summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_pdc202xx_old.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_pdc202xx_old.c')
-rw-r--r--drivers/ata/pata_pdc202xx_old.c391
1 files changed, 391 insertions, 0 deletions
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
new file mode 100644
index 0000000000..a32723e463
--- /dev/null
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -0,0 +1,391 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer
+ * (C) 2005 Red Hat Inc
+ * Alan Cox <alan@lxorguk.ukuu.org.uk>
+ * (C) 2007,2009,2010 Bartlomiej Zolnierkiewicz
+ *
+ * Based in part on linux/drivers/ide/pci/pdc202xx_old.c
+ *
+ * First cut with LBA48/ATAPI
+ *
+ * TODO:
+ * Channel interlock/reset on both required ?
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_pdc202xx_old"
+#define DRV_VERSION "0.4.3"
+
+static int pdc2026x_cable_detect(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u16 cis;
+
+ pci_read_config_word(pdev, 0x50, &cis);
+ if (cis & (1 << (10 + ap->port_no)))
+ return ATA_CBL_PATA40;
+ return ATA_CBL_PATA80;
+}
+
+static void pdc202xx_exec_command(struct ata_port *ap,
+ const struct ata_taskfile *tf)
+{
+ iowrite8(tf->command, ap->ioaddr.command_addr);
+ ndelay(400);
+}
+
+static bool pdc202xx_irq_check(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ unsigned long master = pci_resource_start(pdev, 4);
+ u8 sc1d = inb(master + 0x1d);
+
+ if (ap->port_no) {
+ /*
+ * bit 7: error, bit 6: interrupting,
+ * bit 5: FIFO full, bit 4: FIFO empty
+ */
+ return sc1d & 0x40;
+ } else {
+ /*
+ * bit 3: error, bit 2: interrupting,
+ * bit 1: FIFO full, bit 0: FIFO empty
+ */
+ return sc1d & 0x04;
+ }
+}
+
+/**
+ * pdc202xx_configure_piomode - set chip PIO timing
+ * @ap: ATA interface
+ * @adev: ATA device
+ * @pio: PIO mode
+ *
+ * Called to do the PIO mode setup. Our timing registers are shared
+ * so a configure_dmamode call will undo any work we do here and vice
+ * versa
+ */
+
+static void pdc202xx_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int port = 0x60 + 8 * ap->port_no + 4 * adev->devno;
+ static const u16 pio_timing[5] = {
+ 0x0913, 0x050C , 0x0308, 0x0206, 0x0104
+ };
+ u8 r_ap, r_bp;
+
+ pci_read_config_byte(pdev, port, &r_ap);
+ pci_read_config_byte(pdev, port + 1, &r_bp);
+ r_ap &= ~0x3F; /* Preserve ERRDY_EN, SYNC_IN */
+ r_bp &= ~0x1F;
+ r_ap |= (pio_timing[pio] >> 8);
+ r_bp |= (pio_timing[pio] & 0xFF);
+
+ if (ata_pio_need_iordy(adev))
+ r_ap |= 0x20; /* IORDY enable */
+ if (adev->class == ATA_DEV_ATA)
+ r_ap |= 0x10; /* FIFO enable */
+ pci_write_config_byte(pdev, port, r_ap);
+ pci_write_config_byte(pdev, port + 1, r_bp);
+}
+
+/**
+ * pdc202xx_set_piomode - set initial PIO mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Called to do the PIO mode setup. Our timing registers are shared
+ * but we want to set the PIO timing by default.
+ */
+
+static void pdc202xx_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ pdc202xx_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0);
+}
+
+/**
+ * pdc202xx_set_dmamode - set DMA mode in chip
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Load DMA cycle times into the chip ready for a DMA transfer
+ * to occur.
