
+ }
+ return -ENODEV;
+}
+
+static void __init ppc4xx_pciex_port_init_mapping(struct ppc4xx_pciex_port *port)
+{
+ /* We map PCI Express configuration based on the reg property */
+ dcr_write(port->dcrs, DCRO_PEGPL_CFGBAH,
+ RES_TO_U32_HIGH(port->cfg_space.start));
+ dcr_write(port->dcrs, DCRO_PEGPL_CFGBAL,
+ RES_TO_U32_LOW(port->cfg_space.start));
+
+ /* XXX FIXME: Use size from reg property. For now, map 512M */
+ dcr_write(port->dcrs, DCRO_PEGPL_CFGMSK, 0xe0000001);
+
+ /* We map UTL registers based on the reg property */
+ dcr_write(port->dcrs, DCRO_PEGPL_REGBAH,
+ RES_TO_U32_HIGH(port->utl_regs.start));
+ dcr_write(port->dcrs, DCRO_PEGPL_REGBAL,
+ RES_TO_U32_LOW(port->utl_regs.start));
+
+ /* XXX FIXME: Use size from reg property */
+ dcr_write(port->dcrs, DCRO_PEGPL_REGMSK, 0x00007001);
+
+ /* Disable all other outbound windows */
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, 0);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, 0);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, 0);
+ dcr_write(port->dcrs, DCRO_PEGPL_MSGMSK, 0);
+}
+
+static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port)
+{
+ int rc = 0;
+
+ /* Init HW */
+ if (ppc4xx_pciex_hwops->port_init_hw)
+ rc = ppc4xx_pciex_hwops->port_init_hw(port);
+ if (rc != 0)
+ return rc;
+
+ /*
+ * Initialize mapping: disable all regions and configure
+ * CFG and REG regions based on resources in the device tree
+ */
+ ppc4xx_pciex_port_init_mapping(port);
+
+ if (ppc4xx_pciex_hwops->check_link)
+ ppc4xx_pciex_hwops->check_link(port);
+
+ /*
+ * Map UTL
+ */
+ port->utl_base = ioremap(port->utl_regs.start, 0x100);
+ BUG_ON(port->utl_base == NULL);
+
+ /*
+ * Setup UTL registers --BenH.
+ */
+ if (ppc4xx_pciex_hwops->setup_utl)
+ ppc4xx_pciex_hwops->setup_utl(port);
+
+ /*
+ * Check for VC0 active or PLL Locked and assert RDY.
+ */
+ if (port->sdr_base) {
+ if (of_device_is_compatible(port->node,
+ "ibm,plb-pciex-460sx")){
+ if (port->link && ppc4xx_pciex_wait_on_sdr(port,
+ PESDRn_RCSSTS,
+ 1 << 12, 1 << 12, 5000)) {
+ printk(KERN_INFO "PCIE%d: PLL not locked\n",
+ port->index);
+ port->link = 0;
+ }
+ } else if (port->link &&
+ ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS,
+ 1 << 16, 1 << 16, 5000)) {
+ printk(KERN_INFO "PCIE%d: VC0 not active\n",
+ port->index);
+ port->link = 0;
+ }
+
+ dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, 0, 1 << 20);
+ }
+
+ msleep(100);
+
+ return 0;
+}
+
+static int ppc4xx_pciex_validate_bdf(struct ppc4xx_pciex_port *port,
+ struct pci_bus *bus,
+ unsigned int devfn)
+{
+ static int message;
+
+ /* Endpoint can not generate upstream(remote) config cycles */
+ if (port->endpoint && bus->number != port->hose->first_busno)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /* Check we are within the mapped range */
+ if (bus->number > port->hose->last_busno) {
+ if (!message) {
+ printk(KERN_WARNING "Warning! Probing bus %u"
+ " out of range !\n", bus->number);
+ message++;
+ }
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ /* The root complex has only one device / function */
+ if (bus->number == port->hose->first_busno && devfn != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /* The other side of the RC has only one device as well */
+ if (bus->number == (port->hose->first_busno + 1) &&
+ PCI_SLOT(devfn) != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /* Check if we have a link */
+ if ((bus->number != port->hose->first_busno) && !port->link)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return 0;
+}
+
+static void __iomem *ppc4xx_pciex_get_config_base(struct ppc4xx_pciex_port *port,
+ struct pci_bus *bus,
+ unsigned int devfn)
+{
+ int relbus;
+
+ /* Remove the casts when we finally remove the stupid volatile
+ * in struct pci_controller
+ */
+ if (bus->number == port->hose->first_busno)
+ return (void __iomem *)port->hose->cfg_addr;
+
+ relbus = bus->number - (port->hose->first_busno + 1);
+ return (void __iomem *)port->hose->cfg_data +
+ ((relbus << 20) | (devfn << 12));
+}
+
+static int ppc4xx_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ struct ppc4xx_pciex_port *port =
+ &ppc4xx_pciex_ports[hose->indirect_type];
+ void __iomem *addr;
+ u32 gpl_cfg;
+
+ BUG_ON(hose != port->hose);
+
+ if (ppc4xx_pciex_validate_bdf(port, bus, devfn) != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ addr = ppc4xx_pciex_get_config_base(port, bus, devfn);
+
+ /*
+ * Reading from configuration space of non-existing device can
+ * generate transaction errors. For the read duration we suppress
+ * assertion of machine check exceptions to avoid those.
+ */
+ gpl_cfg = dcr_read(port->dcrs, DCRO_PEGPL_CFG);
+ dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg | GPL_DMER_MASK_DISA);
+
+ /* Make sure no CRS is recorded */
+ out_be32(port->utl_base + PEUTL_RCSTA, 0x00040000);
+
+ switch (len) {
+ case 1:
+ *val = in_8((u8 *)(addr + offset));
+ break;
+ case 2:
+ *val = in_le16((u16 *)(addr + offset));
+ break;
+ default:
+ *val = in_le32((u32 *)(addr + offset));
+ break;
+ }
+
+ pr_debug("pcie-config-read: bus=%3d [%3d..%3d] devfn=0x%04x"
+ " offset=0x%04x len=%d, addr=0x%p val=0x%08x\n",
+ bus->number, hose->first_busno, hose->last_busno,
+ devfn, offset, len, addr + offset, *val);
+
+ /* Check for CRS (440SPe rev B does that for us but heh ..) */
+ if (in_be32(port->utl_base + PEUTL_RCSTA) & 0x00040000) {
+ pr_debug("Got CRS !\n");
+ if (len != 4 || offset != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ *val = 0xffff0001;
+ }
+
+ dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int ppc4xx_pciex_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ struct ppc4xx_pciex_port *port =
+ &ppc4xx_pciex_ports[hose->indirect_type];
+ void __iomem *addr;
+ u32 gpl_cfg;
+
+ if (ppc4xx_pciex_validate_bdf(port, bus, devfn) != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ addr = ppc4xx_pciex_get_config_base(port, bus, devfn);
+
+ /*
+ * Reading from configuration space of non-existing device can
+ * generate transaction errors. For the read duration we suppress
+ * assertion of machine check exceptions to avoid those.
