summaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth/hci_intel.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/bluetooth/hci_intel.c')
-rw-r--r--drivers/bluetooth/hci_intel.c1234
1 files changed, 1234 insertions, 0 deletions
diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
new file mode 100644
index 0000000000..78afb9a348
--- /dev/null
+++ b/drivers/bluetooth/hci_intel.c
@@ -0,0 +1,1234 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ * Bluetooth HCI UART driver for Intel devices
+ *
+ * Copyright (C) 2015 Intel Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/wait.h>
+#include <linux/tty.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+#include "btintel.h"
+
+#define STATE_BOOTLOADER 0
+#define STATE_DOWNLOADING 1
+#define STATE_FIRMWARE_LOADED 2
+#define STATE_FIRMWARE_FAILED 3
+#define STATE_BOOTING 4
+#define STATE_LPM_ENABLED 5
+#define STATE_TX_ACTIVE 6
+#define STATE_SUSPENDED 7
+#define STATE_LPM_TRANSACTION 8
+
+#define HCI_LPM_WAKE_PKT 0xf0
+#define HCI_LPM_PKT 0xf1
+#define HCI_LPM_MAX_SIZE 10
+#define HCI_LPM_HDR_SIZE HCI_EVENT_HDR_SIZE
+
+#define LPM_OP_TX_NOTIFY 0x00
+#define LPM_OP_SUSPEND_ACK 0x02
+#define LPM_OP_RESUME_ACK 0x03
+
+#define LPM_SUSPEND_DELAY_MS 1000
+
+struct hci_lpm_pkt {
+ __u8 opcode;
+ __u8 dlen;
+ __u8 data[];
+} __packed;
+
+struct intel_device {
+ struct list_head list;
+ struct platform_device *pdev;
+ struct gpio_desc *reset;
+ struct hci_uart *hu;
+ struct mutex hu_lock;
+ int irq;
+};
+
+static LIST_HEAD(intel_device_list);
+static DEFINE_MUTEX(intel_device_list_lock);
+
+struct intel_data {
+ struct sk_buff *rx_skb;
+ struct sk_buff_head txq;
+ struct work_struct busy_work;
+ struct hci_uart *hu;
+ unsigned long flags;
+};
+
+static u8 intel_convert_speed(unsigned int speed)
+{
+ switch (speed) {
+ case 9600:
+ return 0x00;
+ case 19200:
+ return 0x01;
+ case 38400:
+ return 0x02;
+ case 57600:
+ return 0x03;
+ case 115200:
+ return 0x04;
+ case 230400:
+ return 0x05;
+ case 460800:
+ return 0x06;
+ case 921600:
+ return 0x07;
+ case 1843200:
+ return 0x08;
+ case 3250000:
+ return 0x09;
+ case 2000000:
+ return 0x0a;
+ case 3000000:
+ return 0x0b;
+ default:
+ return 0xff;
+ }
+}
+
+static int intel_wait_booting(struct hci_uart *hu)
+{
+ struct intel_data *intel = hu->priv;
+ int err;
+
+ err = wait_on_bit_timeout(&intel->flags, STATE_BOOTING,
+ TASK_INTERRUPTIBLE,
+ msecs_to_jiffies(1000));
+
+ if (err == -EINTR) {
+ bt_dev_err(hu->hdev, "Device boot interrupted");
+ return -EINTR;
+ }
+
+ if (err) {
+ bt_dev_err(hu->hdev, "Device boot timeout");
+ return -ETIMEDOUT;
+ }
+
+ return err;
+}
+
+#ifdef CONFIG_PM
+static int intel_wait_lpm_transaction(struct hci_uart *hu)
+{
+ struct intel_data *intel = hu->priv;
+ int err;
+
+ err = wait_on_bit_timeout(&intel->flags, STATE_LPM_TRANSACTION,
+ TASK_INTERRUPTIBLE,
+ msecs_to_jiffies(1000));
+
+ if (err == -EINTR) {
+ bt_dev_err(hu->hdev, "LPM transaction interrupted");
+ return -EINTR;
+ }
+
+ if (err) {
+ bt_dev_err(hu->hdev, "LPM transaction timeout");
+ return -ETIMEDOUT;
+ }
+
+ return err;
+}
+
+static int intel_lpm_suspend(struct hci_uart *hu)
+{
+ static const u8 suspend[] = { 0x01, 0x01, 0x01 };
+ struct intel_data *intel = hu->priv;
+ struct sk_buff *skb;
+
+ if (!test_bit(STATE_LPM_ENABLED, &intel->flags) ||
+ test_bit(STATE_SUSPENDED, &intel->flags))
+ return 0;
+
+ if (test_bit(STATE_TX_ACTIVE, &intel->flags))
+ return -EAGAIN;
+
