summaryrefslogtreecommitdiffstats
path: root/arch/sparc/kernel/sun4m_irq.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sparc/kernel/sun4m_irq.c')
-rw-r--r--arch/sparc/kernel/sun4m_irq.c478
1 files changed, 478 insertions, 0 deletions
diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c
new file mode 100644
index 0000000000..1079638986
--- /dev/null
+++ b/arch/sparc/kernel/sun4m_irq.c
@@ -0,0 +1,478 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * sun4m irq support
+ *
+ * djhr: Hacked out of irq.c into a CPU dependent version.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
+ * Copyright (C) 1995 Pete A. Zaitcev (zaitcev@yahoo.com)
+ * Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk)
+ */
+
+#include <linux/slab.h>
+#include <linux/sched/debug.h>
+#include <linux/pgtable.h>
+
+#include <asm/timer.h>
+#include <asm/traps.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/cacheflush.h>
+
+#include "irq.h"
+#include "kernel.h"
+
+/* Sample sun4m IRQ layout:
+ *
+ * 0x22 - Power
+ * 0x24 - ESP SCSI
+ * 0x26 - Lance ethernet
+ * 0x2b - Floppy
+ * 0x2c - Zilog uart
+ * 0x32 - SBUS level 0
+ * 0x33 - Parallel port, SBUS level 1
+ * 0x35 - SBUS level 2
+ * 0x37 - SBUS level 3
+ * 0x39 - Audio, Graphics card, SBUS level 4
+ * 0x3b - SBUS level 5
+ * 0x3d - SBUS level 6
+ *
+ * Each interrupt source has a mask bit in the interrupt registers.
+ * When the mask bit is set, this blocks interrupt deliver. So you
+ * clear the bit to enable the interrupt.
+ *
+ * Interrupts numbered less than 0x10 are software triggered interrupts
+ * and unused by Linux.
+ *
+ * Interrupt level assignment on sun4m:
+ *
+ * level source
+ * ------------------------------------------------------------
+ * 1 softint-1
+ * 2 softint-2, VME/SBUS level 1
+ * 3 softint-3, VME/SBUS level 2
+ * 4 softint-4, onboard SCSI
+ * 5 softint-5, VME/SBUS level 3
+ * 6 softint-6, onboard ETHERNET
+ * 7 softint-7, VME/SBUS level 4
+ * 8 softint-8, onboard VIDEO
+ * 9 softint-9, VME/SBUS level 5, Module Interrupt
+ * 10 softint-10, system counter/timer
+ * 11 softint-11, VME/SBUS level 6, Floppy
+ * 12 softint-12, Keyboard/Mouse, Serial
+ * 13 softint-13, VME/SBUS level 7, ISDN Audio
+ * 14 softint-14, per-processor counter/timer
+ * 15 softint-15, Asynchronous Errors (broadcast)
+ *
+ * Each interrupt source is masked distinctly in the sun4m interrupt
+ * registers. The PIL level alone is therefore ambiguous, since multiple
+ * interrupt sources map to a single PIL.
+ *
+ * This ambiguity is resolved in the 'intr' property for device nodes
+ * in the OF device tree. Each 'intr' property entry is composed of
+ * two 32-bit words. The first word is the IRQ priority value, which
+ * is what we're intersted in. The second word is the IRQ vector, which
+ * is unused.
+ *
+ * The low 4 bits of the IRQ priority indicate the PIL, and the upper
+ * 4 bits indicate onboard vs. SBUS leveled vs. VME leveled. 0x20
+ * means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled.
+ *
+ * For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI
+ * whereas a value of 0x33 is SBUS level 2. Here are some sample
+ * 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and
+ * Tadpole S3 GX systems.
+ *
+ * esp: 0x24 onboard ESP SCSI
+ * le: 0x26 onboard Lance ETHERNET
+ * p9100: 0x32 SBUS level 1 P9100 video
+ * bpp: 0x33 SBUS level 2 BPP parallel port device
+ * DBRI: 0x39 SBUS level 5 DBRI ISDN audio
+ * SUNW,leo: 0x39 SBUS level 5 LEO video
+ * pcmcia: 0x3b SBUS level 6 PCMCIA controller
+ * uctrl: 0x3b SBUS level 6 UCTRL device
+ * modem: 0x3d SBUS level 7 MODEM
+ * zs: 0x2c onboard keyboard/mouse/serial
+ * floppy: 0x2b onboard Floppy
+ * power: 0x22 onboard power device (XXX unknown mask bit XXX)
+ */
+
+
+/* Code in entry.S needs to get at these register mappings. */
+struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS];
+struct sun4m_irq_global __iomem *sun4m_irq_global;
+
+struct sun4m_handler_data {
+ bool percpu;
+ long mask;
+};
+
+/* Dave Redman (djhr@tadpole.co.uk)
+ * The sun4m interrupt registers.
