summaryrefslogtreecommitdiffstats
path: root/arch/riscv/boot/dts/starfive
diff options
context:
space:
mode:
Diffstat (limited to 'arch/riscv/boot/dts/starfive')
-rw-r--r--arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts11
-rw-r--r--arch/riscv/boot/dts/starfive/jh7100-common.dtsi108
-rw-r--r--arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts22
-rw-r--r--arch/riscv/boot/dts/starfive/jh7100.dtsi45
-rw-r--r--arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi170
-rw-r--r--arch/riscv/boot/dts/starfive/jh7110.dtsi76
6 files changed, 332 insertions, 100 deletions
diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
index 7cda3a8902..168f5d9895 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
+++ b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
@@ -11,3 +11,14 @@
model = "BeagleV Starlight Beta";
compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
};
+
+&gmac {
+ phy-handle = <&phy>;
+};
+
+&mdio {
+ phy: ethernet-phy@7 {
+ reg = <7>;
+ reset-gpios = <&gpio 63 GPIO_ACTIVE_LOW>;
+ };
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
index 42fb61c360..ae1a6aeb0a 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
@@ -72,7 +72,91 @@
};
};
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ };
+};
+
&gpio {
+ gmac_pins: gmac-0 {
+ gtxclk-pins {
+ pins = <PAD_FUNC_SHARE(115)>;
+ bias-pull-up;
+ drive-strength = <35>;
+ input-enable;
+ input-schmitt-enable;
+ slew-rate = <0>;
+ };
+ miitxclk-pins {
+ pins = <PAD_FUNC_SHARE(116)>;
+ bias-pull-up;
+ drive-strength = <14>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ tx-pins {
+ pins = <PAD_FUNC_SHARE(117)>,
+ <PAD_FUNC_SHARE(119)>,
+ <PAD_FUNC_SHARE(120)>,
+ <PAD_FUNC_SHARE(121)>,
+ <PAD_FUNC_SHARE(122)>,
+ <PAD_FUNC_SHARE(123)>,
+ <PAD_FUNC_SHARE(124)>,
+ <PAD_FUNC_SHARE(125)>,
+ <PAD_FUNC_SHARE(126)>;
+ bias-pull-up;
+ drive-strength = <35>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ rxclk-pins {
+ pins = <PAD_FUNC_SHARE(127)>;
+ bias-pull-up;
+ drive-strength = <14>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <6>;
+ };
+ rxer-pins {
+ pins = <PAD_FUNC_SHARE(129)>;
+ bias-pull-up;
+ drive-strength = <14>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ rx-pins {
+ pins = <PAD_FUNC_SHARE(128)>,
+ <PAD_FUNC_SHARE(130)>,
+ <PAD_FUNC_SHARE(131)>,
+ <PAD_FUNC_SHARE(132)>,
+ <PAD_FUNC_SHARE(133)>,
+ <PAD_FUNC_SHARE(134)>,
+ <PAD_FUNC_SHARE(135)>,
+ <PAD_FUNC_SHARE(136)>,
+ <PAD_FUNC_SHARE(137)>,
+ <PAD_FUNC_SHARE(138)>,
+ <PAD_FUNC_SHARE(139)>,
+ <PAD_FUNC_SHARE(140)>,
+ <PAD_FUNC_SHARE(141)>;
+ bias-pull-up;
+ drive-strength = <14>;
+ input-enable;
+ input-schmitt-enable;
+ slew-rate = <0>;
+ };
+ };
+
i2c0_pins: i2c0-0 {
i2c-pins {
pinmux = <GPIOMUX(62, GPO_LOW,
@@ -115,6 +199,24 @@
};
};
+ pwm_pins: pwm-0 {
+ pwm-pins {
+ pinmux = <GPIOMUX(7,
+ GPO_PWM_PAD_OUT_BIT0,
+ GPO_PWM_PAD_OE_N_BIT0,
+ GPI_NONE)>,
+ <GPIOMUX(5,
+ GPO_PWM_PAD_OUT_BIT1,
+ GPO_PWM_PAD_OE_N_BIT1,
+ GPI_NONE)>;
+ bias-disable;
+ drive-strength = <35>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
sdio0_pins: sdio0-0 {
clk-pins {
pinmux = <GPIOMUX(54, GPO_SDIO0_PAD_CCLK_OUT,
@@ -257,6 +359,12 @@
clock-frequency = <27000000>;
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+ status = "okay";
+};
+
&sdio0 {
broken-cd;
bus-width = <4>;
diff --git a/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
index e82af72f1a..692c696e1a 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
+++ b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
@@ -6,7 +6,6 @@
/dts-v1/;
#include "jh7100-common.dtsi"
-#include <dt-bindings/gpio/gpio.h>
/ {
model = "StarFive VisionFive V1";
@@ -18,3 +17,24 @@
priority = <224>;
};
};
+
+&gmac {
+ phy-handle = <&phy>;
+};
+
+/*
+ * The board uses a Motorcomm YT8521 PHY supporting RGMII-ID, but requires
+ * manual adjustment of the RX internal delay to work properly. The default
+ * RX delay provided by the driver (1.95ns) is too high, but applying a 50%
+ * reduction seems to mitigate the issue.
