diff options
Diffstat (limited to 'debian/patches/bugfix/all/firmware-remove-redundant-log-messages-from-drivers.patch')
| -rw-r--r-- | debian/patches/bugfix/all/firmware-remove-redundant-log-messages-from-drivers.patch | 2311 |
1 files changed, 0 insertions, 2311 deletions
diff --git a/debian/patches/bugfix/all/firmware-remove-redundant-log-messages-from-drivers.patch b/debian/patches/bugfix/all/firmware-remove-redundant-log-messages-from-drivers.patch deleted file mode 100644 index ef0201ec34..0000000000 --- a/debian/patches/bugfix/all/firmware-remove-redundant-log-messages-from-drivers.patch +++ /dev/null @@ -1,2311 +0,0 @@ -From: Ben Hutchings <ben@decadent.org.uk> -Subject: firmware: Remove redundant log messages from drivers -Date: Sun, 09 Dec 2012 16:40:31 +0000 -Forwarded: no - -Now that firmware_class logs every success and failure consistently, -many other log messages can be removed from drivers. - -This will probably need to be split up into multiple patches prior to -upstream submission. - ---- a/arch/x86/kernel/cpu/microcode/amd.c -+++ b/arch/x86/kernel/cpu/microcode/amd.c -@@ -894,10 +894,8 @@ static enum ucode_state request_microcod - if (c->x86 >= 0x15) - snprintf(fw_name, sizeof(fw_name), "amd-ucode/microcode_amd_fam%.2xh.bin", c->x86); - -- if (request_firmware_direct(&fw, (const char *)fw_name, device)) { -- pr_debug("failed to load file %s\n", fw_name); -+ if (request_firmware_direct(&fw, (const char *)fw_name, device)) - goto out; -- } - - ret = UCODE_ERROR; - if (!verify_container(fw->data, fw->size)) ---- a/drivers/atm/fore200e.c -+++ b/drivers/atm/fore200e.c -@@ -2398,10 +2398,9 @@ static int fore200e_load_and_start_fw(st - int err; - - sprintf(buf, "%s%s", fore200e->bus->proc_name, FW_EXT); -- if ((err = request_firmware(&firmware, buf, fore200e->dev)) < 0) { -- printk(FORE200E "problem loading firmware image %s\n", fore200e->bus->model_name); -+ err = request_firmware(&firmware, buf, fore200e->dev); -+ if (err) - return err; -- } - - fw_data = (const __le32 *)firmware->data; - fw_size = firmware->size / sizeof(u32); ---- a/drivers/bluetooth/ath3k.c -+++ b/drivers/bluetooth/ath3k.c -@@ -381,10 +381,8 @@ static int ath3k_load_patch(struct usb_d - le32_to_cpu(fw_version.rom_version)); - - ret = request_firmware(&firmware, filename, &udev->dev); -- if (ret < 0) { -- BT_ERR("Patch file not found %s", filename); -+ if (ret) - return ret; -- } - - pt_rom_version = get_unaligned_le32(firmware->data + - firmware->size - 8); -@@ -444,10 +442,8 @@ static int ath3k_load_syscfg(struct usb_ - le32_to_cpu(fw_version.rom_version), clk_value, ".dfu"); - - ret = request_firmware(&firmware, filename, &udev->dev); -- if (ret < 0) { -- BT_ERR("Configuration file not found %s", filename); -+ if (ret) - return ret; -- } - - ret = ath3k_load_fwfile(udev, firmware); - release_firmware(firmware); ---- a/drivers/bluetooth/bcm203x.c -+++ b/drivers/bluetooth/bcm203x.c -@@ -173,7 +173,6 @@ static int bcm203x_probe(struct usb_inte - return -ENOMEM; - - if (request_firmware(&firmware, "BCM2033-MD.hex", &udev->dev) < 0) { -- BT_ERR("Mini driver request failed"); - usb_free_urb(data->urb); - return -EIO; - } -@@ -198,7 +197,6 @@ static int bcm203x_probe(struct usb_inte - release_firmware(firmware); - - if (request_firmware(&firmware, "BCM2033-FW.bin", &udev->dev) < 0) { -- BT_ERR("Firmware request failed"); - usb_free_urb(data->urb); - kfree(data->buffer); - return -EIO; ---- a/drivers/bluetooth/bfusb.c -+++ b/drivers/bluetooth/bfusb.c -@@ -639,10 +639,8 @@ static int bfusb_probe(struct usb_interf - skb_queue_head_init(&data->pending_q); - skb_queue_head_init(&data->completed_q); - -- if (request_firmware(&firmware, "bfubase.frm", &udev->dev) < 0) { -- BT_ERR("Firmware request failed"); -+ if (request_firmware(&firmware, "bfubase.frm", &udev->dev)) - goto done; -- } - - BT_DBG("firmware data %p size %zu", firmware->data, firmware->size); - ---- a/drivers/bluetooth/bt3c_cs.c -+++ b/drivers/bluetooth/bt3c_cs.c -@@ -569,10 +569,8 @@ static int bt3c_open(struct bt3c_info *i - - /* Load firmware */ - err = request_firmware(&firmware, "BT3CPCC.bin", &info->p_dev->dev); -- if (err < 0) { -- BT_ERR("Firmware request failed"); -+ if (err) - goto error; -- } - - err = bt3c_load_firmware(info, firmware->data, firmware->size); - ---- a/drivers/bluetooth/btmrvl_sdio.c -+++ b/drivers/bluetooth/btmrvl_sdio.c -@@ -470,8 +470,6 @@ static int btmrvl_sdio_download_helper(s - ret = request_firmware(&fw_helper, card->helper, - &card->func->dev); - if ((ret < 0) || !fw_helper) { -- BT_ERR("request_firmware(helper) failed, error code = %d", -- ret); - ret = -ENOENT; - goto done; - } -@@ -570,8 +568,6 @@ static int btmrvl_sdio_download_fw_w_hel - ret = request_firmware(&fw_firmware, card->firmware, - &card->func->dev); - if ((ret < 0) || !fw_firmware) { -- BT_ERR("request_firmware(firmware) failed, error code = %d", -- ret); - ret = -ENOENT; - goto done; - } ---- a/drivers/char/dsp56k.c -+++ b/drivers/char/dsp56k.c -@@ -142,11 +142,8 @@ static int dsp56k_upload(u_char __user * - } - err = request_firmware(&fw, fw_name, &pdev->dev); - platform_device_unregister(pdev); -- if (err) { -- printk(KERN_ERR "Failed to load image \"%s\" err %d\n", -- fw_name, err); -+ if (err) - return err; -- } - if (fw->size % 3) { - printk(KERN_ERR "Bogus length %d in image \"%s\"\n", - fw->size, fw_name); ---- a/drivers/dma/imx-sdma.c -+++ b/drivers/dma/imx-sdma.c -@@ -1933,11 +1933,8 @@ static void sdma_load_firmware(const str - const struct sdma_script_start_addrs *addr; - unsigned short *ram_code; - -- if (!fw) { -- dev_info(sdma->dev, "external firmware not found, using ROM firmware\n"); -- /* In this case we just use the ROM firmware. */ -+ if (!fw) - return; -- } - - if (fw->size < sizeof(*header)) - goto err_firmware; ---- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c -+++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c -@@ -2579,10 +2579,8 @@ gf100_gr_load_fw(struct gf100_gr *gr, co - if (ret) { - snprintf(f, sizeof(f), "nouveau/%s", name); - ret = request_firmware(&fw, f, device->dev); -- if (ret) { -- nvkm_error(subdev, "failed to load %s\n", name); -+ if (ret) - return ret; -- } - } - - blob->size = fw->size; ---- a/drivers/gpu/drm/radeon/ni.c -+++ b/drivers/gpu/drm/radeon/ni.c -@@ -820,9 +820,6 @@ int ni_init_microcode(struct radeon_devi - - out: - if (err) { -- if (err != -EINVAL) -- pr_err("ni_cp: Failed to load firmware \"%s\"\n", -- fw_name); - release_firmware(rdev->pfp_fw); - rdev->pfp_fw = NULL; - release_firmware(rdev->me_fw); ---- a/drivers/gpu/drm/radeon/r100.c -+++ b/drivers/gpu/drm/radeon/r100.c -@@ -1057,9 +1057,7 @@ static int r100_cp_init_microcode(struct - } - - err = request_firmware(&rdev->me_fw, fw_name, rdev->dev); -- if (err) { -- pr_err("radeon_cp: Failed to load firmware \"%s\"\n", fw_name); -- } else if (rdev->me_fw->size % 8) { -+ if (err == 0 && rdev->me_fw->size % 8) { - pr_err("radeon_cp: Bogus length %zu in firmware \"%s\"\n", - rdev->me_fw->size, fw_name); - err = -EINVAL; ---- a/drivers/gpu/drm/radeon/r600.c -+++ b/drivers/gpu/drm/radeon/r600.c -@@ -2600,9 +2600,6 @@ int r600_init_microcode(struct radeon_de - - out: - if (err) { -- if (err != -EINVAL) -- pr_err("r600_cp: Failed to load firmware \"%s\"\n", -- fw_name); - release_firmware(rdev->pfp_fw); - rdev->pfp_fw = NULL; - release_firmware(rdev->me_fw); ---- a/drivers/infiniband/hw/qib/qib_sd7220.c -+++ b/drivers/infiniband/hw/qib/qib_sd7220.c -@@ -406,10 +406,8 @@ int qib_sd7220_init(struct qib_devdata * - } - - ret = request_firmware(&fw, SD7220_FW_NAME, &dd->pcidev->dev); -- if (ret) { -- qib_dev_err(dd, "Failed to load IB SERDES image\n"); -+ if (ret) - goto done; -- } - - /* Substitute our deduced value for was_reset */ - ret = qib_ibsd_ucode_loaded(dd->pport, fw); ---- a/drivers/input/touchscreen/atmel_mxt_ts.c -+++ b/drivers/input/touchscreen/atmel_mxt_ts.c -@@ -2927,10 +2927,8 @@ static int mxt_load_fw(struct device *de - int ret; - - ret = request_firmware(&fw, fn, dev); -- if (ret) { -- dev_err(dev, "Unable to open firmware %s\n", fn); -+ if (ret) - return ret; -- } - - /* Check for incorrect enc file */ - ret = mxt_check_firmware_format(dev, fw); ---- a/drivers/isdn/hardware/mISDN/speedfax.c -+++ b/drivers/isdn/hardware/mISDN/speedfax.c -@@ -379,11 +379,8 @@ setup_instance(struct sfax_hw *card) - card->isar.owner = THIS_MODULE; - - err = request_firmware(&firmware, "isdn/ISAR.BIN", &card->pdev->dev); -- if (err < 0) { -- pr_info("%s: firmware request failed %d\n", -- card->name, err); -+ if (err) - goto error_fw; -- } - if (debug & DEBUG_HW) - pr_notice("%s: got firmware %zu bytes\n", - card->name, firmware->size); ---- a/drivers/media/common/siano/smscoreapi.c -+++ b/drivers/media/common/siano/smscoreapi.c -@@ -1152,10 +1152,8 @@ static int smscore_load_firmware_from_fi - return -EINVAL; - - rc = request_firmware(&fw, fw_filename, coredev->device); -- if (rc < 0) { -- pr_err("failed to open firmware file '%s'\n", fw_filename); -+ if (rc < 0) - return rc; -- } - pr_debug("read fw %s, buffer size=0x%zx\n", fw_filename, fw->size); - fw_buf = kmalloc(ALIGN(fw->size + sizeof(struct sms_firmware), - SMS_ALLOC_ALIGNMENT), GFP_KERNEL | coredev->gfp_buf_flags); ---- a/drivers/media/dvb-frontends/af9013.c -+++ b/drivers/media/dvb-frontends/af9013.c -@@ -1049,14 +1049,8 @@ static int af9013_download_firmware(stru - - /* Request the firmware, will block and timeout */ - ret = request_firmware(&firmware, name, &client->dev); -- if (ret) { -- dev_info(&client->dev, "firmware file '%s' not found %d\n", -- name, ret); -+ if (ret) - goto err; -- } -- -- dev_info(&client->dev, "downloading firmware from file '%s'\n", -- name); - - /* Write firmware checksum & size */ - for (i = 0; i < firmware->size; i++) ---- a/drivers/media/dvb-frontends/bcm3510.c -+++ b/drivers/media/dvb-frontends/bcm3510.c -@@ -636,10 +636,9 @@ static int bcm3510_download_firmware(str - int ret,i; - - deb_info("requesting firmware\n"); -- if ((ret = st->config->request_firmware(fe, &fw, BCM3510_DEFAULT_FIRMWARE)) < 0) { -- err("could not load firmware (%s): %d",BCM3510_DEFAULT_FIRMWARE,ret); -+ ret = st->config->request_firmware(fe, &fw, BCM3510_DEFAULT_FIRMWARE); -+ if (ret) - return ret; -- } - deb_info("got firmware: %zu\n", fw->size); - - b = fw->data; ---- a/drivers/media/dvb-frontends/cx24116.c -+++ b/drivers/media/dvb-frontends/cx24116.c -@@ -479,13 +479,8 @@ static int cx24116_firmware_ondemand(str - __func__, CX24116_DEFAULT_FIRMWARE); - ret = request_firmware(&fw, CX24116_DEFAULT_FIRMWARE, - state->i2c->dev.parent); -- printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", -- __func__); -- if (ret) { -- printk(KERN_ERR "%s: No firmware uploaded (timeout or file not found?)