diff options
Diffstat (limited to 'arch/x86/kernel/apic/io_apic.c')
-rw-r--r-- | arch/x86/kernel/apic/io_apic.c | 3116 |
1 files changed, 3116 insertions, 0 deletions
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c new file mode 100644 index 0000000000..00da6cf6b0 --- /dev/null +++ b/arch/x86/kernel/apic/io_apic.c @@ -0,0 +1,3116 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel IO-APIC support for multi-Pentium hosts. + * + * Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo + * + * Many thanks to Stig Venaas for trying out countless experimental + * patches and reporting/debugging problems patiently! + * + * (c) 1999, Multiple IO-APIC support, developed by + * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and + * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>, + * further tested and cleaned up by Zach Brown <zab@redhat.com> + * and Ingo Molnar <mingo@redhat.com> + * + * Fixes + * Maciej W. Rozycki : Bits for genuine 82489DX APICs; + * thanks to Eric Gilmore + * and Rolf G. Tews + * for testing these extensively + * Paul Diefenbaugh : Added full ACPI support + * + * Historical information which is worth to be preserved: + * + * - SiS APIC rmw bug: + * + * We used to have a workaround for a bug in SiS chips which + * required to rewrite the index register for a read-modify-write + * operation as the chip lost the index information which was + * setup for the read already. We cache the data now, so that + * workaround has been removed. + */ + +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/pci.h> +#include <linux/mc146818rtc.h> +#include <linux/compiler.h> +#include <linux/acpi.h> +#include <linux/export.h> +#include <linux/syscore_ops.h> +#include <linux/freezer.h> +#include <linux/kthread.h> +#include <linux/jiffies.h> /* time_after() */ +#include <linux/slab.h> +#include <linux/memblock.h> +#include <linux/msi.h> + +#include <asm/irqdomain.h> +#include <asm/io.h> +#include <asm/smp.h> +#include <asm/cpu.h> +#include <asm/desc.h> +#include <asm/proto.h> +#include <asm/acpi.h> +#include <asm/dma.h> +#include <asm/timer.h> +#include <asm/time.h> +#include <asm/i8259.h> +#include <asm/setup.h> +#include <asm/irq_remapping.h> +#include <asm/hw_irq.h> +#include <asm/apic.h> +#include <asm/pgtable.h> +#include <asm/x86_init.h> + +#define for_each_ioapic(idx) \ + for ((idx) = 0; (idx) < nr_ioapics; (idx)++) +#define for_each_ioapic_reverse(idx) \ + for ((idx) = nr_ioapics - 1; (idx) >= 0; (idx)--) +#define for_each_pin(idx, pin) \ + for ((pin) = 0; (pin) < ioapics[(idx)].nr_registers; (pin)++) +#define for_each_ioapic_pin(idx, pin) \ + for_each_ioapic((idx)) \ + for_each_pin((idx), (pin)) +#define for_each_irq_pin(entry, head) \ + list_for_each_entry(entry, &head, list) + +static DEFINE_RAW_SPINLOCK(ioapic_lock); +static DEFINE_MUTEX(ioapic_mutex); +static unsigned int ioapic_dynirq_base; +static int ioapic_initialized; + +struct irq_pin_list { + struct list_head list; + int apic, pin; +}; + +struct mp_chip_data { + struct list_head irq_2_pin; + struct IO_APIC_route_entry entry; + bool is_level; + bool active_low; + bool isa_irq; + u32 count; +}; + +struct mp_ioapic_gsi { + u32 gsi_base; + u32 gsi_end; +}; + +static struct ioapic { + /* + * # of IRQ routing registers + */ + int nr_registers; + /* + * Saved state during suspend/resume, or while enabling intr-remap. + */ + struct IO_APIC_route_entry *saved_registers; + /* I/O APIC config */ + struct mpc_ioapic mp_config; + /* IO APIC gsi routing info */ + struct mp_ioapic_gsi gsi_config; + struct ioapic_domain_cfg irqdomain_cfg; + struct irq_domain *irqdomain; + struct resource *iomem_res; +} ioapics[MAX_IO_APICS]; + +#define mpc_ioapic_ver(ioapic_idx) ioapics[ioapic_idx].mp_config.apicver + +int mpc_ioapic_id(int ioapic_idx) +{ + return ioapics[ioapic_idx].mp_config.apicid; +} + +unsigned int mpc_ioapic_addr(int ioapic_idx) +{ + return ioapics[ioapic_idx].mp_config.apicaddr; +} + +static inline struct mp_ioapic_gsi *mp_ioapic_gsi_routing(int ioapic_idx) +{ + return &ioapics[ioapic_idx].gsi_config; +} + +static inline int mp_ioapic_pin_count(int ioapic) +{ + struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(ioapic); + + return gsi_cfg->gsi_end - gsi_cfg->gsi_base + 1; +} + +static inline u32 mp_pin_to_gsi(int ioapic, int pin) +{ + return mp_ioapic_gsi_routing(ioapic)->gsi_base + pin; +} + +static inline bool mp_is_legacy_irq(int irq) +{ + return irq >= 0 && irq < nr_legacy_irqs(); +} + +static inline struct irq_domain *mp_ioapic_irqdomain(int ioapic) +{ + return ioapics[ioapic].irqdomain; +} + +int nr_ioapics; + +/* The one past the highest gsi number used */ +u32 gsi_top; + +/* MP IRQ source entries */ +struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES]; + +/* # of MP IRQ source entries */ +int mp_irq_entries; + +#ifdef CONFIG_EISA +int mp_bus_id_to_type[MAX_MP_BUSSES]; +#endif + +DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); + +bool ioapic_is_disabled __ro_after_init; + +/** + * disable_ioapic_support() - disables ioapic support at runtime + */ +void disable_ioapic_support(void) +{ +#ifdef CONFIG_PCI + noioapicquirk = 1; + noioapicreroute = -1; +#endif + ioapic_is_disabled = true; +} + +static int __init parse_noapic(char *str) +{ + /* disable IO-APIC */ + disable_ioapic_support(); + return 0; +} +early_param("noapic", parse_noapic); + +/* Will be called in mpparse/ACPI codes for saving IRQ info */ +void mp_save_irq(struct mpc_intsrc *m) +{ + int i; + + apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x," + " IRQ %02x, APIC ID %x, APIC INT %02x\n", + m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbus, + m->srcbusirq, m->dstapic, m->dstirq); + + for (i = 0; i < mp_irq_entries; i++) { + if (!memcmp(&mp_irqs[i], m, sizeof(*m))) + return; + } + + memcpy(&mp_irqs[mp_irq_entries], m, sizeof(*m)); + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); +} + +static void alloc_ioapic_saved_registers(int idx) +{ + size_t size; + + if (ioapics[idx].saved_registers) + return; + + size = sizeof(struct IO_APIC_route_entry) * ioapics[idx].nr_registers; + ioapics[idx].saved_registers = kzalloc(size, GFP_KERNEL); + if (!ioapics[idx].saved_registers) + pr_err("IOAPIC %d: suspend/resume impossible!\n", idx); +} + +static void free_ioapic_saved_registers(int idx) +{ + kfree(ioapics[idx].saved_registers); + ioapics[idx].saved_registers = NULL; +} + +int __init arch_early_ioapic_init(void) +{ + int i; + + if (!nr_legacy_irqs()) + io_apic_irqs = ~0UL; + + for_each_ioapic(i) + alloc_ioapic_saved_registers(i); + + return 0; +} + +struct io_apic { + unsigned int index; + unsigned int unused[3]; + unsigned int data; + unsigned int unused2[11]; + unsigned int eoi; +}; + +static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) +{ + return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) + + (mpc_ioapic_addr(idx) & ~PAGE_MASK); +} + +static inline void io_apic_eoi(unsigned int apic, unsigned int vector) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + writel(vector, &io_apic->eoi); +} + +unsigned int native_io_apic_read(unsigned int apic, unsigned int reg) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + writel(reg, &io_apic->index); + return readl(&io_apic->data); +} + +static void io_apic_write(unsigned int apic, unsigned int reg, + unsigned int value) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + + writel(reg, &io_apic->index); + writel(value, &io_apic->data); +} + +static struct IO_APIC_route_entry __ioapic_read_entry(int apic, int pin) +{ + struct IO_APIC_route_entry entry; + + entry.w1 = io_apic_read(apic, 0x10 + 2 * pin); + entry.w2 = io_apic_read(apic, 0x11 + 2 * pin); + + return entry; +} + +static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) +{ + struct IO_APIC_route_entry entry; + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + entry = __ioapic_read_entry(apic, pin); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + return entry; +} + +/* + * When we write a new IO APIC routing entry, we need to write the high + * word first! If the mask bit in the low word is clear, we will enable + * the interrupt, and we need to make sure the entry is fully populated + * before that happens. + */ +static void __ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) +{ + io_apic_write(apic, 0x11 + 2*pin, e.w2); + io_apic_write(apic, 0x10 + 2*pin, e.w1); +} + +static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + __ioapic_write_entry(apic, pin, e); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); +} + +/* + * When we mask an IO APIC routing entry, we need to write the low + * word first, in order to set the mask bit before we change the + * high bits! + */ +static void ioapic_mask_entry(int apic, int pin) +{ + struct IO_APIC_route_entry e = { .masked = true }; + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x10 + 2*pin, e.w1); + io_apic_write(apic, 0x11 + 2*pin, e.w2); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); +} + +/* + * The common case is 1:1 IRQ<->pin mappings. Sometimes there are + * shared ISA-space IRQs, so we have to support them. We are super + * fast in the common case, and fast for shared ISA-space IRQs. + */ +static int __add_pin_to_irq_node(struct mp_chip_data *data, + int node, int apic, int pin) +{ + struct irq_pin_list *entry; + + /* don't allow duplicates */ + for_each_irq_pin(entry, data->irq_2_pin) + if (entry->apic == apic && entry->pin == pin) + return 0; + + entry = kzalloc_node(sizeof(struct irq_pin_list), GFP_ATOMIC, node); + if (!entry) { + pr_err("can not alloc irq_pin_list (%d,%d,%d)\n", + node, apic, pin); + return -ENOMEM; + } + entry->apic = apic; + entry->pin = pin; + list_add_tail(&entry->list, &data->irq_2_pin); + + return 0; +} + +static void __remove_pin_from_irq(struct mp_chip_data *data, int apic, int pin) +{ + struct irq_pin_list *tmp, *entry; + + list_for_each_entry_safe(entry, tmp, &data->irq_2_pin, list) + if (entry->apic == apic && entry->pin == pin) { + list_del(&entry->list); + kfree(entry); + return; + } +} + +static void add_pin_to_irq_node(struct mp_chip_data *data, + int node, int apic, int pin) +{ + if (__add_pin_to_irq_node(data, node, apic, pin)) + panic("IO-APIC: failed to add irq-pin. Can not proceed\n"); +} + +/* + * Reroute an IRQ to a different pin. + */ +static void __init replace_pin_at_irq_node(struct mp_chip_data *data, int node, + int oldapic, int oldpin, + int