summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_pdc2027x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_pdc2027x.c')
-rw-r--r--drivers/ata/pata_pdc2027x.c760
1 files changed, 760 insertions, 0 deletions
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
new file mode 100644
index 0000000000..6820c5597b
--- /dev/null
+++ b/drivers/ata/pata_pdc2027x.c
@@ -0,0 +1,760 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Promise PATA TX2/TX4/TX2000/133 IDE driver for pdc20268 to pdc20277.
+ *
+ * Ported to libata by:
+ * Albert Lee <albertcc@tw.ibm.com> IBM Corporation
+ *
+ * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>
+ * Portions Copyright (C) 1999 Promise Technology, Inc.
+ *
+ * Author: Frank Tiernan (frankt@promise.com)
+ * Released under terms of General Public License
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/driver-api/libata.rst
+ *
+ * Hardware information only available under NDA.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/ktime.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_pdc2027x"
+#define DRV_VERSION "1.0"
+
+enum {
+ PDC_MMIO_BAR = 5,
+
+ PDC_UDMA_100 = 0,
+ PDC_UDMA_133 = 1,
+
+ PDC_100_MHZ = 100000000,
+ PDC_133_MHZ = 133333333,
+
+ PDC_SYS_CTL = 0x1100,
+ PDC_ATA_CTL = 0x1104,
+ PDC_GLOBAL_CTL = 0x1108,
+ PDC_CTCR0 = 0x110C,
+ PDC_CTCR1 = 0x1110,
+ PDC_BYTE_COUNT = 0x1120,
+ PDC_PLL_CTL = 0x1202,
+};
+
+static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+#ifdef CONFIG_PM_SLEEP
+static int pdc2027x_reinit_one(struct pci_dev *pdev);
+#endif
+static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline);
+static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev);
+static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev);
+static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc);
+static unsigned int pdc2027x_mode_filter(struct ata_device *adev, unsigned int mask);
+static int pdc2027x_cable_detect(struct ata_port *ap);
+static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed);
+
+/*
+ * ATA Timing Tables based on 133MHz controller clock.
+ * These tables are only used when the controller is in 133MHz clock.
+ * If the controller is in 100MHz clock, the ASIC hardware will
+ * set the timing registers automatically when "set feature" command
+ * is issued to the device. However, if the controller clock is 133MHz,
+ * the following tables must be used.
+ */
+static const struct pdc2027x_pio_timing {
+ u8 value0, value1, value2;
+} pdc2027x_pio_timing_tbl[] = {
+ { 0xfb, 0x2b, 0xac }, /* PIO mode 0 */
+ { 0x46, 0x29, 0xa4 }, /* PIO mode 1 */
+ { 0x23, 0x26, 0x64 }, /* PIO mode 2 */
+ { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */
+ { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */
+};
+
+static const struct pdc2027x_mdma_timing {
+ u8 value0, value1;
+} pdc2027x_mdma_timing_tbl[] = {
+ { 0xdf, 0x5f }, /* MDMA mode 0 */
+ { 0x6b, 0x27 }, /* MDMA mode 1 */
+ { 0x69, 0x25 }, /* MDMA mode 2 */
+};
+
+static const struct pdc2027x_udma_timing {
+ u8 value0, value1, value2;
+} pdc2027x_udma_timing_tbl[] = {
+ { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */
+ { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */
+ { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */
+ { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */
+ { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */
+ { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */
+ { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */
+};
+
+static const struct pci_device_id pdc2027x_pci_tbl[] = {
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20268), PDC_UDMA_100 },
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20269), PDC_UDMA_133 },
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20270), PDC_UDMA_100 },
