diff options
Diffstat (limited to 'arch/x86/include/asm/fpu')
| -rw-r--r-- | arch/x86/include/asm/fpu/api.h | 179 | ||||
| -rw-r--r-- | arch/x86/include/asm/fpu/regset.h | 23 | ||||
| -rw-r--r-- | arch/x86/include/asm/fpu/sched.h | 69 | ||||
| -rw-r--r-- | arch/x86/include/asm/fpu/signal.h | 37 | ||||
| -rw-r--r-- | arch/x86/include/asm/fpu/types.h | 597 | ||||
| -rw-r--r-- | arch/x86/include/asm/fpu/xcr.h | 35 | ||||
| -rw-r--r-- | arch/x86/include/asm/fpu/xstate.h | 134 |
7 files changed, 1074 insertions, 0 deletions
diff --git a/arch/x86/include/asm/fpu/api.h b/arch/x86/include/asm/fpu/api.h new file mode 100644 index 0000000000..a2be3aefff --- /dev/null +++ b/arch/x86/include/asm/fpu/api.h @@ -0,0 +1,179 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 1994 Linus Torvalds + * + * Pentium III FXSR, SSE support + * General FPU state handling cleanups + * Gareth Hughes <gareth@valinux.com>, May 2000 + * x86-64 work by Andi Kleen 2002 + */ + +#ifndef _ASM_X86_FPU_API_H +#define _ASM_X86_FPU_API_H +#include <linux/bottom_half.h> + +#include <asm/fpu/types.h> + +/* + * Use kernel_fpu_begin/end() if you intend to use FPU in kernel context. It + * disables preemption so be careful if you intend to use it for long periods + * of time. + * If you intend to use the FPU in irq/softirq you need to check first with + * irq_fpu_usable() if it is possible. + */ + +/* Kernel FPU states to initialize in kernel_fpu_begin_mask() */ +#define KFPU_387 _BITUL(0) /* 387 state will be initialized */ +#define KFPU_MXCSR _BITUL(1) /* MXCSR will be initialized */ + +extern void kernel_fpu_begin_mask(unsigned int kfpu_mask); +extern void kernel_fpu_end(void); +extern bool irq_fpu_usable(void); +extern void fpregs_mark_activate(void); + +/* Code that is unaware of kernel_fpu_begin_mask() can use this */ +static inline void kernel_fpu_begin(void) +{ +#ifdef CONFIG_X86_64 + /* + * Any 64-bit code that uses 387 instructions must explicitly request + * KFPU_387. + */ + kernel_fpu_begin_mask(KFPU_MXCSR); +#else + /* + * 32-bit kernel code may use 387 operations as well as SSE2, etc, + * as long as it checks that the CPU has the required capability. + */ + kernel_fpu_begin_mask(KFPU_387 | KFPU_MXCSR); +#endif +} + +/* + * Use fpregs_lock() while editing CPU's FPU registers or fpu->fpstate. + * A context switch will (and softirq might) save CPU's FPU registers to + * fpu->fpstate.regs and set TIF_NEED_FPU_LOAD leaving CPU's FPU registers in + * a random state. + * + * local_bh_disable() protects against both preemption and soft interrupts + * on !RT kernels. + * + * On RT kernels local_bh_disable() is not sufficient because it only + * serializes soft interrupt related sections via a local lock, but stays + * preemptible. Disabling preemption is the right choice here as bottom + * half processing is always in thread context on RT kernels so it + * implicitly prevents bottom half processing as well. + * + * Disabling preemption also serializes against kernel_fpu_begin(). + */ +static inline void fpregs_lock(void) +{ + if (!IS_ENABLED(CONFIG_PREEMPT_RT)) + local_bh_disable(); + else + preempt_disable(); +} + +static inline void fpregs_unlock(void) +{ + if (!IS_ENABLED(CONFIG_PREEMPT_RT)) + local_bh_enable(); + else + preempt_enable(); +} + +/* + * FPU state gets lazily restored before returning to userspace. So when in the + * kernel, the valid FPU state may be kept in the buffer. This function will force + * restore all the fpu state to the registers early if needed, and lock them from + * being automatically saved/restored. Then FPU state can be modified safely in the + * registers, before unlocking with fpregs_unlock(). + */ +void fpregs_lock_and_load(void); + +#ifdef CONFIG_X86_DEBUG_FPU +extern void fpregs_assert_state_consistent(void); +#else +static inline void fpregs_assert_state_consistent(void) { } +#endif + +/* + * Load the task FPU state before returning to userspace. + */ +extern void