summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/tsc_sync.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/tsc_sync.c')
-rw-r--r--arch/x86/kernel/tsc_sync.c528
1 files changed, 528 insertions, 0 deletions
diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c
new file mode 100644
index 0000000000..1123ef3ccf
--- /dev/null
+++ b/arch/x86/kernel/tsc_sync.c
@@ -0,0 +1,528 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * check TSC synchronization.
+ *
+ * Copyright (C) 2006, Red Hat, Inc., Ingo Molnar
+ *
+ * We check whether all boot CPUs have their TSC's synchronized,
+ * print a warning if not and turn off the TSC clock-source.
+ *
+ * The warp-check is point-to-point between two CPUs, the CPU
+ * initiating the bootup is the 'source CPU', the freshly booting
+ * CPU is the 'target CPU'.
+ *
+ * Only two CPUs may participate - they can enter in any order.
+ * ( The serial nature of the boot logic and the CPU hotplug lock
+ * protects against more than 2 CPUs entering this code. )
+ */
+#include <linux/workqueue.h>
+#include <linux/topology.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/nmi.h>
+#include <asm/tsc.h>
+
+struct tsc_adjust {
+ s64 bootval;
+ s64 adjusted;
+ unsigned long nextcheck;
+ bool warned;
+};
+
+static DEFINE_PER_CPU(struct tsc_adjust, tsc_adjust);
+static struct timer_list tsc_sync_check_timer;
+
+/*
+ * TSC's on different sockets may be reset asynchronously.
+ * This may cause the TSC ADJUST value on socket 0 to be NOT 0.
+ */
+bool __read_mostly tsc_async_resets;
+
+void mark_tsc_async_resets(char *reason)
+{
+ if (tsc_async_resets)
+ return;
+ tsc_async_resets = true;
+ pr_info("tsc: Marking TSC async resets true due to %s\n", reason);
+}
+
+void tsc_verify_tsc_adjust(bool resume)
+{
+ struct tsc_adjust *adj = this_cpu_ptr(&tsc_adjust);
+ s64 curval;
+
+ if (!boot_cpu_has(X86_FEATURE_TSC_ADJUST))
+ return;
+
+ /* Skip unnecessary error messages if TSC already unstable */
+ if (check_tsc_unstable())
+ return;
+
+ /* Rate limit the MSR check */
+ if (!resume && time_before(jiffies, adj->nextcheck))
+ return;
+
+ adj->nextcheck = jiffies + HZ;
+
+ rdmsrl(MSR_IA32_TSC_ADJUST, curval);
+ if (adj->adjusted == curval)
+ return;
+
+ /* Restore the original value */
+ wrmsrl(MSR_IA32_TSC_ADJUST, adj->adjusted);
+
+ if (!adj->warned || resume) {
+ pr_warn(FW_BUG "TSC ADJUST differs: CPU%u %lld --> %lld. Restoring\n",
+ smp_processor_id(), adj->adjusted, curval);
+ adj->warned = true;
+ }
+}
+
+/*
+ * Normally the tsc_sync will be checked every time system enters idle
+ * state, but there is still caveat that a system won't enter idle,
+ * either because it's too busy or configured purposely to not enter
+ * idle.
+ *
+ * So setup a periodic timer (every 10 minutes) to make sure the check
+ * is always on.
+ */
+
+#define SYNC_CHECK_INTERVAL (HZ * 600)
+
+static void tsc_sync_check_timer_fn(struct timer_list *unused)
+{
+ int next_cpu;
+
+ tsc_verify_tsc_adjust(false);
+
+ /* Run the check for all onlined CPUs in turn */
+ next_cpu = cpumask_next(raw_smp_processor_id(), cpu_online_mask);
+ if (next_cpu >= nr_cpu_ids)
+ next_cpu = cpumask_first(cpu_online_mask);
+
+ tsc_sync_check_timer.expires += SYNC_CHECK_INTERVAL;
+ add_timer_on(&tsc_sync_check_timer, next_cpu);
+}
+
+static int __init start_sync_check_timer(void)
+{
+ if (!cpu_feature_enabled(X86_FEATURE_TSC_ADJUST) || tsc_clocksource_reliable)
+ return 0;
+
+ timer_setup(&tsc_sync_check_timer, tsc_sync_check_timer_fn, 0);
+ tsc_sync_check_timer.expires = jiffies + SYNC_CHECK_INTERVAL;
+ add_timer(&tsc_sync_check_timer);
+
+ return 0;
+}
+late_initcall(start_sync_check_timer);
+
+static void tsc_sanitize_first_cpu(struct tsc_adjust *cur, s64 bootval,
+ unsigned int cpu, bool bootcpu)
+{
+ /*
+ * First online CPU in a package stores the boot value in the
+ * adjustment value. This value might change later via the sync
+ * mechanism. If that fails we still can yell about boot values not
+ * being consistent.