+ */
+ gpl_cfg = dcr_read(port->dcrs, DCRO_PEGPL_CFG);
+ dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg | GPL_DMER_MASK_DISA);
+
+ pr_debug("pcie-config-write: bus=%3d [%3d..%3d] devfn=0x%04x"
+ " offset=0x%04x len=%d, addr=0x%p val=0x%08x\n",
+ bus->number, hose->first_busno, hose->last_busno,
+ devfn, offset, len, addr + offset, val);
+
+ switch (len) {
+ case 1:
+ out_8((u8 *)(addr + offset), val);
+ break;
+ case 2:
+ out_le16((u16 *)(addr + offset), val);
+ break;
+ default:
+ out_le32((u32 *)(addr + offset), val);
+ break;
+ }
+
+ dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops ppc4xx_pciex_pci_ops =
+{
+ .read = ppc4xx_pciex_read_config,
+ .write = ppc4xx_pciex_write_config,
+};
+
+static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port *port,
+ struct pci_controller *hose,
+ void __iomem *mbase,
+ u64 plb_addr,
+ u64 pci_addr,
+ u64 size,
+ unsigned int flags,
+ int index)
+{
+ u32 lah, lal, pciah, pcial, sa;
+
+ if (!is_power_of_2(size) ||
+ (index < 2 && size < 0x100000) ||
+ (index == 2 && size < 0x100) ||
+ (plb_addr & (size - 1)) != 0) {
+ printk(KERN_WARNING "%pOF: Resource out of range\n", hose->dn);
+ return -1;
+ }
+
+ /* Calculate register values */
+ lah = RES_TO_U32_HIGH(plb_addr);
+ lal = RES_TO_U32_LOW(plb_addr);
+ pciah = RES_TO_U32_HIGH(pci_addr);
+ pcial = RES_TO_U32_LOW(pci_addr);
+ sa = (0xffffffffu << ilog2(size)) | 0x1;
+
+ /* Program register values */
+ switch (index) {
+ case 0:
+ out_le32(mbase + PECFG_POM0LAH, pciah);
+ out_le32(mbase + PECFG_POM0LAL, pcial);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAH, lah);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAL, lal);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKH, 0x7fffffff);
+ /*Enabled and single region */
+ if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
+ sa | DCRO_PEGPL_460SX_OMR1MSKL_UOT
+ | DCRO_PEGPL_OMRxMSKL_VAL);
+ else if (of_device_is_compatible(
+ port->node, "ibm,plb-pciex-476fpe") ||
+ of_device_is_compatible(
+ port->node, "ibm,plb-pciex-476gtr"))
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
+ sa | DCRO_PEGPL_476FPE_OMR1MSKL_UOT
+ | DCRO_PEGPL_OMRxMSKL_VAL);
+ else
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
+ sa | DCRO_PEGPL_OMR1MSKL_UOT
+ | DCRO_PEGPL_OMRxMSKL_VAL);
+ break;
+ case 1:
+ out_le32(mbase + PECFG_POM1LAH, pciah);
+ out_le32(mbase + PECFG_POM1LAL, pcial);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAH, lah);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAL, lal);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKH, 0x7fffffff);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL,
+ sa | DCRO_PEGPL_OMRxMSKL_VAL);
+ break;
+ case 2:
+ out_le32(mbase + PECFG_POM2LAH, pciah);
+ out_le32(mbase + PECFG_POM2LAL, pcial);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAH, lah);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAL, lal);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKH, 0x7fffffff);
+ /* Note that 3 here means enabled | IO space !!! */
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL,
+ sa | DCRO_PEGPL_OMR3MSKL_IO
+ | DCRO_PEGPL_OMRxMSKL_VAL);
+ break;
+ }
+
+ return 0;
+}
+
+static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port,
+ struct pci_controller *hose,
+ void __iomem *mbase)
+{
+ int i, j, found_isa_hole = 0;
+
+ /* Setup outbound memory windows */
+ for (i = j = 0; i < 3; i++) {
+ struct resource *res = &hose->mem_resources[i];
+ resource_size_t offset = hose->mem_offset[i];
+
+ /* we only care about memory windows */
+ if (!(res->flags & IORESOURCE_MEM))
+ continue;
+ if (j > 1) {
+ printk(KERN_WARNING "%pOF: Too many ranges\n",
+ port->node);
+ break;
+ }
+
+ /* Configure the resource */
+ if (ppc4xx_setup_one_pciex_POM(port, hose, mbase,
+ res->start,
+ res->start - offset,
+ resource_size(res),
+ res->flags,
+ j) == 0) {
+ j++;
+
+ /* If the resource PCI address is 0 then we have our
+ * ISA memory hole
+ */
+ if (res->start == offset)
+ found_isa_hole = 1;
+ }
+ }
+
+ /* Handle ISA memory hole if not already covered */
+ if (j <= 1 && !found_isa_hole && hose->isa_mem_size)
+ if (ppc4xx_setup_one_pciex_POM(port, hose, mbase,
+ hose->isa_mem_phys, 0,
+ hose->isa_mem_size, 0, j) == 0)
+ printk(KERN_INFO "%pOF: Legacy ISA memory support enabled\n",
+ hose->dn);
+
+ /* Configure IO, always 64K starting at 0. We hard wire it to 64K !
+ * Note also that it -has- to be region index 2 on this HW
+ */
+ if (hose->io_resource.flags & IORESOURCE_IO)
+ ppc4xx_setup_one_pciex_POM(port, hose, mbase,
+ hose->io_base_phys, 0,
+ 0x10000, IORESOURCE_IO, 2);
+}
+
+static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
+ struct pci_controller *hose,
+ void __iomem *mbase,
+ struct resource *res)
+{
+ resource_size_t size = resource_size(res);
+ u64 sa;
+
+ if (port->endpoint) {
+ resource_size_t ep_addr = 0;
+ resource_size_t ep_size = 32 << 20;
+
+ /* Currently we map a fixed 64MByte window to PLB address
+ * 0 (SDRAM). This should probably be configurable via a dts
+ * property.
+ */
+
+ /* Calculate window size */
+ sa = (0xffffffffffffffffull << ilog2(ep_size));
+
+ /* Setup BAR0 */
+ out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
+ out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa) |
+ PCI_BASE_ADDRESS_MEM_TYPE_64);
+
+ /* Disable BAR1 & BAR2 */
+ out_le32(mbase + PECFG_BAR1MPA, 0);
+ out_le32(mbase + PECFG_BAR2HMPA, 0);
+ out_le32(mbase + PECFG_BAR2LMPA, 0);
+
+ out_le32(mbase + PECFG_PIM01SAH, RES_TO_U32_HIGH(sa));
+ out_le32(mbase + PECFG_PIM01SAL, RES_TO_U32_LOW(sa));
+
+ out_le32(mbase + PCI_BASE_ADDRESS_0, RES_TO_U32_LOW(ep_addr));
+ out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(ep_addr));
+ } else {
+ /* Calculate window size */
+ sa = (0xffffffffffffffffull << ilog2(size));
+ if (res->flags & IORESOURCE_PREFETCH)
+ sa |= PCI_BASE_ADDRESS_MEM_PREFETCH;
+
+ if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx") ||
+ of_device_is_compatible(
+ port->node, "ibm,plb-pciex-476fpe") ||
+ of_device_is_compatible(
+ port->node, "ibm,plb-pciex-476gtr"))
+ sa |= PCI_BASE_ADDRESS_MEM_TYPE_64;
+
+ out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
+ out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa));
+
+ /* The setup of the split looks weird to me ... let's see
+ * if it works
+ */
+ out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
+ out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
+ out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
+ out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
+
+ out_le32(mbase + PCI_BASE_ADDRESS_0, RES_TO_U32_LOW(res->start));
+ out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(res->start));
+ }
+
+ /* Enable inbound mapping */
+ out_le32(mbase + PECFG_PIMEN, 0x1);
+
+ /* Enable I/O, Mem, and Busmaster cycles */
+ out_le16(mbase + PCI_COMMAND,
+ in_le16(mbase + PCI_COMMAND) |
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+}
+
+static void __init ppc4xx_pciex_port_setup_hose(struct ppc4xx_pciex_port *port)
+{
+ struct resource dma_window;
+ struct pci_controller *hose = NULL;
+ const int *bus_range;
+ int primary, busses;
+ void __iomem *mbase = NULL, *cfg_data = NULL;
+ const u32 *pval;
+ u32 val;
+
+ /* Check if primary bridge */
+ primary = of_property_read_bool(port->node, "primary");
+
+ /* Get bus range if any */
+ bus_range = of_get_property(port->node, "bus-range", NULL);
+
+ /* Allocate the host controller data structure */
+ hose = pcibios_alloc_controller(port->node);
+ if (!hose)
+ goto fail;
+
+ /* We stick the port number in "indirect_type" so the config space
+ * ops can retrieve the port data structure easily
+ */
+ hose->indirect_type = port->index;
+
+ /* Get bus range */
+ hose->first_busno = bus_range ? bus_range[0] : 0x0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ /* Because of how big mapping the config space is (1M per bus), we
+ * limit how many busses we support. In the long run, we could replace
+ * that with something akin to kmap_atomic instead. We set aside 1 bus
+ * for the host itself too.
+ */
+ busses = hose->last_busno - hose->first_busno; /* This is off by 1 */
+ if (busses > MAX_PCIE_BUS_MAPPED) {
+ busses = MAX_PCIE_BUS_MAPPED;
+ hose->last_busno = hose->first_busno + busses;
+ }
+
+ if (!port->endpoint) {
+ /* Only map the external config space in cfg_data for
+ * PCIe root-complexes. External space is 1M per bus
+ */
+ cfg_data = ioremap(port->cfg_space.start +
+ (hose->first_busno + 1) * 0x100000,
+ busses * 0x100000);
+ if (cfg_data == NULL) {
+ printk(KERN_ERR "%pOF: Can't map external config space !",
+ port->node);
+ goto fail;
+ }
+ hose->cfg_data = cfg_data;
+ }
+
+ /* Always map the host config space in cfg_addr.
