summaryrefslogtreecommitdiffstats
path: root/debian/patches-rt/0040-serial-mps2-uart-Use-port-lock-wrappers.patch
diff options
context:
space:
mode:
Diffstat (limited to 'debian/patches-rt/0040-serial-mps2-uart-Use-port-lock-wrappers.patch')
-rw-r--r--debian/patches-rt/0040-serial-mps2-uart-Use-port-lock-wrappers.patch103
1 files changed, 103 insertions, 0 deletions
diff --git a/debian/patches-rt/0040-serial-mps2-uart-Use-port-lock-wrappers.patch b/debian/patches-rt/0040-serial-mps2-uart-Use-port-lock-wrappers.patch
new file mode 100644
index 0000000000..a626bdb031
--- /dev/null
+++ b/debian/patches-rt/0040-serial-mps2-uart-Use-port-lock-wrappers.patch
@@ -0,0 +1,103 @@
+From: Thomas Gleixner <tglx@linutronix.de>
+Date: Thu, 14 Sep 2023 20:43:57 +0206
+Subject: [PATCH 040/134] serial: mps2-uart: Use port lock wrappers
+Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz
+
+When a serial port is used for kernel console output, then all
+modifications to the UART registers which are done from other contexts,
+e.g. getty, termios, are interference points for the kernel console.
+
+So far this has been ignored and the printk output is based on the
+principle of hope. The rework of the console infrastructure which aims to
+support threaded and atomic consoles, requires to mark sections which
+modify the UART registers as unsafe. This allows the atomic write function
+to make informed decisions and eventually to restore operational state. It
+also allows to prevent the regular UART code from modifying UART registers
+while printk output is in progress.
+
+All modifications of UART registers are guarded by the UART port lock,
+which provides an obvious synchronization point with the console
+infrastructure.
+
+To avoid adding this functionality to all UART drivers, wrap the
+spin_[un]lock*() invocations for uart_port::lock into helper functions
+which just contain the spin_[un]lock*() invocations for now. In a
+subsequent step these helpers will gain the console synchronization
+mechanisms.
+
+Converted with coccinelle. No functional change.
+
+Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
+Signed-off-by: John Ogness <john.ogness@linutronix.de>
+Link: https://lore.kernel.org/r/20230914183831.587273-41-john.ogness@linutronix.de
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+---
+ drivers/tty/serial/mps2-uart.c | 16 ++++++++--------
+ 1 file changed, 8 insertions(+), 8 deletions(-)
+
+--- a/drivers/tty/serial/mps2-uart.c
++++ b/drivers/tty/serial/mps2-uart.c
+@@ -188,12 +188,12 @@ static irqreturn_t mps2_uart_rxirq(int i
+ if (unlikely(!(irqflag & UARTn_INT_RX)))
+ return IRQ_NONE;
+
+- spin_lock(&port->lock);
++ uart_port_lock(port);
+
+ mps2_uart_write8(port, UARTn_INT_RX, UARTn_INT);
+ mps2_uart_rx_chars(port);
+
+- spin_unlock(&port->lock);
++ uart_port_unlock(port);
+
+ return IRQ_HANDLED;
+ }
+@@ -206,12 +206,12 @@ static irqreturn_t mps2_uart_txirq(int i
+ if (unlikely(!(irqflag & UARTn_INT_TX)))
+ return IRQ_NONE;
+
+- spin_lock(&port->lock);
++ uart_port_lock(port);
+
+ mps2_uart_write8(port, UARTn_INT_TX, UARTn_INT);
+ mps2_uart_tx_chars(port);
+
+- spin_unlock(&port->lock);
++ uart_port_unlock(port);
+
+ return IRQ_HANDLED;
+ }
+@@ -222,7 +222,7 @@ static irqreturn_t mps2_uart_oerrirq(int
+ struct uart_port *port = data;
+ u8 irqflag = mps2_uart_read8(port, UARTn_INT);
+
+- spin_lock(&port->lock);
++ uart_port_lock(port);
+
+ if (irqflag & UARTn_INT_RX_OVERRUN) {
+ struct tty_port *tport = &port->state->port;
+@@ -244,7 +244,7 @@ static irqreturn_t mps2_uart_oerrirq(int
+ handled = IRQ_HANDLED;
+ }
+
+- spin_unlock(&port->lock);
++ uart_port_unlock(port);
+
+ return handled;
+ }
+@@ -356,12 +356,12 @@ mps2_uart_set_termios(struct uart_port *
+
+ bauddiv = DIV_ROUND_CLOSEST(port->uartclk, baud);
+
+- spin_lock_irqsave(&port->lock, flags);
++ uart_port_lock_irqsave(port, &flags);
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+ mps2_uart_write32(port, bauddiv, UARTn_BAUDDIV);
+
+- spin_unlock_irqrestore(&port->lock, flags);
++ uart_port_unlock_irqrestore(port, flags);
+
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, baud, baud);