+ */
+#define SUN4M_INT_ENABLE 0x80000000
+#define SUN4M_INT_E14 0x00000080
+#define SUN4M_INT_E10 0x00080000
+
+#define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */
+#define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */
+#define SUN4M_INT_M2S_WRITE_ERR 0x20000000 /* write buffer error */
+#define SUN4M_INT_ECC_ERR 0x10000000 /* ecc memory error */
+#define SUN4M_INT_VME_ERR 0x08000000 /* vme async error */
+#define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */
+#define SUN4M_INT_MODULE 0x00200000 /* module interrupt */
+#define SUN4M_INT_VIDEO 0x00100000 /* onboard video */
+#define SUN4M_INT_REALTIME 0x00080000 /* system timer */
+#define SUN4M_INT_SCSI 0x00040000 /* onboard scsi */
+#define SUN4M_INT_AUDIO 0x00020000 /* audio/isdn */
+#define SUN4M_INT_ETHERNET 0x00010000 /* onboard ethernet */
+#define SUN4M_INT_SERIAL 0x00008000 /* serial ports */
+#define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */
+#define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */
+#define SUN4M_INT_VMEBITS 0x0000007F /* vme int bits */
+
+#define SUN4M_INT_ERROR (SUN4M_INT_MODULE_ERR | \
+ SUN4M_INT_M2S_WRITE_ERR | \
+ SUN4M_INT_ECC_ERR | \
+ SUN4M_INT_VME_ERR)
+
+#define SUN4M_INT_SBUS(x) (1 << (x+7))
+#define SUN4M_INT_VME(x) (1 << (x))
+
+/* Interrupt levels used by OBP */
+#define OBP_INT_LEVEL_SOFT 0x10
+#define OBP_INT_LEVEL_ONBOARD 0x20
+#define OBP_INT_LEVEL_SBUS 0x30
+#define OBP_INT_LEVEL_VME 0x40
+
+#define SUN4M_TIMER_IRQ (OBP_INT_LEVEL_ONBOARD | 10)
+#define SUN4M_PROFILE_IRQ (OBP_INT_LEVEL_ONBOARD | 14)
+
+static unsigned long sun4m_imask[0x50] = {
+ /* 0x00 - SMP */
+ 0, SUN4M_SOFT_INT(1),
+ SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3),
+ SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5),
+ SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7),
+ SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9),
+ SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
+ SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
+ SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
+ /* 0x10 - soft */
+ 0, SUN4M_SOFT_INT(1),
+ SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3),
+ SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5),
+ SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7),
+ SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9),
+ SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
+ SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
+ SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
+ /* 0x20 - onboard */
+ 0, 0, 0, 0,
+ SUN4M_INT_SCSI, 0, SUN4M_INT_ETHERNET, 0,
+ SUN4M_INT_VIDEO, SUN4M_INT_MODULE,
+ SUN4M_INT_REALTIME, SUN4M_INT_FLOPPY,
+ (SUN4M_INT_SERIAL | SUN4M_INT_KBDMS),
+ SUN4M_INT_AUDIO, SUN4M_INT_E14, SUN4M_INT_MODULE_ERR,
+ /* 0x30 - sbus */
+ 0, 0, SUN4M_INT_SBUS(0), SUN4M_INT_SBUS(1),
+ 0, SUN4M_INT_SBUS(2), 0, SUN4M_INT_SBUS(3),
+ 0, SUN4M_INT_SBUS(4), 0, SUN4M_INT_SBUS(5),
+ 0, SUN4M_INT_SBUS(6), 0, 0,
+ /* 0x40 - vme */
+ 0, 0, SUN4M_INT_VME(0), SUN4M_INT_VME(1),
+ 0, SUN4M_INT_VME(2), 0, SUN4M_INT_VME(3),
+ 0, SUN4M_INT_VME(4), 0, SUN4M_INT_VME(5),
+ 0, SUN4M_INT_VME(6), 0, 0
+};
+
+static void sun4m_mask_irq(struct irq_data *data)
+{
+ struct sun4m_handler_data *handler_data;
+ int cpu = smp_processor_id();
+
+ handler_data = irq_data_get_irq_handler_data(data);
+ if (handler_data->mask) {
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (handler_data->percpu) {
+ sbus_writel(handler_data->mask, &sun4m_irq_percpu[cpu]->set);
+ } else {
+ sbus_writel(handler_data->mask, &sun4m_irq_global->mask_set);