+ * Internal space is 4K
+ */
+ mbase = ioremap(port->cfg_space.start + 0x10000000, 0x1000);
+ if (mbase == NULL) {
+ printk(KERN_ERR "%pOF: Can't map internal config space !",
+ port->node);
+ goto fail;
+ }
+ hose->cfg_addr = mbase;
+
+ pr_debug("PCIE %pOF, bus %d..%d\n", port->node,
+ hose->first_busno, hose->last_busno);
+ pr_debug(" config space mapped at: root @0x%p, other @0x%p\n",
+ hose->cfg_addr, hose->cfg_data);
+
+ /* Setup config space */
+ hose->ops = &ppc4xx_pciex_pci_ops;
+ port->hose = hose;
+ mbase = (void __iomem *)hose->cfg_addr;
+
+ if (!port->endpoint) {
+ /*
+ * Set bus numbers on our root port
+ */
+ out_8(mbase + PCI_PRIMARY_BUS, hose->first_busno);
+ out_8(mbase + PCI_SECONDARY_BUS, hose->first_busno + 1);
+ out_8(mbase + PCI_SUBORDINATE_BUS, hose->last_busno);
+ }
+
+ /*
+ * OMRs are already reset, also disable PIMs
+ */
+ out_le32(mbase + PECFG_PIMEN, 0);
+
+ /* Parse outbound mapping resources */
+ pci_process_bridge_OF_ranges(hose, port->node, primary);
+
+ /* Parse inbound mapping resources */
+ if (ppc4xx_parse_dma_ranges(hose, mbase, &dma_window) != 0)
+ goto fail;
+
+ /* Configure outbound ranges POMs */
+ ppc4xx_configure_pciex_POMs(port, hose, mbase);
+
+ /* Configure inbound ranges PIMs */
+ ppc4xx_configure_pciex_PIMs(port, hose, mbase, &dma_window);
+
+ /* The root complex doesn't show up if we don't set some vendor
+ * and device IDs into it. The defaults below are the same bogus
+ * one that the initial code in arch/ppc had. This can be
+ * overwritten by setting the "vendor-id/device-id" properties
+ * in the pciex node.
+ */
+
+ /* Get the (optional) vendor-/device-id from the device-tree */
+ pval = of_get_property(port->node, "vendor-id", NULL);
+ if (pval) {
+ val = *pval;
+ } else {
+ if (!port->endpoint)
+ val = 0xaaa0 + port->index;
+ else
+ val = 0xeee0 + port->index;
+ }
+ out_le16(mbase + 0x200, val);
+
+ pval = of_get_property(port->node, "device-id", NULL);
+ if (pval) {
+ val = *pval;
+ } else {
+ if (!port->endpoint)
+ val = 0xbed0 + port->index;
+ else
+ val = 0xfed0 + port->index;
+ }
+ out_le16(mbase + 0x202, val);
+
+ /* Enable Bus master, memory, and io space */
+ if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+ out_le16(mbase + 0x204, 0x7);
+
+ if (!port->endpoint) {
+ /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
+ out_le32(mbase + 0x208, 0x06040001);
+
+ printk(KERN_INFO "PCIE%d: successfully set as root-complex\n",
+ port->index);
+ } else {
+ /* Set Class Code to Processor/PPC */
+ out_le32(mbase + 0x208, 0x0b200001);
+
+ printk(KERN_INFO "PCIE%d: successfully set as endpoint\n",
+ port->index);
+ }
+
+ return;
+ fail:
+ if (hose)
+ pcibios_free_controller(hose);
+ if (cfg_data)
+ iounmap(cfg_data);
+ if (mbase)
+ iounmap(mbase);
+}
+
+static void __init ppc4xx_probe_pciex_bridge(struct device_node *np)
+{
+ struct ppc4xx_pciex_port *port;
+ const u32 *pval;
+ int portno;
+ unsigned int dcrs;
+
+ /* First, proceed to core initialization as we assume there's
+ * only one PCIe core in the system
+ */
+ if (ppc4xx_pciex_check_core_init(np))
+ return;
+
+ /* Get the port number from the device-tree */
+ pval = of_get_property(np, "port", NULL);
+ if (pval == NULL) {
+ printk(KERN_ERR "PCIE: Can't find port number for %pOF\n", np);
+ return;
+ }
+ portno = *pval;
+ if (portno >= ppc4xx_pciex_port_count) {
+ printk(KERN_ERR "PCIE: port number out of range for %pOF\n",
+ np);
+ return;
+ }
+ port = &ppc4xx_pciex_ports[portno];
+ port->index = portno;
+
+ /*
+ * Check if device is enabled
+ */
+ if (!of_device_is_available(np)) {
+ printk(KERN_INFO "PCIE%d: Port disabled via device-tree\n", port->index);
+ return;
+ }
+
+ port->node = of_node_get(np);
+ if (ppc4xx_pciex_hwops->want_sdr) {
+ pval = of_get_property(np, "sdr-base", NULL);
+ if (pval == NULL) {
+ printk(KERN_ERR "PCIE: missing sdr-base for %pOF\n",
+ np);
+ return;
+ }
+ port->sdr_base = *pval;
+ }
+
+ /* Check if device_type property is set to "pci" or "pci-endpoint".
+ * Resulting from this setup this PCIe port will be configured
+ * as root-complex or as endpoint.
+ */
+ if (of_node_is_type(port->node, "pci-endpoint")) {
+ port->endpoint = 1;
+ } else if (of_node_is_type(port->node, "pci")) {
+ port->endpoint = 0;
+ } else {
+ printk(KERN_ERR "PCIE: missing or incorrect device_type for %pOF\n",
+ np);
+ return;
+ }
+
+ /* Fetch config space registers address */
+ if (of_address_to_resource(np, 0, &port->cfg_space)) {
+ printk(KERN_ERR "%pOF: Can't get PCI-E config space !", np);
+ return;
+ }
+ /* Fetch host bridge internal registers address */
+ if (of_address_to_resource(np, 1, &port->utl_regs)) {
+ printk(KERN_ERR "%pOF: Can't get UTL register base !", np);
+ return;
+ }
+
+ /* Map DCRs */
+ dcrs = dcr_resource_start(np, 0);
+ if (dcrs == 0) {
+ printk(KERN_ERR "%pOF: Can't get DCR register base !", np);
+ return;
+ }
+ port->dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0));
+
+ /* Initialize the port specific registers */
+ if (ppc4xx_pciex_port_init(port)) {
+ printk(KERN_WARNING "PCIE%d: Port init failed\n", port->index);
+ return;
+ }
+
+ /* Setup the linux hose data structure */
+ ppc4xx_pciex_port_setup_hose(port);
+}
+
+#endif /* CONFIG_PPC4xx_PCI_EXPRESS */
+
+static int __init ppc4xx_pci_find_bridges(void)
+{
+ struct device_node *np;
+
+ pci_add_flags(PCI_ENABLE_PROC_DOMAINS | PCI_COMPAT_DOMAIN_0);
+
+#ifdef CONFIG_PPC4xx_PCI_EXPRESS
+ for_each_compatible_node(np, NULL, "ibm,plb-pciex")
+ ppc4xx_probe_pciex_bridge(np);
+#endif
+ for_each_compatible_node(np, NULL, "ibm,plb-pcix")
+ ppc4xx_probe_pcix_bridge(np);
+ for_each_compatible_node(np, NULL, "ibm,plb-pci")
+ ppc4xx_probe_pci_bridge(np);
+
+ return 0;
+}
+arch_initcall(ppc4xx_pci_find_bridges);
+
diff --git a/arch/powerpc/platforms/4xx/pci.h b/arch/powerpc/platforms/4xx/pci.h
new file mode 100644
index 0000000000..bb4821938a
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/pci.h
@@ -0,0 +1,505 @@
+/*
+ * PCI / PCI-X / PCI-Express support for 4xx parts
+ *
+ * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ *
+ * Bits and pieces extracted from arch/ppc support by
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2002-2005 MontaVista Software Inc.