\n", -- __func__); -+ if (ret) - return ret; -- } - - /* Make sure we don't recurse back through here - * during loading */ ---- a/drivers/media/dvb-frontends/drxd_hard.c -+++ b/drivers/media/dvb-frontends/drxd_hard.c -@@ -891,10 +891,8 @@ static int load_firmware(struct drxd_sta - { - const struct firmware *fw; - -- if (request_firmware(&fw, fw_name, state->dev) < 0) { -- printk(KERN_ERR "drxd: firmware load failure [%s]\n", fw_name); -+ if (request_firmware(&fw, fw_name, state->dev)) - return -EIO; -- } - - state->microcode = kmemdup(fw->data, fw->size, GFP_KERNEL); - if (!state->microcode) { ---- a/drivers/media/dvb-frontends/drxk_hard.c -+++ b/drivers/media/dvb-frontends/drxk_hard.c -@@ -6228,10 +6228,6 @@ static void load_firmware_cb(const struc - - dprintk(1, ": %s\n", fw ? "firmware loaded" : "firmware not loaded"); - if (!fw) { -- pr_err("Could not load firmware file %s.\n", -- state->microcode_name); -- pr_info("Copy %s to your hotplug directory!\n", -- state->microcode_name); - state->microcode_name = NULL; - - /* ---- a/drivers/media/dvb-frontends/ds3000.c -+++ b/drivers/media/dvb-frontends/ds3000.c -@@ -348,12 +348,8 @@ static int ds3000_firmware_ondemand(stru - DS3000_DEFAULT_FIRMWARE); - ret = request_firmware(&fw, DS3000_DEFAULT_FIRMWARE, - state->i2c->dev.parent); -- printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", __func__); -- if (ret) { -- printk(KERN_ERR "%s: No firmware uploaded (timeout or file not found?)\n", -- __func__); -+ if (ret) - return ret; -- } - - ret = ds3000_load_firmware(fe, fw); - if (ret) ---- a/drivers/media/dvb-frontends/nxt200x.c -+++ b/drivers/media/dvb-frontends/nxt200x.c -@@ -861,12 +861,8 @@ static int nxt2002_init(struct dvb_front - __func__, NXT2002_DEFAULT_FIRMWARE); - ret = request_firmware(&fw, NXT2002_DEFAULT_FIRMWARE, - state->i2c->dev.parent); -- pr_debug("%s: Waiting for firmware upload(2)...\n", __func__); -- if (ret) { -- pr_err("%s: No firmware uploaded (timeout or file not found?)\n", -- __func__); -+ if (ret) - return ret; -- } - - ret = nxt2002_load_firmware(fe, fw); - release_firmware(fw); -@@ -928,12 +924,8 @@ static int nxt2004_init(struct dvb_front - __func__, NXT2004_DEFAULT_FIRMWARE); - ret = request_firmware(&fw, NXT2004_DEFAULT_FIRMWARE, - state->i2c->dev.parent); -- pr_debug("%s: Waiting for firmware upload(2)...\n", __func__); -- if (ret) { -- pr_err("%s: No firmware uploaded (timeout or file not found?)\n", -- __func__); -+ if (ret) - return ret; -- } - - ret = nxt2004_load_firmware(fe, fw); - release_firmware(fw); ---- a/drivers/media/dvb-frontends/or51132.c -+++ b/drivers/media/dvb-frontends/or51132.c -@@ -326,10 +326,8 @@ static int or51132_set_parameters(struct - printk("or51132: Waiting for firmware upload(%s)...\n", - fwname); - ret = request_firmware(&fw, fwname, state->i2c->dev.parent); -- if (ret) { -- printk(KERN_WARNING "or51132: No firmware uploaded(timeout or file not found?)\n"); -+ if (ret) - return ret; -- } - ret = or51132_load_firmware(fe, fw); - release_firmware(fw); - if (ret) { ---- a/drivers/media/dvb-frontends/or51211.c -+++ b/drivers/media/dvb-frontends/or51211.c -@@ -361,11 +361,8 @@ static int or51211_init(struct dvb_front - OR51211_DEFAULT_FIRMWARE); - ret = config->request_firmware(fe, &fw, - OR51211_DEFAULT_FIRMWARE); -- pr_info("Got Hotplug firmware\n"); -- if (ret) { -- pr_warn("No firmware uploaded (timeout or file not found?)\n"); -+ if (ret) - return ret; -- } - - ret = or51211_load_firmware(fe, fw); - release_firmware(fw); ---- a/drivers/media/dvb-frontends/sp887x.c -+++ b/drivers/media/dvb-frontends/sp887x.c -@@ -525,10 +525,8 @@ static int sp887x_init(struct dvb_fronte - /* request the firmware, this will block until someone uploads it */ - printk("sp887x: waiting for firmware upload (%s)...\n", SP887X_DEFAULT_FIRMWARE); - ret = state->config->request_firmware(fe, &fw, SP887X_DEFAULT_FIRMWARE); -- if (ret) { -- printk("sp887x: no firmware upload (timeout or file not found?)\n"); -+ if (ret) - return ret; -- } - - ret = sp887x_initial_setup(fe, fw); - release_firmware(fw); ---- a/drivers/media/dvb-frontends/tda10048.c -+++ b/drivers/media/dvb-frontends/tda10048.c -@@ -483,8 +483,6 @@ static int tda10048_firmware_upload(stru - ret = request_firmware(&fw, TDA10048_DEFAULT_FIRMWARE, - state->i2c->dev.parent); - if (ret) { -- printk(KERN_ERR "%s: Upload failed. (file not found?)\n", -- __func__); - return -EIO; - } else { - printk(KERN_INFO "%s: firmware read %zu bytes.\n", ---- a/drivers/media/dvb-frontends/tda1004x.c -+++ b/drivers/media/dvb-frontends/tda1004x.c -@@ -388,10 +388,8 @@ static int tda10045_fwupload(struct dvb_ - /* request the firmware, this will block until someone uploads it */ - printk(KERN_INFO "tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE); - ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE); -- if (ret) { -- printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n"); -+ if (ret) - return ret; -- } - - /* reset chip */ - tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0); -@@ -532,7 +530,6 @@ static int tda10046_fwupload(struct dvb_ - /* remain compatible to old bug: try to load with tda10045 image name */ - ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE); - if (ret) { -- printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n"); - return ret; - } else { - printk(KERN_INFO "tda1004x: please rename the firmware file to %s\n", ---- a/drivers/media/dvb-frontends/tda10071.c -+++ b/drivers/media/dvb-frontends/tda10071.c -@@ -838,12 +838,8 @@ static int tda10071_init(struct dvb_fron - - /* request the firmware, this will block and timeout */ - ret = request_firmware(&fw, fw_file, &client->dev); -- if (ret) { -- dev_err(&client->dev, -- "did not find the firmware file '%s' (status %d). You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware\n", -- fw_file, ret); -+ if (ret) - goto error; -- } - - /* init */ - for (i = 0; i < ARRAY_SIZE(tab2); i++) { ---- a/drivers/media/i2c/cx25840/cx25840-firmware.c -+++ b/drivers/media/i2c/cx25840/cx25840-firmware.c -@@ -113,10 +113,8 @@ int cx25840_loadfw(struct i2c_client *cl - if (is_cx231xx(state) && max_buf_size > 16) - max_buf_size = 16; - -- if (request_firmware(&fw, fwname, FWDEV(client)) != 0) { -- v4l_err(client, "unable to open firmware %s\n", fwname); -+ if (request_firmware(&fw, fwname, FWDEV(client)) != 0) - return -EINVAL; -- } - - start_fw_load(client); - ---- a/drivers/media/pci/bt8xx/bttv-cards.c -+++ b/drivers/media/pci/bt8xx/bttv-cards.c -@@ -3902,10 +3902,8 @@ static int pvr_boot(struct bttv *btv) - int rc; - - rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev); -- if (rc != 0) { -- pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr); -+ if (rc != 0) - return rc; -- } - rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size); - pr_info("%d: altera firmware upload %s\n", - btv->c.nr, (rc < 0) ? "failed" : "ok"); ---- a/drivers/media/pci/cx18/cx18-av-firmware.c -+++ b/drivers/media/pci/cx18/cx18-av-firmware.c -@@ -70,10 +70,8 @@ int cx18_av_loadfw(struct cx18 *cx) - int i; - int retries1 = 0; - -- if (request_firmware(&fw, FWFILE, &cx->pci_dev->dev) != 0) { -- CX18_ERR_DEV(sd, "unable to open firmware %s\n", FWFILE); -+ if (request_firmware(&fw, FWFILE, &cx->pci_dev->dev) != 0) - return -EINVAL; -- } - - /* The firmware load often has byte errors, so allow for several - retries, both at byte level and at the firmware load level. */ ---- a/drivers/media/pci/cx18/cx18-dvb.c -+++ b/drivers/media/pci/cx18/cx18-dvb.c -@@ -127,9 +127,7 @@ static int yuan_mpc718_mt352_reqfw(struc - int ret; - - ret = request_firmware(fw, fn, &cx->pci_dev->dev); -- if (ret) -- CX18_ERR("Unable to open firmware file %s\n", fn); -- else { -+ if (!ret) { - size_t sz = (*fw)->size; - if (sz < 2 || sz > 64 || (sz % 2) != 0) { - CX18_ERR("Firmware %s has a bad size: %lu bytes\n", ---- a/drivers/media/pci/cx18/cx18-firmware.c -+++ b/drivers/media/pci/cx18/cx18-firmware.c -@@ -92,11 +92,8 @@ static int load_cpu_fw_direct(const char - u32 __iomem *dst = (u32 __iomem *)mem; - const u32 *src; - -- if (request_firmware(&fw, fn, &cx->pci_dev->dev)) { -- CX18_ERR("Unable to open firmware %s\n", fn); -- CX18_ERR("Did you put the firmware in the hotplug firmware directory?