diff options
Diffstat (limited to '')
26 files changed, 3553 insertions, 0 deletions
diff --git a/debian/patches/bugfix/all/cpupower-fix-checks-for-cpu-existence.patch b/debian/patches/bugfix/all/cpupower-fix-checks-for-cpu-existence.patch new file mode 100644 index 0000000000..d8352b8610 --- /dev/null +++ b/debian/patches/bugfix/all/cpupower-fix-checks-for-cpu-existence.patch @@ -0,0 +1,49 @@ +From: Ben Hutchings <ben@decadent.org.uk> +Date: Thu, 03 Nov 2016 15:25:26 -0600 +Subject: cpupower: Fix checks for CPU existence +Forwarded: https://lore.kernel.org/all/20170418023118.GD4152@decadent.org.uk/ + +Calls to cpufreq_cpu_exists(cpu) were converted to +cpupower_is_cpu_online(cpu) when libcpupower was introduced and the +former function was deleted. However, cpupower_is_cpu_online() does +not distinguish physically absent and offline CPUs, and does not set +errno. + +cpufreq-set has already been fixed (commit c25badc9ceb6). + +In cpufreq-bench, which prints an error message for offline CPUs, +properly distinguish and report the zero and negative cases. + +Fixes: ac5a181d065d ("cpupower: Add cpuidle parts into library") +Fixes: 53d1cd6b125f ("cpupowerutils: bench - Fix cpu online check") +Signed-off-by: Ben Hutchings <ben@decadent.org.uk> +[carnil: Update/Refresh patch for 4.14.17: The issue with the +incorrect check has been fixed with upstream commit 53d1cd6b125f. +Keep in the patch the distinction and report for the zero and +negative cases.] +--- +--- a/tools/power/cpupower/bench/system.c ++++ b/tools/power/cpupower/bench/system.c +@@ -58,12 +58,19 @@ long long int get_time() + + int set_cpufreq_governor(char *governor, unsigned int cpu) + { ++ int rc; + + dprintf("set %s as cpufreq governor\n", governor); + +- if (cpupower_is_cpu_online(cpu) != 1) { +- perror("cpufreq_cpu_exists"); +- fprintf(stderr, "error: cpu %u does not exist\n", cpu); ++ rc = cpupower_is_cpu_online(cpu); ++ if (rc != 1) { ++ if (rc < 0) ++ fprintf(stderr, "cpupower_is_cpu_online: %s\n", ++ strerror(-rc)); ++ else ++ fprintf(stderr, ++ "error: cpu %u is offline or does not exist\n", ++ cpu); + return -1; + } + diff --git a/debian/patches/bugfix/all/disable-some-marvell-phys.patch b/debian/patches/bugfix/all/disable-some-marvell-phys.patch new file mode 100644 index 0000000000..472e54ce5b --- /dev/null +++ b/debian/patches/bugfix/all/disable-some-marvell-phys.patch @@ -0,0 +1,91 @@ +From: Ian Campbell <ijc@hellion.org.uk> +Subject: phy/marvell: disable 4-port phys +Date: Wed, 20 Nov 2013 08:30:14 +0000 +Bug-Debian: https://bugs.debian.org/723177 +Forwarded: https://lore.kernel.org/netdev/1386932764.20787.85.camel@dagon.hellion.org.uk/ + +The Marvell PHY was originally disabled because it can cause networking +failures on some systems. According to Lennert Buytenhek this is because some +of the variants added did not share the same register layout. Since the known +cases are all 4-ports disable those variants (indicated by a 4 in the +penultimate position of the model name) until they can be audited for +correctness. + +[bwh: Also #if-out the init functions for these PHYs to avoid + compiler warnings] + +--- a/drivers/net/phy/marvell.c ++++ b/drivers/net/phy/marvell.c +@@ -1320,6 +1320,7 @@ static int m88e1118_config_init(struct phy_device *phydev) + return genphy_soft_reset(phydev); + } + ++#if 0 + static int m88e1149_config_init(struct phy_device *phydev) + { + int err; +@@ -1345,7 +1346,9 @@ static int m88e1149_config_init(struct phy_device *phydev) + + return genphy_soft_reset(phydev); + } ++#endif + ++#if 0 + static int m88e1145_config_init_rgmii(struct phy_device *phydev) + { + int err; +@@ -1423,6 +1426,7 @@ static int m88e1145_config_init(struct phy_device *phydev) + + return 0; + } ++#endif + + static int m88e1540_get_fld(struct phy_device *phydev, u8 *msecs) + { +@@ -3414,6 +3418,7 @@ static struct phy_driver marvell_drivers[] = { + .led_hw_control_set = m88e1318_led_hw_control_set, + .led_hw_control_get = m88e1318_led_hw_control_get, + }, ++#if 0 + { + .phy_id = MARVELL_PHY_ID_88E1145, + .phy_id_mask = MARVELL_PHY_ID_MASK, +@@ -3434,6 +3439,8 @@ static struct phy_driver marvell_drivers[] = { + .get_tunable = m88e1111_get_tunable, + .set_tunable = m88e1111_set_tunable, + }, ++#endif ++#if 0 + { + .phy_id = MARVELL_PHY_ID_88E1149R, + .phy_id_mask = MARVELL_PHY_ID_MASK, +@@ -3452,6 +3459,8 @@ static struct phy_driver marvell_drivers[] = { + .get_strings = marvell_get_strings, + .get_stats = marvell_get_stats, + }, ++#endif ++#if 0 + { + .phy_id = MARVELL_PHY_ID_88E1240, + .phy_id_mask = MARVELL_PHY_ID_MASK, +@@ -3472,6 +3481,7 @@ static struct phy_driver marvell_drivers[] = { + .get_tunable = m88e1011_get_tunable, + .set_tunable = m88e1011_set_tunable, + }, ++#endif + { + .phy_id = MARVELL_PHY_ID_88E1116R, + .phy_id_mask = MARVELL_PHY_ID_MASK, +@@ -3744,9 +4074,9 @@ static struct mdio_device_id __maybe_unused marvell_tbl[] = { + { MARVELL_PHY_ID_88E1111_FINISAR, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E1118, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E1121R, MARVELL_PHY_ID_MASK }, +- { MARVELL_PHY_ID_88E1145, MARVELL_PHY_ID_MASK }, +- { MARVELL_PHY_ID_88E1149R, MARVELL_PHY_ID_MASK }, +- { MARVELL_PHY_ID_88E1240, MARVELL_PHY_ID_MASK }, ++/* { MARVELL_PHY_ID_88E1145, MARVELL_PHY_ID_MASK }, */ ++/* { MARVELL_PHY_ID_88E1149R, MARVELL_PHY_ID_MASK }, */ ++/* { MARVELL_PHY_ID_88E1240, MARVELL_PHY_ID_MASK }, */ + { MARVELL_PHY_ID_88E1318S, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E1116R, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E1510, MARVELL_PHY_ID_MASK }, diff --git a/debian/patches/bugfix/all/firmware-remove-redundant-log-messages-from-drivers.patch b/debian/patches/bugfix/all/firmware-remove-redundant-log-messages-from-drivers.patch new file mode 100644 index 0000000000..e6eec33dd7 --- /dev/null +++ b/debian/patches/bugfix/all/firmware-remove-redundant-log-messages-from-drivers.patch @@ -0,0 +1,2396 @@ +From: Ben Hutchings <ben@decadent.org.uk> +Subject: firmware: Remove redundant log messages from drivers +Date: Sun, 09 Dec 2012 16:40:31 +0000 +Forwarded: no + +Now that firmware_class logs every success and failure consistently, +many other log messages can be removed from drivers. + +This will probably need to be split up into multiple patches prior to +upstream submission. + +--- a/arch/x86/kernel/cpu/microcode/amd.c ++++ b/arch/x86/kernel/cpu/microcode/amd.c +@@ -912,10 +912,8 @@ static enum ucode_state request_microcod + if (c->x86 >= 0x15) + snprintf(fw_name, sizeof(fw_name), "amd-ucode/microcode_amd_fam%.2xh.bin", c->x86); + +- if (request_firmware_direct(&fw, (const char *)fw_name, device)) { +- pr_debug("failed to load file %s\n", fw_name); ++ if (request_firmware_direct(&fw, (const char *)fw_name, device)) + goto out; +- } + + ret = UCODE_ERROR; + if (!verify_container(fw->data, fw->size, false)) +--- a/drivers/atm/fore200e.c ++++ b/drivers/atm/fore200e.c +@@ -2398,10 +2398,9 @@ static int fore200e_load_and_start_fw(st + int err; + + sprintf(buf, "%s%s", fore200e->bus->proc_name, FW_EXT); +- if ((err = request_firmware(&firmware, buf, fore200e->dev)) < 0) { +- printk(FORE200E "problem loading firmware image %s\n", fore200e->bus->model_name); ++ err = request_firmware(&firmware, buf, fore200e->dev); ++ if (err) + return err; +- } + + fw_data = (const __le32 *)firmware->data; + fw_size = firmware->size / sizeof(u32); +--- a/drivers/bluetooth/ath3k.c ++++ b/drivers/bluetooth/ath3k.c +@@ -381,10 +381,8 @@ static int ath3k_load_patch(struct usb_d + le32_to_cpu(fw_version.rom_version)); + + ret = request_firmware(&firmware, filename, &udev->dev); +- if (ret < 0) { +- BT_ERR("Patch file not found %s", filename); ++ if (ret) + return ret; +- } + + pt_rom_version = get_unaligned_le32(firmware->data + + firmware->size - 8); +@@ -444,10 +442,8 @@ static int ath3k_load_syscfg(struct usb_ + le32_to_cpu(fw_version.rom_version), clk_value, ".dfu"); + + ret = request_firmware(&firmware, filename, &udev->dev); +- if (ret < 0) { +- BT_ERR("Configuration file not found %s", filename); ++ if (ret) + return ret; +- } + + ret = ath3k_load_fwfile(udev, firmware); + release_firmware(firmware); +--- a/drivers/bluetooth/bcm203x.c ++++ b/drivers/bluetooth/bcm203x.c +@@ -173,7 +173,6 @@ static int bcm203x_probe(struct usb_inte + return -ENOMEM; + + if (request_firmware(&firmware, "BCM2033-MD.hex", &udev->dev) < 0) { +- BT_ERR("Mini driver request failed"); + usb_free_urb(data->urb); + return -EIO; + } +@@ -198,7 +197,6 @@ static int bcm203x_probe(struct usb_inte + release_firmware(firmware); + + if (request_firmware(&firmware, "BCM2033-FW.bin", &udev->dev) < 0) { +- BT_ERR("Firmware request failed"); + usb_free_urb(data->urb); + kfree(data->buffer); + return -EIO; +--- a/drivers/bluetooth/bfusb.c ++++ b/drivers/bluetooth/bfusb.c +@@ -639,10 +639,8 @@ static int bfusb_probe(struct usb_interf + skb_queue_head_init(&data->pending_q); + skb_queue_head_init(&data->completed_q); + +- if (request_firmware(&firmware, "bfubase.frm", &udev->dev) < 0) { +- BT_ERR("Firmware request failed"); ++ if (request_firmware(&firmware, "bfubase.frm", &udev->dev)) + goto done; +- } + + BT_DBG("firmware data %p size %zu", firmware->data, firmware->size); + +--- a/drivers/bluetooth/bt3c_cs.c ++++ b/drivers/bluetooth/bt3c_cs.c +@@ -569,10 +569,8 @@ static int bt3c_open(struct bt3c_info *i + + /* Load firmware */ + err = request_firmware(&firmware, "BT3CPCC.bin", &info->p_dev->dev); +- if (err < 0) { +- BT_ERR("Firmware request failed"); ++ if (err) + goto error; +- } + + err = bt3c_load_firmware(info, firmware->data, firmware->size); + +--- a/drivers/bluetooth/btmrvl_sdio.c ++++ b/drivers/bluetooth/btmrvl_sdio.c +@@ -470,8 +470,6 @@ static int btmrvl_sdio_download_helper(s + ret = request_firmware(&fw_helper, card->helper, + &card->func->dev); + if ((ret < 0) || !fw_helper) { +- BT_ERR("request_firmware(helper) failed, error code = %d", +- ret); + ret = -ENOENT; + goto done; + } +@@ -570,8 +568,6 @@ static int btmrvl_sdio_download_fw_w_hel + ret = request_firmware(&fw_firmware, card->firmware, + &card->func->dev); + if ((ret < 0) || !fw_firmware) { +- BT_ERR("request_firmware(firmware) failed, error code = %d", +- ret); + ret = -ENOENT; + goto done; + } +--- a/drivers/char/dsp56k.c ++++ b/drivers/char/dsp56k.c +@@ -142,11 +142,8 @@ static int dsp56k_upload(u_char __user * + } + err = request_firmware(&fw, fw_name, &pdev->dev); + platform_device_unregister(pdev); +- if (err) { +- printk(KERN_ERR "Failed to load image \"%s\" err %d\n", +- fw_name, err); ++ if (err) + return err; +- } + if (fw->size % 3) { + printk(KERN_ERR "Bogus length %d in image \"%s\"\n", + fw->size, fw_name); +--- a/drivers/dma/imx-sdma.c ++++ b/drivers/dma/imx-sdma.c +@@ -1933,11 +1933,8 @@ static void sdma_load_firmware(const str + const struct sdma_script_start_addrs *addr; + unsigned short *ram_code; + +- if (!fw) { +- dev_info(sdma->dev, "external firmware not found, using ROM firmware\n"); +- /* In this case we just use the ROM firmware. */ ++ if (!fw) + return; +- } + + if (fw->size < sizeof(*header)) + goto err_firmware; +--- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c ++++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c +@@ -2579,10 +2579,8 @@ gf100_gr_load_fw(struct gf100_gr *gr, co + if (ret) { + snprintf(f, sizeof(f), "nouveau/%s", name); + ret = request_firmware(&fw, f, device->dev); +- if (ret) { +- nvkm_error(subdev, "failed to load %s\n", name); ++ if (ret) + return ret; +- } + } + + blob->size = fw->size; +--- a/drivers/gpu/drm/radeon/ni.c ++++ b/drivers/gpu/drm/radeon/ni.c +@@ -820,9 +820,6 @@ int ni_init_microcode(struct radeon_devi + + out: + if (err) { +- if (err != -EINVAL) +- pr_err("ni_cp: Failed to load firmware \"%s\"\n", +- fw_name); + release_firmware(rdev->pfp_fw); + rdev->pfp_fw = NULL; + release_firmware(rdev->me_fw); +--- a/drivers/gpu/drm/radeon/r100.c ++++ b/drivers/gpu/drm/radeon/r100.c +@@ -1057,9 +1057,7 @@ static int r100_cp_init_microcode(struct + } + + err = request_firmware(&rdev->me_fw, fw_name, rdev->dev); +- if (err) { +- pr_err("radeon_cp: Failed to load firmware \"%s\"\n", fw_name); +- } else if (rdev->me_fw->size % 8) { ++ if (err == 0 && rdev->me_fw->size % 8) { + pr_err("radeon_cp: Bogus length %zu in firmware \"%s\"\n", + rdev->me_fw->size, fw_name); + err = -EINVAL; +--- a/drivers/gpu/drm/radeon/r600.c ++++ b/drivers/gpu/drm/radeon/r600.c +@@ -2600,9 +2600,6 @@ int r600_init_microcode(struct radeon_de + + out: + if (err) { +- if (err != -EINVAL) +- pr_err("r600_cp: Failed to load firmware \"%s\"\n", +- fw_name); + release_firmware(rdev->pfp_fw); + rdev->pfp_fw = NULL; + release_firmware(rdev->me_fw); +--- a/drivers/infiniband/hw/qib/qib_sd7220.c ++++ b/drivers/infiniband/hw/qib/qib_sd7220.c +@@ -406,10 +406,8 @@ int qib_sd7220_init(struct qib_devdata * + } + + ret = request_firmware(&fw, SD7220_FW_NAME, &dd->pcidev->dev); +- if (ret) { +- qib_dev_err(dd, "Failed to load IB SERDES image\n"); ++ if (ret) + goto done; +- } + + /* Substitute our deduced value for was_reset */ + ret = qib_ibsd_ucode_loaded(dd->pport, fw); +--- a/drivers/input/touchscreen/atmel_mxt_ts.c ++++ b/drivers/input/touchscreen/atmel_mxt_ts.c +@@ -2927,10 +2927,8 @@ static int mxt_load_fw(struct device *de + int ret; + + ret = request_firmware(&fw, fn, dev); +- if (ret) { +- dev_err(dev, "Unable to open firmware %s\n", fn); ++ if (ret) + return ret; +- } + + /* Check for incorrect enc file */ + ret = mxt_check_firmware_format(dev, fw); +--- a/drivers/isdn/hardware/mISDN/speedfax.c ++++ b/drivers/isdn/hardware/mISDN/speedfax.c +@@ -379,11 +379,8 @@ setup_instance(struct sfax_hw *card) + card->isar.owner = THIS_MODULE; + + err = request_firmware(&firmware, "isdn/ISAR.BIN", &card->pdev->dev); +- if (err < 0) { +- pr_info("%s: firmware request failed %d\n", +- card->name, err); ++ if (err) + goto error_fw; +- } + if (debug & DEBUG_HW) + pr_notice("%s: got firmware %zu bytes\n", + card->name, firmware->size); +--- a/drivers/media/common/siano/smscoreapi.c ++++ b/drivers/media/common/siano/smscoreapi.c +@@ -1152,10 +1152,8 @@ static int smscore_load_firmware_from_fi + return -EINVAL; + + rc = request_firmware(&fw, fw_filename, coredev->device); +- if (rc < 0) { +- pr_err("failed to open firmware file '%s'\n", fw_filename); ++ if (rc < 0) + return rc; +- } + pr_debug("read fw %s, buffer size=0x%zx\n", fw_filename, fw->size); + fw_buf = kmalloc(ALIGN(fw->size + sizeof(struct sms_firmware), + SMS_ALLOC_ALIGNMENT), GFP_KERNEL | coredev->gfp_buf_flags); +--- a/drivers/media/dvb-frontends/af9013.c ++++ b/drivers/media/dvb-frontends/af9013.c +@@ -1049,14 +1049,8 @@ static int af9013_download_firmware(stru + + /* Request the firmware, will block and timeout */ + ret = request_firmware(&firmware, name, &client->dev); +- if (ret) { +- dev_info(&client->dev, "firmware file '%s' not found %d\n", +- name, ret); ++ if (ret) + goto err; +- } +- +- dev_info(&client->dev, "downloading firmware from file '%s'\n", +- name); + + /* Write firmware checksum & size */ + for (i = 0; i < firmware->size; i++) +--- a/drivers/media/dvb-frontends/bcm3510.c ++++ b/drivers/media/dvb-frontends/bcm3510.c +@@ -636,10 +636,9 @@ static int bcm3510_download_firmware(str + int ret,i; + + deb_info("requesting firmware\n"); +- if ((ret = st->config->request_firmware(fe, &fw, BCM3510_DEFAULT_FIRMWARE)) < 0) { +- err("could not load firmware (%s): %d",BCM3510_DEFAULT_FIRMWARE,ret); ++ ret = st->config->request_firmware(fe, &fw, BCM3510_DEFAULT_FIRMWARE); ++ if (ret) + return ret; +- } + deb_info("got firmware: %zu\n", fw->size); + + b = fw->data; +--- a/drivers/media/dvb-frontends/cx24116.c ++++ b/drivers/media/dvb-frontends/cx24116.c +@@ -479,13 +479,8 @@ static int cx24116_firmware_ondemand(str + __func__, CX24116_DEFAULT_FIRMWARE); + ret = request_firmware(&fw, CX24116_DEFAULT_FIRMWARE, + state->i2c->dev.parent); +- printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", +- __func__); +- if (ret) { +- printk(KERN_ERR "%s: No firmware uploaded (timeout or file not found?)