summaryrefslogtreecommitdiffstats
path: root/drivers/clk/keystone
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/clk/keystone')
-rw-r--r--drivers/clk/keystone/Kconfig36
-rw-r--r--drivers/clk/keystone/Makefile4
-rw-r--r--drivers/clk/keystone/gate.c269
-rw-r--r--drivers/clk/keystone/pll.c344
-rw-r--r--drivers/clk/keystone/sci-clk.c711
-rw-r--r--drivers/clk/keystone/syscon-clk.c234
6 files changed, 1598 insertions, 0 deletions
diff --git a/drivers/clk/keystone/Kconfig b/drivers/clk/keystone/Kconfig
new file mode 100644
index 0000000000..e64d672604
--- /dev/null
+++ b/drivers/clk/keystone/Kconfig
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config COMMON_CLK_KEYSTONE
+ tristate "Clock drivers for Keystone based SOCs"
+ depends on (ARCH_KEYSTONE || COMPILE_TEST) && OF
+ help
+ Supports clock drivers for Keystone based SOCs. These SOCs have local
+ a power sleep control module that gate the clock to the IPs and PLLs.
+
+config TI_SCI_CLK
+ tristate "TI System Control Interface clock drivers"
+ depends on (ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST) && OF
+ depends on TI_SCI_PROTOCOL
+ default ARCH_KEYSTONE
+ help
+ This adds the clock driver support over TI System Control Interface.
+ If you wish to use clock resources from the PMMC firmware, say Y.
+ Otherwise, say N.
+
+config TI_SCI_CLK_PROBE_FROM_FW
+ bool "Probe available clocks from firmware"
+ depends on TI_SCI_CLK
+ default n
+ help
+ Forces the TI SCI clock driver to probe available clocks from the
+ firmware. By default, only the used clocks are probed from DT.
+ This is mostly only useful for debugging purposes, and will
+ increase the boot time of the device. If you want the clocks probed
+ from firmware, say Y. Otherwise, say N.
+
+config TI_SYSCON_CLK
+ tristate "Syscon based clock driver for K2/K3 SoCs"
+ depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+ default ARCH_KEYSTONE || ARCH_K3
+ help
+ This adds clock driver support for syscon based gate
+ clocks on TI's K2 and K3 SoCs.
diff --git a/drivers/clk/keystone/Makefile b/drivers/clk/keystone/Makefile
new file mode 100644
index 0000000000..0e426e648f
--- /dev/null
+++ b/drivers/clk/keystone/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_COMMON_CLK_KEYSTONE) += pll.o gate.o
+obj-$(CONFIG_TI_SCI_CLK) += sci-clk.o
+obj-$(CONFIG_TI_SYSCON_CLK) += syscon-clk.o
diff --git a/drivers/clk/keystone/gate.c b/drivers/clk/keystone/gate.c
new file mode 100644
index 0000000000..13ea047489
--- /dev/null
+++ b/drivers/clk/keystone/gate.c
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Clock driver for Keystone 2 based devices
+ *
+ * Copyright (C) 2013 Texas Instruments.
+ * Murali Karicheri <m-karicheri2@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ */
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/module.h>
+
+/* PSC register offsets */
+#define PTCMD 0x120
+#define PTSTAT 0x128
+#define PDSTAT 0x200
+#define PDCTL 0x300
+#define MDSTAT 0x800
+#define MDCTL 0xa00
+
+/* PSC module states */
+#define PSC_STATE_SWRSTDISABLE 0
+#define PSC_STATE_SYNCRST 1
+#define PSC_STATE_DISABLE 2
+#define PSC_STATE_ENABLE 3
+
+#define MDSTAT_STATE_MASK 0x3f
+#define MDSTAT_MCKOUT BIT(12)
+#define PDSTAT_STATE_MASK 0x1f
+#define MDCTL_FORCE BIT(31)
+#define MDCTL_LRESET BIT(8)
+#define PDCTL_NEXT BIT(0)
+
+/* Maximum timeout to bail out state transition for module */
+#define STATE_TRANS_MAX_COUNT 0xffff
+
+static void __iomem *domain_transition_base;
+
+/**
+ * struct clk_psc_data - PSC data
+ * @control_base: Base address for a PSC control
+ * @domain_base: Base address for a PSC domain
+ * @domain_id: PSC domain id number
+ */
+struct clk_psc_data {
+ void __iomem *control_base;
+ void __iomem *domain_base;
+ u32 domain_id;
+};
+
+/**
+ * struct clk_psc - PSC clock structure
+ * @hw: clk_hw for the psc
+ * @psc_data: PSC driver specific data
+ * @lock: Spinlock used by the driver
+ */
+struct clk_psc {
+ struct clk_hw hw;
+ struct clk_psc_data *psc_data;
+ spinlock_t *lock;
+};
+
+static DEFINE_SPINLOCK(psc_lock);
+
+#define to_clk_psc(_hw) container_of(_hw, struct clk_psc, hw)
+
+static void psc_config(void __iomem *control_base, void __iomem *domain_base,
+ u32 next_state, u32 domain_id)
+{
+ u32 ptcmd, pdstat, pdctl, mdstat, mdctl, ptstat;
+ u32 count = STATE_TRANS_MAX_COUNT;
+
+ mdctl = readl(control_base + MDCTL);
+ mdctl &= ~MDSTAT_STATE_MASK;
+ mdctl |= next_state;
+ /* For disable, we always put the module in local reset */
+ if (next_state == PSC_STATE_DISABLE)
+ mdctl &= ~MDCTL_LRESET;
+ writel(mdctl, control_base + MDCTL);
+
+ pdstat = readl(domain_base + PDSTAT);
+ if (!(pdstat & PDSTAT_STATE_MASK)) {
+ pdctl = readl(domain_base + PDCTL);
+ pdctl |= PDCTL_NEXT;
+ writel(pdctl, domain_base + PDCTL);
+ }
+
+ ptcmd = 1 << domain_id;
+ writel(ptcmd, domain_transition_base + PTCMD);
+ do {
+ ptstat = readl(domain_transition_base + PTSTAT);
+ } while (((ptstat >> domain_id) & 1) && count--);
+
+ count = STATE_TRANS_MAX_COUNT;
+ do {
+ mdstat = readl(control_base + MDSTAT);
+ } while (!((mdstat & MDSTAT_STATE_MASK) == next_state) && count--);
+}
+
+static int keystone_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_psc *psc = to_clk_psc(hw);
+ struct clk_psc_data *data = psc->psc_data;