+ *
+ * It is worth noting the adjustment is not necessary on BeagleV Starlight SBC,
+ * which uses a Microchip PHY. Hence, most likely the Motorcomm PHY is the one
+ * responsible for the misbehaviour, not the GMAC.
+ */
+&mdio {
+ phy: ethernet-phy@0 {
+ reg = <0>;
+ rx-internal-delay-ps = <900>;
+ };
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
index 5d499d8aa8..9a2e9583af 100644
--- a/arch/riscv/boot/dts/starfive/jh7100.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
@@ -208,6 +208,37 @@
status = "disabled";
};
+ gmac: ethernet@10020000 {
+ compatible = "starfive,jh7100-dwmac", "snps,dwmac";
+ reg = <0x0 0x10020000 0x0 0x10000>;
+ clocks = <&clkgen JH7100_CLK_GMAC_ROOT_DIV>,
+ <&clkgen JH7100_CLK_GMAC_AHB>,
+ <&clkgen JH7100_CLK_GMAC_PTP_REF>,
+ <&clkgen JH7100_CLK_GMAC_TX_INV>,
+ <&clkgen JH7100_CLK_GMAC_GTX>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "gtx";
+ resets = <&rstgen JH7100_RSTN_GMAC_AHB>;
+ reset-names = "ahb";
+ interrupts = <6>, <7>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ max-frame-size = <9000>;
+ snps,multicast-filter-bins = <32>;
+ snps,perfect-filter-entries = <128>;
+ starfive,syscon = <&sysmain 0x70 0>;
+ rx-fifo-depth = <32768>;
+ tx-fifo-depth = <16384>;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,fixed-burst;
+ snps,force_thresh_dma_mode;
+ status = "disabled";
+
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <16>;
+ snps,rd_osr_lmt = <16>;
+ snps,blen = <256 128 64 32 0 0 0>;
+ };
+ };
+
clkgen: clock-controller@11800000 {
compatible = "starfive,jh7100-clkgen";
reg = <0x0 0x11800000 0x0 0x10000>;
@@ -222,6 +253,11 @@
#reset-cells = <1>;
};
+ sysmain: syscon@11850000 {
+ compatible = "starfive,jh7100-sysmain", "syscon";
+ reg = <0x0 0x11850000 0x0 0x10000>;
+ };
+
i2c0: i2c@118b0000 {
compatible = "snps,designware-i2c";
reg = <0x0 0x118b0000 0x0 0x10000>;
@@ -324,6 +360,15 @@
<&rstgen JH7100_RSTN_WDT>;
};
+ pwm: pwm@12490000 {
+ compatible = "starfive,jh7100-pwm", "opencores,pwm-v1";
+ reg = <0x0 0x12490000 0x0 0x10000>;
+ clocks = <&clkgen JH7100_CLK_PWM_APB>;
+ resets = <&rstgen JH7100_RSTN_PWM_APB>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
sfctemp: temperature-sensor@124a0000 {
compatible = "starfive,jh7100-temp";
reg = <0x0 0x124a0000 0x0 0x10000>;
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index b89e9791ef..ccd0ce55aa 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -125,6 +125,55 @@
clock-frequency = <49152000>;
};
+&camss {
+ assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
+ <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
+ assigned-clock-rates = <49500000>, <198000000>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+
+ camss_from_csi2rx: endpoint {
+ remote-endpoint = <&csi2rx_to_camss>;
+ };
+ };
+ };
+};
+
+&csi2rx {
+ assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
+ assigned-clock-rates = <297000000>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ /* remote MIPI sensor endpoint */
+ };
+
+ port@1 {
+ reg = <1>;
+
+ csi2rx_to_camss: endpoint {
+ remote-endpoint = <&camss_from_csi2rx>;
+ };
+ };
+ };
+};
+
&gmac0 {
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
@@ -189,7 +238,6 @@
