diff options
Diffstat (limited to 'arch/x86/entry/entry_64_compat.S')
-rw-r--r-- | arch/x86/entry/entry_64_compat.S | 278 |
1 files changed, 278 insertions, 0 deletions
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S new file mode 100644 index 0000000000..4e88f84387 --- /dev/null +++ b/arch/x86/entry/entry_64_compat.S @@ -0,0 +1,278 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Compatibility mode system call entry point for x86-64. + * + * Copyright 2000-2002 Andi Kleen, SuSE Labs. + */ +#include <asm/asm-offsets.h> +#include <asm/current.h> +#include <asm/errno.h> +#include <asm/ia32_unistd.h> +#include <asm/thread_info.h> +#include <asm/segment.h> +#include <asm/irqflags.h> +#include <asm/asm.h> +#include <asm/smap.h> +#include <asm/nospec-branch.h> +#include <linux/linkage.h> +#include <linux/err.h> + +#include "calling.h" + + .section .entry.text, "ax" + +/* + * 32-bit SYSENTER entry. + * + * 32-bit system calls through the vDSO's __kernel_vsyscall enter here + * on 64-bit kernels running on Intel CPUs. + * + * The SYSENTER instruction, in principle, should *only* occur in the + * vDSO. In practice, a small number of Android devices were shipped + * with a copy of Bionic that inlined a SYSENTER instruction. This + * never happened in any of Google's Bionic versions -- it only happened + * in a narrow range of Intel-provided versions. + * + * SYSENTER loads SS, RSP, CS, and RIP from previously programmed MSRs. + * IF and VM in RFLAGS are cleared (IOW: interrupts are off). + * SYSENTER does not save anything on the stack, + * and does not save old RIP (!!!), RSP, or RFLAGS. + * + * Arguments: + * eax system call number + * ebx arg1 + * ecx arg2 + * edx arg3 + * esi arg4 + * edi arg5 + * ebp user stack + * 0(%ebp) arg6 + */ +SYM_CODE_START(entry_SYSENTER_compat) + UNWIND_HINT_ENTRY + ENDBR + /* Interrupts are off on entry. */ + swapgs + + pushq %rax + SWITCH_TO_KERNEL_CR3 scratch_reg=%rax + popq %rax + + movq PER_CPU_VAR(pcpu_hot + X86_top_of_stack), %rsp + + /* Construct struct pt_regs on stack */ + pushq $__USER_DS /* pt_regs->ss */ + pushq $0 /* pt_regs->sp = 0 (placeholder) */ + + /* + * Push flags. This is nasty. First, interrupts are currently + * off, but we need pt_regs->flags to have IF set. Second, if TS + * was set in usermode, it's still set, and we're singlestepping + * through this code. do_SYSENTER_32() will fix up IF. + */ + pushfq /* pt_regs->flags (except IF = 0) */ + pushq $__USER32_CS /* pt_regs->cs */ + pushq $0 /* pt_regs->ip = 0 (placeholder) */ +SYM_INNER_LABEL(entry_SYSENTER_compat_after_hwframe, SYM_L_GLOBAL) + + /* + * User tracing code (ptrace or signal handlers) might assume that + * the saved RAX contains a 32-bit number when we're invoking a 32-bit + * syscall. Just in case the high bits are nonzero, zero-extend + * the syscall number. (This could almost certainly be deleted + * with no ill effects.) + */ + movl %eax, %eax + + pushq %rax /* pt_regs->orig_ax */ + PUSH_AND_CLEAR_REGS rax=$-ENOSYS + UNWIND_HINT_REGS + + cld + + IBRS_ENTER + UNTRAIN_RET + + /* + * SYSENTER doesn't filter flags, so we need to clear NT and AC + * ourselves. To save a few cycles, we can check whether + * either was set instead of doing an unconditional popfq. + * This needs to happen before enabling interrupts so that + * we don't get preempted with NT set. + * + * If TF is set, we will single-step all the way to here -- do_debug + * will ignore all the traps. (Yes, this is slow, but so is + * single-stepping in general. This allows us to avoid having + * a more complicated code to handle the case where a user program + * forces us to single-step through the SYSENTER entry code.) + * + * NB.: .Lsysenter_fix_flags is a label with the code under it moved + * out-of-line as an optimization: NT is unlikely to be set in the + * majority of the cases and instead of polluting the I$ unnecessarily, + * we're keeping that code behind a branch which will predict as + * not-taken and therefore its instructions won't be fetched. + */ + testl $X86_EFLAGS_NT|X86_EFLAGS_AC|X86_EFLAGS_TF, EFLAGS(%rsp) + jnz .Lsysenter_fix_flags +.Lsysenter_flags_fixed: + + movq %rsp, %rdi + call do_SYSENTER_32 + /* XEN PV guests always use IRET path */ + ALTERNATIVE "testl %eax, %eax; jz swapgs_restore_regs_and_return_to_usermode", \ + "jmp swapgs_restore_regs_and_return_to_usermode", X86_FEATURE_XENPV + jmp sysret32_from_system_call + +.Lsysenter_fix_flags: + pushq $X86_EFLAGS_FIXED + popfq + jmp .Lsysenter_flags_fixed +SYM_INNER_LABEL(__end_entry_SYSENTER_compat, SYM_L_GLOBAL) +SYM_CODE_END(entry_SYSENTER_compat) + +/* + * 32-bit SYSCALL entry. + * + * 32-bit system calls through the vDSO's __kernel_vsyscall