summaryrefslogtreecommitdiffstats
path: root/arch/sh/drivers/dma
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--arch/sh/drivers/dma/Kconfig76
-rw-r--r--arch/sh/drivers/dma/Makefile9
-rw-r--r--arch/sh/drivers/dma/dma-api.c417
-rw-r--r--arch/sh/drivers/dma/dma-g2.c197
-rw-r--r--arch/sh/drivers/dma/dma-pvr2.c102
-rw-r--r--arch/sh/drivers/dma/dma-sh.c425
-rw-r--r--arch/sh/drivers/dma/dma-sysfs.c170
-rw-r--r--arch/sh/drivers/dma/dmabrg.c196
8 files changed, 1592 insertions, 0 deletions
diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
new file mode 100644
index 0000000000..08d937a6d2
--- /dev/null
+++ b/arch/sh/drivers/dma/Kconfig
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+menu "DMA support"
+
+
+config SH_DMA
+ bool "SuperH on-chip DMA controller (DMAC) support"
+ depends on CPU_SH3 || CPU_SH4
+ default n
+
+config SH_DMA_IRQ_MULTI
+ bool
+ depends on SH_DMA
+ default y if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || \
+ CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \
+ CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091 || \
+ CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7780 || \
+ CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7760
+
+config SH_DMA_API
+ depends on SH_DMA
+ bool "SuperH DMA API support"
+ default n
+ help
+ SH_DMA_API always enabled DMA API of used SuperH.
+ If you want to use DMA ENGINE, you must not enable this.
+ Please enable DMA_ENGINE and SH_DMAE.
+
+config NR_ONCHIP_DMA_CHANNELS
+ int
+ depends on SH_DMA
+ default "4" if CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7750 || \
+ CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7751 || \
+ CPU_SUBTYPE_SH7091
+ default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || \
+ CPU_SUBTYPE_SH7760
+ default "12" if CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7724 || \
+ CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+ default "6"
+ help
+ This allows you to specify the number of channels that the on-chip
+ DMAC supports. This will be 4 for SH7709/SH7750/SH7750S/SH7751/SH7091,
+ 8 for SH7750R/SH7751R/SH7760, and 12 for SH7723/SH7724/SH7780/SH7785.
+ Default is 6.
+
+config SH_DMABRG
+ bool "SH7760 DMABRG support"
+ depends on CPU_SUBTYPE_SH7760
+ help
+ The DMABRG does data transfers from main memory to Audio/USB units
+ of the SH7760.
+ Say Y if you want to use Audio/USB DMA on your SH7760 board.
+
+config PVR2_DMA
+ tristate "PowerVR 2 DMAC support"
+ depends on SH_DREAMCAST && SH_DMA
+ help
+ Selecting this will enable support for the PVR2 DMA controller.
+ As this chains off of the on-chip DMAC, that must also be
+ enabled by default.
+
+ This is primarily used by the pvr2fb framebuffer driver for
+ certain optimizations, but is not necessary for functionality.
+
+ If in doubt, say N.
+
+config G2_DMA
+ tristate "G2 Bus DMA support"
+ depends on SH_DREAMCAST && SH_DMA_API
+ help
+ This enables support for the DMA controller for the Dreamcast's
+ G2 bus. Drivers that want this will generally enable this on
+ their own.
+
+ If in doubt, say N.
+
+endmenu
diff --git a/arch/sh/drivers/dma/Makefile b/arch/sh/drivers/dma/Makefile
new file mode 100644
index 0000000000..d2fdd56208
--- /dev/null
+++ b/arch/sh/drivers/dma/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the SuperH DMA specific kernel interface routines under Linux.
+#
+
+obj-$(CONFIG_SH_DMA_API) += dma-sh.o dma-api.o dma-sysfs.o
+obj-$(CONFIG_PVR2_DMA) += dma-pvr2.o
+obj-$(CONFIG_G2_DMA) += dma-g2.o
+obj-$(CONFIG_SH_DMABRG) += dmabrg.o
diff --git a/arch/sh/drivers/dma/dma-api.c b/arch/sh/drivers/dma/dma-api.c
new file mode 100644
index 0000000000..89cd4a3b4c
--- /dev/null
+++ b/arch/sh/drivers/dma/dma-api.c
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/sh/drivers/dma/dma-api.c
+ *
+ * SuperH-specific DMA management API
+ *
+ * Copyright (C) 2003, 2004, 2005 Paul Mundt
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <asm/dma.h>
+
+DEFINE_SPINLOCK(dma_spin_lock);
+static LIST_HEAD(registered_dmac_list);
+
+struct dma_info *get_dma_info(unsigned int chan)
+{
+ struct dma_info *info;
+
+ /*
+ * Look for each DMAC's range to determine who the owner of
+ * the channel is.
+ */
+ list_for_each_entry(info, &registered_dmac_list, list) {
+ if ((chan < info->first_vchannel_nr) ||
+ (chan >= info->first_vchannel_nr + info->nr_channels))
+ continue;
+
+ return info;
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL(get_dma_info);
+
+struct dma_info *get_dma_info_by_name(const char *dmac_name)
+{
+ struct dma_info *info;
+
+ list_for_each_entry(info, &registered_dmac_list, list) {
+ if (dmac_name && (strcmp(dmac_name, info->name) != 0))
+ continue;
+ else
+ return info;
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL(get_dma_info_by_name);
+
+static unsigned int get_nr_channels(void)
+{
+ struct dma_info *info;
+ unsigned int nr = 0;
+
+ if (unlikely(list_empty(&registered_dmac_list)))
+ return nr;
+
+ list_for_each_entry(info, &registered_dmac_list, list)
+ nr += info->nr_channels;
+
+ return nr;
+}
+
+struct dma_channel *get_dma_channel(unsigned int chan)
+{
+ struct dma_info *info = get_dma_info(chan);
+ struct dma_channel *channel;
+ int i;
+
+ if (unlikely(!info))
+ return ERR_PTR(-EINVAL);
+
+ for (i = 0; i < info->nr_channels; i++) {
+ channel = &info->channels[i];
+ if (channel->vchan == chan)
+ return channel;
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL(get_dma_channel);
+
+int get_dma_residue(unsigned int chan)
+{
+ struct dma_info *info = get_dma_info(chan);
+ struct dma_channel *channel = get_dma_channel(chan);
+
+ if (info->ops->get_residue)
+ return info->ops->get_residue(channel);
+
+ return 0;
+}
+EXPORT_SYMBOL(get_dma_residue);
+
+static int search_cap(const char **haystack, const char *needle)
+{
+ const char **p;
+
+ for (p = haystack; *p; p++)
+ if (strcmp(*p, needle) == 0)
+ return 1;
+
+ return 0;
+}
+
+/**
+ * request_dma_bycap - Allocate a DMA channel based on its capabilities
+ * @dmac: List of DMA controllers to search
+ * @caps: List of capabilities
+ *
+ * Search all channels of all DMA controllers to find a channel which
+ * matches the requested capabilities. The result is the channel
+ * number if a match is found, or %-ENODEV if no match is found.