switch_fpu_return(void); + +/* + * Query the presence of one or more xfeatures. Works on any legacy CPU as well. + * + * If 'feature_name' is set then put a human-readable description of + * the feature there as well - this can be used to print error (or success) + * messages. + */ +extern int cpu_has_xfeatures(u64 xfeatures_mask, const char **feature_name); + +/* Trap handling */ +extern int fpu__exception_code(struct fpu *fpu, int trap_nr); +extern void fpu_sync_fpstate(struct fpu *fpu); +extern void fpu_reset_from_exception_fixup(void); + +/* Boot, hotplug and resume */ +extern void fpu__init_cpu(void); +extern void fpu__init_system(void); +extern void fpu__init_check_bugs(void); +extern void fpu__resume_cpu(void); + +#ifdef CONFIG_MATH_EMULATION +extern void fpstate_init_soft(struct swregs_state *soft); +#else +static inline void fpstate_init_soft(struct swregs_state *soft) {} +#endif + +/* State tracking */ +DECLARE_PER_CPU(struct fpu *, fpu_fpregs_owner_ctx); + +/* Process cleanup */ +#ifdef CONFIG_X86_64 +extern void fpstate_free(struct fpu *fpu); +#else +static inline void fpstate_free(struct fpu *fpu) { } +#endif + +/* fpstate-related functions which are exported to KVM */ +extern void fpstate_clear_xstate_component(struct fpstate *fps, unsigned int xfeature); + +extern u64 xstate_get_guest_group_perm(void); + +/* KVM specific functions */ +extern bool fpu_alloc_guest_fpstate(struct fpu_guest *gfpu); +extern void fpu_free_guest_fpstate(struct fpu_guest *gfpu); +extern int fpu_swap_kvm_fpstate(struct fpu_guest *gfpu, bool enter_guest); +extern int fpu_enable_guest_xfd_features(struct fpu_guest *guest_fpu, u64 xfeatures); + +#ifdef CONFIG_X86_64 +extern void fpu_update_guest_xfd(struct fpu_guest *guest_fpu, u64 xfd); +extern void fpu_sync_guest_vmexit_xfd_state(void); +#else +static inline void fpu_update_guest_xfd(struct fpu_guest *guest_fpu, u64 xfd) { } +static inline void fpu_sync_guest_vmexit_xfd_state(void) { } +#endif + +extern void fpu_copy_guest_fpstate_to_uabi(struct fpu_guest *gfpu, void *buf, + unsigned int size, u64 xfeatures, u32 pkru); +extern int fpu_copy_uabi_to_guest_fpstate(struct fpu_guest *gfpu, const void *buf, u64 xcr0, u32 *vpkru); + +static inline void fpstate_set_confidential(struct fpu_guest *gfpu) +{ + gfpu->fpstate->is_confidential = true; +} + +static inline bool fpstate_is_confidential(struct fpu_guest *gfpu) +{ + return gfpu->fpstate->is_confidential; +} + +/* prctl */ +extern long fpu_xstate_prctl(int option, unsigned long arg2); + +extern void fpu_idle_fpregs(void); + +#endif /* _ASM_X86_FPU_API_H */ diff --git a/arch/x86/include/asm/fpu/regset.h b/arch/x86/include/asm/fpu/regset.h new file mode 100644 index 0000000000..697b77e960 --- /dev/null +++ b/arch/x86/include/asm/fpu/regset.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * FPU regset handling methods: + */ +#ifndef _ASM_X86_FPU_REGSET_H +#define _ASM_X86_FPU_REGSET_H + +#include <linux/regset.h> + +extern user_regset_active_fn regset_fpregs_active, regset_xregset_fpregs_active, + ssp_active; +extern user_regset_get2_fn fpregs_get, xfpregs_get, fpregs_soft_get, + xstateregs_get, ssp_get; +extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set, + xstateregs_set, ssp_set; + +/* + * xstateregs_active == regset_fpregs_active. Please refer to the comment + * at the definition of regset_fpregs_active. + */ +#define xstateregs_active regset_fpregs_active + +#endif /* _ASM_X86_FPU_REGSET_H */ diff --git a/arch/x86/include/asm/fpu/sched.h b/arch/x86/include/asm/fpu/sched.h new file mode 100644 index 0000000000..ca6e5e5f16 --- /dev/null +++ b/arch/x86/include/asm/fpu/sched.h @@ -0,0 +1,69 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_X86_FPU_SCHED_H +#define _ASM_X86_FPU_SCHED_H + +#include <linux/sched.h> + +#include <asm/cpufeature.h> +#include <asm/fpu/types.h> + +#include <asm/trace/fpu.h> + +extern void save_fpregs_to_fpstate(struct fpu *fpu); +extern void fpu__drop(struct fpu *fpu); +extern int fpu_clone(struct task_struct *dst, unsigned long clone_flags, bool minimal, + unsigned long shstk_addr); +extern void fpu_flush_thread(void); + +/* + * FPU state switching for scheduling. + * + * This is a two-stage process: + * + * - switch_fpu_prepare() saves the old state. + * This is done within the context of the old process. + * + * - switch_fpu_finish() sets TIF_NEED_FPU_LOAD; the floating point state + * will get loaded on return to userspace, or when the kernel needs it. + * + * If TIF_NEED_FPU_LOAD is cleared then the CPU's FPU registers + * are saved in the current thread's FPU register state. + * + * If TIF_NEED_FPU_LOAD is set then CPU's FPU registers may not + * hold current()'s FPU registers. It is required to load the + * registers before returning to userland or using the content + * otherwise. + * + * The FPU context is only stored/restored for a user task and + * PF_KTHREAD is used to distinguish between kernel and user threads. + */ +static inline void switch_fpu_prepare(struct fpu *old_fpu, int cpu) +{ + if (cpu_feature_enabled(X86_FEATURE_FPU) && + !(current->flags & (PF_KTHREAD | PF_USER_WORKER))) { + save_fpregs_to_fpstate(old_fpu); + /* + * The save operation preserved register state, so the + * fpu_fpregs_owner_ctx is still @old_fpu. Store the + * current CPU number in @old_fpu, so the next return + * to user space can avoid the FPU register restore + * when is returns on the same CPU and still owns the + * context. + */ + old_fpu->last_cpu = cpu; + + trace_x86_fpu_regs_deactivated(old_fpu); + } +} + +/* + * Delay loading of the complete FPU state until the return to userland. + * PKRU is handled separately. + */ +static inline void switch_fpu_finish(void) +{ + if (cpu_feature_enabled(X86_FEATURE_FPU)) + set_thread_flag(TIF_NEED_FPU_LOAD); +} + +#endif /* _ASM_X86_FPU_SCHED_H */ diff --git a/arch/x86/include/asm/fpu/signal.h b/arch/x86/include/asm/fpu/signal.h new file mode 100644 index 0000000000..611fa41711 --- /dev/null +++ b/arch/x86/include/asm/fpu/signal.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * x86 FPU signal frame handling methods: + */ +#ifndef _ASM_X86_FPU_SIGNAL_H +#define _ASM_X86_FPU_SIGNAL_H + +#include <linux/compat.h> +#include <linux/user.h> + +#include <asm/fpu/types.h> + +#ifdef CONFIG_X86_64 +# include <uapi/asm/sigcontext.h> +# include <asm/user32.h> +#else +# define user_i387_ia32_struct user_i387_struct +# define user32_fxsr_struct user_fxsr_struct +#endif + +extern void convert_from_fxsr(struct user_i387_ia32_struct *env, + struct task_struct *tsk); +extern void convert_to_fxsr(struct fxregs_state *fxsave, + const struct user_i387_ia32_struct *env); + +unsigned long +fpu__alloc_mathframe(unsigned long sp, int ia32_frame, + unsigned long *buf_fx, unsigned long *size); + +unsigned long fpu__get_fpstate_size(void); + +extern bool copy_fpstate_to_sigframe(void __user *buf, void __user *fp, int size); +extern void fpu__clear_user_states(struct fpu *fpu); +extern bool fpu__restore_sig(void __user *buf, int ia32_frame); + +extern void restore_fpregs_from_fpstate(struct fpstate *fpstate, u64 mask); +#endif /* _ASM_X86_FPU_SIGNAL_H */ diff --git a/arch/x86/include/asm/fpu/types.h b/arch/x86/include/asm/fpu/types.h new file mode 100644 index 0000000000..eb810074f1 --- /dev/null +++ b/arch/x86/include/asm/fpu/types.h @@ -0,0 +1,597 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * FPU data structures: + */ +#ifndef _ASM_X86_FPU_H +#define _ASM_X86_FPU_H + +/* + * The legacy x87 FPU state format, as saved by FSAVE and + * restored by the FRSTOR instructions: + */ +struct fregs_state { + u32 cwd; /* FPU Control Word */ + u32 swd; /* FPU Status Word */ + u32 twd; /* FPU Tag Word */ + u32 fip; /* FPU IP Offset */ + u32 fcs; /* FPU IP Selector */ + u32 foo; /* FPU Operand Pointer Offset */ + u32 fos; /* FPU Operand Pointer Selector */ + + /* 8*10 bytes for each FP-reg = 80 bytes: */ + u32 st_space[20]; + + /* Software