summaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth/hci_qca.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/bluetooth/hci_qca.c')
-rw-r--r--drivers/bluetooth/hci_qca.c68
1 files changed, 51 insertions, 17 deletions
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index bb69b7ea81..ce5c2aa743 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -7,7 +7,6 @@
*
* Copyright (C) 2007 Texas Instruments, Inc.
* Copyright (c) 2010, 2012, 2018 The Linux Foundation. All rights reserved.
- * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
*
* Acknowledgements:
* This file is based on hci_ll.c, which was...
@@ -226,6 +225,7 @@ struct qca_serdev {
struct qca_power *bt_power;
u32 init_speed;
u32 oper_speed;
+ bool bdaddr_property_broken;
const char *firmware_name;
};
@@ -1672,6 +1672,9 @@ static bool qca_wakeup(struct hci_dev *hdev)
struct hci_uart *hu = hci_get_drvdata(hdev);
bool wakeup;
+ if (!hu->serdev)
+ return true;
+
/* BT SoC attached through the serial bus is handled by the serdev driver.
* So we need to use the device handle of the serdev driver to get the
* status of device may wakeup.
@@ -1815,6 +1818,24 @@ static void hci_coredump_qca(struct hci_dev *hdev)
bt_dev_err(hdev, "%s: trigger crash failed (%d)", __func__, err);
}
+static int qca_get_data_path_id(struct hci_dev *hdev, __u8 *data_path_id)
+{
+ /* QCA uses 1 as non-HCI data path id for HFP */
+ *data_path_id = 1;
+ return 0;
+}
+
+static int qca_configure_hfp_offload(struct hci_dev *hdev)
+{
+ bt_dev_info(hdev, "HFP non-HCI data transport is supported");
+ hdev->get_data_path_id = qca_get_data_path_id;
+ /* Do not need to send HCI_Configure_Data_Path to configure non-HCI
+ * data transport path for QCA controllers, so set below field as NULL.
+ */
+ hdev->get_codec_config_data = NULL;
+ return 0;
+}
+
static int qca_setup(struct hci_uart *hu)
{
struct hci_dev *hdev = hu->hdev;
@@ -1825,6 +1846,7 @@ static int qca_setup(struct hci_uart *hu)
const char *firmware_name = qca_get_firmware_name(hu);
int ret;
struct qca_btsoc_version ver;
+ struct qca_serdev *qcadev;
const char *soc_name;
ret = qca_check_speeds(hu);
@@ -1886,16 +1908,11 @@ retry:
case QCA_WCN6750:
case QCA_WCN6855:
case QCA_WCN7850:
+ set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
- /* Set BDA quirk bit for reading BDA value from fwnode property
- * only if that property exist in DT.
- */
- if (fwnode_property_present(dev_fwnode(hdev->dev.parent), "local-bd-address")) {
- set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
- bt_dev_info(hdev, "setting quirk bit to read BDA from fwnode later");
- } else {
- bt_dev_dbg(hdev, "local-bd-address` is not present in the devicetree so not setting quirk bit for BDA");
- }
+ qcadev = serdev_device_get_drvdata(hu->serdev);
+ if (qcadev->bdaddr_property_broken)
+ set_bit(HCI_QUIRK_BDADDR_PROPERTY_BROKEN, &hdev->quirks);
hci_set_aosp_capable(hdev);
@@ -1943,8 +1960,10 @@ retry:
qca_debugfs_init(hdev);
hu->hdev->hw_error = qca_hw_error;
hu->hdev->cmd_timeout = qca_cmd_timeout;
- if (device_can_wakeup(hu->serdev->ctrl->dev.parent))
- hu->hdev->wakeup = qca_wakeup;
+ if (hu->serdev) {
+ if (device_can_wakeup(hu->serdev->ctrl->dev.parent))
+ hu->hdev->wakeup = qca_wakeup;
+ }
} else if (ret == -ENOENT) {
/* No patch/nvm-config found, run with original fw/config */
set_bit(QCA_ROM_FW, &qca->flags);
@@ -1979,6 +1998,10 @@ out:
hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
else
hu->hdev->set_bdaddr = qca_set_bdaddr;
+
+ if (soc_type == QCA_QCA2066)
+ qca_configure_hfp_offload(hdev);
+
qca->fw_version = le16_to_cpu(ver.patch_ver);
qca->controller_id = le16_to_cpu(ver.rom_ver);
hci_devcd_register(hdev, hci_coredump_qca, qca_dmp_hdr, NULL);
@@ -2273,6 +2296,9 @@ static int qca_serdev_probe(struct serdev_device *serdev)
if (!qcadev->oper_speed)
BT_DBG("UART will pick default operating speed");
+ qcadev->bdaddr_property_broken = device_property_read_bool(&serdev->dev,
+ "qcom,local-bd-address-broken");
+
if (data)
qcadev->btsoc_type = data->soc_type;
else
@@ -2308,16 +2334,21 @@ static int qca_serdev_probe(struct serdev_device *serdev)
(data->soc_type == QCA_WCN6750 ||
data->soc_type == QCA_WCN6855)) {
dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
- power_ctrl_enabled = false;
+ return PTR_ERR(qcadev->bt_en);
}
+ if (!qcadev->bt_en)
+ power_ctrl_enabled = false;
+
qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
GPIOD_IN);
if (IS_ERR(qcadev->sw_ctrl) &&
(data->soc_type == QCA_WCN6750 ||
data->soc_type == QCA_WCN6855 ||
- data->soc_type == QCA_WCN7850))
- dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
+ data->soc_type == QCA_WCN7850)) {
+ dev_err(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
+ return PTR_ERR(qcadev->sw_ctrl);
+ }
qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
if (IS_ERR(qcadev->susclk)) {
@@ -2336,10 +2367,13 @@ static int qca_serdev_probe(struct serdev_device *serdev)
qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
GPIOD_OUT_LOW);
if (IS_ERR(qcadev->bt_en)) {
- dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
- power_ctrl_enabled = false;
+ dev_err(&serdev->dev, "failed to acquire enable gpio\n");
+ return PTR_ERR(qcadev->bt_en);
}
+ if (!qcadev->bt_en)
+ power_ctrl_enabled = false;
+
qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
if (IS_ERR(qcadev->susclk)) {
dev_warn(&serdev->dev, "failed to acquire clk\n");