summaryrefslogtreecommitdiffstats
path: root/drivers/clocksource
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/clocksource')
-rw-r--r--drivers/clocksource/Kconfig735
-rw-r--r--drivers/clocksource/Makefile91
-rw-r--r--drivers/clocksource/acpi_pm.c245
-rw-r--r--drivers/clocksource/arc_timer.c373
-rw-r--r--drivers/clocksource/arm_arch_timer.c1818
-rw-r--r--drivers/clocksource/arm_global_timer.c442
-rw-r--r--drivers/clocksource/armv7m_systick.c86
-rw-r--r--drivers/clocksource/asm9260_timer.c242
-rw-r--r--drivers/clocksource/bcm2835_timer.c137
-rw-r--r--drivers/clocksource/bcm_kona_timer.c192
-rw-r--r--drivers/clocksource/clksrc-dbx500-prcmu.c72
-rw-r--r--drivers/clocksource/clksrc_st_lpc.c131
-rw-r--r--drivers/clocksource/clps711x-timer.c101
-rw-r--r--drivers/clocksource/dummy_timer.c37
-rw-r--r--drivers/clocksource/dw_apb_timer.c417
-rw-r--r--drivers/clocksource/dw_apb_timer_of.c209
-rw-r--r--drivers/clocksource/em_sti.c365
-rw-r--r--drivers/clocksource/exynos_mct.c701
-rw-r--r--drivers/clocksource/hyperv_timer.c614
-rw-r--r--drivers/clocksource/i8253.c196
-rw-r--r--drivers/clocksource/ingenic-ost.c188
-rw-r--r--drivers/clocksource/ingenic-sysost.c540
-rw-r--r--drivers/clocksource/ingenic-timer.c422
-rw-r--r--drivers/clocksource/jcore-pit.c246
-rw-r--r--drivers/clocksource/mips-gic-timer.c269
-rw-r--r--drivers/clocksource/mmio.c70
-rw-r--r--drivers/clocksource/mps2-timer.c273
-rw-r--r--drivers/clocksource/mxs_timer.c273
-rw-r--r--drivers/clocksource/nomadik-mtu.c283
-rw-r--r--drivers/clocksource/numachip.c88
-rw-r--r--drivers/clocksource/renesas-ostm.c248
-rw-r--r--drivers/clocksource/samsung_pwm_timer.c518
-rw-r--r--drivers/clocksource/scx200_hrt.c89
-rw-r--r--drivers/clocksource/sh_cmt.c1175
-rw-r--r--drivers/clocksource/sh_mtu2.c527
-rw-r--r--drivers/clocksource/sh_tmu.c676
-rw-r--r--drivers/clocksource/timer-armada-370-xp.c413
-rw-r--r--drivers/clocksource/timer-atmel-pit.c264
-rw-r--r--drivers/clocksource/timer-atmel-st.c250
-rw-r--r--drivers/clocksource/timer-atmel-tcb.c511
-rw-r--r--drivers/clocksource/timer-cadence-ttc.c553
-rw-r--r--drivers/clocksource/timer-clint.c277
-rw-r--r--drivers/clocksource/timer-cs5535.c188
-rw-r--r--drivers/clocksource/timer-davinci.c384
-rw-r--r--drivers/clocksource/timer-digicolor.c204
-rw-r--r--drivers/clocksource/timer-fsl-ftm.c355
-rw-r--r--drivers/clocksource/timer-fttmr010.c459
-rw-r--r--drivers/clocksource/timer-goldfish.c153
-rw-r--r--drivers/clocksource/timer-gx6605s.c155
-rw-r--r--drivers/clocksource/timer-gxp.c215
-rw-r--r--drivers/clocksource/timer-imx-gpt.c512
-rw-r--r--drivers/clocksource/timer-imx-sysctr.c150
-rw-r--r--drivers/clocksource/timer-imx-tpm.c236
-rw-r--r--drivers/clocksource/timer-integrator-ap.c225
-rw-r--r--drivers/clocksource/timer-ixp4xx.c293
-rw-r--r--drivers/clocksource/timer-keystone.c226
-rw-r--r--drivers/clocksource/timer-loongson1-pwm.c236
-rw-r--r--drivers/clocksource/timer-lpc32xx.c310
-rw-r--r--drivers/clocksource/timer-mediatek-cpux.c140
-rw-r--r--drivers/clocksource/timer-mediatek.c341
-rw-r--r--drivers/clocksource/timer-meson6.c212
-rw-r--r--drivers/clocksource/timer-microchip-pit64b.c508
-rw-r--r--drivers/clocksource/timer-milbeaut.c189
-rw-r--r--drivers/clocksource/timer-mp-csky.c173
-rw-r--r--drivers/clocksource/timer-msc313e.c253
-rw-r--r--drivers/clocksource/timer-npcm7xx.c223
-rw-r--r--drivers/clocksource/timer-of.c230
-rw-r--r--drivers/clocksource/timer-of.h74
-rw-r--r--drivers/clocksource/timer-orion.c189
-rw-r--r--drivers/clocksource/timer-owl.c176
-rw-r--r--drivers/clocksource/timer-pistachio.c216
-rw-r--r--drivers/clocksource/timer-probe.c45
-rw-r--r--drivers/clocksource/timer-pxa.c227
-rw-r--r--drivers/clocksource/timer-qcom.c249
-rw-r--r--drivers/clocksource/timer-rda.c195
-rw-r--r--drivers/clocksource/timer-riscv.c220
-rw-r--r--drivers/clocksource/timer-rockchip.c304
-rw-r--r--drivers/clocksource/timer-sp.h63
-rw-r--r--drivers/clocksource/timer-sp804.c390
-rw-r--r--drivers/clocksource/timer-sprd.c209
-rw-r--r--drivers/clocksource/timer-stm32-lp.c215
-rw-r--r--drivers/clocksource/timer-stm32.c336
-rw-r--r--drivers/clocksource/timer-sun4i.c226
-rw-r--r--drivers/clocksource/timer-sun5i.c330
-rw-r--r--drivers/clocksource/timer-tegra.c416
-rw-r--r--drivers/clocksource/timer-tegra186.c510
-rw-r--r--drivers/clocksource/timer-ti-32k.c165
-rw-r--r--drivers/clocksource/timer-ti-dm-systimer.c852
-rw-r--r--drivers/clocksource/timer-ti-dm.c1306
-rw-r--r--drivers/clocksource/timer-versatile.c40
-rw-r--r--drivers/clocksource/timer-vf-pit.c194
-rw-r--r--drivers/clocksource/timer-vt8500.c150
-rw-r--r--drivers/clocksource/timer-zevio.c213
93 files changed, 29437 insertions, 0 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
new file mode 100644
index 0000000000..0ba0dc4ecf
--- /dev/null
+++ b/drivers/clocksource/Kconfig
@@ -0,0 +1,735 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Clock Source drivers"
+ depends on GENERIC_CLOCKEVENTS
+
+config TIMER_OF
+ bool
+ select TIMER_PROBE
+
+config TIMER_ACPI
+ bool
+ select TIMER_PROBE
+
+config TIMER_PROBE
+ bool
+
+config CLKSRC_I8253
+ bool
+
+config CLKEVT_I8253
+ bool
+
+config I8253_LOCK
+ bool
+
+config OMAP_DM_SYSTIMER
+ bool
+ select TIMER_OF
+
+config CLKBLD_I8253
+ def_bool y if CLKSRC_I8253 || CLKEVT_I8253 || I8253_LOCK
+
+config CLKSRC_MMIO
+ bool
+
+config BCM2835_TIMER
+ bool "BCM2835 timer driver" if COMPILE_TEST
+ select CLKSRC_MMIO
+ help
+ Enables the support for the BCM2835 timer driver.
+
+config BCM_KONA_TIMER
+ bool "BCM mobile timer driver" if COMPILE_TEST
+ select CLKSRC_MMIO
+ help
+ Enables the support for the BCM Kona mobile timer driver.
+
+config DAVINCI_TIMER
+ bool "Texas Instruments DaVinci timer driver" if COMPILE_TEST
+ help
+ Enables the support for the TI DaVinci timer driver.
+
+config DIGICOLOR_TIMER
+ bool "Digicolor timer driver" if COMPILE_TEST
+ select CLKSRC_MMIO
+ depends on HAS_IOMEM
+ help
+ Enables the support for the digicolor timer driver.
+
+config OMAP_DM_TIMER
+ bool "OMAP dual-mode timer driver" if ARCH_K3 || COMPILE_TEST
+ default y if ARCH_K3
+ select TIMER_OF
+ help
+ Enables the support for the TI dual-mode timer driver.
+
+config DW_APB_TIMER
+ bool "DW APB timer driver" if COMPILE_TEST
+ help
+ Enables the support for the dw_apb timer.
+
+config DW_APB_TIMER_OF
+ bool
+ select DW_APB_TIMER
+ select TIMER_OF
+
+config FTTMR010_TIMER
+ bool "Faraday Technology timer driver" if COMPILE_TEST
+ depends on HAS_IOMEM
+ select CLKSRC_MMIO
+ select TIMER_OF
+ select MFD_SYSCON
+ help
+ Enables support for the Faraday Technology timer block
+ FTTMR010.
+
+config IXP4XX_TIMER
+ bool "Intel XScale IXP4xx timer driver" if COMPILE_TEST
+ depends on HAS_IOMEM
+ select CLKSRC_MMIO
+ select TIMER_OF
+ help
+ Enables support for the Intel XScale IXP4xx SoC timer.
+
+config ROCKCHIP_TIMER
+ bool "Rockchip timer driver" if COMPILE_TEST
+ depends on ARM || ARM64
+ select TIMER_OF
+ select CLKSRC_MMIO
+ help
+ Enables the support for the Rockchip timer driver.
+
+config ARMADA_370_XP_TIMER
+ bool "Armada 370 and XP timer driver" if COMPILE_TEST
+ depends on ARM
+ select TIMER_OF
+ select CLKSRC_MMIO
+ help
+ Enables the support for the Armada 370 and XP timer driver.
+
+config MESON6_TIMER
+ bool "Meson6 timer driver" if COMPILE_TEST
+ select CLKSRC_MMIO
+ help
+ Enables the support for the Meson6 timer driver.
+
+config ORION_TIMER
+ bool "Orion timer driver" if COMPILE_TEST
+ depends on ARM
+ select TIMER_OF
+ select CLKSRC_MMIO
+ help
+ Enables the support for the Orion timer driver
+
+config OWL_TIMER
+ bool "Owl timer driver" if COMPILE_TEST
+ select CLKSRC_MMIO
+ help
+ Enables the support for the Actions Semi Owl timer driver.
+
+config RDA_TIMER
+ bool "RDA timer driver" if COMPILE_TEST
+ select CLKSRC_MMIO
+ select TIMER_OF
+ help
+ Enables the support for the RDA Micro timer driver.
+
+config SUN4I_TIMER
+ bool "Sun4i timer driver" if COMPILE_TEST
+ depends on HAS_IOMEM
+ select CLKSRC_MMIO
+ select TIMER_OF
+ help
+ Enables support for the Sun4i timer.
+
+config SUN5I_HSTIMER
+ bool "Sun5i timer driver" if COMPILE_TEST
+ select CLKSRC_MMIO
+ depends on COMMON_CLK
+ help
+ Enables support the Sun5i timer.
+
+config TEGRA_TIMER
+ bool "Tegra timer driver" if COMPILE_TEST
+ select CLKSRC_MMIO
+ select TIMER_OF
+ depends on ARCH_TEGRA || COMPILE_TEST
+ help
+ Enables support for the Tegra driver.
+
+config TEGRA186_TIMER
+ bool "NVIDIA Tegra186 timer driver"
+ depends on ARCH_TEGRA || COMPILE_TEST
+ depends on WATCHDOG && WATCHDOG_CORE
+ help
+ Enables support for the timers and watchdogs found on NVIDIA
+ Tegra186 and later SoCs.
+
+config VT8500_TIMER
+ bool "VT8500 timer driver" if COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Enables support for the VT8500 driver.
+
+config NPCM7XX_TIMER
+ bool "NPCM7xx timer driver" if COMPILE_TEST
+ depends on HAS_IOMEM
+ select TIMER_OF
+ select CLKSRC_MMIO
+ help
+ Enable 24-bit TIMER0 and TIMER1 counters in the NPCM7xx architecture,
+ where TIMER0 serves as clockevent and TIMER1 serves as clocksource.
+
+config CADENCE_TTC_TIMER
+ bool "Cadence TTC timer driver" if COMPILE_TEST
+ depends on COMMON_CLK
+ help
+ Enables support for the Cadence TTC driver.
+
+config ASM9260_TIMER
+ bool "ASM9260 timer driver" if COMPILE_TEST
+ select CLKSRC_MMIO
+ select TIMER_OF
+ help
+ Enables support for the ASM9260 timer.
+
+config CLKSRC_NOMADIK_MTU
+ bool "Nomakdik clocksource driver" if COMPILE_TEST
+ depends on ARM
+ select CLKSRC_MMIO
+ help
+ Support for Multi Timer Unit. MTU provides access
+ to multiple interrupt generating programmable
+ 32-bit free running decrementing counters.
+
+config CLKSRC_DBX500_PRCMU
+ bool "Clocksource PRCMU Timer" if COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Use the always on PRCMU Timer as clocksource.
+
+config CLPS711X_TIMER
+ bool "Cirrus Logic timer driver" if COMPILE_TEST
+ select CLKSRC_MMIO
+ help
+ Enables support for the Cirrus Logic PS711 timer.
+
+config MXS_TIMER
+ bool "MXS timer driver" if COMPILE_TEST
+ select CLKSRC_MMIO
+ select STMP_DEVICE
+ help
+ Enables support for the MXS timer.
+
+config NSPIRE_TIMER
+ bool "NSpire timer driver" if COMPILE_TEST
+ select CLKSRC_MMIO
+ help
+ Enables support for the Nspire timer.
+
+config KEYSTONE_TIMER
+ bool "Keystone timer driver" if COMPILE_TEST
+ depends on ARM || ARM64
+ select CLKSRC_MMIO
+ help
+ Enables support for the Keystone timer.
+
+config INTEGRATOR_AP_TIMER
+ bool "Integrator-AP timer driver" if COMPILE_TEST
+ select CLKSRC_MMIO
+ help
+ Enables support for the Integrator-AP timer.
+
+config CLKSRC_LPC32XX
+ bool "Clocksource for LPC32XX" if COMPILE_TEST
+ depends on HAS_IOMEM
+ depends on ARM
+ select CLKSRC_MMIO
+ select TIMER_OF
+ help
+ Support for the LPC32XX clocksource.
+
+config CLKSRC_PISTACHIO
+ bool "Clocksource for Pistachio SoC"
+ depends on HAS_IOMEM
+ depends on MIPS || COMPILE_TEST
+ select TIMER_OF
+ help
+ Enables the clocksource for the Pistachio SoC.
+
+config CLKSRC_TI_32K
+ bool "Texas Instruments 32.768 Hz Clocksource" if COMPILE_TEST
+ depends on GENERIC_SCHED_CLOCK
+ select TIMER_OF if OF
+ help
+ This option enables support for Texas Instruments 32.768 Hz clocksource
+ available on many OMAP-like platforms.
+
+config CLKSRC_STM32
+ bool "Clocksource for STM32 SoCs" if !ARCH_STM32
+ depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
+ select CLKSRC_MMIO
+ select TIMER_OF
+
+config CLKSRC_STM32_LP
+ bool "Low power clocksource for STM32 SoCs"
+ depends on MFD_STM32_LPTIMER || COMPILE_TEST
+
+config CLKSRC_MPS2
+ bool "Clocksource for MPS2 SoCs" if COMPILE_TEST
+ depends on GENERIC_SCHED_CLOCK
+ select CLKSRC_MMIO
+ select TIMER_OF
+
+config ARC_TIMERS
+ bool "Support for 32-bit TIMERn counters in ARC Cores" if COMPILE_TEST
+ depends on GENERIC_SCHED_CLOCK
+ select TIMER_OF
+ help
+ These are legacy 32-bit TIMER0 and TIMER1 counters found on all ARC cores
+ (ARC700 as well as ARC HS38).
+ TIMER0 serves as clockevent while TIMER1 provides clocksource.
+
+config ARC_TIMERS_64BIT
+ bool "Support for 64-bit counters in ARC HS38 cores" if COMPILE_TEST
+ depends on ARC_TIMERS
+ select TIMER_OF
+ help
+ This enables 2 different 64-bit timers: RTC (for UP) and GFRC (for SMP).
+ RTC is implemented inside the core, while GFRC sits outside the core in
+ ARConnect IP block. Driver automatically picks one of them for clocksource
+ as appropriate.
+
+config ARM_ARCH_TIMER
+ bool
+ select TIMER_OF if OF
+ select TIMER_ACPI if ACPI
+
+config ARM_ARCH_TIMER_EVTSTREAM
+ bool "Enable ARM architected timer event stream generation by default"
+ default y if ARM_ARCH_TIMER
+ depends on ARM_ARCH_TIMER
+ help
+ This option enables support by default for event stream generation
+ based on the ARM architected timer. It is used for waking up CPUs
+ executing the wfe instruction at a frequency represented as a
+ power-of-2 divisor of the clock rate. The behaviour can also be
+ overridden on the command line using the
+ clocksource.arm_arch_timer.evtstream parameter.
+ The main use of the event stream is wfe-based timeouts of userspace
+ locking implementations. It might also be useful for imposing timeout
+ on wfe to safeguard against any programming errors in case an expected
+ event is not generated.
+ This must be disabled for hardware validation purposes to detect any
+ hardware anomalies of missing events.
+
+config ARM_ARCH_TIMER_OOL_WORKAROUND
+ bool
+
+config FSL_ERRATUM_A008585
+ bool "Workaround for Freescale/NXP Erratum A-008585"
+ default y
+ depends on ARM_ARCH_TIMER && ARM64
+ select ARM_ARCH_TIMER_OOL_WORKAROUND
+ help
+ This option enables a workaround for Freescale/NXP Erratum
+ A-008585 ("ARM generic timer may contain an erroneous
+ value"). The workaround will only be active if the
+ fsl,erratum-a008585 property is found in the timer node.
+
+config HISILICON_ERRATUM_161010101
+ bool "Workaround for Hisilicon Erratum 161010101"
+ default y
+ select ARM_ARCH_TIMER_OOL_WORKAROUND
+ depends on ARM_ARCH_TIMER && ARM64
+ help
+ This option enables a workaround for Hisilicon Erratum
+ 161010101. The workaround will be active if the hisilicon,erratum-161010101
+ property is found in the timer node.
+
+config ARM64_ERRATUM_858921
+ bool "Workaround for Cortex-A73 erratum 858921"
+ default y
+ select ARM_ARCH_TIMER_OOL_WORKAROUND
+ depends on ARM_ARCH_TIMER && ARM64
+ help
+ This option enables a workaround applicable to Cortex-A73
+ (all versions), whose counter may return incorrect values.
+ The workaround will be dynamically enabled when an affected
+ core is detected.
+
+config SUN50I_ERRATUM_UNKNOWN1
+ bool "Workaround for Allwinner A64 erratum UNKNOWN1"
+ default y
+ depends on ARM_ARCH_TIMER && ARM64 && ARCH_SUNXI
+ select ARM_ARCH_TIMER_OOL_WORKAROUND
+ help
+ This option enables a workaround for instability in the timer on
+ the Allwinner A64 SoC. The workaround will only be active if the
+ allwinner,erratum-unknown1 property is found in the timer node.
+
+config ARM_GLOBAL_TIMER
+ bool "Support for the ARM global timer" if COMPILE_TEST
+ select TIMER_OF if OF
+ depends on ARM
+ help
+ This option enables support for the ARM global timer unit.
+
+config ARM_GT_INITIAL_PRESCALER_VAL
+ int "ARM global timer initial prescaler value"
+ default 2 if ARCH_ZYNQ
+ default 1
+ depends on ARM_GLOBAL_TIMER
+ help
+ When the ARM global timer initializes, its current rate is declared
+ to the kernel and maintained forever. Should its parent clock
+ change, the driver tries to fix the timer's internal prescaler.
+ On some machs (i.e. Zynq) the initial prescaler value thus poses
+ bounds about how much the parent clock is allowed to decrease or
+ increase wrt the initial clock value.
+ This affects CPU_FREQ max delta from the initial frequency.
+
+config ARM_TIMER_SP804
+ bool "Support for Dual Timer SP804 module" if COMPILE_TEST
+ depends on GENERIC_SCHED_CLOCK && HAVE_CLK
+ select CLKSRC_MMIO
+ select TIMER_OF if OF
+
+config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
+ bool
+ depends on ARM_GLOBAL_TIMER
+ default y
+ help
+ Use ARM global timer clock source as sched_clock.
+
+config ARMV7M_SYSTICK
+ bool "Support for the ARMv7M system time" if COMPILE_TEST
+ select TIMER_OF if OF
+ select CLKSRC_MMIO
+ help
+ This option enables support for the ARMv7M system timer unit.
+
+config ATMEL_PIT
+ bool "Atmel PIT support" if COMPILE_TEST
+ depends on HAS_IOMEM
+ select TIMER_OF if OF
+ help
+ Support for the Periodic Interval Timer found on Atmel SoCs.
+
+config ATMEL_ST
+ bool "Atmel ST timer support" if COMPILE_TEST
+ depends on HAS_IOMEM
+ select TIMER_OF
+ select MFD_SYSCON
+ help
+ Support for the Atmel ST timer.
+
+config ATMEL_TCB_CLKSRC
+ bool "Atmel TC Block timer driver" if COMPILE_TEST
+ depends on ARM && HAS_IOMEM
+ select TIMER_OF if OF
+ help
+ Support for Timer Counter Blocks on Atmel SoCs.
+
+config CLKSRC_EXYNOS_MCT
+ bool "Exynos multi core timer driver" if COMPILE_TEST
+ depends on ARM || ARM64
+ depends on ARCH_ARTPEC || ARCH_EXYNOS || COMPILE_TEST
+ help
+ Support for Multi Core Timer controller on Exynos SoCs.
+
+config CLKSRC_SAMSUNG_PWM
+ bool "PWM timer driver for Samsung S3C, S5P" if COMPILE_TEST
+ depends on HAS_IOMEM
+ depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST
+ help
+ This is a new clocksource driver for the PWM timer found in
+ Samsung S3C, S5P and Exynos SoCs, replacing an earlier driver
+ for all devicetree enabled platforms. This driver will be
+ needed only on systems that do not have the Exynos MCT available.
+
+config FSL_FTM_TIMER
+ bool "Freescale FlexTimer Module driver" if COMPILE_TEST
+ depends on HAS_IOMEM
+ select CLKSRC_MMIO
+ help
+ Support for Freescale FlexTimer Module (FTM) timer.
+
+config VF_PIT_TIMER
+ bool
+ select CLKSRC_MMIO
+ help
+ Support for Periodic Interrupt Timer on Freescale Vybrid Family SoCs.
+
+config SYS_SUPPORTS_SH_CMT
+ bool
+
+config MTK_TIMER
+ bool "Mediatek timer driver" if COMPILE_TEST
+ depends on HAS_IOMEM
+ select TIMER_OF
+ select CLKSRC_MMIO
+ help
+ Support for Mediatek timer driver.
+
+config MTK_CPUX_TIMER
+ bool "MediaTek CPUX timer driver" if COMPILE_TEST
+ depends on HAS_IOMEM
+ default ARCH_MEDIATEK
+ select TIMER_OF
+ select CLKSRC_MMIO
+ help
+ Support for MediaTek CPUXGPT timer driver.
+
+config SPRD_TIMER
+ bool "Spreadtrum timer driver" if EXPERT
+ depends on HAS_IOMEM
+ depends on (ARCH_SPRD || COMPILE_TEST)
+ default ARCH_SPRD
+ select TIMER_OF
+ help
+ Enables support for the Spreadtrum timer driver.
+
+config SYS_SUPPORTS_SH_MTU2
+ bool
+
+config SYS_SUPPORTS_SH_TMU
+ bool
+
+config SYS_SUPPORTS_EM_STI
+ bool
+
+config CLKSRC_JCORE_PIT
+ bool "J-Core PIT timer driver" if COMPILE_TEST
+ depends on OF
+ depends on HAS_IOMEM
+ select CLKSRC_MMIO
+ help
+ This enables build of clocksource and clockevent driver for
+ the integrated PIT in the J-Core synthesizable, open source SoC.
+
+config SH_TIMER_CMT
+ bool "Renesas CMT timer driver" if COMPILE_TEST
+ depends on HAS_IOMEM
+ default SYS_SUPPORTS_SH_CMT
+ help
+ This enables build of a clocksource and clockevent driver for
+ the Compare Match Timer (CMT) hardware available in 16/32/48-bit
+ variants on a wide range of Mobile and Automotive SoCs from Renesas.
+
+config SH_TIMER_MTU2
+ bool "Renesas MTU2 timer driver" if COMPILE_TEST
+ depends on HAS_IOMEM
+ default SYS_SUPPORTS_SH_MTU2
+ help
+ This enables build of a clockevent driver for the Multi-Function
+ Timer Pulse Unit 2 (MTU2) hardware available on SoCs from Renesas.
+ This hardware comes with 16-bit timer registers.
+
+config RENESAS_OSTM
+ bool "Renesas OSTM timer driver"
+ depends on ARCH_RENESAS || COMPILE_TEST
+ select CLKSRC_MMIO
+ select TIMER_OF
+ help
+ Enables the support for the Renesas OSTM.
+
+config SH_TIMER_TMU
+ bool "Renesas TMU timer driver" if COMPILE_TEST
+ depends on HAS_IOMEM
+ default SYS_SUPPORTS_SH_TMU
+ help
+ This enables build of a clocksource and clockevent driver for
+ the 32-bit Timer Unit (TMU) hardware available on a wide range
+ SoCs from Renesas.
+
+config EM_TIMER_STI
+ bool "Renesas STI timer driver" if COMPILE_TEST
+ depends on HAS_IOMEM
+ default SYS_SUPPORTS_EM_STI
+ help
+ This enables build of a clocksource and clockevent driver for
+ the 48-bit System Timer (STI) hardware available on a SoCs
+ such as EMEV2 from former NEC Electronics.
+
+config CLKSRC_QCOM
+ bool "Qualcomm MSM timer" if COMPILE_TEST
+ depends on ARM
+ select TIMER_OF
+ help
+ This enables the clocksource and the per CPU clockevent driver for the
+ Qualcomm SoCs.
+
+config CLKSRC_VERSATILE
+ bool "ARM Versatile (Express) reference platforms clock source" if COMPILE_TEST
+ depends on GENERIC_SCHED_CLOCK
+ select TIMER_OF
+ default y if (ARCH_VEXPRESS || ARCH_VERSATILE) && ARM
+ help
+ This option enables clock source based on free running
+ counter available in the "System Registers" block of
+ ARM Versatile and Versatile Express reference platforms.
+
+config CLKSRC_MIPS_GIC
+ bool
+ depends on MIPS_GIC
+ select CLOCKSOURCE_WATCHDOG
+ select TIMER_OF
+
+config CLKSRC_PXA
+ bool "Clocksource for PXA or SA-11x0 platform" if COMPILE_TEST
+ depends on HAS_IOMEM
+ select CLKSRC_MMIO
+ help
+ This enables OST0 support available on PXA and SA-11x0
+ platforms.
+
+config CLKSRC_IMX_GPT
+ bool "Clocksource using i.MX GPT" if COMPILE_TEST
+ depends on (ARM || ARM64) && HAVE_CLK
+ select CLKSRC_MMIO
+
+config CLKSRC_IMX_TPM
+ bool "Clocksource using i.MX TPM" if COMPILE_TEST
+ depends on (ARM || ARM64) && HAVE_CLK
+ select CLKSRC_MMIO
+ select TIMER_OF
+ help
+ Enable this option to use IMX Timer/PWM Module (TPM) timer as
+ clocksource.
+
+config TIMER_IMX_SYS_CTR
+ bool "i.MX system counter timer" if COMPILE_TEST
+ select TIMER_OF
+ help
+ Enable this option to use i.MX system counter timer as a
+ clockevent.
+
+config CLKSRC_LOONGSON1_PWM
+ bool "Clocksource using Loongson1 PWM"
+ depends on MACH_LOONGSON32 || COMPILE_TEST
+ select MIPS_EXTERNAL_TIMER
+ select TIMER_OF
+ help
+ Enable this option to use Loongson1 PWM timer as clocksource
+ instead of the performance counter.
+
+config CLKSRC_ST_LPC
+ bool "Low power clocksource found in the LPC" if COMPILE_TEST
+ select TIMER_OF if OF
+ depends on HAS_IOMEM
+ select CLKSRC_MMIO
+ help
+ Enable this option to use the Low Power controller timer
+ as clocksource.
+
+config GXP_TIMER
+ bool "GXP timer driver" if COMPILE_TEST && !ARCH_HPE
+ default ARCH_HPE
+ select TIMER_OF if OF
+ help
+ Provides a driver for the timer control found on HPE
+ GXP SOCs. This is required for all GXP SOCs.
+
+config RISCV_TIMER
+ bool "Timer for the RISC-V platform" if COMPILE_TEST
+ depends on GENERIC_SCHED_CLOCK && RISCV && RISCV_SBI
+ select TIMER_PROBE
+ select TIMER_OF
+ help
+ This enables the per-hart timer built into all RISC-V systems, which
+ is accessed via both the SBI and the rdcycle instruction. This is
+ required for all RISC-V systems.
+
+config CLINT_TIMER
+ bool "CLINT Timer for the RISC-V platform" if COMPILE_TEST
+ depends on GENERIC_SCHED_CLOCK && RISCV
+ select TIMER_PROBE
+ select TIMER_OF
+ help
+ This option enables the CLINT timer for RISC-V systems. The CLINT
+ driver is usually used for NoMMU RISC-V systems.
+
+config CSKY_MP_TIMER
+ bool "SMP Timer for the C-SKY platform" if COMPILE_TEST
+ depends on CSKY
+ select TIMER_OF
+ help
+ Say yes here to enable C-SKY SMP timer driver used for C-SKY SMP
+ system.
+ csky,mptimer is not only used in SMP system, it also could be used in
+ single core system. It's not a mmio reg and it uses mtcr/mfcr instruction.
+
+config GX6605S_TIMER
+ bool "Gx6605s SOC system timer driver" if COMPILE_TEST
+ depends on CSKY
+ select CLKSRC_MMIO
+ select TIMER_OF
+ help
+ This option enables support for gx6605s SOC's timer.
+
+config MILBEAUT_TIMER
+ bool "Milbeaut timer driver" if COMPILE_TEST
+ depends on OF
+ depends on ARM
+ select TIMER_OF
+ select CLKSRC_MMIO
+ help
+ Enables the support for Milbeaut timer driver.
+
+config MSC313E_TIMER
+ bool "MSC313E timer driver" if COMPILE_TEST
+ select TIMER_OF
+ select CLKSRC_MMIO
+ help
+ Enables support for the MStar MSC313E timer driver.
+ This provides access to multiple interrupt generating
+ programmable 32-bit free running incrementing counters.
+
+config INGENIC_TIMER
+ bool "Clocksource/timer using the TCU in Ingenic JZ SoCs"
+ default MACH_INGENIC
+ depends on MIPS || COMPILE_TEST
+ depends on COMMON_CLK
+ select MFD_SYSCON
+ select TIMER_OF
+ select IRQ_DOMAIN
+ help
+ Support for the timer/counter unit of the Ingenic JZ SoCs.
+
+config INGENIC_SYSOST
+ bool "Clocksource/timer using the SYSOST in Ingenic X SoCs"
+ depends on MIPS || COMPILE_TEST
+ depends on COMMON_CLK
+ select MFD_SYSCON
+ select TIMER_OF
+ select IRQ_DOMAIN
+ help
+ Support for the SYSOST of the Ingenic X Series SoCs.
+
+config INGENIC_OST
+ bool "Clocksource using the OST in Ingenic JZ SoCs"
+ depends on MIPS || COMPILE_TEST
+ depends on COMMON_CLK
+ select MFD_SYSCON
+ help
+ Support for the Operating System Timer of the Ingenic JZ SoCs.
+
+config MICROCHIP_PIT64B
+ bool "Microchip PIT64B support"
+ depends on OF && ARM
+ select TIMER_OF
+ help
+ This option enables Microchip PIT64B timer for Atmel
+ based system. It supports the oneshot, the periodic
+ modes and high resolution. It is used as a clocksource
+ and a clockevent.
+
+config GOLDFISH_TIMER
+ bool "Clocksource using goldfish-rtc"
+ depends on M68K || COMPILE_TEST
+ depends on RTC_DRV_GOLDFISH
+ help
+ Support for the timer/counter of goldfish-rtc
+
+endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
new file mode 100644
index 0000000000..368c3461da
--- /dev/null
+++ b/drivers/clocksource/Makefile
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_TIMER_OF) += timer-of.o
+obj-$(CONFIG_TIMER_PROBE) += timer-probe.o
+obj-$(CONFIG_ATMEL_PIT) += timer-atmel-pit.o
+obj-$(CONFIG_ATMEL_ST) += timer-atmel-st.o
+obj-$(CONFIG_ATMEL_TCB_CLKSRC) += timer-atmel-tcb.o
+obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o
+obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o
+obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC) += timer-cs5535.o
+obj-$(CONFIG_CLKSRC_JCORE_PIT) += jcore-pit.o
+obj-$(CONFIG_SH_TIMER_CMT) += sh_cmt.o
+obj-$(CONFIG_SH_TIMER_MTU2) += sh_mtu2.o
+obj-$(CONFIG_RENESAS_OSTM) += renesas-ostm.o
+obj-$(CONFIG_SH_TIMER_TMU) += sh_tmu.o
+obj-$(CONFIG_EM_TIMER_STI) += em_sti.o
+obj-$(CONFIG_CLKBLD_I8253) += i8253.o
+obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
+obj-$(CONFIG_DAVINCI_TIMER) += timer-davinci.o
+obj-$(CONFIG_DIGICOLOR_TIMER) += timer-digicolor.o
+obj-$(CONFIG_OMAP_DM_TIMER) += timer-ti-dm.o
+obj-$(CONFIG_OMAP_DM_SYSTIMER) += timer-ti-dm-systimer.o
+obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
+obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o
+obj-$(CONFIG_FTTMR010_TIMER) += timer-fttmr010.o
+obj-$(CONFIG_IXP4XX_TIMER) += timer-ixp4xx.o
+obj-$(CONFIG_ROCKCHIP_TIMER) += timer-rockchip.o
+obj-$(CONFIG_CLKSRC_NOMADIK_MTU) += nomadik-mtu.o
+obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
+obj-$(CONFIG_ARMADA_370_XP_TIMER) += timer-armada-370-xp.o
+obj-$(CONFIG_ORION_TIMER) += timer-orion.o
+obj-$(CONFIG_BCM2835_TIMER) += bcm2835_timer.o
+obj-$(CONFIG_CLPS711X_TIMER) += clps711x-timer.o
+obj-$(CONFIG_MXS_TIMER) += mxs_timer.o
+obj-$(CONFIG_CLKSRC_PXA) += timer-pxa.o
+obj-$(CONFIG_SUN4I_TIMER) += timer-sun4i.o
+obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o
+obj-$(CONFIG_MESON6_TIMER) += timer-meson6.o
+obj-$(CONFIG_TEGRA_TIMER) += timer-tegra.o
+obj-$(CONFIG_TEGRA186_TIMER) += timer-tegra186.o
+obj-$(CONFIG_VT8500_TIMER) += timer-vt8500.o
+obj-$(CONFIG_NSPIRE_TIMER) += timer-zevio.o
+obj-$(CONFIG_BCM_KONA_TIMER) += bcm_kona_timer.o
+obj-$(CONFIG_CADENCE_TTC_TIMER) += timer-cadence-ttc.o
+obj-$(CONFIG_CLKSRC_STM32) += timer-stm32.o
+obj-$(CONFIG_CLKSRC_STM32_LP) += timer-stm32-lp.o
+obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
+obj-$(CONFIG_CLKSRC_LPC32XX) += timer-lpc32xx.o
+obj-$(CONFIG_CLKSRC_MPS2) += mps2-timer.o
+obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o
+obj-$(CONFIG_FSL_FTM_TIMER) += timer-fsl-ftm.o
+obj-$(CONFIG_VF_PIT_TIMER) += timer-vf-pit.o
+obj-$(CONFIG_CLKSRC_QCOM) += timer-qcom.o
+obj-$(CONFIG_MTK_TIMER) += timer-mediatek.o
+obj-$(CONFIG_MTK_CPUX_TIMER) += timer-mediatek-cpux.o
+obj-$(CONFIG_CLKSRC_PISTACHIO) += timer-pistachio.o
+obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
+obj-$(CONFIG_OWL_TIMER) += timer-owl.o
+obj-$(CONFIG_MILBEAUT_TIMER) += timer-milbeaut.o
+obj-$(CONFIG_SPRD_TIMER) += timer-sprd.o
+obj-$(CONFIG_NPCM7XX_TIMER) += timer-npcm7xx.o
+obj-$(CONFIG_RDA_TIMER) += timer-rda.o
+
+obj-$(CONFIG_ARC_TIMERS) += arc_timer.o
+obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
+obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
+obj-$(CONFIG_ARMV7M_SYSTICK) += armv7m_systick.o
+obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp804.o
+obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o
+obj-$(CONFIG_KEYSTONE_TIMER) += timer-keystone.o
+obj-$(CONFIG_INTEGRATOR_AP_TIMER) += timer-integrator-ap.o
+obj-$(CONFIG_CLKSRC_VERSATILE) += timer-versatile.o
+obj-$(CONFIG_CLKSRC_MIPS_GIC) += mips-gic-timer.o
+obj-$(CONFIG_CLKSRC_IMX_GPT) += timer-imx-gpt.o
+obj-$(CONFIG_CLKSRC_IMX_TPM) += timer-imx-tpm.o
+obj-$(CONFIG_TIMER_IMX_SYS_CTR) += timer-imx-sysctr.o
+obj-$(CONFIG_ASM9260_TIMER) += asm9260_timer.o
+obj-$(CONFIG_INGENIC_OST) += ingenic-ost.o
+obj-$(CONFIG_INGENIC_SYSOST) += ingenic-sysost.o
+obj-$(CONFIG_INGENIC_TIMER) += ingenic-timer.o
+obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o
+obj-$(CONFIG_X86_NUMACHIP) += numachip.o
+obj-$(CONFIG_RISCV_TIMER) += timer-riscv.o
+obj-$(CONFIG_CLINT_TIMER) += timer-clint.o
+obj-$(CONFIG_CSKY_MP_TIMER) += timer-mp-csky.o
+obj-$(CONFIG_GX6605S_TIMER) += timer-gx6605s.o
+obj-$(CONFIG_HYPERV_TIMER) += hyperv_timer.o
+obj-$(CONFIG_MICROCHIP_PIT64B) += timer-microchip-pit64b.o
+obj-$(CONFIG_MSC313E_TIMER) += timer-msc313e.o
+obj-$(CONFIG_GOLDFISH_TIMER) += timer-goldfish.o
+obj-$(CONFIG_GXP_TIMER) += timer-gxp.o
+obj-$(CONFIG_CLKSRC_LOONGSON1_PWM) += timer-loongson1-pwm.o
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
new file mode 100644
index 0000000000..8233877360
--- /dev/null
+++ b/drivers/clocksource/acpi_pm.c
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/drivers/clocksource/acpi_pm.c
+ *
+ * This file contains the ACPI PM based clocksource.
+ *
+ * This code was largely moved from the i386 timer_pm.c file
+ * which was (C) Dominik Brodowski <linux@brodo.de> 2003
+ * and contained the following comments:
+ *
+ * Driver to use the Power Management Timer (PMTMR) available in some
+ * southbridges as primary timing source for the Linux kernel.
+ *
+ * Based on parts of linux/drivers/acpi/hardware/hwtimer.c, timer_pit.c,
+ * timer_hpet.c, and on Arjan van de Ven's implementation for 2.4.
+ */
+
+#include <linux/acpi_pmtmr.h>
+#include <linux/clocksource.h>
+#include <linux/timex.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+/*
+ * The I/O port the PMTMR resides at.
+ * The location is detected during setup_arch(),
+ * in arch/i386/kernel/acpi/boot.c
+ */
+u32 pmtmr_ioport __read_mostly;
+
+static inline u32 read_pmtmr(void)
+{
+ /* mask the output to 24 bits */
+ return inl(pmtmr_ioport) & ACPI_PM_MASK;
+}
+
+u32 acpi_pm_read_verified(void)
+{
+ u32 v1 = 0, v2 = 0, v3 = 0;
+
+ /*
+ * It has been reported that because of various broken
+ * chipsets (ICH4, PIIX4 and PIIX4E) where the ACPI PM clock
+ * source is not latched, you must read it multiple
+ * times to ensure a safe value is read:
+ */
+ do {
+ v1 = read_pmtmr();
+ v2 = read_pmtmr();
+ v3 = read_pmtmr();
+ } while (unlikely((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1)
+ || (v3 > v1 && v3 < v2)));
+
+ return v2;
+}
+
+static u64 acpi_pm_read(struct clocksource *cs)
+{
+ return (u64)read_pmtmr();
+}
+
+static struct clocksource clocksource_acpi_pm = {
+ .name = "acpi_pm",
+ .rating = 200,
+ .read = acpi_pm_read,
+ .mask = (u64)ACPI_PM_MASK,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+
+#ifdef CONFIG_PCI
+static int acpi_pm_good;
+static int __init acpi_pm_good_setup(char *__str)
+{
+ acpi_pm_good = 1;
+ return 1;
+}
+__setup("acpi_pm_good", acpi_pm_good_setup);
+
+static u64 acpi_pm_read_slow(struct clocksource *cs)
+{
+ return (u64)acpi_pm_read_verified();
+}
+
+static inline void acpi_pm_need_workaround(void)
+{
+ clocksource_acpi_pm.read = acpi_pm_read_slow;
+ clocksource_acpi_pm.rating = 120;
+}
+
+/*
+ * PIIX4 Errata:
+ *
+ * The power management timer may return improper results when read.
+ * Although the timer value settles properly after incrementing,
+ * while incrementing there is a 3 ns window every 69.8 ns where the
+ * timer value is indeterminate (a 4.2% chance that the data will be
+ * incorrect when read). As a result, the ACPI free running count up
+ * timer specification is violated due to erroneous reads.
+ */
+static void acpi_pm_check_blacklist(struct pci_dev *dev)
+{
+ if (acpi_pm_good)
+ return;
+
+ /* the bug has been fixed in PIIX4M */
+ if (dev->revision < 3) {
+ pr_warn("* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,\n"
+ "* this clock source is slow. Consider trying other clock sources\n");
+
+ acpi_pm_need_workaround();
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3,
+ acpi_pm_check_blacklist);
+
+static void acpi_pm_check_graylist(struct pci_dev *dev)
+{
+ if (acpi_pm_good)
+ return;
+
+ pr_warn("* The chipset may have PM-Timer Bug. Due to workarounds for a bug,\n"
+ "* this clock source is slow. If you are sure your timer does not have\n"
+ "* this bug, please use \"acpi_pm_good\" to disable the workaround\n");
+
+ acpi_pm_need_workaround();
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
+ acpi_pm_check_graylist);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_LE,
+ acpi_pm_check_graylist);
+#endif
+
+#ifndef CONFIG_X86_64
+#include <asm/mach_timer.h>
+#define PMTMR_EXPECTED_RATE \
+ ((CALIBRATE_LATCH * (PMTMR_TICKS_PER_SEC >> 10)) / (PIT_TICK_RATE>>10))
+/*
+ * Some boards have the PMTMR running way too fast. We check
+ * the PMTMR rate against PIT channel 2 to catch these cases.
+ */
+static int verify_pmtmr_rate(void)
+{
+ u64 value1, value2;
+ unsigned long count, delta;
+
+ mach_prepare_counter();
+ value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
+ mach_countup(&count);
+ value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
+ delta = (value2 - value1) & ACPI_PM_MASK;
+
+ /* Check that the PMTMR delta is within 5% of what we expect */
+ if (delta < (PMTMR_EXPECTED_RATE * 19) / 20 ||
+ delta > (PMTMR_EXPECTED_RATE * 21) / 20) {
+ pr_info("PM-Timer running at invalid rate: %lu%% of normal - aborting.\n",
+ 100UL * delta / PMTMR_EXPECTED_RATE);
+ return -1;
+ }
+
+ return 0;
+}
+#else
+#define verify_pmtmr_rate() (0)
+#endif
+
+/* Number of monotonicity checks to perform during initialization */
+#define ACPI_PM_MONOTONICITY_CHECKS 10
+/* Number of reads we try to get two different values */
+#define ACPI_PM_READ_CHECKS 10000
+
+static int __init init_acpi_pm_clocksource(void)
+{
+ u64 value1, value2;
+ unsigned int i, j = 0;
+
+ if (!pmtmr_ioport)
+ return -ENODEV;
+
+ /* "verify" this timing source: */
+ for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
+ udelay(100 * j);
+ value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
+ for (i = 0; i < ACPI_PM_READ_CHECKS; i++) {
+ value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
+ if (value2 == value1)
+ continue;
+ if (value2 > value1)
+ break;
+ if ((value2 < value1) && ((value2) < 0xFFF))
+ break;
+ pr_info("PM-Timer had inconsistent results: %#llx, %#llx - aborting.\n",
+ value1, value2);
+ pmtmr_ioport = 0;
+ return -EINVAL;
+ }
+ if (i == ACPI_PM_READ_CHECKS) {
+ pr_info("PM-Timer failed consistency check (%#llx) - aborting.\n",
+ value1);
+ pmtmr_ioport = 0;
+ return -ENODEV;
+ }
+ }
+
+ if (verify_pmtmr_rate() != 0){
+ pmtmr_ioport = 0;
+ return -ENODEV;
+ }
+
+ if (tsc_clocksource_watchdog_disabled())
+ clocksource_acpi_pm.flags |= CLOCK_SOURCE_MUST_VERIFY;
+ return clocksource_register_hz(&clocksource_acpi_pm, PMTMR_TICKS_PER_SEC);
+}
+
+/* We use fs_initcall because we want the PCI fixups to have run
+ * but we still need to load before device_initcall
+ */
+fs_initcall(init_acpi_pm_clocksource);
+
+/*
+ * Allow an override of the IOPort. Stupid BIOSes do not tell us about
+ * the PMTimer, but we might know where it is.
+ */
+static int __init parse_pmtmr(char *arg)
+{
+ unsigned int base;
+ int ret;
+
+ ret = kstrtouint(arg, 16, &base);
+ if (ret) {
+ pr_warn("PMTMR: invalid 'pmtmr=' value: '%s'\n", arg);
+ return 1;
+ }
+
+ pr_info("PMTMR IOPort override: 0x%04x -> 0x%04x\n", pmtmr_ioport,
+ base);
+ pmtmr_ioport = base;
+
+ return 1;
+}
+__setup("pmtmr=", parse_pmtmr);
diff --git a/drivers/clocksource/arc_timer.c b/drivers/clocksource/arc_timer.c
new file mode 100644
index 0000000000..cb18524cc1
--- /dev/null
+++ b/drivers/clocksource/arc_timer.c
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016-17 Synopsys, Inc. (www.synopsys.com)
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/* ARC700 has two 32bit independent prog Timers: TIMER0 and TIMER1, Each can be
+ * programmed to go from @count to @limit and optionally interrupt.
+ * We've designated TIMER0 for clockevents and TIMER1 for clocksource
+ *
+ * ARCv2 based HS38 cores have RTC (in-core) and GFRC (inside ARConnect/MCIP)
+ * which are suitable for UP and SMP based clocksources respectively
+ */
+
+#include <linux/interrupt.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+#include <soc/arc/timers.h>
+#include <soc/arc/mcip.h>
+
+
+static unsigned long arc_timer_freq;
+
+static int noinline arc_get_timer_clk(struct device_node *node)
+{
+ struct clk *clk;
+ int ret;
+
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("timer missing clk\n");
+ return PTR_ERR(clk);
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("Couldn't enable parent clk\n");
+ return ret;
+ }
+
+ arc_timer_freq = clk_get_rate(clk);
+
+ return 0;
+}
+
+/********** Clock Source Device *********/
+
+#ifdef CONFIG_ARC_TIMERS_64BIT
+
+static u64 arc_read_gfrc(struct clocksource *cs)
+{
+ unsigned long flags;
+ u32 l, h;
+
+ /*
+ * From a programming model pov, there seems to be just one instance of
+ * MCIP_CMD/MCIP_READBACK however micro-architecturally there's
+ * an instance PER ARC CORE (not per cluster), and there are dedicated
+ * hardware decode logic (per core) inside ARConnect to handle
+ * simultaneous read/write accesses from cores via those two registers.
+ * So several concurrent commands to ARConnect are OK if they are
+ * trying to access two different sub-components (like GFRC,
+ * inter-core interrupt, etc...). HW also supports simultaneously
+ * accessing GFRC by multiple cores.
+ * That's why it is safe to disable hard interrupts on the local CPU
+ * before access to GFRC instead of taking global MCIP spinlock
+ * defined in arch/arc/kernel/mcip.c
+ */
+ local_irq_save(flags);
+
+ __mcip_cmd(CMD_GFRC_READ_LO, 0);
+ l = read_aux_reg(ARC_REG_MCIP_READBACK);
+
+ __mcip_cmd(CMD_GFRC_READ_HI, 0);
+ h = read_aux_reg(ARC_REG_MCIP_READBACK);
+
+ local_irq_restore(flags);
+
+ return (((u64)h) << 32) | l;
+}
+
+static notrace u64 arc_gfrc_clock_read(void)
+{
+ return arc_read_gfrc(NULL);
+}
+
+static struct clocksource arc_counter_gfrc = {
+ .name = "ARConnect GFRC",
+ .rating = 400,
+ .read = arc_read_gfrc,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init arc_cs_setup_gfrc(struct device_node *node)
+{
+ struct mcip_bcr mp;
+ int ret;
+
+ READ_BCR(ARC_REG_MCIP_BCR, mp);
+ if (!mp.gfrc) {
+ pr_warn("Global-64-bit-Ctr clocksource not detected\n");
+ return -ENXIO;
+ }
+
+ ret = arc_get_timer_clk(node);
+ if (ret)
+ return ret;
+
+ sched_clock_register(arc_gfrc_clock_read, 64, arc_timer_freq);
+
+ return clocksource_register_hz(&arc_counter_gfrc, arc_timer_freq);
+}
+TIMER_OF_DECLARE(arc_gfrc, "snps,archs-timer-gfrc", arc_cs_setup_gfrc);
+
+#define AUX_RTC_CTRL 0x103
+#define AUX_RTC_LOW 0x104
+#define AUX_RTC_HIGH 0x105
+
+static u64 arc_read_rtc(struct clocksource *cs)
+{
+ unsigned long status;
+ u32 l, h;
+
+ /*
+ * hardware has an internal state machine which tracks readout of
+ * low/high and updates the CTRL.status if
+ * - interrupt/exception taken between the two reads
+ * - high increments after low has been read
+ */
+ do {
+ l = read_aux_reg(AUX_RTC_LOW);
+ h = read_aux_reg(AUX_RTC_HIGH);
+ status = read_aux_reg(AUX_RTC_CTRL);
+ } while (!(status & BIT(31)));
+
+ return (((u64)h) << 32) | l;
+}
+
+static notrace u64 arc_rtc_clock_read(void)
+{
+ return arc_read_rtc(NULL);
+}
+
+static struct clocksource arc_counter_rtc = {
+ .name = "ARCv2 RTC",
+ .rating = 350,
+ .read = arc_read_rtc,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init arc_cs_setup_rtc(struct device_node *node)
+{
+ struct bcr_timer timer;
+ int ret;
+
+ READ_BCR(ARC_REG_TIMERS_BCR, timer);
+ if (!timer.rtc) {
+ pr_warn("Local-64-bit-Ctr clocksource not detected\n");
+ return -ENXIO;
+ }
+
+ /* Local to CPU hence not usable in SMP */
+ if (IS_ENABLED(CONFIG_SMP)) {
+ pr_warn("Local-64-bit-Ctr not usable in SMP\n");
+ return -EINVAL;
+ }
+
+ ret = arc_get_timer_clk(node);
+ if (ret)
+ return ret;
+
+ write_aux_reg(AUX_RTC_CTRL, 1);
+
+ sched_clock_register(arc_rtc_clock_read, 64, arc_timer_freq);
+
+ return clocksource_register_hz(&arc_counter_rtc, arc_timer_freq);
+}
+TIMER_OF_DECLARE(arc_rtc, "snps,archs-timer-rtc", arc_cs_setup_rtc);
+
+#endif
+
+/*
+ * 32bit TIMER1 to keep counting monotonically and wraparound
+ */
+
+static u64 arc_read_timer1(struct clocksource *cs)
+{
+ return (u64) read_aux_reg(ARC_REG_TIMER1_CNT);
+}
+
+static notrace u64 arc_timer1_clock_read(void)
+{
+ return arc_read_timer1(NULL);
+}
+
+static struct clocksource arc_counter_timer1 = {
+ .name = "ARC Timer1",
+ .rating = 300,
+ .read = arc_read_timer1,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init arc_cs_setup_timer1(struct device_node *node)
+{
+ int ret;
+
+ /* Local to CPU hence not usable in SMP */
+ if (IS_ENABLED(CONFIG_SMP))
+ return -EINVAL;
+
+ ret = arc_get_timer_clk(node);
+ if (ret)
+ return ret;
+
+ write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMERN_MAX);
+ write_aux_reg(ARC_REG_TIMER1_CNT, 0);
+ write_aux_reg(ARC_REG_TIMER1_CTRL, ARC_TIMER_CTRL_NH);
+
+ sched_clock_register(arc_timer1_clock_read, 32, arc_timer_freq);
+
+ return clocksource_register_hz(&arc_counter_timer1, arc_timer_freq);
+}
+
+/********** Clock Event Device *********/
+
+static int arc_timer_irq;
+
+/*
+ * Arm the timer to interrupt after @cycles
+ * The distinction for oneshot/periodic is done in arc_event_timer_ack() below
+ */
+static void arc_timer_event_setup(unsigned int cycles)
+{
+ write_aux_reg(ARC_REG_TIMER0_LIMIT, cycles);
+ write_aux_reg(ARC_REG_TIMER0_CNT, 0); /* start from 0 */
+
+ write_aux_reg(ARC_REG_TIMER0_CTRL, ARC_TIMER_CTRL_IE | ARC_TIMER_CTRL_NH);
+}
+
+
+static int arc_clkevent_set_next_event(unsigned long delta,
+ struct clock_event_device *dev)
+{
+ arc_timer_event_setup(delta);
+ return 0;
+}
+
+static int arc_clkevent_set_periodic(struct clock_event_device *dev)
+{
+ /*
+ * At X Hz, 1 sec = 1000ms -> X cycles;
+ * 10ms -> X / 100 cycles
+ */
+ arc_timer_event_setup(arc_timer_freq / HZ);
+ return 0;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, arc_clockevent_device) = {
+ .name = "ARC Timer0",
+ .features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_PERIODIC,
+ .rating = 300,
+ .set_next_event = arc_clkevent_set_next_event,
+ .set_state_periodic = arc_clkevent_set_periodic,
+};
+
+static irqreturn_t timer_irq_handler(int irq, void *dev_id)
+{
+ /*
+ * Note that generic IRQ core could have passed @evt for @dev_id if
+ * irq_set_chip_and_handler() asked for handle_percpu_devid_irq()
+ */
+ struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device);
+ int irq_reenable = clockevent_state_periodic(evt);
+
+ /*
+ * 1. ACK the interrupt
+ * - For ARC700, any write to CTRL reg ACKs it, so just rewrite
+ * Count when [N]ot [H]alted bit.
+ * - For HS3x, it is a bit subtle. On taken count-down interrupt,
+ * IP bit [3] is set, which needs to be cleared for ACK'ing.
+ * The write below can only update the other two bits, hence
+ * explicitly clears IP bit
+ * 2. Re-arm interrupt if periodic by writing to IE bit [0]
+ */
+ write_aux_reg(ARC_REG_TIMER0_CTRL, irq_reenable | ARC_TIMER_CTRL_NH);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+
+static int arc_timer_starting_cpu(unsigned int cpu)
+{
+ struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device);
+
+ evt->cpumask = cpumask_of(smp_processor_id());
+
+ clockevents_config_and_register(evt, arc_timer_freq, 0, ARC_TIMERN_MAX);
+ enable_percpu_irq(arc_timer_irq, 0);
+ return 0;
+}
+
+static int arc_timer_dying_cpu(unsigned int cpu)
+{
+ disable_percpu_irq(arc_timer_irq);
+ return 0;
+}
+
+/*
+ * clockevent setup for boot CPU
+ */
+static int __init arc_clockevent_setup(struct device_node *node)
+{
+ struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device);
+ int ret;
+
+ arc_timer_irq = irq_of_parse_and_map(node, 0);
+ if (arc_timer_irq <= 0) {
+ pr_err("clockevent: missing irq\n");
+ return -EINVAL;
+ }
+
+ ret = arc_get_timer_clk(node);
+ if (ret)
+ return ret;
+
+ /* Needs apriori irq_set_percpu_devid() done in intc map function */
+ ret = request_percpu_irq(arc_timer_irq, timer_irq_handler,
+ "Timer0 (per-cpu-tick)", evt);
+ if (ret) {
+ pr_err("clockevent: unable to request irq\n");
+ return ret;
+ }
+
+ ret = cpuhp_setup_state(CPUHP_AP_ARC_TIMER_STARTING,
+ "clockevents/arc/timer:starting",
+ arc_timer_starting_cpu,
+ arc_timer_dying_cpu);
+ if (ret) {
+ pr_err("Failed to setup hotplug state\n");
+ return ret;
+ }
+ return 0;
+}
+
+static int __init arc_of_timer_init(struct device_node *np)
+{
+ static int init_count = 0;
+ int ret;
+
+ if (!init_count) {
+ init_count = 1;
+ ret = arc_clockevent_setup(np);
+ } else {
+ ret = arc_cs_setup_timer1(np);
+ }
+
+ return ret;
+}
+TIMER_OF_DECLARE(arc_clkevt, "snps,arc-timer", arc_of_timer_init);
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
new file mode 100644
index 0000000000..071b04f1ee
--- /dev/null
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -0,0 +1,1818 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/drivers/clocksource/arm_arch_timer.c
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * All Rights Reserved
+ */
+
+#define pr_fmt(fmt) "arch_timer: " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/cpu.h>
+#include <linux/cpu_pm.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/clocksource_ids.h>
+#include <linux/interrupt.h>
+#include <linux/kstrtox.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/sched/clock.h>
+#include <linux/sched_clock.h>
+#include <linux/acpi.h>
+#include <linux/arm-smccc.h>
+#include <linux/ptp_kvm.h>
+
+#include <asm/arch_timer.h>
+#include <asm/virt.h>
+
+#include <clocksource/arm_arch_timer.h>
+
+#define CNTTIDR 0x08
+#define CNTTIDR_VIRT(n) (BIT(1) << ((n) * 4))
+
+#define CNTACR(n) (0x40 + ((n) * 4))
+#define CNTACR_RPCT BIT(0)
+#define CNTACR_RVCT BIT(1)
+#define CNTACR_RFRQ BIT(2)
+#define CNTACR_RVOFF BIT(3)
+#define CNTACR_RWVT BIT(4)
+#define CNTACR_RWPT BIT(5)
+
+#define CNTPCT_LO 0x00
+#define CNTVCT_LO 0x08
+#define CNTFRQ 0x10
+#define CNTP_CVAL_LO 0x20
+#define CNTP_CTL 0x2c
+#define CNTV_CVAL_LO 0x30
+#define CNTV_CTL 0x3c
+
+/*
+ * The minimum amount of time a generic counter is guaranteed to not roll over
+ * (40 years)
+ */
+#define MIN_ROLLOVER_SECS (40ULL * 365 * 24 * 3600)
+
+static unsigned arch_timers_present __initdata;
+
+struct arch_timer {
+ void __iomem *base;
+ struct clock_event_device evt;
+};
+
+static struct arch_timer *arch_timer_mem __ro_after_init;
+
+#define to_arch_timer(e) container_of(e, struct arch_timer, evt)
+
+static u32 arch_timer_rate __ro_after_init;
+static int arch_timer_ppi[ARCH_TIMER_MAX_TIMER_PPI] __ro_after_init;
+
+static const char *arch_timer_ppi_names[ARCH_TIMER_MAX_TIMER_PPI] = {
+ [ARCH_TIMER_PHYS_SECURE_PPI] = "sec-phys",
+ [ARCH_TIMER_PHYS_NONSECURE_PPI] = "phys",
+ [ARCH_TIMER_VIRT_PPI] = "virt",
+ [ARCH_TIMER_HYP_PPI] = "hyp-phys",
+ [ARCH_TIMER_HYP_VIRT_PPI] = "hyp-virt",
+};
+
+static struct clock_event_device __percpu *arch_timer_evt;
+
+static enum arch_timer_ppi_nr arch_timer_uses_ppi __ro_after_init = ARCH_TIMER_VIRT_PPI;
+static bool arch_timer_c3stop __ro_after_init;
+static bool arch_timer_mem_use_virtual __ro_after_init;
+static bool arch_counter_suspend_stop __ro_after_init;
+#ifdef CONFIG_GENERIC_GETTIMEOFDAY
+static enum vdso_clock_mode vdso_default = VDSO_CLOCKMODE_ARCHTIMER;
+#else
+static enum vdso_clock_mode vdso_default = VDSO_CLOCKMODE_NONE;
+#endif /* CONFIG_GENERIC_GETTIMEOFDAY */
+
+static cpumask_t evtstrm_available = CPU_MASK_NONE;
+static bool evtstrm_enable __ro_after_init = IS_ENABLED(CONFIG_ARM_ARCH_TIMER_EVTSTREAM);
+
+static int __init early_evtstrm_cfg(char *buf)
+{
+ return kstrtobool(buf, &evtstrm_enable);
+}
+early_param("clocksource.arm_arch_timer.evtstrm", early_evtstrm_cfg);
+
+/*
+ * Makes an educated guess at a valid counter width based on the Generic Timer
+ * specification. Of note:
+ * 1) the system counter is at least 56 bits wide
+ * 2) a roll-over time of not less than 40 years
+ *
+ * See 'ARM DDI 0487G.a D11.1.2 ("The system counter")' for more details.
+ */
+static int arch_counter_get_width(void)
+{
+ u64 min_cycles = MIN_ROLLOVER_SECS * arch_timer_rate;
+
+ /* guarantee the returned width is within the valid range */
+ return clamp_val(ilog2(min_cycles - 1) + 1, 56, 64);
+}
+
+/*
+ * Architected system timer support.
+ */
+
+static __always_inline
+void arch_timer_reg_write(int access, enum arch_timer_reg reg, u64 val,
+ struct clock_event_device *clk)
+{
+ if (access == ARCH_TIMER_MEM_PHYS_ACCESS) {
+ struct arch_timer *timer = to_arch_timer(clk);
+ switch (reg) {
+ case ARCH_TIMER_REG_CTRL:
+ writel_relaxed((u32)val, timer->base + CNTP_CTL);
+ break;
+ case ARCH_TIMER_REG_CVAL:
+ /*
+ * Not guaranteed to be atomic, so the timer
+ * must be disabled at this point.
+ */
+ writeq_relaxed(val, timer->base + CNTP_CVAL_LO);
+ break;
+ default:
+ BUILD_BUG();
+ }
+ } else if (access == ARCH_TIMER_MEM_VIRT_ACCESS) {
+ struct arch_timer *timer = to_arch_timer(clk);
+ switch (reg) {
+ case ARCH_TIMER_REG_CTRL:
+ writel_relaxed((u32)val, timer->base + CNTV_CTL);
+ break;
+ case ARCH_TIMER_REG_CVAL:
+ /* Same restriction as above */
+ writeq_relaxed(val, timer->base + CNTV_CVAL_LO);
+ break;
+ default:
+ BUILD_BUG();
+ }
+ } else {
+ arch_timer_reg_write_cp15(access, reg, val);
+ }
+}
+
+static __always_inline
+u32 arch_timer_reg_read(int access, enum arch_timer_reg reg,
+ struct clock_event_device *clk)
+{
+ u32 val;
+
+ if (access == ARCH_TIMER_MEM_PHYS_ACCESS) {
+ struct arch_timer *timer = to_arch_timer(clk);
+ switch (reg) {
+ case ARCH_TIMER_REG_CTRL:
+ val = readl_relaxed(timer->base + CNTP_CTL);
+ break;
+ default:
+ BUILD_BUG();
+ }
+ } else if (access == ARCH_TIMER_MEM_VIRT_ACCESS) {
+ struct arch_timer *timer = to_arch_timer(clk);
+ switch (reg) {
+ case ARCH_TIMER_REG_CTRL:
+ val = readl_relaxed(timer->base + CNTV_CTL);
+ break;
+ default:
+ BUILD_BUG();
+ }
+ } else {
+ val = arch_timer_reg_read_cp15(access, reg);
+ }
+
+ return val;
+}
+
+static noinstr u64 raw_counter_get_cntpct_stable(void)
+{
+ return __arch_counter_get_cntpct_stable();
+}
+
+static notrace u64 arch_counter_get_cntpct_stable(void)
+{
+ u64 val;
+ preempt_disable_notrace();
+ val = __arch_counter_get_cntpct_stable();
+ preempt_enable_notrace();
+ return val;
+}
+
+static noinstr u64 arch_counter_get_cntpct(void)
+{
+ return __arch_counter_get_cntpct();
+}
+
+static noinstr u64 raw_counter_get_cntvct_stable(void)
+{
+ return __arch_counter_get_cntvct_stable();
+}
+
+static notrace u64 arch_counter_get_cntvct_stable(void)
+{
+ u64 val;
+ preempt_disable_notrace();
+ val = __arch_counter_get_cntvct_stable();
+ preempt_enable_notrace();
+ return val;
+}
+
+static noinstr u64 arch_counter_get_cntvct(void)
+{
+ return __arch_counter_get_cntvct();
+}
+
+/*
+ * Default to cp15 based access because arm64 uses this function for
+ * sched_clock() before DT is probed and the cp15 method is guaranteed
+ * to exist on arm64. arm doesn't use this before DT is probed so even
+ * if we don't have the cp15 accessors we won't have a problem.
+ */
+u64 (*arch_timer_read_counter)(void) __ro_after_init = arch_counter_get_cntvct;
+EXPORT_SYMBOL_GPL(arch_timer_read_counter);
+
+static u64 arch_counter_read(struct clocksource *cs)
+{
+ return arch_timer_read_counter();
+}
+
+static u64 arch_counter_read_cc(const struct cyclecounter *cc)
+{
+ return arch_timer_read_counter();
+}
+
+static struct clocksource clocksource_counter = {
+ .name = "arch_sys_counter",
+ .id = CSID_ARM_ARCH_COUNTER,
+ .rating = 400,
+ .read = arch_counter_read,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct cyclecounter cyclecounter __ro_after_init = {
+ .read = arch_counter_read_cc,
+};
+
+struct ate_acpi_oem_info {
+ char oem_id[ACPI_OEM_ID_SIZE + 1];
+ char oem_table_id[ACPI_OEM_TABLE_ID_SIZE + 1];
+ u32 oem_revision;
+};
+
+#ifdef CONFIG_FSL_ERRATUM_A008585
+/*
+ * The number of retries is an arbitrary value well beyond the highest number
+ * of iterations the loop has been observed to take.
+ */
+#define __fsl_a008585_read_reg(reg) ({ \
+ u64 _old, _new; \
+ int _retries = 200; \
+ \
+ do { \
+ _old = read_sysreg(reg); \
+ _new = read_sysreg(reg); \
+ _retries--; \
+ } while (unlikely(_old != _new) && _retries); \
+ \
+ WARN_ON_ONCE(!_retries); \
+ _new; \
+})
+
+static u64 notrace fsl_a008585_read_cntpct_el0(void)
+{
+ return __fsl_a008585_read_reg(cntpct_el0);
+}
+
+static u64 notrace fsl_a008585_read_cntvct_el0(void)
+{
+ return __fsl_a008585_read_reg(cntvct_el0);
+}
+#endif
+
+#ifdef CONFIG_HISILICON_ERRATUM_161010101
+/*
+ * Verify whether the value of the second read is larger than the first by
+ * less than 32 is the only way to confirm the value is correct, so clear the
+ * lower 5 bits to check whether the difference is greater than 32 or not.
+ * Theoretically the erratum should not occur more than twice in succession
+ * when reading the system counter, but it is possible that some interrupts
+ * may lead to more than twice read errors, triggering the warning, so setting
+ * the number of retries far beyond the number of iterations the loop has been
+ * observed to take.
+ */
+#define __hisi_161010101_read_reg(reg) ({ \
+ u64 _old, _new; \
+ int _retries = 50; \
+ \
+ do { \
+ _old = read_sysreg(reg); \
+ _new = read_sysreg(reg); \
+ _retries--; \
+ } while (unlikely((_new - _old) >> 5) && _retries); \
+ \
+ WARN_ON_ONCE(!_retries); \
+ _new; \
+})
+
+static u64 notrace hisi_161010101_read_cntpct_el0(void)
+{
+ return __hisi_161010101_read_reg(cntpct_el0);
+}
+
+static u64 notrace hisi_161010101_read_cntvct_el0(void)
+{
+ return __hisi_161010101_read_reg(cntvct_el0);
+}
+
+static struct ate_acpi_oem_info hisi_161010101_oem_info[] = {
+ /*
+ * Note that trailing spaces are required to properly match
+ * the OEM table information.
+ */
+ {
+ .oem_id = "HISI ",
+ .oem_table_id = "HIP05 ",
+ .oem_revision = 0,
+ },
+ {
+ .oem_id = "HISI ",
+ .oem_table_id = "HIP06 ",
+ .oem_revision = 0,
+ },
+ {
+ .oem_id = "HISI ",
+ .oem_table_id = "HIP07 ",
+ .oem_revision = 0,
+ },
+ { /* Sentinel indicating the end of the OEM array */ },
+};
+#endif
+
+#ifdef CONFIG_ARM64_ERRATUM_858921
+static u64 notrace arm64_858921_read_cntpct_el0(void)
+{
+ u64 old, new;
+
+ old = read_sysreg(cntpct_el0);
+ new = read_sysreg(cntpct_el0);
+ return (((old ^ new) >> 32) & 1) ? old : new;
+}
+
+static u64 notrace arm64_858921_read_cntvct_el0(void)
+{
+ u64 old, new;
+
+ old = read_sysreg(cntvct_el0);
+ new = read_sysreg(cntvct_el0);
+ return (((old ^ new) >> 32) & 1) ? old : new;
+}
+#endif
+
+#ifdef CONFIG_SUN50I_ERRATUM_UNKNOWN1
+/*
+ * The low bits of the counter registers are indeterminate while bit 10 or
+ * greater is rolling over. Since the counter value can jump both backward
+ * (7ff -> 000 -> 800) and forward (7ff -> fff -> 800), ignore register values
+ * with all ones or all zeros in the low bits. Bound the loop by the maximum
+ * number of CPU cycles in 3 consecutive 24 MHz counter periods.
+ */
+#define __sun50i_a64_read_reg(reg) ({ \
+ u64 _val; \
+ int _retries = 150; \
+ \
+ do { \
+ _val = read_sysreg(reg); \
+ _retries--; \
+ } while (((_val + 1) & GENMASK(8, 0)) <= 1 && _retries); \
+ \
+ WARN_ON_ONCE(!_retries); \
+ _val; \
+})
+
+static u64 notrace sun50i_a64_read_cntpct_el0(void)
+{
+ return __sun50i_a64_read_reg(cntpct_el0);
+}
+
+static u64 notrace sun50i_a64_read_cntvct_el0(void)
+{
+ return __sun50i_a64_read_reg(cntvct_el0);
+}
+#endif
+
+#ifdef CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND
+DEFINE_PER_CPU(const struct arch_timer_erratum_workaround *, timer_unstable_counter_workaround);
+EXPORT_SYMBOL_GPL(timer_unstable_counter_workaround);
+
+static atomic_t timer_unstable_counter_workaround_in_use = ATOMIC_INIT(0);
+
+/*
+ * Force the inlining of this function so that the register accesses
+ * can be themselves correctly inlined.
+ */
+static __always_inline
+void erratum_set_next_event_generic(const int access, unsigned long evt,
+ struct clock_event_device *clk)
+{
+ unsigned long ctrl;
+ u64 cval;
+
+ ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
+ ctrl |= ARCH_TIMER_CTRL_ENABLE;
+ ctrl &= ~ARCH_TIMER_CTRL_IT_MASK;
+
+ if (access == ARCH_TIMER_PHYS_ACCESS) {
+ cval = evt + arch_counter_get_cntpct_stable();
+ write_sysreg(cval, cntp_cval_el0);
+ } else {
+ cval = evt + arch_counter_get_cntvct_stable();
+ write_sysreg(cval, cntv_cval_el0);
+ }
+
+ arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
+}
+
+static __maybe_unused int erratum_set_next_event_virt(unsigned long evt,
+ struct clock_event_device *clk)
+{
+ erratum_set_next_event_generic(ARCH_TIMER_VIRT_ACCESS, evt, clk);
+ return 0;
+}
+
+static __maybe_unused int erratum_set_next_event_phys(unsigned long evt,
+ struct clock_event_device *clk)
+{
+ erratum_set_next_event_generic(ARCH_TIMER_PHYS_ACCESS, evt, clk);
+ return 0;
+}
+
+static const struct arch_timer_erratum_workaround ool_workarounds[] = {
+#ifdef CONFIG_FSL_ERRATUM_A008585
+ {
+ .match_type = ate_match_dt,
+ .id = "fsl,erratum-a008585",
+ .desc = "Freescale erratum a005858",
+ .read_cntpct_el0 = fsl_a008585_read_cntpct_el0,
+ .read_cntvct_el0 = fsl_a008585_read_cntvct_el0,
+ .set_next_event_phys = erratum_set_next_event_phys,
+ .set_next_event_virt = erratum_set_next_event_virt,
+ },
+#endif
+#ifdef CONFIG_HISILICON_ERRATUM_161010101
+ {
+ .match_type = ate_match_dt,
+ .id = "hisilicon,erratum-161010101",
+ .desc = "HiSilicon erratum 161010101",
+ .read_cntpct_el0 = hisi_161010101_read_cntpct_el0,
+ .read_cntvct_el0 = hisi_161010101_read_cntvct_el0,
+ .set_next_event_phys = erratum_set_next_event_phys,
+ .set_next_event_virt = erratum_set_next_event_virt,
+ },
+ {
+ .match_type = ate_match_acpi_oem_info,
+ .id = hisi_161010101_oem_info,
+ .desc = "HiSilicon erratum 161010101",
+ .read_cntpct_el0 = hisi_161010101_read_cntpct_el0,
+ .read_cntvct_el0 = hisi_161010101_read_cntvct_el0,
+ .set_next_event_phys = erratum_set_next_event_phys,
+ .set_next_event_virt = erratum_set_next_event_virt,
+ },
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_858921
+ {
+ .match_type = ate_match_local_cap_id,
+ .id = (void *)ARM64_WORKAROUND_858921,
+ .desc = "ARM erratum 858921",
+ .read_cntpct_el0 = arm64_858921_read_cntpct_el0,
+ .read_cntvct_el0 = arm64_858921_read_cntvct_el0,
+ .set_next_event_phys = erratum_set_next_event_phys,
+ .set_next_event_virt = erratum_set_next_event_virt,
+ },
+#endif
+#ifdef CONFIG_SUN50I_ERRATUM_UNKNOWN1
+ {
+ .match_type = ate_match_dt,
+ .id = "allwinner,erratum-unknown1",
+ .desc = "Allwinner erratum UNKNOWN1",
+ .read_cntpct_el0 = sun50i_a64_read_cntpct_el0,
+ .read_cntvct_el0 = sun50i_a64_read_cntvct_el0,
+ .set_next_event_phys = erratum_set_next_event_phys,
+ .set_next_event_virt = erratum_set_next_event_virt,
+ },
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1418040
+ {
+ .match_type = ate_match_local_cap_id,
+ .id = (void *)ARM64_WORKAROUND_1418040,
+ .desc = "ARM erratum 1418040",
+ .disable_compat_vdso = true,
+ },
+#endif
+};
+
+typedef bool (*ate_match_fn_t)(const struct arch_timer_erratum_workaround *,
+ const void *);
+
+static
+bool arch_timer_check_dt_erratum(const struct arch_timer_erratum_workaround *wa,
+ const void *arg)
+{
+ const struct device_node *np = arg;
+
+ return of_property_read_bool(np, wa->id);
+}
+
+static
+bool arch_timer_check_local_cap_erratum(const struct arch_timer_erratum_workaround *wa,
+ const void *arg)
+{
+ return this_cpu_has_cap((uintptr_t)wa->id);
+}
+
+
+static
+bool arch_timer_check_acpi_oem_erratum(const struct arch_timer_erratum_workaround *wa,
+ const void *arg)
+{
+ static const struct ate_acpi_oem_info empty_oem_info = {};
+ const struct ate_acpi_oem_info *info = wa->id;
+ const struct acpi_table_header *table = arg;
+
+ /* Iterate over the ACPI OEM info array, looking for a match */
+ while (memcmp(info, &empty_oem_info, sizeof(*info))) {
+ if (!memcmp(info->oem_id, table->oem_id, ACPI_OEM_ID_SIZE) &&
+ !memcmp(info->oem_table_id, table->oem_table_id, ACPI_OEM_TABLE_ID_SIZE) &&
+ info->oem_revision == table->oem_revision)
+ return true;
+
+ info++;
+ }
+
+ return false;
+}
+
+static const struct arch_timer_erratum_workaround *
+arch_timer_iterate_errata(enum arch_timer_erratum_match_type type,
+ ate_match_fn_t match_fn,
+ void *arg)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ool_workarounds); i++) {
+ if (ool_workarounds[i].match_type != type)
+ continue;
+
+ if (match_fn(&ool_workarounds[i], arg))
+ return &ool_workarounds[i];
+ }
+
+ return NULL;
+}
+
+static
+void arch_timer_enable_workaround(const struct arch_timer_erratum_workaround *wa,
+ bool local)
+{
+ int i;
+
+ if (local) {
+ __this_cpu_write(timer_unstable_counter_workaround, wa);
+ } else {
+ for_each_possible_cpu(i)
+ per_cpu(timer_unstable_counter_workaround, i) = wa;
+ }
+
+ if (wa->read_cntvct_el0 || wa->read_cntpct_el0)
+ atomic_set(&timer_unstable_counter_workaround_in_use, 1);
+
+ /*
+ * Don't use the vdso fastpath if errata require using the
+ * out-of-line counter accessor. We may change our mind pretty
+ * late in the game (with a per-CPU erratum, for example), so
+ * change both the default value and the vdso itself.
+ */
+ if (wa->read_cntvct_el0) {
+ clocksource_counter.vdso_clock_mode = VDSO_CLOCKMODE_NONE;
+ vdso_default = VDSO_CLOCKMODE_NONE;
+ } else if (wa->disable_compat_vdso && vdso_default != VDSO_CLOCKMODE_NONE) {
+ vdso_default = VDSO_CLOCKMODE_ARCHTIMER_NOCOMPAT;
+ clocksource_counter.vdso_clock_mode = vdso_default;
+ }
+}
+
+static void arch_timer_check_ool_workaround(enum arch_timer_erratum_match_type type,
+ void *arg)
+{
+ const struct arch_timer_erratum_workaround *wa, *__wa;
+ ate_match_fn_t match_fn = NULL;
+ bool local = false;
+
+ switch (type) {
+ case ate_match_dt:
+ match_fn = arch_timer_check_dt_erratum;
+ break;
+ case ate_match_local_cap_id:
+ match_fn = arch_timer_check_local_cap_erratum;
+ local = true;
+ break;
+ case ate_match_acpi_oem_info:
+ match_fn = arch_timer_check_acpi_oem_erratum;
+ break;
+ default:
+ WARN_ON(1);
+ return;
+ }
+
+ wa = arch_timer_iterate_errata(type, match_fn, arg);
+ if (!wa)
+ return;
+
+ __wa = __this_cpu_read(timer_unstable_counter_workaround);
+ if (__wa && wa != __wa)
+ pr_warn("Can't enable workaround for %s (clashes with %s\n)",
+ wa->desc, __wa->desc);
+
+ if (__wa)
+ return;
+
+ arch_timer_enable_workaround(wa, local);
+ pr_info("Enabling %s workaround for %s\n",
+ local ? "local" : "global", wa->desc);
+}
+
+static bool arch_timer_this_cpu_has_cntvct_wa(void)
+{
+ return has_erratum_handler(read_cntvct_el0);
+}
+
+static bool arch_timer_counter_has_wa(void)
+{
+ return atomic_read(&timer_unstable_counter_workaround_in_use);
+}
+#else
+#define arch_timer_check_ool_workaround(t,a) do { } while(0)
+#define arch_timer_this_cpu_has_cntvct_wa() ({false;})
+#define arch_timer_counter_has_wa() ({false;})
+#endif /* CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND */
+
+static __always_inline irqreturn_t timer_handler(const int access,
+ struct clock_event_device *evt)
+{
+ unsigned long ctrl;
+
+ ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, evt);
+ if (ctrl & ARCH_TIMER_CTRL_IT_STAT) {
+ ctrl |= ARCH_TIMER_CTRL_IT_MASK;
+ arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, evt);
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+static irqreturn_t arch_timer_handler_virt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ return timer_handler(ARCH_TIMER_VIRT_ACCESS, evt);
+}
+
+static irqreturn_t arch_timer_handler_phys(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ return timer_handler(ARCH_TIMER_PHYS_ACCESS, evt);
+}
+
+static irqreturn_t arch_timer_handler_phys_mem(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ return timer_handler(ARCH_TIMER_MEM_PHYS_ACCESS, evt);
+}
+
+static irqreturn_t arch_timer_handler_virt_mem(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ return timer_handler(ARCH_TIMER_MEM_VIRT_ACCESS, evt);
+}
+
+static __always_inline int arch_timer_shutdown(const int access,
+ struct clock_event_device *clk)
+{
+ unsigned long ctrl;
+
+ ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
+ ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
+ arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
+
+ return 0;
+}
+
+static int arch_timer_shutdown_virt(struct clock_event_device *clk)
+{
+ return arch_timer_shutdown(ARCH_TIMER_VIRT_ACCESS, clk);
+}
+
+static int arch_timer_shutdown_phys(struct clock_event_device *clk)
+{
+ return arch_timer_shutdown(ARCH_TIMER_PHYS_ACCESS, clk);
+}
+
+static int arch_timer_shutdown_virt_mem(struct clock_event_device *clk)
+{
+ return arch_timer_shutdown(ARCH_TIMER_MEM_VIRT_ACCESS, clk);
+}
+
+static int arch_timer_shutdown_phys_mem(struct clock_event_device *clk)
+{
+ return arch_timer_shutdown(ARCH_TIMER_MEM_PHYS_ACCESS, clk);
+}
+
+static __always_inline void set_next_event(const int access, unsigned long evt,
+ struct clock_event_device *clk)
+{
+ unsigned long ctrl;
+ u64 cnt;
+
+ ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
+ ctrl |= ARCH_TIMER_CTRL_ENABLE;
+ ctrl &= ~ARCH_TIMER_CTRL_IT_MASK;
+
+ if (access == ARCH_TIMER_PHYS_ACCESS)
+ cnt = __arch_counter_get_cntpct();
+ else
+ cnt = __arch_counter_get_cntvct();
+
+ arch_timer_reg_write(access, ARCH_TIMER_REG_CVAL, evt + cnt, clk);
+ arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
+}
+
+static int arch_timer_set_next_event_virt(unsigned long evt,
+ struct clock_event_device *clk)
+{
+ set_next_event(ARCH_TIMER_VIRT_ACCESS, evt, clk);
+ return 0;
+}
+
+static int arch_timer_set_next_event_phys(unsigned long evt,
+ struct clock_event_device *clk)
+{
+ set_next_event(ARCH_TIMER_PHYS_ACCESS, evt, clk);
+ return 0;
+}
+
+static noinstr u64 arch_counter_get_cnt_mem(struct arch_timer *t, int offset_lo)
+{
+ u32 cnt_lo, cnt_hi, tmp_hi;
+
+ do {
+ cnt_hi = __le32_to_cpu((__le32 __force)__raw_readl(t->base + offset_lo + 4));
+ cnt_lo = __le32_to_cpu((__le32 __force)__raw_readl(t->base + offset_lo));
+ tmp_hi = __le32_to_cpu((__le32 __force)__raw_readl(t->base + offset_lo + 4));
+ } while (cnt_hi != tmp_hi);
+
+ return ((u64) cnt_hi << 32) | cnt_lo;
+}
+
+static __always_inline void set_next_event_mem(const int access, unsigned long evt,
+ struct clock_event_device *clk)
+{
+ struct arch_timer *timer = to_arch_timer(clk);
+ unsigned long ctrl;
+ u64 cnt;
+
+ ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
+
+ /* Timer must be disabled before programming CVAL */
+ if (ctrl & ARCH_TIMER_CTRL_ENABLE) {
+ ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
+ arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
+ }
+
+ ctrl |= ARCH_TIMER_CTRL_ENABLE;
+ ctrl &= ~ARCH_TIMER_CTRL_IT_MASK;
+
+ if (access == ARCH_TIMER_MEM_VIRT_ACCESS)
+ cnt = arch_counter_get_cnt_mem(timer, CNTVCT_LO);
+ else
+ cnt = arch_counter_get_cnt_mem(timer, CNTPCT_LO);
+
+ arch_timer_reg_write(access, ARCH_TIMER_REG_CVAL, evt + cnt, clk);
+ arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
+}
+
+static int arch_timer_set_next_event_virt_mem(unsigned long evt,
+ struct clock_event_device *clk)
+{
+ set_next_event_mem(ARCH_TIMER_MEM_VIRT_ACCESS, evt, clk);
+ return 0;
+}
+
+static int arch_timer_set_next_event_phys_mem(unsigned long evt,
+ struct clock_event_device *clk)
+{
+ set_next_event_mem(ARCH_TIMER_MEM_PHYS_ACCESS, evt, clk);
+ return 0;
+}
+
+static u64 __arch_timer_check_delta(void)
+{
+#ifdef CONFIG_ARM64
+ const struct midr_range broken_cval_midrs[] = {
+ /*
+ * XGene-1 implements CVAL in terms of TVAL, meaning
+ * that the maximum timer range is 32bit. Shame on them.
+ *
+ * Note that TVAL is signed, thus has only 31 of its
+ * 32 bits to express magnitude.
+ */
+ MIDR_REV_RANGE(MIDR_CPU_MODEL(ARM_CPU_IMP_APM,
+ APM_CPU_PART_XGENE),
+ APM_CPU_VAR_POTENZA, 0x0, 0xf),
+ {},
+ };
+
+ if (is_midr_in_range_list(read_cpuid_id(), broken_cval_midrs)) {
+ pr_warn_once("Broken CNTx_CVAL_EL1, using 31 bit TVAL instead.\n");
+ return CLOCKSOURCE_MASK(31);
+ }
+#endif
+ return CLOCKSOURCE_MASK(arch_counter_get_width());
+}
+
+static void __arch_timer_setup(unsigned type,
+ struct clock_event_device *clk)
+{
+ u64 max_delta;
+
+ clk->features = CLOCK_EVT_FEAT_ONESHOT;
+
+ if (type == ARCH_TIMER_TYPE_CP15) {
+ typeof(clk->set_next_event) sne;
+
+ arch_timer_check_ool_workaround(ate_match_local_cap_id, NULL);
+
+ if (arch_timer_c3stop)
+ clk->features |= CLOCK_EVT_FEAT_C3STOP;
+ clk->name = "arch_sys_timer";
+ clk->rating = 450;
+ clk->cpumask = cpumask_of(smp_processor_id());
+ clk->irq = arch_timer_ppi[arch_timer_uses_ppi];
+ switch (arch_timer_uses_ppi) {
+ case ARCH_TIMER_VIRT_PPI:
+ clk->set_state_shutdown = arch_timer_shutdown_virt;
+ clk->set_state_oneshot_stopped = arch_timer_shutdown_virt;
+ sne = erratum_handler(set_next_event_virt);
+ break;
+ case ARCH_TIMER_PHYS_SECURE_PPI:
+ case ARCH_TIMER_PHYS_NONSECURE_PPI:
+ case ARCH_TIMER_HYP_PPI:
+ clk->set_state_shutdown = arch_timer_shutdown_phys;
+ clk->set_state_oneshot_stopped = arch_timer_shutdown_phys;
+ sne = erratum_handler(set_next_event_phys);
+ break;
+ default:
+ BUG();
+ }
+
+ clk->set_next_event = sne;
+ max_delta = __arch_timer_check_delta();
+ } else {
+ clk->features |= CLOCK_EVT_FEAT_DYNIRQ;
+ clk->name = "arch_mem_timer";
+ clk->rating = 400;
+ clk->cpumask = cpu_possible_mask;
+ if (arch_timer_mem_use_virtual) {
+ clk->set_state_shutdown = arch_timer_shutdown_virt_mem;
+ clk->set_state_oneshot_stopped = arch_timer_shutdown_virt_mem;
+ clk->set_next_event =
+ arch_timer_set_next_event_virt_mem;
+ } else {
+ clk->set_state_shutdown = arch_timer_shutdown_phys_mem;
+ clk->set_state_oneshot_stopped = arch_timer_shutdown_phys_mem;
+ clk->set_next_event =
+ arch_timer_set_next_event_phys_mem;
+ }
+
+ max_delta = CLOCKSOURCE_MASK(56);
+ }
+
+ clk->set_state_shutdown(clk);
+
+ clockevents_config_and_register(clk, arch_timer_rate, 0xf, max_delta);
+}
+
+static void arch_timer_evtstrm_enable(unsigned int divider)
+{
+ u32 cntkctl = arch_timer_get_cntkctl();
+
+#ifdef CONFIG_ARM64
+ /* ECV is likely to require a large divider. Use the EVNTIS flag. */
+ if (cpus_have_const_cap(ARM64_HAS_ECV) && divider > 15) {
+ cntkctl |= ARCH_TIMER_EVT_INTERVAL_SCALE;
+ divider -= 8;
+ }
+#endif
+
+ divider = min(divider, 15U);
+ cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK;
+ /* Set the divider and enable virtual event stream */
+ cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT)
+ | ARCH_TIMER_VIRT_EVT_EN;
+ arch_timer_set_cntkctl(cntkctl);
+ arch_timer_set_evtstrm_feature();
+ cpumask_set_cpu(smp_processor_id(), &evtstrm_available);
+}
+
+static void arch_timer_configure_evtstream(void)
+{
+ int evt_stream_div, lsb;
+
+ /*
+ * As the event stream can at most be generated at half the frequency
+ * of the counter, use half the frequency when computing the divider.
+ */
+ evt_stream_div = arch_timer_rate / ARCH_TIMER_EVT_STREAM_FREQ / 2;
+
+ /*
+ * Find the closest power of two to the divisor. If the adjacent bit
+ * of lsb (last set bit, starts from 0) is set, then we use (lsb + 1).
+ */
+ lsb = fls(evt_stream_div) - 1;
+ if (lsb > 0 && (evt_stream_div & BIT(lsb - 1)))
+ lsb++;
+
+ /* enable event stream */
+ arch_timer_evtstrm_enable(max(0, lsb));
+}
+
+static void arch_counter_set_user_access(void)
+{
+ u32 cntkctl = arch_timer_get_cntkctl();
+
+ /* Disable user access to the timers and both counters */
+ /* Also disable virtual event stream */
+ cntkctl &= ~(ARCH_TIMER_USR_PT_ACCESS_EN
+ | ARCH_TIMER_USR_VT_ACCESS_EN
+ | ARCH_TIMER_USR_VCT_ACCESS_EN
+ | ARCH_TIMER_VIRT_EVT_EN
+ | ARCH_TIMER_USR_PCT_ACCESS_EN);
+
+ /*
+ * Enable user access to the virtual counter if it doesn't
+ * need to be workaround. The vdso may have been already
+ * disabled though.