status information [not touched by FSAVE]: */ + u32 status; +}; + +/* + * The legacy fx SSE/MMX FPU state format, as saved by FXSAVE and + * restored by the FXRSTOR instructions. It's similar to the FSAVE + * format, but differs in some areas, plus has extensions at + * the end for the XMM registers. + */ +struct fxregs_state { + u16 cwd; /* Control Word */ + u16 swd; /* Status Word */ + u16 twd; /* Tag Word */ + u16 fop; /* Last Instruction Opcode */ + union { + struct { + u64 rip; /* Instruction Pointer */ + u64 rdp; /* Data Pointer */ + }; + struct { + u32 fip; /* FPU IP Offset */ + u32 fcs; /* FPU IP Selector */ + u32 foo; /* FPU Operand Offset */ + u32 fos; /* FPU Operand Selector */ + }; + }; + u32 mxcsr; /* MXCSR Register State */ + u32 mxcsr_mask; /* MXCSR Mask */ + + /* 8*16 bytes for each FP-reg = 128 bytes: */ + u32 st_space[32]; + + /* 16*16 bytes for each XMM-reg = 256 bytes: */ + u32 xmm_space[64]; + + u32 padding[12]; + + union { + u32 padding1[12]; + u32 sw_reserved[12]; + }; + +} __attribute__((aligned(16))); + +/* Default value for fxregs_state.mxcsr: */ +#define MXCSR_DEFAULT 0x1f80 + +/* Copy both mxcsr & mxcsr_flags with a single u64 memcpy: */ +#define MXCSR_AND_FLAGS_SIZE sizeof(u64) + +/* + * Software based FPU emulation state. This is arbitrary really, + * it matches the x87 format to make it easier to understand: + */ +struct swregs_state { + u32 cwd; + u32 swd; + u32 twd; + u32 fip; + u32 fcs; + u32 foo; + u32 fos; + /* 8*10 bytes for each FP-reg = 80 bytes: */ + u32 st_space[20]; + u8 ftop; + u8 changed; + u8 lookahead; + u8 no_update; + u8 rm; + u8 alimit; + struct math_emu_info *info; + u32 entry_eip; +}; + +/* + * List of XSAVE features Linux knows about: + */ +enum xfeature { + XFEATURE_FP, + XFEATURE_SSE, + /* + * Values above here are "legacy states". + * Those below are "extended states". + */ + XFEATURE_YMM, + XFEATURE_BNDREGS, + XFEATURE_BNDCSR, + XFEATURE_OPMASK, + XFEATURE_ZMM_Hi256, + XFEATURE_Hi16_ZMM, + XFEATURE_PT_UNIMPLEMENTED_SO_FAR, + XFEATURE_PKRU, + XFEATURE_PASID, + XFEATURE_CET_USER, + XFEATURE_CET_KERNEL_UNUSED, + XFEATURE_RSRVD_COMP_13, + XFEATURE_RSRVD_COMP_14, + XFEATURE_LBR, + XFEATURE_RSRVD_COMP_16, + XFEATURE_XTILE_CFG, + XFEATURE_XTILE_DATA, + + XFEATURE_MAX, +}; + +#define XFEATURE_MASK_FP (1 << XFEATURE_FP) +#define XFEATURE_MASK_SSE (1 << XFEATURE_SSE) +#define XFEATURE_MASK_YMM (1 << XFEATURE_YMM) +#define XFEATURE_MASK_BNDREGS (1 << XFEATURE_BNDREGS) +#define XFEATURE_MASK_BNDCSR (1 << XFEATURE_BNDCSR) +#define XFEATURE_MASK_OPMASK (1 << XFEATURE_OPMASK) +#define XFEATURE_MASK_ZMM_Hi256 (1 << XFEATURE_ZMM_Hi256) +#define XFEATURE_MASK_Hi16_ZMM (1 << XFEATURE_Hi16_ZMM) +#define XFEATURE_MASK_PT (1 << XFEATURE_PT_UNIMPLEMENTED_SO_FAR) +#define XFEATURE_MASK_PKRU (1 << XFEATURE_PKRU) +#define XFEATURE_MASK_PASID (1 << XFEATURE_PASID) +#define XFEATURE_MASK_CET_USER (1 << XFEATURE_CET_USER) +#define XFEATURE_MASK_CET_KERNEL (1 << XFEATURE_CET_KERNEL_UNUSED) +#define XFEATURE_MASK_LBR (1 << XFEATURE_LBR) +#define XFEATURE_MASK_XTILE_CFG (1 << XFEATURE_XTILE_CFG) +#define XFEATURE_MASK_XTILE_DATA (1 << XFEATURE_XTILE_DATA) + +#define XFEATURE_MASK_FPSSE (XFEATURE_MASK_FP | XFEATURE_MASK_SSE) +#define XFEATURE_MASK_AVX512 (XFEATURE_MASK_OPMASK \ + | XFEATURE_MASK_ZMM_Hi256 \ + | XFEATURE_MASK_Hi16_ZMM) + +#ifdef CONFIG_X86_64 +# define XFEATURE_MASK_XTILE (XFEATURE_MASK_XTILE_DATA \ + | XFEATURE_MASK_XTILE_CFG) +#else +# define XFEATURE_MASK_XTILE (0) +#endif + +#define FIRST_EXTENDED_XFEATURE XFEATURE_YMM + +struct reg_128_bit { + u8 regbytes[128/8]; +}; +struct reg_256_bit { + u8 regbytes[256/8]; +}; +struct reg_512_bit { + u8 regbytes[512/8]; +}; +struct reg_1024_byte { + u8 regbytes[1024]; +}; + +/* + * State component 2: + * + * There are 16x 256-bit AVX registers named YMM0-YMM15. + * The low 128 bits are aliased to the 16 SSE registers (XMM0-XMM15) + * and are stored in 'struct fxregs_state::xmm_space[]' in the + * "legacy" area. + * + * The high 128 bits are stored here. + */ +struct ymmh_struct { + struct reg_128_bit hi_ymm[16]; +} __packed; + +/* Intel MPX support: */ + +struct mpx_bndreg { + u64 lower_bound; + u64 upper_bound; +} __packed; +/* + * State component 3 is used for the 4 128-bit bounds registers + */ +struct mpx_bndreg_state { + struct mpx_bndreg bndreg[4]; +} __packed; + +/* + * State component 4 is used for the 64-bit user-mode MPX + * configuration register BNDCFGU and the 64-bit MPX status + * register BNDSTATUS. We call the pair "BNDCSR". + */ +struct mpx_bndcsr { + u64 bndcfgu; + u64 bndstatus; +} __packed; + +/* + * The BNDCSR state is padded out to be 64-bytes in size. + */ +struct mpx_bndcsr_state { + union { + struct mpx_bndcsr bndcsr; + u8 pad_to_64_bytes[64]; + }; +} __packed; + +/* AVX-512 Components: */ + +/* + * State component 5 is used for the 8 64-bit opmask registers + * k0-k7 (opmask state). + */ +struct avx_512_opmask_state { + u64 opmask_reg[8]; +} __packed; + +/* + * State component 6 is used for the upper 256 bits of the + * registers ZMM0-ZMM15. These 16 256-bit values are denoted + * ZMM0_H-ZMM15_H (ZMM_Hi256 state). + */ +struct avx_512_zmm_uppers_state { + struct reg_256_bit zmm_upper[16]; +} __packed; + +/* + * State component 7 is used for the 16 512-bit registers + * ZMM16-ZMM31 (Hi16_ZMM state). + */ +struct avx_512_hi16_state { + struct reg_512_bit hi16_zmm[16]; +} __packed; + +/* + * State component 9: 32-bit PKRU register. The state is + * 8 bytes long but only 4 bytes is used currently. + */ +struct pkru_state { + u32 pkru; + u32 pad; +} __packed; + +/* + * State component 11 is Control-flow Enforcement user states + */ +struct cet_user_state { + /* user control-flow settings */ + u64 user_cet; + /* user shadow stack pointer */ + u64 user_ssp; +}; + +/* + * State component 15: Architectural LBR configuration state. + * The size of Arch LBR state depends on the number of LBRs (lbr_depth). + */ + +struct lbr_entry { + u64 from; + u64 to; + u64 info; +}; + +struct arch_lbr_state { + u64 lbr_ctl; + u64 lbr_depth; + u64 ler_from; + u64 ler_to; + u64 ler_info; + struct lbr_entry entries[]; +}; + +/* + * State component 17: 64-byte tile configuration register. + */ +struct xtile_cfg { + u64 tcfg[8]; +} __packed; + +/* + * State component 18: 1KB tile data register. + * Each register represents 16 64-byte rows of the matrix + * data. But the number of registers depends on the actual + * implementation. + */ +struct xtile_data { + struct reg_1024_byte tmm; +} __packed; + +/* + * State component 10 is supervisor state used for context-switching the + * PASID state. + */ +struct ia32_pasid_state { + u64 pasid; +} __packed; + +struct xstate_header { + u64 xfeatures; + u64 xcomp_bv; + u64 reserved[6]; +} __attribute__((packed)); + +/* + * xstate_header.xcomp_bv[63] indicates that the extended_state_area + * is in compacted format. + */ +#define XCOMP_BV_COMPACTED_FORMAT ((u64)1 << 63) + +/* + * This is our most modern FPU state format, as saved by the XSAVE + * and restored by the XRSTOR instructions. + * + * It consists of a legacy fxregs portion, an xstate header and + * subsequent areas as defined by the xstate header. Not all CPUs + * support all the extensions, so the size of the extended area + * can vary quite a bit between CPUs. + */ +struct xregs_state { + struct fxregs_state i387; + struct xstate_header header; + u8 extended_state_area[]; +} __attribute__ ((packed, aligned (64))); + +/* + * This is a union of all the possible FPU state formats + * put together, so that we can pick the right one runtime. + * + * The size of the structure is determined by the largest + * member - which is the xsave area. The padding is there + * to ensure that statically-allocated task_structs (just + * the init_task today) have enough space. + */ +union fpregs_state { + struct fregs_state fsave; + struct fxregs_state fxsave; + struct swregs_state soft; + struct