diff options
Diffstat (limited to 'drivers/clk/clk-versaclock5.c')
| -rw-r--r-- | drivers/clk/clk-versaclock5.c | 1346 |
1 files changed, 1346 insertions, 0 deletions
diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c new file mode 100644 index 0000000000..17cbb30d20 --- /dev/null +++ b/drivers/clk/clk-versaclock5.c @@ -0,0 +1,1346 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Driver for IDT Versaclock 5 + * + * Copyright (C) 2017 Marek Vasut <marek.vasut@gmail.com> + */ + +/* + * Possible optimizations: + * - Use spread spectrum + * - Use integer divider in FOD if applicable + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#include <dt-bindings/clock/versaclock.h> + +/* VersaClock5 registers */ +#define VC5_OTP_CONTROL 0x00 + +/* Factory-reserved register block */ +#define VC5_RSVD_DEVICE_ID 0x01 +#define VC5_RSVD_ADC_GAIN_7_0 0x02 +#define VC5_RSVD_ADC_GAIN_15_8 0x03 +#define VC5_RSVD_ADC_OFFSET_7_0 0x04 +#define VC5_RSVD_ADC_OFFSET_15_8 0x05 +#define VC5_RSVD_TEMPY 0x06 +#define VC5_RSVD_OFFSET_TBIN 0x07 +#define VC5_RSVD_GAIN 0x08 +#define VC5_RSVD_TEST_NP 0x09 +#define VC5_RSVD_UNUSED 0x0a +#define VC5_RSVD_BANDGAP_TRIM_UP 0x0b +#define VC5_RSVD_BANDGAP_TRIM_DN 0x0c +#define VC5_RSVD_CLK_R_12_CLK_AMP_4 0x0d +#define VC5_RSVD_CLK_R_34_CLK_AMP_4 0x0e +#define VC5_RSVD_CLK_AMP_123 0x0f + +/* Configuration register block */ +#define VC5_PRIM_SRC_SHDN 0x10 +#define VC5_PRIM_SRC_SHDN_EN_XTAL BIT(7) +#define VC5_PRIM_SRC_SHDN_EN_CLKIN BIT(6) +#define VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ BIT(3) +#define VC5_PRIM_SRC_SHDN_SP BIT(1) +#define VC5_PRIM_SRC_SHDN_EN_GBL_SHDN BIT(0) + +#define VC5_VCO_BAND 0x11 +#define VC5_XTAL_X1_LOAD_CAP 0x12 +#define VC5_XTAL_X2_LOAD_CAP 0x13 +#define VC5_REF_DIVIDER 0x15 +#define VC5_REF_DIVIDER_SEL_PREDIV2 BIT(7) +#define VC5_REF_DIVIDER_REF_DIV(n) ((n) & 0x3f) + +#define VC5_VCO_CTRL_AND_PREDIV 0x16 +#define VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV BIT(7) + +#define VC5_FEEDBACK_INT_DIV 0x17 +#define VC5_FEEDBACK_INT_DIV_BITS 0x18 +#define VC5_FEEDBACK_FRAC_DIV(n) (0x19 + (n)) +#define VC5_RC_CONTROL0 0x1e +#define VC5_RC_CONTROL1 0x1f + +/* These registers are named "Unused Factory Reserved Registers" */ +#define VC5_RESERVED_X0(idx) (0x20 + ((idx) * 0x10)) +#define VC5_RESERVED_X0_BYPASS_SYNC BIT(7) /* bypass_sync<idx> bit */ + +/* Output divider control for divider 1,2,3,4 */ +#define VC5_OUT_DIV_CONTROL(idx) (0x21 + ((idx) * 0x10)) +#define VC5_OUT_DIV_CONTROL_RESET BIT(7) +#define VC5_OUT_DIV_CONTROL_SELB_NORM BIT(3) +#define VC5_OUT_DIV_CONTROL_SEL_EXT BIT(2) +#define VC5_OUT_DIV_CONTROL_INT_MODE BIT(1) +#define VC5_OUT_DIV_CONTROL_EN_FOD BIT(0) + +#define VC5_OUT_DIV_FRAC(idx, n) (0x22 + ((idx) * 0x10) + (n)) +#define VC5_OUT_DIV_FRAC4_OD_SCEE BIT(1) + +#define VC5_OUT_DIV_STEP_SPREAD(idx, n) (0x26 + ((idx) * 0x10) + (n)) +#define VC5_OUT_DIV_SPREAD_MOD(idx, n) (0x29 + ((idx) * 0x10) + (n)) +#define VC5_OUT_DIV_SKEW_INT(idx, n) (0x2b + ((idx) * 0x10) + (n)) +#define VC5_OUT_DIV_INT(idx, n) (0x2d + ((idx) * 0x10) + (n)) +#define VC5_OUT_DIV_SKEW_FRAC(idx) (0x2f + ((idx) * 0x10)) + +/* Clock control register for clock 1,2 */ +#define VC5_CLK_OUTPUT_CFG(idx, n) (0x60 + ((idx) * 0x2) + (n)) +#define VC5_CLK_OUTPUT_CFG0_CFG_SHIFT 5 +#define VC5_CLK_OUTPUT_CFG0_CFG_MASK GENMASK(7, VC5_CLK_OUTPUT_CFG0_CFG_SHIFT) + +#define VC5_CLK_OUTPUT_CFG0_CFG_LVPECL (VC5_LVPECL) +#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS (VC5_CMOS) +#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL33 (VC5_HCSL33) +#define VC5_CLK_OUTPUT_CFG0_CFG_LVDS (VC5_LVDS) +#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS2 (VC5_CMOS2) +#define VC5_CLK_OUTPUT_CFG0_CFG_CMOSD (VC5_CMOSD) +#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL25 (VC5_HCSL25) + +#define VC5_CLK_OUTPUT_CFG0_PWR_SHIFT 3 +#define VC5_CLK_OUTPUT_CFG0_PWR_MASK GENMASK(4, VC5_CLK_OUTPUT_CFG0_PWR_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_PWR_18 (0<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_PWR_25 (2<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_PWR_33 (3<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT 0 +#define VC5_CLK_OUTPUT_CFG0_SLEW_MASK GENMASK(1, VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_80 (0<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_85 (1<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_90 (2<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_100 (3<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) +#define VC5_CLK_OUTPUT_CFG1_EN_CLKBUF BIT(0) + +#define VC5_CLK_OE_SHDN 0x68 +#define VC5_CLK_OS_SHDN 0x69 + +#define VC5_GLOBAL_REGISTER 0x76 +#define