+ */
+ if (arch_timer_this_cpu_has_cntvct_wa())
+ pr_info("CPU%d: Trapping CNTVCT access\n", smp_processor_id());
+ else
+ cntkctl |= ARCH_TIMER_USR_VCT_ACCESS_EN;
+
+ arch_timer_set_cntkctl(cntkctl);
+}
+
+static bool arch_timer_has_nonsecure_ppi(void)
+{
+ return (arch_timer_uses_ppi == ARCH_TIMER_PHYS_SECURE_PPI &&
+ arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI]);
+}
+
+static u32 check_ppi_trigger(int irq)
+{
+ u32 flags = irq_get_trigger_type(irq);
+
+ if (flags != IRQF_TRIGGER_HIGH && flags != IRQF_TRIGGER_LOW) {
+ pr_warn("WARNING: Invalid trigger for IRQ%d, assuming level low\n", irq);
+ pr_warn("WARNING: Please fix your firmware\n");
+ flags = IRQF_TRIGGER_LOW;
+ }
+
+ return flags;
+}
+
+static int arch_timer_starting_cpu(unsigned int cpu)
+{
+ struct clock_event_device *clk = this_cpu_ptr(arch_timer_evt);
+ u32 flags;
+
+ __arch_timer_setup(ARCH_TIMER_TYPE_CP15, clk);
+
+ flags = check_ppi_trigger(arch_timer_ppi[arch_timer_uses_ppi]);
+ enable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi], flags);
+
+ if (arch_timer_has_nonsecure_ppi()) {
+ flags = check_ppi_trigger(arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI]);
+ enable_percpu_irq(arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI],
+ flags);
+ }
+
+ arch_counter_set_user_access();
+ if (evtstrm_enable)
+ arch_timer_configure_evtstream();
+
+ return 0;
+}
+
+static int validate_timer_rate(void)
+{
+ if (!arch_timer_rate)
+ return -EINVAL;
+
+ /* Arch timer frequency < 1MHz can cause trouble */
+ WARN_ON(arch_timer_rate < 1000000);
+
+ return 0;
+}
+
+/*
+ * For historical reasons, when probing with DT we use whichever (non-zero)
+ * rate was probed first, and don't verify that others match. If the first node
+ * probed has a clock-frequency property, this overrides the HW register.
+ */
+static void __init arch_timer_of_configure_rate(u32 rate, struct device_node *np)
+{
+ /* Who has more than one independent system counter? */
+ if (arch_timer_rate)
+ return;
+
+ if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate))
+ arch_timer_rate = rate;
+
+ /* Check the timer frequency. */
+ if (validate_timer_rate())
+ pr_warn("frequency not available\n");
+}
+
+static void __init arch_timer_banner(unsigned type)
+{
+ pr_info("%s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n",
+ type & ARCH_TIMER_TYPE_CP15 ? "cp15" : "",
+ type == (ARCH_TIMER_TYPE_CP15 | ARCH_TIMER_TYPE_MEM) ?
+ " and " : "",
+ type & ARCH_TIMER_TYPE_MEM ? "mmio" : "",
+ (unsigned long)arch_timer_rate / 1000000,
+ (unsigned long)(arch_timer_rate / 10000) % 100,
+ type & ARCH_TIMER_TYPE_CP15 ?
+ (arch_timer_uses_ppi == ARCH_TIMER_VIRT_PPI) ? "virt" : "phys" :
+ "",
+ type == (ARCH_TIMER_TYPE_CP15 | ARCH_TIMER_TYPE_MEM) ? "/" : "",
+ type & ARCH_TIMER_TYPE_MEM ?
+ arch_timer_mem_use_virtual ? "virt" : "phys" :
+ "");
+}
+
+u32 arch_timer_get_rate(void)
+{
+ return arch_timer_rate;
+}
+
+bool arch_timer_evtstrm_available(void)
+{
+ /*
+ * We might get called from a preemptible context. This is fine
+ * because availability of the event stream should be always the same
+ * for a preemptible context and context where we might resume a task.
+ */
+ return cpumask_test_cpu(raw_smp_processor_id(), &evtstrm_available);
+}
+
+static noinstr u64 arch_counter_get_cntvct_mem(void)
+{
+ return arch_counter_get_cnt_mem(arch_timer_mem, CNTVCT_LO);
+}
+
+static struct arch_timer_kvm_info arch_timer_kvm_info;
+
+struct arch_timer_kvm_info *arch_timer_get_kvm_info(void)
+{
+ return &arch_timer_kvm_info;
+}
+
+static void __init arch_counter_register(unsigned type)
+{
+ u64 (*scr)(void);
+ u64 start_count;
+ int width;
+
+ /* Register the CP15 based counter if we have one */
+ if (type & ARCH_TIMER_TYPE_CP15) {
+ u64 (*rd)(void);
+
+ if ((IS_ENABLED(CONFIG_ARM64) && !is_hyp_mode_available()) ||
+ arch_timer_uses_ppi == ARCH_TIMER_VIRT_PPI) {
+ if (arch_timer_counter_has_wa()) {
+ rd = arch_counter_get_cntvct_stable;
+ scr = raw_counter_get_cntvct_stable;
+ } else {
+ rd = arch_counter_get_cntvct;
+ scr = arch_counter_get_cntvct;
+ }
+ } else {
+ if (arch_timer_counter_has_wa()) {
+ rd = arch_counter_get_cntpct_stable;
+ scr = raw_counter_get_cntpct_stable;
+ } else {
+ rd = arch_counter_get_cntpct;
+ scr = arch_counter_get_cntpct;
+ }
+ }
+
+ arch_timer_read_counter = rd;
+ clocksource_counter.vdso_clock_mode = vdso_default;
+ } else {
+ arch_timer_read_counter = arch_counter_get_cntvct_mem;
+ scr = arch_counter_get_cntvct_mem;
+ }
+
+ width = arch_counter_get_width();
+ clocksource_counter.mask = CLOCKSOURCE_MASK(width);
+ cyclecounter.mask = CLOCKSOURCE_MASK(width);
+
+ if (!arch_counter_suspend_stop)
+ clocksource_counter.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
+ start_count = arch_timer_read_counter();
+ clocksource_register_hz(&clocksource_counter, arch_timer_rate);
+ cyclecounter.mult = clocksource_counter.mult;
+ cyclecounter.shift = clocksource_counter.shift;
+ timecounter_init(&arch_timer_kvm_info.timecounter,
+ &cyclecounter, start_count);
+
+ sched_clock_register(scr, width, arch_timer_rate);
+}
+
+static void arch_timer_stop(struct clock_event_device *clk)
+{
+ pr_debug("disable IRQ%d cpu #%d\n", clk->irq, smp_processor_id());
+
+ disable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi]);
+ if (arch_timer_has_nonsecure_ppi())
+ disable_percpu_irq(arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI]);
+
+ clk->set_state_shutdown(clk);
+}
+
+static int arch_timer_dying_cpu(unsigned int cpu)
+{
+ struct clock_event_device *clk = this_cpu_ptr(arch_timer_evt);
+
+ cpumask_clear_cpu(smp_processor_id(), &evtstrm_available);
+
+ arch_timer_stop(clk);
+ return 0;
+}
+
+#ifdef CONFIG_CPU_PM
+static DEFINE_PER_CPU(unsigned long, saved_cntkctl);
+static int arch_timer_cpu_pm_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ if (action == CPU_PM_ENTER) {
+ __this_cpu_write(saved_cntkctl, arch_timer_get_cntkctl());
+
+ cpumask_clear_cpu(smp_processor_id(), &evtstrm_available);
+ } else if (action == CPU_PM_ENTER_FAILED || action == CPU_PM_EXIT) {
+ arch_timer_set_cntkctl(__this_cpu_read(saved_cntkctl));
+
+ if (arch_timer_have_evtstrm_feature())
+ cpumask_set_cpu(smp_processor_id(), &evtstrm_available);
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block arch_timer_cpu_pm_notifier = {
+ .notifier_call = arch_timer_cpu_pm_notify,
+};
+
+static int __init arch_timer_cpu_pm_init(void)
+{
+ return cpu_pm_register_notifier(&arch_timer_cpu_pm_notifier);
+}
+
+static void __init arch_timer_cpu_pm_deinit(void)
+{
+ WARN_ON(cpu_pm_unregister_notifier(&arch_timer_cpu_pm_notifier));
+}
+
+#else
+static int __init arch_timer_cpu_pm_init(void)
+{
+ return 0;
+}
+
+static void __init arch_timer_cpu_pm_deinit(void)
+{
+}
+#endif
+
+static int __init arch_timer_register(void)
+{
+ int err;
+ int ppi;
+
+ arch_timer_evt = alloc_percpu(struct clock_event_device);
+ if (!arch_timer_evt) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ ppi = arch_timer_ppi[arch_timer_uses_ppi];
+ switch (arch_timer_uses_ppi) {
+ case ARCH_TIMER_VIRT_PPI:
+ err = request_percpu_irq(ppi, arch_timer_handler_virt,
+ "arch_timer", arch_timer_evt);
+ break;
+ case ARCH_TIMER_PHYS_SECURE_PPI:
+ case ARCH_TIMER_PHYS_NONSECURE_PPI:
+ err = request_percpu_irq(ppi, arch_timer_handler_phys,
+ "arch_timer", arch_timer_evt);
+ if (!err && arch_timer_has_nonsecure_ppi()) {
+ ppi = arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI];
+ err = request_percpu_irq(ppi, arch_timer_handler_phys,
+ "arch_timer", arch_timer_evt);
+ if (err)
+ free_percpu_irq(arch_timer_ppi[ARCH_TIMER_PHYS_SECURE_PPI],
+ arch_timer_evt);
+ }
+ break;
+ case ARCH_TIMER_HYP_PPI:
+ err = request_percpu_irq(ppi, arch_timer_handler_phys,
+ "arch_timer", arch_timer_evt);
+ break;
+ default:
+ BUG();
+ }
+
+ if (err) {
+ pr_err("can't register interrupt %d (%d)\n", ppi, err);
+ goto out_free;
+ }
+
+ err = arch_timer_cpu_pm_init();
+ if (err)
+ goto out_unreg_notify;
+
+ /* Register and immediately configure the timer on the boot CPU */
+ err = cpuhp_setup_state(CPUHP_AP_ARM_ARCH_TIMER_STARTING,
+ "clockevents/arm/arch_timer:starting",
+ arch_timer_starting_cpu, arch_timer_dying_cpu);
+ if (err)
+ goto out_unreg_cpupm;
+ return 0;
+
+out_unreg_cpupm:
+ arch_timer_cpu_pm_deinit();
+
+out_unreg_notify:
+ free_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi], arch_timer_evt);
+ if (arch_timer_has_nonsecure_ppi())
+ free_percpu_irq(arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI],
+ arch_timer_evt);
+
+out_free:
+ free_percpu(arch_timer_evt);
+out:
+ return err;
+}
+
+static int __init arch_timer_mem_register(void __iomem *base, unsigned int irq)
+{
+ int ret;
+ irq_handler_t func;
+
+ arch_timer_mem = kzalloc(sizeof(*arch_timer_mem), GFP_KERNEL);
+ if (!arch_timer_mem)
+ return -ENOMEM;
+
+ arch_timer_mem->base = base;
+ arch_timer_mem->evt.irq = irq;
+ __arch_timer_setup(ARCH_TIMER_TYPE_MEM, &arch_timer_mem->evt);
+
+ if (arch_timer_mem_use_virtual)
+ func = arch_timer_handler_virt_mem;
+ else
+ func = arch_timer_handler_phys_mem;
+
+ ret = request_irq(irq, func, IRQF_TIMER, "arch_mem_timer", &arch_timer_mem->evt);
+ if (ret) {
+ pr_err("Failed to request mem timer irq\n");
+ kfree(arch_timer_mem);
+ arch_timer_mem = NULL;
+ }
+
+ return ret;
+}
+
+static const struct of_device_id arch_timer_of_match[] __initconst = {
+ { .compatible = "arm,armv7-timer", },
+ { .compatible = "arm,armv8-timer", },
+ {},
+};
+
+static const struct of_device_id arch_timer_mem_of_match[] __initconst = {
+ { .compatible = "arm,armv7-timer-mem", },
+ {},
+};
+
+static bool __init arch_timer_needs_of_probing(void)
+{
+ struct device_node *dn;
+ bool needs_probing = false;
+ unsigned int mask = ARCH_TIMER_TYPE_CP15 | ARCH_TIMER_TYPE_MEM;
+
+ /* We have two timers, and both device-tree nodes are probed. */
+ if ((arch_timers_present & mask) == mask)
+ return false;
+
+ /*
+ * Only one type of timer is probed,
+ * check if we have another type of timer node in device-tree.
+ */
+ if (arch_timers_present & ARCH_TIMER_TYPE_CP15)
+ dn = of_find_matching_node(NULL, arch_timer_mem_of_match);
+ else
+ dn = of_find_matching_node(NULL, arch_timer_of_match);
+
+ if (dn && of_device_is_available(dn))
+ needs_probing = true;
+
+ of_node_put(dn);
+
+ return needs_probing;
+}
+
+static int __init arch_timer_common_init(void)
+{
+ arch_timer_banner(arch_timers_present);
+ arch_counter_register(arch_timers_present);
+ return arch_timer_arch_init();
+}
+
+/**
+ * arch_timer_select_ppi() - Select suitable PPI for the current system.
+ *
+ * If HYP mode is available, we know that the physical timer
+ * has been configured to be accessible from PL1. Use it, so
+ * that a guest can use the virtual timer instead.
+ *
+ * On ARMv8.1 with VH extensions, the kernel runs in HYP. VHE
+ * accesses to CNTP_*_EL1 registers are silently redirected to
+ * their CNTHP_*_EL2 counterparts, and use a different PPI
+ * number.
+ *
+ * If no interrupt provided for virtual timer, we'll have to
+ * stick to the physical timer. It'd better be accessible...
+ * For arm64 we never use the secure interrupt.
+ *
+ * Return: a suitable PPI type for the current system.
+ */
+static enum arch_timer_ppi_nr __init arch_timer_select_ppi(void)
+{
+ if (is_kernel_in_hyp_mode())
+ return ARCH_TIMER_HYP_PPI;
+
+ if (!is_hyp_mode_available() && arch_timer_ppi[ARCH_TIMER_VIRT_PPI])
+ return ARCH_TIMER_VIRT_PPI;
+
+ if (IS_ENABLED(CONFIG_ARM64))
+ return ARCH_TIMER_PHYS_NONSECURE_PPI;
+
+ return ARCH_TIMER_PHYS_SECURE_PPI;
+}
+
+static void __init arch_timer_populate_kvm_info(void)
+{
+ arch_timer_kvm_info.virtual_irq = arch_timer_ppi[ARCH_TIMER_VIRT_PPI];
+ if (is_kernel_in_hyp_mode())
+ arch_timer_kvm_info.physical_irq = arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI];
+}
+
+static int __init arch_timer_of_init(struct device_node *np)
+{
+ int i, irq, ret;
+ u32 rate;
+ bool has_names;
+
+ if (arch_timers_present & ARCH_TIMER_TYPE_CP15) {
+ pr_warn("multiple nodes in dt, skipping\n");
+ return 0;
+ }
+
+ arch_timers_present |= ARCH_TIMER_TYPE_CP15;
+
+ has_names = of_property_read_bool(np, "interrupt-names");
+
+ for (i = ARCH_TIMER_PHYS_SECURE_PPI; i < ARCH_TIMER_MAX_TIMER_PPI; i++) {
+ if (has_names)
+ irq = of_irq_get_byname(np, arch_timer_ppi_names[i]);
+ else
+ irq = of_irq_get(np, i);
+ if (irq > 0)
+ arch_timer_ppi[i] = irq;
+ }
+
+ arch_timer_populate_kvm_info();
+
+ rate = arch_timer_get_cntfrq();
+ arch_timer_of_configure_rate(rate, np);
+
+ arch_timer_c3stop = !of_property_read_bool(np, "always-on");
+
+ /* Check for globally applicable workarounds */
+ arch_timer_check_ool_workaround(ate_match_dt, np);
+
+ /*
+ * If we cannot rely on firmware initializing the timer registers then
+ * we should use the physical timers instead.
+ */
+ if (IS_ENABLED(CONFIG_ARM) &&
+ of_property_read_bool(np, "arm,cpu-registers-not-fw-configured"))
+ arch_timer_uses_ppi = ARCH_TIMER_PHYS_SECURE_PPI;
+ else
+ arch_timer_uses_ppi = arch_timer_select_ppi();
+
+ if (!arch_timer_ppi[arch_timer_uses_ppi]) {
+ pr_err("No interrupt available, giving up\n");
+ return -EINVAL;
+ }
+
+ /* On some systems, the counter stops ticking when in suspend. */
+ arch_counter_suspend_stop = of_property_read_bool(np,
+ "arm,no-tick-in-suspend");
+
+ ret = arch_timer_register();
+ if (ret)
+ return ret;
+
+ if (arch_timer_needs_of_probing())
+ return 0;
+
+ return arch_timer_common_init();
+}
+TIMER_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);
+TIMER_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init);
+
+static u32 __init
+arch_timer_mem_frame_get_cntfrq(struct arch_timer_mem_frame *frame)
+{
+ void __iomem *base;
+ u32 rate;
+
+ base = ioremap(frame->cntbase, frame->size);
+ if (!base) {
+ pr_err("Unable to map frame @ %pa\n", &frame->cntbase);
+ return 0;
+ }
+
+ rate = readl_relaxed(base + CNTFRQ);
+
+ iounmap(base);
+
+ return rate;
+}
+
+static struct arch_timer_mem_frame * __init
+arch_timer_mem_find_best_frame(struct arch_timer_mem *timer_mem)
+{
+ struct arch_timer_mem_frame *frame, *best_frame = NULL;
+ void __iomem *cntctlbase;
+ u32 cnttidr;
+ int i;
+
+ cntctlbase = ioremap(timer_mem->cntctlbase, timer_mem->size);
+ if (!cntctlbase) {
+ pr_err("Can't map CNTCTLBase @ %pa\n",
+ &timer_mem->cntctlbase);
+ return NULL;
+ }
+
+ cnttidr = readl_relaxed(cntctlbase + CNTTIDR);
+
+ /*
+ * Try to find a virtual capable frame. Otherwise fall back to a
+ * physical capable frame.
+ */
+ for (i = 0; i < ARCH_TIMER_MEM_MAX_FRAMES; i++) {
+ u32 cntacr = CNTACR_RFRQ | CNTACR_RWPT | CNTACR_RPCT |
+ CNTACR_RWVT | CNTACR_RVOFF | CNTACR_RVCT;
+
+ frame = &timer_mem->frame[i];
+ if (!frame->valid)
+ continue;
+
+ /* Try enabling everything, and see what sticks */
+ writel_relaxed(cntacr, cntctlbase + CNTACR(i));
+ cntacr = readl_relaxed(cntctlbase + CNTACR(i));
+
+ if ((cnttidr & CNTTIDR_VIRT(i)) &&
+ !(~cntacr & (CNTACR_RWVT | CNTACR_RVCT))) {
+ best_frame = frame;
+ arch_timer_mem_use_virtual = true;
+ break;
+ }
+
+ if (~cntacr & (CNTACR_RWPT | CNTACR_RPCT))
+ continue;
+
+ best_frame = frame;
+ }
+
+ iounmap(cntctlbase);
+
+ return best_frame;
+}
+
+static int __init
+arch_timer_mem_frame_register(struct arch_timer_mem_frame *frame)
+{
+ void __iomem *base;
+ int ret, irq = 0;
+
+ if (arch_timer_mem_use_virtual)
+ irq = frame->virt_irq;
+ else
+ irq = frame->phys_irq;
+
+ if (!irq) {
+ pr_err("Frame missing %s irq.\n",
+ arch_timer_mem_use_virtual ? "virt" : "phys");
+ return -EINVAL;
+ }
+
+ if (!request_mem_region(frame->cntbase, frame->size,
+ "arch_mem_timer"))
+ return -EBUSY;
+
+ base = ioremap(frame->cntbase, frame->size);
+ if (!base) {
+ pr_err("Can't map frame's registers\n");
+ return -ENXIO;
+ }
+
+ ret = arch_timer_mem_register(base, irq);
+ if (ret) {
+ iounmap(base);
+ return ret;
+ }
+
+ arch_timers_present |= ARCH_TIMER_TYPE_MEM;
+
+ return 0;
+}
+
+static int __init arch_timer_mem_of_init(struct device_node *np)
+{
+ struct arch_timer_mem *timer_mem;
+ struct arch_timer_mem_frame *frame;
+ struct device_node *frame_node;
+ struct resource res;
+ int ret = -EINVAL;
+ u32 rate;
+
+ timer_mem = kzalloc(sizeof(*timer_mem), GFP_KERNEL);
+ if (!timer_mem)
+ return -ENOMEM;
+
+ if (of_address_to_resource(np, 0, &res))
+ goto out;
+ timer_mem->cntctlbase = res.start;
+ timer_mem->size = resource_size(&res);
+
+ for_each_available_child_of_node(np, frame_node) {
+ u32 n;
+ struct arch_timer_mem_frame *frame;
+
+ if (of_property_read_u32(frame_node, "frame-number", &n)) {
+ pr_err(FW_BUG "Missing frame-number.\n");
+ of_node_put(frame_node);
+ goto out;
+ }
+ if (n >= ARCH_TIMER_MEM_MAX_FRAMES) {
+ pr_err(FW_BUG "Wrong frame-number, only 0-%u are permitted.\n",
+ ARCH_TIMER_MEM_MAX_FRAMES - 1);
+ of_node_put(frame_node);
+ goto out;
+ }
+ frame = &timer_mem->frame[n];
+
+ if (frame->valid) {
+ pr_err(FW_BUG "Duplicated frame-number.\n");
+ of_node_put(frame_node);
+ goto out;
+ }
+
+ if (of_address_to_resource(frame_node, 0, &res)) {
+ of_node_put(frame_node);
+ goto out;
+ }
+ frame->cntbase = res.start;
+ frame->size = resource_size(&res);
+
+ frame->virt_irq = irq_of_parse_and_map(frame_node,
+ ARCH_TIMER_VIRT_SPI);
+ frame->phys_irq = irq_of_parse_and_map(frame_node,
+ ARCH_TIMER_PHYS_SPI);
+
+ frame->valid = true;
+ }
+
+ frame = arch_timer_mem_find_best_frame(timer_mem);
+ if (!frame) {
+ pr_err("Unable to find a suitable frame in timer @ %pa\n",
+ &timer_mem->cntctlbase);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ rate = arch_timer_mem_frame_get_cntfrq(frame);
+ arch_timer_of_configure_rate(rate, np);
+
+ ret = arch_timer_mem_frame_register(frame);
+ if (!ret && !arch_timer_needs_of_probing())
+ ret = arch_timer_common_init();
+out:
+ kfree(timer_mem);
+ return ret;
+}
+TIMER_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
+ arch_timer_mem_of_init);
+
+#ifdef CONFIG_ACPI_GTDT
+static int __init
+arch_timer_mem_verify_cntfrq(struct arch_timer_mem *timer_mem)
+{
+ struct arch_timer_mem_frame *frame;
+ u32 rate;
+ int i;
+
+ for (i = 0; i < ARCH_TIMER_MEM_MAX_FRAMES; i++) {
+ frame = &timer_mem->frame[i];
+
+ if (!frame->valid)
+ continue;
+
+ rate = arch_timer_mem_frame_get_cntfrq(frame);
+ if (rate == arch_timer_rate)
+ continue;
+
+ pr_err(FW_BUG "CNTFRQ mismatch: frame @ %pa: (0x%08lx), CPU: (0x%08lx)\n",
+ &frame->cntbase,
+ (unsigned long)rate, (unsigned long)arch_timer_rate);
+
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int __init arch_timer_mem_acpi_init(int platform_timer_count)
+{
+ struct arch_timer_mem *timers, *timer;
+ struct arch_timer_mem_frame *frame, *best_frame = NULL;
+ int timer_count, i, ret = 0;
+
+ timers = kcalloc(platform_timer_count, sizeof(*timers),
+ GFP_KERNEL);
+ if (!timers)
+ return -ENOMEM;
+
+ ret = acpi_arch_timer_mem_init(timers, &timer_count);
+ if (ret || !timer_count)
+ goto out;
+
+ /*
+ * While unlikely, it's theoretically possible that none of the frames
+ * in a timer expose the combination of feature we want.
+ */
+ for (i = 0; i < timer_count; i++) {
+ timer = &timers[i];
+
+ frame = arch_timer_mem_find_best_frame(timer);
+ if (!best_frame)
+ best_frame = frame;
+
+ ret = arch_timer_mem_verify_cntfrq(timer);
+ if (ret) {
+ pr_err("Disabling MMIO timers due to CNTFRQ mismatch\n");
+ goto out;
+ }
+
+ if (!best_frame) /* implies !frame */
+ /*
+ * Only complain about missing suitable frames if we
+ * haven't already found one in a previous iteration.
+ */
+ pr_err("Unable to find a suitable frame in timer @ %pa\n",
+ &timer->cntctlbase);
+ }
+
+ if (best_frame)
+ ret = arch_timer_mem_frame_register(best_frame);
+out:
+ kfree(timers);
+ return ret;
+}
+
+/* Initialize per-processor generic timer and memory-mapped timer(if present) */
+static int __init arch_timer_acpi_init(struct acpi_table_header *table)
+{
+ int ret, platform_timer_count;
+
+ if (arch_timers_present & ARCH_TIMER_TYPE_CP15) {
+ pr_warn("already initialized, skipping\n");
+ return -EINVAL;
+ }
+
+ arch_timers_present |= ARCH_TIMER_TYPE_CP15;
+
+ ret = acpi_gtdt_init(table, &platform_timer_count);
+ if (ret)
+ return ret;
+
+ arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI] =
+ acpi_gtdt_map_ppi(ARCH_TIMER_PHYS_NONSECURE_PPI);
+
+ arch_timer_ppi[ARCH_TIMER_VIRT_PPI] =
+ acpi_gtdt_map_ppi(ARCH_TIMER_VIRT_PPI);
+
+ arch_timer_ppi[ARCH_TIMER_HYP_PPI] =
+ acpi_gtdt_map_ppi(ARCH_TIMER_HYP_PPI);
+
+ arch_timer_populate_kvm_info();
+
+ /*
+ * When probing via ACPI, we have no mechanism to override the sysreg
+ * CNTFRQ value. This *must* be correct.
+ */
+ arch_timer_rate = arch_timer_get_cntfrq();
+ ret = validate_timer_rate();
+ if (ret) {
+ pr_err(FW_BUG "frequency not available.\n");
+ return ret;
+ }
+
+ arch_timer_uses_ppi = arch_timer_select_ppi();
+ if (!arch_timer_ppi[arch_timer_uses_ppi]) {
+ pr_err("No interrupt available, giving up\n");
+ return -EINVAL;
+ }
+
+ /* Always-on capability */
+ arch_timer_c3stop = acpi_gtdt_c3stop(arch_timer_uses_ppi);
+
+ /* Check for globally applicable workarounds */
+ arch_timer_check_ool_workaround(ate_match_acpi_oem_info, table);
+
+ ret = arch_timer_register();
+ if (ret)
+ return ret;
+
+ if (platform_timer_count &&
+ arch_timer_mem_acpi_init(platform_timer_count))
+ pr_err("Failed to initialize memory-mapped timer.\n");
+
+ return arch_timer_common_init();
+}
+TIMER_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
+#endif
+
+int kvm_arch_ptp_get_crosststamp(u64 *cycle, struct timespec64 *ts,
+ struct clocksource **cs)
+{
+ struct arm_smccc_res hvc_res;
+ u32 ptp_counter;
+ ktime_t ktime;
+
+ if (!IS_ENABLED(CONFIG_HAVE_ARM_SMCCC_DISCOVERY))
+ return -EOPNOTSUPP;
+
+ if (arch_timer_uses_ppi == ARCH_TIMER_VIRT_PPI)
+ ptp_counter = KVM_PTP_VIRT_COUNTER;
+ else
+ ptp_counter = KVM_PTP_PHYS_COUNTER;
+
+ arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID,
+ ptp_counter, &hvc_res);
+
+ if ((int)(hvc_res.a0) < 0)
+ return -EOPNOTSUPP;
+
+ ktime = (u64)hvc_res.a0 << 32 | hvc_res.a1;
+ *ts = ktime_to_timespec64(ktime);
+ if (cycle)
+ *cycle = (u64)hvc_res.a2 << 32 | hvc_res.a3;
+ if (cs)
+ *cs = &clocksource_counter;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(kvm_arch_ptp_get_crosststamp);
diff --git a/drivers/clocksource/arm_global_timer.c b/drivers/clocksource/arm_global_timer.c
new file mode 100644
index 0000000000..44a61dc6f9
--- /dev/null
+++ b/drivers/clocksource/arm_global_timer.c
@@ -0,0 +1,442 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * drivers/clocksource/arm_global_timer.c
+ *
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Stuart Menefy <stuart.menefy@st.com>
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/sched_clock.h>
+
+#include <asm/cputype.h>
+
+#define GT_COUNTER0 0x00
+#define GT_COUNTER1 0x04
+
+#define GT_CONTROL 0x08
+#define GT_CONTROL_TIMER_ENABLE BIT(0) /* this bit is NOT banked */
+#define GT_CONTROL_COMP_ENABLE BIT(1) /* banked */
+#define GT_CONTROL_IRQ_ENABLE BIT(2) /* banked */
+#define GT_CONTROL_AUTO_INC BIT(3) /* banked */
+#define GT_CONTROL_PRESCALER_SHIFT 8
+#define GT_CONTROL_PRESCALER_MAX 0xF
+#define GT_CONTROL_PRESCALER_MASK (GT_CONTROL_PRESCALER_MAX << \
+ GT_CONTROL_PRESCALER_SHIFT)
+
+#define GT_INT_STATUS 0x0c
+#define GT_INT_STATUS_EVENT_FLAG BIT(0)
+
+#define GT_COMP0 0x10
+#define GT_COMP1 0x14
+#define GT_AUTO_INC 0x18
+
+#define MAX_F_ERR 50
+/*
+ * We are expecting to be clocked by the ARM peripheral clock.
+ *
+ * Note: it is assumed we are using a prescaler value of zero, so this is
+ * the units for all operations.
+ */
+static void __iomem *gt_base;
+static struct notifier_block gt_clk_rate_change_nb;
+static u32 gt_psv_new, gt_psv_bck, gt_target_rate;
+static int gt_ppi;
+static struct clock_event_device __percpu *gt_evt;
+
+/*
+ * To get the value from the Global Timer Counter register proceed as follows:
+ * 1. Read the upper 32-bit timer counter register
+ * 2. Read the lower 32-bit timer counter register
+ * 3. Read the upper 32-bit timer counter register again. If the value is
+ * different to the 32-bit upper value read previously, go back to step 2.
+ * Otherwise the 64-bit timer counter value is correct.
+ */
+static u64 notrace _gt_counter_read(void)
+{
+ u64 counter;
+ u32 lower;
+ u32 upper, old_upper;
+
+ upper = readl_relaxed(gt_base + GT_COUNTER1);
+ do {
+ old_upper = upper;
+ lower = readl_relaxed(gt_base + GT_COUNTER0);
+ upper = readl_relaxed(gt_base + GT_COUNTER1);
+ } while (upper != old_upper);
+
+ counter = upper;
+ counter <<= 32;
+ counter |= lower;
+ return counter;
+}
+
+static u64 gt_counter_read(void)
+{
+ return _gt_counter_read();
+}
+
+/**
+ * To ensure that updates to comparator value register do not set the
+ * Interrupt Status Register proceed as follows:
+ * 1. Clear the Comp Enable bit in the Timer Control Register.
+ * 2. Write the lower 32-bit Comparator Value Register.
+ * 3. Write the upper 32-bit Comparator Value Register.
+ * 4. Set the Comp Enable bit and, if necessary, the IRQ enable bit.
+ */
+static void gt_compare_set(unsigned long delta, int periodic)
+{
+ u64 counter = gt_counter_read();
+ unsigned long ctrl;
+
+ counter += delta;
+ ctrl = readl(gt_base + GT_CONTROL);
+ ctrl &= ~(GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE |
+ GT_CONTROL_AUTO_INC);
+ ctrl |= GT_CONTROL_TIMER_ENABLE;
+ writel_relaxed(ctrl, gt_base + GT_CONTROL);
+ writel_relaxed(lower_32_bits(counter), gt_base + GT_COMP0);
+ writel_relaxed(upper_32_bits(counter), gt_base + GT_COMP1);
+
+ if (periodic) {
+ writel_relaxed(delta, gt_base + GT_AUTO_INC);
+ ctrl |= GT_CONTROL_AUTO_INC;
+ }
+
+ ctrl |= GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE;
+ writel_relaxed(ctrl, gt_base + GT_CONTROL);
+}
+
+static int gt_clockevent_shutdown(struct clock_event_device *evt)
+{
+ unsigned long ctrl;
+
+ ctrl = readl(gt_base + GT_CONTROL);
+ ctrl &= ~(GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE |
+ GT_CONTROL_AUTO_INC);
+ writel(ctrl, gt_base + GT_CONTROL);
+ return 0;
+}
+
+static int gt_clockevent_set_periodic(struct clock_event_device *evt)
+{
+ gt_compare_set(DIV_ROUND_CLOSEST(gt_target_rate, HZ), 1);
+ return 0;
+}
+
+static int gt_clockevent_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ gt_compare_set(evt, 0);
+ return 0;
+}
+
+static irqreturn_t gt_clockevent_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ if (!(readl_relaxed(gt_base + GT_INT_STATUS) &
+ GT_INT_STATUS_EVENT_FLAG))
+ return IRQ_NONE;
+
+ /**
+ * ERRATA 740657( Global Timer can send 2 interrupts for
+ * the same event in single-shot mode)
+ * Workaround:
+ * Either disable single-shot mode.
+ * Or
+ * Modify the Interrupt Handler to avoid the
+ * offending sequence. This is achieved by clearing
+ * the Global Timer flag _after_ having incremented
+ * the Comparator register value to a higher value.
+ */
+ if (clockevent_state_oneshot(evt))
+ gt_compare_set(ULONG_MAX, 0);
+
+ writel_relaxed(GT_INT_STATUS_EVENT_FLAG, gt_base + GT_INT_STATUS);
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static int gt_starting_cpu(unsigned int cpu)
+{
+ struct clock_event_device *clk = this_cpu_ptr(gt_evt);
+
+ clk->name = "arm_global_timer";
+ clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_PERCPU;
+ clk->set_state_shutdown = gt_clockevent_shutdown;
+ clk->set_state_periodic = gt_clockevent_set_periodic;
+ clk->set_state_oneshot = gt_clockevent_shutdown;
+ clk->set_state_oneshot_stopped = gt_clockevent_shutdown;
+ clk->set_next_event = gt_clockevent_set_next_event;
+ clk->cpumask = cpumask_of(cpu);
+ clk->rating = 300;
+ clk->irq = gt_ppi;
+ clockevents_config_and_register(clk, gt_target_rate,
+ 1, 0xffffffff);
+ enable_percpu_irq(clk->irq, IRQ_TYPE_NONE);
+ return 0;
+}
+
+static int gt_dying_cpu(unsigned int cpu)
+{
+ struct clock_event_device *clk = this_cpu_ptr(gt_evt);
+
+ gt_clockevent_shutdown(clk);
+ disable_percpu_irq(clk->irq);
+ return 0;
+}
+
+static u64 gt_clocksource_read(struct clocksource *cs)
+{
+ return gt_counter_read();
+}
+
+static void gt_resume(struct clocksource *cs)
+{
+ unsigned long ctrl;
+
+ ctrl = readl(gt_base + GT_CONTROL);
+ if (!(ctrl & GT_CONTROL_TIMER_ENABLE))
+ /* re-enable timer on resume */
+ writel(GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL);
+}
+
+static struct clocksource gt_clocksource = {
+ .name = "arm_global_timer",
+ .rating = 300,
+ .read = gt_clocksource_read,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .resume = gt_resume,
+};
+
+#ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
+static u64 notrace gt_sched_clock_read(void)
+{
+ return _gt_counter_read();
+}
+#endif
+
+static unsigned long gt_read_long(void)
+{
+ return readl_relaxed(gt_base + GT_COUNTER0);
+}
+
+static struct delay_timer gt_delay_timer = {
+ .read_current_timer = gt_read_long,
+};
+
+static void gt_write_presc(u32 psv)
+{
+ u32 reg;
+
+ reg = readl(gt_base + GT_CONTROL);
+ reg &= ~GT_CONTROL_PRESCALER_MASK;
+ reg |= psv << GT_CONTROL_PRESCALER_SHIFT;
+ writel(reg, gt_base + GT_CONTROL);
+}
+
+static u32 gt_read_presc(void)
+{
+ u32 reg;
+
+ reg = readl(gt_base + GT_CONTROL);
+ reg &= GT_CONTROL_PRESCALER_MASK;
+ return reg >> GT_CONTROL_PRESCALER_SHIFT;
+}
+
+static void __init gt_delay_timer_init(void)
+{
+ gt_delay_timer.freq = gt_target_rate;
+ register_current_timer_delay(&gt_delay_timer);
+}
+
+static int __init gt_clocksource_init(void)
+{
+ writel(0, gt_base + GT_CONTROL);
+ writel(0, gt_base + GT_COUNTER0);
+ writel(0, gt_base + GT_COUNTER1);
+ /* set prescaler and enable timer on all the cores */
+ writel(((CONFIG_ARM_GT_INITIAL_PRESCALER_VAL - 1) <<
+ GT_CONTROL_PRESCALER_SHIFT)
+ | GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL);
+
+#ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
+ sched_clock_register(gt_sched_clock_read, 64, gt_target_rate);
+#endif
+ return clocksource_register_hz(&gt_clocksource, gt_target_rate);
+}
+
+static int gt_clk_rate_change_cb(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct clk_notifier_data *ndata = data;
+
+ switch (event) {
+ case PRE_RATE_CHANGE:
+ {
+ int psv;
+
+ psv = DIV_ROUND_CLOSEST(ndata->new_rate,
+ gt_target_rate);
+
+ if (abs(gt_target_rate - (ndata->new_rate / psv)) > MAX_F_ERR)
+ return NOTIFY_BAD;
+
+ psv--;
+
+ /* prescaler within legal range? */
+ if (psv < 0 || psv > GT_CONTROL_PRESCALER_MAX)
+ return NOTIFY_BAD;
+
+ /*
+ * store timer clock ctrl register so we can restore it in case
+ * of an abort.
+ */
+ gt_psv_bck = gt_read_presc();
+ gt_psv_new = psv;
+ /* scale down: adjust divider in post-change notification */
+ if (ndata->new_rate < ndata->old_rate)
+ return NOTIFY_DONE;
+
+ /* scale up: adjust divider now - before frequency change */
+ gt_write_presc(psv);
+ break;
+ }
+ case POST_RATE_CHANGE:
+ /* scale up: pre-change notification did the adjustment */
+ if (ndata->new_rate > ndata->old_rate)
+ return NOTIFY_OK;
+
+ /* scale down: adjust divider now - after frequency change */
+ gt_write_presc(gt_psv_new);
+ break;
+
+ case ABORT_RATE_CHANGE:
+ /* we have to undo the adjustment in case we scale up */
+ if (ndata->new_rate < ndata->old_rate)
+ return NOTIFY_OK;
+
+ /* restore original register value */
+ gt_write_presc(gt_psv_bck);
+ break;
+ default:
+ return NOTIFY_DONE;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static int __init global_timer_of_register(struct device_node *np)
+{
+ struct clk *gt_clk;
+ static unsigned long gt_clk_rate;
+ int err = 0;
+
+ /*
+ * In A9 r2p0 the comparators for each processor with the global timer
+ * fire when the timer value is greater than or equal to. In previous
+ * revisions the comparators fired when the timer value was equal to.
+ */
+ if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9
+ && (read_cpuid_id() & 0xf0000f) < 0x200000) {
+ pr_warn("global-timer: non support for this cpu version.\n");
+ return -ENOSYS;
+ }
+
+ gt_ppi = irq_of_parse_and_map(np, 0);
+ if (!gt_ppi) {
+ pr_warn("global-timer: unable to parse irq\n");
+ return -EINVAL;
+ }
+
+ gt_base = of_iomap(np, 0);
+ if (!gt_base) {
+ pr_warn("global-timer: invalid base address\n");
+ return -ENXIO;
+ }
+
+ gt_clk = of_clk_get(np, 0);
+ if (!IS_ERR(gt_clk)) {
+ err = clk_prepare_enable(gt_clk);
+ if (err)
+ goto out_unmap;
+ } else {
+ pr_warn("global-timer: clk not found\n");
+ err = -EINVAL;
+ goto out_unmap;
+ }
+
+ gt_clk_rate = clk_get_rate(gt_clk);
+ gt_target_rate = gt_clk_rate / CONFIG_ARM_GT_INITIAL_PRESCALER_VAL;
+ gt_clk_rate_change_nb.notifier_call =
+ gt_clk_rate_change_cb;
+ err = clk_notifier_register(gt_clk, &gt_clk_rate_change_nb);
+ if (err) {
+ pr_warn("Unable to register clock notifier\n");
+ goto out_clk;
+ }
+
+ gt_evt = alloc_percpu(struct clock_event_device);
+ if (!gt_evt) {
+ pr_warn("global-timer: can't allocate memory\n");
+ err = -ENOMEM;
+ goto out_clk_nb;
+ }
+
+ err = request_percpu_irq(gt_ppi, gt_clockevent_interrupt,
+ "gt", gt_evt);
+ if (err) {
+ pr_warn("global-timer: can't register interrupt %d (%d)\n",
+ gt_ppi, err);
+ goto out_free;
+ }
+
+ /* Register and immediately configure the timer on the boot CPU */
+ err = gt_clocksource_init();
+ if (err)
+ goto out_irq;
+
+ err = cpuhp_setup_state(CPUHP_AP_ARM_GLOBAL_TIMER_STARTING,
+ "clockevents/arm/global_timer:starting",
+ gt_starting_cpu, gt_dying_cpu);
+ if (err)
+ goto out_irq;
+
+ gt_delay_timer_init();
+
+ return 0;
+
+out_irq:
+ free_percpu_irq(gt_ppi, gt_evt);
+out_free:
+ free_percpu(gt_evt);
+out_clk_nb:
+ clk_notifier_unregister(gt_clk, &gt_clk_rate_change_nb);
+out_clk:
+ clk_disable_unprepare(gt_clk);
+out_unmap:
+ iounmap(gt_base);
+ WARN(err, "ARM Global timer register failed (%d)\n", err);
+
+ return err;
+}
+
+/* Only tested on r2p2 and r3p0 */
+TIMER_OF_DECLARE(arm_gt, "arm,cortex-a9-global-timer",
+ global_timer_of_register);
diff --git a/drivers/clocksource/armv7m_systick.c b/drivers/clocksource/armv7m_systick.c
new file mode 100644
index 0000000000..7e78074480
--- /dev/null
+++ b/drivers/clocksource/armv7m_systick.c
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) Maxime Coquelin 2015
+ * Author: Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk.h>
+#include <linux/bitops.h>
+
+#define SYST_CSR 0x00
+#define SYST_RVR 0x04
+#define SYST_CVR 0x08
+#define SYST_CALIB 0x0c
+
+#define SYST_CSR_ENABLE BIT(0)
+
+#define SYSTICK_LOAD_RELOAD_MASK 0x00FFFFFF
+
+static int __init system_timer_of_register(struct device_node *np)
+{
+ struct clk *clk = NULL;
+ void __iomem *base;
+ u32 rate;
+ int ret;
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ pr_warn("system-timer: invalid base address\n");
+ return -ENXIO;
+ }
+
+ ret = of_property_read_u32(np, "clock-frequency", &rate);
+ if (ret) {
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ goto out_unmap;
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ goto out_clk_put;
+
+ rate = clk_get_rate(clk);
+ if (!rate) {
+ ret = -EINVAL;
+ goto out_clk_disable;
+ }
+ }
+
+ writel_relaxed(SYSTICK_LOAD_RELOAD_MASK, base + SYST_RVR);
+ writel_relaxed(SYST_CSR_ENABLE, base + SYST_CSR);
+
+ ret = clocksource_mmio_init(base + SYST_CVR, "arm_system_timer", rate,
+ 200, 24, clocksource_mmio_readl_down);
+ if (ret) {
+ pr_err("failed to init clocksource (%d)\n", ret);
+ if (clk)
+ goto out_clk_disable;
+ else
+ goto out_unmap;
+ }
+
+ pr_info("ARM System timer initialized as clocksource\n");
+
+ return 0;
+
+out_clk_disable:
+ clk_disable_unprepare(clk);
+out_clk_put:
+ clk_put(clk);
+out_unmap:
+ iounmap(base);
+ pr_warn("ARM System timer register failed (%d)\n", ret);
+
+ return ret;
+}
+
+TIMER_OF_DECLARE(arm_systick, "arm,armv7m-systick",
+ system_timer_of_register);
diff --git a/drivers/clocksource/asm9260_timer.c b/drivers/clocksource/asm9260_timer.c
new file mode 100644
index 0000000000..5b39d3701f
--- /dev/null
+++ b/drivers/clocksource/asm9260_timer.c
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/bitops.h>
+
+#define DRIVER_NAME "asm9260-timer"
+
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+#define SET_REG 4
+#define CLR_REG 8
+
+#define HW_IR 0x0000 /* RW. Interrupt */
+#define BM_IR_CR0 BIT(4)
+#define BM_IR_MR3 BIT(3)
+#define BM_IR_MR2 BIT(2)
+#define BM_IR_MR1 BIT(1)
+#define BM_IR_MR0 BIT(0)
+
+#define HW_TCR 0x0010 /* RW. Timer controller */
+/* BM_C*_RST
+ * Timer Counter and the Prescale Counter are synchronously reset on the
+ * next positive edge of PCLK. The counters remain reset until TCR[1] is
+ * returned to zero. */
+#define BM_C3_RST BIT(7)
+#define BM_C2_RST BIT(6)
+#define BM_C1_RST BIT(5)
+#define BM_C0_RST BIT(4)
+/* BM_C*_EN
+ * 1 - Timer Counter and Prescale Counter are enabled for counting
+ * 0 - counters are disabled */
+#define BM_C3_EN BIT(3)
+#define BM_C2_EN BIT(2)
+#define BM_C1_EN BIT(1)
+#define BM_C0_EN BIT(0)
+
+#define HW_DIR 0x0020 /* RW. Direction? */
+/* 00 - count up
+ * 01 - count down
+ * 10 - ?? 2^n/2 */
+#define BM_DIR_COUNT_UP 0
+#define BM_DIR_COUNT_DOWN 1
+#define BM_DIR0_SHIFT 0
+#define BM_DIR1_SHIFT 4
+#define BM_DIR2_SHIFT 8
+#define BM_DIR3_SHIFT 12
+#define BM_DIR_DEFAULT (BM_DIR_COUNT_UP << BM_DIR0_SHIFT | \
+ BM_DIR_COUNT_UP << BM_DIR1_SHIFT | \
+ BM_DIR_COUNT_UP << BM_DIR2_SHIFT | \
+ BM_DIR_COUNT_UP << BM_DIR3_SHIFT)
+
+#define HW_TC0 0x0030 /* RO. Timer counter 0 */
+/* HW_TC*. Timer counter owerflow (0xffff.ffff to 0x0000.0000) do not generate
+ * interrupt. This registers can be used to detect overflow */
+#define HW_TC1 0x0040
+#define HW_TC2 0x0050
+#define HW_TC3 0x0060
+
+#define HW_PR 0x0070 /* RW. prescaler */
+#define BM_PR_DISABLE 0
+#define HW_PC 0x0080 /* RO. Prescaler counter */
+#define HW_MCR 0x0090 /* RW. Match control */
+/* enable interrupt on match */
+#define BM_MCR_INT_EN(n) (1 << (n * 3 + 0))
+/* enable TC reset on match */
+#define BM_MCR_RES_EN(n) (1 << (n * 3 + 1))
+/* enable stop TC on match */
+#define BM_MCR_STOP_EN(n) (1 << (n * 3 + 2))
+
+#define HW_MR0 0x00a0 /* RW. Match reg */
+#define HW_MR1 0x00b0
+#define HW_MR2 0x00C0
+#define HW_MR3 0x00D0
+
+#define HW_CTCR 0x0180 /* Counter control */
+#define BM_CTCR0_SHIFT 0
+#define BM_CTCR1_SHIFT 2
+#define BM_CTCR2_SHIFT 4
+#define BM_CTCR3_SHIFT 6
+#define BM_CTCR_TM 0 /* Timer mode. Every rising PCLK edge. */
+#define BM_CTCR_DEFAULT (BM_CTCR_TM << BM_CTCR0_SHIFT | \
+ BM_CTCR_TM << BM_CTCR1_SHIFT | \
+ BM_CTCR_TM << BM_CTCR2_SHIFT | \
+ BM_CTCR_TM << BM_CTCR3_SHIFT)
+
+static struct asm9260_timer_priv {
+ void __iomem *base;
+ unsigned long ticks_per_jiffy;
+} priv;
+
+static int asm9260_timer_set_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ /* configure match count for TC0 */
+ writel_relaxed(delta, priv.base + HW_MR0);
+ /* enable TC0 */
+ writel_relaxed(BM_C0_EN, priv.base + HW_TCR + SET_REG);
+ return 0;
+}
+
+static inline void __asm9260_timer_shutdown(struct clock_event_device *evt)
+{
+ /* stop timer0 */
+ writel_relaxed(BM_C0_EN, priv.base + HW_TCR + CLR_REG);
+}
+
+static int asm9260_timer_shutdown(struct clock_event_device *evt)
+{
+ __asm9260_timer_shutdown(evt);
+ return 0;
+}
+
+static int asm9260_timer_set_oneshot(struct clock_event_device *evt)
+{
+ __asm9260_timer_shutdown(evt);
+
+ /* enable reset and stop on match */
+ writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
+ priv.base + HW_MCR + SET_REG);
+ return 0;
+}
+
+static int asm9260_timer_set_periodic(struct clock_event_device *evt)
+{
+ __asm9260_timer_shutdown(evt);
+
+ /* disable reset and stop on match */
+ writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
+ priv.base + HW_MCR + CLR_REG);
+ /* configure match count for TC0 */
+ writel_relaxed(priv.ticks_per_jiffy, priv.base + HW_MR0);
+ /* enable TC0 */
+ writel_relaxed(BM_C0_EN, priv.base + HW_TCR + SET_REG);
+ return 0;
+}
+
+static struct clock_event_device event_dev = {
+ .name = DRIVER_NAME,
+ .rating = 200,
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = asm9260_timer_set_next_event,
+ .set_state_shutdown = asm9260_timer_shutdown,
+ .set_state_periodic = asm9260_timer_set_periodic,
+ .set_state_oneshot = asm9260_timer_set_oneshot,
+ .tick_resume = asm9260_timer_shutdown,
+};
+
+static irqreturn_t asm9260_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ evt->event_handler(evt);
+
+ writel_relaxed(BM_IR_MR0, priv.base + HW_IR);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * ---------------------------------------------------------------------------
+ * Timer initialization
+ * ---------------------------------------------------------------------------
+ */
+static int __init asm9260_timer_init(struct device_node *np)
+{
+ int irq;
+ struct clk *clk;
+ int ret;
+ unsigned long rate;
+
+ priv.base = of_io_request_and_map(np, 0, np->name);
+ if (IS_ERR(priv.base)) {
+ pr_err("%pOFn: unable to map resource\n", np);
+ return PTR_ERR(priv.base);
+ }
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("Failed to get clk!\n");
+ return PTR_ERR(clk);
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("Failed to enable clk!\n");
+ return ret;
+ }
+
+ irq = irq_of_parse_and_map(np, 0);
+ ret = request_irq(irq, asm9260_timer_interrupt, IRQF_TIMER,
+ DRIVER_NAME, &event_dev);
+ if (ret) {
+ pr_err("Failed to setup irq!\n");
+ return ret;
+ }
+
+ /* set all timers for count-up */
+ writel_relaxed(BM_DIR_DEFAULT, priv.base + HW_DIR);
+ /* disable divider */
+ writel_relaxed(BM_PR_DISABLE, priv.base + HW_PR);
+ /* make sure all timers use every rising PCLK edge. */
+ writel_relaxed(BM_CTCR_DEFAULT, priv.base + HW_CTCR);
+ /* enable interrupt for TC0 and clean setting for all other lines */
+ writel_relaxed(BM_MCR_INT_EN(0) , priv.base + HW_MCR);
+
+ rate = clk_get_rate(clk);
+ clocksource_mmio_init(priv.base + HW_TC1, DRIVER_NAME, rate,
+ 200, 32, clocksource_mmio_readl_up);
+
+ /* Seems like we can't use counter without match register even if
+ * actions for MR are disabled. So, set MR to max value. */
+ writel_relaxed(0xffffffff, priv.base + HW_MR1);
+ /* enable TC1 */
+ writel_relaxed(BM_C1_EN, priv.base + HW_TCR + SET_REG);
+
+ priv.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
+ event_dev.cpumask = cpumask_of(0);
+ clockevents_config_and_register(&event_dev, rate, 0x2c00, 0xfffffffe);
+
+ return 0;
+}
+TIMER_OF_DECLARE(asm9260_timer, "alphascale,asm9260-timer",
+ asm9260_timer_init);
diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c
new file mode 100644
index 0000000000..319c0c780a
--- /dev/null
+++ b/drivers/clocksource/bcm2835_timer.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2012 Simon Arlott
+ */
+
+#include <linux/bitops.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/sched_clock.h>
+
+#include <asm/irq.h>
+
+#define REG_CONTROL 0x00
+#define REG_COUNTER_LO 0x04
+#define REG_COUNTER_HI 0x08
+#define REG_COMPARE(n) (0x0c + (n) * 4)
+#define MAX_TIMER 3
+#define DEFAULT_TIMER 3
+
+struct bcm2835_timer {
+ void __iomem *control;
+ void __iomem *compare;
+ int match_mask;
+ struct clock_event_device evt;
+};
+
+static void __iomem *system_clock __read_mostly;
+
+static u64 notrace bcm2835_sched_read(void)
+{
+ return readl_relaxed(system_clock);
+}
+
+static int bcm2835_time_set_next_event(unsigned long event,
+ struct clock_event_device *evt_dev)
+{
+ struct bcm2835_timer *timer = container_of(evt_dev,
+ struct bcm2835_timer, evt);
+ writel_relaxed(readl_relaxed(system_clock) + event,
+ timer->compare);
+ return 0;
+}
+
+static irqreturn_t bcm2835_time_interrupt(int irq, void *dev_id)
+{
+ struct bcm2835_timer *timer = dev_id;
+ void (*event_handler)(struct clock_event_device *);
+ if (readl_relaxed(timer->control) & timer->match_mask) {
+ writel_relaxed(timer->match_mask, timer->control);
+
+ event_handler = READ_ONCE(timer->evt.event_handler);
+ if (event_handler)
+ event_handler(&timer->evt);
+ return IRQ_HANDLED;
+ } else {
+ return IRQ_NONE;
+ }
+}
+
+static int __init bcm2835_timer_init(struct device_node *node)
+{
+ void __iomem *base;
+ u32 freq;
+ int irq, ret;
+ struct bcm2835_timer *timer;
+
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("Can't remap registers\n");
+ return -ENXIO;
+ }
+
+ ret = of_property_read_u32(node, "clock-frequency", &freq);
+ if (ret) {
+ pr_err("Can't read clock-frequency\n");
+ goto err_iounmap;
+ }
+
+ system_clock = base + REG_COUNTER_LO;
+ sched_clock_register(bcm2835_sched_read, 32, freq);
+
+ clocksource_mmio_init(base + REG_COUNTER_LO, node->name,
+ freq, 300, 32, clocksource_mmio_readl_up);
+
+ irq = irq_of_parse_and_map(node, DEFAULT_TIMER);
+ if (irq <= 0) {
+ pr_err("Can't parse IRQ\n");
+ ret = -EINVAL;
+ goto err_iounmap;
+ }
+
+ timer = kzalloc(sizeof(*timer), GFP_KERNEL);
+ if (!timer) {
+ ret = -ENOMEM;
+ goto err_iounmap;
+ }
+
+ timer->control = base + REG_CONTROL;
+ timer->compare = base + REG_COMPARE(DEFAULT_TIMER);
+ timer->match_mask = BIT(DEFAULT_TIMER);
+ timer->evt.name = node->name;
+ timer->evt.rating = 300;
+ timer->evt.features = CLOCK_EVT_FEAT_ONESHOT;
+ timer->evt.set_next_event = bcm2835_time_set_next_event;
+ timer->evt.cpumask = cpumask_of(0);
+
+ ret = request_irq(irq, bcm2835_time_interrupt, IRQF_TIMER | IRQF_SHARED,
+ node->name, timer);
+ if (ret) {
+ pr_err("Can't set up timer IRQ\n");
+ goto err_timer_free;
+ }
+
+ clockevents_config_and_register(&timer->evt, freq, 0xf, 0xffffffff);
+
+ pr_info("bcm2835: system timer (irq = %d)\n", irq);
+
+ return 0;
+
+err_timer_free:
+ kfree(timer);
+
+err_iounmap:
+ iounmap(base);
+ return ret;
+}
+TIMER_OF_DECLARE(bcm2835, "brcm,bcm2835-system-timer",
+ bcm2835_timer_init);
diff --git a/drivers/clocksource/bcm_kona_timer.c b/drivers/clocksource/bcm_kona_timer.c
new file mode 100644
index 0000000000..39f172d7e2
--- /dev/null
+++ b/drivers/clocksource/bcm_kona_timer.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2012 Broadcom Corporation
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/clockchips.h>
+#include <linux/types.h>
+#include <linux/clk.h>
+
+#include <linux/io.h>
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+
+#define KONA_GPTIMER_STCS_OFFSET 0x00000000
+#define KONA_GPTIMER_STCLO_OFFSET 0x00000004
+#define KONA_GPTIMER_STCHI_OFFSET 0x00000008
+#define KONA_GPTIMER_STCM0_OFFSET 0x0000000C
+
+#define KONA_GPTIMER_STCS_TIMER_MATCH_SHIFT 0
+#define KONA_GPTIMER_STCS_COMPARE_ENABLE_SHIFT 4
+
+struct kona_bcm_timers {
+ int tmr_irq;
+ void __iomem *tmr_regs;
+};
+
+static struct kona_bcm_timers timers;
+
+static u32 arch_timer_rate;
+
+/*
+ * We use the peripheral timers for system tick, the cpu global timer for
+ * profile tick
+ */
+static void kona_timer_disable_and_clear(void __iomem *base)
+{
+ uint32_t reg;
+
+ /*
+ * clear and disable interrupts
+ * We are using compare/match register 0 for our system interrupts
+ */
+ reg = readl(base + KONA_GPTIMER_STCS_OFFSET);
+
+ /* Clear compare (0) interrupt */
+ reg |= 1 << KONA_GPTIMER_STCS_TIMER_MATCH_SHIFT;
+ /* disable compare */
+ reg &= ~(1 << KONA_GPTIMER_STCS_COMPARE_ENABLE_SHIFT);
+
+ writel(reg, base + KONA_GPTIMER_STCS_OFFSET);
+
+}
+
+static int
+kona_timer_get_counter(void __iomem *timer_base, uint32_t *msw, uint32_t *lsw)
+{
+ int loop_limit = 3;
+
+ /*
+ * Read 64-bit free running counter
+ * 1. Read hi-word
+ * 2. Read low-word
+ * 3. Read hi-word again
+ * 4.1
+ * if new hi-word is not equal to previously read hi-word, then
+ * start from #1
+ * 4.2
+ * if new hi-word is equal to previously read hi-word then stop.
+ */
+
+ do {
+ *msw = readl(timer_base + KONA_GPTIMER_STCHI_OFFSET);
+ *lsw = readl(timer_base + KONA_GPTIMER_STCLO_OFFSET);
+ if (*msw == readl(timer_base + KONA_GPTIMER_STCHI_OFFSET))
+ break;
+ } while (--loop_limit);
+ if (!loop_limit) {
+ pr_err("bcm_kona_timer: getting counter failed.\n");
+ pr_err(" Timer will be impacted\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int kona_timer_set_next_event(unsigned long clc,
+ struct clock_event_device *unused)
+{
+ /*
+ * timer (0) is disabled by the timer interrupt already
+ * so, here we reload the next event value and re-enable
+ * the timer.
+ *
+ * This way, we are potentially losing the time between
+ * timer-interrupt->set_next_event. CPU local timers, when
+ * they come in should get rid of skew.
+ */
+
+ uint32_t lsw, msw;
+ uint32_t reg;
+ int ret;
+
+ ret = kona_timer_get_counter(timers.tmr_regs, &msw, &lsw);
+ if (ret)
+ return ret;
+
+ /* Load the "next" event tick value */
+ writel(lsw + clc, timers.tmr_regs + KONA_GPTIMER_STCM0_OFFSET);
+
+ /* Enable compare */
+ reg = readl(timers.tmr_regs + KONA_GPTIMER_STCS_OFFSET);
+ reg |= (1 << KONA_GPTIMER_STCS_COMPARE_ENABLE_SHIFT);
+ writel(reg, timers.tmr_regs + KONA_GPTIMER_STCS_OFFSET);
+
+ return 0;
+}
+
+static int kona_timer_shutdown(struct clock_event_device *evt)
+{
+ kona_timer_disable_and_clear(timers.tmr_regs);
+ return 0;
+}
+
+static struct clock_event_device kona_clockevent_timer = {
+ .name = "timer 1",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = kona_timer_set_next_event,
+ .set_state_shutdown = kona_timer_shutdown,
+ .tick_resume = kona_timer_shutdown,
+};
+
+static void __init kona_timer_clockevents_init(void)
+{
+ kona_clockevent_timer.cpumask = cpumask_of(0);
+ clockevents_config_and_register(&kona_clockevent_timer,
+ arch_timer_rate, 6, 0xffffffff);
+}
+
+static irqreturn_t kona_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &kona_clockevent_timer;
+
+ kona_timer_disable_and_clear(timers.tmr_regs);
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static int __init kona_timer_init(struct device_node *node)
+{
+ u32 freq;
+ struct clk *external_clk;
+
+ external_clk = of_clk_get_by_name(node, NULL);
+
+ if (!IS_ERR(external_clk)) {
+ arch_timer_rate = clk_get_rate(external_clk);
+ clk_prepare_enable(external_clk);
+ } else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
+ arch_timer_rate = freq;
+ } else {
+ pr_err("Kona Timer v1 unable to determine clock-frequency\n");
+ return -EINVAL;
+ }
+
+ /* Setup IRQ numbers */
+ timers.tmr_irq = irq_of_parse_and_map(node, 0);
+
+ /* Setup IO addresses */
+ timers.tmr_regs = of_iomap(node, 0);
+
+ kona_timer_disable_and_clear(timers.tmr_regs);
+
+ kona_timer_clockevents_init();
+ if (request_irq(timers.tmr_irq, kona_timer_interrupt, IRQF_TIMER,
+ "Kona Timer Tick", NULL))
+ pr_err("%s: request_irq() failed\n", "Kona Timer Tick");
+ kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
+
+ return 0;
+}
+
+TIMER_OF_DECLARE(brcm_kona, "brcm,kona-timer", kona_timer_init);
+/*
+ * bcm,kona-timer is deprecated by brcm,kona-timer
+ * being kept here for driver compatibility
+ */
+TIMER_OF_DECLARE(bcm_kona, "bcm,kona-timer", kona_timer_init);
diff --git a/drivers/clocksource/clksrc-dbx500-prcmu.c b/drivers/clocksource/clksrc-dbx500-prcmu.c
new file mode 100644
index 0000000000..2fc93e46ce
--- /dev/null
+++ b/drivers/clocksource/clksrc-dbx500-prcmu.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson
+ * Author: Sundar Iyer for ST-Ericsson
+ * sched_clock implementation is based on:
+ * plat-nomadik/timer.c Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * DBx500-PRCMU Timer
+ * The PRCMU has 5 timers which are available in a always-on
+ * power domain. We use the Timer 4 for our always-on clock
+ * source on DB8500.
+ */
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clockchips.h>
+
+#define RATE_32K 32768
+
+#define TIMER_MODE_CONTINUOUS 0x1
+#define TIMER_DOWNCOUNT_VAL 0xffffffff
+
+#define PRCMU_TIMER_REF 0
+#define PRCMU_TIMER_DOWNCOUNT 0x4
+#define PRCMU_TIMER_MODE 0x8
+
+static void __iomem *clksrc_dbx500_timer_base;
+
+static u64 notrace clksrc_dbx500_prcmu_read(struct clocksource *cs)
+{
+ void __iomem *base = clksrc_dbx500_timer_base;
+ u32 count, count2;
+
+ do {
+ count = readl_relaxed(base + PRCMU_TIMER_DOWNCOUNT);
+ count2 = readl_relaxed(base + PRCMU_TIMER_DOWNCOUNT);
+ } while (count2 != count);
+
+ /* Negate because the timer is a decrementing counter */
+ return ~count;
+}
+
+static struct clocksource clocksource_dbx500_prcmu = {
+ .name = "dbx500-prcmu-timer",
+ .rating = 100,
+ .read = clksrc_dbx500_prcmu_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_SUSPEND_NONSTOP,
+};
+
+static int __init clksrc_dbx500_prcmu_init(struct device_node *node)
+{
+ clksrc_dbx500_timer_base = of_iomap(node, 0);
+
+ /*
+ * The A9 sub system expects the timer to be configured as
+ * a continuous looping timer.
+ * The PRCMU should configure it but if it for some reason
+ * don't we do it here.
+ */
+ if (readl(clksrc_dbx500_timer_base + PRCMU_TIMER_MODE) !=
+ TIMER_MODE_CONTINUOUS) {
+ writel(TIMER_MODE_CONTINUOUS,
+ clksrc_dbx500_timer_base + PRCMU_TIMER_MODE);
+ writel(TIMER_DOWNCOUNT_VAL,
+ clksrc_dbx500_timer_base + PRCMU_TIMER_REF);
+ }
+ return clocksource_register_hz(&clocksource_dbx500_prcmu, RATE_32K);
+}
+TIMER_OF_DECLARE(dbx500_prcmu, "stericsson,db8500-prcmu-timer-4",
+ clksrc_dbx500_prcmu_init);
diff --git a/drivers/clocksource/clksrc_st_lpc.c b/drivers/clocksource/clksrc_st_lpc.c
new file mode 100644
index 0000000000..419a886876
--- /dev/null
+++ b/drivers/clocksource/clksrc_st_lpc.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Clocksource using the Low Power Timer found in the Low Power Controller (LPC)
+ *
+ * Copyright (C) 2015 STMicroelectronics – All Rights Reserved
+ *
+ * Author(s): Francesco Virlinzi <francesco.virlinzi@st.com>
+ * Ajit Pal Singh <ajitpal.singh@st.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/mfd/st-lpc.h>
+
+/* Low Power Timer */
+#define LPC_LPT_LSB_OFF 0x400
+#define LPC_LPT_MSB_OFF 0x404
+#define LPC_LPT_START_OFF 0x408
+
+static struct st_clksrc_ddata {
+ struct clk *clk;
+ void __iomem *base;
+} ddata;
+
+static void __init st_clksrc_reset(void)
+{
+ writel_relaxed(0, ddata.base + LPC_LPT_START_OFF);
+ writel_relaxed(0, ddata.base + LPC_LPT_MSB_OFF);
+ writel_relaxed(0, ddata.base + LPC_LPT_LSB_OFF);
+ writel_relaxed(1, ddata.base + LPC_LPT_START_OFF);
+}
+
+static u64 notrace st_clksrc_sched_clock_read(void)
+{
+ return (u64)readl_relaxed(ddata.base + LPC_LPT_LSB_OFF);
+}
+
+static int __init st_clksrc_init(void)
+{
+ unsigned long rate;
+ int ret;
+
+ st_clksrc_reset();
+
+ rate = clk_get_rate(ddata.clk);
+
+ sched_clock_register(st_clksrc_sched_clock_read, 32, rate);
+
+ ret = clocksource_mmio_init(ddata.base + LPC_LPT_LSB_OFF,
+ "clksrc-st-lpc", rate, 300, 32,
+ clocksource_mmio_readl_up);
+ if (ret) {
+ pr_err("clksrc-st-lpc: Failed to register clocksource\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __init st_clksrc_setup_clk(struct device_node *np)
+{
+ struct clk *clk;
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("clksrc-st-lpc: Failed to get LPC clock\n");
+ return PTR_ERR(clk);
+ }
+
+ if (clk_prepare_enable(clk)) {
+ pr_err("clksrc-st-lpc: Failed to enable LPC clock\n");
+ return -EINVAL;
+ }
+
+ if (!clk_get_rate(clk)) {
+ pr_err("clksrc-st-lpc: Failed to get LPC clock rate\n");
+ clk_disable_unprepare(clk);
+ return -EINVAL;
+ }
+
+ ddata.clk = clk;
+
+ return 0;
+}
+
+static int __init st_clksrc_of_register(struct device_node *np)
+{
+ int ret;
+ uint32_t mode;
+
+ ret = of_property_read_u32(np, "st,lpc-mode", &mode);
+ if (ret) {
+ pr_err("clksrc-st-lpc: An LPC mode must be provided\n");
+ return ret;
+ }
+
+ /* LPC can either run as a Clocksource or in RTC or WDT mode */
+ if (mode != ST_LPC_MODE_CLKSRC)
+ return 0;
+
+ ddata.base = of_iomap(np, 0);
+ if (!ddata.base) {
+ pr_err("clksrc-st-lpc: Unable to map iomem\n");
+ return -ENXIO;
+ }
+
+ ret = st_clksrc_setup_clk(np);
+ if (ret) {
+ iounmap(ddata.base);
+ return ret;
+ }
+
+ ret = st_clksrc_init();
+ if (ret) {
+ clk_disable_unprepare(ddata.clk);
+ clk_put(ddata.clk);
+ iounmap(ddata.base);
+ return ret;
+ }
+
+ pr_info("clksrc-st-lpc: clocksource initialised - running @ %luHz\n",
+ clk_get_rate(ddata.clk));
+
+ return ret;
+}
+TIMER_OF_DECLARE(ddata, "st,stih407-lpc", st_clksrc_of_register);
diff --git a/drivers/clocksource/clps711x-timer.c b/drivers/clocksource/clps711x-timer.c
new file mode 100644
index 0000000000..e95fdc49c2
--- /dev/null
+++ b/drivers/clocksource/clps711x-timer.c
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Cirrus Logic CLPS711X clocksource driver
+ *
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+enum {
+ CLPS711X_CLKSRC_CLOCKSOURCE,
+ CLPS711X_CLKSRC_CLOCKEVENT,
+};
+
+static void __iomem *tcd;
+
+static u64 notrace clps711x_sched_clock_read(void)
+{
+ return ~readw(tcd);
+}
+
+static void __init clps711x_clksrc_init(struct clk *clock, void __iomem *base)
+{
+ unsigned long rate = clk_get_rate(clock);
+
+ tcd = base;
+
+ clocksource_mmio_init(tcd, "clps711x-clocksource", rate, 300, 16,
+ clocksource_mmio_readw_down);
+
+ sched_clock_register(clps711x_sched_clock_read, 16, rate);
+}
+
+static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static int __init _clps711x_clkevt_init(struct clk *clock, void __iomem *base,
+ unsigned int irq)
+{
+ struct clock_event_device *clkevt;
+ unsigned long rate;
+
+ clkevt = kzalloc(sizeof(*clkevt), GFP_KERNEL);
+ if (!clkevt)
+ return -ENOMEM;
+
+ rate = clk_get_rate(clock);
+
+ /* Set Timer prescaler */
+ writew(DIV_ROUND_CLOSEST(rate, HZ), base);
+
+ clkevt->name = "clps711x-clockevent";
+ clkevt->rating = 300;
+ clkevt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_C3STOP;
+ clkevt->cpumask = cpumask_of(0);
+ clockevents_config_and_register(clkevt, HZ, 0, 0);
+
+ return request_irq(irq, clps711x_timer_interrupt, IRQF_TIMER,
+ "clps711x-timer", clkevt);
+}
+
+static int __init clps711x_timer_init(struct device_node *np)
+{
+ unsigned int irq = irq_of_parse_and_map(np, 0);
+ struct clk *clock = of_clk_get(np, 0);
+ void __iomem *base = of_iomap(np, 0);
+
+ if (!base)
+ return -ENOMEM;
+ if (!irq)
+ return -EINVAL;
+ if (IS_ERR(clock))
+ return PTR_ERR(clock);
+
+ switch (of_alias_get_id(np, "timer")) {
+ case CLPS711X_CLKSRC_CLOCKSOURCE:
+ clps711x_clksrc_init(clock, base);
+ break;
+ case CLPS711X_CLKSRC_CLOCKEVENT:
+ return _clps711x_clkevt_init(clock, base, irq);
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+TIMER_OF_DECLARE(clps711x, "cirrus,ep7209-timer", clps711x_timer_init);
diff --git a/drivers/clocksource/dummy_timer.c b/drivers/clocksource/dummy_timer.c
new file mode 100644
index 0000000000..6cee6dce56
--- /dev/null
+++ b/drivers/clocksource/dummy_timer.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/drivers/clocksource/dummy_timer.c
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ * All Rights Reserved
+ */
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/percpu.h>
+#include <linux/cpumask.h>
+
+static DEFINE_PER_CPU(struct clock_event_device, dummy_timer_evt);
+
+static int dummy_timer_starting_cpu(unsigned int cpu)
+{
+ struct clock_event_device *evt = per_cpu_ptr(&dummy_timer_evt, cpu);
+
+ evt->name = "dummy_timer";
+ evt->features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_DUMMY;
+ evt->rating = 100;
+ evt->cpumask = cpumask_of(cpu);
+
+ clockevents_register_device(evt);
+ return 0;
+}
+
+static int __init dummy_timer_register(void)
+{
+ return cpuhp_setup_state(CPUHP_AP_DUMMY_TIMER_STARTING,
+ "clockevents/dummy_timer:starting",
+ dummy_timer_starting_cpu, NULL);
+}
+early_initcall(dummy_timer_register);
diff --git a/drivers/clocksource/dw_apb_timer.c b/drivers/clocksource/dw_apb_timer.c
new file mode 100644
index 0000000000..f5f24a95ee
--- /dev/null
+++ b/drivers/clocksource/dw_apb_timer.c
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * (C) Copyright 2009 Intel Corporation
+ * Author: Jacob Pan (jacob.jun.pan@intel.com)
+ *
+ * Shared with ARM platforms, Jamie Iles, Picochip 2011
+ *
+ * Support for the Synopsys DesignWare APB Timers.
+ */
+#include <linux/dw_apb_timer.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#define APBT_MIN_PERIOD 4
+#define APBT_MIN_DELTA_USEC 200
+
+#define APBTMR_N_LOAD_COUNT 0x00
+#define APBTMR_N_CURRENT_VALUE 0x04
+#define APBTMR_N_CONTROL 0x08
+#define APBTMR_N_EOI 0x0c
+#define APBTMR_N_INT_STATUS 0x10
+
+#define APBTMRS_INT_STATUS 0xa0
+#define APBTMRS_EOI 0xa4
+#define APBTMRS_RAW_INT_STATUS 0xa8
+#define APBTMRS_COMP_VERSION 0xac
+
+#define APBTMR_CONTROL_ENABLE (1 << 0)
+/* 1: periodic, 0:free running. */
+#define APBTMR_CONTROL_MODE_PERIODIC (1 << 1)
+#define APBTMR_CONTROL_INT (1 << 2)
+
+static inline struct dw_apb_clock_event_device *
+ced_to_dw_apb_ced(struct clock_event_device *evt)
+{
+ return container_of(evt, struct dw_apb_clock_event_device, ced);
+}
+
+static inline struct dw_apb_clocksource *
+clocksource_to_dw_apb_clocksource(struct clocksource *cs)
+{
+ return container_of(cs, struct dw_apb_clocksource, cs);
+}
+
+static inline u32 apbt_readl(struct dw_apb_timer *timer, unsigned long offs)
+{
+ return readl(timer->base + offs);
+}
+
+static inline void apbt_writel(struct dw_apb_timer *timer, u32 val,
+ unsigned long offs)
+{
+ writel(val, timer->base + offs);
+}
+
+static inline u32 apbt_readl_relaxed(struct dw_apb_timer *timer, unsigned long offs)
+{
+ return readl_relaxed(timer->base + offs);
+}
+
+static inline void apbt_writel_relaxed(struct dw_apb_timer *timer, u32 val,
+ unsigned long offs)
+{
+ writel_relaxed(val, timer->base + offs);
+}
+
+static void apbt_disable_int(struct dw_apb_timer *timer)
+{
+ u32 ctrl = apbt_readl(timer, APBTMR_N_CONTROL);
+
+ ctrl |= APBTMR_CONTROL_INT;
+ apbt_writel(timer, ctrl, APBTMR_N_CONTROL);
+}
+
+/**
+ * dw_apb_clockevent_pause() - stop the clock_event_device from running
+ *
+ * @dw_ced: The APB clock to stop generating events.
+ */
+void dw_apb_clockevent_pause(struct dw_apb_clock_event_device *dw_ced)
+{
+ disable_irq(dw_ced->timer.irq);
+ apbt_disable_int(&dw_ced->timer);
+}
+
+static void apbt_eoi(struct dw_apb_timer *timer)
+{
+ apbt_readl_relaxed(timer, APBTMR_N_EOI);
+}
+
+static irqreturn_t dw_apb_clockevent_irq(int irq, void *data)
+{
+ struct clock_event_device *evt = data;
+ struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
+
+ if (!evt->event_handler) {
+ pr_info("Spurious APBT timer interrupt %d\n", irq);
+ return IRQ_NONE;
+ }
+
+ if (dw_ced->eoi)
+ dw_ced->eoi(&dw_ced->timer);
+
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static void apbt_enable_int(struct dw_apb_timer *timer)
+{
+ u32 ctrl = apbt_readl(timer, APBTMR_N_CONTROL);
+ /* clear pending intr */
+ apbt_readl(timer, APBTMR_N_EOI);
+ ctrl &= ~APBTMR_CONTROL_INT;
+ apbt_writel(timer, ctrl, APBTMR_N_CONTROL);
+}
+
+static int apbt_shutdown(struct clock_event_device *evt)
+{
+ struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
+ u32 ctrl;
+
+ pr_debug("%s CPU %d state=shutdown\n", __func__,
+ cpumask_first(evt->cpumask));
+
+ ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
+ ctrl &= ~APBTMR_CONTROL_ENABLE;
+ apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+ return 0;
+}
+
+static int apbt_set_oneshot(struct clock_event_device *evt)
+{
+ struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
+ u32 ctrl;
+
+ pr_debug("%s CPU %d state=oneshot\n", __func__,
+ cpumask_first(evt->cpumask));
+
+ ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
+ /*
+ * set free running mode, this mode will let timer reload max
+ * timeout which will give time (3min on 25MHz clock) to rearm
+ * the next event, therefore emulate the one-shot mode.
+ */
+ ctrl &= ~APBTMR_CONTROL_ENABLE;
+ ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC;
+
+ apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+ /* write again to set free running mode */
+ apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+
+ /*
+ * DW APB p. 46, load counter with all 1s before starting free
+ * running mode.
+ */
+ apbt_writel(&dw_ced->timer, ~0, APBTMR_N_LOAD_COUNT);
+ ctrl &= ~APBTMR_CONTROL_INT;
+ ctrl |= APBTMR_CONTROL_ENABLE;
+ apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+ return 0;
+}
+
+static int apbt_set_periodic(struct clock_event_device *evt)
+{
+ struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
+ unsigned long period = DIV_ROUND_UP(dw_ced->timer.freq, HZ);
+ u32 ctrl;
+
+ pr_debug("%s CPU %d state=periodic\n", __func__,
+ cpumask_first(evt->cpumask));
+
+ ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
+ ctrl |= APBTMR_CONTROL_MODE_PERIODIC;
+ apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+ /*
+ * DW APB p. 46, have to disable timer before load counter,
+ * may cause sync problem.
+ */
+ ctrl &= ~APBTMR_CONTROL_ENABLE;
+ apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+ udelay(1);
+ pr_debug("Setting clock period %lu for HZ %d\n", period, HZ);
+ apbt_writel(&dw_ced->timer, period, APBTMR_N_LOAD_COUNT);
+ ctrl |= APBTMR_CONTROL_ENABLE;
+ apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+ return 0;
+}
+
+static int apbt_resume(struct clock_event_device *evt)
+{
+ struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
+
+ pr_debug("%s CPU %d state=resume\n", __func__,
+ cpumask_first(evt->cpumask));
+
+ apbt_enable_int(&dw_ced->timer);
+ return 0;
+}
+
+static int apbt_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ u32 ctrl;
+ struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
+
+ /* Disable timer */
+ ctrl = apbt_readl_relaxed(&dw_ced->timer, APBTMR_N_CONTROL);
+ ctrl &= ~APBTMR_CONTROL_ENABLE;
+ apbt_writel_relaxed(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+ /* write new count */
+ apbt_writel_relaxed(&dw_ced->timer, delta, APBTMR_N_LOAD_COUNT);
+ ctrl |= APBTMR_CONTROL_ENABLE;
+ apbt_writel_relaxed(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+
+ return 0;
+}
+
+/**
+ * dw_apb_clockevent_init() - use an APB timer as a clock_event_device
+ *
+ * @cpu: The CPU the events will be targeted at or -1 if CPU affiliation
+ * isn't required.
+ * @name: The name used for the timer and the IRQ for it.
+ * @rating: The rating to give the timer.
+ * @base: I/O base for the timer registers.
+ * @irq: The interrupt number to use for the timer.
+ * @freq: The frequency that the timer counts at.
+ *
+ * This creates a clock_event_device for using with the generic clock layer
+ * but does not start and register it. This should be done with
+ * dw_apb_clockevent_register() as the next step. If this is the first time
+ * it has been called for a timer then the IRQ will be requested, if not it
+ * just be enabled to allow CPU hotplug to avoid repeatedly requesting and
+ * releasing the IRQ.
+ */
+struct dw_apb_clock_event_device *
+dw_apb_clockevent_init(int cpu, const char *name, unsigned rating,
+ void __iomem *base, int irq, unsigned long freq)
+{
+ struct dw_apb_clock_event_device *dw_ced =
+ kzalloc(sizeof(*dw_ced), GFP_KERNEL);
+ int err;
+
+ if (!dw_ced)
+ return NULL;
+
+ dw_ced->timer.base = base;
+ dw_ced->timer.irq = irq;
+ dw_ced->timer.freq = freq;
+
+ clockevents_calc_mult_shift(&dw_ced->ced, freq, APBT_MIN_PERIOD);
+ dw_ced->ced.max_delta_ns = clockevent_delta2ns(0x7fffffff,
+ &dw_ced->ced);
+ dw_ced->ced.max_delta_ticks = 0x7fffffff;
+ dw_ced->ced.min_delta_ns = clockevent_delta2ns(5000, &dw_ced->ced);
+ dw_ced->ced.min_delta_ticks = 5000;
+ dw_ced->ced.cpumask = cpu < 0 ? cpu_possible_mask : cpumask_of(cpu);
+ dw_ced->ced.features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ;
+ dw_ced->ced.set_state_shutdown = apbt_shutdown;
+ dw_ced->ced.set_state_periodic = apbt_set_periodic;
+ dw_ced->ced.set_state_oneshot = apbt_set_oneshot;
+ dw_ced->ced.set_state_oneshot_stopped = apbt_shutdown;
+ dw_ced->ced.tick_resume = apbt_resume;
+ dw_ced->ced.set_next_event = apbt_next_event;
+ dw_ced->ced.irq = dw_ced->timer.irq;
+ dw_ced->ced.rating = rating;
+ dw_ced->ced.name = name;
+
+ dw_ced->eoi = apbt_eoi;
+ err = request_irq(irq, dw_apb_clockevent_irq,
+ IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
+ dw_ced->ced.name, &dw_ced->ced);
+ if (err) {
+ pr_err("failed to request timer irq\n");
+ kfree(dw_ced);
+ dw_ced = NULL;
+ }
+
+ return dw_ced;
+}
+
+/**
+ * dw_apb_clockevent_resume() - resume a clock that has been paused.
+ *
+ * @dw_ced: The APB clock to resume.
+ */
+void dw_apb_clockevent_resume(struct dw_apb_clock_event_device *dw_ced)
+{
+ enable_irq(dw_ced->timer.irq);
+}
+
+/**
+ * dw_apb_clockevent_stop() - stop the clock_event_device and release the IRQ.
+ *
+ * @dw_ced: The APB clock to stop generating the events.
+ */
+void dw_apb_clockevent_stop(struct dw_apb_clock_event_device *dw_ced)
+{
+ free_irq(dw_ced->timer.irq, &dw_ced->ced);
+}
+
+/**
+ * dw_apb_clockevent_register() - register the clock with the generic layer
+ *
+ * @dw_ced: The APB clock to register as a clock_event_device.
+ */
+void dw_apb_clockevent_register(struct dw_apb_clock_event_device *dw_ced)
+{
+ apbt_writel(&dw_ced->timer, 0, APBTMR_N_CONTROL);
+ clockevents_register_device(&dw_ced->ced);
+ apbt_enable_int(&dw_ced->timer);
+}
+
+/**
+ * dw_apb_clocksource_start() - start the clocksource counting.
+ *
+ * @dw_cs: The clocksource to start.
+ *
+ * This is used to start the clocksource before registration and can be used
+ * to enable calibration of timers.
+ */
+void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs)
+{
+ /*
+ * start count down from 0xffff_ffff. this is done by toggling the
+ * enable bit then load initial load count to ~0.
+ */
+ u32 ctrl = apbt_readl(&dw_cs->timer, APBTMR_N_CONTROL);
+
+ ctrl &= ~APBTMR_CONTROL_ENABLE;
+ apbt_writel(&dw_cs->timer, ctrl, APBTMR_N_CONTROL);
+ apbt_writel(&dw_cs->timer, ~0, APBTMR_N_LOAD_COUNT);
+ /* enable, mask interrupt */
+ ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC;
+ ctrl |= (APBTMR_CONTROL_ENABLE | APBTMR_CONTROL_INT);
+ apbt_writel(&dw_cs->timer, ctrl, APBTMR_N_CONTROL);
+ /* read it once to get cached counter value initialized */
+ dw_apb_clocksource_read(dw_cs);
+}
+
+static u64 __apbt_read_clocksource(struct clocksource *cs)
+{
+ u32 current_count;
+ struct dw_apb_clocksource *dw_cs =
+ clocksource_to_dw_apb_clocksource(cs);
+
+ current_count = apbt_readl_relaxed(&dw_cs->timer,
+ APBTMR_N_CURRENT_VALUE);
+
+ return (u64)~current_count;
+}
+
+static void apbt_restart_clocksource(struct clocksource *cs)
+{
+ struct dw_apb_clocksource *dw_cs =
+ clocksource_to_dw_apb_clocksource(cs);
+
+ dw_apb_clocksource_start(dw_cs);
+}
+
+/**
+ * dw_apb_clocksource_init() - use an APB timer as a clocksource.
+ *
+ * @rating: The rating to give the clocksource.
+ * @name: The name for the clocksource.
+ * @base: The I/O base for the timer registers.
+ * @freq: The frequency that the timer counts at.
+ *
+ * This creates a clocksource using an APB timer but does not yet register it
+ * with the clocksource system. This should be done with
+ * dw_apb_clocksource_register() as the next step.
+ */
+struct dw_apb_clocksource *
+dw_apb_clocksource_init(unsigned rating, const char *name, void __iomem *base,
+ unsigned long freq)
+{
+ struct dw_apb_clocksource *dw_cs = kzalloc(sizeof(*dw_cs), GFP_KERNEL);
+
+ if (!dw_cs)
+ return NULL;
+
+ dw_cs->timer.base = base;
+ dw_cs->timer.freq = freq;
+ dw_cs->cs.name = name;
+ dw_cs->cs.rating = rating;
+ dw_cs->cs.read = __apbt_read_clocksource;
+ dw_cs->cs.mask = CLOCKSOURCE_MASK(32);
+ dw_cs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+ dw_cs->cs.resume = apbt_restart_clocksource;
+
+ return dw_cs;
+}
+
+/**
+ * dw_apb_clocksource_register() - register the APB clocksource.
+ *
+ * @dw_cs: The clocksource to register.
+ */
+void dw_apb_clocksource_register(struct dw_apb_clocksource *dw_cs)
+{
+ clocksource_register_hz(&dw_cs->cs, dw_cs->timer.freq);
+}
+
+/**
+ * dw_apb_clocksource_read() - read the current value of a clocksource.
+ *
+ * @dw_cs: The clocksource to read.
+ */
+u64 dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs)
+{
+ return (u64)~apbt_readl(&dw_cs->timer, APBTMR_N_CURRENT_VALUE);
+}
diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
new file mode 100644
index 0000000000..3245eb0c60
--- /dev/null
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Altera Corporation
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * Modified from mach-picoxcell/time.c
+ */
+#include <linux/delay.h>
+#include <linux/dw_apb_timer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/sched_clock.h>
+
+static int __init timer_get_base_and_rate(struct device_node *np,
+ void __iomem **base, u32 *rate)
+{
+ struct clk *timer_clk;
+ struct clk *pclk;
+ struct reset_control *rstc;
+ int ret;
+
+ *base = of_iomap(np, 0);
+
+ if (!*base)
+ panic("Unable to map regs for %pOFn", np);
+
+ /*
+ * Reset the timer if the reset control is available, wiping
+ * out the state the firmware may have left it
+ */
+ rstc = of_reset_control_get(np, NULL);
+ if (!IS_ERR(rstc)) {
+ reset_control_assert(rstc);
+ reset_control_deassert(rstc);
+ }
+
+ /*
+ * Not all implementations use a peripheral clock, so don't panic
+ * if it's not present
+ */
+ pclk = of_clk_get_by_name(np, "pclk");
+ if (!IS_ERR(pclk))
+ if (clk_prepare_enable(pclk))
+ pr_warn("pclk for %pOFn is present, but could not be activated\n",
+ np);
+
+ if (!of_property_read_u32(np, "clock-freq", rate) ||
+ !of_property_read_u32(np, "clock-frequency", rate))
+ return 0;
+
+ timer_clk = of_clk_get_by_name(np, "timer");
+ if (IS_ERR(timer_clk)) {
+ ret = PTR_ERR(timer_clk);
+ goto out_pclk_disable;
+ }
+
+ ret = clk_prepare_enable(timer_clk);
+ if (ret)
+ goto out_timer_clk_put;
+
+ *rate = clk_get_rate(timer_clk);
+ if (!(*rate)) {
+ ret = -EINVAL;
+ goto out_timer_clk_disable;
+ }
+
+ return 0;
+
+out_timer_clk_disable:
+ clk_disable_unprepare(timer_clk);
+out_timer_clk_put:
+ clk_put(timer_clk);
+out_pclk_disable:
+ if (!IS_ERR(pclk)) {
+ clk_disable_unprepare(pclk);
+ clk_put(pclk);
+ }
+ iounmap(*base);
+ return ret;
+}
+
+static int __init add_clockevent(struct device_node *event_timer)
+{
+ void __iomem *iobase;
+ struct dw_apb_clock_event_device *ced;
+ u32 irq, rate;
+ int ret = 0;
+
+ irq = irq_of_parse_and_map(event_timer, 0);
+ if (irq == 0)
+ panic("No IRQ for clock event timer");
+
+ ret = timer_get_base_and_rate(event_timer, &iobase, &rate);
+ if (ret)
+ return ret;
+
+ ced = dw_apb_clockevent_init(-1, event_timer->name, 300, iobase, irq,
+ rate);
+ if (!ced)
+ return -EINVAL;
+
+ dw_apb_clockevent_register(ced);
+
+ return 0;
+}
+
+static void __iomem *sched_io_base;
+static u32 sched_rate;
+
+static int __init add_clocksource(struct device_node *source_timer)
+{
+ void __iomem *iobase;
+ struct dw_apb_clocksource *cs;
+ u32 rate;
+ int ret;
+
+ ret = timer_get_base_and_rate(source_timer, &iobase, &rate);
+ if (ret)
+ return ret;
+
+ cs = dw_apb_clocksource_init(300, source_timer->name, iobase, rate);
+ if (!cs)
+ return -EINVAL;
+
+ dw_apb_clocksource_start(cs);
+ dw_apb_clocksource_register(cs);
+
+ /*
+ * Fallback to use the clocksource as sched_clock if no separate
+ * timer is found. sched_io_base then points to the current_value
+ * register of the clocksource timer.