\n", +- __func__); ++ if (ret) + return ret; +- } + + /* Make sure we don't recurse back through here + * during loading */ +--- a/drivers/media/dvb-frontends/drxd_hard.c ++++ b/drivers/media/dvb-frontends/drxd_hard.c +@@ -891,10 +891,8 @@ static int load_firmware(struct drxd_sta + { + const struct firmware *fw; + +- if (request_firmware(&fw, fw_name, state->dev) < 0) { +- printk(KERN_ERR "drxd: firmware load failure [%s]\n", fw_name); ++ if (request_firmware(&fw, fw_name, state->dev)) + return -EIO; +- } + + state->microcode = kmemdup(fw->data, fw->size, GFP_KERNEL); + if (!state->microcode) { +--- a/drivers/media/dvb-frontends/drxk_hard.c ++++ b/drivers/media/dvb-frontends/drxk_hard.c +@@ -6228,10 +6228,6 @@ static void load_firmware_cb(const struc + + dprintk(1, ": %s\n", fw ? "firmware loaded" : "firmware not loaded"); + if (!fw) { +- pr_err("Could not load firmware file %s.\n", +- state->microcode_name); +- pr_info("Copy %s to your hotplug directory!\n", +- state->microcode_name); + state->microcode_name = NULL; + + /* +--- a/drivers/media/dvb-frontends/ds3000.c ++++ b/drivers/media/dvb-frontends/ds3000.c +@@ -348,12 +348,8 @@ static int ds3000_firmware_ondemand(stru + DS3000_DEFAULT_FIRMWARE); + ret = request_firmware(&fw, DS3000_DEFAULT_FIRMWARE, + state->i2c->dev.parent); +- printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", __func__); +- if (ret) { +- printk(KERN_ERR "%s: No firmware uploaded (timeout or file not found?)\n", +- __func__); ++ if (ret) + return ret; +- } + + ret = ds3000_load_firmware(fe, fw); + if (ret) +--- a/drivers/media/dvb-frontends/nxt200x.c ++++ b/drivers/media/dvb-frontends/nxt200x.c +@@ -861,12 +861,8 @@ static int nxt2002_init(struct dvb_front + __func__, NXT2002_DEFAULT_FIRMWARE); + ret = request_firmware(&fw, NXT2002_DEFAULT_FIRMWARE, + state->i2c->dev.parent); +- pr_debug("%s: Waiting for firmware upload(2)...\n", __func__); +- if (ret) { +- pr_err("%s: No firmware uploaded (timeout or file not found?)\n", +- __func__); ++ if (ret) + return ret; +- } + + ret = nxt2002_load_firmware(fe, fw); + release_firmware(fw); +@@ -928,12 +924,8 @@ static int nxt2004_init(struct dvb_front + __func__, NXT2004_DEFAULT_FIRMWARE); + ret = request_firmware(&fw, NXT2004_DEFAULT_FIRMWARE, + state->i2c->dev.parent); +- pr_debug("%s: Waiting for firmware upload(2)...\n", __func__); +- if (ret) { +- pr_err("%s: No firmware uploaded (timeout or file not found?)\n", +- __func__); ++ if (ret) + return ret; +- } + + ret = nxt2004_load_firmware(fe, fw); + release_firmware(fw); +--- a/drivers/media/dvb-frontends/or51132.c ++++ b/drivers/media/dvb-frontends/or51132.c +@@ -326,10 +326,8 @@ static int or51132_set_parameters(struct + printk("or51132: Waiting for firmware upload(%s)...\n", + fwname); + ret = request_firmware(&fw, fwname, state->i2c->dev.parent); +- if (ret) { +- printk(KERN_WARNING "or51132: No firmware uploaded(timeout or file not found?)\n"); ++ if (ret) + return ret; +- } + ret = or51132_load_firmware(fe, fw); + release_firmware(fw); + if (ret) { +--- a/drivers/media/dvb-frontends/or51211.c ++++ b/drivers/media/dvb-frontends/or51211.c +@@ -361,11 +361,8 @@ static int or51211_init(struct dvb_front + OR51211_DEFAULT_FIRMWARE); + ret = config->request_firmware(fe, &fw, + OR51211_DEFAULT_FIRMWARE); +- pr_info("Got Hotplug firmware\n"); +- if (ret) { +- pr_warn("No firmware uploaded (timeout or file not found?)\n"); ++ if (ret) + return ret; +- } + + ret = or51211_load_firmware(fe, fw); + release_firmware(fw); +--- a/drivers/media/dvb-frontends/sp887x.c ++++ b/drivers/media/dvb-frontends/sp887x.c +@@ -525,10 +525,8 @@ static int sp887x_init(struct dvb_fronte + /* request the firmware, this will block until someone uploads it */ + printk("sp887x: waiting for firmware upload (%s)...\n", SP887X_DEFAULT_FIRMWARE); + ret = state->config->request_firmware(fe, &fw, SP887X_DEFAULT_FIRMWARE); +- if (ret) { +- printk("sp887x: no firmware upload (timeout or file not found?)\n"); ++ if (ret) + return ret; +- } + + ret = sp887x_initial_setup(fe, fw); + release_firmware(fw); +--- a/drivers/media/dvb-frontends/tda10048.c ++++ b/drivers/media/dvb-frontends/tda10048.c +@@ -483,8 +483,6 @@ static int tda10048_firmware_upload(stru + ret = request_firmware(&fw, TDA10048_DEFAULT_FIRMWARE, + state->i2c->dev.parent); + if (ret) { +- printk(KERN_ERR "%s: Upload failed. (file not found?)\n", +- __func__); + return -EIO; + } else { + printk(KERN_INFO "%s: firmware read %zu bytes.\n", +--- a/drivers/media/dvb-frontends/tda1004x.c ++++ b/drivers/media/dvb-frontends/tda1004x.c +@@ -388,10 +388,8 @@ static int tda10045_fwupload(struct dvb_ + /* request the firmware, this will block until someone uploads it */ + printk(KERN_INFO "tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE); + ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE); +- if (ret) { +- printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n"); ++ if (ret) + return ret; +- } + + /* reset chip */ + tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0); +@@ -532,7 +530,6 @@ static int tda10046_fwupload(struct dvb_ + /* remain compatible to old bug: try to load with tda10045 image name */ + ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE); + if (ret) { +- printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n"); + return ret; + } else { + printk(KERN_INFO "tda1004x: please rename the firmware file to %s\n", +--- a/drivers/media/dvb-frontends/tda10071.c ++++ b/drivers/media/dvb-frontends/tda10071.c +@@ -838,12 +838,8 @@ static int tda10071_init(struct dvb_fron + + /* request the firmware, this will block and timeout */ + ret = request_firmware(&fw, fw_file, &client->dev); +- if (ret) { +- dev_err(&client->dev, +- "did not find the firmware file '%s' (status %d). You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware\n", +- fw_file, ret); ++ if (ret) + goto error; +- } + + /* init */ + for (i = 0; i < ARRAY_SIZE(tab2); i++) { +--- a/drivers/media/i2c/cx25840/cx25840-firmware.c ++++ b/drivers/media/i2c/cx25840/cx25840-firmware.c +@@ -113,10 +113,8 @@ int cx25840_loadfw(struct i2c_client *cl + if (is_cx231xx(state) && max_buf_size > 16) + max_buf_size = 16; + +- if (request_firmware(&fw, fwname, FWDEV(client)) != 0) { +- v4l_err(client, "unable to open firmware %s\n", fwname); ++ if (request_firmware(&fw, fwname, FWDEV(client)) != 0) + return -EINVAL; +- } + + start_fw_load(client); + +--- a/drivers/media/pci/bt8xx/bttv-cards.c ++++ b/drivers/media/pci/bt8xx/bttv-cards.c +@@ -3901,10 +3901,8 @@ static int pvr_boot(struct bttv *btv) + int rc; + + rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev); +- if (rc != 0) { +- pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr); ++ if (rc != 0) + return rc; +- } + rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size); + pr_info("%d: altera firmware upload %s\n", + btv->c.nr, (rc < 0) ? "failed" : "ok"); +--- a/drivers/media/pci/cx18/cx18-av-firmware.c ++++ b/drivers/media/pci/cx18/cx18-av-firmware.c +@@ -70,10 +70,8 @@ int cx18_av_loadfw(struct cx18 *cx) + int i; + int retries1 = 0; + +- if (request_firmware(&fw, FWFILE, &cx->pci_dev->dev) != 0) { +- CX18_ERR_DEV(sd, "unable to open firmware %s\n", FWFILE); ++ if (request_firmware(&fw, FWFILE, &cx->pci_dev->dev) != 0) + return -EINVAL; +- } + + /* The firmware load often has byte errors, so allow for several + retries, both at byte level and at the firmware load level. */ +--- a/drivers/media/pci/cx18/cx18-dvb.c ++++ b/drivers/media/pci/cx18/cx18-dvb.c +@@ -127,9 +127,7 @@ static int yuan_mpc718_mt352_reqfw(struc + int ret; + + ret = request_firmware(fw, fn, &cx->pci_dev->dev); +- if (ret) +- CX18_ERR("Unable to open firmware file %s\n", fn); +- else { ++ if (!ret) { + size_t sz = (*fw)->size; + if (sz < 2 || sz > 64 || (sz % 2) != 0) { + CX18_ERR("Firmware %s has a bad size: %lu bytes\n", +--- a/drivers/media/pci/cx18/cx18-firmware.c ++++ b/drivers/media/pci/cx18/cx18-firmware.c +@@ -92,11 +92,8 @@ static int load_cpu_fw_direct(const char + u32 __iomem *dst = (u32 __iomem *)mem; + const u32 *src; + +- if (request_firmware(&fw, fn, &cx->pci_dev->dev)) { +- CX18_ERR("Unable to open firmware %s\n", fn); +- CX18_ERR("Did you put the firmware in the hotplug firmware directory?\n"); ++ if (request_firmware(&fw, fn, &cx->pci_dev->dev)) + return -ENOMEM; +- } + + src = (const u32 *)fw->data; + +@@ -137,8 +134,6 @@ static int load_apu_fw_direct(const char + int sz; + + if (request_firmware(&fw, fn, &cx->pci_dev->dev)) { +- CX18_ERR("unable to open firmware %s\n", fn); +- CX18_ERR("did you put the firmware in the hotplug firmware directory?\n"); + cx18_setup_page(cx, 0); + return -ENOMEM; + } +--- a/drivers/media/pci/cx23885/cx23885-417.c ++++ b/drivers/media/pci/cx23885/cx23885-417.c +@@ -920,12 +920,8 @@ static int cx23885_load_firmware(struct + retval = request_firmware(&firmware, CX23885_FIRM_IMAGE_NAME, + &dev->pci->dev); + +- if (retval != 0) { +- pr_err("ERROR: Hotplug firmware request failed (%s).\n", +- CX23885_FIRM_IMAGE_NAME); +- pr_err("Please fix your hotplug setup, the board will not work without firmware loaded!\n"); ++ if (retval != 0) + return -1; +- } + + if (firmware->size != CX23885_FIRM_IMAGE_SIZE) { + pr_err("ERROR: Firmware size mismatch (have %zu, expected %d)\n", +--- a/drivers/media/pci/cx23885/cx23885-cards.c ++++ b/drivers/media/pci/cx23885/cx23885-cards.c +@@ -2480,10 +2480,7 @@ void cx23885_card_setup(struct cx23885_d + cinfo.rev, filename); + + ret = request_firmware(&fw, filename, &dev->pci->dev); +- if (ret != 0) +- pr_err("did not find the firmware file '%s'. You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware.", +- filename); +- else ++ if (ret == 0) + altera_init(&netup_config, fw); + + release_firmware(fw); +--- a/drivers/media/pci/cx88/cx88-blackbird.c ++++ b/drivers/media/pci/cx88/cx88-blackbird.c +@@ -462,12 +462,8 @@ static int blackbird_load_firmware(struc + retval = request_firmware(&firmware, CX2341X_FIRM_ENC_FILENAME, + &dev->pci->dev); + +- if (retval != 0) { +- pr_err("Hotplug firmware request failed (%s).\n", +- CX2341X_FIRM_ENC_FILENAME); +- pr_err("Please fix your hotplug setup, the board will not work without firmware loaded!\n"); ++ if (retval != 0) + return -EIO; +- } + + if (firmware->size != BLACKBIRD_FIRM_IMAGE_SIZE) { + pr_err("Firmware size mismatch (have %zd, expected %d)\n", +--- a/drivers/media/pci/ivtv/ivtv-firmware.c ++++ b/drivers/media/pci/ivtv/ivtv-firmware.c +@@ -68,8 +68,6 @@ retry: + release_firmware(fw); + return size; + } +- IVTV_ERR("Unable to open firmware %s (must be %ld bytes)\n", fn, size); +- IVTV_ERR("Did you put the firmware in the hotplug firmware directory?\n"); + return -ENOMEM; + } + +--- a/drivers/media/pci/ngene/ngene-core.c ++++ b/drivers/media/pci/ngene/ngene-core.c +@@ -1236,19 +1236,14 @@ static int ngene_load_firm(struct ngene + break; + } + +- if (request_firmware(&fw, fw_name, &dev->pci_dev->dev) < 0) { +- dev_err(pdev, "Could not load firmware file %s.\n", fw_name); +- dev_info(pdev, "Copy %s to your hotplug directory!\n", +- fw_name); ++ if (request_firmware(&fw, fw_name, &dev->pci_dev->dev)) + return -1; +- } + if (size == 0) + size = fw->size; + if (size != fw->size) { + dev_err(pdev, "Firmware %s has invalid size!", fw_name); + err = -1; + } else { +- dev_info(pdev, "Loading firmware file %s.\n", fw_name); + ngene_fw = (u8 *) fw->data; + err = ngene_command_load_firmware(dev, ngene_fw, size); + } +--- a/drivers/media/pci/saa7164/saa7164-fw.c ++++ b/drivers/media/pci/saa7164/saa7164-fw.c +@@ -405,11 +405,8 @@ int saa7164_downloadfirmware(struct saa7 + __func__, fwname); + + ret = request_firmware(&fw, fwname, &dev->pci->dev); +- if (ret) { +- printk(KERN_ERR "%s() Upload failed. (file not found?)\n", +- __func__); ++ if (ret) + return -ENOMEM; +- } + + printk(KERN_INFO "%s() firmware read %zu bytes.\n", + __func__, fw->size); +--- a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c ++++ b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c +@@ -65,10 +65,8 @@ int s5p_mfc_load_firmware(struct s5p_mfc + } + } + +- if (err != 0) { +- mfc_err("Firmware is not present in the /lib/firmware directory nor compiled in kernel\n"); ++ if (err != 0) + return -EINVAL; +- } + if (fw_blob->size > dev->fw_buf.size) { + mfc_err("MFC firmware is too big to be loaded\n"); + release_firmware(fw_blob); +--- a/drivers/media/radio/radio-wl1273.c ++++ b/drivers/media/radio/radio-wl1273.c +@@ -502,11 +502,8 @@ static int wl1273_fm_upload_firmware_pat + * Uploading the firmware patch is not always necessary, + * so we only print an info message. + */ +- if (request_firmware(&fw_p, fw_name, dev)) { +- dev_info(dev, "%s - %s not found\n", __func__, fw_name); +- ++ if (request_firmware(&fw_p, fw_name, dev)) + return 0; +- } + + ptr = (__u8 *) fw_p->data; + packet_num = ptr[0]; +--- a/drivers/media/radio/wl128x/fmdrv_common.c ++++ b/drivers/media/radio/wl128x/fmdrv_common.c +@@ -1240,10 +1240,8 @@ static int fm_download_firmware(struct f + + ret = request_firmware(&fw_entry, fw_name, + &fmdev->radio_dev->dev); +- if (ret < 0) { +- fmerr("Unable to read firmware(%s) content\n", fw_name); ++ if (ret) + return ret; +- } + fmdbg("Firmware(%s) length : %zu bytes\n", fw_name, fw_entry->size); + + fw_data = (void *)fw_entry->data; +--- a/drivers/media/tuners/xc2028.c ++++ b/drivers/media/tuners/xc2028.c +@@ -1366,7 +1366,6 @@ static void load_firmware_cb(const struc + + tuner_dbg("request_firmware_nowait(): %s\n", fw ? "OK" : "error"); + if (!fw) { +- tuner_err("Could not load firmware %s.\n", priv->fname); + priv->state = XC2028_NODEV; + return; + } +--- a/drivers/media/usb/cx231xx/cx231xx-417.c ++++ b/drivers/media/usb/cx231xx/cx231xx-417.c +@@ -983,11 +983,6 @@ static int cx231xx_load_firmware(struct + dev->dev); + + if (retval != 0) { +- dev_err(dev->dev, +- "ERROR: Hotplug firmware request failed (%s).\n", +- CX231xx_FIRM_IMAGE_NAME); +- dev_err(dev->dev, +- "Please fix your hotplug setup, the board will not work without firmware loaded!\n"); + vfree(p_current_fw); + vfree(p_buffer); + return retval; +--- a/drivers/media/usb/dvb-usb/dib0700_devices.c ++++ b/drivers/media/usb/dvb-usb/dib0700_devices.c +@@ -2401,12 +2401,9 @@ static int stk9090m_frontend_attach(stru + + dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80); + +- if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) { +- deb_info("%s: Upload failed. (file not found?)\n", __func__); ++ if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) + return -ENODEV; +- } else { +- deb_info("%s: firmware read %zu bytes.\n", __func__, state->frontend_firmware->size); +- } ++ deb_info("%s: firmware read %zu bytes.\n", __func__, state->frontend_firmware->size); + stk9090m_config.microcode_B_fe_size = state->frontend_firmware->size; + stk9090m_config.microcode_B_fe_buffer = state->frontend_firmware->data; + +@@ -2471,12 +2468,9 @@ static int nim9090md_frontend_attach(str + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + +- if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) { +- deb_info("%s: Upload failed. (file not found?)\n", __func__); ++ if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) + return -EIO; +- } else { +- deb_info("%s: firmware read %zu bytes.\n", __func__, state->frontend_firmware->size); +- } ++ deb_info("%s: firmware read %zu bytes.