summaryrefslogtreecommitdiffstats
path: root/debian/patches-rt/0027-serial-fsl_lpuart-Use-port-lock-wrappers.patch
diff options
context:
space:
mode:
Diffstat (limited to 'debian/patches-rt/0027-serial-fsl_lpuart-Use-port-lock-wrappers.patch')
-rw-r--r--debian/patches-rt/0027-serial-fsl_lpuart-Use-port-lock-wrappers.patch389
1 files changed, 389 insertions, 0 deletions
diff --git a/debian/patches-rt/0027-serial-fsl_lpuart-Use-port-lock-wrappers.patch b/debian/patches-rt/0027-serial-fsl_lpuart-Use-port-lock-wrappers.patch
new file mode 100644
index 0000000000..f1475a5ffd
--- /dev/null
+++ b/debian/patches-rt/0027-serial-fsl_lpuart-Use-port-lock-wrappers.patch
@@ -0,0 +1,389 @@
+From: Thomas Gleixner <tglx@linutronix.de>
+Date: Thu, 14 Sep 2023 20:43:44 +0206
+Subject: [PATCH 027/134] serial: fsl_lpuart: Use port lock wrappers
+Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz
+
+When a serial port is used for kernel console output, then all
+modifications to the UART registers which are done from other contexts,
+e.g. getty, termios, are interference points for the kernel console.
+
+So far this has been ignored and the printk output is based on the
+principle of hope. The rework of the console infrastructure which aims to
+support threaded and atomic consoles, requires to mark sections which
+modify the UART registers as unsafe. This allows the atomic write function
+to make informed decisions and eventually to restore operational state. It
+also allows to prevent the regular UART code from modifying UART registers
+while printk output is in progress.
+
+All modifications of UART registers are guarded by the UART port lock,
+which provides an obvious synchronization point with the console
+infrastructure.
+
+To avoid adding this functionality to all UART drivers, wrap the
+spin_[un]lock*() invocations for uart_port::lock into helper functions
+which just contain the spin_[un]lock*() invocations for now. In a
+subsequent step these helpers will gain the console synchronization
+mechanisms.
+
+Converted with coccinelle. No functional change.
+
+Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
+Signed-off-by: John Ogness <john.ogness@linutronix.de>
+Link: https://lore.kernel.org/r/20230914183831.587273-28-john.ogness@linutronix.de
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+---
+ drivers/tty/serial/fsl_lpuart.c | 88 ++++++++++++++++++++--------------------
+ 1 file changed, 44 insertions(+), 44 deletions(-)
+
+--- a/drivers/tty/serial/fsl_lpuart.c
++++ b/drivers/tty/serial/fsl_lpuart.c
+@@ -532,9 +532,9 @@ static void lpuart_dma_tx_complete(void
+ struct dma_chan *chan = sport->dma_tx_chan;
+ unsigned long flags;
+
+- spin_lock_irqsave(&sport->port.lock, flags);
++ uart_port_lock_irqsave(&sport->port, &flags);
+ if (!sport->dma_tx_in_progress) {
+- spin_unlock_irqrestore(&sport->port.lock, flags);
++ uart_port_unlock_irqrestore(&sport->port, flags);
+ return;
+ }
+
+@@ -543,7 +543,7 @@ static void lpuart_dma_tx_complete(void
+
+ uart_xmit_advance(&sport->port, sport->dma_tx_bytes);
+ sport->dma_tx_in_progress = false;
+- spin_unlock_irqrestore(&sport->port.lock, flags);
++ uart_port_unlock_irqrestore(&sport->port, flags);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&sport->port);
+@@ -553,12 +553,12 @@ static void lpuart_dma_tx_complete(void
+ return;
+ }
+
+- spin_lock_irqsave(&sport->port.lock, flags);
++ uart_port_lock_irqsave(&sport->port, &flags);
+
+ if (!lpuart_stopped_or_empty(&sport->port))