+ bt_dev_dbg(hu->hdev, "Suspending");
+
+ skb = bt_skb_alloc(sizeof(suspend), GFP_KERNEL);
+ if (!skb) {
+ bt_dev_err(hu->hdev, "Failed to alloc memory for LPM packet");
+ return -ENOMEM;
+ }
+
+ skb_put_data(skb, suspend, sizeof(suspend));
+ hci_skb_pkt_type(skb) = HCI_LPM_PKT;
+
+ set_bit(STATE_LPM_TRANSACTION, &intel->flags);
+
+ /* LPM flow is a priority, enqueue packet at list head */
+ skb_queue_head(&intel->txq, skb);
+ hci_uart_tx_wakeup(hu);
+
+ intel_wait_lpm_transaction(hu);
+ /* Even in case of failure, continue and test the suspended flag */
+
+ clear_bit(STATE_LPM_TRANSACTION, &intel->flags);
+
+ if (!test_bit(STATE_SUSPENDED, &intel->flags)) {
+ bt_dev_err(hu->hdev, "Device suspend error");
+ return -EINVAL;
+ }
+
+ bt_dev_dbg(hu->hdev, "Suspended");
+
+ hci_uart_set_flow_control(hu, true);
+
+ return 0;
+}
+
+static int intel_lpm_resume(struct hci_uart *hu)
+{
+ struct intel_data *intel = hu->priv;
+ struct sk_buff *skb;
+
+ if (!test_bit(STATE_LPM_ENABLED, &intel->flags) ||
+ !test_bit(STATE_SUSPENDED, &intel->flags))
+ return 0;
+
+ bt_dev_dbg(hu->hdev, "Resuming");
+
+ hci_uart_set_flow_control(hu, false);
+
+ skb = bt_skb_alloc(0, GFP_KERNEL);
+ if (!skb) {
+ bt_dev_err(hu->hdev, "Failed to alloc memory for LPM packet");
+ return -ENOMEM;
+ }
+
+ hci_skb_pkt_type(skb) = HCI_LPM_WAKE_PKT;
+
+ set_bit(STATE_LPM_TRANSACTION, &intel->flags);
+
+ /* LPM flow is a priority, enqueue packet at list head */
+ skb_queue_head(&intel->txq, skb);
+ hci_uart_tx_wakeup(hu);
+
+ intel_wait_lpm_transaction(hu);
+ /* Even in case of failure, continue and test the suspended flag */
+
+ clear_bit(STATE_LPM_TRANSACTION, &intel->flags);
+
+ if (test_bit(STATE_SUSPENDED, &intel->flags)) {
+ bt_dev_err(hu->hdev, "Device resume error");
+ return -EINVAL;
+ }
+
+ bt_dev_dbg(hu->hdev, "Resumed");
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+static int intel_lpm_host_wake(struct hci_uart *hu)
+{
+ static const u8 lpm_resume_ack[] = { LPM_OP_RESUME_ACK, 0x00 };
+ struct intel_data *intel = hu->priv;
+ struct sk_buff *skb;
+
+ hci_uart_set_flow_control(hu, false);
+
+ clear_bit(STATE_SUSPENDED, &intel->flags);
+
+ skb = bt_skb_alloc(sizeof(lpm_resume_ack), GFP_KERNEL);
+ if (!skb) {
+ bt_dev_err(hu->hdev, "Failed to alloc memory for LPM packet");
+ return -ENOMEM;
+ }
+
+ skb_put_data(skb, lpm_resume_ack, sizeof(lpm_resume_ack));
+ hci_skb_pkt_type(skb) = HCI_LPM_PKT;
+
+ /* LPM flow is a priority, enqueue packet at list head */
+ skb_queue_head(&intel->txq, skb);
+ hci_uart_tx_wakeup(hu);
+
+ bt_dev_dbg(hu->hdev, "Resumed by controller");
+
+ return 0;
+}
+
+static irqreturn_t intel_irq(int irq, void *dev_id)
+{
+ struct intel_device *idev = dev_id;
+
+ dev_info(&idev->pdev->dev, "hci_intel irq\n");
+
+ mutex_lock(&idev->hu_lock);
+ if (idev->hu)
+ intel_lpm_host_wake(idev->hu);
+ mutex_unlock(&idev->hu_lock);
+
+ /* Host/Controller are now LPM resumed, trigger a new delayed suspend */
+ pm_runtime_get(&idev->pdev->dev);
+ pm_runtime_mark_last_busy(&idev->pdev->dev);
+ pm_runtime_put_autosuspend(&idev->pdev->dev);
+
+ return IRQ_HANDLED;
+}
+
+static int intel_set_power(struct hci_uart *hu, bool powered)
+{
+ struct intel_device *idev;
+ int err = -ENODEV;
+
+ if (!hu->tty->dev)
+ return err;
+
+ mutex_lock(&intel_device_list_lock);
+
+ list_for_each_entry(idev, &intel_device_list, list) {
+ /* tty device and pdev device should share the same parent
+ * which is the UART port.