+ */
+#ifndef __PPC4XX_PCI_H__
+#define __PPC4XX_PCI_H__
+
+/*
+ * 4xx PCI-X bridge register definitions
+ */
+#define PCIX0_VENDID 0x000
+#define PCIX0_DEVID 0x002
+#define PCIX0_COMMAND 0x004
+#define PCIX0_STATUS 0x006
+#define PCIX0_REVID 0x008
+#define PCIX0_CLS 0x009
+#define PCIX0_CACHELS 0x00c
+#define PCIX0_LATTIM 0x00d
+#define PCIX0_HDTYPE 0x00e
+#define PCIX0_BIST 0x00f
+#define PCIX0_BAR0L 0x010
+#define PCIX0_BAR0H 0x014
+#define PCIX0_BAR1 0x018
+#define PCIX0_BAR2L 0x01c
+#define PCIX0_BAR2H 0x020
+#define PCIX0_BAR3 0x024
+#define PCIX0_CISPTR 0x028
+#define PCIX0_SBSYSVID 0x02c
+#define PCIX0_SBSYSID 0x02e
+#define PCIX0_EROMBA 0x030
+#define PCIX0_CAP 0x034
+#define PCIX0_RES0 0x035
+#define PCIX0_RES1 0x036
+#define PCIX0_RES2 0x038
+#define PCIX0_INTLN 0x03c
+#define PCIX0_INTPN 0x03d
+#define PCIX0_MINGNT 0x03e
+#define PCIX0_MAXLTNCY 0x03f
+#define PCIX0_BRDGOPT1 0x040
+#define PCIX0_BRDGOPT2 0x044
+#define PCIX0_ERREN 0x050
+#define PCIX0_ERRSTS 0x054
+#define PCIX0_PLBBESR 0x058
+#define PCIX0_PLBBEARL 0x05c
+#define PCIX0_PLBBEARH 0x060
+#define PCIX0_POM0LAL 0x068
+#define PCIX0_POM0LAH 0x06c
+#define PCIX0_POM0SA 0x070
+#define PCIX0_POM0PCIAL 0x074
+#define PCIX0_POM0PCIAH 0x078
+#define PCIX0_POM1LAL 0x07c
+#define PCIX0_POM1LAH 0x080
+#define PCIX0_POM1SA 0x084
+#define PCIX0_POM1PCIAL 0x088
+#define PCIX0_POM1PCIAH 0x08c
+#define PCIX0_POM2SA 0x090
+#define PCIX0_PIM0SAL 0x098
+#define PCIX0_PIM0SA PCIX0_PIM0SAL
+#define PCIX0_PIM0LAL 0x09c
+#define PCIX0_PIM0LAH 0x0a0
+#define PCIX0_PIM1SA 0x0a4
+#define PCIX0_PIM1LAL 0x0a8
+#define PCIX0_PIM1LAH 0x0ac
+#define PCIX0_PIM2SAL 0x0b0
+#define PCIX0_PIM2SA PCIX0_PIM2SAL
+#define PCIX0_PIM2LAL 0x0b4
+#define PCIX0_PIM2LAH 0x0b8
+#define PCIX0_OMCAPID 0x0c0
+#define PCIX0_OMNIPTR 0x0c1
+#define PCIX0_OMMC 0x0c2
+#define PCIX0_OMMA 0x0c4
+#define PCIX0_OMMUA 0x0c8
+#define PCIX0_OMMDATA 0x0cc
+#define PCIX0_OMMEOI 0x0ce
+#define PCIX0_PMCAPID 0x0d0
+#define PCIX0_PMNIPTR 0x0d1
+#define PCIX0_PMC 0x0d2
+#define PCIX0_PMCSR 0x0d4
+#define PCIX0_PMCSRBSE 0x0d6
+#define PCIX0_PMDATA 0x0d7
+#define PCIX0_PMSCRR 0x0d8
+#define PCIX0_CAPID 0x0dc
+#define PCIX0_NIPTR 0x0dd
+#define PCIX0_CMD 0x0de
+#define PCIX0_STS 0x0e0
+#define PCIX0_IDR 0x0e4
+#define PCIX0_CID 0x0e8
+#define PCIX0_RID 0x0ec
+#define PCIX0_PIM0SAH 0x0f8
+#define PCIX0_PIM2SAH 0x0fc
+#define PCIX0_MSGIL 0x100
+#define PCIX0_MSGIH 0x104
+#define PCIX0_MSGOL 0x108
+#define PCIX0_MSGOH 0x10c
+#define PCIX0_IM 0x1f8
+
+/*
+ * 4xx PCI bridge register definitions
+ */
+#define PCIL0_PMM0LA 0x00
+#define PCIL0_PMM0MA 0x04
+#define PCIL0_PMM0PCILA 0x08
+#define PCIL0_PMM0PCIHA 0x0c
+#define PCIL0_PMM1LA 0x10
+#define PCIL0_PMM1MA 0x14
+#define PCIL0_PMM1PCILA 0x18
+#define PCIL0_PMM1PCIHA 0x1c
+#define PCIL0_PMM2LA 0x20
+#define PCIL0_PMM2MA 0x24
+#define PCIL0_PMM2PCILA 0x28
+#define PCIL0_PMM2PCIHA 0x2c
+#define PCIL0_PTM1MS 0x30
+#define PCIL0_PTM1LA 0x34
+#define PCIL0_PTM2MS 0x38
+#define PCIL0_PTM2LA 0x3c
+
+/*
+ * 4xx PCIe bridge register definitions
+ */
+
+/* DCR offsets */
+#define DCRO_PEGPL_CFGBAH 0x00
+#define DCRO_PEGPL_CFGBAL 0x01
+#define DCRO_PEGPL_CFGMSK 0x02
+#define DCRO_PEGPL_MSGBAH 0x03
+#define DCRO_PEGPL_MSGBAL 0x04
+#define DCRO_PEGPL_MSGMSK 0x05
+#define DCRO_PEGPL_OMR1BAH 0x06
+#define DCRO_PEGPL_OMR1BAL 0x07
+#define DCRO_PEGPL_OMR1MSKH 0x08
+#define DCRO_PEGPL_OMR1MSKL 0x09
+#define DCRO_PEGPL_OMR2BAH 0x0a
+#define DCRO_PEGPL_OMR2BAL 0x0b
+#define DCRO_PEGPL_OMR2MSKH 0x0c
+#define DCRO_PEGPL_OMR2MSKL 0x0d
+#define DCRO_PEGPL_OMR3BAH 0x0e
+#define DCRO_PEGPL_OMR3BAL 0x0f
+#define DCRO_PEGPL_OMR3MSKH 0x10
+#define DCRO_PEGPL_OMR3MSKL 0x11
+#define DCRO_PEGPL_REGBAH 0x12
+#define DCRO_PEGPL_REGBAL 0x13
+#define DCRO_PEGPL_REGMSK 0x14
+#define DCRO_PEGPL_SPECIAL 0x15
+#define DCRO_PEGPL_CFG 0x16
+#define DCRO_PEGPL_ESR 0x17
+#define DCRO_PEGPL_EARH 0x18
+#define DCRO_PEGPL_EARL 0x19
+#define DCRO_PEGPL_EATR 0x1a
+
+/* DMER mask */
+#define GPL_DMER_MASK_DISA 0x02000000
+
+/*
+ * System DCRs (SDRs)
+ */
+#define PESDR0_PLLLCT1 0x03a0
+#define PESDR0_PLLLCT2 0x03a1
+#define PESDR0_PLLLCT3 0x03a2
+
+/*
+ * 440SPe additional DCRs
+ */
+#define PESDR0_440SPE_UTLSET1 0x0300
+#define PESDR0_440SPE_UTLSET2 0x0301
+#define PESDR0_440SPE_DLPSET 0x0302
+#define PESDR0_440SPE_LOOP 0x0303
+#define PESDR0_440SPE_RCSSET 0x0304
+#define PESDR0_440SPE_RCSSTS 0x0305
+#define PESDR0_440SPE_HSSL0SET1 0x0306
+#define PESDR0_440SPE_HSSL0SET2 0x0307
+#define PESDR0_440SPE_HSSL0STS 0x0308
+#define PESDR0_440SPE_HSSL1SET1 0x0309
+#define PESDR0_440SPE_HSSL1SET2 0x030a
+#define PESDR0_440SPE_HSSL1STS 0x030b
+#define PESDR0_440SPE_HSSL2SET1 0x030c
+#define PESDR0_440SPE_HSSL2SET2 0x030d
+#define PESDR0_440SPE_HSSL2STS 0x030e
+#define PESDR0_440SPE_HSSL3SET1 0x030f
+#define PESDR0_440SPE_HSSL3SET2 0x0310
+#define PESDR0_440SPE_HSSL3STS 0x0311
+#define PESDR0_440SPE_HSSL4SET1 0x0312
+#define PESDR0_440SPE_HSSL4SET2 0x0313
+#define PESDR0_440SPE_HSSL4STS 0x0314
+#define PESDR0_440SPE_HSSL5SET1 0x0315
+#define PESDR0_440SPE_HSSL5SET2 0x0316
+#define PESDR0_440SPE_HSSL5STS 0x0317
+#define PESDR0_440SPE_HSSL6SET1 0x0318
+#define PESDR0_440SPE_HSSL6SET2 0x0319
+#define PESDR0_440SPE_HSSL6STS 0x031a
+#define PESDR0_440SPE_HSSL7SET1 0x031b
+#define PESDR0_440SPE_HSSL7SET2 0x031c
+#define PESDR0_440SPE_HSSL7STS 0x031d
+#define PESDR0_440SPE_HSSCTLSET 0x031e
+#define PESDR0_440SPE_LANE_ABCD 0x031f
+#define PESDR0_440SPE_LANE_EFGH 0x0320
+
+#define PESDR1_440SPE_UTLSET1 0x0340
+#define PESDR1_440SPE_UTLSET2 0x0341
+#define PESDR1_440SPE_DLPSET 0x0342
+#define PESDR1_440SPE_LOOP 0x0343
+#define PESDR1_440SPE_RCSSET 0x0344
+#define PESDR1_440SPE_RCSSTS 0x0345
+#define PESDR1_440SPE_HSSL0SET1 0x0346
