diff options
Diffstat (limited to 'arch/x86/entry/calling.h')
| -rw-r--r-- | arch/x86/entry/calling.h | 115 |
1 files changed, 87 insertions, 28 deletions
diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h index 9f1d94790a..ea81770629 100644 --- a/arch/x86/entry/calling.h +++ b/arch/x86/entry/calling.h @@ -65,7 +65,7 @@ For 32-bit we have the following conventions - kernel is built with * for assembly code: */ -.macro PUSH_REGS rdx=%rdx rcx=%rcx rax=%rax save_ret=0 +.macro PUSH_REGS rdx=%rdx rcx=%rcx rax=%rax save_ret=0 unwind_hint=1 .if \save_ret pushq %rsi /* pt_regs->si */ movq 8(%rsp), %rsi /* temporarily store the return address in %rsi */ @@ -87,14 +87,17 @@ For 32-bit we have the following conventions - kernel is built with pushq %r13 /* pt_regs->r13 */ pushq %r14 /* pt_regs->r14 */ pushq %r15 /* pt_regs->r15 */ + + .if \unwind_hint UNWIND_HINT_REGS + .endif .if \save_ret pushq %rsi /* return address on top of stack */ .endif .endm -.macro CLEAR_REGS +.macro CLEAR_REGS clear_bp=1 /* * Sanitize registers of values that a speculation attack might * otherwise want to exploit. The lower registers are likely clobbered @@ -109,7 +112,9 @@ For 32-bit we have the following conventions - kernel is built with xorl %r10d, %r10d /* nospec r10 */ xorl %r11d, %r11d /* nospec r11 */ xorl %ebx, %ebx /* nospec rbx */ + .if \clear_bp xorl %ebp, %ebp /* nospec rbp */ + .endif xorl %r12d, %r12d /* nospec r12 */ xorl %r13d, %r13d /* nospec r13 */ xorl %r14d, %r14d /* nospec r14 */ @@ -117,9 +122,9 @@ For 32-bit we have the following conventions - kernel is built with .endm -.macro PUSH_AND_CLEAR_REGS rdx=%rdx rcx=%rcx rax=%rax save_ret=0 - PUSH_REGS rdx=\rdx, rcx=\rcx, rax=\rax, save_ret=\save_ret - CLEAR_REGS +.macro PUSH_AND_CLEAR_REGS rdx=%rdx rcx=%rcx rax=%rax save_ret=0 clear_bp=1 unwind_hint=1 + PUSH_REGS rdx=\rdx, rcx=\rcx, rax=\rax, save_ret=\save_ret unwind_hint=\unwind_hint + CLEAR_REGS clear_bp=\clear_bp .endm .macro POP_REGS pop_rdi=1 @@ -142,10 +147,10 @@ For 32-bit we have the following conventions - kernel is built with .endif .endm -#ifdef CONFIG_PAGE_TABLE_ISOLATION +#ifdef CONFIG_MITIGATION_PAGE_TABLE_ISOLATION /* - * PAGE_TABLE_ISOLATION PGDs are 8k. Flip bit 12 to switch between the two + * MITIGATION_PAGE_TABLE_ISOLATION PGDs are 8k. Flip bit 12 to switch between the two * halves: */ #define PTI_USER_PGTABLE_BIT PAGE_SHIFT @@ -160,7 +165,7 @@ For 32-bit we have the following conventions - kernel is built with .macro ADJUST_KERNEL_CR3 reg:req ALTERNATIVE "", "SET_NOFLUSH_BIT \reg", X86_FEATURE_PCID - /* Clear PCID and "PAGE_TABLE_ISOLATION bit", point CR3 at kernel pagetables: */ + /* Clear PCID and "MITIGATION_PAGE_TABLE_ISOLATION bit", point CR3 at kernel pagetables: */ andq $(~PTI_USER_PGTABLE_AND_PCID_MASK), \reg .endm @@ -173,7 +178,7 @@ For 32-bit we have the following conventions - kernel is built with .endm #define THIS_CPU_user_pcid_flush_mask \ - PER_CPU_VAR(cpu_tlbstate) + TLB_STATE_user_pcid_flush_mask + PER_CPU_VAR(cpu_tlbstate + TLB_STATE_user_pcid_flush_mask) .macro SWITCH_TO_USER_CR3 scratch_reg:req scratch_reg2:req mov %cr3, \scratch_reg @@ -239,17 +244,19 @@ For 32-bit we have the following conventions - kernel is built with .Ldone_\@: .endm -.macro RESTORE_CR3 scratch_reg:req save_reg:req +/* Restore CR3 