+ u32 mdstat = readl(data->control_base + MDSTAT);
+
+ return (mdstat & MDSTAT_MCKOUT) ? 1 : 0;
+}
+
+static int keystone_clk_enable(struct clk_hw *hw)
+{
+ struct clk_psc *psc = to_clk_psc(hw);
+ struct clk_psc_data *data = psc->psc_data;
+ unsigned long flags = 0;
+
+ if (psc->lock)
+ spin_lock_irqsave(psc->lock, flags);
+
+ psc_config(data->control_base, data->domain_base,
+ PSC_STATE_ENABLE, data->domain_id);
+
+ if (psc->lock)
+ spin_unlock_irqrestore(psc->lock, flags);
+
+ return 0;
+}
+
+static void keystone_clk_disable(struct clk_hw *hw)
+{
+ struct clk_psc *psc = to_clk_psc(hw);
+ struct clk_psc_data *data = psc->psc_data;
+ unsigned long flags = 0;
+
+ if (psc->lock)
+ spin_lock_irqsave(psc->lock, flags);
+
+ psc_config(data->control_base, data->domain_base,
+ PSC_STATE_DISABLE, data->domain_id);
+
+ if (psc->lock)
+ spin_unlock_irqrestore(psc->lock, flags);
+}
+
+static const struct clk_ops clk_psc_ops = {
+ .enable = keystone_clk_enable,
+ .disable = keystone_clk_disable,
+ .is_enabled = keystone_clk_is_enabled,
+};
+
+/**
+ * clk_register_psc - register psc clock
+ * @dev: device that is registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @psc_data: platform data to configure this clock
+ * @lock: spinlock used by this clock
+ */
+static struct clk *clk_register_psc(struct device *dev,
+ const char *name,
+ const char *parent_name,
+ struct clk_psc_data *psc_data,
+ spinlock_t *lock)
+{
+ struct clk_init_data init;
+ struct clk_psc *psc;
+ struct clk *clk;
+
+ psc = kzalloc(sizeof(*psc), GFP_KERNEL);
+ if (!psc)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &clk_psc_ops;
+ init.flags = 0;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ psc->psc_data = psc_data;
+ psc->lock = lock;
+ psc->hw.init = &init;
+
+ clk = clk_register(NULL, &psc->hw);
+ if (IS_ERR(clk))
+ kfree(psc);
+
+ return clk;
+}
+
+/**
+ * of_psc_clk_init - initialize psc clock through DT
+ * @node: device tree node for this clock
+ * @lock: spinlock used by this clock
+ */
+static void __init of_psc_clk_init(struct device_node *node, spinlock_t *lock)
+{
+ const char *clk_name = node->name;
+ const char *parent_name;
+ struct clk_psc_data *data;
+ struct clk *clk;
+ int i;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ pr_err("%s: Out of memory\n", __func__);
+ return;
+ }
+
+ i = of_property_match_string(node, "reg-names", "control");
+ data->control_base = of_iomap(node, i);
+ if (!data->control_base) {
+ pr_err("%s: control ioremap failed\n", __func__);
+ goto out;
+ }
+
+ i = of_property_match_string(node, "reg-names", "domain");
+ data->domain_base = of_iomap(node, i);
+ if (!data->domain_base) {
+ pr_err("%s: domain ioremap failed\n", __func__);
+ goto unmap_ctrl;
+ }
+
+ of_property_read_u32(node, "domain-id", &data->domain_id);
+
+ /* Domain transition registers at fixed address space of domain_id 0 */
+ if (!domain_transition_base && !data->domain_id)
+ domain_transition_base = data->domain_base;
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+ parent_name = of_clk_get_parent_name(node, 0);
+ if (!parent_name) {
+ pr_err("%s: Parent clock not found\n", __func__);
+ goto unmap_domain;
+ }
+
+ clk = clk_register_psc(NULL, clk_name, parent_name, data, lock);
+ if (!IS_ERR(clk)) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ return;
+ }
+
+ pr_err("%s: error registering clk %pOFn\n", __func__, node);
+
+unmap_domain:
+ iounmap(data->domain_base);
+unmap_ctrl:
+ iounmap(data->control_base);
+out:
+ kfree(data);
+ return;
+}
+
+/**
+ * of_keystone_psc_clk_init - initialize psc clock through DT
+ * @node: device tree node for this clock
+ */
+static void __init of_keystone_psc_clk_init(struct device_node *node)
+{
+ of_psc_clk_init(node, &psc_lock);
+}
+CLK_OF_DECLARE(keystone_gate_clk, "ti,keystone,psc-clock",
+ of_keystone_psc_clk_init);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Clock driver for Keystone 2 based devices");
+MODULE_AUTHOR("Murali Karicheri <m-karicheri2@ti.com>");
+MODULE_AUTHOR("Santosh Shilimkar <santosh.shilimkar@ti.com>");
diff --git a/drivers/clk/keystone/pll.c b/drivers/clk/keystone/pll.c
new file mode 100644
index 0000000000..6bbdd4705d
--- /dev/null
+++ b/drivers/clk/keystone/pll.c
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PLL clock driver for Keystone devices
+ *
+ * Copyright (C) 2013 Texas Instruments Inc.
+ * Murali Karicheri <m-karicheri2@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ */
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/module.h>
+
+#define PLLM_LOW_MASK 0x3f
+#define PLLM_HIGH_MASK 0x7ffc0
+#define MAIN_PLLM_HIGH_MASK 0x7f000
+#define PLLM_HIGH_SHIFT 6
+#define PLLD_MASK 0x3f
+#define CLKOD_MASK 0x780000
+#define CLKOD_SHIFT 19
+
+/**
+ * struct clk_pll_data - pll data structure
+ * @has_pllctrl: If set to non zero, lower 6 bits of multiplier is in pllm
+ * register of pll controller, else it is in the pll_ctrl0((bit 11-6)
+ * @phy_pllm: Physical address of PLLM in pll controller. Used when
+ * has_pllctrl is non zero.
+ * @phy_pll_ctl0: Physical address of PLL ctrl0. This could be that of
+ * Main PLL or any other PLLs in the device such as ARM PLL, DDR PLL
+ * or PA PLL available on keystone2. These PLLs are controlled by
+ * this register. Main PLL is controlled by a PLL controller.