+ *
+ * On the boot cpu we just force set the ADJUST value to 0 if it's
+ * non zero. We don't do that on non boot cpus because physical
+ * hotplug should have set the ADJUST register to a value > 0 so
+ * the TSC is in sync with the already running cpus.
+ *
+ * Also don't force the ADJUST value to zero if that is a valid value
+ * for socket 0 as determined by the system arch. This is required
+ * when multiple sockets are reset asynchronously with each other
+ * and socket 0 may not have an TSC ADJUST value of 0.
+ */
+ if (bootcpu && bootval != 0) {
+ if (likely(!tsc_async_resets)) {
+ pr_warn(FW_BUG "TSC ADJUST: CPU%u: %lld force to 0\n",
+ cpu, bootval);
+ wrmsrl(MSR_IA32_TSC_ADJUST, 0);
+ bootval = 0;
+ } else {
+ pr_info("TSC ADJUST: CPU%u: %lld NOT forced to 0\n",
+ cpu, bootval);
+ }
+ }
+ cur->adjusted = bootval;
+}
+
+#ifndef CONFIG_SMP
+bool __init tsc_store_and_check_tsc_adjust(bool bootcpu)
+{
+ struct tsc_adjust *cur = this_cpu_ptr(&tsc_adjust);
+ s64 bootval;
+
+ if (!boot_cpu_has(X86_FEATURE_TSC_ADJUST))
+ return false;
+
+ /* Skip unnecessary error messages if TSC already unstable */
+ if (check_tsc_unstable())
+ return false;
+
+ rdmsrl(MSR_IA32_TSC_ADJUST, bootval);
+ cur->bootval = bootval;
+ cur->nextcheck = jiffies + HZ;
+ tsc_sanitize_first_cpu(cur, bootval, smp_processor_id(), bootcpu);
+ return false;
+}
+
+#else /* !CONFIG_SMP */
+
+/*
+ * Store and check the TSC ADJUST MSR if available
+ */
+bool tsc_store_and_check_tsc_adjust(bool bootcpu)
+{
+ struct tsc_adjust *ref, *cur = this_cpu_ptr(&tsc_adjust);
+ unsigned int refcpu, cpu = smp_processor_id();
+ struct cpumask *mask;
+ s64 bootval;
+
+ if (!boot_cpu_has(X86_FEATURE_TSC_ADJUST))
+ return false;
+
+ rdmsrl(MSR_IA32_TSC_ADJUST, bootval);
+ cur->bootval = bootval;
+ cur->nextcheck = jiffies + HZ;
+ cur->warned = false;
+
+ /*
+ * If a non-zero TSC value for socket 0 may be valid then the default
+ * adjusted value cannot assumed to be zero either.
+ */
+ if (tsc_async_resets)
+ cur->adjusted = bootval;
+
+ /*
+ * Check whether this CPU is the first in a package to come up. In
+ * this case do not check the boot value against another package
+ * because the new package might have been physically hotplugged,
+ * where TSC_ADJUST is expected to be different. When called on the
+ * boot CPU topology_core_cpumask() might not be available yet.
+ */
+ mask = topology_core_cpumask(cpu);
+ refcpu = mask ? cpumask_any_but(mask, cpu) : nr_cpu_ids;
+
+ if (refcpu >= nr_cpu_ids) {
+ tsc_sanitize_first_cpu(cur, bootval, smp_processor_id(),
+ bootcpu);
+ return false;
+ }
+
+ ref = per_cpu_ptr(&tsc_adjust, refcpu);
+ /*
+ * Compare the boot value and complain if it differs in the
+ * package.
+ */
+ if (bootval != ref->bootval)
+ printk_once(FW_BUG "TSC ADJUST differs within socket(s), fixing all errors\n");
+
+ /*
+ * The TSC_ADJUST values in a package must be the same. If the boot
+ * value on this newly upcoming CPU differs from the adjustment
+ * value of the already online CPU in this package, set it to that
+ * adjusted value.
+ */
+ if (bootval != ref->adjusted) {
+ cur->adjusted = ref->adjusted;
+ wrmsrl(MSR_IA32_TSC_ADJUST, ref->adjusted);
+ }
+ /*
+ * We have the TSCs forced to be in sync on this package. Skip sync
+ * test:
+ */
+ return true;
+}
+
+/*
+ * Entry/exit counters that make sure that both CPUs
+ * run the measurement code at once:
+ */
+static atomic_t start_count;
+static atomic_t stop_count;
+static atomic_t test_runs;
+
+/*
+ * We use a raw spinlock in this exceptional case, because
+ * we want to have the fastest, inlined, non-debug version
+ * of a critical section, to be able to prove TSC time-warps:
+ */
+static arch_spinlock_t sync_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+
+static cycles_t last_tsc;
+static cycles_t max_warp;
+static int nr_warps;
+static int random_warps;
+
+/*
+ * TSC-warp measurement loop running on both CPUs. This is not called
+ * if there is no TSC.
