summaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth/hci_ath.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/bluetooth/hci_ath.c')
-rw-r--r--drivers/bluetooth/hci_ath.c268
1 files changed, 268 insertions, 0 deletions
diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c
new file mode 100644
index 000000000..dbfe34664
--- /dev/null
+++ b/drivers/bluetooth/hci_ath.c
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Atheros Communication Bluetooth HCIATH3K UART protocol
+ *
+ * HCIATH3K (HCI Atheros AR300x Protocol) is a Atheros Communication's
+ * power management protocol extension to H4 to support AR300x Bluetooth Chip.
+ *
+ * Copyright (c) 2009-2010 Atheros Communications Inc.
+ *
+ * Acknowledgements:
+ * This file is based on hci_h4.c, which was written
+ * by Maxim Krasnyansky and Marcel Holtmann.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/errno.h>
+#include <linux/ioctl.h>
+#include <linux/skbuff.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+
+struct ath_struct {
+ struct hci_uart *hu;
+ unsigned int cur_sleep;
+
+ struct sk_buff *rx_skb;
+ struct sk_buff_head txq;
+ struct work_struct ctxtsw;
+};
+
+#define OP_WRITE_TAG 0x01
+
+#define INDEX_BDADDR 0x01
+
+struct ath_vendor_cmd {
+ __u8 opcode;
+ __le16 index;
+ __u8 len;
+ __u8 data[251];
+} __packed;
+
+static int ath_wakeup_ar3k(struct tty_struct *tty)
+{
+ int status = tty->driver->ops->tiocmget(tty);
+
+ if (status & TIOCM_CTS)
+ return status;
+
+ /* Clear RTS first */
+ tty->driver->ops->tiocmget(tty);
+ tty->driver->ops->tiocmset(tty, 0x00, TIOCM_RTS);
+ msleep(20);
+
+ /* Set RTS, wake up board */
+ tty->driver->ops->tiocmget(tty);
+ tty->driver->ops->tiocmset(tty, TIOCM_RTS, 0x00);
+ msleep(20);
+
+ status = tty->driver->ops->tiocmget(tty);
+ return status;
+}
+
+static void ath_hci_uart_work(struct work_struct *work)
+{
+ int status;
+ struct ath_struct *ath;
+ struct hci_uart *hu;
+ struct tty_struct *tty;
+
+ ath = container_of(work, struct ath_struct, ctxtsw);
+
+ hu = ath->hu;
+ tty = hu->tty;
+
+ /* verify and wake up controller */
+ if (ath->cur_sleep) {
+ status = ath_wakeup_ar3k(tty);
+ if (!(status & TIOCM_CTS))
+ return;
+ }
+
+ /* Ready to send Data */
+ clear_bit(HCI_UART_SENDING, &hu->tx_state);
+ hci_uart_tx_wakeup(hu);
+}
+
+static int ath_open(struct hci_uart *hu)
+{
+ struct ath_struct *ath;
+
+ BT_DBG("hu %p", hu);
+
+ if (!hci_uart_has_flow_control(hu))
+ return -EOPNOTSUPP;
+
+ ath = kzalloc(sizeof(*ath), GFP_KERNEL);
+ if (!ath)
+ return -ENOMEM;
+
+ skb_queue_head_init(&ath->txq);
+
+ hu->priv = ath;
+ ath->hu = hu;
+
+ INIT_WORK(&ath->ctxtsw, ath_hci_uart_work);
+
+ return 0;
+}
+
+static int ath_close(struct hci_uart *hu)
+{
+ struct ath_struct *ath = hu->priv;
+
+ BT_DBG("hu %p", hu);
+
+ skb_queue_purge(&ath->txq);
+
+ kfree_skb(ath->rx_skb);
+
+ cancel_work_sync(&ath->ctxtsw);
+
+ hu->priv = NULL;
+ kfree(ath);
+
+ return 0;