+ */
+ if (hu->tty->dev->parent != idev->pdev->dev.parent)
+ continue;
+
+ if (!idev->reset) {
+ err = -ENOTSUPP;
+ break;
+ }
+
+ BT_INFO("hu %p, Switching compatible pm device (%s) to %u",
+ hu, dev_name(&idev->pdev->dev), powered);
+
+ gpiod_set_value(idev->reset, powered);
+
+ /* Provide to idev a hu reference which is used to run LPM
+ * transactions (lpm suspend/resume) from PM callbacks.
+ * hu needs to be protected against concurrent removing during
+ * these PM ops.
+ */
+ mutex_lock(&idev->hu_lock);
+ idev->hu = powered ? hu : NULL;
+ mutex_unlock(&idev->hu_lock);
+
+ if (idev->irq < 0)
+ break;
+
+ if (powered && device_can_wakeup(&idev->pdev->dev)) {
+ err = devm_request_threaded_irq(&idev->pdev->dev,
+ idev->irq, NULL,
+ intel_irq,
+ IRQF_ONESHOT,
+ "bt-host-wake", idev);
+ if (err) {
+ BT_ERR("hu %p, unable to allocate irq-%d",
+ hu, idev->irq);
+ break;
+ }
+
+ device_wakeup_enable(&idev->pdev->dev);
+
+ pm_runtime_set_active(&idev->pdev->dev);
+ pm_runtime_use_autosuspend(&idev->pdev->dev);
+ pm_runtime_set_autosuspend_delay(&idev->pdev->dev,
+ LPM_SUSPEND_DELAY_MS);
+ pm_runtime_enable(&idev->pdev->dev);
+ } else if (!powered && device_may_wakeup(&idev->pdev->dev)) {
+ devm_free_irq(&idev->pdev->dev, idev->irq, idev);
+ device_wakeup_disable(&idev->pdev->dev);
+
+ pm_runtime_disable(&idev->pdev->dev);
+ }
+ }
+
+ mutex_unlock(&intel_device_list_lock);
+
+ return err;
+}
+
+static void intel_busy_work(struct work_struct *work)
+{
+ struct intel_data *intel = container_of(work, struct intel_data,
+ busy_work);
+ struct intel_device *idev;
+
+ if (!intel->hu->tty->dev)
+ return;
+
+ /* Link is busy, delay the suspend */
+ mutex_lock(&intel_device_list_lock);
+ list_for_each_entry(idev, &intel_device_list, list) {
+ if (intel->hu->tty->dev->parent == idev->pdev->dev.parent) {
+ pm_runtime_get(&idev->pdev->dev);
+ pm_runtime_mark_last_busy(&idev->pdev->dev);
+ pm_runtime_put_autosuspend(&idev->pdev->dev);
+ break;
+ }
+ }
+ mutex_unlock(&intel_device_list_lock);
+}
+
+static int intel_open(struct hci_uart *hu)
+{
+ struct intel_data *intel;
+
+ BT_DBG("hu %p", hu);
+
+ if (!hci_uart_has_flow_control(hu))
+ return -EOPNOTSUPP;
+
+ intel = kzalloc(sizeof(*intel), GFP_KERNEL);
+ if (!intel)
+ return -ENOMEM;
+
+ skb_queue_head_init(&intel->txq);
+ INIT_WORK(&intel->busy_work, intel_busy_work);
+
+ intel->hu = hu;
+
+ hu->priv = intel;
+
+ if (!intel_set_power(hu, true))
+ set_bit(STATE_BOOTING, &intel->flags);
+
+ return 0;
+}
+
+static int intel_close(struct hci_uart *hu)
+{
+ struct intel_data *intel = hu->priv;
+
+ BT_DBG("hu %p", hu);
+
+ cancel_work_sync(&intel->busy_work);
+
+ intel_set_power(hu, false);
+
+ skb_queue_purge(&intel->txq);
+ kfree_skb(intel->rx_skb);
+ kfree(intel);
+
+ hu->priv = NULL;
+ return 0;
+}
+
+static int intel_flush(struct hci_uart *hu)
+{
+ struct intel_data *intel = hu->priv;
+
+ BT_DBG("hu %p", hu);
+
+ skb_queue_purge(&intel->txq);
+
+ return 0;
+}
+
+static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
+{
+ struct sk_buff *skb;
+ struct hci_event_hdr *hdr;
+ struct hci_ev_cmd_complete *evt;
+
+ skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL);
+ if (!skb)
+ return -ENOMEM;
+
+ hdr = skb_put(skb, sizeof(*hdr));
+ hdr->evt = HCI_EV_CMD_COMPLETE;
+ hdr->plen = sizeof(*evt) + 1;
+
+ evt = skb_put(skb, sizeof(*evt));
+ evt->ncmd = 0x01;
+ evt->opcode = cpu_to_le16(opcode);
+
+ skb_put_u8(skb, 0x00);
+
+ hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
+
+ return hci_recv_frame(hdev, skb);
+}
+
+static int intel_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+ struct intel_data *intel = hu->priv;
+ struct hci_dev *hdev = hu->hdev;
+ u8 speed_cmd[] = { 0x06, 0xfc, 0x01, 0x00 };
+ struct sk_buff *skb;
+ int err;
+
+ /* This can be the first command sent to the chip, check
+ * that the controller is ready.
