diff options
Diffstat (limited to 'drivers/acpi/acpica/evxfgpe.c')
| -rw-r--r-- | drivers/acpi/acpica/evxfgpe.c | 1049 |
1 files changed, 1049 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c new file mode 100644 index 0000000000..4eeeb3b7ab --- /dev/null +++ b/drivers/acpi/acpica/evxfgpe.c @@ -0,0 +1,1049 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 +/****************************************************************************** + * + * Module Name: evxfgpe - External Interfaces for General Purpose Events (GPEs) + * + * Copyright (C) 2000 - 2023, Intel Corp. + * + *****************************************************************************/ + +#define EXPORT_ACPI_INTERFACES + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acevents.h" +#include "acnamesp.h" + +#define _COMPONENT ACPI_EVENTS +ACPI_MODULE_NAME("evxfgpe") + +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ +/******************************************************************************* + * + * FUNCTION: acpi_update_all_gpes + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Complete GPE initialization and enable all GPEs that have + * associated _Lxx or _Exx methods and are not pointed to by any + * device _PRW methods (this indicates that these GPEs are + * generally intended for system or device wakeup. Such GPEs + * have to be enabled directly when the devices whose _PRW + * methods point to them are set up for wakeup signaling.) + * + * NOTE: Should be called after any GPEs are added to the system. Primarily, + * after the system _PRW methods have been run, but also after a GPE Block + * Device has been added or if any new GPE methods have been added via a + * dynamic table load. + * + ******************************************************************************/ + +acpi_status acpi_update_all_gpes(void) +{ + acpi_status status; + u8 is_polling_needed = FALSE; + + ACPI_FUNCTION_TRACE(acpi_update_all_gpes); + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + if (acpi_gbl_all_gpes_initialized) { + goto unlock_and_exit; + } + + status = acpi_ev_walk_gpe_list(acpi_ev_initialize_gpe_block, + &is_polling_needed); + if (ACPI_SUCCESS(status)) { + acpi_gbl_all_gpes_initialized = TRUE; + } + +unlock_and_exit: + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + + if (is_polling_needed && acpi_gbl_all_gpes_initialized) { + + /* Poll GPEs to handle already triggered events */ + + acpi_ev_gpe_detect(acpi_gbl_gpe_xrupt_list_head); + } + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_update_all_gpes) + +/******************************************************************************* + * + * FUNCTION: acpi_enable_gpe + * + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 + * gpe_number - GPE level within the GPE block + * + * RETURN: Status + * + * DESCRIPTION: Add a reference to a GPE. On the first reference, the GPE is + * hardware-enabled. + * + ******************************************************************************/ +acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number) +{ + acpi_status status = AE_BAD_PARAMETER; + struct acpi_gpe_event_info *gpe_event_info; + acpi_cpu_flags flags; + + ACPI_FUNCTION_TRACE(acpi_enable_gpe); + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + /* + * Ensure that we have a valid GPE number and that there is some way + * of handling the GPE (handler or a GPE method). In other words, we + * won't allow a valid GPE to be enabled if there is no way to handle it. + */ + gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); + if (gpe_event_info) { + if (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) != + ACPI_GPE_DISPATCH_NONE) { + status = acpi_ev_add_gpe_reference(gpe_event_info, TRUE); + if (ACPI_SUCCESS(status) && + ACPI_GPE_IS_POLLING_NEEDED(gpe_event_info)) { + + /* Poll edge-triggered GPEs to handle existing events */ + + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + (void)acpi_ev_detect_gpe(gpe_device, + gpe_event_info, + gpe_number); + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + } + } else { + status = AE_NO_HANDLER; + } + } + + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + return_ACPI_STATUS(status); +} +ACPI_EXPORT_SYMBOL(acpi_enable_gpe) + +/******************************************************************************* + * + * FUNCTION: acpi_disable_gpe + * + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 + * gpe_number - GPE level within the GPE block + * + * RETURN: Status + * + * DESCRIPTION: Remove a reference to a GPE. When the last reference is + * removed, only then is the GPE disabled (for runtime GPEs), or + * the GPE mask bit disabled (for wake GPEs) + * + ******************************************************************************/ + +acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number) +{ + acpi_status status = AE_BAD_PARAMETER; + struct acpi_gpe_event_info *gpe_event_info; + acpi_cpu_flags flags; + + ACPI_FUNCTION_TRACE(acpi_disable_gpe); + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + /* Ensure that we have a valid GPE number */ + + gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); + if (gpe_event_info) { + status = acpi_ev_remove_gpe_reference(gpe_event_info) ; + } + + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_disable_gpe) + +/******************************************************************************* + * + * FUNCTION: acpi_set_gpe + * + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 + * gpe_number - GPE level within the GPE block + * action - ACPI_GPE_ENABLE or ACPI_GPE_DISABLE + * + * RETURN: Status + * + * DESCRIPTION: Enable or disable an individual GPE. This function bypasses + * the reference count mechanism used in the acpi_enable_gpe(), + * acpi_disable_gpe() interfaces. + * This API is typically used by the GPE raw handler mode driver + * to switch between the polling mode and the interrupt mode after + * the driver has enabled the GPE. + * The APIs should be invoked in this order: + * acpi_enable_gpe() <- Ensure the reference count > 0 + * acpi_set_gpe(ACPI_GPE_DISABLE) <- Enter polling mode + * acpi_set_gpe(ACPI_GPE_ENABLE) <- Leave polling mode + * acpi_disable_gpe() <- Decrease the reference count + * + * Note: If a GPE is shared by 2 silicon components, then both the drivers + * should support GPE polling mode or disabling the GPE for long period + * for one driver may break the other. So use it with care since all + * firmware _Lxx/_Exx handlers currently rely on the GPE interrupt mode. + * + ******************************************************************************/ +acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action) +{ + struct acpi_gpe_event_info *gpe_event_info; + acpi_status status; + acpi_cpu_flags flags; + + ACPI_FUNCTION_TRACE(acpi_set_gpe); + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + /* Ensure that we have a valid GPE number */ + + gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); + if (!gpe_event_info) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } + + /* Perform the action */ + + switch (action) { + case ACPI_GPE_ENABLE: + + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE); + gpe_event_info->disable_for_dispatch = FALSE; + break; + + case ACPI_GPE_DISABLE: + + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE); + gpe_event_info->disable_for_dispatch = TRUE; + break; + + default: + + status = AE_BAD_PARAMETER; + break; + } + +unlock_and_exit: + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_set_gpe) + +/******************************************************************************* + * + * FUNCTION: acpi_mask_gpe + * + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 + * gpe_number - GPE level within the GPE block + * is_masked - Whether the GPE is masked or not + * + * RETURN: Status + * + * DESCRIPTION: Unconditionally mask/unmask the an individual GPE, ex., to + * prevent a GPE flooding. + * + ******************************************************************************/ +acpi_status acpi_mask_gpe(acpi_handle gpe_device, u32 gpe_number, u8 is_masked) +{ + struct acpi_gpe_event_info *gpe_event_info; + acpi_status status; + acpi_cpu_flags flags; + + ACPI_FUNCTION_TRACE(acpi_mask_gpe); + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + /* Ensure that we have a valid GPE number */ + + gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); + if (!gpe_event_info) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } + + status = acpi_ev_mask_gpe(gpe_event_info, is_masked); + +unlock_and_exit: + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_mask_gpe) + +/******************************************************************************* + * + * FUNCTION: acpi_mark_gpe_for_wake + * + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 + * gpe_number - GPE level within the GPE block + * + * RETURN: Status + * + * DESCRIPTION: Mark a GPE as having the ability to wake the system. Simply + * sets the ACPI_GPE_CAN_WAKE flag. + * + * Some potential callers of acpi_setup_gpe_for_wake may know in advance that + * there won't be any notify handlers installed for device wake notifications + * from the given GPE (one example is a button GPE in Linux). For these cases, + * acpi_mark_gpe_for_wake should be used instead of acpi_setup_gpe_for_wake. + * This will set the ACPI_GPE_CAN_WAKE flag for the GPE without trying to + * setup implicit wake notification for it (since there's no handler method). + * + ******************************************************************************/ +acpi_status acpi_mark_gpe_for_wake(acpi_handle gpe_device, u32 gpe_number) +{ + struct acpi_gpe_event_info *gpe_event_info; + acpi_status status = AE_BAD_PARAMETER; + acpi_cpu_flags flags; + + ACPI_FUNCTION_TRACE(acpi_mark_gpe_for_wake); + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + /* Ensure that we have a valid GPE number */ + + gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); + if (gpe_event_info) { + + /* Mark the GPE as a possible wake event */ + + gpe_event_info->flags |= ACPI_GPE_CAN_WAKE; + status = AE_OK; + } + + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_mark_gpe_for_wake) + +/******************************************************************************* + * + * FUNCTION: acpi_setup_gpe_for_wake + * + * PARAMETERS: wake_device - Device associated with the GPE (via _PRW) + * gpe_device - Parent GPE Device. NULL for GPE0/GPE1 + * gpe_number - GPE level within the GPE block + * + * RETURN: Status + * + * DESCRIPTION: Mark a GPE as having the ability to wake the system. This + * interface is intended to be used as the host executes the + * _PRW methods (Power Resources for Wake) in the system tables. + * Each _PRW appears under a Device Object (The wake_device), and + * contains the info for the wake GPE associated with the + * wake_device. + * + ******************************************************************************/ +acpi_status +acpi_setup_gpe_for_wake(acpi_handle wake_device, + acpi_handle gpe_device, u32 gpe_number) +{ + acpi_status status; + struct acpi_gpe_event_info *gpe_event_info; + struct acpi_namespace_node *device_node; + struct acpi_gpe_notify_info *notify; + struct acpi_gpe_notify_info *new_notify; + acpi_cpu_flags flags; + + ACPI_FUNCTION_TRACE(acpi_setup_gpe_for_wake); + + /* Parameter Validation */ + + if (!wake_device) { + /* + * By forcing wake_device to be valid, we automatically enable the + * implicit notify feature on all hosts. + */ + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + /* Handle root object case */ + + if (wake_device == ACPI_ROOT_OBJECT) { + device_node = acpi_gbl_root_node; + } else { + device_node = + ACPI_CAST_PTR(struct acpi_namespace_node, wake_device); + } + + /* Validate wake_device is of type Device */ + + if (device_node->type != ACPI_TYPE_DEVICE) { + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + + /* + * Allocate a new notify object up front, in case it is needed. + * Memory allocation while holding a spinlock is a big no-no + * on some hosts. + */ + new_notify = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_notify_info)); + if (!new_notify) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + /* Ensure that we have a valid GPE number */ + + gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); + if (!gpe_event_info) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } + + /* + * If there is no method or handler for this GPE, then the + * wake_device will be notified whenever this GPE fires. This is + * known as an "implicit notify". Note: The GPE is assumed to be + * level-triggered (for windows compatibility). + */ + if (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) == + ACPI_GPE_DISPATCH_NONE) { + /* + * This is the first device for implicit notify on this GPE. + * Just set the flags here, and enter the NOTIFY block below. + */ + gpe_event_info->flags = + (ACPI_GPE_DISPATCH_NOTIFY | ACPI_GPE_LEVEL_TRIGGERED); + } else if (gpe_event_info->flags & ACPI_GPE_AUTO_ENABLED) { + /* + * A reference to this GPE has been added during the GPE block + * initialization, so drop it now to prevent the GPE from being + * permanently enabled and clear its ACPI_GPE_AUTO_ENABLED flag. + */ + (void)acpi_ev_remove_gpe_reference(gpe_event_info); + gpe_event_info->flags &= ~ACPI_GPE_AUTO_ENABLED; + } + + /* + * If we already have an implicit notify on this GPE, add + * this device to the notify list. + */ + if (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) == + ACPI_GPE_DISPATCH_NOTIFY) { + + /* Ensure that the device is not already in the list */ + + notify = gpe_event_info->dispatch.notify_list; + while (notify) { + if (notify->device_node == device_node) { + status = AE_ALREADY_EXISTS; + goto unlock_and_exit; + } + notify = notify->next; + } + + /* Add this device to the notify list for this GPE */ + + new_notify->device_node = device_node; + new_notify->next = gpe_event_info->dispatch.notify_list; + gpe_event_info->dispatch.notify_list = new_notify; + new_notify = NULL; + } + + /* Mark the GPE as a possible wake event */ + + gpe_event_info->flags |= ACPI_GPE_CAN_WAKE; + status = AE_OK; + +unlock_and_exit: + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + + /* Delete the notify object if it was not used above */ + + if (new_notify) { + ACPI_FREE(new_notify); + } + return_ACPI_STATUS(status); +} +ACPI_EXPORT_SYMBOL(acpi_setup_gpe_for_wake) + +/******************************************************************************* + * + * FUNCTION: acpi_set_gpe_wake_mask + * + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 + * gpe_number - GPE level within the GPE block + * action - Enable or Disable + * + * RETURN: Status + * + * DESCRIPTION: Set or clear the GPE's wakeup enable mask bit. The GPE must + * already be marked as a WAKE GPE. + * + ******************************************************************************/ + +acpi_status +acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action) +{ + acpi_status status = AE_OK; + struct acpi_gpe_event_info *gpe_event_info; + struct acpi_gpe_register_info *gpe_register_info; + acpi_cpu_flags flags; + u32 register_bit; + + ACPI_FUNCTION_TRACE(acpi_set_gpe_wake_mask); + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + /* + * Ensure that we have a valid GPE number and that this GPE is in + * fact a wake GPE + */ + gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); + if (!gpe_event_info) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } + + if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) { + status = AE_TYPE; + goto unlock_and_exit; + } + + gpe_register_info = gpe_event_info->register_info; + if (!gpe_register_info) { + status = AE_NOT_EXIST; + goto unlock_and_exit; + } + + register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info); + + /* Perform the action */ + + switch (action) { + case ACPI_GPE_ENABLE: + + ACPI_SET_BIT(gpe_register_info->enable_for_wake, + (u8)register_bit); + break; + + case ACPI_GPE_DISABLE: + + ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake, + (u8)register_bit); + break; + + default: + + ACPI_ERROR((AE_INFO, "%u, Invalid action", action)); + status = AE_BAD_PARAMETER; + break; + } + +unlock_and_exit: + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_set_gpe_wake_mask) + +/******************************************************************************* + * + * FUNCTION: acpi_clear_gpe + * + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 + * gpe_number - GPE level within the GPE block + * + * RETURN: Status + * + * DESCRIPTION: Clear an ACPI event (general purpose) + * + ******************************************************************************/ +acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number) +{ + acpi_status status = AE_OK; + struct acpi_gpe_event_info *gpe_event_info; + acpi_cpu_flags flags; + + ACPI_FUNCTION_TRACE(acpi_clear_gpe); + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + /* Ensure that we have a valid GPE number */ + + gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); + if (!gpe_event_info) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } + + status = acpi_hw_clear_gpe(gpe_event_info); + + unlock_and_exit: + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_clear_gpe) + +/******************************************************************************* + * + * FUNCTION: acpi_get_gpe_status + * + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 + * gpe_number - GPE level within the GPE block + * event_status - Where the current status of the event + * will be returned + * + * RETURN: Status + * + * DESCRIPTION: Get the current status of a GPE (signalled/not_signalled) + * + ******************************************************************************/ +acpi_status +acpi_get_gpe_status(acpi_handle gpe_device, + u32 gpe_number, acpi_event_status *event_status) +{ + acpi_status status = AE_OK; + struct acpi_gpe_event_info *gpe_event_info; + acpi_cpu_flags flags; + + ACPI_FUNCTION_TRACE(acpi_get_gpe_status); + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + /* Ensure that we have a valid GPE number */ + + gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); + if (!gpe_event_info) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } + + /* Obtain status on the requested GPE number */ + + status = acpi_hw_get_gpe_status(gpe_event_info, event_status); + +unlock_and_exit: + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_get_gpe_status) + +/******************************************************************************* + * + * FUNCTION: acpi_gispatch_gpe + * + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 + * gpe_number - GPE level within the GPE block + * + * RETURN: INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED + * + * DESCRIPTION: Detect and dispatch a General Purpose Event to either a function + * (e.g. EC) or method (e.g. _Lxx/_Exx) handler. + * + ******************************************************************************/ +u32 acpi_dispatch_gpe(acpi_handle gpe_device, u32 