\n"); -+ if (request_firmware(&fw, fn, &cx->pci_dev->dev)) - return -ENOMEM; -- } - - src = (const u32 *)fw->data; - -@@ -137,8 +134,6 @@ static int load_apu_fw_direct(const char - int sz; - - if (request_firmware(&fw, fn, &cx->pci_dev->dev)) { -- CX18_ERR("unable to open firmware %s\n", fn); -- CX18_ERR("did you put the firmware in the hotplug firmware directory?\n"); - cx18_setup_page(cx, 0); - return -ENOMEM; - } ---- a/drivers/media/pci/cx23885/cx23885-417.c -+++ b/drivers/media/pci/cx23885/cx23885-417.c -@@ -920,12 +920,8 @@ static int cx23885_load_firmware(struct - retval = request_firmware(&firmware, CX23885_FIRM_IMAGE_NAME, - &dev->pci->dev); - -- if (retval != 0) { -- pr_err("ERROR: Hotplug firmware request failed (%s).\n", -- CX23885_FIRM_IMAGE_NAME); -- pr_err("Please fix your hotplug setup, the board will not work without firmware loaded!\n"); -+ if (retval != 0) - return -1; -- } - - if (firmware->size != CX23885_FIRM_IMAGE_SIZE) { - pr_err("ERROR: Firmware size mismatch (have %zu, expected %d)\n", ---- a/drivers/media/pci/cx23885/cx23885-cards.c -+++ b/drivers/media/pci/cx23885/cx23885-cards.c -@@ -2480,10 +2480,7 @@ void cx23885_card_setup(struct cx23885_d - cinfo.rev, filename); - - ret = request_firmware(&fw, filename, &dev->pci->dev); -- if (ret != 0) -- pr_err("did not find the firmware file '%s'. You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware.", -- filename); -- else -+ if (ret == 0) - altera_init(&netup_config, fw); - - release_firmware(fw); ---- a/drivers/media/pci/cx88/cx88-blackbird.c -+++ b/drivers/media/pci/cx88/cx88-blackbird.c -@@ -462,12 +462,8 @@ static int blackbird_load_firmware(struc - retval = request_firmware(&firmware, CX2341X_FIRM_ENC_FILENAME, - &dev->pci->dev); - -- if (retval != 0) { -- pr_err("Hotplug firmware request failed (%s).\n", -- CX2341X_FIRM_ENC_FILENAME); -- pr_err("Please fix your hotplug setup, the board will not work without firmware loaded!\n"); -+ if (retval != 0) - return -EIO; -- } - - if (firmware->size != BLACKBIRD_FIRM_IMAGE_SIZE) { - pr_err("Firmware size mismatch (have %zd, expected %d)\n", ---- a/drivers/media/pci/ivtv/ivtv-firmware.c -+++ b/drivers/media/pci/ivtv/ivtv-firmware.c -@@ -68,8 +68,6 @@ retry: - release_firmware(fw); - return size; - } -- IVTV_ERR("Unable to open firmware %s (must be %ld bytes)\n", fn, size); -- IVTV_ERR("Did you put the firmware in the hotplug firmware directory?\n"); - return -ENOMEM; - } - ---- a/drivers/media/pci/ngene/ngene-core.c -+++ b/drivers/media/pci/ngene/ngene-core.c -@@ -1236,19 +1236,14 @@ static int ngene_load_firm(struct ngene - break; - } - -- if (request_firmware(&fw, fw_name, &dev->pci_dev->dev) < 0) { -- dev_err(pdev, "Could not load firmware file %s.\n", fw_name); -- dev_info(pdev, "Copy %s to your hotplug directory!\n", -- fw_name); -+ if (request_firmware(&fw, fw_name, &dev->pci_dev->dev)) - return -1; -- } - if (size == 0) - size = fw->size; - if (size != fw->size) { - dev_err(pdev, "Firmware %s has invalid size!", fw_name); - err = -1; - } else { -- dev_info(pdev, "Loading firmware file %s.\n", fw_name); - ngene_fw = (u8 *) fw->data; - err = ngene_command_load_firmware(dev, ngene_fw, size); - } ---- a/drivers/media/pci/saa7164/saa7164-fw.c -+++ b/drivers/media/pci/saa7164/saa7164-fw.c -@@ -405,11 +405,8 @@ int saa7164_downloadfirmware(struct saa7 - __func__, fwname); - - ret = request_firmware(&fw, fwname, &dev->pci->dev); -- if (ret) { -- printk(KERN_ERR "%s() Upload failed. (file not found?)\n", -- __func__); -+ if (ret) - return -ENOMEM; -- } - - printk(KERN_INFO "%s() firmware read %zu bytes.\n", - __func__, fw->size); ---- a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c -+++ b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c -@@ -65,10 +65,8 @@ int s5p_mfc_load_firmware(struct s5p_mfc - } - } - -- if (err != 0) { -- mfc_err("Firmware is not present in the /lib/firmware directory nor compiled in kernel\n"); -+ if (err != 0) - return -EINVAL; -- } - if (fw_blob->size > dev->fw_buf.size) { - mfc_err("MFC firmware is too big to be loaded\n"); - release_firmware(fw_blob); ---- a/drivers/media/radio/radio-wl1273.c -+++ b/drivers/media/radio/radio-wl1273.c -@@ -502,11 +502,8 @@ static int wl1273_fm_upload_firmware_pat - * Uploading the firmware patch is not always necessary, - * so we only print an info message. - */ -- if (request_firmware(&fw_p, fw_name, dev)) { -- dev_info(dev, "%s - %s not found\n", __func__, fw_name); -- -+ if (request_firmware(&fw_p, fw_name, dev)) - return 0; -- } - - ptr = (__u8 *) fw_p->data; - packet_num = ptr[0]; ---- a/drivers/media/radio/wl128x/fmdrv_common.c -+++ b/drivers/media/radio/wl128x/fmdrv_common.c -@@ -1240,10 +1240,8 @@ static int fm_download_firmware(struct f - - ret = request_firmware(&fw_entry, fw_name, - &fmdev->radio_dev->dev); -- if (ret < 0) { -- fmerr("Unable to read firmware(%s) content\n", fw_name); -+ if (ret) - return ret; -- } - fmdbg("Firmware(%s) length : %zu bytes\n", fw_name, fw_entry->size); - - fw_data = (void *)fw_entry->data; ---- a/drivers/media/tuners/xc2028.c -+++ b/drivers/media/tuners/xc2028.c -@@ -1366,7 +1366,6 @@ static void load_firmware_cb(const struc - - tuner_dbg("request_firmware_nowait(): %s\n", fw ? "OK" : "error"); - if (!fw) { -- tuner_err("Could not load firmware %s.\n", priv->fname); - priv->state = XC2028_NODEV; - return; - } ---- a/drivers/media/usb/cx231xx/cx231xx-417.c -+++ b/drivers/media/usb/cx231xx/cx231xx-417.c -@@ -982,11 +982,6 @@ static int cx231xx_load_firmware(struct - dev->dev); - - if (retval != 0) { -- dev_err(dev->dev, -- "ERROR: Hotplug firmware request failed (%s).\n", -- CX231xx_FIRM_IMAGE_NAME); -- dev_err(dev->dev, -- "Please fix your hotplug setup, the board will not work without firmware loaded!\n"); - vfree(p_current_fw); - vfree(p_buffer); - return retval; ---- a/drivers/media/usb/dvb-usb/dib0700_devices.c -+++ b/drivers/media/usb/dvb-usb/dib0700_devices.c -@@ -2401,12 +2401,9 @@ static int stk9090m_frontend_attach(stru - - dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80); - -- if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) { -- deb_info("%s: Upload failed. (file not found?)\n", __func__); -+ if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) - return -ENODEV; -- } else { -- deb_info("%s: firmware read %zu bytes.\n", __func__, state->frontend_firmware->size); -- } -+ deb_info("%s: firmware read %zu bytes.\n", __func__, state->frontend_firmware->size); - stk9090m_config.microcode_B_fe_size = state->frontend_firmware->size; - stk9090m_config.microcode_B_fe_buffer = state->frontend_firmware->data; - -@@ -2471,12 +2468,9 @@ static int nim9090md_frontend_attach(str - msleep(20); - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - -- if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) { -- deb_info("%s: Upload failed. (file not found?)\n", __func__); -+ if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) - return -EIO; -- } else { -- deb_info("%s: firmware read %zu bytes.\n", __func__, state->frontend_firmware->size); -- } -+ deb_info("%s: firmware read %zu bytes.\n", __func__, state->frontend_firmware->size); - nim9090md_config[0].microcode_B_fe_size = state->frontend_firmware->size; - nim9090md_config[0].microcode_B_fe_buffer = state->frontend_firmware->data; - nim9090md_config[1].microcode_B_fe_size = state->frontend_firmware->size; ---- a/drivers/media/usb/dvb-usb/dvb-usb-firmware.c -+++ b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c -@@ -90,13 +90,9 @@ int dvb_usb_download_firmware(struct usb - int ret; - const struct firmware *fw = NULL; - -- if ((ret = request_firmware(&fw, props->firmware, &udev->dev)) != 0) { -- err("did not find the firmware file '%s' (status %d). You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware", -- props->firmware,ret); -+ ret = request_firmware(&fw, props->firmware, &udev->dev); -+ if (ret) - return ret; -- } -- -- info("downloading firmware from file '%s'",props->firmware); - - switch (props->usb_ctrl) { - case CYPRESS_AN2135: ---- a/drivers/media/usb/dvb-usb/gp8psk.c -+++ b/drivers/media/usb/dvb-usb/gp8psk.c -@@ -131,19 +131,14 @@ static int gp8psk_load_bcm4500fw(struct - const u8 *ptr; - u8 *buf; - if ((ret = request_firmware(&fw, bcm4500_firmware, -- &d->udev->dev)) != 0) { -- err("did not find the bcm4500 firmware file '%s' (status %d). You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware", -- bcm4500_firmware,ret); -+ &d->udev->dev)) != 0) - return ret; -- } - - ret = -EINVAL; - - if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0)) - goto out_rel_fw; - -- info("downloading bcm4500 firmware from file '%s'",bcm4500_firmware); -- - ptr = fw->data; - buf = kmalloc(64, GFP_KERNEL); - if (!buf) { ---- a/drivers/media/usb/dvb-usb/opera1.c -+++ b/drivers/media/usb/dvb-usb/opera1.c -@@ -459,8 +459,6 @@ static int opera1_xilinx_load_firmware(s - info("start downloading fpga firmware %s",filename); - - if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) { -- err("did not find the firmware file '%s'. You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware", -- filename); - return ret; - } else { - p = kmalloc(fw->size, GFP_KERNEL); ---- a/drivers/media/usb/go7007/go7007-driver.c -+++ b/drivers/media/usb/go7007/go7007-driver.c -@@ -84,10 +84,8 @@ static int go7007_load_encoder(struct go - u16 intr_val, intr_data; - - if (go->boot_fw == NULL) { -- if (request_firmware(&fw_entry, fw_name, go->dev)) { -- v4l2_err(go, "unable to load firmware from file \"%s\"\n", fw_name); -+ if (request_firmware(&fw_entry, fw_name, go->dev)) - return -1; -- } - if (fw_entry->size < 16 || memcmp(fw_entry->data, "WISGO7007FW", 11)) { - v4l2_err(go, "file \"%s\" does not appear to be go7007 firmware\n", fw_name); - release_firmware(fw_entry); ---- a/drivers/media/usb/go7007/go7007-fw.c -+++ b/drivers/media/usb/go7007/go7007-fw.c -@@ -1565,12 +1565,8 @@ int go7007_construct_fw_image(struct go7 - default: - return -1; - } -- if (request_firmware(&fw_entry, GO7007_FW_NAME, go->dev)) { -- dev_err(go->dev, -- "unable to load firmware from file \"%s\"\n", -- GO7007_FW_NAME); -+ if (request_firmware(&fw_entry, GO7007_FW_NAME, go->dev)) - return -1; -- } - code = kcalloc(codespace, 2, GFP_KERNEL); - if (code == NULL) - goto fw_failed; ---- a/drivers/media/usb/go7007/go7007-loader.c -+++ b/drivers/media/usb/go7007/go7007-loader.c -@@ -67,11 +67,8 @@ static int go7007_loader_probe(struct us - - dev_info(&interface->dev, "loading firmware %s\n", fw1); - -- if (request_firmware(&fw, fw1, &usbdev->dev)) { -- dev_err(&interface->dev, -- "unable to load firmware from file \"%s\"\n", fw1); -+ if (request_firmware(&fw, fw1, &usbdev->dev)) - goto failed2; -- } - ret = cypress_load_firmware(usbdev, fw, CYPRESS_FX2); - release_firmware(fw); - if (0 != ret) { -@@ -82,11 +79,8 @@ static int go7007_loader_probe(struct us - if (fw2 == NULL) - return 0; - -- if (request_firmware(&fw, fw2, &usbdev->dev)) { -- dev_err(&interface->dev, -- "unable to load firmware from file \"%s\"\n", fw2); -+ if (request_firmware(&fw, fw2, &usbdev->dev)) - goto failed2; -- } - ret = cypress_load_firmware(usbdev, fw, CYPRESS_FX2); - release_firmware(fw); - if (0 != ret) { ---- a/drivers/media/usb/gspca/vicam.c -+++ b/drivers/media/usb/gspca/vicam.c -@@ -230,10 +230,8 @@ static int sd_init(struct gspca_dev *gsp - - ret = request_ihex_firmware(&fw, VICAM_FIRMWARE, - &gspca_dev->dev->dev); -- if (ret) { -- pr_err("Failed to load \"vicam/firmware.fw\": %d\n", ret); -+ if (ret) - return ret; -- } - - firmware_buf = kmalloc(PAGE_SIZE, GFP_KERNEL); - if (!firmware_buf) { ---- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c -+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c -@@ -1370,25 +1370,6 @@ static int pvr2_locate_firmware(struct p - "request_firmware fatal error with code=%d",ret); - return ret; - } -- pvr2_trace(PVR2_TRACE_ERROR_LEGS, -- "***WARNING*** Device %s firmware seems to be missing.", -- fwtypename); -- pvr2_trace(PVR2_TRACE_ERROR_LEGS, -- "Did you install the pvrusb2 firmware files in their proper location?"); -- if (fwcount == 1) { -- pvr2_trace(PVR2_TRACE_ERROR_LEGS, -- "request_firmware unable to locate %s file %s", -- fwtypename,fwnames[0]); -- } else { -- pvr2_trace(PVR2_TRACE_ERROR_LEGS, -- "request_firmware unable to locate one of the following %s files:", -- fwtypename); -- for (idx = 0; idx < fwcount; idx++) { -- pvr2_trace(PVR2_TRACE_ERROR_LEGS, -- "request_firmware: Failed to find %s", -- fwnames[idx]); -- } -- } - return ret; - } - ---- a/drivers/media/usb/s2255/s2255drv.c -+++ b/drivers/media/usb/s2255/s2255drv.c -@@ -2276,10 +2276,8 @@ static int s2255_probe(struct usb_interf - } - /* load the first chunk */ - if (request_firmware(&dev->fw_data->fw, -- FIRMWARE_FILE_NAME, &dev->udev->dev)) { -- dev_err(&interface->dev, "sensoray 2255 failed to get firmware\n"); -+ FIRMWARE_FILE_NAME, &dev->udev->dev)) - goto errorREQFW; -- } - /* check the firmware is valid */ - fw_size = dev->fw_data->fw->size; - pdata = (__le32 *) &dev->fw_data->fw->data[fw_size - 8]; ---- a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c -+++ b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c -@@ -282,10 +282,8 @@ static int ttusb_boot_dsp(struct ttusb * - - err = request_firmware(&fw, "ttusb-budget/dspbootcode.bin", - &ttusb->dev->dev); -- if (err) { -- pr_err("failed to request firmware\n"); -+ if (err) - return err; -- } - - /* BootBlock */ - b[0] = 0xaa; ---- a/drivers/media/usb/ttusb-dec/ttusb_dec.c -+++ b/drivers/media/usb/ttusb-dec/ttusb_dec.c -@@ -1317,11 +1317,8 @@ static int ttusb_dec_boot_dsp(struct ttu - dprintk("%s\n", __func__); - - result = request_firmware(&fw_entry, dec->firmware_name, &dec->udev->dev); -- if (result) { -- printk(KERN_ERR "%s: Firmware (%s) unavailable.\n", -- __func__, dec->firmware_name); -+ if (result) - return result; -- } - - firmware = fw_entry->data; - firmware_size = fw_entry->size; ---- a/drivers/misc/ti-st/st_kim.c -+++ b/drivers/misc/ti-st/st_kim.c -@@ -288,11 +288,8 @@ static long download_firmware(struct kim - request_firmware(&kim_gdata->fw_entry, bts_scr_name, - &kim_gdata->kim_pdev->dev); - if (unlikely((err != 0) || (kim_gdata->fw_entry->data == NULL) || -- (kim_gdata->fw_entry->size == 0))) { -- pr_err(" request_firmware failed(errno %ld) for %s", err, -- bts_scr_name); -+ (kim_gdata->fw_entry->size == 0))) - return -EINVAL; -- } - ptr = (void *)kim_gdata->fw_entry->data; - len = kim_gdata->fw_entry->size; - /* ---- a/drivers/net/can/softing/softing_fw.c -+++ b/drivers/net/can/softing/softing_fw.c -@@ -226,11 +226,8 @@ int softing_load_app_fw(const char *file - int8_t type_end = 0, type_entrypoint = 0; - - ret = request_firmware(&fw, file, &card->pdev->dev); -- if (ret) { -- dev_alert(&card->pdev->dev, "request_firmware(%s) got %i\n", -- file, ret); -+ if (ret) - return ret; -- } - dev_dbg(&card->pdev->dev, "firmware(%s) got %lu bytes\n", - file, (unsigned long)fw->size); - /* parse the firmware */ ---- a/drivers/net/ethernet/3com/typhoon.c -+++ b/drivers/net/ethernet/3com/typhoon.c -@@ -1279,11 +1279,8 @@ typhoon_request_firmware(struct typhoon - return 0; - - err = request_firmware(&typhoon_fw, FIRMWARE_NAME, &tp->pdev->dev); -- if (err) { -- netdev_err(tp->dev, "Failed to load firmware \"%s\"\n", -- FIRMWARE_NAME); -+ if (err) - return err; -- } - - image_data = typhoon_fw->data; - remaining = typhoon_fw->size; ---- a/drivers/net/ethernet/adaptec/starfire.c -+++ b/drivers/net/ethernet/adaptec/starfire.c -@@ -1004,11 +1004,8 @@ static int netdev_open(struct net_device - #endif /* VLAN_SUPPORT */ - - retval = request_firmware(&fw_rx, FIRMWARE_RX, &np->pci_dev->dev); -- if (retval) { -- printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n", -- FIRMWARE_RX); -+ if (retval) - goto out_init; -- } - if (fw_rx->size % 4) { - printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n", - fw_rx->size, FIRMWARE_RX); -@@ -1016,11 +1013,8 @@ static int netdev_open(struct net_device - goto out_rx; - } - retval = request_firmware(&fw_tx, FIRMWARE_TX, &np->pci_dev->dev); -- if (retval) { -- printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n", -- FIRMWARE_TX); -+ if (retval) - goto out_rx; -- } - if (fw_tx->size % 4) { - printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n", - fw_tx->size, FIRMWARE_TX); ---- a/drivers/net/ethernet/alacritech/slicoss.c -+++ b/drivers/net/ethernet/alacritech/slicoss.c -@@ -1051,11 +1051,8 @@ static int slic_load_rcvseq_firmware(str - file = (sdev->model == SLIC_MODEL_OASIS) ? SLIC_RCV_FIRMWARE_OASIS : - SLIC_RCV_FIRMWARE_MOJAVE; - err = request_firmware(&fw, file, &sdev->pdev->dev); -- if (err) { -- dev_err(&sdev->pdev->dev, -- "failed to load receive sequencer firmware %s\n", file); -+ if (err) - return err; -- } - /* Do an initial sanity check concerning firmware size now. A further - * check follows below. - */ -@@ -1126,10 +1123,8 @@ static int slic_load_firmware(struct sli - file = (sdev->model == SLIC_MODEL_OASIS) ? SLIC_FIRMWARE_OASIS : - SLIC_FIRMWARE_MOJAVE; - err = request_firmware(&fw, file, &sdev->pdev->dev); -- if (err) { -- dev_err(&sdev->pdev->dev, "failed to load firmware %s\n", file); -+ if (err) - return err; -- } - /* Do an initial sanity check concerning firmware size now. A further - * check follows below. - */ ---- a/drivers/net/ethernet/alteon/acenic.c -+++ b/drivers/net/ethernet/alteon/acenic.c -@@ -2877,11 +2877,8 @@ static int ace_load_firmware(struct net_ - fw_name = "acenic/tg1.bin"; - - ret = request_firmware(&fw, fw_name, &ap->pdev->dev); -- if (ret) { -- printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n", -- ap->name, fw_name); -+ if (ret) - return ret; -- } - - fw_data = (void *)fw->data; - ---- a/drivers/net/ethernet/broadcom/bnx2.c -+++ b/drivers/net/ethernet/broadcom/bnx2.c -@@ -3710,16 +3710,13 @@ static int bnx2_request_uncached_firmwar - } - - rc = request_firmware(&bp->mips_firmware, mips_fw_file, &bp->pdev->dev); -- if (rc) { -- pr_err("Can't load firmware file \"%s\"\n", mips_fw_file); -+ if (rc) - goto out; -- } - - rc = request_firmware(&bp->rv2p_firmware, rv2p_fw_file, &bp->pdev->dev); -- if (rc) { -- pr_err("Can't load firmware file \"%s\"\n", rv2p_fw_file); -+ if (rc) - goto err_release_mips_firmware; -- } -+ - mips_fw = (const struct bnx2_mips_fw_file *) bp->mips_firmware->data; - rv2p_fw = (const struct bnx2_rv2p_fw_file *) bp->rv2p_firmware->data; - if (bp->mips_firmware->size < sizeof(*mips_fw) || ---- a/drivers/net/ethernet/broadcom/tg3.c -+++ b/drivers/net/ethernet/broadcom/tg3.c -@@ -11474,11 +11474,8 @@ static int tg3_request_firmware(struct t - { - const struct tg3_firmware_hdr *fw_hdr; - -- if (request_firmware(&tp->fw, tp->fw_needed, &tp->pdev->dev)) { -- netdev_err(tp->dev, "Failed to load firmware \"%s\"\n", -- tp->fw_needed); -+ if (request_firmware(&tp->fw, tp->fw_needed, &tp->pdev->dev)) - return -ENOENT; -- } - - fw_hdr = (struct tg3_firmware_hdr *)tp->fw->data; - ---- a/drivers/net/ethernet/brocade/bna/cna_fwimg.c -+++ b/drivers/net/ethernet/brocade/bna/cna_fwimg.c -@@ -24,10 +24,8 @@ cna_read_firmware(struct pci_dev *pdev, - const struct firmware *fw; - u32 n; - -- if (request_firmware(&fw, fw_name, &pdev->dev)) { -- dev_alert(&pdev->dev, "can't load firmware %s\n", fw_name); -+ if (request_firmware(&fw, fw_name, &pdev->dev)) - goto error; -- } - - *bfi_image = (u32 *)fw->data; - *bfi_image_size = fw->size/sizeof(u32); ---- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c -+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c -@@ -1035,12 +1035,8 @@ int t3_get_edc_fw(struct cphy *phy, int - fw_name = get_edc_fw_name(edc_idx); - if (fw_name) - ret = request_firmware(&fw, fw_name, &adapter->pdev->dev); -- if (ret < 0) { -- dev_err(&adapter->pdev->dev, -- "could not upgrade firmware: unable to load %s\n", -- fw_name); -+ if (ret) - return ret; -- } - - /* check size, take checksum in account */ - if (fw->size > size + 4) { -@@ -1077,11 +1073,8 @@ static int upgrade_fw(struct adapter *ad - struct device *dev = &adap->pdev->dev; - - ret = request_firmware(&fw, FW_FNAME, dev); -- if (ret < 0) { -- dev_err(dev, "could not upgrade firmware: unable to load %s\n", -- FW_FNAME); -+ if (ret) - return ret; -- } - ret = t3_load_fw(adap, fw->data, fw->size); - release_firmware(fw); - -@@ -1126,11 +1119,8 @@ static int update_tpsram(struct adapter - snprintf(buf, sizeof(buf), TPSRAM_NAME, rev); - - ret = request_firmware(&tpsram, buf, dev); -- if (ret < 0) { -- dev_err(dev, "could not load TP SRAM: unable to load %s\n", -- buf); -+ if (ret) - return ret; -- } - - ret = t3_check_tpsram(adap, tpsram->data, tpsram->size); - if (ret) ---- a/drivers/net/ethernet/intel/e100.c -+++ b/drivers/net/ethernet/intel/e100.c -@@ -1262,9 +1262,6 @@ static const struct firmware *e100_reque - - if (err) { - if (required) { -- netif_err(nic, probe, nic->netdev, -- "Failed to load firmware \"%s\": %d\n", -- fw_name, err); - return ERR_PTR(err); - } else { - netif_info(nic, probe, nic->netdev, ---- a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c -+++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c -@@ -580,8 +580,6 @@ static int myri10ge_load_hotplug_firmwar - unsigned i; - - if (request_firmware(&fw, mgp->fw_name, dev) < 0) { -- dev_err(dev, "Unable to load %s firmware image via hotplug\n", -- mgp->fw_name); - status = -EINVAL; - goto abort_with_nothing; - } ---- a/drivers/net/ethernet/smsc/smc91c92_cs.c -+++ b/drivers/net/ethernet/smsc/smc91c92_cs.c -@@ -651,10 +651,8 @@ static int osi_load_firmware(struct pcmc - int i, err; - - err = request_firmware(&fw, FIRMWARE_NAME, &link->dev); -- if (err) { -- pr_err("Failed to load firmware \"%s\"\n", FIRMWARE_NAME); -+ if (err) - return err; -- } - - /* Download the Seven of Diamonds firmware */ - for (i = 0; i < fw->size; i++) { ---- a/drivers/net/ethernet/sun/cassini.c -+++ b/drivers/net/ethernet/sun/cassini.c -@@ -792,11 +792,8 @@ static void cas_saturn_firmware_init(str - return; - - err = request_firmware(&fw, fw_name, &cp->pdev->dev); -- if (err) { -- pr_err("Failed to load firmware \"%s\"\n", -- fw_name); -+ if (err) - return; -- } - if (fw->size < 2) { - pr_err("bogus length %zu in \"%s\"\n", - fw->size, fw_name); ---- a/drivers/net/hamradio/yam.c -+++ b/drivers/net/hamradio/yam.c -@@ -357,11 +357,8 @@ static unsigned char *add_mcs(unsigned c - } - err = request_firmware(&fw, fw_name[predef], &pdev->dev); - platform_device_unregister(pdev); -- if (err) { -- printk(KERN_ERR "Failed to load firmware \"%s\"\n", -- fw_name[predef]); -+ if (err) - return NULL; -- } - if (fw->size != YAM_FPGA_SIZE) { - printk(KERN_ERR "Bogus length %zu in firmware \"%s\"\n", - fw->size, fw_name[predef]); ---- a/drivers/net/usb/kaweth.c -+++ b/drivers/net/usb/kaweth.c -@@ -305,10 +305,8 @@ static int kaweth_download_firmware(stru - int ret; - - ret = request_firmware(&fw, fwname, &kaweth->dev->dev); -- if (ret) { -- dev_err(&kaweth->intf->dev, "Firmware request failed\n"); -+ if (ret) - return ret; -- } - - if (fw->size > KAWETH_FIRMWARE_BUF_SIZE) { - dev_err(&kaweth->intf->dev, "Firmware too big: %zu\n", ---- a/drivers/net/wireless/ath/ath9k/hif_usb.c -+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c -@@ -1250,9 +1250,6 @@ static void ath9k_hif_usb_firmware_cb(co - if (!ret) - return; - -- dev_err(&hif_dev->udev->dev, -- "ath9k_htc: Failed to get firmware %s\n", -- hif_dev->fw_name); - goto err_fw; - } - ---- a/drivers/net/wireless/ath/carl9170/usb.c -+++ b/drivers/net/wireless/ath/carl9170/usb.c -@@ -1029,7 +1029,6 @@ static void carl9170_usb_firmware_step2( - return; - } - -- dev_err(&ar->udev->dev, "firmware not found.\n"); - carl9170_usb_firmware_failed(ar); - } - ---- a/drivers/net/wireless/atmel/at76c50x-usb.c -+++ b/drivers/net/wireless/atmel/at76c50x-usb.c -@@ -1616,13 +1616,8 @@ static struct fwentry *at76_load_firmwar - - at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname); - ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev); -- if (ret < 0) { -- dev_err(&udev->dev, "firmware %s not found!\n", -- fwe->fwname); -- dev_err(&udev->dev, -- "you may need to download the firmware from http://developer.berlios.de/projects/at76c503a/\n"); -+ if (ret) - goto exit; -- } - - at76_dbg(DBG_FW, "got it."); - fwh = (struct at76_fw_header *)(fwe->fw->data); ---- a/drivers/net/wireless/broadcom/b43/main.c -+++ b/drivers/net/wireless/broadcom/b43/main.c -@@ -2245,19 +2245,8 @@ int b43_do_request_fw(struct b43_request - } - err = request_firmware(&ctx->blob, ctx->fwname, - ctx->dev->dev->dev); -- if (err == -ENOENT) { -- snprintf(ctx->errors[ctx->req_type], -- sizeof(ctx->errors[ctx->req_type]), -- "Firmware file \"%s\" not found\n", -- ctx->fwname); -+ if (err) - return err; -- } else if (err) { -- snprintf(ctx->errors[ctx->req_type], -- sizeof(ctx->errors[ctx->req_type]), -- "Firmware file \"%s\" request failed (err=%d)\n", -- ctx->fwname, err); -- return err; -- } - fw_ready: - if (ctx->blob->size < sizeof(struct b43_fw_header)) - goto err_format; ---- a/drivers/net/wireless/broadcom/b43legacy/main.c -+++ b/drivers/net/wireless/broadcom/b43legacy/main.c -@@ -1524,11 +1524,8 @@ static int do_request_fw(struct b43legac - } else { - err = request_firmware(fw, path, dev->dev->dev); - } -- if (err) { -- b43legacyerr(dev->wl, "Firmware file \"%s\" not found " -- "or load failed.\n", path); -+ if (err) - return err; -- } - if ((*fw)->size < sizeof(struct b43legacy_fw_header)) - goto err_format; - hdr = (struct b43legacy_fw_header *)((*fw)->data); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c -@@ -376,19 +376,13 @@ static int brcms_request_fw(struct brcms - sprintf(fw_name, "%s-%d.fw", brcms_firmwares[i], - UCODE_LOADER_API_VER); - status = request_firmware(&wl->fw.fw_bin[i], fw_name, device); -- if (status) { -- wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n", -- KBUILD_MODNAME, fw_name); -+ if (status) - return status; -- } - sprintf(fw_name, "%s_hdr-%d.fw", brcms_firmwares[i], - UCODE_LOADER_API_VER); - status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device); -- if (status) { -- wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n", -- KBUILD_MODNAME, fw_name); -+ if (status) - return status; -- } - wl->fw.hdr_num_entries[i] = - wl->fw.fw_hdr[i]->size / (sizeof(struct firmware_hdr)); - } ---- a/drivers/net/wireless/intel/ipw2x00/ipw2100.c -+++ b/drivers/net/wireless/intel/ipw2x00/ipw2100.c -@@ -8354,12 +8354,8 @@ static int ipw2100_get_firmware(struct i - - rc = request_firmware(&fw->fw_entry, fw_name, &priv->pci_dev->dev); - -- if (rc < 0) { -- printk(KERN_ERR DRV_NAME ": " -- "%s: Firmware '%s' not available or load failed.\n", -- priv->net_dev->name, fw_name); -+ if (rc) - return rc; -- } - IPW_DEBUG_INFO("firmware data %p size %zd\n", fw->fw_entry->data, - fw->fw_entry->size); - ---- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c -+++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c -@@ -3350,10 +3350,8 @@ static int ipw_get_fw(struct ipw_priv *p - - /* ask firmware_class module to get the boot firmware off disk */ - rc = request_firmware(raw, name, &priv->pci_dev->dev); -- if (rc < 0) { -- IPW_ERROR("%s request_firmware failed: Reason %d\n", name, rc); -+ if (rc) - return rc; -- } - - if ((*raw)->size < sizeof(*fw)) { - IPW_ERROR("%s is too small (%zd)\n", name, (*raw)->size); ---- a/drivers/net/wireless/intel/iwlegacy/3945-mac.c -+++ b/drivers/net/wireless/intel/iwlegacy/3945-mac.c -@@ -1829,7 +1829,6 @@ il3945_read_ucode(struct il_priv *il) - sprintf(buf, "%s%u%s", name_pre, idx, ".ucode"); - ret = request_firmware(&ucode_raw, buf, &il->pci_dev->dev); - if (ret < 0) { -- IL_ERR("%s firmware file req failed: %d\n", buf, ret); - if (ret == -ENOENT) - continue; - else ---- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c -+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c -@@ -249,8 +249,6 @@ static int iwl_request_firmware(struct i - drv->fw_index--; - - if (drv->fw_index < cfg->ucode_api_min) { -- IWL_ERR(drv, "no suitable firmware found!