axp15060: pmic@36 {
compatible = "x-powers,axp15060";
reg = <0x36>;
- interrupts = <0>;
interrupt-controller;
#interrupt-cells = <1>;
@@ -230,24 +278,6 @@
status = "okay";
};
-&i2srx {
- pinctrl-names = "default";
- pinctrl-0 = <&i2srx_pins>;
- status = "okay";
-};
-
-&i2stx0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mclk_ext_pins>;
- status = "okay";
-};
-
-&i2stx1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2stx1_pins>;
- status = "okay";
-};
-
&mmc0 {
max-frequency = <100000000>;
assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
@@ -323,6 +353,12 @@
};
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+ status = "okay";
+};
+
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
@@ -392,46 +428,6 @@
};
};
- i2srx_pins: i2srx-0 {
- clk-sd-pins {
- pinmux = <GPIOMUX(38, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_I2SRX_BCLK)>,
- <GPIOMUX(63, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_I2SRX_LRCK)>,
- <GPIOMUX(38, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_I2STX1_BCLK)>,
- <GPIOMUX(63, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_I2STX1_LRCK)>,
- <GPIOMUX(61, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_I2SRX_SDIN0)>;
- input-enable;
- };
- };
-
- i2stx1_pins: i2stx1-0 {
- sd-pins {
- pinmux = <GPIOMUX(44, GPOUT_SYS_I2STX1_SDO0,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-disable;
- input-disable;
- };
- };
-
- mclk_ext_pins: mclk-ext-0 {
- mclk-ext-pins {
- pinmux = <GPIOMUX(4, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_MCLK_EXT)>;
- input-enable;
- };
- };
-
mmc0_pins: mmc0-0 {
rst-pins {
pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
@@ -513,6 +509,22 @@
};
};
+ pwm_pins: pwm-0 {
+ pwm-pins {
+ pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0,
+ GPOEN_SYS_PWM0_CHANNEL0,
+ GPI_NONE)>,
+ <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1,
+ GPOEN_SYS_PWM0_CHANNEL1,
+ GPI_NONE)>;
+ bias-disable;
+ drive-strength = <12>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
spi0_pins: spi0-0 {
mosi-pins {
pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
@@ -551,40 +563,6 @@
};
};
- tdm_pins: tdm-0 {
- tx-pins {
- pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-pull-up;
- drive-strength = <2>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
-
- rx-pins {
- pinmux = <GPIOMUX(61, GPOUT_HIGH,
- GPOEN_DISABLE,
- GPI_SYS_TDM_RXD)>;
- input-enable;
- };
-
- sync-pins {
- pinmux = <GPIOMUX(63, GPOUT_HIGH,
- GPOEN_DISABLE,
- GPI_SYS_TDM_SYNC)>;
- input-enable;
- };
-
- pcmclk-pins {
- pinmux = <GPIOMUX(38, GPOUT_HIGH,
- GPOEN_DISABLE,
- GPI_SYS_TDM_CLK)>;
- input-enable;
- };
- };
-
uart0_pins: uart0-0 {
tx-pins {
pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
@@ -610,12 +588,6 @@
};
};
-&tdm {
- pinctrl-names = "default";
- pinctrl-0 = <&tdm_pins>;
- status = "okay";
-};
-
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 74ed3b9264..4a5708f7fc 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -829,6 +829,15 @@
status = "disabled";
};
+ pwm: pwm@120d0000 {
+ compatible = "starfive,jh7110-pwm", "opencores,pwm-v1";
+ reg = <0x0 0x120d0000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_PWM_APB>;