xregs_state xsave; + u8 __padding[PAGE_SIZE]; +}; + +struct fpstate { + /* @kernel_size: The size of the kernel register image */ + unsigned int size; + + /* @user_size: The size in non-compacted UABI format */ + unsigned int user_size; + + /* @xfeatures: xfeatures for which the storage is sized */ + u64 xfeatures; + + /* @user_xfeatures: xfeatures valid in UABI buffers */ + u64 user_xfeatures; + + /* @xfd: xfeatures disabled to trap userspace use. */ + u64 xfd; + + /* @is_valloc: Indicator for dynamically allocated state */ + unsigned int is_valloc : 1; + + /* @is_guest: Indicator for guest state (KVM) */ + unsigned int is_guest : 1; + + /* + * @is_confidential: Indicator for KVM confidential mode. + * The FPU registers are restored by the + * vmentry firmware from encrypted guest + * memory. On vmexit the FPU registers are + * saved by firmware to encrypted guest memory + * and the registers are scrubbed before + * returning to the host. So there is no + * content which is worth saving and restoring. + * The fpstate has to be there so that + * preemption and softirq FPU usage works + * without special casing. + */ + unsigned int is_confidential : 1; + + /* @in_use: State is in use */ + unsigned int in_use : 1; + + /* @regs: The register state union for all supported formats */ + union fpregs_state regs; + + /* @regs is dynamically sized! Don't add anything after @regs! */ +} __aligned(64); + +#define FPU_GUEST_PERM_LOCKED BIT_ULL(63) + +struct fpu_state_perm { + /* + * @__state_perm: + * + * This bitmap indicates the permission for state components, which + * are available to a thread group. The permission prctl() sets the + * enabled state bits in thread_group_leader()->thread.fpu. + * + * All run time operations use the per thread information in the + * currently active fpu.fpstate which contains the xfeature masks + * and sizes for kernel and user space. + * + * This master permission field is only to be used when + * task.fpu.fpstate based checks fail to validate whether the task + * is allowed to expand it's xfeatures set which requires to + * allocate a larger sized fpstate buffer. + * + * Do not access this field directly. Use the provided helper + * function. Unlocked access is possible for quick checks. + */ + u64 __state_perm; + + /* + * @__state_size: + * + * The size required for @__state_perm. Only valid to access + * with sighand locked. + */ + unsigned int __state_size; + + /* + * @__user_state_size: + * + * The size required for @__state_perm user part. Only valid to + * access with sighand locked. + */ + unsigned int __user_state_size; +}; + +/* + * Highest level per task FPU state data structure that + * contains the FPU register state plus various FPU + * state fields: + */ +struct fpu { + /* + * @last_cpu: + * + * Records the last CPU on which this context was loaded into + * FPU registers. (In the lazy-restore case we might be + * able to reuse FPU registers across multiple context switches + * this way, if no intermediate task used the FPU.) + * + * A value of -1 is used to indicate that the FPU state in context + * memory is newer than the FPU state in registers, and that the + * FPU state should be reloaded next time the task is run. + */ + unsigned int last_cpu; + + /* + * @avx512_timestamp: + * + * Records the timestamp of AVX512 use during last context switch. + */ + unsigned long avx512_timestamp; + + /* + * @fpstate: + * + * Pointer to the active struct fpstate. Initialized to + * point at @__fpstate below. + */ + struct fpstate *fpstate; + + /* + * @__task_fpstate: + * + * Pointer to an inactive struct fpstate. Initialized to NULL. Is + * used only for KVM support to swap out the regular task fpstate. + */ + struct fpstate *__task_fpstate; + + /* + * @perm: + * + * Permission related information + */ + struct fpu_state_perm perm; + + /* + * @guest_perm: + * + * Permission related information for guest pseudo FPUs + */ + struct fpu_state_perm