diff options
Diffstat (limited to 'arch/riscv/include/asm/uaccess.h')
| -rw-r--r-- | arch/riscv/include/asm/uaccess.h | 341 |
1 files changed, 341 insertions, 0 deletions
diff --git a/arch/riscv/include/asm/uaccess.h b/arch/riscv/include/asm/uaccess.h new file mode 100644 index 0000000000..ec0cab9fbd --- /dev/null +++ b/arch/riscv/include/asm/uaccess.h @@ -0,0 +1,341 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2012 Regents of the University of California + * + * This file was copied from include/asm-generic/uaccess.h + */ + +#ifndef _ASM_RISCV_UACCESS_H +#define _ASM_RISCV_UACCESS_H + +#include <asm/asm-extable.h> +#include <asm/pgtable.h> /* for TASK_SIZE */ + +/* + * User space memory access functions + */ +#ifdef CONFIG_MMU +#include <linux/errno.h> +#include <linux/compiler.h> +#include <linux/thread_info.h> +#include <asm/byteorder.h> +#include <asm/extable.h> +#include <asm/asm.h> +#include <asm-generic/access_ok.h> + +#define __enable_user_access() \ + __asm__ __volatile__ ("csrs sstatus, %0" : : "r" (SR_SUM) : "memory") +#define __disable_user_access() \ + __asm__ __volatile__ ("csrc sstatus, %0" : : "r" (SR_SUM) : "memory") + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +#define __LSW 0 +#define __MSW 1 + +/* + * The "__xxx" versions of the user access functions do not verify the address + * space - it must have been done previously with a separate "access_ok()" + * call. + */ + +#define __get_user_asm(insn, x, ptr, err) \ +do { \ + __typeof__(x) __x; \ + __asm__ __volatile__ ( \ + "1:\n" \ + " " insn " %1, %2\n" \ + "2:\n" \ + _ASM_EXTABLE_UACCESS_ERR_ZERO(1b, 2b, %0, %1) \ + : "+r" (err), "=&r" (__x) \ + : "m" (*(ptr))); \ + (x) = __x; \ +} while (0) + +#ifdef CONFIG_64BIT +#define __get_user_8(x, ptr, err) \ + __get_user_asm("ld", x, ptr, err) +#else /* !CONFIG_64BIT */ +#define __get_user_8(x, ptr, err) \ +do { \ + u32 __user *__ptr = (u32 __user *)(ptr); \ + u32 __lo, __hi; \ + __asm__ __volatile__ ( \ + "1:\n" \ + " lw %1, %3\n" \ + "2:\n" \ + " lw %2, %4\n" \ + "3:\n" \ + _ASM_EXTABLE_UACCESS_ERR_ZERO(1b, 3b, %0, %1) \ + _ASM_EXTABLE_UACCESS_ERR_ZERO(2b, 3b, %0, %1) \ + : "+r" (err), "=&r" (__lo), "=r" (__hi) \ + : "m" (__ptr[__LSW]), "m" (__ptr[__MSW])); \ + if (err) \ + __hi = 0; \ + (x) = (__typeof__(x))((__typeof__((x)-(x)))( \ + (((u64)__hi << 32) | __lo))); \ +} while (0) +#endif /* CONFIG_64BIT */ + +#define __get_user_nocheck(x, __gu_ptr, __gu_err) \ +do { \ + switch (sizeof(*__gu_ptr)) { \ + case 1: \ + __get_user_asm("lb", (x), __gu_ptr, __gu_err); \ + break; \ + case 2: \ + __get_user_asm("lh", (x), __gu_ptr, __gu_err); \ + break; \ + case 4: \ + __get_user_asm("lw", (x), __gu_ptr, __gu_err); \ + break; \ + case 8: \ + __get_user_8((x), __gu_ptr, __gu_err); \ + break; \ + default: \ + BUILD_BUG(); \ + } \ +} while (0) + +/** + * __get_user: - Get a simple variable from user space, with less checking. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define __get_user(x, ptr) \ +({ \ + const __typeof__(*(ptr)) __user *__gu_ptr = (ptr); \ + long __gu_err = 0; \ + \ + __chk_user_ptr(__gu_ptr); \ + \ + __enable_user_access(); \ + __get_user_nocheck(x, __gu_ptr, __gu_err); \ + __disable_user_access(); \ + \ + __gu_err; \ +}) + +/** + * get_user: - Get a simple variable from user space. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define get_user(x, ptr) \ +({ \ + const __typeof__(*(ptr)) __user *__p = (ptr); \ + might_fault(); \ + access_ok(__p, sizeof(*__p)) ? \ + __get_user((x), __p) : \ + ((x) = (__force __typeof__(x))0, -EFAULT); \ +}) + +#define __put_user_asm(insn, x, ptr, err) \ +do { \ + __typeof__(*(ptr)) __x = x; \ + __asm__ __volatile__ ( \ + "1:\n" \ + " " insn " %z2, %1\n" \ + "2:\n" \ + _ASM_EXTABLE_UACCESS_ERR(1b, 2b, %0) \ + : "+r" (err), "=m" (*(ptr)) \ + : "rJ" (__x)); \ +} while (0) + +#ifdef CONFIG_64BIT +#define __put_user_8(x, ptr, err) \ + __put_user_asm("sd", x, ptr, err) +#else /* !CONFIG_64BIT */ +#define __put_user_8(x, ptr, err) \ +do { \ + u32 __user *__ptr = (u32 __user *)(ptr); \ + u64 __x = (__typeof__((x)-(x)))(x); \ + __asm__ __volatile__ ( \ + "1:\n" \ + " sw %z3, %1\n" \ + "2:\n" \ + " sw %z4, %2\n" \ + "3:\n" \ + _ASM_EXTABLE_UACCESS_ERR(1b, 3b, %0) \ + _ASM_EXTABLE_UACCESS_ERR(2b, 3b, %0) \ + : "+r" (err), \ + "=m" (__ptr[__LSW]), \ + "=m" (__ptr[__MSW]) \ + : "rJ" (__x), "rJ" (__x >> 32)); \ +} while (0) +#endif /* CONFIG_64BIT */ + +#define __put_user_nocheck(x, __gu_ptr, __pu_err) \ +do { \ + switch (sizeof(*__gu_ptr)) { \ + case 1: \ + __put_user_asm("sb", (x), __gu_ptr, __pu_err); \ + break; \ + case 2: \ + __put_user_asm("sh", (x), __gu_ptr, __pu_err); \ + break; \ + case 4: \ + __put_user_asm("sw", (x), __gu_ptr, __pu_err); \ + break; \ + case 8: \ + __put_user_8((x), __gu_ptr, __pu_err); \ + break; \ + default: \ + BUILD_BUG(); \ + } \ +} while (0) + +/** + * __put_user: - Write a simple value into user space, with less checking. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. The value of @x is copied to avoid + * re-ordering where @x is evaluated inside the block that enables user-space + * access (thus bypassing user space protection if @x is a function). + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + */ +#define __put_user(x, ptr) \ +({ \ + __typeof__(*(ptr)) __user *__gu_ptr = (ptr); \ + __typeof__(*__gu_ptr) __val = (x); \ + long __pu_err = 0; \ + \ + __chk_user_ptr(__gu_ptr); \ + \ + __enable_user_access(); \ + __put_user_nocheck(__val, __gu_ptr, __pu_err); \ + __disable_user_access(); \ + \ + __pu_err; \ +}) + +/** + * put_user: - Write a simple value into user space. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Returns zero on success, or -EFAULT on error. + */ +#define put_user(x, ptr) \ +({ \ + __typeof__(*(ptr)) __user *__p = (ptr); \ + might_fault(); \ + access_ok(__p, sizeof(*__p)) ? \ + __put_user((x), __p) : \ + -EFAULT; \ +}) + + +unsigned long __must_check __asm_copy_to_user(void __user *to, + const void *from, unsigned long n); +unsigned long __must_check __asm_copy_from_user(void *to, + const void __user *from, unsigned long n); + +static inline unsigned long +raw_copy_from_user(void *to, const void __user *from, unsigned long n) +{ + return __asm_copy_from_user(to, from, n); +} + +static inline unsigned long +raw_copy_to_user(void __user *to, const void *from, unsigned long n) +{ + return __asm_copy_to_user(to, from, n); +} + +extern long strncpy_from_user(char *dest, const char __user *src, long count); + +extern long __must_check strnlen_user(const char __user *str, long n); + +extern +unsigned long __must_check __clear_user(void __user *addr, unsigned long n); + +static inline +unsigned long __must_check clear_user(void __user *to, unsigned long n) +{ + might_fault(); + return access_ok(to, n) ? + __clear_user(to, n) : n; +} + +#define __get_kernel_nofault(dst, src, type, err_label) \ +do { \ + long __kr_err; \ + \ + __get_user_nocheck(*((type *)(dst)), (type *)(src), __kr_err); \ + if (unlikely(__kr_err)) \ + goto err_label; \ +} while (0) + +#define __put_kernel_nofault(dst, src, type, err_label) \ +do { \ + long __kr_err; \ + \ + __put_user_nocheck(*((type *)(src)), (type *)(dst), __kr_err); \ + if (unlikely(__kr_err)) \ + goto err_label; \ +} while (0) + +#else /* CONFIG_MMU */ +#include <asm-generic/uaccess.h> +#endif /* CONFIG_MMU */ +#endif /* _ASM_RISCV_UACCESS_H */ |