newapic, int newpin) +{ + struct irq_pin_list *entry; + + for_each_irq_pin(entry, data->irq_2_pin) { + if (entry->apic == oldapic && entry->pin == oldpin) { + entry->apic = newapic; + entry->pin = newpin; + /* every one is different, right? */ + return; + } + } + + /* old apic/pin didn't exist, so just add new ones */ + add_pin_to_irq_node(data, node, newapic, newpin); +} + +static void io_apic_modify_irq(struct mp_chip_data *data, bool masked, + void (*final)(struct irq_pin_list *entry)) +{ + struct irq_pin_list *entry; + + data->entry.masked = masked; + + for_each_irq_pin(entry, data->irq_2_pin) { + io_apic_write(entry->apic, 0x10 + 2 * entry->pin, data->entry.w1); + if (final) + final(entry); + } +} + +static void io_apic_sync(struct irq_pin_list *entry) +{ + /* + * Synchronize the IO-APIC and the CPU by doing + * a dummy read from the IO-APIC + */ + struct io_apic __iomem *io_apic; + + io_apic = io_apic_base(entry->apic); + readl(&io_apic->data); +} + +static void mask_ioapic_irq(struct irq_data *irq_data) +{ + struct mp_chip_data *data = irq_data->chip_data; + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + io_apic_modify_irq(data, true, &io_apic_sync); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void __unmask_ioapic(struct mp_chip_data *data) +{ + io_apic_modify_irq(data, false, NULL); +} + +static void unmask_ioapic_irq(struct irq_data *irq_data) +{ + struct mp_chip_data *data = irq_data->chip_data; + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + __unmask_ioapic(data); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); +} + +/* + * IO-APIC versions below 0x20 don't support EOI register. + * For the record, here is the information about various versions: + * 0Xh 82489DX + * 1Xh I/OAPIC or I/O(x)APIC which are not PCI 2.2 Compliant + * 2Xh I/O(x)APIC which is PCI 2.2 Compliant + * 30h-FFh Reserved + * + * Some of the Intel ICH Specs (ICH2 to ICH5) documents the io-apic + * version as 0x2. This is an error with documentation and these ICH chips + * use io-apic's of version 0x20. + * + * For IO-APIC's with EOI register, we use that to do an explicit EOI. + * Otherwise, we simulate the EOI message manually by changing the trigger + * mode to edge and then back to level, with RTE being masked during this. + */ +static void __eoi_ioapic_pin(int apic, int pin, int vector) +{ + if (mpc_ioapic_ver(apic) >= 0x20) { + io_apic_eoi(apic, vector); + } else { + struct IO_APIC_route_entry entry, entry1; + + entry = entry1 = __ioapic_read_entry(apic, pin); + + /* + * Mask the entry and change the trigger mode to edge. + */ + entry1.masked = true; + entry1.is_level = false; + + __ioapic_write_entry(apic, pin, entry1); + + /* + * Restore the previous level triggered entry. + */ + __ioapic_write_entry(apic, pin, entry); + } +} + +static void eoi_ioapic_pin(int vector, struct mp_chip_data *data) +{ + unsigned long flags; + struct irq_pin_list *entry; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + for_each_irq_pin(entry, data->irq_2_pin) + __eoi_ioapic_pin(entry->apic, entry->pin, vector); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) +{ + struct IO_APIC_route_entry entry; + + /* Check delivery_mode to be sure we're not clearing an SMI pin */ + entry = ioapic_read_entry(apic, pin); + if (entry.delivery_mode == APIC_DELIVERY_MODE_SMI) + return; + + /* + * Make sure the entry is masked and re-read the contents to check + * if it is a level triggered pin and if the remote-IRR is set. + */ + if (!entry.masked) { + entry.masked = true; + ioapic_write_entry(apic, pin, entry); + entry = ioapic_read_entry(apic, pin); + } + + if (entry.irr) { + unsigned long flags; + + /* + * Make sure the trigger mode is set to level. Explicit EOI + * doesn't clear the remote-IRR if the trigger mode is not + * set to level. + */ + if (!entry.is_level) { + entry.is_level = true; + ioapic_write_entry(apic, pin, entry); + } + raw_spin_lock_irqsave(&ioapic_lock, flags); + __eoi_ioapic_pin(apic, pin, entry.vector); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + } + + /* + * Clear the rest of the bits in the IO-APIC RTE except for the mask + * bit. + */ + ioapic_mask_entry(apic, pin); + entry = ioapic_read_entry(apic, pin); + if (entry.irr) + pr_err("Unable to reset IRR for apic: %d, pin :%d\n", + mpc_ioapic_id(apic), pin); +} + +void clear_IO_APIC (void) +{ + int apic, pin; + + for_each_ioapic_pin(apic, pin) + clear_IO_APIC_pin(apic, pin); +} + +#ifdef CONFIG_X86_32 +/* + * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to + * specific CPU-side IRQs. + */ + +#define MAX_PIRQS 8 +static int pirq_entries[MAX_PIRQS] = { + [0 ... MAX_PIRQS - 1] = -1 +}; + +static int __init ioapic_pirq_setup(char *str) +{ + int i, max; + int ints[MAX_PIRQS+1]; + + get_options(str, ARRAY_SIZE(ints), ints); + + apic_printk(APIC_VERBOSE, KERN_INFO + "PIRQ redirection, working around broken MP-BIOS.\n"); + max = MAX_PIRQS; + if (ints[0] < MAX_PIRQS) + max = ints[0]; + + for (i = 0; i < max; i++) { + apic_printk(APIC_VERBOSE, KERN_DEBUG + "... PIRQ%d -> IRQ %d\n", i, ints[i+1]); + /* + * PIRQs are mapped upside down, usually. + */ + pirq_entries[MAX_PIRQS-i-1] = ints[i+1]; + } + return 1; +} + +__setup("pirq=", ioapic_pirq_setup); +#endif /* CONFIG_X86_32 */ + +/* + * Saves all the IO-APIC RTE's + */ +int save_ioapic_entries(void) +{ + int apic, pin; + int err = 0; + + for_each_ioapic(apic) { + if (!ioapics[apic].saved_registers) { + err = -ENOMEM; + continue; + } + + for_each_pin(apic, pin) + ioapics[apic].saved_registers[pin] = + ioapic_read_entry(apic, pin); + } + + return err; +} + +/* + * Mask all IO APIC entries. + */ +void mask_ioapic_entries(void) +{ + int apic, pin; + + for_each_ioapic(apic) { + if (!ioapics[apic].saved_registers) + continue; + + for_each_pin(apic, pin) { + struct IO_APIC_route_entry entry; + + entry = ioapics[apic].saved_registers[pin]; + if (!entry.masked) { + entry.masked = true; + ioapic_write_entry(apic, pin, entry); + } + } + } +} + +/* + * Restore IO APIC entries which was saved in the ioapic structure. + */ +int restore_ioapic_entries(void) +{ + int apic, pin; + + for_each_ioapic(apic) { + if (!ioapics[apic].saved_registers) + continue; + + for_each_pin(apic, pin) + ioapic_write_entry(apic, pin, + ioapics[apic].saved_registers[pin]); + } + return 0; +} + +/* + * Find the IRQ entry number of a certain pin. + */ +static int find_irq_entry(int ioapic_idx, int pin, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) + if (mp_irqs[i].irqtype == type && + (mp_irqs[i].dstapic == mpc_ioapic_id(ioapic_idx) || + mp_irqs[i].dstapic == MP_APIC_ALL) && + mp_irqs[i].dstirq == pin) + return i; + + return -1; +} + +/* + * Find the pin to which IRQ[irq] (ISA) is connected + */ +static int __init find_isa_irq_pin(int irq, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].srcbus; + + if (test_bit(lbus, mp_bus_not_pci) && + (mp_irqs[i].irqtype == type) && + (mp_irqs[i].srcbusirq == irq)) + + return mp_irqs[i].dstirq; + } + return -1; +} + +static int __init find_isa_irq_apic(int irq, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].srcbus; + + if (test_bit(lbus, mp_bus_not_pci) && + (mp_irqs[i].irqtype == type) && + (mp_irqs[i].srcbusirq == irq)) + break; + } + + if (i < mp_irq_entries) { + int ioapic_idx; + + for_each_ioapic(ioapic_idx) + if (mpc_ioapic_id(ioapic_idx) == mp_irqs[i].dstapic) + return ioapic_idx; + } + + return -1; +} + +static bool irq_active_low(int idx) +{ + int bus = mp_irqs[idx].srcbus; + + /* + * Determine IRQ line polarity (high active or low active): + */ + switch (mp_irqs[idx].irqflag & MP_IRQPOL_MASK) { + case MP_IRQPOL_DEFAULT: + /* + * Conforms to spec, ie. bus-type dependent polarity. PCI + * defaults to low active. [E]ISA defaults to high active. + */ + return !test_bit(bus, mp_bus_not_pci); + case MP_IRQPOL_ACTIVE_HIGH: + return false; + case MP_IRQPOL_RESERVED: + pr_warn("IOAPIC: Invalid polarity: 2, defaulting to low\n"); + fallthrough; + case MP_IRQPOL_ACTIVE_LOW: + default: /* Pointless default required due to do gcc stupidity */ + return true; + } +} + +#ifdef CONFIG_EISA +/* + * EISA Edge/Level control register, ELCR + */ +static bool EISA_ELCR(unsigned int irq) +{ + if (irq < nr_legacy_irqs()) { + unsigned int port = PIC_ELCR1 + (irq >> 3); + return (inb(port) >> (irq & 7)) & 1; + } + apic_printk(APIC_VERBOSE, KERN_INFO + "Broken MPtable reports ISA irq %d\n", irq); + return false; +} + +/* + * EISA interrupts are always active high and can be edge or level + * triggered depending on the ELCR value. If an interrupt is listed as + * EISA conforming in the MP table, that means its trigger type must be + * read in from the ELCR. + */ +static bool eisa_irq_is_level(int idx, int bus, bool level) +{ + switch (mp_bus_id_to_type[bus]) { + case MP_BUS_PCI: + case MP_BUS_ISA: + return level; + case MP_BUS_EISA: + return EISA_ELCR(mp_irqs[idx].srcbusirq); + } + pr_warn("IOAPIC: Invalid srcbus: %d defaulting to level\n", bus); + return true; +} +#else +static inline int eisa_irq_is_level(int idx, int bus, bool level) +{ + return level; +} +#endif + +static bool irq_is_level(int idx) +{ + int bus = mp_irqs[idx].srcbus; + bool level; + + /* + * Determine IRQ trigger mode (edge or level sensitive): + */ + switch (mp_irqs[idx].irqflag & MP_IRQTRIG_MASK) { + case MP_IRQTRIG_DEFAULT: + /* + * Conforms to spec, ie. bus-type dependent trigger + * mode. PCI defaults to level, ISA to edge. + */ + level = !test_bit(bus, mp_bus_not_pci); + /* Take EISA into account */ + return eisa_irq_is_level(idx, bus, level); + case MP_IRQTRIG_EDGE: + return false; + case MP_IRQTRIG_RESERVED: + pr_warn("IOAPIC: Invalid trigger mode 2 defaulting to level\n"); + fallthrough; + case MP_IRQTRIG_LEVEL: + default: /* Pointless default required due to do gcc stupidity */ + return true; + } +} + +static int __acpi_get_override_irq(u32 gsi, bool *trigger, bool *polarity) +{ + int ioapic, pin, idx; + + if (ioapic_is_disabled) + return -1; + + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) + return -1; + + pin = mp_find_ioapic_pin(ioapic, gsi); + if (pin < 0) + return -1; + + idx = find_irq_entry(ioapic, pin, mp_INT); + if (idx < 0) + return -1; + + *trigger = irq_is_level(idx); + *polarity = irq_active_low(idx); + return 0; +} + +#ifdef CONFIG_ACPI +int acpi_get_override_irq(u32 gsi, int *is_level, int *active_low) +{ + *is_level = *active_low = 0; + return __acpi_get_override_irq(gsi, (bool *)is_level, + (bool *)active_low); +} +#endif + +void ioapic_set_alloc_attr(struct irq_alloc_info *info, int node, + int trigger, int polarity) +{ + init_irq_alloc_info(info, NULL); + info->type = X86_IRQ_ALLOC_TYPE_IOAPIC; + info->ioapic.node = node; + info->ioapic.is_level = trigger; + info->ioapic.active_low = polarity; + info->ioapic.valid = 1; +} + +static void ioapic_copy_alloc_attr(struct irq_alloc_info *dst, + struct irq_alloc_info *src, + u32 gsi, int ioapic_idx, int pin) +{ + bool level, pol_low; + + copy_irq_alloc_info(dst, src); + dst->type = X86_IRQ_ALLOC_TYPE_IOAPIC; + dst->devid = mpc_ioapic_id(ioapic_idx); + dst->ioapic.pin = pin; + dst->ioapic.valid = 1; + if (src && src->ioapic.valid) { + dst->ioapic.node = src->ioapic.node; + dst->ioapic.is_level = src->ioapic.is_level; + dst->ioapic.active_low = src->ioapic.active_low; + } else { + dst->ioapic.node = NUMA_NO_NODE; + if (__acpi_get_override_irq(gsi, &level, &pol_low) >= 0) { + dst->ioapic.is_level = level; + dst->ioapic.active_low = pol_low; + } else { + /* + * PCI interrupts are always active low level + * triggered. + */ + dst->ioapic.is_level = true; + dst->ioapic.active_low = true; + } + } +} + +static int ioapic_alloc_attr_node(struct irq_alloc_info *info) +{ + return (info && info->ioapic.valid) ? info->ioapic.node : NUMA_NO_NODE; +} + +static void mp_register_handler(unsigned int irq, bool level) +{ + irq_flow_handler_t hdl; + bool fasteoi; + + if (level) { + irq_set_status_flags(irq, IRQ_LEVEL); + fasteoi = true; + } else { + irq_clear_status_flags(irq, IRQ_LEVEL); + fasteoi = false; + } + + hdl = fasteoi ? handle_fasteoi_irq : handle_edge_irq; + __irq_set_handler(irq, hdl, 0, fasteoi ? "fasteoi" : "edge"); +} + +static bool mp_check_pin_attr(int irq, struct irq_alloc_info *info) +{ + struct mp_chip_data *data = irq_get_chip_data(irq); + + /* + * setup_IO_APIC_irqs() programs all legacy IRQs with default trigger + * and polarity attributes. So allow the first user to reprogram the + * pin with real trigger and polarity attributes. + */ + if (irq < nr_legacy_irqs() && data->count == 1) { + if (info->ioapic.is_level != data->is_level) + mp_register_handler(irq, info->ioapic.is_level); + data->entry.is_level = data->is_level = info->ioapic.is_level; + data->entry.active_low = data->active_low = info->ioapic.active_low; + } + + return data->is_level == info->ioapic.is_level && + data->active_low == info->ioapic.active_low; +} + +static int alloc_irq_from_domain(struct irq_domain *domain, int ioapic, u32 gsi, + struct irq_alloc_info *info) +{ + bool legacy = false; + int irq = -1; + int type = ioapics[ioapic].irqdomain_cfg.type; + + switch (type) { + case IOAPIC_DOMAIN_LEGACY: + /* + * Dynamically allocate IRQ number for non-ISA IRQs in the first + * 16 GSIs on some weird platforms. + */ + if (!ioapic_initialized || gsi >= nr_legacy_irqs()) + irq = gsi; + legacy = mp_is_legacy_irq(irq); + break; + case IOAPIC_DOMAIN_STRICT: + irq = gsi; + break; + case IOAPIC_DOMAIN_DYNAMIC: + break; + default: + WARN(1, "ioapic: unknown irqdomain type %d\n", type); + return -1; + } + + return __irq_domain_alloc_irqs(domain, irq, 1, + ioapic_alloc_attr_node(info), + info, legacy, NULL); +} + +/* + * Need special handling for ISA IRQs because there may be multiple IOAPIC pins + * sharing the same ISA IRQ number and irqdomain only supports 1:1 mapping + * between IOAPIC pin and IRQ number. A typical IOAPIC has 24 pins, pin 0-15 are + * used for legacy IRQs and pin 16-23 are used for PCI IRQs (PIRQ A-H). + * When ACPI is disabled, only legacy IRQ numbers (IRQ0-15) are available, and + * some BIOSes may use MP Interrupt Source records to override IRQ numbers for + * PIRQs instead of reprogramming the interrupt routing logic. Thus there may be + * multiple pins sharing the same legacy IRQ number when ACPI is disabled. + */ +static int alloc_isa_irq_from_domain(struct irq_domain *domain, + int irq, int ioapic, int pin, + struct irq_alloc_info *info) +{ + struct mp_chip_data *data; + struct irq_data *irq_data = irq_get_irq_data(irq); + int node = ioapic_alloc_attr_node(info); + + /* + * Legacy ISA IRQ has already been allocated, just add pin to + * the pin list associated with this IRQ and program the IOAPIC + * entry. The IOAPIC entry + */ + if (irq_data && irq_data->parent_data) { + if (!mp_check_pin_attr(irq, info)) + return -EBUSY; + if (__add_pin_to_irq_node(irq_data->chip_data, node, ioapic, + info->ioapic.pin)) + return -ENOMEM; + } else { + info->flags |= X86_IRQ_ALLOC_LEGACY; + irq = __irq_domain_alloc_irqs(domain, irq, 1, node, info, true, + NULL); + if (irq >= 0) { + irq_data = irq_domain_get_irq_data(domain, irq); + data = irq_data->chip_data; + data->isa_irq = true; + } + } + + return irq; +} + +static int mp_map_pin_to_irq(u32 gsi, int idx, int ioapic, int pin, + unsigned int flags, struct irq_alloc_info *info) +{ + int irq; + bool legacy = false; + struct irq_alloc_info tmp; + struct mp_chip_data *data; + struct irq_domain *domain = mp_ioapic_irqdomain(ioapic); + + if (!domain) + return -ENOSYS; + + if (idx >= 0 && test_bit(mp_irqs[idx].srcbus, mp_bus_not_pci)) { + irq = mp_irqs[idx].srcbusirq; + legacy = mp_is_legacy_irq(irq); + /* + * IRQ2 is unusable for historical reasons on systems which + * have a legacy PIC. See the comment vs. IRQ2 further down. + * + * If this gets removed at some point then the related code + * in lapic_assign_system_vectors() needs to be adjusted as + * well. + */ + if (legacy && irq == PIC_CASCADE_IR) + return -EINVAL; + } + + mutex_lock(&ioapic_mutex); + if (!(flags & IOAPIC_MAP_ALLOC)) { + if (!legacy) { + irq = irq_find_mapping(domain, pin); + if (irq == 0) + irq = -ENOENT; + } + } else { + ioapic_copy_alloc_attr(&tmp, info, gsi, ioapic, pin); + if (legacy) + irq = alloc_isa_irq_from_domain(domain, irq, + ioapic, pin, &tmp); + else if ((irq = irq_find_mapping(domain, pin)) == 0) + irq = alloc_irq_from_domain(domain, ioapic, gsi, &tmp); + else if (!mp_check_pin_attr(irq, &tmp)) + irq = -EBUSY; + if (irq >= 0) { + data = irq_get_chip_data(irq); + data->count++; + } + } + mutex_unlock(&ioapic_mutex); + + return irq; +} + +static int pin_2_irq(int idx, int ioapic, int pin, unsigned int flags) +{ + u32 gsi = mp_pin_to_gsi(ioapic, pin); + + /* + * Debugging check, we are in big trouble if this message pops up! + */ + if (mp_irqs[idx].dstirq != pin) + pr_err("broken BIOS or MPTABLE parser, ayiee!!\n"); + +#ifdef CONFIG_X86_32 + /* + * PCI IRQ command line redirection. Yes, limits are hardcoded. + */ + if ((pin >= 16) && (pin <= 23)) { + if (pirq_entries[pin-16] != -1) { + if (!pirq_entries[pin-16]) { + apic_printk(APIC_VERBOSE, KERN_DEBUG + "disabling PIRQ%d\n", pin-16); + } else { + int irq = pirq_entries[pin-16]; + apic_printk(APIC_VERBOSE, KERN_DEBUG + "using PIRQ%d -> IRQ %d\n", + pin-16, irq); + return irq; + } + } + } +#endif + + return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags, NULL); +} + +int mp_map_gsi_to_irq(u32 gsi, unsigned int flags, struct irq_alloc_info *info) +{ + int ioapic, pin, idx; + + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) + return -ENODEV; + + pin = mp_find_ioapic_pin(ioapic, gsi); + idx = find_irq_entry(ioapic, pin, mp_INT); + if ((flags & IOAPIC_MAP_CHECK) && idx < 0) + return -ENODEV; + + return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags, info); +} + +void mp_unmap_irq(int irq) +{ + struct irq_data *irq_data = irq_get_irq_data(irq); + struct mp_chip_data *data; + + if (!irq_data || !irq_data->domain) + return; + + data = irq_data->chip_data; + if (!data || data->isa_irq) + return; + + mutex_lock(&ioapic_mutex); + if (--data->count == 0) + irq_domain_free_irqs(irq, 1); + mutex_unlock(&ioapic_mutex); +} + +/* + * Find a specific PCI IRQ entry. + * Not an __init, possibly needed by modules + */ +int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) +{ + int irq, i, best_ioapic = -1, best_idx = -1; + + apic_printk(APIC_DEBUG, + "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", + bus, slot, pin); + if (test_bit(bus, mp_bus_not_pci)) { + apic_printk(APIC_VERBOSE, + "PCI BIOS passed nonexistent PCI bus %d!\n", bus); + return -1; + } + + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].srcbus; + int ioapic_idx, found = 0; + + if (bus != lbus || mp_irqs[i].irqtype != mp_INT || + slot != ((mp_irqs[i].srcbusirq >> 2) & 0x1f)) + continue; + + for_each_ioapic(ioapic_idx) + if (mpc_ioapic_id(ioapic_idx) == mp_irqs[i].dstapic || + mp_irqs[i].dstapic == MP_APIC_ALL) { + found = 1; + break; + } + if (!found) + continue; + + /* Skip ISA IRQs */ + irq = pin_2_irq(i, ioapic_idx, mp_irqs[i].dstirq, 0); + if (irq > 0 && !IO_APIC_IRQ(irq)) + continue; + + if (pin == (mp_irqs[i].srcbusirq & 3)) { + best_idx = i; + best_ioapic = ioapic_idx; + goto out; + } + + /* + * Use the first all-but-pin matching entry as a + * best-guess fuzzy result for broken mptables. + */ + if (best_idx < 0) { + best_idx = i; + best_ioapic = ioapic_idx; + } + } + if (best_idx < 0) + return -1; + +out: + return pin_2_irq(best_idx, best_ioapic, mp_irqs[best_idx].dstirq, + IOAPIC_MAP_ALLOC); +} +EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); + +static struct irq_chip ioapic_chip, ioapic_ir_chip; + +static void __init setup_IO_APIC_irqs(void) +{ + unsigned int ioapic, pin; + int idx; + + apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); + + for_each_ioapic_pin(ioapic, pin) { + idx = find_irq_entry(ioapic, pin, mp_INT); + if (idx < 0) + apic_printk(APIC_VERBOSE, + KERN_DEBUG " apic %d pin %d not connected\n", + mpc_ioapic_id(ioapic), pin); + else + pin_2_irq(idx, ioapic, pin, + ioapic ? 0 : IOAPIC_MAP_ALLOC); + } +} + +void ioapic_zap_locks(void) +{ + raw_spin_lock_init(&ioapic_lock); +} + +static void io_apic_print_entries(unsigned int apic, unsigned int nr_entries) +{ + struct IO_APIC_route_entry entry; + char buf[256]; + int i; + + printk(KERN_DEBUG "IOAPIC %d:\n", apic); + for (i = 0; i <= nr_entries; i++) { + entry = ioapic_read_entry(apic, i); + snprintf(buf, sizeof(buf), + " pin%02x, %s, %s, %s, V(%02X), IRR(%1d), S(%1d)", + i, + entry.masked ? "disabled" : "enabled ", + entry.is_level ? "level" : "edge ", + entry.active_low ? "low " : "high", + entry.vector, entry.irr, entry.delivery_status); + if (entry.ir_format) { + printk(KERN_DEBUG "%s, remapped, I(%04X), Z(%X)\n", + buf, + (entry.ir_index_15 << 15) | entry.ir_index_0_14, + entry.ir_zero); + } else { + printk(KERN_DEBUG "%s, %s, D(%02X%02X), M(%1d)\n", buf, + entry.dest_mode_logical ? "logical " : "physical", + entry.virt_destid_8_14, entry.destid_0_7, + entry.delivery_mode); + } + } +} + +static void __init print_IO_APIC(int ioapic_idx) +{ + union IO_APIC_reg_00 reg_00; + union IO_APIC_reg_01 reg_01; + union IO_APIC_reg_02 reg_02; + union IO_APIC_reg_03 reg_03; + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(ioapic_idx, 0); + reg_01.raw = io_apic_read(ioapic_idx, 1); + if (reg_01.bits.version >= 0x10) + reg_02.raw = io_apic_read(ioapic_idx, 2); + if (reg_01.bits.version >= 0x20) + reg_03.raw = io_apic_read(ioapic_idx, 3); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + printk(KERN_DEBUG "IO APIC #%d......