+ */
+ sched_io_base = iobase + 0x04;
+ sched_rate = rate;
+
+ return 0;
+}
+
+static u64 notrace read_sched_clock(void)
+{
+ return ~readl_relaxed(sched_io_base);
+}
+
+static const struct of_device_id sptimer_ids[] __initconst = {
+ { .compatible = "picochip,pc3x2-rtc" },
+ { /* Sentinel */ },
+};
+
+static void __init init_sched_clock(void)
+{
+ struct device_node *sched_timer;
+
+ sched_timer = of_find_matching_node(NULL, sptimer_ids);
+ if (sched_timer) {
+ timer_get_base_and_rate(sched_timer, &sched_io_base,
+ &sched_rate);
+ of_node_put(sched_timer);
+ }
+
+ sched_clock_register(read_sched_clock, 32, sched_rate);
+}
+
+#ifdef CONFIG_ARM
+static unsigned long dw_apb_delay_timer_read(void)
+{
+ return ~readl_relaxed(sched_io_base);
+}
+
+static struct delay_timer dw_apb_delay_timer = {
+ .read_current_timer = dw_apb_delay_timer_read,
+};
+#endif
+
+static int num_called;
+static int __init dw_apb_timer_init(struct device_node *timer)
+{
+ int ret = 0;
+
+ switch (num_called) {
+ case 1:
+ pr_debug("%s: found clocksource timer\n", __func__);
+ ret = add_clocksource(timer);
+ if (ret)
+ return ret;
+ init_sched_clock();
+#ifdef CONFIG_ARM
+ dw_apb_delay_timer.freq = sched_rate;
+ register_current_timer_delay(&dw_apb_delay_timer);
+#endif
+ break;
+ default:
+ pr_debug("%s: found clockevent timer\n", __func__);
+ ret = add_clockevent(timer);
+ if (ret)
+ return ret;
+ break;
+ }
+
+ num_called++;
+
+ return 0;
+}
+TIMER_OF_DECLARE(pc3x2_timer, "picochip,pc3x2-timer", dw_apb_timer_init);
+TIMER_OF_DECLARE(apb_timer_osc, "snps,dw-apb-timer-osc", dw_apb_timer_init);
+TIMER_OF_DECLARE(apb_timer_sp, "snps,dw-apb-timer-sp", dw_apb_timer_init);
+TIMER_OF_DECLARE(apb_timer, "snps,dw-apb-timer", dw_apb_timer_init);
diff --git a/drivers/clocksource/em_sti.c b/drivers/clocksource/em_sti.c
new file mode 100644
index 0000000000..ca8d29ab70
--- /dev/null
+++ b/drivers/clocksource/em_sti.c
@@ -0,0 +1,365 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Emma Mobile Timer Support - STI
+ *
+ * Copyright (C) 2012 Magnus Damm
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+enum { USER_CLOCKSOURCE, USER_CLOCKEVENT, USER_NR };
+
+struct em_sti_priv {
+ void __iomem *base;
+ struct clk *clk;
+ struct platform_device *pdev;
+ unsigned int active[USER_NR];
+ unsigned long rate;
+ raw_spinlock_t lock;
+ struct clock_event_device ced;
+ struct clocksource cs;
+};
+
+#define STI_CONTROL 0x00
+#define STI_COMPA_H 0x10
+#define STI_COMPA_L 0x14
+#define STI_COMPB_H 0x18
+#define STI_COMPB_L 0x1c
+#define STI_COUNT_H 0x20
+#define STI_COUNT_L 0x24
+#define STI_COUNT_RAW_H 0x28
+#define STI_COUNT_RAW_L 0x2c
+#define STI_SET_H 0x30
+#define STI_SET_L 0x34
+#define STI_INTSTATUS 0x40
+#define STI_INTRAWSTATUS 0x44
+#define STI_INTENSET 0x48
+#define STI_INTENCLR 0x4c
+#define STI_INTFFCLR 0x50
+
+static inline unsigned long em_sti_read(struct em_sti_priv *p, int offs)
+{
+ return ioread32(p->base + offs);
+}
+
+static inline void em_sti_write(struct em_sti_priv *p, int offs,
+ unsigned long value)
+{
+ iowrite32(value, p->base + offs);
+}
+
+static int em_sti_enable(struct em_sti_priv *p)
+{
+ int ret;
+
+ /* enable clock */
+ ret = clk_enable(p->clk);
+ if (ret) {
+ dev_err(&p->pdev->dev, "cannot enable clock\n");
+ return ret;
+ }
+
+ /* reset the counter */
+ em_sti_write(p, STI_SET_H, 0x40000000);
+ em_sti_write(p, STI_SET_L, 0x00000000);
+
+ /* mask and clear pending interrupts */
+ em_sti_write(p, STI_INTENCLR, 3);
+ em_sti_write(p, STI_INTFFCLR, 3);
+
+ /* enable updates of counter registers */
+ em_sti_write(p, STI_CONTROL, 1);
+
+ return 0;
+}
+
+static void em_sti_disable(struct em_sti_priv *p)
+{
+ /* mask interrupts */
+ em_sti_write(p, STI_INTENCLR, 3);
+
+ /* stop clock */
+ clk_disable(p->clk);
+}
+
+static u64 em_sti_count(struct em_sti_priv *p)
+{
+ u64 ticks;
+ unsigned long flags;
+
+ /* the STI hardware buffers the 48-bit count, but to
+ * break it out into two 32-bit access the registers
+ * must be accessed in a certain order.
+ * Always read STI_COUNT_H before STI_COUNT_L.
+ */
+ raw_spin_lock_irqsave(&p->lock, flags);
+ ticks = (u64)(em_sti_read(p, STI_COUNT_H) & 0xffff) << 32;
+ ticks |= em_sti_read(p, STI_COUNT_L);
+ raw_spin_unlock_irqrestore(&p->lock, flags);
+
+ return ticks;
+}
+
+static u64 em_sti_set_next(struct em_sti_priv *p, u64 next)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&p->lock, flags);
+
+ /* mask compare A interrupt */
+ em_sti_write(p, STI_INTENCLR, 1);
+
+ /* update compare A value */
+ em_sti_write(p, STI_COMPA_H, next >> 32);
+ em_sti_write(p, STI_COMPA_L, next & 0xffffffff);
+
+ /* clear compare A interrupt source */
+ em_sti_write(p, STI_INTFFCLR, 1);
+
+ /* unmask compare A interrupt */
+ em_sti_write(p, STI_INTENSET, 1);
+
+ raw_spin_unlock_irqrestore(&p->lock, flags);
+
+ return next;
+}
+
+static irqreturn_t em_sti_interrupt(int irq, void *dev_id)
+{
+ struct em_sti_priv *p = dev_id;
+
+ p->ced.event_handler(&p->ced);
+ return IRQ_HANDLED;
+}
+
+static int em_sti_start(struct em_sti_priv *p, unsigned int user)
+{
+ unsigned long flags;
+ int used_before;
+ int ret = 0;
+
+ raw_spin_lock_irqsave(&p->lock, flags);
+ used_before = p->active[USER_CLOCKSOURCE] | p->active[USER_CLOCKEVENT];
+ if (!used_before)
+ ret = em_sti_enable(p);
+
+ if (!ret)
+ p->active[user] = 1;
+ raw_spin_unlock_irqrestore(&p->lock, flags);
+
+ return ret;
+}
+
+static void em_sti_stop(struct em_sti_priv *p, unsigned int user)
+{
+ unsigned long flags;
+ int used_before, used_after;
+
+ raw_spin_lock_irqsave(&p->lock, flags);
+ used_before = p->active[USER_CLOCKSOURCE] | p->active[USER_CLOCKEVENT];
+ p->active[user] = 0;
+ used_after = p->active[USER_CLOCKSOURCE] | p->active[USER_CLOCKEVENT];
+
+ if (used_before && !used_after)
+ em_sti_disable(p);
+ raw_spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static struct em_sti_priv *cs_to_em_sti(struct clocksource *cs)
+{
+ return container_of(cs, struct em_sti_priv, cs);
+}
+
+static u64 em_sti_clocksource_read(struct clocksource *cs)
+{
+ return em_sti_count(cs_to_em_sti(cs));
+}
+
+static int em_sti_clocksource_enable(struct clocksource *cs)
+{
+ struct em_sti_priv *p = cs_to_em_sti(cs);
+
+ return em_sti_start(p, USER_CLOCKSOURCE);
+}
+
+static void em_sti_clocksource_disable(struct clocksource *cs)
+{
+ em_sti_stop(cs_to_em_sti(cs), USER_CLOCKSOURCE);
+}
+
+static void em_sti_clocksource_resume(struct clocksource *cs)
+{
+ em_sti_clocksource_enable(cs);
+}
+
+static int em_sti_register_clocksource(struct em_sti_priv *p)
+{
+ struct clocksource *cs = &p->cs;
+
+ cs->name = dev_name(&p->pdev->dev);
+ cs->rating = 200;
+ cs->read = em_sti_clocksource_read;
+ cs->enable = em_sti_clocksource_enable;
+ cs->disable = em_sti_clocksource_disable;
+ cs->suspend = em_sti_clocksource_disable;
+ cs->resume = em_sti_clocksource_resume;
+ cs->mask = CLOCKSOURCE_MASK(48);
+ cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ dev_info(&p->pdev->dev, "used as clock source\n");
+
+ clocksource_register_hz(cs, p->rate);
+ return 0;
+}
+
+static struct em_sti_priv *ced_to_em_sti(struct clock_event_device *ced)
+{
+ return container_of(ced, struct em_sti_priv, ced);
+}
+
+static int em_sti_clock_event_shutdown(struct clock_event_device *ced)
+{
+ struct em_sti_priv *p = ced_to_em_sti(ced);
+ em_sti_stop(p, USER_CLOCKEVENT);
+ return 0;
+}
+
+static int em_sti_clock_event_set_oneshot(struct clock_event_device *ced)
+{
+ struct em_sti_priv *p = ced_to_em_sti(ced);
+
+ dev_info(&p->pdev->dev, "used for oneshot clock events\n");
+ em_sti_start(p, USER_CLOCKEVENT);
+ return 0;
+}
+
+static int em_sti_clock_event_next(unsigned long delta,
+ struct clock_event_device *ced)
+{
+ struct em_sti_priv *p = ced_to_em_sti(ced);
+ u64 next;
+ int safe;
+
+ next = em_sti_set_next(p, em_sti_count(p) + delta);
+ safe = em_sti_count(p) < (next - 1);
+
+ return !safe;
+}
+
+static void em_sti_register_clockevent(struct em_sti_priv *p)
+{
+ struct clock_event_device *ced = &p->ced;
+
+ ced->name = dev_name(&p->pdev->dev);
+ ced->features = CLOCK_EVT_FEAT_ONESHOT;
+ ced->rating = 200;
+ ced->cpumask = cpu_possible_mask;
+ ced->set_next_event = em_sti_clock_event_next;
+ ced->set_state_shutdown = em_sti_clock_event_shutdown;
+ ced->set_state_oneshot = em_sti_clock_event_set_oneshot;
+
+ dev_info(&p->pdev->dev, "used for clock events\n");
+
+ clockevents_config_and_register(ced, p->rate, 2, 0xffffffff);
+}
+
+static int em_sti_probe(struct platform_device *pdev)
+{
+ struct em_sti_priv *p;
+ int irq, ret;
+
+ p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
+ if (p == NULL)
+ return -ENOMEM;
+
+ p->pdev = pdev;
+ platform_set_drvdata(pdev, p);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ /* map memory, let base point to the STI instance */
+ p->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(p->base))
+ return PTR_ERR(p->base);
+
+ ret = devm_request_irq(&pdev->dev, irq, em_sti_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
+ dev_name(&pdev->dev), p);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request low IRQ\n");
+ return ret;
+ }
+
+ /* get hold of clock */
+ p->clk = devm_clk_get(&pdev->dev, "sclk");
+ if (IS_ERR(p->clk)) {
+ dev_err(&pdev->dev, "cannot get clock\n");
+ return PTR_ERR(p->clk);
+ }
+
+ ret = clk_prepare(p->clk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot prepare clock\n");
+ return ret;
+ }
+
+ ret = clk_enable(p->clk);
+ if (ret < 0) {
+ dev_err(&p->pdev->dev, "cannot enable clock\n");
+ clk_unprepare(p->clk);
+ return ret;
+ }
+ p->rate = clk_get_rate(p->clk);
+ clk_disable(p->clk);
+
+ raw_spin_lock_init(&p->lock);
+ em_sti_register_clockevent(p);
+ em_sti_register_clocksource(p);
+ return 0;
+}
+
+static const struct of_device_id em_sti_dt_ids[] = {
+ { .compatible = "renesas,em-sti", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, em_sti_dt_ids);
+
+static struct platform_driver em_sti_device_driver = {
+ .probe = em_sti_probe,
+ .driver = {
+ .name = "em_sti",
+ .of_match_table = em_sti_dt_ids,
+ .suppress_bind_attrs = true,
+ }
+};
+
+static int __init em_sti_init(void)
+{
+ return platform_driver_register(&em_sti_device_driver);
+}
+
+static void __exit em_sti_exit(void)
+{
+ platform_driver_unregister(&em_sti_device_driver);
+}
+
+subsys_initcall(em_sti_init);
+module_exit(em_sti_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("Renesas Emma Mobile STI Timer Driver");
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
new file mode 100644
index 0000000000..ef8cb1b71b
--- /dev/null
+++ b/drivers/clocksource/exynos_mct.c
@@ -0,0 +1,701 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* linux/arch/arm/mach-exynos4/mct.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Exynos4 MCT(Multi-Core Timer) support
+*/
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/percpu.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/clocksource.h>
+#include <linux/sched_clock.h>
+
+#define EXYNOS4_MCTREG(x) (x)
+#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100)
+#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104)
+#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110)
+#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200)
+#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204)
+#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208)
+#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240)
+#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244)
+#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
+#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
+#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
+#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * (x)))
+#define EXYNOS4_MCT_L_MASK (0xffffff00)
+
+#define MCT_L_TCNTB_OFFSET (0x00)
+#define MCT_L_ICNTB_OFFSET (0x08)
+#define MCT_L_TCON_OFFSET (0x20)
+#define MCT_L_INT_CSTAT_OFFSET (0x30)
+#define MCT_L_INT_ENB_OFFSET (0x34)
+#define MCT_L_WSTAT_OFFSET (0x40)
+#define MCT_G_TCON_START (1 << 8)
+#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1)
+#define MCT_G_TCON_COMP0_ENABLE (1 << 0)
+#define MCT_L_TCON_INTERVAL_MODE (1 << 2)
+#define MCT_L_TCON_INT_START (1 << 1)
+#define MCT_L_TCON_TIMER_START (1 << 0)
+
+#define TICK_BASE_CNT 1
+
+#ifdef CONFIG_ARM
+/* Use values higher than ARM arch timer. See 6282edb72bed. */
+#define MCT_CLKSOURCE_RATING 450
+#define MCT_CLKEVENTS_RATING 500
+#else
+#define MCT_CLKSOURCE_RATING 350
+#define MCT_CLKEVENTS_RATING 350
+#endif
+
+/* There are four Global timers starting with 0 offset */
+#define MCT_G0_IRQ 0
+/* Local timers count starts after global timer count */
+#define MCT_L0_IRQ 4
+/* Max number of IRQ as per DT binding document */
+#define MCT_NR_IRQS 20
+/* Max number of local timers */
+#define MCT_NR_LOCAL (MCT_NR_IRQS - MCT_L0_IRQ)
+
+enum {
+ MCT_INT_SPI,
+ MCT_INT_PPI
+};
+
+static void __iomem *reg_base;
+static unsigned long clk_rate;
+static unsigned int mct_int_type;
+static int mct_irqs[MCT_NR_IRQS];
+
+struct mct_clock_event_device {
+ struct clock_event_device evt;
+ unsigned long base;
+ /**
+ * The length of the name must be adjusted if number of
+ * local timer interrupts grow over two digits
+ */
+ char name[11];
+};
+
+static void exynos4_mct_write(unsigned int value, unsigned long offset)
+{
+ unsigned long stat_addr;
+ u32 mask;
+ u32 i;
+
+ writel_relaxed(value, reg_base + offset);
+
+ if (likely(offset >= EXYNOS4_MCT_L_BASE(0))) {
+ stat_addr = (offset & EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET;
+ switch (offset & ~EXYNOS4_MCT_L_MASK) {
+ case MCT_L_TCON_OFFSET:
+ mask = 1 << 3; /* L_TCON write status */
+ break;
+ case MCT_L_ICNTB_OFFSET:
+ mask = 1 << 1; /* L_ICNTB write status */
+ break;
+ case MCT_L_TCNTB_OFFSET:
+ mask = 1 << 0; /* L_TCNTB write status */
+ break;
+ default:
+ return;
+ }
+ } else {
+ switch (offset) {
+ case EXYNOS4_MCT_G_TCON:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 16; /* G_TCON write status */
+ break;
+ case EXYNOS4_MCT_G_COMP0_L:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 0; /* G_COMP0_L write status */
+ break;
+ case EXYNOS4_MCT_G_COMP0_U:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 1; /* G_COMP0_U write status */
+ break;
+ case EXYNOS4_MCT_G_COMP0_ADD_INCR:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 2; /* G_COMP0_ADD_INCR w status */
+ break;
+ case EXYNOS4_MCT_G_CNT_L:
+ stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+ mask = 1 << 0; /* G_CNT_L write status */
+ break;
+ case EXYNOS4_MCT_G_CNT_U:
+ stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+ mask = 1 << 1; /* G_CNT_U write status */
+ break;
+ default:
+ return;
+ }
+ }
+
+ /* Wait maximum 1 ms until written values are applied */
+ for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++)
+ if (readl_relaxed(reg_base + stat_addr) & mask) {
+ writel_relaxed(mask, reg_base + stat_addr);
+ return;
+ }
+
+ panic("MCT hangs after writing %d (offset:0x%lx)\n", value, offset);
+}
+
+/* Clocksource handling */
+static void exynos4_mct_frc_start(void)
+{
+ u32 reg;
+
+ reg = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON);
+ reg |= MCT_G_TCON_START;
+ exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON);
+}
+
+/**
+ * exynos4_read_count_64 - Read all 64-bits of the global counter
+ *
+ * This will read all 64-bits of the global counter taking care to make sure
+ * that the upper and lower half match. Note that reading the MCT can be quite
+ * slow (hundreds of nanoseconds) so you should use the 32-bit (lower half
+ * only) version when possible.
+ *
+ * Returns the number of cycles in the global counter.
+ */
+static u64 exynos4_read_count_64(void)
+{
+ unsigned int lo, hi;
+ u32 hi2 = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_U);
+
+ do {
+ hi = hi2;
+ lo = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_L);
+ hi2 = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_U);
+ } while (hi != hi2);
+
+ return ((u64)hi << 32) | lo;
+}
+
+/**
+ * exynos4_read_count_32 - Read the lower 32-bits of the global counter
+ *
+ * This will read just the lower 32-bits of the global counter. This is marked
+ * as notrace so it can be used by the scheduler clock.
+ *
+ * Returns the number of cycles in the global counter (lower 32 bits).
+ */
+static u32 notrace exynos4_read_count_32(void)
+{
+ return readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_L);
+}
+
+static u64 exynos4_frc_read(struct clocksource *cs)
+{
+ return exynos4_read_count_32();
+}
+
+static void exynos4_frc_resume(struct clocksource *cs)
+{
+ exynos4_mct_frc_start();
+}
+
+static struct clocksource mct_frc = {
+ .name = "mct-frc",
+ .rating = MCT_CLKSOURCE_RATING,
+ .read = exynos4_frc_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .resume = exynos4_frc_resume,
+};
+
+static u64 notrace exynos4_read_sched_clock(void)
+{
+ return exynos4_read_count_32();
+}
+
+#if defined(CONFIG_ARM)
+static struct delay_timer exynos4_delay_timer;
+
+static cycles_t exynos4_read_current_timer(void)
+{
+ BUILD_BUG_ON_MSG(sizeof(cycles_t) != sizeof(u32),
+ "cycles_t needs to move to 32-bit for ARM64 usage");
+ return exynos4_read_count_32();
+}
+#endif
+
+static int __init exynos4_clocksource_init(bool frc_shared)
+{
+ /*
+ * When the frc is shared, the main processer should have already
+ * turned it on and we shouldn't be writing to TCON.
+ */
+ if (frc_shared)
+ mct_frc.resume = NULL;
+ else
+ exynos4_mct_frc_start();
+
+#if defined(CONFIG_ARM)
+ exynos4_delay_timer.read_current_timer = &exynos4_read_current_timer;
+ exynos4_delay_timer.freq = clk_rate;
+ register_current_timer_delay(&exynos4_delay_timer);
+#endif
+
+ if (clocksource_register_hz(&mct_frc, clk_rate))
+ panic("%s: can't register clocksource\n", mct_frc.name);
+
+ sched_clock_register(exynos4_read_sched_clock, 32, clk_rate);
+
+ return 0;
+}
+
+static void exynos4_mct_comp0_stop(void)
+{
+ unsigned int tcon;
+
+ tcon = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON);
+ tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC);
+
+ exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON);
+ exynos4_mct_write(0, EXYNOS4_MCT_G_INT_ENB);
+}
+
+static void exynos4_mct_comp0_start(bool periodic, unsigned long cycles)
+{
+ unsigned int tcon;
+ u64 comp_cycle;
+
+ tcon = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON);
+
+ if (periodic) {
+ tcon |= MCT_G_TCON_COMP0_AUTO_INC;
+ exynos4_mct_write(cycles, EXYNOS4_MCT_G_COMP0_ADD_INCR);
+ }
+
+ comp_cycle = exynos4_read_count_64() + cycles;
+ exynos4_mct_write((u32)comp_cycle, EXYNOS4_MCT_G_COMP0_L);
+ exynos4_mct_write((u32)(comp_cycle >> 32), EXYNOS4_MCT_G_COMP0_U);
+
+ exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_ENB);
+
+ tcon |= MCT_G_TCON_COMP0_ENABLE;
+ exynos4_mct_write(tcon , EXYNOS4_MCT_G_TCON);
+}
+
+static int exynos4_comp_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ exynos4_mct_comp0_start(false, cycles);
+
+ return 0;
+}
+
+static int mct_set_state_shutdown(struct clock_event_device *evt)
+{
+ exynos4_mct_comp0_stop();
+ return 0;
+}
+
+static int mct_set_state_periodic(struct clock_event_device *evt)
+{
+ unsigned long cycles_per_jiffy;
+
+ cycles_per_jiffy = (((unsigned long long)NSEC_PER_SEC / HZ * evt->mult)
+ >> evt->shift);
+ exynos4_mct_comp0_stop();
+ exynos4_mct_comp0_start(true, cycles_per_jiffy);
+ return 0;
+}
+
+static struct clock_event_device mct_comp_device = {
+ .name = "mct-comp",
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 250,
+ .set_next_event = exynos4_comp_set_next_event,
+ .set_state_periodic = mct_set_state_periodic,
+ .set_state_shutdown = mct_set_state_shutdown,
+ .set_state_oneshot = mct_set_state_shutdown,
+ .set_state_oneshot_stopped = mct_set_state_shutdown,
+ .tick_resume = mct_set_state_shutdown,
+};
+
+static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_CSTAT);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static int exynos4_clockevent_init(void)
+{
+ mct_comp_device.cpumask = cpumask_of(0);
+ clockevents_config_and_register(&mct_comp_device, clk_rate,
+ 0xf, 0xffffffff);
+ if (request_irq(mct_irqs[MCT_G0_IRQ], exynos4_mct_comp_isr,
+ IRQF_TIMER | IRQF_IRQPOLL, "mct_comp_irq",
+ &mct_comp_device))
+ pr_err("%s: request_irq() failed\n", "mct_comp_irq");
+
+ return 0;
+}
+
+static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
+
+/* Clock event handling */
+static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
+{
+ unsigned long tmp;
+ unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START;
+ unsigned long offset = mevt->base + MCT_L_TCON_OFFSET;
+
+ tmp = readl_relaxed(reg_base + offset);
+ if (tmp & mask) {
+ tmp &= ~mask;
+ exynos4_mct_write(tmp, offset);
+ }
+}
+
+static void exynos4_mct_tick_start(unsigned long cycles,
+ struct mct_clock_event_device *mevt)
+{
+ unsigned long tmp;
+
+ exynos4_mct_tick_stop(mevt);
+
+ tmp = (1 << 31) | cycles; /* MCT_L_UPDATE_ICNTB */
+
+ /* update interrupt count buffer */
+ exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET);
+
+ /* enable MCT tick interrupt */
+ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);
+
+ tmp = readl_relaxed(reg_base + mevt->base + MCT_L_TCON_OFFSET);
+ tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START |
+ MCT_L_TCON_INTERVAL_MODE;
+ exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET);
+}
+
+static void exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
+{
+ /* Clear the MCT tick interrupt */
+ if (readl_relaxed(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1)
+ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+}
+
+static int exynos4_tick_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ struct mct_clock_event_device *mevt;
+
+ mevt = container_of(evt, struct mct_clock_event_device, evt);
+ exynos4_mct_tick_start(cycles, mevt);
+ return 0;
+}
+
+static int set_state_shutdown(struct clock_event_device *evt)
+{
+ struct mct_clock_event_device *mevt;
+
+ mevt = container_of(evt, struct mct_clock_event_device, evt);
+ exynos4_mct_tick_stop(mevt);
+ exynos4_mct_tick_clear(mevt);
+ return 0;
+}
+
+static int set_state_periodic(struct clock_event_device *evt)
+{
+ struct mct_clock_event_device *mevt;
+ unsigned long cycles_per_jiffy;
+
+ mevt = container_of(evt, struct mct_clock_event_device, evt);
+ cycles_per_jiffy = (((unsigned long long)NSEC_PER_SEC / HZ * evt->mult)
+ >> evt->shift);
+ exynos4_mct_tick_stop(mevt);
+ exynos4_mct_tick_start(cycles_per_jiffy, mevt);
+ return 0;
+}
+
+static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+{
+ struct mct_clock_event_device *mevt = dev_id;
+ struct clock_event_device *evt = &mevt->evt;
+
+ /*
+ * This is for supporting oneshot mode.
+ * Mct would generate interrupt periodically
+ * without explicit stopping.
+ */
+ if (!clockevent_state_periodic(&mevt->evt))
+ exynos4_mct_tick_stop(mevt);
+
+ exynos4_mct_tick_clear(mevt);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static int exynos4_mct_starting_cpu(unsigned int cpu)
+{
+ struct mct_clock_event_device *mevt =
+ per_cpu_ptr(&percpu_mct_tick, cpu);
+ struct clock_event_device *evt = &mevt->evt;
+
+ snprintf(mevt->name, sizeof(mevt->name), "mct_tick%d", cpu);
+
+ evt->name = mevt->name;
+ evt->cpumask = cpumask_of(cpu);
+ evt->set_next_event = exynos4_tick_set_next_event;
+ evt->set_state_periodic = set_state_periodic;
+ evt->set_state_shutdown = set_state_shutdown;
+ evt->set_state_oneshot = set_state_shutdown;
+ evt->set_state_oneshot_stopped = set_state_shutdown;
+ evt->tick_resume = set_state_shutdown;
+ evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_PERCPU;
+ evt->rating = MCT_CLKEVENTS_RATING;
+
+ exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET);
+
+ if (mct_int_type == MCT_INT_SPI) {
+
+ if (evt->irq == -1)
+ return -EIO;
+
+ irq_force_affinity(evt->irq, cpumask_of(cpu));
+ enable_irq(evt->irq);
+ } else {
+ enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0);
+ }
+ clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1),
+ 0xf, 0x7fffffff);
+
+ return 0;
+}
+
+static int exynos4_mct_dying_cpu(unsigned int cpu)
+{
+ struct mct_clock_event_device *mevt =
+ per_cpu_ptr(&percpu_mct_tick, cpu);
+ struct clock_event_device *evt = &mevt->evt;
+
+ evt->set_state_shutdown(evt);
+ if (mct_int_type == MCT_INT_SPI) {
+ if (evt->irq != -1)
+ disable_irq_nosync(evt->irq);
+ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+ } else {
+ disable_percpu_irq(mct_irqs[MCT_L0_IRQ]);
+ }
+ return 0;
+}
+
+static int __init exynos4_timer_resources(struct device_node *np)
+{
+ struct clk *mct_clk, *tick_clk;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: unable to ioremap mct address space\n", __func__);
+
+ tick_clk = of_clk_get_by_name(np, "fin_pll");
+ if (IS_ERR(tick_clk))
+ panic("%s: unable to determine tick clock rate\n", __func__);
+ clk_rate = clk_get_rate(tick_clk);
+
+ mct_clk = of_clk_get_by_name(np, "mct");
+ if (IS_ERR(mct_clk))
+ panic("%s: unable to retrieve mct clock instance\n", __func__);
+ clk_prepare_enable(mct_clk);
+
+ return 0;
+}
+
+/**
+ * exynos4_timer_interrupts - initialize MCT interrupts
+ * @np: device node for MCT
+ * @int_type: interrupt type, MCT_INT_PPI or MCT_INT_SPI
+ * @local_idx: array mapping CPU numbers to local timer indices
+ * @nr_local: size of @local_idx array
+ */
+static int __init exynos4_timer_interrupts(struct device_node *np,
+ unsigned int int_type,
+ const u32 *local_idx,
+ size_t nr_local)
+{
+ int nr_irqs, i, err, cpu;
+
+ mct_int_type = int_type;
+
+ /* This driver uses only one global timer interrupt */
+ mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ);
+
+ /*
+ * Find out the number of local irqs specified. The local
+ * timer irqs are specified after the four global timer
+ * irqs are specified.
+ */
+ nr_irqs = of_irq_count(np);
+ if (nr_irqs > ARRAY_SIZE(mct_irqs)) {
+ pr_err("exynos-mct: too many (%d) interrupts configured in DT\n",
+ nr_irqs);
+ nr_irqs = ARRAY_SIZE(mct_irqs);
+ }
+ for (i = MCT_L0_IRQ; i < nr_irqs; i++)
+ mct_irqs[i] = irq_of_parse_and_map(np, i);
+
+ if (mct_int_type == MCT_INT_PPI) {
+
+ err = request_percpu_irq(mct_irqs[MCT_L0_IRQ],
+ exynos4_mct_tick_isr, "MCT",
+ &percpu_mct_tick);
+ WARN(err, "MCT: can't request IRQ %d (%d)\n",
+ mct_irqs[MCT_L0_IRQ], err);
+ } else {
+ for_each_possible_cpu(cpu) {
+ int mct_irq;
+ unsigned int irq_idx;
+ struct mct_clock_event_device *pcpu_mevt =
+ per_cpu_ptr(&percpu_mct_tick, cpu);
+
+ if (cpu >= nr_local) {
+ err = -EINVAL;
+ goto out_irq;
+ }
+
+ irq_idx = MCT_L0_IRQ + local_idx[cpu];
+
+ pcpu_mevt->evt.irq = -1;
+ if (irq_idx >= ARRAY_SIZE(mct_irqs))
+ break;
+ mct_irq = mct_irqs[irq_idx];
+
+ irq_set_status_flags(mct_irq, IRQ_NOAUTOEN);
+ if (request_irq(mct_irq,
+ exynos4_mct_tick_isr,
+ IRQF_TIMER | IRQF_NOBALANCING,
+ pcpu_mevt->name, pcpu_mevt)) {
+ pr_err("exynos-mct: cannot register IRQ (cpu%d)\n",
+ cpu);
+
+ continue;
+ }
+ pcpu_mevt->evt.irq = mct_irq;
+ }
+ }
+
+ for_each_possible_cpu(cpu) {
+ struct mct_clock_event_device *mevt = per_cpu_ptr(&percpu_mct_tick, cpu);
+
+ if (cpu >= nr_local) {
+ err = -EINVAL;
+ goto out_irq;
+ }
+
+ mevt->base = EXYNOS4_MCT_L_BASE(local_idx[cpu]);
+ }
+
+ /* Install hotplug callbacks which configure the timer on this CPU */
+ err = cpuhp_setup_state(CPUHP_AP_EXYNOS4_MCT_TIMER_STARTING,
+ "clockevents/exynos4/mct_timer:starting",
+ exynos4_mct_starting_cpu,
+ exynos4_mct_dying_cpu);
+ if (err)
+ goto out_irq;
+
+ return 0;
+
+out_irq:
+ if (mct_int_type == MCT_INT_PPI) {
+ free_percpu_irq(mct_irqs[MCT_L0_IRQ], &percpu_mct_tick);
+ } else {
+ for_each_possible_cpu(cpu) {
+ struct mct_clock_event_device *pcpu_mevt =
+ per_cpu_ptr(&percpu_mct_tick, cpu);
+
+ if (pcpu_mevt->evt.irq != -1) {
+ free_irq(pcpu_mevt->evt.irq, pcpu_mevt);
+ pcpu_mevt->evt.irq = -1;
+ }
+ }
+ }
+ return err;
+}
+
+static int __init mct_init_dt(struct device_node *np, unsigned int int_type)
+{
+ bool frc_shared = of_property_read_bool(np, "samsung,frc-shared");
+ u32 local_idx[MCT_NR_LOCAL] = {0};
+ int nr_local;
+ int ret;
+
+ nr_local = of_property_count_u32_elems(np, "samsung,local-timers");
+ if (nr_local == 0)
+ return -EINVAL;
+ if (nr_local > 0) {
+ if (nr_local > ARRAY_SIZE(local_idx))
+ return -EINVAL;
+
+ ret = of_property_read_u32_array(np, "samsung,local-timers",
+ local_idx, nr_local);
+ if (ret)
+ return ret;
+ } else {
+ int i;
+
+ nr_local = ARRAY_SIZE(local_idx);
+ for (i = 0; i < nr_local; i++)
+ local_idx[i] = i;
+ }
+
+ ret = exynos4_timer_resources(np);
+ if (ret)
+ return ret;
+
+ ret = exynos4_timer_interrupts(np, int_type, local_idx, nr_local);
+ if (ret)
+ return ret;
+
+ ret = exynos4_clocksource_init(frc_shared);
+ if (ret)
+ return ret;
+
+ /*
+ * When the FRC is shared with a main processor, this secondary
+ * processor cannot use the global comparator.
+ */
+ if (frc_shared)
+ return 0;
+
+ return exynos4_clockevent_init();
+}
+
+
+static int __init mct_init_spi(struct device_node *np)
+{
+ return mct_init_dt(np, MCT_INT_SPI);
+}
+
+static int __init mct_init_ppi(struct device_node *np)
+{
+ return mct_init_dt(np, MCT_INT_PPI);
+}
+TIMER_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init_spi);
+TIMER_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init_ppi);
diff --git a/drivers/clocksource/hyperv_timer.c b/drivers/clocksource/hyperv_timer.c
new file mode 100644
index 0000000000..8ff7cd4e20
--- /dev/null
+++ b/drivers/clocksource/hyperv_timer.c
@@ -0,0 +1,614 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Clocksource driver for the synthetic counter and timers
+ * provided by the Hyper-V hypervisor to guest VMs, as described
+ * in the Hyper-V Top Level Functional Spec (TLFS). This driver
+ * is instruction set architecture independent.
+ *
+ * Copyright (C) 2019, Microsoft, Inc.
+ *
+ * Author: Michael Kelley <mikelley@microsoft.com>
+ */
+
+#include <linux/percpu.h>
+#include <linux/cpumask.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/sched_clock.h>
+#include <linux/mm.h>
+#include <linux/cpuhotplug.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/acpi.h>
+#include <linux/hyperv.h>
+#include <clocksource/hyperv_timer.h>
+#include <asm/hyperv-tlfs.h>
+#include <asm/mshyperv.h>
+
+static struct clock_event_device __percpu *hv_clock_event;
+static u64 hv_sched_clock_offset __ro_after_init;
+
+/*
+ * If false, we're using the old mechanism for stimer0 interrupts
+ * where it sends a VMbus message when it expires. The old
+ * mechanism is used when running on older versions of Hyper-V
+ * that don't support Direct Mode. While Hyper-V provides
+ * four stimer's per CPU, Linux uses only stimer0.
+ *
+ * Because Direct Mode does not require processing a VMbus
+ * message, stimer interrupts can be enabled earlier in the
+ * process of booting a CPU, and consistent with when timer
+ * interrupts are enabled for other clocksource drivers.
+ * However, for legacy versions of Hyper-V when Direct Mode
+ * is not enabled, setting up stimer interrupts must be
+ * delayed until VMbus is initialized and can process the
+ * interrupt message.
+ */
+static bool direct_mode_enabled;
+
+static int stimer0_irq = -1;
+static int stimer0_message_sint;
+static __maybe_unused DEFINE_PER_CPU(long, stimer0_evt);
+
+/*
+ * Common code for stimer0 interrupts coming via Direct Mode or
+ * as a VMbus message.
+ */
+void hv_stimer0_isr(void)
+{
+ struct clock_event_device *ce;
+
+ ce = this_cpu_ptr(hv_clock_event);
+ ce->event_handler(ce);
+}
+EXPORT_SYMBOL_GPL(hv_stimer0_isr);
+
+/*
+ * stimer0 interrupt handler for architectures that support
+ * per-cpu interrupts, which also implies Direct Mode.
+ */
+static irqreturn_t __maybe_unused hv_stimer0_percpu_isr(int irq, void *dev_id)
+{
+ hv_stimer0_isr();
+ return IRQ_HANDLED;
+}
+
+static int hv_ce_set_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ u64 current_tick;
+
+ current_tick = hv_read_reference_counter();
+ current_tick += delta;
+ hv_set_register(HV_REGISTER_STIMER0_COUNT, current_tick);
+ return 0;
+}
+
+static int hv_ce_shutdown(struct clock_event_device *evt)
+{
+ hv_set_register(HV_REGISTER_STIMER0_COUNT, 0);
+ hv_set_register(HV_REGISTER_STIMER0_CONFIG, 0);
+ if (direct_mode_enabled && stimer0_irq >= 0)
+ disable_percpu_irq(stimer0_irq);
+
+ return 0;
+}
+
+static int hv_ce_set_oneshot(struct clock_event_device *evt)
+{
+ union hv_stimer_config timer_cfg;
+
+ timer_cfg.as_uint64 = 0;
+ timer_cfg.enable = 1;
+ timer_cfg.auto_enable = 1;
+ if (direct_mode_enabled) {
+ /*
+ * When it expires, the timer will directly interrupt
+ * on the specified hardware vector/IRQ.
+ */
+ timer_cfg.direct_mode = 1;
+ timer_cfg.apic_vector = HYPERV_STIMER0_VECTOR;
+ if (stimer0_irq >= 0)
+ enable_percpu_irq(stimer0_irq, IRQ_TYPE_NONE);
+ } else {
+ /*
+ * When it expires, the timer will generate a VMbus message,
+ * to be handled by the normal VMbus interrupt handler.
+ */
+ timer_cfg.direct_mode = 0;
+ timer_cfg.sintx = stimer0_message_sint;
+ }
+ hv_set_register(HV_REGISTER_STIMER0_CONFIG, timer_cfg.as_uint64);
+ return 0;
+}
+
+/*
+ * hv_stimer_init - Per-cpu initialization of the clockevent
+ */
+static int hv_stimer_init(unsigned int cpu)
+{
+ struct clock_event_device *ce;
+
+ if (!hv_clock_event)
+ return 0;
+
+ ce = per_cpu_ptr(hv_clock_event, cpu);
+ ce->name = "Hyper-V clockevent";
+ ce->features = CLOCK_EVT_FEAT_ONESHOT;
+ ce->cpumask = cpumask_of(cpu);
+ ce->rating = 1000;
+ ce->set_state_shutdown = hv_ce_shutdown;
+ ce->set_state_oneshot = hv_ce_set_oneshot;
+ ce->set_next_event = hv_ce_set_next_event;
+
+ clockevents_config_and_register(ce,
+ HV_CLOCK_HZ,
+ HV_MIN_DELTA_TICKS,
+ HV_MAX_MAX_DELTA_TICKS);
+ return 0;
+}
+
+/*
+ * hv_stimer_cleanup - Per-cpu cleanup of the clockevent
+ */
+int hv_stimer_cleanup(unsigned int cpu)
+{
+ struct clock_event_device *ce;
+
+ if (!hv_clock_event)
+ return 0;
+
+ /*
+ * In the legacy case where Direct Mode is not enabled
+ * (which can only be on x86/64), stimer cleanup happens
+ * relatively early in the CPU offlining process. We
+ * must unbind the stimer-based clockevent device so
+ * that the LAPIC timer can take over until clockevents
+ * are no longer needed in the offlining process. Note
+ * that clockevents_unbind_device() eventually calls
+ * hv_ce_shutdown().
+ *
+ * The unbind should not be done when Direct Mode is
+ * enabled because we may be on an architecture where
+ * there are no other clockevent devices to fallback to.
+ */
+ ce = per_cpu_ptr(hv_clock_event, cpu);
+ if (direct_mode_enabled)
+ hv_ce_shutdown(ce);
+ else
+ clockevents_unbind_device(ce, cpu);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(hv_stimer_cleanup);
+
+/*
+ * These placeholders are overridden by arch specific code on
+ * architectures that need special setup of the stimer0 IRQ because
+ * they don't support per-cpu IRQs (such as x86/x64).
+ */
+void __weak hv_setup_stimer0_handler(void (*handler)(void))
+{
+};
+
+void __weak hv_remove_stimer0_handler(void)
+{
+};
+
+#ifdef CONFIG_ACPI
+/* Called only on architectures with per-cpu IRQs (i.e., not x86/x64) */
+static int hv_setup_stimer0_irq(void)
+{
+ int ret;
+
+ ret = acpi_register_gsi(NULL, HYPERV_STIMER0_VECTOR,
+ ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_HIGH);
+ if (ret < 0) {
+ pr_err("Can't register Hyper-V stimer0 GSI. Error %d", ret);
+ return ret;
+ }
+ stimer0_irq = ret;
+
+ ret = request_percpu_irq(stimer0_irq, hv_stimer0_percpu_isr,
+ "Hyper-V stimer0", &stimer0_evt);
+ if (ret) {
+ pr_err("Can't request Hyper-V stimer0 IRQ %d. Error %d",
+ stimer0_irq, ret);
+ acpi_unregister_gsi(stimer0_irq);
+ stimer0_irq = -1;
+ }
+ return ret;
+}
+
+static void hv_remove_stimer0_irq(void)
+{
+ if (stimer0_irq == -1) {
+ hv_remove_stimer0_handler();
+ } else {
+ free_percpu_irq(stimer0_irq, &stimer0_evt);
+ acpi_unregister_gsi(stimer0_irq);
+ stimer0_irq = -1;
+ }
+}
+#else
+static int hv_setup_stimer0_irq(void)
+{
+ return 0;
+}
+
+static void hv_remove_stimer0_irq(void)
+{
+}
+#endif
+
+/* hv_stimer_alloc - Global initialization of the clockevent and stimer0 */
+int hv_stimer_alloc(bool have_percpu_irqs)
+{
+ int ret;
+
+ /*
+ * Synthetic timers are always available except on old versions of
+ * Hyper-V on x86. In that case, return as error as Linux will use a
+ * clockevent based on emulated LAPIC timer hardware.
+ */
+ if (!(ms_hyperv.features & HV_MSR_SYNTIMER_AVAILABLE))
+ return -EINVAL;
+
+ hv_clock_event = alloc_percpu(struct clock_event_device);
+ if (!hv_clock_event)
+ return -ENOMEM;
+
+ direct_mode_enabled = ms_hyperv.misc_features &
+ HV_STIMER_DIRECT_MODE_AVAILABLE;
+
+ /*
+ * If Direct Mode isn't enabled, the remainder of the initialization
+ * is done later by hv_stimer_legacy_init()
+ */
+ if (!direct_mode_enabled)
+ return 0;
+
+ if (have_percpu_irqs) {
+ ret = hv_setup_stimer0_irq();
+ if (ret)
+ goto free_clock_event;
+ } else {
+ hv_setup_stimer0_handler(hv_stimer0_isr);
+ }
+
+ /*
+ * Since we are in Direct Mode, stimer initialization
+ * can be done now with a CPUHP value in the same range
+ * as other clockevent devices.
+ */
+ ret = cpuhp_setup_state(CPUHP_AP_HYPERV_TIMER_STARTING,
+ "clockevents/hyperv/stimer:starting",
+ hv_stimer_init, hv_stimer_cleanup);
+ if (ret < 0) {
+ hv_remove_stimer0_irq();
+ goto free_clock_event;
+ }
+ return ret;
+
+free_clock_event:
+ free_percpu(hv_clock_event);
+ hv_clock_event = NULL;
+ return ret;
+}
+EXPORT_SYMBOL_GPL(hv_stimer_alloc);
+
+/*
+ * hv_stimer_legacy_init -- Called from the VMbus driver to handle
+ * the case when Direct Mode is not enabled, and the stimer
+ * must be initialized late in the CPU onlining process.
+ *
+ */
+void hv_stimer_legacy_init(unsigned int cpu, int sint)
+{
+ if (direct_mode_enabled)
+ return;
+
+ /*
+ * This function gets called by each vCPU, so setting the
+ * global stimer_message_sint value each time is conceptually
+ * not ideal, but the value passed in is always the same and
+ * it avoids introducing yet another interface into this
+ * clocksource driver just to set the sint in the legacy case.
+ */
+ stimer0_message_sint = sint;
+ (void)hv_stimer_init(cpu);
+}
+EXPORT_SYMBOL_GPL(hv_stimer_legacy_init);
+
+/*
+ * hv_stimer_legacy_cleanup -- Called from the VMbus driver to
+ * handle the case when Direct Mode is not enabled, and the
+ * stimer must be cleaned up early in the CPU offlining
+ * process.
+ */
+void hv_stimer_legacy_cleanup(unsigned int cpu)
+{
+ if (direct_mode_enabled)
+ return;
+ (void)hv_stimer_cleanup(cpu);
+}
+EXPORT_SYMBOL_GPL(hv_stimer_legacy_cleanup);
+
+/*
+ * Do a global cleanup of clockevents for the cases of kexec and
+ * vmbus exit
+ */
+void hv_stimer_global_cleanup(void)
+{
+ int cpu;
+
+ /*
+ * hv_stime_legacy_cleanup() will stop the stimer if Direct
+ * Mode is not enabled, and fallback to the LAPIC timer.
+ */
+ for_each_present_cpu(cpu) {
+ hv_stimer_legacy_cleanup(cpu);
+ }
+
+ if (!hv_clock_event)
+ return;
+
+ if (direct_mode_enabled) {
+ cpuhp_remove_state(CPUHP_AP_HYPERV_TIMER_STARTING);
+ hv_remove_stimer0_irq();
+ stimer0_irq = -1;
+ }
+ free_percpu(hv_clock_event);
+ hv_clock_event = NULL;
+
+}
+EXPORT_SYMBOL_GPL(hv_stimer_global_cleanup);
+
+static __always_inline u64 read_hv_clock_msr(void)
+{
+ /*
+ * Read the partition counter to get the current tick count. This count
+ * is set to 0 when the partition is created and is incremented in 100
+ * nanosecond units.
+ *
+ * Use hv_raw_get_register() because this function is used from
+ * noinstr. Notable; while HV_REGISTER_TIME_REF_COUNT is a synthetic
+ * register it doesn't need the GHCB path.
+ */
+ return hv_raw_get_register(HV_REGISTER_TIME_REF_COUNT);
+}
+
+/*
+ * Code and definitions for the Hyper-V clocksources. Two
+ * clocksources are defined: one that reads the Hyper-V defined MSR, and
+ * the other that uses the TSC reference page feature as defined in the
+ * TLFS. The MSR version is for compatibility with old versions of
+ * Hyper-V and 32-bit x86. The TSC reference page version is preferred.
+ */
+
+static union {
+ struct ms_hyperv_tsc_page page;
+ u8 reserved[PAGE_SIZE];
+} tsc_pg __bss_decrypted __aligned(PAGE_SIZE);
+
+static struct ms_hyperv_tsc_page *tsc_page = &tsc_pg.page;
+static unsigned long tsc_pfn;
+
+unsigned long hv_get_tsc_pfn(void)
+{
+ return tsc_pfn;
+}
+EXPORT_SYMBOL_GPL(hv_get_tsc_pfn);
+
+struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
+{
+ return tsc_page;
+}
+EXPORT_SYMBOL_GPL(hv_get_tsc_page);
+
+static __always_inline u64 read_hv_clock_tsc(void)
+{
+ u64 cur_tsc, time;
+
+ /*
+ * The Hyper-V Top-Level Function Spec (TLFS), section Timers,
+ * subsection Refererence Counter, guarantees that the TSC and MSR
+ * times are in sync and monotonic. Therefore we can fall back
+ * to the MSR in case the TSC page indicates unavailability.
+ */
+ if (!hv_read_tsc_page_tsc(tsc_page, &cur_tsc, &time))
+ time = read_hv_clock_msr();
+
+ return time;
+}
+
+static u64 notrace read_hv_clock_tsc_cs(struct clocksource *arg)
+{
+ return read_hv_clock_tsc();
+}
+
+static u64 noinstr read_hv_sched_clock_tsc(void)
+{
+ return (read_hv_clock_tsc() - hv_sched_clock_offset) *
+ (NSEC_PER_SEC / HV_CLOCK_HZ);
+}
+
+static void suspend_hv_clock_tsc(struct clocksource *arg)
+{
+ union hv_reference_tsc_msr tsc_msr;
+
+ /* Disable the TSC page */
+ tsc_msr.as_uint64 = hv_get_register(HV_REGISTER_REFERENCE_TSC);
+ tsc_msr.enable = 0;
+ hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr.as_uint64);
+}
+
+
+static void resume_hv_clock_tsc(struct clocksource *arg)
+{
+ union hv_reference_tsc_msr tsc_msr;
+
+ /* Re-enable the TSC page */
+ tsc_msr.as_uint64 = hv_get_register(HV_REGISTER_REFERENCE_TSC);
+ tsc_msr.enable = 1;
+ tsc_msr.pfn = tsc_pfn;
+ hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr.as_uint64);
+}
+
+#ifdef HAVE_VDSO_CLOCKMODE_HVCLOCK
+static int hv_cs_enable(struct clocksource *cs)
+{
+ vclocks_set_used(VDSO_CLOCKMODE_HVCLOCK);
+ return 0;
+}
+#endif
+
+static struct clocksource hyperv_cs_tsc = {
+ .name = "hyperv_clocksource_tsc_page",
+ .rating = 500,
+ .read = read_hv_clock_tsc_cs,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .suspend= suspend_hv_clock_tsc,
+ .resume = resume_hv_clock_tsc,
+#ifdef HAVE_VDSO_CLOCKMODE_HVCLOCK
+ .enable = hv_cs_enable,
+ .vdso_clock_mode = VDSO_CLOCKMODE_HVCLOCK,
+#else
+ .vdso_clock_mode = VDSO_CLOCKMODE_NONE,
+#endif
+};
+
+static u64 notrace read_hv_clock_msr_cs(struct clocksource *arg)
+{
+ return read_hv_clock_msr();
+}
+
+static struct clocksource hyperv_cs_msr = {
+ .name = "hyperv_clocksource_msr",
+ .rating = 495,
+ .read = read_hv_clock_msr_cs,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+ * Reference to pv_ops must be inline so objtool
+ * detection of noinstr violations can work correctly.
+ */
+#ifdef CONFIG_GENERIC_SCHED_CLOCK
+static __always_inline void hv_setup_sched_clock(void *sched_clock)
+{
+ /*
+ * We're on an architecture with generic sched clock (not x86/x64).
+ * The Hyper-V sched clock read function returns nanoseconds, not
+ * the normal 100ns units of the Hyper-V synthetic clock.
+ */
+ sched_clock_register(sched_clock, 64, NSEC_PER_SEC);
+}
+#elif defined CONFIG_PARAVIRT
+static __always_inline void hv_setup_sched_clock(void *sched_clock)
+{
+ /* We're on x86/x64 *and* using PV ops */
+ paravirt_set_sched_clock(sched_clock);
+}
+#else /* !CONFIG_GENERIC_SCHED_CLOCK && !CONFIG_PARAVIRT */
+static __always_inline void hv_setup_sched_clock(void *sched_clock) {}
+#endif /* CONFIG_GENERIC_SCHED_CLOCK */
+
+static void __init hv_init_tsc_clocksource(void)
+{
+ union hv_reference_tsc_msr tsc_msr;
+
+ /*
+ * If Hyper-V offers TSC_INVARIANT, then the virtualized TSC correctly
+ * handles frequency and offset changes due to live migration,
+ * pause/resume, and other VM management operations. So lower the
+ * Hyper-V Reference TSC rating, causing the generic TSC to be used.
+ * TSC_INVARIANT is not offered on ARM64, so the Hyper-V Reference
+ * TSC will be preferred over the virtualized ARM64 arch counter.
+ */
+ if (ms_hyperv.features & HV_ACCESS_TSC_INVARIANT) {
+ hyperv_cs_tsc.rating = 250;
+ hyperv_cs_msr.rating = 245;
+ }
+
+ if (!(ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE))
+ return;
+
+ hv_read_reference_counter = read_hv_clock_tsc;
+
+ /*
+ * TSC page mapping works differently in root compared to guest.
+ * - In guest partition the guest PFN has to be passed to the
+ * hypervisor.
+ * - In root partition it's other way around: it has to map the PFN
+ * provided by the hypervisor.
+ * But it can't be mapped right here as it's too early and MMU isn't
+ * ready yet. So, we only set the enable bit here and will remap the
+ * page later in hv_remap_tsc_clocksource().
+ *
+ * It worth mentioning, that TSC clocksource read function
+ * (read_hv_clock_tsc) has a MSR-based fallback mechanism, used when
+ * TSC page is zeroed (which is the case until the PFN is remapped) and
+ * thus TSC clocksource will work even without the real TSC page
+ * mapped.
+ */
+ tsc_msr.as_uint64 = hv_get_register(HV_REGISTER_REFERENCE_TSC);
+ if (hv_root_partition)
+ tsc_pfn = tsc_msr.pfn;
+ else
+ tsc_pfn = HVPFN_DOWN(virt_to_phys(tsc_page));
+ tsc_msr.enable = 1;
+ tsc_msr.pfn = tsc_pfn;
+ hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr.as_uint64);
+
+ clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100);
+
+ /*
+ * If TSC is invariant, then let it stay as the sched clock since it
+ * will be faster than reading the TSC page. But if not invariant, use
+ * the TSC page so that live migrations across hosts with different
+ * frequencies is handled correctly.
+ */
+ if (!(ms_hyperv.features & HV_ACCESS_TSC_INVARIANT)) {
+ hv_sched_clock_offset = hv_read_reference_counter();
+ hv_setup_sched_clock(read_hv_sched_clock_tsc);
+ }
+}
+
+void __init hv_init_clocksource(void)
+{
+ /*
+ * Try to set up the TSC page clocksource, then the MSR clocksource.
+ * At least one of these will always be available except on very old
+ * versions of Hyper-V on x86. In that case we won't have a Hyper-V
+ * clocksource, but Linux will still run with a clocksource based
+ * on the emulated PIT or LAPIC timer.
+ *
+ * Never use the MSR clocksource as sched clock. It's too slow.
+ * Better to use the native sched clock as the fallback.
+ */
+ hv_init_tsc_clocksource();
+
+ if (ms_hyperv.features & HV_MSR_TIME_REF_COUNT_AVAILABLE)
+ clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100);
+}
+
+void __init hv_remap_tsc_clocksource(void)
+{
+ if (!(ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE))
+ return;
+
+ if (!hv_root_partition) {
+ WARN(1, "%s: attempt to remap TSC page in guest partition\n",
+ __func__);
+ return;
+ }
+
+ tsc_page = memremap(tsc_pfn << HV_HYP_PAGE_SHIFT, sizeof(tsc_pg),
+ MEMREMAP_WB);
+ if (!tsc_page)
+ pr_err("Failed to remap Hyper-V TSC page.\n");
+}
diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
new file mode 100644
index 0000000000..d4350bb10b
--- /dev/null
+++ b/drivers/clocksource/i8253.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * i8253 PIT clocksource
+ */
+#include <linux/clockchips.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/timex.h>
+#include <linux/module.h>
+#include <linux/i8253.h>
+#include <linux/smp.h>
+
+/*
+ * Protects access to I/O ports
+ *
+ * 0040-0043 : timer0, i8253 / i8254
+ * 0061-0061 : NMI Control Register which contains two speaker control bits.
+ */
+DEFINE_RAW_SPINLOCK(i8253_lock);
+EXPORT_SYMBOL(i8253_lock);
+
+/*
+ * Handle PIT quirk in pit_shutdown() where zeroing the counter register
+ * restarts the PIT, negating the shutdown. On platforms with the quirk,
+ * platform specific code can set this to false.
+ */
+bool i8253_clear_counter_on_shutdown __ro_after_init = true;
+
+#ifdef CONFIG_CLKSRC_I8253
+/*
+ * Since the PIT overflows every tick, its not very useful
+ * to just read by itself. So use jiffies to emulate a free
+ * running counter:
+ */
+static u64 i8253_read(struct clocksource *cs)
+{
+ static int old_count;
+ static u32 old_jifs;
+ unsigned long flags;
+ int count;
+ u32 jifs;
+
+ raw_spin_lock_irqsave(&i8253_lock, flags);
+ /*
+ * Although our caller may have the read side of jiffies_lock,
+ * this is now a seqlock, and we are cheating in this routine
+ * by having side effects on state that we cannot undo if
+ * there is a collision on the seqlock and our caller has to
+ * retry. (Namely, old_jifs and old_count.) So we must treat
+ * jiffies as volatile despite the lock. We read jiffies
+ * before latching the timer count to guarantee that although
+ * the jiffies value might be older than the count (that is,
+ * the counter may underflow between the last point where
+ * jiffies was incremented and the point where we latch the
+ * count), it cannot be newer.
+ */
+ jifs = jiffies;
+ outb_p(0x00, PIT_MODE); /* latch the count ASAP */
+ count = inb_p(PIT_CH0); /* read the latched count */
+ count |= inb_p(PIT_CH0) << 8;
+
+ /* VIA686a test code... reset the latch if count > max + 1 */
+ if (count > PIT_LATCH) {
+ outb_p(0x34, PIT_MODE);
+ outb_p(PIT_LATCH & 0xff, PIT_CH0);
+ outb_p(PIT_LATCH >> 8, PIT_CH0);
+ count = PIT_LATCH - 1;
+ }
+
+ /*
+ * It's possible for count to appear to go the wrong way for a
+ * couple of reasons:
+ *
+ * 1. The timer counter underflows, but we haven't handled the
+ * resulting interrupt and incremented jiffies yet.
+ * 2. Hardware problem with the timer, not giving us continuous time,
+ * the counter does small "jumps" upwards on some Pentium systems,
+ * (see c't 95/10 page 335 for Neptun bug.)
+ *
+ * Previous attempts to handle these cases intelligently were
+ * buggy, so we just do the simple thing now.
+ */
+ if (count > old_count && jifs == old_jifs)
+ count = old_count;
+
+ old_count = count;
+ old_jifs = jifs;
+
+ raw_spin_unlock_irqrestore(&i8253_lock, flags);
+
+ count = (PIT_LATCH - 1) - count;
+
+ return (u64)(jifs * PIT_LATCH) + count;
+}
+
+static struct clocksource i8253_cs = {
+ .name = "pit",
+ .rating = 110,
+ .read = i8253_read,
+ .mask = CLOCKSOURCE_MASK(32),
+};
+
+int __init clocksource_i8253_init(void)
+{
+ return clocksource_register_hz(&i8253_cs, PIT_TICK_RATE);
+}
+#endif
+
+#ifdef CONFIG_CLKEVT_I8253
+static int pit_shutdown(struct clock_event_device *evt)
+{
+ if (!clockevent_state_oneshot(evt) && !clockevent_state_periodic(evt))
+ return 0;
+
+ raw_spin_lock(&i8253_lock);
+
+ outb_p(0x30, PIT_MODE);
+
+ if (i8253_clear_counter_on_shutdown) {
+ outb_p(0, PIT_CH0);
+ outb_p(0, PIT_CH0);
+ }
+
+ raw_spin_unlock(&i8253_lock);
+ return 0;
+}
+
+static int pit_set_oneshot(struct clock_event_device *evt)
+{
+ raw_spin_lock(&i8253_lock);
+ outb_p(0x38, PIT_MODE);
+ raw_spin_unlock(&i8253_lock);
+ return 0;
+}
+
+static int pit_set_periodic(struct clock_event_device *evt)
+{
+ raw_spin_lock(&i8253_lock);
+
+ /* binary, mode 2, LSB/MSB, ch 0 */
+ outb_p(0x34, PIT_MODE);
+ outb_p(PIT_LATCH & 0xff, PIT_CH0); /* LSB */
+ outb_p(PIT_LATCH >> 8, PIT_CH0); /* MSB */
+
+ raw_spin_unlock(&i8253_lock);
+ return 0;
+}
+
+/*
+ * Program the next event in oneshot mode
+ *
+ * Delta is given in PIT ticks
+ */
+static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
+{
+ raw_spin_lock(&i8253_lock);
+ outb_p(delta & 0xff , PIT_CH0); /* LSB */
+ outb_p(delta >> 8 , PIT_CH0); /* MSB */
+ raw_spin_unlock(&i8253_lock);
+
+ return 0;
+}
+
+/*
+ * On UP the PIT can serve all of the possible timer functions. On SMP systems
+ * it can be solely used for the global tick.
+ */
+struct clock_event_device i8253_clockevent = {
+ .name = "pit",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+ .set_state_shutdown = pit_shutdown,
+ .set_state_periodic = pit_set_periodic,
+ .set_next_event = pit_next_event,
+};
+
+/*
+ * Initialize the conversion factor and the min/max deltas of the clock event
+ * structure and register the clock event source with the framework.
+ */
+void __init clockevent_i8253_init(bool oneshot)
+{
+ if (oneshot) {
+ i8253_clockevent.features |= CLOCK_EVT_FEAT_ONESHOT;
+ i8253_clockevent.set_state_oneshot = pit_set_oneshot;
+ }
+ /*
+ * Start pit with the boot cpu mask. x86 might make it global
+ * when it is used as broadcast device later.
+ */
+ i8253_clockevent.cpumask = cpumask_of(smp_processor_id());
+
+ clockevents_config_and_register(&i8253_clockevent, PIT_TICK_RATE,
+ 0xF, 0x7FFF);
+}
+#endif
diff --git a/drivers/clocksource/ingenic-ost.c b/drivers/clocksource/ingenic-ost.c
new file mode 100644
index 0000000000..9f7c280a13
--- /dev/null
+++ b/drivers/clocksource/ingenic-ost.c
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx SoCs TCU Operating System Timer driver
+ *
+ * Copyright (C) 2016 Maarten ter Huurne <maarten@treewalker.org>
+ * Copyright (C) 2020 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/mfd/ingenic-tcu.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/sched_clock.h>
+
+#define TCU_OST_TCSR_MASK 0xffc0
+#define TCU_OST_TCSR_CNT_MD BIT(15)
+
+#define TCU_OST_CHANNEL 15
+
+/*
+ * The TCU_REG_OST_CNT{L,R} from <linux/mfd/ingenic-tcu.h> are only for the
+ * regmap; these are for use with the __iomem pointer.
+ */
+#define OST_REG_CNTL 0x4
+#define OST_REG_CNTH 0x8
+
+struct ingenic_ost_soc_info {
+ bool is64bit;
+};
+
+struct ingenic_ost {
+ void __iomem *regs;
+ struct clk *clk;
+
+ struct clocksource cs;
+};
+
+static struct ingenic_ost *ingenic_ost;
+
+static u64 notrace ingenic_ost_read_cntl(void)
+{
+ /* Read using __iomem pointer instead of regmap to avoid locking */
+ return readl(ingenic_ost->regs + OST_REG_CNTL);
+}
+
+static u64 notrace ingenic_ost_read_cnth(void)
+{
+ /* Read using __iomem pointer instead of regmap to avoid locking */
+ return readl(ingenic_ost->regs + OST_REG_CNTH);
+}
+
+static u64 notrace ingenic_ost_clocksource_readl(struct clocksource *cs)
+{
+ return ingenic_ost_read_cntl();
+}
+
+static u64 notrace ingenic_ost_clocksource_readh(struct clocksource *cs)
+{
+ return ingenic_ost_read_cnth();
+}
+
+static int __init ingenic_ost_probe(struct platform_device *pdev)
+{
+ const struct ingenic_ost_soc_info *soc_info;
+ struct device *dev = &pdev->dev;
+ struct ingenic_ost *ost;
+ struct clocksource *cs;
+ struct regmap *map;
+ unsigned long rate;
+ int err;
+
+ soc_info = device_get_match_data(dev);
+ if (!soc_info)
+ return -EINVAL;
+
+ ost = devm_kzalloc(dev, sizeof(*ost), GFP_KERNEL);
+ if (!ost)
+ return -ENOMEM;
+
+ ingenic_ost = ost;
+
+ ost->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(ost->regs))
+ return PTR_ERR(ost->regs);
+
+ map = device_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(map)) {
+ dev_err(dev, "regmap not found");
+ return PTR_ERR(map);
+ }
+
+ ost->clk = devm_clk_get(dev, "ost");
+ if (IS_ERR(ost->clk))
+ return PTR_ERR(ost->clk);
+
+ err = clk_prepare_enable(ost->clk);
+ if (err)
+ return err;
+
+ /* Clear counter high/low registers */
+ if (soc_info->is64bit)
+ regmap_write(map, TCU_REG_OST_CNTL, 0);
+ regmap_write(map, TCU_REG_OST_CNTH, 0);
+
+ /* Don't reset counter at compare value. */
+ regmap_update_bits(map, TCU_REG_OST_TCSR,
+ TCU_OST_TCSR_MASK, TCU_OST_TCSR_CNT_MD);
+
+ rate = clk_get_rate(ost->clk);
+
+ /* Enable OST TCU channel */
+ regmap_write(map, TCU_REG_TESR, BIT(TCU_OST_CHANNEL));
+
+ cs = &ost->cs;
+ cs->name = "ingenic-ost";
+ cs->rating = 320;
+ cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+ cs->mask = CLOCKSOURCE_MASK(32);
+
+ if (soc_info->is64bit)
+ cs->read = ingenic_ost_clocksource_readl;
+ else
+ cs->read = ingenic_ost_clocksource_readh;
+
+ err = clocksource_register_hz(cs, rate);
+ if (err) {
+ dev_err(dev, "clocksource registration failed");
+ clk_disable_unprepare(ost->clk);
+ return err;
+ }
+
+ if (soc_info->is64bit)
+ sched_clock_register(ingenic_ost_read_cntl, 32, rate);
+ else
+ sched_clock_register(ingenic_ost_read_cnth, 32, rate);
+
+ return 0;
+}
+
+static int ingenic_ost_suspend(struct device *dev)
+{
+ struct ingenic_ost *ost = dev_get_drvdata(dev);
+
+ clk_disable(ost->clk);
+
+ return 0;
+}
+
+static int ingenic_ost_resume(struct device *dev)
+{
+ struct ingenic_ost *ost = dev_get_drvdata(dev);
+
+ return clk_enable(ost->clk);
+}
+
+static const struct dev_pm_ops ingenic_ost_pm_ops = {
+ /* _noirq: We want the OST clock to be gated last / ungated first */
+ .suspend_noirq = ingenic_ost_suspend,
+ .resume_noirq = ingenic_ost_resume,
+};
+
+static const struct ingenic_ost_soc_info jz4725b_ost_soc_info = {
+ .is64bit = false,
+};
+
+static const struct ingenic_ost_soc_info jz4760b_ost_soc_info = {
+ .is64bit = true,
+};
+
+static const struct of_device_id ingenic_ost_of_match[] = {
+ { .compatible = "ingenic,jz4725b-ost", .data = &jz4725b_ost_soc_info, },
+ { .compatible = "ingenic,jz4760b-ost", .data = &jz4760b_ost_soc_info, },
+ { .compatible = "ingenic,jz4770-ost", .data = &jz4760b_ost_soc_info, },
+ { }
+};
+
+static struct platform_driver ingenic_ost_driver = {
+ .driver = {
+ .name = "ingenic-ost",
+ .pm = pm_sleep_ptr(&ingenic_ost_pm_ops),
+ .of_match_table = ingenic_ost_of_match,
+ },
+};
+builtin_platform_driver_probe(ingenic_ost_driver, ingenic_ost_probe);
diff --git a/drivers/clocksource/ingenic-sysost.c b/drivers/clocksource/ingenic-sysost.c
new file mode 100644
index 0000000000..cb6fc2f152
--- /dev/null
+++ b/drivers/clocksource/ingenic-sysost.c
@@ -0,0 +1,540 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic XBurst SoCs SYSOST clocks driver
+ * Copyright (c) 2020 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/ingenic,sysost.h>
+
+/* OST register offsets */
+#define OST_REG_OSTCCR 0x00
+#define OST_REG_OSTCR 0x08
+#define OST_REG_OSTFR 0x0c
+#define OST_REG_OSTMR 0x10
+#define OST_REG_OST1DFR 0x14
+#define OST_REG_OST1CNT 0x18
+#define OST_REG_OST2CNTL 0x20
+#define OST_REG_OSTCNT2HBUF 0x24
+#define OST_REG_OSTESR 0x34
+#define OST_REG_OSTECR 0x38
+
+/* bits within the OSTCCR register */
+#define OSTCCR_PRESCALE1_MASK 0x3
+#define OSTCCR_PRESCALE2_MASK 0xc
+
+/* bits within the OSTCR register */
+#define OSTCR_OST1CLR BIT(0)
+#define OSTCR_OST2CLR BIT(1)
+
+/* bits within the OSTFR register */
+#define OSTFR_FFLAG BIT(0)
+
+/* bits within the OSTMR register */
+#define OSTMR_FMASK BIT(0)
+
+/* bits within the OSTESR register */
+#define OSTESR_OST1ENS BIT(0)
+#define OSTESR_OST2ENS BIT(1)
+
+/* bits within the OSTECR register */
+#define OSTECR_OST1ENC BIT(0)
+#define OSTECR_OST2ENC BIT(1)
+
+struct ingenic_soc_info {
+ unsigned int num_channels;
+};
+
+struct ingenic_ost_clk_info {
+ struct clk_init_data init_data;
+ u8 ostccr_reg;
+};
+
+struct ingenic_ost_clk {
+ struct clk_hw hw;
+ unsigned int idx;
+ struct ingenic_ost *ost;
+ const struct ingenic_ost_clk_info *info;
+};
+
+struct ingenic_ost {
+ void __iomem *base;
+ const struct ingenic_soc_info *soc_info;
+ struct clk *clk, *percpu_timer_clk, *global_timer_clk;
+ struct clock_event_device cevt;
+ struct clocksource cs;
+ char name[20];
+
+ struct clk_hw_onecell_data *clocks;
+};
+
+static struct ingenic_ost *ingenic_ost;
+
+static inline struct ingenic_ost_clk *to_ost_clk(struct clk_hw *hw)
+{
+ return container_of(hw, struct ingenic_ost_clk, hw);
+}
+
+static unsigned long ingenic_ost_percpu_timer_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct ingenic_ost_clk *ost_clk = to_ost_clk(hw);
+ const struct ingenic_ost_clk_info *info = ost_clk->info;
+ unsigned int prescale;
+
+ prescale = readl(ost_clk->ost->base + info->ostccr_reg);
+
+ prescale = FIELD_GET(OSTCCR_PRESCALE1_MASK, prescale);
+
+ return parent_rate >> (prescale * 2);
+}
+
+static unsigned long ingenic_ost_global_timer_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct ingenic_ost_clk *ost_clk = to_ost_clk(hw);
+ const struct ingenic_ost_clk_info *info = ost_clk->info;
+ unsigned int prescale;
+
+ prescale = readl(ost_clk->ost->base + info->ostccr_reg);
+
+ prescale = FIELD_GET(OSTCCR_PRESCALE2_MASK, prescale);
+
+ return parent_rate >> (prescale * 2);
+}
+
+static u8 ingenic_ost_get_prescale(unsigned long rate, unsigned long req_rate)
+{
+ u8 prescale;
+
+ for (prescale = 0; prescale < 2; prescale++)
+ if ((rate >> (prescale * 2)) <= req_rate)
+ return prescale;
+
+ return 2; /* /16 divider */
+}
+
+static long ingenic_ost_round_rate(struct clk_hw *hw, unsigned long req_rate,
+ unsigned long *parent_rate)
+{
+ unsigned long rate = *parent_rate;
+ u8 prescale;
+
+ if (req_rate > rate)
+ return rate;
+
+ prescale = ingenic_ost_get_prescale(rate, req_rate);
+
+ return rate >> (prescale * 2);
+}
+
+static int ingenic_ost_percpu_timer_set_rate(struct clk_hw *hw, unsigned long req_rate,
+ unsigned long parent_rate)
+{
+ struct ingenic_ost_clk *ost_clk = to_ost_clk(hw);
+ const struct ingenic_ost_clk_info *info = ost_clk->info;
+ u8 prescale = ingenic_ost_get_prescale(parent_rate, req_rate);
+ int val;
+
+ val = readl(ost_clk->ost->base + info->ostccr_reg);
+ val &= ~OSTCCR_PRESCALE1_MASK;
+ val |= FIELD_PREP(OSTCCR_PRESCALE1_MASK, prescale);
+ writel(val, ost_clk->ost->base + info->ostccr_reg);
+
+ return 0;
+}
+
+static int ingenic_ost_global_timer_set_rate(struct clk_hw *hw, unsigned long req_rate,
+ unsigned long parent_rate)
+{
+ struct ingenic_ost_clk *ost_clk = to_ost_clk(hw);
+ const struct ingenic_ost_clk_info *info = ost_clk->info;
+ u8 prescale = ingenic_ost_get_prescale(parent_rate, req_rate);
+ int val;
+
+ val = readl(ost_clk->ost->base + info->ostccr_reg);
+ val &= ~OSTCCR_PRESCALE2_MASK;
+ val |= FIELD_PREP(OSTCCR_PRESCALE2_MASK, prescale);
+ writel(val, ost_clk->ost->base + info->ostccr_reg);
+
+ return 0;
+}
+
+static const struct clk_ops ingenic_ost_percpu_timer_ops = {
+ .recalc_rate = ingenic_ost_percpu_timer_recalc_rate,
+ .round_rate = ingenic_ost_round_rate,
+ .set_rate = ingenic_ost_percpu_timer_set_rate,
+};
+
+static const struct clk_ops ingenic_ost_global_timer_ops = {
+ .recalc_rate = ingenic_ost_global_timer_recalc_rate,
+ .round_rate = ingenic_ost_round_rate,
+ .set_rate = ingenic_ost_global_timer_set_rate,
+};
+
+static const char * const ingenic_ost_clk_parents[] = { "ext" };
+
+static const struct ingenic_ost_clk_info x1000_ost_clk_info[] = {
+ [OST_CLK_PERCPU_TIMER] = {
+ .init_data = {
+ .name = "percpu timer",
+ .parent_names = ingenic_ost_clk_parents,
+ .num_parents = ARRAY_SIZE(ingenic_ost_clk_parents),
+ .ops = &ingenic_ost_percpu_timer_ops,
+ .flags = CLK_SET_RATE_UNGATE,
+ },
+ .ostccr_reg = OST_REG_OSTCCR,
+ },
+
+ [OST_CLK_GLOBAL_TIMER] = {
+ .init_data = {
+ .name = "global timer",
+ .parent_names = ingenic_ost_clk_parents,
+ .num_parents = ARRAY_SIZE(ingenic_ost_clk_parents),
+ .ops = &ingenic_ost_global_timer_ops,
+ .flags = CLK_SET_RATE_UNGATE,
+ },
+ .ostccr_reg = OST_REG_OSTCCR,
+ },
+};
+
+static u64 notrace ingenic_ost_global_timer_read_cntl(void)
+{
+ struct ingenic_ost *ost = ingenic_ost;
+ unsigned int count;
+
+ count = readl(ost->base + OST_REG_OST2CNTL);
+
+ return count;
+}
+
+static u64 notrace ingenic_ost_clocksource_read(struct clocksource *cs)
+{
+ return ingenic_ost_global_timer_read_cntl();
+}
+
+static inline struct ingenic_ost *to_ingenic_ost(struct clock_event_device *evt)
+{
+ return container_of(evt, struct ingenic_ost, cevt);
+}
+
+static int ingenic_ost_cevt_set_state_shutdown(struct clock_event_device *evt)
+{
+ struct ingenic_ost *ost = to_ingenic_ost(evt);
+
+ writel(OSTECR_OST1ENC, ost->base + OST_REG_OSTECR);
+
+ return 0;
+}
+
+static int ingenic_ost_cevt_set_next(unsigned long next,
+ struct clock_event_device *evt)
+{
+ struct ingenic_ost *ost = to_ingenic_ost(evt);
+
+ writel((u32)~OSTFR_FFLAG, ost->base + OST_REG_OSTFR);
+ writel(next, ost->base + OST_REG_OST1DFR);
+ writel(OSTCR_OST1CLR, ost->base + OST_REG_OSTCR);
+ writel(OSTESR_OST1ENS, ost->base + OST_REG_OSTESR);
+ writel((u32)~OSTMR_FMASK, ost->base + OST_REG_OSTMR);
+
+ return 0;
+}
+
+static irqreturn_t ingenic_ost_cevt_cb(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ struct ingenic_ost *ost = to_ingenic_ost(evt);
+
+ writel(OSTECR_OST1ENC, ost->base + OST_REG_OSTECR);
+
+ if (evt->event_handler)
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static int __init ingenic_ost_register_clock(struct ingenic_ost *ost,
+ unsigned int idx, const struct ingenic_ost_clk_info *info,
+ struct clk_hw_onecell_data *clocks)
+{
+ struct ingenic_ost_clk *ost_clk;
+ int val, err;
+
+ ost_clk = kzalloc(sizeof(*ost_clk), GFP_KERNEL);
+ if (!ost_clk)
+ return -ENOMEM;
+
+ ost_clk->hw.init = &info->init_data;
+ ost_clk->idx = idx;
+ ost_clk->info = info;
+ ost_clk->ost = ost;
+
+ /* Reset clock divider */
+ val = readl(ost->base + info->ostccr_reg);
+ val &= ~(OSTCCR_PRESCALE1_MASK | OSTCCR_PRESCALE2_MASK);
+ writel(val, ost->base + info->ostccr_reg);
+
+ err = clk_hw_register(NULL, &ost_clk->hw);
+ if (err) {
+ kfree(ost_clk);
+ return err;
+ }
+
+ clocks->hws[idx] = &ost_clk->hw;
+
+ return 0;
+}
+
+static struct clk * __init ingenic_ost_get_clock(struct device_node *np, int id)
+{
+ struct of_phandle_args args;
+
+ args.np = np;
+ args.args_count = 1;
+ args.args[0] = id;
+
+ return of_clk_get_from_provider(&args);
+}
+
+static int __init ingenic_ost_percpu_timer_init(struct device_node *np,
+ struct ingenic_ost *ost)
+{
+ unsigned int timer_virq, channel = OST_CLK_PERCPU_TIMER;
+ unsigned long rate;
+ int err;
+
+ ost->percpu_timer_clk = ingenic_ost_get_clock(np, channel);
+ if (IS_ERR(ost->percpu_timer_clk))
+ return PTR_ERR(ost->percpu_timer_clk);
+
+ err = clk_prepare_enable(ost->percpu_timer_clk);
+ if (err)
+ goto err_clk_put;
+
+ rate = clk_get_rate(ost->percpu_timer_clk);
+ if (!rate) {
+ err = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ timer_virq = of_irq_get(np, 0);
+ if (!timer_virq) {
+ err = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ snprintf(ost->name, sizeof(ost->name), "OST percpu timer");
+
+ err = request_irq(timer_virq, ingenic_ost_cevt_cb, IRQF_TIMER,
+ ost->name, &ost->cevt);
+ if (err)
+ goto err_irq_dispose_mapping;
+
+ ost->cevt.cpumask = cpumask_of(smp_processor_id());
+ ost->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
+ ost->cevt.name = ost->name;
+ ost->cevt.rating = 400;
+ ost->cevt.set_state_shutdown = ingenic_ost_cevt_set_state_shutdown;
+ ost->cevt.set_next_event = ingenic_ost_cevt_set_next;
+
+ clockevents_config_and_register(&ost->cevt, rate, 4, 0xffffffff);
+
+ return 0;
+
+err_irq_dispose_mapping:
+ irq_dispose_mapping(timer_virq);
+err_clk_disable:
+ clk_disable_unprepare(ost->percpu_timer_clk);
+err_clk_put:
+ clk_put(ost->percpu_timer_clk);
+ return err;
+}
+
+static int __init ingenic_ost_global_timer_init(struct device_node *np,
+ struct ingenic_ost *ost)
+{
+ unsigned int channel = OST_CLK_GLOBAL_TIMER;
+ struct clocksource *cs = &ost->cs;
+ unsigned long rate;
+ int err;
+
+ ost->global_timer_clk = ingenic_ost_get_clock(np, channel);
+ if (IS_ERR(ost->global_timer_clk))
+ return PTR_ERR(ost->global_timer_clk);
+
+ err = clk_prepare_enable(ost->global_timer_clk);
+ if (err)
+ goto err_clk_put;
+
+ rate = clk_get_rate(ost->global_timer_clk);
+ if (!rate) {
+ err = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ /* Clear counter CNT registers */
+ writel(OSTCR_OST2CLR, ost->base + OST_REG_OSTCR);
+
+ /* Enable OST channel */
+ writel(OSTESR_OST2ENS, ost->base + OST_REG_OSTESR);
+
+ cs->name = "ingenic-ost";
+ cs->rating = 400;
+ cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+ cs->mask = CLOCKSOURCE_MASK(32);
+ cs->read = ingenic_ost_clocksource_read;
+
+ err = clocksource_register_hz(cs, rate);
+ if (err)
+ goto err_clk_disable;
+
+ return 0;
+
+err_clk_disable:
+ clk_disable_unprepare(ost->global_timer_clk);
+err_clk_put:
+ clk_put(ost->global_timer_clk);
+ return err;
+}
+
+static const struct ingenic_soc_info x1000_soc_info = {
+ .num_channels = 2,
+};
+
+static const struct of_device_id __maybe_unused ingenic_ost_of_matches[] __initconst = {
+ { .compatible = "ingenic,x1000-ost", .data = &x1000_soc_info },
+ { /* sentinel */ }
+};
+
+static int __init ingenic_ost_probe(struct device_node *np)
+{
+ const struct of_device_id *id = of_match_node(ingenic_ost_of_matches, np);
+ struct ingenic_ost *ost;
+ unsigned int i;
+ int ret;
+
+ ost = kzalloc(sizeof(*ost), GFP_KERNEL);
+ if (!ost)
+ return -ENOMEM;
+
+ ost->base = of_io_request_and_map(np, 0, of_node_full_name(np));
+ if (IS_ERR(ost->base)) {
+ pr_err("%s: Failed to map OST registers\n", __func__);
+ ret = PTR_ERR(ost->base);
+ goto err_free_ost;
+ }
+
+ ost->clk = of_clk_get_by_name(np, "ost");
+ if (IS_ERR(ost->clk)) {
+ ret = PTR_ERR(ost->clk);
+ pr_crit("%s: Cannot get OST clock\n", __func__);
+ goto err_free_ost;
+ }
+
+ ret = clk_prepare_enable(ost->clk);
+ if (ret) {
+ pr_crit("%s: Unable to enable OST clock\n", __func__);
+ goto err_put_clk;
+ }
+
+ ost->soc_info = id->data;
+
+ ost->clocks = kzalloc(struct_size(ost->clocks, hws, ost->soc_info->num_channels),
+ GFP_KERNEL);
+ if (!ost->clocks) {
+ ret = -ENOMEM;
+ goto err_clk_disable;
+ }
+
+ ost->clocks->num = ost->soc_info->num_channels;
+
+ for (i = 0; i < ost->clocks->num; i++) {
+ ret = ingenic_ost_register_clock(ost, i, &x1000_ost_clk_info[i], ost->clocks);
+ if (ret) {
+ pr_crit("%s: Cannot register clock %d\n", __func__, i);
+ goto err_unregister_ost_clocks;
+ }
+ }
+
+ ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, ost->clocks);
+ if (ret) {
+ pr_crit("%s: Cannot add OF clock provider\n", __func__);
+ goto err_unregister_ost_clocks;
+ }
+
+ ingenic_ost = ost;
+
+ return 0;
+
+err_unregister_ost_clocks:
+ for (i = 0; i < ost->clocks->num; i++)
+ if (ost->clocks->hws[i])
+ clk_hw_unregister(ost->clocks->hws[i]);
+ kfree(ost->clocks);
+err_clk_disable:
+ clk_disable_unprepare(ost->clk);
+err_put_clk:
+ clk_put(ost->clk);
+err_free_ost:
+ kfree(ost);
+ return ret;
+}
+
+static int __init ingenic_ost_init(struct device_node *np)
+{
+ struct ingenic_ost *ost;
+ unsigned long rate;
+ int ret;
+
+ ret = ingenic_ost_probe(np);
+ if (ret) {
+ pr_crit("%s: Failed to initialize OST clocks: %d\n", __func__, ret);
+ return ret;
+ }
+
+ of_node_clear_flag(np, OF_POPULATED);
+
+ ost = ingenic_ost;
+ if (IS_ERR(ost))
+ return PTR_ERR(ost);
+
+ ret = ingenic_ost_global_timer_init(np, ost);
+ if (ret) {
+ pr_crit("%s: Unable to init global timer: %x\n", __func__, ret);
+ goto err_free_ingenic_ost;
+ }
+
+ ret = ingenic_ost_percpu_timer_init(np, ost);
+ if (ret)
+ goto err_ost_global_timer_cleanup;
+
+ /* Register the sched_clock at the end as there's no way to undo it */
+ rate = clk_get_rate(ost->global_timer_clk);
+ sched_clock_register(ingenic_ost_global_timer_read_cntl, 32, rate);
+
+ return 0;
+
+err_ost_global_timer_cleanup:
+ clocksource_unregister(&ost->cs);
+ clk_disable_unprepare(ost->global_timer_clk);
+ clk_put(ost->global_timer_clk);
+err_free_ingenic_ost:
+ kfree(ost);
+ return ret;
+}
+
+TIMER_OF_DECLARE(x1000_ost, "ingenic,x1000-ost", ingenic_ost_init);
diff --git a/drivers/clocksource/ingenic-timer.c b/drivers/clocksource/ingenic-timer.c
new file mode 100644
index 0000000000..154ee5f795
--- /dev/null
+++ b/drivers/clocksource/ingenic-timer.c
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic SoCs TCU IRQ driver
+ * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ * Copyright (C) 2020 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/cpuhotplug.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/ingenic-tcu.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/overflow.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/sched_clock.h>
+
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+static DEFINE_PER_CPU(call_single_data_t, ingenic_cevt_csd);
+
+struct ingenic_soc_info {
+ unsigned int num_channels;
+};
+
+struct ingenic_tcu_timer {
+ unsigned int cpu;
+ unsigned int channel;
+ struct clock_event_device cevt;
+ struct clk *clk;
+ char name[8];
+};
+
+struct ingenic_tcu {
+ struct regmap *map;
+ struct device_node *np;
+ struct clk *cs_clk;
+ unsigned int cs_channel;
+ struct clocksource cs;
+ unsigned long pwm_channels_mask;
+ struct ingenic_tcu_timer timers[];
+};
+
+static struct ingenic_tcu *ingenic_tcu;
+
+static u64 notrace ingenic_tcu_timer_read(void)
+{
+ struct ingenic_tcu *tcu = ingenic_tcu;
+ unsigned int count;
+
+ regmap_read(tcu->map, TCU_REG_TCNTc(tcu->cs_channel), &count);
+
+ return count;
+}
+
+static u64 notrace ingenic_tcu_timer_cs_read(struct clocksource *cs)
+{
+ return ingenic_tcu_timer_read();
+}
+
+static inline struct ingenic_tcu *
+to_ingenic_tcu(struct ingenic_tcu_timer *timer)
+{
+ return container_of(timer, struct ingenic_tcu, timers[timer->cpu]);
+}
+
+static inline struct ingenic_tcu_timer *
+to_ingenic_tcu_timer(struct clock_event_device *evt)
+{
+ return container_of(evt, struct ingenic_tcu_timer, cevt);
+}
+
+static int ingenic_tcu_cevt_set_state_shutdown(struct clock_event_device *evt)
+{
+ struct ingenic_tcu_timer *timer = to_ingenic_tcu_timer(evt);
+ struct ingenic_tcu *tcu = to_ingenic_tcu(timer);
+
+ regmap_write(tcu->map, TCU_REG_TECR, BIT(timer->channel));
+
+ return 0;
+}
+
+static int ingenic_tcu_cevt_set_next(unsigned long next,
+ struct clock_event_device *evt)
+{
+ struct ingenic_tcu_timer *timer = to_ingenic_tcu_timer(evt);
+ struct ingenic_tcu *tcu = to_ingenic_tcu(timer);
+
+ if (next > 0xffff)
+ return -EINVAL;
+
+ regmap_write(tcu->map, TCU_REG_TDFRc(timer->channel), next);
+ regmap_write(tcu->map, TCU_REG_TCNTc(timer->channel), 0);
+ regmap_write(tcu->map, TCU_REG_TESR, BIT(timer->channel));
+
+ return 0;
+}
+
+static void ingenic_per_cpu_event_handler(void *info)
+{
+ struct clock_event_device *cevt = (struct clock_event_device *) info;
+
+ cevt->event_handler(cevt);
+}
+
+static irqreturn_t ingenic_tcu_cevt_cb(int irq, void *dev_id)
+{
+ struct ingenic_tcu_timer *timer = dev_id;
+ struct ingenic_tcu *tcu = to_ingenic_tcu(timer);
+ call_single_data_t *csd;
+
+ regmap_write(tcu->map, TCU_REG_TECR, BIT(timer->channel));
+
+ if (timer->cevt.event_handler) {
+ csd = &per_cpu(ingenic_cevt_csd, timer->cpu);
+ csd->info = (void *) &timer->cevt;
+ csd->func = ingenic_per_cpu_event_handler;
+ smp_call_function_single_async(timer->cpu, csd);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct clk *ingenic_tcu_get_clock(struct device_node *np, int id)
+{
+ struct of_phandle_args args;
+
+ args.np = np;
+ args.args_count = 1;
+ args.args[0] = id;
+
+ return of_clk_get_from_provider(&args);
+}
+
+static int ingenic_tcu_setup_cevt(unsigned int cpu)
+{
+ struct ingenic_tcu *tcu = ingenic_tcu;
+ struct ingenic_tcu_timer *timer = &tcu->timers[cpu];
+ unsigned int timer_virq;
+ struct irq_domain *domain;
+ unsigned long rate;
+ int err;
+
+ timer->clk = ingenic_tcu_get_clock(tcu->np, timer->channel);
+ if (IS_ERR(timer->clk))
+ return PTR_ERR(timer->clk);
+
+ err = clk_prepare_enable(timer->clk);
+ if (err)
+ goto err_clk_put;
+
+ rate = clk_get_rate(timer->clk);
+ if (!rate) {
+ err = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ domain = irq_find_host(tcu->np);
+ if (!domain) {
+ err = -ENODEV;
+ goto err_clk_disable;
+ }
+
+ timer_virq = irq_create_mapping(domain, timer->channel);
+ if (!timer_virq) {
+ err = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ snprintf(timer->name, sizeof(timer->name), "TCU%u", timer->channel);
+
+ err = request_irq(timer_virq, ingenic_tcu_cevt_cb, IRQF_TIMER,
+ timer->name, timer);
+ if (err)
+ goto err_irq_dispose_mapping;
+
+ timer->cpu = smp_processor_id();
+ timer->cevt.cpumask = cpumask_of(smp_processor_id());
+ timer->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
+ timer->cevt.name = timer->name;
+ timer->cevt.rating = 200;
+ timer->cevt.set_state_shutdown = ingenic_tcu_cevt_set_state_shutdown;
+ timer->cevt.set_next_event = ingenic_tcu_cevt_set_next;
+
+ clockevents_config_and_register(&timer->cevt, rate, 10, 0xffff);
+
+ return 0;
+
+err_irq_dispose_mapping:
+ irq_dispose_mapping(timer_virq);
+err_clk_disable:
+ clk_disable_unprepare(timer->clk);
+err_clk_put:
+ clk_put(timer->clk);
+ return err;
+}
+
+static int __init ingenic_tcu_clocksource_init(struct device_node *np,
+ struct ingenic_tcu *tcu)
+{
+ unsigned int channel = tcu->cs_channel;
+ struct clocksource *cs = &tcu->cs;
+ unsigned long rate;
+ int err;
+
+ tcu->cs_clk = ingenic_tcu_get_clock(np, channel);
+ if (IS_ERR(tcu->cs_clk))
+ return PTR_ERR(tcu->cs_clk);
+
+ err = clk_prepare_enable(tcu->cs_clk);
+ if (err)
+ goto err_clk_put;
+
+ rate = clk_get_rate(tcu->cs_clk);
+ if (!rate) {
+ err = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ /* Reset channel */
+ regmap_update_bits(tcu->map, TCU_REG_TCSRc(channel),
+ 0xffff & ~TCU_TCSR_RESERVED_BITS, 0);
+
+ /* Reset counter */
+ regmap_write(tcu->map, TCU_REG_TDFRc(channel), 0xffff);
+ regmap_write(tcu->map, TCU_REG_TCNTc(channel), 0);
+
+ /* Enable channel */
+ regmap_write(tcu->map, TCU_REG_TESR, BIT(channel));
+
+ cs->name = "ingenic-timer";
+ cs->rating = 200;
+ cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+ cs->mask = CLOCKSOURCE_MASK(16);
+ cs->read = ingenic_tcu_timer_cs_read;
+
+ err = clocksource_register_hz(cs, rate);
+ if (err)
+ goto err_clk_disable;
+
+ return 0;
+
+err_clk_disable:
+ clk_disable_unprepare(tcu->cs_clk);
+err_clk_put:
+ clk_put(tcu->cs_clk);
+ return err;
+}
+
+static const struct ingenic_soc_info jz4740_soc_info = {
+ .num_channels = 8,
+};
+
+static const struct ingenic_soc_info jz4725b_soc_info = {
+ .num_channels = 6,
+};
+
+static const struct of_device_id ingenic_tcu_of_match[] = {
+ { .compatible = "ingenic,jz4740-tcu", .data = &jz4740_soc_info, },
+ { .compatible = "ingenic,jz4725b-tcu", .data = &jz4725b_soc_info, },
+ { .compatible = "ingenic,jz4760-tcu", .data = &jz4740_soc_info, },
+ { .compatible = "ingenic,jz4770-tcu", .data = &jz4740_soc_info, },
+ { .compatible = "ingenic,x1000-tcu", .data = &jz4740_soc_info, },
+ { /* sentinel */ }
+};
+
+static int __init ingenic_tcu_init(struct device_node *np)
+{
+ const struct of_device_id *id = of_match_node(ingenic_tcu_of_match, np);
+ const struct ingenic_soc_info *soc_info = id->data;
+ struct ingenic_tcu_timer *timer;
+ struct ingenic_tcu *tcu;
+ struct regmap *map;
+ unsigned int cpu;
+ int ret, last_bit = -1;
+ long rate;
+
+ of_node_clear_flag(np, OF_POPULATED);
+
+ map = device_node_to_regmap(np);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+
+ tcu = kzalloc(struct_size(tcu, timers, num_possible_cpus()),
+ GFP_KERNEL);
+ if (!tcu)
+ return -ENOMEM;
+
+ /*
+ * Enable all TCU channels for PWM use by default except channels 0/1,
+ * and channel 2 if target CPU is JZ4780/X2000 and SMP is selected.