+ */
+ err = intel_wait_booting(hu);
+
+ clear_bit(STATE_BOOTING, &intel->flags);
+
+ /* In case of timeout, try to continue anyway */
+ if (err && err != -ETIMEDOUT)
+ return err;
+
+ bt_dev_info(hdev, "Change controller speed to %d", speed);
+
+ speed_cmd[3] = intel_convert_speed(speed);
+ if (speed_cmd[3] == 0xff) {
+ bt_dev_err(hdev, "Unsupported speed");
+ return -EINVAL;
+ }
+
+ /* Device will not accept speed change if Intel version has not been
+ * previously requested.
+ */
+ skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+ kfree_skb(skb);
+
+ skb = bt_skb_alloc(sizeof(speed_cmd), GFP_KERNEL);
+ if (!skb) {
+ bt_dev_err(hdev, "Failed to alloc memory for baudrate packet");
+ return -ENOMEM;
+ }
+
+ skb_put_data(skb, speed_cmd, sizeof(speed_cmd));
+ hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
+
+ hci_uart_set_flow_control(hu, true);
+
+ skb_queue_tail(&intel->txq, skb);
+ hci_uart_tx_wakeup(hu);
+
+ /* wait 100ms to change baudrate on controller side */
+ msleep(100);
+
+ hci_uart_set_baudrate(hu, speed);
+ hci_uart_set_flow_control(hu, false);
+
+ return 0;
+}
+
+static int intel_setup(struct hci_uart *hu)
+{
+ struct intel_data *intel = hu->priv;
+ struct hci_dev *hdev = hu->hdev;
+ struct sk_buff *skb;
+ struct intel_version ver;
+ struct intel_boot_params params;
+ struct intel_device *idev;
+ const struct firmware *fw;
+ char fwname[64];
+ u32 boot_param;
+ ktime_t calltime, delta, rettime;
+ unsigned long long duration;
+ unsigned int init_speed, oper_speed;
+ int speed_change = 0;
+ int err;
+
+ bt_dev_dbg(hdev, "start intel_setup");
+
+ hu->hdev->set_diag = btintel_set_diag;
+ hu->hdev->set_bdaddr = btintel_set_bdaddr;
+
+ /* Set the default boot parameter to 0x0 and it is updated to
+ * SKU specific boot parameter after reading Intel_Write_Boot_Params
+ * command while downloading the firmware.
+ */
+ boot_param = 0x00000000;
+
+ calltime = ktime_get();
+
+ if (hu->init_speed)
+ init_speed = hu->init_speed;
+ else
+ init_speed = hu->proto->init_speed;
+
+ if (hu->oper_speed)
+ oper_speed = hu->oper_speed;
+ else
+ oper_speed = hu->proto->oper_speed;
+
+ if (oper_speed && init_speed && oper_speed != init_speed)
+ speed_change = 1;
+
+ /* Check that the controller is ready */
+ err = intel_wait_booting(hu);
+
+ clear_bit(STATE_BOOTING, &intel->flags);
+
+ /* In case of timeout, try to continue anyway */
+ if (err && err != -ETIMEDOUT)
+ return err;
+
+ set_bit(STATE_BOOTLOADER, &intel->flags);
+
+ /* Read the Intel version information to determine if the device
+ * is in bootloader mode or if it already has operational firmware
+ * loaded.
+ */
+ err = btintel_read_version(hdev, &ver);
+ if (err)
+ return err;
+
+ /* The hardware platform number has a fixed value of 0x37 and
+ * for now only accept this single value.
+ */
+ if (ver.hw_platform != 0x37) {
+ bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
+ ver.hw_platform);
+ return -EINVAL;
+ }
+
+ /* Check for supported iBT hardware variants of this firmware
+ * loading method.
+ *
+ * This check has been put in place to ensure correct forward
+ * compatibility options when newer hardware variants come along.
+ */
+ switch (ver.hw_variant) {
+ case 0x0b: /* LnP */
+ case 0x0c: /* WsP */
+ case 0x12: /* ThP */
+ break;
+ default:
+ bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
+ ver.hw_variant);
+ return -EINVAL;
+ }
+
+ btintel_version_info(hdev, &ver);
+
+ /* The firmware variant determines if the device is in bootloader
+ * mode or is running operational firmware. The value 0x06 identifies
+ * the bootloader and the value 0x23 identifies the operational
+ * firmware.