+ * @pllm: PLL register map address for multiplier bits
+ * @pllod: PLL register map address for post divider bits
+ * @pll_ctl0: PLL controller map address
+ * @pllm_lower_mask: multiplier lower mask
+ * @pllm_upper_mask: multiplier upper mask
+ * @pllm_upper_shift: multiplier upper shift
+ * @plld_mask: divider mask
+ * @clkod_mask: output divider mask
+ * @clkod_shift: output divider shift
+ * @plld_mask: divider mask
+ * @postdiv: Fixed post divider
+ */
+struct clk_pll_data {
+ bool has_pllctrl;
+ u32 phy_pllm;
+ u32 phy_pll_ctl0;
+ void __iomem *pllm;
+ void __iomem *pllod;
+ void __iomem *pll_ctl0;
+ u32 pllm_lower_mask;
+ u32 pllm_upper_mask;
+ u32 pllm_upper_shift;
+ u32 plld_mask;
+ u32 clkod_mask;
+ u32 clkod_shift;
+ u32 postdiv;
+};
+
+/**
+ * struct clk_pll - Main pll clock
+ * @hw: clk_hw for the pll
+ * @pll_data: PLL driver specific data
+ */
+struct clk_pll {
+ struct clk_hw hw;
+ struct clk_pll_data *pll_data;
+};
+
+#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw)
+
+static unsigned long clk_pllclk_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ struct clk_pll_data *pll_data = pll->pll_data;
+ unsigned long rate = parent_rate;
+ u32 mult = 0, prediv, postdiv, val;
+
+ /*
+ * get bits 0-5 of multiplier from pllctrl PLLM register
+ * if has_pllctrl is non zero
+ */
+ if (pll_data->has_pllctrl) {
+ val = readl(pll_data->pllm);
+ mult = (val & pll_data->pllm_lower_mask);
+ }
+
+ /* bit6-12 of PLLM is in Main PLL control register */
+ val = readl(pll_data->pll_ctl0);
+ mult |= ((val & pll_data->pllm_upper_mask)
+ >> pll_data->pllm_upper_shift);
+ prediv = (val & pll_data->plld_mask);
+
+ if (!pll_data->has_pllctrl)
+ /* read post divider from od bits*/
+ postdiv = ((val & pll_data->clkod_mask) >>
+ pll_data->clkod_shift) + 1;
+ else if (pll_data->pllod) {
+ postdiv = readl(pll_data->pllod);
+ postdiv = ((postdiv & pll_data->clkod_mask) >>
+ pll_data->clkod_shift) + 1;
+ } else
+ postdiv = pll_data->postdiv;
+
+ rate /= (prediv + 1);
+ rate = (rate * (mult + 1));
+ rate /= postdiv;
+
+ return rate;
+}
+
+static const struct clk_ops clk_pll_ops = {
+ .recalc_rate = clk_pllclk_recalc,
+};
+
+static struct clk *clk_register_pll(struct device *dev,
+ const char *name,
+ const char *parent_name,
+ struct clk_pll_data *pll_data)
+{
+ struct clk_init_data init;
+ struct clk_pll *pll;
+ struct clk *clk;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &clk_pll_ops;
+ init.flags = 0;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ pll->pll_data = pll_data;
+ pll->hw.init = &init;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk))
+ goto out;
+
+ return clk;
+out:
+ kfree(pll);
+ return NULL;
+}
+
+/**
+ * _of_pll_clk_init - PLL initialisation via DT
+ * @node: device tree node for this clock
+ * @pllctrl: If true, lower 6 bits of multiplier is in pllm register of
+ * pll controller, else it is in the control register0(bit 11-6)
+ */
+static void __init _of_pll_clk_init(struct device_node *node, bool pllctrl)
+{
+ struct clk_pll_data *pll_data;
+ const char *parent_name;
+ struct clk *clk;
+ int i;
+
+ pll_data = kzalloc(sizeof(*pll_data), GFP_KERNEL);
+ if (!pll_data) {
+ pr_err("%s: Out of memory\n", __func__);
+ return;
+ }
+
+ parent_name = of_clk_get_parent_name(node, 0);
+ if (of_property_read_u32(node, "fixed-postdiv", &pll_data->postdiv)) {
+ /* assume the PLL has output divider register bits */
+ pll_data->clkod_mask = CLKOD_MASK;
+ pll_data->clkod_shift = CLKOD_SHIFT;
+
+ /*
+ * Check if there is an post-divider register. If not
+ * assume od bits are part of control register.
+ */
+ i = of_property_match_string(node, "reg-names",
+ "post-divider");
+ pll_data->pllod = of_iomap(node, i);
+ }
+
+ i = of_property_match_string(node, "reg-names", "control");
+ pll_data->pll_ctl0 = of_iomap(node, i);
+ if (!pll_data->pll_ctl0) {
+ pr_err("%s: ioremap failed\n", __func__);
+ iounmap(pll_data->pllod);
+ goto out;
+ }
+
+ pll_data->pllm_lower_mask = PLLM_LOW_MASK;
+ pll_data->pllm_upper_shift = PLLM_HIGH_SHIFT;
+ pll_data->plld_mask = PLLD_MASK;
+ pll_data->has_pllctrl = pllctrl;
+ if (!pll_data->has_pllctrl) {
+ pll_data->pllm_upper_mask = PLLM_HIGH_MASK;
+ } else {
+ pll_data->pllm_upper_mask = MAIN_PLLM_HIGH_MASK;
+ i = of_property_match_string(node, "reg-names", "multiplier");
+ pll_data->pllm = of_iomap(node, i);
+ if (!pll_data->pllm) {
+ iounmap(pll_data->pll_ctl0);
+ iounmap(pll_data->pllod);
+ goto out;
+ }
+ }
+
+ clk = clk_register_pll(NULL, node->name, parent_name, pll_data);
+ if (!IS_ERR_OR_NULL(clk)) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ return;
+ }
+
+out:
+ pr_err("%s: error initializing pll %pOFn\n", __func__, node);
+ kfree(pll_data);
+}
+
+/**
+ * of_keystone_pll_clk_init - PLL initialisation DT wrapper
+ * @node: device tree node for this clock
+ */
+static void __init of_keystone_pll_clk_init(struct device_node *node)
+{
+ _of_pll_clk_init(node, false);
+}
+CLK_OF_DECLARE(keystone_pll_clock, "ti,keystone,pll-clock",
+ of_keystone_pll_clk_init);
+
+/**
+ * of_keystone_main_pll_clk_init - Main PLL initialisation DT wrapper
+ * @node: device tree node for this clock
+ */
+static void __init of_keystone_main_pll_clk_init(struct device_node *node)
+{
+ _of_pll_clk_init(node, true);
+}
+CLK_OF_DECLARE(keystone_main_pll_clock, "ti,keystone,main-pll-clock",
+ of_keystone_main_pll_clk_init);
+
+/**
+ * of_pll_div_clk_init - PLL divider setup function
+ * @node: device tree node for this clock
+ */
+static void __init of_pll_div_clk_init(struct device_node *node)
+{
+ const char *parent_name;
+ void __iomem *reg;
+ u32 shift, mask;