\n"); -- - if (cfg->ucode_api_min == cfg->ucode_api_max) { - IWL_ERR(drv, "%s-%d is required\n", fw_name_pre, - cfg->ucode_api_max); ---- a/drivers/net/wireless/intersil/p54/p54pci.c -+++ b/drivers/net/wireless/intersil/p54/p54pci.c -@@ -502,7 +502,6 @@ static void p54p_firmware_step2(const st - int err; - - if (!fw) { -- dev_err(&pdev->dev, "Cannot find firmware (isl3886pci)\n"); - err = -ENOENT; - goto out; - } ---- a/drivers/net/wireless/intersil/p54/p54spi.c -+++ b/drivers/net/wireless/intersil/p54/p54spi.c -@@ -158,10 +158,8 @@ static int p54spi_request_firmware(struc - /* FIXME: should driver use it's own struct device? */ - ret = request_firmware(&priv->firmware, "3826.arm", &priv->spi->dev); - -- if (ret < 0) { -- dev_err(&priv->spi->dev, "request_firmware() failed: %d", ret); -+ if (ret) - return ret; -- } - - ret = p54_parse_firmware(dev, priv->firmware); - if (ret) { ---- a/drivers/net/wireless/intersil/p54/p54usb.c -+++ b/drivers/net/wireless/intersil/p54/p54usb.c -@@ -929,7 +929,6 @@ static void p54u_load_firmware_cb(const - err = p54u_start_ops(priv); - } else { - err = -ENOENT; -- dev_err(&udev->dev, "Firmware not found.\n"); - } - - complete(&priv->fw_wait_load); ---- a/drivers/net/wireless/marvell/libertas_tf/if_usb.c -+++ b/drivers/net/wireless/marvell/libertas_tf/if_usb.c -@@ -820,8 +820,6 @@ static int if_usb_prog_firmware(struct l - kernel_param_lock(THIS_MODULE); - ret = request_firmware(&cardp->fw, lbtf_fw_name, &cardp->udev->dev); - if (ret < 0) { -- pr_err("request_firmware() failed with %#x\n", ret); -- pr_err("firmware %s not found\n", lbtf_fw_name); - kernel_param_unlock(THIS_MODULE); - goto done; - } ---- a/drivers/net/wireless/marvell/mwifiex/main.c -+++ b/drivers/net/wireless/marvell/mwifiex/main.c -@@ -549,11 +549,8 @@ static int _mwifiex_fw_dpc(const struct - struct wireless_dev *wdev; - struct completion *fw_done = adapter->fw_done; - -- if (!firmware) { -- mwifiex_dbg(adapter, ERROR, -- "Failed to get firmware %s\n", adapter->fw_name); -+ if (!firmware) - goto err_dnld_fw; -- } - - memset(&fw, 0, sizeof(struct mwifiex_fw_image)); - adapter->firmware = firmware; ---- a/drivers/net/wireless/marvell/mwl8k.c -+++ b/drivers/net/wireless/marvell/mwl8k.c -@@ -5736,16 +5736,12 @@ static int mwl8k_firmware_load_success(s - static void mwl8k_fw_state_machine(const struct firmware *fw, void *context) - { - struct mwl8k_priv *priv = context; -- struct mwl8k_device_info *di = priv->device_info; - int rc; - - switch (priv->fw_state) { - case FW_STATE_INIT: -- if (!fw) { -- printk(KERN_ERR "%s: Error requesting helper fw %s\n", -- pci_name(priv->pdev), di->helper_image); -+ if (!fw) - goto fail; -- } - priv->fw_helper = fw; - rc = mwl8k_request_fw(priv, priv->fw_pref, &priv->fw_ucode, - true); -@@ -5780,11 +5776,8 @@ static void mwl8k_fw_state_machine(const - break; - - case FW_STATE_LOADING_ALT: -- if (!fw) { -- printk(KERN_ERR "%s: Error requesting alt fw %s\n", -- pci_name(priv->pdev), di->helper_image); -+ if (!fw) - goto fail; -- } - priv->fw_ucode = fw; - rc = mwl8k_firmware_load_success(priv); - if (rc) -@@ -5822,10 +5815,8 @@ retry: - - /* Ask userland hotplug daemon for the device firmware */ - rc = mwl8k_request_firmware(priv, fw_image, nowait); -- if (rc) { -- wiphy_err(hw->wiphy, "Firmware files not found\n"); -+ if (rc) - return rc; -- } - - if (nowait) - return rc; ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00firmware.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00firmware.c -@@ -38,10 +38,8 @@ static int rt2x00lib_request_firmware(st - rt2x00_info(rt2x00dev, "Loading firmware file '%s'\n", fw_name); - - retval = request_firmware(&fw, fw_name, device); -- if (retval) { -- rt2x00_err(rt2x00dev, "Failed to request Firmware\n"); -+ if (retval) - return retval; -- } - - if (!fw || !fw->size || !fw->data) { - rt2x00_err(rt2x00dev, "Failed to read Firmware\n"); ---- a/drivers/net/wireless/realtek/rtlwifi/core.c -+++ b/drivers/net/wireless/realtek/rtlwifi/core.c -@@ -88,7 +88,6 @@ static void rtl_fw_do_work(const struct - if (!err) - goto found_alt; - } -- pr_err("Selected firmware is not available\n"); - rtlpriv->max_fw_size = 0; - goto exit; - } ---- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c -+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c -@@ -63,13 +63,11 @@ static void rtl92se_fw_cb(const struct f - struct ieee80211_hw *hw = context; - struct rtl_priv *rtlpriv = rtl_priv(hw); - struct rt_firmware *pfirmware = NULL; -- char *fw_name = "rtlwifi/rtl8192sefw.bin"; - - rtl_dbg(rtlpriv, COMP_ERR, DBG_LOUD, - "Firmware callback routine entered!\n"); - complete(&rtlpriv->firmware_loading_complete); - if (!firmware) { -- pr_err("Firmware %s not available\n", fw_name); - rtlpriv->max_fw_size = 0; - return; - } ---- a/drivers/net/wireless/ti/wl1251/main.c -+++ b/drivers/net/wireless/ti/wl1251/main.c -@@ -57,10 +57,8 @@ static int wl1251_fetch_firmware(struct - - ret = request_firmware(&fw, WL1251_FW_NAME, dev); - -- if (ret < 0) { -- wl1251_error("could not get firmware: %d", ret); -+ if (ret) - return ret; -- } - - if (fw->size % 4) { - wl1251_error("firmware size is not multiple of 32 bits: %zu", -@@ -96,10 +94,8 @@ static int wl1251_fetch_nvs(struct wl125 - - ret = request_firmware(&fw, WL1251_NVS_NAME, dev); - -- if (ret < 0) { -- wl1251_error("could not get nvs file: %d", ret); -+ if (ret) - return ret; -- } - - if (fw->size % 4) { - wl1251_error("nvs size is not multiple of 32 bits: %zu", ---- a/drivers/net/wireless/ti/wlcore/main.c -+++ b/drivers/net/wireless/ti/wlcore/main.c -@@ -756,10 +756,8 @@ static int wl12xx_fetch_firmware(struct - - ret = request_firmware(&fw, fw_name, wl->dev); - -- if (ret < 0) { -- wl1271_error("could not get firmware %s: %d", fw_name, ret); -+ if (ret) - return ret; -- } - - if (fw->size % 4) { - wl1271_error("firmware size is not multiple of 32 bits: %zu", ---- a/drivers/net/wireless/zydas/zd1211rw/zd_usb.c -+++ b/drivers/net/wireless/zydas/zd1211rw/zd_usb.c -@@ -107,16 +107,9 @@ static void int_urb_complete(struct urb - static int request_fw_file( - const struct firmware **fw, const char *name, struct device *device) - { -- int r; -- - dev_dbg_f(device, "fw name %s\n", name); - -- r = request_firmware(fw, name, device); -- if (r) -- dev_err(device, -- "Could not load firmware file %s. Error number %d\n", -- name, r); -- return r; -+ return request_firmware(fw, name, device); - } - - static inline u16 get_bcdDevice(const struct usb_device *udev) ---- a/drivers/scsi/advansys.c -+++ b/drivers/scsi/advansys.c -@@ -4054,8 +4054,6 @@ static int AscInitAsc1000Driver(ASC_DVC_ - - err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); - if (err) { -- printk(KERN_ERR "Failed to load image \"%s\" err %d\n", -- fwname, err); - asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM; - return err; - } -@@ -4420,8 +4418,6 @@ static int AdvInitAsc3550Driver(ADV_DVC_ - - err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); - if (err) { -- printk(KERN_ERR "Failed to load image \"%s\" err %d\n", -- fwname, err); - asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; - return err; - } -@@ -4920,8 +4916,6 @@ static int AdvInitAsc38C0800Driver(ADV_D - - err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); - if (err) { -- printk(KERN_ERR "Failed to load image \"%s\" err %d\n", -- fwname, err); - asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; - return err; - } -@@ -5408,8 +5402,6 @@ static int AdvInitAsc38C1600Driver(ADV_D - - err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); - if (err) { -- printk(KERN_ERR "Failed to load image \"%s\" err %d\n", -- fwname, err); - asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; - return err; - } ---- a/drivers/scsi/aic94xx/aic94xx_init.c -+++ b/drivers/scsi/aic94xx/aic94xx_init.c -@@ -370,8 +370,6 @@ static ssize_t asd_store_update_bios(str - filename_ptr, - &asd_ha->pcidev->dev); - if (err) { -- asd_printk("Failed to load bios image file %s, error %d\n", -- filename_ptr, err); - err = FAIL_OPEN_BIOS_FILE; - goto out1; - } ---- a/drivers/scsi/aic94xx/aic94xx_seq.c -+++ b/drivers/scsi/aic94xx/aic94xx_seq.c -@@ -1302,11 +1302,8 @@ int asd_init_seqs(struct asd_ha_struct * - - err = asd_request_firmware(asd_ha); - -- if (err) { -- asd_printk("Failed to load sequencer firmware file %s, error %d\n", -- SAS_RAZOR_SEQUENCER_FW_FILE, err); -+ if (err) - return err; -- } - - err = asd_seq_download_seqs(asd_ha); - if (err) { ---- a/drivers/scsi/bfa/bfad.c -+++ b/drivers/scsi/bfa/bfad.c -@@ -1737,7 +1737,6 @@ bfad_read_firmware(struct pci_dev *pdev, - const struct firmware *fw; - - if (request_firmware(&fw, fw_name, &pdev->dev)) { -- printk(KERN_ALERT "Can't locate firmware %s\n", fw_name); - *bfi_image = NULL; - goto out; - } ---- a/drivers/scsi/ipr.c -+++ b/drivers/scsi/ipr.c -@@ -4013,10 +4013,8 @@ static ssize_t ipr_store_update_fw(struc - if (endline) - *endline = '\0'; - -- if (request_firmware(&fw_entry, fname, &ioa_cfg->pdev->dev)) { -- dev_err(&ioa_cfg->pdev->dev, "Firmware file %s not found\n", fname); -+ if (request_firmware(&fw_entry, fname, &ioa_cfg->pdev->dev)) - return -EIO; -- } - - image_hdr = (struct ipr_ucode_image_header *)fw_entry->data; - ---- a/drivers/scsi/pm8001/pm8001_ctl.c -+++ b/drivers/scsi/pm8001/pm8001_ctl.c -@@ -842,9 +842,6 @@ static ssize_t pm8001_store_update_fw(st - pm8001_ha->dev); - - if (ret) { -- pm8001_dbg(pm8001_ha, FAIL, -- "Failed to load firmware image file %s, error %d\n", -- filename_ptr, ret); - pm8001_ha->fw_status = FAIL_OPEN_BIOS_FILE; - goto out; - } ---- a/drivers/scsi/qla1280.c -+++ b/drivers/scsi/qla1280.c -@@ -1506,8 +1506,6 @@ qla1280_request_firmware(struct scsi_qla - err = request_firmware(&fw, fwname, &ha->pdev->dev); - - if (err) { -- printk(KERN_ERR "Failed to load image \"%s\" err %d\n", -- fwname, err); - fw = ERR_PTR(err); - goto unlock; - } ---- a/drivers/scsi/qla2xxx/qla_init.c -+++ b/drivers/scsi/qla2xxx/qla_init.c -@@ -8560,10 +8560,6 @@ qla2x00_load_risc(scsi_qla_host_t *vha, - /* Load firmware blob. */ - blob = qla2x00_request_firmware(vha); - if (!blob) { -- ql_log(ql_log_info, vha, 0x0083, -- "Firmware image unavailable.