diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/char/Kconfig | 425 |
1 files changed, 425 insertions, 0 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig new file mode 100644 index 0000000000..625af75833 --- /dev/null +++ b/drivers/char/Kconfig @@ -0,0 +1,425 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Character device configuration +# + +menu "Character devices" + +source "drivers/tty/Kconfig" + +config TTY_PRINTK + tristate "TTY driver to output user messages via printk" + depends on EXPERT && TTY + default n + help + If you say Y here, the support for writing user messages (i.e. + console messages) via printk is available. + + The feature is useful to inline user messages with kernel + messages. + In order to use this feature, you should output user messages + to /dev/ttyprintk or redirect console to this TTY, or boot + the kernel with console=ttyprintk. + + If unsure, say N. + +config TTY_PRINTK_LEVEL + depends on TTY_PRINTK + int "ttyprintk log level (1-7)" + range 1 7 + default "6" + help + Printk log level to use for ttyprintk messages. + +config PRINTER + tristate "Parallel printer support" + depends on PARPORT + depends on HAS_IOPORT || PARPORT_NOT_PC + help + If you intend to attach a printer to the parallel port of your Linux + box (as opposed to using a serial printer; if the connector at the + printer has 9 or 25 holes ["female"], then it's serial), say Y. + Also read the Printing-HOWTO, available from + <https://www.tldp.org/docs.html#howto>. + + It is possible to share one parallel port among several devices + (e.g. printer and ZIP drive) and it is safe to compile the + corresponding drivers into the kernel. + + To compile this driver as a module, choose M here and read + <file:Documentation/admin-guide/parport.rst>. The module will be called lp. + + If you have several parallel ports, you can specify which ports to + use with the "lp" kernel command line option. (Try "man bootparam" + or see the documentation of your boot loader (lilo or loadlin) about + how to pass options to the kernel at boot time.) The syntax of the + "lp" command line option can be found in <file:drivers/char/lp.c>. + + If you have more than 8 printers, you need to increase the LP_NO + macro in lp.c and the PARPORT_MAX macro in parport.h. + +config LP_CONSOLE + bool "Support for console on line printer" + depends on PRINTER + help + If you want kernel messages to be printed out as they occur, you + can have a console on the printer. This option adds support for + doing that; to actually get it to happen you need to pass the + option "console=lp0" to the kernel at boot time. + + If the printer is out of paper (or off, or unplugged, or too + busy..) the kernel will stall until the printer is ready again. + By defining CONSOLE_LP_STRICT to 0 (at your own risk) you + can make the kernel continue when this happens, + but it'll lose the kernel messages. + + If unsure, say N. + +config PPDEV + tristate "Support for user-space parallel port device drivers" + depends on PARPORT + help + Saying Y to this adds support for /dev/parport device nodes. This + is needed for programs that want portable access to the parallel + port, for instance deviceid (which displays Plug-and-Play device + IDs). + + This is the parallel port equivalent of SCSI generic support (sg). + It is safe to say N to this -- it is not needed for normal printing + or parallel port CD-ROM/disk support. + + To compile this driver as a module, choose M here: the + module will be called ppdev. + + If unsure, say N. + +config VIRTIO_CONSOLE + tristate "Virtio console" + depends on TTY + select HVC_DRIVER + select VIRTIO + help + Virtio console for use with hypervisors. + + Also serves as a general-purpose serial device for data + transfer between the guest and host. Character devices at + /dev/vportNpn will be created when corresponding ports are + found, where N is the device number and n is the port number + within that device. If specified by the host, a sysfs + attribute called 'name' will be populated with a name for + the port which can be used by udev scripts to create a + symlink to the device. + +config IBM_BSR + tristate "IBM POWER Barrier Synchronization Register support" + depends on PPC_PSERIES + help + This devices exposes a hardware mechanism for fast synchronization + of threads across a large system which avoids bouncing a cacheline + between several cores on a system + +config POWERNV_OP_PANEL + tristate "IBM POWERNV Operator Panel Display support" + depends on PPC_POWERNV + default m + help + If you say Y here, a special character device node, /dev/op_panel, + will be created which exposes the operator panel display on IBM + Power Systems machines with FSPs. + + If you don't require access to the operator panel display from user + space, say N. + + If unsure, say M here to build it as a module called powernv-op-panel. + +source "drivers/char/ipmi/Kconfig" + +config DS1620 + tristate "NetWinder thermometer support" + depends