+ struct clk *clk;
+ const char *clk_name = node->name;
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+ reg = of_iomap(node, 0);
+ if (!reg) {
+ pr_err("%s: ioremap failed\n", __func__);
+ return;
+ }
+
+ parent_name = of_clk_get_parent_name(node, 0);
+ if (!parent_name) {
+ pr_err("%s: missing parent clock\n", __func__);
+ iounmap(reg);
+ return;
+ }
+
+ if (of_property_read_u32(node, "bit-shift", &shift)) {
+ pr_err("%s: missing 'shift' property\n", __func__);
+ iounmap(reg);
+ return;
+ }
+
+ if (of_property_read_u32(node, "bit-mask", &mask)) {
+ pr_err("%s: missing 'bit-mask' property\n", __func__);
+ iounmap(reg);
+ return;
+ }
+
+ clk = clk_register_divider(NULL, clk_name, parent_name, 0, reg, shift,
+ mask, 0, NULL);
+ if (IS_ERR(clk)) {
+ pr_err("%s: error registering divider %s\n", __func__, clk_name);
+ iounmap(reg);
+ return;
+ }
+
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+CLK_OF_DECLARE(pll_divider_clock, "ti,keystone,pll-divider-clock", of_pll_div_clk_init);
+
+/**
+ * of_pll_mux_clk_init - PLL mux setup function
+ * @node: device tree node for this clock
+ */
+static void __init of_pll_mux_clk_init(struct device_node *node)
+{
+ void __iomem *reg;
+ u32 shift, mask;
+ struct clk *clk;
+ const char *parents[2];
+ const char *clk_name = node->name;
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+ reg = of_iomap(node, 0);
+ if (!reg) {
+ pr_err("%s: ioremap failed\n", __func__);
+ return;
+ }
+
+ of_clk_parent_fill(node, parents, 2);
+ if (!parents[0] || !parents[1]) {
+ pr_err("%s: missing parent clocks\n", __func__);
+ return;
+ }
+
+ if (of_property_read_u32(node, "bit-shift", &shift)) {
+ pr_err("%s: missing 'shift' property\n", __func__);
+ return;
+ }
+
+ if (of_property_read_u32(node, "bit-mask", &mask)) {
+ pr_err("%s: missing 'bit-mask' property\n", __func__);
+ return;
+ }
+
+ clk = clk_register_mux(NULL, clk_name, (const char **)&parents,
+ ARRAY_SIZE(parents) , 0, reg, shift, mask,
+ 0, NULL);
+ if (IS_ERR(clk)) {
+ pr_err("%s: error registering mux %s\n", __func__, clk_name);
+ return;
+ }
+
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+CLK_OF_DECLARE(pll_mux_clock, "ti,keystone,pll-mux-clock", of_pll_mux_clk_init);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PLL clock driver for Keystone devices");
+MODULE_AUTHOR("Murali Karicheri <m-karicheri2@ti.com>");
+MODULE_AUTHOR("Santosh Shilimkar <santosh.shilimkar@ti.com>");
diff --git a/drivers/clk/keystone/sci-clk.c b/drivers/clk/keystone/sci-clk.c
new file mode 100644
index 0000000000..35fe197dd3
--- /dev/null
+++ b/drivers/clk/keystone/sci-clk.c
@@ -0,0 +1,711 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SCI Clock driver for keystone based devices
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
+ * Tero Kristo <t-kristo@ti.com>
+ */
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+#include <linux/bsearch.h>
+#include <linux/list_sort.h>
+
+#define SCI_CLK_SSC_ENABLE BIT(0)
+#define SCI_CLK_ALLOW_FREQ_CHANGE BIT(1)
+#define SCI_CLK_INPUT_TERMINATION BIT(2)
+
+/**
+ * struct sci_clk_provider - TI SCI clock provider representation
+ * @sci: Handle to the System Control Interface protocol handler
+ * @ops: Pointer to the SCI ops to be used by the clocks
+ * @dev: Device pointer for the clock provider
+ * @clocks: Clocks array for this device
+ * @num_clocks: Total number of clocks for this provider
+ */
+struct sci_clk_provider {
+ const struct ti_sci_handle *sci;
+ const struct ti_sci_clk_ops *ops;
+ struct device *dev;
+ struct sci_clk **clocks;
+ int num_clocks;
+};
+
+/**
+ * struct sci_clk - TI SCI clock representation
+ * @hw: Hardware clock cookie for common clock framework
+ * @dev_id: Device index
+ * @clk_id: Clock index
+ * @num_parents: Number of parents for this clock
+ * @provider: Master clock provider
+ * @flags: Flags for the clock
+ * @node: Link for handling clocks probed via DT
+ * @cached_req: Cached requested freq for determine rate calls
+ * @cached_res: Cached result freq for determine rate calls
+ */
+struct sci_clk {
+ struct clk_hw hw;
+ u16 dev_id;
+ u32 clk_id;
+ u32 num_parents;
+ struct sci_clk_provider *provider;
+ u8 flags;
+ struct list_head node;
+ unsigned long cached_req;
+ unsigned long cached_res;
+};
+
+#define to_sci_clk(_hw) container_of(_hw, struct sci_clk, hw)
+
+/**
+ * sci_clk_prepare - Prepare (enable) a TI SCI clock
+ * @hw: clock to prepare
+ *
+ * Prepares a clock to be actively used. Returns the SCI protocol status.
+ */
+static int sci_clk_prepare(struct clk_hw *hw)
+{
+ struct sci_clk *clk = to_sci_clk(hw);
+ bool enable_ssc = clk->flags & SCI_CLK_SSC_ENABLE;
+ bool allow_freq_change = clk->flags & SCI_CLK_ALLOW_FREQ_CHANGE;
+ bool input_termination = clk->flags & SCI_CLK_INPUT_TERMINATION;
+
+ return clk->provider->ops->get_clock(clk->provider->sci, clk->dev_id,
+ clk->clk_id, enable_ssc,
+ allow_freq_change,
+ input_termination);
+}
+
+/**
+ * sci_clk_unprepare - Un-prepares (disables) a TI SCI clock
+ * @hw: clock to unprepare
+ *
+ * Un-prepares a clock from active state.
+ */
+static void sci_clk_unprepare(struct clk_hw *hw)
+{
+ struct sci_clk *clk = to_sci_clk(hw);
+ int ret;
+
+ ret = clk->provider->ops->put_clock(clk->provider->sci, clk->dev_id,
+ clk->clk_id);
+ if (ret)
+ dev_err(clk->provider->dev,
+ "unprepare failed for dev=%d, clk=%d, ret=%d\n",
+ clk->dev_id, clk->clk_id, ret);
+}
+
+/**
+ * sci_clk_is_prepared - Check if a TI SCI clock is prepared or not
+ * @hw: clock to check status for
+ *
+ * Checks if a clock is prepared (enabled) in hardware. Returns non-zero
+ * value if clock is enabled, zero otherwise.