+#define PESDR1_440SPE_HSSL0SET2 0x0347
+#define PESDR1_440SPE_HSSL0STS 0x0348
+#define PESDR1_440SPE_HSSL1SET1 0x0349
+#define PESDR1_440SPE_HSSL1SET2 0x034a
+#define PESDR1_440SPE_HSSL1STS 0x034b
+#define PESDR1_440SPE_HSSL2SET1 0x034c
+#define PESDR1_440SPE_HSSL2SET2 0x034d
+#define PESDR1_440SPE_HSSL2STS 0x034e
+#define PESDR1_440SPE_HSSL3SET1 0x034f
+#define PESDR1_440SPE_HSSL3SET2 0x0350
+#define PESDR1_440SPE_HSSL3STS 0x0351
+#define PESDR1_440SPE_HSSCTLSET 0x0352
+#define PESDR1_440SPE_LANE_ABCD 0x0353
+
+#define PESDR2_440SPE_UTLSET1 0x0370
+#define PESDR2_440SPE_UTLSET2 0x0371
+#define PESDR2_440SPE_DLPSET 0x0372
+#define PESDR2_440SPE_LOOP 0x0373
+#define PESDR2_440SPE_RCSSET 0x0374
+#define PESDR2_440SPE_RCSSTS 0x0375
+#define PESDR2_440SPE_HSSL0SET1 0x0376
+#define PESDR2_440SPE_HSSL0SET2 0x0377
+#define PESDR2_440SPE_HSSL0STS 0x0378
+#define PESDR2_440SPE_HSSL1SET1 0x0379
+#define PESDR2_440SPE_HSSL1SET2 0x037a
+#define PESDR2_440SPE_HSSL1STS 0x037b
+#define PESDR2_440SPE_HSSL2SET1 0x037c
+#define PESDR2_440SPE_HSSL2SET2 0x037d
+#define PESDR2_440SPE_HSSL2STS 0x037e
+#define PESDR2_440SPE_HSSL3SET1 0x037f
+#define PESDR2_440SPE_HSSL3SET2 0x0380
+#define PESDR2_440SPE_HSSL3STS 0x0381
+#define PESDR2_440SPE_HSSCTLSET 0x0382
+#define PESDR2_440SPE_LANE_ABCD 0x0383
+
+/*
+ * 405EX additional DCRs
+ */
+#define PESDR0_405EX_UTLSET1 0x0400
+#define PESDR0_405EX_UTLSET2 0x0401
+#define PESDR0_405EX_DLPSET 0x0402
+#define PESDR0_405EX_LOOP 0x0403
+#define PESDR0_405EX_RCSSET 0x0404
+#define PESDR0_405EX_RCSSTS 0x0405
+#define PESDR0_405EX_PHYSET1 0x0406
+#define PESDR0_405EX_PHYSET2 0x0407
+#define PESDR0_405EX_BIST 0x0408
+#define PESDR0_405EX_LPB 0x040B
+#define PESDR0_405EX_PHYSTA 0x040C
+
+#define PESDR1_405EX_UTLSET1 0x0440
+#define PESDR1_405EX_UTLSET2 0x0441
+#define PESDR1_405EX_DLPSET 0x0442
+#define PESDR1_405EX_LOOP 0x0443
+#define PESDR1_405EX_RCSSET 0x0444
+#define PESDR1_405EX_RCSSTS 0x0445
+#define PESDR1_405EX_PHYSET1 0x0446
+#define PESDR1_405EX_PHYSET2 0x0447
+#define PESDR1_405EX_BIST 0x0448
+#define PESDR1_405EX_LPB 0x044B
+#define PESDR1_405EX_PHYSTA 0x044C
+
+/*
+ * 460EX additional DCRs
+ */
+#define PESDR0_460EX_L0BIST 0x0308
+#define PESDR0_460EX_L0BISTSTS 0x0309
+#define PESDR0_460EX_L0CDRCTL 0x030A
+#define PESDR0_460EX_L0DRV 0x030B
+#define PESDR0_460EX_L0REC 0x030C
+#define PESDR0_460EX_L0LPB 0x030D
+#define PESDR0_460EX_L0CLK 0x030E
+#define PESDR0_460EX_PHY_CTL_RST 0x030F
+#define PESDR0_460EX_RSTSTA 0x0310
+#define PESDR0_460EX_OBS 0x0311
+#define PESDR0_460EX_L0ERRC 0x0320
+
+#define PESDR1_460EX_L0BIST 0x0348
+#define PESDR1_460EX_L1BIST 0x0349
+#define PESDR1_460EX_L2BIST 0x034A
+#define PESDR1_460EX_L3BIST 0x034B
+#define PESDR1_460EX_L0BISTSTS 0x034C
+#define PESDR1_460EX_L1BISTSTS 0x034D
+#define PESDR1_460EX_L2BISTSTS 0x034E
+#define PESDR1_460EX_L3BISTSTS 0x034F
+#define PESDR1_460EX_L0CDRCTL 0x0350
+#define PESDR1_460EX_L1CDRCTL 0x0351
+#define PESDR1_460EX_L2CDRCTL 0x0352
+#define PESDR1_460EX_L3CDRCTL 0x0353
+#define PESDR1_460EX_L0DRV 0x0354
+#define PESDR1_460EX_L1DRV 0x0355
+#define PESDR1_460EX_L2DRV 0x0356
+#define PESDR1_460EX_L3DRV 0x0357
+#define PESDR1_460EX_L0REC 0x0358
+#define PESDR1_460EX_L1REC 0x0359
+#define PESDR1_460EX_L2REC 0x035A
+#define PESDR1_460EX_L3REC 0x035B
+#define PESDR1_460EX_L0LPB 0x035C
+#define PESDR1_460EX_L1LPB 0x035D
+#define PESDR1_460EX_L2LPB 0x035E
+#define PESDR1_460EX_L3LPB 0x035F
+#define PESDR1_460EX_L0CLK 0x0360
+#define PESDR1_460EX_L1CLK 0x0361
+#define PESDR1_460EX_L2CLK 0x0362
+#define PESDR1_460EX_L3CLK 0x0363
+#define PESDR1_460EX_PHY_CTL_RST 0x0364
+#define PESDR1_460EX_RSTSTA 0x0365
+#define PESDR1_460EX_OBS 0x0366
+#define PESDR1_460EX_L0ERRC 0x0368
+#define PESDR1_460EX_L1ERRC 0x0369
+#define PESDR1_460EX_L2ERRC 0x036A
+#define PESDR1_460EX_L3ERRC 0x036B
+#define PESDR0_460EX_IHS1 0x036C
+#define PESDR0_460EX_IHS2 0x036D
+
+/*
+ * 460SX additional DCRs
+ */
+#define PESDRn_460SX_RCEI 0x02
+
+#define PESDR0_460SX_HSSL0DAMP 0x320
+#define PESDR0_460SX_HSSL1DAMP 0x321
+#define PESDR0_460SX_HSSL2DAMP 0x322
+#define PESDR0_460SX_HSSL3DAMP 0x323
+#define PESDR0_460SX_HSSL4DAMP 0x324
+#define PESDR0_460SX_HSSL5DAMP 0x325
+#define PESDR0_460SX_HSSL6DAMP 0x326
+#define PESDR0_460SX_HSSL7DAMP 0x327
+
+#define PESDR1_460SX_HSSL0DAMP 0x354
+#define PESDR1_460SX_HSSL1DAMP 0x355
+#define PESDR1_460SX_HSSL2DAMP 0x356
+#define PESDR1_460SX_HSSL3DAMP 0x357
+
+#define PESDR2_460SX_HSSL0DAMP 0x384
+#define PESDR2_460SX_HSSL1DAMP 0x385
+#define PESDR2_460SX_HSSL2DAMP 0x386
+#define PESDR2_460SX_HSSL3DAMP 0x387
+
+#define PESDR0_460SX_HSSL0COEFA 0x328
+#define PESDR0_460SX_HSSL1COEFA 0x329
+#define PESDR0_460SX_HSSL2COEFA 0x32A
+#define PESDR0_460SX_HSSL3COEFA 0x32B
+#define PESDR0_460SX_HSSL4COEFA 0x32C
+#define PESDR0_460SX_HSSL5COEFA 0x32D
+#define PESDR0_460SX_HSSL6COEFA 0x32E
+#define PESDR0_460SX_HSSL7COEFA 0x32F
+
+#define PESDR1_460SX_HSSL0COEFA 0x358
+#define PESDR1_460SX_HSSL1COEFA 0x359
+#define PESDR1_460SX_HSSL2COEFA 0x35A
+#define PESDR1_460SX_HSSL3COEFA 0x35B
+
+#define PESDR2_460SX_HSSL0COEFA 0x388
+#define PESDR2_460SX_HSSL1COEFA 0x389
+#define PESDR2_460SX_HSSL2COEFA 0x38A
+#define PESDR2_460SX_HSSL3COEFA 0x38B
+
+#define PESDR0_460SX_HSSL1CALDRV 0x339
+#define PESDR1_460SX_HSSL1CALDRV 0x361
+#define PESDR2_460SX_HSSL1CALDRV 0x391
+
+#define PESDR0_460SX_HSSSLEW 0x338
+#define PESDR1_460SX_HSSSLEW 0x360
+#define PESDR2_460SX_HSSSLEW 0x390
+
+#define PESDR0_460SX_HSSCTLSET 0x31E
+#define PESDR1_460SX_HSSCTLSET 0x352
+#define PESDR2_460SX_HSSCTLSET 0x382
+
+#define PESDR0_460SX_RCSSET 0x304
+#define PESDR1_460SX_RCSSET 0x344
+#define PESDR2_460SX_RCSSET 0x374
+/*
+ * Of the above, some are common offsets from the base
+ */
+#define PESDRn_UTLSET1 0x00
