summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_cmd64x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_cmd64x.c')
-rw-r--r--drivers/ata/pata_cmd64x.c534
1 files changed, 534 insertions, 0 deletions
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
new file mode 100644
index 0000000000..fafea2b791
--- /dev/null
+++ b/drivers/ata/pata_cmd64x.c
@@ -0,0 +1,534 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * pata_cmd64x.c - CMD64x PATA for new ATA layer
+ * (C) 2005 Red Hat Inc
+ * Alan Cox <alan@lxorguk.ukuu.org.uk>
+ * (C) 2009-2010 Bartlomiej Zolnierkiewicz
+ * (C) 2012 MontaVista Software, LLC <source@mvista.com>
+ *
+ * Based upon
+ * linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002
+ *
+ * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
+ * Note, this driver is not used at all on other systems because
+ * there the "BIOS" has done all of the following already.
+ * Due to massive hardware bugs, UltraDMA is only supported
+ * on the 646U2 and not on the 646U.
+ *
+ * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
+ * Copyright (C) 1998 David S. Miller (davem@redhat.com)
+ *
+ * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
+ *
+ * TODO
+ * Testing work
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_cmd64x"
+#define DRV_VERSION "0.2.18"
+
+/*
+ * CMD64x specific registers definition.
+ */
+
+enum {
+ CFR = 0x50,
+ CFR_INTR_CH0 = 0x04,
+ CNTRL = 0x51,
+ CNTRL_CH0 = 0x04,
+ CNTRL_CH1 = 0x08,
+ CMDTIM = 0x52,
+ ARTTIM0 = 0x53,
+ DRWTIM0 = 0x54,
+ ARTTIM1 = 0x55,
+ DRWTIM1 = 0x56,
+ ARTTIM23 = 0x57,
+ ARTTIM23_DIS_RA2 = 0x04,
+ ARTTIM23_DIS_RA3 = 0x08,
+ ARTTIM23_INTR_CH1 = 0x10,
+ DRWTIM2 = 0x58,
+ BRST = 0x59,
+ DRWTIM3 = 0x5b,
+ BMIDECR0 = 0x70,
+ MRDMODE = 0x71,
+ MRDMODE_INTR_CH0 = 0x04,
+ MRDMODE_INTR_CH1 = 0x08,
+ BMIDESR0 = 0x72,
+ UDIDETCR0 = 0x73,
+ DTPR0 = 0x74,
+ BMIDECR1 = 0x78,
+ BMIDECSR = 0x79,
+ UDIDETCR1 = 0x7B,
+ DTPR1 = 0x7C
+};
+
+static int cmd648_cable_detect(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u8 r;
+
+ /* Check cable detect bits */
+ pci_read_config_byte(pdev, BMIDECSR, &r);
+ if (r & (1 << ap->port_no))
+ return ATA_CBL_PATA80;
+ return ATA_CBL_PATA40;
+}
+
+/**
+ * cmd64x_set_timing - set PIO and MWDMA timing
+ * @ap: ATA interface
+ * @adev: ATA device
+ * @mode: mode
+ *
+ * Called to do the PIO and MWDMA mode setup.