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20271), PDC_UDMA_133 },
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20275), PDC_UDMA_133 },
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20276), PDC_UDMA_133 },
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20277), PDC_UDMA_133 },
+
+ { } /* terminate list */
+};
+
+static struct pci_driver pdc2027x_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = pdc2027x_pci_tbl,
+ .probe = pdc2027x_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+ .suspend = ata_pci_device_suspend,
+ .resume = pdc2027x_reinit_one,
+#endif
+};
+
+static const struct scsi_host_template pdc2027x_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations pdc2027x_pata100_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .check_atapi_dma = pdc2027x_check_atapi_dma,
+ .cable_detect = pdc2027x_cable_detect,
+ .prereset = pdc2027x_prereset,
+};
+
+static struct ata_port_operations pdc2027x_pata133_ops = {
+ .inherits = &pdc2027x_pata100_ops,
+ .mode_filter = pdc2027x_mode_filter,
+ .set_piomode = pdc2027x_set_piomode,
+ .set_dmamode = pdc2027x_set_dmamode,
+ .set_mode = pdc2027x_set_mode,
+};
+
+static struct ata_port_info pdc2027x_port_info[] = {
+ /* PDC_UDMA_100 */
+ {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA5,
+ .port_ops = &pdc2027x_pata100_ops,
+ },
+ /* PDC_UDMA_133 */
+ {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &pdc2027x_pata133_ops,
+ },
+};
+
+MODULE_AUTHOR("Andre Hedrick, Frank Tiernan, Albert Lee");
+MODULE_DESCRIPTION("libata driver module for Promise PDC20268 to PDC20277");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DEVICE_TABLE(pci, pdc2027x_pci_tbl);
+
+/**
+ * port_mmio - Get the MMIO address of PDC2027x extended registers
+ * @ap: Port
+ * @offset: offset from mmio base
+ */
+static inline void __iomem *port_mmio(struct ata_port *ap, unsigned int offset)
+{
+ return ap->host->iomap[PDC_MMIO_BAR] + ap->port_no * 0x100 + offset;
+}
+
+/**
+ * dev_mmio - Get the MMIO address of PDC2027x extended registers
+ * @ap: Port
+ * @adev: device
+ * @offset: offset from mmio base
+ */
+static inline void __iomem *dev_mmio(struct ata_port *ap, struct ata_device *adev, unsigned int offset)
+{
+ u8 adj = (adev->devno) ? 0x08 : 0x00;
+ return port_mmio(ap, offset) + adj;
+}
+
+/**
+ * pdc2027x_cable_detect - Probe host controller cable detect info
+ * @ap: Port for which cable detect info is desired
+ *
+ * Read 80c cable indicator from Promise extended register.
+ * This register is latched when the system is reset.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+static int pdc2027x_cable_detect(struct ata_port *ap)
+{
+ u32 cgcr;
+
+ /* check cable detect results */
+ cgcr = ioread32(port_mmio(ap, PDC_GLOBAL_CTL));
+ if (cgcr & (1 << 26))
+ goto cbl40;
+
+ ata_port_dbg(ap, "No cable or 80-conductor cable\n");
+
+ return ATA_CBL_PATA80;
+cbl40:
+ ata_port_info(ap, DRV_NAME ":40-conductor cable detected\n");
+ return ATA_CBL_PATA40;
+}
+
+/**
+ * pdc2027x_port_enabled - Check PDC ATA control register to see whether the port is enabled.
+ * @ap: Port to check
+ */
+static inline int pdc2027x_port_enabled(struct ata_port *ap)
+{
+ return ioread8(port_mmio(ap, PDC_ATA_CTL)) & 0x02;
+}
+
+/**
+ * pdc2027x_prereset - prereset for PATA host controller
+ * @link: Target link
+ * @deadline: deadline jiffies for the operation
+ *
+ * Probeinit including cable detection.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline)
+{
+ /* Check whether port enabled */
+ if (!pdc2027x_port_enabled(link->ap))
+ return -ENOENT;
+ return ata_sff_prereset(link, deadline);
+}
+
+/**
+ * pdc2027x_mode_filter - mode selection filter
+ * @adev: ATA device
+ * @mask: list of modes proposed
+ *
+ * Block UDMA on devices that cause trouble with this controller.