+ */
+static int sci_clk_is_prepared(struct clk_hw *hw)
+{
+ struct sci_clk *clk = to_sci_clk(hw);
+ bool req_state, current_state;
+ int ret;
+
+ ret = clk->provider->ops->is_on(clk->provider->sci, clk->dev_id,
+ clk->clk_id, &req_state,
+ &current_state);
+ if (ret) {
+ dev_err(clk->provider->dev,
+ "is_prepared failed for dev=%d, clk=%d, ret=%d\n",
+ clk->dev_id, clk->clk_id, ret);
+ return 0;
+ }
+
+ return req_state;
+}
+
+/**
+ * sci_clk_recalc_rate - Get clock rate for a TI SCI clock
+ * @hw: clock to get rate for
+ * @parent_rate: parent rate provided by common clock framework, not used
+ *
+ * Gets the current clock rate of a TI SCI clock. Returns the current
+ * clock rate, or zero in failure.
+ */
+static unsigned long sci_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct sci_clk *clk = to_sci_clk(hw);
+ u64 freq;
+ int ret;
+
+ ret = clk->provider->ops->get_freq(clk->provider->sci, clk->dev_id,
+ clk->clk_id, &freq);
+ if (ret) {
+ dev_err(clk->provider->dev,
+ "recalc-rate failed for dev=%d, clk=%d, ret=%d\n",
+ clk->dev_id, clk->clk_id, ret);
+ return 0;
+ }
+
+ return freq;
+}
+
+/**
+ * sci_clk_determine_rate - Determines a clock rate a clock can be set to
+ * @hw: clock to change rate for
+ * @req: requested rate configuration for the clock
+ *
+ * Determines a suitable clock rate and parent for a TI SCI clock.
+ * The parent handling is un-used, as generally the parent clock rates
+ * are not known by the kernel; instead these are internally handled
+ * by the firmware. Returns 0 on success, negative error value on failure.
+ */
+static int sci_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct sci_clk *clk = to_sci_clk(hw);
+ int ret;
+ u64 new_rate;
+
+ if (clk->cached_req && clk->cached_req == req->rate) {
+ req->rate = clk->cached_res;
+ return 0;
+ }
+
+ ret = clk->provider->ops->get_best_match_freq(clk->provider->sci,
+ clk->dev_id,
+ clk->clk_id,
+ req->min_rate,
+ req->rate,
+ req->max_rate,
+ &new_rate);
+ if (ret) {
+ dev_err(clk->provider->dev,
+ "determine-rate failed for dev=%d, clk=%d, ret=%d\n",
+ clk->dev_id, clk->clk_id, ret);
+ return ret;
+ }
+
+ clk->cached_req = req->rate;
+ clk->cached_res = new_rate;
+
+ req->rate = new_rate;
+
+ return 0;
+}
+
+/**
+ * sci_clk_set_rate - Set rate for a TI SCI clock
+ * @hw: clock to change rate for
+ * @rate: target rate for the clock
+ * @parent_rate: rate of the clock parent, not used for TI SCI clocks
+ *
+ * Sets a clock frequency for a TI SCI clock. Returns the TI SCI
+ * protocol status.
+ */
+static int sci_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct sci_clk *clk = to_sci_clk(hw);
+
+ return clk->provider->ops->set_freq(clk->provider->sci, clk->dev_id,
+ clk->clk_id, rate / 10 * 9, rate,
+ rate / 10 * 11);
+}
+
+/**
+ * sci_clk_get_parent - Get the current parent of a TI SCI clock
+ * @hw: clock to get parent for
+ *
+ * Returns the index of the currently selected parent for a TI SCI clock.
+ */
+static u8 sci_clk_get_parent(struct clk_hw *hw)
+{
+ struct sci_clk *clk = to_sci_clk(hw);
+ u32 parent_id = 0;
+ int ret;
+
+ ret = clk->provider->ops->get_parent(clk->provider->sci, clk->dev_id,
+ clk->clk_id, (void *)&parent_id);
+ if (ret) {
+ dev_err(clk->provider->dev,
+ "get-parent failed for dev=%d, clk=%d, ret=%d\n",
+ clk->dev_id, clk->clk_id, ret);
+ return 0;
+ }
+
+ parent_id = parent_id - clk->clk_id - 1;
+
+ return (u8)parent_id;
+}
+
+/**
+ * sci_clk_set_parent - Set the parent of a TI SCI clock
+ * @hw: clock to set parent for
+ * @index: new parent index for the clock
+ *
+ * Sets the parent of a TI SCI clock. Return TI SCI protocol status.
+ */
+static int sci_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct sci_clk *clk = to_sci_clk(hw);
+
+ clk->cached_req = 0;
+
+ return clk->provider->ops->set_parent(clk->provider->sci, clk->dev_id,
+ clk->clk_id,
+ index + 1 + clk->clk_id);
+}
+
+static const struct clk_ops sci_clk_ops = {
+ .prepare = sci_clk_prepare,
+ .unprepare = sci_clk_unprepare,
+ .is_prepared = sci_clk_is_prepared,
+ .recalc_rate = sci_clk_recalc_rate,
+ .determine_rate = sci_clk_determine_rate,
+ .set_rate = sci_clk_set_rate,
+ .get_parent = sci_clk_get_parent,
+ .set_parent = sci_clk_set_parent,
+};
+
+/**
+ * _sci_clk_get - Gets a handle for an SCI clock
+ * @provider: Handle to SCI clock provider
+ * @sci_clk: Handle to the SCI clock to populate
+ *
+ * Gets a handle to an existing TI SCI hw clock, or builds a new clock
+ * entry and registers it with the common clock framework. Called from
+ * the common clock framework, when a corresponding of_clk_get call is
+ * executed, or recursively from itself when parsing parent clocks.
+ * Returns 0 on success, negative error code on failure.
+ */
+static int _sci_clk_build(struct sci_clk_provider *provider,
+ struct sci_clk *sci_clk)
+{
+ struct clk_init_data init = { NULL };
+ char *name = NULL;
+ char **parent_names = NULL;
+ int i;
+ int ret = 0;
+
+ name = kasprintf(GFP_KERNEL, "clk:%d:%d", sci_clk->dev_id,
+ sci_clk->clk_id);
+ if (!name)
+ return -ENOMEM;
+
+ init.name = name;
+
+ /*
+ * From kernel point of view, we only care about a clocks parents,
+ * if it has more than 1 possible parent. In this case, it is going
+ * to have mux functionality. Otherwise it is going to act as a root
+ * clock.