+ *
+ * When the operational firmware is already present, then only
+ * the check for valid Bluetooth device address is needed. This
+ * determines if the device will be added as configured or
+ * unconfigured controller.
+ *
+ * It is not possible to use the Secure Boot Parameters in this
+ * case since that command is only available in bootloader mode.
+ */
+ if (ver.fw_variant == 0x23) {
+ clear_bit(STATE_BOOTLOADER, &intel->flags);
+ btintel_check_bdaddr(hdev);
+ return 0;
+ }
+
+ /* If the device is not in bootloader mode, then the only possible
+ * choice is to return an error and abort the device initialization.
+ */
+ if (ver.fw_variant != 0x06) {
+ bt_dev_err(hdev, "Unsupported Intel firmware variant (%u)",
+ ver.fw_variant);
+ return -ENODEV;
+ }
+
+ /* Read the secure boot parameters to identify the operating
+ * details of the bootloader.
+ */
+ err = btintel_read_boot_params(hdev, &params);
+ if (err)
+ return err;
+
+ /* It is required that every single firmware fragment is acknowledged
+ * with a command complete event. If the boot parameters indicate
+ * that this bootloader does not send them, then abort the setup.
+ */
+ if (params.limited_cce != 0x00) {
+ bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)",
+ params.limited_cce);
+ return -EINVAL;
+ }
+
+ /* If the OTP has no valid Bluetooth device address, then there will
+ * also be no valid address for the operational firmware.
+ */
+ if (!bacmp(&params.otp_bdaddr, BDADDR_ANY)) {
+ bt_dev_info(hdev, "No device address configured");
+ set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+ }
+
+ /* With this Intel bootloader only the hardware variant and device
+ * revision information are used to select the right firmware for SfP
+ * and WsP.
+ *
+ * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi.
+ *
+ * Currently the supported hardware variants are:
+ * 11 (0x0b) for iBT 3.0 (LnP/SfP)
+ * 12 (0x0c) for iBT 3.5 (WsP)
+ *
+ * For ThP/JfP and for future SKU's, the FW name varies based on HW
+ * variant, HW revision and FW revision, as these are dependent on CNVi
+ * and RF Combination.
+ *
+ * 18 (0x12) for iBT3.5 (ThP/JfP)
+ *
+ * The firmware file name for these will be
+ * ibt-<hw_variant>-<hw_revision>-<fw_revision>.sfi.
+ *
+ */
+ switch (ver.hw_variant) {
+ case 0x0b: /* SfP */
+ case 0x0c: /* WsP */
+ snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.sfi",
+ ver.hw_variant, le16_to_cpu(params.dev_revid));
+ break;
+ case 0x12: /* ThP */
+ snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u-%u.sfi",
+ ver.hw_variant, ver.hw_revision, ver.fw_revision);
+ break;
+ default:
+ bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
+ ver.hw_variant);
+ return -EINVAL;
+ }
+
+ err = request_firmware(&fw, fwname, &hdev->dev);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to load Intel firmware file (%d)",
+ err);
+ return err;
+ }
+
+ bt_dev_info(hdev, "Found device firmware: %s", fwname);
+
+ /* Save the DDC file name for later */
+ switch (ver.hw_variant) {
+ case 0x0b: /* SfP */
+ case 0x0c: /* WsP */
+ snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.ddc",
+ ver.hw_variant, le16_to_cpu(params.dev_revid));
+ break;
+ case 0x12: /* ThP */
+ snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u-%u.ddc",
+ ver.hw_variant, ver.hw_revision, ver.fw_revision);
+ break;
+ default:
+ bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
+ ver.hw_variant);
+ return -EINVAL;
+ }
+
+ if (fw->size < 644) {
+ bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
+ fw->size);
+ err = -EBADF;
+ goto done;
+ }
+
+ set_bit(STATE_DOWNLOADING, &intel->flags);
+
+ /* Start firmware downloading and get boot parameter */
+ err = btintel_download_firmware(hdev, &ver, fw, &boot_param);
+ if (err < 0)
+ goto done;
+
+ set_bit(STATE_FIRMWARE_LOADED, &intel->flags);
+
+ bt_dev_info(hdev, "Waiting for firmware download to complete");
+
+ /* Before switching the device into operational mode and with that
+ * booting the loaded firmware, wait for the bootloader notification
+ * that all fragments have been successfully received.
+ *
+ * When the event processing receives the notification, then the
+ * STATE_DOWNLOADING flag will be cleared.
+ *
+ * The firmware loading should not take longer than 5 seconds
+ * and thus just timeout if that happens and fail the setup
+ * of this device.