guest_perm; + + /* + * @__fpstate: + * + * Initial in-memory storage for FPU registers which are saved in + * context switch and when the kernel uses the FPU. The registers + * are restored from this storage on return to user space if they + * are not longer containing the tasks FPU register state. + */ + struct fpstate __fpstate; + /* + * WARNING: '__fpstate' is dynamically-sized. Do not put + * anything after it here. + */ +}; + +/* + * Guest pseudo FPU container + */ +struct fpu_guest { + /* + * @xfeatures: xfeature bitmap of features which are + * currently enabled for the guest vCPU. + */ + u64 xfeatures; + + /* + * @perm: xfeature bitmap of features which are + * permitted to be enabled for the guest + * vCPU. + */ + u64 perm; + + /* + * @xfd_err: Save the guest value. + */ + u64 xfd_err; + + /* + * @uabi_size: Size required for save/restore + */ + unsigned int uabi_size; + + /* + * @fpstate: Pointer to the allocated guest fpstate + */ + struct fpstate *fpstate; +}; + +/* + * FPU state configuration data. Initialized at boot time. Read only after init. + */ +struct fpu_state_config { + /* + * @max_size: + * + * The maximum size of the register state buffer. Includes all + * supported features except independent managed features. + */ + unsigned int max_size; + + /* + * @default_size: + * + * The default size of the register state buffer. Includes all + * supported features except independent managed features and + * features which have to be requested by user space before usage. + */ + unsigned int default_size; + + /* + * @max_features: + * + * The maximum supported features bitmap. Does not include + * independent managed features. + */ + u64 max_features; + + /* + * @default_features: + * + * The default supported features bitmap. Does not include + * independent managed features and features which have to + * be requested by user space before usage. + */ + u64 default_features; + /* + * @legacy_features: + * + * Features which can be reported back to user space + * even without XSAVE support, i.e. legacy features FP + SSE + */ + u64 legacy_features; +}; + +/* FPU state configuration information */ +extern struct fpu_state_config fpu_kernel_cfg, fpu_user_cfg; + +#endif /* _ASM_X86_FPU_H */ diff --git a/arch/x86/include/asm/fpu/xcr.h b/arch/x86/include/asm/fpu/xcr.h new file mode 100644 index 0000000000..9a710c0604 --- /dev/null +++ b/arch/x86/include/asm/fpu/xcr.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_X86_FPU_XCR_H +#define _ASM_X86_FPU_XCR_H + +#define XCR_XFEATURE_ENABLED_MASK 0x00000000 +#define XCR_XFEATURE_IN_USE_MASK 0x00000001 + +static __always_inline u64 xgetbv(u32 index) +{ + u32 eax, edx; + + asm volatile("xgetbv" : "=a" (eax), "=d" (edx) : "c" (index)); + return eax + ((u64)edx << 32); +} + +static inline void xsetbv(u32 index, u64 value) +{ + u32 eax = value; + u32 edx = value >> 32; + + asm volatile("xsetbv" :: "a" (eax), "d" (edx), "c" (index)); +} + +/* + * Return a mask of xfeatures which are currently being tracked + * by the processor as being in the initial configuration. + * + * Callers should check X86_FEATURE_XGETBV1. + */ +static __always_inline u64 xfeatures_in_use(void) +{ + return xgetbv(XCR_XFEATURE_IN_USE_MASK); +} + +#endif /* _ASM_X86_FPU_XCR_H */ diff --git a/arch/x86/include/asm/fpu/xstate.h b/arch/x86/include/asm/fpu/xstate.h new file mode 100644 index 0000000000..d4427b88ee --- /dev/null +++ b/arch/x86/include/asm/fpu/xstate.h @@ -0,0 +1,134 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_X86_XSAVE_H +#define __ASM_X86_XSAVE_H + +#include <linux/uaccess.h> +#include <linux/types.h> + +#include <asm/processor.h> +#include <asm/fpu/api.h> +#include <asm/user.h> + +/* Bit 63 of XCR0 is reserved for future expansion */ +#define XFEATURE_MASK_EXTEND (~(XFEATURE_MASK_FPSSE | (1ULL << 63))) + +#define XSTATE_CPUID 0x0000000d + +#define TILE_CPUID 0x0000001d + +#define FXSAVE_SIZE 512 + +#define XSAVE_HDR_SIZE 64 +#define