+ */
+
+static void pdc202xx_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int port = 0x60 + 8 * ap->port_no + 4 * adev->devno;
+ static u8 udma_timing[6][2] = {
+ { 0x60, 0x03 }, /* 33 Mhz Clock */
+ { 0x40, 0x02 },
+ { 0x20, 0x01 },
+ { 0x40, 0x02 }, /* 66 Mhz Clock */
+ { 0x20, 0x01 },
+ { 0x20, 0x01 }
+ };
+ static u8 mdma_timing[3][2] = {
+ { 0xe0, 0x0f },
+ { 0x60, 0x04 },
+ { 0x60, 0x03 },
+ };
+ u8 r_bp, r_cp;
+
+ pci_read_config_byte(pdev, port + 1, &r_bp);
+ pci_read_config_byte(pdev, port + 2, &r_cp);
+
+ r_bp &= ~0xE0;
+ r_cp &= ~0x0F;
+
+ if (adev->dma_mode >= XFER_UDMA_0) {
+ int speed = adev->dma_mode - XFER_UDMA_0;
+ r_bp |= udma_timing[speed][0];
+ r_cp |= udma_timing[speed][1];
+
+ } else {
+ int speed = adev->dma_mode - XFER_MW_DMA_0;
+ r_bp |= mdma_timing[speed][0];
+ r_cp |= mdma_timing[speed][1];
+ }
+ pci_write_config_byte(pdev, port + 1, r_bp);
+ pci_write_config_byte(pdev, port + 2, r_cp);
+
+}
+
+/**
+ * pdc2026x_bmdma_start - DMA engine begin
+ * @qc: ATA command
+ *
+ * In UDMA3 or higher we have to clock switch for the duration of the
+ * DMA transfer sequence.
+ *
+ * Note: The host lock held by the libata layer protects
+ * us from two channels both trying to set DMA bits at once
+ */
+
+static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_device *adev = qc->dev;
+ struct ata_taskfile *tf = &qc->tf;
+ int sel66 = ap->port_no ? 0x08: 0x02;
+
+ void __iomem *master = ap->host->ports[0]->ioaddr.bmdma_addr;
+ void __iomem *clock = master + 0x11;
+ void __iomem *atapi_reg = master + 0x20 + (4 * ap->port_no);
+
+ u32 len;
+
+ /* Check we keep host level locking here */
+ if (adev->dma_mode > XFER_UDMA_2)
+ iowrite8(ioread8(clock) | sel66, clock);
+ else
+ iowrite8(ioread8(clock) & ~sel66, clock);
+
+ /* The DMA clocks may have been trashed by a reset. FIXME: make conditional
+ and move to qc_issue ? */
+ pdc202xx_set_dmamode(ap, qc->dev);
+
+ /* Cases the state machine will not complete correctly without help */
+ if ((tf->flags & ATA_TFLAG_LBA48) || tf->protocol == ATAPI_PROT_DMA) {
+ len = qc->nbytes / 2;
+
+ if (tf->flags & ATA_TFLAG_WRITE)
+ len |= 0x06000000;
+ else
+ len |= 0x05000000;
+
+ iowrite32(len, atapi_reg);
+ }
+
+ /* Activate DMA */
+ ata_bmdma_start(qc);
+}
+
+/**
+ * pdc2026x_bmdma_stop - DMA engine stop
+ * @qc: ATA command
+ *
+ * After a DMA completes we need to put the clock back to 33MHz for
+ * PIO timings.
+ *
+ * Note: The host lock held by the libata layer protects
+ * us from two channels both trying to set DMA bits at once
+ */
+
+static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_device *adev = qc->dev;
+ struct ata_taskfile *tf = &qc->tf;
+
+ int sel66 = ap->port_no ? 0x08: 0x02;
+ /* The clock bits are in the same register for both channels */
+ void __iomem *master = ap->host->ports[0]->ioaddr.bmdma_addr;
+ void __iomem *clock = master + 0x11;
+ void __iomem *atapi_reg = master + 0x20 + (4 * ap->port_no);
+
+ /* Cases the state machine will not complete correctly */
+ if (tf->protocol == ATAPI_PROT_DMA || (tf->flags & ATA_TFLAG_LBA48)) {
+ iowrite32(0, atapi_reg);
+ iowrite8(ioread8(clock) & ~sel66, clock);
+ }
+ /* Flip back to 33Mhz for PIO */
+ if (adev->dma_mode > XFER_UDMA_2)
+ iowrite8(ioread8(clock) & ~sel66, clock);
+ ata_bmdma_stop(qc);
+ pdc202xx_set_piomode(ap, adev);
+}
+
+/**
+ * pdc2026x_dev_config - device setup hook
+ * @adev: newly found device
+ *
+ * Perform chip specific early setup. We need to lock the transfer
+ * sizes to 8bit to avoid making the state engine on the 2026x cards
+ * barf.