+ lpuart_dma_tx(sport);
+
+- spin_unlock_irqrestore(&sport->port.lock, flags);
++ uart_port_unlock_irqrestore(&sport->port, flags);
+ }
+
+ static dma_addr_t lpuart_dma_datareg_addr(struct lpuart_port *sport)
+@@ -651,7 +651,7 @@ static int lpuart_poll_init(struct uart_
+
+ sport->port.fifosize = 0;
+
+- spin_lock_irqsave(&sport->port.lock, flags);
++ uart_port_lock_irqsave(&sport->port, &flags);
+ /* Disable Rx & Tx */
+ writeb(0, sport->port.membase + UARTCR2);
+
+@@ -675,7 +675,7 @@ static int lpuart_poll_init(struct uart_
+
+ /* Enable Rx and Tx */
+ writeb(UARTCR2_RE | UARTCR2_TE, sport->port.membase + UARTCR2);
+- spin_unlock_irqrestore(&sport->port.lock, flags);
++ uart_port_unlock_irqrestore(&sport->port, flags);
+
+ return 0;
+ }
+@@ -703,7 +703,7 @@ static int lpuart32_poll_init(struct uar
+
+ sport->port.fifosize = 0;
+
+- spin_lock_irqsave(&sport->port.lock, flags);
++ uart_port_lock_irqsave(&sport->port, &flags);
+
+ /* Disable Rx & Tx */
+ lpuart32_write(&sport->port, 0, UARTCTRL);
+@@ -724,7 +724,7 @@ static int lpuart32_poll_init(struct uar
+
+ /* Enable Rx and Tx */
+ lpuart32_write(&sport->port, UARTCTRL_RE | UARTCTRL_TE, UARTCTRL);
+- spin_unlock_irqrestore(&sport->port.lock, flags);
++ uart_port_unlock_irqrestore(&sport->port, flags);
+
+ return 0;
+ }
+@@ -879,9 +879,9 @@ static unsigned int lpuart32_tx_empty(st
+
+ static void lpuart_txint(struct lpuart_port *sport)
+ {
+- spin_lock(&sport->port.lock);
++ uart_port_lock(&sport->port);
+ lpuart_transmit_buffer(sport);
+- spin_unlock(&sport->port.lock);
++ uart_port_unlock(&sport->port);
+ }
+
+ static void lpuart_rxint(struct lpuart_port *sport)
+@@ -890,7 +890,7 @@ static void lpuart_rxint(struct lpuart_p
+ struct tty_port *port = &sport->port.state->port;
+ unsigned char rx, sr;
+
+- spin_lock(&sport->port.lock);
++ uart_port_lock(&sport->port);
+
+ while (!(readb(sport->port.membase + UARTSFIFO) & UARTSFIFO_RXEMPT)) {
+ flg = TTY_NORMAL;
+@@ -956,9 +956,9 @@ static void lpuart_rxint(struct lpuart_p
+
+ static void lpuart32_txint(struct lpuart_port *sport)
+ {
+- spin_lock(&sport->port.lock);
++ uart_port_lock(&sport->port);
+ lpuart32_transmit_buffer(sport);
+- spin_unlock(&sport->port.lock);
++ uart_port_unlock(&sport->port);
+ }
+
+ static void lpuart32_rxint(struct lpuart_port *sport)
+@@ -968,7 +968,7 @@ static void lpuart32_rxint(struct lpuart
+ unsigned long rx, sr;
+ bool is_break;
+
+- spin_lock(&sport->port.lock);
++ uart_port_lock(&sport->port);
+
+ while (!(lpuart32_read(&sport->port, UARTFIFO) & UARTFIFO_RXEMPT)) {
+ flg = TTY_NORMAL;
+@@ -1170,12 +1170,12 @@ static void lpuart_copy_rx_to_tty(struct
+
+ async_tx_ack(sport->dma_rx_desc);
+
+- spin_lock_irqsave(&sport->port.lock, flags);
++ uart_port_lock_irqsave(&sport->port, &flags);
+
+ dmastat = dmaengine_tx_status(chan, sport->dma_rx_cookie, &state);
+ if (dmastat == DMA_ERROR) {
+ dev_err(sport->port.dev, "Rx DMA transfer failed!\n");
+- spin_unlock_irqrestore(&sport->port.lock, flags);
++ uart_port_unlock_irqrestore(&sport->port, flags);
+ return;
+ }
+
+@@ -1244,7 +1244,7 @@ static void lpuart_copy_rx_to_tty(struct
+ dma_sync_sg_for_device(chan->device->dev, &sport->rx_sgl, 1,
+ DMA_FROM_DEVICE);
+
+- spin_unlock_irqrestore(&sport->port.lock, flags);
++ uart_port_unlock_irqrestore(&sport->port, flags);
+
+ tty_flip_buffer_push(port);
+ if (!sport->dma_idle_int)
+@@ -1335,9 +1335,9 @@ static void lpuart_timer_func(struct tim
+ mod_timer(&sport->lpuart_timer,