XSAVE_HDR_OFFSET FXSAVE_SIZE + +#define XSAVE_YMM_SIZE 256 +#define XSAVE_YMM_OFFSET (XSAVE_HDR_SIZE + XSAVE_HDR_OFFSET) + +#define XSAVE_ALIGNMENT 64 + +/* All currently supported user features */ +#define XFEATURE_MASK_USER_SUPPORTED (XFEATURE_MASK_FP | \ + XFEATURE_MASK_SSE | \ + XFEATURE_MASK_YMM | \ + XFEATURE_MASK_OPMASK | \ + XFEATURE_MASK_ZMM_Hi256 | \ + XFEATURE_MASK_Hi16_ZMM | \ + XFEATURE_MASK_PKRU | \ + XFEATURE_MASK_BNDREGS | \ + XFEATURE_MASK_BNDCSR | \ + XFEATURE_MASK_XTILE) + +/* + * Features which are restored when returning to user space. + * PKRU is not restored on return to user space because PKRU + * is switched eagerly in switch_to() and flush_thread() + */ +#define XFEATURE_MASK_USER_RESTORE \ + (XFEATURE_MASK_USER_SUPPORTED & ~XFEATURE_MASK_PKRU) + +/* Features which are dynamically enabled for a process on request */ +#define XFEATURE_MASK_USER_DYNAMIC XFEATURE_MASK_XTILE_DATA + +/* All currently supported supervisor features */ +#define XFEATURE_MASK_SUPERVISOR_SUPPORTED (XFEATURE_MASK_PASID | \ + XFEATURE_MASK_CET_USER) + +/* + * A supervisor state component may not always contain valuable information, + * and its size may be huge. Saving/restoring such supervisor state components + * at each context switch can cause high CPU and space overhead, which should + * be avoided. Such supervisor state components should only be saved/restored + * on demand. The on-demand supervisor features are set in this mask. + * + * Unlike the existing supported supervisor features, an independent supervisor + * feature does not allocate a buffer in task->fpu, and the corresponding + * supervisor state component cannot be saved/restored at each context switch. + * + * To support an independent supervisor feature, a developer should follow the + * dos and don'ts as below: + * - Do dynamically allocate a buffer for the supervisor state component. + * - Do manually invoke the XSAVES/XRSTORS instruction to save/restore the + * state component to/from the buffer. + * - Don't set the bit corresponding to the independent supervisor feature in + * IA32_XSS at run time, since it has been set at boot time. + */ +#define XFEATURE_MASK_INDEPENDENT (XFEATURE_MASK_LBR) + +/* + * Unsupported supervisor features. When a supervisor feature in this mask is + * supported in the future, move it to the supported supervisor feature mask. + */ +#define XFEATURE_MASK_SUPERVISOR_UNSUPPORTED (XFEATURE_MASK_PT | \ + XFEATURE_MASK_CET_KERNEL) + +/* All supervisor states including supported and unsupported states. */ +#define XFEATURE_MASK_SUPERVISOR_ALL (XFEATURE_MASK_SUPERVISOR_SUPPORTED | \ + XFEATURE_MASK_INDEPENDENT | \ + XFEATURE_MASK_SUPERVISOR_UNSUPPORTED) + +/* + * The feature mask required to restore FPU state: + * - All user states which are not eagerly switched in switch_to()/exec() + * - The suporvisor states + */ +#define XFEATURE_MASK_FPSTATE (XFEATURE_MASK_USER_RESTORE | \ + XFEATURE_MASK_SUPERVISOR_SUPPORTED) + +/* + * Features in this mask have space allocated in the signal frame, but may not + * have that space initialized when the feature is in its init state. + */ +#define XFEATURE_MASK_SIGFRAME_INITOPT (XFEATURE_MASK_XTILE | \ + XFEATURE_MASK_USER_DYNAMIC) + +extern u64 xstate_fx_sw_bytes[USER_XSTATE_FX_SW_WORDS]; + +extern void __init update_regset_xstate_info(unsigned int size, + u64 xstate_mask); + +int xfeature_size(int xfeature_nr); + +void xsaves(struct xregs_state *xsave, u64 mask); +void xrstors(struct xregs_state *xsave, u64 mask); + +int xfd_enable_feature(u64 xfd_err); + +#ifdef CONFIG_X86_64 +DECLARE_STATIC_KEY_FALSE(__fpu_state_size_dynamic); +#endif + +#ifdef CONFIG_X86_64 +DECLARE_STATIC_KEY_FALSE(__fpu_state_size_dynamic); + +static __always_inline __pure bool fpu_state_size_dynamic(void) +{ + return static_branch_unlikely(&__fpu_state_size_dynamic); +} +#else +static __always_inline __pure bool fpu_state_size_dynamic(void) +{ + return false; +} +#endif + +#endif |