diff options
Diffstat (limited to 'arch/x86/kernel/cpu/amd.c')
-rw-r--r-- | arch/x86/kernel/cpu/amd.c | 194 |
1 files changed, 29 insertions, 165 deletions
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 0838ea579e..307302af0a 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -20,6 +20,7 @@ #include <asm/delay.h> #include <asm/debugreg.h> #include <asm/resctrl.h> +#include <asm/sev.h> #ifdef CONFIG_X86_64 # include <asm/mmconfig.h> @@ -27,13 +28,6 @@ #include "cpu.h" -/* - * nodes_per_socket: Stores the number of nodes per socket. - * Refer to Fam15h Models 00-0fh BKDG - CPUID Fn8000_001E_ECX - * Node Identifiers[10:8] - */ -static u32 nodes_per_socket = 1; - static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p) { u32 gprs[8] = { 0 }; @@ -300,97 +294,6 @@ static int nearby_node(int apicid) } #endif -/* - * Fix up topo::core_id for pre-F17h systems to be in the - * [0 .. cores_per_node - 1] range. Not really needed but - * kept so as not to break existing setups. - */ -static void legacy_fixup_core_id(struct cpuinfo_x86 *c) -{ - u32 cus_per_node; - - if (c->x86 >= 0x17) - return; - - cus_per_node = c->x86_max_cores / nodes_per_socket; - c->topo.core_id %= cus_per_node; -} - -/* - * Fixup core topology information for - * (1) AMD multi-node processors - * Assumption: Number of cores in each internal node is the same. - * (2) AMD processors supporting compute units - */ -static void amd_get_topology(struct cpuinfo_x86 *c) -{ - /* get information required for multi-node processors */ - if (boot_cpu_has(X86_FEATURE_TOPOEXT)) { - int err; - u32 eax, ebx, ecx, edx; - - cpuid(0x8000001e, &eax, &ebx, &ecx, &edx); - - c->topo.die_id = ecx & 0xff; - - if (c->x86 == 0x15) - c->topo.cu_id = ebx & 0xff; - - if (c->x86 >= 0x17) { - c->topo.core_id = ebx & 0xff; - - if (smp_num_siblings > 1) - c->x86_max_cores /= smp_num_siblings; - } - - /* - * In case leaf B is available, use it to derive - * topology information. - */ - err = detect_extended_topology(c); - if (!err) - c->x86_coreid_bits = get_count_order(c->x86_max_cores); - - cacheinfo_amd_init_llc_id(c); - - } else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) { - u64 value; - - rdmsrl(MSR_FAM10H_NODE_ID, value); - c->topo.die_id = value & 7; - c->topo.llc_id = c->topo.die_id; - } else - return; - - if (nodes_per_socket > 1) { - set_cpu_cap(c, X86_FEATURE_AMD_DCM); - legacy_fixup_core_id(c); - } -} - -/* - * On a AMD dual core setup the lower bits of the APIC id distinguish the cores. - * Assumes number of cores is a power of two. - */ -static void amd_detect_cmp(struct cpuinfo_x86 *c) -{ - unsigned bits; - - bits = c->x86_coreid_bits; - /* Low order bits define the core id (index of core in socket) */ - c->topo.core_id = c->topo.initial_apicid & ((1 << bits)-1); - /* Convert the initial APIC ID into the socket ID */ - c->topo.pkg_id = c->topo.initial_apicid >> bits; - /* use socket ID also for last level cache */ - c->topo.llc_id = c->topo.die_id = c->topo.pkg_id; -} - -u32 amd_get_nodes_per_socket(void) -{ - return nodes_per_socket; -} -EXPORT_SYMBOL_GPL(amd_get_nodes_per_socket); - static void srat_detect_node(struct cpuinfo_x86 *c) { #ifdef CONFIG_NUMA @@ -442,29 +345,25 @@ static void srat_detect_node(struct cpuinfo_x86 *c) #endif } -static void early_init_amd_mc(struct cpuinfo_x86 *c) +static void bsp_determine_snp(struct cpuinfo_x86 *c) { -#ifdef CONFIG_SMP - unsigned bits, ecx; - - /* Multi core CPU? */ - if (c->extended_cpuid_level < 0x80000008) - return; +#ifdef CONFIG_ARCH_HAS_CC_PLATFORM + cc_vendor = CC_VENDOR_AMD; - ecx = cpuid_ecx(0x80000008); - - c->x86_max_cores = (ecx & 0xff) + 1; - - /* CPU telling us the core id bits shift? */ - bits = (ecx >> 12) & 0xF; - - /* Otherwise recompute */ - if (bits == 0) { - while ((1 << bits) < c->x86_max_cores) - bits++; + if (cpu_has(c, X86_FEATURE_SEV_SNP)) { + /* + * RMP table entry format is not architectural and is defined by the + * per-processor PPR. Restrict SNP support on the known CPU models + * for which the RMP table entry format is currently defined for. + */ + if (!cpu_has(c, X86_FEATURE_HYPERVISOR) && + c->x86 >= 0x19 && snp_probe_rmptable_info()) { + cc_platform_set(CC_ATTR_HOST_SEV_SNP); + } else { + setup_clear_cpu_cap(X86_FEATURE_SEV_SNP); + cc_platform_clear(CC_ATTR_HOST_SEV_SNP); + } } - - c->x86_coreid_bits = bits; #endif } @@ -500,18 +399,6 @@ static void bsp_init_amd(struct cpuinfo_x86 *c) if (cpu_has(c, X86_FEATURE_MWAITX)) use_mwaitx_delay(); - if (boot_cpu_has(X86_FEATURE_TOPOEXT)) { - u32 ecx; - - ecx = cpuid_ecx(0x8000001e); - __max_die_per_package = nodes_per_socket = ((ecx >> 8) & 7) + 1; - } else if (boot_cpu_has(X86_FEATURE_NODEID_MSR)) { - u64 value; - - rdmsrl(MSR_FAM10H_NODE_ID, value); - __max_die_per_package = nodes_per_socket = ((value >> 3) & 7) + 1; - } - if (!boot_cpu_has(X86_FEATURE_AMD_SSBD) && !boot_cpu_has(X86_FEATURE_VIRT_SSBD) && c->x86 >= 0x15 && c->x86 <= 0x17) { @@ -586,6 +473,7 @@ static void bsp_init_amd(struct cpuinfo_x86 *c) break; } + bsp_determine_snp(c); return; warn: @@ -604,8 +492,8 @@ static void early_detect_mem_encrypt(struct cpuinfo_x86 *c) * SME feature (set in scattered.c). * If the kernel has not enabled SME via any means then * don't advertise the SME feature. - * For SEV: If BIOS has not enabled SEV then don't advertise the - * SEV and SEV_ES feature (set in scattered.c). + * For SEV: If BIOS has not enabled SEV then don't advertise SEV and + * any additional functionality based on it. * * In all cases, since support for SME and SEV requires long mode, * don't advertise the feature under CONFIG_X86_32. @@ -640,16 +528,14 @@ clear_all: clear_sev: setup_clear_cpu_cap(X86_FEATURE_SEV); setup_clear_cpu_cap(X86_FEATURE_SEV_ES); + setup_clear_cpu_cap(X86_FEATURE_SEV_SNP); } } static void early_init_amd(struct cpuinfo_x86 *c) { - u64 value; u32 dummy; - early_init_amd_mc(c); - if (c->x86 >= 