VC5_GLOBAL_REGISTER_GLOBAL_RESET BIT(5) + +/* The minimum VCO frequency is 2.5 GHz. The maximum is variant specific. */ +#define VC5_PLL_VCO_MIN 2500000000UL + +/* VC5 Input mux settings */ +#define VC5_MUX_IN_XIN BIT(0) +#define VC5_MUX_IN_CLKIN BIT(1) + +/* Maximum number of clk_out supported by this driver */ +#define VC5_MAX_CLK_OUT_NUM 5 + +/* Maximum number of FODs supported by this driver */ +#define VC5_MAX_FOD_NUM 4 + +/* flags to describe chip features */ +/* chip has built-in oscilator */ +#define VC5_HAS_INTERNAL_XTAL BIT(0) +/* chip has PFD requency doubler */ +#define VC5_HAS_PFD_FREQ_DBL BIT(1) +/* chip has bits to disable FOD sync */ +#define VC5_HAS_BYPASS_SYNC_BIT BIT(2) + +/* Supported IDT VC5 models. */ +enum vc5_model { + IDT_VC5_5P49V5923, + IDT_VC5_5P49V5925, + IDT_VC5_5P49V5933, + IDT_VC5_5P49V5935, + IDT_VC6_5P49V60, + IDT_VC6_5P49V6901, + IDT_VC6_5P49V6965, + IDT_VC6_5P49V6975, +}; + +/* Structure to describe features of a particular VC5 model */ +struct vc5_chip_info { + const enum vc5_model model; + const unsigned int clk_fod_cnt; + const unsigned int clk_out_cnt; + const u32 flags; + const unsigned long vco_max; +}; + +struct vc5_driver_data; + +struct vc5_hw_data { + struct clk_hw hw; + struct vc5_driver_data *vc5; + u32 div_int; + u32 div_frc; + unsigned int num; +}; + +struct vc5_out_data { + struct clk_hw hw; + struct vc5_driver_data *vc5; + unsigned int num; + unsigned int clk_output_cfg0; + unsigned int clk_output_cfg0_mask; +}; + +struct vc5_driver_data { + struct i2c_client *client; + struct regmap *regmap; + const struct vc5_chip_info *chip_info; + + struct clk *pin_xin; + struct clk *pin_clkin; + unsigned char clk_mux_ins; + struct clk_hw clk_mux; + struct clk_hw clk_mul; + struct clk_hw clk_pfd; + struct vc5_hw_data clk_pll; + struct vc5_hw_data clk_fod[VC5_MAX_FOD_NUM]; + struct vc5_out_data clk_out[VC5_MAX_CLK_OUT_NUM]; +}; + +/* + * VersaClock5 i2c regmap + */ +static bool vc5_regmap_is_writeable(struct device *dev, unsigned int reg) +{ + /* Factory reserved regs, make them read-only */ + if (reg <= 0xf) + return false; + + /* Factory reserved regs, make them read-only */ + if (reg == 0x14 || reg == 0x1c || reg == 0x1d) + return false; + + return true; +} + +static const struct regmap_config vc5_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .max_register = 0x76, + .writeable_reg = vc5_regmap_is_writeable, +}; + +/* + * VersaClock5 input multiplexer between XTAL and CLKIN divider + */ +static unsigned char vc5_mux_get_parent(struct clk_hw *hw) +{ + struct vc5_driver_data *vc5 = + container_of(hw, struct vc5_driver_data, clk_mux); + const u8 mask = VC5_PRIM_SRC_SHDN_EN_XTAL | VC5_PRIM_SRC_SHDN_EN_CLKIN; + unsigned int src; + int ret; + + ret = regmap_read(vc5->regmap, VC5_PRIM_SRC_SHDN, &src); + if (ret) + return 0; + + src &= mask; + + if (src == VC5_PRIM_SRC_SHDN_EN_XTAL) + return 0; + + if (src == VC5_PRIM_SRC_SHDN_EN_CLKIN) + return 1; + + dev_warn(&vc5->client->dev, + "Invalid clock input configuration (%02x)\n", src); + return 0; +} + +static int vc5_mux_set_parent(struct clk_hw *hw, u8 index) +{ + struct vc5_driver_data *vc5 = + container_of(hw, struct vc5_driver_data, clk_mux); + const u8 mask = VC5_PRIM_SRC_SHDN_EN_XTAL | VC5_PRIM_SRC_SHDN_EN_CLKIN; + u8 src; + + if ((index > 1) || !vc5->clk_mux_ins) + return -EINVAL; + + if (vc5->clk_mux_ins == (VC5_MUX_IN_CLKIN | VC5_MUX_IN_XIN)) { + if (index == 0) + src = VC5_PRIM_SRC_SHDN_EN_XTAL; + if (index == 1) + src = VC5_PRIM_SRC_SHDN_EN_CLKIN; + } else { + if (index != 0) + return -EINVAL; + + if (vc5->clk_mux_ins == VC5_MUX_IN_XIN) + src = VC5_PRIM_SRC_SHDN_EN_XTAL; + else if (vc5->clk_mux_ins == VC5_MUX_IN_CLKIN) + src = VC5_PRIM_SRC_SHDN_EN_CLKIN; + else /* Invalid; should have been caught by vc5_probe() */ + return -EINVAL; + } + + return regmap_update_bits(vc5->regmap, VC5_PRIM_SRC_SHDN, mask, src); +} + +static const struct clk_ops vc5_mux_ops = { + .determine_rate = clk_hw_determine_rate_no_reparent, + .set_parent = vc5_mux_set_parent, + .get_parent = vc5_mux_get_parent, +}; + +static unsigned long vc5_dbl_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct vc5_driver_data *vc5 = + container_of(hw, struct vc5_driver_data, clk_mul); + unsigned int premul; + int ret; + + ret = regmap_read(vc5->regmap, VC5_PRIM_SRC_SHDN, &premul); + if (ret) + return 0; + + if (premul & VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ) + parent_rate *= 2; + + return parent_rate; +} + +static long vc5_dbl_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + if ((*parent_rate == rate) || ((*parent_rate * 2) == rate)) + return rate; + else + return -EINVAL; +} + +static int