+ */
+ tcu->pwm_channels_mask = GENMASK(soc_info->num_channels - 1,
+ num_possible_cpus() + 1);
+ of_property_read_u32(np, "ingenic,pwm-channels-mask",
+ (u32 *)&tcu->pwm_channels_mask);
+
+ /* Verify that we have at least num_possible_cpus() + 1 free channels */
+ if (hweight8(tcu->pwm_channels_mask) >
+ soc_info->num_channels - num_possible_cpus() + 1) {
+ pr_crit("%s: Invalid PWM channel mask: 0x%02lx\n", __func__,
+ tcu->pwm_channels_mask);
+ ret = -EINVAL;
+ goto err_free_ingenic_tcu;
+ }
+
+ tcu->map = map;
+ tcu->np = np;
+ ingenic_tcu = tcu;
+
+ for (cpu = 0; cpu < num_possible_cpus(); cpu++) {
+ timer = &tcu->timers[cpu];
+
+ timer->cpu = cpu;
+ timer->channel = find_next_zero_bit(&tcu->pwm_channels_mask,
+ soc_info->num_channels,
+ last_bit + 1);
+ last_bit = timer->channel;
+ }
+
+ tcu->cs_channel = find_next_zero_bit(&tcu->pwm_channels_mask,
+ soc_info->num_channels,
+ last_bit + 1);
+
+ ret = ingenic_tcu_clocksource_init(np, tcu);
+ if (ret) {
+ pr_crit("%s: Unable to init clocksource: %d\n", __func__, ret);
+ goto err_free_ingenic_tcu;
+ }
+
+ /* Setup clock events on each CPU core */
+ ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "Ingenic XBurst: online",
+ ingenic_tcu_setup_cevt, NULL);
+ if (ret < 0) {
+ pr_crit("%s: Unable to start CPU timers: %d\n", __func__, ret);
+ goto err_tcu_clocksource_cleanup;
+ }
+
+ /* Register the sched_clock at the end as there's no way to undo it */
+ rate = clk_get_rate(tcu->cs_clk);
+ sched_clock_register(ingenic_tcu_timer_read, 16, rate);
+
+ return 0;
+
+err_tcu_clocksource_cleanup:
+ clocksource_unregister(&tcu->cs);
+ clk_disable_unprepare(tcu->cs_clk);
+ clk_put(tcu->cs_clk);
+err_free_ingenic_tcu:
+ kfree(tcu);
+ return ret;
+}
+
+TIMER_OF_DECLARE(jz4740_tcu_intc, "ingenic,jz4740-tcu", ingenic_tcu_init);
+TIMER_OF_DECLARE(jz4725b_tcu_intc, "ingenic,jz4725b-tcu", ingenic_tcu_init);
+TIMER_OF_DECLARE(jz4760_tcu_intc, "ingenic,jz4760-tcu", ingenic_tcu_init);
+TIMER_OF_DECLARE(jz4770_tcu_intc, "ingenic,jz4770-tcu", ingenic_tcu_init);
+TIMER_OF_DECLARE(x1000_tcu_intc, "ingenic,x1000-tcu", ingenic_tcu_init);
+
+static int __init ingenic_tcu_probe(struct platform_device *pdev)
+{
+ platform_set_drvdata(pdev, ingenic_tcu);
+
+ return 0;
+}
+
+static int ingenic_tcu_suspend(struct device *dev)
+{
+ struct ingenic_tcu *tcu = dev_get_drvdata(dev);
+ unsigned int cpu;
+
+ clk_disable(tcu->cs_clk);
+
+ for (cpu = 0; cpu < num_online_cpus(); cpu++)
+ clk_disable(tcu->timers[cpu].clk);
+
+ return 0;
+}
+
+static int ingenic_tcu_resume(struct device *dev)
+{
+ struct ingenic_tcu *tcu = dev_get_drvdata(dev);
+ unsigned int cpu;
+ int ret;
+
+ for (cpu = 0; cpu < num_online_cpus(); cpu++) {
+ ret = clk_enable(tcu->timers[cpu].clk);
+ if (ret)
+ goto err_timer_clk_disable;
+ }
+
+ ret = clk_enable(tcu->cs_clk);
+ if (ret)
+ goto err_timer_clk_disable;
+
+ return 0;
+
+err_timer_clk_disable:
+ for (; cpu > 0; cpu--)
+ clk_disable(tcu->timers[cpu - 1].clk);
+ return ret;
+}
+
+static const struct dev_pm_ops ingenic_tcu_pm_ops = {
+ /* _noirq: We want the TCU clocks to be gated last / ungated first */
+ .suspend_noirq = ingenic_tcu_suspend,
+ .resume_noirq = ingenic_tcu_resume,
+};
+
+static struct platform_driver ingenic_tcu_driver = {
+ .driver = {
+ .name = "ingenic-tcu-timer",
+ .pm = pm_sleep_ptr(&ingenic_tcu_pm_ops),
+ .of_match_table = ingenic_tcu_of_match,
+ },
+};
+builtin_platform_driver_probe(ingenic_tcu_driver, ingenic_tcu_probe);
diff --git a/drivers/clocksource/jcore-pit.c b/drivers/clocksource/jcore-pit.c
new file mode 100644
index 0000000000..a4a991101f
--- /dev/null
+++ b/drivers/clocksource/jcore-pit.c
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * J-Core SoC PIT/clocksource driver
+ *
+ * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/sched_clock.h>
+#include <linux/cpu.h>
+#include <linux/cpuhotplug.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define PIT_IRQ_SHIFT 12
+#define PIT_PRIO_SHIFT 20
+#define PIT_ENABLE_SHIFT 26
+#define PIT_PRIO_MASK 0xf
+
+#define REG_PITEN 0x00
+#define REG_THROT 0x10
+#define REG_COUNT 0x14
+#define REG_BUSPD 0x18
+#define REG_SECHI 0x20
+#define REG_SECLO 0x24
+#define REG_NSEC 0x28
+
+struct jcore_pit {
+ struct clock_event_device ced;
+ void __iomem *base;
+ unsigned long periodic_delta;
+ u32 enable_val;
+};
+
+static void __iomem *jcore_pit_base;
+static struct jcore_pit __percpu *jcore_pit_percpu;
+
+static notrace u64 jcore_sched_clock_read(void)
+{
+ u32 seclo, nsec, seclo0;
+ __iomem void *base = jcore_pit_base;
+
+ seclo = readl(base + REG_SECLO);
+ do {
+ seclo0 = seclo;
+ nsec = readl(base + REG_NSEC);
+ seclo = readl(base + REG_SECLO);
+ } while (seclo0 != seclo);
+
+ return seclo * NSEC_PER_SEC + nsec;
+}
+
+static u64 jcore_clocksource_read(struct clocksource *cs)
+{
+ return jcore_sched_clock_read();
+}
+
+static int jcore_pit_disable(struct jcore_pit *pit)
+{
+ writel(0, pit->base + REG_PITEN);
+ return 0;
+}
+
+static int jcore_pit_set(unsigned long delta, struct jcore_pit *pit)
+{
+ jcore_pit_disable(pit);
+ writel(delta, pit->base + REG_THROT);
+ writel(pit->enable_val, pit->base + REG_PITEN);
+ return 0;
+}
+
+static int jcore_pit_set_state_shutdown(struct clock_event_device *ced)
+{
+ struct jcore_pit *pit = container_of(ced, struct jcore_pit, ced);
+
+ return jcore_pit_disable(pit);
+}
+
+static int jcore_pit_set_state_oneshot(struct clock_event_device *ced)
+{
+ struct jcore_pit *pit = container_of(ced, struct jcore_pit, ced);
+
+ return jcore_pit_disable(pit);
+}
+
+static int jcore_pit_set_state_periodic(struct clock_event_device *ced)
+{
+ struct jcore_pit *pit = container_of(ced, struct jcore_pit, ced);
+
+ return jcore_pit_set(pit->periodic_delta, pit);
+}
+
+static int jcore_pit_set_next_event(unsigned long delta,
+ struct clock_event_device *ced)
+{
+ struct jcore_pit *pit = container_of(ced, struct jcore_pit, ced);
+
+ return jcore_pit_set(delta, pit);
+}
+
+static int jcore_pit_local_init(unsigned cpu)
+{
+ struct jcore_pit *pit = this_cpu_ptr(jcore_pit_percpu);
+ unsigned buspd, freq;
+
+ pr_info("Local J-Core PIT init on cpu %u\n", cpu);
+
+ buspd = readl(pit->base + REG_BUSPD);
+ freq = DIV_ROUND_CLOSEST(NSEC_PER_SEC, buspd);
+ pit->periodic_delta = DIV_ROUND_CLOSEST(NSEC_PER_SEC, HZ * buspd);
+
+ clockevents_config_and_register(&pit->ced, freq, 1, ULONG_MAX);
+
+ return 0;
+}
+
+static irqreturn_t jcore_timer_interrupt(int irq, void *dev_id)
+{
+ struct jcore_pit *pit = this_cpu_ptr(dev_id);
+
+ if (clockevent_state_oneshot(&pit->ced))
+ jcore_pit_disable(pit);
+
+ pit->ced.event_handler(&pit->ced);
+
+ return IRQ_HANDLED;
+}
+
+static int __init jcore_pit_init(struct device_node *node)
+{
+ int err;
+ unsigned pit_irq, cpu;
+ unsigned long hwirq;
+ u32 irqprio, enable_val;
+
+ jcore_pit_base = of_iomap(node, 0);
+ if (!jcore_pit_base) {
+ pr_err("Error: Cannot map base address for J-Core PIT\n");
+ return -ENXIO;
+ }
+
+ pit_irq = irq_of_parse_and_map(node, 0);
+ if (!pit_irq) {
+ pr_err("Error: J-Core PIT has no IRQ\n");
+ return -ENXIO;
+ }
+
+ pr_info("Initializing J-Core PIT at %p IRQ %d\n",
+ jcore_pit_base, pit_irq);
+
+ err = clocksource_mmio_init(jcore_pit_base, "jcore_pit_cs",
+ NSEC_PER_SEC, 400, 32,
+ jcore_clocksource_read);
+ if (err) {
+ pr_err("Error registering clocksource device: %d\n", err);
+ return err;
+ }
+
+ sched_clock_register(jcore_sched_clock_read, 32, NSEC_PER_SEC);
+
+ jcore_pit_percpu = alloc_percpu(struct jcore_pit);
+ if (!jcore_pit_percpu) {
+ pr_err("Failed to allocate memory for clock event device\n");
+ return -ENOMEM;
+ }
+
+ err = request_irq(pit_irq, jcore_timer_interrupt,
+ IRQF_TIMER | IRQF_PERCPU,
+ "jcore_pit", jcore_pit_percpu);
+ if (err) {
+ pr_err("pit irq request failed: %d\n", err);
+ free_percpu(jcore_pit_percpu);
+ return err;
+ }
+
+ /*
+ * The J-Core PIT is not hard-wired to a particular IRQ, but
+ * integrated with the interrupt controller such that the IRQ it
+ * generates is programmable, as follows:
+ *
+ * The bit layout of the PIT enable register is:
+ *
+ * .....e..ppppiiiiiiii............
+ *
+ * where the .'s indicate unrelated/unused bits, e is enable,
+ * p is priority, and i is hard irq number.
+ *
+ * For the PIT included in AIC1 (obsolete but still in use),
+ * any hard irq (trap number) can be programmed via the 8
+ * iiiiiiii bits, and a priority (0-15) is programmable
+ * separately in the pppp bits.
+ *
+ * For the PIT included in AIC2 (current), the programming
+ * interface is equivalent modulo interrupt mapping. This is
+ * why a different compatible tag was not used. However only
+ * traps 64-127 (the ones actually intended to be used for
+ * interrupts, rather than syscalls/exceptions/etc.) can be
+ * programmed (the high 2 bits of i are ignored) and the
+ * priority pppp is <<2'd and or'd onto the irq number. This
+ * choice seems to have been made on the hardware engineering
+ * side under an assumption that preserving old AIC1 priority
+ * mappings was important. Future models will likely ignore
+ * the pppp field.
+ */
+ hwirq = irq_get_irq_data(pit_irq)->hwirq;
+ irqprio = (hwirq >> 2) & PIT_PRIO_MASK;
+ enable_val = (1U << PIT_ENABLE_SHIFT)
+ | (hwirq << PIT_IRQ_SHIFT)
+ | (irqprio << PIT_PRIO_SHIFT);
+
+ for_each_present_cpu(cpu) {
+ struct jcore_pit *pit = per_cpu_ptr(jcore_pit_percpu, cpu);
+
+ pit->base = of_iomap(node, cpu);
+ if (!pit->base) {
+ pr_err("Unable to map PIT for cpu %u\n", cpu);
+ continue;
+ }
+
+ pit->ced.name = "jcore_pit";
+ pit->ced.features = CLOCK_EVT_FEAT_PERIODIC
+ | CLOCK_EVT_FEAT_ONESHOT
+ | CLOCK_EVT_FEAT_PERCPU;
+ pit->ced.cpumask = cpumask_of(cpu);
+ pit->ced.rating = 400;
+ pit->ced.irq = pit_irq;
+ pit->ced.set_state_shutdown = jcore_pit_set_state_shutdown;
+ pit->ced.set_state_periodic = jcore_pit_set_state_periodic;
+ pit->ced.set_state_oneshot = jcore_pit_set_state_oneshot;
+ pit->ced.set_next_event = jcore_pit_set_next_event;
+
+ pit->enable_val = enable_val;
+ }
+
+ cpuhp_setup_state(CPUHP_AP_JCORE_TIMER_STARTING,
+ "clockevents/jcore:starting",
+ jcore_pit_local_init, NULL);
+
+ return 0;
+}
+
+TIMER_OF_DECLARE(jcore_pit, "jcore,pit", jcore_pit_init);
diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c
new file mode 100644
index 0000000000..b3ae38f367
--- /dev/null
+++ b/drivers/clocksource/mips-gic-timer.c
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
+
+#define pr_fmt(fmt) "mips-gic-timer: " fmt
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/of_irq.h>
+#include <linux/percpu.h>
+#include <linux/sched_clock.h>
+#include <linux/smp.h>
+#include <linux/time.h>
+#include <asm/mips-cps.h>
+
+static DEFINE_PER_CPU(struct clock_event_device, gic_clockevent_device);
+static int gic_timer_irq;
+static unsigned int gic_frequency;
+static bool __read_mostly gic_clock_unstable;
+
+static void gic_clocksource_unstable(char *reason);
+
+static u64 notrace gic_read_count_2x32(void)
+{
+ unsigned int hi, hi2, lo;
+
+ do {
+ hi = read_gic_counter_32h();
+ lo = read_gic_counter_32l();
+ hi2 = read_gic_counter_32h();
+ } while (hi2 != hi);
+
+ return (((u64) hi) << 32) + lo;
+}
+
+static u64 notrace gic_read_count_64(void)
+{
+ return read_gic_counter();
+}
+
+static u64 notrace gic_read_count(void)
+{
+ if (mips_cm_is64)
+ return gic_read_count_64();
+
+ return gic_read_count_2x32();
+}
+
+static int gic_next_event(unsigned long delta, struct clock_event_device *evt)
+{
+ int cpu = cpumask_first(evt->cpumask);
+ u64 cnt;
+ int res;
+
+ cnt = gic_read_count();
+ cnt += (u64)delta;
+ if (cpu == raw_smp_processor_id()) {
+ write_gic_vl_compare(cnt);
+ } else {
+ write_gic_vl_other(mips_cm_vp_id(cpu));
+ write_gic_vo_compare(cnt);
+ }
+ res = ((int)(gic_read_count() - cnt) >= 0) ? -ETIME : 0;
+ return res;
+}
+
+static irqreturn_t gic_compare_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *cd = dev_id;
+
+ write_gic_vl_compare(read_gic_vl_compare());
+ cd->event_handler(cd);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction gic_compare_irqaction = {
+ .handler = gic_compare_interrupt,
+ .percpu_dev_id = &gic_clockevent_device,
+ .flags = IRQF_PERCPU | IRQF_TIMER,
+ .name = "timer",
+};
+
+static void gic_clockevent_cpu_init(unsigned int cpu,
+ struct clock_event_device *cd)
+{
+ cd->name = "MIPS GIC";
+ cd->features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_C3STOP;
+
+ cd->rating = 350;
+ cd->irq = gic_timer_irq;
+ cd->cpumask = cpumask_of(cpu);
+ cd->set_next_event = gic_next_event;
+
+ clockevents_config_and_register(cd, gic_frequency, 0x300, 0x7fffffff);
+
+ enable_percpu_irq(gic_timer_irq, IRQ_TYPE_NONE);
+}
+
+static void gic_clockevent_cpu_exit(struct clock_event_device *cd)
+{
+ disable_percpu_irq(gic_timer_irq);
+}
+
+static void gic_update_frequency(void *data)
+{
+ unsigned long rate = (unsigned long)data;
+
+ clockevents_update_freq(this_cpu_ptr(&gic_clockevent_device), rate);
+}
+
+static int gic_starting_cpu(unsigned int cpu)
+{
+ gic_clockevent_cpu_init(cpu, this_cpu_ptr(&gic_clockevent_device));
+ return 0;
+}
+
+static int gic_clk_notifier(struct notifier_block *nb, unsigned long action,
+ void *data)
+{
+ struct clk_notifier_data *cnd = data;
+
+ if (action == POST_RATE_CHANGE) {
+ gic_clocksource_unstable("ref clock rate change");
+ on_each_cpu(gic_update_frequency, (void *)cnd->new_rate, 1);
+ }
+
+ return NOTIFY_OK;
+}
+
+static int gic_dying_cpu(unsigned int cpu)
+{
+ gic_clockevent_cpu_exit(this_cpu_ptr(&gic_clockevent_device));
+ return 0;
+}
+
+static struct notifier_block gic_clk_nb = {
+ .notifier_call = gic_clk_notifier,
+};
+
+static int gic_clockevent_init(void)
+{
+ int ret;
+
+ if (!gic_frequency)
+ return -ENXIO;
+
+ ret = setup_percpu_irq(gic_timer_irq, &gic_compare_irqaction);
+ if (ret < 0) {
+ pr_err("IRQ %d setup failed (%d)\n", gic_timer_irq, ret);
+ return ret;
+ }
+
+ cpuhp_setup_state(CPUHP_AP_MIPS_GIC_TIMER_STARTING,
+ "clockevents/mips/gic/timer:starting",
+ gic_starting_cpu, gic_dying_cpu);
+ return 0;
+}
+
+static u64 gic_hpt_read(struct clocksource *cs)
+{
+ return gic_read_count();
+}
+
+static struct clocksource gic_clocksource = {
+ .name = "GIC",
+ .read = gic_hpt_read,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .vdso_clock_mode = VDSO_CLOCKMODE_GIC,
+};
+
+static void gic_clocksource_unstable(char *reason)
+{
+ if (gic_clock_unstable)
+ return;
+
+ gic_clock_unstable = true;
+
+ pr_info("GIC timer is unstable due to %s\n", reason);
+
+ clocksource_mark_unstable(&gic_clocksource);
+}
+
+static int __init __gic_clocksource_init(void)
+{
+ unsigned int count_width;
+ int ret;
+
+ /* Set clocksource mask. */
+ count_width = read_gic_config() & GIC_CONFIG_COUNTBITS;
+ count_width >>= __ffs(GIC_CONFIG_COUNTBITS);
+ count_width *= 4;
+ count_width += 32;
+ gic_clocksource.mask = CLOCKSOURCE_MASK(count_width);
+
+ /* Calculate a somewhat reasonable rating value. */
+ gic_clocksource.rating = 200 + gic_frequency / 10000000;
+
+ ret = clocksource_register_hz(&gic_clocksource, gic_frequency);
+ if (ret < 0)
+ pr_warn("Unable to register clocksource\n");
+
+ return ret;
+}
+
+static int __init gic_clocksource_of_init(struct device_node *node)
+{
+ struct clk *clk;
+ int ret;
+
+ if (!mips_gic_present() || !node->parent ||
+ !of_device_is_compatible(node->parent, "mti,gic")) {
+ pr_warn("No DT definition\n");
+ return -ENXIO;
+ }
+
+ clk = of_clk_get(node, 0);
+ if (!IS_ERR(clk)) {
+ ret = clk_prepare_enable(clk);
+ if (ret < 0) {
+ pr_err("Failed to enable clock\n");
+ clk_put(clk);
+ return ret;
+ }
+
+ gic_frequency = clk_get_rate(clk);
+ } else if (of_property_read_u32(node, "clock-frequency",
+ &gic_frequency)) {
+ pr_err("Frequency not specified\n");
+ return -EINVAL;
+ }
+ gic_timer_irq = irq_of_parse_and_map(node, 0);
+ if (!gic_timer_irq) {
+ pr_err("IRQ not specified\n");
+ return -EINVAL;
+ }
+
+ ret = __gic_clocksource_init();
+ if (ret)
+ return ret;
+
+ ret = gic_clockevent_init();
+ if (!ret && !IS_ERR(clk)) {
+ if (clk_notifier_register(clk, &gic_clk_nb) < 0)
+ pr_warn("Unable to register clock notifier\n");
+ }
+
+ /* And finally start the counter */
+ clear_gic_config(GIC_CONFIG_COUNTSTOP);
+
+ /*
+ * It's safe to use the MIPS GIC timer as a sched clock source only if
+ * its ticks are stable, which is true on either the platforms with
+ * stable CPU frequency or on the platforms with CM3 and CPU frequency
+ * change performed by the CPC core clocks divider.
+ */
+ if (mips_cm_revision() >= CM_REV_CM3 || !IS_ENABLED(CONFIG_CPU_FREQ)) {
+ sched_clock_register(mips_cm_is64 ?
+ gic_read_count_64 : gic_read_count_2x32,
+ 64, gic_frequency);
+ }
+
+ return 0;
+}
+TIMER_OF_DECLARE(mips_gic_timer, "mti,gic-timer",
+ gic_clocksource_of_init);
diff --git a/drivers/clocksource/mmio.c b/drivers/clocksource/mmio.c
new file mode 100644
index 0000000000..9de7515318
--- /dev/null
+++ b/drivers/clocksource/mmio.c
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Generic MMIO clocksource support
+ */
+#include <linux/clocksource.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+
+struct clocksource_mmio {
+ void __iomem *reg;
+ struct clocksource clksrc;
+};
+
+static inline struct clocksource_mmio *to_mmio_clksrc(struct clocksource *c)
+{
+ return container_of(c, struct clocksource_mmio, clksrc);
+}
+
+u64 clocksource_mmio_readl_up(struct clocksource *c)
+{
+ return (u64)readl_relaxed(to_mmio_clksrc(c)->reg);
+}
+
+u64 clocksource_mmio_readl_down(struct clocksource *c)
+{
+ return ~(u64)readl_relaxed(to_mmio_clksrc(c)->reg) & c->mask;
+}
+
+u64 clocksource_mmio_readw_up(struct clocksource *c)
+{
+ return (u64)readw_relaxed(to_mmio_clksrc(c)->reg);
+}
+
+u64 clocksource_mmio_readw_down(struct clocksource *c)
+{
+ return ~(u64)readw_relaxed(to_mmio_clksrc(c)->reg) & c->mask;
+}
+
+/**
+ * clocksource_mmio_init - Initialize a simple mmio based clocksource
+ * @base: Virtual address of the clock readout register
+ * @name: Name of the clocksource
+ * @hz: Frequency of the clocksource in Hz
+ * @rating: Rating of the clocksource
+ * @bits: Number of valid bits
+ * @read: One of clocksource_mmio_read*() above
+ */
+int __init clocksource_mmio_init(void __iomem *base, const char *name,
+ unsigned long hz, int rating, unsigned bits,
+ u64 (*read)(struct clocksource *))
+{
+ struct clocksource_mmio *cs;
+
+ if (bits > 64 || bits < 16)
+ return -EINVAL;
+
+ cs = kzalloc(sizeof(struct clocksource_mmio), GFP_KERNEL);
+ if (!cs)
+ return -ENOMEM;
+
+ cs->reg = base;
+ cs->clksrc.name = name;
+ cs->clksrc.rating = rating;
+ cs->clksrc.read = read;
+ cs->clksrc.mask = CLOCKSOURCE_MASK(bits);
+ cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ return clocksource_register_hz(&cs->clksrc, hz);
+}
diff --git a/drivers/clocksource/mps2-timer.c b/drivers/clocksource/mps2-timer.c
new file mode 100644
index 0000000000..efe8cad8f2
--- /dev/null
+++ b/drivers/clocksource/mps2-timer.c
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+#define TIMER_CTRL 0x0
+#define TIMER_CTRL_ENABLE BIT(0)
+#define TIMER_CTRL_IE BIT(3)
+
+#define TIMER_VALUE 0x4
+#define TIMER_RELOAD 0x8
+#define TIMER_INT 0xc
+
+struct clockevent_mps2 {
+ void __iomem *reg;
+ u32 clock_count_per_tick;
+ struct clock_event_device clkevt;
+};
+
+static void __iomem *sched_clock_base;
+
+static u64 notrace mps2_sched_read(void)
+{
+ return ~readl_relaxed(sched_clock_base + TIMER_VALUE);
+}
+
+static inline struct clockevent_mps2 *to_mps2_clkevt(struct clock_event_device *c)
+{
+ return container_of(c, struct clockevent_mps2, clkevt);
+}
+
+static void clockevent_mps2_writel(u32 val, struct clock_event_device *c, u32 offset)
+{
+ writel_relaxed(val, to_mps2_clkevt(c)->reg + offset);
+}
+
+static int mps2_timer_shutdown(struct clock_event_device *ce)
+{
+ clockevent_mps2_writel(0, ce, TIMER_RELOAD);
+ clockevent_mps2_writel(0, ce, TIMER_CTRL);
+
+ return 0;
+}
+
+static int mps2_timer_set_next_event(unsigned long next, struct clock_event_device *ce)
+{
+ clockevent_mps2_writel(next, ce, TIMER_VALUE);
+ clockevent_mps2_writel(TIMER_CTRL_IE | TIMER_CTRL_ENABLE, ce, TIMER_CTRL);
+
+ return 0;
+}
+
+static int mps2_timer_set_periodic(struct clock_event_device *ce)
+{
+ u32 clock_count_per_tick = to_mps2_clkevt(ce)->clock_count_per_tick;
+
+ clockevent_mps2_writel(clock_count_per_tick, ce, TIMER_RELOAD);
+ clockevent_mps2_writel(clock_count_per_tick, ce, TIMER_VALUE);
+ clockevent_mps2_writel(TIMER_CTRL_IE | TIMER_CTRL_ENABLE, ce, TIMER_CTRL);
+
+ return 0;
+}
+
+static irqreturn_t mps2_timer_interrupt(int irq, void *dev_id)
+{
+ struct clockevent_mps2 *ce = dev_id;
+ u32 status = readl_relaxed(ce->reg + TIMER_INT);
+
+ if (!status) {
+ pr_warn("spurious interrupt\n");
+ return IRQ_NONE;
+ }
+
+ writel_relaxed(1, ce->reg + TIMER_INT);
+
+ ce->clkevt.event_handler(&ce->clkevt);
+
+ return IRQ_HANDLED;
+}
+
+static int __init mps2_clockevent_init(struct device_node *np)
+{
+ void __iomem *base;
+ struct clk *clk = NULL;
+ struct clockevent_mps2 *ce;
+ u32 rate;
+ int irq, ret;
+ const char *name = "mps2-clkevt";
+
+ ret = of_property_read_u32(np, "clock-frequency", &rate);
+ if (ret) {
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ pr_err("failed to get clock for clockevent: %d\n", ret);
+ goto out;
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("failed to enable clock for clockevent: %d\n", ret);
+ goto out_clk_put;
+ }
+
+ rate = clk_get_rate(clk);
+ }
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ ret = -EADDRNOTAVAIL;
+ pr_err("failed to map register for clockevent: %d\n", ret);
+ goto out_clk_disable;
+ }
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq) {
+ ret = -ENOENT;
+ pr_err("failed to get irq for clockevent: %d\n", ret);
+ goto out_iounmap;
+ }
+
+ ce = kzalloc(sizeof(*ce), GFP_KERNEL);
+ if (!ce) {
+ ret = -ENOMEM;
+ goto out_iounmap;
+ }
+
+ ce->reg = base;
+ ce->clock_count_per_tick = DIV_ROUND_CLOSEST(rate, HZ);
+ ce->clkevt.irq = irq;
+ ce->clkevt.name = name;
+ ce->clkevt.rating = 200;
+ ce->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ ce->clkevt.cpumask = cpu_possible_mask;
+ ce->clkevt.set_state_shutdown = mps2_timer_shutdown;
+ ce->clkevt.set_state_periodic = mps2_timer_set_periodic;
+ ce->clkevt.set_state_oneshot = mps2_timer_shutdown;
+ ce->clkevt.set_next_event = mps2_timer_set_next_event;
+
+ /* Ensure timer is disabled */
+ writel_relaxed(0, base + TIMER_CTRL);
+
+ ret = request_irq(irq, mps2_timer_interrupt, IRQF_TIMER, name, ce);
+ if (ret) {
+ pr_err("failed to request irq for clockevent: %d\n", ret);
+ goto out_kfree;
+ }
+
+ clockevents_config_and_register(&ce->clkevt, rate, 0xf, 0xffffffff);
+
+ return 0;
+
+out_kfree:
+ kfree(ce);
+out_iounmap:
+ iounmap(base);
+out_clk_disable:
+ /* clk_{disable, unprepare, put}() can handle NULL as a parameter */
+ clk_disable_unprepare(clk);
+out_clk_put:
+ clk_put(clk);
+out:
+ return ret;
+}
+
+static int __init mps2_clocksource_init(struct device_node *np)
+{
+ void __iomem *base;
+ struct clk *clk = NULL;
+ u32 rate;
+ int ret;
+ const char *name = "mps2-clksrc";
+
+ ret = of_property_read_u32(np, "clock-frequency", &rate);
+ if (ret) {
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ pr_err("failed to get clock for clocksource: %d\n", ret);
+ goto out;
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("failed to enable clock for clocksource: %d\n", ret);
+ goto out_clk_put;
+ }
+
+ rate = clk_get_rate(clk);
+ }
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ ret = -EADDRNOTAVAIL;
+ pr_err("failed to map register for clocksource: %d\n", ret);
+ goto out_clk_disable;
+ }
+
+ /* Ensure timer is disabled */
+ writel_relaxed(0, base + TIMER_CTRL);
+
+ /* ... and set it up as free-running clocksource */
+ writel_relaxed(0xffffffff, base + TIMER_VALUE);
+ writel_relaxed(0xffffffff, base + TIMER_RELOAD);
+
+ writel_relaxed(TIMER_CTRL_ENABLE, base + TIMER_CTRL);
+
+ ret = clocksource_mmio_init(base + TIMER_VALUE, name,
+ rate, 200, 32,
+ clocksource_mmio_readl_down);
+ if (ret) {
+ pr_err("failed to init clocksource: %d\n", ret);
+ goto out_iounmap;
+ }
+
+ sched_clock_base = base;
+ sched_clock_register(mps2_sched_read, 32, rate);
+
+ return 0;
+
+out_iounmap:
+ iounmap(base);
+out_clk_disable:
+ /* clk_{disable, unprepare, put}() can handle NULL as a parameter */
+ clk_disable_unprepare(clk);
+out_clk_put:
+ clk_put(clk);
+out:
+ return ret;
+}
+
+static int __init mps2_timer_init(struct device_node *np)
+{
+ static int has_clocksource, has_clockevent;
+ int ret;
+
+ if (!has_clocksource) {
+ ret = mps2_clocksource_init(np);
+ if (!ret) {
+ has_clocksource = 1;
+ return 0;
+ }
+ }
+
+ if (!has_clockevent) {
+ ret = mps2_clockevent_init(np);
+ if (!ret) {
+ has_clockevent = 1;
+ return 0;
+ }
+ }
+
+ return 0;
+}
+
+TIMER_OF_DECLARE(mps2_timer, "arm,mps2-timer", mps2_timer_init);
diff --git a/drivers/clocksource/mxs_timer.c b/drivers/clocksource/mxs_timer.c
new file mode 100644
index 0000000000..e52e12d27d
--- /dev/null
+++ b/drivers/clocksource/mxs_timer.c
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2000-2001 Deep Blue Solutions
+// Copyright (C) 2002 Shane Nay (shane@minirl.com)
+// Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
+// Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+// Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/stmp_device.h>
+#include <linux/sched_clock.h>
+
+/*
+ * There are 2 versions of the timrot on Freescale MXS-based SoCs.
+ * The v1 on MX23 only gets 16 bits counter, while v2 on MX28
+ * extends the counter to 32 bits.
+ *
+ * The implementation uses two timers, one for clock_event and
+ * another for clocksource. MX28 uses timrot 0 and 1, while MX23
+ * uses 0 and 2.
+ */
+
+#define MX23_TIMROT_VERSION_OFFSET 0x0a0
+#define MX28_TIMROT_VERSION_OFFSET 0x120
+#define BP_TIMROT_MAJOR_VERSION 24
+#define BV_TIMROT_VERSION_1 0x01
+#define BV_TIMROT_VERSION_2 0x02
+#define timrot_is_v1() (timrot_major_version == BV_TIMROT_VERSION_1)
+
+/*
+ * There are 4 registers for each timrotv2 instance, and 2 registers
+ * for each timrotv1. So address step 0x40 in macros below strides
+ * one instance of timrotv2 while two instances of timrotv1.
+ *
+ * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1
+ * on MX28 while timrot2 on MX23.
+ */
+/* common between v1 and v2 */
+#define HW_TIMROT_ROTCTRL 0x00
+#define HW_TIMROT_TIMCTRLn(n) (0x20 + (n) * 0x40)
+/* v1 only */
+#define HW_TIMROT_TIMCOUNTn(n) (0x30 + (n) * 0x40)
+/* v2 only */
+#define HW_TIMROT_RUNNING_COUNTn(n) (0x30 + (n) * 0x40)
+#define HW_TIMROT_FIXED_COUNTn(n) (0x40 + (n) * 0x40)
+
+#define BM_TIMROT_TIMCTRLn_RELOAD (1 << 6)
+#define BM_TIMROT_TIMCTRLn_UPDATE (1 << 7)
+#define BM_TIMROT_TIMCTRLn_IRQ_EN (1 << 14)
+#define BM_TIMROT_TIMCTRLn_IRQ (1 << 15)
+#define BP_TIMROT_TIMCTRLn_SELECT 0
+#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8
+#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb
+#define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS 0xf
+
+static struct clock_event_device mxs_clockevent_device;
+
+static void __iomem *mxs_timrot_base;
+static u32 timrot_major_version;
+
+static inline void timrot_irq_disable(void)
+{
+ __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
+ HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
+}
+
+static inline void timrot_irq_enable(void)
+{
+ __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
+ HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_SET);
+}
+
+static void timrot_irq_acknowledge(void)
+{
+ __raw_writel(BM_TIMROT_TIMCTRLn_IRQ, mxs_timrot_base +
+ HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
+}
+
+static u64 timrotv1_get_cycles(struct clocksource *cs)
+{
+ return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1))
+ & 0xffff0000) >> 16);
+}
+
+static int timrotv1_set_next_event(unsigned long evt,
+ struct clock_event_device *dev)
+{
+ /* timrot decrements the count */
+ __raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0));
+
+ return 0;
+}
+
+static int timrotv2_set_next_event(unsigned long evt,
+ struct clock_event_device *dev)
+{
+ /* timrot decrements the count */
+ __raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0));
+
+ return 0;
+}
+
+static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ timrot_irq_acknowledge();
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static void mxs_irq_clear(char *state)
+{
+ /* Disable interrupt in timer module */
+ timrot_irq_disable();
+
+ /* Set event time into the furthest future */
+ if (timrot_is_v1())
+ __raw_writel(0xffff, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
+ else
+ __raw_writel(0xffffffff,
+ mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
+
+ /* Clear pending interrupt */
+ timrot_irq_acknowledge();
+ pr_debug("%s: changing mode to %s\n", __func__, state);
+}
+
+static int mxs_shutdown(struct clock_event_device *evt)
+{
+ mxs_irq_clear("shutdown");
+
+ return 0;
+}
+
+static int mxs_set_oneshot(struct clock_event_device *evt)
+{
+ if (clockevent_state_oneshot(evt))
+ mxs_irq_clear("oneshot");
+ timrot_irq_enable();
+ return 0;
+}
+
+static struct clock_event_device mxs_clockevent_device = {
+ .name = "mxs_timrot",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_shutdown = mxs_shutdown,
+ .set_state_oneshot = mxs_set_oneshot,
+ .tick_resume = mxs_shutdown,
+ .set_next_event = timrotv2_set_next_event,
+ .rating = 200,
+};
+
+static int __init mxs_clockevent_init(struct clk *timer_clk)
+{
+ if (timrot_is_v1())
+ mxs_clockevent_device.set_next_event = timrotv1_set_next_event;
+ mxs_clockevent_device.cpumask = cpumask_of(0);
+ clockevents_config_and_register(&mxs_clockevent_device,
+ clk_get_rate(timer_clk),
+ timrot_is_v1() ? 0xf : 0x2,
+ timrot_is_v1() ? 0xfffe : 0xfffffffe);
+
+ return 0;
+}
+
+static struct clocksource clocksource_mxs = {
+ .name = "mxs_timer",
+ .rating = 200,
+ .read = timrotv1_get_cycles,
+ .mask = CLOCKSOURCE_MASK(16),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static u64 notrace mxs_read_sched_clock_v2(void)
+{
+ return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1));
+}
+
+static int __init mxs_clocksource_init(struct clk *timer_clk)
+{
+ unsigned int c = clk_get_rate(timer_clk);
+
+ if (timrot_is_v1())
+ clocksource_register_hz(&clocksource_mxs, c);
+ else {
+ clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1),
+ "mxs_timer", c, 200, 32, clocksource_mmio_readl_down);
+ sched_clock_register(mxs_read_sched_clock_v2, 32, c);
+ }
+
+ return 0;
+}
+
+static int __init mxs_timer_init(struct device_node *np)
+{
+ struct clk *timer_clk;
+ int irq, ret;
+
+ mxs_timrot_base = of_iomap(np, 0);
+ WARN_ON(!mxs_timrot_base);
+
+ timer_clk = of_clk_get(np, 0);
+ if (IS_ERR(timer_clk)) {
+ pr_err("%s: failed to get clk\n", __func__);
+ return PTR_ERR(timer_clk);
+ }
+
+ ret = clk_prepare_enable(timer_clk);
+ if (ret)
+ return ret;
+
+ /*
+ * Initialize timers to a known state
+ */
+ stmp_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL);
+
+ /* get timrot version */
+ timrot_major_version = __raw_readl(mxs_timrot_base +
+ (of_device_is_compatible(np, "fsl,imx23-timrot") ?
+ MX23_TIMROT_VERSION_OFFSET :
+ MX28_TIMROT_VERSION_OFFSET));
+ timrot_major_version >>= BP_TIMROT_MAJOR_VERSION;
+
+ /* one for clock_event */
+ __raw_writel((timrot_is_v1() ?
+ BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
+ BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
+ BM_TIMROT_TIMCTRLn_UPDATE |
+ BM_TIMROT_TIMCTRLn_IRQ_EN,
+ mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
+
+ /* another for clocksource */
+ __raw_writel((timrot_is_v1() ?
+ BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
+ BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
+ BM_TIMROT_TIMCTRLn_RELOAD,
+ mxs_timrot_base + HW_TIMROT_TIMCTRLn(1));
+
+ /* set clocksource timer fixed count to the maximum */
+ if (timrot_is_v1())
+ __raw_writel(0xffff,
+ mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
+ else
+ __raw_writel(0xffffffff,
+ mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
+
+ /* init and register the timer to the framework */
+ ret = mxs_clocksource_init(timer_clk);
+ if (ret)
+ return ret;
+
+ ret = mxs_clockevent_init(timer_clk);
+ if (ret)
+ return ret;
+
+ /* Make irqs happen */
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq <= 0)
+ return -EINVAL;
+
+ return request_irq(irq, mxs_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+ "MXS Timer Tick", &mxs_clockevent_device);
+}
+TIMER_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init);
diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c
new file mode 100644
index 0000000000..53d0159cc6
--- /dev/null
+++ b/drivers/clocksource/nomadik-mtu.c
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2008 STMicroelectronics
+ * Copyright (C) 2010 Alessandro Rubini
+ * Copyright (C) 2010 Linus Walleij for ST-Ericsson
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/sched_clock.h>
+#include <asm/mach/time.h>
+
+/*
+ * The MTU device hosts four different counters, with 4 set of
+ * registers. These are register names.
+ */
+
+#define MTU_IMSC 0x00 /* Interrupt mask set/clear */
+#define MTU_RIS 0x04 /* Raw interrupt status */
+#define MTU_MIS 0x08 /* Masked interrupt status */
+#define MTU_ICR 0x0C /* Interrupt clear register */
+
+/* per-timer registers take 0..3 as argument */
+#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */
+#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */
+#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */
+#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */
+
+/* bits for the control register */
+#define MTU_CRn_ENA 0x80
+#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */
+#define MTU_CRn_PRESCALE_MASK 0x0c
+#define MTU_CRn_PRESCALE_1 0x00
+#define MTU_CRn_PRESCALE_16 0x04
+#define MTU_CRn_PRESCALE_256 0x08
+#define MTU_CRn_32BITS 0x02
+#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/
+
+/* Other registers are usual amba/primecell registers, currently not used */
+#define MTU_ITCR 0xff0
+#define MTU_ITOP 0xff4
+
+#define MTU_PERIPH_ID0 0xfe0
+#define MTU_PERIPH_ID1 0xfe4
+#define MTU_PERIPH_ID2 0xfe8
+#define MTU_PERIPH_ID3 0xfeC
+
+#define MTU_PCELL0 0xff0
+#define MTU_PCELL1 0xff4
+#define MTU_PCELL2 0xff8
+#define MTU_PCELL3 0xffC
+
+static void __iomem *mtu_base;
+static bool clkevt_periodic;
+static u32 clk_prescale;
+static u32 nmdk_cycle; /* write-once */
+static struct delay_timer mtu_delay_timer;
+
+/*
+ * Override the global weak sched_clock symbol with this
+ * local implementation which uses the clocksource to get some
+ * better resolution when scheduling the kernel.
+ */
+static u64 notrace nomadik_read_sched_clock(void)
+{
+ if (unlikely(!mtu_base))
+ return 0;
+
+ return -readl(mtu_base + MTU_VAL(0));
+}
+
+static unsigned long nmdk_timer_read_current_timer(void)
+{
+ return ~readl_relaxed(mtu_base + MTU_VAL(0));
+}
+
+/* Clockevent device: use one-shot mode */
+static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
+{
+ writel(1 << 1, mtu_base + MTU_IMSC);
+ writel(evt, mtu_base + MTU_LR(1));
+ /* Load highest value, enable device, enable interrupts */
+ writel(MTU_CRn_ONESHOT | clk_prescale |
+ MTU_CRn_32BITS | MTU_CRn_ENA,
+ mtu_base + MTU_CR(1));
+
+ return 0;
+}
+
+static void nmdk_clkevt_reset(void)
+{
+ if (clkevt_periodic) {
+ /* Timer: configure load and background-load, and fire it up */
+ writel(nmdk_cycle, mtu_base + MTU_LR(1));
+ writel(nmdk_cycle, mtu_base + MTU_BGLR(1));
+
+ writel(MTU_CRn_PERIODIC | clk_prescale |
+ MTU_CRn_32BITS | MTU_CRn_ENA,
+ mtu_base + MTU_CR(1));
+ writel(1 << 1, mtu_base + MTU_IMSC);
+ } else {
+ /* Generate an interrupt to start the clockevent again */
+ (void) nmdk_clkevt_next(nmdk_cycle, NULL);
+ }
+}
+
+static int nmdk_clkevt_shutdown(struct clock_event_device *evt)
+{
+ writel(0, mtu_base + MTU_IMSC);
+ /* disable timer */
+ writel(0, mtu_base + MTU_CR(1));
+ /* load some high default value */
+ writel(0xffffffff, mtu_base + MTU_LR(1));
+ return 0;
+}
+
+static int nmdk_clkevt_set_oneshot(struct clock_event_device *evt)
+{
+ clkevt_periodic = false;
+ return 0;
+}
+
+static int nmdk_clkevt_set_periodic(struct clock_event_device *evt)
+{
+ clkevt_periodic = true;
+ nmdk_clkevt_reset();
+ return 0;
+}
+
+static void nmdk_clksrc_reset(void)
+{
+ /* Disable */
+ writel(0, mtu_base + MTU_CR(0));
+
+ /* ClockSource: configure load and background-load, and fire it up */
+ writel(nmdk_cycle, mtu_base + MTU_LR(0));
+ writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
+
+ writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA,
+ mtu_base + MTU_CR(0));
+}
+
+static void nmdk_clkevt_resume(struct clock_event_device *cedev)
+{
+ nmdk_clkevt_reset();
+ nmdk_clksrc_reset();
+}
+
+static struct clock_event_device nmdk_clkevt = {
+ .name = "mtu_1",
+ .features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_DYNIRQ,
+ .rating = 200,
+ .set_state_shutdown = nmdk_clkevt_shutdown,
+ .set_state_periodic = nmdk_clkevt_set_periodic,
+ .set_state_oneshot = nmdk_clkevt_set_oneshot,
+ .set_next_event = nmdk_clkevt_next,
+ .resume = nmdk_clkevt_resume,
+};
+
+/*
+ * IRQ Handler for timer 1 of the MTU block.
+ */
+static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evdev = dev_id;
+
+ writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */
+ evdev->event_handler(evdev);
+ return IRQ_HANDLED;
+}
+
+static int __init nmdk_timer_init(void __iomem *base, int irq,
+ struct clk *pclk, struct clk *clk)
+{
+ unsigned long rate;
+ int ret;
+ int min_ticks;
+
+ mtu_base = base;
+
+ BUG_ON(clk_prepare_enable(pclk));
+ BUG_ON(clk_prepare_enable(clk));
+
+ /*
+ * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
+ * for ux500, and in one specific Ux500 case 32768 Hz.
+ *
+ * Use a divide-by-16 counter if the tick rate is more than 32MHz.
+ * At 32 MHz, the timer (with 32 bit counter) can be programmed
+ * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
+ * with 16 gives too low timer resolution.
+ */
+ rate = clk_get_rate(clk);
+ if (rate > 32000000) {
+ rate /= 16;
+ clk_prescale = MTU_CRn_PRESCALE_16;
+ } else {
+ clk_prescale = MTU_CRn_PRESCALE_1;
+ }
+
+ /* Cycles for periodic mode */
+ nmdk_cycle = DIV_ROUND_CLOSEST(rate, HZ);
+
+
+ /* Timer 0 is the free running clocksource */
+ nmdk_clksrc_reset();
+
+ ret = clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0",
+ rate, 200, 32, clocksource_mmio_readl_down);
+ if (ret) {
+ pr_err("timer: failed to initialize clock source %s\n", "mtu_0");
+ return ret;
+ }
+
+ sched_clock_register(nomadik_read_sched_clock, 32, rate);
+
+ /* Timer 1 is used for events, register irq and clockevents */
+ if (request_irq(irq, nmdk_timer_interrupt, IRQF_TIMER,
+ "Nomadik Timer Tick", &nmdk_clkevt))
+ pr_err("%s: request_irq() failed\n", "Nomadik Timer Tick");
+ nmdk_clkevt.cpumask = cpumask_of(0);
+ nmdk_clkevt.irq = irq;
+ if (rate < 100000)
+ min_ticks = 5;
+ else
+ min_ticks = 2;
+ clockevents_config_and_register(&nmdk_clkevt, rate, min_ticks,
+ 0xffffffffU);
+
+ mtu_delay_timer.read_current_timer = &nmdk_timer_read_current_timer;
+ mtu_delay_timer.freq = rate;
+ register_current_timer_delay(&mtu_delay_timer);
+
+ return 0;
+}
+
+static int __init nmdk_timer_of_init(struct device_node *node)
+{
+ struct clk *pclk;
+ struct clk *clk;
+ void __iomem *base;
+ int irq;
+
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("Can't remap registers\n");
+ return -ENXIO;
+ }
+
+ pclk = of_clk_get_by_name(node, "apb_pclk");
+ if (IS_ERR(pclk)) {
+ pr_err("could not get apb_pclk\n");
+ return PTR_ERR(pclk);
+ }
+
+ clk = of_clk_get_by_name(node, "timclk");
+ if (IS_ERR(clk)) {
+ pr_err("could not get timclk\n");
+ return PTR_ERR(clk);
+ }
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq <= 0) {
+ pr_err("Can't parse IRQ\n");
+ return -EINVAL;
+ }
+
+ return nmdk_timer_init(base, irq, pclk, clk);
+}
+TIMER_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu",
+ nmdk_timer_of_init);
diff --git a/drivers/clocksource/numachip.c b/drivers/clocksource/numachip.c
new file mode 100644
index 0000000000..fdb5fc21fc
--- /dev/null
+++ b/drivers/clocksource/numachip.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2015 Numascale AS. All rights reserved.
+ */
+
+#include <linux/clockchips.h>
+
+#include <asm/irq.h>
+#include <asm/numachip/numachip.h>
+#include <asm/numachip/numachip_csr.h>
+
+static DEFINE_PER_CPU(struct clock_event_device, numachip2_ced);
+
+static cycles_t numachip2_timer_read(struct clocksource *cs)
+{
+ return numachip2_read64_lcsr(NUMACHIP2_TIMER_NOW);
+}
+
+static struct clocksource numachip2_clocksource = {
+ .name = "numachip2",
+ .rating = 295,
+ .read = numachip2_timer_read,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .mult = 1,
+ .shift = 0,
+};
+
+static int numachip2_set_next_event(unsigned long delta, struct clock_event_device *ced)
+{
+ numachip2_write64_lcsr(NUMACHIP2_TIMER_DEADLINE + numachip2_timer(),
+ delta);
+ return 0;
+}
+
+static const struct clock_event_device numachip2_clockevent __initconst = {
+ .name = "numachip2",
+ .rating = 400,
+ .set_next_event = numachip2_set_next_event,
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .mult = 1,
+ .shift = 0,
+ .min_delta_ns = 1250,
+ .min_delta_ticks = 1250,
+ .max_delta_ns = LONG_MAX,
+ .max_delta_ticks = LONG_MAX,
+};
+
+static void numachip_timer_interrupt(void)
+{
+ struct clock_event_device *ced = this_cpu_ptr(&numachip2_ced);
+
+ ced->event_handler(ced);
+}
+
+static __init void numachip_timer_each(struct work_struct *work)
+{
+ unsigned local_apicid = __this_cpu_read(x86_cpu_to_apicid) & 0xff;
+ struct clock_event_device *ced = this_cpu_ptr(&numachip2_ced);
+
+ /* Setup IPI vector to local core and relative timing mode */
+ numachip2_write64_lcsr(NUMACHIP2_TIMER_INT + numachip2_timer(),
+ (3 << 22) | (X86_PLATFORM_IPI_VECTOR << 14) |
+ (local_apicid << 6));
+
+ *ced = numachip2_clockevent;
+ ced->cpumask = cpumask_of(smp_processor_id());
+ clockevents_register_device(ced);
+}
+
+static int __init numachip_timer_init(void)
+{
+ if (numachip_system != 2)
+ return -ENODEV;
+
+ /* Reset timer */
+ numachip2_write64_lcsr(NUMACHIP2_TIMER_RESET, 0);
+ clocksource_register_hz(&numachip2_clocksource, NSEC_PER_SEC);
+
+ /* Setup per-cpu clockevents */
+ x86_platform_ipi_callback = numachip_timer_interrupt;
+ schedule_on_each_cpu(&numachip_timer_each);
+
+ return 0;
+}
+
+arch_initcall(numachip_timer_init);
diff --git a/drivers/clocksource/renesas-ostm.c b/drivers/clocksource/renesas-ostm.c
new file mode 100644
index 0000000000..8da972dc17
--- /dev/null
+++ b/drivers/clocksource/renesas-ostm.c
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas Timer Support - OSTM
+ *
+ * Copyright (C) 2017 Renesas Electronics America, Inc.
+ * Copyright (C) 2017 Chris Brandt
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+#include "timer-of.h"
+
+/*
+ * The OSTM contains independent channels.
+ * The first OSTM channel probed will be set up as a free running
+ * clocksource. Additionally we will use this clocksource for the system
+ * schedule timer sched_clock().
+ *
+ * The second (or more) channel probed will be set up as an interrupt
+ * driven clock event.
+ */
+
+static void __iomem *system_clock; /* For sched_clock() */
+
+/* OSTM REGISTERS */
+#define OSTM_CMP 0x000 /* RW,32 */
+#define OSTM_CNT 0x004 /* R,32 */
+#define OSTM_TE 0x010 /* R,8 */
+#define OSTM_TS 0x014 /* W,8 */
+#define OSTM_TT 0x018 /* W,8 */
+#define OSTM_CTL 0x020 /* RW,8 */
+
+#define TE 0x01
+#define TS 0x01
+#define TT 0x01
+#define CTL_PERIODIC 0x00
+#define CTL_ONESHOT 0x02
+#define CTL_FREERUN 0x02
+
+static void ostm_timer_stop(struct timer_of *to)
+{
+ if (readb(timer_of_base(to) + OSTM_TE) & TE) {
+ writeb(TT, timer_of_base(to) + OSTM_TT);
+
+ /*
+ * Read back the register simply to confirm the write operation
+ * has completed since I/O writes can sometimes get queued by
+ * the bus architecture.
+ */
+ while (readb(timer_of_base(to) + OSTM_TE) & TE)
+ ;
+ }
+}
+
+static int __init ostm_init_clksrc(struct timer_of *to)
+{
+ ostm_timer_stop(to);
+
+ writel(0, timer_of_base(to) + OSTM_CMP);
+ writeb(CTL_FREERUN, timer_of_base(to) + OSTM_CTL);
+ writeb(TS, timer_of_base(to) + OSTM_TS);
+
+ return clocksource_mmio_init(timer_of_base(to) + OSTM_CNT,
+ to->np->full_name, timer_of_rate(to), 300,
+ 32, clocksource_mmio_readl_up);
+}
+
+static u64 notrace ostm_read_sched_clock(void)
+{
+ return readl(system_clock);
+}
+
+static void __init ostm_init_sched_clock(struct timer_of *to)
+{
+ system_clock = timer_of_base(to) + OSTM_CNT;
+ sched_clock_register(ostm_read_sched_clock, 32, timer_of_rate(to));
+}
+
+static int ostm_clock_event_next(unsigned long delta,
+ struct clock_event_device *ced)
+{
+ struct timer_of *to = to_timer_of(ced);
+
+ ostm_timer_stop(to);
+
+ writel(delta, timer_of_base(to) + OSTM_CMP);
+ writeb(CTL_ONESHOT, timer_of_base(to) + OSTM_CTL);
+ writeb(TS, timer_of_base(to) + OSTM_TS);
+
+ return 0;
+}
+
+static int ostm_shutdown(struct clock_event_device *ced)
+{
+ struct timer_of *to = to_timer_of(ced);
+
+ ostm_timer_stop(to);
+
+ return 0;
+}
+static int ostm_set_periodic(struct clock_event_device *ced)
+{
+ struct timer_of *to = to_timer_of(ced);
+
+ if (clockevent_state_oneshot(ced) || clockevent_state_periodic(ced))
+ ostm_timer_stop(to);
+
+ writel(timer_of_period(to) - 1, timer_of_base(to) + OSTM_CMP);
+ writeb(CTL_PERIODIC, timer_of_base(to) + OSTM_CTL);
+ writeb(TS, timer_of_base(to) + OSTM_TS);
+
+ return 0;
+}
+
+static int ostm_set_oneshot(struct clock_event_device *ced)
+{
+ struct timer_of *to = to_timer_of(ced);
+
+ ostm_timer_stop(to);
+
+ return 0;
+}
+
+static irqreturn_t ostm_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *ced = dev_id;
+
+ if (clockevent_state_oneshot(ced))
+ ostm_timer_stop(to_timer_of(ced));
+
+ /* notify clockevent layer */
+ if (ced->event_handler)
+ ced->event_handler(ced);
+
+ return IRQ_HANDLED;
+}
+
+static int __init ostm_init_clkevt(struct timer_of *to)
+{
+ struct clock_event_device *ced = &to->clkevt;
+
+ ced->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC;
+ ced->set_state_shutdown = ostm_shutdown;
+ ced->set_state_periodic = ostm_set_periodic;
+ ced->set_state_oneshot = ostm_set_oneshot;
+ ced->set_next_event = ostm_clock_event_next;
+ ced->shift = 32;
+ ced->rating = 300;
+ ced->cpumask = cpumask_of(0);
+ clockevents_config_and_register(ced, timer_of_rate(to), 0xf,
+ 0xffffffff);
+
+ return 0;
+}
+
+static int __init ostm_init(struct device_node *np)
+{
+ struct reset_control *rstc;
+ struct timer_of *to;
+ int ret;
+
+ to = kzalloc(sizeof(*to), GFP_KERNEL);
+ if (!to)
+ return -ENOMEM;
+
+ rstc = of_reset_control_get_optional_exclusive(np, NULL);
+ if (IS_ERR(rstc)) {
+ ret = PTR_ERR(rstc);
+ goto err_free;
+ }
+
+ reset_control_deassert(rstc);
+
+ to->flags = TIMER_OF_BASE | TIMER_OF_CLOCK;
+ if (system_clock) {
+ /*
+ * clock sources don't use interrupts, clock events do
+ */
+ to->flags |= TIMER_OF_IRQ;
+ to->of_irq.flags = IRQF_TIMER | IRQF_IRQPOLL;
+ to->of_irq.handler = ostm_timer_interrupt;
+ }
+
+ ret = timer_of_init(np, to);
+ if (ret)
+ goto err_reset;
+
+ /*
+ * First probed device will be used as system clocksource. Any
+ * additional devices will be used as clock events.
+ */
+ if (!system_clock) {
+ ret = ostm_init_clksrc(to);
+ if (ret)
+ goto err_cleanup;
+
+ ostm_init_sched_clock(to);
+ pr_info("%pOF: used for clocksource\n", np);
+ } else {
+ ret = ostm_init_clkevt(to);
+ if (ret)
+ goto err_cleanup;
+
+ pr_info("%pOF: used for clock events\n", np);
+ }
+
+ return 0;
+
+err_cleanup:
+ timer_of_cleanup(to);
+err_reset:
+ reset_control_assert(rstc);
+ reset_control_put(rstc);
+err_free:
+ kfree(to);
+ return ret;
+}
+
+TIMER_OF_DECLARE(ostm, "renesas,ostm", ostm_init);
+
+#ifdef CONFIG_ARCH_RZG2L
+static int __init ostm_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ return ostm_init(dev->of_node);
+}
+
+static const struct of_device_id ostm_of_table[] = {
+ { .compatible = "renesas,ostm", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver ostm_device_driver = {
+ .driver = {
+ .name = "renesas_ostm",
+ .of_match_table = of_match_ptr(ostm_of_table),
+ .suppress_bind_attrs = true,
+ },
+};
+builtin_platform_driver_probe(ostm_device_driver, ostm_probe);
+#endif
diff --git a/drivers/clocksource/samsung_pwm_timer.c b/drivers/clocksource/samsung_pwm_timer.c
new file mode 100644
index 0000000000..6e46781bc9
--- /dev/null
+++ b/drivers/clocksource/samsung_pwm_timer.c
@@ -0,0 +1,518 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * samsung - Common hr-timer support (s3c and s5p)
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sched_clock.h>
+
+#include <clocksource/samsung_pwm.h>
+
+/*
+ * Clocksource driver
+ */
+
+#define REG_TCFG0 0x00
+#define REG_TCFG1 0x04
+#define REG_TCON 0x08
+#define REG_TINT_CSTAT 0x44
+
+#define REG_TCNTB(chan) (0x0c + 12 * (chan))
+#define REG_TCMPB(chan) (0x10 + 12 * (chan))
+
+#define TCFG0_PRESCALER_MASK 0xff
+#define TCFG0_PRESCALER1_SHIFT 8
+
+#define TCFG1_SHIFT(x) ((x) * 4)
+#define TCFG1_MUX_MASK 0xf
+
+/*
+ * Each channel occupies 4 bits in TCON register, but there is a gap of 4
+ * bits (one channel) after channel 0, so channels have different numbering
+ * when accessing TCON register.
+ *
+ * In addition, the location of autoreload bit for channel 4 (TCON channel 5)
+ * in its set of bits is 2 as opposed to 3 for other channels.
+ */
+#define TCON_START(chan) (1 << (4 * (chan) + 0))
+#define TCON_MANUALUPDATE(chan) (1 << (4 * (chan) + 1))
+#define TCON_INVERT(chan) (1 << (4 * (chan) + 2))
+#define _TCON_AUTORELOAD(chan) (1 << (4 * (chan) + 3))
+#define _TCON_AUTORELOAD4(chan) (1 << (4 * (chan) + 2))
+#define TCON_AUTORELOAD(chan) \
+ ((chan < 5) ? _TCON_AUTORELOAD(chan) : _TCON_AUTORELOAD4(chan))
+
+DEFINE_SPINLOCK(samsung_pwm_lock);
+EXPORT_SYMBOL(samsung_pwm_lock);
+
+struct samsung_pwm_clocksource {
+ void __iomem *base;
+ const void __iomem *source_reg;
+ unsigned int irq[SAMSUNG_PWM_NUM];
+ struct samsung_pwm_variant variant;
+
+ struct clk *timerclk;
+
+ unsigned int event_id;
+ unsigned int source_id;
+ unsigned int tcnt_max;
+ unsigned int tscaler_div;
+ unsigned int tdiv;
+
+ unsigned long clock_count_per_tick;
+};
+
+static struct samsung_pwm_clocksource pwm;
+
+static void samsung_timer_set_prescale(unsigned int channel, u16 prescale)
+{
+ unsigned long flags;
+ u8 shift = 0;
+ u32 reg;
+
+ if (channel >= 2)
+ shift = TCFG0_PRESCALER1_SHIFT;
+
+ spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+ reg = readl(pwm.base + REG_TCFG0);
+ reg &= ~(TCFG0_PRESCALER_MASK << shift);
+ reg |= (prescale - 1) << shift;
+ writel(reg, pwm.base + REG_TCFG0);
+
+ spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+}
+
+static void samsung_timer_set_divisor(unsigned int channel, u8 divisor)
+{
+ u8 shift = TCFG1_SHIFT(channel);
+ unsigned long flags;
+ u32 reg;
+ u8 bits;
+
+ bits = (fls(divisor) - 1) - pwm.variant.div_base;
+
+ spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+ reg = readl(pwm.base + REG_TCFG1);
+ reg &= ~(TCFG1_MUX_MASK << shift);
+ reg |= bits << shift;
+ writel(reg, pwm.base + REG_TCFG1);
+
+ spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+}
+
+static void samsung_time_stop(unsigned int channel)
+{
+ unsigned long tcon;
+ unsigned long flags;
+
+ if (channel > 0)
+ ++channel;
+
+ spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+ tcon = readl_relaxed(pwm.base + REG_TCON);
+ tcon &= ~TCON_START(channel);
+ writel_relaxed(tcon, pwm.base + REG_TCON);
+
+ spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+}
+
+static void samsung_time_setup(unsigned int channel, unsigned long tcnt)
+{
+ unsigned long tcon;
+ unsigned long flags;
+ unsigned int tcon_chan = channel;
+
+ if (tcon_chan > 0)
+ ++tcon_chan;
+
+ spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+ tcon = readl_relaxed(pwm.base + REG_TCON);
+
+ tcon &= ~(TCON_START(tcon_chan) | TCON_AUTORELOAD(tcon_chan));
+ tcon |= TCON_MANUALUPDATE(tcon_chan);
+
+ writel_relaxed(tcnt, pwm.base + REG_TCNTB(channel));
+ writel_relaxed(tcnt, pwm.base + REG_TCMPB(channel));
+ writel_relaxed(tcon, pwm.base + REG_TCON);
+
+ spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+}
+
+static void samsung_time_start(unsigned int channel, bool periodic)
+{
+ unsigned long tcon;
+ unsigned long flags;
+
+ if (channel > 0)
+ ++channel;
+
+ spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+ tcon = readl_relaxed(pwm.base + REG_TCON);
+
+ tcon &= ~TCON_MANUALUPDATE(channel);
+ tcon |= TCON_START(channel);
+
+ if (periodic)
+ tcon |= TCON_AUTORELOAD(channel);
+ else
+ tcon &= ~TCON_AUTORELOAD(channel);
+
+ writel_relaxed(tcon, pwm.base + REG_TCON);
+
+ spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+}
+
+static int samsung_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ /*
+ * This check is needed to account for internal rounding
+ * errors inside clockevents core, which might result in
+ * passing cycles = 0, which in turn would not generate any
+ * timer interrupt and hang the system.
+ *
+ * Another solution would be to set up the clockevent device
+ * with min_delta = 2, but this would unnecessarily increase
+ * the minimum sleep period.
+ */
+ if (!cycles)
+ cycles = 1;
+
+ samsung_time_setup(pwm.event_id, cycles);
+ samsung_time_start(pwm.event_id, false);
+
+ return 0;
+}
+
+static int samsung_shutdown(struct clock_event_device *evt)
+{
+ samsung_time_stop(pwm.event_id);
+ return 0;
+}
+
+static int samsung_set_periodic(struct clock_event_device *evt)
+{
+ samsung_time_stop(pwm.event_id);
+ samsung_time_setup(pwm.event_id, pwm.clock_count_per_tick - 1);
+ samsung_time_start(pwm.event_id, true);
+ return 0;
+}
+
+static void samsung_clockevent_resume(struct clock_event_device *cev)
+{
+ samsung_timer_set_prescale(pwm.event_id, pwm.tscaler_div);
+ samsung_timer_set_divisor(pwm.event_id, pwm.tdiv);
+
+ if (pwm.variant.has_tint_cstat) {
+ u32 mask = (1 << pwm.event_id);
+
+ writel(mask | (mask << 5), pwm.base + REG_TINT_CSTAT);
+ }
+}
+
+static struct clock_event_device time_event_device = {
+ .name = "samsung_event_timer",
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .set_next_event = samsung_set_next_event,
+ .set_state_shutdown = samsung_shutdown,
+ .set_state_periodic = samsung_set_periodic,
+ .set_state_oneshot = samsung_shutdown,
+ .tick_resume = samsung_shutdown,
+ .resume = samsung_clockevent_resume,
+};
+
+static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ if (pwm.variant.has_tint_cstat) {
+ u32 mask = (1 << pwm.event_id);
+
+ writel(mask | (mask << 5), pwm.base + REG_TINT_CSTAT);
+ }
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static void __init samsung_clockevent_init(void)
+{
+ unsigned long pclk;
+ unsigned long clock_rate;
+ unsigned int irq_number;
+
+ pclk = clk_get_rate(pwm.timerclk);
+
+ samsung_timer_set_prescale(pwm.event_id, pwm.tscaler_div);
+ samsung_timer_set_divisor(pwm.event_id, pwm.tdiv);
+
+ clock_rate = pclk / (pwm.tscaler_div * pwm.tdiv);
+ pwm.clock_count_per_tick = clock_rate / HZ;
+
+ time_event_device.cpumask = cpumask_of(0);
+ clockevents_config_and_register(&time_event_device,
+ clock_rate, 1, pwm.tcnt_max);
+
+ irq_number = pwm.irq[pwm.event_id];
+ if (request_irq(irq_number, samsung_clock_event_isr,
+ IRQF_TIMER | IRQF_IRQPOLL, "samsung_time_irq",
+ &time_event_device))
+ pr_err("%s: request_irq() failed\n", "samsung_time_irq");
+
+ if (pwm.variant.has_tint_cstat) {
+ u32 mask = (1 << pwm.event_id);
+
+ writel(mask | (mask << 5), pwm.base + REG_TINT_CSTAT);
+ }
+}
+
+static void samsung_clocksource_suspend(struct clocksource *cs)
+{
+ samsung_time_stop(pwm.source_id);
+}
+
+static void samsung_clocksource_resume(struct clocksource *cs)
+{
+ samsung_timer_set_prescale(pwm.source_id, pwm.tscaler_div);
+ samsung_timer_set_divisor(pwm.source_id, pwm.tdiv);
+
+ samsung_time_setup(pwm.source_id, pwm.tcnt_max);
+ samsung_time_start(pwm.source_id, true);
+}
+
+static u64 notrace samsung_clocksource_read(struct clocksource *c)
+{
+ return ~readl_relaxed(pwm.source_reg);
+}
+
+static struct clocksource samsung_clocksource = {
+ .name = "samsung_clocksource_timer",
+ .rating = 250,
+ .read = samsung_clocksource_read,
+ .suspend = samsung_clocksource_suspend,
+ .resume = samsung_clocksource_resume,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+ * Override the global weak sched_clock symbol with this
+ * local implementation which uses the clocksource to get some
+ * better resolution when scheduling the kernel. We accept that
+ * this wraps around for now, since it is just a relative time
+ * stamp. (Inspired by U300 implementation.)
+ */
+static u64 notrace samsung_read_sched_clock(void)
+{
+ return samsung_clocksource_read(NULL);
+}
+
+static int __init samsung_clocksource_init(void)
+{
+ unsigned long pclk;
+ unsigned long clock_rate;
+
+ pclk = clk_get_rate(pwm.timerclk);
+
+ samsung_timer_set_prescale(pwm.source_id, pwm.tscaler_div);
+ samsung_timer_set_divisor(pwm.source_id, pwm.tdiv);
+
+ clock_rate = pclk / (pwm.tscaler_div * pwm.tdiv);
+
+ samsung_time_setup(pwm.source_id, pwm.tcnt_max);
+ samsung_time_start(pwm.source_id, true);
+
+ if (pwm.source_id == 4)
+ pwm.source_reg = pwm.base + 0x40;
+ else
+ pwm.source_reg = pwm.base + pwm.source_id * 0x0c + 0x14;
+
+ sched_clock_register(samsung_read_sched_clock,
+ pwm.variant.bits, clock_rate);
+
+ samsung_clocksource.mask = CLOCKSOURCE_MASK(pwm.variant.bits);
+ return clocksource_register_hz(&samsung_clocksource, clock_rate);
+}
+
+static void __init samsung_timer_resources(void)
+{
+ clk_prepare_enable(pwm.timerclk);
+
+ pwm.tcnt_max = (1UL << pwm.variant.bits) - 1;
+ if (pwm.variant.bits == 16) {
+ pwm.tscaler_div = 25;
+ pwm.tdiv = 2;
+ } else {
+ pwm.tscaler_div = 2;
+ pwm.tdiv = 1;
+ }
+}
+
+/*
+ * PWM master driver
+ */
+static int __init _samsung_pwm_clocksource_init(void)
+{
+ u8 mask;
+ int channel;
+
+ mask = ~pwm.variant.output_mask & ((1 << SAMSUNG_PWM_NUM) - 1);
+ channel = fls(mask) - 1;
+ if (channel < 0) {
+ pr_crit("failed to find PWM channel for clocksource\n");
+ return -EINVAL;
+ }
+ pwm.source_id = channel;
+
+ mask &= ~(1 << channel);
+ channel = fls(mask) - 1;
+ if (channel < 0) {
+ pr_crit("failed to find PWM channel for clock event\n");
+ return -EINVAL;
+ }
+ pwm.event_id = channel;
+
+ samsung_timer_resources();
+ samsung_clockevent_init();
+
+ return samsung_clocksource_init();
+}
+
+void __init samsung_pwm_clocksource_init(void __iomem *base,
+ unsigned int *irqs,
+ const struct samsung_pwm_variant *variant)
+{
+ pwm.base = base;
+ memcpy(&pwm.variant, variant, sizeof(pwm.variant));
+ memcpy(pwm.irq, irqs, SAMSUNG_PWM_NUM * sizeof(*irqs));
+
+ pwm.timerclk = clk_get(NULL, "timers");
+ if (IS_ERR(pwm.timerclk))
+ panic("failed to get timers clock for timer");
+
+ _samsung_pwm_clocksource_init();
+}
+
+#ifdef CONFIG_TIMER_OF
+static int __init samsung_pwm_alloc(struct device_node *np,
+ const struct samsung_pwm_variant *variant)
+{
+ struct property *prop;
+ const __be32 *cur;
+ u32 val;
+ int i, ret;
+
+ memcpy(&pwm.variant, variant, sizeof(pwm.variant));
+ for (i = 0; i < SAMSUNG_PWM_NUM; ++i)
+ pwm.irq[i] = irq_of_parse_and_map(np, i);
+
+ of_property_for_each_u32(np, "samsung,pwm-outputs", prop, cur, val) {
+ if (val >= SAMSUNG_PWM_NUM) {
+ pr_warn("%s: invalid channel index in samsung,pwm-outputs property\n", __func__);
+ continue;
+ }
+ pwm.variant.output_mask |= 1 << val;
+ }
+
+ pwm.base = of_iomap(np, 0);
+ if (!pwm.base) {
+ pr_err("%s: failed to map PWM registers\n", __func__);
+ return -ENXIO;
+ }
+
+ pwm.timerclk = of_clk_get_by_name(np, "timers");
+ if (IS_ERR(pwm.timerclk)) {
+ pr_crit("failed to get timers clock for timer\n");
+ ret = PTR_ERR(pwm.timerclk);
+ goto err_clk;
+ }
+
+ ret = _samsung_pwm_clocksource_init();
+ if (ret)
+ goto err_clocksource;
+
+ return 0;
+
+err_clocksource:
+ clk_put(pwm.timerclk);
+ pwm.timerclk = NULL;
+err_clk:
+ iounmap(pwm.base);
+ pwm.base = NULL;
+
+ return ret;
+}
+
+static const struct samsung_pwm_variant s3c24xx_variant = {
+ .bits = 16,
+ .div_base = 1,
+ .has_tint_cstat = false,
+ .tclk_mask = (1 << 4),
+};
+
+static int __init s3c2410_pwm_clocksource_init(struct device_node *np)
+{
+ return samsung_pwm_alloc(np, &s3c24xx_variant);
+}
+TIMER_OF_DECLARE(s3c2410_pwm, "samsung,s3c2410-pwm", s3c2410_pwm_clocksource_init);
+
+static const struct samsung_pwm_variant s3c64xx_variant = {
+ .bits = 32,
+ .div_base = 0,
+ .has_tint_cstat = true,
+ .tclk_mask = (1 << 7) | (1 << 6) | (1 << 5),
+};
+
+static int __init s3c64xx_pwm_clocksource_init(struct device_node *np)
+{
+ return samsung_pwm_alloc(np, &s3c64xx_variant);
+}
+TIMER_OF_DECLARE(s3c6400_pwm, "samsung,s3c6400-pwm", s3c64xx_pwm_clocksource_init);
+
+static const struct samsung_pwm_variant s5p64x0_variant = {
+ .bits = 32,
+ .div_base = 0,
+ .has_tint_cstat = true,
+ .tclk_mask = 0,
+};
+
+static int __init s5p64x0_pwm_clocksource_init(struct device_node *np)
+{
+ return samsung_pwm_alloc(np, &s5p64x0_variant);
+}
+TIMER_OF_DECLARE(s5p6440_pwm, "samsung,s5p6440-pwm", s5p64x0_pwm_clocksource_init);
+
+static const struct samsung_pwm_variant s5p_variant = {
+ .bits = 32,
+ .div_base = 0,
+ .has_tint_cstat = true,
+ .tclk_mask = (1 << 5),
+};
+
+static int __init s5p_pwm_clocksource_init(struct device_node *np)
+{
+ return samsung_pwm_alloc(np, &s5p_variant);
+}
+TIMER_OF_DECLARE(s5pc100_pwm, "samsung,s5pc100-pwm", s5p_pwm_clocksource_init);
+#endif
diff --git a/drivers/clocksource/scx200_hrt.c b/drivers/clocksource/scx200_hrt.c
new file mode 100644
index 0000000000..c3536fffbe
--- /dev/null
+++ b/drivers/clocksource/scx200_hrt.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2006 Jim Cromie
+ *
+ * This is a clocksource driver for the Geode SCx200's 1 or 27 MHz
+ * high-resolution timer. The Geode SC-1100 (at least) has a buggy
+ * time stamp counter (TSC), which loses time unless 'idle=poll' is
+ * given as a boot-arg. In its absence, the Generic Timekeeping code
+ * will detect and de-rate the bad TSC, allowing this timer to take
+ * over timekeeping duties.
+ *
+ * Based on work by John Stultz, and Ted Phelps (in a 2.6.12-rc6 patch)
+ */
+
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/scx200.h>
+
+#define NAME "scx200_hrt"
+
+static int mhz27;
+module_param(mhz27, int, 0); /* load time only */
+MODULE_PARM_DESC(mhz27, "count at 27.0 MHz (default is 1.0 MHz)");
+
+static int ppm;
+module_param(ppm, int, 0); /* load time only */
+MODULE_PARM_DESC(ppm, "+-adjust to actual XO freq (ppm)");
+
+/* HiRes Timer configuration register address */
+#define SCx200_TMCNFG_OFFSET (SCx200_TIMER_OFFSET + 5)
+
+/* and config settings */
+#define HR_TMEN (1 << 0) /* timer interrupt enable */
+#define HR_TMCLKSEL (1 << 1) /* 1|0 counts at 27|1 MHz */
+#define HR_TM27MPD (1 << 2) /* 1 turns off input clock (power-down) */
+
+/* The base timer frequency, * 27 if selected */
+#define HRT_FREQ 1000000
+
+static u64 read_hrt(struct clocksource *cs)
+{
+ /* Read the timer value */
+ return (u64) inl(scx200_cb_base + SCx200_TIMER_OFFSET);
+}
+
+static struct clocksource cs_hrt = {
+ .name = "scx200_hrt",
+ .rating = 250,
+ .read = read_hrt,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ /* mult, shift are set based on mhz27 flag */
+};
+
+static int __init init_hrt_clocksource(void)
+{
+ u32 freq;
+ /* Make sure scx200 has initialized the configuration block */
+ if (!scx200_cb_present())
+ return -ENODEV;
+
+ /* Reserve the timer's ISA io-region for ourselves */
+ if (!request_region(scx200_cb_base + SCx200_TIMER_OFFSET,
+ SCx200_TIMER_SIZE,
+ "NatSemi SCx200 High-Resolution Timer")) {
+ pr_warn("unable to lock timer region\n");
+ return -ENODEV;
+ }
+
+ /* write timer config */
+ outb(HR_TMEN | (mhz27 ? HR_TMCLKSEL : 0),
+ scx200_cb_base + SCx200_TMCNFG_OFFSET);
+
+ freq = (HRT_FREQ + ppm);
+ if (mhz27)
+ freq *= 27;
+
+ pr_info("enabling scx200 high-res timer (%s MHz +%d ppm)\n", mhz27 ? "27":"1", ppm);
+
+ return clocksource_register_hz(&cs_hrt, freq);
+}
+
+module_init(init_hrt_clocksource);
+
+MODULE_AUTHOR("Jim Cromie <jim.cromie@gmail.com>");
+MODULE_DESCRIPTION("clocksource on SCx200 HiRes Timer");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
new file mode 100644
index 0000000000..26919556ef
--- /dev/null
+++ b/drivers/clocksource/sh_cmt.c
@@ -0,0 +1,1175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SuperH Timer Support - CMT
+ *
+ * Copyright (C) 2008 Magnus Damm
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/sh_timer.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#ifdef CONFIG_SUPERH
+#include <asm/platform_early.h>
+#endif
+
+struct sh_cmt_device;
+
+/*
+ * The CMT comes in 5 different identified flavours, depending not only on the
+ * SoC but also on the particular instance. The following table lists the main
+ * characteristics of those flavours.
+ *
+ * 16B 32B 32B-F 48B R-Car Gen2
+ * -----------------------------------------------------------------------------
+ * Channels 2 1/4 1 6 2/8
+ * Control Width 16 16 16 16 32
+ * Counter Width 16 32 32 32/48 32/48
+ * Shared Start/Stop Y Y Y Y N
+ *
+ * The r8a73a4 / R-Car Gen2 version has a per-channel start/stop register
+ * located in the channel registers block. All other versions have a shared
+ * start/stop register located in the global space.
+ *
+ * Channels are indexed from 0 to N-1 in the documentation. The channel index
+ * infers the start/stop bit position in the control register and the channel
+ * registers block address. Some CMT instances have a subset of channels
+ * available, in which case the index in the documentation doesn't match the
+ * "real" index as implemented in hardware. This is for instance the case with
+ * CMT0 on r8a7740, which is a 32-bit variant with a single channel numbered 0
+ * in the documentation but using start/stop bit 5 and having its registers
+ * block at 0x60.
+ *
+ * Similarly CMT0 on r8a73a4, r8a7790 and r8a7791, while implementing 32-bit
+ * channels only, is a 48-bit gen2 CMT with the 48-bit channels unavailable.
+ */
+
+enum sh_cmt_model {
+ SH_CMT_16BIT,
+ SH_CMT_32BIT,
+ SH_CMT_48BIT,
+ SH_CMT0_RCAR_GEN2,
+ SH_CMT1_RCAR_GEN2,
+};
+
+struct sh_cmt_info {
+ enum sh_cmt_model model;
+
+ unsigned int channels_mask;
+
+ unsigned long width; /* 16 or 32 bit version of hardware block */
+ u32 overflow_bit;
+ u32 clear_bits;
+
+ /* callbacks for CMSTR and CMCSR access */
+ u32 (*read_control)(void __iomem *base, unsigned long offs);
+ void (*write_control)(void __iomem *base, unsigned long offs,
+ u32 value);
+
+ /* callbacks for CMCNT and CMCOR access */
+ u32 (*read_count)(void __iomem *base, unsigned long offs);
+ void (*write_count)(void __iomem *base, unsigned long offs, u32 value);
+};
+
+struct sh_cmt_channel {
+ struct sh_cmt_device *cmt;
+
+ unsigned int index; /* Index in the documentation */
+ unsigned int hwidx; /* Real hardware index */
+
+ void __iomem *iostart;
+ void __iomem *ioctrl;
+
+ unsigned int timer_bit;
+ unsigned long flags;
+ u32 match_value;
+ u32 next_match_value;
+ u32 max_match_value;
+ raw_spinlock_t lock;
+ struct clock_event_device ced;
+ struct clocksource cs;
+ u64 total_cycles;
+ bool cs_enabled;
+};
+
+struct sh_cmt_device {
+ struct platform_device *pdev;
+
+ const struct sh_cmt_info *info;
+
+ void __iomem *mapbase;
+ struct clk *clk;
+ unsigned long rate;
+ unsigned int reg_delay;
+
+ raw_spinlock_t lock; /* Protect the shared start/stop register */
+
+ struct sh_cmt_channel *channels;
+ unsigned int num_channels;
+ unsigned int hw_channels;
+
+ bool has_clockevent;
+ bool has_clocksource;
+};
+
+#define SH_CMT16_CMCSR_CMF (1 << 7)
+#define SH_CMT16_CMCSR_CMIE (1 << 6)
+#define SH_CMT16_CMCSR_CKS8 (0 << 0)
+#define SH_CMT16_CMCSR_CKS32 (1 << 0)
+#define SH_CMT16_CMCSR_CKS128 (2 << 0)
+#define SH_CMT16_CMCSR_CKS512 (3 << 0)
+#define SH_CMT16_CMCSR_CKS_MASK (3 << 0)
+
+#define SH_CMT32_CMCSR_CMF (1 << 15)
+#define SH_CMT32_CMCSR_OVF (1 << 14)
+#define SH_CMT32_CMCSR_WRFLG (1 << 13)
+#define SH_CMT32_CMCSR_STTF (1 << 12)
+#define SH_CMT32_CMCSR_STPF (1 << 11)
+#define SH_CMT32_CMCSR_SSIE (1 << 10)
+#define SH_CMT32_CMCSR_CMS (1 << 9)
+#define SH_CMT32_CMCSR_CMM (1 << 8)
+#define SH_CMT32_CMCSR_CMTOUT_IE (1 << 7)
+#define SH_CMT32_CMCSR_CMR_NONE (0 << 4)
+#define SH_CMT32_CMCSR_CMR_DMA (1 << 4)
+#define SH_CMT32_CMCSR_CMR_IRQ (2 << 4)
+#define SH_CMT32_CMCSR_CMR_MASK (3 << 4)
+#define SH_CMT32_CMCSR_DBGIVD (1 << 3)
+#define SH_CMT32_CMCSR_CKS_RCLK8 (4 << 0)
+#define SH_CMT32_CMCSR_CKS_RCLK32 (5 << 0)
+#define SH_CMT32_CMCSR_CKS_RCLK128 (6 << 0)
+#define SH_CMT32_CMCSR_CKS_RCLK1 (7 << 0)
+#define SH_CMT32_CMCSR_CKS_MASK (7 << 0)
+
+static u32 sh_cmt_read16(void __iomem *base, unsigned long offs)
+{
+ return ioread16(base + (offs << 1));
+}
+
+static u32 sh_cmt_read32(void __iomem *base, unsigned long offs)
+{
+ return ioread32(base + (offs << 2));
+}
+
+static void sh_cmt_write16(void __iomem *base, unsigned long offs, u32 value)
+{
+ iowrite16(value, base + (offs << 1));
+}
+
+static void sh_cmt_write32(void __iomem *base, unsigned long offs, u32 value)
+{
+ iowrite32(value, base + (offs << 2));
+}
+
+static const struct sh_cmt_info sh_cmt_info[] = {
+ [SH_CMT_16BIT] = {
+ .model = SH_CMT_16BIT,
+ .width = 16,
+ .overflow_bit = SH_CMT16_CMCSR_CMF,
+ .clear_bits = ~SH_CMT16_CMCSR_CMF,
+ .read_control = sh_cmt_read16,
+ .write_control = sh_cmt_write16,
+ .read_count = sh_cmt_read16,
+ .write_count = sh_cmt_write16,
+ },
+ [SH_CMT_32BIT] = {
+ .model = SH_CMT_32BIT,
+ .width = 32,
+ .overflow_bit = SH_CMT32_CMCSR_CMF,
+ .clear_bits = ~(SH_CMT32_CMCSR_CMF | SH_CMT32_CMCSR_OVF),
+ .read_control = sh_cmt_read16,
+ .write_control = sh_cmt_write16,
+ .read_count = sh_cmt_read32,
+ .write_count = sh_cmt_write32,
+ },
+ [SH_CMT_48BIT] = {
+ .model = SH_CMT_48BIT,
+ .channels_mask = 0x3f,
+ .width = 32,
+ .overflow_bit = SH_CMT32_CMCSR_CMF,
+ .clear_bits = ~(SH_CMT32_CMCSR_CMF | SH_CMT32_CMCSR_OVF),
+ .read_control = sh_cmt_read32,
+ .write_control = sh_cmt_write32,
+ .read_count = sh_cmt_read32,
+ .write_count = sh_cmt_write32,
+ },
+ [SH_CMT0_RCAR_GEN2] = {
+ .model = SH_CMT0_RCAR_GEN2,
+ .channels_mask = 0x60,
+ .width = 32,
+ .overflow_bit = SH_CMT32_CMCSR_CMF,
+ .clear_bits = ~(SH_CMT32_CMCSR_CMF | SH_CMT32_CMCSR_OVF),
+ .read_control = sh_cmt_read32,
+ .write_control = sh_cmt_write32,
+ .read_count = sh_cmt_read32,
+ .write_count = sh_cmt_write32,
+ },
+ [SH_CMT1_RCAR_GEN2] = {
+ .model = SH_CMT1_RCAR_GEN2,
+ .channels_mask = 0xff,
+ .width = 32,
+ .overflow_bit = SH_CMT32_CMCSR_CMF,
+ .clear_bits = ~(SH_CMT32_CMCSR_CMF | SH_CMT32_CMCSR_OVF),
+ .read_control = sh_cmt_read32,
+ .write_control = sh_cmt_write32,
+ .read_count = sh_cmt_read32,
+ .write_count = sh_cmt_write32,
+ },
+};
+
+#define CMCSR 0 /* channel register */
+#define CMCNT 1 /* channel register */
+#define CMCOR 2 /* channel register */
+
+#define CMCLKE 0x1000 /* CLK Enable Register (R-Car Gen2) */
+
+static inline u32 sh_cmt_read_cmstr(struct sh_cmt_channel *ch)
+{
+ if (ch->iostart)
+ return ch->cmt->info->read_control(ch->iostart, 0);
+ else
+ return ch->cmt->info->read_control(ch->cmt->mapbase, 0);
+}
+
+static inline void sh_cmt_write_cmstr(struct sh_cmt_channel *ch, u32 value)
+{
+ u32 old_value = sh_cmt_read_cmstr(ch);
+
+ if (value != old_value) {
+ if (ch->iostart) {
+ ch->cmt->info->write_control(ch->iostart, 0, value);
+ udelay(ch->cmt->reg_delay);
+ } else {
+ ch->cmt->info->write_control(ch->cmt->mapbase, 0, value);
+ udelay(ch->cmt->reg_delay);
+ }
+ }
+}
+
+static inline u32 sh_cmt_read_cmcsr(struct sh_cmt_channel *ch)
+{
+ return ch->cmt->info->read_control(ch->ioctrl, CMCSR);
+}
+
+static inline void sh_cmt_write_cmcsr(struct sh_cmt_channel *ch, u32 value)
+{
+ u32 old_value = sh_cmt_read_cmcsr(ch);
+
+ if (value != old_value) {
+ ch->cmt->info->write_control(ch->ioctrl, CMCSR, value);
+ udelay(ch->cmt->reg_delay);
+ }
+}
+
+static inline u32 sh_cmt_read_cmcnt(struct sh_cmt_channel *ch)
+{
+ return ch->cmt->info->read_count(ch->ioctrl, CMCNT);
+}
+
+static inline int sh_cmt_write_cmcnt(struct sh_cmt_channel *ch, u32 value)
+{
+ /* Tests showed that we need to wait 3 clocks here */
+ unsigned int cmcnt_delay = DIV_ROUND_UP(3 * ch->cmt->reg_delay, 2);
+ u32 reg;
+
+ if (ch->cmt->info->model > SH_CMT_16BIT) {
+ int ret = read_poll_timeout_atomic(sh_cmt_read_cmcsr, reg,
+ !(reg & SH_CMT32_CMCSR_WRFLG),
+ 1, cmcnt_delay, false, ch);
+ if (ret < 0)
+ return ret;
+ }
+
+ ch->cmt->info->write_count(ch->ioctrl, CMCNT, value);
+ udelay(cmcnt_delay);
+ return 0;
+}
+
+static inline void sh_cmt_write_cmcor(struct sh_cmt_channel *ch, u32 value)
+{
+ u32 old_value = ch->cmt->info->read_count(ch->ioctrl, CMCOR);
+
+ if (value != old_value) {
+ ch->cmt->info->write_count(ch->ioctrl, CMCOR, value);
+ udelay(ch->cmt->reg_delay);
+ }
+}
+
+static u32 sh_cmt_get_counter(struct sh_cmt_channel *ch, u32 *has_wrapped)
+{
+ u32 v1, v2, v3;
+ u32 o1, o2;
+
+ o1 = sh_cmt_read_cmcsr(ch) & ch->cmt->info->overflow_bit;
+
+ /* Make sure the timer value is stable. Stolen from acpi_pm.c */
+ do {
+ o2 = o1;
+ v1 = sh_cmt_read_cmcnt(ch);
+ v2 = sh_cmt_read_cmcnt(ch);
+ v3 = sh_cmt_read_cmcnt(ch);
+ o1 = sh_cmt_read_cmcsr(ch) & ch->cmt->info->overflow_bit;
+ } while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3)
+ || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2)));
+
+ *has_wrapped = o1;
+ return v2;
+}
+
+static void sh_cmt_start_stop_ch(struct sh_cmt_channel *ch, int start)
+{
+ unsigned long flags;
+ u32 value;
+
+ /* start stop register shared by multiple timer channels */
+ raw_spin_lock_irqsave(&ch->cmt->lock, flags);
+ value = sh_cmt_read_cmstr(ch);
+
+ if (start)
+ value |= 1 << ch->timer_bit;
+ else
+ value &= ~(1 << ch->timer_bit);
+
+ sh_cmt_write_cmstr(ch, value);
+ raw_spin_unlock_irqrestore(&ch->cmt->lock, flags);
+}
+
+static int sh_cmt_enable(struct sh_cmt_channel *ch)
+{
+ int ret;
+
+ dev_pm_syscore_device(&ch->cmt->pdev->dev, true);
+
+ /* enable clock */
+ ret = clk_enable(ch->cmt->clk);
+ if (ret) {
+ dev_err(&ch->cmt->pdev->dev, "ch%u: cannot enable clock\n",
+ ch->index);
+ goto err0;
+ }
+
+ /* make sure channel is disabled */
+ sh_cmt_start_stop_ch(ch, 0);
+
+ /* configure channel, periodic mode and maximum timeout */
+ if (ch->cmt->info->width == 16) {
+ sh_cmt_write_cmcsr(ch, SH_CMT16_CMCSR_CMIE |
+ SH_CMT16_CMCSR_CKS512);
+ } else {
+ u32 cmtout = ch->cmt->info->model <= SH_CMT_48BIT ?