+ */
+ err = wait_on_bit_timeout(&intel->flags, STATE_DOWNLOADING,
+ TASK_INTERRUPTIBLE,
+ msecs_to_jiffies(5000));
+ if (err == -EINTR) {
+ bt_dev_err(hdev, "Firmware loading interrupted");
+ err = -EINTR;
+ goto done;
+ }
+
+ if (err) {
+ bt_dev_err(hdev, "Firmware loading timeout");
+ err = -ETIMEDOUT;
+ goto done;
+ }
+
+ if (test_bit(STATE_FIRMWARE_FAILED, &intel->flags)) {
+ bt_dev_err(hdev, "Firmware loading failed");
+ err = -ENOEXEC;
+ goto done;
+ }
+
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+ bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
+
+done:
+ release_firmware(fw);
+
+ /* Check if there was an error and if is not -EALREADY which means the
+ * firmware has already been loaded.
+ */
+ if (err < 0 && err != -EALREADY)
+ return err;
+
+ /* We need to restore the default speed before Intel reset */
+ if (speed_change) {
+ err = intel_set_baudrate(hu, init_speed);
+ if (err)
+ return err;
+ }
+
+ calltime = ktime_get();
+
+ set_bit(STATE_BOOTING, &intel->flags);
+
+ err = btintel_send_intel_reset(hdev, boot_param);
+ if (err)
+ return err;
+
+ /* The bootloader will not indicate when the device is ready. This
+ * is done by the operational firmware sending bootup notification.
+ *
+ * Booting into operational firmware should not take longer than
+ * 1 second. However if that happens, then just fail the setup
+ * since something went wrong.
+ */
+ bt_dev_info(hdev, "Waiting for device to boot");
+
+ err = intel_wait_booting(hu);
+ if (err)
+ return err;
+
+ clear_bit(STATE_BOOTING, &intel->flags);
+
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+ bt_dev_info(hdev, "Device booted in %llu usecs", duration);
+
+ /* Enable LPM if matching pdev with wakeup enabled, set TX active
+ * until further LPM TX notification.
+ */
+ mutex_lock(&intel_device_list_lock);
+ list_for_each_entry(idev, &intel_device_list, list) {
+ if (!hu->tty->dev)
+ break;
+ if (hu->tty->dev->parent == idev->pdev->dev.parent) {
+ if (device_may_wakeup(&idev->pdev->dev)) {
+ set_bit(STATE_LPM_ENABLED, &intel->flags);
+ set_bit(STATE_TX_ACTIVE, &intel->flags);
+ }
+ break;
+ }
+ }
+ mutex_unlock(&intel_device_list_lock);
+
+ /* Ignore errors, device can work without DDC parameters */
+ btintel_load_ddc_config(hdev, fwname);
+
+ skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+ kfree_skb(skb);
+
+ if (speed_change) {
+ err = intel_set_baudrate(hu, oper_speed);
+ if (err)
+ return err;
+ }
+
+ bt_dev_info(hdev, "Setup complete");
+
+ clear_bit(STATE_BOOTLOADER, &intel->flags);
+
+ return 0;
+}
+
+static int intel_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+ struct intel_data *intel = hu->priv;
+ struct hci_event_hdr *hdr;
+
+ if (!test_bit(STATE_BOOTLOADER, &intel->flags) &&
+ !test_bit(STATE_BOOTING, &intel->flags))
+ goto recv;
+
+ hdr = (void *)skb->data;
+
+ /* When the firmware loading completes the device sends
+ * out a vendor specific event indicating the result of
+ * the firmware loading.
+ */
+ if (skb->len == 7 && hdr->evt == 0xff && hdr->plen == 0x05 &&
+ skb->data[2] == 0x06) {
+ if (skb->data[3] != 0x00)
+ set_bit(STATE_FIRMWARE_FAILED, &intel->flags);
+
+ if (test_and_clear_bit(STATE_DOWNLOADING, &intel->flags) &&
+ test_bit(STATE_FIRMWARE_LOADED, &intel->flags))
+ wake_up_bit(&intel->flags, STATE_DOWNLOADING);
+
+ /* When switching to the operational firmware the device
+ * sends a vendor specific event indicating that the bootup
+ * completed.