gpe_number) +{ + ACPI_FUNCTION_TRACE(acpi_dispatch_gpe); + + return acpi_ev_detect_gpe(gpe_device, NULL, gpe_number); +} + +ACPI_EXPORT_SYMBOL(acpi_dispatch_gpe) + +/******************************************************************************* + * + * FUNCTION: acpi_finish_gpe + * + * PARAMETERS: gpe_device - Namespace node for the GPE Block + * (NULL for FADT defined GPEs) + * gpe_number - GPE level within the GPE block + * + * RETURN: Status + * + * DESCRIPTION: Clear and conditionally re-enable a GPE. This completes the GPE + * processing. Intended for use by asynchronous host-installed + * GPE handlers. The GPE is only re-enabled if the enable_for_run bit + * is set in the GPE info. + * + ******************************************************************************/ +acpi_status acpi_finish_gpe(acpi_handle gpe_device, u32 gpe_number) +{ + struct acpi_gpe_event_info *gpe_event_info; + acpi_status status; + acpi_cpu_flags flags; + + ACPI_FUNCTION_TRACE(acpi_finish_gpe); + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + /* Ensure that we have a valid GPE number */ + + gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); + if (!gpe_event_info) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } + + status = acpi_ev_finish_gpe(gpe_event_info); + +unlock_and_exit: + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_finish_gpe) + +/****************************************************************************** + * + * FUNCTION: acpi_disable_all_gpes + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Disable and clear all GPEs in all GPE blocks + * + ******************************************************************************/ + +acpi_status acpi_disable_all_gpes(void) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_disable_all_gpes); + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + status = acpi_hw_disable_all_gpes(); + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_disable_all_gpes) + +/****************************************************************************** + * + * FUNCTION: acpi_enable_all_runtime_gpes + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Enable all "runtime" GPEs, in all GPE blocks + * + ******************************************************************************/ + +acpi_status acpi_enable_all_runtime_gpes(void) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_enable_all_runtime_gpes); + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + status = acpi_hw_enable_all_runtime_gpes(); + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_enable_all_runtime_gpes) + +/****************************************************************************** + * + * FUNCTION: acpi_enable_all_wakeup_gpes + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Enable all "wakeup" GPEs and disable all of the other GPEs, in + * all GPE blocks. + * + ******************************************************************************/ +acpi_status acpi_enable_all_wakeup_gpes(void) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_enable_all_wakeup_gpes); + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + status = acpi_hw_enable_all_wakeup_gpes(); + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_enable_all_wakeup_gpes) + +/****************************************************************************** + * + * FUNCTION: acpi_any_gpe_status_set + * + * PARAMETERS: gpe_skip_number - Number of the GPE to skip + * + * RETURN: Whether or not the status bit is set for any GPE + * + * DESCRIPTION: Check the status bits of all enabled GPEs, except for the one + * represented by the "skip" argument, and return TRUE if any of + * them is set or FALSE otherwise. + * + ******************************************************************************/ +u32 acpi_any_gpe_status_set(u32 gpe_skip_number) +{ + acpi_status status; + acpi_handle gpe_device; + u8 ret; + + ACPI_FUNCTION_TRACE(acpi_any_gpe_status_set); + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return (FALSE); + } + + status = acpi_get_gpe_device(gpe_skip_number, &gpe_device); + if (ACPI_FAILURE(status)) { + gpe_device = NULL; + } + + ret = acpi_hw_check_all_gpes(gpe_device, gpe_skip_number); + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + + return (ret); +} + +ACPI_EXPORT_SYMBOL(acpi_any_gpe_status_set) + +/******************************************************************************* + * + * FUNCTION: acpi_install_gpe_block + * + * PARAMETERS: gpe_device - Handle to the parent GPE Block Device + * gpe_block_address - Address and space_ID + * register_count - Number of GPE register pairs in the block + * interrupt_number - H/W interrupt for the block + * + * RETURN: Status + * + * DESCRIPTION: Create and Install a block of GPE registers. The GPEs are