+ jiffies + sport->dma_rx_timeout);
+
+- if (spin_trylock_irqsave(&sport->port.lock, flags)) {
++ if (uart_port_trylock_irqsave(&sport->port, &flags)) {
+ sport->last_residue = state.residue;
+- spin_unlock_irqrestore(&sport->port.lock, flags);
++ uart_port_unlock_irqrestore(&sport->port, flags);
+ }
+ }
+
+@@ -1802,14 +1802,14 @@ static void lpuart_hw_setup(struct lpuar
+ {
+ unsigned long flags;
+
+- spin_lock_irqsave(&sport->port.lock, flags);
++ uart_port_lock_irqsave(&sport->port, &flags);
+
+ lpuart_setup_watermark_enable(sport);
+
+ lpuart_rx_dma_startup(sport);
+ lpuart_tx_dma_startup(sport);
+
+- spin_unlock_irqrestore(&sport->port.lock, flags);
++ uart_port_unlock_irqrestore(&sport->port, flags);
+ }
+
+ static int lpuart_startup(struct uart_port *port)
+@@ -1859,7 +1859,7 @@ static void lpuart32_hw_setup(struct lpu
+ {
+ unsigned long flags;
+
+- spin_lock_irqsave(&sport->port.lock, flags);
++ uart_port_lock_irqsave(&sport->port, &flags);
+
+ lpuart32_hw_disable(sport);
+
+@@ -1869,7 +1869,7 @@ static void lpuart32_hw_setup(struct lpu
+ lpuart32_setup_watermark_enable(sport);
+ lpuart32_configure(sport);
+
+- spin_unlock_irqrestore(&sport->port.lock, flags);
++ uart_port_unlock_irqrestore(&sport->port, flags);
+ }
+
+ static int lpuart32_startup(struct uart_port *port)
+@@ -1932,7 +1932,7 @@ static void lpuart_shutdown(struct uart_
+ unsigned char temp;
+ unsigned long flags;
+
+- spin_lock_irqsave(&port->lock, flags);
++ uart_port_lock_irqsave(port, &flags);
+
+ /* disable Rx/Tx and interrupts */
+ temp = readb(port->membase + UARTCR2);
+@@ -1940,7 +1940,7 @@ static void lpuart_shutdown(struct uart_
+ UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_RIE);
+ writeb(temp, port->membase + UARTCR2);
+
+- spin_unlock_irqrestore(&port->lock, flags);
++ uart_port_unlock_irqrestore(port, flags);
+
+ lpuart_dma_shutdown(sport);
+ }
+@@ -1952,7 +1952,7 @@ static void lpuart32_shutdown(struct uar
+ unsigned long temp;
+ unsigned long flags;
+
+- spin_lock_irqsave(&port->lock, flags);
++ uart_port_lock_irqsave(port, &flags);
+
+ /* clear status */
+ temp = lpuart32_read(&sport->port, UARTSTAT);
+@@ -1969,7 +1969,7 @@ static void lpuart32_shutdown(struct uar
+ UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE | UARTCTRL_SBK);
+ lpuart32_write(port, temp, UARTCTRL);
+
+- spin_unlock_irqrestore(&port->lock, flags);
++ uart_port_unlock_irqrestore(port, flags);
+
+ lpuart_dma_shutdown(sport);
+ }
+@@ -2069,7 +2069,7 @@ lpuart_set_termios(struct uart_port *por
+ if (old && sport->lpuart_dma_rx_use)
+ lpuart_dma_rx_free(&sport->port);
+
+- spin_lock_irqsave(&sport->port.lock, flags);
++ uart_port_lock_irqsave(&sport->port, &flags);
+
+ sport->port.read_status_mask = 0;
+ if (termios->c_iflag & INPCK)
+@@ -2124,7 +2124,7 @@ lpuart_set_termios(struct uart_port *por
+ sport->lpuart_dma_rx_use = false;
+ }
+
+- spin_unlock_irqrestore(&sport->port.lock, flags);
++ uart_port_unlock_irqrestore(&sport->port, flags);
+ }
+
+ static void __lpuart32_serial_setbrg(struct uart_port *port,
+@@ -2304,7 +2304,7 @@ lpuart32_set_termios(struct uart_port *p
+ if (old && sport->lpuart_dma_rx_use)
+ lpuart_dma_rx_free(&sport->port);
+
+- spin_lock_irqsave(&sport->port.lock, flags);
++ uart_port_lock_irqsave(&sport->port, &flags);
+
+ sport->port.read_status_mask = 0;
+ if (termios->c_iflag & INPCK)
+@@ -2359,7 +2359,7 @@ lpuart32_set_termios(struct uart_port *p
+ sport->lpuart_dma_rx_use = false;
+ }
+