from a kernel context. May restore a user CR3 value. */ +.macro PARANOID_RESTORE_CR3 scratch_reg:req save_reg:req ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI - ALTERNATIVE "jmp .Lwrcr3_\@", "", X86_FEATURE_PCID - /* - * KERNEL pages can always resume with NOFLUSH as we do - * explicit flushes. + * If CR3 contained the kernel page tables at the paranoid exception + * entry, then there is nothing to restore as CR3 is not modified while + * handling the exception. */ bt $PTI_USER_PGTABLE_BIT, \save_reg - jnc .Lnoflush_\@ + jnc .Lend_\@ + + ALTERNATIVE "jmp .Lwrcr3_\@", "", X86_FEATURE_PCID /* * Check if there's a pending flush for the user ASID we're @@ -257,25 +264,17 @@ For 32-bit we have the following conventions - kernel is built with */ movq \save_reg, \scratch_reg andq $(0x7FF), \scratch_reg - bt \scratch_reg, THIS_CPU_user_pcid_flush_mask - jnc .Lnoflush_\@ - btr \scratch_reg, THIS_CPU_user_pcid_flush_mask - jmp .Lwrcr3_\@ + jc .Lwrcr3_\@ -.Lnoflush_\@: SET_NOFLUSH_BIT \save_reg .Lwrcr3_\@: - /* - * The CR3 write could be avoided when not changing its value, - * but would require a CR3 read *and* a scratch register. - */ movq \save_reg, %cr3 .Lend_\@: .endm -#else /* CONFIG_PAGE_TABLE_ISOLATION=n: */ +#else /* CONFIG_MITIGATION_PAGE_TABLE_ISOLATION=n: */ .macro SWITCH_TO_KERNEL_CR3 scratch_reg:req .endm @@ -285,7 +284,7 @@ For 32-bit we have the following conventions - kernel is built with .endm .macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req .endm -.macro RESTORE_CR3 scratch_reg:req save_reg:req +.macro PARANOID_RESTORE_CR3 scratch_reg:req save_reg:req .endm #endif @@ -303,7 +302,7 @@ For 32-bit we have the following conventions - kernel is built with * Assumes x86_spec_ctrl_{base,current} to have SPEC_CTRL_IBRS set. */ .macro IBRS_ENTER save_reg -#ifdef CONFIG_CPU_IBRS_ENTRY +#ifdef CONFIG_MITIGATION_IBRS_ENTRY ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_KERNEL_IBRS movl $MSR_IA32_SPEC_CTRL, %ecx @@ -332,7 +331,7 @@ For 32-bit we have the following conventions - kernel is built with * regs. Must be called after the last RET. */ .macro IBRS_EXIT save_reg -#ifdef CONFIG_CPU_IBRS_ENTRY +#ifdef CONFIG_MITIGATION_IBRS_ENTRY ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_KERNEL_IBRS movl $MSR_IA32_SPEC_CTRL, %ecx @@ -426,3 +425,63 @@ For 32-bit we have the following conventions - kernel is built with .endm #endif /* CONFIG_SMP */ + +#ifdef CONFIG_X86_64 + +/* rdi: arg1 ... normal C conventions. rax is saved/restored. */ +.macro THUNK name, func +SYM_FUNC_START(\name) + pushq %rbp + movq %rsp, %rbp + + pushq %rdi + pushq %rsi + pushq %rdx + pushq %rcx + pushq %rax + pushq %r8 + pushq %r9 + pushq %r10 + pushq %r11 + + call \func + + popq %r11 + popq %r10 + popq %r9 + popq %r8 + popq %rax + popq %rcx + popq %rdx + popq %rsi + popq %rdi + popq %rbp + RET +SYM_FUNC_END(\name) + _ASM_NOKPROBE(\name) +.endm + +#else /* CONFIG_X86_32 */ + +/* put return address in eax (arg1) */ +.macro THUNK name, func, put_ret_addr_in_eax=0 +SYM_CODE_START_NOALIGN(\name) + pushl %eax + pushl %ecx + pushl %edx + + .if \put_ret_addr_in_eax + /* Place EIP in the arg1 */ + movl 3*4(%esp), %eax + .endif + + call \func + popl %edx + popl %ecx + popl %eax + RET + _ASM_NOKPROBE(\name) +SYM_CODE_END(\name) + .endm + +#endif |