\n", mpc_ioapic_id(ioapic_idx)); + printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); + printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); + printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); + printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS); + + printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)®_01); + printk(KERN_DEBUG "....... : max redirection entries: %02X\n", + reg_01.bits.entries); + + printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ); + printk(KERN_DEBUG "....... : IO APIC version: %02X\n", + reg_01.bits.version); + + /* + * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02, + * but the value of reg_02 is read as the previous read register + * value, so ignore it if reg_02 == reg_01. + */ + if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) { + printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw); + printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration); + } + + /* + * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02 + * or reg_03, but the value of reg_0[23] is read as the previous read + * register value, so ignore it if reg_03 == reg_0[12]. + */ + if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw && + reg_03.raw != reg_01.raw) { + printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw); + printk(KERN_DEBUG "....... : Boot DT : %X\n", reg_03.bits.boot_DT); + } + + printk(KERN_DEBUG ".... IRQ redirection table:\n"); + io_apic_print_entries(ioapic_idx, reg_01.bits.entries); +} + +void __init print_IO_APICs(void) +{ + int ioapic_idx; + unsigned int irq; + + printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); + for_each_ioapic(ioapic_idx) + printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", + mpc_ioapic_id(ioapic_idx), + ioapics[ioapic_idx].nr_registers); + + /* + * We are a bit conservative about what we expect. We have to + * know about every hardware change ASAP. + */ + printk(KERN_INFO "testing the IO APIC.......................\n"); + + for_each_ioapic(ioapic_idx) + print_IO_APIC(ioapic_idx); + + printk(KERN_DEBUG "IRQ to pin mappings:\n"); + for_each_active_irq(irq) { + struct irq_pin_list *entry; + struct irq_chip *chip; + struct mp_chip_data *data; + + chip = irq_get_chip(irq); + if (chip != &ioapic_chip && chip != &ioapic_ir_chip) + continue; + data = irq_get_chip_data(irq); + if (!data) + continue; + if (list_empty(&data->irq_2_pin)) + continue; + + printk(KERN_DEBUG "IRQ%d ", irq); + for_each_irq_pin(entry, data->irq_2_pin) + pr_cont("-> %d:%d", entry->apic, entry->pin); + pr_cont("\n"); + } + + printk(KERN_INFO ".................................... done.\n"); +} + +/* Where if anywhere is the i8259 connect in external int mode */ +static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; + +void __init enable_IO_APIC(void) +{ + int i8259_apic, i8259_pin; + int apic, pin; + + if (ioapic_is_disabled) + nr_ioapics = 0; + + if (!nr_legacy_irqs() || !nr_ioapics) + return; + + for_each_ioapic_pin(apic, pin) { + /* See if any of the pins is in ExtINT mode */ + struct IO_APIC_route_entry entry = ioapic_read_entry(apic, pin); + + /* If the interrupt line is enabled and in ExtInt mode + * I have found the pin where the i8259 is connected. + */ + if (!entry.masked && + entry.delivery_mode == APIC_DELIVERY_MODE_EXTINT) { + ioapic_i8259.apic = apic; + ioapic_i8259.pin = pin; + goto found_i8259; + } + } + found_i8259: + /* Look to see what if the MP table has reported the ExtINT */ + /* If we could not find the appropriate pin by looking at the ioapic + * the i8259 probably is not connected the ioapic but give the + * mptable a chance anyway. + */ + i8259_pin = find_isa_irq_pin(0, mp_ExtINT); + i8259_apic = find_isa_irq_apic(0, mp_ExtINT); + /* Trust the MP table if nothing is setup in the hardware */ + if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) { + printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n"); + ioapic_i8259.pin = i8259_pin; + ioapic_i8259.apic = i8259_apic; + } + /* Complain if the MP table and the hardware disagree */ + if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) && + (i8259_pin >= 0) && (ioapic_i8259.pin >= 0)) + { + printk(KERN_WARNING "ExtINT in hardware and MP table differ\n"); + } + + /* + * Do not trust the IO-APIC being empty at bootup + */ + clear_IO_APIC(); +} + +void native_restore_boot_irq_mode(void) +{ + /* + * If the i8259 is routed through an IOAPIC + * Put that IOAPIC in virtual wire mode + * so legacy interrupts can be delivered. + */ + if (ioapic_i8259.pin != -1) { + struct IO_APIC_route_entry entry; + u32 apic_id = read_apic_id(); + + memset(&entry, 0, sizeof(entry)); + entry.masked = false; + entry.is_level = false; + entry.active_low = false; + entry.dest_mode_logical = false; + entry.delivery_mode = APIC_DELIVERY_MODE_EXTINT; + entry.destid_0_7 = apic_id & 0xFF; + entry.virt_destid_8_14 = apic_id >> 8; + + /* + * Add it to the IO-APIC irq-routing table: + */ + ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry); + } + + if (boot_cpu_has(X86_FEATURE_APIC) || apic_from_smp_config()) + disconnect_bsp_APIC(ioapic_i8259.pin != -1); +} + +void restore_boot_irq_mode(void) +{ + if (!nr_legacy_irqs()) + return; + + x86_apic_ops.restore(); +} + +#ifdef CONFIG_X86_32 +/* + * function to set the IO-APIC physical IDs based on the + * values stored in the MPC table. + * + * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999 + */ +void __init setup_ioapic_ids_from_mpc_nocheck(void) +{ + union IO_APIC_reg_00 reg_00; + physid_mask_t phys_id_present_map; + int ioapic_idx; + int i; + unsigned char old_id; + unsigned long flags; + + /* + * This is broken; anything with a real cpu count has to + * circumvent this idiocy regardless. + */ + apic->ioapic_phys_id_map(&phys_cpu_present_map, &phys_id_present_map); + + /* + * Set the IOAPIC ID to the value stored in the MPC table. + */ + for_each_ioapic(ioapic_idx) { + /* Read the register 0 value */ + raw_spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(ioapic_idx, 0); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + old_id = mpc_ioapic_id(ioapic_idx); + + if (mpc_ioapic_id(ioapic_idx) >= get_physical_broadcast()) { + printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", + ioapic_idx, mpc_ioapic_id(ioapic_idx)); + printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", + reg_00.bits.ID); + ioapics[ioapic_idx].mp_config.apicid = reg_00.bits.ID; + } + + /* + * Sanity check, is the ID really free? Every APIC in a + * system must have a unique ID or we get lots of nice + * 'stuck on smp_invalidate_needed IPI wait' messages. + */ + if (apic->check_apicid_used(&phys_id_present_map, + mpc_ioapic_id(ioapic_idx))) { + printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", + ioapic_idx, mpc_ioapic_id(ioapic_idx)); + for (i = 0; i < get_physical_broadcast(); i++) + if (!physid_isset(i, phys_id_present_map)) + break; + if (i >= get_physical_broadcast()) + panic("Max APIC ID exceeded!\n"); + printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", + i); + physid_set(i, phys_id_present_map); + ioapics[ioapic_idx].mp_config.apicid = i; + } else { + apic_printk(APIC_VERBOSE, "Setting %d in the phys_id_present_map\n", + mpc_ioapic_id(ioapic_idx)); + physid_set(mpc_ioapic_id(ioapic_idx), phys_id_present_map); + } + + /* + * We need to adjust the IRQ routing table + * if the ID changed. + */ + if (old_id != mpc_ioapic_id(ioapic_idx)) + for (i = 0; i < mp_irq_entries; i++) + if (mp_irqs[i].dstapic == old_id) + mp_irqs[i].dstapic + = mpc_ioapic_id(ioapic_idx); + + /* + * Update the ID register according to the right value + * from the MPC table if they are different. + */ + if (mpc_ioapic_id(ioapic_idx) == reg_00.bits.ID) + continue; + + apic_printk(APIC_VERBOSE, KERN_INFO + "...changing IO-APIC physical APIC ID to %d ...", + mpc_ioapic_id(ioapic_idx)); + + reg_00.bits.ID = mpc_ioapic_id(ioapic_idx); + raw_spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(ioapic_idx, 0, reg_00.raw); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + /* + * Sanity check + */ + raw_spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(ioapic_idx, 0); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx)) + pr_cont("could not set ID!\n"); + else + apic_printk(APIC_VERBOSE, " ok.\n"); + } +} + +void __init setup_ioapic_ids_from_mpc(void) +{ + + if (acpi_ioapic) + return; + /* + * Don't check I/O APIC IDs for xAPIC systems. They have + * no meaning without the serial APIC bus. + */ + if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) + || APIC_XAPIC(boot_cpu_apic_version)) + return; + setup_ioapic_ids_from_mpc_nocheck(); +} +#endif + +int no_timer_check __initdata; + +static int __init notimercheck(char *s) +{ + no_timer_check = 1; + return 1; +} +__setup("no_timer_check", notimercheck); + +static void __init delay_with_tsc(void) +{ + unsigned long long start, now; + unsigned long end = jiffies + 4; + + start = rdtsc(); + + /* + * We don't know the TSC frequency yet, but waiting for + * 40000000000/HZ TSC cycles is safe: + * 4 GHz == 10 jiffies + * 1 GHz == 40 jiffies + */ + do { + rep_nop(); + now = rdtsc(); + } while ((now - start) < 40000000000ULL / HZ && + time_before_eq(jiffies, end)); +} + +static void __init delay_without_tsc(void) +{ + unsigned long end = jiffies + 4; + int band = 1; + + /* + * We don't know any frequency yet, but waiting for + * 40940000000/HZ cycles is safe: + * 4 GHz == 10 jiffies + * 1 GHz == 40 jiffies + * 1 << 1 + 1 << 2 +...