summaryrefslogtreecommitdiffstats
path: root/debian/patches-rt/0017-serial-amba-pl011-Use-port-lock-wrappers.patch
diff options
context:
space:
mode:
Diffstat (limited to 'debian/patches-rt/0017-serial-amba-pl011-Use-port-lock-wrappers.patch')
-rw-r--r--debian/patches-rt/0017-serial-amba-pl011-Use-port-lock-wrappers.patch327
1 files changed, 0 insertions, 327 deletions
diff --git a/debian/patches-rt/0017-serial-amba-pl011-Use-port-lock-wrappers.patch b/debian/patches-rt/0017-serial-amba-pl011-Use-port-lock-wrappers.patch
deleted file mode 100644
index 2a5e3a85ea..0000000000
--- a/debian/patches-rt/0017-serial-amba-pl011-Use-port-lock-wrappers.patch
+++ /dev/null
@@ -1,327 +0,0 @@
-From: Thomas Gleixner <tglx@linutronix.de>
-Date: Thu, 14 Sep 2023 20:43:34 +0206
-Subject: [PATCH 017/134] serial: amba-pl011: Use port lock wrappers
-Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz
-
-When a serial port is used for kernel console output, then all
-modifications to the UART registers which are done from other contexts,
-e.g. getty, termios, are interference points for the kernel console.
-
-So far this has been ignored and the printk output is based on the
-principle of hope. The rework of the console infrastructure which aims to
-support threaded and atomic consoles, requires to mark sections which
-modify the UART registers as unsafe. This allows the atomic write function
-to make informed decisions and eventually to restore operational state. It
-also allows to prevent the regular UART code from modifying UART registers
-while printk output is in progress.
-
-All modifications of UART registers are guarded by the UART port lock,
-which provides an obvious synchronization point with the console
-infrastructure.
-
-To avoid adding this functionality to all UART drivers, wrap the
-spin_[un]lock*() invocations for uart_port::lock into helper functions
-which just contain the spin_[un]lock*() invocations for now. In a
-subsequent step these helpers will gain the console synchronization
-mechanisms.
-
-Converted with coccinelle. No functional change.
-
-Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-Signed-off-by: John Ogness <john.ogness@linutronix.de>
-Link: https://lore.kernel.org/r/20230914183831.587273-18-john.ogness@linutronix.de
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
----
- drivers/tty/serial/amba-pl011.c | 72 ++++++++++++++++++++--------------------
- 1 file changed, 36 insertions(+), 36 deletions(-)
-
---- a/drivers/tty/serial/amba-pl011.c
-+++ b/drivers/tty/serial/amba-pl011.c
-@@ -347,9 +347,9 @@ static int pl011_fifo_to_tty(struct uart
- flag = TTY_FRAME;
- }
-
-- spin_unlock(&uap->port.lock);
-+ uart_port_unlock(&uap->port);
- sysrq = uart_handle_sysrq_char(&uap->port, ch & 255);
-- spin_lock(&uap->port.lock);
-+ uart_port_lock(&uap->port);
-
- if (!sysrq)
- uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
-@@ -544,7 +544,7 @@ static void pl011_dma_tx_callback(void *
- unsigned long flags;
- u16 dmacr;
-
-- spin_lock_irqsave(&uap->port.lock, flags);
-+ uart_port_lock_irqsave(&uap->port, &flags);
- if (uap->dmatx.queued)
- dma_unmap_single(dmatx->chan->device->dev, dmatx->dma,
- dmatx->len, DMA_TO_DEVICE);
-@@ -565,7 +565,7 @@ static void pl011_dma_tx_callback(void *
- if (!(dmacr & UART011_TXDMAE) || uart_tx_stopped(&uap->port) ||
- uart_circ_empty(&uap->port.state->xmit)) {
- uap->dmatx.queued = false;
-- spin_unlock_irqrestore(&uap->port.lock, flags);
-+ uart_port_unlock_irqrestore(&uap->port, flags);
- return;
- }
-
-@@ -576,7 +576,7 @@ static void pl011_dma_tx_callback(void *
- */
- pl011_start_tx_pio(uap);
-
-- spin_unlock_irqrestore(&uap->port.lock, flags);
-+ uart_port_unlock_irqrestore(&uap->port, flags);
- }
-
- /*
-@@ -1004,7 +1004,7 @@ static void pl011_dma_rx_callback(void *
- * routine to flush out the secondary DMA buffer while
- * we immediately trigger the next DMA job.
- */
-- spin_lock_irq(&uap->port.lock);
-+ uart_port_lock_irq(&uap->port);
- /*
- * Rx data can be taken by the UART interrupts during
- * the DMA irq handler. So we check the residue here.
-@@ -1020,7 +1020,7 @@ static void pl011_dma_rx_callback(void *
- ret = pl011_dma_rx_trigger_dma(uap);
-
- pl011_dma_rx_chars(uap, pending, lastbuf, false);
-- spin_unlock_irq(&uap->port.lock);
-+ uart_port_unlock_irq(&uap->port);
- /*
- * Do this check after we picked the DMA chars so we don't
- * get some IRQ immediately from RX.