enter here + * on 64-bit kernels running on AMD CPUs. + * + * The SYSCALL instruction, in principle, should *only* occur in the + * vDSO. In practice, it appears that this really is the case. + * As evidence: + * + * - The calling convention for SYSCALL has changed several times without + * anyone noticing. + * + * - Prior to the in-kernel X86_BUG_SYSRET_SS_ATTRS fixup, anything + * user task that did SYSCALL without immediately reloading SS + * would randomly crash. + * + * - Most programmers do not directly target AMD CPUs, and the 32-bit + * SYSCALL instruction does not exist on Intel CPUs. Even on AMD + * CPUs, Linux disables the SYSCALL instruction on 32-bit kernels + * because the SYSCALL instruction in legacy/native 32-bit mode (as + * opposed to compat mode) is sufficiently poorly designed as to be + * essentially unusable. + * + * 32-bit SYSCALL saves RIP to RCX, clears RFLAGS.RF, then saves + * RFLAGS to R11, then loads new SS, CS, and RIP from previously + * programmed MSRs. RFLAGS gets masked by a value from another MSR + * (so CLD and CLAC are not needed). SYSCALL does not save anything on + * the stack and does not change RSP. + * + * Note: RFLAGS saving+masking-with-MSR happens only in Long mode + * (in legacy 32-bit mode, IF, RF and VM bits are cleared and that's it). + * Don't get confused: RFLAGS saving+masking depends on Long Mode Active bit + * (EFER.LMA=1), NOT on bitness of userspace where SYSCALL executes + * or target CS descriptor's L bit (SYSCALL does not read segment descriptors). + * + * Arguments: + * eax system call number + * ecx return address + * ebx arg1 + * ebp arg2 (note: not saved in the stack frame, should not be touched) + * edx arg3 + * esi arg4 + * edi arg5 + * esp user stack + * 0(%esp) arg6 + */ +SYM_CODE_START(entry_SYSCALL_compat) + UNWIND_HINT_ENTRY + ENDBR + /* Interrupts are off on entry. */ + swapgs + + /* Stash user ESP */ + movl %esp, %r8d + + /* Use %rsp as scratch reg. User ESP is stashed in r8 */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp + + /* Switch to the kernel stack */ + movq PER_CPU_VAR(pcpu_hot + X86_top_of_stack), %rsp + +SYM_INNER_LABEL(entry_SYSCALL_compat_safe_stack, SYM_L_GLOBAL) + ANNOTATE_NOENDBR + + /* Construct struct pt_regs on stack */ + pushq $__USER_DS /* pt_regs->ss */ + pushq %r8 /* pt_regs->sp */ + pushq %r11 /* pt_regs->flags */ + pushq $__USER32_CS /* pt_regs->cs */ + pushq %rcx /* pt_regs->ip */ +SYM_INNER_LABEL(entry_SYSCALL_compat_after_hwframe, SYM_L_GLOBAL) + movl %eax, %eax /* discard orig_ax high bits */ + pushq %rax /* pt_regs->orig_ax */ + PUSH_AND_CLEAR_REGS rcx=%rbp rax=$-ENOSYS + UNWIND_HINT_REGS + + IBRS_ENTER + UNTRAIN_RET + + movq %rsp, %rdi + call do_fast_syscall_32 + /* XEN PV guests always use IRET path */ + ALTERNATIVE "testl %eax, %eax; jz swapgs_restore_regs_and_return_to_usermode", \ + "jmp swapgs_restore_regs_and_return_to_usermode", X86_FEATURE_XENPV + + /* Opportunistic SYSRET */ +sysret32_from_system_call: + /* + * We are not going to return to userspace from the trampoline + * stack. So let's erase the thread stack right now. + */ + STACKLEAK_ERASE + + IBRS_EXIT + + movq RBX(%rsp), %rbx /* pt_regs->rbx */ + movq RBP(%rsp), %rbp /* pt_regs->rbp */ + movq EFLAGS(%rsp), %r11 /* pt_regs->flags (in r11) */ + movq RIP(%rsp), %rcx /* pt_regs->ip (in rcx) */ + addq $RAX, %rsp /* Skip r8-r15 */ + popq %rax /* pt_regs->rax */ + popq %rdx /* Skip pt_regs->cx */ + popq %rdx /* pt_regs->dx */ + popq %rsi /* pt_regs->si */ + popq %rdi /* pt_regs->di */ + + /* + * USERGS_SYSRET32 does: + * GSBASE = user's GS base + * EIP = ECX + * RFLAGS = R11 + * CS = __USER32_CS + * SS = __USER_DS + * + * ECX will not match pt_regs->cx, but we're returning to a vDSO + * trampoline that will fix up RCX, so this is okay. + * + * R12-R15 are callee-saved, so they contain whatever was in them + * when the system call started, which is already known to user + * code. We zero R8-R10 to avoid info leaks. + */ + movq RSP-ORIG_RAX(%rsp), %rsp +SYM_INNER_LABEL(entry_SYSRETL_compat_unsafe_stack, SYM_L_GLOBAL) + ANNOTATE_NOENDBR + + /* + * The original userspace %rsp (RSP-ORIG_RAX(%rsp)) is stored + * on the process stack which is not mapped to userspace and + * not readable after we SWITCH_TO_USER_CR3. Delay the CR3 + * switch until after after the last reference to the process + * stack. + * + * %r8/%r9 are zeroed before the sysret, thus safe to clobber. + */ + SWITCH_TO_USER_CR3_NOSTACK scratch_reg=%r8 scratch_reg2=%r9 + + xorl %r8d, %r8d + xorl %r9d, %r9d + xorl %r10d, %r10d + swapgs + sysretl +SYM_INNER_LABEL(entry_SYSRETL_compat_end, SYM_L_GLOBAL) + ANNOTATE_NOENDBR + int3 +SYM_CODE_END(entry_SYSCALL_compat) |