+ 1 << 11 = 4094 + */ + do { + __delay(((1U << band++) * 10000000UL) / HZ); + } while (band < 12 && time_before_eq(jiffies, end)); +} + +/* + * There is a nasty bug in some older SMP boards, their mptable lies + * about the timer IRQ. We do the following to work around the situation: + * + * - timer IRQ defaults to IO-APIC IRQ + * - if this function detects that timer IRQs are defunct, then we fall + * back to ISA timer IRQs + */ +static int __init timer_irq_works(void) +{ + unsigned long t1 = jiffies; + + if (no_timer_check) + return 1; + + local_irq_enable(); + if (boot_cpu_has(X86_FEATURE_TSC)) + delay_with_tsc(); + else + delay_without_tsc(); + + /* + * Expect a few ticks at least, to be sure some possible + * glue logic does not lock up after one or two first + * ticks in a non-ExtINT mode. Also the local APIC + * might have cached one ExtINT interrupt. Finally, at + * least one tick may be lost due to delays. + */ + + local_irq_disable(); + + /* Did jiffies advance? */ + return time_after(jiffies, t1 + 4); +} + +/* + * In the SMP+IOAPIC case it might happen that there are an unspecified + * number of pending IRQ events unhandled. These cases are very rare, + * so we 'resend' these IRQs via IPIs, to the same CPU. It's much + * better to do it this way as thus we do not have to be aware of + * 'pending' interrupts in the IRQ path, except at this point. + */ +/* + * Edge triggered needs to resend any interrupt + * that was delayed but this is now handled in the device + * independent code. + */ + +/* + * Starting up a edge-triggered IO-APIC interrupt is + * nasty - we need to make sure that we get the edge. + * If it is already asserted for some reason, we need + * return 1 to indicate that is was pending. + * + * This is not complete - we should be able to fake + * an edge even if it isn't on the 8259A... + */ +static unsigned int startup_ioapic_irq(struct irq_data *data) +{ + int was_pending = 0, irq = data->irq; + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + if (irq < nr_legacy_irqs()) { + legacy_pic->mask(irq); + if (legacy_pic->irq_pending(irq)) + was_pending = 1; + } + __unmask_ioapic(data->chip_data); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + return was_pending; +} + +atomic_t irq_mis_count; + +#ifdef CONFIG_GENERIC_PENDING_IRQ +static bool io_apic_level_ack_pending(struct mp_chip_data *data) +{ + struct irq_pin_list *entry; + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + for_each_irq_pin(entry, data->irq_2_pin) { + struct IO_APIC_route_entry e; + int pin; + + pin = entry->pin; + e.w1 = io_apic_read(entry->apic, 0x10 + pin*2); + /* Is the remote IRR bit set? */ + if (e.irr) { + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + return true; + } + } + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + return false; +} + +static inline bool ioapic_prepare_move(struct irq_data *data) +{ + /* If we are moving the IRQ we need to mask it */ + if (unlikely(irqd_is_setaffinity_pending(data))) { + if (!irqd_irq_masked(data)) + mask_ioapic_irq(data); + return true; + } + return false; +} + +static inline void ioapic_finish_move(struct irq_data *data, bool moveit) +{ + if (unlikely(moveit)) { + /* Only migrate the irq if the ack has been received. + * + * On rare occasions the broadcast level triggered ack gets + * delayed going to ioapics, and if we reprogram the + * vector while Remote IRR is still set the irq will never + * fire again. + * + * To prevent this scenario we read the Remote IRR bit + * of the ioapic. This has two effects. + * - On any sane system the read of the ioapic will + * flush writes (and acks) going to the ioapic from + * this cpu. + * - We get to see if the ACK has actually been delivered. + * + * Based on failed experiments of reprogramming the + * ioapic entry from outside of irq context starting + * with masking the ioapic entry and then polling until + * Remote IRR was clear before reprogramming the + * ioapic I don't trust the Remote IRR bit to be + * completely accurate. + * + * However there appears to be no other way to plug + * this race, so if the Remote IRR bit is not + * accurate and is causing problems then it is a hardware bug + * and you can go talk to the chipset vendor about it. + */ + if (!io_apic_level_ack_pending(data->chip_data)) + irq_move_masked_irq(data); + /* If the IRQ is masked in the core, leave it: */ + if (!irqd_irq_masked(data)) + unmask_ioapic_irq(data); + } +} +#else +static inline bool ioapic_prepare_move(struct irq_data *data) +{ + return false; +} +static inline void ioapic_finish_move(struct irq_data *data, bool moveit) +{ +} +#endif + +static void ioapic_ack_level(struct irq_data *irq_data) +{ + struct irq_cfg *cfg = irqd_cfg(irq_data); + unsigned long v; + bool moveit; + int i; + + irq_complete_move(cfg); + moveit = ioapic_prepare_move(irq_data); + + /* + * It appears there is an erratum which affects at least version 0x11 + * of I/O APIC (that's the 82093AA and cores integrated into various + * chipsets). Under certain conditions a level-triggered interrupt is + * erroneously delivered as edge-triggered one but the respective IRR + * bit gets set nevertheless. As a result the I/O unit expects an EOI + * message but it will never arrive and further interrupts are blocked + * from the source. The exact reason is so far unknown, but the + * phenomenon was observed when two consecutive interrupt requests + * from a given source get delivered to the same CPU and the source is + * temporarily disabled in between. + * + * A workaround is to simulate an EOI message manually. We achieve it + * by setting the trigger mode to edge and then to level when the edge + * trigger mode gets detected in the TMR of a local APIC for a + * level-triggered interrupt. We mask the source for the time of the + * operation to prevent an edge-triggered interrupt escaping meanwhile. + * The idea is from Manfred Spraul. --macro + * + * Also in the case when cpu goes offline, fixup_irqs() will forward + * any unhandled interrupt on the offlined cpu to the new cpu + * destination that is handling the corresponding interrupt. This + * interrupt forwarding is done via IPI's. Hence, in this case also + * level-triggered io-apic interrupt will be seen as an edge + * interrupt in the IRR. And we can't rely on the cpu's EOI + * to be broadcasted to the IO-APIC's which will clear the remoteIRR + * corresponding to the level-triggered interrupt. Hence on IO-APIC's + * supporting EOI register, we do an explicit EOI to clear the + * remote IRR and on IO-APIC's which don't have an EOI register, + * we use the above logic (mask+edge followed by unmask+level) from + * Manfred Spraul to clear the remote IRR. + */ + i = cfg->vector; + v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1)); + + /* + * We must acknowledge the irq before we move it or the acknowledge will + * not propagate properly. + */ + apic_eoi(); + + /* + * Tail end of clearing remote IRR bit (either by delivering the EOI + * message via io-apic EOI register write or simulating it using + * mask+edge followed by unmask+level logic) manually when the + * level triggered interrupt is seen as the edge triggered interrupt + * at the cpu. + */ + if (!(v & (1 << (i & 0x1f)))) { + atomic_inc(&irq_mis_count); + eoi_ioapic_pin(cfg->vector, irq_data->chip_data); + } + + ioapic_finish_move(irq_data, moveit); +} + +static void ioapic_ir_ack_level(struct irq_data *irq_data) +{ + struct mp_chip_data *data = irq_data->chip_data; + + /* + * Intr-remapping uses pin number as the virtual vector + * in the RTE. Actual vector is programmed in + * intr-remapping table entry. Hence for the io-apic + * EOI we use the pin number. + */ + apic_ack_irq(irq_data); + eoi_ioapic_pin(data->entry.vector, data); +} + +/* + * The I/OAPIC is just a device for generating MSI messages from legacy + * interrupt pins. Various fields of the RTE translate into bits of the + * resulting MSI which had a historical meaning. + * + * With interrupt remapping, many of those bits have different meanings + * in the underlying MSI, but the way that the I/OAPIC transforms them + * from its RTE to the MSI message is the same. This function allows + * the parent IRQ domain to compose the MSI message, then takes the + * relevant bits to put them in the appropriate places in the RTE in + * order to generate that message when the IRQ happens. + * + * The setup here relies on a preconfigured route entry (is_level, + * active_low, masked) because the parent domain is merely composing the + * generic message routing information which is used for the MSI. + */ +static void ioapic_setup_msg_from_msi(struct irq_data *irq_data, + struct IO_APIC_route_entry *entry) +{ + struct msi_msg msg; + + /* Let the parent domain compose the MSI message */ + irq_chip_compose_msi_msg(irq_data, &msg); + + /* + * - Real vector + * - DMAR/IR: 8bit subhandle (ioapic.pin) + * - AMD/IR: 8bit IRTE index + */ + entry->vector = msg.arch_data.vector; + /* Delivery mode (for DMAR/IR all 0) */ + entry->delivery_mode = msg.arch_data.delivery_mode; + /* Destination mode or DMAR/IR index bit 15 */ + entry->dest_mode_logical = msg.arch_addr_lo.dest_mode_logical; + /* DMAR/IR: 1, 0 for all other modes */ + entry->ir_format = msg.arch_addr_lo.dmar_format; + /* + * - DMAR/IR: index bit 0-14. + * + * - Virt: If the host supports x2apic without a virtualized IR + * unit then bit 0-6 of dmar_index_0_14 are providing bit + * 8-14 of the destination id. + * + * All other modes have bit 0-6 of dmar_index_0_14 cleared and the + * topmost 8 bits are destination id bit 0-7 (entry::destid_0_7). + */ + entry->ir_index_0_14 = msg.arch_addr_lo.dmar_index_0_14; +} + +static void ioapic_configure_entry(struct irq_data *irqd) +{ + struct mp_chip_data *mpd = irqd->chip_data; + struct irq_pin_list *entry; + + ioapic_setup_msg_from_msi(irqd, &mpd->entry); + + for_each_irq_pin(entry, mpd->irq_2_pin) + __ioapic_write_entry(entry->apic, entry->pin, mpd->entry); +} + +static int ioapic_set_affinity(struct irq_data *irq_data, + const struct cpumask *mask, bool force) +{ + struct irq_data *parent = irq_data->parent_data; + unsigned long flags; + int ret; + + ret = parent->chip->irq_set_affinity(parent, mask, force); + raw_spin_lock_irqsave(&ioapic_lock, flags); + if (ret >= 0 && ret != IRQ_SET_MASK_OK_DONE) + ioapic_configure_entry(irq_data); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + return ret; +} + +/* + * Interrupt shutdown masks the ioapic pin, but the interrupt might already + * be in flight, but not yet serviced by the target