+ *
+ * Note that not all DMA controllers export capabilities, in which
+ * case they can never be allocated using this API, and so
+ * request_dma() must be used specifying the channel number.
+ */
+int request_dma_bycap(const char **dmac, const char **caps, const char *dev_id)
+{
+ unsigned int found = 0;
+ struct dma_info *info;
+ const char **p;
+ int i;
+
+ BUG_ON(!dmac || !caps);
+
+ list_for_each_entry(info, &registered_dmac_list, list)
+ if (strcmp(*dmac, info->name) == 0) {
+ found = 1;
+ break;
+ }
+
+ if (!found)
+ return -ENODEV;
+
+ for (i = 0; i < info->nr_channels; i++) {
+ struct dma_channel *channel = &info->channels[i];
+
+ if (unlikely(!channel->caps))
+ continue;
+
+ for (p = caps; *p; p++) {
+ if (!search_cap(channel->caps, *p))
+ break;
+ if (request_dma(channel->chan, dev_id) == 0)
+ return channel->chan;
+ }
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(request_dma_bycap);
+
+int dmac_search_free_channel(const char *dev_id)
+{
+ struct dma_channel *channel = { 0 };
+ struct dma_info *info = get_dma_info(0);
+ int i;
+
+ for (i = 0; i < info->nr_channels; i++) {
+ channel = &info->channels[i];
+ if (unlikely(!channel))
+ return -ENODEV;
+
+ if (atomic_read(&channel->busy) == 0)
+ break;
+ }
+
+ if (info->ops->request) {
+ int result = info->ops->request(channel);
+ if (result)
+ return result;
+
+ atomic_set(&channel->busy, 1);
+ return channel->chan;
+ }
+
+ return -ENOSYS;
+}
+
+int request_dma(unsigned int chan, const char *dev_id)
+{
+ struct dma_channel *channel = { 0 };
+ struct dma_info *info = get_dma_info(chan);
+ int result;
+
+ channel = get_dma_channel(chan);
+ if (atomic_xchg(&channel->busy, 1))
+ return -EBUSY;
+
+ strscpy(channel->dev_id, dev_id, sizeof(channel->dev_id));
+
+ if (info->ops->request) {
+ result = info->ops->request(channel);
+ if (result)
+ atomic_set(&channel->busy, 0);
+
+ return result;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(request_dma);
+
+void free_dma(unsigned int chan)
+{
+ struct dma_info *info = get_dma_info(chan);
+ struct dma_channel *channel = get_dma_channel(chan);
+
+ if (info->ops->free)
+ info->ops->free(channel);
+
+ atomic_set(&channel->busy, 0);
+}
+EXPORT_SYMBOL(free_dma);
+
+void dma_wait_for_completion(unsigned int chan)
+{
+ struct dma_info *info = get_dma_info(chan);
+ struct dma_channel *channel = get_dma_channel(chan);
+
+ if (channel->flags & DMA_TEI_CAPABLE) {
+ wait_event(channel->wait_queue,
+ (info->ops->get_residue(channel) == 0));
+ return;
+ }
+
+ while (info->ops->get_residue(channel))
+ cpu_relax();
+}
+EXPORT_SYMBOL(dma_wait_for_completion);
+
+int register_chan_caps(const char *dmac, struct dma_chan_caps *caps)
+{
+ struct dma_info *info;
+ unsigned int found = 0;
+ int i;
+
+ list_for_each_entry(info, &registered_dmac_list, list)
+ if (strcmp(dmac, info->name) == 0) {
+ found = 1;
+ break;
+ }
+
+ if (unlikely(!found))
+ return -ENODEV;
+
+ for (i = 0; i < info->nr_channels; i++, caps++) {
+ struct dma_channel *channel;
+
+ if ((info->first_channel_nr + i) != caps->ch_num)
+ return -EINVAL;
+
+ channel = &info->channels[i];
+ channel->caps = caps->caplist;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(register_chan_caps);
+
+void dma_configure_channel(unsigned int chan, unsigned long flags)
+{
+ struct dma_info *info = get_dma_info(chan);
+ struct dma_channel *channel = get_dma_channel(chan);
+
+ if (info->ops->configure)
+ info->ops->configure(channel, flags);
+}
+EXPORT_SYMBOL(dma_configure_channel);
+
+int dma_xfer(unsigned int chan, unsigned long from,
+ unsigned long to, size_t size, unsigned int mode)
+{
+ struct dma_info *info = get_dma_info(chan);
+ struct dma_channel *channel = get_dma_channel(chan);
+
+ channel->sar = from;
+ channel->dar = to;
+ channel->count = size;
+ channel->mode = mode;
+
+ return info->ops->xfer(channel);
+}
+EXPORT_SYMBOL(dma_xfer);
+
+int dma_extend(unsigned int chan, unsigned long op, void *param)
+{
+ struct dma_info *info = get_dma_info(chan);
+ struct dma_channel *channel = get_dma_channel(chan);
+
+ if (info->ops->extend)
+ return info->ops->extend(channel, op, param);
+
+ return -ENOSYS;
+}
+EXPORT_SYMBOL(dma_extend);
+
+static int dma_proc_show(struct seq_file *m, void *v)
+{
+ struct dma_info *info = v;
+
+ if (list_empty(&registered_dmac_list))
+ return 0;
+
+ /*
+ * Iterate over each registered DMAC
+ */
+ list_for_each_entry(info, &registered_dmac_list, list) {
+ int i;
+
+ /*
+ * Iterate over each channel
+ */
+ for (i = 0; i < info->nr_channels; i++) {
+ struct dma_channel *channel = info->channels + i;
+
+ if (!(channel->flags & DMA_CONFIGURED))
+ continue;
+
+ seq_printf(m, "%2d: %14s %s\n", i,
+ info->name, channel->dev_id);
+ }
+ }
+
+ return 0;
+}
+
+int register_dmac(struct dma_info *info)
+{
+ unsigned int total_channels, i;
+
+ INIT_LIST_HEAD(&info->list);
+
+ printk(KERN_INFO "DMA: Registering %s handler (%d channel%s).\n",
+ info->name, info->nr_channels, info->nr_channels > 1 ? "s" : "");
+