vc5_dbl_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct vc5_driver_data *vc5 = + container_of(hw, struct vc5_driver_data, clk_mul); + u32 mask; + + if ((parent_rate * 2) == rate) + mask = VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ; + else + mask = 0; + + return regmap_update_bits(vc5->regmap, VC5_PRIM_SRC_SHDN, + VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ, + mask); +} + +static const struct clk_ops vc5_dbl_ops = { + .recalc_rate = vc5_dbl_recalc_rate, + .round_rate = vc5_dbl_round_rate, + .set_rate = vc5_dbl_set_rate, +}; + +static unsigned long vc5_pfd_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct vc5_driver_data *vc5 = + container_of(hw, struct vc5_driver_data, clk_pfd); + unsigned int prediv, div; + int ret; + + ret = regmap_read(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV, &prediv); + if (ret) + return 0; + + /* The bypass_prediv is set, PLL fed from Ref_in directly. */ + if (prediv & VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV) + return parent_rate; + + ret = regmap_read(vc5->regmap, VC5_REF_DIVIDER, &div); + if (ret) + return 0; + + /* The Sel_prediv2 is set, PLL fed from prediv2 (Ref_in / 2) */ + if (div & VC5_REF_DIVIDER_SEL_PREDIV2) + return parent_rate / 2; + else + return parent_rate / VC5_REF_DIVIDER_REF_DIV(div); +} + +static long vc5_pfd_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + unsigned long idiv; + + /* PLL cannot operate with input clock above 50 MHz. */ + if (rate > 50000000) + return -EINVAL; + + /* CLKIN within range of PLL input, feed directly to PLL. */ + if (*parent_rate <= 50000000) + return *parent_rate; + + idiv = DIV_ROUND_UP(*parent_rate, rate); + if (idiv > 127) + return -EINVAL; + + return *parent_rate / idiv; +} + +static int vc5_pfd_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct vc5_driver_data *vc5 = + container_of(hw, struct vc5_driver_data, clk_pfd); + unsigned long idiv; + int ret; + u8 div; + + /* CLKIN within range of PLL input, feed directly to PLL. */ + if (parent_rate <= 50000000) { + ret = regmap_set_bits(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV, + VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV); + if (ret) + return ret; + + return regmap_update_bits(vc5->regmap, VC5_REF_DIVIDER, 0xff, 0x00); + } + + idiv = DIV_ROUND_UP(parent_rate, rate); + + /* We have dedicated div-2 predivider. */ + if (idiv == 2) + div = VC5_REF_DIVIDER_SEL_PREDIV2; + else + div = VC5_REF_DIVIDER_REF_DIV(idiv); + + ret = regmap_update_bits(vc5->regmap, VC5_REF_DIVIDER, 0xff, div); + if (ret) + return ret; + + return regmap_clear_bits(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV, + VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV); +} + +static const struct clk_ops vc5_pfd_ops = { + .recalc_rate = vc5_pfd_recalc_rate, + .round_rate = vc5_pfd_round_rate, + .set_rate = vc5_pfd_set_rate, +}; + +/* + * VersaClock5 PLL/VCO + */ +static unsigned long vc5_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + u32 div_int, div_frc; + u8 fb[5]; + + regmap_bulk_read(vc5->regmap, VC5_FEEDBACK_INT_DIV, fb, 5); + + div_int = (fb[0] << 4) | (fb[1] >> 4); + div_frc = (fb[2] << 16) | (fb[3] << 8) | fb[4]; + + /* The PLL divider has 12 integer bits and 24 fractional bits */ + return (parent_rate * div_int) + ((parent_rate * div_frc) >> 24); +} + +static long vc5_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + u32 div_int; + u64 div_frc; + + rate = clamp(rate, VC5_PLL_VCO_MIN, vc5->chip_info->vco_max); + + /* Determine integer part, which is 12 bit wide */ + div_int = rate / *parent_rate; + if (div_int > 0xfff) + rate = *parent_rate * 0xfff; + + /* Determine best fractional part, which is 24 bit wide */ + div_frc = rate % *parent_rate; + div_frc *= BIT(24) - 1; + do_div(div_frc, *parent_rate); + + hwdata->div_int = div_int; + hwdata->div_frc = (u32)div_frc; + + return (*parent_rate * div_int) + ((*parent_rate * div_frc) >> 24); +} + +static int vc5_pll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + u8 fb[5]; + + fb[0] = hwdata->div_int >> 4; + fb[1] = hwdata->div_int << 4; + fb[2] = hwdata->div_frc >> 16; + fb[3] = hwdata->div_frc >> 8; + fb[4] = hwdata->div_frc; + + return regmap_bulk_write(vc5->regmap, VC5_FEEDBACK_INT_DIV, fb, 5); +} + +static const struct clk_ops vc5_pll_ops = { + .recalc_rate = vc5_pll_recalc_rate, + .round_rate = vc5_pll_round_rate, + .set_rate = vc5_pll_set_rate, +}; + +static unsigned long vc5_fod_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + /* VCO frequency is divided by two before entering FOD */ + u32 f_in = parent_rate / 2; + u32 div_int, div_frc; + u8 od_int[2]; + u8 od_frc[4]; + + regmap_bulk_read(vc5->regmap, VC5_OUT_DIV_INT(hwdata->num, 