+}
+
+static int ath_flush(struct hci_uart *hu)
+{
+ struct ath_struct *ath = hu->priv;
+
+ BT_DBG("hu %p", hu);
+
+ skb_queue_purge(&ath->txq);
+
+ return 0;
+}
+
+static int ath_vendor_cmd(struct hci_dev *hdev, uint8_t opcode, uint16_t index,
+ const void *data, size_t dlen)
+{
+ struct sk_buff *skb;
+ struct ath_vendor_cmd cmd;
+
+ if (dlen > sizeof(cmd.data))
+ return -EINVAL;
+
+ cmd.opcode = opcode;
+ cmd.index = cpu_to_le16(index);
+ cmd.len = dlen;
+ memcpy(cmd.data, data, dlen);
+
+ skb = __hci_cmd_sync(hdev, 0xfc0b, dlen + 4, &cmd, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+ kfree_skb(skb);
+
+ return 0;
+}
+
+static int ath_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ return ath_vendor_cmd(hdev, OP_WRITE_TAG, INDEX_BDADDR, bdaddr,
+ sizeof(*bdaddr));
+}
+
+static int ath_setup(struct hci_uart *hu)
+{
+ BT_DBG("hu %p", hu);
+
+ hu->hdev->set_bdaddr = ath_set_bdaddr;
+
+ return 0;
+}
+
+static const struct h4_recv_pkt ath_recv_pkts[] = {
+ { H4_RECV_ACL, .recv = hci_recv_frame },
+ { H4_RECV_SCO, .recv = hci_recv_frame },
+ { H4_RECV_EVENT, .recv = hci_recv_frame },
+};
+
+static int ath_recv(struct hci_uart *hu, const void *data, int count)
+{
+ struct ath_struct *ath = hu->priv;
+
+ ath->rx_skb = h4_recv_buf(hu->hdev, ath->rx_skb, data, count,
+ ath_recv_pkts, ARRAY_SIZE(ath_recv_pkts));
+ if (IS_ERR(ath->rx_skb)) {
+ int err = PTR_ERR(ath->rx_skb);
+ bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
+ ath->rx_skb = NULL;
+ return err;
+ }
+
+ return count;
+}
+
+#define HCI_OP_ATH_SLEEP 0xFC04
+
+static int ath_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+ struct ath_struct *ath = hu->priv;
+
+ if (hci_skb_pkt_type(skb) == HCI_SCODATA_PKT) {
+ kfree_skb(skb);
+ return 0;
+ }
+
+ /* Update power management enable flag with parameters of
+ * HCI sleep enable vendor specific HCI command.
+ */
+ if (hci_skb_pkt_type(skb) == HCI_COMMAND_PKT) {
+ struct hci_command_hdr *hdr = (void *)skb->data;
+
+ if (__le16_to_cpu(hdr->opcode) == HCI_OP_ATH_SLEEP)
+ ath->cur_sleep = skb->data[HCI_COMMAND_HDR_SIZE];
+ }
+
+ BT_DBG("hu %p skb %p", hu, skb);
+
+ /* Prepend skb with frame type */
+ memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+
+ skb_queue_tail(&ath->txq, skb);
+ set_bit(HCI_UART_SENDING, &hu->tx_state);
+
+ schedule_work(&ath->ctxtsw);
+
+ return 0;
+}
+
+static struct sk_buff *ath_dequeue(struct hci_uart *hu)
+{
+ struct ath_struct *ath = hu->priv;
+
+ return skb_dequeue(&ath->txq);
+}
+
+static const struct hci_uart_proto athp = {
+ .id = HCI_UART_ATH3K,
+ .name = "ATH3K",
+ .manufacturer = 69,
+ .open = ath_open,
+ .close = ath_close,
+ .flush = ath_flush,
+ .setup = ath_setup,
+ .recv = ath_recv,
+ .enqueue = ath_enqueue,
+ .dequeue = ath_dequeue,
+};
+
+int __init ath_init(void)
+{
+ return hci_uart_register_proto(&athp);
+}
+
+int __exit ath_deinit(void)
+{
+ return hci_uart_unregister_proto(&athp);
+}