+#define PESDRn_UTLSET2 0x01
+#define PESDRn_DLPSET 0x02
+#define PESDRn_LOOP 0x03
+#define PESDRn_RCSSET 0x04
+#define PESDRn_RCSSTS 0x05
+
+/* 440spe only */
+#define PESDRn_440SPE_HSSL0SET1 0x06
+#define PESDRn_440SPE_HSSL0SET2 0x07
+#define PESDRn_440SPE_HSSL0STS 0x08
+#define PESDRn_440SPE_HSSL1SET1 0x09
+#define PESDRn_440SPE_HSSL1SET2 0x0a
+#define PESDRn_440SPE_HSSL1STS 0x0b
+#define PESDRn_440SPE_HSSL2SET1 0x0c
+#define PESDRn_440SPE_HSSL2SET2 0x0d
+#define PESDRn_440SPE_HSSL2STS 0x0e
+#define PESDRn_440SPE_HSSL3SET1 0x0f
+#define PESDRn_440SPE_HSSL3SET2 0x10
+#define PESDRn_440SPE_HSSL3STS 0x11
+
+/* 440spe port 0 only */
+#define PESDRn_440SPE_HSSL4SET1 0x12
+#define PESDRn_440SPE_HSSL4SET2 0x13
+#define PESDRn_440SPE_HSSL4STS 0x14
+#define PESDRn_440SPE_HSSL5SET1 0x15
+#define PESDRn_440SPE_HSSL5SET2 0x16
+#define PESDRn_440SPE_HSSL5STS 0x17
+#define PESDRn_440SPE_HSSL6SET1 0x18
+#define PESDRn_440SPE_HSSL6SET2 0x19
+#define PESDRn_440SPE_HSSL6STS 0x1a
+#define PESDRn_440SPE_HSSL7SET1 0x1b
+#define PESDRn_440SPE_HSSL7SET2 0x1c
+#define PESDRn_440SPE_HSSL7STS 0x1d
+
+/* 405ex only */
+#define PESDRn_405EX_PHYSET1 0x06
+#define PESDRn_405EX_PHYSET2 0x07
+#define PESDRn_405EX_PHYSTA 0x0c
+
+/*
+ * UTL register offsets
+ */
+#define PEUTL_PBCTL 0x00
+#define PEUTL_PBBSZ 0x20
+#define PEUTL_OPDBSZ 0x68
+#define PEUTL_IPHBSZ 0x70
+#define PEUTL_IPDBSZ 0x78
+#define PEUTL_OUTTR 0x90
+#define PEUTL_INTR 0x98
+#define PEUTL_PCTL 0xa0
+#define PEUTL_RCSTA 0xB0
+#define PEUTL_RCIRQEN 0xb8
+
+/*
+ * Config space register offsets
+ */
+#define PECFG_ECRTCTL 0x074
+
+#define PECFG_BAR0LMPA 0x210
+#define PECFG_BAR0HMPA 0x214
+#define PECFG_BAR1MPA 0x218
+#define PECFG_BAR2LMPA 0x220
+#define PECFG_BAR2HMPA 0x224
+
+#define PECFG_PIMEN 0x33c
+#define PECFG_PIM0LAL 0x340
+#define PECFG_PIM0LAH 0x344
+#define PECFG_PIM1LAL 0x348
+#define PECFG_PIM1LAH 0x34c
+#define PECFG_PIM01SAL 0x350
+#define PECFG_PIM01SAH 0x354
+
+#define PECFG_POM0LAL 0x380
+#define PECFG_POM0LAH 0x384
+#define PECFG_POM1LAL 0x388
+#define PECFG_POM1LAH 0x38c
+#define PECFG_POM2LAL 0x390
+#define PECFG_POM2LAH 0x394
+
+/* 460sx only */
+#define PECFG_460SX_DLLSTA 0x3f8
+
+/* 460sx Bit Mappings */
+#define PECFG_460SX_DLLSTA_LINKUP 0x00000010
+#define DCRO_PEGPL_460SX_OMR1MSKL_UOT 0x00000004
+
+/* PEGPL Bit Mappings */
+#define DCRO_PEGPL_OMRxMSKL_VAL 0x00000001
+#define DCRO_PEGPL_OMR1MSKL_UOT 0x00000002
+#define DCRO_PEGPL_OMR3MSKL_IO 0x00000002
+
+/* 476FPE */
+#define PCCFG_LCPA 0x270
+#define PECFG_TLDLP 0x3F8
+#define PECFG_TLDLP_LNKUP 0x00000008
+#define PECFG_TLDLP_PRESENT 0x00000010
+#define DCRO_PEGPL_476FPE_OMR1MSKL_UOT 0x00000004
+
+/* SDR Bit Mappings */
+#define PESDRx_RCSSET_HLDPLB 0x10000000
+#define PESDRx_RCSSET_RSTGU 0x01000000
+#define PESDRx_RCSSET_RDY 0x00100000
+#define PESDRx_RCSSET_RSTDL 0x00010000
+#define PESDRx_RCSSET_RSTPYN 0x00001000
+
+enum
+{
+ PTYPE_ENDPOINT = 0x0,
+ PTYPE_LEGACY_ENDPOINT = 0x1,
+ PTYPE_ROOT_PORT = 0x4,
+
+ LNKW_X1 = 0x1,
+ LNKW_X4 = 0x4,
+ LNKW_X8 = 0x8
+};
+
+
+#endif /* __PPC4XX_PCI_H__ */
diff --git a/arch/powerpc/platforms/4xx/soc.c b/arch/powerpc/platforms/4xx/soc.c
new file mode 100644
index 0000000000..b2d940437a
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/soc.c
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * IBM/AMCC PPC4xx SoC setup code
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * L2 cache routines cloned from arch/ppc/syslib/ibm440gx_common.c which is:
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003 - 2006 Zultys Technologies
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+#include <asm/reg.h>
+#include <asm/ppc4xx.h>
+
+static u32 dcrbase_l2c;
+
+/*
+ * L2-cache
+ */
+
+/* Issue L2C diagnostic command */
+static inline u32 l2c_diag(u32 addr)
+{
+ mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, addr);
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_DIAG);
+ while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
+ ;
+
+ return mfdcr(dcrbase_l2c + DCRN_L2C0_DATA);
+}
+
+static irqreturn_t l2c_error_handler(int irq, void *dev)
+{
+ u32 sr = mfdcr(dcrbase_l2c + DCRN_L2C0_SR);
+
+ if (sr & L2C_SR_CPE) {
+ /* Read cache trapped address */
+ u32 addr = l2c_diag(0x42000000);
+ printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n",
+ addr);
+ }
+ if (sr & L2C_SR_TPE) {
+ /* Read tag trapped address */
+ u32 addr = l2c_diag(0x82000000) >> 16;
+ printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n",
+ addr);
+ }
+
+ /* Clear parity errors */
+ if (sr & (L2C_SR_CPE | L2C_SR_TPE)){
+ mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
+ } else {
+ printk(KERN_EMERG "L2C: LRU error\n");
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int __init ppc4xx_l2c_probe(void)
+{
+ struct device_node *np;
+ u32 r;
+ unsigned long flags;
+ int irq;
+ const u32 *dcrreg;
+ u32 dcrbase_isram;
+ int len;
+ const u32 *prop;
+ u32 l2_size;
+
+ np = of_find_compatible_node(NULL, NULL, "ibm,l2-cache");
+ if (!np)
+ return 0;
+
+ /* Get l2 cache size */
+ prop = of_get_property(np, "cache-size", NULL);
+ if (prop == NULL) {
+ printk(KERN_ERR "%pOF: Can't get cache-size!\n", np);
+ of_node_put(np);
+ return -ENODEV;
+ }
+ l2_size = prop[0];
+
+ /* Map DCRs */
+ dcrreg = of_get_property(np, "dcr-reg", &len);
+ if (!dcrreg || (len != 4 * sizeof(u32))) {
+ printk(KERN_ERR "%pOF: Can't get DCR register base !", np);
+ of_node_put(np);
+ return -ENODEV;
+ }
+ dcrbase_isram = dcrreg[0];
+ dcrbase_l2c = dcrreg[2];
+
+ /* Get and map irq number from device tree */
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq) {
+ printk(KERN_ERR "irq_of_parse_and_map failed\n");
+ of_node_put(np);
+ return -ENODEV;
+ }
+
+ /* Install error handler */