+ */
+
+static void cmd64x_set_timing(struct ata_port *ap, struct ata_device *adev, u8 mode)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct ata_timing t;
+ const unsigned long T = 1000000 / 33;
+ const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 };
+
+ u8 reg;
+
+ /* Port layout is not logical so use a table */
+ const u8 arttim_port[2][2] = {
+ { ARTTIM0, ARTTIM1 },
+ { ARTTIM23, ARTTIM23 }
+ };
+ const u8 drwtim_port[2][2] = {
+ { DRWTIM0, DRWTIM1 },
+ { DRWTIM2, DRWTIM3 }
+ };
+
+ int arttim = arttim_port[ap->port_no][adev->devno];
+ int drwtim = drwtim_port[ap->port_no][adev->devno];
+
+ /* ata_timing_compute is smart and will produce timings for MWDMA
+ that don't violate the drives PIO capabilities. */
+ if (ata_timing_compute(adev, mode, &t, T, 0) < 0) {
+ ata_dev_err(adev, DRV_NAME ": mode computation failed.\n");
+ return;
+ }
+ if (ap->port_no) {
+ /* Slave has shared address setup */
+ struct ata_device *pair = ata_dev_pair(adev);
+
+ if (pair) {
+ struct ata_timing tp;
+ ata_timing_compute(pair, pair->pio_mode, &tp, T, 0);
+ ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
+ }
+ }
+
+ ata_dev_dbg(adev, DRV_NAME ": active %d recovery %d setup %d.\n",
+ t.active, t.recover, t.setup);
+ if (t.recover > 16) {
+ t.active += t.recover - 16;
+ t.recover = 16;
+ }
+ if (t.active > 16)
+ t.active = 16;
+
+ /* Now convert the clocks into values we can actually stuff into
+ the chip */
+
+ if (t.recover == 16)
+ t.recover = 0;
+ else if (t.recover > 1)
+ t.recover--;
+ else
+ t.recover = 15;
+
+ if (t.setup > 4)
+ t.setup = 0xC0;
+ else
+ t.setup = setup_data[t.setup];
+
+ t.active &= 0x0F; /* 0 = 16 */
+
+ /* Load setup timing */
+ pci_read_config_byte(pdev, arttim, &reg);
+ reg &= 0x3F;
+ reg |= t.setup;
+ pci_write_config_byte(pdev, arttim, reg);
+
+ /* Load active/recovery */
+ pci_write_config_byte(pdev, drwtim, (t.active << 4) | t.recover);
+}
+
+/**
+ * cmd64x_set_piomode - set initial PIO mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Used when configuring the devices ot set the PIO timings. All the
+ * actual work is done by the PIO/MWDMA setting helper
+ */
+
+static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ cmd64x_set_timing(ap, adev, adev->pio_mode);
+}
+
+/**
+ * cmd64x_set_dmamode - set initial DMA mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Called to do the DMA mode setup.
+ */
+
+static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ static const u8 udma_data[] = {
+ 0x30, 0x20, 0x10, 0x20, 0x10, 0x00
+ };
+
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u8 regU, regD;
+
+ int pciU = UDIDETCR0 + 8 * ap->port_no;
+ int pciD = BMIDESR0 + 8 * ap->port_no;
+ int shift = 2 * adev->devno;
+
+ pci_read_config_byte(pdev, pciD, &regD);
+ pci_read_config_byte(pdev, pciU, &regU);
+
+ /* DMA bits off */
+ regD &= ~(0x20 << adev->devno);
+ /* DMA control bits */
+ regU &= ~(0x30 << shift);
+ /* DMA timing bits */
+ regU &= ~(0x05 << adev->devno);
+
+ if (adev->dma_mode >= XFER_UDMA_0) {
+ /* Merge the timing value */
+ regU |= udma_data[adev->dma_mode - XFER_UDMA_0] << shift;
+ /* Merge the control bits */
+ regU |= 1 << adev->devno; /* UDMA on */
+ if (adev->dma_mode > XFER_UDMA_2) /* 15nS timing */
+ regU |= 4 << adev->devno;
+ } else {
+ regU &= ~ (1 << adev->devno); /* UDMA off */
+ cmd64x_set_timing(ap, adev, adev->dma_mode);
+ }
+
+ regD |= 0x20 << adev->devno;
+
+ pci_write_config_byte(pdev, pciU, regU);
+ pci_write_config_byte(pdev, pciD, regD);
+}
+
+/**
+ * cmd64x_sff_irq_check - check IDE interrupt
+ * @ap: ATA interface
+ *
+ * Check IDE interrupt in CFR/ARTTIM23 registers.
+ */
+
+static bool cmd64x_sff_irq_check(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int irq_mask = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
+ int irq_reg = ap->port_no ? ARTTIM23 : CFR;
+ u8 irq_stat;
+
+ /* NOTE: reading the register should clear the interrupt */
+ pci_read_config_byte(pdev, irq_reg, &irq_stat);
+
+ return irq_stat & irq_mask;
+}
+
+/**
+ * cmd64x_sff_irq_clear - clear IDE interrupt
+ * @ap: ATA interface
+ *
+ * Clear IDE interrupt in CFR/ARTTIM23 and DMA status registers.