+ SH_CMT32_CMCSR_CMTOUT_IE : 0;
+ sh_cmt_write_cmcsr(ch, cmtout | SH_CMT32_CMCSR_CMM |
+ SH_CMT32_CMCSR_CMR_IRQ |
+ SH_CMT32_CMCSR_CKS_RCLK8);
+ }
+
+ sh_cmt_write_cmcor(ch, 0xffffffff);
+ ret = sh_cmt_write_cmcnt(ch, 0);
+
+ if (ret || sh_cmt_read_cmcnt(ch)) {
+ dev_err(&ch->cmt->pdev->dev, "ch%u: cannot clear CMCNT\n",
+ ch->index);
+ ret = -ETIMEDOUT;
+ goto err1;
+ }
+
+ /* enable channel */
+ sh_cmt_start_stop_ch(ch, 1);
+ return 0;
+ err1:
+ /* stop clock */
+ clk_disable(ch->cmt->clk);
+
+ err0:
+ return ret;
+}
+
+static void sh_cmt_disable(struct sh_cmt_channel *ch)
+{
+ /* disable channel */
+ sh_cmt_start_stop_ch(ch, 0);
+
+ /* disable interrupts in CMT block */
+ sh_cmt_write_cmcsr(ch, 0);
+
+ /* stop clock */
+ clk_disable(ch->cmt->clk);
+
+ dev_pm_syscore_device(&ch->cmt->pdev->dev, false);
+}
+
+/* private flags */
+#define FLAG_CLOCKEVENT (1 << 0)
+#define FLAG_CLOCKSOURCE (1 << 1)
+#define FLAG_REPROGRAM (1 << 2)
+#define FLAG_SKIPEVENT (1 << 3)
+#define FLAG_IRQCONTEXT (1 << 4)
+
+static void sh_cmt_clock_event_program_verify(struct sh_cmt_channel *ch,
+ int absolute)
+{
+ u32 value = ch->next_match_value;
+ u32 new_match;
+ u32 delay = 0;
+ u32 now = 0;
+ u32 has_wrapped;
+
+ now = sh_cmt_get_counter(ch, &has_wrapped);
+ ch->flags |= FLAG_REPROGRAM; /* force reprogram */
+
+ if (has_wrapped) {
+ /* we're competing with the interrupt handler.
+ * -> let the interrupt handler reprogram the timer.
+ * -> interrupt number two handles the event.
+ */
+ ch->flags |= FLAG_SKIPEVENT;
+ return;
+ }
+
+ if (absolute)
+ now = 0;
+
+ do {
+ /* reprogram the timer hardware,
+ * but don't save the new match value yet.
+ */
+ new_match = now + value + delay;
+ if (new_match > ch->max_match_value)
+ new_match = ch->max_match_value;
+
+ sh_cmt_write_cmcor(ch, new_match);
+
+ now = sh_cmt_get_counter(ch, &has_wrapped);
+ if (has_wrapped && (new_match > ch->match_value)) {
+ /* we are changing to a greater match value,
+ * so this wrap must be caused by the counter
+ * matching the old value.
+ * -> first interrupt reprograms the timer.
+ * -> interrupt number two handles the event.
+ */
+ ch->flags |= FLAG_SKIPEVENT;
+ break;
+ }
+
+ if (has_wrapped) {
+ /* we are changing to a smaller match value,
+ * so the wrap must be caused by the counter
+ * matching the new value.
+ * -> save programmed match value.
+ * -> let isr handle the event.
+ */
+ ch->match_value = new_match;
+ break;
+ }
+
+ /* be safe: verify hardware settings */
+ if (now < new_match) {
+ /* timer value is below match value, all good.
+ * this makes sure we won't miss any match events.
+ * -> save programmed match value.
+ * -> let isr handle the event.
+ */
+ ch->match_value = new_match;
+ break;
+ }
+
+ /* the counter has reached a value greater
+ * than our new match value. and since the
+ * has_wrapped flag isn't set we must have
+ * programmed a too close event.
+ * -> increase delay and retry.
+ */
+ if (delay)
+ delay <<= 1;
+ else
+ delay = 1;
+
+ if (!delay)
+ dev_warn(&ch->cmt->pdev->dev, "ch%u: too long delay\n",
+ ch->index);
+
+ } while (delay);
+}
+
+static void __sh_cmt_set_next(struct sh_cmt_channel *ch, unsigned long delta)
+{
+ if (delta > ch->max_match_value)
+ dev_warn(&ch->cmt->pdev->dev, "ch%u: delta out of range\n",
+ ch->index);
+
+ ch->next_match_value = delta;
+ sh_cmt_clock_event_program_verify(ch, 0);
+}
+
+static void sh_cmt_set_next(struct sh_cmt_channel *ch, unsigned long delta)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&ch->lock, flags);
+ __sh_cmt_set_next(ch, delta);
+ raw_spin_unlock_irqrestore(&ch->lock, flags);
+}
+
+static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id)
+{
+ struct sh_cmt_channel *ch = dev_id;
+
+ /* clear flags */
+ sh_cmt_write_cmcsr(ch, sh_cmt_read_cmcsr(ch) &
+ ch->cmt->info->clear_bits);
+
+ /* update clock source counter to begin with if enabled
+ * the wrap flag should be cleared by the timer specific
+ * isr before we end up here.
+ */
+ if (ch->flags & FLAG_CLOCKSOURCE)
+ ch->total_cycles += ch->match_value + 1;
+
+ if (!(ch->flags & FLAG_REPROGRAM))
+ ch->next_match_value = ch->max_match_value;
+
+ ch->flags |= FLAG_IRQCONTEXT;
+
+ if (ch->flags & FLAG_CLOCKEVENT) {
+ if (!(ch->flags & FLAG_SKIPEVENT)) {
+ if (clockevent_state_oneshot(&ch->ced)) {
+ ch->next_match_value = ch->max_match_value;
+ ch->flags |= FLAG_REPROGRAM;
+ }
+
+ ch->ced.event_handler(&ch->ced);
+ }
+ }
+
+ ch->flags &= ~FLAG_SKIPEVENT;
+
+ if (ch->flags & FLAG_REPROGRAM) {
+ ch->flags &= ~FLAG_REPROGRAM;
+ sh_cmt_clock_event_program_verify(ch, 1);
+
+ if (ch->flags & FLAG_CLOCKEVENT)
+ if ((clockevent_state_shutdown(&ch->ced))
+ || (ch->match_value == ch->next_match_value))
+ ch->flags &= ~FLAG_REPROGRAM;
+ }
+
+ ch->flags &= ~FLAG_IRQCONTEXT;
+
+ return IRQ_HANDLED;
+}
+
+static int sh_cmt_start(struct sh_cmt_channel *ch, unsigned long flag)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ if (flag & FLAG_CLOCKSOURCE)
+ pm_runtime_get_sync(&ch->cmt->pdev->dev);
+
+ raw_spin_lock_irqsave(&ch->lock, flags);
+
+ if (!(ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE))) {
+ if (flag & FLAG_CLOCKEVENT)
+ pm_runtime_get_sync(&ch->cmt->pdev->dev);
+ ret = sh_cmt_enable(ch);
+ }
+
+ if (ret)
+ goto out;
+ ch->flags |= flag;
+
+ /* setup timeout if no clockevent */
+ if (ch->cmt->num_channels == 1 &&
+ flag == FLAG_CLOCKSOURCE && (!(ch->flags & FLAG_CLOCKEVENT)))
+ __sh_cmt_set_next(ch, ch->max_match_value);
+ out:
+ raw_spin_unlock_irqrestore(&ch->lock, flags);
+
+ return ret;
+}
+
+static void sh_cmt_stop(struct sh_cmt_channel *ch, unsigned long flag)
+{
+ unsigned long flags;
+ unsigned long f;
+
+ raw_spin_lock_irqsave(&ch->lock, flags);
+
+ f = ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE);
+ ch->flags &= ~flag;
+
+ if (f && !(ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE))) {
+ sh_cmt_disable(ch);
+ if (flag & FLAG_CLOCKEVENT)
+ pm_runtime_put(&ch->cmt->pdev->dev);
+ }
+
+ /* adjust the timeout to maximum if only clocksource left */
+ if ((flag == FLAG_CLOCKEVENT) && (ch->flags & FLAG_CLOCKSOURCE))
+ __sh_cmt_set_next(ch, ch->max_match_value);
+
+ raw_spin_unlock_irqrestore(&ch->lock, flags);
+
+ if (flag & FLAG_CLOCKSOURCE)
+ pm_runtime_put(&ch->cmt->pdev->dev);
+}
+
+static struct sh_cmt_channel *cs_to_sh_cmt(struct clocksource *cs)
+{
+ return container_of(cs, struct sh_cmt_channel, cs);
+}
+
+static u64 sh_cmt_clocksource_read(struct clocksource *cs)
+{
+ struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
+ u32 has_wrapped;
+
+ if (ch->cmt->num_channels == 1) {
+ unsigned long flags;
+ u64 value;
+ u32 raw;
+
+ raw_spin_lock_irqsave(&ch->lock, flags);
+ value = ch->total_cycles;
+ raw = sh_cmt_get_counter(ch, &has_wrapped);
+
+ if (unlikely(has_wrapped))
+ raw += ch->match_value + 1;
+ raw_spin_unlock_irqrestore(&ch->lock, flags);
+
+ return value + raw;
+ }
+
+ return sh_cmt_get_counter(ch, &has_wrapped);
+}
+
+static int sh_cmt_clocksource_enable(struct clocksource *cs)
+{
+ int ret;
+ struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
+
+ WARN_ON(ch->cs_enabled);
+
+ ch->total_cycles = 0;
+
+ ret = sh_cmt_start(ch, FLAG_CLOCKSOURCE);
+ if (!ret)
+ ch->cs_enabled = true;
+
+ return ret;
+}
+
+static void sh_cmt_clocksource_disable(struct clocksource *cs)
+{
+ struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
+
+ WARN_ON(!ch->cs_enabled);
+
+ sh_cmt_stop(ch, FLAG_CLOCKSOURCE);
+ ch->cs_enabled = false;
+}
+
+static void sh_cmt_clocksource_suspend(struct clocksource *cs)
+{
+ struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
+
+ if (!ch->cs_enabled)
+ return;
+
+ sh_cmt_stop(ch, FLAG_CLOCKSOURCE);
+ dev_pm_genpd_suspend(&ch->cmt->pdev->dev);
+}
+
+static void sh_cmt_clocksource_resume(struct clocksource *cs)
+{
+ struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
+
+ if (!ch->cs_enabled)
+ return;
+
+ dev_pm_genpd_resume(&ch->cmt->pdev->dev);
+ sh_cmt_start(ch, FLAG_CLOCKSOURCE);
+}
+
+static int sh_cmt_register_clocksource(struct sh_cmt_channel *ch,
+ const char *name)
+{
+ struct clocksource *cs = &ch->cs;
+
+ cs->name = name;
+ cs->rating = 125;
+ cs->read = sh_cmt_clocksource_read;
+ cs->enable = sh_cmt_clocksource_enable;
+ cs->disable = sh_cmt_clocksource_disable;
+ cs->suspend = sh_cmt_clocksource_suspend;
+ cs->resume = sh_cmt_clocksource_resume;
+ cs->mask = CLOCKSOURCE_MASK(ch->cmt->info->width);
+ cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ dev_info(&ch->cmt->pdev->dev, "ch%u: used as clock source\n",
+ ch->index);
+
+ clocksource_register_hz(cs, ch->cmt->rate);
+ return 0;
+}
+
+static struct sh_cmt_channel *ced_to_sh_cmt(struct clock_event_device *ced)
+{
+ return container_of(ced, struct sh_cmt_channel, ced);
+}
+
+static void sh_cmt_clock_event_start(struct sh_cmt_channel *ch, int periodic)
+{
+ sh_cmt_start(ch, FLAG_CLOCKEVENT);
+
+ if (periodic)
+ sh_cmt_set_next(ch, ((ch->cmt->rate + HZ/2) / HZ) - 1);
+ else
+ sh_cmt_set_next(ch, ch->max_match_value);
+}
+
+static int sh_cmt_clock_event_shutdown(struct clock_event_device *ced)
+{
+ struct sh_cmt_channel *ch = ced_to_sh_cmt(ced);
+
+ sh_cmt_stop(ch, FLAG_CLOCKEVENT);
+ return 0;
+}
+
+static int sh_cmt_clock_event_set_state(struct clock_event_device *ced,
+ int periodic)
+{
+ struct sh_cmt_channel *ch = ced_to_sh_cmt(ced);
+
+ /* deal with old setting first */
+ if (clockevent_state_oneshot(ced) || clockevent_state_periodic(ced))
+ sh_cmt_stop(ch, FLAG_CLOCKEVENT);
+
+ dev_info(&ch->cmt->pdev->dev, "ch%u: used for %s clock events\n",
+ ch->index, periodic ? "periodic" : "oneshot");
+ sh_cmt_clock_event_start(ch, periodic);
+ return 0;
+}
+
+static int sh_cmt_clock_event_set_oneshot(struct clock_event_device *ced)
+{
+ return sh_cmt_clock_event_set_state(ced, 0);
+}
+
+static int sh_cmt_clock_event_set_periodic(struct clock_event_device *ced)
+{
+ return sh_cmt_clock_event_set_state(ced, 1);
+}
+
+static int sh_cmt_clock_event_next(unsigned long delta,
+ struct clock_event_device *ced)
+{
+ struct sh_cmt_channel *ch = ced_to_sh_cmt(ced);
+
+ BUG_ON(!clockevent_state_oneshot(ced));
+ if (likely(ch->flags & FLAG_IRQCONTEXT))
+ ch->next_match_value = delta - 1;
+ else
+ sh_cmt_set_next(ch, delta - 1);
+
+ return 0;
+}
+
+static void sh_cmt_clock_event_suspend(struct clock_event_device *ced)
+{
+ struct sh_cmt_channel *ch = ced_to_sh_cmt(ced);
+
+ dev_pm_genpd_suspend(&ch->cmt->pdev->dev);
+ clk_unprepare(ch->cmt->clk);
+}
+
+static void sh_cmt_clock_event_resume(struct clock_event_device *ced)
+{
+ struct sh_cmt_channel *ch = ced_to_sh_cmt(ced);
+
+ clk_prepare(ch->cmt->clk);
+ dev_pm_genpd_resume(&ch->cmt->pdev->dev);
+}
+
+static int sh_cmt_register_clockevent(struct sh_cmt_channel *ch,
+ const char *name)
+{
+ struct clock_event_device *ced = &ch->ced;
+ int irq;
+ int ret;
+
+ irq = platform_get_irq(ch->cmt->pdev, ch->index);
+ if (irq < 0)
+ return irq;
+
+ ret = request_irq(irq, sh_cmt_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
+ dev_name(&ch->cmt->pdev->dev), ch);
+ if (ret) {
+ dev_err(&ch->cmt->pdev->dev, "ch%u: failed to request irq %d\n",
+ ch->index, irq);
+ return ret;
+ }
+
+ ced->name = name;
+ ced->features = CLOCK_EVT_FEAT_PERIODIC;
+ ced->features |= CLOCK_EVT_FEAT_ONESHOT;
+ ced->rating = 125;
+ ced->cpumask = cpu_possible_mask;
+ ced->set_next_event = sh_cmt_clock_event_next;
+ ced->set_state_shutdown = sh_cmt_clock_event_shutdown;
+ ced->set_state_periodic = sh_cmt_clock_event_set_periodic;
+ ced->set_state_oneshot = sh_cmt_clock_event_set_oneshot;
+ ced->suspend = sh_cmt_clock_event_suspend;
+ ced->resume = sh_cmt_clock_event_resume;
+
+ /* TODO: calculate good shift from rate and counter bit width */
+ ced->shift = 32;
+ ced->mult = div_sc(ch->cmt->rate, NSEC_PER_SEC, ced->shift);
+ ced->max_delta_ns = clockevent_delta2ns(ch->max_match_value, ced);
+ ced->max_delta_ticks = ch->max_match_value;
+ ced->min_delta_ns = clockevent_delta2ns(0x1f, ced);
+ ced->min_delta_ticks = 0x1f;
+
+ dev_info(&ch->cmt->pdev->dev, "ch%u: used for clock events\n",
+ ch->index);
+ clockevents_register_device(ced);
+
+ return 0;
+}
+
+static int sh_cmt_register(struct sh_cmt_channel *ch, const char *name,
+ bool clockevent, bool clocksource)
+{
+ int ret;
+
+ if (clockevent) {
+ ch->cmt->has_clockevent = true;
+ ret = sh_cmt_register_clockevent(ch, name);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (clocksource) {
+ ch->cmt->has_clocksource = true;
+ sh_cmt_register_clocksource(ch, name);
+ }
+
+ return 0;
+}
+
+static int sh_cmt_setup_channel(struct sh_cmt_channel *ch, unsigned int index,
+ unsigned int hwidx, bool clockevent,
+ bool clocksource, struct sh_cmt_device *cmt)
+{
+ u32 value;
+ int ret;
+
+ /* Skip unused channels. */
+ if (!clockevent && !clocksource)
+ return 0;
+
+ ch->cmt = cmt;
+ ch->index = index;
+ ch->hwidx = hwidx;
+ ch->timer_bit = hwidx;
+
+ /*
+ * Compute the address of the channel control register block. For the
+ * timers with a per-channel start/stop register, compute its address
+ * as well.
+ */
+ switch (cmt->info->model) {
+ case SH_CMT_16BIT:
+ ch->ioctrl = cmt->mapbase + 2 + ch->hwidx * 6;
+ break;
+ case SH_CMT_32BIT:
+ case SH_CMT_48BIT:
+ ch->ioctrl = cmt->mapbase + 0x10 + ch->hwidx * 0x10;
+ break;
+ case SH_CMT0_RCAR_GEN2:
+ case SH_CMT1_RCAR_GEN2:
+ ch->iostart = cmt->mapbase + ch->hwidx * 0x100;
+ ch->ioctrl = ch->iostart + 0x10;
+ ch->timer_bit = 0;
+
+ /* Enable the clock supply to the channel */
+ value = ioread32(cmt->mapbase + CMCLKE);
+ value |= BIT(hwidx);
+ iowrite32(value, cmt->mapbase + CMCLKE);
+ break;
+ }
+
+ if (cmt->info->width == (sizeof(ch->max_match_value) * 8))
+ ch->max_match_value = ~0;
+ else
+ ch->max_match_value = (1 << cmt->info->width) - 1;
+
+ ch->match_value = ch->max_match_value;
+ raw_spin_lock_init(&ch->lock);
+
+ ret = sh_cmt_register(ch, dev_name(&cmt->pdev->dev),
+ clockevent, clocksource);
+ if (ret) {
+ dev_err(&cmt->pdev->dev, "ch%u: registration failed\n",
+ ch->index);
+ return ret;
+ }
+ ch->cs_enabled = false;
+
+ return 0;
+}
+
+static int sh_cmt_map_memory(struct sh_cmt_device *cmt)
+{
+ struct resource *mem;
+
+ mem = platform_get_resource(cmt->pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&cmt->pdev->dev, "failed to get I/O memory\n");
+ return -ENXIO;
+ }
+
+ cmt->mapbase = ioremap(mem->start, resource_size(mem));
+ if (cmt->mapbase == NULL) {
+ dev_err(&cmt->pdev->dev, "failed to remap I/O memory\n");
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id sh_cmt_id_table[] = {
+ { "sh-cmt-16", (kernel_ulong_t)&sh_cmt_info[SH_CMT_16BIT] },
+ { "sh-cmt-32", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT] },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, sh_cmt_id_table);
+
+static const struct of_device_id sh_cmt_of_table[] __maybe_unused = {
+ {
+ /* deprecated, preserved for backward compatibility */
+ .compatible = "renesas,cmt-48",
+ .data = &sh_cmt_info[SH_CMT_48BIT]
+ },
+ {
+ /* deprecated, preserved for backward compatibility */
+ .compatible = "renesas,cmt-48-gen2",
+ .data = &sh_cmt_info[SH_CMT0_RCAR_GEN2]
+ },
+ {
+ .compatible = "renesas,r8a7740-cmt1",
+ .data = &sh_cmt_info[SH_CMT_48BIT]
+ },
+ {
+ .compatible = "renesas,sh73a0-cmt1",
+ .data = &sh_cmt_info[SH_CMT_48BIT]
+ },
+ {
+ .compatible = "renesas,rcar-gen2-cmt0",
+ .data = &sh_cmt_info[SH_CMT0_RCAR_GEN2]
+ },
+ {
+ .compatible = "renesas,rcar-gen2-cmt1",
+ .data = &sh_cmt_info[SH_CMT1_RCAR_GEN2]
+ },
+ {
+ .compatible = "renesas,rcar-gen3-cmt0",
+ .data = &sh_cmt_info[SH_CMT0_RCAR_GEN2]
+ },
+ {
+ .compatible = "renesas,rcar-gen3-cmt1",
+ .data = &sh_cmt_info[SH_CMT1_RCAR_GEN2]
+ },
+ {
+ .compatible = "renesas,rcar-gen4-cmt0",
+ .data = &sh_cmt_info[SH_CMT0_RCAR_GEN2]
+ },
+ {
+ .compatible = "renesas,rcar-gen4-cmt1",
+ .data = &sh_cmt_info[SH_CMT1_RCAR_GEN2]
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sh_cmt_of_table);
+
+static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)
+{
+ unsigned int mask, i;
+ unsigned long rate;
+ int ret;
+
+ cmt->pdev = pdev;
+ raw_spin_lock_init(&cmt->lock);
+
+ if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+ cmt->info = of_device_get_match_data(&pdev->dev);
+ cmt->hw_channels = cmt->info->channels_mask;
+ } else if (pdev->dev.platform_data) {
+ struct sh_timer_config *cfg = pdev->dev.platform_data;
+ const struct platform_device_id *id = pdev->id_entry;
+
+ cmt->info = (const struct sh_cmt_info *)id->driver_data;
+ cmt->hw_channels = cfg->channels_mask;
+ } else {
+ dev_err(&cmt->pdev->dev, "missing platform data\n");
+ return -ENXIO;
+ }
+
+ /* Get hold of clock. */
+ cmt->clk = clk_get(&cmt->pdev->dev, "fck");
+ if (IS_ERR(cmt->clk)) {
+ dev_err(&cmt->pdev->dev, "cannot get clock\n");
+ return PTR_ERR(cmt->clk);
+ }
+
+ ret = clk_prepare(cmt->clk);
+ if (ret < 0)
+ goto err_clk_put;
+
+ /* Determine clock rate. */
+ ret = clk_enable(cmt->clk);
+ if (ret < 0)
+ goto err_clk_unprepare;
+
+ rate = clk_get_rate(cmt->clk);
+ if (!rate) {
+ ret = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ /* We shall wait 2 input clks after register writes */
+ if (cmt->info->model >= SH_CMT_48BIT)
+ cmt->reg_delay = DIV_ROUND_UP(2UL * USEC_PER_SEC, rate);
+ cmt->rate = rate / (cmt->info->width == 16 ? 512 : 8);
+
+ /* Map the memory resource(s). */
+ ret = sh_cmt_map_memory(cmt);
+ if (ret < 0)
+ goto err_clk_disable;
+
+ /* Allocate and setup the channels. */
+ cmt->num_channels = hweight8(cmt->hw_channels);
+ cmt->channels = kcalloc(cmt->num_channels, sizeof(*cmt->channels),
+ GFP_KERNEL);
+ if (cmt->channels == NULL) {
+ ret = -ENOMEM;
+ goto err_unmap;
+ }
+
+ /*
+ * Use the first channel as a clock event device and the second channel
+ * as a clock source. If only one channel is available use it for both.
+ */
+ for (i = 0, mask = cmt->hw_channels; i < cmt->num_channels; ++i) {
+ unsigned int hwidx = ffs(mask) - 1;
+ bool clocksource = i == 1 || cmt->num_channels == 1;
+ bool clockevent = i == 0;
+
+ ret = sh_cmt_setup_channel(&cmt->channels[i], i, hwidx,
+ clockevent, clocksource, cmt);
+ if (ret < 0)
+ goto err_unmap;
+
+ mask &= ~(1 << hwidx);
+ }
+
+ clk_disable(cmt->clk);
+
+ platform_set_drvdata(pdev, cmt);
+
+ return 0;
+
+err_unmap:
+ kfree(cmt->channels);
+ iounmap(cmt->mapbase);
+err_clk_disable:
+ clk_disable(cmt->clk);
+err_clk_unprepare:
+ clk_unprepare(cmt->clk);
+err_clk_put:
+ clk_put(cmt->clk);
+ return ret;
+}
+
+static int sh_cmt_probe(struct platform_device *pdev)
+{
+ struct sh_cmt_device *cmt = platform_get_drvdata(pdev);
+ int ret;
+
+ if (!is_sh_early_platform_device(pdev)) {
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ }
+
+ if (cmt) {
+ dev_info(&pdev->dev, "kept as earlytimer\n");
+ goto out;
+ }
+
+ cmt = kzalloc(sizeof(*cmt), GFP_KERNEL);
+ if (cmt == NULL)
+ return -ENOMEM;
+
+ ret = sh_cmt_setup(cmt, pdev);
+ if (ret) {
+ kfree(cmt);
+ pm_runtime_idle(&pdev->dev);
+ return ret;
+ }
+ if (is_sh_early_platform_device(pdev))
+ return 0;
+
+ out:
+ if (cmt->has_clockevent || cmt->has_clocksource)
+ pm_runtime_irq_safe(&pdev->dev);
+ else
+ pm_runtime_idle(&pdev->dev);
+
+ return 0;
+}
+
+static struct platform_driver sh_cmt_device_driver = {
+ .probe = sh_cmt_probe,
+ .driver = {
+ .name = "sh_cmt",
+ .of_match_table = of_match_ptr(sh_cmt_of_table),
+ .suppress_bind_attrs = true,
+ },
+ .id_table = sh_cmt_id_table,
+};
+
+static int __init sh_cmt_init(void)
+{
+ return platform_driver_register(&sh_cmt_device_driver);
+}
+
+static void __exit sh_cmt_exit(void)
+{
+ platform_driver_unregister(&sh_cmt_device_driver);
+}
+
+#ifdef CONFIG_SUPERH
+sh_early_platform_init("earlytimer", &sh_cmt_device_driver);
+#endif
+
+subsys_initcall(sh_cmt_init);
+module_exit(sh_cmt_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("SuperH CMT Timer Driver");
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
new file mode 100644
index 0000000000..34872df545
--- /dev/null
+++ b/drivers/clocksource/sh_mtu2.c
@@ -0,0 +1,527 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SuperH Timer Support - MTU2
+ *
+ * Copyright (C) 2009 Magnus Damm
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/sh_timer.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#ifdef CONFIG_SUPERH
+#include <asm/platform_early.h>
+#endif
+
+struct sh_mtu2_device;
+
+struct sh_mtu2_channel {
+ struct sh_mtu2_device *mtu;
+ unsigned int index;
+
+ void __iomem *base;
+
+ struct clock_event_device ced;
+};
+
+struct sh_mtu2_device {
+ struct platform_device *pdev;
+
+ void __iomem *mapbase;
+ struct clk *clk;
+
+ raw_spinlock_t lock; /* Protect the shared registers */
+
+ struct sh_mtu2_channel *channels;
+ unsigned int num_channels;
+
+ bool has_clockevent;
+};
+
+#define TSTR -1 /* shared register */
+#define TCR 0 /* channel register */
+#define TMDR 1 /* channel register */
+#define TIOR 2 /* channel register */
+#define TIER 3 /* channel register */
+#define TSR 4 /* channel register */
+#define TCNT 5 /* channel register */
+#define TGR 6 /* channel register */
+
+#define TCR_CCLR_NONE (0 << 5)
+#define TCR_CCLR_TGRA (1 << 5)
+#define TCR_CCLR_TGRB (2 << 5)
+#define TCR_CCLR_SYNC (3 << 5)
+#define TCR_CCLR_TGRC (5 << 5)
+#define TCR_CCLR_TGRD (6 << 5)
+#define TCR_CCLR_MASK (7 << 5)
+#define TCR_CKEG_RISING (0 << 3)
+#define TCR_CKEG_FALLING (1 << 3)
+#define TCR_CKEG_BOTH (2 << 3)
+#define TCR_CKEG_MASK (3 << 3)
+/* Values 4 to 7 are channel-dependent */
+#define TCR_TPSC_P1 (0 << 0)
+#define TCR_TPSC_P4 (1 << 0)
+#define TCR_TPSC_P16 (2 << 0)
+#define TCR_TPSC_P64 (3 << 0)
+#define TCR_TPSC_CH0_TCLKA (4 << 0)
+#define TCR_TPSC_CH0_TCLKB (5 << 0)
+#define TCR_TPSC_CH0_TCLKC (6 << 0)
+#define TCR_TPSC_CH0_TCLKD (7 << 0)
+#define TCR_TPSC_CH1_TCLKA (4 << 0)
+#define TCR_TPSC_CH1_TCLKB (5 << 0)
+#define TCR_TPSC_CH1_P256 (6 << 0)
+#define TCR_TPSC_CH1_TCNT2 (7 << 0)
+#define TCR_TPSC_CH2_TCLKA (4 << 0)
+#define TCR_TPSC_CH2_TCLKB (5 << 0)
+#define TCR_TPSC_CH2_TCLKC (6 << 0)
+#define TCR_TPSC_CH2_P1024 (7 << 0)
+#define TCR_TPSC_CH34_P256 (4 << 0)
+#define TCR_TPSC_CH34_P1024 (5 << 0)
+#define TCR_TPSC_CH34_TCLKA (6 << 0)
+#define TCR_TPSC_CH34_TCLKB (7 << 0)
+#define TCR_TPSC_MASK (7 << 0)
+
+#define TMDR_BFE (1 << 6)
+#define TMDR_BFB (1 << 5)
+#define TMDR_BFA (1 << 4)
+#define TMDR_MD_NORMAL (0 << 0)
+#define TMDR_MD_PWM_1 (2 << 0)
+#define TMDR_MD_PWM_2 (3 << 0)
+#define TMDR_MD_PHASE_1 (4 << 0)
+#define TMDR_MD_PHASE_2 (5 << 0)
+#define TMDR_MD_PHASE_3 (6 << 0)
+#define TMDR_MD_PHASE_4 (7 << 0)
+#define TMDR_MD_PWM_SYNC (8 << 0)
+#define TMDR_MD_PWM_COMP_CREST (13 << 0)
+#define TMDR_MD_PWM_COMP_TROUGH (14 << 0)
+#define TMDR_MD_PWM_COMP_BOTH (15 << 0)
+#define TMDR_MD_MASK (15 << 0)
+
+#define TIOC_IOCH(n) ((n) << 4)
+#define TIOC_IOCL(n) ((n) << 0)
+#define TIOR_OC_RETAIN (0 << 0)
+#define TIOR_OC_0_CLEAR (1 << 0)
+#define TIOR_OC_0_SET (2 << 0)
+#define TIOR_OC_0_TOGGLE (3 << 0)
+#define TIOR_OC_1_CLEAR (5 << 0)
+#define TIOR_OC_1_SET (6 << 0)
+#define TIOR_OC_1_TOGGLE (7 << 0)
+#define TIOR_IC_RISING (8 << 0)
+#define TIOR_IC_FALLING (9 << 0)
+#define TIOR_IC_BOTH (10 << 0)
+#define TIOR_IC_TCNT (12 << 0)
+#define TIOR_MASK (15 << 0)
+
+#define TIER_TTGE (1 << 7)
+#define TIER_TTGE2 (1 << 6)
+#define TIER_TCIEU (1 << 5)
+#define TIER_TCIEV (1 << 4)
+#define TIER_TGIED (1 << 3)
+#define TIER_TGIEC (1 << 2)
+#define TIER_TGIEB (1 << 1)
+#define TIER_TGIEA (1 << 0)
+
+#define TSR_TCFD (1 << 7)
+#define TSR_TCFU (1 << 5)
+#define TSR_TCFV (1 << 4)
+#define TSR_TGFD (1 << 3)
+#define TSR_TGFC (1 << 2)
+#define TSR_TGFB (1 << 1)
+#define TSR_TGFA (1 << 0)
+
+static unsigned long mtu2_reg_offs[] = {
+ [TCR] = 0,
+ [TMDR] = 1,
+ [TIOR] = 2,
+ [TIER] = 4,
+ [TSR] = 5,
+ [TCNT] = 6,
+ [TGR] = 8,
+};
+
+static inline unsigned long sh_mtu2_read(struct sh_mtu2_channel *ch, int reg_nr)
+{
+ unsigned long offs;
+
+ if (reg_nr == TSTR)
+ return ioread8(ch->mtu->mapbase + 0x280);
+
+ offs = mtu2_reg_offs[reg_nr];
+
+ if ((reg_nr == TCNT) || (reg_nr == TGR))
+ return ioread16(ch->base + offs);
+ else
+ return ioread8(ch->base + offs);
+}
+
+static inline void sh_mtu2_write(struct sh_mtu2_channel *ch, int reg_nr,
+ unsigned long value)
+{
+ unsigned long offs;
+
+ if (reg_nr == TSTR)
+ return iowrite8(value, ch->mtu->mapbase + 0x280);
+
+ offs = mtu2_reg_offs[reg_nr];
+
+ if ((reg_nr == TCNT) || (reg_nr == TGR))
+ iowrite16(value, ch->base + offs);
+ else
+ iowrite8(value, ch->base + offs);
+}
+
+static void sh_mtu2_start_stop_ch(struct sh_mtu2_channel *ch, int start)
+{
+ unsigned long flags, value;
+
+ /* start stop register shared by multiple timer channels */
+ raw_spin_lock_irqsave(&ch->mtu->lock, flags);
+ value = sh_mtu2_read(ch, TSTR);
+
+ if (start)
+ value |= 1 << ch->index;
+ else
+ value &= ~(1 << ch->index);
+
+ sh_mtu2_write(ch, TSTR, value);
+ raw_spin_unlock_irqrestore(&ch->mtu->lock, flags);
+}
+
+static int sh_mtu2_enable(struct sh_mtu2_channel *ch)
+{
+ unsigned long periodic;
+ unsigned long rate;
+ int ret;
+
+ pm_runtime_get_sync(&ch->mtu->pdev->dev);
+ dev_pm_syscore_device(&ch->mtu->pdev->dev, true);
+
+ /* enable clock */
+ ret = clk_enable(ch->mtu->clk);
+ if (ret) {
+ dev_err(&ch->mtu->pdev->dev, "ch%u: cannot enable clock\n",
+ ch->index);
+ return ret;
+ }
+
+ /* make sure channel is disabled */
+ sh_mtu2_start_stop_ch(ch, 0);
+
+ rate = clk_get_rate(ch->mtu->clk) / 64;
+ periodic = (rate + HZ/2) / HZ;
+
+ /*
+ * "Periodic Counter Operation"
+ * Clear on TGRA compare match, divide clock by 64.
+ */
+ sh_mtu2_write(ch, TCR, TCR_CCLR_TGRA | TCR_TPSC_P64);
+ sh_mtu2_write(ch, TIOR, TIOC_IOCH(TIOR_OC_0_CLEAR) |
+ TIOC_IOCL(TIOR_OC_0_CLEAR));
+ sh_mtu2_write(ch, TGR, periodic);
+ sh_mtu2_write(ch, TCNT, 0);
+ sh_mtu2_write(ch, TMDR, TMDR_MD_NORMAL);
+ sh_mtu2_write(ch, TIER, TIER_TGIEA);
+
+ /* enable channel */
+ sh_mtu2_start_stop_ch(ch, 1);
+
+ return 0;
+}
+
+static void sh_mtu2_disable(struct sh_mtu2_channel *ch)
+{
+ /* disable channel */
+ sh_mtu2_start_stop_ch(ch, 0);
+
+ /* stop clock */
+ clk_disable(ch->mtu->clk);
+
+ dev_pm_syscore_device(&ch->mtu->pdev->dev, false);
+ pm_runtime_put(&ch->mtu->pdev->dev);
+}
+
+static irqreturn_t sh_mtu2_interrupt(int irq, void *dev_id)
+{
+ struct sh_mtu2_channel *ch = dev_id;
+
+ /* acknowledge interrupt */
+ sh_mtu2_read(ch, TSR);
+ sh_mtu2_write(ch, TSR, ~TSR_TGFA);
+
+ /* notify clockevent layer */
+ ch->ced.event_handler(&ch->ced);
+ return IRQ_HANDLED;
+}
+
+static struct sh_mtu2_channel *ced_to_sh_mtu2(struct clock_event_device *ced)
+{
+ return container_of(ced, struct sh_mtu2_channel, ced);
+}
+
+static int sh_mtu2_clock_event_shutdown(struct clock_event_device *ced)
+{
+ struct sh_mtu2_channel *ch = ced_to_sh_mtu2(ced);
+
+ if (clockevent_state_periodic(ced))
+ sh_mtu2_disable(ch);
+
+ return 0;
+}
+
+static int sh_mtu2_clock_event_set_periodic(struct clock_event_device *ced)
+{
+ struct sh_mtu2_channel *ch = ced_to_sh_mtu2(ced);
+
+ if (clockevent_state_periodic(ced))
+ sh_mtu2_disable(ch);
+
+ dev_info(&ch->mtu->pdev->dev, "ch%u: used for periodic clock events\n",
+ ch->index);
+ sh_mtu2_enable(ch);
+ return 0;
+}
+
+static void sh_mtu2_clock_event_suspend(struct clock_event_device *ced)
+{
+ dev_pm_genpd_suspend(&ced_to_sh_mtu2(ced)->mtu->pdev->dev);
+}
+
+static void sh_mtu2_clock_event_resume(struct clock_event_device *ced)
+{
+ dev_pm_genpd_resume(&ced_to_sh_mtu2(ced)->mtu->pdev->dev);
+}
+
+static void sh_mtu2_register_clockevent(struct sh_mtu2_channel *ch,
+ const char *name)
+{
+ struct clock_event_device *ced = &ch->ced;
+
+ ced->name = name;
+ ced->features = CLOCK_EVT_FEAT_PERIODIC;
+ ced->rating = 200;
+ ced->cpumask = cpu_possible_mask;
+ ced->set_state_shutdown = sh_mtu2_clock_event_shutdown;
+ ced->set_state_periodic = sh_mtu2_clock_event_set_periodic;
+ ced->suspend = sh_mtu2_clock_event_suspend;
+ ced->resume = sh_mtu2_clock_event_resume;
+
+ dev_info(&ch->mtu->pdev->dev, "ch%u: used for clock events\n",
+ ch->index);
+ clockevents_register_device(ced);
+}
+
+static int sh_mtu2_register(struct sh_mtu2_channel *ch, const char *name)
+{
+ ch->mtu->has_clockevent = true;
+ sh_mtu2_register_clockevent(ch, name);
+
+ return 0;
+}
+
+static const unsigned int sh_mtu2_channel_offsets[] = {
+ 0x300, 0x380, 0x000,
+};
+
+static int sh_mtu2_setup_channel(struct sh_mtu2_channel *ch, unsigned int index,
+ struct sh_mtu2_device *mtu)
+{
+ char name[6];
+ int irq;
+ int ret;
+
+ ch->mtu = mtu;
+
+ sprintf(name, "tgi%ua", index);
+ irq = platform_get_irq_byname(mtu->pdev, name);
+ if (irq < 0) {
+ /* Skip channels with no declared interrupt. */
+ return 0;
+ }
+
+ ret = request_irq(irq, sh_mtu2_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
+ dev_name(&ch->mtu->pdev->dev), ch);
+ if (ret) {
+ dev_err(&ch->mtu->pdev->dev, "ch%u: failed to request irq %d\n",
+ index, irq);
+ return ret;
+ }
+
+ ch->base = mtu->mapbase + sh_mtu2_channel_offsets[index];
+ ch->index = index;
+
+ return sh_mtu2_register(ch, dev_name(&mtu->pdev->dev));
+}
+
+static int sh_mtu2_map_memory(struct sh_mtu2_device *mtu)
+{
+ struct resource *res;
+
+ res = platform_get_resource(mtu->pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&mtu->pdev->dev, "failed to get I/O memory\n");
+ return -ENXIO;
+ }
+
+ mtu->mapbase = ioremap(res->start, resource_size(res));
+ if (mtu->mapbase == NULL)
+ return -ENXIO;
+
+ return 0;
+}
+
+static int sh_mtu2_setup(struct sh_mtu2_device *mtu,
+ struct platform_device *pdev)
+{
+ unsigned int i;
+ int ret;
+
+ mtu->pdev = pdev;
+
+ raw_spin_lock_init(&mtu->lock);
+
+ /* Get hold of clock. */
+ mtu->clk = clk_get(&mtu->pdev->dev, "fck");
+ if (IS_ERR(mtu->clk)) {
+ dev_err(&mtu->pdev->dev, "cannot get clock\n");
+ return PTR_ERR(mtu->clk);
+ }
+
+ ret = clk_prepare(mtu->clk);
+ if (ret < 0)
+ goto err_clk_put;
+
+ /* Map the memory resource. */
+ ret = sh_mtu2_map_memory(mtu);
+ if (ret < 0) {
+ dev_err(&mtu->pdev->dev, "failed to remap I/O memory\n");
+ goto err_clk_unprepare;
+ }
+
+ /* Allocate and setup the channels. */
+ ret = platform_irq_count(pdev);
+ if (ret < 0)
+ goto err_unmap;
+
+ mtu->num_channels = min_t(unsigned int, ret,
+ ARRAY_SIZE(sh_mtu2_channel_offsets));
+
+ mtu->channels = kcalloc(mtu->num_channels, sizeof(*mtu->channels),
+ GFP_KERNEL);
+ if (mtu->channels == NULL) {
+ ret = -ENOMEM;
+ goto err_unmap;
+ }
+
+ for (i = 0; i < mtu->num_channels; ++i) {
+ ret = sh_mtu2_setup_channel(&mtu->channels[i], i, mtu);
+ if (ret < 0)
+ goto err_unmap;
+ }
+
+ platform_set_drvdata(pdev, mtu);
+
+ return 0;
+
+err_unmap:
+ kfree(mtu->channels);
+ iounmap(mtu->mapbase);
+err_clk_unprepare:
+ clk_unprepare(mtu->clk);
+err_clk_put:
+ clk_put(mtu->clk);
+ return ret;
+}
+
+static int sh_mtu2_probe(struct platform_device *pdev)
+{
+ struct sh_mtu2_device *mtu = platform_get_drvdata(pdev);
+ int ret;
+
+ if (!is_sh_early_platform_device(pdev)) {
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ }
+
+ if (mtu) {
+ dev_info(&pdev->dev, "kept as earlytimer\n");
+ goto out;
+ }
+
+ mtu = kzalloc(sizeof(*mtu), GFP_KERNEL);
+ if (mtu == NULL)
+ return -ENOMEM;
+
+ ret = sh_mtu2_setup(mtu, pdev);
+ if (ret) {
+ kfree(mtu);
+ pm_runtime_idle(&pdev->dev);
+ return ret;
+ }
+ if (is_sh_early_platform_device(pdev))
+ return 0;
+
+ out:
+ if (mtu->has_clockevent)
+ pm_runtime_irq_safe(&pdev->dev);
+ else
+ pm_runtime_idle(&pdev->dev);
+
+ return 0;
+}
+
+static const struct platform_device_id sh_mtu2_id_table[] = {
+ { "sh-mtu2", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(platform, sh_mtu2_id_table);
+
+static const struct of_device_id sh_mtu2_of_table[] __maybe_unused = {
+ { .compatible = "renesas,mtu2" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sh_mtu2_of_table);
+
+static struct platform_driver sh_mtu2_device_driver = {
+ .probe = sh_mtu2_probe,
+ .driver = {
+ .name = "sh_mtu2",
+ .of_match_table = of_match_ptr(sh_mtu2_of_table),
+ .suppress_bind_attrs = true,
+ },
+ .id_table = sh_mtu2_id_table,
+};
+
+static int __init sh_mtu2_init(void)
+{
+ return platform_driver_register(&sh_mtu2_device_driver);
+}
+
+static void __exit sh_mtu2_exit(void)
+{
+ platform_driver_unregister(&sh_mtu2_device_driver);
+}
+
+#ifdef CONFIG_SUPERH
+sh_early_platform_init("earlytimer", &sh_mtu2_device_driver);
+#endif
+
+subsys_initcall(sh_mtu2_init);
+module_exit(sh_mtu2_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("SuperH MTU2 Timer Driver");
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
new file mode 100644
index 0000000000..beffff81c0
--- /dev/null
+++ b/drivers/clocksource/sh_tmu.c
@@ -0,0 +1,676 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SuperH Timer Support - TMU
+ *
+ * Copyright (C) 2009 Magnus Damm
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/sh_timer.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#ifdef CONFIG_SUPERH
+#include <asm/platform_early.h>
+#endif
+
+enum sh_tmu_model {
+ SH_TMU,
+ SH_TMU_SH3,
+};
+
+struct sh_tmu_device;
+
+struct sh_tmu_channel {
+ struct sh_tmu_device *tmu;
+ unsigned int index;
+
+ void __iomem *base;
+ int irq;
+
+ unsigned long periodic;
+ struct clock_event_device ced;
+ struct clocksource cs;
+ bool cs_enabled;
+ unsigned int enable_count;
+};
+
+struct sh_tmu_device {
+ struct platform_device *pdev;
+
+ void __iomem *mapbase;
+ struct clk *clk;
+ unsigned long rate;
+
+ enum sh_tmu_model model;
+
+ raw_spinlock_t lock; /* Protect the shared start/stop register */
+
+ struct sh_tmu_channel *channels;
+ unsigned int num_channels;
+
+ bool has_clockevent;
+ bool has_clocksource;
+};
+
+#define TSTR -1 /* shared register */
+#define TCOR 0 /* channel register */
+#define TCNT 1 /* channel register */
+#define TCR 2 /* channel register */
+
+#define TCR_UNF (1 << 8)
+#define TCR_UNIE (1 << 5)
+#define TCR_TPSC_CLK4 (0 << 0)
+#define TCR_TPSC_CLK16 (1 << 0)
+#define TCR_TPSC_CLK64 (2 << 0)
+#define TCR_TPSC_CLK256 (3 << 0)
+#define TCR_TPSC_CLK1024 (4 << 0)
+#define TCR_TPSC_MASK (7 << 0)
+
+static inline unsigned long sh_tmu_read(struct sh_tmu_channel *ch, int reg_nr)
+{
+ unsigned long offs;
+
+ if (reg_nr == TSTR) {
+ switch (ch->tmu->model) {
+ case SH_TMU_SH3:
+ return ioread8(ch->tmu->mapbase + 2);
+ case SH_TMU:
+ return ioread8(ch->tmu->mapbase + 4);
+ }
+ }
+
+ offs = reg_nr << 2;
+
+ if (reg_nr == TCR)
+ return ioread16(ch->base + offs);
+ else
+ return ioread32(ch->base + offs);
+}
+
+static inline void sh_tmu_write(struct sh_tmu_channel *ch, int reg_nr,
+ unsigned long value)
+{
+ unsigned long offs;
+
+ if (reg_nr == TSTR) {
+ switch (ch->tmu->model) {
+ case SH_TMU_SH3:
+ return iowrite8(value, ch->tmu->mapbase + 2);
+ case SH_TMU:
+ return iowrite8(value, ch->tmu->mapbase + 4);
+ }
+ }
+
+ offs = reg_nr << 2;
+
+ if (reg_nr == TCR)
+ iowrite16(value, ch->base + offs);
+ else
+ iowrite32(value, ch->base + offs);
+}
+
+static void sh_tmu_start_stop_ch(struct sh_tmu_channel *ch, int start)
+{
+ unsigned long flags, value;
+
+ /* start stop register shared by multiple timer channels */
+ raw_spin_lock_irqsave(&ch->tmu->lock, flags);
+ value = sh_tmu_read(ch, TSTR);
+
+ if (start)
+ value |= 1 << ch->index;
+ else
+ value &= ~(1 << ch->index);
+
+ sh_tmu_write(ch, TSTR, value);
+ raw_spin_unlock_irqrestore(&ch->tmu->lock, flags);
+}
+
+static int __sh_tmu_enable(struct sh_tmu_channel *ch)
+{
+ int ret;
+
+ /* enable clock */
+ ret = clk_enable(ch->tmu->clk);
+ if (ret) {
+ dev_err(&ch->tmu->pdev->dev, "ch%u: cannot enable clock\n",
+ ch->index);
+ return ret;
+ }
+
+ /* make sure channel is disabled */
+ sh_tmu_start_stop_ch(ch, 0);
+
+ /* maximum timeout */
+ sh_tmu_write(ch, TCOR, 0xffffffff);
+ sh_tmu_write(ch, TCNT, 0xffffffff);
+
+ /* configure channel to parent clock / 4, irq off */
+ sh_tmu_write(ch, TCR, TCR_TPSC_CLK4);
+
+ /* enable channel */
+ sh_tmu_start_stop_ch(ch, 1);
+
+ return 0;
+}
+
+static int sh_tmu_enable(struct sh_tmu_channel *ch)
+{
+ if (ch->enable_count++ > 0)
+ return 0;
+
+ pm_runtime_get_sync(&ch->tmu->pdev->dev);
+ dev_pm_syscore_device(&ch->tmu->pdev->dev, true);
+
+ return __sh_tmu_enable(ch);
+}
+
+static void __sh_tmu_disable(struct sh_tmu_channel *ch)
+{
+ /* disable channel */
+ sh_tmu_start_stop_ch(ch, 0);
+
+ /* disable interrupts in TMU block */
+ sh_tmu_write(ch, TCR, TCR_TPSC_CLK4);
+
+ /* stop clock */
+ clk_disable(ch->tmu->clk);
+}
+
+static void sh_tmu_disable(struct sh_tmu_channel *ch)
+{
+ if (WARN_ON(ch->enable_count == 0))
+ return;
+
+ if (--ch->enable_count > 0)
+ return;
+
+ __sh_tmu_disable(ch);
+
+ dev_pm_syscore_device(&ch->tmu->pdev->dev, false);
+ pm_runtime_put(&ch->tmu->pdev->dev);
+}
+
+static void sh_tmu_set_next(struct sh_tmu_channel *ch, unsigned long delta,
+ int periodic)
+{
+ /* stop timer */
+ sh_tmu_start_stop_ch(ch, 0);
+
+ /* acknowledge interrupt */
+ sh_tmu_read(ch, TCR);
+
+ /* enable interrupt */
+ sh_tmu_write(ch, TCR, TCR_UNIE | TCR_TPSC_CLK4);
+
+ /* reload delta value in case of periodic timer */
+ if (periodic)
+ sh_tmu_write(ch, TCOR, delta);
+ else
+ sh_tmu_write(ch, TCOR, 0xffffffff);
+
+ sh_tmu_write(ch, TCNT, delta);
+
+ /* start timer */
+ sh_tmu_start_stop_ch(ch, 1);
+}
+
+static irqreturn_t sh_tmu_interrupt(int irq, void *dev_id)
+{
+ struct sh_tmu_channel *ch = dev_id;
+
+ /* disable or acknowledge interrupt */
+ if (clockevent_state_oneshot(&ch->ced))
+ sh_tmu_write(ch, TCR, TCR_TPSC_CLK4);
+ else
+ sh_tmu_write(ch, TCR, TCR_UNIE | TCR_TPSC_CLK4);
+
+ /* notify clockevent layer */
+ ch->ced.event_handler(&ch->ced);
+ return IRQ_HANDLED;
+}
+
+static struct sh_tmu_channel *cs_to_sh_tmu(struct clocksource *cs)
+{
+ return container_of(cs, struct sh_tmu_channel, cs);
+}
+
+static u64 sh_tmu_clocksource_read(struct clocksource *cs)
+{
+ struct sh_tmu_channel *ch = cs_to_sh_tmu(cs);
+
+ return sh_tmu_read(ch, TCNT) ^ 0xffffffff;
+}
+
+static int sh_tmu_clocksource_enable(struct clocksource *cs)
+{
+ struct sh_tmu_channel *ch = cs_to_sh_tmu(cs);
+ int ret;
+
+ if (WARN_ON(ch->cs_enabled))
+ return 0;
+
+ ret = sh_tmu_enable(ch);
+ if (!ret)
+ ch->cs_enabled = true;
+
+ return ret;
+}
+
+static void sh_tmu_clocksource_disable(struct clocksource *cs)
+{
+ struct sh_tmu_channel *ch = cs_to_sh_tmu(cs);
+
+ if (WARN_ON(!ch->cs_enabled))
+ return;
+
+ sh_tmu_disable(ch);
+ ch->cs_enabled = false;
+}
+
+static void sh_tmu_clocksource_suspend(struct clocksource *cs)
+{
+ struct sh_tmu_channel *ch = cs_to_sh_tmu(cs);
+
+ if (!ch->cs_enabled)
+ return;
+
+ if (--ch->enable_count == 0) {
+ __sh_tmu_disable(ch);
+ dev_pm_genpd_suspend(&ch->tmu->pdev->dev);
+ }
+}
+
+static void sh_tmu_clocksource_resume(struct clocksource *cs)
+{
+ struct sh_tmu_channel *ch = cs_to_sh_tmu(cs);
+
+ if (!ch->cs_enabled)
+ return;
+
+ if (ch->enable_count++ == 0) {
+ dev_pm_genpd_resume(&ch->tmu->pdev->dev);
+ __sh_tmu_enable(ch);
+ }
+}
+
+static int sh_tmu_register_clocksource(struct sh_tmu_channel *ch,
+ const char *name)
+{
+ struct clocksource *cs = &ch->cs;
+
+ cs->name = name;
+ cs->rating = 200;
+ cs->read = sh_tmu_clocksource_read;
+ cs->enable = sh_tmu_clocksource_enable;
+ cs->disable = sh_tmu_clocksource_disable;
+ cs->suspend = sh_tmu_clocksource_suspend;
+ cs->resume = sh_tmu_clocksource_resume;
+ cs->mask = CLOCKSOURCE_MASK(32);
+ cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ dev_info(&ch->tmu->pdev->dev, "ch%u: used as clock source\n",
+ ch->index);
+
+ clocksource_register_hz(cs, ch->tmu->rate);
+ return 0;
+}
+
+static struct sh_tmu_channel *ced_to_sh_tmu(struct clock_event_device *ced)
+{
+ return container_of(ced, struct sh_tmu_channel, ced);
+}
+
+static void sh_tmu_clock_event_start(struct sh_tmu_channel *ch, int periodic)
+{
+ sh_tmu_enable(ch);
+
+ if (periodic) {
+ ch->periodic = (ch->tmu->rate + HZ/2) / HZ;
+ sh_tmu_set_next(ch, ch->periodic, 1);
+ }
+}
+
+static int sh_tmu_clock_event_shutdown(struct clock_event_device *ced)
+{
+ struct sh_tmu_channel *ch = ced_to_sh_tmu(ced);
+
+ if (clockevent_state_oneshot(ced) || clockevent_state_periodic(ced))
+ sh_tmu_disable(ch);
+ return 0;
+}
+
+static int sh_tmu_clock_event_set_state(struct clock_event_device *ced,
+ int periodic)
+{
+ struct sh_tmu_channel *ch = ced_to_sh_tmu(ced);
+
+ /* deal with old setting first */
+ if (clockevent_state_oneshot(ced) || clockevent_state_periodic(ced))
+ sh_tmu_disable(ch);
+
+ dev_info(&ch->tmu->pdev->dev, "ch%u: used for %s clock events\n",
+ ch->index, periodic ? "periodic" : "oneshot");
+ sh_tmu_clock_event_start(ch, periodic);
+ return 0;
+}
+
+static int sh_tmu_clock_event_set_oneshot(struct clock_event_device *ced)
+{
+ return sh_tmu_clock_event_set_state(ced, 0);
+}
+
+static int sh_tmu_clock_event_set_periodic(struct clock_event_device *ced)
+{
+ return sh_tmu_clock_event_set_state(ced, 1);
+}
+
+static int sh_tmu_clock_event_next(unsigned long delta,
+ struct clock_event_device *ced)
+{
+ struct sh_tmu_channel *ch = ced_to_sh_tmu(ced);
+
+ BUG_ON(!clockevent_state_oneshot(ced));
+
+ /* program new delta value */
+ sh_tmu_set_next(ch, delta, 0);
+ return 0;
+}
+
+static void sh_tmu_clock_event_suspend(struct clock_event_device *ced)
+{
+ dev_pm_genpd_suspend(&ced_to_sh_tmu(ced)->tmu->pdev->dev);
+}
+
+static void sh_tmu_clock_event_resume(struct clock_event_device *ced)
+{
+ dev_pm_genpd_resume(&ced_to_sh_tmu(ced)->tmu->pdev->dev);
+}
+
+static void sh_tmu_register_clockevent(struct sh_tmu_channel *ch,
+ const char *name)
+{
+ struct clock_event_device *ced = &ch->ced;
+ int ret;
+
+ ced->name = name;
+ ced->features = CLOCK_EVT_FEAT_PERIODIC;
+ ced->features |= CLOCK_EVT_FEAT_ONESHOT;
+ ced->rating = 200;
+ ced->cpumask = cpu_possible_mask;
+ ced->set_next_event = sh_tmu_clock_event_next;
+ ced->set_state_shutdown = sh_tmu_clock_event_shutdown;
+ ced->set_state_periodic = sh_tmu_clock_event_set_periodic;
+ ced->set_state_oneshot = sh_tmu_clock_event_set_oneshot;
+ ced->suspend = sh_tmu_clock_event_suspend;
+ ced->resume = sh_tmu_clock_event_resume;
+
+ dev_info(&ch->tmu->pdev->dev, "ch%u: used for clock events\n",
+ ch->index);
+
+ clockevents_config_and_register(ced, ch->tmu->rate, 0x300, 0xffffffff);
+
+ ret = request_irq(ch->irq, sh_tmu_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
+ dev_name(&ch->tmu->pdev->dev), ch);
+ if (ret) {
+ dev_err(&ch->tmu->pdev->dev, "ch%u: failed to request irq %d\n",
+ ch->index, ch->irq);
+ return;
+ }
+}
+
+static int sh_tmu_register(struct sh_tmu_channel *ch, const char *name,
+ bool clockevent, bool clocksource)
+{
+ if (clockevent) {
+ ch->tmu->has_clockevent = true;
+ sh_tmu_register_clockevent(ch, name);
+ } else if (clocksource) {
+ ch->tmu->has_clocksource = true;
+ sh_tmu_register_clocksource(ch, name);
+ }
+
+ return 0;
+}
+
+static int sh_tmu_channel_setup(struct sh_tmu_channel *ch, unsigned int index,
+ bool clockevent, bool clocksource,
+ struct sh_tmu_device *tmu)
+{
+ /* Skip unused channels. */
+ if (!clockevent && !clocksource)
+ return 0;
+
+ ch->tmu = tmu;
+ ch->index = index;
+
+ if (tmu->model == SH_TMU_SH3)
+ ch->base = tmu->mapbase + 4 + ch->index * 12;
+ else
+ ch->base = tmu->mapbase + 8 + ch->index * 12;
+
+ ch->irq = platform_get_irq(tmu->pdev, index);
+ if (ch->irq < 0)
+ return ch->irq;
+
+ ch->cs_enabled = false;
+ ch->enable_count = 0;
+
+ return sh_tmu_register(ch, dev_name(&tmu->pdev->dev),
+ clockevent, clocksource);
+}
+
+static int sh_tmu_map_memory(struct sh_tmu_device *tmu)
+{
+ struct resource *res;
+
+ res = platform_get_resource(tmu->pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&tmu->pdev->dev, "failed to get I/O memory\n");
+ return -ENXIO;
+ }
+
+ tmu->mapbase = ioremap(res->start, resource_size(res));
+ if (tmu->mapbase == NULL)
+ return -ENXIO;
+
+ return 0;
+}
+
+static int sh_tmu_parse_dt(struct sh_tmu_device *tmu)
+{
+ struct device_node *np = tmu->pdev->dev.of_node;
+
+ tmu->model = SH_TMU;
+ tmu->num_channels = 3;
+
+ of_property_read_u32(np, "#renesas,channels", &tmu->num_channels);
+
+ if (tmu->num_channels != 2 && tmu->num_channels != 3) {
+ dev_err(&tmu->pdev->dev, "invalid number of channels %u\n",
+ tmu->num_channels);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sh_tmu_setup(struct sh_tmu_device *tmu, struct platform_device *pdev)
+{
+ unsigned int i;
+ int ret;
+
+ tmu->pdev = pdev;
+
+ raw_spin_lock_init(&tmu->lock);
+
+ if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+ ret = sh_tmu_parse_dt(tmu);
+ if (ret < 0)
+ return ret;
+ } else if (pdev->dev.platform_data) {
+ const struct platform_device_id *id = pdev->id_entry;
+ struct sh_timer_config *cfg = pdev->dev.platform_data;
+
+ tmu->model = id->driver_data;
+ tmu->num_channels = hweight8(cfg->channels_mask);
+ } else {
+ dev_err(&tmu->pdev->dev, "missing platform data\n");
+ return -ENXIO;
+ }
+
+ /* Get hold of clock. */
+ tmu->clk = clk_get(&tmu->pdev->dev, "fck");
+ if (IS_ERR(tmu->clk)) {
+ dev_err(&tmu->pdev->dev, "cannot get clock\n");
+ return PTR_ERR(tmu->clk);
+ }
+
+ ret = clk_prepare(tmu->clk);
+ if (ret < 0)
+ goto err_clk_put;
+
+ /* Determine clock rate. */
+ ret = clk_enable(tmu->clk);
+ if (ret < 0)
+ goto err_clk_unprepare;
+
+ tmu->rate = clk_get_rate(tmu->clk) / 4;
+ clk_disable(tmu->clk);
+
+ /* Map the memory resource. */
+ ret = sh_tmu_map_memory(tmu);
+ if (ret < 0) {
+ dev_err(&tmu->pdev->dev, "failed to remap I/O memory\n");
+ goto err_clk_unprepare;
+ }
+
+ /* Allocate and setup the channels. */
+ tmu->channels = kcalloc(tmu->num_channels, sizeof(*tmu->channels),
+ GFP_KERNEL);
+ if (tmu->channels == NULL) {
+ ret = -ENOMEM;
+ goto err_unmap;
+ }
+
+ /*
+ * Use the first channel as a clock event device and the second channel
+ * as a clock source.
+ */
+ for (i = 0; i < tmu->num_channels; ++i) {
+ ret = sh_tmu_channel_setup(&tmu->channels[i], i,
+ i == 0, i == 1, tmu);
+ if (ret < 0)
+ goto err_unmap;
+ }
+
+ platform_set_drvdata(pdev, tmu);
+
+ return 0;
+
+err_unmap:
+ kfree(tmu->channels);
+ iounmap(tmu->mapbase);
+err_clk_unprepare:
+ clk_unprepare(tmu->clk);
+err_clk_put:
+ clk_put(tmu->clk);
+ return ret;
+}
+
+static int sh_tmu_probe(struct platform_device *pdev)
+{
+ struct sh_tmu_device *tmu = platform_get_drvdata(pdev);
+ int ret;
+
+ if (!is_sh_early_platform_device(pdev)) {
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ }
+
+ if (tmu) {
+ dev_info(&pdev->dev, "kept as earlytimer\n");
+ goto out;
+ }
+
+ tmu = kzalloc(sizeof(*tmu), GFP_KERNEL);
+ if (tmu == NULL)
+ return -ENOMEM;
+
+ ret = sh_tmu_setup(tmu, pdev);
+ if (ret) {
+ kfree(tmu);
+ pm_runtime_idle(&pdev->dev);
+ return ret;
+ }
+
+ if (is_sh_early_platform_device(pdev))
+ return 0;
+
+ out:
+ if (tmu->has_clockevent || tmu->has_clocksource)
+ pm_runtime_irq_safe(&pdev->dev);
+ else
+ pm_runtime_idle(&pdev->dev);
+
+ return 0;
+}
+
+static const struct platform_device_id sh_tmu_id_table[] = {
+ { "sh-tmu", SH_TMU },
+ { "sh-tmu-sh3", SH_TMU_SH3 },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, sh_tmu_id_table);
+
+static const struct of_device_id sh_tmu_of_table[] __maybe_unused = {
+ { .compatible = "renesas,tmu" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sh_tmu_of_table);
+
+static struct platform_driver sh_tmu_device_driver = {
+ .probe = sh_tmu_probe,
+ .driver = {
+ .name = "sh_tmu",
+ .of_match_table = of_match_ptr(sh_tmu_of_table),
+ .suppress_bind_attrs = true,
+ },
+ .id_table = sh_tmu_id_table,
+};
+
+static int __init sh_tmu_init(void)
+{
+ return platform_driver_register(&sh_tmu_device_driver);
+}
+
+static void __exit sh_tmu_exit(void)
+{
+ platform_driver_unregister(&sh_tmu_device_driver);
+}
+
+#ifdef CONFIG_SUPERH
+sh_early_platform_init("earlytimer", &sh_tmu_device_driver);
+#endif
+
+subsys_initcall(sh_tmu_init);
+module_exit(sh_tmu_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("SuperH TMU Timer Driver");
diff --git a/drivers/clocksource/timer-armada-370-xp.c b/drivers/clocksource/timer-armada-370-xp.c
new file mode 100644
index 0000000000..6ec565d693
--- /dev/null
+++ b/drivers/clocksource/timer-armada-370-xp.c
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell Armada 370/XP SoC timer handling.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Timer 0 is used as free-running clocksource, while timer 1 is
+ * used as clock_event_device.
+ *
+ * ---
+ * Clocksource driver for Armada 370 and Armada XP SoC.
+ * This driver implements one compatible string for each SoC, given
+ * each has its own characteristics:
+ *
+ * * Armada 370 has no 25 MHz fixed timer.
+ *
+ * * Armada XP cannot work properly without such 25 MHz fixed timer as
+ * doing otherwise leads to using a clocksource whose frequency varies
+ * when doing cpufreq frequency changes.
+ *
+ * See Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/timer.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/sched_clock.h>
+#include <linux/percpu.h>
+#include <linux/syscore_ops.h>
+
+#include <asm/delay.h>
+
+/*
+ * Timer block registers.
+ */
+#define TIMER_CTRL_OFF 0x0000
+#define TIMER0_EN BIT(0)
+#define TIMER0_RELOAD_EN BIT(1)
+#define TIMER0_25MHZ BIT(11)
+#define TIMER0_DIV(div) ((div) << 19)
+#define TIMER1_EN BIT(2)
+#define TIMER1_RELOAD_EN BIT(3)
+#define TIMER1_25MHZ BIT(12)
+#define TIMER1_DIV(div) ((div) << 22)
+#define TIMER_EVENTS_STATUS 0x0004
+#define TIMER0_CLR_MASK (~0x1)
+#define TIMER1_CLR_MASK (~0x100)
+#define TIMER0_RELOAD_OFF 0x0010
+#define TIMER0_VAL_OFF 0x0014
+#define TIMER1_RELOAD_OFF 0x0018
+#define TIMER1_VAL_OFF 0x001c
+
+#define LCL_TIMER_EVENTS_STATUS 0x0028
+/* Global timers are connected to the coherency fabric clock, and the
+ below divider reduces their incrementing frequency. */
+#define TIMER_DIVIDER_SHIFT 5
+#define TIMER_DIVIDER (1 << TIMER_DIVIDER_SHIFT)
+
+/*
+ * SoC-specific data.
+ */
+static void __iomem *timer_base, *local_base;
+static unsigned int timer_clk;
+static bool timer25Mhz = true;
+static u32 enable_mask;
+
+/*
+ * Number of timer ticks per jiffy.
+ */
+static u32 ticks_per_jiffy;
+
+static struct clock_event_device __percpu *armada_370_xp_evt;
+
+static void local_timer_ctrl_clrset(u32 clr, u32 set)
+{
+ writel((readl(local_base + TIMER_CTRL_OFF) & ~clr) | set,
+ local_base + TIMER_CTRL_OFF);
+}
+
+static u64 notrace armada_370_xp_read_sched_clock(void)
+{
+ return ~readl(timer_base + TIMER0_VAL_OFF);
+}
+
+/*
+ * Clockevent handling.
+ */
+static int
+armada_370_xp_clkevt_next_event(unsigned long delta,
+ struct clock_event_device *dev)
+{
+ /*
+ * Clear clockevent timer interrupt.
+ */
+ writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS);
+
+ /*
+ * Setup new clockevent timer value.
+ */
+ writel(delta, local_base + TIMER0_VAL_OFF);
+
+ /*
+ * Enable the timer.
+ */
+ local_timer_ctrl_clrset(TIMER0_RELOAD_EN, enable_mask);
+ return 0;
+}
+
+static int armada_370_xp_clkevt_shutdown(struct clock_event_device *evt)
+{
+ /*
+ * Disable timer.
+ */
+ local_timer_ctrl_clrset(TIMER0_EN, 0);
+
+ /*
+ * ACK pending timer interrupt.
+ */
+ writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS);
+ return 0;
+}
+
+static int armada_370_xp_clkevt_set_periodic(struct clock_event_device *evt)
+{
+ /*
+ * Setup timer to fire at 1/HZ intervals.
+ */
+ writel(ticks_per_jiffy - 1, local_base + TIMER0_RELOAD_OFF);
+ writel(ticks_per_jiffy - 1, local_base + TIMER0_VAL_OFF);
+
+ /*
+ * Enable timer.
+ */
+ local_timer_ctrl_clrset(0, TIMER0_RELOAD_EN | enable_mask);
+ return 0;
+}
+
+static int armada_370_xp_clkevt_irq;
+
+static irqreturn_t armada_370_xp_timer_interrupt(int irq, void *dev_id)
+{
+ /*
+ * ACK timer interrupt and call event handler.
+ */
+ struct clock_event_device *evt = dev_id;
+
+ writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS);
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+static int armada_370_xp_timer_starting_cpu(unsigned int cpu)
+{
+ struct clock_event_device *evt = per_cpu_ptr(armada_370_xp_evt, cpu);
+ u32 clr = 0, set = 0;
+
+ if (timer25Mhz)
+ set = TIMER0_25MHZ;
+ else
+ clr = TIMER0_25MHZ;
+ local_timer_ctrl_clrset(clr, set);
+
+ evt->name = "armada_370_xp_per_cpu_tick";
+ evt->features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_PERIODIC;
+ evt->shift = 32;
+ evt->rating = 300;
+ evt->set_next_event = armada_370_xp_clkevt_next_event;
+ evt->set_state_shutdown = armada_370_xp_clkevt_shutdown;
+ evt->set_state_periodic = armada_370_xp_clkevt_set_periodic;
+ evt->set_state_oneshot = armada_370_xp_clkevt_shutdown;
+ evt->tick_resume = armada_370_xp_clkevt_shutdown;
+ evt->irq = armada_370_xp_clkevt_irq;
+ evt->cpumask = cpumask_of(cpu);
+
+ clockevents_config_and_register(evt, timer_clk, 1, 0xfffffffe);
+ enable_percpu_irq(evt->irq, 0);
+
+ return 0;
+}
+
+static int armada_370_xp_timer_dying_cpu(unsigned int cpu)
+{
+ struct clock_event_device *evt = per_cpu_ptr(armada_370_xp_evt, cpu);
+
+ evt->set_state_shutdown(evt);
+ disable_percpu_irq(evt->irq);
+ return 0;
+}
+
+static u32 timer0_ctrl_reg, timer0_local_ctrl_reg;
+
+static int armada_370_xp_timer_suspend(void)
+{
+ timer0_ctrl_reg = readl(timer_base + TIMER_CTRL_OFF);
+ timer0_local_ctrl_reg = readl(local_base + TIMER_CTRL_OFF);
+ return 0;
+}
+
+static void armada_370_xp_timer_resume(void)
+{
+ writel(0xffffffff, timer_base + TIMER0_VAL_OFF);
+ writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF);
+ writel(timer0_ctrl_reg, timer_base + TIMER_CTRL_OFF);
+ writel(timer0_local_ctrl_reg, local_base + TIMER_CTRL_OFF);
+}
+
+static struct syscore_ops armada_370_xp_timer_syscore_ops = {
+ .suspend = armada_370_xp_timer_suspend,
+ .resume = armada_370_xp_timer_resume,
+};
+
+static unsigned long armada_370_delay_timer_read(void)
+{
+ return ~readl(timer_base + TIMER0_VAL_OFF);
+}
+
+static struct delay_timer armada_370_delay_timer = {
+ .read_current_timer = armada_370_delay_timer_read,
+};
+
+static int __init armada_370_xp_timer_common_init(struct device_node *np)
+{
+ u32 clr = 0, set = 0;
+ int res;
+
+ timer_base = of_iomap(np, 0);
+ if (!timer_base) {
+ pr_err("Failed to iomap\n");
+ return -ENXIO;
+ }
+
+ local_base = of_iomap(np, 1);
+ if (!local_base) {
+ pr_err("Failed to iomap\n");
+ return -ENXIO;
+ }
+
+ if (timer25Mhz) {
+ set = TIMER0_25MHZ;
+ enable_mask = TIMER0_EN;
+ } else {
+ clr = TIMER0_25MHZ;
+ enable_mask = TIMER0_EN | TIMER0_DIV(TIMER_DIVIDER_SHIFT);
+ }
+ atomic_io_modify(timer_base + TIMER_CTRL_OFF, clr | set, set);
+ local_timer_ctrl_clrset(clr, set);
+
+ /*
+ * We use timer 0 as clocksource, and private(local) timer 0
+ * for clockevents
+ */
+ armada_370_xp_clkevt_irq = irq_of_parse_and_map(np, 4);
+
+ ticks_per_jiffy = (timer_clk + HZ / 2) / HZ;
+
+ /*
+ * Setup free-running clocksource timer (interrupts
+ * disabled).
+ */
+ writel(0xffffffff, timer_base + TIMER0_VAL_OFF);
+ writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF);
+
+ atomic_io_modify(timer_base + TIMER_CTRL_OFF,
+ TIMER0_RELOAD_EN | enable_mask,
+ TIMER0_RELOAD_EN | enable_mask);
+
+ armada_370_delay_timer.freq = timer_clk;
+ register_current_timer_delay(&armada_370_delay_timer);
+
+ /*
+ * Set scale and timer for sched_clock.
+ */
+ sched_clock_register(armada_370_xp_read_sched_clock, 32, timer_clk);
+
+ res = clocksource_mmio_init(timer_base + TIMER0_VAL_OFF,
+ "armada_370_xp_clocksource",
+ timer_clk, 300, 32, clocksource_mmio_readl_down);
+ if (res) {
+ pr_err("Failed to initialize clocksource mmio\n");
+ return res;
+ }
+
+ armada_370_xp_evt = alloc_percpu(struct clock_event_device);
+ if (!armada_370_xp_evt)
+ return -ENOMEM;
+
+ /*
+ * Setup clockevent timer (interrupt-driven).
+ */
+ res = request_percpu_irq(armada_370_xp_clkevt_irq,
+ armada_370_xp_timer_interrupt,
+ "armada_370_xp_per_cpu_tick",
+ armada_370_xp_evt);
+ /* Immediately configure the timer on the boot CPU */
+ if (res) {
+ pr_err("Failed to request percpu irq\n");
+ return res;
+ }
+
+ res = cpuhp_setup_state(CPUHP_AP_ARMADA_TIMER_STARTING,
+ "clockevents/armada:starting",
+ armada_370_xp_timer_starting_cpu,
+ armada_370_xp_timer_dying_cpu);
+ if (res) {
+ pr_err("Failed to setup hotplug state and timer\n");
+ return res;
+ }
+
+ register_syscore_ops(&armada_370_xp_timer_syscore_ops);
+
+ return 0;
+}
+
+static int __init armada_xp_timer_init(struct device_node *np)
+{
+ struct clk *clk = of_clk_get_by_name(np, "fixed");
+ int ret;
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to get clock\n");
+ return PTR_ERR(clk);
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ return ret;
+
+ timer_clk = clk_get_rate(clk);
+
+ return armada_370_xp_timer_common_init(np);
+}
+TIMER_OF_DECLARE(armada_xp, "marvell,armada-xp-timer",
+ armada_xp_timer_init);
+
+static int __init armada_375_timer_init(struct device_node *np)
+{
+ struct clk *clk;
+ int ret;
+
+ clk = of_clk_get_by_name(np, "fixed");
+ if (!IS_ERR(clk)) {
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ return ret;
+ timer_clk = clk_get_rate(clk);
+ } else {
+
+ /*
+ * This fallback is required in order to retain proper
+ * devicetree backwards compatibility.
+ */
+ clk = of_clk_get(np, 0);
+
+ /* Must have at least a clock */
+ if (IS_ERR(clk)) {
+ pr_err("Failed to get clock\n");
+ return PTR_ERR(clk);
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ return ret;
+
+ timer_clk = clk_get_rate(clk) / TIMER_DIVIDER;
+ timer25Mhz = false;
+ }
+
+ return armada_370_xp_timer_common_init(np);
+}
+TIMER_OF_DECLARE(armada_375, "marvell,armada-375-timer",
+ armada_375_timer_init);
+
+static int __init armada_370_timer_init(struct device_node *np)
+{
+ struct clk *clk;
+ int ret;
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("Failed to get clock\n");
+ return PTR_ERR(clk);
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ return ret;
+
+ timer_clk = clk_get_rate(clk) / TIMER_DIVIDER;
+ timer25Mhz = false;
+
+ return armada_370_xp_timer_common_init(np);
+}
+TIMER_OF_DECLARE(armada_370, "marvell,armada-370-timer",
+ armada_370_timer_init);
diff --git a/drivers/clocksource/timer-atmel-pit.c b/drivers/clocksource/timer-atmel-pit.c
new file mode 100644
index 0000000000..b4f264ed19
--- /dev/null
+++ b/drivers/clocksource/timer-atmel-pit.c
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam926x_time.c - Periodic Interval Timer (PIT) for at91sam926x
+ *
+ * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
+ * Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
+ * Converted to ClockSource/ClockEvents by David Brownell.
+ */
+
+#define pr_fmt(fmt) "AT91: PIT: " fmt
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+
+#define AT91_PIT_MR 0x00 /* Mode Register */
+#define AT91_PIT_PITIEN BIT(25) /* Timer Interrupt Enable */
+#define AT91_PIT_PITEN BIT(24) /* Timer Enabled */
+#define AT91_PIT_PIV GENMASK(19, 0) /* Periodic Interval Value */
+
+#define AT91_PIT_SR 0x04 /* Status Register */
+#define AT91_PIT_PITS BIT(0) /* Timer Status */
+
+#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */
+#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */
+#define AT91_PIT_PICNT GENMASK(31, 20) /* Interval Counter */
+#define AT91_PIT_CPIV GENMASK(19, 0) /* Inverval Value */
+
+#define PIT_CPIV(x) ((x) & AT91_PIT_CPIV)
+#define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20)
+
+struct pit_data {
+ struct clock_event_device clkevt;
+ struct clocksource clksrc;
+
+ void __iomem *base;
+ u32 cycle;
+ u32 cnt;
+ unsigned int irq;
+ struct clk *mck;
+};
+
+static inline struct pit_data *clksrc_to_pit_data(struct clocksource *clksrc)
+{
+ return container_of(clksrc, struct pit_data, clksrc);
+}
+
+static inline struct pit_data *clkevt_to_pit_data(struct clock_event_device *clkevt)
+{
+ return container_of(clkevt, struct pit_data, clkevt);
+}
+
+static inline unsigned int pit_read(void __iomem *base, unsigned int reg_offset)
+{
+ return readl_relaxed(base + reg_offset);
+}
+
+static inline void pit_write(void __iomem *base, unsigned int reg_offset, unsigned long value)
+{
+ writel_relaxed(value, base + reg_offset);
+}
+
+/*
+ * Clocksource: just a monotonic counter of MCK/16 cycles.
+ * We don't care whether or not PIT irqs are enabled.
+ */
+static u64 read_pit_clk(struct clocksource *cs)
+{
+ struct pit_data *data = clksrc_to_pit_data(cs);
+ unsigned long flags;
+ u32 elapsed;
+ u32 t;
+
+ raw_local_irq_save(flags);
+ elapsed = data->cnt;
+ t = pit_read(data->base, AT91_PIT_PIIR);
+ raw_local_irq_restore(flags);
+
+ elapsed += PIT_PICNT(t) * data->cycle;
+ elapsed += PIT_CPIV(t);
+ return elapsed;
+}
+
+static int pit_clkevt_shutdown(struct clock_event_device *dev)
+{
+ struct pit_data *data = clkevt_to_pit_data(dev);
+
+ /* disable irq, leaving the clocksource active */
+ pit_write(data->base, AT91_PIT_MR, (data->cycle - 1) | AT91_PIT_PITEN);
+ return 0;
+}
+
+/*
+ * Clockevent device: interrupts every 1/HZ (== pit_cycles * MCK/16)
+ */
+static int pit_clkevt_set_periodic(struct clock_event_device *dev)
+{
+ struct pit_data *data = clkevt_to_pit_data(dev);
+
+ /* update clocksource counter */
+ data->cnt += data->cycle * PIT_PICNT(pit_read(data->base, AT91_PIT_PIVR));
+ pit_write(data->base, AT91_PIT_MR,
+ (data->cycle - 1) | AT91_PIT_PITEN | AT91_PIT_PITIEN);
+ return 0;
+}
+
+static void at91sam926x_pit_suspend(struct clock_event_device *cedev)
+{
+ struct pit_data *data = clkevt_to_pit_data(cedev);
+
+ /* Disable timer */
+ pit_write(data->base, AT91_PIT_MR, 0);
+}
+
+static void at91sam926x_pit_reset(struct pit_data *data)
+{
+ /* Disable timer and irqs */
+ pit_write(data->base, AT91_PIT_MR, 0);
+
+ /* Clear any pending interrupts, wait for PIT to stop counting */
+ while (PIT_CPIV(pit_read(data->base, AT91_PIT_PIVR)) != 0)
+ cpu_relax();
+
+ /* Start PIT but don't enable IRQ */
+ pit_write(data->base, AT91_PIT_MR,
+ (data->cycle - 1) | AT91_PIT_PITEN);
+}
+
+static void at91sam926x_pit_resume(struct clock_event_device *cedev)
+{
+ struct pit_data *data = clkevt_to_pit_data(cedev);
+
+ at91sam926x_pit_reset(data);
+}
+
+/*
+ * IRQ handler for the timer.
+ */
+static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
+{
+ struct pit_data *data = dev_id;
+
+ /* The PIT interrupt may be disabled, and is shared */
+ if (clockevent_state_periodic(&data->clkevt) &&
+ (pit_read(data->base, AT91_PIT_SR) & AT91_PIT_PITS)) {
+ /* Get number of ticks performed before irq, and ack it */
+ data->cnt += data->cycle * PIT_PICNT(pit_read(data->base,
+ AT91_PIT_PIVR));
+ data->clkevt.event_handler(&data->clkevt);
+
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+/*
+ * Set up both clocksource and clockevent support.
+ */
+static int __init at91sam926x_pit_dt_init(struct device_node *node)
+{
+ unsigned long pit_rate;
+ unsigned bits;
+ int ret;
+ struct pit_data *data;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->base = of_iomap(node, 0);
+ if (!data->base) {
+ pr_err("Could not map PIT address\n");
+ ret = -ENXIO;
+ goto exit;
+ }
+
+ data->mck = of_clk_get(node, 0);
+ if (IS_ERR(data->mck)) {
+ pr_err("Unable to get mck clk\n");
+ ret = PTR_ERR(data->mck);
+ goto exit;
+ }
+
+ ret = clk_prepare_enable(data->mck);
+ if (ret) {
+ pr_err("Unable to enable mck\n");
+ goto exit;
+ }
+
+ /* Get the interrupts property */
+ data->irq = irq_of_parse_and_map(node, 0);
+ if (!data->irq) {
+ pr_err("Unable to get IRQ from DT\n");
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ /*
+ * Use our actual MCK to figure out how many MCK/16 ticks per
+ * 1/HZ period (instead of a compile-time constant LATCH).
+ */
+ pit_rate = clk_get_rate(data->mck) / 16;
+ data->cycle = DIV_ROUND_CLOSEST(pit_rate, HZ);
+ WARN_ON(((data->cycle - 1) & ~AT91_PIT_PIV) != 0);
+
+ /* Initialize and enable the timer */
+ at91sam926x_pit_reset(data);
+
+ /*
+ * Register clocksource. The high order bits of PIV are unused,
+ * so this isn't a 32-bit counter unless we get clockevent irqs.
+ */
+ bits = 12 /* PICNT */ + ilog2(data->cycle) /* PIV */;
+ data->clksrc.mask = CLOCKSOURCE_MASK(bits);
+ data->clksrc.name = "pit";
+ data->clksrc.rating = 175;
+ data->clksrc.read = read_pit_clk;
+ data->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ ret = clocksource_register_hz(&data->clksrc, pit_rate);
+ if (ret) {
+ pr_err("Failed to register clocksource\n");
+ goto exit;
+ }
+
+ /* Set up irq handler */
+ ret = request_irq(data->irq, at91sam926x_pit_interrupt,
+ IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
+ "at91_tick", data);
+ if (ret) {
+ pr_err("Unable to setup IRQ\n");
+ clocksource_unregister(&data->clksrc);
+ goto exit;
+ }
+
+ /* Set up and register clockevents */
+ data->clkevt.name = "pit";
+ data->clkevt.features = CLOCK_EVT_FEAT_PERIODIC;
+ data->clkevt.shift = 32;
+ data->clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, data->clkevt.shift);
+ data->clkevt.rating = 100;
+ data->clkevt.cpumask = cpumask_of(0);
+
+ data->clkevt.set_state_shutdown = pit_clkevt_shutdown;
+ data->clkevt.set_state_periodic = pit_clkevt_set_periodic;
+ data->clkevt.resume = at91sam926x_pit_resume;
+ data->clkevt.suspend = at91sam926x_pit_suspend;
+ clockevents_register_device(&data->clkevt);
+
+ return 0;
+
+exit:
+ kfree(data);
+ return ret;
+}
+TIMER_OF_DECLARE(at91sam926x_pit, "atmel,at91sam9260-pit",
+ at91sam926x_pit_dt_init);
diff --git a/drivers/clocksource/timer-atmel-st.c b/drivers/clocksource/timer-atmel-st.c
new file mode 100644
index 0000000000..73e8aee445
--- /dev/null
+++ b/drivers/clocksource/timer-atmel-st.c
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * linux/arch/arm/mach-at91/at91rm9200_time.c
+ *
+ * Copyright (C) 2003 SAN People
+ * Copyright (C) 2003 ATMEL
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/export.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-st.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+
+static unsigned long last_crtr;
+static u32 irqmask;
+static struct clock_event_device clkevt;
+static struct regmap *regmap_st;
+static int timer_latch;
+
+/*
+ * The ST_CRTR is updated asynchronously to the master clock ... but
+ * the updates as seen by the CPU don't seem to be strictly monotonic.
+ * Waiting until we read the same value twice avoids glitching.
+ */
+static inline unsigned long read_CRTR(void)
+{
+ unsigned int x1, x2;
+
+ regmap_read(regmap_st, AT91_ST_CRTR, &x1);
+ do {
+ regmap_read(regmap_st, AT91_ST_CRTR, &x2);
+ if (x1 == x2)
+ break;
+ x1 = x2;
+ } while (1);
+ return x1;
+}
+
+/*
+ * IRQ handler for the timer.