+ */
+
+static unsigned int pdc2027x_mode_filter(struct ata_device *adev, unsigned int mask)
+{
+ unsigned char model_num[ATA_ID_PROD_LEN + 1];
+ struct ata_device *pair = ata_dev_pair(adev);
+
+ if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL)
+ return mask;
+
+ /* Check for slave of a Maxtor at UDMA6 */
+ ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
+ ATA_ID_PROD_LEN + 1);
+ /* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */
+ if (strstr(model_num, "Maxtor") == NULL && pair->dma_mode == XFER_UDMA_6)
+ mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
+
+ return mask;
+}
+
+/**
+ * pdc2027x_set_piomode - Initialize host controller PATA PIO timings
+ * @ap: Port to configure
+ * @adev: um
+ *
+ * Set PIO mode for device.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ unsigned int pio = adev->pio_mode - XFER_PIO_0;
+ u32 ctcr0, ctcr1;
+
+ ata_port_dbg(ap, "adev->pio_mode[%X]\n", adev->pio_mode);
+
+ /* Sanity check */
+ if (pio > 4) {
+ ata_port_err(ap, "Unknown pio mode [%d] ignored\n", pio);
+ return;
+
+ }
+
+ /* Set the PIO timing registers using value table for 133MHz */
+ ata_port_dbg(ap, "Set pio regs... \n");
+
+ ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0));
+ ctcr0 &= 0xffff0000;
+ ctcr0 |= pdc2027x_pio_timing_tbl[pio].value0 |
+ (pdc2027x_pio_timing_tbl[pio].value1 << 8);
+ iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0));
+
+ ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1));
+ ctcr1 &= 0x00ffffff;
+ ctcr1 |= (pdc2027x_pio_timing_tbl[pio].value2 << 24);
+ iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1));
+
+ ata_port_dbg(ap, "Set to pio mode[%u] \n", pio);
+}
+
+/**
+ * pdc2027x_set_dmamode - Initialize host controller PATA UDMA timings
+ * @ap: Port to configure
+ * @adev: um
+ *
+ * Set UDMA mode for device.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ unsigned int dma_mode = adev->dma_mode;
+ u32 ctcr0, ctcr1;
+
+ if ((dma_mode >= XFER_UDMA_0) &&
+ (dma_mode <= XFER_UDMA_6)) {
+ /* Set the UDMA timing registers with value table for 133MHz */
+ unsigned int udma_mode = dma_mode & 0x07;
+
+ if (dma_mode == XFER_UDMA_2) {
+ /*
+ * Turn off tHOLD.
+ * If tHOLD is '1', the hardware will add half clock for data hold time.
+ * This code segment seems to be no effect. tHOLD will be overwritten below.
+ */
+ ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1));
+ iowrite32(ctcr1 & ~(1 << 7), dev_mmio(ap, adev, PDC_CTCR1));
+ }
+
+ ata_port_dbg(ap, "Set udma regs... \n");
+
+ ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1));
+ ctcr1 &= 0xff000000;
+ ctcr1 |= pdc2027x_udma_timing_tbl[udma_mode].value0 |
+ (pdc2027x_udma_timing_tbl[udma_mode].value1 << 8) |
+ (pdc2027x_udma_timing_tbl[udma_mode].value2 << 16);
+ iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1));
+
+ ata_port_dbg(ap, "Set to udma mode[%u] \n", udma_mode);
+
+ } else if ((dma_mode >= XFER_MW_DMA_0) &&
+ (dma_mode <= XFER_MW_DMA_2)) {
+ /* Set the MDMA timing registers with value table for 133MHz */
+ unsigned int mdma_mode = dma_mode & 0x07;
+
+ ata_port_dbg(ap, "Set mdma regs... \n");
+ ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0));
+
+ ctcr0 &= 0x0000ffff;
+ ctcr0 |= (pdc2027x_mdma_timing_tbl[mdma_mode].value0 << 16) |
+ (pdc2027x_mdma_timing_tbl[mdma_mode].value1 << 24);
+
+ iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0));
+
+ ata_port_dbg(ap, "Set to mdma mode[%u] \n", mdma_mode);
+ } else {
+ ata_port_err(ap, "Unknown dma mode [%u] ignored\n", dma_mode);
+ }
+}
+
+/**
+ * pdc2027x_set_mode - Set the timing registers back to correct values.
+ * @link: link to configure
+ * @r_failed: Returned device for failure
+ *
+ * The pdc2027x hardware will look at "SET FEATURES" and change the timing registers
+ * automatically. The values set by the hardware might be incorrect, under 133Mhz PLL.
