diff options
Diffstat (limited to 'arch/x86/xen')
| -rw-r--r-- | arch/x86/xen/enlighten.c | 32 | ||||
| -rw-r--r-- | arch/x86/xen/enlighten_pvh.c | 68 | ||||
| -rw-r--r-- | arch/x86/xen/irq.c | 2 | ||||
| -rw-r--r-- | arch/x86/xen/mmu_pv.c | 6 | ||||
| -rw-r--r-- | arch/x86/xen/setup.c | 44 | ||||
| -rw-r--r-- | arch/x86/xen/xen-ops.h | 14 |
6 files changed, 118 insertions, 48 deletions
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 3c61bb98c1..a01ca255b0 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -6,6 +6,7 @@ #include <linux/console.h> #include <linux/cpu.h> #include <linux/kexec.h> +#include <linux/memblock.h> #include <linux/slab.h> #include <linux/panic_notifier.h> @@ -350,3 +351,34 @@ void xen_arch_unregister_cpu(int num) } EXPORT_SYMBOL(xen_arch_unregister_cpu); #endif + +/* Amount of extra memory space we add to the e820 ranges */ +struct xen_memory_region xen_extra_mem[XEN_EXTRA_MEM_MAX_REGIONS] __initdata; + +void __init xen_add_extra_mem(unsigned long start_pfn, unsigned long n_pfns) +{ + unsigned int i; + + /* + * No need to check for zero size, should happen rarely and will only + * write a new entry regarded to be unused due to zero size. + */ + for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) { + /* Add new region. */ + if (xen_extra_mem[i].n_pfns == 0) { + xen_extra_mem[i].start_pfn = start_pfn; + xen_extra_mem[i].n_pfns = n_pfns; + break; + } + /* Append to existing region. */ + if (xen_extra_mem[i].start_pfn + xen_extra_mem[i].n_pfns == + start_pfn) { + xen_extra_mem[i].n_pfns += n_pfns; + break; + } + } + if (i == XEN_EXTRA_MEM_MAX_REGIONS) + printk(KERN_WARNING "Warning: not enough extra memory regions\n"); + + memblock_reserve(PFN_PHYS(start_pfn), PFN_PHYS(n_pfns)); +} diff --git a/arch/x86/xen/enlighten_pvh.c b/arch/x86/xen/enlighten_pvh.c index ada3868c02..c28f073c1d 100644 --- a/arch/x86/xen/enlighten_pvh.c +++ b/arch/x86/xen/enlighten_pvh.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/acpi.h> #include <linux/export.h> +#include <linux/mm.h> #include <xen/hvc-console.h> @@ -72,3 +73,70 @@ void __init mem_map_via_hcall(struct boot_params *boot_params_p) } boot_params_p->e820_entries = memmap.nr_entries; } + +/* + * Reserve e820 UNUSABLE regions to inflate the memory balloon. + * + * On PVH dom0 the host memory map is used, RAM regions available to dom0 are + * located as the same place as in the native memory map, but since dom0 gets + * less memory than the total amount of host RAM the ranges that can't be + * populated are converted from RAM -> UNUSABLE. Use such regions (up to the + * ratio signaled in EXTRA_MEM_RATIO) in order to inflate the balloon driver at + * boot. Doing so prevents the guest (even if just temporary) from using holes + * in the memory map in order to map grants or foreign addresses, and + * hopefully limits the risk of a clash with a device MMIO region. Ideally the + * hypervisor should notify us which memory ranges are suitable for creating + * foreign mappings, but that's not yet implemented. + */ +void __init xen_reserve_extra_memory(struct boot_params *bootp) +{ + unsigned int i, ram_pages = 0, extra_pages; + + for (i = 0; i < bootp->e820_entries; i++) { + struct boot_e820_entry *e = &bootp->e820_table[i]; + + if (e->type != E820_TYPE_RAM) + continue; + ram_pages += PFN_DOWN(e->addr + e->size) - PFN_UP(e->addr); + } + + /* Max amount of extra memory. */ + extra_pages = EXTRA_MEM_RATIO * ram_pages; + + /* + * Convert UNUSABLE ranges to RAM and reserve them for foreign mapping + * purposes. + */ + for (i = 0; i < bootp->e820_entries && extra_pages; i++) { + struct boot_e820_entry *e = &bootp->e820_table[i]; + unsigned long pages; + + if (e->type != E820_TYPE_UNUSABLE) + continue; + + pages = min(extra_pages, + PFN_DOWN(e->addr + e->size) - PFN_UP(e->addr)); + + if (pages != (PFN_DOWN(e->addr + e->size) - PFN_UP(e->addr))) { + struct boot_e820_entry *next; + + if (bootp->e820_entries == + ARRAY_SIZE(bootp->e820_table)) + /* No space left to split - skip region. */ + continue; + + /* Split entry. */ + next = e + 1; + memmove(next, e, + (bootp->e820_entries - i) * sizeof(*e)); + bootp->e820_entries++; + next->addr = PAGE_ALIGN(e->addr) + PFN_PHYS(pages); + e->size = next->addr - e->addr; + next->size -= e->size; + } + e->type = E820_TYPE_RAM; + extra_pages -= pages; + + xen_add_extra_mem(PFN_UP(e->addr), pages); + } +} diff --git a/arch/x86/xen/irq.c b/arch/x86/xen/irq.c index 6092fea7d6..39982f955c 100644 --- a/arch/x86/xen/irq.c +++ b/arch/x86/xen/irq.c @@ -45,7 +45,7 @@ static const typeof(pv_ops) xen_irq_ops __initconst = { /* Initial interrupt flag handling only called while interrupts off. */ .save_fl = __PV_IS_CALLEE_SAVE(paravirt_ret0), .irq_disable = __PV_IS_CALLEE_SAVE(paravirt_nop), - .irq_enable = __PV_IS_CALLEE_SAVE(paravirt_BUG), + .irq_enable = __PV_IS_CALLEE_SAVE(BUG_func), .safe_halt = xen_safe_halt, .halt = xen_halt, diff --git a/arch/x86/xen/mmu_pv.c b/arch/x86/xen/mmu_pv.c index b6830554ff..994aef4473 100644 --- a/arch/x86/xen/mmu_pv.c +++ b/arch/x86/xen/mmu_pv.c @@ -34,7 +34,7 @@ * would need to validate the whole pagetable before going on. * Naturally, this is quite slow. The solution is to "pin" a * pagetable, which enforces all the constraints on the pagetable even - * when it is not actively in use. This menas that Xen can be assured + * when it is not actively in use. This means that Xen can be assured * that it is still valid when you do load it into %cr3, and doesn't * need to revalidate it. * @@ -1082,7 +1082,7 @@ static void __init xen_cleanmfnmap_pud(pud_t *pud, bool unpin) pmd_t *pmd_tbl; int i; - if (pud_large(*pud)) { + if (pud_leaf(*pud)) { pa = pud_val(*pud) & PHYSICAL_PAGE_MASK; xen_free_ro_pages(pa, PUD_SIZE); return; @@ -1863,7 +1863,7 @@ static phys_addr_t __init xen_early_virt_to_phys(unsigned long vaddr) if (!pud_present(pud)) return 0; pa = pud_val(pud) & PTE_PFN_MASK; - if (pud_large(pud)) + if (pud_leaf(pud)) return pa + (vaddr & ~PUD_MASK); pmd = native_make_pmd(xen_read_phys_ulong(pa + pmd_index(vaddr) * diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index b3e3796106..380591028c 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -38,9 +38,6 @@ #define GB(x) ((uint64_t)(x) * 1024 * 1024 * 1024) -/* Amount of extra memory space we add to the e820 ranges */ -struct xen_memory_region xen_extra_mem[XEN_EXTRA_MEM_MAX_REGIONS] __initdata; - /* Number of pages released from the initial allocation. */ unsigned long xen_released_pages; @@ -64,18 +61,6 @@ static struct { } xen_remap_buf __initdata __aligned(PAGE_SIZE); static unsigned long xen_remap_mfn __initdata = INVALID_P2M_ENTRY; -/* - * The maximum amount of extra memory compared to the base size. The - * main scaling factor is the size of struct page. At extreme ratios - * of base:extra, all the base memory can be filled with page - * structures for the extra memory, leaving no space for anything - * else. - * - * 10x seems like a reasonable balance between scaling flexibility and - * leaving a practically usable system. - */ -#define EXTRA_MEM_RATIO (10) - static bool xen_512gb_limit __initdata = IS_ENABLED(CONFIG_XEN_512GB); static void __init xen_parse_512gb(void) @@ -96,35 +81,6 @@ static void __init xen_parse_512gb(void) xen_512gb_limit = val; } -static void __init xen_add_extra_mem(unsigned long start_pfn, - unsigned long n_pfns) -{ - int i; - - /* - * No need to check for zero size, should happen rarely and will only - * write a new entry regarded to be unused due to zero size. - */ - for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) { - /* Add new region. */ - if (xen_extra_mem[i].n_pfns == 0) { - xen_extra_mem[i].start_pfn = start_pfn; - xen_extra_mem[i].n_pfns = n_pfns; - break; - } - /* Append to existing region. */ - if (xen_extra_mem[i].start_pfn + xen_extra_mem[i].n_pfns == - start_pfn) { - xen_extra_mem[i].n_pfns += n_pfns; - break; - } - } - if (i == XEN_EXTRA_MEM_MAX_REGIONS) - printk(KERN_WARNING "Warning: not enough extra memory regions\n"); - - memblock_reserve(PFN_PHYS(start_pfn), PFN_PHYS(n_pfns)); -} - static void __init xen_del_extra_mem(unsigned long start_pfn, unsigned long n_pfns) { diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index a87ab36889..79cf93f2c9 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -163,4 +163,18 @@ void xen_hvm_post_suspend(int suspend_cancelled); static inline void xen_hvm_post_suspend(int suspend_cancelled) {} #endif +/* + * The maximum amount of extra memory compared to the base size. The + * main scaling factor is the size of struct page. At extreme ratios + * of base:extra, all the base memory can be filled with page + * structures for the extra memory, leaving no space for anything + * else. + * + * 10x seems like a reasonable balance between scaling flexibility and + * leaving a practically usable system. + */ +#define EXTRA_MEM_RATIO (10) + +void xen_add_extra_mem(unsigned long start_pfn, unsigned long n_pfns); + #endif /* XEN_OPS_H */ |