summaryrefslogtreecommitdiffstats
path: root/debian/patches-rt/0043-serial-omap-Use-port-lock-wrappers.patch
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--debian/patches-rt/0043-serial-omap-Use-port-lock-wrappers.patch180
1 files changed, 0 insertions, 180 deletions
diff --git a/debian/patches-rt/0043-serial-omap-Use-port-lock-wrappers.patch b/debian/patches-rt/0043-serial-omap-Use-port-lock-wrappers.patch
deleted file mode 100644
index a79d6253c4..0000000000
--- a/debian/patches-rt/0043-serial-omap-Use-port-lock-wrappers.patch
+++ /dev/null
@@ -1,180 +0,0 @@
-From: Thomas Gleixner <tglx@linutronix.de>
-Date: Thu, 14 Sep 2023 20:44:00 +0206
-Subject: [PATCH 043/134] serial: omap: Use port lock wrappers
-Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz
-
-When a serial port is used for kernel console output, then all
-modifications to the UART registers which are done from other contexts,
-e.g. getty, termios, are interference points for the kernel console.
-
-So far this has been ignored and the printk output is based on the
-principle of hope. The rework of the console infrastructure which aims to
-support threaded and atomic consoles, requires to mark sections which
-modify the UART registers as unsafe. This allows the atomic write function
-to make informed decisions and eventually to restore operational state. It
-also allows to prevent the regular UART code from modifying UART registers
-while printk output is in progress.
-
-All modifications of UART registers are guarded by the UART port lock,
-which provides an obvious synchronization point with the console
-infrastructure.
-
-To avoid adding this functionality to all UART drivers, wrap the
-spin_[un]lock*() invocations for uart_port::lock into helper functions
-which just contain the spin_[un]lock*() invocations for now. In a
-subsequent step these helpers will gain the console synchronization
-mechanisms.
-
-Converted with coccinelle. No functional change.
-
-Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-Signed-off-by: John Ogness <john.ogness@linutronix.de>
-Link: https://lore.kernel.org/r/20230914183831.587273-44-john.ogness@linutronix.de
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
----
- drivers/tty/serial/omap-serial.c | 38 +++++++++++++++++++-------------------
- 1 file changed, 19 insertions(+), 19 deletions(-)
-
---- a/drivers/tty/serial/omap-serial.c
-+++ b/drivers/tty/serial/omap-serial.c
-@@ -390,10 +390,10 @@ static void serial_omap_throttle(struct
- struct uart_omap_port *up = to_uart_omap_port(port);
- unsigned long flags;
-
-- spin_lock_irqsave(&up->port.lock, flags);
-+ uart_port_lock_irqsave(&up->port, &flags);
- up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
- serial_out(up, UART_IER, up->ier);
-- spin_unlock_irqrestore(&up->port.lock, flags);
-+ uart_port_unlock_irqrestore(&up->port, flags);
- }
-
- static void serial_omap_unthrottle(struct uart_port *port)
-@@ -401,10 +401,10 @@ static void serial_omap_unthrottle(struc
- struct uart_omap_port *up = to_uart_omap_port(port);
- unsigned long flags;
-
-- spin_lock_irqsave(&up->port.lock, flags);
-+ uart_port_lock_irqsave(&up->port, &flags);
- up->ier |= UART_IER_RLSI | UART_IER_RDI;
- serial_out(up, UART_IER, up->ier);
-- spin_unlock_irqrestore(&up->port.lock, flags);
-+ uart_port_unlock_irqrestore(&up->port, flags);
- }
-
- static unsigned int check_modem_status(struct uart_omap_port *up)
-@@ -527,7 +527,7 @@ static irqreturn_t serial_omap_irq(int i