+ * This function overwrites the possibly incorrect values set by the hardware to be correct.
+ */
+static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed)
+{
+ struct ata_port *ap = link->ap;
+ struct ata_device *dev;
+ int rc;
+
+ rc = ata_do_set_mode(link, r_failed);
+ if (rc < 0)
+ return rc;
+
+ ata_for_each_dev(dev, link, ENABLED) {
+ pdc2027x_set_piomode(ap, dev);
+
+ /*
+ * Enable prefetch if the device support PIO only.
+ */
+ if (dev->xfer_shift == ATA_SHIFT_PIO) {
+ u32 ctcr1 = ioread32(dev_mmio(ap, dev, PDC_CTCR1));
+ ctcr1 |= (1 << 25);
+ iowrite32(ctcr1, dev_mmio(ap, dev, PDC_CTCR1));
+
+ ata_dev_dbg(dev, "Turn on prefetch\n");
+ } else {
+ pdc2027x_set_dmamode(ap, dev);
+ }
+ }
+ return 0;
+}
+
+/**
+ * pdc2027x_check_atapi_dma - Check whether ATAPI DMA can be supported for this command
+ * @qc: Metadata associated with taskfile to check
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ *
+ * RETURNS: 0 when ATAPI DMA can be used
+ * 1 otherwise
+ */
+static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ u8 *scsicmd = cmd->cmnd;
+ int rc = 1; /* atapi dma off by default */
+
+ /*
+ * This workaround is from Promise's GPL driver.
+ * If ATAPI DMA is used for commands not in the
+ * following white list, say MODE_SENSE and REQUEST_SENSE,
+ * pdc2027x might hit the irq lost problem.
+ */
+ switch (scsicmd[0]) {
+ case READ_10:
+ case WRITE_10:
+ case READ_12:
+ case WRITE_12:
+ case READ_6:
+ case WRITE_6:
+ case 0xad: /* READ_DVD_STRUCTURE */
+ case 0xbe: /* READ_CD */
+ /* ATAPI DMA is ok */
+ rc = 0;
+ break;
+ default:
+ ;
+ }
+
+ return rc;
+}
+
+/**
+ * pdc_read_counter - Read the ctr counter
+ * @host: target ATA host
+ */
+
+static long pdc_read_counter(struct ata_host *host)
+{
+ void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
+ long counter;
+ int retry = 1;
+ u32 bccrl, bccrh, bccrlv, bccrhv;
+
+retry:
+ bccrl = ioread32(mmio_base + PDC_BYTE_COUNT) & 0x7fff;
+ bccrh = ioread32(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff;
+
+ /* Read the counter values again for verification */
+ bccrlv = ioread32(mmio_base + PDC_BYTE_COUNT) & 0x7fff;
+ bccrhv = ioread32(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff;
+
+ counter = (bccrh << 15) | bccrl;
+
+ dev_dbg(host->dev, "bccrh [%X] bccrl [%X]\n", bccrh, bccrl);
+ dev_dbg(host->dev, "bccrhv[%X] bccrlv[%X]\n", bccrhv, bccrlv);
+
+ /*
+ * The 30-bit decreasing counter are read by 2 pieces.
+ * Incorrect value may be read when both bccrh and bccrl are changing.
+ * Ex. When 7900 decrease to 78FF, wrong value 7800 might be read.
+ */
+ if (retry && !(bccrh == bccrhv && bccrl >= bccrlv)) {
+ retry--;
+ dev_dbg(host->dev, "rereading counter\n");
+ goto retry;
+ }
+
+ return counter;
+}
+
+/**
+ * pdc_adjust_pll - Adjust the PLL input clock in Hz.