+ BUG_ON((info->flags & DMAC_CHANNELS_CONFIGURED) && !info->channels);
+
+ info->pdev = platform_device_register_simple(info->name, -1,
+ NULL, 0);
+ if (IS_ERR(info->pdev))
+ return PTR_ERR(info->pdev);
+
+ /*
+ * Don't touch pre-configured channels
+ */
+ if (!(info->flags & DMAC_CHANNELS_CONFIGURED)) {
+ unsigned int size;
+
+ size = sizeof(struct dma_channel) * info->nr_channels;
+
+ info->channels = kzalloc(size, GFP_KERNEL);
+ if (!info->channels)
+ return -ENOMEM;
+ }
+
+ total_channels = get_nr_channels();
+ info->first_vchannel_nr = total_channels;
+ for (i = 0; i < info->nr_channels; i++) {
+ struct dma_channel *chan = &info->channels[i];
+
+ atomic_set(&chan->busy, 0);
+
+ chan->chan = info->first_channel_nr + i;
+ chan->vchan = info->first_channel_nr + i + total_channels;
+
+ memcpy(chan->dev_id, "Unused", 7);
+
+ if (info->flags & DMAC_CHANNELS_TEI_CAPABLE)
+ chan->flags |= DMA_TEI_CAPABLE;
+
+ init_waitqueue_head(&chan->wait_queue);
+ dma_create_sysfs_files(chan, info);
+ }
+
+ list_add(&info->list, &registered_dmac_list);
+
+ return 0;
+}
+EXPORT_SYMBOL(register_dmac);
+
+void unregister_dmac(struct dma_info *info)
+{
+ unsigned int i;
+
+ for (i = 0; i < info->nr_channels; i++)
+ dma_remove_sysfs_files(info->channels + i, info);
+
+ if (!(info->flags & DMAC_CHANNELS_CONFIGURED))
+ kfree(info->channels);
+
+ list_del(&info->list);
+ platform_device_unregister(info->pdev);
+}
+EXPORT_SYMBOL(unregister_dmac);
+
+static int __init dma_api_init(void)
+{
+ printk(KERN_NOTICE "DMA: Registering DMA API.\n");
+ return proc_create_single("dma", 0, NULL, dma_proc_show) ? 0 : -ENOMEM;
+}
+subsys_initcall(dma_api_init);
+
+MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
+MODULE_DESCRIPTION("DMA API for SuperH");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
new file mode 100644
index 0000000000..52a8ae5e30
--- /dev/null
+++ b/arch/sh/drivers/dma/dma-g2.c
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/sh/drivers/dma/dma-g2.c
+ *
+ * G2 bus DMA support
+ *
+ * Copyright (C) 2003 - 2006 Paul Mundt
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <asm/cacheflush.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
+#include <asm/dma.h>
+
+struct g2_channel {
+ unsigned long g2_addr; /* G2 bus address */
+ unsigned long root_addr; /* Root bus (SH-4) address */
+ unsigned long size; /* Size (in bytes), 32-byte aligned */
+ unsigned long direction; /* Transfer direction */
+ unsigned long ctrl; /* Transfer control */
+ unsigned long chan_enable; /* Channel enable */
+ unsigned long xfer_enable; /* Transfer enable */
+ unsigned long xfer_stat; /* Transfer status */
+} __attribute__ ((aligned(32)));
+
+struct g2_status {
+ unsigned long g2_addr;
+ unsigned long root_addr;
+ unsigned long size;
+ unsigned long status;
+} __attribute__ ((aligned(16)));
+
+struct g2_dma_info {
+ struct g2_channel channel[G2_NR_DMA_CHANNELS];
+ unsigned long pad1[G2_NR_DMA_CHANNELS];
+ unsigned long wait_state;
+ unsigned long pad2[10];
+ unsigned long magic;
+ struct g2_status status[G2_NR_DMA_CHANNELS];
+} __attribute__ ((aligned(256)));
+
+static volatile struct g2_dma_info *g2_dma = (volatile struct g2_dma_info *)0xa05f7800;
+
+#define g2_bytes_remaining(i) \
+ ((g2_dma->channel[i].size - \
+ g2_dma->status[i].size) & 0x0fffffff)
+
+static irqreturn_t g2_dma_interrupt(int irq, void *dev_id)
+{
+ int i;
+
+ for (i = 0; i < G2_NR_DMA_CHANNELS; i++) {
+ if (g2_dma->status[i].status & 0x20000000) {
+ unsigned int bytes = g2_bytes_remaining(i);
+
+ if (likely(bytes == 0)) {
+ struct dma_info *info = dev_id;
+ struct dma_channel *chan = info->channels + i;
+
+ wake_up(&chan->wait_queue);
+
+ return IRQ_HANDLED;
+ }
+ }
+ }
+
+ return IRQ_NONE;
+}
+
+static int g2_enable_dma(struct dma_channel *chan)
+{
+ unsigned int chan_nr = chan->chan;
+
+ g2_dma->channel[chan_nr].chan_enable = 1;
+ g2_dma->channel[chan_nr].xfer_enable = 1;
+
+ return 0;
+}
+
+static int g2_disable_dma(struct dma_channel *chan)
+{
+ unsigned int chan_nr = chan->chan;
+
+ g2_dma->channel[chan_nr].chan_enable = 0;
+ g2_dma->channel[chan_nr].xfer_enable = 0;
+
+ return 0;
+}
+
+static int g2_xfer_dma(struct dma_channel *chan)
+{
+ unsigned int chan_nr = chan->chan;
+
+ if (chan->sar & 31) {
+ printk("g2dma: unaligned source 0x%lx\n", chan->sar);
+ return -EINVAL;
+ }
+
+ if (chan->dar & 31) {
+ printk("g2dma: unaligned dest 0x%lx\n", chan->dar);
+ return -EINVAL;
+ }
+
+ /* Align the count */
+ if (chan->count & 31)
+ chan->count = (chan->count + (32 - 1)) & ~(32 - 1);
+
+ /* Fixup destination */
+ chan->dar += 0xa0800000;
+
+ /* Fixup direction */
+ chan->mode = !chan->mode;
+
+ flush_icache_range((unsigned long)chan->sar, chan->count);
+
+ g2_disable_dma(chan);
+
+ g2_dma->channel[chan_nr].g2_addr = chan->dar & 0x1fffffe0;
+ g2_dma->channel[chan_nr].root_addr = chan->sar & 0x1fffffe0;
+ g2_dma->channel[chan_nr].size = (chan->count & ~31) | 0x80000000;
+ g2_dma->channel[chan_nr].direction = chan->mode;
+
+ /*
+ * bit 0 - ???