+ resets = <&syscrg JH7110_SYSRST_PWM_APB>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
sfctemp: temperature-sensor@120e0000 {
compatible = "starfive,jh7110-temp";
reg = <0x0 0x120e0000 0x0 0x10000>;
@@ -1104,6 +1113,32 @@
#power-domain-cells = <1>;
};
+ csi2rx: csi@19800000 {
+ compatible = "starfive,jh7110-csi2rx", "cdns,csi2rx";
+ reg = <0x0 0x19800000 0x0 0x10000>;
+ clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>,
+ <&ispcrg JH7110_ISPCLK_VIN_APB>,
+ <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF0>,
+ <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF1>,
+ <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF2>,
+ <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF3>;
+ clock-names = "sys_clk", "p_clk",
+ "pixel_if0_clk", "pixel_if1_clk",
+ "pixel_if2_clk", "pixel_if3_clk";
+ resets = <&ispcrg JH7110_ISPRST_VIN_SYS>,
+ <&ispcrg JH7110_ISPRST_VIN_APB>,
+ <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF0>,
+ <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF1>,
+ <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF2>,
+ <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF3>;
+ reset-names = "sys", "reg_bank",
+ "pixel_if0", "pixel_if1",
+ "pixel_if2", "pixel_if3";
+ phys = <&csi_phy>;
+ phy-names = "dphy";
+ status = "disabled";
+ };
+
ispcrg: clock-controller@19810000 {
compatible = "starfive,jh7110-ispcrg";
reg = <0x0 0x19810000 0x0 0x10000>;
@@ -1121,6 +1156,47 @@
power-domains = <&pwrc JH7110_PD_ISP>;
};
+ csi_phy: phy@19820000 {
+ compatible = "starfive,jh7110-dphy-rx";
+ reg = <0x0 0x19820000 0x0 0x10000>;
+ clocks = <&ispcrg JH7110_ISPCLK_M31DPHY_CFG_IN>,
+ <&ispcrg JH7110_ISPCLK_M31DPHY_REF_IN>,
+ <&ispcrg JH7110_ISPCLK_M31DPHY_TX_ESC_LAN0>;
+ clock-names = "cfg", "ref", "tx";
+ resets = <&ispcrg JH7110_ISPRST_M31DPHY_HW>,
+ <&ispcrg JH7110_ISPRST_M31DPHY_B09_AON>;
+ power-domains = <&aon_syscon JH7110_AON_PD_DPHY_RX>;
+ #phy-cells = <0>;
+ };
+
+ camss: isp@19840000 {
+ compatible = "starfive,jh7110-camss";
+ reg = <0x0 0x19840000 0x0 0x10000>,
+ <0x0 0x19870000 0x0 0x30000>;
+ reg-names = "syscon", "isp";
+ clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
+ <&ispcrg JH7110_ISPCLK_ISPV2_TOP_WRAPPER_C>,
+ <&ispcrg JH7110_ISPCLK_DVP_INV>,
+ <&ispcrg JH7110_ISPCLK_VIN_P_AXI_WR>,
+ <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>,
+ <&syscrg JH7110_SYSCLK_ISP_TOP_CORE>,
+ <&syscrg JH7110_SYSCLK_ISP_TOP_AXI>;
+ clock-names = "apb_func", "wrapper_clk_c", "dvp_inv",
+ "axiwr", "mipi_rx0_pxl", "ispcore_2x",
+ "isp_axi";
+ resets = <&ispcrg JH7110_ISPRST_ISPV2_TOP_WRAPPER_P>,
+ <&ispcrg JH7110_ISPRST_ISPV2_TOP_WRAPPER_C>,
+ <&ispcrg JH7110_ISPRST_VIN_P_AXI_RD>,
+ <&ispcrg JH7110_ISPRST_VIN_P_AXI_WR>,
+ <&syscrg JH7110_SYSRST_ISP_TOP>,
+ <&syscrg JH7110_SYSRST_ISP_TOP_AXI>;
+ reset-names = "wrapper_p", "wrapper_c", "axird",
+ "axiwr", "isp_top_n", "isp_top_axi";
+ power-domains = <&pwrc JH7110_PD_ISP>;
+ interrupts = <92>, <87>, <90>, <88>;
+ status = "disabled";
+ };
+
voutcrg: clock-controller@295c0000 {
compatible = "starfive,jh7110-voutcrg";
reg = <0x0 0x295c0000 0x0 0x10000>;
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 09:42:03 +0000