diff options
Diffstat (limited to 'arch/riscv/boot/dts/starfive')
-rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi | 99 |
1 files changed, 0 insertions, 99 deletions
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index 45b58b6f3d..ccd0ce55aa 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -238,7 +238,6 @@ axp15060: pmic@36 { compatible = "x-powers,axp15060"; reg = <0x36>; - interrupts = <0>; interrupt-controller; #interrupt-cells = <1>; @@ -279,24 +278,6 @@ status = "okay"; }; -&i2srx { - pinctrl-names = "default"; - pinctrl-0 = <&i2srx_pins>; - status = "okay"; -}; - -&i2stx0 { - pinctrl-names = "default"; - pinctrl-0 = <&mclk_ext_pins>; - status = "okay"; -}; - -&i2stx1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2stx1_pins>; - status = "okay"; -}; - &mmc0 { max-frequency = <100000000>; assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; @@ -447,46 +428,6 @@ }; }; - i2srx_pins: i2srx-0 { - clk-sd-pins { - pinmux = <GPIOMUX(38, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2SRX_BCLK)>, - <GPIOMUX(63, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2SRX_LRCK)>, - <GPIOMUX(38, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2STX1_BCLK)>, - <GPIOMUX(63, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2STX1_LRCK)>, - <GPIOMUX(61, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2SRX_SDIN0)>; - input-enable; - }; - }; - - i2stx1_pins: i2stx1-0 { - sd-pins { - pinmux = <GPIOMUX(44, GPOUT_SYS_I2STX1_SDO0, - GPOEN_ENABLE, - GPI_NONE)>; - bias-disable; - input-disable; - }; - }; - - mclk_ext_pins: mclk-ext-0 { - mclk-ext-pins { - pinmux = <GPIOMUX(4, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_MCLK_EXT)>; - input-enable; - }; - }; - mmc0_pins: mmc0-0 { rst-pins { pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST, @@ -622,40 +563,6 @@ }; }; - tdm_pins: tdm-0 { - tx-pins { - pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD, - GPOEN_ENABLE, - GPI_NONE)>; - bias-pull-up; - drive-strength = <2>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - rx-pins { - pinmux = <GPIOMUX(61, GPOUT_HIGH, - GPOEN_DISABLE, - GPI_SYS_TDM_RXD)>; - input-enable; - }; - - sync-pins { - pinmux = <GPIOMUX(63, GPOUT_HIGH, - GPOEN_DISABLE, - GPI_SYS_TDM_SYNC)>; - input-enable; - }; - - pcmclk-pins { - pinmux = <GPIOMUX(38, GPOUT_HIGH, - GPOEN_DISABLE, - GPI_SYS_TDM_CLK)>; - input-enable; - }; - }; - uart0_pins: uart0-0 { tx-pins { pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, @@ -681,12 +588,6 @@ }; }; -&tdm { - pinctrl-names = "default"; - pinctrl-0 = <&tdm_pins>; - status = "okay"; -}; - &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins>; |