+ * bit 1 - if set, generate a hardware event on transfer completion
+ * bit 2 - ??? something to do with suspend?
+ */
+ g2_dma->channel[chan_nr].ctrl = 5; /* ?? */
+
+ g2_enable_dma(chan);
+
+ /* debug cruft */
+ pr_debug("count, sar, dar, mode, ctrl, chan, xfer: %ld, 0x%08lx, "
+ "0x%08lx, %ld, %ld, %ld, %ld\n",
+ g2_dma->channel[chan_nr].size,
+ g2_dma->channel[chan_nr].root_addr,
+ g2_dma->channel[chan_nr].g2_addr,
+ g2_dma->channel[chan_nr].direction,
+ g2_dma->channel[chan_nr].ctrl,
+ g2_dma->channel[chan_nr].chan_enable,
+ g2_dma->channel[chan_nr].xfer_enable);
+
+ return 0;
+}
+
+static int g2_get_residue(struct dma_channel *chan)
+{
+ return g2_bytes_remaining(chan->chan);
+}
+
+static struct dma_ops g2_dma_ops = {
+ .xfer = g2_xfer_dma,
+ .get_residue = g2_get_residue,
+};
+
+static struct dma_info g2_dma_info = {
+ .name = "g2_dmac",
+ .nr_channels = 4,
+ .ops = &g2_dma_ops,
+ .flags = DMAC_CHANNELS_TEI_CAPABLE,
+};
+
+static int __init g2_dma_init(void)
+{
+ int ret;
+
+ ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, 0,
+ "g2 DMA handler", &g2_dma_info);
+ if (unlikely(ret))
+ return -EINVAL;
+
+ /* Magic */
+ g2_dma->wait_state = 27;
+ g2_dma->magic = 0x4659404f;
+
+ ret = register_dmac(&g2_dma_info);
+ if (unlikely(ret != 0))
+ free_irq(HW_EVENT_G2_DMA, &g2_dma_info);
+
+ return ret;
+}
+
+static void __exit g2_dma_exit(void)
+{
+ free_irq(HW_EVENT_G2_DMA, &g2_dma_info);
+ unregister_dmac(&g2_dma_info);
+}
+
+subsys_initcall(g2_dma_init);
+module_exit(g2_dma_exit);
+
+MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
+MODULE_DESCRIPTION("G2 bus DMA driver");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
new file mode 100644
index 0000000000..21c347543e
--- /dev/null
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/sh/drivers/dma/dma-pvr2.c
+ *
+ * NEC PowerVR 2 (Dreamcast) DMA support
+ *
+ * Copyright (C) 2003, 2004 Paul Mundt
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+
+static unsigned int xfer_complete;
+static int count;
+
+static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id)
+{
+ if (get_dma_residue(PVR2_CASCADE_CHAN)) {
+ printk(KERN_WARNING "DMA: SH DMAC did not complete transfer "
+ "on channel %d, waiting..\n", PVR2_CASCADE_CHAN);
+ dma_wait_for_completion(PVR2_CASCADE_CHAN);
+ }
+
+ if (count++ < 10)
+ pr_debug("Got a pvr2 dma interrupt for channel %d\n",
+ irq - HW_EVENT_PVR2_DMA);
+
+ xfer_complete = 1;
+
+ return IRQ_HANDLED;
+}
+
+static int pvr2_request_dma(struct dma_channel *chan)
+{
+ if (__raw_readl(PVR2_DMA_MODE) != 0)
+ return -EBUSY;
+
+ __raw_writel(0, PVR2_DMA_LMMODE0);
+
+ return 0;
+}
+
+static int pvr2_get_dma_residue(struct dma_channel *chan)
+{
+ return xfer_complete == 0;
+}
+
+static int pvr2_xfer_dma(struct dma_channel *chan)
+{
+ if (chan->sar || !chan->dar)
+ return -EINVAL;
+
+ xfer_complete = 0;
+
+ __raw_writel(chan->dar, PVR2_DMA_ADDR);
+ __raw_writel(chan->count, PVR2_DMA_COUNT);
+ __raw_writel(chan->mode & DMA_MODE_MASK, PVR2_DMA_MODE);
+
+ return 0;
+}
+
+static struct dma_ops pvr2_dma_ops = {
+ .request = pvr2_request_dma,
+ .get_residue = pvr2_get_dma_residue,
+ .xfer = pvr2_xfer_dma,
+};
+
+static struct dma_info pvr2_dma_info = {
+ .name = "pvr2_dmac",
+ .nr_channels = 1,
+ .ops = &pvr2_dma_ops,
+ .flags = DMAC_CHANNELS_TEI_CAPABLE,
+};
+
+static int __init pvr2_dma_init(void)
+{
+ if (request_irq(HW_EVENT_PVR2_DMA, pvr2_dma_interrupt, 0,
+ "pvr2 DMA handler", NULL))
+ pr_err("Failed to register pvr2 DMA handler interrupt\n");
+ request_dma(PVR2_CASCADE_CHAN, "pvr2 cascade");
+
+ return register_dmac(&pvr2_dma_info);
+}
+
+static void __exit pvr2_dma_exit(void)
+{
+ free_dma(PVR2_CASCADE_CHAN);
+ free_irq(HW_EVENT_PVR2_DMA, 0);
+ unregister_dmac(&pvr2_dma_info);
+}
+
+subsys_initcall(pvr2_dma_init);
+module_exit(pvr2_dma_exit);
+
+MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
+MODULE_DESCRIPTION("NEC PowerVR 2 DMA driver");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
new file mode 100644
index 0000000000..306fba1564
--- /dev/null
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/sh/drivers/dma/dma-sh.c
+ *
+ * SuperH On-chip DMAC Support
+ *
+ * Copyright (C) 2000 Takashi YOSHII
+ * Copyright (C) 2003, 2004 Paul Mundt
+ * Copyright (C) 2005 Andriy Skulysh
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach-dreamcast/mach/dma.h>
+#include <asm/dma.h>
+#include <asm/dma-register.h>
+#include <cpu/dma-register.h>
+#include <cpu/dma.h>
+
+/*
+ * Some of the SoCs feature two DMAC modules. In such a case, the channels are
+ * distributed equally among them.
