diff options
Diffstat (limited to 'drivers/bluetooth/hci_bcm.c')
| -rw-r--r-- | drivers/bluetooth/hci_bcm.c | 1645 |
1 files changed, 1645 insertions, 0 deletions
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c new file mode 100644 index 0000000000..874d23089b --- /dev/null +++ b/drivers/bluetooth/hci_bcm.c @@ -0,0 +1,1645 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * + * Bluetooth HCI UART driver for Broadcom devices + * + * Copyright (C) 2015 Intel Corporation + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/skbuff.h> +#include <linux/firmware.h> +#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/property.h> +#include <linux/platform_data/x86/apple.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/clk.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/machine.h> +#include <linux/tty.h> +#include <linux/interrupt.h> +#include <linux/dmi.h> +#include <linux/pm_runtime.h> +#include <linux/serdev.h> + +#include <net/bluetooth/bluetooth.h> +#include <net/bluetooth/hci_core.h> + +#include "btbcm.h" +#include "hci_uart.h" + +#define BCM_NULL_PKT 0x00 +#define BCM_NULL_SIZE 0 + +#define BCM_LM_DIAG_PKT 0x07 +#define BCM_LM_DIAG_SIZE 63 + +#define BCM_TYPE49_PKT 0x31 +#define BCM_TYPE49_SIZE 0 + +#define BCM_TYPE52_PKT 0x34 +#define BCM_TYPE52_SIZE 0 + +#define BCM_AUTOSUSPEND_DELAY 5000 /* default autosleep delay */ + +#define BCM_NUM_SUPPLIES 2 + +/** + * struct bcm_device_data - device specific data + * @no_early_set_baudrate: Disallow set baudrate before driver setup() + * @drive_rts_on_open: drive RTS signal on ->open() when platform requires it + * @no_uart_clock_set: UART clock set command for >3Mbps mode is unavailable + * @max_autobaud_speed: max baudrate supported by device in autobaud mode + * @max_speed: max baudrate supported + */ +struct bcm_device_data { + bool no_early_set_baudrate; + bool drive_rts_on_open; + bool no_uart_clock_set; + u32 max_autobaud_speed; + u32 max_speed; +}; + +/** + * struct bcm_device - device driver resources + * @serdev_hu: HCI UART controller struct + * @list: bcm_device_list node + * @dev: physical UART slave + * @name: device name logged by bt_dev_*() functions + * @device_wakeup: BT_WAKE pin, + * assert = Bluetooth device must wake up or remain awake, + * deassert = Bluetooth device may sleep when sleep criteria are met + * @shutdown: BT_REG_ON pin, + * power up or power down Bluetooth device internal regulators + * @reset: BT_RST_N pin, + * active low resets the Bluetooth logic core + * @set_device_wakeup: callback to toggle BT_WAKE pin + * either by accessing @device_wakeup or by calling @btlp + * @set_shutdown: callback to toggle BT_REG_ON pin + * either by accessing @shutdown or by calling @btpu/@btpd + * @btlp: Apple ACPI method to toggle BT_WAKE pin ("Bluetooth Low Power") + * @btpu: Apple ACPI method to drive BT_REG_ON pin high ("Bluetooth Power Up") + * @btpd: Apple ACPI method to drive BT_REG_ON pin low ("Bluetooth Power Down") + * @gpio_count: internal counter for GPIO resources associated with ACPI device + * @gpio_int_idx: index in _CRS for GpioInt() resource + * @txco_clk: external reference frequency clock used by Bluetooth device + * @lpo_clk: external LPO clock used by Bluetooth device + * @supplies: VBAT and VDDIO supplies used by Bluetooth device + * @res_enabled: whether clocks and supplies are prepared and enabled + * @init_speed: default baudrate of Bluetooth device; + * the host UART is initially set to this baudrate so that + * it can configure the Bluetooth device for @oper_speed + * @oper_speed: preferred baudrate of Bluetooth device; + * set to 0 if @init_speed is already the preferred baudrate + * @irq: interrupt triggered by HOST_WAKE_BT pin + * @irq_active_low: whether @irq is active low + * @irq_acquired: flag to show if IRQ handler has been assigned + * @hu: pointer to HCI UART controller struct, + * used to disable flow control during runtime suspend and system sleep + * @is_suspended: whether flow control is currently disabled + * @no_early_set_baudrate: don't set_baudrate before setup() + * @drive_rts_on_open: drive RTS signal on ->open() when platform requires it + * @no_uart_clock_set: UART clock set command for >3Mbps mode is unavailable + * @pcm_int_params: keep the initial PCM configuration + * @use_autobaud_mode: start Bluetooth device in autobaud mode + * @max_autobaud_speed: max baudrate supported by device in autobaud mode + */ +struct bcm_device { + /* Must be the first member, hci_serdev.c expects this. */ + struct hci_uart serdev_hu; + struct list_head list; + + struct device *dev; + + const char *name; + struct gpio_desc *device_wakeup; + struct gpio_desc *shutdown; + struct gpio_desc *reset; + int (*set_device_wakeup)(struct bcm_device *, bool); + int (*set_shutdown)(struct bcm_device *, bool); +#ifdef CONFIG_ACPI + acpi_handle btlp, btpu, btpd; + int gpio_count; + int gpio_int_idx; +#endif + + struct clk *txco_clk; + struct clk *lpo_clk; + struct regulator_bulk_data supplies[BCM_NUM_SUPPLIES]; + bool res_enabled; + + u32 init_speed; + u32 oper_speed; + int irq; + bool irq_active_low; + bool irq_acquired; + +#ifdef CONFIG_PM + struct hci_uart *hu; + bool is_suspended; +#endif + bool