+ */
+ if (sci_clk->num_parents < 2)
+ sci_clk->num_parents = 0;
+
+ if (sci_clk->num_parents) {
+ parent_names = kcalloc(sci_clk->num_parents, sizeof(char *),
+ GFP_KERNEL);
+
+ if (!parent_names) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ for (i = 0; i < sci_clk->num_parents; i++) {
+ char *parent_name;
+
+ parent_name = kasprintf(GFP_KERNEL, "clk:%d:%d",
+ sci_clk->dev_id,
+ sci_clk->clk_id + 1 + i);
+ if (!parent_name) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ parent_names[i] = parent_name;
+ }
+ init.parent_names = (void *)parent_names;
+ }
+
+ init.ops = &sci_clk_ops;
+ init.num_parents = sci_clk->num_parents;
+ sci_clk->hw.init = &init;
+
+ ret = devm_clk_hw_register(provider->dev, &sci_clk->hw);
+ if (ret)
+ dev_err(provider->dev, "failed clk register with %d\n", ret);
+
+err:
+ if (parent_names) {
+ for (i = 0; i < sci_clk->num_parents; i++)
+ kfree(parent_names[i]);
+
+ kfree(parent_names);
+ }
+
+ kfree(name);
+
+ return ret;
+}
+
+static int _cmp_sci_clk(const void *a, const void *b)
+{
+ const struct sci_clk *ca = a;
+ const struct sci_clk *cb = *(struct sci_clk **)b;
+
+ if (ca->dev_id == cb->dev_id && ca->clk_id == cb->clk_id)
+ return 0;
+ if (ca->dev_id > cb->dev_id ||
+ (ca->dev_id == cb->dev_id && ca->clk_id > cb->clk_id))
+ return 1;
+ return -1;
+}
+
+/**
+ * sci_clk_get - Xlate function for getting clock handles
+ * @clkspec: device tree clock specifier
+ * @data: pointer to the clock provider
+ *
+ * Xlate function for retrieving clock TI SCI hw clock handles based on
+ * device tree clock specifier. Called from the common clock framework,
+ * when a corresponding of_clk_get call is executed. Returns a pointer
+ * to the TI SCI hw clock struct, or ERR_PTR value in failure.
+ */
+static struct clk_hw *sci_clk_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct sci_clk_provider *provider = data;
+ struct sci_clk **clk;
+ struct sci_clk key;
+
+ if (clkspec->args_count != 2)
+ return ERR_PTR(-EINVAL);
+
+ key.dev_id = clkspec->args[0];
+ key.clk_id = clkspec->args[1];
+
+ clk = bsearch(&key, provider->clocks, provider->num_clocks,
+ sizeof(clk), _cmp_sci_clk);
+
+ if (!clk)
+ return ERR_PTR(-ENODEV);
+
+ return &(*clk)->hw;
+}
+
+static int ti_sci_init_clocks(struct sci_clk_provider *p)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < p->num_clocks; i++) {
+ ret = _sci_clk_build(p, p->clocks[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id ti_sci_clk_of_match[] = {
+ { .compatible = "ti,k2g-sci-clk" },
+ { /* Sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ti_sci_clk_of_match);
+
+#ifdef CONFIG_TI_SCI_CLK_PROBE_FROM_FW
+static int ti_sci_scan_clocks_from_fw(struct sci_clk_provider *provider)
+{
+ int ret;
+ int num_clks = 0;
+ struct sci_clk **clks = NULL;
+ struct sci_clk **tmp_clks;
+ struct sci_clk *sci_clk;
+ int max_clks = 0;
+ int clk_id = 0;
+ int dev_id = 0;
+ u32 num_parents = 0;
+ int gap_size = 0;
+ struct device *dev = provider->dev;
+
+ while (1) {
+ ret = provider->ops->get_num_parents(provider->sci, dev_id,
+ clk_id,
+ (void *)&num_parents);
+ if (ret) {
+ gap_size++;
+ if (!clk_id) {
+ if (gap_size >= 5)
+ break;
+ dev_id++;
+ } else {
+ if (gap_size >= 2) {
+ dev_id++;
+ clk_id = 0;
+ gap_size = 0;
+ } else {
+ clk_id++;
+ }
+ }
+ continue;
+ }
+
+ gap_size = 0;
+
+ if (num_clks == max_clks) {
+ tmp_clks = devm_kmalloc_array(dev, max_clks + 64,
+ sizeof(sci_clk),
+ GFP_KERNEL);
+ memcpy(tmp_clks, clks, max_clks * sizeof(sci_clk));
+ if (max_clks)
+ devm_kfree(dev, clks);
+ max_clks += 64;
+ clks = tmp_clks;
+ }
+
+ sci_clk = devm_kzalloc(dev, sizeof(*sci_clk), GFP_KERNEL);
+ if (!sci_clk)
+ return -ENOMEM;
+ sci_clk->dev_id = dev_id;
+ sci_clk->clk_id = clk_id;
+ sci_clk->provider = provider;
+ sci_clk->num_parents = num_parents;
+
+ clks[num_clks] = sci_clk;
+
+ clk_id++;
+ num_clks++;
+ }
+
+ provider->clocks = devm_kmalloc_array(dev, num_clks, sizeof(sci_clk),
+ GFP_KERNEL);
+ if (!provider->clocks)
+ return -ENOMEM;
+
+ memcpy(provider->clocks, clks, num_clks * sizeof(sci_clk));
+
+ provider->num_clocks = num_clks;
+
+ devm_kfree(dev, clks);
+
+ return 0;
+}
+
+#else
+
+static int _cmp_sci_clk_list(void *priv, const struct list_head *a,
+ const struct list_head *b)
+{
+ struct sci_clk *ca = container_of(a, struct sci_clk, node);
+ struct sci_clk *cb = container_of(b, struct sci_clk, node);
+
+ return _cmp_sci_clk(ca, &cb);
+}
+
+static int ti_sci_scan_clocks_from_dt(struct sci_clk_provider *provider)
+{
+ struct device *dev = provider->dev;
+ struct device_node *np = NULL;
+ int ret;
+ int index;
+ struct of_phandle_args args;
+ struct list_head clks;
+ struct sci_clk *sci_clk, *prev;
+ int num_clks = 0;
+ int num_parents;
+ int clk_id;
+ const char * const clk_names[] = {
+ "clocks", "assigned-clocks", "assigned-clock-parents", NULL
+ };
+ const char * const *clk_name;
+
+ INIT_LIST_HEAD(&clks);
+
+ clk_name = clk_names;
+
+ while (*clk_name) {
+ np = of_find_node_with_property(np, *clk_name);
+ if (!np) {
+ clk_name++;
+ continue;
+ }
+
+ if (!of_device_is_available(np))
+ continue;
+
+ index = 0;
+
+ do {
+ ret = of_parse_phandle_with_args(np, *clk_name,
+ "#clock-cells", index,
+ &args);
+ if (ret)
+ break;
+
+ if (args.args_count == 2 && args.np == dev->of_node) {
+ sci_clk = devm_kzalloc(dev, sizeof(*sci_clk),
+ GFP_KERNEL);
+ if (!sci_clk)
+ return -ENOMEM;
+
+ sci_clk->dev_id = args.args[0];
+ sci_clk->clk_id = args.args[1];
+ sci_clk->provider = provider;
+ provider->ops->get_num_parents(provider->sci,
+ sci_clk->dev_id,
+ sci_clk->clk_id,
+ (void *)&sci_clk->num_parents);
+ list_add_tail(&sci_clk->node, &clks);
+
+ num_clks++;
+
+ num_parents = sci_clk->num_parents;
+ if (num_parents == 1)
+ num_parents = 0;
+
+ /*
+ * Linux kernel has inherent limitation
+ * of 255 clock parents at the moment.