CPU. That means + * __synchronize_hardirq() would return and claim that everything is calmed + * down. So free_irq() would proceed and deactivate the interrupt and free + * resources. + * + * Once the target CPU comes around to service it it will find a cleared + * vector and complain. While the spurious interrupt is harmless, the full + * release of resources might prevent the interrupt from being acknowledged + * which keeps the hardware in a weird state. + * + * Verify that the corresponding Remote-IRR bits are clear. + */ +static int ioapic_irq_get_chip_state(struct irq_data *irqd, + enum irqchip_irq_state which, + bool *state) +{ + struct mp_chip_data *mcd = irqd->chip_data; + struct IO_APIC_route_entry rentry; + struct irq_pin_list *p; + + if (which != IRQCHIP_STATE_ACTIVE) + return -EINVAL; + + *state = false; + raw_spin_lock(&ioapic_lock); + for_each_irq_pin(p, mcd->irq_2_pin) { + rentry = __ioapic_read_entry(p->apic, p->pin); + /* + * The remote IRR is only valid in level trigger mode. It's + * meaning is undefined for edge triggered interrupts and + * irrelevant because the IO-APIC treats them as fire and + * forget. + */ + if (rentry.irr && rentry.is_level) { + *state = true; + break; + } + } + raw_spin_unlock(&ioapic_lock); + return 0; +} + +static struct irq_chip ioapic_chip __read_mostly = { + .name = "IO-APIC", + .irq_startup = startup_ioapic_irq, + .irq_mask = mask_ioapic_irq, + .irq_unmask = unmask_ioapic_irq, + .irq_ack = irq_chip_ack_parent, + .irq_eoi = ioapic_ack_level, + .irq_set_affinity = ioapic_set_affinity, + .irq_retrigger = irq_chip_retrigger_hierarchy, + .irq_get_irqchip_state = ioapic_irq_get_chip_state, + .flags = IRQCHIP_SKIP_SET_WAKE | + IRQCHIP_AFFINITY_PRE_STARTUP, +}; + +static struct irq_chip ioapic_ir_chip __read_mostly = { + .name = "IR-IO-APIC", + .irq_startup = startup_ioapic_irq, + .irq_mask = mask_ioapic_irq, + .irq_unmask = unmask_ioapic_irq, + .irq_ack = irq_chip_ack_parent, + .irq_eoi = ioapic_ir_ack_level, + .irq_set_affinity = ioapic_set_affinity, + .irq_retrigger = irq_chip_retrigger_hierarchy, + .irq_get_irqchip_state = ioapic_irq_get_chip_state, + .flags = IRQCHIP_SKIP_SET_WAKE | + IRQCHIP_AFFINITY_PRE_STARTUP, +}; + +static inline void init_IO_APIC_traps(void) +{ + struct irq_cfg *cfg; + unsigned int irq; + + for_each_active_irq(irq) { + cfg = irq_cfg(irq); + if (IO_APIC_IRQ(irq) && cfg && !cfg->vector) { + /* + * Hmm.. We don't have an entry for this, + * so default to an old-fashioned 8259 + * interrupt if we can.. + */ + if (irq < nr_legacy_irqs()) + legacy_pic->make_irq(irq); + else + /* Strange. Oh, well.. */ + irq_set_chip(irq, &no_irq_chip); + } + } +} + +/* + * The local APIC irq-chip implementation: + */ + +static void mask_lapic_irq(struct irq_data *data) +{ + unsigned long v; + + v = apic_read(APIC_LVT0); + apic_write(APIC_LVT0, v | APIC_LVT_MASKED); +} + +static void unmask_lapic_irq(struct irq_data *data) +{ + unsigned long v; + + v = apic_read(APIC_LVT0); + apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED); +} + +static void ack_lapic_irq(struct irq_data *data) +{ + apic_eoi(); +} + +static struct irq_chip lapic_chip __read_mostly = { + .name = "local-APIC", + .irq_mask = mask_lapic_irq, + .irq_unmask = unmask_lapic_irq, + .irq_ack = ack_lapic_irq, +}; + +static void lapic_register_intr(int irq) +{ + irq_clear_status_flags(irq, IRQ_LEVEL); + irq_set_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq, + "edge"); +} + +/* + * This looks a bit hackish but it's about the only one way of sending + * a few INTA cycles to 8259As and any associated glue logic. ICR does + * not support the ExtINT mode, unfortunately. We need to send these + * cycles as some i82489DX-based boards have glue logic that keeps the + * 8259A interrupt line asserted until INTA. --macro + */ +static inline void __init unlock_ExtINT_logic(void) +{ + int apic, pin, i; + struct IO_APIC_route_entry entry0, entry1; + unsigned char save_control, save_freq_select; + u32 apic_id; + + pin = find_isa_irq_pin(8, mp_INT); + if (pin == -1) { + WARN_ON_ONCE(1); + return; + } + apic = find_isa_irq_apic(8, mp_INT); + if (apic == -1) { + WARN_ON_ONCE(1); + return; + } + + entry0 = ioapic_read_entry(apic, pin); + clear_IO_APIC_pin(apic, pin); + + apic_id = read_apic_id(); + memset(&entry1, 0, sizeof(entry1)); + + entry1.dest_mode_logical = true; + entry1.masked = false; + entry1.destid_0_7 = apic_id & 0xFF; + entry1.virt_destid_8_14 = apic_id >> 8; + entry1.delivery_mode = APIC_DELIVERY_MODE_EXTINT; + entry1.active_low = entry0.active_low; + entry1.is_level = false; + entry1.vector = 0; + + ioapic_write_entry(apic, pin, entry1); + + save_control = CMOS_READ(RTC_CONTROL); + save_freq_select = CMOS_READ(RTC_FREQ_SELECT); + CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6, + RTC_FREQ_SELECT); + CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL); + + i = 100; + while (i-- > 0) { + mdelay(10); + if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF) + i -= 10; + } + + CMOS_WRITE(save_control, RTC_CONTROL); + CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + clear_IO_APIC_pin(apic, pin); + + ioapic_write_entry(apic, pin, entry0); +} + +static int disable_timer_pin_1 __initdata; +/* Actually the next is obsolete, but keep it for paranoid reasons -AK */ +static int __init disable_timer_pin_setup(char *arg) +{ + disable_timer_pin_1 = 1; + return 0; +} +early_param("disable_timer_pin_1", disable_timer_pin_setup); + +static int mp_alloc_timer_irq(int ioapic, int pin) +{ + int irq = -1; + struct irq_domain *domain = mp_ioapic_irqdomain(ioapic); + + if (domain) { + struct irq_alloc_info info; + + ioapic_set_alloc_attr(&info, NUMA_NO_NODE, 0, 0); + info.devid = mpc_ioapic_id(ioapic); + info.ioapic.pin = pin; + mutex_lock(&ioapic_mutex); + irq = alloc_isa_irq_from_domain(domain, 0, ioapic, pin, &info); + mutex_unlock(&ioapic_mutex); + } + + return irq; +} + +/* + * This code may look a bit paranoid, but it's supposed to cooperate with + * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ + * is so screwy. Thanks to Brian Perkins for testing/hacking this beast + * fanatically on his truly buggy board. + * + * FIXME: really need to revamp this for all platforms. + */ +static inline void __init check_timer(void) +{ + struct irq_data *irq_data = irq_get_irq_data(0); + struct mp_chip_data *data = irq_data->chip_data; + struct irq_cfg *cfg = irqd_cfg(irq_data); + int node = cpu_to_node(0); + int apic1, pin1, apic2, pin2; + int no_pin1 = 0; + + if (!global_clock_event) + return; + + local_irq_disable(); + + /* + * get/set the timer IRQ vector: + */ + legacy_pic->mask(0); + + /* + * As IRQ0 is to be enabled in the 8259A, the virtual + * wire has to be disabled in the local APIC. Also + * timer interrupts need to be acknowledged manually in + * the 8259A for the i82489DX when using the NMI + * watchdog as that APIC treats NMIs as level-triggered. + * The AEOI mode will finish them in the 8259A + * automatically. + */ + apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); + legacy_pic->init(1); + + pin1 = find_isa_irq_pin(0, mp_INT); + apic1 = find_isa_irq_apic(0, mp_INT); + pin2 = ioapic_i8259.pin; + apic2 = ioapic_i8259.apic; + + apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X " + "apic1=%d pin1=%d apic2=%d pin2=%d\n", + cfg->vector, apic1, pin1, apic2, pin2); + + /* + * Some BIOS writers are clueless and report the ExtINTA + * I/O APIC input from the cascaded 8259A as the timer + * interrupt input. So just in case, if only one pin + * was found above, try it both directly and through the + * 8259A. + */ + if (pin1 == -1) { + panic_if_irq_remap("BIOS bug: timer not connected to IO-APIC"); + pin1 = pin2; + apic1 = apic2; + no_pin1 = 1; + } else if (pin2 == -1) { + pin2 = pin1; + apic2 = apic1; + } + + if (pin1 != -1) { + /* Ok, does IRQ0 through the IOAPIC work? */ + if (no_pin1) { + mp_alloc_timer_irq(apic1, pin1); + } else { + /* + * for edge trigger, it's already unmasked, + * so only need to unmask if it is level-trigger + * do we really have level trigger timer? + */ + int idx = find_irq_entry(apic1, pin1, mp_INT); + + if (idx != -1 && irq_is_level(idx)) + unmask_ioapic_irq(irq_get_irq_data(0)); + } + irq_domain_deactivate_irq(irq_data); + irq_domain_activate_irq(irq_data, false); + if (timer_irq_works()) { + if (disable_timer_pin_1 > 0) + clear_IO_APIC_pin(0, pin1); + goto out; + } + panic_if_irq_remap("timer doesn't work through Interrupt-remapped IO-APIC"); + clear_IO_APIC_pin(apic1, pin1); + if (!no_pin1) + apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " + "8254 timer not connected to IO-APIC\n"); + + apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer " + "(IRQ0) through the 8259A ...\n"); + apic_printk(APIC_QUIET, KERN_INFO + "..... (found apic %d pin %d) ...\n", apic2, pin2); + /* + * legacy devices should be connected to IO APIC #0 + */ + replace_pin_at_irq_node(data, node, apic1, pin1, apic2, pin2); + irq_domain_deactivate_irq(irq_data); + irq_domain_activate_irq(irq_data, false); + legacy_pic->unmask(0); + if (timer_irq_works()) { + apic_printk(APIC_QUIET, KERN_INFO "....... works.\n"); + goto out; + } + /* + * Cleanup, just in case ... + */ + legacy_pic->mask(0); + clear_IO_APIC_pin(apic2, pin2); + apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n"); + } + + apic_printk(APIC_QUIET, KERN_INFO + "...trying to set up timer as Virtual Wire IRQ...\n"); + + lapic_register_intr(0); + apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */ + legacy_pic->unmask(0); + + if (timer_irq_works()) { + apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); + goto out; + } + legacy_pic->mask(0); + apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); + apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n"); + + apic_printk(APIC_QUIET, KERN_INFO + "...trying to set up timer as ExtINT IRQ...\n"); + + legacy_pic->init(0); + legacy_pic->make_irq(0); + apic_write(APIC_LVT0, APIC_DM_EXTINT); + legacy_pic->unmask(0); + + unlock_ExtINT_logic(); + + if (timer_irq_works()) { + apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); + goto out; + } + apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n"); + if (apic_is_x2apic_enabled()) + apic_printk(APIC_QUIET, KERN_INFO + "Perhaps problem with the pre-enabled x2apic mode\n" + "Try booting with x2apic and interrupt-remapping disabled in the bios.