no_early_set_baudrate; + bool drive_rts_on_open; + bool no_uart_clock_set; + bool use_autobaud_mode; + u8 pcm_int_params[5]; + u32 max_autobaud_speed; +}; + +/* generic bcm uart resources */ +struct bcm_data { + struct sk_buff *rx_skb; + struct sk_buff_head txq; + + struct bcm_device *dev; +}; + +/* List of BCM BT UART devices */ +static DEFINE_MUTEX(bcm_device_lock); +static LIST_HEAD(bcm_device_list); + +static int irq_polarity = -1; +module_param(irq_polarity, int, 0444); +MODULE_PARM_DESC(irq_polarity, "IRQ polarity 0: active-high 1: active-low"); + +static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed) +{ + if (hu->serdev) + serdev_device_set_baudrate(hu->serdev, speed); + else + hci_uart_set_baudrate(hu, speed); +} + +static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed) +{ + struct hci_dev *hdev = hu->hdev; + struct bcm_data *bcm = hu->priv; + struct sk_buff *skb; + struct bcm_update_uart_baud_rate param; + + if (speed > 3000000 && !bcm->dev->no_uart_clock_set) { + struct bcm_write_uart_clock_setting clock; + + clock.type = BCM_UART_CLOCK_48MHZ; + + bt_dev_dbg(hdev, "Set Controller clock (%d)", clock.type); + + /* This Broadcom specific command changes the UART's controller + * clock for baud rate > 3000000. + */ + skb = __hci_cmd_sync(hdev, 0xfc45, 1, &clock, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + int err = PTR_ERR(skb); + bt_dev_err(hdev, "BCM: failed to write clock (%d)", + err); + return err; + } + + kfree_skb(skb); + } + + bt_dev_dbg(hdev, "Set Controller UART speed to %d bit/s", speed); + + param.zero = cpu_to_le16(0); + param.baud_rate = cpu_to_le32(speed); + + /* This Broadcom specific command changes the UART's controller baud + * rate. + */ + skb = __hci_cmd_sync(hdev, 0xfc18, sizeof(param), ¶m, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + int err = PTR_ERR(skb); + bt_dev_err(hdev, "BCM: failed to write update baudrate (%d)", + err); + return err; + } + + kfree_skb(skb); + + return 0; +} + +/* bcm_device_exists should be protected by bcm_device_lock */ +static bool bcm_device_exists(struct bcm_device *device) +{ + struct list_head *p; + +#ifdef CONFIG_PM + /* Devices using serdev always exist */ + if (device && device->hu && device->hu->serdev) + return true; +#endif + + list_for_each(p, &bcm_device_list) { + struct bcm_device *dev = list_entry(p, struct bcm_device, list); + + if (device == dev) + return true; + } + + return false; +} + +static int bcm_gpio_set_power(struct bcm_device *dev, bool powered) +{ + int err; + + if (powered && !dev->res_enabled) { + /* Intel Macs use bcm_apple_get_resources() and don't + * have regulator supplies configured. + */ + if (dev->supplies[0].supply) { + err = regulator_bulk_enable(BCM_NUM_SUPPLIES, + dev->supplies); + if (err) + return err; + } + + /* LPO clock needs to be 32.768 kHz */ + err = clk_set_rate(dev->lpo_clk, 32768); + if (err) { + dev_err(dev->dev, "Could not set LPO clock rate\n"); + goto err_regulator_disable; + } + + err = clk_prepare_enable(dev->lpo_clk); + if (err) + goto err_regulator_disable; + + err = clk_prepare_enable(dev->txco_clk); + if (err) + goto err_lpo_clk_disable; + } + + err = dev->set_shutdown(dev, powered); + if (err) + goto err_txco_clk_disable; + + err = dev->set_device_wakeup(dev, powered); + if (err) + goto err_revert_shutdown; + + if (!powered && dev->res_enabled) { + clk_disable_unprepare(dev->txco_clk); + clk_disable_unprepare(dev->lpo_clk); + + /* Intel Macs use bcm_apple_get_resources() and don't + * have regulator supplies configured. + */ + if (dev->supplies[0].supply) + regulator_bulk_disable(BCM_NUM_SUPPLIES, + dev->supplies); + } + + /* wait for device to power on and come out of reset */ + usleep_range(100000, 120000); + + dev->res_enabled = powered; + + return 0; + +err_revert_shutdown: + dev->set_shutdown(dev, !powered); +err_txco_clk_disable: + if (powered && !dev->res_enabled) + clk_disable_unprepare(dev->txco_clk); +err_lpo_clk_disable: + if (powered && !dev->res_enabled) + clk_disable_unprepare(dev->lpo_clk); +err_regulator_disable: + if (powered && !dev->res_enabled) + regulator_bulk_disable(BCM_NUM_SUPPLIES, dev->supplies); + return err; +} + +#ifdef CONFIG_PM +static irqreturn_t bcm_host_wake(int irq, void *data) +{ + struct bcm_device *bdev = data; + + bt_dev_dbg(bdev, "Host wake IRQ"); + + pm_runtime_get(bdev->dev); + pm_runtime_mark_last_busy(bdev->dev); + pm_runtime_put_autosuspend(bdev->dev); + + return IRQ_HANDLED; +} + +static int bcm_request_irq(struct bcm_data *bcm) +{ + struct bcm_device *bdev = bcm->dev; + int err; + + mutex_lock(&bcm_device_lock); + if (!bcm_device_exists(bdev)) { + err = -ENODEV; + goto unlock; + } + + if (bdev->irq <= 0) { + err = -EOPNOTSUPP; + goto unlock; + } + + err = devm_request_irq(bdev->dev, bdev->irq, bcm_host_wake, + bdev->irq_active_low ? IRQF_TRIGGER_FALLING : + IRQF_TRIGGER_RISING, + "host_wake", bdev); + if (err) { + bdev->irq = err; + goto unlock; + } + + bdev->irq_acquired = true; + + device_init_wakeup(bdev->dev, true); + + pm_runtime_set_autosuspend_delay(bdev->dev, + BCM_AUTOSUSPEND_DELAY); + pm_runtime_use_autosuspend(bdev->dev); + pm_runtime_set_active(bdev->dev); + pm_runtime_enable(bdev->dev); + +unlock: + mutex_unlock(&bcm_device_lock); + + return err; +} + +static const struct bcm_set_sleep_mode default_sleep_params = { + .sleep_mode = 1, /* 0=Disabled, 1=UART, 2=Reserved, 3=USB */ + .idle_host = 2, /* idle threshold HOST, in 300ms */ + .idle_dev = 2, /* idle threshold device, in 300ms */ + .bt_wake_active = 1, /* BT_WAKE active mode: 1 = high, 0 = low */ + .host_wake_active = 0, /* HOST_WAKE active mode: 1 = high, 0 = low */ + .allow_host_sleep = 1, /* Allow host sleep in SCO flag */ + .combine_modes = 1, /* Combine sleep and LPM flag */ + .tristate_control = 0, /* Allow tri-state control of UART tx flag */ + /* Irrelevant USB flags */ + .usb_auto_sleep = 0, + .usb_resume_timeout = 0, + .break_to_host = 0, + .pulsed_host_wake = 1, +}; + +static int bcm_setup_sleep(struct hci_uart *hu) +{ + struct bcm_data *bcm = hu->priv; + struct sk_buff *skb; + struct bcm_set_sleep_mode sleep_params = default_sleep_params; + + sleep_params.host_wake_active = !bcm->dev->irq_active_low; + + skb = __hci_cmd_sync(hu->hdev, 0xfc27, sizeof(sleep_params), + &sleep_params, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + int err = PTR_ERR(skb); + bt_dev_err(hu->hdev, "Sleep VSC failed (%d)", err); + return err; + } + kfree_skb(skb); + + bt_dev_dbg(hu->hdev, "Set Sleep Parameters VSC succeeded"); + + return 0; +} +#else +static inline int bcm_request_irq(struct bcm_data *bcm) { return 0; } +static inline int bcm_setup_sleep(struct hci_uart *hu) { return 0; } +#endif + +static int bcm_set_diag(struct hci_dev *hdev, bool enable) +{ + struct hci_uart *hu = hci_get_drvdata(hdev); + struct bcm_data *bcm = hu->priv; + struct sk_buff *skb; + + if (!test_bit(HCI_RUNNING, &hdev->flags)) + return -ENETDOWN; + + skb = bt_skb_alloc(3, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + skb_put_u8(skb, BCM_LM_DIAG_PKT); + skb_put_u8(skb, 0xf0); + skb_put_u8(skb, enable); + + skb_queue_tail(&bcm->txq, skb); + hci_uart_tx_wakeup(hu); + + return 0; +} + +static int bcm_open(struct hci_uart *hu) +{ + struct bcm_data *bcm; + struct list_head *p; + int err; + + bt_dev_dbg(hu->hdev, "hu %p", hu); + + if (!hci_uart_has_flow_control(hu)) + return -EOPNOTSUPP; + + bcm = kzalloc(sizeof(*bcm), GFP_KERNEL); + if (!bcm) + return -ENOMEM; + + skb_queue_head_init(&bcm->txq); + + hu->priv = bcm; + + mutex_lock(&bcm_device_lock); + + if (hu->serdev) { + bcm->dev = serdev_device_get_drvdata(hu->serdev); + goto out; + } + + if (!hu->tty->dev) + goto out; + + list_for_each(p, &bcm_device_list) { + struct bcm_device *dev = list_entry(p, struct bcm_device, list); + + /* Retrieve saved bcm_device based on parent of the + * platform device (saved during device probe) and + * parent of tty device used by hci_uart + */ + if (hu->tty->dev->parent == dev->dev->parent) { + bcm->dev = dev; +#ifdef CONFIG_PM + dev->hu = hu; +#endif + break; + } + } + +out: + if (bcm->dev) { + if (bcm->dev->use_autobaud_mode) + hci_uart_set_flow_control(hu, false); /* Assert BT_UART_CTS_N */ + else if (bcm->dev->drive_rts_on_open) + hci_uart_set_flow_control(hu, true); + + if (bcm->dev->use_autobaud_mode && bcm->dev->max_autobaud_speed) + hu->init_speed = min(bcm->dev->oper_speed, bcm->dev->max_autobaud_speed); + else + hu->init_speed = bcm->dev->init_speed; + + /* If oper_speed is set, ldisc/serdev will set the baudrate + * before calling setup() + */ + if (!bcm->dev->no_early_set_baudrate && !bcm->dev->use_autobaud_mode) + hu->oper_speed = bcm->dev->oper_speed; + + err = bcm_gpio_set_power(bcm->dev, true); + + if (bcm->dev->drive_rts_on_open) + hci_uart_set_flow_control(hu, false); + + if (err) + goto err_unset_hu; + } + + mutex_unlock(&bcm_device_lock); + return 0; + +err_unset_hu: +#ifdef CONFIG_PM + if (!hu->serdev) + bcm->dev->hu = NULL; +#endif + mutex_unlock(&bcm_device_lock); + hu->priv = NULL; + kfree(bcm); + return err; +} + +static int bcm_close(struct hci_uart *hu) +{ + struct bcm_data *bcm = hu->priv; + struct bcm_device *bdev = NULL; + int err; + + bt_dev_dbg(hu->hdev, "hu %p", hu); + + /* Protect bcm->dev against removal of the device or driver */ + mutex_lock(&bcm_device_lock); + + if (hu->serdev) { + bdev = serdev_device_get_drvdata(hu->serdev); + } else if (bcm_device_exists(bcm->dev)) { + bdev = bcm->dev; +#ifdef CONFIG_PM + bdev->hu = NULL; +#endif + } + + if (bdev) { + if (IS_ENABLED(CONFIG_PM) && bdev->irq_acquired) { + devm_free_irq(bdev->dev, bdev->irq, bdev); + device_init_wakeup(bdev->dev, false); + pm_runtime_disable(bdev->dev); + } + + err = bcm_gpio_set_power(bdev, false); + if (err) + bt_dev_err(hu->hdev, "Failed to power down"); + else + pm_runtime_set_suspended(bdev->dev); + } + mutex_unlock(&bcm_device_lock); + + skb_queue_purge(&bcm->txq); + kfree_skb(bcm->rx_skb); + kfree(bcm); + + hu->priv = NULL; + return 0; +} + +static int bcm_flush(struct hci_uart *hu) +{ + struct bcm_data *bcm = hu->priv; + + bt_dev_dbg(hu->hdev, "hu %p", hu); + + skb_queue_purge(&bcm->txq); + + return 0; +} + +static int bcm_setup(struct hci_uart *hu) +{ + struct bcm_data *bcm = hu->priv; + bool fw_load_done = false; + bool use_autobaud_mode = (bcm->dev ? bcm->dev->use_autobaud_mode : 0); + unsigned int speed; + int err; + + bt_dev_dbg(hu->hdev, "hu %p", hu); + + hu->hdev->set_diag = bcm_set_diag; + hu->hdev->set_bdaddr = btbcm_set_bdaddr; + + err = btbcm_initialize(hu->hdev, &fw_load_done, use_autobaud_mode); + if (err) + return err; + + if (!fw_load_done) + return 0; + + /* Init speed if any */ + if (bcm->dev && bcm->dev->init_speed) + speed = bcm->dev->init_speed; + else if (hu->proto->init_speed) + speed = hu->proto->init_speed; + else + speed = 0; + + if (speed) + host_set_baudrate(hu, speed); + + /* Operational speed if any */ + if (hu->oper_speed) + speed = hu->oper_speed; + else if (bcm->dev && bcm->dev->oper_speed) + speed = bcm->dev->oper_speed; + else if (hu->proto->oper_speed) + speed = hu->proto->oper_speed; + else + speed = 0; + + if (speed) { + err = bcm_set_baudrate(hu, speed); + if (!err) + host_set_baudrate(hu, speed); + } + + /* PCM parameters if provided */ + if (bcm->dev && bcm->dev->pcm_int_params[0] != 0xff) { + struct bcm_set_pcm_int_params params; + + btbcm_read_pcm_int_params(hu->hdev, ¶ms); + + memcpy(¶ms, bcm->dev->pcm_int_params, 5); + btbcm_write_pcm_int_params(hu->hdev, ¶ms); + } + + err = btbcm_finalize(hu->hdev, &fw_load_done, use_autobaud_mode); + if (err) + return err; + + /* Some devices ship with the controller default address. + * Allow the bootloader to set a valid address through the + * device tree. + */ + if (test_bit(HCI_QUIRK_INVALID_BDADDR, &hu->hdev->quirks)) + set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hu->hdev->quirks); + + if (!bcm_request_irq(bcm)) + err = bcm_setup_sleep(hu); + + return err; +} + +#define BCM_RECV_LM_DIAG \ + .type = BCM_LM_DIAG_PKT, \ + .hlen = BCM_LM_DIAG_SIZE, \ + .loff = 0, \ + .lsize = 0, \ + .maxlen = BCM_LM_DIAG_SIZE + +#define BCM_RECV_NULL \ + .type = BCM_NULL_PKT, \ + .hlen = BCM_NULL_SIZE, \ + .loff = 0, \ + .lsize = 0, \ + .maxlen = BCM_NULL_SIZE + +#define BCM_RECV_TYPE49 \ + .type = BCM_TYPE49_PKT, \ + .hlen = BCM_TYPE49_SIZE, \ + .loff = 0, \ + .lsize = 0, \ + .maxlen = BCM_TYPE49_SIZE + +#define BCM_RECV_TYPE52 \ + .type = BCM_TYPE52_PKT, \ + .hlen = BCM_TYPE52_SIZE, \ + .loff = 0, \ + .lsize = 0, \ + .maxlen = BCM_TYPE52_SIZE + +static const struct h4_recv_pkt bcm_recv_pkts[] = { + { H4_RECV_ACL, .recv = hci_recv_frame }, + { H4_RECV_SCO, .recv = hci_recv_frame }, + { H4_RECV_EVENT, .recv = hci_recv_frame }, + { H4_RECV_ISO, .recv = hci_recv_frame }, + { BCM_RECV_LM_DIAG, .recv = hci_recv_diag }, + { BCM_RECV_NULL, .recv = hci_recv_diag }, + { BCM_RECV_TYPE49, .recv = hci_recv_diag }, + { BCM_RECV_TYPE52, .recv = hci_recv_diag }, +}; + +static int bcm_recv(struct hci_uart *hu, const void *data, int count) +{ + struct bcm_data *bcm = hu->priv; + + if (!test_bit(HCI_UART_REGISTERED, &hu->flags)) + return -EUNATCH; + + bcm->rx_skb = h4_recv_buf(hu->hdev, bcm->rx_skb, data, count, + bcm_recv_pkts, ARRAY_SIZE(bcm_recv_pkts)); + if (IS_ERR(bcm->rx_skb)) { + int err = PTR_ERR(bcm->rx_skb); + bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err); + bcm->rx_skb = NULL; + return err; + } else if (!bcm->rx_skb) { + /* Delay auto-suspend when receiving completed packet */ + mutex_lock(&bcm_device_lock); + if (bcm->dev && bcm_device_exists(bcm->dev)) { + pm_runtime_get(bcm->dev->dev); + pm_runtime_mark_last_busy(bcm->dev->dev); + pm_runtime_put_autosuspend(bcm->dev->dev); + } + mutex_unlock(&bcm_device_lock); + } + + return count; +} + +static int bcm_enqueue(struct hci_uart *hu, struct sk_buff *skb) +{ + struct bcm_data *bcm = hu->priv; + + bt_dev_dbg(hu->hdev, "hu %p skb %p", hu, skb); + + /* Prepend skb with frame type */ + memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1); + skb_queue_tail(&bcm->txq, skb); + + return 0; +} + +static struct sk_buff *bcm_dequeue(struct hci_uart *hu) +{ + struct bcm_data *bcm = hu->priv; + struct sk_buff *skb = NULL; + struct bcm_device *bdev = NULL; + + mutex_lock(&bcm_device_lock); + + if (bcm_device_exists(bcm->dev)) { + bdev = bcm->dev; + pm_runtime_get_sync(bdev->dev); + /* Shall be resumed here */ + } + + skb = skb_dequeue(&bcm->txq); + + if (bdev) { + pm_runtime_mark_last_busy(bdev->dev); + pm_runtime_put_autosuspend(bdev->dev); + } + + mutex_unlock(&bcm_device_lock); + + return skb; +} + +#ifdef CONFIG_PM +static int bcm_suspend_device(struct device *dev) +{ + struct bcm_device *bdev = dev_get_drvdata(dev); + int err; + + bt_dev_dbg(bdev, ""); + + if (!bdev->is_suspended && bdev->hu) { + hci_uart_set_flow_control(bdev->hu, true); + + /* Once this returns, driver suspends BT via GPIO */ + bdev->is_suspended = true; + } + + /* Suspend the device */ + err = bdev->set_device_wakeup(bdev, false); + if (err) { + if (bdev->is_suspended && bdev->hu) { + bdev->is_suspended = false; + hci_uart_set_flow_control(bdev->hu, false); + } + return -EBUSY; + } + + bt_dev_dbg(bdev, "suspend, delaying 15 ms"); + msleep(15); + + return 0; +} + +static int bcm_resume_device(struct device *dev) +{ + struct bcm_device *bdev = dev_get_drvdata(dev); + int err; + + bt_dev_dbg(bdev, ""); + + err = bdev->set_device_wakeup(bdev, true); + if (err) { + dev_err(dev, "Failed to power up\n"); + return err; + } + + bt_dev_dbg(bdev, "resume, delaying 15 ms"); + msleep(15); + + /* When this executes, the device has woken up already */ + if (bdev->is_suspended && bdev->hu) { + bdev->is_suspended = false; + + hci_uart_set_flow_control(bdev->hu, false); + } + + return 0; +} +#endif + +#ifdef CONFIG_PM_SLEEP +/* suspend callback */ +static int bcm_suspend(struct device *dev) +{ + struct bcm_device *bdev = dev_get_drvdata(dev); + int error; + + bt_dev_dbg(bdev, "suspend: is_suspended %d", bdev->is_suspended); + + /* + * When used with a device instantiated as platform_device, bcm_suspend + * can be called at any time as long as the platform device is bound, + * so it should use bcm_device_lock to protect access to hci_uart + * and device_wake-up GPIO. + */ + mutex_lock(&bcm_device_lock); + + if (!bdev->hu) + goto unlock; + + if (pm_runtime_active(dev)) + bcm_suspend_device(dev); + + if (device_may_wakeup(dev) && bdev->irq > 0) { + error = enable_irq_wake(bdev->irq); + if (!error) + bt_dev_dbg(bdev, "BCM irq: enabled"); + } + +unlock: + mutex_unlock(&bcm_device_lock); + + return 0; +} + +/* resume callback */ +static int bcm_resume(struct device *dev) +{ + struct bcm_device *bdev = dev_get_drvdata(dev); + int err = 0; + + bt_dev_dbg(bdev, "resume: is_suspended %d", bdev->is_suspended); + + /* + * When used with a device instantiated as platform_device, bcm_resume + * can be called at any time as long as platform device is bound, + * so it should use bcm_device_lock to protect access to hci_uart + * and device_wake-up GPIO. + */ + mutex_lock(&bcm_device_lock); + + if (!bdev->hu) + goto unlock; + + if (device_may_wakeup(dev) && bdev->irq > 0) { + disable_irq_wake(bdev->irq); + bt_dev_dbg(bdev, "BCM irq: disabled"); + } + + err = bcm_resume_device(dev); + +unlock: + mutex_unlock(&bcm_device_lock); + + if (!err) { + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + } + + return 0; +} +#endif + +/* Some firmware reports an IRQ which does not work (wrong pin in fw table?) */ +static struct gpiod_lookup_table irq_on_int33fc02_pin17_gpios = { + .dev_id = "serial0-0", + .table = { + GPIO_LOOKUP("INT33FC:02", 17, "host-wakeup-alt", GPIO_ACTIVE_HIGH), + { } + }, +}; + +static const struct dmi_system_id bcm_broken_irq_dmi_table[] = { + { + .ident = "Acer Iconia One 7 B1-750", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), + DMI_MATCH(DMI_PRODUCT_NAME, "VESPA2"), + }, + .driver_data = &irq_on_int33fc02_pin17_gpios, + }, + { + .ident = "Asus TF103C", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "TF103C"), + }, + .driver_data = &irq_on_int33fc02_pin17_gpios, + }, + { + .ident = "Lenovo Yoga Tablet 2 830F/L / 1050F/L", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel Corp."), + DMI_MATCH(DMI_PRODUCT_NAME, "VALLEYVIEW C0 PLATFORM"), + DMI_MATCH(DMI_BOARD_NAME, "BYT-T FFD8"), + /* Partial match on beginning of BIOS version */ + DMI_MATCH(DMI_BIOS_VERSION, "BLADE_21"), + }, + .driver_data = &irq_on_int33fc02_pin17_gpios, + }, + { + .ident = "Meegopad T08", + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, + "To be filled by OEM."), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "T3 MRD"), + DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V1.1"), + }, + }, + { } +}; + +#ifdef CONFIG_ACPI +static const struct acpi_gpio_params first_gpio = { 0, 0, false }; +static const struct acpi_gpio_params second_gpio = { 1, 0, false }; +static const struct acpi_gpio_params third_gpio = { 2, 0, false }; + +static const struct acpi_gpio_mapping acpi_bcm_int_last_gpios[] = { + { "device-wakeup-gpios", &first_gpio, 1 }, + { "shutdown-gpios", &second_gpio, 1 }, + { "host-wakeup-gpios", &third_gpio, 1 }, + { }, +}; + +static const struct acpi_gpio_mapping acpi_bcm_int_first_gpios[] = { + { "host-wakeup-gpios", &first_gpio, 1 }, + { "device-wakeup-gpios", &second_gpio, 1 }, + { "shutdown-gpios", &third_gpio, 1 }, + { }, +}; + +static int bcm_resource(struct acpi_resource *ares, void *data) +{ + struct bcm_device *dev = data; + struct acpi_resource_extended_irq *irq; + struct acpi_resource_gpio *gpio; + struct acpi_resource_uart_serialbus *sb; + + switch (ares->type) { + case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: + irq = &ares->data.extended_irq; + if (irq->polarity != ACPI_ACTIVE_LOW) + dev_info(dev->dev, "ACPI Interrupt resource is active-high, this is usually wrong, treating the IRQ as active-low\n"); + dev->irq_active_low = true; + break; + + case ACPI_RESOURCE_TYPE_GPIO: + gpio = &ares->data.gpio; + if (gpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT) { + dev->gpio_int_idx = dev->gpio_count; + dev->irq_active_low = gpio->polarity == ACPI_ACTIVE_LOW; + } + dev->gpio_count++; + break; + + case ACPI_RESOURCE_TYPE_SERIAL_BUS: + sb = &ares->data.uart_serial_bus; + if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_UART) { + dev->init_speed = sb->default_baud_rate; + dev->oper_speed = 4000000; + } + break; + + default: + break; + } + + return 0; +} + +static int bcm_apple_set_device_wakeup(struct bcm_device *dev, bool awake) +{ + if (ACPI_FAILURE(acpi_execute_simple_method(dev->btlp, NULL, !awake))) + return -EIO; + + return 0; +} + +static int bcm_apple_set_shutdown(struct bcm_device *dev, bool powered) +{ + if (ACPI_FAILURE(acpi_evaluate_object(powered ? dev->btpu : dev->btpd, + NULL, NULL, NULL))) + return -EIO; + + return 0; +} + +static int bcm_apple_get_resources(struct bcm_device *dev) +{ + struct