+ */
+#ifdef SH_DMAC_BASE1
+#define SH_DMAC_NR_MD_CH (CONFIG_NR_ONCHIP_DMA_CHANNELS / 2)
+#else
+#define SH_DMAC_NR_MD_CH CONFIG_NR_ONCHIP_DMA_CHANNELS
+#endif
+
+#define SH_DMAC_CH_SZ 0x10
+
+/*
+ * Define the default configuration for dual address memory-memory transfer.
+ * The 0x400 value represents auto-request, external->external.
+ */
+#define RS_DUAL (DM_INC | SM_INC | RS_AUTO | TS_INDEX2VAL(XMIT_SZ_32BIT))
+
+static unsigned long dma_find_base(unsigned int chan)
+{
+ unsigned long base = SH_DMAC_BASE0;
+
+#ifdef SH_DMAC_BASE1
+ if (chan >= SH_DMAC_NR_MD_CH)
+ base = SH_DMAC_BASE1;
+#endif
+
+ return base;
+}
+
+static unsigned long dma_base_addr(unsigned int chan)
+{
+ unsigned long base = dma_find_base(chan);
+
+ chan = (chan % SH_DMAC_NR_MD_CH) * SH_DMAC_CH_SZ;
+
+ /* DMAOR is placed inside the channel register space. Step over it. */
+ if (chan >= DMAOR)
+ base += SH_DMAC_CH_SZ;
+
+ return base + chan;
+}
+
+#ifdef CONFIG_SH_DMA_IRQ_MULTI
+static inline unsigned int get_dmte_irq(unsigned int chan)
+{
+ return chan >= 6 ? DMTE6_IRQ : DMTE0_IRQ;
+}
+#else
+
+static unsigned int dmte_irq_map[] = {
+ DMTE0_IRQ, DMTE0_IRQ + 1, DMTE0_IRQ + 2, DMTE0_IRQ + 3,
+
+#ifdef DMTE4_IRQ
+ DMTE4_IRQ, DMTE4_IRQ + 1,
+#endif
+
+#ifdef DMTE6_IRQ
+ DMTE6_IRQ, DMTE6_IRQ + 1,
+#endif
+
+#ifdef DMTE8_IRQ
+ DMTE8_IRQ, DMTE9_IRQ, DMTE10_IRQ, DMTE11_IRQ,
+#endif
+};
+
+static inline unsigned int get_dmte_irq(unsigned int chan)
+{
+ return dmte_irq_map[chan];
+}
+#endif
+
+/*
+ * We determine the correct shift size based off of the CHCR transmit size
+ * for the given channel. Since we know that it will take:
+ *
+ * info->count >> ts_shift[transmit_size]
+ *
+ * iterations to complete the transfer.
+ */
+static unsigned int ts_shift[] = TS_SHIFT;
+
+static inline unsigned int calc_xmit_shift(struct dma_channel *chan)
+{
+ u32 chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
+ int cnt = ((chcr & CHCR_TS_LOW_MASK) >> CHCR_TS_LOW_SHIFT) |
+ ((chcr & CHCR_TS_HIGH_MASK) >> CHCR_TS_HIGH_SHIFT);
+
+ return ts_shift[cnt];
+}
+
+/*
+ * The transfer end interrupt must read the chcr register to end the
+ * hardware interrupt active condition.
+ * Besides that it needs to waken any waiting process, which should handle
+ * setting up the next transfer.
+ */
+static irqreturn_t dma_tei(int irq, void *dev_id)
+{
+ struct dma_channel *chan = dev_id;
+ u32 chcr;
+
+ chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
+
+ if (!(chcr & CHCR_TE))
+ return IRQ_NONE;
+
+ chcr &= ~(CHCR_IE | CHCR_DE);
+ __raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
+
+ wake_up(&chan->wait_queue);
+
+ return IRQ_HANDLED;
+}
+
+static int sh_dmac_request_dma(struct dma_channel *chan)
+{
+ if (unlikely(!(chan->flags & DMA_TEI_CAPABLE)))
+ return 0;
+
+ return request_irq(get_dmte_irq(chan->chan), dma_tei, IRQF_SHARED,
+ chan->dev_id, chan);
+}
+
+static void sh_dmac_free_dma(struct dma_channel *chan)
+{
+ free_irq(get_dmte_irq(chan->chan), chan);
+}
+
+static int
+sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
+{
+ if (!chcr)
+ chcr = RS_DUAL | CHCR_IE;
+
+ if (chcr & CHCR_IE) {
+ chcr &= ~CHCR_IE;
+ chan->flags |= DMA_TEI_CAPABLE;
+ } else {
+ chan->flags &= ~DMA_TEI_CAPABLE;
+ }
+
+ __raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
+
+ chan->flags |= DMA_CONFIGURED;
+ return 0;
+}
+
+static void sh_dmac_enable_dma(struct dma_channel *chan)
+{
+ int irq;
+ u32 chcr;
+
+ chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
+ chcr |= CHCR_DE;
+
+ if (chan->flags & DMA_TEI_CAPABLE)
+ chcr |= CHCR_IE;
+
+ __raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
+
+ if (chan->flags & DMA_TEI_CAPABLE) {
+ irq = get_dmte_irq(chan->chan);
+ enable_irq(irq);
+ }
+}
+
+static void sh_dmac_disable_dma(struct dma_channel *chan)
+{
+ int irq;
+ u32 chcr;
+
+ if (chan->flags & DMA_TEI_CAPABLE) {
+ irq = get_dmte_irq(chan->chan);
+ disable_irq(irq);
+ }
+
+ chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
+ chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE);
+ __raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
+}
+
+static int sh_dmac_xfer_dma(struct dma_channel *chan)
+{
+ /*
+ * If we haven't pre-configured the channel with special flags, use
+ * the defaults.