+ */
+static cycles_t check_tsc_warp(unsigned int timeout)
+{
+ cycles_t start, now, prev, end, cur_max_warp = 0;
+ int i, cur_warps = 0;
+
+ start = rdtsc_ordered();
+ /*
+ * The measurement runs for 'timeout' msecs:
+ */
+ end = start + (cycles_t) tsc_khz * timeout;
+
+ for (i = 0; ; i++) {
+ /*
+ * We take the global lock, measure TSC, save the
+ * previous TSC that was measured (possibly on
+ * another CPU) and update the previous TSC timestamp.
+ */
+ arch_spin_lock(&sync_lock);
+ prev = last_tsc;
+ now = rdtsc_ordered();
+ last_tsc = now;
+ arch_spin_unlock(&sync_lock);
+
+ /*
+ * Be nice every now and then (and also check whether
+ * measurement is done [we also insert a 10 million
+ * loops safety exit, so we dont lock up in case the
+ * TSC readout is totally broken]):
+ */
+ if (unlikely(!(i & 7))) {
+ if (now > end || i > 10000000)
+ break;
+ cpu_relax();
+ touch_nmi_watchdog();
+ }
+ /*
+ * Outside the critical section we can now see whether
+ * we saw a time-warp of the TSC going backwards:
+ */
+ if (unlikely(prev > now)) {
+ arch_spin_lock(&sync_lock);
+ max_warp = max(max_warp, prev - now);
+ cur_max_warp = max_warp;
+ /*
+ * Check whether this bounces back and forth. Only
+ * one CPU should observe time going backwards.
+ */
+ if (cur_warps != nr_warps)
+ random_warps++;
+ nr_warps++;
+ cur_warps = nr_warps;
+ arch_spin_unlock(&sync_lock);
+ }
+ }
+ WARN(!(now-start),
+ "Warning: zero tsc calibration delta: %Ld [max: %Ld]\n",
+ now-start, end-start);
+ return cur_max_warp;
+}
+
+/*
+ * If the target CPU coming online doesn't have any of its core-siblings
+ * online, a timeout of 20msec will be used for the TSC-warp measurement
+ * loop. Otherwise a smaller timeout of 2msec will be used, as we have some
+ * information about this socket already (and this information grows as we
+ * have more and more logical-siblings in that socket).
+ *
+ * Ideally we should be able to skip the TSC sync check on the other
+ * core-siblings, if the first logical CPU in a socket passed the sync test.
+ * But as the TSC is per-logical CPU and can potentially be modified wrongly
+ * by the bios, TSC sync test for smaller duration should be able
+ * to catch such errors. Also this will catch the condition where all the
+ * cores in the socket don't get reset at the same time.
+ */
+static inline unsigned int loop_timeout(int cpu)
+{
+ return (cpumask_weight(topology_core_cpumask(cpu)) > 1) ? 2 : 20;
+}
+
+static void tsc_sync_mark_tsc_unstable(struct work_struct *work)
+{
+ mark_tsc_unstable("check_tsc_sync_source failed");
+}
+
+static DECLARE_WORK(tsc_sync_work, tsc_sync_mark_tsc_unstable);
+
+/*
+ * The freshly booted CPU initiates this via an async SMP function call.
+ */
+static void check_tsc_sync_source(void *__cpu)
+{
+ unsigned int cpu = (unsigned long)__cpu;
+ int cpus = 2;
+
+ /*
+ * Set the maximum number of test runs to
+ * 1 if the CPU does not provide the TSC_ADJUST MSR
+ * 3 if the MSR is available, so the target can try to adjust
+ */
+ if (!boot_cpu_has(X86_FEATURE_TSC_ADJUST))
+ atomic_set(&test_runs, 1);
+ else
+ atomic_set(&test_runs, 3);
+retry:
+ /* Wait for the target to start. */
+ while (atomic_read(&start_count) != cpus - 1)
+ cpu_relax();
+
+ /*
+ * Trigger the target to continue into the measurement too:
+ */
+ atomic_inc(&start_count);
+
+ check_tsc_warp(loop_timeout(cpu));
+
+ while (atomic_read(&stop_count) != cpus-1)
+ cpu_relax();
+
+ /*
+ * If the test was successful set the number of runs to zero and
+ * stop. If not, decrement the number of runs an check if we can
+ * retry. In case of random warps no retry is attempted.