+ }
+ local_irq_restore(flags);
+ }
+}
+
+static void sun4m_unmask_irq(struct irq_data *data)
+{
+ struct sun4m_handler_data *handler_data;
+ int cpu = smp_processor_id();
+
+ handler_data = irq_data_get_irq_handler_data(data);
+ if (handler_data->mask) {
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (handler_data->percpu) {
+ sbus_writel(handler_data->mask, &sun4m_irq_percpu[cpu]->clear);
+ } else {
+ sbus_writel(handler_data->mask, &sun4m_irq_global->mask_clear);
+ }
+ local_irq_restore(flags);
+ }
+}
+
+static unsigned int sun4m_startup_irq(struct irq_data *data)
+{
+ irq_link(data->irq);
+ sun4m_unmask_irq(data);
+ return 0;
+}
+
+static void sun4m_shutdown_irq(struct irq_data *data)
+{
+ sun4m_mask_irq(data);
+ irq_unlink(data->irq);
+}
+
+static struct irq_chip sun4m_irq = {
+ .name = "sun4m",
+ .irq_startup = sun4m_startup_irq,
+ .irq_shutdown = sun4m_shutdown_irq,
+ .irq_mask = sun4m_mask_irq,
+ .irq_unmask = sun4m_unmask_irq,
+};
+
+
+static unsigned int sun4m_build_device_irq(struct platform_device *op,
+ unsigned int real_irq)
+{
+ struct sun4m_handler_data *handler_data;
+ unsigned int irq;
+ unsigned int pil;
+
+ if (real_irq >= OBP_INT_LEVEL_VME) {
+ prom_printf("Bogus sun4m IRQ %u\n", real_irq);
+ prom_halt();
+ }
+ pil = (real_irq & 0xf);
+ irq = irq_alloc(real_irq, pil);
+
+ if (irq == 0)
+ goto out;
+
+ handler_data = irq_get_handler_data(irq);
+ if (unlikely(handler_data))
+ goto out;
+
+ handler_data = kzalloc(sizeof(struct sun4m_handler_data), GFP_ATOMIC);
+ if (unlikely(!handler_data)) {
+ prom_printf("IRQ: kzalloc(sun4m_handler_data) failed.\n");
+ prom_halt();
+ }
+
+ handler_data->mask = sun4m_imask[real_irq];
+ handler_data->percpu = real_irq < OBP_INT_LEVEL_ONBOARD;
+ irq_set_chip_and_handler_name(irq, &sun4m_irq,
+ handle_level_irq, "level");
+ irq_set_handler_data(irq, handler_data);
+
+out:
+ return irq;
+}
+
+struct sun4m_timer_percpu {
+ u32 l14_limit;
+ u32 l14_count;
+ u32 l14_limit_noclear;
+ u32 user_timer_start_stop;
+};
+
+static struct sun4m_timer_percpu __iomem *timers_percpu[SUN4M_NCPUS];
+
+struct sun4m_timer_global {
+ u32 l10_limit;
+ u32 l10_count;
+ u32 l10_limit_noclear;
+ u32 reserved;
+ u32 timer_config;
+};
+
+static struct sun4m_timer_global __iomem *timers_global;
+
+static void sun4m_clear_clock_irq(void)
+{
+ sbus_readl(&timers_global->l10_limit);
+}
+
+void sun4m_nmi(struct pt_regs *regs)
+{
+ unsigned long afsr, afar, si;
+
+ printk(KERN_ERR "Aieee: sun4m NMI received!\n");
+ /* XXX HyperSparc hack XXX */
+ __asm__ __volatile__("mov 0x500, %%g1\n\t"
+ "lda [%%g1] 0x4, %0\n\t"
+ "mov 0x600, %%g1\n\t"
+ "lda [%%g1] 0x4, %1\n\t" :
+ "=r" (afsr), "=r" (afar));
+ printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar);
+ si = sbus_readl(&sun4m_irq_global->pending);
+ printk(KERN_ERR "si=%08lx\n", si);
+ if (si & SUN4M_INT_MODULE_ERR)
+ printk(KERN_ERR "Module async error\n");
+ if (si & SUN4M_INT_M2S_WRITE_ERR)
+ printk(KERN_ERR "MBus/SBus async error\n");
+ if (si & SUN4M_INT_ECC_ERR)
+ printk(KERN_ERR "ECC memory error\n");
+ if (si & SUN4M_INT_VME_ERR)
+ printk(KERN_ERR "VME async error\n");
+ printk(KERN_ERR "you lose buddy boy...\n");
+ show_regs(regs);
+ prom_halt();
+}
+
+void sun4m_unmask_profile_irq(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ sbus_writel(sun4m_imask[SUN4M_PROFILE_IRQ], &sun4m_irq_global->mask_clear);
+ local_irq_restore(flags);
+}
+
+void sun4m_clear_profile_irq(int cpu)
+{
+ sbus_readl(&timers_percpu[cpu]->l14_limit);
+}
+
+static void sun4m_load_profile_irq(int cpu, unsigned int limit)