\n"); -- ql_log(ql_log_info, vha, 0x0084, -- "Firmware images can be retrieved from: "QLA_FW_URL ".\n"); - return QLA_FUNCTION_FAILED; - } - -@@ -8666,9 +8662,6 @@ qla24xx_load_risc_blob(scsi_qla_host_t * - - blob = qla2x00_request_firmware(vha); - if (!blob) { -- ql_log(ql_log_warn, vha, 0x0092, -- "-> Firmware file not found.\n"); -- - return QLA_FUNCTION_FAILED; - } - ---- a/drivers/scsi/qla2xxx/qla_nx.c -+++ b/drivers/scsi/qla2xxx/qla_nx.c -@@ -2427,11 +2427,8 @@ try_blob_fw: - - /* Load firmware blob. */ - blob = ha->hablob = qla2x00_request_firmware(vha); -- if (!blob) { -- ql_log(ql_log_fatal, vha, 0x00a3, -- "Firmware image not present.\n"); -+ if (!blob) - goto fw_load_failed; -- } - - /* Validating firmware blob */ - if (qla82xx_validate_firmware_blob(vha, ---- a/drivers/scsi/qla2xxx/qla_os.c -+++ b/drivers/scsi/qla2xxx/qla_os.c -@@ -7697,8 +7697,6 @@ qla2x00_request_firmware(scsi_qla_host_t - goto out; - - if (request_firmware(&blob->fw, blob->name, &ha->pdev->dev)) { -- ql_log(ql_log_warn, vha, 0x0063, -- "Failed to load firmware image (%s).\n", blob->name); - blob->fw = NULL; - blob = NULL; - } ---- a/drivers/scsi/qlogicpti.c -+++ b/drivers/scsi/qlogicpti.c -@@ -486,11 +486,8 @@ static int qlogicpti_load_firmware(struc - int i, timeout; - - err = request_firmware(&fw, fwname, &qpti->op->dev); -- if (err) { -- printk(KERN_ERR "Failed to load image \"%s\" err %d\n", -- fwname, err); -+ if (err) - return err; -- } - if (fw->size % 2) { - printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", - fw->size, fwname); ---- a/drivers/staging/rtl8712/hal_init.c -+++ b/drivers/staging/rtl8712/hal_init.c -@@ -72,8 +72,6 @@ int rtl871x_load_fw(struct _adapter *pad - dev_info(dev, "r8712u: Loading firmware from \"%s\"\n", firmware_file); - rc = request_firmware_nowait(THIS_MODULE, 1, firmware_file, dev, - GFP_KERNEL, padapter, rtl871x_load_fw_cb); -- if (rc) -- dev_err(dev, "r8712u: Firmware request error %d\n", rc); - return rc; - } - MODULE_FIRMWARE("rtlwifi/rtl8712u.bin"); ---- a/drivers/staging/vt6656/main_usb.c -+++ b/drivers/staging/vt6656/main_usb.c -@@ -107,11 +107,8 @@ static int vnt_download_firmware(struct - dev_dbg(dev, "---->Download firmware\n"); - - ret = request_firmware(&fw, FIRMWARE_NAME, dev); -- if (ret) { -- dev_err(dev, "firmware file %s request failed (%d)\n", -- FIRMWARE_NAME, ret); -+ if (ret) - goto end; -- } - - for (ii = 0; ii < fw->size; ii += FIRMWARE_CHUNK_SIZE) { - length = min_t(int, fw->size - ii, FIRMWARE_CHUNK_SIZE); ---- a/drivers/tty/moxa.c -+++ b/drivers/tty/moxa.c -@@ -1154,13 +1154,8 @@ static int moxa_init_board(struct moxa_b - } - - ret = request_firmware(&fw, file, dev); -- if (ret) { -- printk(KERN_ERR "MOXA: request_firmware failed. Make sure " -- "you've placed '%s' file into your firmware " -- "loader directory (e.g. /lib/firmware)\n", -- file); -+ if (ret) - goto err_free; -- } - - ret = moxa_load_fw(brd, fw); - ---- a/drivers/tty/serial/icom.c -+++ b/drivers/tty/serial/icom.c -@@ -621,7 +621,6 @@ static void load_code(struct icom_port * - - /* Load Call Setup into Adapter */ - if (request_firmware(&fw, "icom_call_setup.bin", &dev->dev) < 0) { -- dev_err(&dev->dev,"Unable to load icom_call_setup.bin firmware image\n"); - status = -1; - goto load_code_exit; - } -@@ -641,7 +640,6 @@ static void load_code(struct icom_port * - - /* Load Resident DCE portion of Adapter */ - if (request_firmware(&fw, "icom_res_dce.bin", &dev->dev) < 0) { -- dev_err(&dev->dev,"Unable to load icom_res_dce.bin firmware image\n"); - status = -1; - goto load_code_exit; - } -@@ -686,7 +684,6 @@ static void load_code(struct icom_port * - } - - if (request_firmware(&fw, "icom_asc.bin", &dev->dev) < 0) { -- dev_err(&dev->dev,"Unable to load icom_asc.bin firmware image\n"); - status = -1; - goto load_code_exit; - } ---- a/drivers/tty/serial/ucc_uart.c -+++ b/drivers/tty/serial/ucc_uart.c -@@ -1149,10 +1149,8 @@ static void uart_firmware_cont(const str - struct device *dev = context; - int ret; - -- if (!fw) { -- dev_err(dev, "firmware not found\n"); -+ if (!fw) - return; -- } - - firmware = (struct qe_firmware *) fw->data; - ---- a/drivers/usb/atm/cxacru.c -+++ b/drivers/usb/atm/cxacru.c -@@ -1084,8 +1084,6 @@ static int cxacru_find_firmware(struct c - return -ENOENT; - } - -- usb_info(usbatm, "found firmware %s\n", buf); -- - return 0; - } - ---- a/drivers/usb/atm/ueagle-atm.c -+++ b/drivers/usb/atm/ueagle-atm.c -@@ -606,10 +606,8 @@ static void uea_upload_pre_firmware(cons - int ret, size; - - uea_enters(usb); -- if (!fw_entry) { -- uea_err(usb, "firmware is not available\n"); -+ if (!fw_entry) - goto err; -- } - - pfw = fw_entry->data; - size = fw_entry->size; -@@ -704,10 +702,6 @@ static int uea_load_firmware(struct usb_ - ret = request_firmware_nowait(THIS_MODULE, 1, fw_name, &usb->dev, - GFP_KERNEL, usb, - uea_upload_pre_firmware); -- if (ret) -- uea_err(usb, "firmware %s is not available\n", fw_name); -- else -- uea_info(usb, "loading firmware %s\n", fw_name); - - uea_leaves(usb); - return ret; -@@ -869,12 +863,8 @@ static int request_dsp(struct uea_softc - } - - ret = request_firmware(&sc->dsp_firm, dsp_name, &sc->usb_dev->dev); -- if (ret < 0) { -- uea_err(INS_TO_USBDEV(sc), -- "requesting firmware %s failed with error %d\n", -- dsp_name, ret); -+ if (ret) - return ret; -- } - - if (UEA_CHIP_VERSION(sc) == EAGLE_IV) - ret = check_dsp_e4(sc->dsp_firm->data, sc->dsp_firm->size); -@@ -1587,12 +1577,8 @@ static int request_cmvs_old(struct uea_s - - cmvs_file_name(sc, cmv_name, 1); - ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev); -- if (ret < 0) { -- uea_err(INS_TO_USBDEV(sc), -- "requesting firmware %s failed with error %d\n", -- cmv_name, ret); -+ if (ret) - return ret; -- } - - data = (u8 *) (*fw)->data; - size = (*fw)->size; -@@ -1629,9 +1615,6 @@ static int request_cmvs(struct uea_softc - "try to get older cmvs\n", cmv_name); - return request_cmvs_old(sc, cmvs, fw); - } -- uea_err(INS_TO_USBDEV(sc), -- "requesting firmware %s failed with error %d\n", -- cmv_name, ret); - return ret; - } - -@@ -1914,11 +1897,8 @@ static int load_XILINX_firmware(struct u - uea_enters(INS_TO_USBDEV(sc)); - - ret = request_firmware(&fw_entry, fw_name, &sc->usb_dev->dev); -- if (ret) { -- uea_err(INS_TO_USBDEV(sc), "firmware %s is not available\n", -- fw_name); -+ if (ret) - goto err0; -- } - - pfw = fw_entry->data; - size = fw_entry->size; ---- a/drivers/usb/misc/emi26.c -+++ b/drivers/usb/misc/emi26.c -@@ -85,21 +85,17 @@ static int emi26_load_firmware (struct u - - err = request_ihex_firmware(&loader_fw, "emi26/loader.fw", &dev->dev); - if (err) -- goto nofw; -+ goto wraperr; - - err = request_ihex_firmware(&bitstream_fw, "emi26/bitstream.fw", - &dev->dev); - if (err) -- goto nofw; -+ goto wraperr; - - err = request_ihex_firmware(&firmware_fw, "emi26/firmware.fw", - &dev->dev); -- if (err) { -- nofw: -- dev_err(&dev->dev, "%s - request_firmware() failed\n", -- __func__); -+ if (err) - goto wraperr; -- } - - /* Assert reset (stop the CPU in the EMI) */ - err = emi26_set_reset(dev,1); ---- a/drivers/usb/misc/ezusb.c -+++ b/drivers/usb/misc/ezusb.c -@@ -64,12 +64,8 @@ static int ezusb_ihex_firmware_download( - const struct ihex_binrec *record; - - if (request_ihex_firmware(&firmware, firmware_path, -- &dev->dev)) { -- dev_err(&dev->dev, -- "%s - request \"%s\" failed\n", -- __func__, firmware_path); -+ &dev->dev)) - goto out; -- } - - ret = ezusb_set_reset(dev, fx.cpucs_reg, 0); - if (ret < 0) ---- a/drivers/usb/misc/isight_firmware.c -+++ b/drivers/usb/misc/isight_firmware.c -@@ -45,7 +45,6 @@ static int isight_firmware_load(struct u - return -ENOMEM; - - if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) { -- printk(KERN_ERR "Unable to load isight firmware\n"); - ret = -ENODEV; - goto out; - } ---- a/drivers/usb/serial/io_edgeport.c -+++ b/drivers/usb/serial/io_edgeport.c -@@ -332,11 +332,8 @@ static void update_edgeport_E2PROM(struc - - response = request_ihex_firmware(&fw, fw_name, - &edge_serial->serial->dev->dev); -- if (response) { -- dev_err(dev, "Failed to load image \"%s\" err %d\n", -- fw_name, response); -+ if (response) - return; -- } - - rec = (const struct ihex_binrec *)fw->data; - BootMajorVersion = rec->data[0]; ---- a/drivers/usb/serial/io_ti.c -+++ b/drivers/usb/serial/io_ti.c -@@ -1009,8 +1009,6 @@ static int download_fw(struct edgeport_s - - status = request_firmware(&fw, fw_name, dev); - if (status) { -- dev_err(dev, "Failed to load image \"%s\" err %d\n", -- fw_name, status); - return