+ */
+
+static void pdc2026x_dev_config(struct ata_device *adev)
+{
+ adev->max_sectors = 256;
+}
+
+static int pdc2026x_port_start(struct ata_port *ap)
+{
+ void __iomem *bmdma = ap->ioaddr.bmdma_addr;
+ if (bmdma) {
+ /* Enable burst mode */
+ u8 burst = ioread8(bmdma + 0x1f);
+ iowrite8(burst | 0x01, bmdma + 0x1f);
+ }
+ return ata_bmdma_port_start(ap);
+}
+
+/**
+ * pdc2026x_check_atapi_dma - Check whether ATAPI DMA can be supported for this command
+ * @qc: Metadata associated with taskfile to check
+ *
+ * Just say no - not supported on older Promise.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ *
+ * RETURNS: 0 when ATAPI DMA can be used
+ * 1 otherwise
+ */
+
+static int pdc2026x_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ return 1;
+}
+
+static const struct scsi_host_template pdc202xx_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations pdc2024x_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+
+ .cable_detect = ata_cable_40wire,
+ .set_piomode = pdc202xx_set_piomode,
+ .set_dmamode = pdc202xx_set_dmamode,
+
+ .sff_exec_command = pdc202xx_exec_command,
+ .sff_irq_check = pdc202xx_irq_check,
+};
+
+static struct ata_port_operations pdc2026x_port_ops = {
+ .inherits = &pdc2024x_port_ops,
+
+ .check_atapi_dma = pdc2026x_check_atapi_dma,
+ .bmdma_start = pdc2026x_bmdma_start,
+ .bmdma_stop = pdc2026x_bmdma_stop,
+
+ .cable_detect = pdc2026x_cable_detect,
+ .dev_config = pdc2026x_dev_config,
+
+ .port_start = pdc2026x_port_start,
+
+ .sff_exec_command = pdc202xx_exec_command,
+ .sff_irq_check = pdc202xx_irq_check,
+};
+
+static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ static const struct ata_port_info info[3] = {
+ {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA2,
+ .port_ops = &pdc2024x_port_ops
+ },
+ {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA4,
+ .port_ops = &pdc2026x_port_ops
+ },
+ {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA5,
+ .port_ops = &pdc2026x_port_ops
+ }
+
+ };
+ const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL };
+
+ if (dev->device == PCI_DEVICE_ID_PROMISE_20265) {
+ struct pci_dev *bridge = dev->bus->self;
+ /* Don't grab anything behind a Promise I2O RAID */
+ if (bridge && bridge->vendor == PCI_VENDOR_ID_INTEL) {
+ if (bridge->device == PCI_DEVICE_ID_INTEL_I960)
+ return -ENODEV;
+ if (bridge->device == PCI_DEVICE_ID_INTEL_I960RM)
+ return -ENODEV;
+ }
+ }
+ return ata_pci_bmdma_init_one(dev, ppi, &pdc202xx_sht, NULL, 0);
+}
+
+static const struct pci_device_id pdc202xx[] = {
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20246), 0 },
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20262), 1 },
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20263), 1 },
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20265), 2 },
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20267), 2 },
+
+ { },
+};
+
+static struct pci_driver pdc202xx_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = pdc202xx,
+ .probe = pdc202xx_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
+#endif
+};
+
+module_pci_driver(pdc202xx_pci_driver);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for Promise 2024x and 20262-20267");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, pdc202xx);
+MODULE_VERSION(DRV_VERSION);