0), + od_int, 2); + regmap_bulk_read(vc5->regmap, VC5_OUT_DIV_FRAC(hwdata->num, 0), + od_frc, 4); + + div_int = (od_int[0] << 4) | (od_int[1] >> 4); + div_frc = (od_frc[0] << 22) | (od_frc[1] << 14) | + (od_frc[2] << 6) | (od_frc[3] >> 2); + + /* Avoid division by zero if the output is not configured. */ + if (div_int == 0 && div_frc == 0) + return 0; + + /* The PLL divider has 12 integer bits and 30 fractional bits */ + return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc); +} + +static long vc5_fod_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + /* VCO frequency is divided by two before entering FOD */ + u32 f_in = *parent_rate / 2; + u32 div_int; + u64 div_frc; + + /* Determine integer part, which is 12 bit wide */ + div_int = f_in / rate; + /* + * WARNING: The clock chip does not output signal if the integer part + * of the divider is 0xfff and fractional part is non-zero. + * Clamp the divider at 0xffe to keep the code simple. + */ + if (div_int > 0xffe) { + div_int = 0xffe; + rate = f_in / div_int; + } + + /* Determine best fractional part, which is 30 bit wide */ + div_frc = f_in % rate; + div_frc <<= 24; + do_div(div_frc, rate); + + hwdata->div_int = div_int; + hwdata->div_frc = (u32)div_frc; + + return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc); +} + +static int vc5_fod_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + u8 data[14] = { + hwdata->div_frc >> 22, hwdata->div_frc >> 14, + hwdata->div_frc >> 6, hwdata->div_frc << 2, + 0, 0, 0, 0, 0, + 0, 0, + hwdata->div_int >> 4, hwdata->div_int << 4, + 0 + }; + int ret; + + ret = regmap_bulk_write(vc5->regmap, VC5_OUT_DIV_FRAC(hwdata->num, 0), + data, 14); + if (ret) + return ret; + + /* + * Toggle magic bit in undocumented register for unknown reason. + * This is what the IDT timing commander tool does and the chip + * datasheet somewhat implies this is needed, but the register + * and the bit is not documented. + */ + ret = regmap_clear_bits(vc5->regmap, VC5_GLOBAL_REGISTER, + VC5_GLOBAL_REGISTER_GLOBAL_RESET); + if (ret) + return ret; + + return regmap_set_bits(vc5->regmap, VC5_GLOBAL_REGISTER, + VC5_GLOBAL_REGISTER_GLOBAL_RESET); +} + +static const struct clk_ops vc5_fod_ops = { + .recalc_rate = vc5_fod_recalc_rate, + .round_rate = vc5_fod_round_rate, + .set_rate = vc5_fod_set_rate, +}; + +static int vc5_clk_out_prepare(struct clk_hw *hw) +{ + struct vc5_out_data *hwdata = container_of(hw, struct vc5_out_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + const u8 mask = VC5_OUT_DIV_CONTROL_SELB_NORM | + VC5_OUT_DIV_CONTROL_SEL_EXT | + VC5_OUT_DIV_CONTROL_EN_FOD; + unsigned int src; + int ret; + + /* + * When enabling a FOD, all currently enabled FODs are briefly + * stopped in order to synchronize all of them. This causes a clock + * disruption to any unrelated chips that might be already using + * other clock outputs. Bypass the sync feature to avoid the issue, + * which is possible on the VersaClock 6E family via reserved + * registers. + */ + if (vc5->chip_info->flags & VC5_HAS_BYPASS_SYNC_BIT) { + ret = regmap_set_bits(vc5->regmap, + VC5_RESERVED_X0(hwdata->num), + VC5_RESERVED_X0_BYPASS_SYNC); + if (ret) + return ret; + } + + /* + * If the input mux is disabled, enable it first and + * select source from matching FOD. + */ + ret = regmap_read(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num), &src); + if (ret) + return ret; + + if ((src & mask) == 0) { + src = VC5_OUT_DIV_CONTROL_RESET | VC5_OUT_DIV_CONTROL_EN_FOD; + ret = regmap_update_bits(vc5->regmap, + VC5_OUT_DIV_CONTROL(hwdata->num), + mask | VC5_OUT_DIV_CONTROL_RESET, src); + if (ret) + return ret; + } + + /* Enable the clock buffer */ + ret = regmap_set_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1), + VC5_CLK_OUTPUT_CFG1_EN_CLKBUF); + if (ret) + return ret; + + if (hwdata->clk_output_cfg0_mask) { + dev_dbg(&vc5->client->dev, "Update output %d mask 0x%0X val 0x%0X\n", + hwdata->num, hwdata->clk_output_cfg0_mask, + hwdata->clk_output_cfg0); + + ret = regmap_update_bits(vc5->regmap, + VC5_CLK_OUTPUT_CFG(hwdata->num, 0), + hwdata->clk_output_cfg0_mask, + hwdata->clk_output_cfg0); + if (ret) + return ret; + } + + return 0; +} + +static void vc5_clk_out_unprepare(struct clk_hw *hw) +{ + struct vc5_out_data *hwdata = container_of(hw, struct vc5_out_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + + /* Disable the clock buffer */ + regmap_clear_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1), + VC5_CLK_OUTPUT_CFG1_EN_CLKBUF); +} + +static unsigned char vc5_clk_out_get_parent(struct clk_hw *hw) +{ + struct vc5_out_data *hwdata = container_of(hw, struct vc5_out_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + const u8 mask = VC5_OUT_DIV_CONTROL_SELB_NORM | + VC5_OUT_DIV_CONTROL_SEL_EXT | + VC5_OUT_DIV_CONTROL_EN_FOD; + const u8 fodclkmask = VC5_OUT_DIV_CONTROL_SELB_NORM | + VC5_OUT_DIV_CONTROL_EN_FOD; + const u8 extclk = VC5_OUT_DIV_CONTROL_SELB_NORM | + VC5_OUT_DIV_CONTROL_SEL_EXT; + unsigned int src; + int ret; + + ret = regmap_read(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num), &src); + if (ret) + return 0; + + src &= mask; + + if (src == 0) /* Input mux set to DISABLED */ + return 0; + + if ((src & fodclkmask) == VC5_OUT_DIV_CONTROL_EN_FOD) + return 0; + + if (src == extclk) + return 1; + + dev_warn(&vc5->client->dev, + "Invalid clock output configuration (%02x)\n", src); + return 0; +} + +static int vc5_clk_out_set_parent(struct clk_hw *hw, u8 index) +{ + struct vc5_out_data *hwdata = container_of(hw, struct vc5_out_data, hw); + struct vc5_driver_data *vc5 = hwdata->vc5; + const u8 mask = VC5_OUT_DIV_CONTROL_RESET | + VC5_OUT_DIV_CONTROL_SELB_NORM | + VC5_OUT_DIV_CONTROL_SEL_EXT | + VC5_OUT_DIV_CONTROL_EN_FOD; + const u8 extclk = VC5_OUT_DIV_CONTROL_SELB_NORM | + VC5_OUT_DIV_CONTROL_SEL_EXT; + u8 src = VC5_OUT_DIV_CONTROL_RESET; + + if (index == 0) + src |= VC5_OUT_DIV_CONTROL_EN_FOD; + else + src |= extclk; + + return regmap_update_bits(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num), + mask, src); +} + +static const struct clk_ops vc5_clk_out_ops = { + .prepare = vc5_clk_out_prepare, + .unprepare = vc5_clk_out_unprepare, + .determine_rate = clk_hw_determine_rate_no_reparent, + .set_parent = vc5_clk_out_set_parent, + .get_parent = vc5_clk_out_get_parent, +}; + +static struct clk_hw *vc5_of_clk_get(struct of_phandle_args *clkspec, + void *data) +{ + struct vc5_driver_data *vc5 = data; + unsigned int idx = clkspec->args[0]; + + if (idx >= vc5->chip_info->clk_out_cnt) + return ERR_PTR(-EINVAL); + + return &vc5->clk_out[idx].hw; +} + +static int vc5_map_index_to_output(const enum vc5_model model, + const unsigned int n) +{ + switch (model) { + case IDT_VC5_5P49V5933: + return (n == 0) ? 0 : 3; + case IDT_VC5_5P49V5923: + case IDT_VC5_5P49V5925: + case IDT_VC5_5P49V5935: + case IDT_VC6_5P49V6901: + case IDT_VC6_5P49V6965: + case IDT_VC6_5P49V6975: + default: + return n; + } +} + +static int vc5_update_mode(struct device_node *np_output, + struct vc5_out_data *clk_out) +{ + u32 value; + + if (!of_property_read_u32(np_output, "idt,mode", &value)) { + clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_CFG_MASK; + switch (value) { + case VC5_CLK_OUTPUT_CFG0_CFG_LVPECL: + case VC5_CLK_OUTPUT_CFG0_CFG_CMOS: + case VC5_CLK_OUTPUT_CFG0_CFG_HCSL33: + case VC5_CLK_OUTPUT_CFG0_CFG_LVDS: + case VC5_CLK_OUTPUT_CFG0_CFG_CMOS2: + case VC5_CLK_OUTPUT_CFG0_CFG_CMOSD: + case VC5_CLK_OUTPUT_CFG0_CFG_HCSL25: + clk_out->clk_output_cfg0 |= + value << VC5_CLK_OUTPUT_CFG0_CFG_SHIFT; + break; + default: + return -EINVAL; + } + } + return 0; +} + +static int vc5_update_power(struct device_node *np_output, + struct vc5_out_data *clk_out) +{ + u32 value; + + if (!of_property_read_u32(np_output, "idt,voltage-microvolt", + &value)) { + clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_PWR_MASK; + switch (value) { + case 1800000: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_18; + break; + case 2500000: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_25; + break; + case 3300000: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_33; + break; + default: + return -EINVAL; + } + } + return 0; +} + +static int vc5_map_cap_value(u32 femtofarads) +{ + int mapped_value; + + /* + * The datasheet explicitly states 9000 - 25000 with 0.5pF + * steps, but the Programmer's guide shows the steps are 0.430pF. + * After getting feedback from Renesas, the .5pF steps were the + * goal, but 430nF was the actual values. + * Because of this, the actual range goes to 22760 instead of 25000 + */ + if (femtofarads < 9000 || femtofarads > 22760) + return -EINVAL; + + /* + * The Programmer's guide shows XTAL[5:0] but in reality, + * XTAL[0] and XTAL[1] are both LSB which makes the math + * strange. With clarfication from Renesas, setting the + * values should be simpler by ignoring XTAL[0] + */ + mapped_value = DIV_ROUND_CLOSEST(femtofarads - 9000, 430); + + /* + * Since the calculation ignores XTAL[0], there is one + * special case where mapped_value = 32. In reality, this means + * the real mapped value should be 111111b. In other cases, + * the mapped_value needs to be shifted 1 to the left. + */ + if (mapped_value > 31) + mapped_value = 0x3f; + else + mapped_value <<= 1; + + return mapped_value; +} +static int vc5_update_cap_load(struct device_node *node, struct vc5_driver_data *vc5) +{ + u32 value; + int mapped_value; + int ret; + + if (of_property_read_u32(node, "idt,xtal-load-femtofarads", &value)) + return 0; + + mapped_value = vc5_map_cap_value(value); + if (mapped_value < 0) + return mapped_value; + + /* + * The mapped_value is really the high 6 bits of + * VC5_XTAL_X1_LOAD_CAP and VC5_XTAL_X2_LOAD_CAP, so + * shift the value 2 places. + */ + ret = regmap_update_bits(vc5->regmap, VC5_XTAL_X1_LOAD_CAP, ~0x03, + mapped_value << 2); + if (ret) + return ret; + + return regmap_update_bits(vc5->regmap, VC5_XTAL_X2_LOAD_CAP, ~0x03, + mapped_value << 2); +} + +static int vc5_update_slew(struct device_node *np_output, + struct vc5_out_data *clk_out) +{ + u32 value; + + if (!of_property_read_u32(np_output, "idt,slew-percent", &value)) { + clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_SLEW_MASK; + switch (value) { + case 80: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_80; + break; + case 85: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_85; + break; + case 90: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_90; + break; + case 100: + clk_out->clk_output_cfg0 |= + VC5_CLK_OUTPUT_CFG0_SLEW_100; + break; + default: + return -EINVAL; + } + } + return 0; +} + +static int vc5_get_output_config(struct i2c_client *client, + struct vc5_out_data *clk_out) +{ + struct device_node *np_output; + char *child_name; + int ret = 0; + + child_name = kasprintf(GFP_KERNEL, "OUT%d", clk_out->num + 1); + if (!child_name) + return -ENOMEM; + + np_output = of_get_child_by_name(client->dev.of_node, child_name); + kfree(child_name); + if (!np_output) + return 0; + + ret = vc5_update_mode(np_output, clk_out); + if (ret) + goto output_error; + + ret = vc5_update_power(np_output, clk_out); + if (ret) + goto output_error; + + ret = vc5_update_slew(np_output, clk_out); + +output_error: + if (ret) { + dev_err(&client->dev, + "Invalid clock output configuration OUT%d\n", + clk_out->num + 1); + } + + of_node_put(np_output); + + return ret; +} + +static const struct of_device_id clk_vc5_of_match[]; + +static int vc5_probe(struct i2c_client *client) +{ + unsigned int oe, sd, src_mask = 0, src_val = 0; + struct vc5_driver_data *vc5; + struct clk_init_data init; + const char *parent_names[2]; + unsigned int n, idx = 0; + int ret; + + vc5 = devm_kzalloc(&client->dev, sizeof(*vc5), GFP_KERNEL); + if (!vc5) + return -ENOMEM; + + i2c_set_clientdata(client, vc5); + vc5->client = client; + vc5->chip_info = i2c_get_match_data(client); + + vc5->pin_xin = devm_clk_get(&client->dev, "xin"); + if (PTR_ERR(vc5->pin_xin) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + vc5->pin_clkin = devm_clk_get(&client->dev, "clkin"); + if (PTR_ERR(vc5->pin_clkin) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + vc5->regmap = devm_regmap_init_i2c(client, &vc5_regmap_config); + if (IS_ERR(vc5->regmap)) + return dev_err_probe(&client->dev, PTR_ERR(vc5->regmap), + "failed to allocate register map\n"); + + ret = of_property_read_u32(client->dev.of_node, "idt,shutdown", &sd); + if (!ret) { + src_mask |= VC5_PRIM_SRC_SHDN_EN_GBL_SHDN; + if (sd) + src_val |= VC5_PRIM_SRC_SHDN_EN_GBL_SHDN; + } else if (ret != -EINVAL) { + return dev_err_probe(&client->dev, ret, + "could not read idt,shutdown\n"); + } + + ret = of_property_read_u32(client->dev.of_node, + "idt,output-enable-active", &oe); + if (!ret) { + src_mask |= VC5_PRIM_SRC_SHDN_SP; + if (oe) + src_val |= VC5_PRIM_SRC_SHDN_SP; + } else if (ret != -EINVAL) { + return dev_err_probe(&client->dev, ret, + "could not read idt,output-enable-active\n"); + } + + ret = regmap_update_bits(vc5->regmap, VC5_PRIM_SRC_SHDN, src_mask, + src_val); + if (ret) + return ret; + + /* Register clock input mux */ + memset(&init, 0, sizeof(init)); + + if (!IS_ERR(vc5->pin_xin)) { + vc5->clk_mux_ins |= VC5_MUX_IN_XIN; + parent_names[init.num_parents++] = __clk_get_name(vc5->pin_xin); + } else if (vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL) { + vc5->pin_xin = clk_register_fixed_rate(&client->dev, + "internal-xtal", NULL, + 0, 25000000); + if (IS_ERR(vc5->pin_xin)) + return PTR_ERR(vc5->pin_xin); + vc5->clk_mux_ins |= VC5_MUX_IN_XIN; + parent_names[init.num_parents++] = __clk_get_name(vc5->pin_xin); + } + + if (!IS_ERR(vc5->pin_clkin)) { + vc5->clk_mux_ins |= VC5_MUX_IN_CLKIN; + parent_names[init.num_parents++] = + __clk_get_name(vc5->pin_clkin); + } + + if (!init.num_parents) + return dev_err_probe(&client->dev, -EINVAL, + "no input clock specified!\n"); + + /* Configure Optional Loading Capacitance for external XTAL */ + if (!(vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL)) { + ret = vc5_update_cap_load(client->dev.of_node, vc5); + if (ret) + goto err_clk_register; + } + + init.name = kasprintf(GFP_KERNEL, "%pOFn.mux", client->dev.of_node); + if (!init.name) { + ret = -ENOMEM; + goto err_clk; + } + + init.ops = &vc5_mux_ops; + init.flags = 0; + init.parent_names = parent_names; + vc5->clk_mux.init = &init; + ret = devm_clk_hw_register(&client->dev, &vc5->clk_mux); + if (ret) + goto err_clk_register; + kfree(init.name); /* clock framework made a copy of the name */ + + if (vc5->chip_info->flags & VC5_HAS_PFD_FREQ_DBL) { + /* Register frequency doubler */ + memset(&init, 0, sizeof(init)); + init.name = kasprintf(GFP_KERNEL, "%pOFn.dbl", + client->dev.of_node); + if (!init.name) { + ret = -ENOMEM; + goto err_clk; + } + init.ops = &vc5_dbl_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = parent_names; + parent_names[0] = clk_hw_get_name(&vc5->clk_mux); + init.num_parents = 1; + vc5->clk_mul.init = &init; + ret = devm_clk_hw_register(&client->dev, &vc5->clk_mul); + if (ret) + goto err_clk_register; + kfree(init.name); /* clock framework made a copy of the name */ + } + + /* Register PFD */ + memset(&init, 0, sizeof(init)); + init.name = kasprintf(GFP_KERNEL, "%pOFn.pfd", client->dev.of_node); + if (!init.name) { + ret = -ENOMEM; + goto err_clk; + } + init.ops = &vc5_pfd_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = parent_names; + if (vc5->chip_info->flags & VC5_HAS_PFD_FREQ_DBL) + parent_names[0] = clk_hw_get_name(&vc5->clk_mul); + else + parent_names[0] = clk_hw_get_name(&vc5->clk_mux); + init.num_parents = 1; + vc5->clk_pfd.init = &init; + ret = devm_clk_hw_register(&client->dev, &vc5->clk_pfd); + if (ret) + goto err_clk_register; + kfree(init.name); /* clock framework made a copy of the name */ + + /* Register PLL */ + memset(&init, 0, sizeof(init)); + init.name = kasprintf(GFP_KERNEL, "%pOFn.pll", client->dev.of_node); + if (!init.name) { + ret = -ENOMEM; + goto err_clk; + } + init.ops = &vc5_pll_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = parent_names; + parent_names[0] = clk_hw_get_name(&vc5->clk_pfd); + init.num_parents = 1; + vc5->clk_pll.num = 0; + vc5->clk_pll.vc5 = vc5; + vc5->clk_pll.hw.init = &init; + ret = devm_clk_hw_register(&client->dev, &vc5->clk_pll.hw); + if (ret) + goto err_clk_register; + kfree(init.name); /* clock framework made a copy of the name */ + + /* Register FODs */ + for (n = 0; n < vc5->chip_info->clk_fod_cnt; n++) { + idx = vc5_map_index_to_output(vc5->chip_info->model, n); + memset(&init, 0, sizeof(init)); + init.name = kasprintf(GFP_KERNEL, "%pOFn.fod%d", + client->dev.of_node, idx); + if (!init.name) { + ret = -ENOMEM; + goto err_clk; + } + init.ops = &vc5_fod_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = parent_names; + parent_names[0] = clk_hw_get_name(&vc5->clk_pll.hw); + init.num_parents = 1; + vc5->clk_fod[n].num = idx; + vc5->clk_fod[n].vc5 = vc5; + vc5->clk_fod[n].hw.init = &init; + ret = devm_clk_hw_register(&client->dev, &vc5->clk_fod[n].hw); + if (ret) + goto err_clk_register; + kfree(init.name); /* clock framework made a copy of the name */ + } + + /* Register MUX-connected OUT0_I2C_SELB output */ + memset(&init, 0, sizeof(init)); + init.name = kasprintf(GFP_KERNEL, "%pOFn.out0_sel_i2cb", + client->dev.of_node); + if (!init.name) { + ret = -ENOMEM; + goto err_clk; + } + init.ops = &vc5_clk_out_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = parent_names; + parent_names[0] = clk_hw_get_name(&vc5->clk_mux); + init.num_parents = 1; + vc5->clk_out[0].num = idx; + vc5->clk_out[0].vc5 = vc5; + vc5->clk_out[0].hw.init = &init; + ret = devm_clk_hw_register(&client->dev, &vc5->clk_out[0].hw); + if (ret) + goto err_clk_register; + kfree(init.name); /* clock framework made a copy of the name */ + + /* Register FOD-connected OUTx outputs */ + for (n = 1; n < vc5->chip_info->clk_out_cnt; n++) { + idx = vc5_map_index_to_output(vc5->chip_info->model, n - 1); + parent_names[0] = clk_hw_get_name(&vc5->clk_fod[idx].hw); + if (n == 1) + parent_names[1] = clk_hw_get_name(&vc5->clk_mux); + else + parent_names[1] = + clk_hw_get_name(&vc5->clk_out[n - 1].hw); + + memset(&init, 0, sizeof(init)); + init.name = kasprintf(GFP_KERNEL, "%pOFn.out%d", + client->dev.of_node, idx + 1); + if (!init.name) { + ret = -ENOMEM; + goto err_clk; + } + init.ops = &vc5_clk_out_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = parent_names; + init.num_parents = 2; + vc5->clk_out[n].num = idx; + vc5->clk_out[n].vc5 = vc5; + vc5->clk_out[n].hw.init = &init; + ret = devm_clk_hw_register(&client->dev, &vc5->clk_out[n].hw); + if (ret) + goto err_clk_register; + kfree(init.name); /* clock framework made a copy of the name */ + + /* Fetch Clock Output configuration from DT (if specified) */ + ret = vc5_get_output_config(client, &vc5->clk_out[n]); + if (ret) + goto err_clk; + } + + ret = of_clk_add_hw_provider(client->dev.of_node, vc5_of_clk_get, vc5); + if (ret) { + dev_err_probe(&client->dev, ret, + "unable to add clk provider\n"); + goto err_clk; + } + + return 0; + +err_clk_register: + dev_err_probe(&client->dev, ret, + "unable to register %s\n", init.name); + kfree(init.name); /* clock framework made a copy of the name */ +err_clk: + if (vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL) + clk_unregister_fixed_rate(vc5->pin_xin); + return ret; +} + +static void vc5_remove(struct i2c_client *client) +{ + struct vc5_driver_data *vc5 = i2c_get_clientdata(client); + + of_clk_del_provider(client->dev.of_node); + + if (vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL) + clk_unregister_fixed_rate(vc5->pin_xin); +} + +static int __maybe_unused vc5_suspend(struct device *dev) +{ + struct vc5_driver_data *vc5 = dev_get_drvdata(dev); + + regcache_cache_only(vc5->regmap, true); + regcache_mark_dirty(vc5->regmap); + + return 0; +} + +static int __maybe_unused vc5_resume(struct device *dev) +{ + struct vc5_driver_data *vc5 = dev_get_drvdata(dev); + int ret; + + regcache_cache_only(vc5->regmap, false); + ret = regcache_sync(vc5->regmap); + if (ret) + dev_err(dev, "Failed to restore register map: %d\n", ret); + return ret; +} + +static const struct vc5_chip_info idt_5p49v5923_info = { + .model = IDT_VC5_5P49V5923, + .clk_fod_cnt = 2, + .clk_out_cnt = 3, + .flags = 0, + .vco_max = 3000000000UL, +}; + +static const struct vc5_chip_info idt_5p49v5925_info = { + .model = IDT_VC5_5P49V5925, + .clk_fod_cnt = 4, + .clk_out_cnt = 5, + .flags = 0, + .vco_max = 3000000000UL, +}; + +static const struct vc5_chip_info idt_5p49v5933_info = { + .model = IDT_VC5_5P49V5933, + .clk_fod_cnt = 2, + .clk_out_cnt = 3, + .flags = VC5_HAS_INTERNAL_XTAL, + .vco_max = 3000000000UL, +}; + +static const struct vc5_chip_info idt_5p49v5935_info = { + .model = IDT_VC5_5P49V5935, + .clk_fod_cnt = 4, + .clk_out_cnt = 5, + .flags = VC5_HAS_INTERNAL_XTAL, + .vco_max = 3000000000UL, +}; + +static const struct vc5_chip_info idt_5p49v60_info = { + .model = IDT_VC6_5P49V60, + .clk_fod_cnt = 4, + .clk_out_cnt = 5, + .flags = VC5_HAS_PFD_FREQ_DBL | VC5_HAS_BYPASS_SYNC_BIT, + .vco_max = 2700000000UL, +}; + +static const struct vc5_chip_info idt_5p49v6901_info = { + .model = IDT_VC6_5P49V6901, + .clk_fod_cnt = 4, + .clk_out_cnt = 5, + .flags = VC5_HAS_PFD_FREQ_DBL | VC5_HAS_BYPASS_SYNC_BIT, + .vco_max = 3000000000UL, +}; + +static const struct vc5_chip_info idt_5p49v6965_info = { + .model = IDT_VC6_5P49V6965, + .clk_fod_cnt = 4, + .clk_out_cnt = 5, + .flags = VC5_HAS_BYPASS_SYNC_BIT, + .vco_max = 3000000000UL, +}; + +static const struct vc5_chip_info idt_5p49v6975_info = { + .model = IDT_VC6_5P49V6975, + .clk_fod_cnt = 4, + .clk_out_cnt = 5, + .flags = VC5_HAS_BYPASS_SYNC_BIT | VC5_HAS_INTERNAL_XTAL, + .vco_max = 3000000000UL, +}; + +static const struct i2c_device_id vc5_id[] = { + { "5p49v5923", .driver_data = (kernel_ulong_t)&idt_5p49v5923_info }, + { "5p49v5925", .driver_data = (kernel_ulong_t)&idt_5p49v5925_info }, + { "5p49v5933", .driver_data = (kernel_ulong_t)&idt_5p49v5933_info }, + { "5p49v5935", .driver_data = (kernel_ulong_t)&idt_5p49v5935_info }, + { "5p49v60", .driver_data = (kernel_ulong_t)&idt_5p49v60_info }, + { "5p49v6901", .driver_data = (kernel_ulong_t)&idt_5p49v6901_info }, + { "5p49v6965", .driver_data = (kernel_ulong_t)&idt_5p49v6965_info }, + { "5p49v6975", .driver_data = (kernel_ulong_t)&idt_5p49v6975_info }, + { } +}; +MODULE_DEVICE_TABLE(i2c, vc5_id); + +static const struct of_device_id clk_vc5_of_match[] = { + { .compatible = "idt,5p49v5923", .data = &idt_5p49v5923_info }, + { .compatible = "idt,5p49v5925", .data = &idt_5p49v5925_info }, + { .compatible = "idt,5p49v5933", .data = &idt_5p49v5933_info }, + { .compatible = "idt,5p49v5935", .data = &idt_5p49v5935_info }, + { .compatible = "idt,5p49v60", .data = &idt_5p49v60_info }, + { .compatible = "idt,5p49v6901", .data = &idt_5p49v6901_info }, + { .compatible = "idt,5p49v6965", .data = &idt_5p49v6965_info }, + { .compatible = "idt,5p49v6975", .data = &idt_5p49v6975_info }, + { }, +}; +MODULE_DEVICE_TABLE(of, clk_vc5_of_match); + +static SIMPLE_DEV_PM_OPS(vc5_pm_ops, vc5_suspend, vc5_resume); + +static struct i2c_driver vc5_driver = { + .driver = { + .name = "vc5", + .pm = &vc5_pm_ops, + .of_match_table = clk_vc5_of_match, + }, + .probe = vc5_probe, + .remove = vc5_remove, + .id_table = vc5_id, +}; +module_i2c_driver(vc5_driver); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("IDT VersaClock 5 driver"); +MODULE_LICENSE("GPL"); |