not + * enabled here. + * + ******************************************************************************/ +acpi_status +acpi_install_gpe_block(acpi_handle gpe_device, + struct acpi_generic_address *gpe_block_address, + u32 register_count, u32 interrupt_number) +{ + acpi_status status; + union acpi_operand_object *obj_desc; + struct acpi_namespace_node *node; + struct acpi_gpe_block_info *gpe_block; + + ACPI_FUNCTION_TRACE(acpi_install_gpe_block); + + if ((!gpe_device) || (!gpe_block_address) || (!register_count)) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + node = acpi_ns_validate_handle(gpe_device); + if (!node) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } + + /* Validate the parent device */ + + if (node->type != ACPI_TYPE_DEVICE) { + status = AE_TYPE; + goto unlock_and_exit; + } + + if (node->object) { + status = AE_ALREADY_EXISTS; + goto unlock_and_exit; + } + + /* + * For user-installed GPE Block Devices, the gpe_block_base_number + * is always zero + */ + status = acpi_ev_create_gpe_block(node, gpe_block_address->address, + gpe_block_address->space_id, + register_count, 0, interrupt_number, + &gpe_block); + if (ACPI_FAILURE(status)) { + goto unlock_and_exit; + } + + /* Install block in the device_object attached to the node */ + + obj_desc = acpi_ns_get_attached_object(node); + if (!obj_desc) { + + /* + * No object, create a new one (Device nodes do not always have + * an attached object) + */ + obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_DEVICE); + if (!obj_desc) { + status = AE_NO_MEMORY; + goto unlock_and_exit; + } + + status = + acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_DEVICE); + + /* Remove local reference to the object */ + + acpi_ut_remove_reference(obj_desc); + + if (ACPI_FAILURE(status)) { + goto unlock_and_exit; + } + } + + /* Now install the GPE block in the device_object */ + + obj_desc->device.gpe_block = gpe_block; + +unlock_and_exit: + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_install_gpe_block) + +/******************************************************************************* + * + * FUNCTION: acpi_remove_gpe_block + * + * PARAMETERS: gpe_device - Handle to the parent GPE Block Device + * + * RETURN: Status + * + * DESCRIPTION: Remove a previously installed block of GPE registers + * + ******************************************************************************/ +acpi_status acpi_remove_gpe_block(acpi_handle gpe_device) +{ + union acpi_operand_object *obj_desc; + acpi_status status; + struct acpi_namespace_node *node; + + ACPI_FUNCTION_TRACE(acpi_remove_gpe_block); + + if (!gpe_device) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + node = acpi_ns_validate_handle(gpe_device); + if (!node) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } + + /* Validate the parent device */ + + if (node->type != ACPI_TYPE_DEVICE) { + status = AE_TYPE; + goto unlock_and_exit; + } + + /* Get the device_object attached to the node */ + + obj_desc = acpi_ns_get_attached_object(node); + if (!obj_desc || !obj_desc->device.gpe_block) { + return_ACPI_STATUS(AE_NULL_OBJECT); + } + + /* Delete the GPE block (but not the device_object) */ + + status = acpi_ev_delete_gpe_block(obj_desc->device.gpe_block); + if (ACPI_SUCCESS(status)) { + obj_desc->device.gpe_block = NULL; + } + +unlock_and_exit: + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_remove_gpe_block) + +/******************************************************************************* + * + * FUNCTION: acpi_get_gpe_device + * + * PARAMETERS: index - System GPE index (0-current_gpe_count) + * gpe_device - Where the parent GPE Device is returned + * + * RETURN: Status + * + * DESCRIPTION: Obtain the GPE device associated with the input index. A NULL + * gpe device indicates that the gpe number is contained in one of + * the FADT-defined gpe blocks. Otherwise, the GPE block device. + * + ******************************************************************************/ +acpi_status acpi_get_gpe_device(u32 index, acpi_handle *gpe_device) +{ + struct acpi_gpe_device_info info; + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_get_gpe_device); + + if (!gpe_device) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + if (index >= acpi_current_gpe_count) { + return_ACPI_STATUS(AE_NOT_EXIST); + } + + /* Setup and walk the GPE list */ + + info.index = index; + info.status = AE_NOT_EXIST; + info.gpe_device = NULL; + info.next_block_base_index = 0; + + status = acpi_ev_walk_gpe_list(acpi_ev_get_gpe_device, &info); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + *gpe_device = ACPI_CAST_PTR(acpi_handle, info.gpe_device); + return_ACPI_STATUS(info.status); +} + +ACPI_EXPORT_SYMBOL(acpi_get_gpe_device) +#endif /* !ACPI_REDUCED_HARDWARE */ |