\n"); + panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " + "report. Then try booting with the 'noapic' option.\n"); +out: + local_irq_enable(); +} + +/* + * Traditionally ISA IRQ2 is the cascade IRQ, and is not available + * to devices. However there may be an I/O APIC pin available for + * this interrupt regardless. The pin may be left unconnected, but + * typically it will be reused as an ExtINT cascade interrupt for + * the master 8259A. In the MPS case such a pin will normally be + * reported as an ExtINT interrupt in the MP table. With ACPI + * there is no provision for ExtINT interrupts, and in the absence + * of an override it would be treated as an ordinary ISA I/O APIC + * interrupt, that is edge-triggered and unmasked by default. We + * used to do this, but it caused problems on some systems because + * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using + * the same ExtINT cascade interrupt to drive the local APIC of the + * bootstrap processor. Therefore we refrain from routing IRQ2 to + * the I/O APIC in all cases now. No actual device should request + * it anyway. --macro + */ +#define PIC_IRQS (1UL << PIC_CASCADE_IR) + +static int mp_irqdomain_create(int ioapic) +{ + struct irq_domain *parent; + int hwirqs = mp_ioapic_pin_count(ioapic); + struct ioapic *ip = &ioapics[ioapic]; + struct ioapic_domain_cfg *cfg = &ip->irqdomain_cfg; + struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(ioapic); + struct fwnode_handle *fn; + struct irq_fwspec fwspec; + + if (cfg->type == IOAPIC_DOMAIN_INVALID) + return 0; + + /* Handle device tree enumerated APICs proper */ + if (cfg->dev) { + fn = of_node_to_fwnode(cfg->dev); + } else { + fn = irq_domain_alloc_named_id_fwnode("IO-APIC", mpc_ioapic_id(ioapic)); + if (!fn) + return -ENOMEM; + } + + fwspec.fwnode = fn; + fwspec.param_count = 1; + fwspec.param[0] = mpc_ioapic_id(ioapic); + + parent = irq_find_matching_fwspec(&fwspec, DOMAIN_BUS_ANY); + if (!parent) { + if (!cfg->dev) + irq_domain_free_fwnode(fn); + return -ENODEV; + } + + ip->irqdomain = irq_domain_create_hierarchy(parent, 0, hwirqs, fn, cfg->ops, + (void *)(long)ioapic); + if (!ip->irqdomain) { + /* Release fw handle if it was allocated above */ + if (!cfg->dev) + irq_domain_free_fwnode(fn); + return -ENOMEM; + } + + if (cfg->type == IOAPIC_DOMAIN_LEGACY || + cfg->type == IOAPIC_DOMAIN_STRICT) + ioapic_dynirq_base = max(ioapic_dynirq_base, + gsi_cfg->gsi_end + 1); + + return 0; +} + +static void ioapic_destroy_irqdomain(int idx) +{ + struct ioapic_domain_cfg *cfg = &ioapics[idx].irqdomain_cfg; + struct fwnode_handle *fn = ioapics[idx].irqdomain->fwnode; + + if (ioapics[idx].irqdomain) { + irq_domain_remove(ioapics[idx].irqdomain); + if (!cfg->dev) + irq_domain_free_fwnode(fn); + ioapics[idx].irqdomain = NULL; + } +} + +void __init setup_IO_APIC(void) +{ + int ioapic; + + if (ioapic_is_disabled || !nr_ioapics) + return; + + io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL; + + apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); + for_each_ioapic(ioapic) + BUG_ON(mp_irqdomain_create(ioapic)); + + /* + * Set up IO-APIC IRQ routing. + */ + x86_init.mpparse.setup_ioapic_ids(); + + sync_Arb_IDs(); + setup_IO_APIC_irqs(); + init_IO_APIC_traps(); + if (nr_legacy_irqs()) + check_timer(); + + ioapic_initialized = 1; +} + +static void resume_ioapic_id(int ioapic_idx) +{ + unsigned long flags; + union IO_APIC_reg_00 reg_00; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(ioapic_idx, 0); + if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx)) { + reg_00.bits.ID = mpc_ioapic_id(ioapic_idx); + io_apic_write(ioapic_idx, 0, reg_00.raw); + } + raw_spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void ioapic_resume(void) +{ + int ioapic_idx; + + for_each_ioapic_reverse(ioapic_idx) + resume_ioapic_id(ioapic_idx); + + restore_ioapic_entries(); +} + +static struct syscore_ops ioapic_syscore_ops = { + .suspend = save_ioapic_entries, + .resume = ioapic_resume, +}; + +static int __init ioapic_init_ops(void) +{ + register_syscore_ops(&ioapic_syscore_ops); + + return 0; +} + +device_initcall(ioapic_init_ops); + +static int io_apic_get_redir_entries(int ioapic) +{ + union IO_APIC_reg_01 reg_01; + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(ioapic, 1); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + /* The register returns the maximum index redir index + * supported, which is one less than the total number of redir + * entries. + */ + return reg_01.bits.entries + 1; +} + +unsigned int arch_dynirq_lower_bound(unsigned int from) +{ + unsigned int ret; + + /* + * dmar_alloc_hwirq() may be called before setup_IO_APIC(), so use + * gsi_top if ioapic_dynirq_base hasn't been initialized yet. + */ + ret = ioapic_dynirq_base ? : gsi_top; + + /* + * For DT enabled machines ioapic_dynirq_base is irrelevant and + * always 0. gsi_top can be 0 if there is no IO/APIC registered. + * 0 is an invalid interrupt number for dynamic allocations. Return + * @from instead. + */ + return ret ? : from; +} + +#ifdef CONFIG_X86_32 +static int io_apic_get_unique_id(int ioapic, int apic_id) +{ + union IO_APIC_reg_00 reg_00; + static physid_mask_t apic_id_map = PHYSID_MASK_NONE; + physid_mask_t tmp; + unsigned long flags; + int i = 0; + + /* + * The P4 platform supports up to 256 APIC IDs on two separate APIC + * buses (one for LAPICs, one for IOAPICs), where predecessors only + * supports up to 16 on one shared APIC bus. + * + * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full + * advantage of new APIC bus architecture. + */ + + if (physids_empty(apic_id_map)) + apic->ioapic_phys_id_map(&phys_cpu_present_map, &apic_id_map); + + raw_spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(ioapic, 0); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + if (apic_id >= get_physical_broadcast()) { + printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying " + "%d\n", ioapic, apic_id, reg_00.bits.ID); + apic_id = reg_00.bits.ID; + } + + /* + * Every APIC in a system must have a unique ID or we get lots of nice + * 'stuck on smp_invalidate_needed IPI wait' messages. + */ + if (apic->check_apicid_used(&apic_id_map, apic_id)) { + + for (i = 0; i < get_physical_broadcast(); i++) { + if (!apic->check_apicid_used(&apic_id_map, i)) + break; + } + + if (i == get_physical_broadcast()) + panic("Max apic_id exceeded!\n"); + + printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, " + "trying %d\n", ioapic, apic_id, i); + + apic_id = i; + } + + physid_set_mask_of_physid(apic_id, &tmp); + physids_or(apic_id_map, apic_id_map, tmp); + + if (reg_00.bits.ID != apic_id) { + reg_00.bits.ID = apic_id; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(ioapic, 0, reg_00.raw); + reg_00.raw = io_apic_read(ioapic, 0); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + /* Sanity check */ + if (reg_00.bits.ID != apic_id) { + pr_err("IOAPIC[%d]: Unable to change apic_id!\n", + ioapic); + return -1; + } + } + + apic_printk(APIC_VERBOSE, KERN_INFO + "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id); + + return apic_id; +} + +static u8 io_apic_unique_id(int idx, u8 id) +{ + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + !APIC_XAPIC(boot_cpu_apic_version)) + return io_apic_get_unique_id(idx, id); + else + return id; +} +#else +static u8 io_apic_unique_id(int idx, u8 id) +{ + union IO_APIC_reg_00 reg_00; + DECLARE_BITMAP(used, 256); + unsigned long flags; + u8 new_id; + int i; + + bitmap_zero(used, 256); + for_each_ioapic(i) + __set_bit(mpc_ioapic_id(i), used); + + /* Hand out the requested id if available */ + if (!test_bit(id, used)) + return id; + + /* + * Read the current id from the ioapic and keep it if + * available. + */ + raw_spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(idx, 0); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + new_id = reg_00.bits.ID; + if (!test_bit(new_id, used)) { + apic_printk(APIC_VERBOSE, KERN_INFO + "IOAPIC[%d]: Using reg apic_id %d instead of %d\n", + idx, new_id, id); + return new_id; + } + + /* + * Get the next free id and write it to the ioapic. + */ + new_id = find_first_zero_bit(used, 256); + reg_00.bits.ID = new_id; + raw_spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(idx, 0, reg_00.raw); + reg_00.raw = io_apic_read(idx, 0); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + /* Sanity check */ + BUG_ON(reg_00.bits.ID != new_id); + + return new_id; +} +#endif + +static int io_apic_get_version(int ioapic) +{ + union IO_APIC_reg_01 reg_01; + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(ioapic, 1); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + return reg_01.bits.version; +} + +/* + * This function updates target affinity of IOAPIC interrupts to include + * the CPUs which came online during SMP bringup. + */ +#define IOAPIC_RESOURCE_NAME_SIZE 11 + +static struct resource *ioapic_resources; + +static struct resource * __init ioapic_setup_resources(void) +{ + unsigned long n; + struct resource *res; + char *mem; + int i; + + if (nr_ioapics == 0) + return NULL; + + n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource); + n *= nr_ioapics; + + mem = memblock_alloc(n, SMP_CACHE_BYTES); + if (!mem) + panic("%s: Failed to allocate %lu bytes\n", __func__, n); + res = (void *)mem; + + mem += sizeof(struct resource) * nr_ioapics; + + for_each_ioapic(i) { + res[i].name = mem; + res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY; + snprintf(mem, IOAPIC_RESOURCE_NAME_SIZE, "IOAPIC %u", i); + mem += IOAPIC_RESOURCE_NAME_SIZE; + ioapics[i].iomem_res = &res[i]; + } + + ioapic_resources = res; + + return res; +} + +static void io_apic_set_fixmap(enum fixed_addresses idx, phys_addr_t phys) +{ + pgprot_t flags = FIXMAP_PAGE_NOCACHE; + + /* + * Ensure fixmaps for IO-APIC MMIO respect memory encryption pgprot + * bits, just like normal ioremap(): + */ + if (cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT)) { + if (x86_platform.hyper.is_private_mmio(phys)) + flags = pgprot_encrypted(flags); + else + flags = pgprot_decrypted(flags); + } + + __set_fixmap(idx, phys, flags); +} + +void __init io_apic_init_mappings(void) +{ + unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; + struct resource *ioapic_res; + int i; + + ioapic_res = ioapic_setup_resources(); + for_each_ioapic(i) { + if (smp_found_config) { + ioapic_phys = mpc_ioapic_addr(i); +#ifdef CONFIG_X86_32 + if (!ioapic_phys) { + printk(KERN_ERR + "WARNING: bogus zero IO-APIC " + "address found in MPTABLE, " + "disabling IO/APIC support!