\n", __func__, state->frontend_firmware->size); + nim9090md_config[0].microcode_B_fe_size = state->frontend_firmware->size; + nim9090md_config[0].microcode_B_fe_buffer = state->frontend_firmware->data; + nim9090md_config[1].microcode_B_fe_size = state->frontend_firmware->size; +--- a/drivers/media/usb/dvb-usb/dvb-usb-firmware.c ++++ b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c +@@ -90,13 +90,9 @@ int dvb_usb_download_firmware(struct usb + int ret; + const struct firmware *fw = NULL; + +- if ((ret = request_firmware(&fw, props->firmware, &udev->dev)) != 0) { +- err("did not find the firmware file '%s' (status %d). You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware", +- props->firmware,ret); ++ ret = request_firmware(&fw, props->firmware, &udev->dev); ++ if (ret) + return ret; +- } +- +- info("downloading firmware from file '%s'",props->firmware); + + switch (props->usb_ctrl) { + case CYPRESS_AN2135: +--- a/drivers/media/usb/dvb-usb/gp8psk.c ++++ b/drivers/media/usb/dvb-usb/gp8psk.c +@@ -131,19 +131,14 @@ static int gp8psk_load_bcm4500fw(struct + const u8 *ptr; + u8 *buf; + if ((ret = request_firmware(&fw, bcm4500_firmware, +- &d->udev->dev)) != 0) { +- err("did not find the bcm4500 firmware file '%s' (status %d). You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware", +- bcm4500_firmware,ret); ++ &d->udev->dev)) != 0) + return ret; +- } + + ret = -EINVAL; + + if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0)) + goto out_rel_fw; + +- info("downloading bcm4500 firmware from file '%s'",bcm4500_firmware); +- + ptr = fw->data; + buf = kmalloc(64, GFP_KERNEL); + if (!buf) { +--- a/drivers/media/usb/dvb-usb/opera1.c ++++ b/drivers/media/usb/dvb-usb/opera1.c +@@ -459,8 +459,6 @@ static int opera1_xilinx_load_firmware(s + info("start downloading fpga firmware %s",filename); + + if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) { +- err("did not find the firmware file '%s'. You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware", +- filename); + return ret; + } else { + p = kmalloc(fw->size, GFP_KERNEL); +--- a/drivers/media/usb/go7007/go7007-driver.c ++++ b/drivers/media/usb/go7007/go7007-driver.c +@@ -84,10 +84,8 @@ static int go7007_load_encoder(struct go + u16 intr_val, intr_data; + + if (go->boot_fw == NULL) { +- if (request_firmware(&fw_entry, fw_name, go->dev)) { +- v4l2_err(go, "unable to load firmware from file \"%s\"\n", fw_name); ++ if (request_firmware(&fw_entry, fw_name, go->dev)) + return -1; +- } + if (fw_entry->size < 16 || memcmp(fw_entry->data, "WISGO7007FW", 11)) { + v4l2_err(go, "file \"%s\" does not appear to be go7007 firmware\n", fw_name); + release_firmware(fw_entry); +--- a/drivers/media/usb/go7007/go7007-fw.c ++++ b/drivers/media/usb/go7007/go7007-fw.c +@@ -1565,12 +1565,8 @@ int go7007_construct_fw_image(struct go7 + default: + return -1; + } +- if (request_firmware(&fw_entry, GO7007_FW_NAME, go->dev)) { +- dev_err(go->dev, +- "unable to load firmware from file \"%s\"\n", +- GO7007_FW_NAME); ++ if (request_firmware(&fw_entry, GO7007_FW_NAME, go->dev)) + return -1; +- } + code = kcalloc(codespace, 2, GFP_KERNEL); + if (code == NULL) + goto fw_failed; +--- a/drivers/media/usb/go7007/go7007-loader.c ++++ b/drivers/media/usb/go7007/go7007-loader.c +@@ -67,11 +67,8 @@ static int go7007_loader_probe(struct us + + dev_info(&interface->dev, "loading firmware %s\n", fw1); + +- if (request_firmware(&fw, fw1, &usbdev->dev)) { +- dev_err(&interface->dev, +- "unable to load firmware from file \"%s\"\n", fw1); ++ if (request_firmware(&fw, fw1, &usbdev->dev)) + goto failed2; +- } + ret = cypress_load_firmware(usbdev, fw, CYPRESS_FX2); + release_firmware(fw); + if (0 != ret) { +@@ -82,11 +79,8 @@ static int go7007_loader_probe(struct us + if (fw2 == NULL) + return 0; + +- if (request_firmware(&fw, fw2, &usbdev->dev)) { +- dev_err(&interface->dev, +- "unable to load firmware from file \"%s\"\n", fw2); ++ if (request_firmware(&fw, fw2, &usbdev->dev)) + goto failed2; +- } + ret = cypress_load_firmware(usbdev, fw, CYPRESS_FX2); + release_firmware(fw); + if (0 != ret) { +--- a/drivers/media/usb/gspca/vicam.c ++++ b/drivers/media/usb/gspca/vicam.c +@@ -230,10 +230,8 @@ static int sd_init(struct gspca_dev *gsp + + ret = request_ihex_firmware(&fw, VICAM_FIRMWARE, + &gspca_dev->dev->dev); +- if (ret) { +- pr_err("Failed to load \"vicam/firmware.fw\": %d\n", ret); ++ if (ret) + return ret; +- } + + firmware_buf = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!firmware_buf) { +--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c ++++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c +@@ -1370,25 +1370,6 @@ static int pvr2_locate_firmware(struct p + "request_firmware fatal error with code=%d",ret); + return ret; + } +- pvr2_trace(PVR2_TRACE_ERROR_LEGS, +- "***WARNING*** Device %s firmware seems to be missing.", +- fwtypename); +- pvr2_trace(PVR2_TRACE_ERROR_LEGS, +- "Did you install the pvrusb2 firmware files in their proper location?"); +- if (fwcount == 1) { +- pvr2_trace(PVR2_TRACE_ERROR_LEGS, +- "request_firmware unable to locate %s file %s", +- fwtypename,fwnames[0]); +- } else { +- pvr2_trace(PVR2_TRACE_ERROR_LEGS, +- "request_firmware unable to locate one of the following %s files:", +- fwtypename); +- for (idx = 0; idx < fwcount; idx++) { +- pvr2_trace(PVR2_TRACE_ERROR_LEGS, +- "request_firmware: Failed to find %s", +- fwnames[idx]); +- } +- } + return ret; + } + +--- a/drivers/media/usb/s2255/s2255drv.c ++++ b/drivers/media/usb/s2255/s2255drv.c +@@ -2276,10 +2276,8 @@ static int s2255_probe(struct usb_interf + } + /* load the first chunk */ + if (request_firmware(&dev->fw_data->fw, +- FIRMWARE_FILE_NAME, &dev->udev->dev)) { +- dev_err(&interface->dev, "sensoray 2255 failed to get firmware\n"); ++ FIRMWARE_FILE_NAME, &dev->udev->dev)) + goto errorREQFW; +- } + /* check the firmware is valid */ + fw_size = dev->fw_data->fw->size; + pdata = (__le32 *) &dev->fw_data->fw->data[fw_size - 8]; +--- a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c ++++ b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c +@@ -282,10 +282,8 @@ static int ttusb_boot_dsp(struct ttusb * + + err = request_firmware(&fw, "ttusb-budget/dspbootcode.bin", + &ttusb->dev->dev); +- if (err) { +- pr_err("failed to request firmware\n"); ++ if (err) + return err; +- } + + /* BootBlock */ + b[0] = 0xaa; +--- a/drivers/media/usb/ttusb-dec/ttusb_dec.c ++++ b/drivers/media/usb/ttusb-dec/ttusb_dec.c +@@ -1317,11 +1317,8 @@ static int ttusb_dec_boot_dsp(struct ttu + dprintk("%s\n", __func__); + + result = request_firmware(&fw_entry, dec->firmware_name, &dec->udev->dev); +- if (result) { +- printk(KERN_ERR "%s: Firmware (%s) unavailable.\n", +- __func__, dec->firmware_name); ++ if (result) + return result; +- } + + firmware = fw_entry->data; + firmware_size = fw_entry->size; +--- a/drivers/misc/ti-st/st_kim.c ++++ b/drivers/misc/ti-st/st_kim.c +@@ -288,11 +288,8 @@ static long download_firmware(struct kim + request_firmware(&kim_gdata->fw_entry, bts_scr_name, + &kim_gdata->kim_pdev->dev); + if (unlikely((err != 0) || (kim_gdata->fw_entry->data == NULL) || +- (kim_gdata->fw_entry->size == 0))) { +- pr_err(" request_firmware failed(errno %ld) for %s", err, +- bts_scr_name); ++ (kim_gdata->fw_entry->size == 0))) + return -EINVAL; +- } + ptr = (void *)kim_gdata->fw_entry->data; + len = kim_gdata->fw_entry->size; + /* +--- a/drivers/net/can/softing/softing_fw.c ++++ b/drivers/net/can/softing/softing_fw.c +@@ -226,11 +226,8 @@ int softing_load_app_fw(const char *file + int8_t type_end = 0, type_entrypoint = 0; + + ret = request_firmware(&fw, file, &card->pdev->dev); +- if (ret) { +- dev_alert(&card->pdev->dev, "request_firmware(%s) got %i\n", +- file, ret); ++ if (ret) + return ret; +- } + dev_dbg(&card->pdev->dev, "firmware(%s) got %lu bytes\n", + file, (unsigned long)fw->size); + /* parse the firmware */ +--- a/drivers/net/ethernet/3com/typhoon.c ++++ b/drivers/net/ethernet/3com/typhoon.c +@@ -1279,11 +1279,8 @@ typhoon_request_firmware(struct typhoon + return 0; + + err = request_firmware(&typhoon_fw, FIRMWARE_NAME, &tp->pdev->dev); +- if (err) { +- netdev_err(tp->dev, "Failed to load firmware \"%s\"\n", +- FIRMWARE_NAME); ++ if (err) + return err; +- } + + image_data = typhoon_fw->data; + remaining = typhoon_fw->size; +--- a/drivers/net/ethernet/adaptec/starfire.c ++++ b/drivers/net/ethernet/adaptec/starfire.c +@@ -1004,11 +1004,8 @@ static int netdev_open(struct net_device + #endif /* VLAN_SUPPORT */ + + retval = request_firmware(&fw_rx, FIRMWARE_RX, &np->pci_dev->dev); +- if (retval) { +- printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n", +- FIRMWARE_RX); ++ if (retval) + goto out_init; +- } + if (fw_rx->size % 4) { + printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n", + fw_rx->size, FIRMWARE_RX); +@@ -1016,11 +1013,8 @@ static int netdev_open(struct net_device + goto out_rx; + } + retval = request_firmware(&fw_tx, FIRMWARE_TX, &np->pci_dev->dev); +- if (retval) { +- printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n", +- FIRMWARE_TX); ++ if (retval) + goto out_rx; +- } + if (fw_tx->size % 4) { + printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n", + fw_tx->size, FIRMWARE_TX); +--- a/drivers/net/ethernet/alacritech/slicoss.c ++++ b/drivers/net/ethernet/alacritech/slicoss.c +@@ -1051,11 +1051,8 @@ static int slic_load_rcvseq_firmware(str + file = (sdev->model == SLIC_MODEL_OASIS) ? SLIC_RCV_FIRMWARE_OASIS : + SLIC_RCV_FIRMWARE_MOJAVE; + err = request_firmware(&fw, file, &sdev->pdev->dev); +- if (err) { +- dev_err(&sdev->pdev->dev, +- "failed to load receive sequencer firmware %s\n", file); ++ if (err) + return err; +- } + /* Do an initial sanity check concerning firmware size now. A further + * check follows below. + */ +@@ -1126,10 +1123,8 @@ static int slic_load_firmware(struct sli + file = (sdev->model == SLIC_MODEL_OASIS) ? SLIC_FIRMWARE_OASIS : + SLIC_FIRMWARE_MOJAVE; + err = request_firmware(&fw, file, &sdev->pdev->dev); +- if (err) { +- dev_err(&sdev->pdev->dev, "failed to load firmware %s\n", file); ++ if (err) + return err; +- } + /* Do an initial sanity check concerning firmware size now. A further + * check follows below. + */ +--- a/drivers/net/ethernet/alteon/acenic.c ++++ b/drivers/net/ethernet/alteon/acenic.c +@@ -2877,11 +2877,8 @@ static int ace_load_firmware(struct net_ + fw_name = "acenic/tg1.bin"; + + ret = request_firmware(&fw, fw_name, &ap->pdev->dev); +- if (ret) { +- printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n", +- ap->name, fw_name); ++ if (ret) + return ret; +- } + + fw_data = (void *)fw->data; + +--- a/drivers/net/ethernet/broadcom/bnx2.c ++++ b/drivers/net/ethernet/broadcom/bnx2.c +@@ -3710,16 +3710,13 @@ static int bnx2_request_uncached_firmwar + } + + rc = request_firmware(&bp->mips_firmware, mips_fw_file, &bp->pdev->dev); +- if (rc) { +- pr_err("Can't load firmware file \"%s\"\n", mips_fw_file); ++ if (rc) + goto out; +- } + + rc = request_firmware(&bp->rv2p_firmware, rv2p_fw_file, &bp->pdev->dev); +- if (rc) { +- pr_err("Can't load firmware file \"%s\"\n", rv2p_fw_file); ++ if (rc) + goto err_release_mips_firmware; +- } ++ + mips_fw = (const struct bnx2_mips_fw_file *) bp->mips_firmware->data; + rv2p_fw = (const struct bnx2_rv2p_fw_file *) bp->rv2p_firmware->data; + if (bp->mips_firmware->size < sizeof(*mips_fw) || +--- a/drivers/net/ethernet/broadcom/tg3.c ++++ b/drivers/net/ethernet/broadcom/tg3.c +@@ -11394,11 +11394,8 @@ static int tg3_request_firmware(struct t + { + const struct tg3_firmware_hdr *fw_hdr; + +- if (request_firmware(&tp->fw, tp->fw_needed, &tp->pdev->dev)) { +- netdev_err(tp->dev, "Failed to load firmware \"%s\"\n", +- tp->fw_needed); ++ if (request_firmware(&tp->fw, tp->fw_needed, &tp->pdev->dev)) + return -ENOENT; +- } + + fw_hdr = (struct tg3_firmware_hdr *)tp->fw->data; + +--- a/drivers/net/ethernet/brocade/bna/cna_fwimg.c ++++ b/drivers/net/ethernet/brocade/bna/cna_fwimg.c +@@ -24,10 +24,8 @@ cna_read_firmware(struct pci_dev *pdev, + const struct firmware *fw; + u32 n; + +- if (request_firmware(&fw, fw_name, &pdev->dev)) { +- dev_alert(&pdev->dev, "can't load firmware %s\n", fw_name); ++ if (request_firmware(&fw, fw_name, &pdev->dev)) + goto error; +- } + + *bfi_image = (u32 *)fw->data; + *bfi_image_size = fw->size/sizeof(u32); +--- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c ++++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c +@@ -1035,12 +1035,8 @@ int t3_get_edc_fw(struct cphy *phy, int + fw_name = get_edc_fw_name(edc_idx); + if (fw_name) + ret = request_firmware(&fw, fw_name, &adapter->pdev->dev); +- if (ret < 0) { +- dev_err(&adapter->pdev->dev, +- "could not upgrade firmware: unable to load %s\n", +- fw_name); ++ if (ret) + return ret; +- } + + /* check size, take checksum in account */ + if (fw->size > size + 4) { +@@ -1077,11 +1073,8 @@ static int upgrade_fw(struct adapter *ad + struct device *dev = &adap->pdev->dev; + + ret = request_firmware(&fw, FW_FNAME, dev); +- if (ret < 0) { +- dev_err(dev, "could not upgrade firmware: unable to load %s\n", +- FW_FNAME); ++ if (ret) + return ret; +- } + ret = t3_load_fw(adap, fw->data, fw->size); + release_firmware(fw); + +@@ -1126,11 +1119,8 @@ static int update_tpsram(struct adapter + snprintf(buf, sizeof(buf), TPSRAM_NAME, rev); + + ret = request_firmware(&tpsram, buf, dev); +- if (ret < 0) { +- dev_err(dev, "could not load TP SRAM: unable to load %s\n", +- buf); ++ if (ret) + return ret; +- } + + ret = t3_check_tpsram(adap, tpsram->data, tpsram->size); + if (ret) +--- a/drivers/net/ethernet/intel/e100.c ++++ b/drivers/net/ethernet/intel/e100.c +@@ -1262,9 +1262,6 @@ static const struct firmware *e100_reque + + if (err) { + if (required) { +- netif_err(nic, probe, nic->netdev, +- "Failed to load firmware \"%s\": %d\n", +- fw_name, err); + return ERR_PTR(err); + } else { + netif_info(nic, probe, nic->netdev, +--- a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c ++++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c +@@ -580,8 +580,6 @@ static int myri10ge_load_hotplug_firmwar + unsigned i; + + if (request_firmware(&fw, mgp->fw_name, dev) < 0) { +- dev_err(dev, "Unable to load %s firmware image via hotplug\n", +- mgp->fw_name); + status = -EINVAL; + goto abort_with_nothing; + } +--- a/drivers/net/ethernet/smsc/smc91c92_cs.c ++++ b/drivers/net/ethernet/smsc/smc91c92_cs.c +@@ -651,10 +651,8 @@ static int osi_load_firmware(struct pcmc + int i, err; + + err = request_firmware(&fw, FIRMWARE_NAME, &link->dev); +- if (err) { +- pr_err("Failed to load firmware \"%s\"\n", FIRMWARE_NAME); ++ if (err) + return err; +- } + + /* Download the Seven of Diamonds firmware */ + for (i = 0; i < fw->size; i++) { +--- a/drivers/net/ethernet/sun/cassini.c ++++ b/drivers/net/ethernet/sun/cassini.c +@@ -792,11 +792,8 @@ static void cas_saturn_firmware_init(str + return; + + err = request_firmware(&fw, fw_name, &cp->pdev->dev); +- if (err) { +- pr_err("Failed to load firmware \"%s\"\n", +- fw_name); ++ if (err) + return; +- } + if (fw->size < 2) { + pr_err("bogus length %zu in \"%s\"\n", + fw->size, fw_name); +--- a/drivers/net/hamradio/yam.c ++++ b/drivers/net/hamradio/yam.c +@@ -357,11 +357,8 @@ static unsigned char *add_mcs(unsigned c + } + err = request_firmware(&fw, fw_name[predef], &pdev->dev); + platform_device_unregister(pdev); +- if (err) { +- printk(KERN_ERR "Failed to load firmware \"%s\"\n", +- fw_name[predef]); ++ if (err) + return NULL; +- } + if (fw->size != YAM_FPGA_SIZE) { + printk(KERN_ERR "Bogus length %zu in firmware \"%s\"\n", + fw->size, fw_name[predef]); +--- a/drivers/net/usb/kaweth.c ++++ b/drivers/net/usb/kaweth.c +@@ -305,10 +305,8 @@ static int kaweth_download_firmware(stru + int ret; + + ret = request_firmware(&fw, fwname, &kaweth->dev->dev); +- if (ret) { +- dev_err(&kaweth->intf->dev, "Firmware request failed\n"); ++ if (ret) + return ret; +- } + + if (fw->size > KAWETH_FIRMWARE_BUF_SIZE) { + dev_err(&kaweth->intf->dev, "Firmware too big: %zu\n", +--- a/drivers/net/wireless/ath/ath9k/hif_usb.c ++++ b/drivers/net/wireless/ath/ath9k/hif_usb.c +@@ -1250,9 +1250,6 @@ static void ath9k_hif_usb_firmware_cb(co + if (!ret) + return; + +- dev_err(&hif_dev->udev->dev, +- "ath9k_htc: Failed to get firmware %s\n", +- hif_dev->fw_name); + goto err_fw; + } + +--- a/drivers/net/wireless/ath/carl9170/usb.c ++++ b/drivers/net/wireless/ath/carl9170/usb.c +@@ -1029,7 +1029,6 @@ static void carl9170_usb_firmware_step2( + return; + } + +- dev_err(&ar->udev->dev, "firmware not found.