+ */
+
+static void cmd64x_sff_irq_clear(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int irq_reg = ap->port_no ? ARTTIM23 : CFR;
+ u8 irq_stat;
+
+ ata_bmdma_irq_clear(ap);
+
+ /* Reading the register should be enough to clear the interrupt */
+ pci_read_config_byte(pdev, irq_reg, &irq_stat);
+}
+
+/**
+ * cmd648_sff_irq_check - check IDE interrupt
+ * @ap: ATA interface
+ *
+ * Check IDE interrupt in MRDMODE register.
+ */
+
+static bool cmd648_sff_irq_check(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ unsigned long base = pci_resource_start(pdev, 4);
+ int irq_mask = ap->port_no ? MRDMODE_INTR_CH1 : MRDMODE_INTR_CH0;
+ u8 mrdmode = inb(base + 1);
+
+ return mrdmode & irq_mask;
+}
+
+/**
+ * cmd648_sff_irq_clear - clear IDE interrupt
+ * @ap: ATA interface
+ *
+ * Clear IDE interrupt in MRDMODE and DMA status registers.
+ */
+
+static void cmd648_sff_irq_clear(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ unsigned long base = pci_resource_start(pdev, 4);
+ int irq_mask = ap->port_no ? MRDMODE_INTR_CH1 : MRDMODE_INTR_CH0;
+ u8 mrdmode;
+
+ ata_bmdma_irq_clear(ap);
+
+ /* Clear this port's interrupt bit (leaving the other port alone) */
+ mrdmode = inb(base + 1);
+ mrdmode &= ~(MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1);
+ outb(mrdmode | irq_mask, base + 1);
+}
+
+/**
+ * cmd646r1_bmdma_stop - DMA stop callback
+ * @qc: Command in progress
+ *
+ * Stub for now while investigating the r1 quirk in the old driver.
+ */
+
+static void cmd646r1_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ ata_bmdma_stop(qc);
+}
+
+static const struct scsi_host_template cmd64x_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static const struct ata_port_operations cmd64x_base_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .set_piomode = cmd64x_set_piomode,
+ .set_dmamode = cmd64x_set_dmamode,
+};
+
+static struct ata_port_operations cmd64x_port_ops = {
+ .inherits = &cmd64x_base_ops,
+ .sff_irq_check = cmd64x_sff_irq_check,
+ .sff_irq_clear = cmd64x_sff_irq_clear,
+ .cable_detect = ata_cable_40wire,
+};
+
+static struct ata_port_operations cmd646r1_port_ops = {
+ .inherits = &cmd64x_base_ops,
+ .sff_irq_check = cmd64x_sff_irq_check,
+ .sff_irq_clear = cmd64x_sff_irq_clear,
+ .bmdma_stop = cmd646r1_bmdma_stop,
+ .cable_detect = ata_cable_40wire,
+};
+
+static struct ata_port_operations cmd646r3_port_ops = {
+ .inherits = &cmd64x_base_ops,
+ .sff_irq_check = cmd648_sff_irq_check,
+ .sff_irq_clear = cmd648_sff_irq_clear,
+ .cable_detect = ata_cable_40wire,
+};
+
+static struct ata_port_operations cmd648_port_ops = {
+ .inherits = &cmd64x_base_ops,
+ .sff_irq_check = cmd648_sff_irq_check,
+ .sff_irq_clear = cmd648_sff_irq_clear,
+ .cable_detect = cmd648_cable_detect,
+};
+
+static void cmd64x_fixup(struct pci_dev *pdev)
+{
+ u8 mrdmode;
+
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
+ pci_read_config_byte(pdev, MRDMODE, &mrdmode);
+ mrdmode &= ~0x30; /* IRQ set up */
+ mrdmode |= 0x02; /* Memory read line enable */
+ pci_write_config_byte(pdev, MRDMODE, mrdmode);
+
+ /* PPC specific fixup copied from old driver */
+#ifdef CONFIG_PPC
+ pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
+#endif
+}
+
+static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ static const struct ata_port_info cmd_info[7] = {
+ { /* CMD 643 - no UDMA */
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .port_ops = &cmd64x_port_ops