+- spin_unlock_irqrestore(&sport->port.lock, flags);
++ uart_port_unlock_irqrestore(&sport->port, flags);
+ }
+
+ static const char *lpuart_type(struct uart_port *port)
+@@ -2477,9 +2477,9 @@ lpuart_console_write(struct console *co,
+ int locked = 1;
+
+ if (oops_in_progress)
+- locked = spin_trylock_irqsave(&sport->port.lock, flags);
++ locked = uart_port_trylock_irqsave(&sport->port, &flags);
+ else
+- spin_lock_irqsave(&sport->port.lock, flags);
++ uart_port_lock_irqsave(&sport->port, &flags);
+
+ /* first save CR2 and then disable interrupts */
+ cr2 = old_cr2 = readb(sport->port.membase + UARTCR2);
+@@ -2495,7 +2495,7 @@ lpuart_console_write(struct console *co,
+ writeb(old_cr2, sport->port.membase + UARTCR2);
+
+ if (locked)
+- spin_unlock_irqrestore(&sport->port.lock, flags);
++ uart_port_unlock_irqrestore(&sport->port, flags);
+ }
+
+ static void
+@@ -2507,9 +2507,9 @@ lpuart32_console_write(struct console *c
+ int locked = 1;
+
+ if (oops_in_progress)
+- locked = spin_trylock_irqsave(&sport->port.lock, flags);
++ locked = uart_port_trylock_irqsave(&sport->port, &flags);
+ else
+- spin_lock_irqsave(&sport->port.lock, flags);
++ uart_port_lock_irqsave(&sport->port, &flags);
+
+ /* first save CR2 and then disable interrupts */
+ cr = old_cr = lpuart32_read(&sport->port, UARTCTRL);
+@@ -2525,7 +2525,7 @@ lpuart32_console_write(struct console *c
+ lpuart32_write(&sport->port, old_cr, UARTCTRL);
+
+ if (locked)
+- spin_unlock_irqrestore(&sport->port.lock, flags);
++ uart_port_unlock_irqrestore(&sport->port, flags);
+ }
+
+ /*
+@@ -3089,7 +3089,7 @@ static int lpuart_suspend(struct device
+ uart_suspend_port(&lpuart_reg, &sport->port);
+
+ if (lpuart_uport_is_active(sport)) {
+- spin_lock_irqsave(&sport->port.lock, flags);
++ uart_port_lock_irqsave(&sport->port, &flags);
+ if (lpuart_is_32(sport)) {
+ /* disable Rx/Tx and interrupts */
+ temp = lpuart32_read(&sport->port, UARTCTRL);
+@@ -3101,7 +3101,7 @@ static int lpuart_suspend(struct device
+ temp &= ~(UARTCR2_TE | UARTCR2_TIE | UARTCR2_TCIE);
+ writeb(temp, sport->port.membase + UARTCR2);
+ }
+- spin_unlock_irqrestore(&sport->port.lock, flags);
++ uart_port_unlock_irqrestore(&sport->port, flags);
+
+ if (sport->lpuart_dma_rx_use) {
+ /*
+@@ -3114,7 +3114,7 @@ static int lpuart_suspend(struct device
+ lpuart_dma_rx_free(&sport->port);
+
+ /* Disable Rx DMA to use UART port as wakeup source */
+- spin_lock_irqsave(&sport->port.lock, flags);
++ uart_port_lock_irqsave(&sport->port, &flags);
+ if (lpuart_is_32(sport)) {
+ temp = lpuart32_read(&sport->port, UARTBAUD);
+ lpuart32_write(&sport->port, temp & ~UARTBAUD_RDMAE,
+@@ -3123,11 +3123,11 @@ static int lpuart_suspend(struct device
+ writeb(readb(sport->port.membase + UARTCR5) &
+ ~UARTCR5_RDMAS, sport->port.membase + UARTCR5);
+ }
+- spin_unlock_irqrestore(&sport->port.lock, flags);
++ uart_port_unlock_irqrestore(&sport->port, flags);
+ }
+
+ if (sport->lpuart_dma_tx_use) {
+- spin_lock_irqsave(&sport->port.lock, flags);
++ uart_port_lock_irqsave(&sport->port, &flags);
+ if (lpuart_is_32(sport)) {
+ temp = lpuart32_read(&sport->port, UARTBAUD);
+ temp &= ~UARTBAUD_TDMAE;
+@@ -3137,7 +3137,7 @@ static int lpuart_suspend(struct device
+ temp &= ~UARTCR5_TDMAS;
+ writeb(temp, sport->port.membase + UARTCR5);
+ }
+- spin_unlock_irqrestore(&sport->port.lock, flags);
++ uart_port_unlock_irqrestore(&sport->port, flags);
+ sport->dma_tx_in_progress = false;
+ dmaengine_terminate_sync(sport->dma_tx_chan);
+ }