+ if (request_irq(irq, l2c_error_handler, 0, "L2C", 0) < 0) {
+ printk(KERN_ERR "Cannot install L2C error handler"
+ ", cache is not enabled\n");
+ of_node_put(np);
+ return -ENODEV;
+ }
+
+ local_irq_save(flags);
+ asm volatile ("sync" ::: "memory");
+
+ /* Disable SRAM */
+ mtdcr(dcrbase_isram + DCRN_SRAM0_DPC,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_DPC) & ~SRAM_DPC_ENABLE);
+ mtdcr(dcrbase_isram + DCRN_SRAM0_SB0CR,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK);
+ mtdcr(dcrbase_isram + DCRN_SRAM0_SB1CR,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK);
+ mtdcr(dcrbase_isram + DCRN_SRAM0_SB2CR,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK);
+ mtdcr(dcrbase_isram + DCRN_SRAM0_SB3CR,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK);
+
+ /* Enable L2_MODE without ICU/DCU */
+ r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG) &
+ ~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK);
+ r |= L2C_CFG_L2M | L2C_CFG_SS_256;
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
+
+ mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
+
+ /* Hardware Clear Command */
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_HCC);
+ while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
+ ;
+
+ /* Clear Cache Parity and Tag Errors */
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
+
+ /* Enable 64G snoop region starting at 0 */
+ r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP0) &
+ ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
+ r |= L2C_SNP_SSR_32G | L2C_SNP_ESR;
+ mtdcr(dcrbase_l2c + DCRN_L2C0_SNP0, r);
+
+ r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP1) &
+ ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
+ r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR;
+ mtdcr(dcrbase_l2c + DCRN_L2C0_SNP1, r);
+
+ asm volatile ("sync" ::: "memory");
+
+ /* Enable ICU/DCU ports */
+ r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG);
+ r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM
+ | L2C_CFG_TPEI | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM);
+ r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN
+ | L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM;
+
+ /* Check for 460EX/GT special handling */
+ if (of_device_is_compatible(np, "ibm,l2-cache-460ex") ||
+ of_device_is_compatible(np, "ibm,l2-cache-460gt"))
+ r |= L2C_CFG_RDBW;
+
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
+
+ asm volatile ("sync; isync" ::: "memory");
+ local_irq_restore(flags);
+
+ printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10);
+
+ of_node_put(np);
+ return 0;
+}
+arch_initcall(ppc4xx_l2c_probe);
+
+/*
+ * Apply a system reset. Alternatively a board specific value may be
+ * provided via the "reset-type" property in the cpu node.
+ */
+void ppc4xx_reset_system(char *cmd)
+{
+ struct device_node *np;
+ u32 reset_type = DBCR0_RST_SYSTEM;
+ const u32 *prop;
+
+ np = of_get_cpu_node(0, NULL);
+ if (np) {
+ prop = of_get_property(np, "reset-type", NULL);
+
+ /*
+ * Check if property exists and if it is in range:
+ * 1 - PPC4xx core reset
+ * 2 - PPC4xx chip reset
+ * 3 - PPC4xx system reset (default)
+ */
+ if ((prop) && ((prop[0] >= 1) && (prop[0] <= 3)))
+ reset_type = prop[0] << 28;
+ }
+
+ mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | reset_type);
+
+ while (1)
+ ; /* Just in case the reset doesn't work */
+}
diff --git a/arch/powerpc/platforms/4xx/uic.c b/arch/powerpc/platforms/4xx/uic.c
new file mode 100644
index 0000000000..e3e148b9dd
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/uic.c
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/powerpc/sysdev/uic.c
+ *
+ * IBM PowerPC 4xx Universal Interrupt Controller
+ *
+ * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/dcr.h>
+#include <asm/uic.h>
+
+#define NR_UIC_INTS 32
+
+#define UIC_SR 0x0
+#define UIC_ER 0x2
+#define UIC_CR 0x3
+#define UIC_PR 0x4
+#define UIC_TR 0x5
+#define UIC_MSR 0x6
+#define UIC_VR 0x7
+#define UIC_VCR 0x8
+
+struct uic *primary_uic;
+
+struct uic {
+ int index;
+ int dcrbase;
+
+ raw_spinlock_t lock;
+
+ /* The remapper for this UIC */
+ struct irq_domain *irqhost;
+};
+
+static void uic_unmask_irq(struct irq_data *d)
+{
+ struct uic *uic = irq_data_get_irq_chip_data(d);
+ unsigned int src = irqd_to_hwirq(d);
+ unsigned long flags;
+ u32 er, sr;
+
+ sr = 1 << (31-src);
+ raw_spin_lock_irqsave(&uic->lock, flags);
+ /* ack level-triggered interrupts here */
+ if (irqd_is_level_type(d))
+ mtdcr(uic->dcrbase + UIC_SR, sr);
+ er = mfdcr(uic->dcrbase + UIC_ER);
+ er |= sr;
+ mtdcr(uic->dcrbase + UIC_ER, er);
+ raw_spin_unlock_irqrestore(&uic->lock, flags);
+}
+
+static void uic_mask_irq(struct irq_data *d)
+{
+ struct uic *uic = irq_data_get_irq_chip_data(d);
+ unsigned int src = irqd_to_hwirq(d);
+ unsigned long flags;
+ u32 er;
+
+ raw_spin_lock_irqsave(&uic->lock, flags);
+ er = mfdcr(uic->dcrbase + UIC_ER);
+ er &= ~(1 << (31 - src));
+ mtdcr(uic->dcrbase + UIC_ER, er);
+ raw_spin_unlock_irqrestore(&uic->lock, flags);
+}
+
+static void uic_ack_irq(struct irq_data *d)
+{
+ struct uic *uic = irq_data_get_irq_chip_data(d);
+ unsigned int src = irqd_to_hwirq(d);
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&uic->lock, flags);
+ mtdcr(uic->dcrbase + UIC_SR, 1 << (31-src));
+ raw_spin_unlock_irqrestore(&uic->lock, flags);
+}
+
+static void uic_mask_ack_irq(struct irq_data *d)
+{
+ struct uic *uic = irq_data_get_irq_chip_data(d);
+ unsigned int src = irqd_to_hwirq(d);
+ unsigned long flags;
+ u32 er, sr;
+
+ sr = 1 << (31-src);
+ raw_spin_lock_irqsave(&uic->lock, flags);
+ er = mfdcr(uic->dcrbase + UIC_ER);
+ er &= ~sr;
+ mtdcr(uic->dcrbase + UIC_ER, er);
+ /* On the UIC, acking (i.e. clearing the SR bit)
+ * a level irq will have no effect if the interrupt