- irqreturn_t ret = IRQ_NONE;
- int max_count = 256;
-
-- spin_lock(&up->port.lock);
-+ uart_port_lock(&up->port);
-
- do {
- iir = serial_in(up, UART_IIR);
-@@ -563,7 +563,7 @@ static irqreturn_t serial_omap_irq(int i
- }
- } while (max_count--);
-
-- spin_unlock(&up->port.lock);
-+ uart_port_unlock(&up->port);
-
- tty_flip_buffer_push(&up->port.state->port);
-
-@@ -579,9 +579,9 @@ static unsigned int serial_omap_tx_empty
- unsigned int ret = 0;
-
- dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->port.line);
-- spin_lock_irqsave(&up->port.lock, flags);
-+ uart_port_lock_irqsave(&up->port, &flags);
- ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
-- spin_unlock_irqrestore(&up->port.lock, flags);
-+ uart_port_unlock_irqrestore(&up->port, flags);
-
- return ret;
- }
-@@ -647,13 +647,13 @@ static void serial_omap_break_ctl(struct
- unsigned long flags;
-
- dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->port.line);
-- spin_lock_irqsave(&up->port.lock, flags);
-+ uart_port_lock_irqsave(&up->port, &flags);
- if (break_state == -1)
- up->lcr |= UART_LCR_SBC;
- else
- up->lcr &= ~UART_LCR_SBC;
- serial_out(up, UART_LCR, up->lcr);
-- spin_unlock_irqrestore(&up->port.lock, flags);
-+ uart_port_unlock_irqrestore(&up->port, flags);
- }
-
- static int serial_omap_startup(struct uart_port *port)
-@@ -701,13 +701,13 @@ static int serial_omap_startup(struct ua
- * Now, initialize the UART
- */
- serial_out(up, UART_LCR, UART_LCR_WLEN8);
-- spin_lock_irqsave(&up->port.lock, flags);
-+ uart_port_lock_irqsave(&up->port, &flags);
- /*
- * Most PC uarts need OUT2 raised to enable interrupts.
- */
- up->port.mctrl |= TIOCM_OUT2;
- serial_omap_set_mctrl(&up->port, up->port.mctrl);
-- spin_unlock_irqrestore(&up->port.lock, flags);
-+ uart_port_unlock_irqrestore(&up->port, flags);
-
- up->msr_saved_flags = 0;
- /*
-@@ -742,10 +742,10 @@ static void serial_omap_shutdown(struct
- up->ier = 0;
- serial_out(up, UART_IER, 0);
-
-- spin_lock_irqsave(&up->port.lock, flags);
-+ uart_port_lock_irqsave(&up->port, &flags);
- up->port.mctrl &= ~TIOCM_OUT2;
- serial_omap_set_mctrl(&up->port, up->port.mctrl);
-- spin_unlock_irqrestore(&up->port.lock, flags);
-+ uart_port_unlock_irqrestore(&up->port, flags);
-
- /*
- * Disable break condition and FIFOs
-@@ -815,7 +815,7 @@ serial_omap_set_termios(struct uart_port
- * Ok, we're now changing the port state. Do it with
- * interrupts disabled.
- */
-- spin_lock_irqsave(&up->port.lock, flags);
-+ uart_port_lock_irqsave(&up->port, &flags);
-
- /*
- * Update the per-port timeout.
-@@ -1013,7 +1013,7 @@ serial_omap_set_termios(struct uart_port
-
- serial_omap_set_mctrl(&up->port, up->port.mctrl);
-
-- spin_unlock_irqrestore(&up->port.lock, flags);
-+ uart_port_unlock_irqrestore(&up->port, flags);
- dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line);
- }
-
-@@ -1216,9 +1216,9 @@ serial_omap_console_write(struct console
- if (up->port.sysrq)
- locked = 0;
- else if (oops_in_progress)
-- locked = spin_trylock(&up->port.lock);
-+ locked = uart_port_trylock(&up->port);
- else
-- spin_lock(&up->port.lock);
-+ uart_port_lock(&up->port);
-
- /*
- * First save the IER then disable the interrupts
-@@ -1245,7 +1245,7 @@ serial_omap_console_write(struct console
- check_modem_status(up);
-
- if (locked)
-- spin_unlock(&up->port.lock);
-+ uart_port_unlock(&up->port);
- local_irq_restore(flags);
- }
-
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 06:54:22 +0000