status; - } - ---- a/drivers/usb/serial/ti_usb_3410_5052.c -+++ b/drivers/usb/serial/ti_usb_3410_5052.c -@@ -1635,10 +1635,8 @@ static int ti_download_firmware(struct t - } - - check_firmware: -- if (status) { -- dev_err(&dev->dev, "%s - firmware not found\n", __func__); -+ if (status) - return -ENOENT; -- } - if (fw_p->size > TI_FIRMWARE_BUF_SIZE) { - dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size); - release_firmware(fw_p); ---- a/drivers/video/fbdev/broadsheetfb.c -+++ b/drivers/video/fbdev/broadsheetfb.c -@@ -743,10 +743,8 @@ static ssize_t broadsheet_loadstore_wave - return -EINVAL; - - err = request_firmware(&fw_entry, "broadsheet.wbf", dev); -- if (err < 0) { -- dev_err(dev, "Failed to get broadsheet waveform\n"); -+ if (err) - goto err_failed; -- } - - /* try to enforce reasonable min max on waveform */ - if ((fw_entry->size < 8*1024) || (fw_entry->size > 64*1024)) { ---- a/drivers/video/fbdev/metronomefb.c -+++ b/drivers/video/fbdev/metronomefb.c -@@ -621,10 +621,8 @@ static int metronomefb_probe(struct plat - a) request the waveform file from userspace - b) process waveform and decode into metromem */ - retval = request_firmware(&fw_entry, "metronome.wbf", &dev->dev); -- if (retval < 0) { -- dev_err(&dev->dev, "Failed to get waveform\n"); -+ if (retval) - goto err_csum_table; -- } - - retval = load_waveform((u8 *) fw_entry->data, fw_entry->size, 3, 31, - par); ---- a/sound/drivers/vx/vx_hwdep.c -+++ b/sound/drivers/vx/vx_hwdep.c -@@ -58,10 +58,8 @@ int snd_vx_setup_firmware(struct vx_core - if (! fw_files[chip->type][i]) - continue; - sprintf(path, "vx/%s", fw_files[chip->type][i]); -- if (request_firmware(&fw, path, chip->dev)) { -- snd_printk(KERN_ERR "vx: can't load firmware %s\n", path); -+ if (request_firmware(&fw, path, chip->dev)) - return -ENOENT; -- } - err = chip->ops->load_dsp(chip, i, fw); - if (err < 0) { - release_firmware(fw); ---- a/sound/isa/msnd/msnd_pinnacle.c -+++ b/sound/isa/msnd/msnd_pinnacle.c -@@ -376,15 +376,11 @@ static int upload_dsp_code(struct snd_ca - outb(HPBLKSEL_0, chip->io + HP_BLKS); - - err = request_firmware(&init_fw, INITCODEFILE, card->dev); -- if (err < 0) { -- printk(KERN_ERR LOGNAME ": Error loading " INITCODEFILE); -+ if (err) - goto cleanup1; -- } - err = request_firmware(&perm_fw, PERMCODEFILE, card->dev); -- if (err < 0) { -- printk(KERN_ERR LOGNAME ": Error loading " PERMCODEFILE); -+ if (err) - goto cleanup; -- } - - memcpy_toio(chip->mappedbase, perm_fw->data, perm_fw->size); - if (snd_msnd_upload_host(chip, init_fw->data, init_fw->size) < 0) { ---- a/sound/isa/sscape.c -+++ b/sound/isa/sscape.c -@@ -520,10 +520,8 @@ static int sscape_upload_bootblock(struc - int ret; - - ret = request_firmware(&init_fw, "scope.cod", card->dev); -- if (ret < 0) { -- snd_printk(KERN_ERR "sscape: Error loading scope.cod"); -+ if (ret) - return ret; -- } - ret = upload_dma_data(sscape, init_fw->data, init_fw->size); - - release_firmware(init_fw); -@@ -560,11 +558,8 @@ static int sscape_upload_microcode(struc - scnprintf(name, sizeof(name), "sndscape.co%d", version); - - err = request_firmware(&init_fw, name, card->dev); -- if (err < 0) { -- snd_printk(KERN_ERR "sscape: Error loading sndscape.co%d", -- version); -+ if (err) - return err; -- } - err = upload_dma_data(sscape, init_fw->data, init_fw->size); - if (err == 0) - snd_printk(KERN_INFO "sscape: MIDI firmware loaded %zu KBs\n", ---- a/sound/isa/wavefront/wavefront_synth.c -+++ b/sound/isa/wavefront/wavefront_synth.c -@@ -1970,10 +1970,8 @@ wavefront_download_firmware (snd_wavefro - const struct firmware *firmware; - - err = request_firmware(&firmware, path, dev->card->dev); -- if (err < 0) { -- snd_printk(KERN_ERR "firmware (%s) download failed!!!\n", path); -+ if (err) - return 1; -- } - - len = 0; - buf = firmware->data; ---- a/sound/pci/asihpi/hpidspcd.c -+++ b/sound/pci/asihpi/hpidspcd.c -@@ -35,8 +35,6 @@ short hpi_dsp_code_open(u32 adapter, voi - err = request_firmware(&firmware, fw_name, &dev->dev); - - if (err || !firmware) { -- dev_err(&dev->dev, "%d, request_firmware failed for %s\n", -- err, fw_name); - goto error1; - } - if (firmware->size < sizeof(header)) { ---- a/sound/pci/cs46xx/cs46xx_lib.c -+++ b/sound/pci/cs46xx/cs46xx_lib.c -@@ -3196,11 +3196,8 @@ int snd_cs46xx_start_dsp(struct snd_cs46 - #ifdef CONFIG_SND_CS46XX_NEW_DSP - for (i = 0; i < CS46XX_DSP_MODULES; i++) { - err = load_firmware(chip, &chip->modules[i], module_names[i]); -- if (err < 0) { -- dev_err(chip->card->dev, "firmware load error [%s]\n", -- module_names[i]); -+ if (err < 0) - return err; -- } - err = cs46xx_dsp_load_module(chip, chip->modules[i]); - if (err < 0) { - dev_err(chip->card->dev, "image download error [%s]\n", ---- a/sound/pci/echoaudio/echoaudio.c -+++ b/sound/pci/echoaudio/echoaudio.c -@@ -48,11 +48,8 @@ static int get_firmware(const struct fir - "firmware requested: %s\n", card_fw[fw_index].data); - snprintf(name, sizeof(name), "ea/%s", card_fw[fw_index].data); - err = request_firmware(fw_entry, name, &chip->pci->dev); -- if (err < 0) -- dev_err(chip->card->dev, -- "get_firmware(): Firmware not available (%d)\n", err); - #ifdef CONFIG_PM_SLEEP -- else -+ if (!err) - chip->fw_cache[fw_index] = *fw_entry; - #endif - return err; ---- a/sound/pci/emu10k1/emu10k1_main.c -+++ b/sound/pci/emu10k1/emu10k1_main.c -@@ -864,10 +864,8 @@ static int snd_emu10k1_emu1010_init(stru - dev_info(emu->card->dev, "emu1010: EMU_HANA_ID = 0x%x\n", reg); - - err = snd_emu1010_load_firmware(emu, 0, &emu->firmware); -- if (err < 0) { -- dev_info(emu->card->dev, "emu1010: Loading Firmware failed\n"); -+ if (err < 0) - return err; -- } - - /* ID, should read & 0x7f = 0x55 when FPGA programmed. */ - snd_emu1010_fpga_read(emu, EMU_HANA_ID, ®); ---- a/sound/pci/hda/hda_intel.c -+++ b/sound/pci/hda/hda_intel.c -@@ -2034,8 +2034,6 @@ static void azx_firmware_cb(const struct - - if (fw) - chip->fw = fw; -- else -- dev_err(card->dev, "Cannot load firmware, continue without patching\n"); - if (!chip->disabled) { - /* continue probing */ - azx_probe_continue(chip); ---- a/sound/pci/korg1212/korg1212.c -+++ b/sound/pci/korg1212/korg1212.c -@@ -2232,7 +2232,6 @@ static int snd_korg1212_create(struct sn - - err = request_firmware(&dsp_code, "korg/k1212.dsp", &pci->dev); - if (err < 0) { -- snd_printk(KERN_ERR "firmware not available\n"); - return err; - } - ---- a/sound/pci/mixart/mixart_hwdep.c -+++ b/sound/pci/mixart/mixart_hwdep.c -@@ -566,11 +566,8 @@ int snd_mixart_setup_firmware(struct mix - - for (i = 0; i < 3; i++) { - sprintf(path, "mixart/%s", fw_files[i]); -- if (request_firmware(&fw_entry, path, &mgr->pci->dev)) { -- dev_err(&mgr->pci->dev, -- "miXart: can't load firmware %s\n", path); -+ if (request_firmware(&fw_entry, path, &mgr->pci->dev)) - return -ENOENT; -- } - /* fake hwdep dsp record */ - err = mixart_dsp_load(mgr, i, fw_entry); - release_firmware(fw_entry); ---- a/sound/pci/pcxhr/pcxhr_hwdep.c -+++ b/sound/pci/pcxhr/pcxhr_hwdep.c -@@ -375,12 +375,8 @@ int pcxhr_setup_firmware(struct pcxhr_mg - if (!fw_files[fw_set][i]) - continue; - sprintf(path, "pcxhr/%s", fw_files[fw_set][i]); -- if (request_firmware(&fw_entry, path, &mgr->pci->dev)) { -- dev_err(&mgr->pci->dev, -- "pcxhr: can't load firmware %s\n", -- path); -+ if (request_firmware(&fw_entry, path, &mgr->pci->dev)) - return -ENOENT; -- } - /* fake hwdep dsp record */ - err = pcxhr_dsp_load(mgr, i, fw_entry); - release_firmware(fw_entry); ---- a/sound/pci/riptide/riptide.c -+++ b/sound/pci/riptide/riptide.c -@@ -1222,11 +1222,8 @@ static int try_to_load_firmware(struct c - if (!chip->fw_entry) { - err = request_firmware(&chip->fw_entry, "riptide.hex", - &chip->pci->dev); -- if (err) { -- snd_printk(KERN_ERR -- "Riptide: Firmware not available %d\n", err); -+ if (err) - return -EIO; -- } - } - err = loadfirmware(cif, chip->fw_entry->data, chip->fw_entry->size); - if (err) { ---- a/sound/pci/rme9652/hdsp.c -+++ b/sound/pci/rme9652/hdsp.c -@@ -5171,11 +5171,8 @@ static int hdsp_request_fw_loader(struct - return -EINVAL; - } - -- if (request_firmware(&fw, fwfile, &hdsp->pci->dev)) { -- dev_err(hdsp->card->dev, -- "cannot load firmware %s\n", fwfile); -+ if (request_firmware(&fw, fwfile, &hdsp->pci->dev)) - return -ENOENT; -- } - if (fw->size < HDSP_FIRMWARE_SIZE) { - dev_err(hdsp->card->dev, - "too short firmware size %d (expected %d)\n", ---- a/sound/soc/codecs/wm2000.c -+++ b/sound/soc/codecs/wm2000.c -@@ -891,10 +891,8 @@ static int wm2000_i2c_probe(struct i2c_c - } - - ret = request_firmware(&fw, filename, &i2c->dev); -- if (ret != 0) { -- dev_err(&i2c->dev, "Failed to acquire ANC data: %d\n", ret); -+ if (ret != 0) - goto err_supplies; -- } - - /* Pre-cook the concatenation of the register address onto the image */ - wm2000->anc_download_size = fw->size + 2; ---- a/sound/usb/6fire/firmware.c -+++ b/sound/usb/6fire/firmware.c -@@ -203,8 +203,6 @@ static int usb6fire_fw_ezusb_upload( - ret = request_firmware(&fw, fwname, &device->dev); - if (ret < 0) { - kfree(rec); -- dev_err(&intf->dev, -- "error requesting ezusb firmware %s.\n", fwname); - return ret; - } - ret = usb6fire_fw_ihex_init(fw, rec); -@@ -280,8 +278,6 @@ static int usb6fire_fw_fpga_upload( - - ret = request_firmware(&fw, fwname, &device->dev); - if (ret < 0) { -- dev_err(&intf->dev, "unable to get fpga firmware %s.\n", -- fwname); - kfree(buffer); - return -EIO; - } |