0xf) set_cpu_cap(c, X86_FEATURE_K8); @@ -715,23 +601,6 @@ static void early_init_amd(struct cpuinfo_x86 *c) early_detect_mem_encrypt(c); - /* Re-enable TopologyExtensions if switched off by BIOS */ - if (c->x86 == 0x15 && - (c->x86_model >= 0x10 && c->x86_model <= 0x6f) && - !cpu_has(c, X86_FEATURE_TOPOEXT)) { - - if (msr_set_bit(0xc0011005, 54) > 0) { - rdmsrl(0xc0011005, value); - if (value & BIT_64(54)) { - set_cpu_cap(c, X86_FEATURE_TOPOEXT); - pr_info_once(FW_INFO "CPU: Re-enabling disabled Topology Extensions Support.\n"); - } - } - } - - if (cpu_has(c, X86_FEATURE_TOPOEXT)) - smp_num_siblings = ((cpuid_ebx(0x8000001e) >> 8) & 0xff) + 1; - if (!cpu_has(c, X86_FEATURE_HYPERVISOR) && !cpu_has(c, X86_FEATURE_IBPB_BRTYPE)) { if (c->x86 == 0x17 && boot_cpu_has(X86_FEATURE_AMD_IBPB)) setup_force_cpu_cap(X86_FEATURE_IBPB_BRTYPE); @@ -940,7 +809,7 @@ static void fix_erratum_1386(struct cpuinfo_x86 *c) void init_spectral_chicken(struct cpuinfo_x86 *c) { -#ifdef CONFIG_CPU_UNRET_ENTRY +#ifdef CONFIG_MITIGATION_UNRET_ENTRY u64 value; /* @@ -968,7 +837,6 @@ static void init_amd_zen_common(void) static void init_amd_zen1(struct cpuinfo_x86 *c) { - init_amd_zen_common(); fix_erratum_1386(c); /* Fix up CPUID bits, but only if not virtualised. */ @@ -1022,7 +890,6 @@ static void zen2_zenbleed_check(struct cpuinfo_x86 *c) static void init_amd_zen2(struct cpuinfo_x86 *c) { - init_amd_zen_common(); init_spectral_chicken(c); fix_erratum_1386(c); zen2_zenbleed_check(c); @@ -1030,8 +897,6 @@ static void init_amd_zen2(struct cpuinfo_x86 *c) static void init_amd_zen3(struct cpuinfo_x86 *c) { - init_amd_zen_common(); - if (!cpu_has(c, X86_FEATURE_HYPERVISOR)) { /* * Zen3 (Fam19 model < 0x10) parts are not susceptible to @@ -1045,15 +910,12 @@ static void init_amd_zen3(struct cpuinfo_x86 *c) static void init_amd_zen4(struct cpuinfo_x86 *c) { - init_amd_zen_common(); - if (!cpu_has(c, X86_FEATURE_HYPERVISOR)) msr_set_bit(MSR_ZEN4_BP_CFG, MSR_ZEN4_BP_CFG_SHARED_BTB_FIX_BIT); } static void init_amd_zen5(struct cpuinfo_x86 *c) { - init_amd_zen_common(); } static void init_amd(struct cpuinfo_x86 *c) @@ -1075,9 +937,6 @@ static void init_amd(struct cpuinfo_x86 *c) if (cpu_has(c, X86_FEATURE_FSRM)) set_cpu_cap(c, X86_FEATURE_FSRS); - /* get apicid instead of initial apic id from cpuid */ - c->topo.apicid = read_apic_id(); - /* K6s reports MCEs but don't actually have all the MSRs */ if (c->x86 < 6) clear_cpu_cap(c, X86_FEATURE_MCE); @@ -1093,6 +952,13 @@ static void init_amd(struct cpuinfo_x86 *c) case 0x16: init_amd_jg(c); break; } + /* + * Save up on some future enablement work and do common Zen + * settings. + */ + if (c->x86 >= 0x17) + init_amd_zen_common(); + if (boot_cpu_has(X86_FEATURE_ZEN1)) init_amd_zen1(c); else if (boot_cpu_has(X86_FEATURE_ZEN2)) @@ -1113,8 +979,6 @@ static void init_amd(struct cpuinfo_x86 *c) cpu_detect_cache_sizes(c); - amd_detect_cmp(c); - amd_get_topology(c); srat_detect_node(c); init_amd_cacheinfo(c); |