+ * is still asserted by the device, even if
+ * the interrupt is already masked. Therefore
+ * we only ack the egde interrupts here, while
+ * level interrupts are ack'ed after the actual
+ * isr call in the uic_unmask_irq()
+ */
+ if (!irqd_is_level_type(d))
+ mtdcr(uic->dcrbase + UIC_SR, sr);
+ raw_spin_unlock_irqrestore(&uic->lock, flags);
+}
+
+static int uic_set_irq_type(struct irq_data *d, unsigned int flow_type)
+{
+ struct uic *uic = irq_data_get_irq_chip_data(d);
+ unsigned int src = irqd_to_hwirq(d);
+ unsigned long flags;
+ int trigger, polarity;
+ u32 tr, pr, mask;
+
+ switch (flow_type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_NONE:
+ uic_mask_irq(d);
+ return 0;
+
+ case IRQ_TYPE_EDGE_RISING:
+ trigger = 1; polarity = 1;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ trigger = 1; polarity = 0;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ trigger = 0; polarity = 1;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ trigger = 0; polarity = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mask = ~(1 << (31 - src));
+
+ raw_spin_lock_irqsave(&uic->lock, flags);
+ tr = mfdcr(uic->dcrbase + UIC_TR);
+ pr = mfdcr(uic->dcrbase + UIC_PR);
+ tr = (tr & mask) | (trigger << (31-src));
+ pr = (pr & mask) | (polarity << (31-src));
+
+ mtdcr(uic->dcrbase + UIC_PR, pr);
+ mtdcr(uic->dcrbase + UIC_TR, tr);
+ mtdcr(uic->dcrbase + UIC_SR, ~mask);
+
+ raw_spin_unlock_irqrestore(&uic->lock, flags);
+
+ return 0;
+}
+
+static struct irq_chip uic_irq_chip = {
+ .name = "UIC",
+ .irq_unmask = uic_unmask_irq,
+ .irq_mask = uic_mask_irq,
+ .irq_mask_ack = uic_mask_ack_irq,
+ .irq_ack = uic_ack_irq,
+ .irq_set_type = uic_set_irq_type,
+};
+
+static int uic_host_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct uic *uic = h->host_data;
+
+ irq_set_chip_data(virq, uic);
+ /* Despite the name, handle_level_irq() works for both level
+ * and edge irqs on UIC. FIXME: check this is correct */
+ irq_set_chip_and_handler(virq, &uic_irq_chip, handle_level_irq);
+
+ /* Set default irq type */
+ irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+ return 0;
+}
+
+static const struct irq_domain_ops uic_host_ops = {
+ .map = uic_host_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static void uic_irq_cascade(struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct irq_data *idata = irq_desc_get_irq_data(desc);
+ struct uic *uic = irq_desc_get_handler_data(desc);
+ u32 msr;
+ int src;
+
+ raw_spin_lock(&desc->lock);
+ if (irqd_is_level_type(idata))
+ chip->irq_mask(idata);
+ else
+ chip->irq_mask_ack(idata);
+ raw_spin_unlock(&desc->lock);
+
+ msr = mfdcr(uic->dcrbase + UIC_MSR);
+ if (!msr) /* spurious interrupt */
+ goto uic_irq_ret;
+
+ src = 32 - ffs(msr);
+
+ generic_handle_domain_irq(uic->irqhost, src);
+
+uic_irq_ret:
+ raw_spin_lock(&desc->lock);
+ if (irqd_is_level_type(idata))
+ chip->irq_ack(idata);
+ if (!irqd_irq_disabled(idata) && chip->irq_unmask)
+ chip->irq_unmask(idata);
+ raw_spin_unlock(&desc->lock);
+}
+
+static struct uic * __init uic_init_one(struct device_node *node)
+{
+ struct uic *uic;
+ const u32 *indexp, *dcrreg;
+ int len;
+
+ BUG_ON(! of_device_is_compatible(node, "ibm,uic"));
+
+ uic = kzalloc(sizeof(*uic), GFP_KERNEL);
+ if (! uic)
+ return NULL; /* FIXME: panic? */
+
+ raw_spin_lock_init(&uic->lock);
+ indexp = of_get_property(node, "cell-index", &len);
+ if (!indexp || (len != sizeof(u32))) {
+ printk(KERN_ERR "uic: Device node %pOF has missing or invalid "
+ "cell-index property\n", node);
+ return NULL;
+ }
+ uic->index = *indexp;
+
+ dcrreg = of_get_property(node, "dcr-reg", &len);
+ if (!dcrreg || (len != 2*sizeof(u32))) {
+ printk(KERN_ERR "uic: Device node %pOF has missing or invalid "
+ "dcr-reg property\n", node);
+ return NULL;
+ }
+ uic->dcrbase = *dcrreg;
+
+ uic->irqhost = irq_domain_add_linear(node, NR_UIC_INTS, &uic_host_ops,
+ uic);
+ if (! uic->irqhost)
+ return NULL; /* FIXME: panic? */
+
+ /* Start with all interrupts disabled, level and non-critical */
+ mtdcr(uic->dcrbase + UIC_ER, 0);
+ mtdcr(uic->dcrbase + UIC_CR, 0);
+ mtdcr(uic->dcrbase + UIC_TR, 0);
+ /* Clear any pending interrupts, in case the firmware left some */
+ mtdcr(uic->dcrbase + UIC_SR, 0xffffffff);
+
+ printk ("UIC%d (%d IRQ sources) at DCR 0x%x\n", uic->index,
+ NR_UIC_INTS, uic->dcrbase);
+
+ return uic;
+}
+
+void __init uic_init_tree(void)
+{
+ struct device_node *np;
+ struct uic *uic;
+ const u32 *interrupts;
+
+ /* First locate and initialize the top-level UIC */
+ for_each_compatible_node(np, NULL, "ibm,uic") {
+ interrupts = of_get_property(np, "interrupts", NULL);
+ if (!interrupts)
+ break;
+ }
+
+ BUG_ON(!np); /* uic_init_tree() assumes there's a UIC as the
+ * top-level interrupt controller */
+ primary_uic = uic_init_one(np);
+ if (!primary_uic)
+ panic("Unable to initialize primary UIC %pOF\n", np);
+
+ irq_set_default_host(primary_uic->irqhost);
+ of_node_put(np);
+
+ /* The scan again for cascaded UICs */
+ for_each_compatible_node(np, NULL, "ibm,uic") {
+ interrupts = of_get_property(np, "interrupts", NULL);
+ if (interrupts) {
+ /* Secondary UIC */
+ int cascade_virq;
+
+ uic = uic_init_one(np);
+ if (! uic)
+ panic("Unable to initialize a secondary UIC %pOF\n",
+ np);
+
+ cascade_virq = irq_of_parse_and_map(np, 0);
+
+ irq_set_handler_data(cascade_virq, uic);
+ irq_set_chained_handler(cascade_virq, uic_irq_cascade);
+
+ /* FIXME: setup critical cascade?? */
+ }
+ }
+}
+
+/* Return an interrupt vector or 0 if no interrupt is pending. */
+unsigned int uic_get_irq(void)
+{
+ u32 msr;
+ int src;
+
+ BUG_ON(! primary_uic);
+
+ msr = mfdcr(primary_uic->dcrbase + UIC_MSR);
+ src = 32 - ffs(msr);
+
+ return irq_linear_revmap(primary_uic->irqhost, src);
+}