on ARCH_NETWINDER + help + Say Y here to include support for the thermal management hardware + found in the NetWinder. This driver allows the user to control the + temperature set points and to read the current temperature. + + It is also possible to say M here to build it as a module (ds1620) + It is recommended to be used on a NetWinder, but it is not a + necessity. + +config NWBUTTON + tristate "NetWinder Button" + depends on ARCH_NETWINDER + help + If you say Y here and create a character device node /dev/nwbutton + with major and minor numbers 10 and 158 ("man mknod"), then every + time the orange button is pressed a number of times, the number of + times the button was pressed will be written to that device. + + This is most useful for applications, as yet unwritten, which + perform actions based on how many times the button is pressed in a + row. + + Do not hold the button down for too long, as the driver does not + alter the behaviour of the hardware reset circuitry attached to the + button; it will still execute a hard reset if the button is held + down for longer than approximately five seconds. + + To compile this driver as a module, choose M here: the + module will be called nwbutton. + + Most people will answer Y to this question and "Reboot Using Button" + below to be able to initiate a system shutdown from the button. + +config NWBUTTON_REBOOT + bool "Reboot Using Button" + depends on NWBUTTON + help + If you say Y here, then you will be able to initiate a system + shutdown and reboot by pressing the orange button a number of times. + The number of presses to initiate the shutdown is two by default, + but this can be altered by modifying the value of NUM_PRESSES_REBOOT + in nwbutton.h and recompiling the driver or, if you compile the + driver as a module, you can specify the number of presses at load + time with "insmod button reboot_count=<something>". + +config NWFLASH + tristate "NetWinder flash support" + depends on ARCH_NETWINDER + help + If you say Y here and create a character device /dev/flash with + major 10 and minor 160 you can manipulate the flash ROM containing + the NetWinder firmware. Be careful as accidentally overwriting the + flash contents can render your computer unbootable. On no account + allow random users access to this device. :-) + + To compile this driver as a module, choose M here: the + module will be called nwflash. + + If you're not sure, say N. + +source "drivers/char/hw_random/Kconfig" + +config DTLK + tristate "Double Talk PC internal speech card support" + depends on ISA + help + This driver is for the DoubleTalk PC, a speech synthesizer + manufactured by RC Systems (<https://www.rcsys.com/>). It is also + called the `internal DoubleTalk'. + + To compile this driver as a module, choose M here: the + module will be called dtlk. + +config XILINX_HWICAP + tristate "Xilinx HWICAP Support" + depends on MICROBLAZE + help + This option enables support for Xilinx Internal Configuration + Access Port (ICAP) driver. The ICAP is used on Xilinx Virtex + FPGA platforms to partially reconfigure the FPGA at runtime. + + If unsure, say N. + +config APPLICOM + tristate "Applicom intelligent fieldbus card support" + depends on PCI + help + This driver provides the kernel-side support for the intelligent + fieldbus cards made by Applicom International. More information + about these cards can be found on the WWW at the address + <https://www.applicom-int.com/>, or by email from David Woodhouse + <dwmw2@infradead.org>. + + To compile this driver as a module, choose M here: the + module will be called applicom. + + If unsure, say N. + +config SONYPI + tristate "Sony Vaio Programmable I/O Control Device support" + depends on X86_32 && PCI && INPUT + help + This driver enables access to the Sony Programmable I/O Control + Device which can be found in many (all ?) Sony Vaio laptops. + + If you have one of those laptops, read + <file:Documentation/admin-guide/laptops/sonypi.rst>, and say Y or M here. + + To compile this driver as a module, choose M here: the + module will be called sonypi. + +config MWAVE + tristate "ACP Modem (Mwave) support" + depends on X86 && TTY + select SERIAL_8250 + help + The ACP modem (Mwave) for Linux is a WinModem. It is composed of a + kernel driver and a user level application. Together these components + support direct attachment to public switched telephone networks (PSTNs) + and support selected world wide countries. + + This version of the ACP Modem driver supports the IBM Thinkpad 600E, + 600, and 770 that include on board ACP modem hardware. + + The modem also supports the standard communications port interface + (ttySx) and is compatible with the Hayes AT Command Set. + + The user level application needed to use this driver can be found at + the IBM Linux Technology Center (LTC) web site: + <http://www.ibm.com/linux/ltc/>. + + If you own one of the above IBM Thinkpads which has the Mwave chipset + in it, say Y. + + To compile this