+ *
+ * @host: target ATA host
+ * @pll_clock: The input of PLL in HZ
+ * @board_idx: board identifier
+ */
+static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int board_idx)
+{
+ void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
+ u16 pll_ctl;
+ long pll_clock_khz = pll_clock / 1000;
+ long pout_required = board_idx? PDC_133_MHZ:PDC_100_MHZ;
+ long ratio = pout_required / pll_clock_khz;
+ int F, R;
+
+ /* Sanity check */
+ if (unlikely(pll_clock_khz < 5000L || pll_clock_khz > 70000L)) {
+ dev_err(host->dev, "Invalid PLL input clock %ldkHz, give up!\n",
+ pll_clock_khz);
+ return;
+ }
+
+ dev_dbg(host->dev, "pout_required is %ld\n", pout_required);
+
+ /* Show the current clock value of PLL control register
+ * (maybe already configured by the firmware)
+ */
+ pll_ctl = ioread16(mmio_base + PDC_PLL_CTL);
+
+ dev_dbg(host->dev, "pll_ctl[%X]\n", pll_ctl);
+
+ /*
+ * Calculate the ratio of F, R and OD
+ * POUT = (F + 2) / (( R + 2) * NO)
+ */
+ if (ratio < 8600L) { /* 8.6x */
+ /* Using NO = 0x01, R = 0x0D */
+ R = 0x0d;
+ } else if (ratio < 12900L) { /* 12.9x */
+ /* Using NO = 0x01, R = 0x08 */
+ R = 0x08;
+ } else if (ratio < 16100L) { /* 16.1x */
+ /* Using NO = 0x01, R = 0x06 */
+ R = 0x06;
+ } else if (ratio < 64000L) { /* 64x */
+ R = 0x00;
+ } else {
+ /* Invalid ratio */
+ dev_err(host->dev, "Invalid ratio %ld, give up!\n", ratio);
+ return;
+ }
+
+ F = (ratio * (R+2)) / 1000 - 2;
+
+ if (unlikely(F < 0 || F > 127)) {
+ /* Invalid F */
+ dev_err(host->dev, "F[%d] invalid!\n", F);
+ return;
+ }
+
+ dev_dbg(host->dev, "F[%d] R[%d] ratio*1000[%ld]\n", F, R, ratio);
+
+ pll_ctl = (R << 8) | F;
+
+ dev_dbg(host->dev, "Writing pll_ctl[%X]\n", pll_ctl);
+
+ iowrite16(pll_ctl, mmio_base + PDC_PLL_CTL);
+ ioread16(mmio_base + PDC_PLL_CTL); /* flush */
+
+ /* Wait the PLL circuit to be stable */
+ msleep(30);
+
+ /*
+ * Show the current clock value of PLL control register
+ * (maybe configured by the firmware)
+ */
+ pll_ctl = ioread16(mmio_base + PDC_PLL_CTL);
+
+ dev_dbg(host->dev, "pll_ctl[%X]\n", pll_ctl);
+
+ return;
+}
+
+/**
+ * pdc_detect_pll_input_clock - Detect the PLL input clock in Hz.
+ * @host: target ATA host
+ * Ex. 16949000 on 33MHz PCI bus for pdc20275.
+ * Half of the PCI clock.
+ */
+static long pdc_detect_pll_input_clock(struct ata_host *host)
+{
+ void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
+ u32 scr;
+ long start_count, end_count;
+ ktime_t start_time, end_time;
+ long pll_clock, usec_elapsed;
+
+ /* Start the test mode */
+ scr = ioread32(mmio_base + PDC_SYS_CTL);
+ dev_dbg(host->dev, "scr[%X]\n", scr);
+ iowrite32(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL);
+ ioread32(mmio_base + PDC_SYS_CTL); /* flush */
+
+ /* Read current counter value */
+ start_count = pdc_read_counter(host);
+ start_time = ktime_get();
+
+ /* Let the counter run for 100 ms. */
+ msleep(100);
+
+ /* Read the counter values again */
+ end_count = pdc_read_counter(host);
+ end_time = ktime_get();
+
+ /* Stop the test mode */
+ scr = ioread32(mmio_base + PDC_SYS_CTL);
+ dev_dbg(host->dev, "scr[%X]\n", scr);
+ iowrite32(scr & ~(0x01 << 14), mmio_base + PDC_SYS_CTL);
+ ioread32(mmio_base + PDC_SYS_CTL); /* flush */
+
+ /* calculate the input clock in Hz */
+ usec_elapsed = (long) ktime_us_delta(end_time, start_time);
+
+ pll_clock = ((start_count - end_count) & 0x3fffffff) / 100 *
+ (100000000 / usec_elapsed);
+
+ dev_dbg(host->dev, "start[%ld] end[%ld] PLL input clock[%ld]HZ\n",
+ start_count, end_count, pll_clock);
+
+ return pll_clock;
+}
+
+/**
+ * pdc_hardware_init - Initialize the hardware.