+ * Right now, it is not expected that
+ * any mux clock from sci-clk driver
+ * would exceed that limit either, but
+ * the ABI basically provides that
+ * possibility. Print out a warning if
+ * this happens for any clock.
+ */
+ if (num_parents >= 255) {
+ dev_warn(dev, "too many parents for dev=%d, clk=%d (%d), cropping to 255.\n",
+ sci_clk->dev_id,
+ sci_clk->clk_id, num_parents);
+ num_parents = 255;
+ }
+
+ clk_id = args.args[1] + 1;
+
+ while (num_parents--) {
+ sci_clk = devm_kzalloc(dev,
+ sizeof(*sci_clk),
+ GFP_KERNEL);
+ if (!sci_clk)
+ return -ENOMEM;
+ sci_clk->dev_id = args.args[0];
+ sci_clk->clk_id = clk_id++;
+ sci_clk->provider = provider;
+ list_add_tail(&sci_clk->node, &clks);
+
+ num_clks++;
+ }
+ }
+
+ index++;
+ } while (args.np);
+ }
+
+ list_sort(NULL, &clks, _cmp_sci_clk_list);
+
+ provider->clocks = devm_kmalloc_array(dev, num_clks, sizeof(sci_clk),
+ GFP_KERNEL);
+ if (!provider->clocks)
+ return -ENOMEM;
+
+ num_clks = 0;
+ prev = NULL;
+
+ list_for_each_entry(sci_clk, &clks, node) {
+ if (prev && prev->dev_id == sci_clk->dev_id &&
+ prev->clk_id == sci_clk->clk_id)
+ continue;
+
+ provider->clocks[num_clks++] = sci_clk;
+ prev = sci_clk;
+ }
+
+ provider->num_clocks = num_clks;
+
+ return 0;
+}
+#endif
+
+/**
+ * ti_sci_clk_probe - Probe function for the TI SCI clock driver
+ * @pdev: platform device pointer to be probed
+ *
+ * Probes the TI SCI clock device. Allocates a new clock provider
+ * and registers this to the common clock framework. Also applies
+ * any required flags to the identified clocks via clock lists
+ * supplied from DT. Returns 0 for success, negative error value
+ * for failure.
+ */
+static int ti_sci_clk_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct sci_clk_provider *provider;
+ const struct ti_sci_handle *handle;
+ int ret;
+
+ handle = devm_ti_sci_get_handle(dev);
+ if (IS_ERR(handle))
+ return PTR_ERR(handle);
+
+ provider = devm_kzalloc(dev, sizeof(*provider), GFP_KERNEL);
+ if (!provider)
+ return -ENOMEM;
+
+ provider->sci = handle;
+ provider->ops = &handle->ops.clk_ops;
+ provider->dev = dev;
+
+#ifdef CONFIG_TI_SCI_CLK_PROBE_FROM_FW
+ ret = ti_sci_scan_clocks_from_fw(provider);
+ if (ret) {
+ dev_err(dev, "scan clocks from FW failed: %d\n", ret);
+ return ret;
+ }
+#else
+ ret = ti_sci_scan_clocks_from_dt(provider);
+ if (ret) {
+ dev_err(dev, "scan clocks from DT failed: %d\n", ret);
+ return ret;
+ }
+#endif
+
+ ret = ti_sci_init_clocks(provider);
+ if (ret) {
+ pr_err("ti-sci-init-clocks failed.\n");
+ return ret;
+ }
+
+ return of_clk_add_hw_provider(np, sci_clk_get, provider);
+}
+
+/**
+ * ti_sci_clk_remove - Remove TI SCI clock device
+ * @pdev: platform device pointer for the device to be removed
+ *
+ * Removes the TI SCI device. Unregisters the clock provider registered
+ * via common clock framework. Any memory allocated for the device will
+ * be free'd silently via the devm framework. Returns 0 always.
+ */
+static void ti_sci_clk_remove(struct platform_device *pdev)
+{
+ of_clk_del_provider(pdev->dev.of_node);
+}
+
+static struct platform_driver ti_sci_clk_driver = {
+ .probe = ti_sci_clk_probe,
+ .remove_new = ti_sci_clk_remove,
+ .driver = {
+ .name = "ti-sci-clk",
+ .of_match_table = of_match_ptr(ti_sci_clk_of_match),
+ },
+};
+module_platform_driver(ti_sci_clk_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TI System Control Interface(SCI) Clock driver");
+MODULE_AUTHOR("Tero Kristo");
+MODULE_ALIAS("platform:ti-sci-clk");
diff --git a/drivers/clk/keystone/syscon-clk.c b/drivers/clk/keystone/syscon-clk.c
new file mode 100644
index 0000000000..935d9a2d8c
--- /dev/null
+++ b/drivers/clk/keystone/syscon-clk.c
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+struct ti_syscon_gate_clk_priv {
+ struct clk_hw hw;
+ struct regmap *regmap;
+ u32 reg;
+ u32 idx;
+};
+
+struct ti_syscon_gate_clk_data {
+ char *name;
+ u32 offset;
+ u32 bit_idx;
+};
+
+static struct
+ti_syscon_gate_clk_priv *to_ti_syscon_gate_clk_priv(struct clk_hw *hw)
+{
+ return container_of(hw, struct ti_syscon_gate_clk_priv, hw);
+}
+
+static int ti_syscon_gate_clk_enable(struct clk_hw *hw)
+{
+ struct ti_syscon_gate_clk_priv *priv = to_ti_syscon_gate_clk_priv(hw);
+
+ return regmap_write_bits(priv->regmap, priv->reg, priv->idx,
+ priv->idx);
+}
+
+static void ti_syscon_gate_clk_disable(struct clk_hw *hw)
+{
+ struct ti_syscon_gate_clk_priv *priv = to_ti_syscon_gate_clk_priv(hw);
+
+ regmap_write_bits(priv->regmap, priv->reg, priv->idx, 0);
+}
+
+static int ti_syscon_gate_clk_is_enabled(struct clk_hw *hw)
+{
+ unsigned int val;
+ struct ti_syscon_gate_clk_priv *priv = to_ti_syscon_gate_clk_priv(hw);
+
+ regmap_read(priv->regmap, priv->reg, &val);
+
+ return !!(val & priv->idx);
+}
+