+ */
+ if (unlikely(!(chan->flags & DMA_CONFIGURED)))
+ sh_dmac_configure_channel(chan, 0);
+
+ sh_dmac_disable_dma(chan);
+
+ /*
+ * Single-address mode usage note!
+ *
+ * It's important that we don't accidentally write any value to SAR/DAR
+ * (this includes 0) that hasn't been directly specified by the user if
+ * we're in single-address mode.
+ *
+ * In this case, only one address can be defined, anything else will
+ * result in a DMA address error interrupt (at least on the SH-4),
+ * which will subsequently halt the transfer.
+ *
+ * Channel 2 on the Dreamcast is a special case, as this is used for
+ * cascading to the PVR2 DMAC. In this case, we still need to write
+ * SAR and DAR, regardless of value, in order for cascading to work.
+ */
+ if (chan->sar || (mach_is_dreamcast() &&
+ chan->chan == PVR2_CASCADE_CHAN))
+ __raw_writel(chan->sar, (dma_base_addr(chan->chan) + SAR));
+ if (chan->dar || (mach_is_dreamcast() &&
+ chan->chan == PVR2_CASCADE_CHAN))
+ __raw_writel(chan->dar, (dma_base_addr(chan->chan) + DAR));
+
+ __raw_writel(chan->count >> calc_xmit_shift(chan),
+ (dma_base_addr(chan->chan) + TCR));
+
+ sh_dmac_enable_dma(chan);
+
+ return 0;
+}
+
+static int sh_dmac_get_dma_residue(struct dma_channel *chan)
+{
+ if (!(__raw_readl(dma_base_addr(chan->chan) + CHCR) & CHCR_DE))
+ return 0;
+
+ return __raw_readl(dma_base_addr(chan->chan) + TCR)
+ << calc_xmit_shift(chan);
+}
+
+/*
+ * DMAOR handling
+ */
+#if defined(CONFIG_CPU_SUBTYPE_SH7723) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7724) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7785)
+#define NR_DMAOR 2
+#else
+#define NR_DMAOR 1
+#endif
+
+#define dmaor_read_reg(n) __raw_readw(dma_find_base((n) * \
+ SH_DMAC_NR_MD_CH) + DMAOR)
+#define dmaor_write_reg(n, data) __raw_writew(data, \
+ dma_find_base((n) * \
+ SH_DMAC_NR_MD_CH) + DMAOR)
+
+static inline int dmaor_reset(int no)
+{
+ unsigned long dmaor = dmaor_read_reg(no);
+
+ /* Try to clear the error flags first, incase they are set */
+ dmaor &= ~(DMAOR_NMIF | DMAOR_AE);
+ dmaor_write_reg(no, dmaor);
+
+ dmaor |= DMAOR_INIT;
+ dmaor_write_reg(no, dmaor);
+
+ /* See if we got an error again */
+ if ((dmaor_read_reg(no) & (DMAOR_AE | DMAOR_NMIF))) {
+ printk(KERN_ERR "dma-sh: Can't initialize DMAOR.\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * DMAE handling
+ */
+#ifdef CONFIG_CPU_SH4
+
+#if defined(DMAE1_IRQ)
+#define NR_DMAE 2
+#else
+#define NR_DMAE 1
+#endif
+
+static const char *dmae_name[] = {
+ "DMAC Address Error0",
+ "DMAC Address Error1"
+};
+
+#ifdef CONFIG_SH_DMA_IRQ_MULTI
+static inline unsigned int get_dma_error_irq(int n)
+{
+ return get_dmte_irq(n * 6);
+}
+#else
+
+static unsigned int dmae_irq_map[] = {
+ DMAE0_IRQ,
+
+#ifdef DMAE1_IRQ
+ DMAE1_IRQ,
+#endif
+};
+
+static inline unsigned int get_dma_error_irq(int n)
+{
+ return dmae_irq_map[n];
+}
+#endif
+
+static irqreturn_t dma_err(int irq, void *dummy)
+{
+ int i;
+
+ for (i = 0; i < NR_DMAOR; i++)
+ dmaor_reset(i);
+
+ disable_irq(irq);
+
+ return IRQ_HANDLED;
+}
+
+static int dmae_irq_init(void)
+{
+ int n;
+
+ for (n = 0; n < NR_DMAE; n++) {
+ int i = request_irq(get_dma_error_irq(n), dma_err,
+ IRQF_SHARED, dmae_name[n], (void *)dmae_name[n]);
+ if (unlikely(i < 0)) {
+ printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]);
+ return i;
+ }
+ }
+
+ return 0;
+}
+
+static void dmae_irq_free(void)
+{
+ int n;
+
+ for (n = 0; n < NR_DMAE; n++)
+ free_irq(get_dma_error_irq(n), NULL);
+}
+#else
+static inline int dmae_irq_init(void)
+{
+ return 0;
+}
+
+static void dmae_irq_free(void)
+{
+}
+#endif
+
+static struct dma_ops sh_dmac_ops = {
+ .request = sh_dmac_request_dma,
+ .free = sh_dmac_free_dma,
+ .get_residue = sh_dmac_get_dma_residue,
+ .xfer = sh_dmac_xfer_dma,
+ .configure = sh_dmac_configure_channel,
+};
+
+static struct dma_info sh_dmac_info = {
+ .name = "sh_dmac",
+ .nr_channels = CONFIG_NR_ONCHIP_DMA_CHANNELS,
+ .ops = &sh_dmac_ops,
+ .flags = DMAC_CHANNELS_TEI_CAPABLE,
+};
+
+static int __init sh_dmac_init(void)
+{
+ struct dma_info *info = &sh_dmac_info;
+ int i, rc;
+
+ /*
+ * Initialize DMAE, for parts that support it.
+ */
+ rc = dmae_irq_init();
+ if (unlikely(rc != 0))
+ return rc;
+
+ /*
+ * Initialize DMAOR, and clean up any error flags that may have
+ * been set.