acpi_device *adev = ACPI_COMPANION(dev->dev); + const union acpi_object *obj; + + if (!adev || + ACPI_FAILURE(acpi_get_handle(adev->handle, "BTLP", &dev->btlp)) || + ACPI_FAILURE(acpi_get_handle(adev->handle, "BTPU", &dev->btpu)) || + ACPI_FAILURE(acpi_get_handle(adev->handle, "BTPD", &dev->btpd))) + return -ENODEV; + + if (!acpi_dev_get_property(adev, "baud", ACPI_TYPE_BUFFER, &obj) && + obj->buffer.length == 8) + dev->init_speed = *(u64 *)obj->buffer.pointer; + + dev->set_device_wakeup = bcm_apple_set_device_wakeup; + dev->set_shutdown = bcm_apple_set_shutdown; + + return 0; +} +#else +static inline int bcm_apple_get_resources(struct bcm_device *dev) +{ + return -EOPNOTSUPP; +} +#endif /* CONFIG_ACPI */ + +static int bcm_gpio_set_device_wakeup(struct bcm_device *dev, bool awake) +{ + gpiod_set_value_cansleep(dev->device_wakeup, awake); + return 0; +} + +static int bcm_gpio_set_shutdown(struct bcm_device *dev, bool powered) +{ + gpiod_set_value_cansleep(dev->shutdown, powered); + if (dev->reset) + /* + * The reset line is asserted on powerdown and deasserted + * on poweron so the inverse of powered is used. Notice + * that the GPIO line BT_RST_N needs to be specified as + * active low in the device tree or similar system + * description. + */ + gpiod_set_value_cansleep(dev->reset, !powered); + return 0; +} + +/* Try a bunch of names for TXCO */ +static struct clk *bcm_get_txco(struct device *dev) +{ + struct clk *clk; + + /* New explicit name */ + clk = devm_clk_get(dev, "txco"); + if (!IS_ERR(clk) || PTR_ERR(clk) == -EPROBE_DEFER) + return clk; + + /* Deprecated name */ + clk = devm_clk_get(dev, "extclk"); + if (!IS_ERR(clk) || PTR_ERR(clk) == -EPROBE_DEFER) + return clk; + + /* Original code used no name at all */ + return devm_clk_get(dev, NULL); +} + +static int bcm_get_resources(struct bcm_device *dev) +{ + const struct dmi_system_id *broken_irq_dmi_id; + const char *irq_con_id = "host-wakeup"; + int err; + + dev->name = dev_name(dev->dev); + + if (x86_apple_machine && !bcm_apple_get_resources(dev)) + return 0; + + dev->txco_clk = bcm_get_txco(dev->dev); + + /* Handle deferred probing */ + if (dev->txco_clk == ERR_PTR(-EPROBE_DEFER)) + return PTR_ERR(dev->txco_clk); + + /* Ignore all other errors as before */ + if (IS_ERR(dev->txco_clk)) + dev->txco_clk = NULL; + + dev->lpo_clk = devm_clk_get(dev->dev, "lpo"); + if (dev->lpo_clk == ERR_PTR(-EPROBE_DEFER)) + return PTR_ERR(dev->lpo_clk); + + if (IS_ERR(dev->lpo_clk)) + dev->lpo_clk = NULL; + + /* Check if we accidentally fetched the lpo clock twice */ + if (dev->lpo_clk && clk_is_match(dev->lpo_clk, dev->txco_clk)) { + devm_clk_put(dev->dev, dev->txco_clk); + dev->txco_clk = NULL; + } + + dev->device_wakeup = devm_gpiod_get_optional(dev->dev, "device-wakeup", + GPIOD_OUT_LOW); + if (IS_ERR(dev->device_wakeup)) + return PTR_ERR(dev->device_wakeup); + + dev->shutdown = devm_gpiod_get_optional(dev->dev, "shutdown", + GPIOD_OUT_LOW); + if (IS_ERR(dev->shutdown)) + return PTR_ERR(dev->shutdown); + + dev->reset = devm_gpiod_get_optional(dev->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(dev->reset)) + return PTR_ERR(dev->reset); + + dev->set_device_wakeup = bcm_gpio_set_device_wakeup; + dev->set_shutdown = bcm_gpio_set_shutdown; + + dev->supplies[0].supply = "vbat"; + dev->supplies[1].supply = "vddio"; + err = devm_regulator_bulk_get(dev->dev, BCM_NUM_SUPPLIES, + dev->supplies); + if (err) + return err; + + broken_irq_dmi_id = dmi_first_match(bcm_broken_irq_dmi_table); + if (broken_irq_dmi_id && broken_irq_dmi_id->driver_data) { + gpiod_add_lookup_table(broken_irq_dmi_id->driver_data); + irq_con_id = "host-wakeup-alt"; + dev->irq_active_low = false; + dev->irq = 0; + } + + /* IRQ can be declared in ACPI table as Interrupt or GpioInt */ + if (dev->irq <= 0) { + struct gpio_desc *gpio; + + gpio = devm_gpiod_get_optional(dev->dev, irq_con_id, GPIOD_IN); + if (IS_ERR(gpio)) + return PTR_ERR(gpio); + + dev->irq = gpiod_to_irq(gpio); + } + + if (broken_irq_dmi_id) { + if (broken_irq_dmi_id->driver_data) { + gpiod_remove_lookup_table(broken_irq_dmi_id->driver_data); + } else { + dev_info(dev->dev, "%s: Has a broken IRQ config, disabling IRQ support / runtime-pm\n", + broken_irq_dmi_id->ident); + dev->irq = 0; + } + } + + dev_dbg(dev->dev, "BCM irq: %d\n", dev->irq); + return 0; +} + +#ifdef CONFIG_ACPI +static int bcm_acpi_probe(struct bcm_device *dev) +{ + LIST_HEAD(resources); + const struct acpi_gpio_mapping *gpio_mapping = acpi_bcm_int_last_gpios; + struct resource_entry *entry; + int ret; + + /* Retrieve UART ACPI info */ + dev->gpio_int_idx = -1; + ret = acpi_dev_get_resources(ACPI_COMPANION(dev->dev), + &resources, bcm_resource, dev); + if (ret < 0) + return ret; + + resource_list_for_each_entry(entry, &resources) { + if (resource_type(entry->res) == IORESOURCE_IRQ) { + dev->irq = entry->res->start; + break; + } + } + acpi_dev_free_resource_list(&resources); + + /* If the DSDT uses an Interrupt resource for the IRQ, then there are + * only 2 GPIO resources, we use the irq-last mapping for this, since + * we already have an irq the 3th / last mapping will not be used. + */ + if (dev->irq) + gpio_mapping = acpi_bcm_int_last_gpios; + else if (dev->gpio_int_idx == 0) + gpio_mapping = acpi_bcm_int_first_gpios; + else if (dev->gpio_int_idx == 2) + gpio_mapping = acpi_bcm_int_last_gpios; + else + dev_warn(dev->dev, "Unexpected ACPI gpio_int_idx: %d\n", + dev->gpio_int_idx); + + /* Warn if our expectations are not met. */ + if (dev->gpio_count != (dev->irq ? 