-@@ -1086,11 +1086,11 @@ static void pl011_dma_rx_poll(struct tim
- if (jiffies_to_msecs(jiffies - dmarx->last_jiffies)
- > uap->dmarx.poll_timeout) {
-
-- spin_lock_irqsave(&uap->port.lock, flags);
-+ uart_port_lock_irqsave(&uap->port, &flags);
- pl011_dma_rx_stop(uap);
- uap->im |= UART011_RXIM;
- pl011_write(uap->im, uap, REG_IMSC);
-- spin_unlock_irqrestore(&uap->port.lock, flags);
-+ uart_port_unlock_irqrestore(&uap->port, flags);
-
- uap->dmarx.running = false;
- dmaengine_terminate_all(rxchan);
-@@ -1186,10 +1186,10 @@ static void pl011_dma_shutdown(struct ua
- while (pl011_read(uap, REG_FR) & uap->vendor->fr_busy)
- cpu_relax();
-
-- spin_lock_irq(&uap->port.lock);
-+ uart_port_lock_irq(&uap->port);
- uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE);
- pl011_write(uap->dmacr, uap, REG_DMACR);
-- spin_unlock_irq(&uap->port.lock);
-+ uart_port_unlock_irq(&uap->port);
-
- if (uap->using_tx_dma) {
- /* In theory, this should already be done by pl011_dma_flush_buffer */
-@@ -1370,9 +1370,9 @@ static void pl011_throttle_rx(struct uar
- {
- unsigned long flags;
-
-- spin_lock_irqsave(&port->lock, flags);
-+ uart_port_lock_irqsave(port, &flags);
- pl011_stop_rx(port);
-- spin_unlock_irqrestore(&port->lock, flags);
-+ uart_port_unlock_irqrestore(port, flags);
- }
-
- static void pl011_enable_ms(struct uart_port *port)
-@@ -1390,7 +1390,7 @@ static void pl011_rx_chars(struct uart_a
- {
- pl011_fifo_to_tty(uap);
-
-- spin_unlock(&uap->port.lock);
-+ uart_port_unlock(&uap->port);
- tty_flip_buffer_push(&uap->port.state->port);
- /*
- * If we were temporarily out of DMA mode for a while,
-@@ -1415,7 +1415,7 @@ static void pl011_rx_chars(struct uart_a
- #endif
- }
- }
-- spin_lock(&uap->port.lock);
-+ uart_port_lock(&uap->port);
- }
-
- static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
-@@ -1551,7 +1551,7 @@ static irqreturn_t pl011_int(int irq, vo
- unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
- int handled = 0;
-
-- spin_lock_irqsave(&uap->port.lock, flags);
-+ uart_port_lock_irqsave(&uap->port, &flags);
- status = pl011_read(uap, REG_RIS) & uap->im;
- if (status) {
- do {
-@@ -1581,7 +1581,7 @@ static irqreturn_t pl011_int(int irq, vo
- handled = 1;
- }
-
-- spin_unlock_irqrestore(&uap->port.lock, flags);
-+ uart_port_unlock_irqrestore(&uap->port, flags);
-
- return IRQ_RETVAL(handled);
- }
-@@ -1653,14 +1653,14 @@ static void pl011_break_ctl(struct uart_
- unsigned long flags;
- unsigned int lcr_h;
-
-- spin_lock_irqsave(&uap->port.lock, flags);
-+ uart_port_lock_irqsave(&uap->port, &flags);
- lcr_h = pl011_read(uap, REG_LCRH_TX);
- if (break_state == -1)
- lcr_h |= UART01x_LCRH_BRK;
- else
- lcr_h &= ~UART01x_LCRH_BRK;
- pl011_write(lcr_h, uap, REG_LCRH_TX);
-- spin_unlock_irqrestore(&uap->port.lock, flags);
-+ uart_port_unlock_irqrestore(&uap->port, flags);
- }
-
- #ifdef CONFIG_CONSOLE_POLL
-@@ -1799,7 +1799,7 @@ static void pl011_enable_interrupts(stru
- unsigned long flags;
- unsigned int i;
-
-- spin_lock_irqsave(&uap->port.lock, flags);
-+ uart_port_lock_irqsave(&uap->port, &flags);
-
- /* Clear out any spuriously appearing RX interrupts */
- pl011_write(UART011_RTIS | UART011_RXIS, uap, REG_ICR);
-@@ -1821,7 +1821,7 @@ static void pl011_enable_interrupts(stru
- if (!pl011_dma_rx_running(uap))
- uap->im |= UART011_RXIM;
- pl011_write(uap->im, uap, REG_IMSC);
-- spin_unlock_irqrestore(&uap->port.lock, flags);
-+ uart_port_unlock_irqrestore(&uap->port, flags);
- }
-
- static void pl011_unthrottle_rx(struct uart_port *port)
-@@ -1829,7 +1829,7 @@ static void pl011_unthrottle_rx(struct u
- struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port);
- unsigned long flags;
-
-- spin_lock_irqsave(&uap->port.lock, flags);
-+ uart_port_lock_irqsave(&uap->port, &flags);
-
- uap->im = UART011_RTIM;
- if (!pl011_dma_rx_running(uap))
-@@ -1837,7 +1837,7 @@ static void pl011_unthrottle_rx(struct u
-
- pl011_write(uap->im, uap, REG_IMSC);
-
-- spin_unlock_irqrestore(&uap->port.lock, flags);
-+ uart_port_unlock_irqrestore(&uap->port, flags);
- }
-
- static int pl011_startup(struct uart_port *port)
-@@ -1857,7 +1857,7 @@ static int pl011_startup(struct uart_por
-
- pl011_write(uap->vendor->ifls, uap, REG_IFLS);
-
-- spin_lock_irq(&uap->port.lock);
-+ uart_port_lock_irq(&uap->port);
-
- cr = pl011_read(uap, REG_CR);
- cr &= UART011_CR_RTS | UART011_CR_DTR;
-@@ -1868,7 +1868,7 @@ static int pl011_startup(struct uart_por
-
- pl011_write(cr, uap, REG_CR);
-
-- spin_unlock_irq(&uap->port.lock);
-+ uart_port_unlock_irq(&uap->port);
-
- /*
- * initialise the old status of the modem signals
-@@ -1929,12 +1929,12 @@ static void pl011_disable_uart(struct ua
- unsigned int cr;
-
- uap->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS);
-- spin_lock_irq(&uap->port.lock);
-+ uart_port_lock_irq(&uap->port);
- cr = pl011_read(uap, REG_CR);
- cr &= UART011_CR_RTS | UART011_CR_DTR;
- cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
- pl011_write(cr, uap, REG_CR);
-- spin_unlock_irq(&uap->port.lock);
-+ uart_port_unlock_irq(&uap->port);
-
- /*
- * disable break condition and fifos
-@@ -1946,14 +1946,14 @@ static void pl011_disable_uart(struct ua
-
- static void pl011_disable_interrupts(struct uart_amba_port *uap)
- {
-- spin_lock_irq(&uap->port.lock);
-+ uart_port_lock_irq(&uap->port);
-
- /* mask all interrupts and clear all pending ones */
- uap->im = 0;
- pl011_write(uap->im, uap, REG_IMSC);
- pl011_write(0xffff, uap, REG_ICR);
-
-- spin_unlock_irq(&uap->port.lock);
-+ uart_port_unlock_irq(&uap->port);
- }
-
- static void pl011_shutdown(struct uart_port *port)
-@@ -2098,7 +2098,7 @@ pl011_set_termios(struct uart_port *port
-
- bits = tty_get_frame_size(termios->c_cflag);
-
-- spin_lock_irqsave(&port->lock, flags);
-+ uart_port_lock_irqsave(port, &flags);
-
- /*
- * Update the per-port timeout.
-@@ -2172,7 +2172,7 @@ pl011_set_termios(struct uart_port *port
- old_cr |= UART011_CR_RXE;
- pl011_write(old_cr, uap, REG_CR);
-
-- spin_unlock_irqrestore(&port->lock, flags);
-+ uart_port_unlock_irqrestore(port, flags);
- }
-
- static void
-@@ -2190,10 +2190,10 @@ sbsa_uart_set_termios(struct uart_port *
- termios->c_cflag &= ~(CMSPAR | CRTSCTS);
- termios->c_cflag |= CS8 | CLOCAL;
-
-- spin_lock_irqsave(&port->lock, flags);
-+ uart_port_lock_irqsave(port, &flags);
- uart_update_timeout(port, CS8, uap->fixed_baud);
- pl011_setup_status_masks(port, termios);
-- spin_unlock_irqrestore(&port->lock, flags);
-+ uart_port_unlock_irqrestore(port, flags);
- }
-
- static const char *pl011_type(struct uart_port *port)
-@@ -2332,9 +2332,9 @@ pl011_console_write(struct console *co,
- if (uap->port.sysrq)
- locked = 0;
- else if (oops_in_progress)
-- locked = spin_trylock(&uap->port.lock);
-+ locked = uart_port_trylock(&uap->port);
- else
-- spin_lock(&uap->port.lock);
-+ uart_port_lock(&uap->port);
-
- /*
- * First save the CR then disable the interrupts
-@@ -2360,7 +2360,7 @@ pl011_console_write(struct console *co,
- pl011_write(old_cr, uap, REG_CR);
-
- if (locked)
-- spin_unlock(&uap->port.lock);
-+ uart_port_unlock(&uap->port);
- local_irq_restore(flags);
-
- clk_disable(uap->clk);
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-17 07:35:24 +0000