+ */
+ for (i = 0; i < NR_DMAOR; i++) {
+ rc = dmaor_reset(i);
+ if (unlikely(rc != 0))
+ return rc;
+ }
+
+ return register_dmac(info);
+}
+
+static void __exit sh_dmac_exit(void)
+{
+ dmae_irq_free();
+ unregister_dmac(&sh_dmac_info);
+}
+
+subsys_initcall(sh_dmac_init);
+module_exit(sh_dmac_exit);
+
+MODULE_AUTHOR("Takashi YOSHII, Paul Mundt, Andriy Skulysh");
+MODULE_DESCRIPTION("SuperH On-Chip DMAC Support");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
new file mode 100644
index 0000000000..431bc18f0a
--- /dev/null
+++ b/arch/sh/drivers/dma/dma-sysfs.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/sh/drivers/dma/dma-sysfs.c
+ *
+ * sysfs interface for SH DMA API
+ *
+ * Copyright (C) 2004 - 2006 Paul Mundt
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/stat.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <asm/dma.h>
+
+static struct bus_type dma_subsys = {
+ .name = "dma",
+ .dev_name = "dma",
+};
+
+static ssize_t dma_show_devices(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ ssize_t len = 0;
+ int i;
+
+ for (i = 0; i < 16; i++) {
+ struct dma_info *info = get_dma_info(i);
+ struct dma_channel *channel = get_dma_channel(i);
+
+ if (unlikely(!info) || !channel)
+ continue;
+
+ len += sprintf(buf + len, "%2d: %14s %s\n",
+ channel->chan, info->name,
+ channel->dev_id);
+ }
+
+ return len;
+}
+
+static DEVICE_ATTR(devices, S_IRUGO, dma_show_devices, NULL);
+
+static int __init dma_subsys_init(void)
+{
+ struct device *dev_root;
+ int ret;
+
+ ret = subsys_system_register(&dma_subsys, NULL);
+ if (unlikely(ret))
+ return ret;
+
+ dev_root = bus_get_dev_root(&dma_subsys);
+ if (dev_root) {
+ ret = device_create_file(dev_root, &dev_attr_devices);
+ put_device(dev_root);
+ }
+ return ret;
+}
+postcore_initcall(dma_subsys_init);
+
+static ssize_t dma_show_dev_id(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dma_channel *channel = to_dma_channel(dev);
+ return sprintf(buf, "%s\n", channel->dev_id);
+}
+
+static ssize_t dma_store_dev_id(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct dma_channel *channel = to_dma_channel(dev);
+ strcpy(channel->dev_id, buf);
+ return count;
+}
+
+static DEVICE_ATTR(dev_id, S_IRUGO | S_IWUSR, dma_show_dev_id, dma_store_dev_id);
+
+static ssize_t dma_store_config(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct dma_channel *channel = to_dma_channel(dev);
+ unsigned long config;
+
+ config = simple_strtoul(buf, NULL, 0);
+ dma_configure_channel(channel->vchan, config);
+
+ return count;
+}
+
+static DEVICE_ATTR(config, S_IWUSR, NULL, dma_store_config);
+
+static ssize_t dma_show_mode(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dma_channel *channel = to_dma_channel(dev);
+ return sprintf(buf, "0x%08x\n", channel->mode);
+}
+
+static ssize_t dma_store_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct dma_channel *channel = to_dma_channel(dev);
+ channel->mode = simple_strtoul(buf, NULL, 0);
+ return count;
+}
+
+static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, dma_show_mode, dma_store_mode);
+
+#define dma_ro_attr(field, fmt) \
+static ssize_t dma_show_##field(struct device *dev, \
+ struct device_attribute *attr, char *buf)\
+{ \
+ struct dma_channel *channel = to_dma_channel(dev); \
+ return sprintf(buf, fmt, channel->field); \
+} \
+static DEVICE_ATTR(field, S_IRUGO, dma_show_##field, NULL);
+
+dma_ro_attr(count, "0x%08x\n");
+dma_ro_attr(flags, "0x%08lx\n");
+
+int dma_create_sysfs_files(struct dma_channel *chan, struct dma_info *info)
+{
+ struct device *dev = &chan->dev;
+ char name[16];
+ int ret;
+
+ dev->id = chan->vchan;
+ dev->bus = &dma_subsys;
+
+ ret = device_register(dev);
+ if (ret)
+ return ret;
+
+ ret |= device_create_file(dev, &dev_attr_dev_id);
+ ret |= device_create_file(dev, &dev_attr_count);
+ ret |= device_create_file(dev, &dev_attr_mode);
+ ret |= device_create_file(dev, &dev_attr_flags);
+ ret |= device_create_file(dev, &dev_attr_config);
+
+ if (unlikely(ret)) {
+ dev_err(&info->pdev->dev, "Failed creating attrs\n");
+ return ret;
+ }
+
+ snprintf(name, sizeof(name), "dma%d", chan->chan);
+ return sysfs_create_link(&info->pdev->dev.kobj, &dev->kobj, name);
+}
+
+void dma_remove_sysfs_files(struct dma_channel *chan, struct dma_info *info)
+{
+ struct device *dev = &chan->dev;
+ char name[16];
+
+ device_remove_file(dev, &dev_attr_dev_id);
+ device_remove_file(dev, &dev_attr_count);
+ device_remove_file(dev, &dev_attr_mode);
+ device_remove_file(dev, &dev_attr_flags);
+ device_remove_file(dev, &dev_attr_config);
+
+ snprintf(name, sizeof(name), "dma%d", chan->chan);
+ sysfs_remove_link(&info->pdev->dev.kobj, name);
+
+ device_unregister(dev);
+}
diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c
new file mode 100644
index 0000000000..5b2c1fd254
--- /dev/null
+++ b/arch/sh/drivers/dma/dmabrg.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SH7760 DMABRG IRQ handling
+ *
+ * (c) 2007 MSC Vertriebsges.m.b.H, Manuel Lauss <mlau@msc-ge.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <asm/dma.h>
+#include <asm/dmabrg.h>
+#include <asm/io.h>
+
+/*
+ * The DMABRG is a special DMA unit within the SH7760. It does transfers
+ * from USB-SRAM/Audio units to main memory (and also the LCDC; but that
+ * part is sensibly placed in the LCDC registers and requires no irqs)
+ * It has 3 IRQ lines which trigger 10 events, and works independently
+ * from the traditional SH DMAC (although it blocks usage of DMAC 0)
+ *
+ * BRGIRQID | component | dir | meaning | source
+ * -----------------------------------------------------
+ * 0 | USB-DMA | ... | xfer done | DMABRGI1
+ * 1 | USB-UAE | ... | USB addr err.| DMABRGI0
+ * 2 | HAC0/SSI0 | play| all done | DMABRGI1
+ * 3 | HAC0/SSI0 | play| half done | DMABRGI2
+ * 4 | HAC0/SSI0 | rec | all done | DMABRGI1
+ * 5 | HAC0/SSI0 | rec | half done | DMABRGI2
+ * 6 | HAC1/SSI1 | play| all done | DMABRGI1
+ * 7 | HAC1/SSI1 | play| half done | DMABRGI2
+ * 8 | HAC1/SSI1 | rec | all done | DMABRGI1
+ * 9 | HAC1/SSI1 | rec | half done | DMABRGI2
+ *
+ * all can be enabled/disabled in the DMABRGCR register,
+ * as well as checked if they occurred.