+ */
+static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
+{
+ u32 sr;
+
+ regmap_read(regmap_st, AT91_ST_SR, &sr);
+ sr &= irqmask;
+
+ /*
+ * irqs should be disabled here, but as the irq is shared they are only
+ * guaranteed to be off if the timer irq is registered first.
+ */
+ WARN_ON_ONCE(!irqs_disabled());
+
+ /* simulate "oneshot" timer with alarm */
+ if (sr & AT91_ST_ALMS) {
+ clkevt.event_handler(&clkevt);
+ return IRQ_HANDLED;
+ }
+
+ /* periodic mode should handle delayed ticks */
+ if (sr & AT91_ST_PITS) {
+ u32 crtr = read_CRTR();
+
+ while (((crtr - last_crtr) & AT91_ST_CRTV) >= timer_latch) {
+ last_crtr += timer_latch;
+ clkevt.event_handler(&clkevt);
+ }
+ return IRQ_HANDLED;
+ }
+
+ /* this irq is shared ... */
+ return IRQ_NONE;
+}
+
+static u64 read_clk32k(struct clocksource *cs)
+{
+ return read_CRTR();
+}
+
+static struct clocksource clk32k = {
+ .name = "32k_counter",
+ .rating = 150,
+ .read = read_clk32k,
+ .mask = CLOCKSOURCE_MASK(20),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void clkdev32k_disable_and_flush_irq(void)
+{
+ unsigned int val;
+
+ /* Disable and flush pending timer interrupts */
+ regmap_write(regmap_st, AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS);
+ regmap_read(regmap_st, AT91_ST_SR, &val);
+ last_crtr = read_CRTR();
+}
+
+static int clkevt32k_shutdown(struct clock_event_device *evt)
+{
+ clkdev32k_disable_and_flush_irq();
+ irqmask = 0;
+ regmap_write(regmap_st, AT91_ST_IER, irqmask);
+ return 0;
+}
+
+static int clkevt32k_set_oneshot(struct clock_event_device *dev)
+{
+ clkdev32k_disable_and_flush_irq();
+
+ /*
+ * ALM for oneshot irqs, set by next_event()
+ * before 32 seconds have passed.
+ */
+ irqmask = AT91_ST_ALMS;
+ regmap_write(regmap_st, AT91_ST_RTAR, last_crtr);
+ regmap_write(regmap_st, AT91_ST_IER, irqmask);
+ return 0;
+}
+
+static int clkevt32k_set_periodic(struct clock_event_device *dev)
+{
+ clkdev32k_disable_and_flush_irq();
+
+ /* PIT for periodic irqs; fixed rate of 1/HZ */
+ irqmask = AT91_ST_PITS;
+ regmap_write(regmap_st, AT91_ST_PIMR, timer_latch);
+ regmap_write(regmap_st, AT91_ST_IER, irqmask);
+ return 0;
+}
+
+static int
+clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
+{
+ u32 alm;
+ unsigned int val;
+
+ BUG_ON(delta < 2);
+
+ /* The alarm IRQ uses absolute time (now+delta), not the relative
+ * time (delta) in our calling convention. Like all clockevents
+ * using such "match" hardware, we have a race to defend against.
+ *
+ * Our defense here is to have set up the clockevent device so the
+ * delta is at least two. That way we never end up writing RTAR
+ * with the value then held in CRTR ... which would mean the match
+ * wouldn't trigger until 32 seconds later, after CRTR wraps.
+ */
+ alm = read_CRTR();
+
+ /* Cancel any pending alarm; flush any pending IRQ */
+ regmap_write(regmap_st, AT91_ST_RTAR, alm);
+ regmap_read(regmap_st, AT91_ST_SR, &val);
+
+ /* Schedule alarm by writing RTAR. */
+ alm += delta;
+ regmap_write(regmap_st, AT91_ST_RTAR, alm);
+
+ return 0;
+}
+
+static struct clock_event_device clkevt = {
+ .name = "at91_tick",
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 150,
+ .set_next_event = clkevt32k_next_event,
+ .set_state_shutdown = clkevt32k_shutdown,
+ .set_state_periodic = clkevt32k_set_periodic,
+ .set_state_oneshot = clkevt32k_set_oneshot,
+ .tick_resume = clkevt32k_shutdown,
+};
+
+/*
+ * ST (system timer) module supports both clockevents and clocksource.
+ */
+static int __init atmel_st_timer_init(struct device_node *node)
+{
+ struct clk *sclk;
+ unsigned int sclk_rate, val;
+ int irq, ret;
+
+ regmap_st = syscon_node_to_regmap(node);
+ if (IS_ERR(regmap_st)) {
+ pr_err("Unable to get regmap\n");
+ return PTR_ERR(regmap_st);
+ }
+
+ /* Disable all timer interrupts, and clear any pending ones */
+ regmap_write(regmap_st, AT91_ST_IDR,
+ AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
+ regmap_read(regmap_st, AT91_ST_SR, &val);
+
+ /* Get the interrupts property */
+ irq = irq_of_parse_and_map(node, 0);
+ if (!irq) {
+ pr_err("Unable to get IRQ from DT\n");
+ return -EINVAL;
+ }
+
+ /* Make IRQs happen for the system timer */
+ ret = request_irq(irq, at91rm9200_timer_interrupt,
+ IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
+ "at91_tick", regmap_st);
+ if (ret) {
+ pr_err("Unable to setup IRQ\n");
+ return ret;
+ }
+
+ sclk = of_clk_get(node, 0);
+ if (IS_ERR(sclk)) {
+ pr_err("Unable to get slow clock\n");
+ return PTR_ERR(sclk);
+ }
+
+ ret = clk_prepare_enable(sclk);
+ if (ret) {
+ pr_err("Could not enable slow clock\n");
+ return ret;
+ }
+
+ sclk_rate = clk_get_rate(sclk);
+ if (!sclk_rate) {
+ pr_err("Invalid slow clock rate\n");
+ return -EINVAL;
+ }
+ timer_latch = (sclk_rate + HZ / 2) / HZ;
+
+ /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
+ * directly for the clocksource and all clockevents, after adjusting
+ * its prescaler from the 1 Hz default.
+ */
+ regmap_write(regmap_st, AT91_ST_RTMR, 1);
+
+ /* Setup timer clockevent, with minimum of two ticks (important!!) */
+ clkevt.cpumask = cpumask_of(0);
+ clockevents_config_and_register(&clkevt, sclk_rate,
+ 2, AT91_ST_ALMV);
+
+ /* register clocksource */
+ return clocksource_register_hz(&clk32k, sclk_rate);
+}
+TIMER_OF_DECLARE(atmel_st_timer, "atmel,at91rm9200-st",
+ atmel_st_timer_init);
diff --git a/drivers/clocksource/timer-atmel-tcb.c b/drivers/clocksource/timer-atmel-tcb.c
new file mode 100644
index 0000000000..2a90c92a91
--- /dev/null
+++ b/drivers/clocksource/timer-atmel-tcb.c
@@ -0,0 +1,511 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/init.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <linux/syscore_ops.h>
+#include <soc/at91/atmel_tcb.h>
+
+
+/*
+ * We're configured to use a specific TC block, one that's not hooked
+ * up to external hardware, to provide a time solution:
+ *
+ * - Two channels combine to create a free-running 32 bit counter
+ * with a base rate of 5+ MHz, packaged as a clocksource (with
+ * resolution better than 200 nsec).
+ * - Some chips support 32 bit counter. A single channel is used for
+ * this 32 bit free-running counter. the second channel is not used.
+ *
+ * - The third channel may be used to provide a clockevent source, used in
+ * either periodic or oneshot mode. For 16-bit counter its runs at 32 KiHZ,
+ * and can handle delays of up to two seconds. For 32-bit counters, it runs at
+ * the same rate as the clocksource
+ *
+ * REVISIT behavior during system suspend states... we should disable
+ * all clocks and save the power. Easily done for clockevent devices,
+ * but clocksources won't necessarily get the needed notifications.
+ * For deeper system sleep states, this will be mandatory...
+ */
+
+static void __iomem *tcaddr;
+static struct
+{
+ u32 cmr;
+ u32 imr;
+ u32 rc;
+ bool clken;
+} tcb_cache[3];
+static u32 bmr_cache;
+
+static const u8 atmel_tcb_divisors[] = { 2, 8, 32, 128 };
+
+static u64 tc_get_cycles(struct clocksource *cs)
+{
+ unsigned long flags;
+ u32 lower, upper;
+
+ raw_local_irq_save(flags);
+ do {
+ upper = readl_relaxed(tcaddr + ATMEL_TC_REG(1, CV));
+ lower = readl_relaxed(tcaddr + ATMEL_TC_REG(0, CV));
+ } while (upper != readl_relaxed(tcaddr + ATMEL_TC_REG(1, CV)));
+
+ raw_local_irq_restore(flags);
+ return (upper << 16) | lower;
+}
+
+static u64 tc_get_cycles32(struct clocksource *cs)
+{
+ return readl_relaxed(tcaddr + ATMEL_TC_REG(0, CV));
+}
+
+static void tc_clksrc_suspend(struct clocksource *cs)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(tcb_cache); i++) {
+ tcb_cache[i].cmr = readl(tcaddr + ATMEL_TC_REG(i, CMR));
+ tcb_cache[i].imr = readl(tcaddr + ATMEL_TC_REG(i, IMR));
+ tcb_cache[i].rc = readl(tcaddr + ATMEL_TC_REG(i, RC));
+ tcb_cache[i].clken = !!(readl(tcaddr + ATMEL_TC_REG(i, SR)) &
+ ATMEL_TC_CLKSTA);
+ }
+
+ bmr_cache = readl(tcaddr + ATMEL_TC_BMR);
+}
+
+static void tc_clksrc_resume(struct clocksource *cs)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(tcb_cache); i++) {
+ /* Restore registers for the channel, RA and RB are not used */
+ writel(tcb_cache[i].cmr, tcaddr + ATMEL_TC_REG(i, CMR));
+ writel(tcb_cache[i].rc, tcaddr + ATMEL_TC_REG(i, RC));
+ writel(0, tcaddr + ATMEL_TC_REG(i, RA));
+ writel(0, tcaddr + ATMEL_TC_REG(i, RB));
+ /* Disable all the interrupts */
+ writel(0xff, tcaddr + ATMEL_TC_REG(i, IDR));
+ /* Reenable interrupts that were enabled before suspending */
+ writel(tcb_cache[i].imr, tcaddr + ATMEL_TC_REG(i, IER));
+ /* Start the clock if it was used */
+ if (tcb_cache[i].clken)
+ writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(i, CCR));
+ }
+
+ /* Dual channel, chain channels */
+ writel(bmr_cache, tcaddr + ATMEL_TC_BMR);
+ /* Finally, trigger all the channels*/
+ writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
+}
+
+static struct clocksource clksrc = {
+ .rating = 200,
+ .read = tc_get_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .suspend = tc_clksrc_suspend,
+ .resume = tc_clksrc_resume,
+};
+
+static u64 notrace tc_sched_clock_read(void)
+{
+ return tc_get_cycles(&clksrc);
+}
+
+static u64 notrace tc_sched_clock_read32(void)
+{
+ return tc_get_cycles32(&clksrc);
+}
+
+static struct delay_timer tc_delay_timer;
+
+static unsigned long tc_delay_timer_read(void)
+{
+ return tc_get_cycles(&clksrc);
+}
+
+static unsigned long notrace tc_delay_timer_read32(void)
+{
+ return tc_get_cycles32(&clksrc);
+}
+
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+
+struct tc_clkevt_device {
+ struct clock_event_device clkevt;
+ struct clk *clk;
+ u32 rate;
+ void __iomem *regs;
+};
+
+static struct tc_clkevt_device *to_tc_clkevt(struct clock_event_device *clkevt)
+{
+ return container_of(clkevt, struct tc_clkevt_device, clkevt);
+}
+
+static u32 timer_clock;
+
+static int tc_shutdown(struct clock_event_device *d)
+{
+ struct tc_clkevt_device *tcd = to_tc_clkevt(d);
+ void __iomem *regs = tcd->regs;
+
+ writel(0xff, regs + ATMEL_TC_REG(2, IDR));
+ writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR));
+ if (!clockevent_state_detached(d))
+ clk_disable(tcd->clk);
+
+ return 0;
+}
+
+static int tc_set_oneshot(struct clock_event_device *d)
+{
+ struct tc_clkevt_device *tcd = to_tc_clkevt(d);
+ void __iomem *regs = tcd->regs;
+
+ if (clockevent_state_oneshot(d) || clockevent_state_periodic(d))
+ tc_shutdown(d);
+
+ clk_enable(tcd->clk);
+
+ /* count up to RC, then irq and stop */
+ writel(timer_clock | ATMEL_TC_CPCSTOP | ATMEL_TC_WAVE |
+ ATMEL_TC_WAVESEL_UP_AUTO, regs + ATMEL_TC_REG(2, CMR));
+ writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
+
+ /* set_next_event() configures and starts the timer */
+ return 0;
+}
+
+static int tc_set_periodic(struct clock_event_device *d)
+{
+ struct tc_clkevt_device *tcd = to_tc_clkevt(d);
+ void __iomem *regs = tcd->regs;
+
+ if (clockevent_state_oneshot(d) || clockevent_state_periodic(d))
+ tc_shutdown(d);
+
+ /* By not making the gentime core emulate periodic mode on top
+ * of oneshot, we get lower overhead and improved accuracy.
+ */
+ clk_enable(tcd->clk);
+
+ /* count up to RC, then irq and restart */
+ writel(timer_clock | ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
+ regs + ATMEL_TC_REG(2, CMR));
+ writel((tcd->rate + HZ / 2) / HZ, tcaddr + ATMEL_TC_REG(2, RC));
+
+ /* Enable clock and interrupts on RC compare */
+ writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
+
+ /* go go gadget! */
+ writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG, regs +
+ ATMEL_TC_REG(2, CCR));
+ return 0;
+}
+
+static int tc_next_event(unsigned long delta, struct clock_event_device *d)
+{
+ writel_relaxed(delta, tcaddr + ATMEL_TC_REG(2, RC));
+
+ /* go go gadget! */
+ writel_relaxed(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
+ tcaddr + ATMEL_TC_REG(2, CCR));
+ return 0;
+}
+
+static struct tc_clkevt_device clkevt = {
+ .clkevt = {
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ /* Should be lower than at91rm9200's system timer */
+ .rating = 125,
+ .set_next_event = tc_next_event,
+ .set_state_shutdown = tc_shutdown,
+ .set_state_periodic = tc_set_periodic,
+ .set_state_oneshot = tc_set_oneshot,
+ },
+};
+
+static irqreturn_t ch2_irq(int irq, void *handle)
+{
+ struct tc_clkevt_device *dev = handle;
+ unsigned int sr;
+
+ sr = readl_relaxed(dev->regs + ATMEL_TC_REG(2, SR));
+ if (sr & ATMEL_TC_CPCS) {
+ dev->clkevt.event_handler(&dev->clkevt);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+static int __init setup_clkevents(struct atmel_tc *tc, int divisor_idx)
+{
+ int ret;
+ struct clk *t2_clk = tc->clk[2];
+ int irq = tc->irq[2];
+ int bits = tc->tcb_config->counter_width;
+
+ /* try to enable t2 clk to avoid future errors in mode change */
+ ret = clk_prepare_enable(t2_clk);
+ if (ret)
+ return ret;
+
+ clkevt.regs = tc->regs;
+ clkevt.clk = t2_clk;
+
+ if (bits == 32) {
+ timer_clock = divisor_idx;
+ clkevt.rate = clk_get_rate(t2_clk) / atmel_tcb_divisors[divisor_idx];
+ } else {
+ ret = clk_prepare_enable(tc->slow_clk);
+ if (ret) {
+ clk_disable_unprepare(t2_clk);
+ return ret;
+ }
+
+ clkevt.rate = clk_get_rate(tc->slow_clk);
+ timer_clock = ATMEL_TC_TIMER_CLOCK5;
+ }
+
+ clk_disable(t2_clk);
+
+ clkevt.clkevt.cpumask = cpumask_of(0);
+
+ ret = request_irq(irq, ch2_irq, IRQF_TIMER, "tc_clkevt", &clkevt);
+ if (ret) {
+ clk_unprepare(t2_clk);
+ if (bits != 32)
+ clk_disable_unprepare(tc->slow_clk);
+ return ret;
+ }
+
+ clockevents_config_and_register(&clkevt.clkevt, clkevt.rate, 1, BIT(bits) - 1);
+
+ return ret;
+}
+
+#else /* !CONFIG_GENERIC_CLOCKEVENTS */
+
+static int __init setup_clkevents(struct atmel_tc *tc, int divisor_idx)
+{
+ /* NOTHING */
+ return 0;
+}
+
+#endif
+
+static void __init tcb_setup_dual_chan(struct atmel_tc *tc, int mck_divisor_idx)
+{
+ /* channel 0: waveform mode, input mclk/8, clock TIOA0 on overflow */
+ writel(mck_divisor_idx /* likely divide-by-8 */
+ | ATMEL_TC_WAVE
+ | ATMEL_TC_WAVESEL_UP /* free-run */
+ | ATMEL_TC_ASWTRG_SET /* TIOA0 rises at software trigger */
+ | ATMEL_TC_ACPA_SET /* TIOA0 rises at 0 */
+ | ATMEL_TC_ACPC_CLEAR, /* (duty cycle 50%) */
+ tcaddr + ATMEL_TC_REG(0, CMR));
+ writel(0x0000, tcaddr + ATMEL_TC_REG(0, RA));
+ writel(0x8000, tcaddr + ATMEL_TC_REG(0, RC));
+ writel(0xff, tcaddr + ATMEL_TC_REG(0, IDR)); /* no irqs */
+ writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(0, CCR));
+
+ /* channel 1: waveform mode, input TIOA0 */
+ writel(ATMEL_TC_XC1 /* input: TIOA0 */
+ | ATMEL_TC_WAVE
+ | ATMEL_TC_WAVESEL_UP, /* free-run */
+ tcaddr + ATMEL_TC_REG(1, CMR));
+ writel(0xff, tcaddr + ATMEL_TC_REG(1, IDR)); /* no irqs */
+ writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(1, CCR));
+
+ /* chain channel 0 to channel 1*/
+ writel(ATMEL_TC_TC1XC1S_TIOA0, tcaddr + ATMEL_TC_BMR);
+ /* then reset all the timers */
+ writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
+}
+
+static void __init tcb_setup_single_chan(struct atmel_tc *tc, int mck_divisor_idx)
+{
+ /* channel 0: waveform mode, input mclk/8 */
+ writel(mck_divisor_idx /* likely divide-by-8 */
+ | ATMEL_TC_WAVE
+ | ATMEL_TC_WAVESEL_UP, /* free-run */
+ tcaddr + ATMEL_TC_REG(0, CMR));
+ writel(0xff, tcaddr + ATMEL_TC_REG(0, IDR)); /* no irqs */
+ writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(0, CCR));
+
+ /* then reset all the timers */
+ writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
+}
+
+static struct atmel_tcb_config tcb_rm9200_config = {
+ .counter_width = 16,
+};
+
+static struct atmel_tcb_config tcb_sam9x5_config = {
+ .counter_width = 32,
+};
+
+static struct atmel_tcb_config tcb_sama5d2_config = {
+ .counter_width = 32,
+ .has_gclk = 1,
+};
+
+static const struct of_device_id atmel_tcb_of_match[] = {
+ { .compatible = "atmel,at91rm9200-tcb", .data = &tcb_rm9200_config, },
+ { .compatible = "atmel,at91sam9x5-tcb", .data = &tcb_sam9x5_config, },
+ { .compatible = "atmel,sama5d2-tcb", .data = &tcb_sama5d2_config, },
+ { /* sentinel */ }
+};
+
+static int __init tcb_clksrc_init(struct device_node *node)
+{
+ struct atmel_tc tc;
+ struct clk *t0_clk;
+ const struct of_device_id *match;
+ u64 (*tc_sched_clock)(void);
+ u32 rate, divided_rate = 0;
+ int best_divisor_idx = -1;
+ int bits;
+ int i;
+ int ret;
+
+ /* Protect against multiple calls */
+ if (tcaddr)
+ return 0;
+
+ tc.regs = of_iomap(node->parent, 0);
+ if (!tc.regs)
+ return -ENXIO;
+
+ t0_clk = of_clk_get_by_name(node->parent, "t0_clk");
+ if (IS_ERR(t0_clk))
+ return PTR_ERR(t0_clk);
+
+ tc.slow_clk = of_clk_get_by_name(node->parent, "slow_clk");
+ if (IS_ERR(tc.slow_clk))
+ return PTR_ERR(tc.slow_clk);
+
+ tc.clk[0] = t0_clk;
+ tc.clk[1] = of_clk_get_by_name(node->parent, "t1_clk");
+ if (IS_ERR(tc.clk[1]))
+ tc.clk[1] = t0_clk;
+ tc.clk[2] = of_clk_get_by_name(node->parent, "t2_clk");
+ if (IS_ERR(tc.clk[2]))
+ tc.clk[2] = t0_clk;
+
+ tc.irq[2] = of_irq_get(node->parent, 2);
+ if (tc.irq[2] <= 0) {
+ tc.irq[2] = of_irq_get(node->parent, 0);
+ if (tc.irq[2] <= 0)
+ return -EINVAL;
+ }
+
+ match = of_match_node(atmel_tcb_of_match, node->parent);
+ if (!match)
+ return -ENODEV;
+
+ tc.tcb_config = match->data;
+ bits = tc.tcb_config->counter_width;
+
+ for (i = 0; i < ARRAY_SIZE(tc.irq); i++)
+ writel(ATMEL_TC_ALL_IRQ, tc.regs + ATMEL_TC_REG(i, IDR));
+
+ ret = clk_prepare_enable(t0_clk);
+ if (ret) {
+ pr_debug("can't enable T0 clk\n");
+ return ret;
+ }
+
+ /* How fast will we be counting? Pick something over 5 MHz. */
+ rate = (u32) clk_get_rate(t0_clk);
+ i = 0;
+ if (tc.tcb_config->has_gclk)
+ i = 1;
+ for (; i < ARRAY_SIZE(atmel_tcb_divisors); i++) {
+ unsigned divisor = atmel_tcb_divisors[i];
+ unsigned tmp;
+
+ tmp = rate / divisor;
+ pr_debug("TC: %u / %-3u [%d] --> %u\n", rate, divisor, i, tmp);
+ if ((best_divisor_idx >= 0) && (tmp < 5 * 1000 * 1000))
+ break;
+ divided_rate = tmp;
+ best_divisor_idx = i;
+ }
+
+ clksrc.name = kbasename(node->parent->full_name);
+ clkevt.clkevt.name = kbasename(node->parent->full_name);
+ pr_debug("%s at %d.%03d MHz\n", clksrc.name, divided_rate / 1000000,
+ ((divided_rate % 1000000) + 500) / 1000);
+
+ tcaddr = tc.regs;
+
+ if (bits == 32) {
+ /* use appropriate function to read 32 bit counter */
+ clksrc.read = tc_get_cycles32;
+ /* setup only channel 0 */
+ tcb_setup_single_chan(&tc, best_divisor_idx);
+ tc_sched_clock = tc_sched_clock_read32;
+ tc_delay_timer.read_current_timer = tc_delay_timer_read32;
+ } else {
+ /* we have three clocks no matter what the
+ * underlying platform supports.
+ */
+ ret = clk_prepare_enable(tc.clk[1]);
+ if (ret) {
+ pr_debug("can't enable T1 clk\n");
+ goto err_disable_t0;
+ }
+ /* setup both channel 0 & 1 */
+ tcb_setup_dual_chan(&tc, best_divisor_idx);
+ tc_sched_clock = tc_sched_clock_read;
+ tc_delay_timer.read_current_timer = tc_delay_timer_read;
+ }
+
+ /* and away we go! */
+ ret = clocksource_register_hz(&clksrc, divided_rate);
+ if (ret)
+ goto err_disable_t1;
+
+ /* channel 2: periodic and oneshot timer support */
+ ret = setup_clkevents(&tc, best_divisor_idx);
+ if (ret)
+ goto err_unregister_clksrc;
+
+ sched_clock_register(tc_sched_clock, 32, divided_rate);
+
+ tc_delay_timer.freq = divided_rate;
+ register_current_timer_delay(&tc_delay_timer);
+
+ return 0;
+
+err_unregister_clksrc:
+ clocksource_unregister(&clksrc);
+
+err_disable_t1:
+ if (bits != 32)
+ clk_disable_unprepare(tc.clk[1]);
+
+err_disable_t0:
+ clk_disable_unprepare(t0_clk);
+
+ tcaddr = NULL;
+
+ return ret;
+}
+TIMER_OF_DECLARE(atmel_tcb_clksrc, "atmel,tcb-timer", tcb_clksrc_init);
diff --git a/drivers/clocksource/timer-cadence-ttc.c b/drivers/clocksource/timer-cadence-ttc.c
new file mode 100644
index 0000000000..32daaac9b1
--- /dev/null
+++ b/drivers/clocksource/timer-cadence-ttc.c
@@ -0,0 +1,553 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * This file contains driver for the Cadence Triple Timer Counter Rev 06
+ *
+ * Copyright (C) 2011-2013 Xilinx
+ *
+ * based on arch/mips/kernel/time.c timer driver
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sched_clock.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+
+/*
+ * This driver configures the 2 16/32-bit count-up timers as follows:
+ *
+ * T1: Timer 1, clocksource for generic timekeeping
+ * T2: Timer 2, clockevent source for hrtimers
+ * T3: Timer 3, <unused>
+ *
+ * The input frequency to the timer module for emulation is 2.5MHz which is
+ * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32,
+ * the timers are clocked at 78.125KHz (12.8 us resolution).
+
+ * The input frequency to the timer module in silicon is configurable and
+ * obtained from device tree. The pre-scaler of 32 is used.
+ */
+
+/*
+ * Timer Register Offset Definitions of Timer 1, Increment base address by 4
+ * and use same offsets for Timer 2
+ */
+#define TTC_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */
+#define TTC_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */
+#define TTC_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */
+#define TTC_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */
+#define TTC_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */
+#define TTC_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */
+
+#define TTC_CNT_CNTRL_DISABLE_MASK 0x1
+
+#define TTC_CLK_CNTRL_CSRC_MASK (1 << 5) /* clock source */
+#define TTC_CLK_CNTRL_PSV_MASK 0x1e
+#define TTC_CLK_CNTRL_PSV_SHIFT 1
+
+/*
+ * Setup the timers to use pre-scaling, using a fixed value for now that will
+ * work across most input frequency, but it may need to be more dynamic
+ */
+#define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */
+#define PRESCALE 2048 /* The exponent must match this */
+#define CLK_CNTRL_PRESCALE ((PRESCALE_EXPONENT - 1) << 1)
+#define CLK_CNTRL_PRESCALE_EN 1
+#define CNT_CNTRL_RESET (1 << 4)
+
+#define MAX_F_ERR 50
+
+/**
+ * struct ttc_timer - This definition defines local timer structure
+ *
+ * @base_addr: Base address of timer
+ * @freq: Timer input clock frequency
+ * @clk: Associated clock source
+ * @clk_rate_change_nb Notifier block for clock rate changes
+ */
+struct ttc_timer {
+ void __iomem *base_addr;
+ unsigned long freq;
+ struct clk *clk;
+ struct notifier_block clk_rate_change_nb;
+};
+
+#define to_ttc_timer(x) \
+ container_of(x, struct ttc_timer, clk_rate_change_nb)
+
+struct ttc_timer_clocksource {
+ u32 scale_clk_ctrl_reg_old;
+ u32 scale_clk_ctrl_reg_new;
+ struct ttc_timer ttc;
+ struct clocksource cs;
+};
+
+#define to_ttc_timer_clksrc(x) \
+ container_of(x, struct ttc_timer_clocksource, cs)
+
+struct ttc_timer_clockevent {
+ struct ttc_timer ttc;
+ struct clock_event_device ce;
+};
+
+#define to_ttc_timer_clkevent(x) \
+ container_of(x, struct ttc_timer_clockevent, ce)
+
+static void __iomem *ttc_sched_clock_val_reg;
+
+/**
+ * ttc_set_interval - Set the timer interval value
+ *
+ * @timer: Pointer to the timer instance
+ * @cycles: Timer interval ticks
+ **/
+static void ttc_set_interval(struct ttc_timer *timer,
+ unsigned long cycles)
+{
+ u32 ctrl_reg;
+
+ /* Disable the counter, set the counter value and re-enable counter */
+ ctrl_reg = readl_relaxed(timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+ ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK;
+ writel_relaxed(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+
+ writel_relaxed(cycles, timer->base_addr + TTC_INTR_VAL_OFFSET);
+
+ /*
+ * Reset the counter (0x10) so that it starts from 0, one-shot
+ * mode makes this needed for timing to be right.
+ */
+ ctrl_reg |= CNT_CNTRL_RESET;
+ ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
+ writel_relaxed(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+}
+
+/**
+ * ttc_clock_event_interrupt - Clock event timer interrupt handler
+ *
+ * @irq: IRQ number of the Timer
+ * @dev_id: void pointer to the ttc_timer instance
+ *
+ * returns: Always IRQ_HANDLED - success
+ **/
+static irqreturn_t ttc_clock_event_interrupt(int irq, void *dev_id)
+{
+ struct ttc_timer_clockevent *ttce = dev_id;
+ struct ttc_timer *timer = &ttce->ttc;
+
+ /* Acknowledge the interrupt and call event handler */
+ readl_relaxed(timer->base_addr + TTC_ISR_OFFSET);
+
+ ttce->ce.event_handler(&ttce->ce);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * __ttc_clocksource_read - Reads the timer counter register
+ *
+ * returns: Current timer counter register value
+ **/
+static u64 __ttc_clocksource_read(struct clocksource *cs)
+{
+ struct ttc_timer *timer = &to_ttc_timer_clksrc(cs)->ttc;
+
+ return (u64)readl_relaxed(timer->base_addr +
+ TTC_COUNT_VAL_OFFSET);
+}
+
+static u64 notrace ttc_sched_clock_read(void)
+{
+ return readl_relaxed(ttc_sched_clock_val_reg);
+}
+
+/**
+ * ttc_set_next_event - Sets the time interval for next event
+ *
+ * @cycles: Timer interval ticks
+ * @evt: Address of clock event instance
+ *
+ * returns: Always 0 - success
+ **/
+static int ttc_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
+ struct ttc_timer *timer = &ttce->ttc;
+
+ ttc_set_interval(timer, cycles);
+ return 0;
+}
+
+/**
+ * ttc_set_{shutdown|oneshot|periodic} - Sets the state of timer
+ *
+ * @evt: Address of clock event instance
+ **/
+static int ttc_shutdown(struct clock_event_device *evt)
+{
+ struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
+ struct ttc_timer *timer = &ttce->ttc;
+ u32 ctrl_reg;
+
+ ctrl_reg = readl_relaxed(timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+ ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK;
+ writel_relaxed(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+ return 0;
+}
+
+static int ttc_set_periodic(struct clock_event_device *evt)
+{
+ struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
+ struct ttc_timer *timer = &ttce->ttc;
+
+ ttc_set_interval(timer,
+ DIV_ROUND_CLOSEST(ttce->ttc.freq, PRESCALE * HZ));
+ return 0;
+}
+
+static int ttc_resume(struct clock_event_device *evt)
+{
+ struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
+ struct ttc_timer *timer = &ttce->ttc;
+ u32 ctrl_reg;
+
+ ctrl_reg = readl_relaxed(timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+ ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
+ writel_relaxed(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+ return 0;
+}
+
+static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct clk_notifier_data *ndata = data;
+ struct ttc_timer *ttc = to_ttc_timer(nb);
+ struct ttc_timer_clocksource *ttccs = container_of(ttc,
+ struct ttc_timer_clocksource, ttc);
+
+ switch (event) {
+ case PRE_RATE_CHANGE:
+ {
+ u32 psv;
+ unsigned long factor, rate_low, rate_high;
+
+ if (ndata->new_rate > ndata->old_rate) {
+ factor = DIV_ROUND_CLOSEST(ndata->new_rate,
+ ndata->old_rate);
+ rate_low = ndata->old_rate;
+ rate_high = ndata->new_rate;
+ } else {
+ factor = DIV_ROUND_CLOSEST(ndata->old_rate,
+ ndata->new_rate);
+ rate_low = ndata->new_rate;
+ rate_high = ndata->old_rate;
+ }
+
+ if (!is_power_of_2(factor))
+ return NOTIFY_BAD;
+
+ if (abs(rate_high - (factor * rate_low)) > MAX_F_ERR)
+ return NOTIFY_BAD;
+
+ factor = __ilog2_u32(factor);
+
+ /*
+ * store timer clock ctrl register so we can restore it in case
+ * of an abort.
+ */
+ ttccs->scale_clk_ctrl_reg_old =
+ readl_relaxed(ttccs->ttc.base_addr +
+ TTC_CLK_CNTRL_OFFSET);
+
+ psv = (ttccs->scale_clk_ctrl_reg_old &
+ TTC_CLK_CNTRL_PSV_MASK) >>
+ TTC_CLK_CNTRL_PSV_SHIFT;
+ if (ndata->new_rate < ndata->old_rate)
+ psv -= factor;
+ else
+ psv += factor;
+
+ /* prescaler within legal range? */
+ if (psv & ~(TTC_CLK_CNTRL_PSV_MASK >> TTC_CLK_CNTRL_PSV_SHIFT))
+ return NOTIFY_BAD;
+
+ ttccs->scale_clk_ctrl_reg_new = ttccs->scale_clk_ctrl_reg_old &
+ ~TTC_CLK_CNTRL_PSV_MASK;
+ ttccs->scale_clk_ctrl_reg_new |= psv << TTC_CLK_CNTRL_PSV_SHIFT;
+
+
+ /* scale down: adjust divider in post-change notification */
+ if (ndata->new_rate < ndata->old_rate)
+ return NOTIFY_DONE;
+
+ /* scale up: adjust divider now - before frequency change */
+ writel_relaxed(ttccs->scale_clk_ctrl_reg_new,
+ ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+ break;
+ }
+ case POST_RATE_CHANGE:
+ /* scale up: pre-change notification did the adjustment */
+ if (ndata->new_rate > ndata->old_rate)
+ return NOTIFY_OK;
+
+ /* scale down: adjust divider now - after frequency change */
+ writel_relaxed(ttccs->scale_clk_ctrl_reg_new,
+ ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+ break;
+
+ case ABORT_RATE_CHANGE:
+ /* we have to undo the adjustment in case we scale up */
+ if (ndata->new_rate < ndata->old_rate)
+ return NOTIFY_OK;
+
+ /* restore original register value */
+ writel_relaxed(ttccs->scale_clk_ctrl_reg_old,
+ ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+ fallthrough;
+ default:
+ return NOTIFY_DONE;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static int __init ttc_setup_clocksource(struct clk *clk, void __iomem *base,
+ u32 timer_width)
+{
+ struct ttc_timer_clocksource *ttccs;
+ int err;
+
+ ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL);
+ if (!ttccs)
+ return -ENOMEM;
+
+ ttccs->ttc.clk = clk;
+
+ err = clk_prepare_enable(ttccs->ttc.clk);
+ if (err) {
+ kfree(ttccs);
+ return err;
+ }
+
+ ttccs->ttc.freq = clk_get_rate(ttccs->ttc.clk);
+
+ ttccs->ttc.clk_rate_change_nb.notifier_call =
+ ttc_rate_change_clocksource_cb;
+ ttccs->ttc.clk_rate_change_nb.next = NULL;
+
+ err = clk_notifier_register(ttccs->ttc.clk,
+ &ttccs->ttc.clk_rate_change_nb);
+ if (err)
+ pr_warn("Unable to register clock notifier.\n");
+
+ ttccs->ttc.base_addr = base;
+ ttccs->cs.name = "ttc_clocksource";
+ ttccs->cs.rating = 200;
+ ttccs->cs.read = __ttc_clocksource_read;
+ ttccs->cs.mask = CLOCKSOURCE_MASK(timer_width);
+ ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ /*
+ * Setup the clock source counter to be an incrementing counter
+ * with no interrupt and it rolls over at 0xFFFF. Pre-scale
+ * it by 32 also. Let it start running now.
+ */
+ writel_relaxed(0x0, ttccs->ttc.base_addr + TTC_IER_OFFSET);
+ writel_relaxed(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
+ ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+ writel_relaxed(CNT_CNTRL_RESET,
+ ttccs->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
+
+ err = clocksource_register_hz(&ttccs->cs, ttccs->ttc.freq / PRESCALE);
+ if (err) {
+ kfree(ttccs);
+ return err;
+ }
+
+ ttc_sched_clock_val_reg = base + TTC_COUNT_VAL_OFFSET;
+ sched_clock_register(ttc_sched_clock_read, timer_width,
+ ttccs->ttc.freq / PRESCALE);
+
+ return 0;
+}
+
+static int ttc_rate_change_clockevent_cb(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct clk_notifier_data *ndata = data;
+ struct ttc_timer *ttc = to_ttc_timer(nb);
+ struct ttc_timer_clockevent *ttcce = container_of(ttc,
+ struct ttc_timer_clockevent, ttc);
+
+ switch (event) {
+ case POST_RATE_CHANGE:
+ /* update cached frequency */
+ ttc->freq = ndata->new_rate;
+
+ clockevents_update_freq(&ttcce->ce, ndata->new_rate / PRESCALE);
+
+ fallthrough;
+ case PRE_RATE_CHANGE:
+ case ABORT_RATE_CHANGE:
+ default:
+ return NOTIFY_DONE;
+ }
+}
+
+static int __init ttc_setup_clockevent(struct clk *clk,
+ void __iomem *base, u32 irq)
+{
+ struct ttc_timer_clockevent *ttcce;
+ int err;
+
+ ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL);
+ if (!ttcce)
+ return -ENOMEM;
+
+ ttcce->ttc.clk = clk;
+
+ err = clk_prepare_enable(ttcce->ttc.clk);
+ if (err)
+ goto out_kfree;
+
+ ttcce->ttc.clk_rate_change_nb.notifier_call =
+ ttc_rate_change_clockevent_cb;
+ ttcce->ttc.clk_rate_change_nb.next = NULL;
+
+ err = clk_notifier_register(ttcce->ttc.clk,
+ &ttcce->ttc.clk_rate_change_nb);
+ if (err) {
+ pr_warn("Unable to register clock notifier.\n");
+ goto out_kfree;
+ }
+
+ ttcce->ttc.freq = clk_get_rate(ttcce->ttc.clk);
+
+ ttcce->ttc.base_addr = base;
+ ttcce->ce.name = "ttc_clockevent";
+ ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ ttcce->ce.set_next_event = ttc_set_next_event;
+ ttcce->ce.set_state_shutdown = ttc_shutdown;
+ ttcce->ce.set_state_periodic = ttc_set_periodic;
+ ttcce->ce.set_state_oneshot = ttc_shutdown;
+ ttcce->ce.tick_resume = ttc_resume;
+ ttcce->ce.rating = 200;
+ ttcce->ce.irq = irq;
+ ttcce->ce.cpumask = cpu_possible_mask;
+
+ /*
+ * Setup the clock event timer to be an interval timer which
+ * is prescaled by 32 using the interval interrupt. Leave it
+ * disabled for now.
+ */
+ writel_relaxed(0x23, ttcce->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
+ writel_relaxed(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
+ ttcce->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+ writel_relaxed(0x1, ttcce->ttc.base_addr + TTC_IER_OFFSET);
+
+ err = request_irq(irq, ttc_clock_event_interrupt,
+ IRQF_TIMER, ttcce->ce.name, ttcce);
+ if (err)
+ goto out_kfree;
+
+ clockevents_config_and_register(&ttcce->ce,
+ ttcce->ttc.freq / PRESCALE, 1, 0xfffe);
+
+ return 0;
+
+out_kfree:
+ kfree(ttcce);
+ return err;
+}
+
+static int __init ttc_timer_probe(struct platform_device *pdev)
+{
+ unsigned int irq;
+ void __iomem *timer_baseaddr;
+ struct clk *clk_cs, *clk_ce;
+ static int initialized;
+ int clksel, ret;
+ u32 timer_width = 16;
+ struct device_node *timer = pdev->dev.of_node;
+
+ if (initialized)
+ return 0;
+
+ initialized = 1;
+
+ /*
+ * Get the 1st Triple Timer Counter (TTC) block from the device tree
+ * and use it. Note that the event timer uses the interrupt and it's the
+ * 2nd TTC hence the irq_of_parse_and_map(,1)
+ */
+ timer_baseaddr = devm_of_iomap(&pdev->dev, timer, 0, NULL);
+ if (IS_ERR(timer_baseaddr)) {
+ pr_err("ERROR: invalid timer base address\n");
+ return PTR_ERR(timer_baseaddr);
+ }
+
+ irq = irq_of_parse_and_map(timer, 1);
+ if (irq <= 0) {
+ pr_err("ERROR: invalid interrupt number\n");
+ return -EINVAL;
+ }
+
+ of_property_read_u32(timer, "timer-width", &timer_width);
+
+ clksel = readl_relaxed(timer_baseaddr + TTC_CLK_CNTRL_OFFSET);
+ clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK);
+ clk_cs = of_clk_get(timer, clksel);
+ if (IS_ERR(clk_cs)) {
+ pr_err("ERROR: timer input clock not found\n");
+ return PTR_ERR(clk_cs);
+ }
+
+ clksel = readl_relaxed(timer_baseaddr + 4 + TTC_CLK_CNTRL_OFFSET);
+ clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK);
+ clk_ce = of_clk_get(timer, clksel);
+ if (IS_ERR(clk_ce)) {
+ pr_err("ERROR: timer input clock not found\n");
+ ret = PTR_ERR(clk_ce);
+ goto put_clk_cs;
+ }
+
+ ret = ttc_setup_clocksource(clk_cs, timer_baseaddr, timer_width);
+ if (ret)
+ goto put_clk_ce;
+
+ ret = ttc_setup_clockevent(clk_ce, timer_baseaddr + 4, irq);
+ if (ret)
+ goto put_clk_ce;
+
+ pr_info("%pOFn #0 at %p, irq=%d\n", timer, timer_baseaddr, irq);
+
+ return 0;
+
+put_clk_ce:
+ clk_put(clk_ce);
+put_clk_cs:
+ clk_put(clk_cs);
+ return ret;
+}
+
+static const struct of_device_id ttc_timer_of_match[] = {
+ {.compatible = "cdns,ttc"},
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, ttc_timer_of_match);
+
+static struct platform_driver ttc_timer_driver = {
+ .driver = {
+ .name = "cdns_ttc_timer",
+ .of_match_table = ttc_timer_of_match,
+ },
+};
+builtin_platform_driver_probe(ttc_timer_driver, ttc_timer_probe);
diff --git a/drivers/clocksource/timer-clint.c b/drivers/clocksource/timer-clint.c
new file mode 100644
index 0000000000..9a55e733ae
--- /dev/null
+++ b/drivers/clocksource/timer-clint.c
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ *
+ * Most of the M-mode (i.e. NoMMU) RISC-V systems usually have a
+ * CLINT MMIO timer device.
+ */
+
+#define pr_fmt(fmt) "clint: " fmt
+#include <linux/bitops.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/sched_clock.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/smp.h>
+#include <linux/timex.h>
+
+#ifndef CONFIG_RISCV_M_MODE
+#include <asm/clint.h>
+#endif
+
+#define CLINT_IPI_OFF 0
+#define CLINT_TIMER_CMP_OFF 0x4000
+#define CLINT_TIMER_VAL_OFF 0xbff8
+
+/* CLINT manages IPI and Timer for RISC-V M-mode */
+static u32 __iomem *clint_ipi_base;
+static unsigned int clint_ipi_irq;
+static u64 __iomem *clint_timer_cmp;
+static u64 __iomem *clint_timer_val;
+static unsigned long clint_timer_freq;
+static unsigned int clint_timer_irq;
+
+#ifdef CONFIG_RISCV_M_MODE
+u64 __iomem *clint_time_val;
+EXPORT_SYMBOL(clint_time_val);
+#endif
+
+#ifdef CONFIG_SMP
+static void clint_send_ipi(unsigned int cpu)
+{
+ writel(1, clint_ipi_base + cpuid_to_hartid_map(cpu));
+}
+
+static void clint_clear_ipi(void)
+{
+ writel(0, clint_ipi_base + cpuid_to_hartid_map(smp_processor_id()));
+}
+
+static void clint_ipi_interrupt(struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+
+ chained_irq_enter(chip, desc);
+
+ clint_clear_ipi();
+ ipi_mux_process();
+
+ chained_irq_exit(chip, desc);
+}
+#endif
+
+#ifdef CONFIG_64BIT
+#define clint_get_cycles() readq_relaxed(clint_timer_val)
+#else
+#define clint_get_cycles() readl_relaxed(clint_timer_val)
+#define clint_get_cycles_hi() readl_relaxed(((u32 *)clint_timer_val) + 1)
+#endif
+
+#ifdef CONFIG_64BIT
+static u64 notrace clint_get_cycles64(void)
+{
+ return clint_get_cycles();
+}
+#else /* CONFIG_64BIT */
+static u64 notrace clint_get_cycles64(void)
+{
+ u32 hi, lo;
+
+ do {
+ hi = clint_get_cycles_hi();
+ lo = clint_get_cycles();
+ } while (hi != clint_get_cycles_hi());
+
+ return ((u64)hi << 32) | lo;
+}
+#endif /* CONFIG_64BIT */
+
+static u64 clint_rdtime(struct clocksource *cs)
+{
+ return clint_get_cycles64();
+}
+
+static struct clocksource clint_clocksource = {
+ .name = "clint_clocksource",
+ .rating = 300,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .read = clint_rdtime,
+};
+
+static int clint_clock_next_event(unsigned long delta,
+ struct clock_event_device *ce)
+{
+ void __iomem *r = clint_timer_cmp +
+ cpuid_to_hartid_map(smp_processor_id());
+
+ csr_set(CSR_IE, IE_TIE);
+ writeq_relaxed(clint_get_cycles64() + delta, r);
+ return 0;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, clint_clock_event) = {
+ .name = "clint_clockevent",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 100,
+ .set_next_event = clint_clock_next_event,
+};
+
+static int clint_timer_starting_cpu(unsigned int cpu)
+{
+ struct clock_event_device *ce = per_cpu_ptr(&clint_clock_event, cpu);
+
+ ce->cpumask = cpumask_of(cpu);
+ clockevents_config_and_register(ce, clint_timer_freq, 100, 0x7fffffff);
+
+ enable_percpu_irq(clint_timer_irq,
+ irq_get_trigger_type(clint_timer_irq));
+ enable_percpu_irq(clint_ipi_irq,
+ irq_get_trigger_type(clint_ipi_irq));
+ return 0;
+}
+
+static int clint_timer_dying_cpu(unsigned int cpu)
+{
+ disable_percpu_irq(clint_timer_irq);
+ /*
+ * Don't disable IPI when CPU goes offline because
+ * the masking/unmasking of virtual IPIs is done
+ * via generic IPI-Mux
+ */
+ return 0;
+}
+
+static irqreturn_t clint_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evdev = this_cpu_ptr(&clint_clock_event);
+
+ csr_clear(CSR_IE, IE_TIE);
+ evdev->event_handler(evdev);
+
+ return IRQ_HANDLED;
+}
+
+static int __init clint_timer_init_dt(struct device_node *np)
+{
+ int rc;
+ u32 i, nr_irqs;
+ void __iomem *base;
+ struct of_phandle_args oirq;
+
+ /*
+ * Ensure that CLINT device interrupts are either RV_IRQ_TIMER or
+ * RV_IRQ_SOFT. If it's anything else then we ignore the device.
+ */
+ nr_irqs = of_irq_count(np);
+ for (i = 0; i < nr_irqs; i++) {
+ if (of_irq_parse_one(np, i, &oirq)) {
+ pr_err("%pOFP: failed to parse irq %d.\n", np, i);
+ continue;
+ }
+
+ if ((oirq.args_count != 1) ||
+ (oirq.args[0] != RV_IRQ_TIMER &&
+ oirq.args[0] != RV_IRQ_SOFT)) {
+ pr_err("%pOFP: invalid irq %d (hwirq %d)\n",
+ np, i, oirq.args[0]);
+ return -ENODEV;
+ }
+
+ /* Find parent irq domain and map ipi irq */
+ if (!clint_ipi_irq &&
+ oirq.args[0] == RV_IRQ_SOFT &&
+ irq_find_host(oirq.np))
+ clint_ipi_irq = irq_of_parse_and_map(np, i);
+
+ /* Find parent irq domain and map timer irq */
+ if (!clint_timer_irq &&
+ oirq.args[0] == RV_IRQ_TIMER &&
+ irq_find_host(oirq.np))
+ clint_timer_irq = irq_of_parse_and_map(np, i);
+ }
+
+ /* If CLINT ipi or timer irq not found then fail */
+ if (!clint_ipi_irq || !clint_timer_irq) {
+ pr_err("%pOFP: ipi/timer irq not found\n", np);
+ return -ENODEV;
+ }
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ pr_err("%pOFP: could not map registers\n", np);
+ return -ENODEV;
+ }
+
+ clint_ipi_base = base + CLINT_IPI_OFF;
+ clint_timer_cmp = base + CLINT_TIMER_CMP_OFF;
+ clint_timer_val = base + CLINT_TIMER_VAL_OFF;
+ clint_timer_freq = riscv_timebase;
+
+#ifdef CONFIG_RISCV_M_MODE
+ /*
+ * Yes, that's an odd naming scheme. time_val is public, but hopefully
+ * will die in favor of something cleaner.
+ */
+ clint_time_val = clint_timer_val;
+#endif
+
+ pr_info("%pOFP: timer running at %ld Hz\n", np, clint_timer_freq);
+
+ rc = clocksource_register_hz(&clint_clocksource, clint_timer_freq);
+ if (rc) {
+ pr_err("%pOFP: clocksource register failed [%d]\n", np, rc);
+ goto fail_iounmap;
+ }
+
+ sched_clock_register(clint_get_cycles64, 64, clint_timer_freq);
+
+ rc = request_percpu_irq(clint_timer_irq, clint_timer_interrupt,
+ "clint-timer", &clint_clock_event);
+ if (rc) {
+ pr_err("registering percpu irq failed [%d]\n", rc);
+ goto fail_iounmap;
+ }
+
+#ifdef CONFIG_SMP
+ rc = ipi_mux_create(BITS_PER_BYTE, clint_send_ipi);
+ if (rc <= 0) {
+ pr_err("unable to create muxed IPIs\n");
+ rc = (rc < 0) ? rc : -ENODEV;
+ goto fail_free_irq;
+ }
+
+ irq_set_chained_handler(clint_ipi_irq, clint_ipi_interrupt);
+ riscv_ipi_set_virq_range(rc, BITS_PER_BYTE, true);
+ clint_clear_ipi();
+#endif
+
+ rc = cpuhp_setup_state(CPUHP_AP_CLINT_TIMER_STARTING,
+ "clockevents/clint/timer:starting",
+ clint_timer_starting_cpu,
+ clint_timer_dying_cpu);
+ if (rc) {
+ pr_err("%pOFP: cpuhp setup state failed [%d]\n", np, rc);
+ goto fail_free_irq;
+ }
+
+ return 0;
+
+fail_free_irq:
+ free_percpu_irq(clint_timer_irq, &clint_clock_event);
+fail_iounmap:
+ iounmap(base);
+ return rc;
+}
+
+TIMER_OF_DECLARE(clint_timer, "riscv,clint0", clint_timer_init_dt);
+TIMER_OF_DECLARE(clint_timer1, "sifive,clint0", clint_timer_init_dt);
diff --git a/drivers/clocksource/timer-cs5535.c b/drivers/clocksource/timer-cs5535.c
new file mode 100644
index 0000000000..d47acfe848
--- /dev/null
+++ b/drivers/clocksource/timer-cs5535.c
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Clock event driver for the CS5535/CS5536
+ *
+ * Copyright (C) 2006, Advanced Micro Devices, Inc.
+ * Copyright (C) 2007 Andres Salomon <dilinger@debian.org>
+ * Copyright (C) 2009 Andres Salomon <dilinger@collabora.co.uk>
+ *
+ * The MFGPTs are documented in AMD Geode CS5536 Companion Device Data Book.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/cs5535.h>
+#include <linux/clockchips.h>
+
+#define DRV_NAME "cs5535-clockevt"
+
+static int timer_irq;
+module_param_hw_named(irq, timer_irq, int, irq, 0644);
+MODULE_PARM_DESC(irq, "Which IRQ to use for the clock source MFGPT ticks.");
+
+/*
+ * We are using the 32.768kHz input clock - it's the only one that has the
+ * ranges we find desirable. The following table lists the suitable
+ * divisors and the associated Hz, minimum interval and the maximum interval:
+ *
+ * Divisor Hz Min Delta (s) Max Delta (s)
+ * 1 32768 .00048828125 2.000
+ * 2 16384 .0009765625 4.000
+ * 4 8192 .001953125 8.000
+ * 8 4096 .00390625 16.000
+ * 16 2048 .0078125 32.000
+ * 32 1024 .015625 64.000
+ * 64 512 .03125 128.000
+ * 128 256 .0625 256.000
+ * 256 128 .125 512.000
+ */
+
+static struct cs5535_mfgpt_timer *cs5535_event_clock;
+
+/* Selected from the table above */
+
+#define MFGPT_DIVISOR 16
+#define MFGPT_SCALE 4 /* divisor = 2^(scale) */
+#define MFGPT_HZ (32768 / MFGPT_DIVISOR)
+#define MFGPT_PERIODIC (MFGPT_HZ / HZ)
+
+/*
+ * The MFGPT timers on the CS5536 provide us with suitable timers to use
+ * as clock event sources - not as good as a HPET or APIC, but certainly
+ * better than the PIT. This isn't a general purpose MFGPT driver, but
+ * a simplified one designed specifically to act as a clock event source.
+ * For full details about the MFGPT, please consult the CS5536 data sheet.
+ */
+
+static void disable_timer(struct cs5535_mfgpt_timer *timer)
+{
+ /* avoid races by clearing CMP1 and CMP2 unconditionally */
+ cs5535_mfgpt_write(timer, MFGPT_REG_SETUP,
+ (uint16_t) ~MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP1 |
+ MFGPT_SETUP_CMP2);
+}
+
+static void start_timer(struct cs5535_mfgpt_timer *timer, uint16_t delta)
+{
+ cs5535_mfgpt_write(timer, MFGPT_REG_CMP2, delta);
+ cs5535_mfgpt_write(timer, MFGPT_REG_COUNTER, 0);
+
+ cs5535_mfgpt_write(timer, MFGPT_REG_SETUP,
+ MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
+}
+
+static int mfgpt_shutdown(struct clock_event_device *evt)
+{
+ disable_timer(cs5535_event_clock);
+ return 0;
+}
+
+static int mfgpt_set_periodic(struct clock_event_device *evt)
+{
+ disable_timer(cs5535_event_clock);
+ start_timer(cs5535_event_clock, MFGPT_PERIODIC);
+ return 0;
+}
+
+static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt)
+{
+ start_timer(cs5535_event_clock, delta);
+ return 0;
+}
+
+static struct clock_event_device cs5535_clockevent = {
+ .name = DRV_NAME,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_shutdown = mfgpt_shutdown,
+ .set_state_periodic = mfgpt_set_periodic,
+ .set_state_oneshot = mfgpt_shutdown,
+ .tick_resume = mfgpt_shutdown,
+ .set_next_event = mfgpt_next_event,
+ .rating = 250,
+};
+
+static irqreturn_t mfgpt_tick(int irq, void *dev_id)
+{
+ uint16_t val = cs5535_mfgpt_read(cs5535_event_clock, MFGPT_REG_SETUP);
+
+ /* See if the interrupt was for us */
+ if (!(val & (MFGPT_SETUP_SETUP | MFGPT_SETUP_CMP2 | MFGPT_SETUP_CMP1)))
+ return IRQ_NONE;
+
+ /* Turn off the clock (and clear the event) */
+ disable_timer(cs5535_event_clock);
+
+ if (clockevent_state_detached(&cs5535_clockevent) ||
+ clockevent_state_shutdown(&cs5535_clockevent))
+ return IRQ_HANDLED;
+
+ /* Clear the counter */
+ cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_COUNTER, 0);
+
+ /* Restart the clock in periodic mode */
+
+ if (clockevent_state_periodic(&cs5535_clockevent))
+ cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_SETUP,
+ MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
+
+ cs5535_clockevent.event_handler(&cs5535_clockevent);
+ return IRQ_HANDLED;
+}
+
+static int __init cs5535_mfgpt_init(void)
+{
+ unsigned long flags = IRQF_NOBALANCING | IRQF_TIMER | IRQF_SHARED;
+ struct cs5535_mfgpt_timer *timer;
+ int ret;
+ uint16_t val;
+
+ timer = cs5535_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING);
+ if (!timer) {
+ printk(KERN_ERR DRV_NAME ": Could not allocate MFGPT timer\n");
+ return -ENODEV;
+ }
+ cs5535_event_clock = timer;
+
+ /* Set up the IRQ on the MFGPT side */
+ if (cs5535_mfgpt_setup_irq(timer, MFGPT_CMP2, &timer_irq)) {
+ printk(KERN_ERR DRV_NAME ": Could not set up IRQ %d\n",
+ timer_irq);
+ goto err_timer;
+ }
+
+ /* And register it with the kernel */
+ ret = request_irq(timer_irq, mfgpt_tick, flags, DRV_NAME, timer);
+ if (ret) {
+ printk(KERN_ERR DRV_NAME ": Unable to set up the interrupt.\n");
+ goto err_irq;
+ }
+
+ /* Set the clock scale and enable the event mode for CMP2 */
+ val = MFGPT_SCALE | (3 << 8);
+
+ cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_SETUP, val);
+
+ /* Set up the clock event */
+ printk(KERN_INFO DRV_NAME
+ ": Registering MFGPT timer as a clock event, using IRQ %d\n",
+ timer_irq);
+ clockevents_config_and_register(&cs5535_clockevent, MFGPT_HZ,
+ 0xF, 0xFFFE);
+
+ return 0;
+
+err_irq:
+ cs5535_mfgpt_release_irq(cs5535_event_clock, MFGPT_CMP2, &timer_irq);
+err_timer:
+ cs5535_mfgpt_free_timer(cs5535_event_clock);
+ printk(KERN_ERR DRV_NAME ": Unable to set up the MFGPT clock source\n");
+ return -EIO;
+}
+
+module_init(cs5535_mfgpt_init);
+
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
+MODULE_DESCRIPTION("CS5535/CS5536 MFGPT clock event driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clocksource/timer-davinci.c b/drivers/clocksource/timer-davinci.c
new file mode 100644
index 0000000000..b1c248498b
--- /dev/null
+++ b/drivers/clocksource/timer-davinci.c
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI DaVinci clocksource driver
+ *
+ * Copyright (C) 2019 Texas Instruments
+ * Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+ * (with tiny parts adopted from code by Kevin Hilman <khilman@baylibre.com>)
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+#include <clocksource/timer-davinci.h>
+
+#define DAVINCI_TIMER_REG_TIM12 0x10
+#define DAVINCI_TIMER_REG_TIM34 0x14
+#define DAVINCI_TIMER_REG_PRD12 0x18
+#define DAVINCI_TIMER_REG_PRD34 0x1c
+#define DAVINCI_TIMER_REG_TCR 0x20
+#define DAVINCI_TIMER_REG_TGCR 0x24
+
+#define DAVINCI_TIMER_TIMMODE_MASK GENMASK(3, 2)
+#define DAVINCI_TIMER_RESET_MASK GENMASK(1, 0)
+#define DAVINCI_TIMER_TIMMODE_32BIT_UNCHAINED BIT(2)
+#define DAVINCI_TIMER_UNRESET GENMASK(1, 0)
+
+#define DAVINCI_TIMER_ENAMODE_MASK GENMASK(1, 0)
+#define DAVINCI_TIMER_ENAMODE_DISABLED 0x00
+#define DAVINCI_TIMER_ENAMODE_ONESHOT BIT(0)
+#define DAVINCI_TIMER_ENAMODE_PERIODIC BIT(1)
+
+#define DAVINCI_TIMER_ENAMODE_SHIFT_TIM12 6
+#define DAVINCI_TIMER_ENAMODE_SHIFT_TIM34 22
+
+#define DAVINCI_TIMER_MIN_DELTA 0x01
+#define DAVINCI_TIMER_MAX_DELTA 0xfffffffe
+
+#define DAVINCI_TIMER_CLKSRC_BITS 32
+
+#define DAVINCI_TIMER_TGCR_DEFAULT \
+ (DAVINCI_TIMER_TIMMODE_32BIT_UNCHAINED | DAVINCI_TIMER_UNRESET)
+
+struct davinci_clockevent {
+ struct clock_event_device dev;
+ void __iomem *base;
+ unsigned int cmp_off;
+};
+
+/*
+ * This must be globally accessible by davinci_timer_read_sched_clock(), so
+ * let's keep it here.
+ */
+static struct {
+ struct clocksource dev;
+ void __iomem *base;
+ unsigned int tim_off;
+} davinci_clocksource;
+
+static struct davinci_clockevent *
+to_davinci_clockevent(struct clock_event_device *clockevent)
+{
+ return container_of(clockevent, struct davinci_clockevent, dev);
+}
+
+static unsigned int
+davinci_clockevent_read(struct davinci_clockevent *clockevent,
+ unsigned int reg)
+{
+ return readl_relaxed(clockevent->base + reg);
+}
+
+static void davinci_clockevent_write(struct davinci_clockevent *clockevent,
+ unsigned int reg, unsigned int val)
+{
+ writel_relaxed(val, clockevent->base + reg);
+}
+
+static void davinci_tim12_shutdown(void __iomem *base)
+{
+ unsigned int tcr;
+
+ tcr = DAVINCI_TIMER_ENAMODE_DISABLED <<
+ DAVINCI_TIMER_ENAMODE_SHIFT_TIM12;
+ /*
+ * This function is only ever called if we're using both timer
+ * halves. In this case TIM34 runs in periodic mode and we must
+ * not modify it.
+ */
+ tcr |= DAVINCI_TIMER_ENAMODE_PERIODIC <<
+ DAVINCI_TIMER_ENAMODE_SHIFT_TIM34;
+
+ writel_relaxed(tcr, base + DAVINCI_TIMER_REG_TCR);
+}
+
+static void davinci_tim12_set_oneshot(void __iomem *base)
+{
+ unsigned int tcr;
+
+ tcr = DAVINCI_TIMER_ENAMODE_ONESHOT <<
+ DAVINCI_TIMER_ENAMODE_SHIFT_TIM12;
+ /* Same as above. */
+ tcr |= DAVINCI_TIMER_ENAMODE_PERIODIC <<
+ DAVINCI_TIMER_ENAMODE_SHIFT_TIM34;
+
+ writel_relaxed(tcr, base + DAVINCI_TIMER_REG_TCR);
+}
+
+static int davinci_clockevent_shutdown(struct clock_event_device *dev)
+{
+ struct davinci_clockevent *clockevent;
+
+ clockevent = to_davinci_clockevent(dev);
+
+ davinci_tim12_shutdown(clockevent->base);
+
+ return 0;
+}
+
+static int davinci_clockevent_set_oneshot(struct clock_event_device *dev)
+{
+ struct davinci_clockevent *clockevent = to_davinci_clockevent(dev);
+
+ davinci_clockevent_write(clockevent, DAVINCI_TIMER_REG_TIM12, 0x0);
+
+ davinci_tim12_set_oneshot(clockevent->base);
+
+ return 0;
+}
+
+static int
+davinci_clockevent_set_next_event_std(unsigned long cycles,
+ struct clock_event_device *dev)
+{
+ struct davinci_clockevent *clockevent = to_davinci_clockevent(dev);
+
+ davinci_clockevent_shutdown(dev);
+
+ davinci_clockevent_write(clockevent, DAVINCI_TIMER_REG_TIM12, 0x0);
+ davinci_clockevent_write(clockevent, DAVINCI_TIMER_REG_PRD12, cycles);
+
+ davinci_clockevent_set_oneshot(dev);
+
+ return 0;
+}
+
+static int
+davinci_clockevent_set_next_event_cmp(unsigned long cycles,
+ struct clock_event_device *dev)
+{
+ struct davinci_clockevent *clockevent = to_davinci_clockevent(dev);
+ unsigned int curr_time;
+
+ curr_time = davinci_clockevent_read(clockevent,
+ DAVINCI_TIMER_REG_TIM12);
+ davinci_clockevent_write(clockevent,
+ clockevent->cmp_off, curr_time + cycles);
+
+ return 0;
+}
+
+static irqreturn_t davinci_timer_irq_timer(int irq, void *data)
+{
+ struct davinci_clockevent *clockevent = data;
+
+ if (!clockevent_state_oneshot(&clockevent->dev))
+ davinci_tim12_shutdown(clockevent->base);
+
+ clockevent->dev.event_handler(&clockevent->dev);
+
+ return IRQ_HANDLED;
+}
+
+static u64 notrace davinci_timer_read_sched_clock(void)
+{
+ return readl_relaxed(davinci_clocksource.base +
+ davinci_clocksource.tim_off);
+}
+
+static u64 davinci_clocksource_read(struct clocksource *dev)
+{
+ return davinci_timer_read_sched_clock();
+}
+
+/*
+ * Standard use-case: we're using tim12 for clockevent and tim34 for
+ * clocksource. The default is making the former run in oneshot mode
+ * and the latter in periodic mode.
+ */
+static void davinci_clocksource_init_tim34(void __iomem *base)
+{
+ int tcr;
+
+ tcr = DAVINCI_TIMER_ENAMODE_PERIODIC <<
+ DAVINCI_TIMER_ENAMODE_SHIFT_TIM34;
+ tcr |= DAVINCI_TIMER_ENAMODE_ONESHOT <<
+ DAVINCI_TIMER_ENAMODE_SHIFT_TIM12;
+
+ writel_relaxed(0x0, base + DAVINCI_TIMER_REG_TIM34);
+ writel_relaxed(UINT_MAX, base + DAVINCI_TIMER_REG_PRD34);
+ writel_relaxed(tcr, base + DAVINCI_TIMER_REG_TCR);
+}
+
+/*
+ * Special use-case on da830: the DSP may use tim34. We're using tim12 for
+ * both clocksource and clockevent. We set tim12 to periodic and don't touch
+ * tim34.
+ */
+static void davinci_clocksource_init_tim12(void __iomem *base)
+{
+ unsigned int tcr;
+
+ tcr = DAVINCI_TIMER_ENAMODE_PERIODIC <<
+ DAVINCI_TIMER_ENAMODE_SHIFT_TIM12;
+
+ writel_relaxed(0x0, base + DAVINCI_TIMER_REG_TIM12);
+ writel_relaxed(UINT_MAX, base + DAVINCI_TIMER_REG_PRD12);
+ writel_relaxed(tcr, base + DAVINCI_TIMER_REG_TCR);
+}
+
+static void davinci_timer_init(void __iomem *base)
+{
+ /* Set clock to internal mode and disable it. */
+ writel_relaxed(0x0, base + DAVINCI_TIMER_REG_TCR);
+ /*
+ * Reset both 32-bit timers, set no prescaler for timer 34, set the
+ * timer to dual 32-bit unchained mode, unreset both 32-bit timers.
+ */
+ writel_relaxed(DAVINCI_TIMER_TGCR_DEFAULT,
+ base + DAVINCI_TIMER_REG_TGCR);
+ /* Init both counters to zero. */
+ writel_relaxed(0x0, base + DAVINCI_TIMER_REG_TIM12);
+ writel_relaxed(0x0, base + DAVINCI_TIMER_REG_TIM34);
+}
+
+int __init davinci_timer_register(struct clk *clk,
+ const struct davinci_timer_cfg *timer_cfg)
+{
+ struct davinci_clockevent *clockevent;
+ unsigned int tick_rate;
+ void __iomem *base;
+ int rv;
+
+ rv = clk_prepare_enable(clk);
+ if (rv) {
+ pr_err("Unable to prepare and enable the timer clock\n");
+ return rv;
+ }
+
+ if (!request_mem_region(timer_cfg->reg.start,
+ resource_size(&timer_cfg->reg),
+ "davinci-timer")) {
+ pr_err("Unable to request memory region\n");
+ rv = -EBUSY;
+ goto exit_clk_disable;
+ }
+
+ base = ioremap(timer_cfg->reg.start, resource_size(&timer_cfg->reg));
+ if (!base) {
+ pr_err("Unable to map the register range\n");
+ rv = -ENOMEM;
+ goto exit_mem_region;
+ }
+
+ davinci_timer_init(base);
+ tick_rate = clk_get_rate(clk);
+
+ clockevent = kzalloc(sizeof(*clockevent), GFP_KERNEL);
+ if (!clockevent) {
+ rv = -ENOMEM;
+ goto exit_iounmap_base;
+ }
+
+ clockevent->dev.name = "tim12";
+ clockevent->dev.features = CLOCK_EVT_FEAT_ONESHOT;
+ clockevent->dev.cpumask = cpumask_of(0);
+ clockevent->base = base;
+
+ if (timer_cfg->cmp_off) {
+ clockevent->cmp_off = timer_cfg->cmp_off;
+ clockevent->dev.set_next_event =
+ davinci_clockevent_set_next_event_cmp;
+ } else {
+ clockevent->dev.set_next_event =
+ davinci_clockevent_set_next_event_std;
+ clockevent->dev.set_state_oneshot =
+ davinci_clockevent_set_oneshot;
+ clockevent->dev.set_state_shutdown =
+ davinci_clockevent_shutdown;
+ }
+
+ rv = request_irq(timer_cfg->irq[DAVINCI_TIMER_CLOCKEVENT_IRQ].start,
+ davinci_timer_irq_timer, IRQF_TIMER,
+ "clockevent/tim12", clockevent);
+ if (rv) {
+ pr_err("Unable to request the clockevent interrupt\n");
+ goto exit_free_clockevent;
+ }
+
+ davinci_clocksource.dev.rating = 300;
+ davinci_clocksource.dev.read = davinci_clocksource_read;
+ davinci_clocksource.dev.mask =
+ CLOCKSOURCE_MASK(DAVINCI_TIMER_CLKSRC_BITS);
+ davinci_clocksource.dev.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+ davinci_clocksource.base = base;
+
+ if (timer_cfg->cmp_off) {
+ davinci_clocksource.dev.name = "tim12";
+ davinci_clocksource.tim_off = DAVINCI_TIMER_REG_TIM12;
+ davinci_clocksource_init_tim12(base);
+ } else {
+ davinci_clocksource.dev.name = "tim34";
+ davinci_clocksource.tim_off = DAVINCI_TIMER_REG_TIM34;
+ davinci_clocksource_init_tim34(base);
+ }
+
+ clockevents_config_and_register(&clockevent->dev, tick_rate,
+ DAVINCI_TIMER_MIN_DELTA,
+ DAVINCI_TIMER_MAX_DELTA);
+
+ rv = clocksource_register_hz(&davinci_clocksource.dev, tick_rate);
+ if (rv) {
+ pr_err("Unable to register clocksource\n");
+ goto exit_free_irq;
+ }
+
+ sched_clock_register(davinci_timer_read_sched_clock,
+ DAVINCI_TIMER_CLKSRC_BITS, tick_rate);
+
+ return 0;
+
+exit_free_irq:
+ free_irq(timer_cfg->irq[DAVINCI_TIMER_CLOCKEVENT_IRQ].start,
+ clockevent);
+exit_free_clockevent:
+ kfree(clockevent);
+exit_iounmap_base:
+ iounmap(base);
+exit_mem_region:
+ release_mem_region(timer_cfg->reg.start,
+ resource_size(&timer_cfg->reg));
+exit_clk_disable:
+ clk_disable_unprepare(clk);
+ return rv;
+}
+
+static int __init of_davinci_timer_register(struct device_node *np)
+{
+ struct davinci_timer_cfg timer_cfg = { };
+ struct clk *clk;
+ int rv;
+
+ rv = of_address_to_resource(np, 0, &timer_cfg.reg);
+ if (rv) {
+ pr_err("Unable to get the register range for timer\n");
+ return rv;
+ }
+
+ rv = of_irq_to_resource_table(np, timer_cfg.irq,
+ DAVINCI_TIMER_NUM_IRQS);
+ if (rv != DAVINCI_TIMER_NUM_IRQS) {
+ pr_err("Unable to get the interrupts for timer\n");
+ return rv;
+ }
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("Unable to get the timer clock\n");
+ return PTR_ERR(clk);
+ }
+
+ rv = davinci_timer_register(clk, &timer_cfg);
+ if (rv)
+ clk_put(clk);
+
+ return rv;
+}
+TIMER_OF_DECLARE(davinci_timer, "ti,da830-timer", of_davinci_timer_register);
diff --git a/drivers/clocksource/timer-digicolor.c b/drivers/clocksource/timer-digicolor.c
new file mode 100644
index 0000000000..559aa96089
--- /dev/null
+++ b/drivers/clocksource/timer-digicolor.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Conexant Digicolor timer driver
+ *
+ * Author: Baruch Siach <baruch@tkos.co.il>
+ *
+ * Copyright (C) 2014 Paradox Innovation Ltd.
+ *
+ * Based on:
+ * Allwinner SoCs hstimer driver
+ *
+ * Copyright (C) 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
+/*
+ * Conexant Digicolor SoCs have 8 configurable timers, named from "Timer A" to
+ * "Timer H". Timer A is the only one with watchdog support, so it is dedicated
+ * to the watchdog driver. This driver uses Timer B for sched_clock(), and
+ * Timer C for clockevents.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/sched/clock.h>
+#include <linux/sched_clock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+enum {
+ TIMER_A,
+ TIMER_B,
+ TIMER_C,
+ TIMER_D,
+ TIMER_E,
+ TIMER_F,
+ TIMER_G,
+ TIMER_H,
+};
+
+#define CONTROL(t) ((t)*8)
+#define COUNT(t) ((t)*8 + 4)
+
+#define CONTROL_DISABLE 0
+#define CONTROL_ENABLE BIT(0)
+#define CONTROL_MODE(m) ((m) << 4)
+#define CONTROL_MODE_ONESHOT CONTROL_MODE(1)
+#define CONTROL_MODE_PERIODIC CONTROL_MODE(2)
+
+struct digicolor_timer {
+ struct clock_event_device ce;
+ void __iomem *base;
+ u32 ticks_per_jiffy;
+ int timer_id; /* one of TIMER_* */
+};
+
+static struct digicolor_timer *dc_timer(struct clock_event_device *ce)
+{
+ return container_of(ce, struct digicolor_timer, ce);
+}
+
+static inline void dc_timer_disable(struct clock_event_device *ce)
+{
+ struct digicolor_timer *dt = dc_timer(ce);
+ writeb(CONTROL_DISABLE, dt->base + CONTROL(dt->timer_id));
+}
+
+static inline void dc_timer_enable(struct clock_event_device *ce, u32 mode)
+{
+ struct digicolor_timer *dt = dc_timer(ce);
+ writeb(CONTROL_ENABLE | mode, dt->base + CONTROL(dt->timer_id));
+}
+
+static inline void dc_timer_set_count(struct clock_event_device *ce,
+ unsigned long count)
+{
+ struct digicolor_timer *dt = dc_timer(ce);
+ writel(count, dt->base + COUNT(dt->timer_id));
+}
+
+static int digicolor_clkevt_shutdown(struct clock_event_device *ce)
+{
+ dc_timer_disable(ce);
+ return 0;
+}
+
+static int digicolor_clkevt_set_oneshot(struct clock_event_device *ce)
+{
+ dc_timer_disable(ce);
+ dc_timer_enable(ce, CONTROL_MODE_ONESHOT);
+ return 0;
+}
+
+static int digicolor_clkevt_set_periodic(struct clock_event_device *ce)
+{
+ struct digicolor_timer *dt = dc_timer(ce);
+
+ dc_timer_disable(ce);
+ dc_timer_set_count(ce, dt->ticks_per_jiffy);
+ dc_timer_enable(ce, CONTROL_MODE_PERIODIC);
+ return 0;
+}
+
+static int digicolor_clkevt_next_event(unsigned long evt,
+ struct clock_event_device *ce)
+{
+ dc_timer_disable(ce);
+ dc_timer_set_count(ce, evt);
+ dc_timer_enable(ce, CONTROL_MODE_ONESHOT);
+
+ return 0;
+}
+
+static struct digicolor_timer dc_timer_dev = {
+ .ce = {
+ .name = "digicolor_tick",
+ .rating = 340,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_shutdown = digicolor_clkevt_shutdown,
+ .set_state_periodic = digicolor_clkevt_set_periodic,
+ .set_state_oneshot = digicolor_clkevt_set_oneshot,
+ .tick_resume = digicolor_clkevt_shutdown,
+ .set_next_event = digicolor_clkevt_next_event,
+ },
+ .timer_id = TIMER_C,
+};
+
+static irqreturn_t digicolor_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static u64 notrace digicolor_timer_sched_read(void)
+{
+ return ~readl(dc_timer_dev.base + COUNT(TIMER_B));
+}
+
+static int __init digicolor_timer_init(struct device_node *node)
+{
+ unsigned long rate;
+ struct clk *clk;
+ int ret, irq;
+
+ /*
+ * timer registers are shared with the watchdog timer;
+ * don't map exclusively
+ */
+ dc_timer_dev.base = of_iomap(node, 0);
+ if (!dc_timer_dev.base) {
+ pr_err("Can't map registers\n");
+ return -ENXIO;
+ }
+
+ irq = irq_of_parse_and_map(node, dc_timer_dev.timer_id);
+ if (irq <= 0) {
+ pr_err("Can't parse IRQ\n");
+ return -EINVAL;
+ }
+
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("Can't get timer clock\n");
+ return PTR_ERR(clk);
+ }
+ clk_prepare_enable(clk);
+ rate = clk_get_rate(clk);
+ dc_timer_dev.ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
+
+ writeb(CONTROL_DISABLE, dc_timer_dev.base + CONTROL(TIMER_B));
+ writel(UINT_MAX, dc_timer_dev.base + COUNT(TIMER_B));
+ writeb(CONTROL_ENABLE, dc_timer_dev.base + CONTROL(TIMER_B));
+
+ sched_clock_register(digicolor_timer_sched_read, 32, rate);
+ clocksource_mmio_init(dc_timer_dev.base + COUNT(TIMER_B), node->name,
+ rate, 340, 32, clocksource_mmio_readl_down);
+
+ ret = request_irq(irq, digicolor_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "digicolor_timerC",
+ &dc_timer_dev.ce);
+ if (ret) {
+ pr_warn("request of timer irq %d failed (%d)\n", irq, ret);
+ return ret;
+ }
+
+ dc_timer_dev.ce.cpumask = cpu_possible_mask;
+ dc_timer_dev.ce.irq = irq;
+
+ clockevents_config_and_register(&dc_timer_dev.ce, rate, 0, 0xffffffff);
+
+ return 0;
+}
+TIMER_OF_DECLARE(conexant_digicolor, "cnxt,cx92755-timer",
+ digicolor_timer_init);
diff --git a/drivers/clocksource/timer-fsl-ftm.c b/drivers/clocksource/timer-fsl-ftm.c
new file mode 100644
index 0000000000..93f336ec87
--- /dev/null
+++ b/drivers/clocksource/timer-fsl-ftm.c
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Freescale FlexTimer Module (FTM) timer driver.
+ *
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+#include <linux/fsl/ftm.h>
+
+#define FTM_SC_CLK(c) ((c) << FTM_SC_CLK_MASK_SHIFT)
+
+struct ftm_clock_device {
+ void __iomem *clksrc_base;
+ void __iomem *clkevt_base;
+ unsigned long periodic_cyc;
+ unsigned long ps;
+ bool big_endian;
+};
+
+static struct ftm_clock_device *priv;
+
+static inline u32 ftm_readl(void __iomem *addr)
+{
+ if (priv->big_endian)
+ return ioread32be(addr);
+ else
+ return ioread32(addr);
+}
+
+static inline void ftm_writel(u32 val, void __iomem *addr)
+{
+ if (priv->big_endian)
+ iowrite32be(val, addr);
+ else
+ iowrite32(val, addr);
+}
+
+static inline void ftm_counter_enable(void __iomem *base)
+{
+ u32 val;
+
+ /* select and enable counter clock source */
+ val = ftm_readl(base + FTM_SC);
+ val &= ~(FTM_SC_PS_MASK | FTM_SC_CLK_MASK);
+ val |= priv->ps | FTM_SC_CLK(1);
+ ftm_writel(val, base + FTM_SC);
+}
+
+static inline void ftm_counter_disable(void __iomem *base)
+{
+ u32 val;
+
+ /* disable counter clock source */
+ val = ftm_readl(base + FTM_SC);
+ val &= ~(FTM_SC_PS_MASK | FTM_SC_CLK_MASK);
+ ftm_writel(val, base + FTM_SC);
+}
+
+static inline void ftm_irq_acknowledge(void __iomem *base)
+{
+ u32 val;
+
+ val = ftm_readl(base + FTM_SC);
+ val &= ~FTM_SC_TOF;
+ ftm_writel(val, base + FTM_SC);
+}
+
+static inline void ftm_irq_enable(void __iomem *base)
+{
+ u32 val;
+
+ val = ftm_readl(base + FTM_SC);
+ val |= FTM_SC_TOIE;
+ ftm_writel(val, base + FTM_SC);
+}
+
+static inline void ftm_irq_disable(void __iomem *base)
+{
+ u32 val;
+
+ val = ftm_readl(base + FTM_SC);
+ val &= ~FTM_SC_TOIE;
+ ftm_writel(val, base + FTM_SC);
+}
+
+static inline void ftm_reset_counter(void __iomem *base)
+{
+ /*
+ * The CNT register contains the FTM counter value.
+ * Reset clears the CNT register. Writing any value to COUNT
+ * updates the counter with its initial value, CNTIN.
+ */
+ ftm_writel(0x00, base + FTM_CNT);
+}
+
+static u64 notrace ftm_read_sched_clock(void)
+{
+ return ftm_readl(priv->clksrc_base + FTM_CNT);
+}
+
+static int ftm_set_next_event(unsigned long delta,
+ struct clock_event_device *unused)
+{
+ /*
+ * The CNNIN and MOD are all double buffer registers, writing
+ * to the MOD register latches the value into a buffer. The MOD
+ * register is updated with the value of its write buffer with
+ * the following scenario:
+ * a, the counter source clock is disabled.
+ */
+ ftm_counter_disable(priv->clkevt_base);
+
+ /* Force the value of CNTIN to be loaded into the FTM counter */
+ ftm_reset_counter(priv->clkevt_base);
+
+ /*
+ * The counter increments until the value of MOD is reached,
+ * at which point the counter is reloaded with the value of CNTIN.
+ * The TOF (the overflow flag) bit is set when the FTM counter
+ * changes from MOD to CNTIN. So we should using the delta - 1.
+ */
+ ftm_writel(delta - 1, priv->clkevt_base + FTM_MOD);
+
+ ftm_counter_enable(priv->clkevt_base);
+
+ ftm_irq_enable(priv->clkevt_base);
+
+ return 0;
+}
+
+static int ftm_set_oneshot(struct clock_event_device *evt)
+{
+ ftm_counter_disable(priv->clkevt_base);
+ return 0;
+}
+
+static int ftm_set_periodic(struct clock_event_device *evt)
+{
+ ftm_set_next_event(priv->periodic_cyc, evt);
+ return 0;
+}
+
+static irqreturn_t ftm_evt_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ ftm_irq_acknowledge(priv->clkevt_base);
+
+ if (likely(clockevent_state_oneshot(evt))) {
+ ftm_irq_disable(priv->clkevt_base);
+ ftm_counter_disable(priv->clkevt_base);
+ }
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct clock_event_device ftm_clockevent = {
+ .name = "Freescale ftm timer",
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_periodic = ftm_set_periodic,
+ .set_state_oneshot = ftm_set_oneshot,
+ .set_next_event = ftm_set_next_event,
+ .rating = 300,
+};
+
+static int __init ftm_clockevent_init(unsigned long freq, int irq)
+{
+ int err;
+
+ ftm_writel(0x00, priv->clkevt_base + FTM_CNTIN);
+ ftm_writel(~0u, priv->clkevt_base + FTM_MOD);
+
+ ftm_reset_counter(priv->clkevt_base);
+
+ err = request_irq(irq, ftm_evt_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+ "Freescale ftm timer", &ftm_clockevent);
+ if (err) {
+ pr_err("ftm: setup irq failed: %d\n", err);
+ return err;
+ }
+
+ ftm_clockevent.cpumask = cpumask_of(0);
+ ftm_clockevent.irq = irq;
+
+ clockevents_config_and_register(&ftm_clockevent,
+ freq / (1 << priv->ps),
+ 1, 0xffff);
+
+ ftm_counter_enable(priv->clkevt_base);
+
+ return 0;
+}
+
+static int __init ftm_clocksource_init(unsigned long freq)
+{
+ int err;
+
+ ftm_writel(0x00, priv->clksrc_base + FTM_CNTIN);
+ ftm_writel(~0u, priv->clksrc_base + FTM_MOD);
+
+ ftm_reset_counter(priv->clksrc_base);
+
+ sched_clock_register(ftm_read_sched_clock, 16, freq / (1 << priv->ps));
+ err = clocksource_mmio_init(priv->clksrc_base + FTM_CNT, "fsl-ftm",
+ freq / (1 << priv->ps), 300, 16,
+ clocksource_mmio_readl_up);
+ if (err) {
+ pr_err("ftm: init clock source mmio failed: %d\n", err);
+ return err;
+ }
+
+ ftm_counter_enable(priv->clksrc_base);
+
+ return 0;
+}
+
+static int __init __ftm_clk_init(struct device_node *np, char *cnt_name,
+ char *ftm_name)
+{
+ struct clk *clk;
+ int err;
+
+ clk = of_clk_get_by_name(np, cnt_name);
+ if (IS_ERR(clk)) {
+ pr_err("ftm: Cannot get \"%s\": %ld\n", cnt_name, PTR_ERR(clk));
+ return PTR_ERR(clk);
+ }
+ err = clk_prepare_enable(clk);
+ if (err) {
+ pr_err("ftm: clock failed to prepare+enable \"%s\": %d\n",
+ cnt_name, err);
+ return err;
+ }
+
+ clk = of_clk_get_by_name(np, ftm_name);
+ if (IS_ERR(clk)) {
+ pr_err("ftm: Cannot get \"%s\": %ld\n", ftm_name, PTR_ERR(clk));
+ return PTR_ERR(clk);
+ }
+ err = clk_prepare_enable(clk);
+ if (err)
+ pr_err("ftm: clock failed to prepare+enable \"%s\": %d\n",
+ ftm_name, err);
+
+ return clk_get_rate(clk);
+}
+
+static unsigned long __init ftm_clk_init(struct device_node *np)
+{
+ long freq;
+
+ freq = __ftm_clk_init(np, "ftm-evt-counter-en", "ftm-evt");
+ if (freq <= 0)
+ return 0;
+
+ freq = __ftm_clk_init(np, "ftm-src-counter-en", "ftm-src");
+ if (freq <= 0)
+ return 0;
+
+ return freq;
+}
+
+static int __init ftm_calc_closest_round_cyc(unsigned long freq)
+{
+ priv->ps = 0;
+
+ /* The counter register is only using the lower 16 bits, and
+ * if the 'freq' value is to big here, then the periodic_cyc
+ * may exceed 0xFFFF.
+ */
+ do {
+ priv->periodic_cyc = DIV_ROUND_CLOSEST(freq,
+ HZ * (1 << priv->ps++));
+ } while (priv->periodic_cyc > 0xFFFF);
+
+ if (priv->ps > FTM_PS_MAX) {
+ pr_err("ftm: the prescaler is %lu > %d\n",
+ priv->ps, FTM_PS_MAX);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int __init ftm_timer_init(struct device_node *np)
+{
+ unsigned long freq;
+ int ret, irq;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ ret = -ENXIO;
+ priv->clkevt_base = of_iomap(np, 0);
+ if (!priv->clkevt_base) {
+ pr_err("ftm: unable to map event timer registers\n");
+ goto err_clkevt;
+ }
+
+ priv->clksrc_base = of_iomap(np, 1);
+ if (!priv->clksrc_base) {
+ pr_err("ftm: unable to map source timer registers\n");
+ goto err_clksrc;
+ }
+
+ ret = -EINVAL;
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq <= 0) {
+ pr_err("ftm: unable to get IRQ from DT, %d\n", irq);
+ goto err;
+ }
+
+ priv->big_endian = of_property_read_bool(np, "big-endian");
+
+ freq = ftm_clk_init(np);
+ if (!freq)
+ goto err;
+
+ ret = ftm_calc_closest_round_cyc(freq);
+ if (ret)
+ goto err;
+
+ ret = ftm_clocksource_init(freq);
+ if (ret)
+ goto err;
+
+ ret = ftm_clockevent_init(freq, irq);
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ iounmap(priv->clksrc_base);
+err_clksrc:
+ iounmap(priv->clkevt_base);
+err_clkevt:
+ kfree(priv);
+ return ret;
+}
+TIMER_OF_DECLARE(flextimer, "fsl,ftm-timer", ftm_timer_init);
diff --git a/drivers/clocksource/timer-fttmr010.c b/drivers/clocksource/timer-fttmr010.c
new file mode 100644
index 0000000000..126fb1f259
--- /dev/null
+++ b/drivers/clocksource/timer-fttmr010.c
@@ -0,0 +1,459 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Faraday Technology FTTMR010 timer driver
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Based on a rewrite of arch/arm/mach-gemini/timer.c:
+ * Copyright (C) 2001-2006 Storlink, Corp.
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ */
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/sched_clock.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+
+/*
+ * Register definitions common for all the timer variants.
+ */
+#define TIMER1_COUNT (0x00)
+#define TIMER1_LOAD (0x04)
+#define TIMER1_MATCH1 (0x08)
+#define TIMER1_MATCH2 (0x0c)
+#define TIMER2_COUNT (0x10)
+#define TIMER2_LOAD (0x14)
+#define TIMER2_MATCH1 (0x18)
+#define TIMER2_MATCH2 (0x1c)
+#define TIMER3_COUNT (0x20)
+#define TIMER3_LOAD (0x24)
+#define TIMER3_MATCH1 (0x28)
+#define TIMER3_MATCH2 (0x2c)
+#define TIMER_CR (0x30)
+
+/*
+ * Control register set to clear for ast2600 only.
+ */
+#define AST2600_TIMER_CR_CLR (0x3c)
+
+/*
+ * Control register (TMC30) bit fields for fttmr010/gemini/moxart timers.
+ */
+#define TIMER_1_CR_ENABLE BIT(0)
+#define TIMER_1_CR_CLOCK BIT(1)
+#define TIMER_1_CR_INT BIT(2)
+#define TIMER_2_CR_ENABLE BIT(3)
+#define TIMER_2_CR_CLOCK BIT(4)
+#define TIMER_2_CR_INT BIT(5)
+#define TIMER_3_CR_ENABLE BIT(6)
+#define TIMER_3_CR_CLOCK BIT(7)
+#define TIMER_3_CR_INT BIT(8)
+#define TIMER_1_CR_UPDOWN BIT(9)
+#define TIMER_2_CR_UPDOWN BIT(10)
+#define TIMER_3_CR_UPDOWN BIT(11)
+
+/*
+ * Control register (TMC30) bit fields for aspeed ast2400/ast2500 timers.
+ * The aspeed timers move bits around in the control register and lacks
+ * bits for setting the timer to count upwards.
+ */
+#define TIMER_1_CR_ASPEED_ENABLE BIT(0)
+#define TIMER_1_CR_ASPEED_CLOCK BIT(1)
+#define TIMER_1_CR_ASPEED_INT BIT(2)
+#define TIMER_2_CR_ASPEED_ENABLE BIT(4)
+#define TIMER_2_CR_ASPEED_CLOCK BIT(5)
+#define TIMER_2_CR_ASPEED_INT BIT(6)
+#define TIMER_3_CR_ASPEED_ENABLE BIT(8)
+#define TIMER_3_CR_ASPEED_CLOCK BIT(9)
+#define TIMER_3_CR_ASPEED_INT BIT(10)
+
+/*
+ * Interrupt status/mask register definitions for fttmr010/gemini/moxart
+ * timers.