+ */
+ } else if (skb->len == 9 && hdr->evt == 0xff && hdr->plen == 0x07 &&
+ skb->data[2] == 0x02) {
+ if (test_and_clear_bit(STATE_BOOTING, &intel->flags))
+ wake_up_bit(&intel->flags, STATE_BOOTING);
+ }
+recv:
+ return hci_recv_frame(hdev, skb);
+}
+
+static void intel_recv_lpm_notify(struct hci_dev *hdev, int value)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+ struct intel_data *intel = hu->priv;
+
+ bt_dev_dbg(hdev, "TX idle notification (%d)", value);
+
+ if (value) {
+ set_bit(STATE_TX_ACTIVE, &intel->flags);
+ schedule_work(&intel->busy_work);
+ } else {
+ clear_bit(STATE_TX_ACTIVE, &intel->flags);
+ }
+}
+
+static int intel_recv_lpm(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct hci_lpm_pkt *lpm = (void *)skb->data;
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+ struct intel_data *intel = hu->priv;
+
+ switch (lpm->opcode) {
+ case LPM_OP_TX_NOTIFY:
+ if (lpm->dlen < 1) {
+ bt_dev_err(hu->hdev, "Invalid LPM notification packet");
+ break;
+ }
+ intel_recv_lpm_notify(hdev, lpm->data[0]);
+ break;
+ case LPM_OP_SUSPEND_ACK:
+ set_bit(STATE_SUSPENDED, &intel->flags);
+ if (test_and_clear_bit(STATE_LPM_TRANSACTION, &intel->flags))
+ wake_up_bit(&intel->flags, STATE_LPM_TRANSACTION);
+ break;
+ case LPM_OP_RESUME_ACK:
+ clear_bit(STATE_SUSPENDED, &intel->flags);
+ if (test_and_clear_bit(STATE_LPM_TRANSACTION, &intel->flags))
+ wake_up_bit(&intel->flags, STATE_LPM_TRANSACTION);
+ break;
+ default:
+ bt_dev_err(hdev, "Unknown LPM opcode (%02x)", lpm->opcode);
+ break;
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+
+#define INTEL_RECV_LPM \
+ .type = HCI_LPM_PKT, \
+ .hlen = HCI_LPM_HDR_SIZE, \
+ .loff = 1, \
+ .lsize = 1, \
+ .maxlen = HCI_LPM_MAX_SIZE
+
+static const struct h4_recv_pkt intel_recv_pkts[] = {
+ { H4_RECV_ACL, .recv = hci_recv_frame },
+ { H4_RECV_SCO, .recv = hci_recv_frame },
+ { H4_RECV_EVENT, .recv = intel_recv_event },
+ { INTEL_RECV_LPM, .recv = intel_recv_lpm },
+};
+
+static int intel_recv(struct hci_uart *hu, const void *data, int count)
+{
+ struct intel_data *intel = hu->priv;
+
+ if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+ return -EUNATCH;
+
+ intel->rx_skb = h4_recv_buf(hu->hdev, intel->rx_skb, data, count,
+ intel_recv_pkts,
+ ARRAY_SIZE(intel_recv_pkts));
+ if (IS_ERR(intel->rx_skb)) {
+ int err = PTR_ERR(intel->rx_skb);
+ bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
+ intel->rx_skb = NULL;
+ return err;
+ }
+
+ return count;
+}
+
+static int intel_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+ struct intel_data *intel = hu->priv;
+ struct intel_device *idev;
+
+ BT_DBG("hu %p skb %p", hu, skb);
+
+ if (!hu->tty->dev)
+ goto out_enqueue;
+
+ /* Be sure our controller is resumed and potential LPM transaction
+ * completed before enqueuing any packet.
+ */
+ mutex_lock(&intel_device_list_lock);
+ list_for_each_entry(idev, &intel_device_list, list) {
+ if (hu->tty->dev->parent == idev->pdev->dev.parent) {
+ pm_runtime_get_sync(&idev->pdev->dev);
+ pm_runtime_mark_last_busy(&idev->pdev->dev);
+ pm_runtime_put_autosuspend(&idev->pdev->dev);
+ break;
+ }
+ }
+ mutex_unlock(&intel_device_list_lock);
+out_enqueue:
+ skb_queue_tail(&intel->txq, skb);
+
+ return 0;
+}
+
+static struct sk_buff *intel_dequeue(struct hci_uart *hu)
+{
+ struct intel_data *intel = hu->priv;
+ struct sk_buff *skb;
+
+ skb = skb_dequeue(&intel->txq);
+ if (!skb)
+ return skb;
+
+ if (test_bit(STATE_BOOTLOADER, &intel->flags) &&
+ (hci_skb_pkt_type(skb) == HCI_COMMAND_PKT)) {
+ struct hci_command_hdr *cmd = (void *)skb->data;
+ __u16 opcode = le16_to_cpu(cmd->opcode);
+
+ /* When the 0xfc01 command is issued to boot into
+ * the operational firmware, it will actually not
+ * send a command complete event. To keep the flow
+ * control working inject that event here.