+ *
+ * DMABRGI0 services USB DMA Address errors, but it still must be
+ * enabled/acked in the DMABRGCR register. USB-DMA complete indicator
+ * is grouped together with the audio buffer end indicators, too bad...
+ *
+ * DMABRGCR: Bits 31-24: audio-dma ENABLE flags,
+ * Bits 23-16: audio-dma STATUS flags,
+ * Bits 9-8: USB error/xfer ENABLE,
+ * Bits 1-0: USB error/xfer STATUS.
+ * Ack an IRQ by writing 0 to the STATUS flag.
+ * Mask IRQ by writing 0 to ENABLE flag.
+ *
+ * Usage is almost like with any other IRQ:
+ * dmabrg_request_irq(BRGIRQID, handler, data)
+ * dmabrg_free_irq(BRGIRQID)
+ *
+ * handler prototype: void brgirqhandler(void *data)
+ */
+
+#define DMARSRA 0xfe090000
+#define DMAOR 0xffa00040
+#define DMACHCR0 0xffa0000c
+#define DMABRGCR 0xfe3c0000
+
+#define DMAOR_BRG 0x0000c000
+#define DMAOR_DMEN 0x00000001
+
+#define DMABRGI0 68
+#define DMABRGI1 69
+#define DMABRGI2 70
+
+struct dmabrg_handler {
+ void (*handler)(void *);
+ void *data;
+} *dmabrg_handlers;
+
+static inline void dmabrg_call_handler(int i)
+{
+ dmabrg_handlers[i].handler(dmabrg_handlers[i].data);
+}
+
+/*
+ * main DMABRG irq handler. It acks irqs and then
+ * handles every set and unmasked bit sequentially.
+ * No locking and no validity checks; it should be
+ * as fast as possible (audio!)
+ */
+static irqreturn_t dmabrg_irq(int irq, void *data)
+{
+ unsigned long dcr;
+ unsigned int i;
+
+ dcr = __raw_readl(DMABRGCR);
+ __raw_writel(dcr & ~0x00ff0003, DMABRGCR); /* ack all */
+ dcr &= dcr >> 8; /* ignore masked */
+
+ /* USB stuff, get it out of the way first */
+ if (dcr & 1)
+ dmabrg_call_handler(DMABRGIRQ_USBDMA);
+ if (dcr & 2)
+ dmabrg_call_handler(DMABRGIRQ_USBDMAERR);
+
+ /* Audio */
+ dcr >>= 16;
+ while (dcr) {
+ i = __ffs(dcr);
+ dcr &= dcr - 1;
+ dmabrg_call_handler(i + DMABRGIRQ_A0TXF);
+ }
+ return IRQ_HANDLED;
+}
+
+static void dmabrg_disable_irq(unsigned int dmairq)
+{
+ unsigned long dcr;
+ dcr = __raw_readl(DMABRGCR);
+ dcr &= ~(1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
+ __raw_writel(dcr, DMABRGCR);
+}
+
+static void dmabrg_enable_irq(unsigned int dmairq)
+{
+ unsigned long dcr;
+ dcr = __raw_readl(DMABRGCR);
+ dcr |= (1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
+ __raw_writel(dcr, DMABRGCR);
+}
+
+int dmabrg_request_irq(unsigned int dmairq, void(*handler)(void*),
+ void *data)
+{
+ if ((dmairq > 9) || !handler)
+ return -ENOENT;
+ if (dmabrg_handlers[dmairq].handler)
+ return -EBUSY;
+
+ dmabrg_handlers[dmairq].handler = handler;
+ dmabrg_handlers[dmairq].data = data;
+
+ dmabrg_enable_irq(dmairq);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dmabrg_request_irq);
+
+void dmabrg_free_irq(unsigned int dmairq)
+{
+ if (likely(dmairq < 10)) {
+ dmabrg_disable_irq(dmairq);
+ dmabrg_handlers[dmairq].handler = NULL;
+ dmabrg_handlers[dmairq].data = NULL;
+ }
+}
+EXPORT_SYMBOL_GPL(dmabrg_free_irq);
+
+static int __init dmabrg_init(void)
+{
+ unsigned long or;
+ int ret;
+
+ dmabrg_handlers = kcalloc(10, sizeof(struct dmabrg_handler),
+ GFP_KERNEL);
+ if (!dmabrg_handlers)
+ return -ENOMEM;
+
+#ifdef CONFIG_SH_DMA
+ /* request DMAC channel 0 before anyone else can get it */
+ ret = request_dma(0, "DMAC 0 (DMABRG)");
+ if (ret < 0)
+ printk(KERN_INFO "DMABRG: DMAC ch0 not reserved!\n");
+#endif
+
+ __raw_writel(0, DMABRGCR);
+ __raw_writel(0, DMACHCR0);
+ __raw_writel(0x94000000, DMARSRA); /* enable DMABRG in DMAC 0 */
+
+ /* enable DMABRG mode, enable the DMAC */
+ or = __raw_readl(DMAOR);
+ __raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
+
+ ret = request_irq(DMABRGI0, dmabrg_irq, 0,
+ "DMABRG USB address error", NULL);
+ if (ret)
+ goto out0;
+
+ ret = request_irq(DMABRGI1, dmabrg_irq, 0,
+ "DMABRG Transfer End", NULL);
+ if (ret)
+ goto out1;
+
+ ret = request_irq(DMABRGI2, dmabrg_irq, 0,
+ "DMABRG Transfer Half", NULL);
+ if (ret == 0)
+ return ret;
+
+ free_irq(DMABRGI1, NULL);
+out1: free_irq(DMABRGI0, NULL);
+out0: kfree(dmabrg_handlers);
+ return ret;
+}
+subsys_initcall(dmabrg_init);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 05:53:47 +0000