+ * The registers don't exist and they are not needed on aspeed timers
+ * because:
+ * - aspeed timer overflow interrupt is controlled by bits in Control
+ * Register (TMC30).
+ * - aspeed timers always generate interrupt when either one of the
+ * Match registers equals to Status register.
+ */
+#define TIMER_INTR_STATE (0x34)
+#define TIMER_INTR_MASK (0x38)
+#define TIMER_1_INT_MATCH1 BIT(0)
+#define TIMER_1_INT_MATCH2 BIT(1)
+#define TIMER_1_INT_OVERFLOW BIT(2)
+#define TIMER_2_INT_MATCH1 BIT(3)
+#define TIMER_2_INT_MATCH2 BIT(4)
+#define TIMER_2_INT_OVERFLOW BIT(5)
+#define TIMER_3_INT_MATCH1 BIT(6)
+#define TIMER_3_INT_MATCH2 BIT(7)
+#define TIMER_3_INT_OVERFLOW BIT(8)
+#define TIMER_INT_ALL_MASK 0x1ff
+
+struct fttmr010 {
+ void __iomem *base;
+ unsigned int tick_rate;
+ bool is_aspeed;
+ u32 t1_enable_val;
+ struct clock_event_device clkevt;
+ int (*timer_shutdown)(struct clock_event_device *evt);
+#ifdef CONFIG_ARM
+ struct delay_timer delay_timer;
+#endif
+};
+
+/*
+ * A local singleton used by sched_clock and delay timer reads, which are
+ * fast and stateless
+ */
+static struct fttmr010 *local_fttmr;
+
+static inline struct fttmr010 *to_fttmr010(struct clock_event_device *evt)
+{
+ return container_of(evt, struct fttmr010, clkevt);
+}
+
+static unsigned long fttmr010_read_current_timer_up(void)
+{
+ return readl(local_fttmr->base + TIMER2_COUNT);
+}
+
+static unsigned long fttmr010_read_current_timer_down(void)
+{
+ return ~readl(local_fttmr->base + TIMER2_COUNT);
+}
+
+static u64 notrace fttmr010_read_sched_clock_up(void)
+{
+ return fttmr010_read_current_timer_up();
+}
+
+static u64 notrace fttmr010_read_sched_clock_down(void)
+{
+ return fttmr010_read_current_timer_down();
+}
+
+static int fttmr010_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ struct fttmr010 *fttmr010 = to_fttmr010(evt);
+ u32 cr;
+
+ /* Stop */
+ fttmr010->timer_shutdown(evt);
+
+ if (fttmr010->is_aspeed) {
+ /*
+ * ASPEED Timer Controller will load TIMER1_LOAD register
+ * into TIMER1_COUNT register when the timer is re-enabled.
+ */
+ writel(cycles, fttmr010->base + TIMER1_LOAD);
+ } else {
+ /* Setup the match register forward in time */
+ cr = readl(fttmr010->base + TIMER1_COUNT);
+ writel(cr + cycles, fttmr010->base + TIMER1_MATCH1);
+ }
+
+ /* Start */
+ cr = readl(fttmr010->base + TIMER_CR);
+ cr |= fttmr010->t1_enable_val;
+ writel(cr, fttmr010->base + TIMER_CR);
+
+ return 0;
+}
+
+static int ast2600_timer_shutdown(struct clock_event_device *evt)
+{
+ struct fttmr010 *fttmr010 = to_fttmr010(evt);
+
+ /* Stop */
+ writel(fttmr010->t1_enable_val, fttmr010->base + AST2600_TIMER_CR_CLR);
+
+ return 0;
+}
+
+static int fttmr010_timer_shutdown(struct clock_event_device *evt)
+{
+ struct fttmr010 *fttmr010 = to_fttmr010(evt);
+ u32 cr;
+
+ /* Stop */
+ cr = readl(fttmr010->base + TIMER_CR);
+ cr &= ~fttmr010->t1_enable_val;
+ writel(cr, fttmr010->base + TIMER_CR);
+
+ return 0;
+}
+
+static int fttmr010_timer_set_oneshot(struct clock_event_device *evt)
+{
+ struct fttmr010 *fttmr010 = to_fttmr010(evt);
+ u32 cr;
+
+ /* Stop */
+ fttmr010->timer_shutdown(evt);
+
+ /* Setup counter start from 0 or ~0 */
+ writel(0, fttmr010->base + TIMER1_COUNT);
+ if (fttmr010->is_aspeed) {
+ writel(~0, fttmr010->base + TIMER1_LOAD);
+ } else {
+ writel(0, fttmr010->base + TIMER1_LOAD);
+
+ /* Enable interrupt */
+ cr = readl(fttmr010->base + TIMER_INTR_MASK);
+ cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2);
+ cr |= TIMER_1_INT_MATCH1;
+ writel(cr, fttmr010->base + TIMER_INTR_MASK);
+ }
+
+ return 0;
+}
+
+static int fttmr010_timer_set_periodic(struct clock_event_device *evt)
+{
+ struct fttmr010 *fttmr010 = to_fttmr010(evt);
+ u32 period = DIV_ROUND_CLOSEST(fttmr010->tick_rate, HZ);
+ u32 cr;
+
+ /* Stop */
+ fttmr010->timer_shutdown(evt);
+
+ /* Setup timer to fire at 1/HZ intervals. */
+ if (fttmr010->is_aspeed) {
+ writel(period, fttmr010->base + TIMER1_LOAD);
+ } else {
+ cr = 0xffffffff - (period - 1);
+ writel(cr, fttmr010->base + TIMER1_COUNT);
+ writel(cr, fttmr010->base + TIMER1_LOAD);
+
+ /* Enable interrupt on overflow */
+ cr = readl(fttmr010->base + TIMER_INTR_MASK);
+ cr &= ~(TIMER_1_INT_MATCH1 | TIMER_1_INT_MATCH2);
+ cr |= TIMER_1_INT_OVERFLOW;
+ writel(cr, fttmr010->base + TIMER_INTR_MASK);
+ }
+
+ /* Start the timer */
+ cr = readl(fttmr010->base + TIMER_CR);
+ cr |= fttmr010->t1_enable_val;
+ writel(cr, fttmr010->base + TIMER_CR);
+
+ return 0;
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t fttmr010_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ast2600_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ struct fttmr010 *fttmr010 = to_fttmr010(evt);
+
+ writel(0x1, fttmr010->base + TIMER_INTR_STATE);
+
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static int __init fttmr010_common_init(struct device_node *np,
+ bool is_aspeed, bool is_ast2600)
+{
+ struct fttmr010 *fttmr010;
+ int irq;
+ struct clk *clk;
+ int ret;
+ u32 val;
+
+ /*
+ * These implementations require a clock reference.
+ * FIXME: we currently only support clocking using PCLK
+ * and using EXTCLK is not supported in the driver.
+ */
+ clk = of_clk_get_by_name(np, "PCLK");
+ if (IS_ERR(clk)) {
+ pr_err("could not get PCLK\n");
+ return PTR_ERR(clk);
+ }
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("failed to enable PCLK\n");
+ return ret;
+ }
+
+ fttmr010 = kzalloc(sizeof(*fttmr010), GFP_KERNEL);
+ if (!fttmr010) {
+ ret = -ENOMEM;
+ goto out_disable_clock;
+ }
+ fttmr010->tick_rate = clk_get_rate(clk);
+
+ fttmr010->base = of_iomap(np, 0);
+ if (!fttmr010->base) {
+ pr_err("Can't remap registers\n");
+ ret = -ENXIO;
+ goto out_free;
+ }
+ /* IRQ for timer 1 */
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq <= 0) {
+ pr_err("Can't parse IRQ\n");
+ ret = -EINVAL;
+ goto out_unmap;
+ }
+
+ /*
+ * The Aspeed timers move bits around in the control register.
+ */
+ if (is_aspeed) {
+ fttmr010->t1_enable_val = TIMER_1_CR_ASPEED_ENABLE |
+ TIMER_1_CR_ASPEED_INT;
+ fttmr010->is_aspeed = true;
+ } else {
+ fttmr010->t1_enable_val = TIMER_1_CR_ENABLE | TIMER_1_CR_INT;
+
+ /*
+ * Reset the interrupt mask and status
+ */
+ writel(TIMER_INT_ALL_MASK, fttmr010->base + TIMER_INTR_MASK);
+ writel(0, fttmr010->base + TIMER_INTR_STATE);
+ }
+
+ /*
+ * Enable timer 1 count up, timer 2 count up, except on Aspeed,
+ * where everything just counts down.
+ */
+ if (is_aspeed)
+ val = TIMER_2_CR_ASPEED_ENABLE;
+ else {
+ val = TIMER_2_CR_ENABLE | TIMER_1_CR_UPDOWN |
+ TIMER_2_CR_UPDOWN;
+ }
+ writel(val, fttmr010->base + TIMER_CR);
+
+ /*
+ * Setup free-running clocksource timer (interrupts
+ * disabled.)
+ */
+ local_fttmr = fttmr010;
+ writel(0, fttmr010->base + TIMER2_COUNT);
+ writel(0, fttmr010->base + TIMER2_MATCH1);
+ writel(0, fttmr010->base + TIMER2_MATCH2);
+
+ if (fttmr010->is_aspeed) {
+ writel(~0, fttmr010->base + TIMER2_LOAD);
+ clocksource_mmio_init(fttmr010->base + TIMER2_COUNT,
+ "FTTMR010-TIMER2",
+ fttmr010->tick_rate,
+ 300, 32, clocksource_mmio_readl_down);
+ sched_clock_register(fttmr010_read_sched_clock_down, 32,
+ fttmr010->tick_rate);
+ } else {
+ writel(0, fttmr010->base + TIMER2_LOAD);
+ clocksource_mmio_init(fttmr010->base + TIMER2_COUNT,
+ "FTTMR010-TIMER2",
+ fttmr010->tick_rate,
+ 300, 32, clocksource_mmio_readl_up);
+ sched_clock_register(fttmr010_read_sched_clock_up, 32,
+ fttmr010->tick_rate);
+ }
+
+ /*
+ * Setup clockevent timer (interrupt-driven) on timer 1.
+ */
+ writel(0, fttmr010->base + TIMER1_COUNT);
+ writel(0, fttmr010->base + TIMER1_LOAD);
+ writel(0, fttmr010->base + TIMER1_MATCH1);
+ writel(0, fttmr010->base + TIMER1_MATCH2);
+
+ if (is_ast2600) {
+ fttmr010->timer_shutdown = ast2600_timer_shutdown;
+ ret = request_irq(irq, ast2600_timer_interrupt,
+ IRQF_TIMER, "FTTMR010-TIMER1",
+ &fttmr010->clkevt);
+ } else {
+ fttmr010->timer_shutdown = fttmr010_timer_shutdown;
+ ret = request_irq(irq, fttmr010_timer_interrupt,
+ IRQF_TIMER, "FTTMR010-TIMER1",
+ &fttmr010->clkevt);
+ }
+ if (ret) {
+ pr_err("FTTMR010-TIMER1 no IRQ\n");
+ goto out_unmap;
+ }
+
+ fttmr010->clkevt.name = "FTTMR010-TIMER1";
+ /* Reasonably fast and accurate clock event */
+ fttmr010->clkevt.rating = 300;
+ fttmr010->clkevt.features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT;
+ fttmr010->clkevt.set_next_event = fttmr010_timer_set_next_event;
+ fttmr010->clkevt.set_state_shutdown = fttmr010->timer_shutdown;
+ fttmr010->clkevt.set_state_periodic = fttmr010_timer_set_periodic;
+ fttmr010->clkevt.set_state_oneshot = fttmr010_timer_set_oneshot;
+ fttmr010->clkevt.tick_resume = fttmr010->timer_shutdown;
+ fttmr010->clkevt.cpumask = cpumask_of(0);
+ fttmr010->clkevt.irq = irq;
+ clockevents_config_and_register(&fttmr010->clkevt,
+ fttmr010->tick_rate,
+ 1, 0xffffffff);
+
+#ifdef CONFIG_ARM
+ /* Also use this timer for delays */
+ if (fttmr010->is_aspeed)
+ fttmr010->delay_timer.read_current_timer =
+ fttmr010_read_current_timer_down;
+ else
+ fttmr010->delay_timer.read_current_timer =
+ fttmr010_read_current_timer_up;
+ fttmr010->delay_timer.freq = fttmr010->tick_rate;
+ register_current_timer_delay(&fttmr010->delay_timer);
+#endif
+
+ return 0;
+
+out_unmap:
+ iounmap(fttmr010->base);
+out_free:
+ kfree(fttmr010);
+out_disable_clock:
+ clk_disable_unprepare(clk);
+
+ return ret;
+}
+
+static __init int ast2600_timer_init(struct device_node *np)
+{
+ return fttmr010_common_init(np, true, true);
+}
+
+static __init int aspeed_timer_init(struct device_node *np)
+{
+ return fttmr010_common_init(np, true, false);
+}
+
+static __init int fttmr010_timer_init(struct device_node *np)
+{
+ return fttmr010_common_init(np, false, false);
+}
+
+TIMER_OF_DECLARE(fttmr010, "faraday,fttmr010", fttmr010_timer_init);
+TIMER_OF_DECLARE(gemini, "cortina,gemini-timer", fttmr010_timer_init);
+TIMER_OF_DECLARE(moxart, "moxa,moxart-timer", fttmr010_timer_init);
+TIMER_OF_DECLARE(ast2400, "aspeed,ast2400-timer", aspeed_timer_init);
+TIMER_OF_DECLARE(ast2500, "aspeed,ast2500-timer", aspeed_timer_init);
+TIMER_OF_DECLARE(ast2600, "aspeed,ast2600-timer", ast2600_timer_init);
diff --git a/drivers/clocksource/timer-goldfish.c b/drivers/clocksource/timer-goldfish.c
new file mode 100644
index 0000000000..0512d5eabc
--- /dev/null
+++ b/drivers/clocksource/timer-goldfish.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/goldfish.h>
+#include <clocksource/timer-goldfish.h>
+
+struct goldfish_timer {
+ struct clocksource cs;
+ struct clock_event_device ced;
+ struct resource res;
+ void __iomem *base;
+};
+
+static struct goldfish_timer *ced_to_gf(struct clock_event_device *ced)
+{
+ return container_of(ced, struct goldfish_timer, ced);
+}
+
+static struct goldfish_timer *cs_to_gf(struct clocksource *cs)
+{
+ return container_of(cs, struct goldfish_timer, cs);
+}
+
+static u64 goldfish_timer_read(struct clocksource *cs)
+{
+ struct goldfish_timer *timerdrv = cs_to_gf(cs);
+ void __iomem *base = timerdrv->base;
+ u32 time_low, time_high;
+ u64 ticks;
+
+ /*
+ * time_low: get low bits of current time and update time_high
+ * time_high: get high bits of time at last time_low read
+ */
+ time_low = gf_ioread32(base + TIMER_TIME_LOW);
+ time_high = gf_ioread32(base + TIMER_TIME_HIGH);
+
+ ticks = ((u64)time_high << 32) | time_low;
+
+ return ticks;
+}
+
+static int goldfish_timer_set_oneshot(struct clock_event_device *evt)
+{
+ struct goldfish_timer *timerdrv = ced_to_gf(evt);
+ void __iomem *base = timerdrv->base;
+
+ gf_iowrite32(0, base + TIMER_ALARM_HIGH);
+ gf_iowrite32(0, base + TIMER_ALARM_LOW);
+ gf_iowrite32(1, base + TIMER_IRQ_ENABLED);
+
+ return 0;
+}
+
+static int goldfish_timer_shutdown(struct clock_event_device *evt)
+{
+ struct goldfish_timer *timerdrv = ced_to_gf(evt);
+ void __iomem *base = timerdrv->base;
+
+ gf_iowrite32(0, base + TIMER_IRQ_ENABLED);
+
+ return 0;
+}
+
+static int goldfish_timer_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ struct goldfish_timer *timerdrv = ced_to_gf(evt);
+ void __iomem *base = timerdrv->base;
+ u64 now;
+
+ now = goldfish_timer_read(&timerdrv->cs);
+
+ now += delta;
+
+ gf_iowrite32(upper_32_bits(now), base + TIMER_ALARM_HIGH);
+ gf_iowrite32(lower_32_bits(now), base + TIMER_ALARM_LOW);
+
+ return 0;
+}
+
+static irqreturn_t goldfish_timer_irq(int irq, void *dev_id)
+{
+ struct goldfish_timer *timerdrv = dev_id;
+ struct clock_event_device *evt = &timerdrv->ced;
+ void __iomem *base = timerdrv->base;
+
+ gf_iowrite32(1, base + TIMER_CLEAR_INTERRUPT);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+int __init goldfish_timer_init(int irq, void __iomem *base)
+{
+ struct goldfish_timer *timerdrv;
+ int ret;
+
+ timerdrv = kzalloc(sizeof(*timerdrv), GFP_KERNEL);
+ if (!timerdrv)
+ return -ENOMEM;
+
+ timerdrv->base = base;
+
+ timerdrv->ced = (struct clock_event_device){
+ .name = "goldfish_timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_shutdown = goldfish_timer_shutdown,
+ .set_state_oneshot = goldfish_timer_set_oneshot,
+ .set_next_event = goldfish_timer_next_event,
+ };
+
+ timerdrv->res = (struct resource){
+ .name = "goldfish_timer",
+ .start = (unsigned long)base,
+ .end = (unsigned long)base + 0xfff,
+ };
+
+ ret = request_resource(&iomem_resource, &timerdrv->res);
+ if (ret) {
+ pr_err("Cannot allocate '%s' resource\n", timerdrv->res.name);
+ return ret;
+ }
+
+ timerdrv->cs = (struct clocksource){
+ .name = "goldfish_timer",
+ .rating = 400,
+ .read = goldfish_timer_read,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = 0,
+ .max_idle_ns = LONG_MAX,
+ };
+
+ clocksource_register_hz(&timerdrv->cs, NSEC_PER_SEC);
+
+ ret = request_irq(irq, goldfish_timer_irq, IRQF_TIMER,
+ "goldfish_timer", timerdrv);
+ if (ret) {
+ pr_err("Couldn't register goldfish-timer interrupt\n");
+ return ret;
+ }
+
+ clockevents_config_and_register(&timerdrv->ced, NSEC_PER_SEC,
+ 1, 0xffffffff);
+
+ return 0;
+}
diff --git a/drivers/clocksource/timer-gx6605s.c b/drivers/clocksource/timer-gx6605s.c
new file mode 100644
index 0000000000..8d386adbe8
--- /dev/null
+++ b/drivers/clocksource/timer-gx6605s.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/sched_clock.h>
+
+#include "timer-of.h"
+
+#define CLKSRC_OFFSET 0x40
+
+#define TIMER_STATUS 0x00
+#define TIMER_VALUE 0x04
+#define TIMER_CONTRL 0x10
+#define TIMER_CONFIG 0x20
+#define TIMER_DIV 0x24
+#define TIMER_INI 0x28
+
+#define GX6605S_STATUS_CLR BIT(0)
+#define GX6605S_CONTRL_RST BIT(0)
+#define GX6605S_CONTRL_START BIT(1)
+#define GX6605S_CONFIG_EN BIT(0)
+#define GX6605S_CONFIG_IRQ_EN BIT(1)
+
+static irqreturn_t gx6605s_timer_interrupt(int irq, void *dev)
+{
+ struct clock_event_device *ce = dev;
+ void __iomem *base = timer_of_base(to_timer_of(ce));
+
+ writel_relaxed(GX6605S_STATUS_CLR, base + TIMER_STATUS);
+ writel_relaxed(0, base + TIMER_INI);
+
+ ce->event_handler(ce);
+
+ return IRQ_HANDLED;
+}
+
+static int gx6605s_timer_set_oneshot(struct clock_event_device *ce)
+{
+ void __iomem *base = timer_of_base(to_timer_of(ce));
+
+ /* reset and stop counter */
+ writel_relaxed(GX6605S_CONTRL_RST, base + TIMER_CONTRL);
+
+ /* enable with irq and start */
+ writel_relaxed(GX6605S_CONFIG_EN | GX6605S_CONFIG_IRQ_EN,
+ base + TIMER_CONFIG);
+
+ return 0;
+}
+
+static int gx6605s_timer_set_next_event(unsigned long delta,
+ struct clock_event_device *ce)
+{
+ void __iomem *base = timer_of_base(to_timer_of(ce));
+
+ /* use reset to pause timer */
+ writel_relaxed(GX6605S_CONTRL_RST, base + TIMER_CONTRL);
+
+ /* config next timeout value */
+ writel_relaxed(ULONG_MAX - delta, base + TIMER_INI);
+ writel_relaxed(GX6605S_CONTRL_START, base + TIMER_CONTRL);
+
+ return 0;
+}
+
+static int gx6605s_timer_shutdown(struct clock_event_device *ce)
+{
+ void __iomem *base = timer_of_base(to_timer_of(ce));
+
+ writel_relaxed(0, base + TIMER_CONTRL);
+ writel_relaxed(0, base + TIMER_CONFIG);
+
+ return 0;
+}
+
+static struct timer_of to = {
+ .flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
+ .clkevt = {
+ .rating = 300,
+ .features = CLOCK_EVT_FEAT_DYNIRQ |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_shutdown = gx6605s_timer_shutdown,
+ .set_state_oneshot = gx6605s_timer_set_oneshot,
+ .set_next_event = gx6605s_timer_set_next_event,
+ .cpumask = cpu_possible_mask,
+ },
+ .of_irq = {
+ .handler = gx6605s_timer_interrupt,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ },
+};
+
+static u64 notrace gx6605s_sched_clock_read(void)
+{
+ void __iomem *base;
+
+ base = timer_of_base(&to) + CLKSRC_OFFSET;
+
+ return (u64)readl_relaxed(base + TIMER_VALUE);
+}
+
+static void gx6605s_clkevt_init(void __iomem *base)
+{
+ writel_relaxed(0, base + TIMER_DIV);
+ writel_relaxed(0, base + TIMER_CONFIG);
+
+ clockevents_config_and_register(&to.clkevt, timer_of_rate(&to), 2,
+ ULONG_MAX);
+}
+
+static int gx6605s_clksrc_init(void __iomem *base)
+{
+ writel_relaxed(0, base + TIMER_DIV);
+ writel_relaxed(0, base + TIMER_INI);
+
+ writel_relaxed(GX6605S_CONTRL_RST, base + TIMER_CONTRL);
+
+ writel_relaxed(GX6605S_CONFIG_EN, base + TIMER_CONFIG);
+
+ writel_relaxed(GX6605S_CONTRL_START, base + TIMER_CONTRL);
+
+ sched_clock_register(gx6605s_sched_clock_read, 32, timer_of_rate(&to));
+
+ return clocksource_mmio_init(base + TIMER_VALUE, "gx6605s",
+ timer_of_rate(&to), 200, 32, clocksource_mmio_readl_up);
+}
+
+static int __init gx6605s_timer_init(struct device_node *np)
+{
+ int ret;
+
+ /*
+ * The timer driver is for nationalchip gx6605s SOC and there are two
+ * same timer in gx6605s. We use one for clkevt and another for clksrc.
+ *
+ * The timer is mmio map to access, so we need give mmio address in dts.
+ *
+ * It provides a 32bit countup timer and interrupt will be caused by
+ * count-overflow.
+ * So we need set-next-event by ULONG_MAX - delta in TIMER_INI reg.
+ *
+ * The counter at 0x0 offset is clock event.
+ * The counter at 0x40 offset is clock source.
+ * They are the same in hardware, just different used by driver.
+ */
+ ret = timer_of_init(np, &to);
+ if (ret)
+ return ret;
+
+ gx6605s_clkevt_init(timer_of_base(&to));
+
+ return gx6605s_clksrc_init(timer_of_base(&to) + CLKSRC_OFFSET);
+}
+TIMER_OF_DECLARE(csky_gx6605s_timer, "csky,gx6605s-timer", gx6605s_timer_init);
diff --git a/drivers/clocksource/timer-gxp.c b/drivers/clocksource/timer-gxp.c
new file mode 100644
index 0000000000..57aa2e2cce
--- /dev/null
+++ b/drivers/clocksource/timer-gxp.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/sched_clock.h>
+
+#define TIMER0_FREQ 1000000
+#define GXP_TIMER_CNT_OFS 0x00
+#define GXP_TIMESTAMP_OFS 0x08
+#define GXP_TIMER_CTRL_OFS 0x14
+
+/* TCS Stands for Timer Control/Status: these are masks to be used in */
+/* the Timer Count Registers */
+#define MASK_TCS_ENABLE 0x01
+#define MASK_TCS_PERIOD 0x02
+#define MASK_TCS_RELOAD 0x04
+#define MASK_TCS_TC 0x80
+
+struct gxp_timer {
+ void __iomem *counter;
+ void __iomem *control;
+ struct clock_event_device evt;
+};
+
+static struct gxp_timer *gxp_timer;
+
+static void __iomem *system_clock __ro_after_init;
+
+static inline struct gxp_timer *to_gxp_timer(struct clock_event_device *evt_dev)
+{
+ return container_of(evt_dev, struct gxp_timer, evt);
+}
+
+static u64 notrace gxp_sched_read(void)
+{
+ return readl_relaxed(system_clock);
+}
+
+static int gxp_time_set_next_event(unsigned long event, struct clock_event_device *evt_dev)
+{
+ struct gxp_timer *timer = to_gxp_timer(evt_dev);
+
+ /* Stop counting and disable interrupt before updating */
+ writeb_relaxed(MASK_TCS_TC, timer->control);
+ writel_relaxed(event, timer->counter);
+ writeb_relaxed(MASK_TCS_TC | MASK_TCS_ENABLE, timer->control);
+
+ return 0;
+}
+
+static irqreturn_t gxp_timer_interrupt(int irq, void *dev_id)
+{
+ struct gxp_timer *timer = (struct gxp_timer *)dev_id;
+
+ if (!(readb_relaxed(timer->control) & MASK_TCS_TC))
+ return IRQ_NONE;
+
+ writeb_relaxed(MASK_TCS_TC, timer->control);
+
+ timer->evt.event_handler(&timer->evt);
+
+ return IRQ_HANDLED;
+}
+
+static int __init gxp_timer_init(struct device_node *node)
+{
+ void __iomem *base;
+ struct clk *clk;
+ u32 freq;
+ int ret, irq;
+
+ gxp_timer = kzalloc(sizeof(*gxp_timer), GFP_KERNEL);
+ if (!gxp_timer) {
+ ret = -ENOMEM;
+ pr_err("Can't allocate gxp_timer");
+ return ret;
+ }
+
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ ret = (int)PTR_ERR(clk);
+ pr_err("%pOFn clock not found: %d\n", node, ret);
+ goto err_free;
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("%pOFn clock enable failed: %d\n", node, ret);
+ goto err_clk_enable;
+ }
+
+ base = of_iomap(node, 0);
+ if (!base) {
+ ret = -ENXIO;
+ pr_err("Can't map timer base registers");
+ goto err_iomap;
+ }
+
+ /* Set the offsets to the clock register and timer registers */
+ gxp_timer->counter = base + GXP_TIMER_CNT_OFS;
+ gxp_timer->control = base + GXP_TIMER_CTRL_OFS;
+ system_clock = base + GXP_TIMESTAMP_OFS;
+
+ gxp_timer->evt.name = node->name;
+ gxp_timer->evt.rating = 300;
+ gxp_timer->evt.features = CLOCK_EVT_FEAT_ONESHOT;
+ gxp_timer->evt.set_next_event = gxp_time_set_next_event;
+ gxp_timer->evt.cpumask = cpumask_of(0);
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq <= 0) {
+ ret = -EINVAL;
+ pr_err("GXP Timer Can't parse IRQ %d", irq);
+ goto err_exit;
+ }
+
+ freq = clk_get_rate(clk);
+
+ ret = clocksource_mmio_init(system_clock, node->name, freq,
+ 300, 32, clocksource_mmio_readl_up);
+ if (ret) {
+ pr_err("%pOFn init clocksource failed: %d", node, ret);
+ goto err_exit;
+ }
+
+ sched_clock_register(gxp_sched_read, 32, freq);
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq <= 0) {
+ ret = -EINVAL;
+ pr_err("%pOFn Can't parse IRQ %d", node, irq);
+ goto err_exit;
+ }
+
+ clockevents_config_and_register(&gxp_timer->evt, TIMER0_FREQ,
+ 0xf, 0xffffffff);
+
+ ret = request_irq(irq, gxp_timer_interrupt, IRQF_TIMER | IRQF_SHARED,
+ node->name, gxp_timer);
+ if (ret) {
+ pr_err("%pOFn request_irq() failed: %d", node, ret);
+ goto err_exit;
+ }
+
+ pr_debug("gxp: system timer (irq = %d)\n", irq);
+ return 0;
+
+err_exit:
+ iounmap(base);
+err_iomap:
+ clk_disable_unprepare(clk);
+err_clk_enable:
+ clk_put(clk);
+err_free:
+ kfree(gxp_timer);
+ return ret;
+}
+
+/*
+ * This probe gets called after the timer is already up and running. This will create
+ * the watchdog device as a child since the registers are shared.
+ */
+
+static int gxp_timer_probe(struct platform_device *pdev)
+{
+ struct platform_device *gxp_watchdog_device;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ if (!gxp_timer) {
+ pr_err("Gxp Timer not initialized, cannot create watchdog");
+ return -ENOMEM;
+ }
+
+ gxp_watchdog_device = platform_device_alloc("gxp-wdt", -1);
+ if (!gxp_watchdog_device) {
+ pr_err("Timer failed to allocate gxp-wdt");
+ return -ENOMEM;
+ }
+
+ /* Pass the base address (counter) as platform data and nothing else */
+ gxp_watchdog_device->dev.platform_data = gxp_timer->counter;
+ gxp_watchdog_device->dev.parent = dev;
+
+ ret = platform_device_add(gxp_watchdog_device);
+ if (ret)
+ platform_device_put(gxp_watchdog_device);
+
+ return ret;
+}
+
+static const struct of_device_id gxp_timer_of_match[] = {
+ { .compatible = "hpe,gxp-timer", },
+ {},
+};
+
+static struct platform_driver gxp_timer_driver = {
+ .probe = gxp_timer_probe,
+ .driver = {
+ .name = "gxp-timer",
+ .of_match_table = gxp_timer_of_match,
+ .suppress_bind_attrs = true,
+ },
+};
+
+builtin_platform_driver(gxp_timer_driver);
+
+TIMER_OF_DECLARE(gxp, "hpe,gxp-timer", gxp_timer_init);
diff --git a/drivers/clocksource/timer-imx-gpt.c b/drivers/clocksource/timer-imx-gpt.c
new file mode 100644
index 0000000000..6a878d227a
--- /dev/null
+++ b/drivers/clocksource/timer-imx-gpt.c
@@ -0,0 +1,512 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2000-2001 Deep Blue Solutions
+// Copyright (C) 2002 Shane Nay (shane@minirl.com)
+// Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
+// Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+/*
+ * There are 4 versions of the timer hardware on Freescale MXC hardware.
+ * - MX1/MXL
+ * - MX21, MX27.
+ * - MX25, MX31, MX35, MX37, MX51, MX6Q(rev1.0)
+ * - MX6DL, MX6SX, MX6Q(rev1.1+)
+ */
+enum imx_gpt_type {
+ GPT_TYPE_IMX1, /* i.MX1 */
+ GPT_TYPE_IMX21, /* i.MX21/27 */
+ GPT_TYPE_IMX31, /* i.MX31/35/25/37/51/6Q */
+ GPT_TYPE_IMX6DL, /* i.MX6DL/SX/SL */
+};
+
+/* defines common for all i.MX */
+#define MXC_TCTL 0x00
+#define MXC_TCTL_TEN (1 << 0) /* Enable module */
+#define MXC_TPRER 0x04
+
+/* MX1, MX21, MX27 */
+#define MX1_2_TCTL_CLK_PCLK1 (1 << 1)
+#define MX1_2_TCTL_IRQEN (1 << 4)
+#define MX1_2_TCTL_FRR (1 << 8)
+#define MX1_2_TCMP 0x08
+#define MX1_2_TCN 0x10
+#define MX1_2_TSTAT 0x14
+
+/* MX21, MX27 */
+#define MX2_TSTAT_CAPT (1 << 1)
+#define MX2_TSTAT_COMP (1 << 0)
+
+/* MX31, MX35, MX25, MX5, MX6 */
+#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */
+#define V2_TCTL_CLK_IPG (1 << 6)
+#define V2_TCTL_CLK_PER (2 << 6)
+#define V2_TCTL_CLK_OSC_DIV8 (5 << 6)
+#define V2_TCTL_FRR (1 << 9)
+#define V2_TCTL_24MEN (1 << 10)
+#define V2_TPRER_PRE24M 12
+#define V2_IR 0x0c
+#define V2_TSTAT 0x08
+#define V2_TSTAT_OF1 (1 << 0)
+#define V2_TCN 0x24
+#define V2_TCMP 0x10
+
+#define V2_TIMER_RATE_OSC_DIV8 3000000
+
+struct imx_timer {
+ enum imx_gpt_type type;
+ void __iomem *base;
+ int irq;
+ struct clk *clk_per;
+ struct clk *clk_ipg;
+ const struct imx_gpt_data *gpt;
+ struct clock_event_device ced;
+};
+
+struct imx_gpt_data {
+ int reg_tstat;
+ int reg_tcn;
+ int reg_tcmp;
+ void (*gpt_setup_tctl)(struct imx_timer *imxtm);
+ void (*gpt_irq_enable)(struct imx_timer *imxtm);
+ void (*gpt_irq_disable)(struct imx_timer *imxtm);
+ void (*gpt_irq_acknowledge)(struct imx_timer *imxtm);
+ int (*set_next_event)(unsigned long evt,
+ struct clock_event_device *ced);
+};
+
+static inline struct imx_timer *to_imx_timer(struct clock_event_device *ced)
+{
+ return container_of(ced, struct imx_timer, ced);
+}
+
+static void imx1_gpt_irq_disable(struct imx_timer *imxtm)
+{
+ unsigned int tmp;
+
+ tmp = readl_relaxed(imxtm->base + MXC_TCTL);
+ writel_relaxed(tmp & ~MX1_2_TCTL_IRQEN, imxtm->base + MXC_TCTL);
+}
+
+static void imx31_gpt_irq_disable(struct imx_timer *imxtm)
+{
+ writel_relaxed(0, imxtm->base + V2_IR);
+}
+
+static void imx1_gpt_irq_enable(struct imx_timer *imxtm)
+{
+ unsigned int tmp;
+
+ tmp = readl_relaxed(imxtm->base + MXC_TCTL);
+ writel_relaxed(tmp | MX1_2_TCTL_IRQEN, imxtm->base + MXC_TCTL);
+}
+
+static void imx31_gpt_irq_enable(struct imx_timer *imxtm)
+{
+ writel_relaxed(1<<0, imxtm->base + V2_IR);
+}
+
+static void imx1_gpt_irq_acknowledge(struct imx_timer *imxtm)
+{
+ writel_relaxed(0, imxtm->base + MX1_2_TSTAT);
+}
+
+static void imx21_gpt_irq_acknowledge(struct imx_timer *imxtm)
+{
+ writel_relaxed(MX2_TSTAT_CAPT | MX2_TSTAT_COMP,
+ imxtm->base + MX1_2_TSTAT);
+}
+
+static void imx31_gpt_irq_acknowledge(struct imx_timer *imxtm)
+{
+ writel_relaxed(V2_TSTAT_OF1, imxtm->base + V2_TSTAT);
+}
+
+static void __iomem *sched_clock_reg;
+
+static u64 notrace mxc_read_sched_clock(void)
+{
+ return sched_clock_reg ? readl_relaxed(sched_clock_reg) : 0;
+}
+
+#if defined(CONFIG_ARM)
+static struct delay_timer imx_delay_timer;
+
+static unsigned long imx_read_current_timer(void)
+{
+ return readl_relaxed(sched_clock_reg);
+}
+#endif
+
+static int __init mxc_clocksource_init(struct imx_timer *imxtm)
+{
+ unsigned int c = clk_get_rate(imxtm->clk_per);
+ void __iomem *reg = imxtm->base + imxtm->gpt->reg_tcn;
+
+#if defined(CONFIG_ARM)
+ imx_delay_timer.read_current_timer = &imx_read_current_timer;
+ imx_delay_timer.freq = c;
+ register_current_timer_delay(&imx_delay_timer);
+#endif
+
+ sched_clock_reg = reg;
+
+ sched_clock_register(mxc_read_sched_clock, 32, c);
+ return clocksource_mmio_init(reg, "mxc_timer1", c, 200, 32,
+ clocksource_mmio_readl_up);
+}
+
+/* clock event */
+
+static int mx1_2_set_next_event(unsigned long evt,
+ struct clock_event_device *ced)
+{
+ struct imx_timer *imxtm = to_imx_timer(ced);
+ unsigned long tcmp;
+
+ tcmp = readl_relaxed(imxtm->base + MX1_2_TCN) + evt;
+
+ writel_relaxed(tcmp, imxtm->base + MX1_2_TCMP);
+
+ return (int)(tcmp - readl_relaxed(imxtm->base + MX1_2_TCN)) < 0 ?
+ -ETIME : 0;
+}
+
+static int v2_set_next_event(unsigned long evt,
+ struct clock_event_device *ced)
+{
+ struct imx_timer *imxtm = to_imx_timer(ced);
+ unsigned long tcmp;
+
+ tcmp = readl_relaxed(imxtm->base + V2_TCN) + evt;
+
+ writel_relaxed(tcmp, imxtm->base + V2_TCMP);
+
+ return evt < 0x7fffffff &&
+ (int)(tcmp - readl_relaxed(imxtm->base + V2_TCN)) < 0 ?
+ -ETIME : 0;
+}
+
+static int mxc_shutdown(struct clock_event_device *ced)
+{
+ struct imx_timer *imxtm = to_imx_timer(ced);
+ u32 tcn;
+
+ /* Disable interrupt in GPT module */
+ imxtm->gpt->gpt_irq_disable(imxtm);
+
+ tcn = readl_relaxed(imxtm->base + imxtm->gpt->reg_tcn);
+ /* Set event time into far-far future */
+ writel_relaxed(tcn - 3, imxtm->base + imxtm->gpt->reg_tcmp);
+
+ /* Clear pending interrupt */
+ imxtm->gpt->gpt_irq_acknowledge(imxtm);
+
+#ifdef DEBUG
+ printk(KERN_INFO "%s: changing mode\n", __func__);
+#endif /* DEBUG */
+
+ return 0;
+}
+
+static int mxc_set_oneshot(struct clock_event_device *ced)
+{
+ struct imx_timer *imxtm = to_imx_timer(ced);
+
+ /* Disable interrupt in GPT module */
+ imxtm->gpt->gpt_irq_disable(imxtm);
+
+ if (!clockevent_state_oneshot(ced)) {
+ u32 tcn = readl_relaxed(imxtm->base + imxtm->gpt->reg_tcn);
+ /* Set event time into far-far future */
+ writel_relaxed(tcn - 3, imxtm->base + imxtm->gpt->reg_tcmp);
+
+ /* Clear pending interrupt */
+ imxtm->gpt->gpt_irq_acknowledge(imxtm);
+ }
+
+#ifdef DEBUG
+ printk(KERN_INFO "%s: changing mode\n", __func__);
+#endif /* DEBUG */
+
+ /*
+ * Do not put overhead of interrupt enable/disable into
+ * mxc_set_next_event(), the core has about 4 minutes
+ * to call mxc_set_next_event() or shutdown clock after
+ * mode switching
+ */
+ imxtm->gpt->gpt_irq_enable(imxtm);
+
+ return 0;
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *ced = dev_id;
+ struct imx_timer *imxtm = to_imx_timer(ced);
+ uint32_t tstat;
+
+ tstat = readl_relaxed(imxtm->base + imxtm->gpt->reg_tstat);
+
+ imxtm->gpt->gpt_irq_acknowledge(imxtm);
+
+ ced->event_handler(ced);
+
+ return IRQ_HANDLED;
+}
+
+static int __init mxc_clockevent_init(struct imx_timer *imxtm)
+{
+ struct clock_event_device *ced = &imxtm->ced;
+
+ ced->name = "mxc_timer1";
+ ced->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ;
+ ced->set_state_shutdown = mxc_shutdown;
+ ced->set_state_oneshot = mxc_set_oneshot;
+ ced->tick_resume = mxc_shutdown;
+ ced->set_next_event = imxtm->gpt->set_next_event;
+ ced->rating = 200;
+ ced->cpumask = cpumask_of(0);
+ ced->irq = imxtm->irq;
+ clockevents_config_and_register(ced, clk_get_rate(imxtm->clk_per),
+ 0xff, 0xfffffffe);
+
+ return request_irq(imxtm->irq, mxc_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "i.MX Timer Tick", ced);
+}
+
+static void imx1_gpt_setup_tctl(struct imx_timer *imxtm)
+{
+ u32 tctl_val;
+
+ tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
+ writel_relaxed(tctl_val, imxtm->base + MXC_TCTL);
+}
+
+static void imx31_gpt_setup_tctl(struct imx_timer *imxtm)
+{
+ u32 tctl_val;
+
+ tctl_val = V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
+ if (clk_get_rate(imxtm->clk_per) == V2_TIMER_RATE_OSC_DIV8)
+ tctl_val |= V2_TCTL_CLK_OSC_DIV8;
+ else
+ tctl_val |= V2_TCTL_CLK_PER;
+
+ writel_relaxed(tctl_val, imxtm->base + MXC_TCTL);
+}
+
+static void imx6dl_gpt_setup_tctl(struct imx_timer *imxtm)
+{
+ u32 tctl_val;
+
+ tctl_val = V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
+ if (clk_get_rate(imxtm->clk_per) == V2_TIMER_RATE_OSC_DIV8) {
+ tctl_val |= V2_TCTL_CLK_OSC_DIV8;
+ /* 24 / 8 = 3 MHz */
+ writel_relaxed(7 << V2_TPRER_PRE24M, imxtm->base + MXC_TPRER);
+ tctl_val |= V2_TCTL_24MEN;
+ } else {
+ tctl_val |= V2_TCTL_CLK_PER;
+ }
+
+ writel_relaxed(tctl_val, imxtm->base + MXC_TCTL);
+}
+
+static const struct imx_gpt_data imx1_gpt_data = {
+ .reg_tstat = MX1_2_TSTAT,
+ .reg_tcn = MX1_2_TCN,
+ .reg_tcmp = MX1_2_TCMP,
+ .gpt_irq_enable = imx1_gpt_irq_enable,
+ .gpt_irq_disable = imx1_gpt_irq_disable,
+ .gpt_irq_acknowledge = imx1_gpt_irq_acknowledge,
+ .gpt_setup_tctl = imx1_gpt_setup_tctl,
+ .set_next_event = mx1_2_set_next_event,
+};
+
+static const struct imx_gpt_data imx21_gpt_data = {
+ .reg_tstat = MX1_2_TSTAT,
+ .reg_tcn = MX1_2_TCN,
+ .reg_tcmp = MX1_2_TCMP,
+ .gpt_irq_enable = imx1_gpt_irq_enable,
+ .gpt_irq_disable = imx1_gpt_irq_disable,
+ .gpt_irq_acknowledge = imx21_gpt_irq_acknowledge,
+ .gpt_setup_tctl = imx1_gpt_setup_tctl,
+ .set_next_event = mx1_2_set_next_event,
+};
+
+static const struct imx_gpt_data imx31_gpt_data = {
+ .reg_tstat = V2_TSTAT,
+ .reg_tcn = V2_TCN,
+ .reg_tcmp = V2_TCMP,
+ .gpt_irq_enable = imx31_gpt_irq_enable,
+ .gpt_irq_disable = imx31_gpt_irq_disable,
+ .gpt_irq_acknowledge = imx31_gpt_irq_acknowledge,
+ .gpt_setup_tctl = imx31_gpt_setup_tctl,
+ .set_next_event = v2_set_next_event,
+};
+
+static const struct imx_gpt_data imx6dl_gpt_data = {
+ .reg_tstat = V2_TSTAT,
+ .reg_tcn = V2_TCN,
+ .reg_tcmp = V2_TCMP,
+ .gpt_irq_enable = imx31_gpt_irq_enable,
+ .gpt_irq_disable = imx31_gpt_irq_disable,
+ .gpt_irq_acknowledge = imx31_gpt_irq_acknowledge,
+ .gpt_setup_tctl = imx6dl_gpt_setup_tctl,
+ .set_next_event = v2_set_next_event,
+};
+
+static int __init _mxc_timer_init(struct imx_timer *imxtm)
+{
+ int ret;
+
+ switch (imxtm->type) {
+ case GPT_TYPE_IMX1:
+ imxtm->gpt = &imx1_gpt_data;
+ break;
+ case GPT_TYPE_IMX21:
+ imxtm->gpt = &imx21_gpt_data;
+ break;
+ case GPT_TYPE_IMX31:
+ imxtm->gpt = &imx31_gpt_data;
+ break;
+ case GPT_TYPE_IMX6DL:
+ imxtm->gpt = &imx6dl_gpt_data;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (IS_ERR(imxtm->clk_per)) {
+ pr_err("i.MX timer: unable to get clk\n");
+ return PTR_ERR(imxtm->clk_per);
+ }
+
+ if (!IS_ERR(imxtm->clk_ipg))
+ clk_prepare_enable(imxtm->clk_ipg);
+
+ clk_prepare_enable(imxtm->clk_per);
+
+ /*
+ * Initialise to a known state (all timers off, and timing reset)
+ */
+
+ writel_relaxed(0, imxtm->base + MXC_TCTL);
+ writel_relaxed(0, imxtm->base + MXC_TPRER); /* see datasheet note */
+
+ imxtm->gpt->gpt_setup_tctl(imxtm);
+
+ /* init and register the timer to the framework */
+ ret = mxc_clocksource_init(imxtm);
+ if (ret)
+ return ret;
+
+ return mxc_clockevent_init(imxtm);
+}
+
+static int __init mxc_timer_init_dt(struct device_node *np, enum imx_gpt_type type)
+{
+ struct imx_timer *imxtm;
+ static int initialized;
+ int ret;
+
+ /* Support one instance only */
+ if (initialized)
+ return 0;
+
+ imxtm = kzalloc(sizeof(*imxtm), GFP_KERNEL);
+ if (!imxtm)
+ return -ENOMEM;
+
+ imxtm->base = of_iomap(np, 0);
+ if (!imxtm->base) {
+ ret = -ENXIO;
+ goto err_kfree;
+ }
+
+ imxtm->irq = irq_of_parse_and_map(np, 0);
+ if (imxtm->irq <= 0) {
+ ret = -EINVAL;
+ goto err_kfree;
+ }
+
+ imxtm->clk_ipg = of_clk_get_by_name(np, "ipg");
+
+ /* Try osc_per first, and fall back to per otherwise */
+ imxtm->clk_per = of_clk_get_by_name(np, "osc_per");
+ if (IS_ERR(imxtm->clk_per))
+ imxtm->clk_per = of_clk_get_by_name(np, "per");
+
+ imxtm->type = type;
+
+ ret = _mxc_timer_init(imxtm);
+ if (ret)
+ goto err_kfree;
+
+ initialized = 1;
+
+ return 0;
+
+err_kfree:
+ kfree(imxtm);
+ return ret;
+}
+
+static int __init imx1_timer_init_dt(struct device_node *np)
+{
+ return mxc_timer_init_dt(np, GPT_TYPE_IMX1);
+}
+
+static int __init imx21_timer_init_dt(struct device_node *np)
+{
+ return mxc_timer_init_dt(np, GPT_TYPE_IMX21);
+}
+
+static int __init imx31_timer_init_dt(struct device_node *np)
+{
+ enum imx_gpt_type type = GPT_TYPE_IMX31;
+
+ /*
+ * We were using the same compatible string for i.MX6Q/D and i.MX6DL/S
+ * GPT device, while they actually have different programming model.
+ * This is a workaround to keep the existing i.MX6DL/S DTBs continue
+ * working with the new kernel.
+ */
+ if (of_machine_is_compatible("fsl,imx6dl"))
+ type = GPT_TYPE_IMX6DL;
+
+ return mxc_timer_init_dt(np, type);
+}
+
+static int __init imx6dl_timer_init_dt(struct device_node *np)
+{
+ return mxc_timer_init_dt(np, GPT_TYPE_IMX6DL);
+}
+
+TIMER_OF_DECLARE(imx1_timer, "fsl,imx1-gpt", imx1_timer_init_dt);
+TIMER_OF_DECLARE(imx21_timer, "fsl,imx21-gpt", imx21_timer_init_dt);
+TIMER_OF_DECLARE(imx27_timer, "fsl,imx27-gpt", imx21_timer_init_dt);
+TIMER_OF_DECLARE(imx31_timer, "fsl,imx31-gpt", imx31_timer_init_dt);
+TIMER_OF_DECLARE(imx25_timer, "fsl,imx25-gpt", imx31_timer_init_dt);
+TIMER_OF_DECLARE(imx50_timer, "fsl,imx50-gpt", imx31_timer_init_dt);
+TIMER_OF_DECLARE(imx51_timer, "fsl,imx51-gpt", imx31_timer_init_dt);
+TIMER_OF_DECLARE(imx53_timer, "fsl,imx53-gpt", imx31_timer_init_dt);
+TIMER_OF_DECLARE(imx6q_timer, "fsl,imx6q-gpt", imx31_timer_init_dt);
+TIMER_OF_DECLARE(imx6dl_timer, "fsl,imx6dl-gpt", imx6dl_timer_init_dt);
+TIMER_OF_DECLARE(imx6sl_timer, "fsl,imx6sl-gpt", imx6dl_timer_init_dt);
+TIMER_OF_DECLARE(imx6sx_timer, "fsl,imx6sx-gpt", imx6dl_timer_init_dt);
diff --git a/drivers/clocksource/timer-imx-sysctr.c b/drivers/clocksource/timer-imx-sysctr.c
new file mode 100644
index 0000000000..5a7a951c4e
--- /dev/null
+++ b/drivers/clocksource/timer-imx-sysctr.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2017-2019 NXP
+
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+
+#include "timer-of.h"
+
+#define CMP_OFFSET 0x10000
+
+#define CNTCV_LO 0x8
+#define CNTCV_HI 0xc
+#define CMPCV_LO (CMP_OFFSET + 0x20)
+#define CMPCV_HI (CMP_OFFSET + 0x24)
+#define CMPCR (CMP_OFFSET + 0x2c)
+
+#define SYS_CTR_EN 0x1
+#define SYS_CTR_IRQ_MASK 0x2
+
+#define SYS_CTR_CLK_DIV 0x3
+
+static void __iomem *sys_ctr_base __ro_after_init;
+static u32 cmpcr __ro_after_init;
+
+static void sysctr_timer_enable(bool enable)
+{
+ writel(enable ? cmpcr | SYS_CTR_EN : cmpcr, sys_ctr_base + CMPCR);
+}
+
+static void sysctr_irq_acknowledge(void)
+{
+ /*
+ * clear the enable bit(EN =0) will clear
+ * the status bit(ISTAT = 0), then the interrupt
+ * signal will be negated(acknowledged).
+ */
+ sysctr_timer_enable(false);
+}
+
+static inline u64 sysctr_read_counter(void)
+{
+ u32 cnt_hi, tmp_hi, cnt_lo;
+
+ do {
+ cnt_hi = readl_relaxed(sys_ctr_base + CNTCV_HI);
+ cnt_lo = readl_relaxed(sys_ctr_base + CNTCV_LO);
+ tmp_hi = readl_relaxed(sys_ctr_base + CNTCV_HI);
+ } while (tmp_hi != cnt_hi);
+
+ return ((u64) cnt_hi << 32) | cnt_lo;
+}
+
+static int sysctr_set_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ u32 cmp_hi, cmp_lo;
+ u64 next;
+
+ sysctr_timer_enable(false);
+
+ next = sysctr_read_counter();
+
+ next += delta;
+
+ cmp_hi = (next >> 32) & 0x00fffff;
+ cmp_lo = next & 0xffffffff;
+
+ writel_relaxed(cmp_hi, sys_ctr_base + CMPCV_HI);
+ writel_relaxed(cmp_lo, sys_ctr_base + CMPCV_LO);
+
+ sysctr_timer_enable(true);
+
+ return 0;
+}
+
+static int sysctr_set_state_oneshot(struct clock_event_device *evt)
+{
+ return 0;
+}
+
+static int sysctr_set_state_shutdown(struct clock_event_device *evt)
+{
+ sysctr_timer_enable(false);
+
+ return 0;
+}
+
+static irqreturn_t sysctr_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ sysctr_irq_acknowledge();
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct timer_of to_sysctr = {
+ .flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE,
+ .clkevt = {
+ .name = "i.MX system counter timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_DYNIRQ,
+ .set_state_oneshot = sysctr_set_state_oneshot,
+ .set_next_event = sysctr_set_next_event,
+ .set_state_shutdown = sysctr_set_state_shutdown,
+ .rating = 200,
+ },
+ .of_irq = {
+ .handler = sysctr_timer_interrupt,
+ .flags = IRQF_TIMER,
+ },
+ .of_clk = {
+ .name = "per",
+ },
+};
+
+static void __init sysctr_clockevent_init(void)
+{
+ to_sysctr.clkevt.cpumask = cpu_possible_mask;
+
+ clockevents_config_and_register(&to_sysctr.clkevt,
+ timer_of_rate(&to_sysctr),
+ 0xff, 0x7fffffff);
+}
+
+static int __init sysctr_timer_init(struct device_node *np)
+{
+ int ret = 0;
+
+ ret = timer_of_init(np, &to_sysctr);
+ if (ret)
+ return ret;
+
+ if (!of_property_read_bool(np, "nxp,no-divider")) {
+ /* system counter clock is divided by 3 internally */
+ to_sysctr.of_clk.rate /= SYS_CTR_CLK_DIV;
+ }
+
+ sys_ctr_base = timer_of_base(&to_sysctr);
+ cmpcr = readl(sys_ctr_base + CMPCR);
+ cmpcr &= ~SYS_CTR_EN;
+
+ sysctr_clockevent_init();
+
+ return 0;
+}
+TIMER_OF_DECLARE(sysctr_timer, "nxp,sysctr-timer", sysctr_timer_init);
diff --git a/drivers/clocksource/timer-imx-tpm.c b/drivers/clocksource/timer-imx-tpm.c
new file mode 100644
index 0000000000..bd64a8a842
--- /dev/null
+++ b/drivers/clocksource/timer-imx-tpm.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+// Copyright 2017 NXP
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/sched_clock.h>
+
+#include "timer-of.h"
+
+#define TPM_PARAM 0x4
+#define TPM_PARAM_WIDTH_SHIFT 16
+#define TPM_PARAM_WIDTH_MASK (0xff << 16)
+#define TPM_SC 0x10
+#define TPM_SC_CMOD_INC_PER_CNT (0x1 << 3)
+#define TPM_SC_CMOD_DIV_DEFAULT 0x3
+#define TPM_SC_CMOD_DIV_MAX 0x7
+#define TPM_SC_TOF_MASK (0x1 << 7)
+#define TPM_CNT 0x14
+#define TPM_MOD 0x18
+#define TPM_STATUS 0x1c
+#define TPM_STATUS_CH0F BIT(0)
+#define TPM_C0SC 0x20
+#define TPM_C0SC_CHIE BIT(6)
+#define TPM_C0SC_MODE_SHIFT 2
+#define TPM_C0SC_MODE_MASK 0x3c
+#define TPM_C0SC_MODE_SW_COMPARE 0x4
+#define TPM_C0SC_CHF_MASK (0x1 << 7)
+#define TPM_C0V 0x24
+
+static int counter_width __ro_after_init;
+static void __iomem *timer_base __ro_after_init;
+
+static inline void tpm_timer_disable(void)
+{
+ unsigned int val;
+
+ /* channel disable */
+ val = readl(timer_base + TPM_C0SC);
+ val &= ~(TPM_C0SC_MODE_MASK | TPM_C0SC_CHIE);
+ writel(val, timer_base + TPM_C0SC);
+}
+
+static inline void tpm_timer_enable(void)
+{
+ unsigned int val;
+
+ /* channel enabled in sw compare mode */
+ val = readl(timer_base + TPM_C0SC);
+ val |= (TPM_C0SC_MODE_SW_COMPARE << TPM_C0SC_MODE_SHIFT) |
+ TPM_C0SC_CHIE;
+ writel(val, timer_base + TPM_C0SC);
+}
+
+static inline void tpm_irq_acknowledge(void)
+{
+ writel(TPM_STATUS_CH0F, timer_base + TPM_STATUS);
+}
+
+static inline unsigned long tpm_read_counter(void)
+{
+ return readl(timer_base + TPM_CNT);
+}
+
+#if defined(CONFIG_ARM)
+static struct delay_timer tpm_delay_timer;
+
+static unsigned long tpm_read_current_timer(void)
+{
+ return tpm_read_counter();
+}
+
+static u64 notrace tpm_read_sched_clock(void)
+{
+ return tpm_read_counter();
+}
+#endif
+
+static int tpm_set_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ unsigned long next, now;
+
+ next = tpm_read_counter();
+ next += delta;
+ writel(next, timer_base + TPM_C0V);
+ now = tpm_read_counter();
+
+ /*
+ * NOTE: We observed in a very small probability, the bus fabric
+ * contention between GPU and A7 may results a few cycles delay
+ * of writing CNT registers which may cause the min_delta event got
+ * missed, so we need add a ETIME check here in case it happened.
+ */
+ return (int)(next - now) <= 0 ? -ETIME : 0;
+}
+
+static int tpm_set_state_oneshot(struct clock_event_device *evt)
+{
+ tpm_timer_enable();
+
+ return 0;
+}
+
+static int tpm_set_state_shutdown(struct clock_event_device *evt)
+{
+ tpm_timer_disable();
+
+ return 0;
+}
+
+static irqreturn_t tpm_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ tpm_irq_acknowledge();
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct timer_of to_tpm = {
+ .flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
+ .clkevt = {
+ .name = "i.MX TPM Timer",
+ .rating = 200,
+ .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ,
+ .set_state_shutdown = tpm_set_state_shutdown,
+ .set_state_oneshot = tpm_set_state_oneshot,
+ .set_next_event = tpm_set_next_event,
+ .cpumask = cpu_possible_mask,
+ },
+ .of_irq = {
+ .handler = tpm_timer_interrupt,
+ .flags = IRQF_TIMER,
+ },
+ .of_clk = {
+ .name = "per",
+ },
+};
+
+static int __init tpm_clocksource_init(void)
+{
+#if defined(CONFIG_ARM)
+ tpm_delay_timer.read_current_timer = &tpm_read_current_timer;
+ tpm_delay_timer.freq = timer_of_rate(&to_tpm) >> 3;
+ register_current_timer_delay(&tpm_delay_timer);
+
+ sched_clock_register(tpm_read_sched_clock, counter_width,
+ timer_of_rate(&to_tpm) >> 3);
+#endif
+
+ return clocksource_mmio_init(timer_base + TPM_CNT,
+ "imx-tpm",
+ timer_of_rate(&to_tpm) >> 3,
+ to_tpm.clkevt.rating,
+ counter_width,
+ clocksource_mmio_readl_up);
+}
+
+static void __init tpm_clockevent_init(void)
+{
+ clockevents_config_and_register(&to_tpm.clkevt,
+ timer_of_rate(&to_tpm) >> 3,
+ 300,
+ GENMASK(counter_width - 1,
+ 1));
+}
+
+static int __init tpm_timer_init(struct device_node *np)
+{
+ struct clk *ipg;
+ int ret;
+
+ ipg = of_clk_get_by_name(np, "ipg");
+ if (IS_ERR(ipg)) {
+ pr_err("tpm: failed to get ipg clk\n");
+ return -ENODEV;
+ }
+ /* enable clk before accessing registers */
+ ret = clk_prepare_enable(ipg);
+ if (ret) {
+ pr_err("tpm: ipg clock enable failed (%d)\n", ret);
+ clk_put(ipg);
+ return ret;
+ }
+
+ ret = timer_of_init(np, &to_tpm);
+ if (ret)
+ return ret;
+
+ timer_base = timer_of_base(&to_tpm);
+
+ counter_width = (readl(timer_base + TPM_PARAM)
+ & TPM_PARAM_WIDTH_MASK) >> TPM_PARAM_WIDTH_SHIFT;
+ /* use rating 200 for 32-bit counter and 150 for 16-bit counter */
+ to_tpm.clkevt.rating = counter_width == 0x20 ? 200 : 150;
+
+ /*
+ * Initialize tpm module to a known state
+ * 1) Counter disabled
+ * 2) TPM counter operates in up counting mode
+ * 3) Timer Overflow Interrupt disabled
+ * 4) Channel0 disabled
+ * 5) DMA transfers disabled
+ */
+ /* make sure counter is disabled */
+ writel(0, timer_base + TPM_SC);
+ /* TOF is W1C */
+ writel(TPM_SC_TOF_MASK, timer_base + TPM_SC);
+ writel(0, timer_base + TPM_CNT);
+ /* CHF is W1C */
+ writel(TPM_C0SC_CHF_MASK, timer_base + TPM_C0SC);
+
+ /*
+ * increase per cnt,
+ * div 8 for 32-bit counter and div 128 for 16-bit counter
+ */
+ writel(TPM_SC_CMOD_INC_PER_CNT |
+ (counter_width == 0x20 ?
+ TPM_SC_CMOD_DIV_DEFAULT : TPM_SC_CMOD_DIV_MAX),
+ timer_base + TPM_SC);
+
+ /* set MOD register to maximum for free running mode */
+ writel(GENMASK(counter_width - 1, 0), timer_base + TPM_MOD);
+
+ tpm_clockevent_init();
+
+ return tpm_clocksource_init();
+}
+TIMER_OF_DECLARE(imx7ulp, "fsl,imx7ulp-tpm", tpm_timer_init);
diff --git a/drivers/clocksource/timer-integrator-ap.c b/drivers/clocksource/timer-integrator-ap.c
new file mode 100644
index 0000000000..a4c700b11d
--- /dev/null
+++ b/drivers/clocksource/timer-integrator-ap.c
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Integrator/AP timer driver
+ * Copyright (C) 2000-2003 Deep Blue Solutions Ltd
+ * Copyright (c) 2014, Linaro Limited
+ */
+
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/sched_clock.h>
+
+#include "timer-sp.h"
+
+static void __iomem * sched_clk_base;
+
+static u64 notrace integrator_read_sched_clock(void)
+{
+ return -readl(sched_clk_base + TIMER_VALUE);
+}
+
+static int __init integrator_clocksource_init(unsigned long inrate,
+ void __iomem *base)
+{
+ u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
+ unsigned long rate = inrate;
+ int ret;
+
+ if (rate >= 1500000) {
+ rate /= 16;
+ ctrl |= TIMER_CTRL_DIV16;
+ }
+
+ writel(0xffff, base + TIMER_LOAD);
+ writel(ctrl, base + TIMER_CTRL);
+
+ ret = clocksource_mmio_init(base + TIMER_VALUE, "timer2",
+ rate, 200, 16, clocksource_mmio_readl_down);
+ if (ret)
+ return ret;
+
+ sched_clk_base = base;
+ sched_clock_register(integrator_read_sched_clock, 16, rate);
+
+ return 0;
+}
+
+static unsigned long timer_reload;
+static void __iomem * clkevt_base;
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ /* clear the interrupt */
+ writel(1, clkevt_base + TIMER_INTCLR);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static int clkevt_shutdown(struct clock_event_device *evt)
+{
+ u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
+
+ /* Disable timer */
+ writel(ctrl, clkevt_base + TIMER_CTRL);
+ return 0;
+}
+
+static int clkevt_set_oneshot(struct clock_event_device *evt)
+{
+ u32 ctrl = readl(clkevt_base + TIMER_CTRL) &
+ ~(TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC);
+
+ /* Leave the timer disabled, .set_next_event will enable it */
+ writel(ctrl, clkevt_base + TIMER_CTRL);
+ return 0;
+}
+
+static int clkevt_set_periodic(struct clock_event_device *evt)
+{
+ u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
+
+ /* Disable timer */
+ writel(ctrl, clkevt_base + TIMER_CTRL);
+
+ /* Enable the timer and start the periodic tick */
+ writel(timer_reload, clkevt_base + TIMER_LOAD);
+ ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
+ writel(ctrl, clkevt_base + TIMER_CTRL);
+ return 0;
+}
+
+static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt)
+{
+ unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
+
+ writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
+ writel(next, clkevt_base + TIMER_LOAD);
+ writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
+
+ return 0;
+}
+
+static struct clock_event_device integrator_clockevent = {
+ .name = "timer1",
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_shutdown = clkevt_shutdown,
+ .set_state_periodic = clkevt_set_periodic,
+ .set_state_oneshot = clkevt_set_oneshot,
+ .tick_resume = clkevt_shutdown,
+ .set_next_event = clkevt_set_next_event,
+ .rating = 300,
+};
+
+static int integrator_clockevent_init(unsigned long inrate,
+ void __iomem *base, int irq)
+{
+ unsigned long rate = inrate;
+ unsigned int ctrl = 0;
+ int ret;
+
+ clkevt_base = base;
+ /* Calculate and program a divisor */
+ if (rate > 0x100000 * HZ) {
+ rate /= 256;
+ ctrl |= TIMER_CTRL_DIV256;
+ } else if (rate > 0x10000 * HZ) {
+ rate /= 16;
+ ctrl |= TIMER_CTRL_DIV16;
+ }
+ timer_reload = rate / HZ;
+ writel(ctrl, clkevt_base + TIMER_CTRL);
+
+ ret = request_irq(irq, integrator_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "timer",
+ &integrator_clockevent);
+ if (ret)
+ return ret;
+
+ clockevents_config_and_register(&integrator_clockevent,
+ rate,
+ 1,
+ 0xffffU);
+ return 0;
+}
+
+static int __init integrator_ap_timer_init_of(struct device_node *node)
+{
+ const char *path;
+ void __iomem *base;
+ int err;
+ int irq;
+ struct clk *clk;
+ unsigned long rate;
+ struct device_node *alias_node;
+
+ base = of_io_request_and_map(node, 0, "integrator-timer");
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("No clock for %pOFn\n", node);
+ return PTR_ERR(clk);
+ }
+ clk_prepare_enable(clk);
+ rate = clk_get_rate(clk);
+ writel(0, base + TIMER_CTRL);
+
+ err = of_property_read_string(of_aliases,
+ "arm,timer-primary", &path);
+ if (err) {
+ pr_warn("Failed to read property\n");
+ return err;
+ }
+
+ alias_node = of_find_node_by_path(path);
+
+ /*
+ * The pointer is used as an identifier not as a pointer, we
+ * can drop the refcount on the of__node immediately after
+ * getting it.
+ */
+ of_node_put(alias_node);
+
+ if (node == alias_node)
+ /* The primary timer lacks IRQ, use as clocksource */
+ return integrator_clocksource_init(rate, base);
+
+ err = of_property_read_string(of_aliases,
+ "arm,timer-secondary", &path);
+ if (err) {
+ pr_warn("Failed to read property\n");
+ return err;
+ }
+
+ alias_node = of_find_node_by_path(path);
+
+ of_node_put(alias_node);
+
+ if (node == alias_node) {
+ /* The secondary timer will drive the clock event */
+ irq = irq_of_parse_and_map(node, 0);
+ return integrator_clockevent_init(rate, base, irq);
+ }
+
+ pr_info("Timer @%p unused\n", base);
+ clk_disable_unprepare(clk);
+
+ return 0;
+}
+
+TIMER_OF_DECLARE(integrator_ap_timer, "arm,integrator-timer",
+ integrator_ap_timer_init_of);
diff --git a/drivers/clocksource/timer-ixp4xx.c b/drivers/clocksource/timer-ixp4xx.c
new file mode 100644
index 0000000000..720ed70a29
--- /dev/null
+++ b/drivers/clocksource/timer-ixp4xx.c
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * IXP4 timer driver
+ * Copyright (C) 2019 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Based on arch/arm/mach-ixp4xx/common.c
+ * Copyright 2002 (C) Intel Corporation
+ * Copyright 2003-2004 (C) MontaVista, Software, Inc.
+ * Copyright (C) Deepak Saxena <dsaxena@plexity.net>
+ */
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+
+/*
+ * Constants to make it easy to access Timer Control/Status registers
+ */
+#define IXP4XX_OSTS_OFFSET 0x00 /* Continuous Timestamp */
+#define IXP4XX_OST1_OFFSET 0x04 /* Timer 1 Timestamp */
+#define IXP4XX_OSRT1_OFFSET 0x08 /* Timer 1 Reload */
+#define IXP4XX_OST2_OFFSET 0x0C /* Timer 2 Timestamp */
+#define IXP4XX_OSRT2_OFFSET 0x10 /* Timer 2 Reload */
+#define IXP4XX_OSST_OFFSET 0x20 /* Timer Status */
+
+/*
+ * Timer register values and bit definitions
+ */
+#define IXP4XX_OST_ENABLE 0x00000001
+#define IXP4XX_OST_ONE_SHOT 0x00000002
+/* Low order bits of reload value ignored */
+#define IXP4XX_OST_RELOAD_MASK 0x00000003
+#define IXP4XX_OST_DISABLED 0x00000000
+#define IXP4XX_OSST_TIMER_1_PEND 0x00000001
+#define IXP4XX_OSST_TIMER_2_PEND 0x00000002
+#define IXP4XX_OSST_TIMER_TS_PEND 0x00000004
+/* Remaining registers are for the watchdog and defined in the watchdog driver */
+
+struct ixp4xx_timer {
+ void __iomem *base;
+ u32 latch;
+ struct clock_event_device clkevt;
+#ifdef CONFIG_ARM
+ struct delay_timer delay_timer;
+#endif
+};
+
+/*
+ * A local singleton used by sched_clock and delay timer reads, which are
+ * fast and stateless
+ */
+static struct ixp4xx_timer *local_ixp4xx_timer;
+
+static inline struct ixp4xx_timer *
+to_ixp4xx_timer(struct clock_event_device *evt)
+{
+ return container_of(evt, struct ixp4xx_timer, clkevt);
+}
+
+static unsigned long ixp4xx_read_timer(void)
+{
+ return __raw_readl(local_ixp4xx_timer->base + IXP4XX_OSTS_OFFSET);
+}
+
+static u64 notrace ixp4xx_read_sched_clock(void)
+{
+ return ixp4xx_read_timer();
+}
+
+static u64 ixp4xx_clocksource_read(struct clocksource *c)
+{
+ return ixp4xx_read_timer();
+}
+
+static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id)
+{
+ struct ixp4xx_timer *tmr = dev_id;
+ struct clock_event_device *evt = &tmr->clkevt;
+
+ /* Clear Pending Interrupt */
+ __raw_writel(IXP4XX_OSST_TIMER_1_PEND,
+ tmr->base + IXP4XX_OSST_OFFSET);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static int ixp4xx_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ struct ixp4xx_timer *tmr = to_ixp4xx_timer(evt);
+ u32 val;
+
+ val = __raw_readl(tmr->base + IXP4XX_OSRT1_OFFSET);
+ /* Keep enable/oneshot bits */
+ val &= IXP4XX_OST_RELOAD_MASK;
+ __raw_writel((cycles & ~IXP4XX_OST_RELOAD_MASK) | val,
+ tmr->base + IXP4XX_OSRT1_OFFSET);
+
+ return 0;
+}
+
+static int ixp4xx_shutdown(struct clock_event_device *evt)
+{
+ struct ixp4xx_timer *tmr = to_ixp4xx_timer(evt);
+ u32 val;
+
+ val = __raw_readl(tmr->base + IXP4XX_OSRT1_OFFSET);
+ val &= ~IXP4XX_OST_ENABLE;
+ __raw_writel(val, tmr->base + IXP4XX_OSRT1_OFFSET);
+
+ return 0;
+}
+
+static int ixp4xx_set_oneshot(struct clock_event_device *evt)
+{
+ struct ixp4xx_timer *tmr = to_ixp4xx_timer(evt);
+
+ __raw_writel(IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT,
+ tmr->base + IXP4XX_OSRT1_OFFSET);
+
+ return 0;
+}
+
+static int ixp4xx_set_periodic(struct clock_event_device *evt)
+{
+ struct ixp4xx_timer *tmr = to_ixp4xx_timer(evt);
+ u32 val;
+
+ val = tmr->latch & ~IXP4XX_OST_RELOAD_MASK;
+ val |= IXP4XX_OST_ENABLE;
+ __raw_writel(val, tmr->base + IXP4XX_OSRT1_OFFSET);
+
+ return 0;
+}
+
+static int ixp4xx_resume(struct clock_event_device *evt)
+{
+ struct ixp4xx_timer *tmr = to_ixp4xx_timer(evt);
+ u32 val;
+
+ val = __raw_readl(tmr->base + IXP4XX_OSRT1_OFFSET);
+ val |= IXP4XX_OST_ENABLE;
+ __raw_writel(val, tmr->base + IXP4XX_OSRT1_OFFSET);
+
+ return 0;
+}
+
+/*
+ * IXP4xx timer tick
+ * We use OS timer1 on the CPU for the timer tick and the timestamp
+ * counter as a source of real clock ticks to account for missed jiffies.
+ */
+static __init int ixp4xx_timer_register(void __iomem *base,
+ int timer_irq,
+ unsigned int timer_freq)
+{
+ struct ixp4xx_timer *tmr;
+ int ret;
+
+ tmr = kzalloc(sizeof(*tmr), GFP_KERNEL);
+ if (!tmr)
+ return -ENOMEM;
+ tmr->base = base;
+
+ /*
+ * The timer register doesn't allow to specify the two least
+ * significant bits of the timeout value and assumes them being zero.
+ * So make sure the latch is the best value with the two least
+ * significant bits unset.
+ */
+ tmr->latch = DIV_ROUND_CLOSEST(timer_freq,
+ (IXP4XX_OST_RELOAD_MASK + 1) * HZ)
+ * (IXP4XX_OST_RELOAD_MASK + 1);
+
+ local_ixp4xx_timer = tmr;
+
+ /* Reset/disable counter */
+ __raw_writel(0, tmr->base + IXP4XX_OSRT1_OFFSET);
+
+ /* Clear any pending interrupt on timer 1 */
+ __raw_writel(IXP4XX_OSST_TIMER_1_PEND,
+ tmr->base + IXP4XX_OSST_OFFSET);
+
+ /* Reset time-stamp counter */
+ __raw_writel(0, tmr->base + IXP4XX_OSTS_OFFSET);
+
+ clocksource_mmio_init(NULL, "OSTS", timer_freq, 200, 32,
+ ixp4xx_clocksource_read);
+
+ tmr->clkevt.name = "ixp4xx timer1";
+ tmr->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ tmr->clkevt.rating = 200;
+ tmr->clkevt.set_state_shutdown = ixp4xx_shutdown;
+ tmr->clkevt.set_state_periodic = ixp4xx_set_periodic;
+ tmr->clkevt.set_state_oneshot = ixp4xx_set_oneshot;
+ tmr->clkevt.tick_resume = ixp4xx_resume;
+ tmr->clkevt.set_next_event = ixp4xx_set_next_event;
+ tmr->clkevt.cpumask = cpumask_of(0);
+ tmr->clkevt.irq = timer_irq;
+ ret = request_irq(timer_irq, ixp4xx_timer_interrupt,
+ IRQF_TIMER, "IXP4XX-TIMER1", tmr);
+ if (ret) {
+ pr_crit("no timer IRQ\n");
+ return -ENODEV;
+ }
+ clockevents_config_and_register(&tmr->clkevt, timer_freq,
+ 0xf, 0xfffffffe);
+
+ sched_clock_register(ixp4xx_read_sched_clock, 32, timer_freq);
+
+#ifdef CONFIG_ARM
+ /* Also use this timer for delays */
+ tmr->delay_timer.read_current_timer = ixp4xx_read_timer;
+ tmr->delay_timer.freq = timer_freq;
+ register_current_timer_delay(&tmr->delay_timer);
+#endif
+
+ return 0;
+}
+
+static struct platform_device ixp4xx_watchdog_device = {
+ .name = "ixp4xx-watchdog",
+ .id = -1,
+};
+
+/*
+ * This probe gets called after the timer is already up and running. The main
+ * function on this platform is to spawn the watchdog device as a child.
+ */
+static int ixp4xx_timer_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ /* Pass the base address as platform data and nothing else */
+ ixp4xx_watchdog_device.dev.platform_data = local_ixp4xx_timer->base;
+ ixp4xx_watchdog_device.dev.parent = dev;
+ return platform_device_register(&ixp4xx_watchdog_device);
+}
+
+static const struct of_device_id ixp4xx_timer_dt_id[] = {
+ { .compatible = "intel,ixp4xx-timer", },
+ { /* sentinel */ },
+};
+
+static struct platform_driver ixp4xx_timer_driver = {
+ .probe = ixp4xx_timer_probe,
+ .driver = {
+ .name = "ixp4xx-timer",
+ .of_match_table = ixp4xx_timer_dt_id,
+ .suppress_bind_attrs = true,
+ },
+};
+builtin_platform_driver(ixp4xx_timer_driver);
+
+static __init int ixp4xx_of_timer_init(struct device_node *np)
+{
+ void __iomem *base;
+ int irq;
+ int ret;
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ pr_crit("IXP4xx: can't remap timer\n");
+ return -ENODEV;
+ }
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq <= 0) {
+ pr_err("Can't parse IRQ\n");
+ ret = -EINVAL;
+ goto out_unmap;
+ }
+
+ /* TODO: get some fixed clocks into the device tree */
+ ret = ixp4xx_timer_register(base, irq, 66666000);
+ if (ret)
+ goto out_unmap;
+ return 0;
+
+out_unmap:
+ iounmap(base);
+ return ret;
+}
+TIMER_OF_DECLARE(ixp4xx, "intel,ixp4xx-timer", ixp4xx_of_timer_init);
diff --git a/drivers/clocksource/timer-keystone.c b/drivers/clocksource/timer-keystone.c
new file mode 100644
index 0000000000..fea8a4f856
--- /dev/null
+++ b/drivers/clocksource/timer-keystone.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Keystone broadcast clock-event
+ *
+ * Copyright 2013 Texas Instruments, Inc.
+ *
+ * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define TIMER_NAME "timer-keystone"
+
+/* Timer register offsets */
+#define TIM12 0x10
+#define TIM34 0x14
+#define PRD12 0x18
+#define PRD34 0x1c
+#define TCR 0x20
+#define TGCR 0x24
+#define INTCTLSTAT 0x44
+
+/* Timer register bitfields */
+#define TCR_ENAMODE_MASK 0xC0
+#define TCR_ENAMODE_ONESHOT_MASK 0x40
+#define TCR_ENAMODE_PERIODIC_MASK 0x80
+
+#define TGCR_TIM_UNRESET_MASK 0x03
+#define INTCTLSTAT_ENINT_MASK 0x01
+
+/**
+ * struct keystone_timer: holds timer's data
+ * @base: timer memory base address
+ * @hz_period: cycles per HZ period
+ * @event_dev: event device based on timer
+ */
+static struct keystone_timer {
+ void __iomem *base;
+ unsigned long hz_period;
+ struct clock_event_device event_dev;
+} timer;
+
+static inline u32 keystone_timer_readl(unsigned long rg)
+{
+ return readl_relaxed(timer.base + rg);
+}
+
+static inline void keystone_timer_writel(u32 val, unsigned long rg)
+{
+ writel_relaxed(val, timer.base + rg);
+}
+
+/**
+ * keystone_timer_barrier: write memory barrier
+ * use explicit barrier to avoid using readl/writel non relaxed function
+ * variants, because in our case non relaxed variants hide the true places
+ * where barrier is needed.
+ */
+static inline void keystone_timer_barrier(void)
+{
+ __iowmb();
+}
+
+/**
+ * keystone_timer_config: configures timer to work in oneshot/periodic modes.
+ * @ mask: mask of the mode to configure
+ * @ period: cycles number to configure for
+ */
+static int keystone_timer_config(u64 period, int mask)
+{
+ u32 tcr;
+ u32 off;
+
+ tcr = keystone_timer_readl(TCR);
+ off = tcr & ~(TCR_ENAMODE_MASK);
+
+ /* set enable mode */
+ tcr |= mask;
+
+ /* disable timer */
+ keystone_timer_writel(off, TCR);
+ /* here we have to be sure the timer has been disabled */
+ keystone_timer_barrier();
+
+ /* reset counter to zero, set new period */
+ keystone_timer_writel(0, TIM12);
+ keystone_timer_writel(0, TIM34);
+ keystone_timer_writel(period & 0xffffffff, PRD12);
+ keystone_timer_writel(period >> 32, PRD34);
+
+ /*
+ * enable timer
+ * here we have to be sure that CNTLO, CNTHI, PRDLO, PRDHI registers
+ * have been written.
+ */
+ keystone_timer_barrier();
+ keystone_timer_writel(tcr, TCR);
+ return 0;
+}
+
+static void keystone_timer_disable(void)
+{
+ u32 tcr;
+
+ tcr = keystone_timer_readl(TCR);
+
+ /* disable timer */
+ tcr &= ~(TCR_ENAMODE_MASK);
+ keystone_timer_writel(tcr, TCR);
+}
+
+static irqreturn_t keystone_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static int keystone_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ return keystone_timer_config(cycles, TCR_ENAMODE_ONESHOT_MASK);
+}
+
+static int keystone_shutdown(struct clock_event_device *evt)
+{
+ keystone_timer_disable();
+ return 0;
+}
+
+static int keystone_set_periodic(struct clock_event_device *evt)
+{
+ keystone_timer_config(timer.hz_period, TCR_ENAMODE_PERIODIC_MASK);
+ return 0;
+}
+
+static int __init keystone_timer_init(struct device_node *np)
+{
+ struct clock_event_device *event_dev = &timer.event_dev;
+ unsigned long rate;
+ struct clk *clk;
+ int irq, error;
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq) {
+ pr_err("%s: failed to map interrupts\n", __func__);
+ return -EINVAL;
+ }
+
+ timer.base = of_iomap(np, 0);
+ if (!timer.base) {
+ pr_err("%s: failed to map registers\n", __func__);
+ return -ENXIO;
+ }
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to get clock\n", __func__);
+ iounmap(timer.base);
+ return PTR_ERR(clk);
+ }
+
+ error = clk_prepare_enable(clk);
+ if (error) {
+ pr_err("%s: failed to enable clock\n", __func__);
+ goto err;
+ }
+
+ rate = clk_get_rate(clk);
+
+ /* disable, use internal clock source */
+ keystone_timer_writel(0, TCR);
+ /* here we have to be sure the timer has been disabled */
+ keystone_timer_barrier();
+
+ /* reset timer as 64-bit, no pre-scaler, plus features are disabled */
+ keystone_timer_writel(0, TGCR);
+
+ /* unreset timer */
+ keystone_timer_writel(TGCR_TIM_UNRESET_MASK, TGCR);
+
+ /* init counter to zero */
+ keystone_timer_writel(0, TIM12);
+ keystone_timer_writel(0, TIM34);
+
+ timer.hz_period = DIV_ROUND_UP(rate, HZ);
+
+ /* enable timer interrupts */
+ keystone_timer_writel(INTCTLSTAT_ENINT_MASK, INTCTLSTAT);
+
+ error = request_irq(irq, keystone_timer_interrupt, IRQF_TIMER,
+ TIMER_NAME, event_dev);
+ if (error) {
+ pr_err("%s: failed to setup irq\n", __func__);
+ goto err;
+ }
+
+ /* setup clockevent */
+ event_dev->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ event_dev->set_next_event = keystone_set_next_event;
+ event_dev->set_state_shutdown = keystone_shutdown;
+ event_dev->set_state_periodic = keystone_set_periodic;
+ event_dev->set_state_oneshot = keystone_shutdown;
+ event_dev->cpumask = cpu_possible_mask;
+ event_dev->owner = THIS_MODULE;
+ event_dev->name = TIMER_NAME;
+ event_dev->irq = irq;
+
+ clockevents_config_and_register(event_dev, rate, 1, ULONG_MAX);
+
+ pr_info("keystone timer clock @%lu Hz\n", rate);
+ return 0;
+err:
+ clk_put(clk);
+ iounmap(timer.base);
+ return error;
+}
+
+TIMER_OF_DECLARE(keystone_timer, "ti,keystone-timer",
+ keystone_timer_init);
diff --git a/drivers/clocksource/timer-loongson1-pwm.c b/drivers/clocksource/timer-loongson1-pwm.c
new file mode 100644
index 0000000000..244d668355
--- /dev/null
+++ b/drivers/clocksource/timer-loongson1-pwm.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Clocksource driver for Loongson-1 SoC
+ *
+ * Copyright (c) 2023 Keguang Zhang <keguang.zhang@gmail.com>
+ */
+
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/sizes.h>
+#include "timer-of.h"
+
+/* Loongson-1 PWM Timer Register Definitions */
+#define PWM_CNTR 0x0
+#define PWM_HRC 0x4
+#define PWM_LRC 0x8
+#define PWM_CTRL 0xc
+
+/* PWM Control Register Bits */
+#define INT_LRC_EN BIT(11)
+#define INT_HRC_EN BIT(10)
+#define CNTR_RST BIT(7)
+#define INT_SR BIT(6)
+#define INT_EN BIT(5)
+#define PWM_SINGLE BIT(4)
+#define PWM_OE BIT(3)
+#define CNT_EN BIT(0)
+
+#define CNTR_WIDTH 24
+
+static DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
+
+struct ls1x_clocksource {
+ void __iomem *reg_base;
+ unsigned long ticks_per_jiffy;
+ struct clocksource clksrc;
+};
+
+static inline struct ls1x_clocksource *to_ls1x_clksrc(struct clocksource *c)
+{
+ return container_of(c, struct ls1x_clocksource, clksrc);
+}
+
+static inline void ls1x_pwmtimer_set_period(unsigned int period,
+ struct timer_of *to)
+{
+ writel(period, timer_of_base(to) + PWM_LRC);
+ writel(period, timer_of_base(to) + PWM_HRC);
+}
+
+static inline void ls1x_pwmtimer_clear(struct timer_of *to)
+{
+ writel(0, timer_of_base(to) + PWM_CNTR);
+}
+
+static inline void ls1x_pwmtimer_start(struct timer_of *to)
+{
+ writel((INT_EN | PWM_OE | CNT_EN), timer_of_base(to) + PWM_CTRL);
+}
+
+static inline void ls1x_pwmtimer_stop(struct timer_of *to)
+{
+ writel(0, timer_of_base(to) + PWM_CTRL);
+}
+
+static inline void ls1x_pwmtimer_irq_ack(struct timer_of *to)
+{
+ int val;
+
+ val = readl(timer_of_base(to) + PWM_CTRL);
+ val |= INT_SR;
+ writel(val, timer_of_base(to) + PWM_CTRL);
+}
+
+static irqreturn_t ls1x_clockevent_isr(int irq, void *dev_id)
+{
+ struct clock_event_device *clkevt = dev_id;
+ struct timer_of *to = to_timer_of(clkevt);
+
+ ls1x_pwmtimer_irq_ack(to);
+ ls1x_pwmtimer_clear(to);
+ ls1x_pwmtimer_start(to);
+
+ clkevt->event_handler(clkevt);
+
+ return IRQ_HANDLED;
+}
+
+static int ls1x_clockevent_set_state_periodic(struct clock_event_device *clkevt)
+{
+ struct timer_of *to = to_timer_of(clkevt);
+
+ raw_spin_lock(&ls1x_timer_lock);
+ ls1x_pwmtimer_set_period(timer_of_period(to), to);
+ ls1x_pwmtimer_clear(to);
+ ls1x_pwmtimer_start(to);
+ raw_spin_unlock(&ls1x_timer_lock);
+
+ return 0;
+}
+
+static int ls1x_clockevent_tick_resume(struct clock_event_device *clkevt)
+{
+ raw_spin_lock(&ls1x_timer_lock);
+ ls1x_pwmtimer_start(to_timer_of(clkevt));
+ raw_spin_unlock(&ls1x_timer_lock);
+
+ return 0;
+}
+
+static int ls1x_clockevent_set_state_shutdown(struct clock_event_device *clkevt)
+{
+ raw_spin_lock(&ls1x_timer_lock);
+ ls1x_pwmtimer_stop(to_timer_of(clkevt));
+ raw_spin_unlock(&ls1x_timer_lock);
+
+ return 0;
+}
+
+static int ls1x_clockevent_set_next(unsigned long evt,
+ struct clock_event_device *clkevt)
+{
+ struct timer_of *to = to_timer_of(clkevt);
+
+ raw_spin_lock(&ls1x_timer_lock);
+ ls1x_pwmtimer_set_period(evt, to);
+ ls1x_pwmtimer_clear(to);
+ ls1x_pwmtimer_start(to);
+ raw_spin_unlock(&ls1x_timer_lock);
+
+ return 0;
+}
+
+static struct timer_of ls1x_to = {
+ .flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
+ .clkevt = {
+ .name = "ls1x-pwmtimer",
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 300,
+ .set_next_event = ls1x_clockevent_set_next,
+ .set_state_periodic = ls1x_clockevent_set_state_periodic,
+ .set_state_oneshot = ls1x_clockevent_set_state_shutdown,
+ .set_state_shutdown = ls1x_clockevent_set_state_shutdown,
+ .tick_resume = ls1x_clockevent_tick_resume,
+ },
+ .of_irq = {
+ .handler = ls1x_clockevent_isr,
+ .flags = IRQF_TIMER,
+ },
+};
+
+/*
+ * Since the PWM timer overflows every two ticks, its not very useful
+ * to just read by itself. So use jiffies to emulate a free
+ * running counter:
+ */
+static u64 ls1x_clocksource_read(struct clocksource *cs)
+{
+ struct ls1x_clocksource *ls1x_cs = to_ls1x_clksrc(cs);
+ unsigned long flags;
+ int count;
+ u32 jifs;
+ static int old_count;
+ static u32 old_jifs;
+
+ raw_spin_lock_irqsave(&ls1x_timer_lock, flags);
+ /*
+ * Although our caller may have the read side of xtime_lock,
+ * this is now a seqlock, and we are cheating in this routine
+ * by having side effects on state that we cannot undo if
+ * there is a collision on the seqlock and our caller has to
+ * retry. (Namely, old_jifs and old_count.) So we must treat
+ * jiffies as volatile despite the lock. We read jiffies
+ * before latching the timer count to guarantee that although
+ * the jiffies value might be older than the count (that is,
+ * the counter may underflow between the last point where
+ * jiffies was incremented and the point where we latch the
+ * count), it cannot be newer.
+ */
+ jifs = jiffies;
+ /* read the count */
+ count = readl(ls1x_cs->reg_base + PWM_CNTR);
+
+ /*
+ * It's possible for count to appear to go the wrong way for this
+ * reason:
+ *
+ * The timer counter underflows, but we haven't handled the resulting
+ * interrupt and incremented jiffies yet.
+ *
+ * Previous attempts to handle these cases intelligently were buggy, so
+ * we just do the simple thing now.
