1 files changed, 298 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/utresdecode.c b/drivers/acpi/acpica/utresdecode.c
new file mode 100644
index 0000000000..d801d90698
--- /dev/null
+++ b/drivers/acpi/acpica/utresdecode.c
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/*******************************************************************************
+ *
+ * Module Name: utresdecode - Resource descriptor keyword strings
+ *
+ ******************************************************************************/
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acresrc.h"
+
+#define _COMPONENT          ACPI_UTILITIES
+ACPI_MODULE_NAME("utresdecode")
+
+#if defined (ACPI_DEBUG_OUTPUT) || \
+	defined (ACPI_DISASSEMBLER) || \
+	defined (ACPI_DEBUGGER)
+/*
+ * Strings used to decode resource descriptors.
+ * Used by both the disassembler and the debugger resource dump routines
+ */
+const char *acpi_gbl_bm_decode[] = {
+	"NotBusMaster",
+	"BusMaster"
+};
+
+const char *acpi_gbl_config_decode[] = {
+	"0 - Good Configuration",
+	"1 - Acceptable Configuration",
+	"2 - Suboptimal Configuration",
+	"3 - ***Invalid Configuration***",
+};
+
+const char *acpi_gbl_consume_decode[] = {
+	"ResourceProducer",
+	"ResourceConsumer"
+};
+
+const char *acpi_gbl_dec_decode[] = {
+	"PosDecode",
+	"SubDecode"
+};
+
+const char *acpi_gbl_he_decode[] = {
+	"Level",
+	"Edge"
+};
+
+const char *acpi_gbl_io_decode[] = {
+	"Decode10",
+	"Decode16"
+};
+
+const char *acpi_gbl_ll_decode[] = {
+	"ActiveHigh",
+	"ActiveLow",
+	"ActiveBoth",
+	"Reserved"
+};
+
+const char *acpi_gbl_max_decode[] = {
+	"MaxNotFixed",
+	"MaxFixed"
+};
+
+const char *acpi_gbl_mem_decode[] = {
+	"NonCacheable",
+	"Cacheable",
+	"WriteCombining",
+	"Prefetchable"
+};
+
+const char *acpi_gbl_min_decode[] = {
+	"MinNotFixed",
+	"MinFixed"
+};
+
+const char *acpi_gbl_mtp_decode[] = {
+	"AddressRangeMemory",
+	"AddressRangeReserved",
+	"AddressRangeACPI",
+	"AddressRangeNVS"
+};
+
+const char *acpi_gbl_phy_decode[] = {
+	"Type C",
+	"Type D",
+	"Unknown Type",
+	"Unknown Type"
+};
+
+const char *acpi_gbl_rng_decode[] = {
+	"InvalidRanges",
+	"NonISAOnlyRanges",
+	"ISAOnlyRanges",
+	"EntireRange"
+};
+
+const char *acpi_gbl_rw_decode[] = {
+	"ReadOnly",
+	"ReadWrite"
+};
+
+const char *acpi_gbl_shr_decode[] = {
+	"Exclusive",
+	"Shared",
+	"ExclusiveAndWake",	/* ACPI 5.0 */
+	"SharedAndWake"		/* ACPI 5.0 */
+};
+
+const char *acpi_gbl_siz_decode[] = {
+	"Transfer8",
+	"Transfer8_16",
+	"Transfer16",
+	"InvalidSize"
+};
+
+const char *acpi_gbl_trs_decode[] = {
+	"DenseTranslation",
+	"SparseTranslation"
+};
+
+const char *acpi_gbl_ttp_decode[] = {
+	"TypeStatic",
+	"TypeTranslation"
+};
+
+const char *acpi_gbl_typ_decode[] = {
+	"Compatibility",
+	"TypeA",
+	"TypeB",
+	"TypeF"
+};
+
+const char *acpi_gbl_ppc_decode[] = {
+	"PullDefault",