+ */
+ if (!nr_warps) {
+ atomic_set(&test_runs, 0);
+
+ pr_debug("TSC synchronization [CPU#%d -> CPU#%u]: passed\n",
+ smp_processor_id(), cpu);
+
+ } else if (atomic_dec_and_test(&test_runs) || random_warps) {
+ /* Force it to 0 if random warps brought us here */
+ atomic_set(&test_runs, 0);
+
+ pr_warn("TSC synchronization [CPU#%d -> CPU#%u]:\n",
+ smp_processor_id(), cpu);
+ pr_warn("Measured %Ld cycles TSC warp between CPUs, "
+ "turning off TSC clock.\n", max_warp);
+ if (random_warps)
+ pr_warn("TSC warped randomly between CPUs\n");
+ schedule_work(&tsc_sync_work);
+ }
+
+ /*
+ * Reset it - just in case we boot another CPU later:
+ */
+ atomic_set(&start_count, 0);
+ random_warps = 0;
+ nr_warps = 0;
+ max_warp = 0;
+ last_tsc = 0;
+
+ /*
+ * Let the target continue with the bootup:
+ */
+ atomic_inc(&stop_count);
+
+ /*
+ * Retry, if there is a chance to do so.
+ */
+ if (atomic_read(&test_runs) > 0)
+ goto retry;
+}
+
+/*
+ * Freshly booted CPUs call into this:
+ */
+void check_tsc_sync_target(void)
+{
+ struct tsc_adjust *cur = this_cpu_ptr(&tsc_adjust);
+ unsigned int cpu = smp_processor_id();
+ cycles_t cur_max_warp, gbl_max_warp;
+ int cpus = 2;
+
+ /* Also aborts if there is no TSC. */
+ if (unsynchronized_tsc())
+ return;
+
+ /*
+ * Store, verify and sanitize the TSC adjust register. If
+ * successful skip the test.
+ *
+ * The test is also skipped when the TSC is marked reliable. This
+ * is true for SoCs which have no fallback clocksource. On these
+ * SoCs the TSC is frequency synchronized, but still the TSC ADJUST
+ * register might have been wreckaged by the BIOS..
+ */
+ if (tsc_store_and_check_tsc_adjust(false) || tsc_clocksource_reliable)
+ return;
+
+ /* Kick the control CPU into the TSC synchronization function */
+ smp_call_function_single(cpumask_first(cpu_online_mask), check_tsc_sync_source,
+ (unsigned long *)(unsigned long)cpu, 0);
+retry:
+ /*
+ * Register this CPU's participation and wait for the
+ * source CPU to start the measurement:
+ */
+ atomic_inc(&start_count);
+ while (atomic_read(&start_count) != cpus)
+ cpu_relax();
+
+ cur_max_warp = check_tsc_warp(loop_timeout(cpu));
+
+ /*
+ * Store the maximum observed warp value for a potential retry:
+ */
+ gbl_max_warp = max_warp;
+
+ /*
+ * Ok, we are done:
+ */
+ atomic_inc(&stop_count);
+
+ /*
+ * Wait for the source CPU to print stuff:
+ */
+ while (atomic_read(&stop_count) != cpus)
+ cpu_relax();
+
+ /*
+ * Reset it for the next sync test:
+ */
+ atomic_set(&stop_count, 0);
+
+ /*
+ * Check the number of remaining test runs. If not zero, the test
+ * failed and a retry with adjusted TSC is possible. If zero the
+ * test was either successful or failed terminally.
+ */
+ if (!atomic_read(&test_runs))
+ return;
+
+ /*
+ * If the warp value of this CPU is 0, then the other CPU
+ * observed time going backwards so this TSC was ahead and
+ * needs to move backwards.
+ */
+ if (!cur_max_warp)
+ cur_max_warp = -gbl_max_warp;
+
+ /*
+ * Add the result to the previous adjustment value.
+ *
+ * The adjustment value is slightly off by the overhead of the
+ * sync mechanism (observed values are ~200 TSC cycles), but this
+ * really depends on CPU, node distance and frequency. So
+ * compensating for this is hard to get right. Experiments show
+ * that the warp is not longer detectable when the observed warp
+ * value is used. In the worst case the adjustment needs to go
+ * through a 3rd run for fine tuning.
+ */
+ cur->adjusted += cur_max_warp;
+
+ pr_warn("TSC ADJUST compensate: CPU%u observed %lld warp. Adjust: %lld\n",
+ cpu, cur_max_warp, cur->adjusted);
+
+ wrmsrl(MSR_IA32_TSC_ADJUST, cur->adjusted);
+ goto retry;
+
+}
+
+#endif /* CONFIG_SMP */