+static const struct clk_ops ti_syscon_gate_clk_ops = {
+ .enable = ti_syscon_gate_clk_enable,
+ .disable = ti_syscon_gate_clk_disable,
+ .is_enabled = ti_syscon_gate_clk_is_enabled,
+};
+
+static struct clk_hw
+*ti_syscon_gate_clk_register(struct device *dev, struct regmap *regmap,
+ const char *parent_name,
+ const struct ti_syscon_gate_clk_data *data)
+{
+ struct ti_syscon_gate_clk_priv *priv;
+ struct clk_init_data init;
+ char *name = NULL;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return ERR_PTR(-ENOMEM);
+
+ init.ops = &ti_syscon_gate_clk_ops;
+ if (parent_name) {
+ name = kasprintf(GFP_KERNEL, "%s:%s", data->name, parent_name);
+ init.name = name;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = CLK_SET_RATE_PARENT;
+ } else {
+ init.name = data->name;
+ init.parent_names = NULL;
+ init.num_parents = 0;
+ init.flags = 0;
+ }
+
+ priv->regmap = regmap;
+ priv->reg = data->offset;
+ priv->idx = BIT(data->bit_idx);
+ priv->hw.init = &init;
+
+ ret = devm_clk_hw_register(dev, &priv->hw);
+
+ if (name)
+ kfree(init.name);
+
+ if (ret)
+ return ERR_PTR(ret);
+
+ return &priv->hw;
+}
+
+static int ti_syscon_gate_clk_probe(struct platform_device *pdev)
+{
+ const struct ti_syscon_gate_clk_data *data, *p;
+ struct clk_hw_onecell_data *hw_data;
+ struct device *dev = &pdev->dev;
+ int num_clks, num_parents, i;
+ const char *parent_name;
+ struct regmap *regmap;
+
+ data = device_get_match_data(dev);
+ if (!data)
+ return -EINVAL;
+
+ regmap = device_node_to_regmap(dev->of_node);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap),
+ "failed to get regmap\n");
+
+ num_clks = 0;
+ for (p = data; p->name; p++)
+ num_clks++;
+
+ num_parents = of_clk_get_parent_count(dev->of_node);
+ if (of_device_is_compatible(dev->of_node, "ti,am62-audio-refclk") &&
+ num_parents == 0) {
+ return dev_err_probe(dev, -EINVAL,
+ "must specify a parent clock\n");
+ }
+
+ hw_data = devm_kzalloc(dev, struct_size(hw_data, hws, num_clks),
+ GFP_KERNEL);
+ if (!hw_data)
+ return -ENOMEM;
+
+ hw_data->num = num_clks;
+
+ parent_name = of_clk_get_parent_name(dev->of_node, 0);
+ for (i = 0; i < num_clks; i++) {
+ hw_data->hws[i] = ti_syscon_gate_clk_register(dev, regmap,
+ parent_name,
+ &data[i]);
+ if (IS_ERR(hw_data->hws[i]))
+ dev_warn(dev, "failed to register %s\n",
+ data[i].name);
+ }
+
+ if (num_clks == 1)
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
+ hw_data->hws[0]);
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, hw_data);
+}
+
+#define TI_SYSCON_CLK_GATE(_name, _offset, _bit_idx) \
+ { \
+ .name = _name, \
+ .offset = (_offset), \
+ .bit_idx = (_bit_idx), \
+ }
+
+static const struct ti_syscon_gate_clk_data am654_clk_data[] = {
+ TI_SYSCON_CLK_GATE("ehrpwm_tbclk0", 0x0, 0),
+ TI_SYSCON_CLK_GATE("ehrpwm_tbclk1", 0x4, 0),
+ TI_SYSCON_CLK_GATE("ehrpwm_tbclk2", 0x8, 0),
+ TI_SYSCON_CLK_GATE("ehrpwm_tbclk3", 0xc, 0),
+ TI_SYSCON_CLK_GATE("ehrpwm_tbclk4", 0x10, 0),
+ TI_SYSCON_CLK_GATE("ehrpwm_tbclk5", 0x14, 0),
+ { /* Sentinel */ },
+};
+
+static const struct ti_syscon_gate_clk_data am64_clk_data[] = {
+ TI_SYSCON_CLK_GATE("epwm_tbclk0", 0x0, 0),
+ TI_SYSCON_CLK_GATE("epwm_tbclk1", 0x0, 1),
+ TI_SYSCON_CLK_GATE("epwm_tbclk2", 0x0, 2),
+ TI_SYSCON_CLK_GATE("epwm_tbclk3", 0x0, 3),
+ TI_SYSCON_CLK_GATE("epwm_tbclk4", 0x0, 4),
+ TI_SYSCON_CLK_GATE("epwm_tbclk5", 0x0, 5),
+ TI_SYSCON_CLK_GATE("epwm_tbclk6", 0x0, 6),
+ TI_SYSCON_CLK_GATE("epwm_tbclk7", 0x0, 7),
+ TI_SYSCON_CLK_GATE("epwm_tbclk8", 0x0, 8),
+ { /* Sentinel */ },
+};
+
+static const struct ti_syscon_gate_clk_data am62_clk_data[] = {
+ TI_SYSCON_CLK_GATE("epwm_tbclk0", 0x0, 0),
+ TI_SYSCON_CLK_GATE("epwm_tbclk1", 0x0, 1),
+ TI_SYSCON_CLK_GATE("epwm_tbclk2", 0x0, 2),
+ { /* Sentinel */ },
+};
+
+static const struct ti_syscon_gate_clk_data am62_audio_clk_data[] = {
+ TI_SYSCON_CLK_GATE("audio_refclk", 0x0, 15),
+ { /* Sentinel */ },
+};
+
+static const struct of_device_id ti_syscon_gate_clk_ids[] = {
+ {
+ .compatible = "ti,am654-ehrpwm-tbclk",
+ .data = &am654_clk_data,
+ },
+ {
+ .compatible = "ti,am64-epwm-tbclk",
+ .data = &am64_clk_data,
+ },
+ {
+ .compatible = "ti,am62-epwm-tbclk",
+ .data = &am62_clk_data,
+ },
+ {
+ .compatible = "ti,am62-audio-refclk",
+ .data = &am62_audio_clk_data,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ti_syscon_gate_clk_ids);
+
+static struct platform_driver ti_syscon_gate_clk_driver = {
+ .probe = ti_syscon_gate_clk_probe,
+ .driver = {
+ .name = "ti-syscon-gate-clk",
+ .of_match_table = ti_syscon_gate_clk_ids,
+ },
+};
+module_platform_driver(ti_syscon_gate_clk_driver);
+
+MODULE_AUTHOR("Vignesh Raghavendra <vigneshr@ti.com>");
+MODULE_DESCRIPTION("Syscon backed gate-clock driver");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 01:04:26 +0000