+	"PullUp",
+	"PullDown",
+	"PullNone"
+};
+
+const char *acpi_gbl_ior_decode[] = {
+	"IoRestrictionNone",
+	"IoRestrictionInputOnly",
+	"IoRestrictionOutputOnly",
+	"IoRestrictionNoneAndPreserve"
+};
+
+const char *acpi_gbl_dts_decode[] = {
+	"Width8bit",
+	"Width16bit",
+	"Width32bit",
+	"Width64bit",
+	"Width128bit",
+	"Width256bit",
+};
+
+/* GPIO connection type */
+
+const char *acpi_gbl_ct_decode[] = {
+	"Interrupt",
+	"I/O"
+};
+
+/* Serial bus type */
+
+const char *acpi_gbl_sbt_decode[] = {
+	"/* UNKNOWN serial bus type */",
+	"I2C",
+	"SPI",
+	"UART",
+	"CSI2"
+};
+
+/* I2C serial bus access mode */
+
+const char *acpi_gbl_am_decode[] = {
+	"AddressingMode7Bit",
+	"AddressingMode10Bit"
+};
+
+/* I2C serial bus slave mode */
+
+const char *acpi_gbl_sm_decode[] = {
+	"ControllerInitiated",
+	"DeviceInitiated"
+};
+
+/* SPI serial bus wire mode */
+
+const char *acpi_gbl_wm_decode[] = {
+	"FourWireMode",
+	"ThreeWireMode"
+};
+
+/* SPI serial clock phase */
+
+const char *acpi_gbl_cph_decode[] = {
+	"ClockPhaseFirst",
+	"ClockPhaseSecond"
+};
+
+/* SPI serial bus clock polarity */
+
+const char *acpi_gbl_cpo_decode[] = {
+	"ClockPolarityLow",
+	"ClockPolarityHigh"
+};
+
+/* SPI serial bus device polarity */
+
+const char *acpi_gbl_dp_decode[] = {
+	"PolarityLow",
+	"PolarityHigh"
+};
+
+/* UART serial bus endian */
+
+const char *acpi_gbl_ed_decode[] = {
+	"LittleEndian",
+	"BigEndian"
+};
+
+/* UART serial bus bits per byte */
+
+const char *acpi_gbl_bpb_decode[] = {
+	"DataBitsFive",
+	"DataBitsSix",
+	"DataBitsSeven",
+	"DataBitsEight",
+	"DataBitsNine",
+	"/* UNKNOWN Bits per byte */",
+	"/* UNKNOWN Bits per byte */",
+	"/* UNKNOWN Bits per byte */"
+};
+
+/* UART serial bus stop bits */
+
+const char *acpi_gbl_sb_decode[] = {
+	"StopBitsZero",
+	"StopBitsOne",
+	"StopBitsOnePlusHalf",
+	"StopBitsTwo"
+};
+
+/* UART serial bus flow control */
+
+const char *acpi_gbl_fc_decode[] = {
+	"FlowControlNone",
+	"FlowControlHardware",
+	"FlowControlXON",
+	"/* UNKNOWN flow control keyword */"
+};
+
+/* UART serial bus parity type */
+
+const char *acpi_gbl_pt_decode[] = {
+	"ParityTypeNone",
+	"ParityTypeEven",
+	"ParityTypeOdd",
+	"ParityTypeMark",
+	"ParityTypeSpace",
+	"/* UNKNOWN parity keyword */",
+	"/* UNKNOWN parity keyword */",
+	"/* UNKNOWN parity keyword */"
+};
+
+/* pin_config type */
+
+const char *acpi_gbl_ptyp_decode[] = {
+	"Default",
+	"Bias Pull-up",
+	"Bias Pull-down",
+	"Bias Default",
+	"Bias Disable",
+	"Bias High Impedance",
+	"Bias Bus Hold",
+	"Drive Open Drain",
+	"Drive Open Source",
+	"Drive Push Pull",
+	"Drive Strength",
+	"Slew Rate",
+	"Input Debounce",
+	"Input Schmitt Trigger",
+};
+
+const char *acpi_gbl_clock_input_mode[] = {
+	"Fixed",
+	"Variable",
+};
+
+const char *acpi_gbl_clock_input_scale[] = {
+	"Hz",
+	"KHz",
+	"MHz",
+};
+
+#endif