2 : 3)) + dev_warn(dev->dev, "Unexpected number of ACPI GPIOs: %d\n", + dev->gpio_count); + + ret = devm_acpi_dev_add_driver_gpios(dev->dev, gpio_mapping); + if (ret) + return ret; + + if (irq_polarity != -1) { + dev->irq_active_low = irq_polarity; + dev_warn(dev->dev, "Overwriting IRQ polarity to active %s by module-param\n", + dev->irq_active_low ? "low" : "high"); + } + + return 0; +} +#else +static int bcm_acpi_probe(struct bcm_device *dev) +{ + return -EINVAL; +} +#endif /* CONFIG_ACPI */ + +static int bcm_of_probe(struct bcm_device *bdev) +{ + bdev->use_autobaud_mode = device_property_read_bool(bdev->dev, + "brcm,requires-autobaud-mode"); + device_property_read_u32(bdev->dev, "max-speed", &bdev->oper_speed); + device_property_read_u8_array(bdev->dev, "brcm,bt-pcm-int-params", + bdev->pcm_int_params, 5); + bdev->irq = of_irq_get_byname(bdev->dev->of_node, "host-wakeup"); + bdev->irq_active_low = irq_get_trigger_type(bdev->irq) + & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW); + return 0; +} + +static int bcm_probe(struct platform_device *pdev) +{ + struct bcm_device *dev; + int ret; + + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + dev->dev = &pdev->dev; + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return ret; + + dev->irq = ret; + + /* Initialize routing field to an unused value */ + dev->pcm_int_params[0] = 0xff; + + if (has_acpi_companion(&pdev->dev)) { + ret = bcm_acpi_probe(dev); + if (ret) + return ret; + } + + ret = bcm_get_resources(dev); + if (ret) + return ret; + + platform_set_drvdata(pdev, dev); + + dev_info(&pdev->dev, "%s device registered.\n", dev->name); + + /* Place this instance on the device list */ + mutex_lock(&bcm_device_lock); + list_add_tail(&dev->list, &bcm_device_list); + mutex_unlock(&bcm_device_lock); + + ret = bcm_gpio_set_power(dev, false); + if (ret) + dev_err(&pdev->dev, "Failed to power down\n"); + + return 0; +} + +static int bcm_remove(struct platform_device *pdev) +{ + struct bcm_device *dev = platform_get_drvdata(pdev); + + mutex_lock(&bcm_device_lock); + list_del(&dev->list); + mutex_unlock(&bcm_device_lock); + + dev_info(&pdev->dev, "%s device unregistered.\n", dev->name); + + return 0; +} + +static const struct hci_uart_proto bcm_proto = { + .id = HCI_UART_BCM, + .name = "Broadcom", + .manufacturer = 15, + .init_speed = 115200, + .open = bcm_open, + .close = bcm_close, + .flush = bcm_flush, + .setup = bcm_setup, + .set_baudrate = bcm_set_baudrate, + .recv = bcm_recv, + .enqueue = bcm_enqueue, + .dequeue = bcm_dequeue, +}; + +#ifdef CONFIG_ACPI + +/* bcm43430a0/a1 BT does not support 48MHz UART clock, limit to 2000000 baud */ +static struct bcm_device_data bcm43430_device_data = { + .max_speed = 2000000, +}; + +static const struct acpi_device_id bcm_acpi_match[] = { + { "BCM2E00" }, + { "BCM2E01" }, + { "BCM2E02" }, + { "BCM2E03" }, + { "BCM2E04" }, + { "BCM2E05" }, + { "BCM2E06" }, + { "BCM2E07" }, + { "BCM2E08" }, + { "BCM2E09" }, + { "BCM2E0A" }, + { "BCM2E0B" }, + { "BCM2E0C" }, + { "BCM2E0D" }, + { "BCM2E0E" }, + { "BCM2E0F" }, + { "BCM2E10" }, + { "BCM2E11" }, + { "BCM2E12" }, + { "BCM2E13" }, + { "BCM2E14" }, + { "BCM2E15" }, + { "BCM2E16" }, + { "BCM2E17" }, + { "BCM2E18" }, + { "BCM2E19" }, + { "BCM2E1A" }, + { "BCM2E1B" }, + { "BCM2E1C" }, + { "BCM2E1D" }, + { "BCM2E1F" }, + { "BCM2E20" }, + { "BCM2E21" }, + { "BCM2E22" }, + { "BCM2E23" }, + { "BCM2E24" }, + { "BCM2E25" }, + { "BCM2E26" }, + { "BCM2E27" }, + { "BCM2E28" }, + { "BCM2E29" }, + { "BCM2E2A" }, + { "BCM2E2B" }, + { "BCM2E2C" }, + { "BCM2E2D" }, + { "BCM2E2E" }, + { "BCM2E2F" }, + { "BCM2E30" }, + { "BCM2E31" }, + { "BCM2E32" }, + { "BCM2E33" }, + { "BCM2E34" }, + { "BCM2E35" }, + { "BCM2E36" }, + { "BCM2E37" }, + { "BCM2E38" }, + { "BCM2E39" }, + { "BCM2E3A" }, + { "BCM2E3B" }, + { "BCM2E3C" }, + { "BCM2E3D" }, + { "BCM2E3E" }, + { "BCM2E3F" }, + { "BCM2E40" }, + { "BCM2E41" }, + { "BCM2E42" }, + { "BCM2E43" }, + { "BCM2E44" }, + { "BCM2E45" }, + { "BCM2E46" }, + { "BCM2E47" }, + { "BCM2E48" }, + { "BCM2E49" }, + { "BCM2E4A" }, + { "BCM2E4B" }, + { "BCM2E4C" }, + { "BCM2E4D" }, + { "BCM2E4E" }, + { "BCM2E4F" }, + { "BCM2E50" }, + { "BCM2E51" }, + { "BCM2E52" }, + { "BCM2E53" }, + { "BCM2E54" }, + { "BCM2E55" }, + { "BCM2E56" }, + { "BCM2E57" }, + { "BCM2E58" }, + { "BCM2E59" }, + { "BCM2E5A" }, + { "BCM2E5B" }, + { "BCM2E5C" }, + { "BCM2E5D" }, + { "BCM2E5E" }, + { "BCM2E5F" }, + { "BCM2E60" }, + { "BCM2E61" }, + { "BCM2E62" }, + { "BCM2E63" }, + { "BCM2E64" }, + { "BCM2E65" }, + { "BCM2E66" }, + { "BCM2E67" }, + { "BCM2E68" }, + { "BCM2E69" }, + { "BCM2E6B" }, + { "BCM2E6D" }, + { "BCM2E6E" }, + { "BCM2E6F" }, + { "BCM2E70" }, + { "BCM2E71" }, + { "BCM2E72" }, + { "BCM2E73" }, + { "BCM2E74", (long)&bcm43430_device_data }, + { "BCM2E75", (long)&bcm43430_device_data }, + { "BCM2E76" }, + { "BCM2E77" }, + { "BCM2E78" }, + { "BCM2E79" }, + { "BCM2E7A" }, + { "BCM2E7B", (long)&bcm43430_device_data }, + { "BCM2E7C" }, + { "BCM2E7D" }, + { "BCM2E7E" }, + { "BCM2E7F" }, + { "BCM2E80", (long)&bcm43430_device_data }, + { "BCM2E81" }, + { "BCM2E82" }, + { "BCM2E83" }, + { "BCM2E84" }, + { "BCM2E85" }, + { "BCM2E86" }, + { "BCM2E87" }, + { "BCM2E88" }, + { "BCM2E89", (long)&bcm43430_device_data }, + { "BCM2E8A" }, + { "BCM2E8B" }, + { "BCM2E8C" }, + { "BCM2E8D" }, + { "BCM2E8E" }, + { "BCM2E90" }, + { "BCM2E92" }, + { "BCM2E93" }, + { "BCM2E94", (long)&bcm43430_device_data }, + { "BCM2E95" }, + { "BCM2E96" }, + { "BCM2E97" }, + { "BCM2E98" }, + { "BCM2E99", (long)&bcm43430_device_data }, + { "BCM2E9A" }, + { "BCM2E9B", (long)&bcm43430_device_data }, + { "BCM2E9C" }, + { "BCM2E9D" }, + { "BCM2E9F", (long)&bcm43430_device_data }, + { "BCM2EA0" }, + { "BCM2EA1" }, + { "BCM2EA2", (long)&bcm43430_device_data }, + { "BCM2EA3", (long)&bcm43430_device_data }, + { "BCM2EA4" }, + { "BCM2EA5" }, + { "BCM2EA6" }, + { "BCM2EA7" }, + { "BCM2EA8" }, + { "BCM2EA9" }, + { "BCM2EAA", (long)&bcm43430_device_data }, + { "BCM2EAB", (long)&bcm43430_device_data }, + { "BCM2EAC", (long)&bcm43430_device_data }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, bcm_acpi_match); +#endif + +/* suspend and resume callbacks */ +static const struct dev_pm_ops bcm_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(bcm_suspend, bcm_resume) + SET_RUNTIME_PM_OPS(bcm_suspend_device, bcm_resume_device, NULL) +}; + +static struct platform_driver bcm_driver = { + .probe = bcm_probe, + .remove = bcm_remove, + .driver = { + .name = "hci_bcm", + .acpi_match_table = ACPI_PTR(bcm_acpi_match), + .pm = &bcm_pm_ops, + }, +}; + +static int bcm_serdev_probe(struct serdev_device *serdev) +{ + struct bcm_device *bcmdev; + const struct bcm_device_data *data; + int err; + + bcmdev = devm_kzalloc(&serdev->dev, sizeof(*bcmdev), GFP_KERNEL); + if (!bcmdev) + return -ENOMEM; + + bcmdev->dev = &serdev->dev; +#ifdef CONFIG_PM + bcmdev->hu = &bcmdev->serdev_hu; +#endif + bcmdev->serdev_hu.serdev = serdev; + serdev_device_set_drvdata(serdev, bcmdev); + + /* Initialize routing field to an unused value */ + bcmdev->pcm_int_params[0] = 0xff; + + if (has_acpi_companion(&serdev->dev)) + err = bcm_acpi_probe(bcmdev); + else + err = bcm_of_probe(bcmdev); + if (err) + return err; + + err = bcm_get_resources(bcmdev); + if (err) + return err; + + if (!bcmdev->shutdown) { + dev_warn(&serdev->dev, + "No reset resource, using default baud rate\n"); + bcmdev->oper_speed = bcmdev->init_speed; + } + + err = bcm_gpio_set_power(bcmdev, false); + if (err) + dev_err(&serdev->dev, "Failed to power down\n"); + + data = device_get_match_data(bcmdev->dev); + if (data) { + bcmdev->max_autobaud_speed = data->max_autobaud_speed; + bcmdev->no_early_set_baudrate = data->no_early_set_baudrate; + bcmdev->drive_rts_on_open = data->drive_rts_on_open; + bcmdev->no_uart_clock_set = data->no_uart_clock_set; + if (data->max_speed && bcmdev->oper_speed > data->max_speed) + bcmdev->oper_speed = data->max_speed; + } + + return hci_uart_register_device(&bcmdev->serdev_hu, &bcm_proto); +} + +static void bcm_serdev_remove(struct serdev_device *serdev) +{ + struct bcm_device *bcmdev = serdev_device_get_drvdata(serdev); + + hci_uart_unregister_device(&bcmdev->serdev_hu); +} + +#ifdef CONFIG_OF +static struct bcm_device_data bcm4354_device_data = { + .no_early_set_baudrate = true, +}; + +static struct bcm_device_data bcm43438_device_data = { + .drive_rts_on_open = true, +}; + +static struct bcm_device_data cyw4373a0_device_data = { + .no_uart_clock_set = true, +}; + +static struct bcm_device_data cyw55572_device_data = { + .max_autobaud_speed = 921600, +}; + +static const struct of_device_id bcm_bluetooth_of_match[] = { + { .compatible = "brcm,bcm20702a1" }, + { .compatible = "brcm,bcm4329-bt" }, + { .compatible = "brcm,bcm4330-bt" }, + { .compatible = "brcm,bcm4334-bt" }, + { .compatible = "brcm,bcm4345c5" }, + { .compatible = "brcm,bcm43430a0-bt" }, + { .compatible = "brcm,bcm43430a1-bt" }, + { .compatible = "brcm,bcm43438-bt", .data = &bcm43438_device_data }, + { .compatible = "brcm,bcm4349-bt", .data = &bcm43438_device_data }, + { .compatible = "brcm,bcm43540-bt", .data = &bcm4354_device_data }, + { .compatible = "brcm,bcm4335a0" }, + { .compatible = "cypress,cyw4373a0-bt", .data = &cyw4373a0_device_data }, + { .compatible = "infineon,cyw55572-bt", .data = &cyw55572_device_data }, + { }, +}; +MODULE_DEVICE_TABLE(of, bcm_bluetooth_of_match); +#endif + +static struct serdev_device_driver bcm_serdev_driver = { + .probe = bcm_serdev_probe, + .remove = bcm_serdev_remove, + .driver = { + .name = "hci_uart_bcm", + .of_match_table = of_match_ptr(bcm_bluetooth_of_match), + .acpi_match_table = ACPI_PTR(bcm_acpi_match), + .pm = &bcm_pm_ops, + }, +}; + +int __init bcm_init(void) +{ + /* For now, we need to keep both platform device + * driver (ACPI generated) and serdev driver (DT). + */ + platform_driver_register(&bcm_driver); + serdev_device_driver_register(&bcm_serdev_driver); + + return hci_uart_register_proto(&bcm_proto); +} + +int __exit bcm_deinit(void) +{ + platform_driver_unregister(&bcm_driver); + serdev_device_driver_unregister(&bcm_serdev_driver); + + return hci_uart_unregister_proto(&bcm_proto); +} |