+ * @host: target ATA host
+ * @board_idx: board identifier
+ */
+static void pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
+{
+ long pll_clock;
+
+ /*
+ * Detect PLL input clock rate.
+ * On some system, where PCI bus is running at non-standard clock rate.
+ * Ex. 25MHz or 40MHz, we have to adjust the cycle_time.
+ * The pdc20275 controller employs PLL circuit to help correct timing registers setting.
+ */
+ pll_clock = pdc_detect_pll_input_clock(host);
+
+ dev_info(host->dev, "PLL input clock %ld kHz\n", pll_clock/1000);
+
+ /* Adjust PLL control register */
+ pdc_adjust_pll(host, pll_clock, board_idx);
+}
+
+/**
+ * pdc_ata_setup_port - setup the mmio address
+ * @port: ata ioports to setup
+ * @base: base address
+ */
+static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base)
+{
+ port->cmd_addr =
+ port->data_addr = base;
+ port->feature_addr =
+ port->error_addr = base + 0x05;
+ port->nsect_addr = base + 0x0a;
+ port->lbal_addr = base + 0x0f;
+ port->lbam_addr = base + 0x10;
+ port->lbah_addr = base + 0x15;
+ port->device_addr = base + 0x1a;
+ port->command_addr =
+ port->status_addr = base + 0x1f;
+ port->altstatus_addr =
+ port->ctl_addr = base + 0x81a;
+}
+
+/**
+ * pdc2027x_init_one - PCI probe function
+ * Called when an instance of PCI adapter is inserted.
+ * This function checks whether the hardware is supported,
+ * initialize hardware and register an instance of ata_host to
+ * libata. (implements struct pci_driver.probe() )
+ *
+ * @pdev: instance of pci_dev found
+ * @ent: matching entry in the id_tbl[]
+ */
+static int pdc2027x_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static const unsigned long cmd_offset[] = { 0x17c0, 0x15c0 };
+ static const unsigned long bmdma_offset[] = { 0x1000, 0x1008 };
+ unsigned int board_idx = (unsigned int) ent->driver_data;
+ const struct ata_port_info *ppi[] =
+ { &pdc2027x_port_info[board_idx], NULL };
+ struct ata_host *host;
+ void __iomem *mmio_base;
+ int i, rc;
+
+ ata_print_version_once(&pdev->dev, DRV_VERSION);
+
+ /* alloc host */
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
+ if (!host)
+ return -ENOMEM;
+
+ /* acquire resources and fill host */
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ rc = pcim_iomap_regions(pdev, 1 << PDC_MMIO_BAR, DRV_NAME);
+ if (rc)
+ return rc;
+ host->iomap = pcim_iomap_table(pdev);
+
+ rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
+ if (rc)
+ return rc;
+
+ mmio_base = host->iomap[PDC_MMIO_BAR];
+
+ for (i = 0; i < 2; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ pdc_ata_setup_port(&ap->ioaddr, mmio_base + cmd_offset[i]);
+ ap->ioaddr.bmdma_addr = mmio_base + bmdma_offset[i];
+
+ ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio");
+ ata_port_pbar_desc(ap, PDC_MMIO_BAR, cmd_offset[i], "cmd");
+ }
+
+ //pci_enable_intx(pdev);
+
+ /* initialize adapter */
+ pdc_hardware_init(host, board_idx);
+
+ pci_set_master(pdev);
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
+ IRQF_SHARED, &pdc2027x_sht);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pdc2027x_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = pci_get_drvdata(pdev);
+ unsigned int board_idx;
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ if (pdev->device == PCI_DEVICE_ID_PROMISE_20268 ||
+ pdev->device == PCI_DEVICE_ID_PROMISE_20270)
+ board_idx = PDC_UDMA_100;
+ else
+ board_idx = PDC_UDMA_133;
+
+ pdc_hardware_init(host, board_idx);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
+module_pci_driver(pdc2027x_pci_driver);