\n"); + carl9170_usb_firmware_failed(ar); + } + +--- a/drivers/net/wireless/atmel/at76c50x-usb.c ++++ b/drivers/net/wireless/atmel/at76c50x-usb.c +@@ -1616,13 +1616,8 @@ static struct fwentry *at76_load_firmwar + + at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname); + ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev); +- if (ret < 0) { +- dev_err(&udev->dev, "firmware %s not found!\n", +- fwe->fwname); +- dev_err(&udev->dev, +- "you may need to download the firmware from http://developer.berlios.de/projects/at76c503a/\n"); ++ if (ret) + goto exit; +- } + + at76_dbg(DBG_FW, "got it."); + fwh = (struct at76_fw_header *)(fwe->fw->data); +--- a/drivers/net/wireless/atmel/atmel.c ++++ b/drivers/net/wireless/atmel/atmel.c +@@ -3892,12 +3892,8 @@ static int reset_atmel_card(struct net_d + strcpy(priv->firmware_id, "atmel_at76c502.bin"); + } + err = request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev); +- if (err != 0) { +- printk(KERN_ALERT +- "%s: firmware %s is missing, cannot continue.\n", +- dev->name, priv->firmware_id); ++ if (err != 0) + return err; +- } + } else { + int fw_index = 0; + int success = 0; +--- a/drivers/net/wireless/broadcom/b43/main.c ++++ b/drivers/net/wireless/broadcom/b43/main.c +@@ -2245,19 +2245,8 @@ int b43_do_request_fw(struct b43_request + } + err = request_firmware(&ctx->blob, ctx->fwname, + ctx->dev->dev->dev); +- if (err == -ENOENT) { +- snprintf(ctx->errors[ctx->req_type], +- sizeof(ctx->errors[ctx->req_type]), +- "Firmware file \"%s\" not found\n", +- ctx->fwname); ++ if (err) + return err; +- } else if (err) { +- snprintf(ctx->errors[ctx->req_type], +- sizeof(ctx->errors[ctx->req_type]), +- "Firmware file \"%s\" request failed (err=%d)\n", +- ctx->fwname, err); +- return err; +- } + fw_ready: + if (ctx->blob->size < sizeof(struct b43_fw_header)) + goto err_format; +--- a/drivers/net/wireless/broadcom/b43legacy/main.c ++++ b/drivers/net/wireless/broadcom/b43legacy/main.c +@@ -1524,11 +1524,8 @@ static int do_request_fw(struct b43legac + } else { + err = request_firmware(fw, path, dev->dev->dev); + } +- if (err) { +- b43legacyerr(dev->wl, "Firmware file \"%s\" not found " +- "or load failed.\n", path); ++ if (err) + return err; +- } + if ((*fw)->size < sizeof(struct b43legacy_fw_header)) + goto err_format; + hdr = (struct b43legacy_fw_header *)((*fw)->data); +--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c +@@ -376,19 +376,13 @@ static int brcms_request_fw(struct brcms + sprintf(fw_name, "%s-%d.fw", brcms_firmwares[i], + UCODE_LOADER_API_VER); + status = request_firmware(&wl->fw.fw_bin[i], fw_name, device); +- if (status) { +- wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n", +- KBUILD_MODNAME, fw_name); ++ if (status) + return status; +- } + sprintf(fw_name, "%s_hdr-%d.fw", brcms_firmwares[i], + UCODE_LOADER_API_VER); + status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device); +- if (status) { +- wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n", +- KBUILD_MODNAME, fw_name); ++ if (status) + return status; +- } + wl->fw.hdr_num_entries[i] = + wl->fw.fw_hdr[i]->size / (sizeof(struct firmware_hdr)); + } +--- a/drivers/net/wireless/intel/ipw2x00/ipw2100.c ++++ b/drivers/net/wireless/intel/ipw2x00/ipw2100.c +@@ -8359,12 +8359,8 @@ static int ipw2100_get_firmware(struct i + + rc = request_firmware(&fw->fw_entry, fw_name, &priv->pci_dev->dev); + +- if (rc < 0) { +- printk(KERN_ERR DRV_NAME ": " +- "%s: Firmware '%s' not available or load failed.\n", +- priv->net_dev->name, fw_name); ++ if (rc) + return rc; +- } + IPW_DEBUG_INFO("firmware data %p size %zd\n", fw->fw_entry->data, + fw->fw_entry->size); + +--- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c ++++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c +@@ -3350,10 +3350,8 @@ static int ipw_get_fw(struct ipw_priv *p + + /* ask firmware_class module to get the boot firmware off disk */ + rc = request_firmware(raw, name, &priv->pci_dev->dev); +- if (rc < 0) { +- IPW_ERROR("%s request_firmware failed: Reason %d\n", name, rc); ++ if (rc) + return rc; +- } + + if ((*raw)->size < sizeof(*fw)) { + IPW_ERROR("%s is too small (%zd)\n", name, (*raw)->size); +--- a/drivers/net/wireless/intel/iwlegacy/3945-mac.c ++++ b/drivers/net/wireless/intel/iwlegacy/3945-mac.c +@@ -1829,7 +1829,6 @@ il3945_read_ucode(struct il_priv *il) + sprintf(buf, "%s%u%s", name_pre, idx, ".ucode"); + ret = request_firmware(&ucode_raw, buf, &il->pci_dev->dev); + if (ret < 0) { +- IL_ERR("%s firmware file req failed: %d\n", buf, ret); + if (ret == -ENOENT) + continue; + else +--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c ++++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c +@@ -241,8 +241,6 @@ static int iwl_request_firmware(struct i + drv->fw_index--; + + if (drv->fw_index < cfg->ucode_api_min) { +- IWL_ERR(drv, "no suitable firmware found!\n"); +- + if (cfg->ucode_api_min == cfg->ucode_api_max) { + IWL_ERR(drv, "%s-%d is required\n", fw_name_pre, + cfg->ucode_api_max); +--- a/drivers/net/wireless/intersil/orinoco/fw.c ++++ b/drivers/net/wireless/intersil/orinoco/fw.c +@@ -132,7 +132,6 @@ orinoco_dl_firmware(struct orinoco_priva + err = request_firmware(&fw_entry, firmware, priv->dev); + + if (err) { +- dev_err(dev, "Cannot find firmware %s\n", firmware); + err = -ENOENT; + goto free; + } +@@ -292,10 +291,8 @@ symbol_dl_firmware(struct orinoco_privat + const struct firmware *fw_entry; + + if (!orinoco_cached_fw_get(priv, true)) { +- if (request_firmware(&fw_entry, fw->pri_fw, priv->dev) != 0) { +- dev_err(dev, "Cannot find firmware: %s\n", fw->pri_fw); ++ if (request_firmware(&fw_entry, fw->pri_fw, priv->dev) != 0) + return -ENOENT; +- } + } else + fw_entry = orinoco_cached_fw_get(priv, true); + +@@ -311,10 +308,8 @@ symbol_dl_firmware(struct orinoco_privat + } + + if (!orinoco_cached_fw_get(priv, false)) { +- if (request_firmware(&fw_entry, fw->sta_fw, priv->dev) != 0) { +- dev_err(dev, "Cannot find firmware: %s\n", fw->sta_fw); ++ if (request_firmware(&fw_entry, fw->sta_fw, priv->dev) != 0) + return -ENOENT; +- } + } else + fw_entry = orinoco_cached_fw_get(priv, false); + +--- a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c ++++ b/drivers/net/wireless/intersil/orinoco/orinoco_usb.c +@@ -1708,7 +1708,6 @@ static int ezusb_probe(struct usb_interf + if (ezusb_firmware_download(upriv, &firmware) < 0) + goto error; + } else { +- err("No firmware to download"); + goto error; + } + +--- a/drivers/net/wireless/intersil/p54/p54pci.c ++++ b/drivers/net/wireless/intersil/p54/p54pci.c +@@ -502,7 +502,6 @@ static void p54p_firmware_step2(const st + int err; + + if (!fw) { +- dev_err(&pdev->dev, "Cannot find firmware (isl3886pci)\n"); + err = -ENOENT; + goto out; + } +--- a/drivers/net/wireless/intersil/p54/p54spi.c ++++ b/drivers/net/wireless/intersil/p54/p54spi.c +@@ -158,10 +158,8 @@ static int p54spi_request_firmware(struc + /* FIXME: should driver use it's own struct device? */ + ret = request_firmware(&priv->firmware, "3826.arm", &priv->spi->dev); + +- if (ret < 0) { +- dev_err(&priv->spi->dev, "request_firmware() failed: %d", ret); ++ if (ret) + return ret; +- } + + ret = p54_parse_firmware(dev, priv->firmware); + if (ret) { +--- a/drivers/net/wireless/intersil/p54/p54usb.c ++++ b/drivers/net/wireless/intersil/p54/p54usb.c +@@ -929,7 +929,6 @@ static void p54u_load_firmware_cb(const + err = p54u_start_ops(priv); + } else { + err = -ENOENT; +- dev_err(&udev->dev, "Firmware not found.\n"); + } + + complete(&priv->fw_wait_load); +--- a/drivers/net/wireless/marvell/libertas_tf/if_usb.c ++++ b/drivers/net/wireless/marvell/libertas_tf/if_usb.c +@@ -820,8 +820,6 @@ static int if_usb_prog_firmware(struct l + kernel_param_lock(THIS_MODULE); + ret = request_firmware(&cardp->fw, lbtf_fw_name, &cardp->udev->dev); + if (ret < 0) { +- pr_err("request_firmware() failed with %#x\n", ret); +- pr_err("firmware %s not found\n", lbtf_fw_name); + kernel_param_unlock(THIS_MODULE); + goto done; + } +--- a/drivers/net/wireless/marvell/mwifiex/main.c ++++ b/drivers/net/wireless/marvell/mwifiex/main.c +@@ -549,11 +549,8 @@ static int _mwifiex_fw_dpc(const struct + struct wireless_dev *wdev; + struct completion *fw_done = adapter->fw_done; + +- if (!firmware) { +- mwifiex_dbg(adapter, ERROR, +- "Failed to get firmware %s\n", adapter->fw_name); ++ if (!firmware) + goto err_dnld_fw; +- } + + memset(&fw, 0, sizeof(struct mwifiex_fw_image)); + adapter->firmware = firmware; +--- a/drivers/net/wireless/marvell/mwl8k.c ++++ b/drivers/net/wireless/marvell/mwl8k.c +@@ -5736,16 +5736,12 @@ static int mwl8k_firmware_load_success(s + static void mwl8k_fw_state_machine(const struct firmware *fw, void *context) + { + struct mwl8k_priv *priv = context; +- struct mwl8k_device_info *di = priv->device_info; + int rc; + + switch (priv->fw_state) { + case FW_STATE_INIT: +- if (!fw) { +- printk(KERN_ERR "%s: Error requesting helper fw %s\n", +- pci_name(priv->pdev), di->helper_image); ++ if (!fw) + goto fail; +- } + priv->fw_helper = fw; + rc = mwl8k_request_fw(priv, priv->fw_pref, &priv->fw_ucode, + true); +@@ -5780,11 +5776,8 @@ static void mwl8k_fw_state_machine(const + break; + + case FW_STATE_LOADING_ALT: +- if (!fw) { +- printk(KERN_ERR "%s: Error requesting alt fw %s\n", +- pci_name(priv->pdev), di->helper_image); ++ if (!fw) + goto fail; +- } + priv->fw_ucode = fw; + rc = mwl8k_firmware_load_success(priv); + if (rc) +@@ -5822,10 +5815,8 @@ retry: + + /* Ask userland hotplug daemon for the device firmware */ + rc = mwl8k_request_firmware(priv, fw_image, nowait); +- if (rc) { +- wiphy_err(hw->wiphy, "Firmware files not found\n"); ++ if (rc) + return rc; +- } + + if (nowait) + return rc; +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00firmware.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00firmware.c +@@ -38,10 +38,8 @@ static int rt2x00lib_request_firmware(st + rt2x00_info(rt2x00dev, "Loading firmware file '%s'\n", fw_name); + + retval = request_firmware(&fw, fw_name, device); +- if (retval) { +- rt2x00_err(rt2x00dev, "Failed to request Firmware\n"); ++ if (retval) + return retval; +- } + + if (!fw || !fw->size || !fw->data) { + rt2x00_err(rt2x00dev, "Failed to read Firmware\n"); +--- a/drivers/net/wireless/realtek/rtlwifi/core.c ++++ b/drivers/net/wireless/realtek/rtlwifi/core.c +@@ -88,7 +88,6 @@ static void rtl_fw_do_work(const struct + if (!err) + goto found_alt; + } +- pr_err("Selected firmware is not available\n"); + rtlpriv->max_fw_size = 0; + goto exit; + } +--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c ++++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c +@@ -63,13 +63,11 @@ static void rtl92se_fw_cb(const struct f + struct ieee80211_hw *hw = context; + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rt_firmware *pfirmware = NULL; +- char *fw_name = "rtlwifi/rtl8192sefw.bin"; + + rtl_dbg(rtlpriv, COMP_ERR, DBG_LOUD, + "Firmware callback routine entered!\n"); + complete(&rtlpriv->firmware_loading_complete); + if (!firmware) { +- pr_err("Firmware %s not available\n", fw_name); + rtlpriv->max_fw_size = 0; + return; + } +--- a/drivers/net/wireless/ti/wl1251/main.c ++++ b/drivers/net/wireless/ti/wl1251/main.c +@@ -57,10 +57,8 @@ static int wl1251_fetch_firmware(struct + + ret = request_firmware(&fw, WL1251_FW_NAME, dev); + +- if (ret < 0) { +- wl1251_error("could not get firmware: %d", ret); ++ if (ret) + return ret; +- } + + if (fw->size % 4) { + wl1251_error("firmware size is not multiple of 32 bits: %zu", +@@ -96,10 +94,8 @@ static int wl1251_fetch_nvs(struct wl125 + + ret = request_firmware(&fw, WL1251_NVS_NAME, dev); + +- if (ret < 0) { +- wl1251_error("could not get nvs file: %d", ret); ++ if (ret) + return ret; +- } + + if (fw->size % 4) { + wl1251_error("nvs size is not multiple of 32 bits: %zu", +--- a/drivers/net/wireless/ti/wlcore/main.c ++++ b/drivers/net/wireless/ti/wlcore/main.c +@@ -756,10 +756,8 @@ static int wl12xx_fetch_firmware(struct + + ret = request_firmware(&fw, fw_name, wl->dev); + +- if (ret < 0) { +- wl1271_error("could not get firmware %s: %d", fw_name, ret); ++ if (ret) + return ret; +- } + + if (fw->size % 4) { + wl1271_error("firmware size is not multiple of 32 bits: %zu", +--- a/drivers/net/wireless/zydas/zd1201.c ++++ b/drivers/net/wireless/zydas/zd1201.c +@@ -62,8 +62,6 @@ static int zd1201_fw_upload(struct usb_d + + err = request_firmware(&fw_entry, fwfile, &dev->dev); + if (err) { +- dev_err(&dev->dev, "Failed to load %s firmware file!\n", fwfile); +- dev_err(&dev->dev, "Make sure the hotplug firmware loader is installed.\n"); + dev_err(&dev->dev, "Goto http://linux-lc100020.sourceforge.net for more info.\n"); + return err; + } +--- a/drivers/net/wireless/zydas/zd1211rw/zd_usb.c ++++ b/drivers/net/wireless/zydas/zd1211rw/zd_usb.c +@@ -107,16 +107,9 @@ static void int_urb_complete(struct urb + static int request_fw_file( + const struct firmware **fw, const char *name, struct device *device) + { +- int r; +- + dev_dbg_f(device, "fw name %s\n", name); + +- r = request_firmware(fw, name, device); +- if (r) +- dev_err(device, +- "Could not load firmware file %s. Error number %d\n", +- name, r); +- return r; ++ return request_firmware(fw, name, device); + } + + static inline u16 get_bcdDevice(const struct usb_device *udev) +--- a/drivers/scsi/advansys.c ++++ b/drivers/scsi/advansys.c +@@ -4054,8 +4054,6 @@ static int AscInitAsc1000Driver(ASC_DVC_ + + err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); + if (err) { +- printk(KERN_ERR "Failed to load image \"%s\" err %d\n", +- fwname, err); + asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM; + return err; + } +@@ -4420,8 +4418,6 @@ static int AdvInitAsc3550Driver(ADV_DVC_ + + err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); + if (err) { +- printk(KERN_ERR "Failed to load image \"%s\" err %d\n", +- fwname, err); + asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; + return err; + } +@@ -4920,8 +4916,6 @@ static int AdvInitAsc38C0800Driver(ADV_D + + err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); + if (err) { +- printk(KERN_ERR "Failed to load image \"%s\" err %d\n", +- fwname, err); + asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; + return err; + } +@@ -5408,8 +5402,6 @@ static int AdvInitAsc38C1600Driver(ADV_D + + err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); + if (err) { +- printk(KERN_ERR "Failed to load image \"%s\" err %d\n", +- fwname, err); + asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; + return err; + } +--- a/drivers/scsi/aic94xx/aic94xx_init.c ++++ b/drivers/scsi/aic94xx/aic94xx_init.c +@@ -370,8 +370,6 @@ static ssize_t asd_store_update_bios(str + filename_ptr, + &asd_ha->pcidev->dev); + if (err) { +- asd_printk("Failed to load bios image file %s, error %d\n", +- filename_ptr, err); + err = FAIL_OPEN_BIOS_FILE; + goto out1; + } +--- a/drivers/scsi/aic94xx/aic94xx_seq.c ++++ b/drivers/scsi/aic94xx/aic94xx_seq.c +@@ -1302,11 +1302,8 @@ int asd_init_seqs(struct asd_ha_struct * + + err = asd_request_firmware(asd_ha); + +- if (err) { +- asd_printk("Failed to load sequencer firmware file %s, error %d\n", +- SAS_RAZOR_SEQUENCER_FW_FILE, err); ++ if (err) + return err; +- } + + err = asd_seq_download_seqs(asd_ha); + if (err) { +--- a/drivers/scsi/bfa/bfad.c ++++ b/drivers/scsi/bfa/bfad.c +@@ -1737,7 +1737,6 @@ bfad_read_firmware(struct pci_dev *pdev, + const struct firmware *fw; + + if (request_firmware(&fw, fw_name, &pdev->dev)) { +- printk(KERN_ALERT "Can't locate firmware %s\n", fw_name); + *bfi_image = NULL; + goto out; + } +--- a/drivers/scsi/ipr.c ++++ b/drivers/scsi/ipr.c +@@ -4009,10 +4009,8 @@ static ssize_t ipr_store_update_fw(struc + if (endline) + *endline = '\0'; + +- if (request_firmware(&fw_entry, fname, &ioa_cfg->pdev->dev)) { +- dev_err(&ioa_cfg->pdev->dev, "Firmware file %s not found\n", fname); ++ if (request_firmware(&fw_entry, fname, &ioa_cfg->pdev->dev)) + return -EIO; +- } + + image_hdr = (struct ipr_ucode_image_header *)fw_entry->data; + +--- a/drivers/scsi/pm8001/pm8001_ctl.c ++++ b/drivers/scsi/pm8001/pm8001_ctl.c +@@ -842,9 +842,6 @@ static ssize_t pm8001_store_update_fw(st + pm8001_ha->dev); + + if (ret) { +- pm8001_dbg(pm8001_ha, FAIL, +- "Failed to load firmware image file %s, error %d\n", +- filename_ptr, ret); + pm8001_ha->fw_status = FAIL_OPEN_BIOS_FILE; + goto out; + } +--- a/drivers/scsi/qla1280.c ++++ b/drivers/scsi/qla1280.c +@@ -1504,8 +1504,6 @@ qla1280_request_firmware(struct scsi_qla + err = request_firmware(&fw, fwname, &ha->pdev->dev); + + if (err) { +- printk(KERN_ERR "Failed to load image \"%s\" err %d\n", +- fwname, err); + fw = ERR_PTR(err); + goto unlock; + } +--- a/drivers/scsi/qla2xxx/qla_init.c ++++ b/drivers/scsi/qla2xxx/qla_init.c +@@ -8560,10 +8560,6 @@ qla2x00_load_risc(scsi_qla_host_t *vha, + /* Load firmware blob. */ + blob = qla2x00_request_firmware(vha); + if (!blob) { +- ql_log(ql_log_info, vha, 0x0083, +- "Firmware image unavailable.