+ */
+ if (opcode == 0xfc01)
+ inject_cmd_complete(hu->hdev, opcode);
+ }
+
+ /* Prepend skb with frame type */
+ memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+
+ return skb;
+}
+
+static const struct hci_uart_proto intel_proto = {
+ .id = HCI_UART_INTEL,
+ .name = "Intel",
+ .manufacturer = 2,
+ .init_speed = 115200,
+ .oper_speed = 3000000,
+ .open = intel_open,
+ .close = intel_close,
+ .flush = intel_flush,
+ .setup = intel_setup,
+ .set_baudrate = intel_set_baudrate,
+ .recv = intel_recv,
+ .enqueue = intel_enqueue,
+ .dequeue = intel_dequeue,
+};
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id intel_acpi_match[] = {
+ { "INT33E1", 0 },
+ { "INT33E3", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, intel_acpi_match);
+#endif
+
+#ifdef CONFIG_PM
+static int intel_suspend_device(struct device *dev)
+{
+ struct intel_device *idev = dev_get_drvdata(dev);
+
+ mutex_lock(&idev->hu_lock);
+ if (idev->hu)
+ intel_lpm_suspend(idev->hu);
+ mutex_unlock(&idev->hu_lock);
+
+ return 0;
+}
+
+static int intel_resume_device(struct device *dev)
+{
+ struct intel_device *idev = dev_get_drvdata(dev);
+
+ mutex_lock(&idev->hu_lock);
+ if (idev->hu)
+ intel_lpm_resume(idev->hu);
+ mutex_unlock(&idev->hu_lock);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int intel_suspend(struct device *dev)
+{
+ struct intel_device *idev = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(idev->irq);
+
+ return intel_suspend_device(dev);
+}
+
+static int intel_resume(struct device *dev)
+{
+ struct intel_device *idev = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(idev->irq);
+
+ return intel_resume_device(dev);
+}
+#endif
+
+static const struct dev_pm_ops intel_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(intel_suspend, intel_resume)
+ SET_RUNTIME_PM_OPS(intel_suspend_device, intel_resume_device, NULL)
+};
+
+static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
+static const struct acpi_gpio_params host_wake_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_hci_intel_gpios[] = {
+ { "reset-gpios", &reset_gpios, 1, ACPI_GPIO_QUIRK_ONLY_GPIOIO },
+ { "host-wake-gpios", &host_wake_gpios, 1, ACPI_GPIO_QUIRK_ONLY_GPIOIO },
+ { }
+};
+
+static int intel_probe(struct platform_device *pdev)
+{
+ struct intel_device *idev;
+ int ret;
+
+ idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
+ if (!idev)
+ return -ENOMEM;
+
+ mutex_init(&idev->hu_lock);
+
+ idev->pdev = pdev;
+
+ ret = devm_acpi_dev_add_driver_gpios(&pdev->dev, acpi_hci_intel_gpios);
+ if (ret)
+ dev_dbg(&pdev->dev, "Unable to add GPIO mapping table\n");
+
+ idev->reset = devm_gpiod_get(&pdev->dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(idev->reset)) {
+ dev_err(&pdev->dev, "Unable to retrieve gpio\n");
+ return PTR_ERR(idev->reset);
+ }
+
+ idev->irq = platform_get_irq(pdev, 0);
+ if (idev->irq < 0) {
+ struct gpio_desc *host_wake;
+
+ dev_err(&pdev->dev, "No IRQ, falling back to gpio-irq\n");
+
+ host_wake = devm_gpiod_get(&pdev->dev, "host-wake", GPIOD_IN);
+ if (IS_ERR(host_wake)) {
+ dev_err(&pdev->dev, "Unable to retrieve IRQ\n");
+ goto no_irq;
+ }
+
+ idev->irq = gpiod_to_irq(host_wake);
+ if (idev->irq < 0) {
+ dev_err(&pdev->dev, "No corresponding irq for gpio\n");
+ goto no_irq;
+ }
+ }
+
+ /* Only enable wake-up/irq when controller is powered */
+ device_set_wakeup_capable(&pdev->dev, true);
+ device_wakeup_disable(&pdev->dev);
+
+no_irq:
+ platform_set_drvdata(pdev, idev);
+
+ /* Place this instance on the device list */
+ mutex_lock(&intel_device_list_lock);
+ list_add_tail(&idev->list, &intel_device_list);
+ mutex_unlock(&intel_device_list_lock);
+
+ dev_info(&pdev->dev, "registered, gpio(%d)/irq(%d).\n",
+ desc_to_gpio(idev->reset), idev->irq);
+
+ return 0;
+}
+
+static int intel_remove(struct platform_device *pdev)
+{
+ struct intel_device *idev = platform_get_drvdata(pdev);
+
+ device_wakeup_disable(&pdev->dev);
+
+ mutex_lock(&intel_device_list_lock);
+ list_del(&idev->list);
+ mutex_unlock(&intel_device_list_lock);
+
+ dev_info(&pdev->dev, "unregistered.\n");
+
+ return 0;
+}
+
+static struct platform_driver intel_driver = {
+ .probe = intel_probe,
+ .remove = intel_remove,
+ .driver = {
+ .name = "hci_intel",
+ .acpi_match_table = ACPI_PTR(intel_acpi_match),
+ .pm = &intel_pm_ops,
+ },
+};
+
+int __init intel_init(void)
+{
+ int err;
+
+ err = platform_driver_register(&intel_driver);
+ if (err)
+ return err;
+
+ return hci_uart_register_proto(&intel_proto);
+}
+
+int __exit intel_deinit(void)
+{
+ platform_driver_unregister(&intel_driver);
+
+ return hci_uart_unregister_proto(&intel_proto);
+}