+ },
+ { /* CMD 646 with broken UDMA */
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .port_ops = &cmd64x_port_ops
+ },
+ { /* CMD 646U with broken UDMA */
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .port_ops = &cmd646r3_port_ops
+ },
+ { /* CMD 646U2 with working UDMA */
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA2,
+ .port_ops = &cmd646r3_port_ops
+ },
+ { /* CMD 646 rev 1 */
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .port_ops = &cmd646r1_port_ops
+ },
+ { /* CMD 648 */
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA4,
+ .port_ops = &cmd648_port_ops
+ },
+ { /* CMD 649 */
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA5,
+ .port_ops = &cmd648_port_ops
+ }
+ };
+ const struct ata_port_info *ppi[] = {
+ &cmd_info[id->driver_data],
+ &cmd_info[id->driver_data],
+ NULL
+ };
+ u8 reg;
+ int rc;
+ struct pci_dev *bridge = pdev->bus->self;
+ /* mobility split bridges don't report enabled ports correctly */
+ int port_ok = !(bridge && bridge->vendor ==
+ PCI_VENDOR_ID_MOBILITY_ELECTRONICS);
+ /* all (with exceptions below) apart from 643 have CNTRL_CH0 bit */
+ int cntrl_ch0_ok = (id->driver_data != 0);
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ if (id->driver_data == 0) /* 643 */
+ ata_pci_bmdma_clear_simplex(pdev);
+
+ if (pdev->device == PCI_DEVICE_ID_CMD_646)
+ switch (pdev->revision) {
+ /* UDMA works since rev 5 */
+ default:
+ ppi[0] = &cmd_info[3];
+ ppi[1] = &cmd_info[3];
+ break;
+ /* Interrupts in MRDMODE since rev 3 */
+ case 3:
+ case 4:
+ ppi[0] = &cmd_info[2];
+ ppi[1] = &cmd_info[2];
+ break;
+ /* Rev 1 with other problems? */
+ case 1:
+ ppi[0] = &cmd_info[4];
+ ppi[1] = &cmd_info[4];
+ fallthrough;
+ /* Early revs have no CNTRL_CH0 */
+ case 2:
+ case 0:
+ cntrl_ch0_ok = 0;
+ break;
+ }
+
+ cmd64x_fixup(pdev);
+
+ /* check for enabled ports */
+ pci_read_config_byte(pdev, CNTRL, &reg);
+ if (!port_ok)
+ dev_notice(&pdev->dev, "Mobility Bridge detected, ignoring CNTRL port enable/disable\n");
+ if (port_ok && cntrl_ch0_ok && !(reg & CNTRL_CH0)) {
+ dev_notice(&pdev->dev, "Primary port is disabled\n");
+ ppi[0] = &ata_dummy_port_info;
+
+ }
+ if (port_ok && !(reg & CNTRL_CH1)) {
+ dev_notice(&pdev->dev, "Secondary port is disabled\n");
+ ppi[1] = &ata_dummy_port_info;
+ }
+
+ return ata_pci_bmdma_init_one(pdev, ppi, &cmd64x_sht, NULL, 0);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cmd64x_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = pci_get_drvdata(pdev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ cmd64x_fixup(pdev);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
+static const struct pci_device_id cmd64x[] = {
+ { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 },
+ { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_646), 1 },
+ { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_648), 5 },
+ { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_649), 6 },
+
+ { },
+};
+
+static struct pci_driver cmd64x_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = cmd64x,
+ .probe = cmd64x_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+ .suspend = ata_pci_device_suspend,
+ .resume = cmd64x_reinit_one,
+#endif
+};
+
+module_pci_driver(cmd64x_pci_driver);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for CMD64x series PATA controllers");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cmd64x);
+MODULE_VERSION(DRV_VERSION);