\n"); +- ql_log(ql_log_info, vha, 0x0084, +- "Firmware images can be retrieved from: "QLA_FW_URL ".\n"); + return QLA_FUNCTION_FAILED; + } + +@@ -8666,9 +8662,6 @@ qla24xx_load_risc_blob(scsi_qla_host_t * + + blob = qla2x00_request_firmware(vha); + if (!blob) { +- ql_log(ql_log_warn, vha, 0x0092, +- "-> Firmware file not found.\n"); +- + return QLA_FUNCTION_FAILED; + } + +--- a/drivers/scsi/qla2xxx/qla_nx.c ++++ b/drivers/scsi/qla2xxx/qla_nx.c +@@ -2427,11 +2427,8 @@ try_blob_fw: + + /* Load firmware blob. */ + blob = ha->hablob = qla2x00_request_firmware(vha); +- if (!blob) { +- ql_log(ql_log_fatal, vha, 0x00a3, +- "Firmware image not present.\n"); ++ if (!blob) + goto fw_load_failed; +- } + + /* Validating firmware blob */ + if (qla82xx_validate_firmware_blob(vha, +--- a/drivers/scsi/qla2xxx/qla_os.c ++++ b/drivers/scsi/qla2xxx/qla_os.c +@@ -7696,8 +7696,6 @@ qla2x00_request_firmware(scsi_qla_host_t + goto out; + + if (request_firmware(&blob->fw, blob->name, &ha->pdev->dev)) { +- ql_log(ql_log_warn, vha, 0x0063, +- "Failed to load firmware image (%s).\n", blob->name); + blob->fw = NULL; + blob = NULL; + } +--- a/drivers/scsi/qlogicpti.c ++++ b/drivers/scsi/qlogicpti.c +@@ -486,11 +486,8 @@ static int qlogicpti_load_firmware(struc + int i, timeout; + + err = request_firmware(&fw, fwname, &qpti->op->dev); +- if (err) { +- printk(KERN_ERR "Failed to load image \"%s\" err %d\n", +- fwname, err); ++ if (err) + return err; +- } + if (fw->size % 2) { + printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", + fw->size, fwname); +--- a/drivers/staging/rtl8192u/r819xU_firmware.c ++++ b/drivers/staging/rtl8192u/r819xU_firmware.c +@@ -240,10 +240,8 @@ bool init_firmware(struct net_device *de + */ + if (rst_opt == OPT_SYSTEM_RESET) { + rc = request_firmware(&fw_entry, fw_name[init_step], &priv->udev->dev); +- if (rc < 0) { +- RT_TRACE(COMP_ERR, "request firmware fail!\n"); ++ if (rc) + goto download_firmware_fail; +- } + + if (fw_entry->size > sizeof(pfirmware->firmware_buf)) { + RT_TRACE(COMP_ERR, "img file size exceed the container buffer fail!\n"); +--- a/drivers/staging/rtl8712/hal_init.c ++++ b/drivers/staging/rtl8712/hal_init.c +@@ -72,8 +72,6 @@ int rtl871x_load_fw(struct _adapter *pad + dev_info(dev, "r8712u: Loading firmware from \"%s\"\n", firmware_file); + rc = request_firmware_nowait(THIS_MODULE, 1, firmware_file, dev, + GFP_KERNEL, padapter, rtl871x_load_fw_cb); +- if (rc) +- dev_err(dev, "r8712u: Firmware request error %d\n", rc); + return rc; + } + MODULE_FIRMWARE("rtlwifi/rtl8712u.bin"); +--- a/drivers/staging/vt6656/main_usb.c ++++ b/drivers/staging/vt6656/main_usb.c +@@ -107,11 +107,8 @@ static int vnt_download_firmware(struct + dev_dbg(dev, "---->Download firmware\n"); + + ret = request_firmware(&fw, FIRMWARE_NAME, dev); +- if (ret) { +- dev_err(dev, "firmware file %s request failed (%d)\n", +- FIRMWARE_NAME, ret); ++ if (ret) + goto end; +- } + + for (ii = 0; ii < fw->size; ii += FIRMWARE_CHUNK_SIZE) { + length = min_t(int, fw->size - ii, FIRMWARE_CHUNK_SIZE); +--- a/drivers/tty/moxa.c ++++ b/drivers/tty/moxa.c +@@ -1154,13 +1154,8 @@ static int moxa_init_board(struct moxa_b + } + + ret = request_firmware(&fw, file, dev); +- if (ret) { +- printk(KERN_ERR "MOXA: request_firmware failed. Make sure " +- "you've placed '%s' file into your firmware " +- "loader directory (e.g. /lib/firmware)\n", +- file); ++ if (ret) + goto err_free; +- } + + ret = moxa_load_fw(brd, fw); + +--- a/drivers/tty/serial/icom.c ++++ b/drivers/tty/serial/icom.c +@@ -621,7 +621,6 @@ static void load_code(struct icom_port * + + /* Load Call Setup into Adapter */ + if (request_firmware(&fw, "icom_call_setup.bin", &dev->dev) < 0) { +- dev_err(&dev->dev,"Unable to load icom_call_setup.bin firmware image\n"); + status = -1; + goto load_code_exit; + } +@@ -641,7 +640,6 @@ static void load_code(struct icom_port * + + /* Load Resident DCE portion of Adapter */ + if (request_firmware(&fw, "icom_res_dce.bin", &dev->dev) < 0) { +- dev_err(&dev->dev,"Unable to load icom_res_dce.bin firmware image\n"); + status = -1; + goto load_code_exit; + } +@@ -686,7 +684,6 @@ static void load_code(struct icom_port * + } + + if (request_firmware(&fw, "icom_asc.bin", &dev->dev) < 0) { +- dev_err(&dev->dev,"Unable to load icom_asc.bin firmware image\n"); + status = -1; + goto load_code_exit; + } +--- a/drivers/tty/serial/ucc_uart.c ++++ b/drivers/tty/serial/ucc_uart.c +@@ -1149,10 +1149,8 @@ static void uart_firmware_cont(const str + struct device *dev = context; + int ret; + +- if (!fw) { +- dev_err(dev, "firmware not found\n"); ++ if (!fw) + return; +- } + + firmware = (struct qe_firmware *) fw->data; + +--- a/drivers/usb/atm/cxacru.c ++++ b/drivers/usb/atm/cxacru.c +@@ -1084,8 +1084,6 @@ static int cxacru_find_firmware(struct c + return -ENOENT; + } + +- usb_info(usbatm, "found firmware %s\n", buf); +- + return 0; + } + +--- a/drivers/usb/atm/ueagle-atm.c ++++ b/drivers/usb/atm/ueagle-atm.c +@@ -606,10 +606,8 @@ static void uea_upload_pre_firmware(cons + int ret, size; + + uea_enters(usb); +- if (!fw_entry) { +- uea_err(usb, "firmware is not available\n"); ++ if (!fw_entry) + goto err; +- } + + pfw = fw_entry->data; + size = fw_entry->size; +@@ -704,10 +702,6 @@ static int uea_load_firmware(struct usb_ + ret = request_firmware_nowait(THIS_MODULE, 1, fw_name, &usb->dev, + GFP_KERNEL, usb, + uea_upload_pre_firmware); +- if (ret) +- uea_err(usb, "firmware %s is not available\n", fw_name); +- else +- uea_info(usb, "loading firmware %s\n", fw_name); + + uea_leaves(usb); + return ret; +@@ -869,12 +863,8 @@ static int request_dsp(struct uea_softc + } + + ret = request_firmware(&sc->dsp_firm, dsp_name, &sc->usb_dev->dev); +- if (ret < 0) { +- uea_err(INS_TO_USBDEV(sc), +- "requesting firmware %s failed with error %d\n", +- dsp_name, ret); ++ if (ret) + return ret; +- } + + if (UEA_CHIP_VERSION(sc) == EAGLE_IV) + ret = check_dsp_e4(sc->dsp_firm->data, sc->dsp_firm->size); +@@ -1587,12 +1577,8 @@ static int request_cmvs_old(struct uea_s + + cmvs_file_name(sc, cmv_name, 1); + ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev); +- if (ret < 0) { +- uea_err(INS_TO_USBDEV(sc), +- "requesting firmware %s failed with error %d\n", +- cmv_name, ret); ++ if (ret) + return ret; +- } + + data = (u8 *) (*fw)->data; + size = (*fw)->size; +@@ -1629,9 +1615,6 @@ static int request_cmvs(struct uea_softc + "try to get older cmvs\n", cmv_name); + return request_cmvs_old(sc, cmvs, fw); + } +- uea_err(INS_TO_USBDEV(sc), +- "requesting firmware %s failed with error %d\n", +- cmv_name, ret); + return ret; + } + +@@ -1914,11 +1897,8 @@ static int load_XILINX_firmware(struct u + uea_enters(INS_TO_USBDEV(sc)); + + ret = request_firmware(&fw_entry, fw_name, &sc->usb_dev->dev); +- if (ret) { +- uea_err(INS_TO_USBDEV(sc), "firmware %s is not available\n", +- fw_name); ++ if (ret) + goto err0; +- } + + pfw = fw_entry->data; + size = fw_entry->size; +--- a/drivers/usb/misc/emi26.c ++++ b/drivers/usb/misc/emi26.c +@@ -85,21 +85,17 @@ static int emi26_load_firmware (struct u + + err = request_ihex_firmware(&loader_fw, "emi26/loader.fw", &dev->dev); + if (err) +- goto nofw; ++ goto wraperr; + + err = request_ihex_firmware(&bitstream_fw, "emi26/bitstream.fw", + &dev->dev); + if (err) +- goto nofw; ++ goto wraperr; + + err = request_ihex_firmware(&firmware_fw, "emi26/firmware.fw", + &dev->dev); +- if (err) { +- nofw: +- dev_err(&dev->dev, "%s - request_firmware() failed\n", +- __func__); ++ if (err) + goto wraperr; +- } + + /* Assert reset (stop the CPU in the EMI) */ + err = emi26_set_reset(dev,1); +--- a/drivers/usb/misc/ezusb.c ++++ b/drivers/usb/misc/ezusb.c +@@ -64,12 +64,8 @@ static int ezusb_ihex_firmware_download( + const struct ihex_binrec *record; + + if (request_ihex_firmware(&firmware, firmware_path, +- &dev->dev)) { +- dev_err(&dev->dev, +- "%s - request \"%s\" failed\n", +- __func__, firmware_path); ++ &dev->dev)) + goto out; +- } + + ret = ezusb_set_reset(dev, fx.cpucs_reg, 0); + if (ret < 0) +--- a/drivers/usb/misc/isight_firmware.c ++++ b/drivers/usb/misc/isight_firmware.c +@@ -45,7 +45,6 @@ static int isight_firmware_load(struct u + return -ENOMEM; + + if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) { +- printk(KERN_ERR "Unable to load isight firmware\n"); + ret = -ENODEV; + goto out; + } +--- a/drivers/usb/serial/io_edgeport.c ++++ b/drivers/usb/serial/io_edgeport.c +@@ -332,11 +332,8 @@ static void update_edgeport_E2PROM(struc + + response = request_ihex_firmware(&fw, fw_name, + &edge_serial->serial->dev->dev); +- if (response) { +- dev_err(dev, "Failed to load image \"%s\" err %d\n", +- fw_name, response); ++ if (response) + return; +- } + + rec = (const struct ihex_binrec *)fw->data; + BootMajorVersion = rec->data[0]; +--- a/drivers/usb/serial/io_ti.c ++++ b/drivers/usb/serial/io_ti.c +@@ -1009,8 +1009,6 @@ static int download_fw(struct edgeport_s + + status = request_firmware(&fw, fw_name, dev); + if (status) { +- dev_err(dev, "Failed to load image \"%s\" err %d\n", +- fw_name, status); + return status; + } + +--- a/drivers/usb/serial/ti_usb_3410_5052.c ++++ b/drivers/usb/serial/ti_usb_3410_5052.c +@@ -1635,10 +1635,8 @@ static int ti_download_firmware(struct t + } + + check_firmware: +- if (status) { +- dev_err(&dev->dev, "%s - firmware not found\n", __func__); ++ if (status) + return -ENOENT; +- } + if (fw_p->size > TI_FIRMWARE_BUF_SIZE) { + dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size); + release_firmware(fw_p); +--- a/drivers/video/fbdev/broadsheetfb.c ++++ b/drivers/video/fbdev/broadsheetfb.c +@@ -743,10 +743,8 @@ static ssize_t broadsheet_loadstore_wave + return -EINVAL; + + err = request_firmware(&fw_entry, "broadsheet.wbf", dev); +- if (err < 0) { +- dev_err(dev, "Failed to get broadsheet waveform\n"); ++ if (err) + goto err_failed; +- } + + /* try to enforce reasonable min max on waveform */ + if ((fw_entry->size < 8*1024) || (fw_entry->size > 64*1024)) { +--- a/drivers/video/fbdev/metronomefb.c ++++ b/drivers/video/fbdev/metronomefb.c +@@ -621,10 +621,8 @@ static int metronomefb_probe(struct plat + a) request the waveform file from userspace + b) process waveform and decode into metromem */ + retval = request_firmware(&fw_entry, "metronome.wbf", &dev->dev); +- if (retval < 0) { +- dev_err(&dev->dev, "Failed to get waveform\n"); ++ if (retval) + goto err_csum_table; +- } + + retval = load_waveform((u8 *) fw_entry->data, fw_entry->size, 3, 31, + par); +--- a/sound/drivers/vx/vx_hwdep.c ++++ b/sound/drivers/vx/vx_hwdep.c +@@ -58,10 +58,8 @@ int snd_vx_setup_firmware(struct vx_core + if (! fw_files[chip->type][i]) + continue; + sprintf(path, "vx/%s", fw_files[chip->type][i]); +- if (request_firmware(&fw, path, chip->dev)) { +- snd_printk(KERN_ERR "vx: can't load firmware %s\n", path); ++ if (request_firmware(&fw, path, chip->dev)) + return -ENOENT; +- } + err = chip->ops->load_dsp(chip, i, fw); + if (err < 0) { + release_firmware(fw); +--- a/sound/isa/msnd/msnd_pinnacle.c ++++ b/sound/isa/msnd/msnd_pinnacle.c +@@ -376,15 +376,11 @@ static int upload_dsp_code(struct snd_ca + outb(HPBLKSEL_0, chip->io + HP_BLKS); + + err = request_firmware(&init_fw, INITCODEFILE, card->dev); +- if (err < 0) { +- printk(KERN_ERR LOGNAME ": Error loading " INITCODEFILE); ++ if (err) + goto cleanup1; +- } + err = request_firmware(&perm_fw, PERMCODEFILE, card->dev); +- if (err < 0) { +- printk(KERN_ERR LOGNAME ": Error loading " PERMCODEFILE); ++ if (err) + goto cleanup; +- } + + memcpy_toio(chip->mappedbase, perm_fw->data, perm_fw->size); + if (snd_msnd_upload_host(chip, init_fw->data, init_fw->size) < 0) { +--- a/sound/isa/sscape.c ++++ b/sound/isa/sscape.c +@@ -520,10 +520,8 @@ static int sscape_upload_bootblock(struc + int ret; + + ret = request_firmware(&init_fw, "scope.cod", card->dev); +- if (ret < 0) { +- snd_printk(KERN_ERR "sscape: Error loading scope.cod"); ++ if (ret) + return ret; +- } + ret = upload_dma_data(sscape, init_fw->data, init_fw->size); + + release_firmware(init_fw); +@@ -560,11 +558,8 @@ static int sscape_upload_microcode(struc + scnprintf(name, sizeof(name), "sndscape.co%d", version); + + err = request_firmware(&init_fw, name, card->dev); +- if (err < 0) { +- snd_printk(KERN_ERR "sscape: Error loading sndscape.co%d", +- version); ++ if (err) + return err; +- } + err = upload_dma_data(sscape, init_fw->data, init_fw->size); + if (err == 0) + snd_printk(KERN_INFO "sscape: MIDI firmware loaded %zu KBs\n", +--- a/sound/isa/wavefront/wavefront_synth.c ++++ b/sound/isa/wavefront/wavefront_synth.c +@@ -1970,10 +1970,8 @@ wavefront_download_firmware (snd_wavefro + const struct firmware *firmware; + + err = request_firmware(&firmware, path, dev->card->dev); +- if (err < 0) { +- snd_printk(KERN_ERR "firmware (%s) download failed!!!