driver as a module, choose M here: the + module will be called mwave. + +config SCx200_GPIO + tristate "NatSemi SCx200 GPIO Support" + depends on SCx200 + select NSC_GPIO + help + Give userspace access to the GPIO pins on the National + Semiconductor SCx200 processors. + + If compiled as a module, it will be called scx200_gpio. + +config PC8736x_GPIO + tristate "NatSemi PC8736x GPIO Support" + depends on X86_32 && !UML + default SCx200_GPIO # mostly N + select NSC_GPIO # needed for support routines + help + Give userspace access to the GPIO pins on the National + Semiconductor PC-8736x (x=[03456]) SuperIO chip. The chip + has multiple functional units, inc several managed by + hwmon/pc87360 driver. Tested with PC-87366 + + If compiled as a module, it will be called pc8736x_gpio. + +config NSC_GPIO + tristate "NatSemi Base GPIO Support" + depends on X86_32 + # selected by SCx200_GPIO and PC8736x_GPIO + # what about 2 selectors differing: m != y + help + Common support used (and needed) by scx200_gpio and + pc8736x_gpio drivers. If those drivers are built as + modules, this one will be too, named nsc_gpio + +config DEVMEM + bool "/dev/mem virtual device support" + default y + help + Say Y here if you want to support the /dev/mem device. + The /dev/mem device is used to access areas of physical + memory. + When in doubt, say "Y". + +config NVRAM + tristate "/dev/nvram support" + depends on X86 || HAVE_ARCH_NVRAM_OPS + default M68K || PPC + help + If you say Y here and create a character special file /dev/nvram + with major number 10 and minor number 144 using mknod ("man mknod"), + you get read and write access to the non-volatile memory. + + /dev/nvram may be used to view settings in NVRAM or to change them + (with some utility). It could also be used to frequently + save a few bits of very important data that may not be lost over + power-off and for which writing to disk is too insecure. Note + however that most NVRAM space in a PC belongs to the BIOS and you + should NEVER idly tamper with it. See Ralf Brown's interrupt list + for a guide to the use of CMOS bytes by your BIOS. + + This memory is conventionally called "NVRAM" on PowerPC machines, + "CMOS RAM" on PCs, "NVRAM" on Ataris and "PRAM" on Macintoshes. + + To compile this driver as a module, choose M here: the + module will be called nvram. + +config DEVPORT + bool "/dev/port character device" + depends on HAS_IOPORT + default y + help + Say Y here if you want to support the /dev/port device. The /dev/port + device is similar to /dev/mem, but for I/O ports. + +config HPET + bool "HPET - High Precision Event Timer" if (X86 || IA64) + default n + depends on ACPI + help + If you say Y here, you will have a miscdevice named "/dev/hpet/". Each + open selects one of the timers supported by the HPET. The timers are + non-periodic and/or periodic. + +config HPET_MMAP + bool "Allow mmap of HPET" + default y + depends on HPET + help + If you say Y here, user applications will be able to mmap + the HPET registers. + +config HPET_MMAP_DEFAULT + bool "Enable HPET MMAP access by default" + default y + depends on HPET_MMAP + help + In some hardware implementations, the page containing HPET + registers may also contain other things that shouldn't be + exposed to the user. This option selects the default (if + kernel parameter hpet_mmap is not set) user access to the + registers for applications that require it. + +config HANGCHECK_TIMER + tristate "Hangcheck timer" + depends on X86 || IA64 || PPC64 || S390 + help + The hangcheck-timer module detects when the system has gone + out to lunch past a certain margin. It can reboot the system + or merely print a warning. + +config UV_MMTIMER + tristate "UV_MMTIMER Memory mapped RTC for SGI UV" + depends on X86_UV + default m + help + The uv_mmtimer device allows direct userspace access to the + UV system timer. + +source "drivers/char/tpm/Kconfig" + +config TELCLOCK + tristate "Telecom clock driver for ATCA SBC" + depends on X86 + default n + help + The telecom clock device is specific to the MPCBL0010 and MPCBL0050 + ATCA computers and allows direct userspace access to the + configuration of the telecom clock configuration settings. This + device is used for hardware synchronization across the ATCA backplane + fabric. Upon loading, the driver exports a sysfs directory, + /sys/devices/platform/telco_clock, with a number of files for + controlling the behavior of this hardware. + +source "drivers/s390/char/Kconfig" + +source "drivers/char/xillybus/Kconfig" + +config ADI + tristate "SPARC Privileged ADI driver" + depends on SPARC64 + default m + help + SPARC M7 and newer processors utilize ADI (Application Data + Integrity) to version and protect memory. This driver provides + read/write access to the ADI versions for privileged processes. + This feature is also known as MCD (Memory Corruption Detection) + and SSM (Silicon Secured Memory). Intended consumers of this + driver include crash and makedumpfile. + +endmenu |