\n"); + smp_found_config = 0; + ioapic_is_disabled = true; + goto fake_ioapic_page; + } +#endif + } else { +#ifdef CONFIG_X86_32 +fake_ioapic_page: +#endif + ioapic_phys = (unsigned long)memblock_alloc(PAGE_SIZE, + PAGE_SIZE); + if (!ioapic_phys) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", + __func__, PAGE_SIZE, PAGE_SIZE); + ioapic_phys = __pa(ioapic_phys); + } + io_apic_set_fixmap(idx, ioapic_phys); + apic_printk(APIC_VERBOSE, "mapped IOAPIC to %08lx (%08lx)\n", + __fix_to_virt(idx) + (ioapic_phys & ~PAGE_MASK), + ioapic_phys); + idx++; + + ioapic_res->start = ioapic_phys; + ioapic_res->end = ioapic_phys + IO_APIC_SLOT_SIZE - 1; + ioapic_res++; + } +} + +void __init ioapic_insert_resources(void) +{ + int i; + struct resource *r = ioapic_resources; + + if (!r) { + if (nr_ioapics > 0) + printk(KERN_ERR + "IO APIC resources couldn't be allocated.\n"); + return; + } + + for_each_ioapic(i) { + insert_resource(&iomem_resource, r); + r++; + } +} + +int mp_find_ioapic(u32 gsi) +{ + int i; + + if (nr_ioapics == 0) + return -1; + + /* Find the IOAPIC that manages this GSI. */ + for_each_ioapic(i) { + struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(i); + if (gsi >= gsi_cfg->gsi_base && gsi <= gsi_cfg->gsi_end) + return i; + } + + printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); + return -1; +} + +int mp_find_ioapic_pin(int ioapic, u32 gsi) +{ + struct mp_ioapic_gsi *gsi_cfg; + + if (WARN_ON(ioapic < 0)) + return -1; + + gsi_cfg = mp_ioapic_gsi_routing(ioapic); + if (WARN_ON(gsi > gsi_cfg->gsi_end)) + return -1; + + return gsi - gsi_cfg->gsi_base; +} + +static int bad_ioapic_register(int idx) +{ + union IO_APIC_reg_00 reg_00; + union IO_APIC_reg_01 reg_01; + union IO_APIC_reg_02 reg_02; + + reg_00.raw = io_apic_read(idx, 0); + reg_01.raw = io_apic_read(idx, 1); + reg_02.raw = io_apic_read(idx, 2); + + if (reg_00.raw == -1 && reg_01.raw == -1 && reg_02.raw == -1) { + pr_warn("I/O APIC 0x%x registers return all ones, skipping!\n", + mpc_ioapic_addr(idx)); + return 1; + } + + return 0; +} + +static int find_free_ioapic_entry(void) +{ + int idx; + + for (idx = 0; idx < MAX_IO_APICS; idx++) + if (ioapics[idx].nr_registers == 0) + return idx; + + return MAX_IO_APICS; +} + +/** + * mp_register_ioapic - Register an IOAPIC device + * @id: hardware IOAPIC ID + * @address: physical address of IOAPIC register area + * @gsi_base: base of GSI associated with the IOAPIC + * @cfg: configuration information for the IOAPIC + */ +int mp_register_ioapic(int id, u32 address, u32 gsi_base, + struct ioapic_domain_cfg *cfg) +{ + bool hotplug = !!ioapic_initialized; + struct mp_ioapic_gsi *gsi_cfg; + int idx, ioapic, entries; + u32 gsi_end; + + if (!address) { + pr_warn("Bogus (zero) I/O APIC address found, skipping!\n"); + return -EINVAL; + } + for_each_ioapic(ioapic) + if (ioapics[ioapic].mp_config.apicaddr == address) { + pr_warn("address 0x%x conflicts with IOAPIC%d\n", + address, ioapic); + return -EEXIST; + } + + idx = find_free_ioapic_entry(); + if (idx >= MAX_IO_APICS) { + pr_warn("Max # of I/O APICs (%d) exceeded (found %d), skipping\n", + MAX_IO_APICS, idx); + return -ENOSPC; + } + + ioapics[idx].mp_config.type = MP_IOAPIC; + ioapics[idx].mp_config.flags = MPC_APIC_USABLE; + ioapics[idx].mp_config.apicaddr = address; + + io_apic_set_fixmap(FIX_IO_APIC_BASE_0 + idx, address); + if (bad_ioapic_register(idx)) { + clear_fixmap(FIX_IO_APIC_BASE_0 + idx); + return -ENODEV; + } + + ioapics[idx].mp_config.apicid = io_apic_unique_id(idx, id); + ioapics[idx].mp_config.apicver = io_apic_get_version(idx); + + /* + * Build basic GSI lookup table to facilitate gsi->io_apic lookups + * and to prevent reprogramming of IOAPIC pins (PCI GSIs). + */ + entries = io_apic_get_redir_entries(idx); + gsi_end = gsi_base + entries - 1; + for_each_ioapic(ioapic) { + gsi_cfg = mp_ioapic_gsi_routing(ioapic); + if ((gsi_base >= gsi_cfg->gsi_base && + gsi_base <= gsi_cfg->gsi_end) || + (gsi_end >= gsi_cfg->gsi_base && + gsi_end <= gsi_cfg->gsi_end)) { + pr_warn("GSI range [%u-%u] for new IOAPIC conflicts with GSI[%u-%u]\n", + gsi_base, gsi_end, + gsi_cfg->gsi_base, gsi_cfg->gsi_end); + clear_fixmap(FIX_IO_APIC_BASE_0 + idx); + return -ENOSPC; + } + } + gsi_cfg = mp_ioapic_gsi_routing(idx); + gsi_cfg->gsi_base = gsi_base; + gsi_cfg->gsi_end = gsi_end; + + ioapics[idx].irqdomain = NULL; + ioapics[idx].irqdomain_cfg = *cfg; + + /* + * If mp_register_ioapic() is called during early boot stage when + * walking ACPI/DT tables, it's too early to create irqdomain, + * we are still using bootmem allocator. So delay it to setup_IO_APIC(). + */ + if (hotplug) { + if (mp_irqdomain_create(idx)) { + clear_fixmap(FIX_IO_APIC_BASE_0 + idx); + return -ENOMEM; + } + alloc_ioapic_saved_registers(idx); + } + + if (gsi_cfg->gsi_end >= gsi_top) + gsi_top = gsi_cfg->gsi_end + 1; + if (nr_ioapics <= idx) + nr_ioapics = idx + 1; + + /* Set nr_registers to mark entry present */ + ioapics[idx].nr_registers = entries; + + pr_info("IOAPIC[%d]: apic_id %d, version %d, address 0x%x, GSI %d-%d\n", + idx, mpc_ioapic_id(idx), + mpc_ioapic_ver(idx), mpc_ioapic_addr(idx), + gsi_cfg->gsi_base, gsi_cfg->gsi_end); + + return 0; +} + +int mp_unregister_ioapic(u32 gsi_base) +{ + int ioapic, pin; + int found = 0; + + for_each_ioapic(ioapic) + if (ioapics[ioapic].gsi_config.gsi_base == gsi_base) { + found = 1; + break; + } + if (!found) { + pr_warn("can't find IOAPIC for GSI %d\n", gsi_base); + return -ENODEV; + } + + for_each_pin(ioapic, pin) { + u32 gsi = mp_pin_to_gsi(ioapic, pin); + int irq = mp_map_gsi_to_irq(gsi, 0, NULL); + struct mp_chip_data *data; + + if (irq >= 0) { + data = irq_get_chip_data(irq); + if (data && data->count) { + pr_warn("pin%d on IOAPIC%d is still in use.\n", + pin, ioapic); + return -EBUSY; + } + } + } + + /* Mark entry not present */ + ioapics[ioapic].nr_registers = 0; + ioapic_destroy_irqdomain(ioapic); + free_ioapic_saved_registers(ioapic); + if (ioapics[ioapic].iomem_res) + release_resource(ioapics[ioapic].iomem_res); + clear_fixmap(FIX_IO_APIC_BASE_0 + ioapic); + memset(&ioapics[ioapic], 0, sizeof(ioapics[ioapic])); + + return 0; +} + +int mp_ioapic_registered(u32 gsi_base) +{ + int ioapic; + + for_each_ioapic(ioapic) + if (ioapics[ioapic].gsi_config.gsi_base == gsi_base) + return 1; + + return 0; +} + +static void mp_irqdomain_get_attr(u32 gsi, struct mp_chip_data *data, + struct irq_alloc_info *info) +{ + if (info && info->ioapic.valid) { + data->is_level = info->ioapic.is_level; + data->active_low = info->ioapic.active_low; + } else if (__acpi_get_override_irq(gsi, &data->is_level, + &data->active_low) < 0) { + /* PCI interrupts are always active low level triggered. */ + data->is_level = true; + data->active_low = true; + } +} + +/* + * Configure the I/O-APIC specific fields in the routing entry. + * + * This is important to setup the I/O-APIC specific bits (is_level, + * active_low, masked) because the underlying parent domain will only + * provide the routing information and is oblivious of the I/O-APIC + * specific bits. + * + * The entry is just preconfigured at this point and not written into the + * RTE. This happens later during activation which will fill in the actual + * routing information. + */ +static void mp_preconfigure_entry(struct mp_chip_data *data) +{ + struct IO_APIC_route_entry *entry = &data->entry; + + memset(entry, 0, sizeof(*entry)); + entry->is_level = data->is_level; + entry->active_low = data->active_low; + /* + * Mask level triggered irqs. Edge triggered irqs are masked + * by the irq core code in case they fire. + */ + entry->masked = data->is_level; +} + +int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq, + unsigned int nr_irqs, void *arg) +{ + struct irq_alloc_info *info = arg; + struct mp_chip_data *data; + struct irq_data *irq_data; + int ret, ioapic, pin; + unsigned long flags; + + if (!info || nr_irqs > 1) + return -EINVAL; + irq_data = irq_domain_get_irq_data(domain, virq); + if (!irq_data) + return -EINVAL; + + ioapic = mp_irqdomain_ioapic_idx(domain); + pin = info->ioapic.pin; + if (irq_find_mapping(domain, (irq_hw_number_t)pin) > 0) + return -EEXIST; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, info); + if (ret < 0) { + kfree(data); + return ret; + } + + INIT_LIST_HEAD(&data->irq_2_pin); + irq_data->hwirq = info->ioapic.pin; + irq_data->chip = (domain->parent == x86_vector_domain) ? + &ioapic_chip : &ioapic_ir_chip; + irq_data->chip_data = data; + mp_irqdomain_get_attr(mp_pin_to_gsi(ioapic, pin), data, info); + + add_pin_to_irq_node(data, ioapic_alloc_attr_node(info), ioapic, pin); + + mp_preconfigure_entry(data); + mp_register_handler(virq, data->is_level); + + local_irq_save(flags); + if (virq < nr_legacy_irqs()) + legacy_pic->mask(virq); + local_irq_restore(flags); + + apic_printk(APIC_VERBOSE, KERN_DEBUG + "IOAPIC[%d]: Preconfigured routing entry (%d-%d -> IRQ %d Level:%i ActiveLow:%i)\n", + ioapic, mpc_ioapic_id(ioapic), pin, virq, + data->is_level, data->active_low); + return 0; +} + +void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq, + unsigned int nr_irqs) +{ + struct irq_data *irq_data; + struct mp_chip_data *data; + + BUG_ON(nr_irqs != 1); + irq_data = irq_domain_get_irq_data(domain, virq); + if (irq_data && irq_data->chip_data) { + data = irq_data->chip_data; + __remove_pin_from_irq(data, mp_irqdomain_ioapic_idx(domain), + (int)irq_data->hwirq); + WARN_ON(!list_empty(&data->irq_2_pin)); + kfree(irq_data->chip_data); + } + irq_domain_free_irqs_top(domain, virq, nr_irqs); +} + +int mp_irqdomain_activate(struct irq_domain *domain, + struct irq_data *irq_data, bool reserve) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + ioapic_configure_entry(irq_data); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + return 0; +} + +void mp_irqdomain_deactivate(struct irq_domain *domain, + struct irq_data *irq_data) +{ + /* It won't be called for IRQ with multiple IOAPIC pins associated */ + ioapic_mask_entry(mp_irqdomain_ioapic_idx(domain), + (int)irq_data->hwirq); +} + +int mp_irqdomain_ioapic_idx(struct irq_domain *domain) +{ + return (int)(long)domain->host_data; +} + +const struct irq_domain_ops mp_ioapic_irqdomain_ops = { + .alloc = mp_irqdomain_alloc, + .free = mp_irqdomain_free, + .activate = mp_irqdomain_activate, + .deactivate = mp_irqdomain_deactivate, +}; |