\n", path); ++ if (err) + return 1; +- } + + len = 0; + buf = firmware->data; +--- a/sound/pci/asihpi/hpidspcd.c ++++ b/sound/pci/asihpi/hpidspcd.c +@@ -35,8 +35,6 @@ short hpi_dsp_code_open(u32 adapter, voi + err = request_firmware(&firmware, fw_name, &dev->dev); + + if (err || !firmware) { +- dev_err(&dev->dev, "%d, request_firmware failed for %s\n", +- err, fw_name); + goto error1; + } + if (firmware->size < sizeof(header)) { +--- a/sound/pci/cs46xx/cs46xx_lib.c ++++ b/sound/pci/cs46xx/cs46xx_lib.c +@@ -3196,11 +3196,8 @@ int snd_cs46xx_start_dsp(struct snd_cs46 + #ifdef CONFIG_SND_CS46XX_NEW_DSP + for (i = 0; i < CS46XX_DSP_MODULES; i++) { + err = load_firmware(chip, &chip->modules[i], module_names[i]); +- if (err < 0) { +- dev_err(chip->card->dev, "firmware load error [%s]\n", +- module_names[i]); ++ if (err < 0) + return err; +- } + err = cs46xx_dsp_load_module(chip, chip->modules[i]); + if (err < 0) { + dev_err(chip->card->dev, "image download error [%s]\n", +--- a/sound/pci/echoaudio/echoaudio.c ++++ b/sound/pci/echoaudio/echoaudio.c +@@ -48,11 +48,8 @@ static int get_firmware(const struct fir + "firmware requested: %s\n", card_fw[fw_index].data); + snprintf(name, sizeof(name), "ea/%s", card_fw[fw_index].data); + err = request_firmware(fw_entry, name, &chip->pci->dev); +- if (err < 0) +- dev_err(chip->card->dev, +- "get_firmware(): Firmware not available (%d)\n", err); + #ifdef CONFIG_PM_SLEEP +- else ++ if (!err) + chip->fw_cache[fw_index] = *fw_entry; + #endif + return err; +--- a/sound/pci/emu10k1/emu10k1_main.c ++++ b/sound/pci/emu10k1/emu10k1_main.c +@@ -864,10 +864,8 @@ static int snd_emu10k1_emu1010_init(stru + dev_info(emu->card->dev, "emu1010: EMU_HANA_ID = 0x%x\n", reg); + + err = snd_emu1010_load_firmware(emu, 0, &emu->firmware); +- if (err < 0) { +- dev_info(emu->card->dev, "emu1010: Loading Firmware failed\n"); ++ if (err < 0) + return err; +- } + + /* ID, should read & 0x7f = 0x55 when FPGA programmed. */ + snd_emu1010_fpga_read(emu, EMU_HANA_ID, ®); +--- a/sound/pci/hda/hda_intel.c ++++ b/sound/pci/hda/hda_intel.c +@@ -2040,8 +2040,6 @@ static void azx_firmware_cb(const struct + + if (fw) + chip->fw = fw; +- else +- dev_err(card->dev, "Cannot load firmware, continue without patching\n"); + if (!chip->disabled) { + /* continue probing */ + azx_probe_continue(chip); +--- a/sound/pci/korg1212/korg1212.c ++++ b/sound/pci/korg1212/korg1212.c +@@ -2232,7 +2232,6 @@ static int snd_korg1212_create(struct sn + + err = request_firmware(&dsp_code, "korg/k1212.dsp", &pci->dev); + if (err < 0) { +- snd_printk(KERN_ERR "firmware not available\n"); + return err; + } + +--- a/sound/pci/mixart/mixart_hwdep.c ++++ b/sound/pci/mixart/mixart_hwdep.c +@@ -566,11 +566,8 @@ int snd_mixart_setup_firmware(struct mix + + for (i = 0; i < 3; i++) { + sprintf(path, "mixart/%s", fw_files[i]); +- if (request_firmware(&fw_entry, path, &mgr->pci->dev)) { +- dev_err(&mgr->pci->dev, +- "miXart: can't load firmware %s\n", path); ++ if (request_firmware(&fw_entry, path, &mgr->pci->dev)) + return -ENOENT; +- } + /* fake hwdep dsp record */ + err = mixart_dsp_load(mgr, i, fw_entry); + release_firmware(fw_entry); +--- a/sound/pci/pcxhr/pcxhr_hwdep.c ++++ b/sound/pci/pcxhr/pcxhr_hwdep.c +@@ -375,12 +375,8 @@ int pcxhr_setup_firmware(struct pcxhr_mg + if (!fw_files[fw_set][i]) + continue; + sprintf(path, "pcxhr/%s", fw_files[fw_set][i]); +- if (request_firmware(&fw_entry, path, &mgr->pci->dev)) { +- dev_err(&mgr->pci->dev, +- "pcxhr: can't load firmware %s\n", +- path); ++ if (request_firmware(&fw_entry, path, &mgr->pci->dev)) + return -ENOENT; +- } + /* fake hwdep dsp record */ + err = pcxhr_dsp_load(mgr, i, fw_entry); + release_firmware(fw_entry); +--- a/sound/pci/riptide/riptide.c ++++ b/sound/pci/riptide/riptide.c +@@ -1222,11 +1222,8 @@ static int try_to_load_firmware(struct c + if (!chip->fw_entry) { + err = request_firmware(&chip->fw_entry, "riptide.hex", + &chip->pci->dev); +- if (err) { +- snd_printk(KERN_ERR +- "Riptide: Firmware not available %d\n", err); ++ if (err) + return -EIO; +- } + } + err = loadfirmware(cif, chip->fw_entry->data, chip->fw_entry->size); + if (err) { +--- a/sound/pci/rme9652/hdsp.c ++++ b/sound/pci/rme9652/hdsp.c +@@ -5171,11 +5171,8 @@ static int hdsp_request_fw_loader(struct + return -EINVAL; + } + +- if (request_firmware(&fw, fwfile, &hdsp->pci->dev)) { +- dev_err(hdsp->card->dev, +- "cannot load firmware %s\n", fwfile); ++ if (request_firmware(&fw, fwfile, &hdsp->pci->dev)) + return -ENOENT; +- } + if (fw->size < HDSP_FIRMWARE_SIZE) { + dev_err(hdsp->card->dev, + "too short firmware size %d (expected %d)\n", +--- a/sound/soc/codecs/wm2000.c ++++ b/sound/soc/codecs/wm2000.c +@@ -891,10 +891,8 @@ static int wm2000_i2c_probe(struct i2c_c + } + + ret = request_firmware(&fw, filename, &i2c->dev); +- if (ret != 0) { +- dev_err(&i2c->dev, "Failed to acquire ANC data: %d\n", ret); ++ if (ret != 0) + goto err_supplies; +- } + + /* Pre-cook the concatenation of the register address onto the image */ + wm2000->anc_download_size = fw->size + 2; +--- a/sound/usb/6fire/firmware.c ++++ b/sound/usb/6fire/firmware.c +@@ -203,8 +203,6 @@ static int usb6fire_fw_ezusb_upload( + ret = request_firmware(&fw, fwname, &device->dev); + if (ret < 0) { + kfree(rec); +- dev_err(&intf->dev, +- "error requesting ezusb firmware %s.\n", fwname); + return ret; + } + ret = usb6fire_fw_ihex_init(fw, rec); +@@ -280,8 +278,6 @@ static int usb6fire_fw_fpga_upload( + + ret = request_firmware(&fw, fwname, &device->dev); + if (ret < 0) { +- dev_err(&intf->dev, "unable to get fpga firmware %s.\n", +- fwname); + kfree(buffer); + return -EIO; + } diff --git a/debian/patches/bugfix/all/firmware_class-log-every-success-and-failure.patch b/debian/patches/bugfix/all/firmware_class-log-every-success-and-failure.patch new file mode 100644 index 0000000000..092a744961 --- /dev/null +++ b/debian/patches/bugfix/all/firmware_class-log-every-success-and-failure.patch @@ -0,0 +1,83 @@ +From: Ben Hutchings <ben@decadent.org.uk> +Subject: firmware_class: Log every success and failure against given device +Date: Sun, 09 Dec 2012 16:02:00 +0000 +Forwarded: no + +The hundreds of users of request_firmware() have nearly as many +different log formats for reporting failures. They also have only the +vaguest hint as to what went wrong; only firmware_class really knows +that. Therefore, add specific log messages for the failure modes that +aren't currently logged. + +In case of a driver that tries multiple names, this may result in the +impression that it failed to initialise. Therefore, also log successes. + +This makes many error messages in drivers redundant, which will be +removed in later patches. + +This does not cover the case where we fall back to a user-mode helper +(which is no longer enabled in Debian). + +NOTE: hw-detect will depend on the "firmware: failed to load %s (%d)\n" +format to detect missing firmware. +--- + drivers/base/firmware_loader/fallback.c | 2 +- + drivers/base/firmware_loader/main.c | 17 ++++++++--------- + 2 files changed, 9 insertions(+), 10 deletions(-) + +--- a/drivers/base/firmware_loader/fallback.c ++++ b/drivers/base/firmware_loader/fallback.c +@@ -558,7 +558,7 @@ static int fw_load_from_user_helper(stru + if (opt_flags & FW_OPT_NOWAIT) { + timeout = usermodehelper_read_lock_wait(timeout); + if (!timeout) { +- dev_dbg(device, "firmware: %s loading timed out\n", ++ dev_err(device, "firmware: %s loading timed out\n", + name); + return -EBUSY; + } +--- a/drivers/base/firmware_loader/main.c ++++ b/drivers/base/firmware_loader/main.c +@@ -535,18 +535,15 @@ fw_get_filesystem_firmware(struct device + file_size_ptr, + READING_FIRMWARE); + if (rc < 0) { +- if (rc != -ENOENT) +- dev_warn(device, "loading %s failed with error %d\n", +- path, rc); +- else +- dev_dbg(device, "loading %s failed for no such file or directory.\n", +- path); ++ dev_dbg(device, "loading %s failed with error %d\n", ++ path, rc); + continue; + } + size = rc; + rc = 0; + +- dev_dbg(device, "Loading firmware from %s\n", path); ++ dev_info(device, "firmware: direct-loading firmware %s\n", ++ fw_priv->fw_name); + if (decompress) { + dev_dbg(device, "f/w decompressing %s\n", + fw_priv->fw_name); +@@ -559,8 +556,6 @@ fw_get_filesystem_firmware(struct device + continue; + } + } else { +- dev_dbg(device, "direct-loading %s\n", +- fw_priv->fw_name); + if (!fw_priv->data) + fw_priv->data = buffer; + fw_priv->size = size; +@@ -570,6 +565,10 @@ fw_get_filesystem_firmware(struct device + } + __putname(path); + ++ if (rc) ++ dev_err(device, "firmware: failed to load %s (%d)\n", ++ fw_priv->fw_name, rc); ++ + return rc; + } + diff --git a/debian/patches/bugfix/all/fs-add-module_softdep-declarations-for-hard-coded-cr.patch b/debian/patches/bugfix/all/fs-add-module_softdep-declarations-for-hard-coded-cr.patch new file mode 100644 index 0000000000..91fd2fb9bd --- /dev/null +++ b/debian/patches/bugfix/all/fs-add-module_softdep-declarations-for-hard-coded-cr.patch @@ -0,0 +1,61 @@ +From: Ben Hutchings <ben@decadent.org.uk> +Date: Wed, 13 Apr 2016 21:48:06 +0100 +Subject: fs: Add MODULE_SOFTDEP declarations for hard-coded crypto drivers +Bug-Debian: https://bugs.debian.org/819725 +Forwarded: https://lore.kernel.org/all/20160517133631.GF7555@decadent.org.uk/ + +This helps initramfs builders and other tools to find the full +dependencies of a module. + +Signed-off-by: Ben Hutchings <ben@decadent.org.uk> +[Lukas Wunner: Forward-ported to 4.11: drop parts applied upstream] +--- + fs/btrfs/super.c | 2 +- + fs/ext4/super.c | 2 +- + fs/f2fs/super.c | 1 + + fs/jbd2/journal.c | 1 + + fs/nfsd/nfsctl.c | 3 +++ + 5 files changed, 7 insertions(+), 2 deletions(-) + +--- a/fs/btrfs/super.c ++++ b/fs/btrfs/super.c +@@ -2549,7 +2549,7 @@ + module_exit(exit_btrfs_fs) + + MODULE_LICENSE("GPL"); +-MODULE_SOFTDEP("pre: crc32c"); ++MODULE_SOFTDEP("pre: crypto-crc32c"); + MODULE_SOFTDEP("pre: xxhash64"); + MODULE_SOFTDEP("pre: sha256"); + MODULE_SOFTDEP("pre: blake2b-256"); +--- a/fs/ext4/super.c ++++ b/fs/ext4/super.c +@@ -7420,6 +7420,6 @@ + MODULE_AUTHOR("Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others"); + MODULE_DESCRIPTION("Fourth Extended Filesystem"); + MODULE_LICENSE("GPL"); +-MODULE_SOFTDEP("pre: crc32c"); ++MODULE_SOFTDEP("pre: crypto-crc32c"); + module_init(ext4_init_fs) + module_exit(ext4_exit_fs) +--- a/fs/jbd2/journal.c ++++ b/fs/jbd2/journal.c +@@ -3168,6 +3168,7 @@ + } + + MODULE_LICENSE("GPL"); ++MODULE_SOFTDEP("pre: crypto-crc32c"); + module_init(journal_init); + module_exit(journal_exit); + +--- a/fs/nfsd/nfsctl.c ++++ b/fs/nfsd/nfsctl.c +@@ -1629,5 +1629,8 @@ + MODULE_AUTHOR("Olaf Kirch <okir@monad.swb.de>"); + MODULE_DESCRIPTION("In-kernel NFS server"); + MODULE_LICENSE("GPL"); ++#ifdef CONFIG_NFSD_V4 ++MODULE_SOFTDEP("pre: crypto-md5"); ++#endif + module_init(init_nfsd) + module_exit(exit_nfsd) diff --git a/debian/patches/bugfix/all/kbuild-fix-recordmcount-dependency.patch b/debian/patches/bugfix/all/kbuild-fix-recordmcount-dependency.patch new file mode 100644 index 0000000000..8f9c21f56c --- /dev/null +++ b/debian/patches/bugfix/all/kbuild-fix-recordmcount-dependency.patch @@ -0,0 +1,23 @@ +From: Ben Hutchings <ben@decadent.org.uk> +Subject: kbuild: Fix recordmcount dependency for OOT modules +Date: Mon, 08 Sep 2014 18:31:24 +0100 +Forwarded: no + +We never rebuild anything in-tree when building an out-of-tree +modules, so external modules should not depend on the recordmcount +sources. + +--- a/scripts/Makefile.build ++++ b/scripts/Makefile.build +@@ -210,6 +210,11 @@ cmd_record_mcount = $(if $(findstring $( + $(sub_cmd_record_mcount)) + endif # CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT + ++# Don't require recordmcount source for an OOT build. ++ifdef KBUILD_EXTMOD ++recordmcount_source := ++endif ++ + # 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory + # 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file + # 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file diff --git a/debian/patches/bugfix/all/libapi-define-_fortify_source-as-2-not-empty.patch b/debian/patches/bugfix/all/libapi-define-_fortify_source-as-2-not-empty.patch new file mode 100644 index 0000000000..0412b83aa5 --- /dev/null +++ b/debian/patches/bugfix/all/libapi-define-_fortify_source-as-2-not-empty.patch @@ -0,0 +1,18 @@ +From: Ben Hutchings <benh@debian.org> +Date: Sat, 15 Jan 2022 22:30:49 +0100 +Subject: libapi: Define _FORTIFY_SOURCE as 2, not empty +Forwarded: https://lore.kernel.org/lkml/20230424102049.58338-1-ukleinek@debian.org/ + +Signed-off-by: Ben Hutchings <benh@debian.org> +--- +--- a/tools/lib/api/Makefile ++++ b/tools/lib/api/Makefile +@@ -29,7 +29,7 @@ endif + endif + + ifeq ($(DEBUG),0) +- CFLAGS += -D_FORTIFY_SOURCE ++ CFLAGS += -D_FORTIFY_SOURCE=2 + endif + + # Treat warnings as errors unless directed not to diff --git a/debian/patches/bugfix/all/module-disable-matching-missing-version-crc.patch b/debian/patches/bugfix/all/module-disable-matching-missing-version-crc.patch new file mode 100644 index 0000000000..8e0a7ee76d --- /dev/null +++ b/debian/patches/bugfix/all/module-disable-matching-missing-version-crc.patch @@ -0,0 +1,23 @@ +From: Ben Hutchings <ben@decadent.org.uk> +Date: Fri, 02 Dec 2016 23:06:18 +0000 +Subject: module: Disable matching missing version CRC +Forwarded: not-needed + +This partly reverts commit cd3caefb4663e3811d37cc2afad3cce642d60061. +We want to fail closed if a symbol version CRC is missing, as the +alternative may allow subverting module signing. +--- +--- a/kernel/module/version.c ++++ b/kernel/module/version.c +@@ -46,9 +46,8 @@ int check_version(const struct load_info + goto bad_version; + } + +- /* Broken toolchain. Warn once, then let it go.. */ +- pr_warn_once("%s: no symbol version for %s\n", info->name, symname); +- return 1; ++ pr_warn("%s: no symbol version for %s\n", info->name, symname); ++ return 0; + + bad_version: + pr_warn("%s: disagrees about version of symbol %s\n", info->name, symname); diff --git a/debian/patches/bugfix/all/perf-tools-support-extra-cxxflags.patch b/debian/patches/bugfix/all/perf-tools-support-extra-cxxflags.patch new file mode 100644 index 0000000000..a3169e3818 --- /dev/null +++ b/debian/patches/bugfix/all/perf-tools-support-extra-cxxflags.patch @@ -0,0 +1,30 @@ +From: Ben Hutchings <benh@debian.org> +Date: Mon, 15 May 2023 15:58:39 +0200 +Subject: perf tools: Support EXTRA_CXXFLAGS + +Add support for an EXTRA_CXXFLAGS variable, used similarly to +EXTRA_CFLAGS. + +Signed-off-by: Ben Hutchings <benh@debian.org> +--- +--- a/tools/perf/Makefile.config ++++ b/tools/perf/Makefile.config +@@ -18,6 +18,7 @@ detected_var = $(shell echo "$(1)=$($(1) + + CFLAGS := $(EXTRA_CFLAGS) $(filter-out -Wnested-externs,$(EXTRA_WARNINGS)) + HOSTCFLAGS := $(filter-out -Wnested-externs,$(EXTRA_WARNINGS)) ++CXXFLAGS := $(EXTRA_CXXFLAGS) + + # Enabled Wthread-safety analysis for clang builds. + ifeq ($(CC_NO_CLANG), 0) +--- a/tools/perf/Makefile.perf ++++ b/tools/perf/Makefile.perf +@@ -33,7 +33,7 @@ include ../scripts/utilities.mak + # + # Define LDFLAGS=-static to build a static binary. + # +-# Define EXTRA_CFLAGS=-m64 or EXTRA_CFLAGS=-m32 as appropriate for cross-builds. ++# Define EXTRA_CFLAGS=-m64 or EXTRA_CFLAGS=-m32 as appropriate for cross-builds, and similarly EXTRA_CXXFLAGS. + # + # Define EXCLUDE_EXTLIBS=-lmylib to exclude libmylib from the auto-generated + # EXTLIBS. diff --git a/debian/patches/bugfix/all/radeon-amdgpu-firmware-is-required-for-drm-and-kms-on-r600-onward.patch b/debian/patches/bugfix/all/radeon-amdgpu-firmware-is-required-for-drm-and-kms-on-r600-onward.patch new file mode 100644 index 0000000000..9f4d914fee --- /dev/null +++ b/debian/patches/bugfix/all/radeon-amdgpu-firmware-is-required-for-drm-and-kms-on-r600-onward.patch @@ -0,0 +1,88 @@ +From: Ben Hutchings <ben@decadent.org.uk> +Subject: radeon, amdgpu: Firmware is required for DRM and KMS on R600 onward +Date: Tue, 08 Jan 2013 03:25:52 +0000 +Bug-Debian: https://bugs.debian.org/607194 +Bug-Debian: https://bugs.debian.org/607471 +Bug-Debian: https://bugs.debian.org/610851 +Bug-Debian: https://bugs.debian.org/627497 +Bug-Debian: https://bugs.debian.org/632212 +Bug-Debian: https://bugs.debian.org/637943 +Bug-Debian: https://bugs.debian.org/649448 +Bug-Debian: https://bugs.debian.org/697229 +Bug-Debian: https://bugs.debian.org/1053764 +Forwarded: no +Last-Update: 2023-11-08 + +radeon requires firmware/microcode for the GPU in all chips, but for +newer chips (apparently R600 'Evergreen' onward) it also expects +firmware for the memory controller and other sub-blocks. + +radeon attempts to gracefully fall back