diff options
Diffstat (limited to '')
| -rw-r--r-- | debian/patches-rt/0053-serial-samsung_tty-Use-port-lock-wrappers.patch | 245 |
1 files changed, 245 insertions, 0 deletions
diff --git a/debian/patches-rt/0053-serial-samsung_tty-Use-port-lock-wrappers.patch b/debian/patches-rt/0053-serial-samsung_tty-Use-port-lock-wrappers.patch new file mode 100644 index 0000000000..74dc3c0145 --- /dev/null +++ b/debian/patches-rt/0053-serial-samsung_tty-Use-port-lock-wrappers.patch @@ -0,0 +1,245 @@ +From: Thomas Gleixner <tglx@linutronix.de> +Date: Thu, 14 Sep 2023 20:44:10 +0206 +Subject: [PATCH 053/134] serial: samsung_tty: Use port lock wrappers +Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6.7-rt18.tar.xz + +When a serial port is used for kernel console output, then all +modifications to the UART registers which are done from other contexts, +e.g. getty, termios, are interference points for the kernel console. + +So far this has been ignored and the printk output is based on the +principle of hope. The rework of the console infrastructure which aims to +support threaded and atomic consoles, requires to mark sections which +modify the UART registers as unsafe. This allows the atomic write function +to make informed decisions and eventually to restore operational state. It +also allows to prevent the regular UART code from modifying UART registers +while printk output is in progress. + +All modifications of UART registers are guarded by the UART port lock, +which provides an obvious synchronization point with the console +infrastructure. + +To avoid adding this functionality to all UART drivers, wrap the +spin_[un]lock*() invocations for uart_port::lock into helper functions +which just contain the spin_[un]lock*() invocations for now. In a +subsequent step these helpers will gain the console synchronization +mechanisms. + +Converted with coccinelle. No functional change. + +Signed-off-by: Thomas Gleixner <tglx@linutronix.de> +Signed-off-by: John Ogness <john.ogness@linutronix.de> +Link: https://lore.kernel.org/r/20230914183831.587273-54-john.ogness@linutronix.de +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> +--- + drivers/tty/serial/samsung_tty.c | 50 +++++++++++++++++++-------------------- + 1 file changed, 25 insertions(+), 25 deletions(-) + +--- a/drivers/tty/serial/samsung_tty.c ++++ b/drivers/tty/serial/samsung_tty.c +@@ -248,7 +248,7 @@ static void s3c24xx_serial_rx_enable(str + unsigned int ucon, ufcon; + int count = 10000; + +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + + while (--count && !s3c24xx_serial_txempty_nofifo(port)) + udelay(100); +@@ -262,7 +262,7 @@ static void s3c24xx_serial_rx_enable(str + wr_regl(port, S3C2410_UCON, ucon); + + ourport->rx_enabled = 1; +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + } + + static void s3c24xx_serial_rx_disable(struct uart_port *port) +@@ -271,14 +271,14 @@ static void s3c24xx_serial_rx_disable(st + unsigned long flags; + unsigned int ucon; + +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + + ucon = rd_regl(port, S3C2410_UCON); + ucon &= ~S3C2410_UCON_RXIRQMODE; + wr_regl(port, S3C2410_UCON, ucon); + + ourport->rx_enabled = 0; +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + } + + static void s3c24xx_serial_stop_tx(struct uart_port *port) +@@ -344,7 +344,7 @@ static void s3c24xx_serial_tx_dma_comple + dma->tx_transfer_addr, dma->tx_size, + DMA_TO_DEVICE); + +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + + uart_xmit_advance(port, count); + ourport->tx_in_progress = 0; +@@ -353,7 +353,7 @@ static void s3c24xx_serial_tx_dma_comple + uart_write_wakeup(port); + + s3c24xx_serial_start_next_tx(ourport); +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + } + + static void enable_tx_dma(struct s3c24xx_uart_port *ourport) +@@ -619,7 +619,7 @@ static void s3c24xx_serial_rx_dma_comple + received = dma->rx_bytes_requested - state.residue; + async_tx_ack(dma->rx_desc); + +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + + if (received) + s3c24xx_uart_copy_rx_to_tty(ourport, t, received); +@@ -631,7 +631,7 @@ static void s3c24xx_serial_rx_dma_comple + + s3c64xx_start_rx_dma(ourport); + +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + } + + static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport) +@@ -722,7 +722,7 @@ static irqreturn_t s3c24xx_serial_rx_cha + utrstat = rd_regl(port, S3C2410_UTRSTAT); + rd_regl(port, S3C2410_UFSTAT); + +- spin_lock(&port->lock); ++ uart_port_lock(port); + + if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) { + s3c64xx_start_rx_dma(ourport); +@@ -751,7 +751,7 @@ static irqreturn_t s3c24xx_serial_rx_cha + wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT); + + finish: +- spin_unlock(&port->lock); ++ uart_port_unlock(port); + + return IRQ_HANDLED; + } +@@ -849,9 +849,9 @@ static irqreturn_t s3c24xx_serial_rx_cha + struct s3c24xx_uart_port *ourport = dev_id; + struct uart_port *port = &ourport->port; + +- spin_lock(&port->lock); ++ uart_port_lock(port); + s3c24xx_serial_rx_drain_fifo(ourport); +- spin_unlock(&port->lock); ++ uart_port_unlock(port); + + return IRQ_HANDLED; + } +@@ -932,11 +932,11 @@ static irqreturn_t s3c24xx_serial_tx_irq + struct s3c24xx_uart_port *ourport = id; + struct uart_port *port = &ourport->port; + +- spin_lock(&port->lock); ++ uart_port_lock(port); + + s3c24xx_serial_tx_chars(ourport); + +- spin_unlock(&port->lock); ++ uart_port_unlock(port); + return IRQ_HANDLED; + } + +@@ -1033,7 +1033,7 @@ static void s3c24xx_serial_break_ctl(str + unsigned long flags; + unsigned int ucon; + +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + + ucon = rd_regl(port, S3C2410_UCON); + +@@ -1044,7 +1044,7 @@ static void s3c24xx_serial_break_ctl(str + + wr_regl(port, S3C2410_UCON, ucon); + +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + } + + static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) +@@ -1303,7 +1303,7 @@ static int s3c64xx_serial_startup(struct + ourport->rx_enabled = 1; + ourport->tx_enabled = 0; + +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + + ufcon = rd_regl(port, S3C2410_UFCON); + ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8; +@@ -1313,7 +1313,7 @@ static int s3c64xx_serial_startup(struct + + enable_rx_pio(ourport); + +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + + /* Enable Rx Interrupt */ + s3c24xx_clear_bit(port, S3C64XX_UINTM_RXD, S3C64XX_UINTM); +@@ -1341,7 +1341,7 @@ static int apple_s5l_serial_startup(stru + ourport->rx_enabled = 1; + ourport->tx_enabled = 0; + +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + + ufcon = rd_regl(port, S3C2410_UFCON); + ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8; +@@ -1351,7 +1351,7 @@ static int apple_s5l_serial_startup(stru + + enable_rx_pio(ourport); + +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + + /* Enable Rx Interrupt */ + s3c24xx_set_bit(port, APPLE_S5L_UCON_RXTHRESH_ENA, S3C2410_UCON); +@@ -1626,7 +1626,7 @@ static void s3c24xx_serial_set_termios(s + ulcon |= S3C2410_LCON_PNONE; + } + +- spin_lock_irqsave(&port->lock, flags); ++ uart_port_lock_irqsave(port, &flags); + + dev_dbg(port->dev, + "setting ulcon to %08x, brddiv to %d, udivslot %08x\n", +@@ -1684,7 +1684,7 @@ static void s3c24xx_serial_set_termios(s + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= RXSTAT_DUMMY_READ; + +- spin_unlock_irqrestore(&port->lock, flags); ++ uart_port_unlock_irqrestore(port, flags); + } + + static const char *s3c24xx_serial_type(struct uart_port *port) +@@ -2376,14 +2376,14 @@ s3c24xx_serial_console_write(struct cons + if (cons_uart->sysrq) + locked = false; + else if (oops_in_progress) +- locked = spin_trylock_irqsave(&cons_uart->lock, flags); ++ locked = uart_port_trylock_irqsave(cons_uart, &flags); + else +- spin_lock_irqsave(&cons_uart->lock, flags); ++ uart_port_lock_irqsave(cons_uart, &flags); + + uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar); + + if (locked) +- spin_unlock_irqrestore(&cons_uart->lock, flags); ++ uart_port_unlock_irqrestore(cons_uart, flags); + } + + /* Shouldn't be __init, as it can be instantiated from other module */ |