+{
+ unsigned int value = limit ? timer_value(limit) : 0;
+ sbus_writel(value, &timers_percpu[cpu]->l14_limit);
+}
+
+static void __init sun4m_init_timers(void)
+{
+ struct device_node *dp = of_find_node_by_name(NULL, "counter");
+ int i, err, len, num_cpu_timers;
+ unsigned int irq;
+ const u32 *addr;
+
+ if (!dp) {
+ printk(KERN_ERR "sun4m_init_timers: No 'counter' node.\n");
+ return;
+ }
+
+ addr = of_get_property(dp, "address", &len);
+ of_node_put(dp);
+ if (!addr) {
+ printk(KERN_ERR "sun4m_init_timers: No 'address' prop.\n");
+ return;
+ }
+
+ num_cpu_timers = (len / sizeof(u32)) - 1;
+ for (i = 0; i < num_cpu_timers; i++) {
+ timers_percpu[i] = (void __iomem *)
+ (unsigned long) addr[i];
+ }
+ timers_global = (void __iomem *)
+ (unsigned long) addr[num_cpu_timers];
+
+ /* Every per-cpu timer works in timer mode */
+ sbus_writel(0x00000000, &timers_global->timer_config);
+
+#ifdef CONFIG_SMP
+ sparc_config.cs_period = SBUS_CLOCK_RATE * 2; /* 2 seconds */
+ sparc_config.features |= FEAT_L14_ONESHOT;
+#else
+ sparc_config.cs_period = SBUS_CLOCK_RATE / HZ; /* 1/HZ sec */
+ sparc_config.features |= FEAT_L10_CLOCKEVENT;
+#endif
+ sparc_config.features |= FEAT_L10_CLOCKSOURCE;
+ sbus_writel(timer_value(sparc_config.cs_period),
+ &timers_global->l10_limit);
+
+ master_l10_counter = &timers_global->l10_count;
+
+ irq = sun4m_build_device_irq(NULL, SUN4M_TIMER_IRQ);
+
+ err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL);
+ if (err) {
+ printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n",
+ err);
+ return;
+ }
+
+ for (i = 0; i < num_cpu_timers; i++)
+ sbus_writel(0, &timers_percpu[i]->l14_limit);
+ if (num_cpu_timers == 4)
+ sbus_writel(SUN4M_INT_E14, &sun4m_irq_global->mask_set);
+
+#ifdef CONFIG_SMP
+ {
+ unsigned long flags;
+ struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
+
+ /* For SMP we use the level 14 ticker, however the bootup code
+ * has copied the firmware's level 14 vector into the boot cpu's
+ * trap table, we must fix this now or we get squashed.
+ */
+ local_irq_save(flags);
+ trap_table->inst_one = lvl14_save[0];
+ trap_table->inst_two = lvl14_save[1];
+ trap_table->inst_three = lvl14_save[2];
+ trap_table->inst_four = lvl14_save[3];
+ local_ops->cache_all();
+ local_irq_restore(flags);
+ }
+#endif
+}
+
+void __init sun4m_init_IRQ(void)
+{
+ struct device_node *dp = of_find_node_by_name(NULL, "interrupt");
+ int len, i, mid, num_cpu_iregs;
+ const u32 *addr;
+
+ if (!dp) {
+ printk(KERN_ERR "sun4m_init_IRQ: No 'interrupt' node.\n");
+ return;
+ }
+
+ addr = of_get_property(dp, "address", &len);
+ of_node_put(dp);
+ if (!addr) {
+ printk(KERN_ERR "sun4m_init_IRQ: No 'address' prop.\n");
+ return;
+ }
+
+ num_cpu_iregs = (len / sizeof(u32)) - 1;
+ for (i = 0; i < num_cpu_iregs; i++) {
+ sun4m_irq_percpu[i] = (void __iomem *)
+ (unsigned long) addr[i];
+ }
+ sun4m_irq_global = (void __iomem *)
+ (unsigned long) addr[num_cpu_iregs];
+
+ local_irq_disable();
+
+ sbus_writel(~SUN4M_INT_MASKALL, &sun4m_irq_global->mask_set);
+ for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++)
+ sbus_writel(~0x17fff, &sun4m_irq_percpu[mid]->clear);
+
+ if (num_cpu_iregs == 4)
+ sbus_writel(0, &sun4m_irq_global->interrupt_target);
+
+ sparc_config.init_timers = sun4m_init_timers;
+ sparc_config.build_device_irq = sun4m_build_device_irq;
+ sparc_config.clock_rate = SBUS_CLOCK_RATE;
+ sparc_config.clear_clock_irq = sun4m_clear_clock_irq;
+ sparc_config.load_profile_irq = sun4m_load_profile_irq;
+
+
+ /* Cannot enable interrupts until OBP ticker is disabled. */
+}