and disable some features if +the firmware is not available, but becomes unstable - the framebuffer +and/or system memory may be corrupted, or the display may stay black. + +Therefore, perform a basic check for the existence of +/lib/firmware/radeon when a device is probed, and abort if it +is missing, except for the pre-R600 case. + +Update 2023-11-08: +In bug 1053764 Mario Limonciello <mario.limonciello@amd.com> states +that the patch isn't needed anymore for amdgpu, so remove that part +of the patch +--- + drivers/gpu/drm/radeon/radeon_drv.c | 30 +++++++++++++++++++++++++ + 1 files changed, 30 insertions(+) + +--- a/drivers/gpu/drm/radeon/radeon_drv.c ++++ b/drivers/gpu/drm/radeon/radeon_drv.c +@@ -32,6 +32,8 @@ + + #include <linux/compat.h> + #include <linux/module.h> ++#include <linux/namei.h> ++#include <linux/path.h> + #include <linux/pm_runtime.h> + #include <linux/vga_switcheroo.h> + #include <linux/mmu_notifier.h> +@@ -255,6 +257,28 @@ MODULE_DEVICE_TABLE(pci, pciidlist); + + static const struct drm_driver kms_driver; + ++/* Test that /lib/firmware/radeon is a directory (or symlink to a ++ * directory). We could try to match the udev search path, but let's ++ * keep it simple. ++ */ ++static bool radeon_firmware_installed(void) ++{ ++#if IS_BUILTIN(CONFIG_DRM_RADEON) ++ /* It may be too early to tell. Assume it's there. */ ++ return true; ++#else ++ struct path path; ++ ++ if (kern_path("/lib/firmware/radeon", LOOKUP_DIRECTORY | LOOKUP_FOLLOW, ++ &path) == 0) { ++ path_put(&path); ++ return true; ++ } ++ ++ return false; ++#endif ++} ++ + static int radeon_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) + { +@@ -295,6 +319,12 @@ static int radeon_pci_probe(struct pci_d + if (vga_switcheroo_client_probe_defer(pdev)) + return -EPROBE_DEFER; + ++ if ((ent->driver_data & RADEON_FAMILY_MASK) >= CHIP_R600 && ++ !radeon_firmware_installed()) { ++ DRM_ERROR("radeon kernel modesetting for R600 or later requires firmware installed\n"); ++ return -ENODEV; ++ } ++ + /* Get rid of things like offb */ + ret = drm_aperture_remove_conflicting_pci_framebuffers(pdev, &kms_driver); + if (ret) diff --git a/debian/patches/bugfix/all/tools-build-remove-bpf-run-time-check-at-build-time.patch b/debian/patches/bugfix/all/tools-build-remove-bpf-run-time-check-at-build-time.patch new file mode 100644 index 0000000000..3818dbb172 --- /dev/null +++ b/debian/patches/bugfix/all/tools-build-remove-bpf-run-time-check-at-build-time.patch @@ -0,0 +1,27 @@ +From: Ben Hutchings <ben@decadent.org.uk> +Date: Sun, 21 Feb 2016 15:33:15 +0000 +Subject: tools/build: Remove bpf() run-time check at build time +Forwarded: no + +It is not correct to test that a syscall works on the build system's +kernel. We might be building on an earlier kernel version or with +security restrictions that block bpf(). + +Signed-off-by: Ben Hutchings <ben@decadent.org.uk> +--- +--- a/tools/build/feature/test-bpf.c ++++ b/tools/build/feature/test-bpf.c +@@ -35,8 +35,10 @@ int main(void) + attr.prog_flags = 0; + + /* +- * Test existence of __NR_bpf and BPF_PROG_LOAD. +- * This call should fail if we run the testcase. ++ * bwh: Don't use the bpf() syscall as we might be building on a ++ * much older kernel. Do "use" the attr structure here to avoid ++ * a "set but not used" warning. + */ +- return syscall(__NR_bpf, BPF_PROG_LOAD, &attr, sizeof(attr)); ++ (void)&attr; ++ return 0; + } diff --git a/debian/patches/bugfix/all/tools-perf-fix-missing-ldflags-for-some-programs.patch b/debian/patches/bugfix/all/tools-perf-fix-missing-ldflags-for-some-programs.patch new file mode 100644 index 0000000000..2d8f29d25c --- /dev/null +++ b/debian/patches/bugfix/all/tools-perf-fix-missing-ldflags-for-some-programs.patch @@ -0,0 +1,17 @@ +From: Ben Hutchings <benh@debian.org> +Date: Sat, 15 Jan 2022 22:59:11 +0100 +Subject: tools/perf: Fix missing LDFLAGS for some programs + +Signed-off-by: Ben Hutchings <benh@debian.org> +--- +--- a/tools/perf/Makefile.perf ++++ b/tools/perf/Makefile.perf +@@ -785,7 +785,7 @@ $(OUTPUT)dlfilters/%.o: dlfilters/%.c in + .SECONDARY: $(DLFILTERS:.so=.o) + + $(OUTPUT)dlfilters/%.so: $(OUTPUT)dlfilters/%.o +- $(QUIET_LINK)$(CC) $(EXTRA_CFLAGS) -shared -o $@ $< ++ $(QUIET_LINK)$(CC) $(EXTRA_CFLAGS) $(LDFLAGS) -shared -o $@ $< + + ifndef NO_JVMTI + LIBJVMTI_IN := $(OUTPUT)jvmti/jvmti-in.o diff --git a/debian/patches/bugfix/all/tools-perf-man-date.patch b/debian/patches/bugfix/all/tools-perf-man-date.patch new file mode 100644 index 0000000000..1ba6488cad --- /dev/null +++ b/debian/patches/bugfix/all/tools-perf-man-date.patch @@ -0,0 +1,44 @@ +From: Ben Hutchings <ben@decadent.org.uk> +Date: Mon, 13 Jul 2015 20:29:20 +0100 +Subject: perf tools: Use $KBUILD_BUILD_TIMESTAMP as man page date +Forwarded: https://lore.kernel.org/all/20160517132809.GE7555@decadent.org.uk/ + +This allows man pages to be built reproducibly. + +Signed-off-by: Ben Hutchings <ben@decadent.org.uk> +--- + tools/perf/Documentation/Makefile | 3 +++ + tools/perf/Documentation/asciidoc.conf | 3 +++ + 2 files changed, 6 insertions(+) + +diff --git a/tools/perf/Documentation/Makefile b/tools/perf/Documentation/Makefile +index adc5a7e44b98..2161b2e838b7 100644 +--- a/tools/perf/Documentation/Makefile ++++ b/tools/perf/Documentation/Makefile +@@ -132,6 +132,9 @@ endif + ifdef DOCBOOK_SUPPRESS_SP + XMLTO_EXTRA += -m manpage-suppress-sp.xsl + endif ++ifdef KBUILD_BUILD_TIMESTAMP ++ASCIIDOC_EXTRA += -a revdate=$(shell date -u -d '$(KBUILD_BUILD_TIMESTAMP)' +%Y-%m-%d) ++endif + + SHELL_PATH ?= $(SHELL) + # Shell quote; +diff --git a/tools/perf/Documentation/asciidoc.conf b/tools/perf/Documentation/asciidoc.conf +index 2b62ba1e72b7..82d3060177ba 100644 +--- a/tools/perf/Documentation/asciidoc.conf ++++ b/tools/perf/Documentation/asciidoc.conf +@@ -71,6 +71,9 @@ ifdef::backend-docbook[] + [header] + template::[header-declarations] + <refentry> ++<refentryinfo> ++template::[docinfo] ++</refentryinfo> + ifdef::perf_date[] + <refentryinfo><date>{perf_date}</date></refentryinfo> + endif::perf_date[] +-- +2.23.0 + diff --git a/debian/patches/bugfix/all/tools-perf-remove-shebangs.patch b/debian/patches/bugfix/all/tools-perf-remove-shebangs.patch new file mode 100644 index 0000000000..9766e0e4a5 --- /dev/null +++ b/debian/patches/bugfix/all/tools-perf-remove-shebangs.patch @@ -0,0 +1,39 @@ +From: Ben Hutchings <ben@decadent.org.uk> +Date: Fri, 25 Sep 2015 20:09:23 +0100 +Subject: tools/perf: Remove shebang lines from perf scripts +Forwarded: no + +perf scripts need to be invoked through perf, not directly through +perl (or other language interpreter). So including shebang lines in +them is useless and possibly misleading. + +Signed-off-by: Ben Hutchings <ben@decadent.org.uk> +--- +--- a/tools/perf/scripts/perl/rw-by-file.pl ++++ b/tools/perf/scripts/perl/rw-by-file.pl +@@ -1,4 +1,3 @@ +-#!/usr/bin/perl -w + # SPDX-License-Identifier: GPL-2.0-only + # (c) 2009, Tom Zanussi <tzanussi@gmail.com> + +--- a/tools/perf/scripts/perl/rw-by-pid.pl ++++ b/tools/perf/scripts/perl/rw-by-pid.pl +@@ -1,4 +1,3 @@ +-#!/usr/bin/perl -w + # SPDX-License-Identifier: GPL-2.0-only + # (c) 2009, Tom Zanussi <tzanussi@gmail.com> + +--- a/tools/perf/scripts/perl/rwtop.pl ++++ b/tools/perf/scripts/perl/rwtop.pl +@@ -1,4 +1,3 @@ +-#!/usr/bin/perl -w + # SPDX-License-Identifier: GPL-2.0-only + # (c) 2010, Tom Zanussi <tzanussi@gmail.com> + +--- a/tools/perf/scripts/perl/wakeup-latency.pl ++++ b/tools/perf/scripts/perl/wakeup-latency.pl +@@ -1,4 +1,3 @@ +-#!/usr/bin/perl -w + # SPDX-License-Identifier: GPL-2.0-only + # (c) 2009, Tom Zanussi <tzanussi@gmail.com> + diff --git a/debian/patches/bugfix/all/tools_lib_symbol_use_d_fortify_source_2_for_non_debug_builds.patch b/debian/patches/bugfix/all/tools_lib_symbol_use_d_fortify_source_2_for_non_debug_builds.patch new file mode 100644 index 0000000000..9662520417 --- /dev/null +++ b/debian/patches/bugfix/all/tools_lib_symbol_use_d_fortify_source_2_for_non_debug_builds.patch @@ -0,0 +1,31 @@ +From: Uwe Kleine-König <ukleinek@debian.org> +Subject: tools lib symbol: Use -D_FORTIFY_SOURCE=2 for non-debug builds +Date: Mon, 24 Apr 2023 12:28:27 +0200 +Forwarded: https://lore.kernel.org/all/20230424102827.58707-1-ukleinek@debian.org/ + +Commit 160be157eaba ("tool lib symbol: Add Makefile/Build") failed to +define _FORTIFY_SOURCE to 2, probabaly this was cut&pasted from other +Makefiles with the same problem. + +Fixes: 160be157eaba ("tool lib symbol: Add Makefile/Build") +Signed-off-by: Uwe Kleine-König <ukleinek@debian.org> +Acked-by: Ian Rogers <irogers@google.com> +--- + tools/lib/symbol/Makefile | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/tools/lib/symbol/Makefile b/tools/lib/symbol/Makefile +index 13d43c6f92b4..4a08cc4e19f2 100644 +--- a/tools/lib/symbol/Makefile ++++ b/tools/lib/symbol/Makefile +@@ -39,7 +39,7 @@ endif + endif + + ifeq ($(DEBUG),0) +- CFLAGS += -D_FORTIFY_SOURCE ++ CFLAGS += -D_FORTIFY_SOURCE=2 + endif + + # Treat warnings as errors unless directed not to +-- +2.39.2 diff --git a/debian/patches/bugfix/all/usbip-document-tcp-wrappers.patch b/debian/patches/bugfix/all/usbip-document-tcp-wrappers.patch new file mode 100644 index 0000000000..d9d7b301dd --- /dev/null +++ b/debian/patches/bugfix/all/usbip-document-tcp-wrappers.patch @@ -0,0 +1,29 @@ +From: Ben Hutchings <ben@decadent.org.uk> +Date: Sun, 24 Jun 2012 02:51:39 +0100 +Subject: usbip: Document TCP wrappers +Forwarded: no + +Add references to TCP wrappers configuration in the manual page. + +--- a/tools/usb/usbip/doc/usbipd.8 ++++ b/tools/usb/usbip/doc/usbipd.8 +@@ -14,7 +14,8 @@ Devices have to explicitly be exported u + before usbipd makes them available to other hosts. + + The daemon accepts connections from USB/IP clients +-on TCP port 3240 by default. ++on TCP port 3240 by default. The clients authorised to connect may be ++configured as documented in hosts_access(5). + + .SH OPTIONS + .HP +@@ -69,7 +70,8 @@ Show version. + + .B usbipd + offers no authentication or authorization for USB/IP. Any +-USB/IP client can connect and use exported devices. ++USB/IP client running on an authorised host can connect and ++use exported devices. + + .SH EXAMPLES + diff --git a/debian/patches/bugfix/alpha/alpha-fix-missing-symbol-versions-for-str-n-cat-cpy.patch b/debian/patches/bugfix/alpha/alpha-fix-missing-symbol-versions-for-str-n-cat-cpy.patch new file mode 100644 index 0000000000..3da69882e8 --- /dev/null +++ b/debian/patches/bugfix/alpha/alpha-fix-missing-symbol-versions-for-str-n-cat-cpy.patch @@ -0,0 +1,75 @@ +From: Ben Hutchings <ben@decadent.org.uk> +Date: Thu, 5 Jan 2023 17:04:40 +0100 +Subject: alpha: Fix missing symbol versions for str{,n}{cat,cpy} +Origin: https://marc.info/?l=linux-alpha&m=167364720725291&w=2 + +Now that modpost extracts symbol versions from *.cmd files, it can't +find the versions for these 4 symbols. This is due to the way we link +their objects together ahead of the full vmlinux link. genksyms puts +their symbol CRCs in .str{,n}{cat,cpy}.o.cmd, but modpost only reads +the .sty{,n}cpy.o.cmd files. + +Add assembly sources that bring the appropriate routines together with +include directives instead of using the linker for this. + +Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> +Fixes: f292d875d0dc ("modpost: extract symbol versions from *.cmd files") +Signed-off-by: Ben Hutchings <ben@decadent.org.uk> +--- + arch/alpha/lib/Makefile | 14 -------------- + arch/alpha/lib/stycpy.S | 8 ++++++++ + arch/alpha/lib/styncpy.S | 8 ++++++++ + 3 files changed, 16 insertions(+), 14 deletions(-) + create mode 100644 arch/alpha/lib/stycpy.S + create mode 100644 arch/alpha/lib/styncpy.S + +diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile +index 1cc74f7b50ef..8f1c32a25a40 100644 +--- a/arch/alpha/lib/Makefile ++++ b/arch/alpha/lib/Makefile +@@ -45,17 +45,3 @@ AFLAGS___remlu.o = -DREM -DINTSIZE + $(addprefix $(obj)/,__divqu.o __remqu.o __divlu.o __remlu.o): \ + $(src)/$(ev6-y)divide.S FORCE + $(call if_changed_rule,as_o_S) +- +-# There are direct branches between {str*cpy,str*cat} and stx*cpy. +-# Ensure the branches are within range by merging these objects. +- +-LDFLAGS_stycpy.o := -r +-LDFLAGS_styncpy.o := -r +- +-$(obj)/stycpy.o: $(obj)/strcpy.o $(obj)/$(ev67-y)strcat.o \ +- $(obj)/$(ev6-y)stxcpy.o FORCE +- $(call if_changed,ld) +- +-$(obj)/styncpy.o: $(obj)/strncpy.o $(obj)/$(ev67-y)strncat.o \ +- $(obj)/$(ev6-y)stxncpy.o FORCE +- $(call if_changed,ld) +diff --git a/arch/alpha/lib/stycpy.S b/arch/alpha/lib/stycpy.S +new file mode 100644 +index 000000000000..b4376834c91f +--- /dev/null ++++ b/arch/alpha/lib/stycpy.S +@@ -0,0 +1,8 @@ ++#include "strcpy.S" ++#ifdef CONFIG_ALPHA_EV6 ++#include "ev6-strcat.S" ++#include "ev6-stxcpy.S" ++#else ++#include "strcat.S" ++#include "stxcpy.S" ++#endif +diff --git a/arch/alpha/lib/styncpy.S b/arch/alpha/lib/styncpy.S +new file mode 100644 +index 000000000000..c393f816ff98 +--- /dev/null ++++ b/arch/alpha/lib/styncpy.S +@@ -0,0 +1,8 @@ ++#include "strncpy.S" ++#ifdef CONFIG_ALPHA_EV6 ++#include "ev6-strncat.S" ++#include "ev6-stxncpy.S" ++#else ++#include "strncat.S" ++#include "stxncpy.S" ++#endif diff --git a/debian/patches/bugfix/arm/arm-dts-kirkwood-fix-sata-pinmux-ing-for-ts419.patch b/debian/patches/bugfix/arm/arm-dts-kirkwood-fix-sata-pinmux-ing-for-ts419.patch new file mode 100644 index 0000000000..52acb9fb56 --- /dev/null +++ b/debian/patches/bugfix/arm/arm-dts-kirkwood-fix-sata-pinmux-ing-for-ts419.patch @@ -0,0 +1,35 @@ +From: Ben Hutchings <ben@decadent.org.uk> +Date: Fri, 17 Feb 2017 01:30:30 +0000 +Subject: ARM: dts: kirkwood: Fix SATA pinmux-ing for TS419 +Forwarded: https://lore.kernel.org/all/20170218003251.GC4152@decadent.org.uk/ +Bug-Debian: https://bugs.debian.org/855017 + +The old board code for the TS419 assigns MPP pins 15 and 16 as SATA +activity signals (and none as SATA presence signals). Currently the +device tree assigns the SoC's default pinmux groups for SATA, which +conflict with the second Ethernet port. + +Reported-by: gmbh@gazeta.pl +Tested-by: gmbh@gazeta.pl +References: https://bugs.debian.org/855017 +Cc: stable@vger.kernel.org # 3.15+ +Fixes: 934b524b3f49 ("ARM: Kirkwood: Add DT description of QNAP 419") +Signed-off-by: Ben Hutchings <ben@decadent.org.uk> +--- + arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi ++++ b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi +@@ -69,3 +69,11 @@ + phy-handle = <ðphy1>; + }; + }; ++ ++&pmx_sata0 { ++ marvell,pins = "mpp15"; ++}; ++ ++&pmx_sata1 { ++ marvell,pins = "mpp16"; ++}; diff --git a/debian/patches/bugfix/arm/arm-mm-export-__sync_icache_dcache-for-xen-privcmd.patch b/debian/patches/bugfix/arm/arm-mm-export-__sync_icache_dcache-for-xen-privcmd.patch new file mode 100644 index 0000000000..cd5b36fa17 --- /dev/null +++ b/debian/patches/bugfix/arm/arm-mm-export-__sync_icache_dcache-for-xen-privcmd.patch @@ -0,0 +1,31 @@ +From: Ben Hutchings <ben@decadent.org.uk> +Date: Wed, 11 Jul 2018 23:40:55 +0100 +Subject: ARM: mm: Export __sync_icache_dcache() for xen-privcmd +Forwarded: https://lore.kernel.org/all/20180711225013.GF14131@decadent.org.uk/ + +The xen-privcmd driver, which can be modular, calls set_pte_at() +which in turn may call __sync_icache_dcache(). + +The call to __sync_icache_dcache() may be optimised out because it is +conditional on !pte_special(), and xen-privcmd calls pte_mkspecial(). +However, in a non-LPAE configuration there is no "special" bit and the +call is really unconditional. + +Fixes: 3ad0876554ca ("xen/privcmd: add IOCTL_PRIVCMD_MMAP_RESOURCE") +Signed-off-by: Ben Hutchings <ben@decadent.org.uk> +--- + arch/arm/mm/flush.c | 1 + + 1 file changed, 1 insertion(+) + +Index: debian-kernel/arch/arm/mm/flush.c +=================================================================== +--- debian-kernel.orig/arch/arm/mm/flush.c ++++ debian-kernel/arch/arm/mm/flush.c +@@ -292,6 +292,7 @@ void __sync_icache_dcache(pte_t pteval) + if (pte_exec(pteval)) + __flush_icache_all(); + } ++EXPORT_SYMBOL_GPL(__sync_icache_dcache); + #endif + + /* diff --git a/debian/patches/bugfix/arm64/arm64-acpi-Add-fixup-for-HPE-m400-quirks.patch b/debian/patches/bugfix/arm64/arm64-acpi-Add-fixup-for-HPE-m400-quirks.patch new file mode 100644 index 0000000000..7a866fdc35 --- /dev/null +++ b/debian/patches/bugfix/arm64/arm64-acpi-Add-fixup-for-HPE-m400-quirks.patch @@ -0,0 +1,92 @@ +From: Geoff Levand <geoff@infradead.org> +Date: Wed, 13 Jun 2018 10:56:08 -0700 +Subject: arm64/acpi: Add fixup for HPE m400 quirks +Forwarded: https://lore.kernel.org/all/51d3d738-cdf5-2992-bba5-c3e1f34096c2@infradead.org/ + +Adds a new ACPI init routine acpi_fixup_m400_quirks that adds +a work-around for HPE ProLiant m400 APEI firmware problems. + +The work-around disables APEI when CONFIG_ACPI_APEI is set and +m400 firmware is detected. Without this fixup m400 systems +experience errors like these on startup: + + [Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 2 + [Hardware Error]: event severity: fatal + [Hardware Error]: Error 0, type: fatal + [Hardware Error]: section_type: memory error + [Hardware Error]: error_status: 0x0000000000001300 + [Hardware Error]: error_type: 10, invalid address + Kernel panic - not syncing: Fatal hardware error! + +Signed-off-by: Geoff Levand <geoff@infradead.org> +[bwh: Adjust context to apply to Linux 4.19] +--- + arch/arm64/kernel/acpi.c | 40 ++++++++++++++++++++++++++++++++++++---- + 1 file changed, 36 insertions(+), 4 deletions(-) + +Index: linux/arch/arm64/kernel/acpi.c +=================================================================== +--- linux.orig/arch/arm64/kernel/acpi.c ++++ linux/arch/arm64/kernel/acpi.c +@@ -32,6 +32,8 @@ + #include <asm/daifflags.h> + #include <asm/smp_plat.h> + ++#include <acpi/apei.h> ++ + int acpi_noirq = 1; /* skip ACPI IRQ initialization */ + int acpi_disabled = 1; + EXPORT_SYMBOL(acpi_disabled); +@@ -178,6 +180,33 @@ out: + } + + /* ++ * acpi_fixup_m400_quirks - Work-around for HPE ProLiant m400 APEI firmware ++ * problems. ++ */ ++static void __init acpi_fixup_m400_quirks(void) ++{ ++ acpi_status status; ++ struct acpi_table_header *header; ++#if !defined(CONFIG_ACPI_APEI) ++ int hest_disable = HEST_DISABLED; ++#endif ++ ++ if (!IS_ENABLED(CONFIG_ACPI_APEI) || hest_disable != HEST_ENABLED) ++ return; ++ ++ status = acpi_get_table(ACPI_SIG_HEST, 0, &header); ++ ++ if (ACPI_SUCCESS(status) && !strncmp(header->oem_id, "HPE ", 6) && ++ !strncmp(header->oem_table_id, "ProLiant", 8) && ++ MIDR_IMPLEMENTOR(read_cpuid_id()) == ARM_CPU_IMP_APM) { ++ hest_disable = HEST_DISABLED; ++ pr_info("Disabled APEI for m400.\n"); ++ } ++ ++ acpi_put_table(header); ++} ++ ++/* + * acpi_boot_table_init() called from setup_arch(), always. + * 1. find RSDP and get its address, and then find XSDT + * 2. extract all tables and checksums them all +@@ -232,11 +261,14 @@ done: + if (acpi_disabled) { + if (earlycon_acpi_spcr_enable) + early_init_dt_scan_chosen_stdout(); +- } else { +- acpi_parse_spcr(earlycon_acpi_spcr_enable, true); +- if (IS_ENABLED(CONFIG_ACPI_BGRT)) +- acpi_table_parse(ACPI_SIG_BGRT, acpi_parse_bgrt); ++ return; + } ++ ++ acpi_parse_spcr(earlycon_acpi_spcr_enable, true); ++ if (IS_ENABLED(CONFIG_ACPI_BGRT)) ++ acpi_table_parse(ACPI_SIG_BGRT, acpi_parse_bgrt); ++ ++ acpi_fixup_m400_quirks(); + } + + static pgprot_t __acpi_get_writethrough_mem_attribute(void) diff --git a/debian/patches/bugfix/powerpc/fbdev-offb-Update-expected-device-name.patch b/debian/patches/bugfix/powerpc/fbdev-offb-Update-expected-device-name.patch new file mode 100644 index 0000000000..d090356914 --- /dev/null +++ b/debian/patches/bugfix/powerpc/fbdev-offb-Update-expected-device-name.patch @@ -0,0 +1,46 @@ +From: Cyril Brulebois <cyril@debamax.com> +Date: Wed, 12 Apr 2023 11:55:08 +0200 +Subject: fbdev/offb: Update expected device name +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +Origin: https://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev.git/commit?id=27c74ea74be805ccba1bc1a0a03cc79c51dca6ea + +Since commit 241d2fb56a18 ("of: Make OF framebuffer device names unique"), +as spotted by Frédéric Bonnard, the historical "of-display" device is +gone: the updated logic creates "of-display.0" instead, then as many +"of-display.N" as required. + +This means that offb no longer finds the expected device, which prevents +the Debian Installer from setting up its interface, at least on ppc64el. + +It might be better to iterate on all possible nodes, but updating the +hardcoded device from "of-display" to "of-display.0" is confirmed to fix +the Debian Installer at the very least. + +Link: https://bugzilla.kernel.org/show_bug.cgi?id=217328 +Link: https://bugs.debian.org/1033058 +Fixes: 241d2fb56a18 ("of: Make OF framebuffer device names unique") +Cc: stable@vger.kernel.org +Signed-off-by: Cyril Brulebois <cyril@debamax.com> +Signed-off-by: Helge Deller <deller@gmx.de> +--- + drivers/video/fbdev/offb.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/drivers/video/fbdev/offb.c b/drivers/video/fbdev/offb.c +index 0065a77b6dbc8..b5fdef2b74359 100644 +--- a/drivers/video/fbdev/offb.c ++++ b/drivers/video/fbdev/offb.c +@@ -696,7 +696,7 @@ MODULE_DEVICE_TABLE(of, offb_of_match_display); + + static struct platform_driver offb_driver_display = { + .driver = { +- .name = "of-display", ++ .name = "of-display.0", + .of_match_table = offb_of_match_display, + }, + .probe = offb_probe_display, +-- +2.30.2 + diff --git a/debian/patches/bugfix/powerpc/powerpc-boot-fix-missing-crc32poly.h-when-building-with-kernel_xz.patch b/debian/patches/bugfix/powerpc/powerpc-boot-fix-missing-crc32poly.h-when-building-with-kernel_xz.patch new file mode 100644 index 0000000000..a00a2a485c --- /dev/null +++ b/debian/patches/bugfix/powerpc/powerpc-boot-fix-missing-crc32poly.h-when-building-with-kernel_xz.patch @@ -0,0 +1,39 @@ +From: Krzysztof Kozlowski <krzk@kernel.org> +Date: Wed, 29 Aug 2018 09:32:23 +0200 +Subject: powerpc/boot: Fix missing crc32poly.h when building with KERNEL_XZ +Origin: https://patchwork.ozlabs.org/patch/963258/ + +After commit faa16bc404d7 ("lib: Use existing define with +polynomial") the lib/xz/xz_crc32.c includes a header from include/linux +directory thus any other user of this code should define proper include +path. + +This fixes the build error on powerpc with CONFIG_KERNEL_XZ: + + In file included from ../arch/powerpc/boot/../../../lib/decompress_unxz.c:233:0, + from ../arch/powerpc/boot/decompress.c:42: + ../arch/powerpc/boot/../../../lib/xz/xz_crc32.c:18:29: fatal error: linux/crc32poly.h: No such file or directory + +Reported-by: Michal Kubecek <mkubecek@suse.cz> +Fixes: faa16bc404d7 ("lib: Use existing define with polynomial") +Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> +Reported-by: kbuild test robot <lkp@intel.com> +Reported-by: Meelis Roos <mroos@linux.ee> +Tested-by: Michal Kubecek <mkubecek@suse.cz> +--- + arch/powerpc/boot/Makefile | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +Index: linux/arch/powerpc/boot/Makefile +=================================================================== +--- linux.orig/arch/powerpc/boot/Makefile ++++ linux/arch/powerpc/boot/Makefile +@@ -70,7 +70,7 @@ BOOTCFLAGS += -fno-stack-protector + endif + + BOOTCFLAGS += -include $(srctree)/include/linux/compiler_attributes.h +-BOOTCFLAGS += -I$(objtree)/$(obj) -I$(srctree)/$(obj) ++BOOTCFLAGS += -I$(objtree)/$(obj) -I$(srctree)/$(obj) -I$(srctree)/include + + DTC_FLAGS ?= -p 1024 + diff --git a/debian/patches/bugfix/sh/sh-boot-do-not-use-hyphen-in-exported-variable-name.patch b/debian/patches/bugfix/sh/sh-boot-do-not-use-hyphen-in-exported-variable-name.patch new file mode 100644 index 0000000000..31eb2eb5d2 --- /dev/null +++ b/debian/patches/bugfix/sh/sh-boot-do-not-use-hyphen-in-exported-variable-name.patch @@ -0,0 +1,95 @@ +From: Ben Hutchings <ben@decadent.org.uk> +Date: Mon, 07 Feb 2022 00:00:26 +0100 +Subject: sh: Do not use hyphen in exported variable names + +arch/sh/Makefile defines and exports ld-bfd to be used by +arch/sh/boot/Makefile and arch/sh/boot/compressed/Makefile. However +some shells, including dash, will not pass through environment +variables whose name includes a hyphen. Usually GNU make does not use +a shell to recurse, but if e.g. $(srctree) contains '~' it will use a +shell here. + +Rename the variable to ld_bfd. + +(Another instance of this problem was fixed upstream by commit +82977af93a0d "sh: rename suffix-y to suffix_y".) + +References: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=sh4&ver=4.13%7Erc5-1%7Eexp1&stamp=1502943967&raw=0 +Fixes: ef9b542fce00 ("sh: bzip2/lzma uImage support.") +Signed-off-by: Ben Hutchings <ben@decadent.org.uk> +--- + arch/sh/Makefile | 10 +++++----- + arch/sh/boot/compressed/Makefile | 4 ++-- + arch/sh/boot/romimage/Makefile | 4 ++-- + 3 files changed, 9 insertions(+), 9 deletions(-) + +Index: linux/arch/sh/Makefile +=================================================================== +--- linux.orig/arch/sh/Makefile ++++ linux/arch/sh/Makefile +@@ -102,16 +102,16 @@ UTS_MACHINE := sh + LDFLAGS_vmlinux += -e _stext + + ifdef CONFIG_CPU_LITTLE_ENDIAN +-ld-bfd := elf32-sh-linux +-LDFLAGS_vmlinux += --defsym jiffies=jiffies_64 --oformat $(ld-bfd) ++ld_bfd := elf32-sh-linux ++LDFLAGS_vmlinux += --defsym jiffies=jiffies_64 --oformat $(ld_bfd) + KBUILD_LDFLAGS += -EL + else +-ld-bfd := elf32-shbig-linux +-LDFLAGS_vmlinux += --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd) ++ld_bfd := elf32-shbig-linux ++LDFLAGS_vmlinux += --defsym jiffies=jiffies_64+4 --oformat $(ld_bfd) + KBUILD_LDFLAGS += -EB + endif + +-export ld-bfd ++export ld_bfd + + # Mach groups + machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se +Index: linux/arch/sh/boot/compressed/Makefile +=================================================================== +--- linux.orig/arch/sh/boot/compressed/Makefile ++++ linux/arch/sh/boot/compressed/Makefile +@@ -36,7 +36,7 @@ endif + + ccflags-remove-$(CONFIG_MCOUNT) += -pg + +-LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \ ++LDFLAGS_vmlinux := --oformat $(ld_bfd) -Ttext $(IMAGE_OFFSET) -e startup \ + -T $(obj)/../../kernel/vmlinux.lds + + KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING +@@ -60,7 +60,7 @@ $(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.b + + OBJCOPYFLAGS += -R .empty_zero_page + +-LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T ++LDFLAGS_piggy.o := -r --format binary --oformat $(ld_bfd) -T + + $(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE + $(call if_changed,ld) +Index: linux/arch/sh/boot/romimage/Makefile +=================================================================== +--- linux.orig/arch/sh/boot/romimage/Makefile ++++ linux/arch/sh/boot/romimage/Makefile +@@ -13,7 +13,7 @@ mmcif-obj-$(CONFIG_CPU_SUBTYPE_SH7724) : + load-$(CONFIG_ROMIMAGE_MMCIF) := $(mmcif-load-y) + obj-$(CONFIG_ROMIMAGE_MMCIF) := $(mmcif-obj-y) + +-LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(load-y) -e romstart \ ++LDFLAGS_vmlinux := --oformat $(ld_bfd) -Ttext $(load-y) -e romstart \ + -T $(obj)/../../kernel/vmlinux.lds + + $(obj)/vmlinux: $(obj)/head.o $(obj-y) $(obj)/piggy.o FORCE +@@ -24,7 +24,7 @@ OBJCOPYFLAGS += -j .empty_zero_page + $(obj)/zeropage.bin: vmlinux FORCE + $(call if_changed,objcopy) + +-LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T ++LDFLAGS_piggy.o := -r --format binary --oformat $(ld_bfd) -T + + $(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/zeropage.bin arch/sh/boot/zImage FORCE + $(call if_changed,ld) diff --git a/debian/patches/bugfix/x86/perf-tools-fix-unwind-build-on-i386.patch b/debian/patches/bugfix/x86/perf-tools-fix-unwind-build-on-i386.patch new file mode 100644 index 0000000000..f9baa7bd3c --- /dev/null +++ b/debian/patches/bugfix/x86/perf-tools-fix-unwind-build-on-i386.patch @@ -0,0 +1,35 @@ +From: Ben Hutchings <ben@decadent.org.uk> +Date: Sat, 22 Jul 2017 17:37:33 +0100 +Subject: perf tools: Fix unwind build on i386 +Forwarded: no + +EINVAL may not be defined when building unwind-libunwind.c with +REMOTE_UNWIND_LIBUNWIND, resulting in a compiler error in +LIBUNWIND__ARCH_REG_ID(). Its only caller, access_reg(), only checks +for a negative return value and doesn't care what it is. So change +-EINVAL to -1. + +Fixes: 52ffe0ff02fc ("Support x86(32-bit) cross platform callchain unwind.") +Signed-off-by: Ben Hutchings <ben@decadent.org.uk> +--- + +--- a/tools/perf/arch/x86/util/unwind-libunwind.c ++++ b/tools/perf/arch/x86/util/unwind-libunwind.c +@@ -66,7 +66,7 @@ int LIBUNWIND__ARCH_REG_ID(int regnum) + break; + default: + pr_err("unwind: invalid reg id %d\n", regnum); +- return -EINVAL; ++ return -1; + } + + return id; +@@ -106,7 +106,7 @@ int LIBUNWIND__ARCH_REG_ID(int regnum) + break; + default: + pr_err("unwind: invalid reg id %d\n", regnum); +- return -EINVAL; ++ return -1; + } + + return id; diff --git a/debian/patches/bugfix/x86/revert-perf-build-fix-libunwind-feature-detection-on.patch b/debian/patches/bugfix/x86/revert-perf-build-fix-libunwind-feature-detection-on.patch new file mode 100644 index 0000000000..cfbf98e824 --- /dev/null +++ b/debian/patches/bugfix/x86/revert-perf-build-fix-libunwind-feature-detection-on.patch @@ -0,0 +1,22 @@ +From: Ben Hutchings <ben@decadent.org.uk> +Date: Fri, 25 Sep 2015 22:50:50 +0100 +Subject: Revert "perf build: Fix libunwind feature detection on 32-bit x86" +Forwarded: no + +This reverts commit 05b41775e2edd69a83f592e3534930c934d4038e. +It broke feature detection that was working just fine for us. +--- + tools/perf/Makefile.config | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/tools/perf/Makefile.config ++++ b/tools/perf/Makefile.config +@@ -38,7 +38,7 @@ ifeq ($(SRCARCH),x86) + LIBUNWIND_LIBS = -lunwind-x86_64 -lunwind -llzma + $(call detected,CONFIG_X86_64) + else +- LIBUNWIND_LIBS = -lunwind-x86 -llzma -lunwind ++ LIBUNWIND_LIBS = -lunwind -lunwind-x86 + endif + NO_PERF_REGS := 0 + endif diff --git a/debian/patches/bugfix/x86/viafb-autoload-on-olpc-xo1.5-only.patch b/debian/patches/bugfix/x86/viafb-autoload-on-olpc-xo1.5-only.patch new file mode 100644 index 0000000000..62b4eb7dec --- /dev/null +++ b/debian/patches/bugfix/x86/viafb-autoload-on-olpc-xo1.5-only.patch @@ -0,0 +1,34 @@ +From: Ben Hutchings <ben@decadent.org.uk> +Date: Sat, 20 Apr 2013 15:52:02 +0100 +Subject: viafb: Autoload on OLPC XO 1.5 only +Bug-Debian: https://bugs.debian.org/705788 +Forwarded: no + +It appears that viafb won't work automatically on all the boards for +which it has a PCI device ID match. Currently, it is blacklisted by +udev along with most other framebuffer drivers, so this doesn't matter +much. + +However, this driver is required for console support on the XO 1.5. +We need to allow it to be autoloaded on this model only, and then +un-blacklist it in udev. + +--- +--- a/drivers/video/fbdev/via/via-core.c ++++ b/drivers/video/fbdev/via/via-core.c +@@ -695,7 +695,14 @@ static const struct pci_device_id via_pc + .driver_data = UNICHROME_VX900 }, + { } + }; +-MODULE_DEVICE_TABLE(pci, via_pci_table); ++ ++static const struct pci_device_id via_pci_autoload_table[] __initconst = { ++ /* OLPC XO 1.5 */ ++ { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX855_DID), ++ .subvendor = 0x152d, .subdevice = 0x0833 }, ++ { } ++}; ++MODULE_DEVICE_TABLE(pci, via_pci_autoload_table); + + static const struct dev_pm_ops via_pm_ops = { + #ifdef CONFIG_PM_SLEEP |