diff options
Diffstat (limited to 'arch/x86/kernel/head_64.S')
| -rw-r--r-- | arch/x86/kernel/head_64.S | 151 |
1 files changed, 55 insertions, 96 deletions
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index d4918d03ef..d8198fbd70 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -26,6 +26,7 @@ #include <asm/apicdef.h> #include <asm/fixmap.h> #include <asm/smp.h> +#include <asm/thread_info.h> /* * We are not able to switch in one step to the final KERNEL ADDRESS SPACE @@ -39,7 +40,6 @@ L4_START_KERNEL = l4_index(__START_KERNEL_map) L3_START_KERNEL = pud_index(__START_KERNEL_map) - .text __HEAD .code64 SYM_CODE_START_NOALIGN(startup_64) @@ -66,9 +66,7 @@ SYM_CODE_START_NOALIGN(startup_64) mov %rsi, %r15 /* Set up the stack for verify_cpu() */ - leaq (__end_init_task - PTREGS_SIZE)(%rip), %rsp - - leaq _text(%rip), %rdi + leaq (__end_init_task - TOP_OF_KERNEL_STACK_PADDING - PTREGS_SIZE)(%rip), %rsp /* Setup GSBASE to allow stack canary access for C code */ movl $MSR_GS_BASE, %ecx @@ -77,7 +75,7 @@ SYM_CODE_START_NOALIGN(startup_64) shrq $32, %rdx wrmsr - call startup_64_setup_env + call startup_64_setup_gdt_idt /* Now switch to __KERNEL_CS so IRET works reliably */ pushq $__KERNEL_CS @@ -113,13 +111,11 @@ SYM_CODE_START_NOALIGN(startup_64) call __startup_64 /* Form the CR3 value being sure to include the CR3 modifier */ - addq $(early_top_pgt - __START_KERNEL_map), %rax + leaq early_top_pgt(%rip), %rcx + addq %rcx, %rax #ifdef CONFIG_AMD_MEM_ENCRYPT mov %rax, %rdi - mov %rax, %r14 - - addq phys_base(%rip), %rdi /* * For SEV guests: Verify that the C-bit is correct. A malicious @@ -128,17 +124,23 @@ SYM_CODE_START_NOALIGN(startup_64) * the next RET instruction. */ call sev_verify_cbit +#endif /* - * Restore CR3 value without the phys_base which will be added - * below, before writing %cr3. + * Switch to early_top_pgt which still has the identity mappings + * present. */ - mov %r14, %rax -#endif + movq %rax, %cr3 - jmp 1f + /* Branch to the common startup code at its kernel virtual address */ + ANNOTATE_RETPOLINE_SAFE + jmp *0f(%rip) SYM_CODE_END(startup_64) + __INITRODATA +0: .quad common_startup_64 + + .text SYM_CODE_START(secondary_startup_64) UNWIND_HINT_END_OF_STACK ANNOTATE_NOENDBR @@ -171,22 +173,39 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) ANNOTATE_NOENDBR /* Clear %R15 which holds the boot_params pointer on the boot CPU */ - xorq %r15, %r15 + xorl %r15d, %r15d + + /* Derive the runtime physical address of init_top_pgt[] */ + movq phys_base(%rip), %rax + addq $(init_top_pgt - __START_KERNEL_map), %rax /* * Retrieve the modifier (SME encryption mask if SME is active) to be * added to the initial pgdir entry that will be programmed into CR3. */ #ifdef CONFIG_AMD_MEM_ENCRYPT - movq sme_me_mask, %rax -#else - xorq %rax, %rax + addq sme_me_mask(%rip), %rax #endif + /* + * Switch to the init_top_pgt here, away from the trampoline_pgd and + * unmap the identity mapped ranges. + */ + movq %rax, %cr3 - /* Form the CR3 value being sure to include the CR3 modifier */ - addq $(init_top_pgt - __START_KERNEL_map), %rax -1: +SYM_INNER_LABEL(common_startup_64, SYM_L_LOCAL) + UNWIND_HINT_END_OF_STACK + ANNOTATE_NOENDBR + /* + * Create a mask of CR4 bits to preserve. Omit PGE in order to flush + * global 1:1 translations from the TLBs. + * + * From the SDM: + * "If CR4.PGE is changing from 0 to 1, there were no global TLB + * entries before the execution; if CR4.PGE is changing from 1 to 0, + * there will be no global TLB entries after the execution." + */ + movl $(X86_CR4_PAE | X86_CR4_LA57), %edx #ifdef CONFIG_X86_MCE /* * Preserve CR4.MCE if the kernel will enable #MC support. @@ -195,52 +214,20 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) * configured will crash the system regardless of the CR4.MCE value set * here. */ - movq %cr4, %rcx - andl $X86_CR4_MCE, %ecx -#else - movl $0, %ecx + orl $X86_CR4_MCE, %edx #endif + movq %cr4, %rcx + andl %edx, %ecx - /* Enable PAE mode, PSE, PGE and LA57 */ - orl $(X86_CR4_PAE | X86_CR4_PSE | X86_CR4_PGE), %ecx -#ifdef CONFIG_X86_5LEVEL - testb $1, __pgtable_l5_enabled(%rip) - jz 1f - orl $X86_CR4_LA57, %ecx -1: -#endif + /* Even if ignored in long mode, set PSE uniformly on all logical CPUs. */ + btsl $X86_CR4_PSE_BIT, %ecx movq %rcx, %cr4 - /* Setup early boot stage 4-/5-level pagetables. */ - addq phys_base(%rip), %rax - /* - * Switch to new page-table - * - * For the boot CPU this switches to early_top_pgt which still has the - * identity mappings present. The secondary CPUs will switch to the - * init_top_pgt here, away from the trampoline_pgd and unmap the - * identity mapped ranges. + * Set CR4.PGE to re-enable global translations. */ - movq %rax, %cr3 - - /* - * Do a global TLB flush after the CR3 switch to make sure the TLB - * entries from the identity mapping are flushed. - */ - movq %cr4, %rcx - movq %rcx, %rax - xorq $X86_CR4_PGE, %rcx + btsl $X86_CR4_PGE_BIT, %ecx movq %rcx, %cr4 - movq %rax, %cr4 - - /* Ensure I am executing from virtual addresses */ - movq $1f, %rax - ANNOTATE_RETPOLINE_SAFE - jmp *%rax -1: - UNWIND_HINT_END_OF_STACK - ANNOTATE_NOENDBR // above #ifdef CONFIG_SMP /* @@ -297,7 +284,7 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) .Llookup_AP: /* EAX contains the APIC ID of the current CPU */ - xorq %rcx, %rcx + xorl %ecx, %ecx leaq cpuid_to_apicid(%rip), %rbx .Lfind_cpunr: @@ -428,39 +415,10 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) movq %r15, %rdi .Ljump_to_C_code: - /* - * Jump to run C code and to be on a real kernel address. - * Since we are running on identity-mapped space we have to jump - * to the full 64bit address, this is only possible as indirect - * jump. In addition we need to ensure %cs is set so we make this - * a far return. - * - * Note: do not change to far jump indirect with 64bit offset. - * - * AMD does not support far jump indirect with 64bit offset. - * AMD64 Architecture Programmer's Manual, Volume 3: states only - * JMP FAR mem16:16 FF /5 Far jump indirect, - * with the target specified by a far pointer in memory. - * JMP FAR mem16:32 FF /5 Far jump indirect, - * with the target specified by a far pointer in memory. - * - * Intel64 does support 64bit offset. - * Software Developer Manual Vol 2: states: - * FF /5 JMP m16:16 Jump far, absolute indirect, - * address given in m16:16 - * FF /5 JMP m16:32 Jump far, absolute indirect, - * address given in m16:32. - * REX.W + FF /5 JMP m16:64 Jump far, absolute indirect, - * address given in m16:64. - */ - pushq $.Lafter_lret # put return address on stack for unwinder xorl %ebp, %ebp # clear frame pointer - movq initial_code(%rip), %rax - pushq $__KERNEL_CS # set correct cs - pushq %rax # target address in negative space - lretq -.Lafter_lret: - ANNOTATE_NOENDBR + ANNOTATE_RETPOLINE_SAFE + callq *initial_code(%rip) + ud2 SYM_CODE_END(secondary_startup_64) #include "verify_cpu.S" @@ -477,7 +435,7 @@ SYM_CODE_START(soft_restart_cpu) UNWIND_HINT_END_OF_STACK /* Find the idle task stack */ - movq PER_CPU_VAR(pcpu_hot) + X86_current_task, %rcx + movq PER_CPU_VAR(pcpu_hot + X86_current_task), %rcx movq TASK_threadsp(%rcx), %rsp jmp .Ljump_to_C_code @@ -622,7 +580,7 @@ SYM_CODE_END(vc_no_ghcb) #define SYM_DATA_START_PAGE_ALIGNED(name) \ SYM_START(name, SYM_L_GLOBAL, .balign PAGE_SIZE) -#ifdef CONFIG_PAGE_TABLE_ISOLATION +#ifdef CONFIG_MITIGATION_PAGE_TABLE_ISOLATION /* * Each PGD needs to be 8k long and 8k aligned. We do not * ever go out to userspace with these, so we do not @@ -655,7 +613,8 @@ SYM_CODE_END(vc_no_ghcb) .balign 4 SYM_DATA_START_PTI_ALIGNED(early_top_pgt) - .fill 512,8,0 + .fill 511,8,0 + .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC .fill PTI_USER_PGD_FILL,8,0 SYM_DATA_END(early_top_pgt) |