+ */
+ if (count < old_count && jifs == old_jifs)
+ count = old_count;
+
+ old_count = count;
+ old_jifs = jifs;
+
+ raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags);
+
+ return (u64)(jifs * ls1x_cs->ticks_per_jiffy) + count;
+}
+
+static struct ls1x_clocksource ls1x_clocksource = {
+ .clksrc = {
+ .name = "ls1x-pwmtimer",
+ .rating = 300,
+ .read = ls1x_clocksource_read,
+ .mask = CLOCKSOURCE_MASK(CNTR_WIDTH),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ },
+};
+
+static int __init ls1x_pwm_clocksource_init(struct device_node *np)
+{
+ struct timer_of *to = &ls1x_to;
+ int ret;
+
+ ret = timer_of_init(np, to);
+ if (ret)
+ return ret;
+
+ clockevents_config_and_register(&to->clkevt, timer_of_rate(to),
+ 0x1, GENMASK(CNTR_WIDTH - 1, 0));
+
+ ls1x_clocksource.reg_base = timer_of_base(to);
+ ls1x_clocksource.ticks_per_jiffy = timer_of_period(to);
+
+ return clocksource_register_hz(&ls1x_clocksource.clksrc,
+ timer_of_rate(to));
+}
+
+TIMER_OF_DECLARE(ls1x_pwm_clocksource, "loongson,ls1b-pwmtimer",
+ ls1x_pwm_clocksource_init);
diff --git a/drivers/clocksource/timer-lpc32xx.c b/drivers/clocksource/timer-lpc32xx.c
new file mode 100644
index 0000000000..68eae6378b
--- /dev/null
+++ b/drivers/clocksource/timer-lpc32xx.c
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Clocksource driver for NXP LPC32xx/18xx/43xx timer
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on:
+ * time-efm32 Copyright (C) 2013 Pengutronix
+ * mach-lpc32xx/timer.c Copyright (C) 2009 - 2010 NXP Semiconductors
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+#define LPC32XX_TIMER_IR 0x000
+#define LPC32XX_TIMER_IR_MR0INT BIT(0)
+#define LPC32XX_TIMER_TCR 0x004
+#define LPC32XX_TIMER_TCR_CEN BIT(0)
+#define LPC32XX_TIMER_TCR_CRST BIT(1)
+#define LPC32XX_TIMER_TC 0x008
+#define LPC32XX_TIMER_PR 0x00c
+#define LPC32XX_TIMER_MCR 0x014
+#define LPC32XX_TIMER_MCR_MR0I BIT(0)
+#define LPC32XX_TIMER_MCR_MR0R BIT(1)
+#define LPC32XX_TIMER_MCR_MR0S BIT(2)
+#define LPC32XX_TIMER_MR0 0x018
+#define LPC32XX_TIMER_CTCR 0x070
+
+struct lpc32xx_clock_event_ddata {
+ struct clock_event_device evtdev;
+ void __iomem *base;
+ u32 ticks_per_jiffy;
+};
+
+/* Needed for the sched clock */
+static void __iomem *clocksource_timer_counter;
+
+static u64 notrace lpc32xx_read_sched_clock(void)
+{
+ return readl(clocksource_timer_counter);
+}
+
+static unsigned long lpc32xx_delay_timer_read(void)
+{
+ return readl(clocksource_timer_counter);
+}
+
+static struct delay_timer lpc32xx_delay_timer = {
+ .read_current_timer = lpc32xx_delay_timer_read,
+};
+
+static int lpc32xx_clkevt_next_event(unsigned long delta,
+ struct clock_event_device *evtdev)
+{
+ struct lpc32xx_clock_event_ddata *ddata =
+ container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev);
+
+ /*
+ * Place timer in reset and program the delta in the match
+ * channel 0 (MR0). When the timer counter matches the value
+ * in MR0 register the match will trigger an interrupt.
+ * After setup the timer is released from reset and enabled.
+ */
+ writel_relaxed(LPC32XX_TIMER_TCR_CRST, ddata->base + LPC32XX_TIMER_TCR);
+ writel_relaxed(delta, ddata->base + LPC32XX_TIMER_MR0);
+ writel_relaxed(LPC32XX_TIMER_TCR_CEN, ddata->base + LPC32XX_TIMER_TCR);
+
+ return 0;
+}
+
+static int lpc32xx_clkevt_shutdown(struct clock_event_device *evtdev)
+{
+ struct lpc32xx_clock_event_ddata *ddata =
+ container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev);
+
+ /* Disable the timer */
+ writel_relaxed(0, ddata->base + LPC32XX_TIMER_TCR);
+
+ return 0;
+}
+
+static int lpc32xx_clkevt_oneshot(struct clock_event_device *evtdev)
+{
+ struct lpc32xx_clock_event_ddata *ddata =
+ container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev);
+
+ /*
+ * When using oneshot, we must also disable the timer
+ * to wait for the first call to set_next_event().
+ */
+ writel_relaxed(0, ddata->base + LPC32XX_TIMER_TCR);
+
+ /* Enable interrupt, reset on match and stop on match (MCR). */
+ writel_relaxed(LPC32XX_TIMER_MCR_MR0I | LPC32XX_TIMER_MCR_MR0R |
+ LPC32XX_TIMER_MCR_MR0S, ddata->base + LPC32XX_TIMER_MCR);
+ return 0;
+}
+
+static int lpc32xx_clkevt_periodic(struct clock_event_device *evtdev)
+{
+ struct lpc32xx_clock_event_ddata *ddata =
+ container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev);
+
+ /* Enable interrupt and reset on match. */
+ writel_relaxed(LPC32XX_TIMER_MCR_MR0I | LPC32XX_TIMER_MCR_MR0R,
+ ddata->base + LPC32XX_TIMER_MCR);
+
+ /*
+ * Place timer in reset and program the delta in the match
+ * channel 0 (MR0).
+ */
+ writel_relaxed(LPC32XX_TIMER_TCR_CRST, ddata->base + LPC32XX_TIMER_TCR);
+ writel_relaxed(ddata->ticks_per_jiffy, ddata->base + LPC32XX_TIMER_MR0);
+ writel_relaxed(LPC32XX_TIMER_TCR_CEN, ddata->base + LPC32XX_TIMER_TCR);
+
+ return 0;
+}
+
+static irqreturn_t lpc32xx_clock_event_handler(int irq, void *dev_id)
+{
+ struct lpc32xx_clock_event_ddata *ddata = dev_id;
+
+ /* Clear match on channel 0 */
+ writel_relaxed(LPC32XX_TIMER_IR_MR0INT, ddata->base + LPC32XX_TIMER_IR);
+
+ ddata->evtdev.event_handler(&ddata->evtdev);
+
+ return IRQ_HANDLED;
+}
+
+static struct lpc32xx_clock_event_ddata lpc32xx_clk_event_ddata = {
+ .evtdev = {
+ .name = "lpc3220 clockevent",
+ .features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_PERIODIC,
+ .rating = 300,
+ .set_next_event = lpc32xx_clkevt_next_event,
+ .set_state_shutdown = lpc32xx_clkevt_shutdown,
+ .set_state_oneshot = lpc32xx_clkevt_oneshot,
+ .set_state_periodic = lpc32xx_clkevt_periodic,
+ },
+};
+
+static int __init lpc32xx_clocksource_init(struct device_node *np)
+{
+ void __iomem *base;
+ unsigned long rate;
+ struct clk *clk;
+ int ret;
+
+ clk = of_clk_get_by_name(np, "timerclk");
+ if (IS_ERR(clk)) {
+ pr_err("clock get failed (%ld)\n", PTR_ERR(clk));
+ return PTR_ERR(clk);
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("clock enable failed (%d)\n", ret);
+ goto err_clk_enable;
+ }
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ pr_err("unable to map registers\n");
+ ret = -EADDRNOTAVAIL;
+ goto err_iomap;
+ }
+
+ /*
+ * Disable and reset timer then set it to free running timer
+ * mode (CTCR) with no prescaler (PR) or match operations (MCR).
+ * After setup the timer is released from reset and enabled.
+ */
+ writel_relaxed(LPC32XX_TIMER_TCR_CRST, base + LPC32XX_TIMER_TCR);
+ writel_relaxed(0, base + LPC32XX_TIMER_PR);
+ writel_relaxed(0, base + LPC32XX_TIMER_MCR);
+ writel_relaxed(0, base + LPC32XX_TIMER_CTCR);
+ writel_relaxed(LPC32XX_TIMER_TCR_CEN, base + LPC32XX_TIMER_TCR);
+
+ rate = clk_get_rate(clk);
+ ret = clocksource_mmio_init(base + LPC32XX_TIMER_TC, "lpc3220 timer",
+ rate, 300, 32, clocksource_mmio_readl_up);
+ if (ret) {
+ pr_err("failed to init clocksource (%d)\n", ret);
+ goto err_clocksource_init;
+ }
+
+ clocksource_timer_counter = base + LPC32XX_TIMER_TC;
+ lpc32xx_delay_timer.freq = rate;
+ register_current_timer_delay(&lpc32xx_delay_timer);
+ sched_clock_register(lpc32xx_read_sched_clock, 32, rate);
+
+ return 0;
+
+err_clocksource_init:
+ iounmap(base);
+err_iomap:
+ clk_disable_unprepare(clk);
+err_clk_enable:
+ clk_put(clk);
+ return ret;
+}
+
+static int __init lpc32xx_clockevent_init(struct device_node *np)
+{
+ void __iomem *base;
+ unsigned long rate;
+ struct clk *clk;
+ int ret, irq;
+
+ clk = of_clk_get_by_name(np, "timerclk");
+ if (IS_ERR(clk)) {
+ pr_err("clock get failed (%ld)\n", PTR_ERR(clk));
+ return PTR_ERR(clk);
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("clock enable failed (%d)\n", ret);
+ goto err_clk_enable;
+ }
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ pr_err("unable to map registers\n");
+ ret = -EADDRNOTAVAIL;
+ goto err_iomap;
+ }
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq) {
+ pr_err("get irq failed\n");
+ ret = -ENOENT;
+ goto err_irq;
+ }
+
+ /*
+ * Disable timer and clear any pending interrupt (IR) on match
+ * channel 0 (MR0). Clear the prescaler as it's not used.
+ */
+ writel_relaxed(0, base + LPC32XX_TIMER_TCR);
+ writel_relaxed(0, base + LPC32XX_TIMER_PR);
+ writel_relaxed(0, base + LPC32XX_TIMER_CTCR);
+ writel_relaxed(LPC32XX_TIMER_IR_MR0INT, base + LPC32XX_TIMER_IR);
+
+ rate = clk_get_rate(clk);
+ lpc32xx_clk_event_ddata.base = base;
+ lpc32xx_clk_event_ddata.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
+ clockevents_config_and_register(&lpc32xx_clk_event_ddata.evtdev,
+ rate, 1, -1);
+
+ ret = request_irq(irq, lpc32xx_clock_event_handler,
+ IRQF_TIMER | IRQF_IRQPOLL, "lpc3220 clockevent",
+ &lpc32xx_clk_event_ddata);
+ if (ret) {
+ pr_err("request irq failed\n");
+ goto err_irq;
+ }
+
+ return 0;
+
+err_irq:
+ iounmap(base);
+err_iomap:
+ clk_disable_unprepare(clk);
+err_clk_enable:
+ clk_put(clk);
+ return ret;
+}
+
+/*
+ * This function asserts that we have exactly one clocksource and one
+ * clock_event_device in the end.
+ */
+static int __init lpc32xx_timer_init(struct device_node *np)
+{
+ static int has_clocksource, has_clockevent;
+ int ret = 0;
+
+ if (!has_clocksource) {
+ ret = lpc32xx_clocksource_init(np);
+ if (!ret) {
+ has_clocksource = 1;
+ return 0;
+ }
+ }
+
+ if (!has_clockevent) {
+ ret = lpc32xx_clockevent_init(np);
+ if (!ret) {
+ has_clockevent = 1;
+ return 0;
+ }
+ }
+
+ return ret;
+}
+TIMER_OF_DECLARE(lpc32xx_timer, "nxp,lpc3220-timer", lpc32xx_timer_init);
diff --git a/drivers/clocksource/timer-mediatek-cpux.c b/drivers/clocksource/timer-mediatek-cpux.c
new file mode 100644
index 0000000000..a8e3df4c09
--- /dev/null
+++ b/drivers/clocksource/timer-mediatek-cpux.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MediaTek SoCs CPUX General Purpose Timer handling
+ *
+ * Based on timer-mediatek.c:
+ * Copyright (C) 2014 Matthias Brugger <matthias.bgg@gmail.com>
+ *
+ * Copyright (C) 2022 Collabora Ltd.
+ * AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+#include "timer-of.h"
+
+#define TIMER_SYNC_TICKS 3
+
+/* cpux mcusys wrapper */
+#define CPUX_CON_REG 0x0
+#define CPUX_IDX_REG 0x4
+
+/* cpux */
+#define CPUX_IDX_GLOBAL_CTRL 0x0
+ #define CPUX_ENABLE BIT(0)
+ #define CPUX_CLK_DIV_MASK GENMASK(10, 8)
+ #define CPUX_CLK_DIV1 BIT(8)
+ #define CPUX_CLK_DIV2 BIT(9)
+ #define CPUX_CLK_DIV4 BIT(10)
+#define CPUX_IDX_GLOBAL_IRQ 0x30
+
+static u32 mtk_cpux_readl(u32 reg_idx, struct timer_of *to)
+{
+ writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
+ return readl(timer_of_base(to) + CPUX_CON_REG);
+}
+
+static void mtk_cpux_writel(u32 val, u32 reg_idx, struct timer_of *to)
+{
+ writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
+ writel(val, timer_of_base(to) + CPUX_CON_REG);
+}
+
+static void mtk_cpux_set_irq(struct timer_of *to, bool enable)
+{
+ const unsigned long *irq_mask = cpumask_bits(cpu_possible_mask);
+ u32 val;
+
+ val = mtk_cpux_readl(CPUX_IDX_GLOBAL_IRQ, to);
+
+ if (enable)
+ val |= *irq_mask;
+ else
+ val &= ~(*irq_mask);
+
+ mtk_cpux_writel(val, CPUX_IDX_GLOBAL_IRQ, to);
+}
+
+static int mtk_cpux_clkevt_shutdown(struct clock_event_device *clkevt)
+{
+ /* Clear any irq */
+ mtk_cpux_set_irq(to_timer_of(clkevt), false);
+
+ /*
+ * Disabling CPUXGPT timer will crash the platform, especially
+ * if Trusted Firmware is using it (usually, for sleep states),
+ * so we only mask the IRQ and call it a day.
+ */
+ return 0;
+}
+
+static int mtk_cpux_clkevt_resume(struct clock_event_device *clkevt)
+{
+ mtk_cpux_set_irq(to_timer_of(clkevt), true);
+ return 0;
+}
+
+static struct timer_of to = {
+ /*
+ * There are per-cpu interrupts for the CPUX General Purpose Timer
+ * but since this timer feeds the AArch64 System Timer we can rely
+ * on the CPU timer PPIs as well, so we don't declare TIMER_OF_IRQ.
+ */
+ .flags = TIMER_OF_BASE | TIMER_OF_CLOCK,
+
+ .clkevt = {
+ .name = "mtk-cpuxgpt",
+ .cpumask = cpu_possible_mask,
+ .rating = 10,
+ .set_state_shutdown = mtk_cpux_clkevt_shutdown,
+ .tick_resume = mtk_cpux_clkevt_resume,
+ },
+};
+
+static int __init mtk_cpux_init(struct device_node *node)
+{
+ u32 freq, val;
+ int ret;
+
+ /* If this fails, bad things are about to happen... */
+ ret = timer_of_init(node, &to);
+ if (ret) {
+ WARN(1, "Cannot start CPUX timers.\n");
+ return ret;
+ }
+
+ /*
+ * Check if we're given a clock with the right frequency for this
+ * timer, otherwise warn but keep going with the setup anyway, as
+ * that makes it possible to still boot the kernel, even though
+ * it may not work correctly (random lockups, etc).
+ * The reason behind this is that having an early UART may not be
+ * possible for everyone and this gives a chance to retrieve kmsg
+ * for eventual debugging even on consumer devices.
+ */
+ freq = timer_of_rate(&to);
+ if (freq > 13000000)
+ WARN(1, "Requested unsupported timer frequency %u\n", freq);
+
+ /* Clock input is 26MHz, set DIV2 to achieve 13MHz clock */
+ val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to);
+ val &= ~CPUX_CLK_DIV_MASK;
+ val |= CPUX_CLK_DIV2;
+ mtk_cpux_writel(val, CPUX_IDX_GLOBAL_CTRL, &to);
+
+ /* Enable all CPUXGPT timers */
+ val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to);
+ mtk_cpux_writel(val | CPUX_ENABLE, CPUX_IDX_GLOBAL_CTRL, &to);
+
+ clockevents_config_and_register(&to.clkevt, timer_of_rate(&to),
+ TIMER_SYNC_TICKS, 0xffffffff);
+
+ return 0;
+}
+TIMER_OF_DECLARE(mtk_mt6795, "mediatek,mt6795-systimer", mtk_cpux_init);
diff --git a/drivers/clocksource/timer-mediatek.c b/drivers/clocksource/timer-mediatek.c
new file mode 100644
index 0000000000..7bcb4a3f26
--- /dev/null
+++ b/drivers/clocksource/timer-mediatek.c
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Mediatek SoCs General-Purpose Timer handling.
+ *
+ * Copyright (C) 2014 Matthias Brugger
+ *
+ * Matthias Brugger <matthias.bgg@gmail.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+#include "timer-of.h"
+
+#define TIMER_CLK_EVT (1)
+#define TIMER_CLK_SRC (2)
+
+#define TIMER_SYNC_TICKS (3)
+
+/* gpt */
+#define GPT_IRQ_EN_REG 0x00
+#define GPT_IRQ_ENABLE(val) BIT((val) - 1)
+#define GPT_IRQ_ACK_REG 0x08
+#define GPT_IRQ_ACK(val) BIT((val) - 1)
+
+#define GPT_CTRL_REG(val) (0x10 * (val))
+#define GPT_CTRL_OP(val) (((val) & 0x3) << 4)
+#define GPT_CTRL_OP_ONESHOT (0)
+#define GPT_CTRL_OP_REPEAT (1)
+#define GPT_CTRL_OP_FREERUN (3)
+#define GPT_CTRL_CLEAR (2)
+#define GPT_CTRL_ENABLE (1)
+#define GPT_CTRL_DISABLE (0)
+
+#define GPT_CLK_REG(val) (0x04 + (0x10 * (val)))
+#define GPT_CLK_SRC(val) (((val) & 0x1) << 4)
+#define GPT_CLK_SRC_SYS13M (0)
+#define GPT_CLK_SRC_RTC32K (1)
+#define GPT_CLK_DIV1 (0x0)
+#define GPT_CLK_DIV2 (0x1)
+
+#define GPT_CNT_REG(val) (0x08 + (0x10 * (val)))
+#define GPT_CMP_REG(val) (0x0C + (0x10 * (val)))
+
+/* system timer */
+#define SYST_BASE (0x40)
+
+#define SYST_CON (SYST_BASE + 0x0)
+#define SYST_VAL (SYST_BASE + 0x4)
+
+#define SYST_CON_REG(to) (timer_of_base(to) + SYST_CON)
+#define SYST_VAL_REG(to) (timer_of_base(to) + SYST_VAL)
+
+/*
+ * SYST_CON_EN: Clock enable. Shall be set to
+ * - Start timer countdown.
+ * - Allow timeout ticks being updated.
+ * - Allow changing interrupt status,like clear irq pending.
+ *
+ * SYST_CON_IRQ_EN: Set to enable interrupt.
+ *
+ * SYST_CON_IRQ_CLR: Set to clear interrupt.
+ */
+#define SYST_CON_EN BIT(0)
+#define SYST_CON_IRQ_EN BIT(1)
+#define SYST_CON_IRQ_CLR BIT(4)
+
+static void __iomem *gpt_sched_reg __read_mostly;
+
+static void mtk_syst_ack_irq(struct timer_of *to)
+{
+ /* Clear and disable interrupt */
+ writel(SYST_CON_EN, SYST_CON_REG(to));
+ writel(SYST_CON_IRQ_CLR | SYST_CON_EN, SYST_CON_REG(to));
+}
+
+static irqreturn_t mtk_syst_handler(int irq, void *dev_id)
+{
+ struct clock_event_device *clkevt = dev_id;
+ struct timer_of *to = to_timer_of(clkevt);
+
+ mtk_syst_ack_irq(to);
+ clkevt->event_handler(clkevt);
+
+ return IRQ_HANDLED;
+}
+
+static int mtk_syst_clkevt_next_event(unsigned long ticks,
+ struct clock_event_device *clkevt)
+{
+ struct timer_of *to = to_timer_of(clkevt);
+
+ /* Enable clock to allow timeout tick update later */
+ writel(SYST_CON_EN, SYST_CON_REG(to));
+
+ /*
+ * Write new timeout ticks. Timer shall start countdown
+ * after timeout ticks are updated.
+ */
+ writel(ticks, SYST_VAL_REG(to));
+
+ /* Enable interrupt */
+ writel(SYST_CON_EN | SYST_CON_IRQ_EN, SYST_CON_REG(to));
+
+ return 0;
+}
+
+static int mtk_syst_clkevt_shutdown(struct clock_event_device *clkevt)
+{
+ /* Clear any irq */
+ mtk_syst_ack_irq(to_timer_of(clkevt));
+
+ /* Disable timer */
+ writel(0, SYST_CON_REG(to_timer_of(clkevt)));
+
+ return 0;
+}
+
+static int mtk_syst_clkevt_resume(struct clock_event_device *clkevt)
+{
+ return mtk_syst_clkevt_shutdown(clkevt);
+}
+
+static int mtk_syst_clkevt_oneshot(struct clock_event_device *clkevt)
+{
+ return 0;
+}
+
+static u64 notrace mtk_gpt_read_sched_clock(void)
+{
+ return readl_relaxed(gpt_sched_reg);
+}
+
+static void mtk_gpt_clkevt_time_stop(struct timer_of *to, u8 timer)
+{
+ u32 val;
+
+ val = readl(timer_of_base(to) + GPT_CTRL_REG(timer));
+ writel(val & ~GPT_CTRL_ENABLE, timer_of_base(to) +
+ GPT_CTRL_REG(timer));
+}
+
+static void mtk_gpt_clkevt_time_setup(struct timer_of *to,
+ unsigned long delay, u8 timer)
+{
+ writel(delay, timer_of_base(to) + GPT_CMP_REG(timer));
+}
+
+static void mtk_gpt_clkevt_time_start(struct timer_of *to,
+ bool periodic, u8 timer)
+{
+ u32 val;
+
+ /* Acknowledge interrupt */
+ writel(GPT_IRQ_ACK(timer), timer_of_base(to) + GPT_IRQ_ACK_REG);
+
+ val = readl(timer_of_base(to) + GPT_CTRL_REG(timer));
+
+ /* Clear 2 bit timer operation mode field */
+ val &= ~GPT_CTRL_OP(0x3);
+
+ if (periodic)
+ val |= GPT_CTRL_OP(GPT_CTRL_OP_REPEAT);
+ else
+ val |= GPT_CTRL_OP(GPT_CTRL_OP_ONESHOT);
+
+ writel(val | GPT_CTRL_ENABLE | GPT_CTRL_CLEAR,
+ timer_of_base(to) + GPT_CTRL_REG(timer));
+}
+
+static int mtk_gpt_clkevt_shutdown(struct clock_event_device *clk)
+{
+ mtk_gpt_clkevt_time_stop(to_timer_of(clk), TIMER_CLK_EVT);
+
+ return 0;
+}
+
+static int mtk_gpt_clkevt_set_periodic(struct clock_event_device *clk)
+{
+ struct timer_of *to = to_timer_of(clk);
+
+ mtk_gpt_clkevt_time_stop(to, TIMER_CLK_EVT);
+ mtk_gpt_clkevt_time_setup(to, to->of_clk.period, TIMER_CLK_EVT);
+ mtk_gpt_clkevt_time_start(to, true, TIMER_CLK_EVT);
+
+ return 0;
+}
+
+static int mtk_gpt_clkevt_next_event(unsigned long event,
+ struct clock_event_device *clk)
+{
+ struct timer_of *to = to_timer_of(clk);
+
+ mtk_gpt_clkevt_time_stop(to, TIMER_CLK_EVT);
+ mtk_gpt_clkevt_time_setup(to, event, TIMER_CLK_EVT);
+ mtk_gpt_clkevt_time_start(to, false, TIMER_CLK_EVT);
+
+ return 0;
+}
+
+static irqreturn_t mtk_gpt_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *clkevt = (struct clock_event_device *)dev_id;
+ struct timer_of *to = to_timer_of(clkevt);
+
+ /* Acknowledge timer0 irq */
+ writel(GPT_IRQ_ACK(TIMER_CLK_EVT), timer_of_base(to) + GPT_IRQ_ACK_REG);
+ clkevt->event_handler(clkevt);
+
+ return IRQ_HANDLED;
+}
+
+static void
+__init mtk_gpt_setup(struct timer_of *to, u8 timer, u8 option)
+{
+ writel(GPT_CTRL_CLEAR | GPT_CTRL_DISABLE,
+ timer_of_base(to) + GPT_CTRL_REG(timer));
+
+ writel(GPT_CLK_SRC(GPT_CLK_SRC_SYS13M) | GPT_CLK_DIV1,
+ timer_of_base(to) + GPT_CLK_REG(timer));
+
+ writel(0x0, timer_of_base(to) + GPT_CMP_REG(timer));
+
+ writel(GPT_CTRL_OP(option) | GPT_CTRL_ENABLE,
+ timer_of_base(to) + GPT_CTRL_REG(timer));
+}
+
+static void mtk_gpt_enable_irq(struct timer_of *to, u8 timer)
+{
+ u32 val;
+
+ /* Disable all interrupts */
+ writel(0x0, timer_of_base(to) + GPT_IRQ_EN_REG);
+
+ /* Acknowledge all spurious pending interrupts */
+ writel(0x3f, timer_of_base(to) + GPT_IRQ_ACK_REG);
+
+ val = readl(timer_of_base(to) + GPT_IRQ_EN_REG);
+ writel(val | GPT_IRQ_ENABLE(timer),
+ timer_of_base(to) + GPT_IRQ_EN_REG);
+}
+
+static void mtk_gpt_resume(struct clock_event_device *clk)
+{
+ struct timer_of *to = to_timer_of(clk);
+
+ mtk_gpt_enable_irq(to, TIMER_CLK_EVT);
+}
+
+static void mtk_gpt_suspend(struct clock_event_device *clk)
+{
+ struct timer_of *to = to_timer_of(clk);
+
+ /* Disable all interrupts */
+ writel(0x0, timer_of_base(to) + GPT_IRQ_EN_REG);
+
+ /*
+ * This is called with interrupts disabled,
+ * so we need to ack any interrupt that is pending
+ * or for example ATF will prevent a suspend from completing.
+ */
+ writel(0x3f, timer_of_base(to) + GPT_IRQ_ACK_REG);
+}
+
+static struct timer_of to = {
+ .flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
+
+ .clkevt = {
+ .name = "mtk-clkevt",
+ .rating = 300,
+ .cpumask = cpu_possible_mask,
+ },
+
+ .of_irq = {
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ },
+};
+
+static int __init mtk_syst_init(struct device_node *node)
+{
+ int ret;
+
+ to.clkevt.features = CLOCK_EVT_FEAT_DYNIRQ | CLOCK_EVT_FEAT_ONESHOT;
+ to.clkevt.set_state_shutdown = mtk_syst_clkevt_shutdown;
+ to.clkevt.set_state_oneshot = mtk_syst_clkevt_oneshot;
+ to.clkevt.tick_resume = mtk_syst_clkevt_resume;
+ to.clkevt.set_next_event = mtk_syst_clkevt_next_event;
+ to.of_irq.handler = mtk_syst_handler;
+
+ ret = timer_of_init(node, &to);
+ if (ret)
+ return ret;
+
+ clockevents_config_and_register(&to.clkevt, timer_of_rate(&to),
+ TIMER_SYNC_TICKS, 0xffffffff);
+
+ return 0;
+}
+
+static int __init mtk_gpt_init(struct device_node *node)
+{
+ int ret;
+
+ to.clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ to.clkevt.set_state_shutdown = mtk_gpt_clkevt_shutdown;
+ to.clkevt.set_state_periodic = mtk_gpt_clkevt_set_periodic;
+ to.clkevt.set_state_oneshot = mtk_gpt_clkevt_shutdown;
+ to.clkevt.tick_resume = mtk_gpt_clkevt_shutdown;
+ to.clkevt.set_next_event = mtk_gpt_clkevt_next_event;
+ to.clkevt.suspend = mtk_gpt_suspend;
+ to.clkevt.resume = mtk_gpt_resume;
+ to.of_irq.handler = mtk_gpt_interrupt;
+
+ ret = timer_of_init(node, &to);
+ if (ret)
+ return ret;
+
+ /* Configure clock source */
+ mtk_gpt_setup(&to, TIMER_CLK_SRC, GPT_CTRL_OP_FREERUN);
+ clocksource_mmio_init(timer_of_base(&to) + GPT_CNT_REG(TIMER_CLK_SRC),
+ node->name, timer_of_rate(&to), 300, 32,
+ clocksource_mmio_readl_up);
+ gpt_sched_reg = timer_of_base(&to) + GPT_CNT_REG(TIMER_CLK_SRC);
+ sched_clock_register(mtk_gpt_read_sched_clock, 32, timer_of_rate(&to));
+
+ /* Configure clock event */
+ mtk_gpt_setup(&to, TIMER_CLK_EVT, GPT_CTRL_OP_REPEAT);
+ clockevents_config_and_register(&to.clkevt, timer_of_rate(&to),
+ TIMER_SYNC_TICKS, 0xffffffff);
+
+ mtk_gpt_enable_irq(&to, TIMER_CLK_EVT);
+
+ return 0;
+}
+TIMER_OF_DECLARE(mtk_mt6577, "mediatek,mt6577-timer", mtk_gpt_init);
+TIMER_OF_DECLARE(mtk_mt6765, "mediatek,mt6765-timer", mtk_syst_init);
diff --git a/drivers/clocksource/timer-meson6.c b/drivers/clocksource/timer-meson6.c
new file mode 100644
index 0000000000..99f5510a2b
--- /dev/null
+++ b/drivers/clocksource/timer-meson6.c
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Amlogic Meson6 SoCs timer handling.
+ *
+ * Copyright (C) 2014 Carlo Caione <carlo@caione.org>
+ *
+ * Based on code from Amlogic, Inc
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/sched_clock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#ifdef CONFIG_ARM
+#include <linux/delay.h>
+#endif
+
+#define MESON_ISA_TIMER_MUX 0x00
+#define MESON_ISA_TIMER_MUX_TIMERD_EN BIT(19)
+#define MESON_ISA_TIMER_MUX_TIMERC_EN BIT(18)
+#define MESON_ISA_TIMER_MUX_TIMERB_EN BIT(17)
+#define MESON_ISA_TIMER_MUX_TIMERA_EN BIT(16)
+#define MESON_ISA_TIMER_MUX_TIMERD_MODE BIT(15)
+#define MESON_ISA_TIMER_MUX_TIMERC_MODE BIT(14)
+#define MESON_ISA_TIMER_MUX_TIMERB_MODE BIT(13)
+#define MESON_ISA_TIMER_MUX_TIMERA_MODE BIT(12)
+#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_MASK GENMASK(10, 8)
+#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_SYSTEM_CLOCK 0x0
+#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_1US 0x1
+#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_10US 0x2
+#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_100US 0x3
+#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_1MS 0x4
+#define MESON_ISA_TIMER_MUX_TIMERD_INPUT_CLOCK_MASK GENMASK(7, 6)
+#define MESON_ISA_TIMER_MUX_TIMERC_INPUT_CLOCK_MASK GENMASK(5, 4)
+#define MESON_ISA_TIMER_MUX_TIMERB_INPUT_CLOCK_MASK GENMASK(3, 2)
+#define MESON_ISA_TIMER_MUX_TIMERA_INPUT_CLOCK_MASK GENMASK(1, 0)
+#define MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_1US 0x0
+#define MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_10US 0x1
+#define MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_100US 0x0
+#define MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_1MS 0x3
+
+#define MESON_ISA_TIMERA 0x04
+#define MESON_ISA_TIMERB 0x08
+#define MESON_ISA_TIMERC 0x0c
+#define MESON_ISA_TIMERD 0x10
+#define MESON_ISA_TIMERE 0x14
+
+static void __iomem *timer_base;
+
+#ifdef CONFIG_ARM
+static unsigned long meson6_read_current_timer(void)
+{
+ return readl_relaxed(timer_base + MESON_ISA_TIMERE);
+}
+
+static struct delay_timer meson6_delay_timer = {
+ .read_current_timer = meson6_read_current_timer,
+ .freq = 1000 * 1000,
+};
+#endif
+
+static u64 notrace meson6_timer_sched_read(void)
+{
+ return (u64)readl(timer_base + MESON_ISA_TIMERE);
+}
+
+static void meson6_clkevt_time_stop(void)
+{
+ u32 val = readl(timer_base + MESON_ISA_TIMER_MUX);
+
+ writel(val & ~MESON_ISA_TIMER_MUX_TIMERA_EN,
+ timer_base + MESON_ISA_TIMER_MUX);
+}
+
+static void meson6_clkevt_time_setup(unsigned long delay)
+{
+ writel(delay, timer_base + MESON_ISA_TIMERA);
+}
+
+static void meson6_clkevt_time_start(bool periodic)
+{
+ u32 val = readl(timer_base + MESON_ISA_TIMER_MUX);
+
+ if (periodic)
+ val |= MESON_ISA_TIMER_MUX_TIMERA_MODE;
+ else
+ val &= ~MESON_ISA_TIMER_MUX_TIMERA_MODE;
+
+ writel(val | MESON_ISA_TIMER_MUX_TIMERA_EN,
+ timer_base + MESON_ISA_TIMER_MUX);
+}
+
+static int meson6_shutdown(struct clock_event_device *evt)
+{
+ meson6_clkevt_time_stop();
+ return 0;
+}
+
+static int meson6_set_oneshot(struct clock_event_device *evt)
+{
+ meson6_clkevt_time_stop();
+ meson6_clkevt_time_start(false);
+ return 0;
+}
+
+static int meson6_set_periodic(struct clock_event_device *evt)
+{
+ meson6_clkevt_time_stop();
+ meson6_clkevt_time_setup(USEC_PER_SEC / HZ - 1);
+ meson6_clkevt_time_start(true);
+ return 0;
+}
+
+static int meson6_clkevt_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ meson6_clkevt_time_stop();
+ meson6_clkevt_time_setup(evt);
+ meson6_clkevt_time_start(false);
+
+ return 0;
+}
+
+static struct clock_event_device meson6_clockevent = {
+ .name = "meson6_tick",
+ .rating = 400,
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_shutdown = meson6_shutdown,
+ .set_state_periodic = meson6_set_periodic,
+ .set_state_oneshot = meson6_set_oneshot,
+ .tick_resume = meson6_shutdown,
+ .set_next_event = meson6_clkevt_next_event,
+};
+
+static irqreturn_t meson6_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static int __init meson6_timer_init(struct device_node *node)
+{
+ u32 val;
+ int ret, irq;
+
+ timer_base = of_io_request_and_map(node, 0, "meson6-timer");
+ if (IS_ERR(timer_base)) {
+ pr_err("Can't map registers\n");
+ return -ENXIO;
+ }
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq <= 0) {
+ pr_err("Can't parse IRQ\n");
+ return -EINVAL;
+ }
+
+ /* Set 1us for timer E */
+ val = readl(timer_base + MESON_ISA_TIMER_MUX);
+ val &= ~MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_MASK;
+ val |= FIELD_PREP(MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_MASK,
+ MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_1US);
+ writel(val, timer_base + MESON_ISA_TIMER_MUX);
+
+ sched_clock_register(meson6_timer_sched_read, 32, USEC_PER_SEC);
+ clocksource_mmio_init(timer_base + MESON_ISA_TIMERE, node->name,
+ 1000 * 1000, 300, 32, clocksource_mmio_readl_up);
+
+ /* Timer A base 1us */
+ val &= ~MESON_ISA_TIMER_MUX_TIMERA_INPUT_CLOCK_MASK;
+ val |= FIELD_PREP(MESON_ISA_TIMER_MUX_TIMERA_INPUT_CLOCK_MASK,
+ MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_1US);
+ writel(val, timer_base + MESON_ISA_TIMER_MUX);
+
+ /* Stop the timer A */
+ meson6_clkevt_time_stop();
+
+ ret = request_irq(irq, meson6_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "meson6_timer",
+ &meson6_clockevent);
+ if (ret) {
+ pr_warn("failed to setup irq %d\n", irq);
+ return ret;
+ }
+
+ meson6_clockevent.cpumask = cpu_possible_mask;
+ meson6_clockevent.irq = irq;
+
+ clockevents_config_and_register(&meson6_clockevent, USEC_PER_SEC,
+ 1, 0xfffe);
+
+#ifdef CONFIG_ARM
+ /* Also use MESON_ISA_TIMERE for delays */
+ register_current_timer_delay(&meson6_delay_timer);
+#endif
+
+ return 0;
+}
+TIMER_OF_DECLARE(meson6, "amlogic,meson6-timer",
+ meson6_timer_init);
diff --git a/drivers/clocksource/timer-microchip-pit64b.c b/drivers/clocksource/timer-microchip-pit64b.c
new file mode 100644
index 0000000000..57209bb38c
--- /dev/null
+++ b/drivers/clocksource/timer-microchip-pit64b.c
@@ -0,0 +1,508 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * 64-bit Periodic Interval Timer driver
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+#define MCHP_PIT64B_CR 0x00 /* Control Register */
+#define MCHP_PIT64B_CR_START BIT(0)
+#define MCHP_PIT64B_CR_SWRST BIT(8)
+
+#define MCHP_PIT64B_MR 0x04 /* Mode Register */
+#define MCHP_PIT64B_MR_CONT BIT(0)
+#define MCHP_PIT64B_MR_ONE_SHOT (0)
+#define MCHP_PIT64B_MR_SGCLK BIT(3)
+#define MCHP_PIT64B_MR_PRES GENMASK(11, 8)
+
+#define MCHP_PIT64B_LSB_PR 0x08 /* LSB Period Register */
+
+#define MCHP_PIT64B_MSB_PR 0x0C /* MSB Period Register */
+
+#define MCHP_PIT64B_IER 0x10 /* Interrupt Enable Register */
+#define MCHP_PIT64B_IER_PERIOD BIT(0)
+
+#define MCHP_PIT64B_ISR 0x1C /* Interrupt Status Register */
+
+#define MCHP_PIT64B_TLSBR 0x20 /* Timer LSB Register */
+
+#define MCHP_PIT64B_TMSBR 0x24 /* Timer MSB Register */
+
+#define MCHP_PIT64B_PRES_MAX 0x10
+#define MCHP_PIT64B_LSBMASK GENMASK_ULL(31, 0)
+#define MCHP_PIT64B_PRES_TO_MODE(p) (MCHP_PIT64B_MR_PRES & ((p) << 8))
+#define MCHP_PIT64B_MODE_TO_PRES(m) ((MCHP_PIT64B_MR_PRES & (m)) >> 8)
+#define MCHP_PIT64B_DEF_FREQ 5000000UL /* 5 MHz */
+
+#define MCHP_PIT64B_NAME "pit64b"
+
+/**
+ * struct mchp_pit64b_timer - PIT64B timer data structure
+ * @base: base address of PIT64B hardware block
+ * @pclk: PIT64B's peripheral clock
+ * @gclk: PIT64B's generic clock
+ * @mode: precomputed value for mode register
+ */
+struct mchp_pit64b_timer {
+ void __iomem *base;
+ struct clk *pclk;
+ struct clk *gclk;
+ u32 mode;
+};
+
+/**
+ * struct mchp_pit64b_clkevt - PIT64B clockevent data structure
+ * @timer: PIT64B timer
+ * @clkevt: clockevent
+ */
+struct mchp_pit64b_clkevt {
+ struct mchp_pit64b_timer timer;
+ struct clock_event_device clkevt;
+};
+
+#define clkevt_to_mchp_pit64b_timer(x) \
+ ((struct mchp_pit64b_timer *)container_of(x,\
+ struct mchp_pit64b_clkevt, clkevt))
+
+/**
+ * struct mchp_pit64b_clksrc - PIT64B clocksource data structure
+ * @timer: PIT64B timer
+ * @clksrc: clocksource
+ */
+struct mchp_pit64b_clksrc {
+ struct mchp_pit64b_timer timer;
+ struct clocksource clksrc;
+};
+
+#define clksrc_to_mchp_pit64b_timer(x) \
+ ((struct mchp_pit64b_timer *)container_of(x,\
+ struct mchp_pit64b_clksrc, clksrc))
+
+/* Base address for clocksource timer. */
+static void __iomem *mchp_pit64b_cs_base;
+/* Default cycles for clockevent timer. */
+static u64 mchp_pit64b_ce_cycles;
+/* Delay timer. */
+static struct delay_timer mchp_pit64b_dt;
+
+static inline u64 mchp_pit64b_cnt_read(void __iomem *base)
+{
+ unsigned long flags;
+ u32 low, high;
+
+ raw_local_irq_save(flags);
+
+ /*
+ * When using a 64 bit period TLSB must be read first, followed by the
+ * read of TMSB. This sequence generates an atomic read of the 64 bit
+ * timer value whatever the lapse of time between the accesses.
+ */
+ low = readl_relaxed(base + MCHP_PIT64B_TLSBR);
+ high = readl_relaxed(base + MCHP_PIT64B_TMSBR);
+
+ raw_local_irq_restore(flags);
+
+ return (((u64)high << 32) | low);
+}
+
+static inline void mchp_pit64b_reset(struct mchp_pit64b_timer *timer,
+ u64 cycles, u32 mode, u32 irqs)
+{
+ u32 low, high;
+
+ low = cycles & MCHP_PIT64B_LSBMASK;
+ high = cycles >> 32;
+
+ writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
+ writel_relaxed(mode | timer->mode, timer->base + MCHP_PIT64B_MR);
+ writel_relaxed(high, timer->base + MCHP_PIT64B_MSB_PR);
+ writel_relaxed(low, timer->base + MCHP_PIT64B_LSB_PR);
+ writel_relaxed(irqs, timer->base + MCHP_PIT64B_IER);
+ writel_relaxed(MCHP_PIT64B_CR_START, timer->base + MCHP_PIT64B_CR);
+}
+
+static void mchp_pit64b_suspend(struct mchp_pit64b_timer *timer)
+{
+ writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
+ if (timer->mode & MCHP_PIT64B_MR_SGCLK)
+ clk_disable_unprepare(timer->gclk);
+ clk_disable_unprepare(timer->pclk);
+}
+
+static void mchp_pit64b_resume(struct mchp_pit64b_timer *timer)
+{
+ clk_prepare_enable(timer->pclk);
+ if (timer->mode & MCHP_PIT64B_MR_SGCLK)
+ clk_prepare_enable(timer->gclk);
+}
+
+static void mchp_pit64b_clksrc_suspend(struct clocksource *cs)
+{
+ struct mchp_pit64b_timer *timer = clksrc_to_mchp_pit64b_timer(cs);
+
+ mchp_pit64b_suspend(timer);
+}
+
+static void mchp_pit64b_clksrc_resume(struct clocksource *cs)
+{
+ struct mchp_pit64b_timer *timer = clksrc_to_mchp_pit64b_timer(cs);
+
+ mchp_pit64b_resume(timer);
+ mchp_pit64b_reset(timer, ULLONG_MAX, MCHP_PIT64B_MR_CONT, 0);
+}
+
+static u64 mchp_pit64b_clksrc_read(struct clocksource *cs)
+{
+ return mchp_pit64b_cnt_read(mchp_pit64b_cs_base);
+}
+
+static u64 notrace mchp_pit64b_sched_read_clk(void)
+{
+ return mchp_pit64b_cnt_read(mchp_pit64b_cs_base);
+}
+
+static unsigned long notrace mchp_pit64b_dt_read(void)
+{
+ return mchp_pit64b_cnt_read(mchp_pit64b_cs_base);
+}
+
+static int mchp_pit64b_clkevt_shutdown(struct clock_event_device *cedev)
+{
+ struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
+
+ if (!clockevent_state_detached(cedev))
+ mchp_pit64b_suspend(timer);
+
+ return 0;
+}
+
+static int mchp_pit64b_clkevt_set_periodic(struct clock_event_device *cedev)
+{
+ struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
+
+ if (clockevent_state_shutdown(cedev))
+ mchp_pit64b_resume(timer);
+
+ mchp_pit64b_reset(timer, mchp_pit64b_ce_cycles, MCHP_PIT64B_MR_CONT,
+ MCHP_PIT64B_IER_PERIOD);
+
+ return 0;
+}
+
+static int mchp_pit64b_clkevt_set_oneshot(struct clock_event_device *cedev)
+{
+ struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
+
+ if (clockevent_state_shutdown(cedev))
+ mchp_pit64b_resume(timer);
+
+ mchp_pit64b_reset(timer, mchp_pit64b_ce_cycles, MCHP_PIT64B_MR_ONE_SHOT,
+ MCHP_PIT64B_IER_PERIOD);
+
+ return 0;
+}
+
+static int mchp_pit64b_clkevt_set_next_event(unsigned long evt,
+ struct clock_event_device *cedev)
+{
+ struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
+
+ mchp_pit64b_reset(timer, evt, MCHP_PIT64B_MR_ONE_SHOT,
+ MCHP_PIT64B_IER_PERIOD);
+
+ return 0;
+}
+
+static irqreturn_t mchp_pit64b_interrupt(int irq, void *dev_id)
+{
+ struct mchp_pit64b_clkevt *irq_data = dev_id;
+
+ /* Need to clear the interrupt. */
+ readl_relaxed(irq_data->timer.base + MCHP_PIT64B_ISR);
+
+ irq_data->clkevt.event_handler(&irq_data->clkevt);
+
+ return IRQ_HANDLED;
+}
+
+static void __init mchp_pit64b_pres_compute(u32 *pres, u32 clk_rate,
+ u32 max_rate)
+{
+ u32 tmp;
+
+ for (*pres = 0; *pres < MCHP_PIT64B_PRES_MAX; (*pres)++) {
+ tmp = clk_rate / (*pres + 1);
+ if (tmp <= max_rate)
+ break;
+ }
+
+ /* Use the biggest prescaler if we didn't match one. */
+ if (*pres == MCHP_PIT64B_PRES_MAX)
+ *pres = MCHP_PIT64B_PRES_MAX - 1;
+}
+
+/**
+ * mchp_pit64b_init_mode() - prepare PIT64B mode register value to be used at
+ * runtime; this includes prescaler and SGCLK bit
+ * @timer: pointer to pit64b timer to init
+ * @max_rate: maximum rate that timer's clock could use
+ *
+ * PIT64B timer may be fed by gclk or pclk. When gclk is used its rate has to
+ * be at least 3 times lower that pclk's rate. pclk rate is fixed, gclk rate
+ * could be changed via clock APIs. The chosen clock (pclk or gclk) could be
+ * divided by the internal PIT64B's divider.
+ *
+ * This function, first tries to use GCLK by requesting the desired rate from
+ * PMC and then using the internal PIT64B prescaler, if any, to reach the
+ * requested rate. If PCLK/GCLK < 3 (condition requested by PIT64B hardware)
+ * then the function falls back on using PCLK as clock source for PIT64B timer
+ * choosing the highest prescaler in case it doesn't locate one to match the
+ * requested frequency.
+ *
+ * Below is presented the PIT64B block in relation with PMC:
+ *
+ * PIT64B
+ * PMC +------------------------------------+
+ * +----+ | +-----+ |
+ * | |-->gclk -->|-->| | +---------+ +-----+ |
+ * | | | | MUX |--->| Divider |->|timer| |
+ * | |-->pclk -->|-->| | +---------+ +-----+ |
+ * +----+ | +-----+ |
+ * | ^ |
+ * | sel |
+ * +------------------------------------+
+ *
+ * Where:
+ * - gclk rate <= pclk rate/3
+ * - gclk rate could be requested from PMC
+ * - pclk rate is fixed (cannot be requested from PMC)
+ */
+static int __init mchp_pit64b_init_mode(struct mchp_pit64b_timer *timer,
+ unsigned long max_rate)
+{
+ unsigned long pclk_rate, diff = 0, best_diff = ULONG_MAX;
+ long gclk_round = 0;
+ u32 pres, best_pres = 0;
+
+ pclk_rate = clk_get_rate(timer->pclk);
+ if (!pclk_rate)
+ return -EINVAL;
+
+ timer->mode = 0;
+
+ /* Try using GCLK. */
+ gclk_round = clk_round_rate(timer->gclk, max_rate);
+ if (gclk_round < 0)
+ goto pclk;
+
+ if (pclk_rate / gclk_round < 3)
+ goto pclk;
+
+ mchp_pit64b_pres_compute(&pres, gclk_round, max_rate);
+ best_diff = abs(gclk_round / (pres + 1) - max_rate);
+ best_pres = pres;
+
+ if (!best_diff) {
+ timer->mode |= MCHP_PIT64B_MR_SGCLK;
+ clk_set_rate(timer->gclk, gclk_round);
+ goto done;
+ }
+
+pclk:
+ /* Check if requested rate could be obtained using PCLK. */
+ mchp_pit64b_pres_compute(&pres, pclk_rate, max_rate);
+ diff = abs(pclk_rate / (pres + 1) - max_rate);
+
+ if (best_diff > diff) {
+ /* Use PCLK. */
+ best_pres = pres;
+ } else {
+ /* Use GCLK. */
+ timer->mode |= MCHP_PIT64B_MR_SGCLK;
+ clk_set_rate(timer->gclk, gclk_round);
+ }
+
+done:
+ timer->mode |= MCHP_PIT64B_PRES_TO_MODE(best_pres);
+
+ pr_info("PIT64B: using clk=%s with prescaler %u, freq=%lu [Hz]\n",
+ timer->mode & MCHP_PIT64B_MR_SGCLK ? "gclk" : "pclk", best_pres,
+ timer->mode & MCHP_PIT64B_MR_SGCLK ?
+ gclk_round / (best_pres + 1) : pclk_rate / (best_pres + 1));
+
+ return 0;
+}
+
+static int __init mchp_pit64b_init_clksrc(struct mchp_pit64b_timer *timer,
+ u32 clk_rate)
+{
+ struct mchp_pit64b_clksrc *cs;
+ int ret;
+
+ cs = kzalloc(sizeof(*cs), GFP_KERNEL);
+ if (!cs)
+ return -ENOMEM;
+
+ mchp_pit64b_resume(timer);
+ mchp_pit64b_reset(timer, ULLONG_MAX, MCHP_PIT64B_MR_CONT, 0);
+
+ mchp_pit64b_cs_base = timer->base;
+
+ cs->timer.base = timer->base;
+ cs->timer.pclk = timer->pclk;
+ cs->timer.gclk = timer->gclk;
+ cs->timer.mode = timer->mode;
+ cs->clksrc.name = MCHP_PIT64B_NAME;
+ cs->clksrc.mask = CLOCKSOURCE_MASK(64);
+ cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+ cs->clksrc.rating = 210;
+ cs->clksrc.read = mchp_pit64b_clksrc_read;
+ cs->clksrc.suspend = mchp_pit64b_clksrc_suspend;
+ cs->clksrc.resume = mchp_pit64b_clksrc_resume;
+
+ ret = clocksource_register_hz(&cs->clksrc, clk_rate);
+ if (ret) {
+ pr_debug("clksrc: Failed to register PIT64B clocksource!\n");
+
+ /* Stop timer. */
+ mchp_pit64b_suspend(timer);
+ kfree(cs);
+
+ return ret;
+ }
+
+ sched_clock_register(mchp_pit64b_sched_read_clk, 64, clk_rate);
+
+ mchp_pit64b_dt.read_current_timer = mchp_pit64b_dt_read;
+ mchp_pit64b_dt.freq = clk_rate;
+ register_current_timer_delay(&mchp_pit64b_dt);
+
+ return 0;
+}
+
+static int __init mchp_pit64b_init_clkevt(struct mchp_pit64b_timer *timer,
+ u32 clk_rate, u32 irq)
+{
+ struct mchp_pit64b_clkevt *ce;
+ int ret;
+
+ ce = kzalloc(sizeof(*ce), GFP_KERNEL);
+ if (!ce)
+ return -ENOMEM;
+
+ mchp_pit64b_ce_cycles = DIV_ROUND_CLOSEST(clk_rate, HZ);
+
+ ce->timer.base = timer->base;
+ ce->timer.pclk = timer->pclk;
+ ce->timer.gclk = timer->gclk;
+ ce->timer.mode = timer->mode;
+ ce->clkevt.name = MCHP_PIT64B_NAME;
+ ce->clkevt.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC;
+ ce->clkevt.rating = 150;
+ ce->clkevt.set_state_shutdown = mchp_pit64b_clkevt_shutdown;
+ ce->clkevt.set_state_periodic = mchp_pit64b_clkevt_set_periodic;
+ ce->clkevt.set_state_oneshot = mchp_pit64b_clkevt_set_oneshot;
+ ce->clkevt.set_next_event = mchp_pit64b_clkevt_set_next_event;
+ ce->clkevt.cpumask = cpumask_of(0);
+ ce->clkevt.irq = irq;
+
+ ret = request_irq(irq, mchp_pit64b_interrupt, IRQF_TIMER,
+ "pit64b_tick", ce);
+ if (ret) {
+ pr_debug("clkevt: Failed to setup PIT64B IRQ\n");
+ kfree(ce);
+ return ret;
+ }
+
+ clockevents_config_and_register(&ce->clkevt, clk_rate, 1, ULONG_MAX);
+
+ return 0;
+}
+
+static int __init mchp_pit64b_dt_init_timer(struct device_node *node,
+ bool clkevt)
+{
+ struct mchp_pit64b_timer timer;
+ unsigned long clk_rate;
+ u32 irq = 0;
+ int ret;
+
+ /* Parse DT node. */
+ timer.pclk = of_clk_get_by_name(node, "pclk");
+ if (IS_ERR(timer.pclk))
+ return PTR_ERR(timer.pclk);
+
+ timer.gclk = of_clk_get_by_name(node, "gclk");
+ if (IS_ERR(timer.gclk))
+ return PTR_ERR(timer.gclk);
+
+ timer.base = of_iomap(node, 0);
+ if (!timer.base)
+ return -ENXIO;
+
+ if (clkevt) {
+ irq = irq_of_parse_and_map(node, 0);
+ if (!irq) {
+ ret = -ENODEV;
+ goto io_unmap;
+ }
+ }
+
+ /* Initialize mode (prescaler + SGCK bit). To be used at runtime. */
+ ret = mchp_pit64b_init_mode(&timer, MCHP_PIT64B_DEF_FREQ);
+ if (ret)
+ goto irq_unmap;
+
+ if (timer.mode & MCHP_PIT64B_MR_SGCLK)
+ clk_rate = clk_get_rate(timer.gclk);
+ else
+ clk_rate = clk_get_rate(timer.pclk);
+ clk_rate = clk_rate / (MCHP_PIT64B_MODE_TO_PRES(timer.mode) + 1);
+
+ if (clkevt)
+ ret = mchp_pit64b_init_clkevt(&timer, clk_rate, irq);
+ else
+ ret = mchp_pit64b_init_clksrc(&timer, clk_rate);
+
+ if (ret)
+ goto irq_unmap;
+
+ return 0;
+
+irq_unmap:
+ irq_dispose_mapping(irq);
+io_unmap:
+ iounmap(timer.base);
+
+ return ret;
+}
+
+static int __init mchp_pit64b_dt_init(struct device_node *node)
+{
+ static int inits;
+
+ switch (inits++) {
+ case 0:
+ /* 1st request, register clockevent. */
+ return mchp_pit64b_dt_init_timer(node, true);
+ case 1:
+ /* 2nd request, register clocksource. */
+ return mchp_pit64b_dt_init_timer(node, false);
+ }
+
+ /* The rest, don't care. */
+ return -EINVAL;
+}
+
+TIMER_OF_DECLARE(mchp_pit64b, "microchip,sam9x60-pit64b", mchp_pit64b_dt_init);
diff --git a/drivers/clocksource/timer-milbeaut.c b/drivers/clocksource/timer-milbeaut.c
new file mode 100644
index 0000000000..fa9fb4eaca
--- /dev/null
+++ b/drivers/clocksource/timer-milbeaut.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Socionext Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/sched_clock.h>
+#include "timer-of.h"
+
+#define MLB_TMR_TMCSR_OFS 0x0
+#define MLB_TMR_TMR_OFS 0x4
+#define MLB_TMR_TMRLR1_OFS 0x8
+#define MLB_TMR_TMRLR2_OFS 0xc
+#define MLB_TMR_REGSZPCH 0x10
+
+#define MLB_TMR_TMCSR_OUTL BIT(5)
+#define MLB_TMR_TMCSR_RELD BIT(4)
+#define MLB_TMR_TMCSR_INTE BIT(3)
+#define MLB_TMR_TMCSR_UF BIT(2)
+#define MLB_TMR_TMCSR_CNTE BIT(1)
+#define MLB_TMR_TMCSR_TRG BIT(0)
+
+#define MLB_TMR_TMCSR_CSL_DIV2 0
+#define MLB_TMR_DIV_CNT 2
+
+#define MLB_TMR_SRC_CH 1
+#define MLB_TMR_EVT_CH 0
+
+#define MLB_TMR_SRC_CH_OFS (MLB_TMR_REGSZPCH * MLB_TMR_SRC_CH)
+#define MLB_TMR_EVT_CH_OFS (MLB_TMR_REGSZPCH * MLB_TMR_EVT_CH)
+
+#define MLB_TMR_SRC_TMCSR_OFS (MLB_TMR_SRC_CH_OFS + MLB_TMR_TMCSR_OFS)
+#define MLB_TMR_SRC_TMR_OFS (MLB_TMR_SRC_CH_OFS + MLB_TMR_TMR_OFS)
+#define MLB_TMR_SRC_TMRLR1_OFS (MLB_TMR_SRC_CH_OFS + MLB_TMR_TMRLR1_OFS)
+#define MLB_TMR_SRC_TMRLR2_OFS (MLB_TMR_SRC_CH_OFS + MLB_TMR_TMRLR2_OFS)
+
+#define MLB_TMR_EVT_TMCSR_OFS (MLB_TMR_EVT_CH_OFS + MLB_TMR_TMCSR_OFS)
+#define MLB_TMR_EVT_TMR_OFS (MLB_TMR_EVT_CH_OFS + MLB_TMR_TMR_OFS)
+#define MLB_TMR_EVT_TMRLR1_OFS (MLB_TMR_EVT_CH_OFS + MLB_TMR_TMRLR1_OFS)
+#define MLB_TMR_EVT_TMRLR2_OFS (MLB_TMR_EVT_CH_OFS + MLB_TMR_TMRLR2_OFS)
+
+#define MLB_TIMER_RATING 500
+#define MLB_TIMER_ONESHOT 0
+#define MLB_TIMER_PERIODIC 1
+
+static irqreturn_t mlb_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *clk = dev_id;
+ struct timer_of *to = to_timer_of(clk);
+ u32 val;
+
+ val = readl_relaxed(timer_of_base(to) + MLB_TMR_EVT_TMCSR_OFS);
+ val &= ~MLB_TMR_TMCSR_UF;
+ writel_relaxed(val, timer_of_base(to) + MLB_TMR_EVT_TMCSR_OFS);
+
+ clk->event_handler(clk);
+
+ return IRQ_HANDLED;
+}
+
+static void mlb_evt_timer_start(struct timer_of *to, bool periodic)
+{
+ u32 val = MLB_TMR_TMCSR_CSL_DIV2;
+
+ val |= MLB_TMR_TMCSR_CNTE | MLB_TMR_TMCSR_TRG | MLB_TMR_TMCSR_INTE;
+ if (periodic)
+ val |= MLB_TMR_TMCSR_RELD;
+ writel_relaxed(val, timer_of_base(to) + MLB_TMR_EVT_TMCSR_OFS);
+}
+
+static void mlb_evt_timer_stop(struct timer_of *to)
+{
+ u32 val = readl_relaxed(timer_of_base(to) + MLB_TMR_EVT_TMCSR_OFS);
+
+ val &= ~MLB_TMR_TMCSR_CNTE;
+ writel_relaxed(val, timer_of_base(to) + MLB_TMR_EVT_TMCSR_OFS);
+}
+
+static void mlb_evt_timer_register_count(struct timer_of *to, unsigned long cnt)
+{
+ writel_relaxed(cnt, timer_of_base(to) + MLB_TMR_EVT_TMRLR1_OFS);
+}
+
+static int mlb_set_state_periodic(struct clock_event_device *clk)
+{
+ struct timer_of *to = to_timer_of(clk);
+
+ mlb_evt_timer_stop(to);
+ mlb_evt_timer_register_count(to, to->of_clk.period);
+ mlb_evt_timer_start(to, MLB_TIMER_PERIODIC);
+ return 0;
+}
+
+static int mlb_set_state_oneshot(struct clock_event_device *clk)
+{
+ struct timer_of *to = to_timer_of(clk);
+
+ mlb_evt_timer_stop(to);
+ mlb_evt_timer_start(to, MLB_TIMER_ONESHOT);
+ return 0;
+}
+
+static int mlb_set_state_shutdown(struct clock_event_device *clk)
+{
+ struct timer_of *to = to_timer_of(clk);
+
+ mlb_evt_timer_stop(to);
+ return 0;
+}
+
+static int mlb_clkevt_next_event(unsigned long event,
+ struct clock_event_device *clk)
+{
+ struct timer_of *to = to_timer_of(clk);
+
+ mlb_evt_timer_stop(to);
+ mlb_evt_timer_register_count(to, event);
+ mlb_evt_timer_start(to, MLB_TIMER_ONESHOT);
+ return 0;
+}
+
+static int mlb_config_clock_source(struct timer_of *to)
+{
+ u32 val = MLB_TMR_TMCSR_CSL_DIV2;
+
+ writel_relaxed(val, timer_of_base(to) + MLB_TMR_SRC_TMCSR_OFS);
+ writel_relaxed(~0, timer_of_base(to) + MLB_TMR_SRC_TMRLR1_OFS);
+ writel_relaxed(~0, timer_of_base(to) + MLB_TMR_SRC_TMRLR2_OFS);
+ val |= MLB_TMR_TMCSR_RELD | MLB_TMR_TMCSR_CNTE | MLB_TMR_TMCSR_TRG;
+ writel_relaxed(val, timer_of_base(to) + MLB_TMR_SRC_TMCSR_OFS);
+ return 0;
+}
+
+static int mlb_config_clock_event(struct timer_of *to)
+{
+ writel_relaxed(0, timer_of_base(to) + MLB_TMR_EVT_TMCSR_OFS);
+ return 0;
+}
+
+static struct timer_of to = {
+ .flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
+
+ .clkevt = {
+ .name = "mlb-clkevt",
+ .rating = MLB_TIMER_RATING,
+ .cpumask = cpu_possible_mask,
+ .features = CLOCK_EVT_FEAT_DYNIRQ | CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_oneshot = mlb_set_state_oneshot,
+ .set_state_periodic = mlb_set_state_periodic,
+ .set_state_shutdown = mlb_set_state_shutdown,
+ .set_next_event = mlb_clkevt_next_event,
+ },
+
+ .of_irq = {
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = mlb_timer_interrupt,
+ },
+};
+
+static u64 notrace mlb_timer_sched_read(void)
+{
+ return ~readl_relaxed(timer_of_base(&to) + MLB_TMR_SRC_TMR_OFS);
+}
+
+static int __init mlb_timer_init(struct device_node *node)
+{
+ int ret;
+ unsigned long rate;
+
+ ret = timer_of_init(node, &to);
+ if (ret)
+ return ret;
+
+ rate = timer_of_rate(&to) / MLB_TMR_DIV_CNT;
+ mlb_config_clock_source(&to);
+ clocksource_mmio_init(timer_of_base(&to) + MLB_TMR_SRC_TMR_OFS,
+ node->name, rate, MLB_TIMER_RATING, 32,
+ clocksource_mmio_readl_down);
+ sched_clock_register(mlb_timer_sched_read, 32, rate);
+ mlb_config_clock_event(&to);
+ clockevents_config_and_register(&to.clkevt, timer_of_rate(&to), 15,
+ 0xffffffff);
+ return 0;
+}
+TIMER_OF_DECLARE(mlb_peritimer, "socionext,milbeaut-timer",
+ mlb_timer_init);
diff --git a/drivers/clocksource/timer-mp-csky.c b/drivers/clocksource/timer-mp-csky.c
new file mode 100644
index 0000000000..183a995516
--- /dev/null
+++ b/drivers/clocksource/timer-mp-csky.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/sched_clock.h>
+#include <linux/cpu.h>
+#include <linux/of_irq.h>
+#include <asm/reg_ops.h>
+
+#include "timer-of.h"
+
+#define PTIM_CCVR "cr<3, 14>"
+#define PTIM_CTLR "cr<0, 14>"
+#define PTIM_LVR "cr<6, 14>"
+#define PTIM_TSR "cr<1, 14>"
+
+static int csky_mptimer_irq;
+
+static int csky_mptimer_set_next_event(unsigned long delta,
+ struct clock_event_device *ce)
+{
+ mtcr(PTIM_LVR, delta);
+
+ return 0;
+}
+
+static int csky_mptimer_shutdown(struct clock_event_device *ce)
+{
+ mtcr(PTIM_CTLR, 0);
+
+ return 0;
+}
+
+static int csky_mptimer_oneshot(struct clock_event_device *ce)
+{
+ mtcr(PTIM_CTLR, 1);
+
+ return 0;
+}
+
+static int csky_mptimer_oneshot_stopped(struct clock_event_device *ce)
+{
+ mtcr(PTIM_CTLR, 0);
+
+ return 0;
+}
+
+static DEFINE_PER_CPU(struct timer_of, csky_to) = {
+ .flags = TIMER_OF_CLOCK,
+ .clkevt = {
+ .rating = 300,
+ .features = CLOCK_EVT_FEAT_PERCPU |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_shutdown = csky_mptimer_shutdown,
+ .set_state_oneshot = csky_mptimer_oneshot,
+ .set_state_oneshot_stopped = csky_mptimer_oneshot_stopped,
+ .set_next_event = csky_mptimer_set_next_event,
+ },
+};
+
+static irqreturn_t csky_timer_interrupt(int irq, void *dev)
+{
+ struct timer_of *to = this_cpu_ptr(&csky_to);
+
+ mtcr(PTIM_TSR, 0);
+
+ to->clkevt.event_handler(&to->clkevt);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * clock event for percpu
+ */
+static int csky_mptimer_starting_cpu(unsigned int cpu)
+{
+ struct timer_of *to = per_cpu_ptr(&csky_to, cpu);
+
+ to->clkevt.cpumask = cpumask_of(cpu);
+
+ enable_percpu_irq(csky_mptimer_irq, 0);
+
+ clockevents_config_and_register(&to->clkevt, timer_of_rate(to),
+ 2, ULONG_MAX);
+
+ return 0;
+}
+
+static int csky_mptimer_dying_cpu(unsigned int cpu)
+{
+ disable_percpu_irq(csky_mptimer_irq);
+
+ return 0;
+}
+
+/*
+ * clock source
+ */
+static u64 notrace sched_clock_read(void)
+{
+ return (u64)mfcr(PTIM_CCVR);
+}
+
+static u64 clksrc_read(struct clocksource *c)
+{
+ return (u64)mfcr(PTIM_CCVR);
+}
+
+struct clocksource csky_clocksource = {
+ .name = "csky",
+ .rating = 400,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .read = clksrc_read,
+};
+
+static int __init csky_mptimer_init(struct device_node *np)
+{
+ int ret, cpu, cpu_rollback;
+ struct timer_of *to = NULL;
+
+ /*
+ * Csky_mptimer is designed for C-SKY SMP multi-processors and
+ * every core has it's own private irq and regs for clkevt and
+ * clksrc.
+ *
+ * The regs is accessed by cpu instruction: mfcr/mtcr instead of
+ * mmio map style. So we needn't mmio-address in dts, but we still
+ * need to give clk and irq number.
+ *
+ * We use private irq for the mptimer and irq number is the same
+ * for every core. So we use request_percpu_irq() in timer_of_init.
+ */
+ csky_mptimer_irq = irq_of_parse_and_map(np, 0);
+ if (csky_mptimer_irq <= 0)
+ return -EINVAL;
+
+ ret = request_percpu_irq(csky_mptimer_irq, csky_timer_interrupt,
+ "csky_mp_timer", &csky_to);
+ if (ret)
+ return -EINVAL;
+
+ for_each_possible_cpu(cpu) {
+ to = per_cpu_ptr(&csky_to, cpu);
+ ret = timer_of_init(np, to);
+ if (ret)
+ goto rollback;
+ }
+
+ clocksource_register_hz(&csky_clocksource, timer_of_rate(to));
+ sched_clock_register(sched_clock_read, 32, timer_of_rate(to));
+
+ ret = cpuhp_setup_state(CPUHP_AP_CSKY_TIMER_STARTING,
+ "clockevents/csky/timer:starting",
+ csky_mptimer_starting_cpu,
+ csky_mptimer_dying_cpu);
+ if (ret)
+ return -EINVAL;
+
+ return 0;
+
+rollback:
+ for_each_possible_cpu(cpu_rollback) {
+ if (cpu_rollback == cpu)
+ break;
+
+ to = per_cpu_ptr(&csky_to, cpu_rollback);
+ timer_of_cleanup(to);
+ }
+ return -EINVAL;
+}
+TIMER_OF_DECLARE(csky_mptimer, "csky,mptimer", csky_mptimer_init);
diff --git a/drivers/clocksource/timer-msc313e.c b/drivers/clocksource/timer-msc313e.c
new file mode 100644
index 0000000000..54c54ca7c7
--- /dev/null
+++ b/drivers/clocksource/timer-msc313e.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MStar timer driver
+ *
+ * Copyright (C) 2021 Daniel Palmer
+ * Copyright (C) 2021 Romain Perier
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/sched_clock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#ifdef CONFIG_ARM
+#include <linux/delay.h>
+#endif
+
+#include "timer-of.h"
+
+#define TIMER_NAME "msc313e_timer"
+
+#define MSC313E_REG_CTRL 0x00
+#define MSC313E_REG_CTRL_TIMER_EN BIT(0)
+#define MSC313E_REG_CTRL_TIMER_TRIG BIT(1)
+#define MSC313E_REG_CTRL_TIMER_INT_EN BIT(8)
+#define MSC313E_REG_TIMER_MAX_LOW 0x08
+#define MSC313E_REG_TIMER_MAX_HIGH 0x0c
+#define MSC313E_REG_COUNTER_LOW 0x10
+#define MSC313E_REG_COUNTER_HIGH 0x14
+#define MSC313E_REG_TIMER_DIVIDE 0x18
+
+#define MSC313E_CLK_DIVIDER 9
+#define TIMER_SYNC_TICKS 3
+
+#ifdef CONFIG_ARM
+struct msc313e_delay {
+ void __iomem *base;
+ struct delay_timer delay;
+};
+static struct msc313e_delay msc313e_delay;
+#endif
+
+static void __iomem *msc313e_clksrc;
+
+static void msc313e_timer_stop(void __iomem *base)
+{
+ writew(0, base + MSC313E_REG_CTRL);
+}
+
+static void msc313e_timer_start(void __iomem *base, bool periodic)
+{
+ u16 reg;
+
+ reg = readw(base + MSC313E_REG_CTRL);
+ if (periodic)
+ reg |= MSC313E_REG_CTRL_TIMER_EN;
+ else
+ reg |= MSC313E_REG_CTRL_TIMER_TRIG;
+ writew(reg | MSC313E_REG_CTRL_TIMER_INT_EN, base + MSC313E_REG_CTRL);
+}
+
+static void msc313e_timer_setup(void __iomem *base, unsigned long delay)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ writew(delay >> 16, base + MSC313E_REG_TIMER_MAX_HIGH);
+ writew(delay & 0xffff, base + MSC313E_REG_TIMER_MAX_LOW);
+ local_irq_restore(flags);
+}
+
+static unsigned long msc313e_timer_current_value(void __iomem *base)
+{
+ unsigned long flags;
+ u16 l, h;
+
+ local_irq_save(flags);
+ l = readw(base + MSC313E_REG_COUNTER_LOW);
+ h = readw(base + MSC313E_REG_COUNTER_HIGH);
+ local_irq_restore(flags);
+
+ return (((u32)h) << 16 | l);
+}
+
+static int msc313e_timer_clkevt_shutdown(struct clock_event_device *evt)
+{
+ struct timer_of *timer = to_timer_of(evt);
+
+ msc313e_timer_stop(timer_of_base(timer));
+
+ return 0;
+}
+
+static int msc313e_timer_clkevt_set_oneshot(struct clock_event_device *evt)
+{
+ struct timer_of *timer = to_timer_of(evt);
+
+ msc313e_timer_stop(timer_of_base(timer));
+ msc313e_timer_start(timer_of_base(timer), false);
+
+ return 0;
+}
+
+static int msc313e_timer_clkevt_set_periodic(struct clock_event_device *evt)
+{
+ struct timer_of *timer = to_timer_of(evt);
+
+ msc313e_timer_stop(timer_of_base(timer));
+ msc313e_timer_setup(timer_of_base(timer), timer_of_period(timer));
+ msc313e_timer_start(timer_of_base(timer), true);
+
+ return 0;
+}
+
+static int msc313e_timer_clkevt_next_event(unsigned long evt, struct clock_event_device *clkevt)
+{
+ struct timer_of *timer = to_timer_of(clkevt);
+
+ msc313e_timer_stop(timer_of_base(timer));
+ msc313e_timer_setup(timer_of_base(timer), evt);
+ msc313e_timer_start(timer_of_base(timer), false);
+
+ return 0;
+}
+
+static irqreturn_t msc313e_timer_clkevt_irq(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static u64 msc313e_timer_clksrc_read(struct clocksource *cs)
+{
+ return msc313e_timer_current_value(msc313e_clksrc) & cs->mask;
+}
+
+#ifdef CONFIG_ARM
+static unsigned long msc313e_read_delay_timer_read(void)
+{
+ return msc313e_timer_current_value(msc313e_delay.base);
+}
+#endif
+
+static u64 msc313e_timer_sched_clock_read(void)
+{
+ return msc313e_timer_current_value(msc313e_clksrc);
+}
+
+static struct clock_event_device msc313e_clkevt = {
+ .name = TIMER_NAME,
+ .rating = 300,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_shutdown = msc313e_timer_clkevt_shutdown,
+ .set_state_periodic = msc313e_timer_clkevt_set_periodic,
+ .set_state_oneshot = msc313e_timer_clkevt_set_oneshot,
+ .tick_resume = msc313e_timer_clkevt_shutdown,
+ .set_next_event = msc313e_timer_clkevt_next_event,
+};
+
+static int __init msc313e_clkevt_init(struct device_node *np)
+{
+ int ret;
+ struct timer_of *to;
+
+ to = kzalloc(sizeof(*to), GFP_KERNEL);
+ if (!to)
+ return -ENOMEM;
+
+ to->flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE;
+ to->of_irq.handler = msc313e_timer_clkevt_irq;
+ ret = timer_of_init(np, to);
+ if (ret)
+ return ret;
+
+ if (of_device_is_compatible(np, "sstar,ssd20xd-timer")) {
+ to->of_clk.rate = clk_get_rate(to->of_clk.clk) / MSC313E_CLK_DIVIDER;
+ to->of_clk.period = DIV_ROUND_UP(to->of_clk.rate, HZ);
+ writew(MSC313E_CLK_DIVIDER - 1, timer_of_base(to) + MSC313E_REG_TIMER_DIVIDE);
+ }
+
+ msc313e_clkevt.cpumask = cpu_possible_mask;
+ msc313e_clkevt.irq = to->of_irq.irq;
+ to->clkevt = msc313e_clkevt;
+
+ clockevents_config_and_register(&to->clkevt, timer_of_rate(to),
+ TIMER_SYNC_TICKS, 0xffffffff);
+ return 0;
+}
+
+static int __init msc313e_clksrc_init(struct device_node *np)
+{
+ struct timer_of to = { 0 };
+ int ret;
+ u16 reg;
+
+ to.flags = TIMER_OF_BASE | TIMER_OF_CLOCK;
+ ret = timer_of_init(np, &to);
+ if (ret)
+ return ret;
+
+ msc313e_clksrc = timer_of_base(&to);
+ reg = readw(msc313e_clksrc + MSC313E_REG_CTRL);
+ reg |= MSC313E_REG_CTRL_TIMER_EN;
+ writew(reg, msc313e_clksrc + MSC313E_REG_CTRL);
+
+#ifdef CONFIG_ARM
+ msc313e_delay.base = timer_of_base(&to);
+ msc313e_delay.delay.read_current_timer = msc313e_read_delay_timer_read;
+ msc313e_delay.delay.freq = timer_of_rate(&to);
+
+ register_current_timer_delay(&msc313e_delay.delay);
+#endif
+
+ sched_clock_register(msc313e_timer_sched_clock_read, 32, timer_of_rate(&to));
+ return clocksource_mmio_init(timer_of_base(&to), TIMER_NAME, timer_of_rate(&to), 300, 32,
+ msc313e_timer_clksrc_read);
+}
+
+static int __init msc313e_timer_init(struct device_node *np)
+{
+ int ret = 0;
+ static int num_called;
+
+ switch (num_called) {
+ case 0:
+ ret = msc313e_clksrc_init(np);
+ if (ret)
+ return ret;
+ break;
+
+ default:
+ ret = msc313e_clkevt_init(np);
+ if (ret)
+ return ret;
+ break;
+ }
+
+ num_called++;
+
+ return 0;
+}
+
+TIMER_OF_DECLARE(msc313, "mstar,msc313e-timer", msc313e_timer_init);
+TIMER_OF_DECLARE(ssd20xd, "sstar,ssd20xd-timer", msc313e_timer_init);
diff --git a/drivers/clocksource/timer-npcm7xx.c b/drivers/clocksource/timer-npcm7xx.c
new file mode 100644
index 0000000000..9af30af5f9
--- /dev/null
+++ b/drivers/clocksource/timer-npcm7xx.c
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014-2018 Nuvoton Technologies tomer.maimon@nuvoton.com
+ * All rights reserved.
+ *
+ * Copyright 2017 Google, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clockchips.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include "timer-of.h"
+
+/* Timers registers */
+#define NPCM7XX_REG_TCSR0 0x0 /* Timer 0 Control and Status Register */
+#define NPCM7XX_REG_TICR0 0x8 /* Timer 0 Initial Count Register */
+#define NPCM7XX_REG_TCSR1 0x4 /* Timer 1 Control and Status Register */
+#define NPCM7XX_REG_TICR1 0xc /* Timer 1 Initial Count Register */
+#define NPCM7XX_REG_TDR1 0x14 /* Timer 1 Data Register */
+#define NPCM7XX_REG_TISR 0x18 /* Timer Interrupt Status Register */
+
+/* Timers control */
+#define NPCM7XX_Tx_RESETINT 0x1f
+#define NPCM7XX_Tx_PERIOD BIT(27)
+#define NPCM7XX_Tx_INTEN BIT(29)
+#define NPCM7XX_Tx_COUNTEN BIT(30)
+#define NPCM7XX_Tx_ONESHOT 0x0
+#define NPCM7XX_Tx_OPER GENMASK(28, 27)
+#define NPCM7XX_Tx_MIN_PRESCALE 0x1
+#define NPCM7XX_Tx_TDR_MASK_BITS 24
+#define NPCM7XX_Tx_MAX_CNT 0xFFFFFF
+#define NPCM7XX_T0_CLR_INT 0x1
+#define NPCM7XX_Tx_CLR_CSR 0x0
+
+/* Timers operating mode */
+#define NPCM7XX_START_PERIODIC_Tx (NPCM7XX_Tx_PERIOD | NPCM7XX_Tx_COUNTEN | \
+ NPCM7XX_Tx_INTEN | \
+ NPCM7XX_Tx_MIN_PRESCALE)
+
+#define NPCM7XX_START_ONESHOT_Tx (NPCM7XX_Tx_ONESHOT | NPCM7XX_Tx_COUNTEN | \
+ NPCM7XX_Tx_INTEN | \
+ NPCM7XX_Tx_MIN_PRESCALE)
+
+#define NPCM7XX_START_Tx (NPCM7XX_Tx_COUNTEN | NPCM7XX_Tx_PERIOD | \
+ NPCM7XX_Tx_MIN_PRESCALE)
+
+#define NPCM7XX_DEFAULT_CSR (NPCM7XX_Tx_CLR_CSR | NPCM7XX_Tx_MIN_PRESCALE)
+
+static int npcm7xx_timer_resume(struct clock_event_device *evt)
+{
+ struct timer_of *to = to_timer_of(evt);
+ u32 val;
+
+ val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
+ val |= NPCM7XX_Tx_COUNTEN;
+ writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
+
+ return 0;
+}
+
+static int npcm7xx_timer_shutdown(struct clock_event_device *evt)
+{
+ struct timer_of *to = to_timer_of(evt);
+ u32 val;
+
+ val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
+ val &= ~NPCM7XX_Tx_COUNTEN;
+ writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
+
+ return 0;
+}
+
+static int npcm7xx_timer_oneshot(struct clock_event_device *evt)
+{
+ struct timer_of *to = to_timer_of(evt);
+ u32 val;
+
+ val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
+ val &= ~NPCM7XX_Tx_OPER;
+ val |= NPCM7XX_START_ONESHOT_Tx;
+ writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
+
+ return 0;
+}
+
+static int npcm7xx_timer_periodic(struct clock_event_device *evt)
+{
+ struct timer_of *to = to_timer_of(evt);
+ u32 val;
+
+ writel(timer_of_period(to), timer_of_base(to) + NPCM7XX_REG_TICR0);
+
+ val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
+ val &= ~NPCM7XX_Tx_OPER;
+ val |= NPCM7XX_START_PERIODIC_Tx;
+ writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
+
+ return 0;
+}
+
+static int npcm7xx_clockevent_set_next_event(unsigned long evt,
+ struct clock_event_device *clk)
+{
+ struct timer_of *to = to_timer_of(clk);
+ u32 val;
+
+ writel(evt, timer_of_base(to) + NPCM7XX_REG_TICR0);
+ val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
+ val |= NPCM7XX_START_Tx;
+ writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
+
+ return 0;
+}
+
+static irqreturn_t npcm7xx_timer0_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+ struct timer_of *to = to_timer_of(evt);
+
+ writel(NPCM7XX_T0_CLR_INT, timer_of_base(to) + NPCM7XX_REG_TISR);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct timer_of npcm7xx_to = {
+ .flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
+
+ .clkevt = {
+ .name = "npcm7xx-timer0",
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = npcm7xx_clockevent_set_next_event,
+ .set_state_shutdown = npcm7xx_timer_shutdown,
+ .set_state_periodic = npcm7xx_timer_periodic,
+ .set_state_oneshot = npcm7xx_timer_oneshot,
+ .tick_resume = npcm7xx_timer_resume,
+ .rating = 300,
+ },
+
+ .of_irq = {
+ .handler = npcm7xx_timer0_interrupt,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ },
+};
+
+static void __init npcm7xx_clockevents_init(void)
+{
+ writel(NPCM7XX_DEFAULT_CSR,
+ timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR0);
+
+ writel(NPCM7XX_Tx_RESETINT,
+ timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TISR);
+
+ npcm7xx_to.clkevt.cpumask = cpumask_of(0);
+ clockevents_config_and_register(&npcm7xx_to.clkevt,
+ timer_of_rate(&npcm7xx_to),
+ 0x1, NPCM7XX_Tx_MAX_CNT);
+}
+
+static void __init npcm7xx_clocksource_init(void)
+{
+ u32 val;
+
+ writel(NPCM7XX_DEFAULT_CSR,
+ timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR1);
+ writel(NPCM7XX_Tx_MAX_CNT,
+ timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TICR1);
+
+ val = readl(timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR1);
+ val |= NPCM7XX_START_Tx;
+ writel(val, timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR1);
+
+ clocksource_mmio_init(timer_of_base(&npcm7xx_to) +
+ NPCM7XX_REG_TDR1,
+ "npcm7xx-timer1", timer_of_rate(&npcm7xx_to),
+ 200, (unsigned int)NPCM7XX_Tx_TDR_MASK_BITS,
+ clocksource_mmio_readl_down);
+}
+
+static int __init npcm7xx_timer_init(struct device_node *np)
+{
+ struct clk *clk;
+ int ret;
+
+ ret = timer_of_init(np, &npcm7xx_to);
+ if (ret)
+ return ret;
+
+ /* Clock input is divided by PRESCALE + 1 before it is fed */
+ /* to the counter */
+ npcm7xx_to.of_clk.rate = npcm7xx_to.of_clk.rate /
+ (NPCM7XX_Tx_MIN_PRESCALE + 1);
+
+ /* Enable the clock for timer1, if it exists */
+ clk = of_clk_get(np, 1);
+ if (clk) {
+ if (!IS_ERR(clk))
+ clk_prepare_enable(clk);
+ else
+ pr_warn("%pOF: Failed to get clock for timer1: %pe", np, clk);
+ }
+
+ npcm7xx_clocksource_init();
+ npcm7xx_clockevents_init();
+
+ pr_info("Enabling NPCM7xx clocksource timer base: %px, IRQ: %d ",
+ timer_of_base(&npcm7xx_to), timer_of_irq(&npcm7xx_to));
+
+ return 0;
+}
+
+TIMER_OF_DECLARE(wpcm450, "nuvoton,wpcm450-timer", npcm7xx_timer_init);
+TIMER_OF_DECLARE(npcm7xx, "nuvoton,npcm750-timer", npcm7xx_timer_init);
+
diff --git a/drivers/clocksource/timer-of.c b/drivers/clocksource/timer-of.c
new file mode 100644
index 0000000000..c3f54d9912
--- /dev/null
+++ b/drivers/clocksource/timer-of.c
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017, Linaro Ltd. All rights reserved.
+ *
+ * Author: Daniel Lezcano <daniel.lezcano@linaro.org>
+ */
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+
+#include "timer-of.h"
+
+/**
+ * timer_of_irq_exit - Release the interrupt
+ * @of_irq: an of_timer_irq structure pointer
+ *
+ * Free the irq resource
+ */
+static __init void timer_of_irq_exit(struct of_timer_irq *of_irq)
+{
+ struct timer_of *to = container_of(of_irq, struct timer_of, of_irq);
+
+ struct clock_event_device *clkevt = &to->clkevt;
+
+ if (of_irq->percpu)
+ free_percpu_irq(of_irq->irq, clkevt);
+ else
+ free_irq(of_irq->irq, clkevt);
+}
+
+/**
+ * timer_of_irq_init - Request the interrupt
+ * @np: a device tree node pointer
+ * @of_irq: an of_timer_irq structure pointer
+ *
+ * Get the interrupt number from the DT from its definition and
+ * request it. The interrupt is gotten by falling back the following way:
+ *
+ * - Get interrupt number by name
+ * - Get interrupt number by index
+ *
+ * When the interrupt is per CPU, 'request_percpu_irq()' is called,
+ * otherwise 'request_irq()' is used.
+ *
+ * Returns 0 on success, < 0 otherwise
+ */
+static __init int timer_of_irq_init(struct device_node *np,
+ struct of_timer_irq *of_irq)
+{
+ int ret;
+ struct timer_of *to = container_of(of_irq, struct timer_of, of_irq);
+ struct clock_event_device *clkevt = &to->clkevt;
+
+ if (of_irq->name) {
+ of_irq->irq = ret = of_irq_get_byname(np, of_irq->name);
+ if (ret < 0) {
+ pr_err("Failed to get interrupt %s for %pOF\n",
+ of_irq->name, np);
+ return ret;
+ }
+ } else {
+ of_irq->irq = irq_of_parse_and_map(np, of_irq->index);
+ }
+ if (!of_irq->irq) {
+ pr_err("Failed to map interrupt for %pOF\n", np);
+ return -EINVAL;
+ }
+
+ ret = of_irq->percpu ?
+ request_percpu_irq(of_irq->irq, of_irq->handler,
+ np->full_name, clkevt) :
+ request_irq(of_irq->irq, of_irq->handler,
+ of_irq->flags ? of_irq->flags : IRQF_TIMER,
+ np->full_name, clkevt);
+ if (ret) {
+ pr_err("Failed to request irq %d for %pOF\n", of_irq->irq, np);
+ return ret;
+ }
+
+ clkevt->irq = of_irq->irq;
+
+ return 0;
+}
+
+/**
+ * timer_of_clk_exit - Release the clock resources
+ * @of_clk: a of_timer_clk structure pointer
+ *
+ * Disables and releases the refcount on the clk
+ */
+static __init void timer_of_clk_exit(struct of_timer_clk *of_clk)
+{
+ of_clk->rate = 0;
+ clk_disable_unprepare(of_clk->clk);
+ clk_put(of_clk->clk);
+}
+
+/**
+ * timer_of_clk_init - Initialize the clock resources
+ * @np: a device tree node pointer
+ * @of_clk: a of_timer_clk structure pointer
+ *
+ * Get the clock by name or by index, enable it and get the rate
+ *
+ * Returns 0 on success, < 0 otherwise
+ */
+static __init int timer_of_clk_init(struct device_node *np,
+ struct of_timer_clk *of_clk)
+{
+ int ret;
+
+ of_clk->clk = of_clk->name ? of_clk_get_by_name(np, of_clk->name) :
+ of_clk_get(np, of_clk->index);
+ if (IS_ERR(of_clk->clk)) {
+ ret = PTR_ERR(of_clk->clk);
+ if (ret != -EPROBE_DEFER)
+ pr_err("Failed to get clock for %pOF\n", np);
+ goto out;
+ }
+
+ ret = clk_prepare_enable(of_clk->clk);
+ if (ret) {
+ pr_err("Failed for enable clock for %pOF\n", np);
+ goto out_clk_put;
+ }
+
+ of_clk->rate = clk_get_rate(of_clk->clk);
+ if (!of_clk->rate) {
+ ret = -EINVAL;
+ pr_err("Failed to get clock rate for %pOF\n", np);
+ goto out_clk_disable;
+ }
+
+ of_clk->period = DIV_ROUND_UP(of_clk->rate, HZ);
+out:
+ return ret;
+
+out_clk_disable:
+ clk_disable_unprepare(of_clk->clk);
+out_clk_put:
+ clk_put(of_clk->clk);
+
+ goto out;
+}
+
+static __init void timer_of_base_exit(struct of_timer_base *of_base)
+{
+ iounmap(of_base->base);
+}
+
+static __init int timer_of_base_init(struct device_node *np,
+ struct of_timer_base *of_base)
+{
+ of_base->base = of_base->name ?
+ of_io_request_and_map(np, of_base->index, of_base->name) :
+ of_iomap(np, of_base->index);
+ if (IS_ERR_OR_NULL(of_base->base)) {
+ pr_err("Failed to iomap (%s:%s)\n", np->name, of_base->name);
+ return of_base->base ? PTR_ERR(of_base->base) : -ENOMEM;
+ }
+
+ return 0;
+}
+
+int __init timer_of_init(struct device_node *np, struct timer_of *to)
+{
+ int ret = -EINVAL;
+ int flags = 0;
+
+ if (to->flags & TIMER_OF_BASE) {
+ ret = timer_of_base_init(np, &to->of_base);
+ if (ret)
+ goto out_fail;
+ flags |= TIMER_OF_BASE;
+ }
+
+ if (to->flags & TIMER_OF_CLOCK) {
+ ret = timer_of_clk_init(np, &to->of_clk);
+ if (ret)
+ goto out_fail;
+ flags |= TIMER_OF_CLOCK;
+ }
+
+ if (to->flags & TIMER_OF_IRQ) {
+ ret = timer_of_irq_init(np, &to->of_irq);
+ if (ret)
+ goto out_fail;
+ flags |= TIMER_OF_IRQ;
+ }
+
+ if (!to->clkevt.name)
+ to->clkevt.name = np->full_name;
+
+ to->np = np;
+
+ return ret;
+
+out_fail:
+ if (flags & TIMER_OF_IRQ)
+ timer_of_irq_exit(&to->of_irq);
+
+ if (flags & TIMER_OF_CLOCK)
+ timer_of_clk_exit(&to->of_clk);
+
+ if (flags & TIMER_OF_BASE)
+ timer_of_base_exit(&to->of_base);
+ return ret;
+}
+
+/**
+ * timer_of_cleanup - release timer_of resources
+ * @to: timer_of structure
+ *
+ * Release the resources that has been used in timer_of_init().
+ * This function should be called in init error cases
+ */
+void __init timer_of_cleanup(struct timer_of *to)
+{
+ if (to->flags & TIMER_OF_IRQ)
+ timer_of_irq_exit(&to->of_irq);
+
+ if (to->flags & TIMER_OF_CLOCK)
+ timer_of_clk_exit(&to->of_clk);
+
+ if (to->flags & TIMER_OF_BASE)
+ timer_of_base_exit(&to->of_base);
+}
diff --git a/drivers/clocksource/timer-of.h b/drivers/clocksource/timer-of.h
new file mode 100644
index 0000000000..a5478f3e85
--- /dev/null
+++ b/drivers/clocksource/timer-of.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __TIMER_OF_H__
+#define __TIMER_OF_H__
+
+#include <linux/clockchips.h>
+
+#define TIMER_OF_BASE 0x1
+#define TIMER_OF_CLOCK 0x2
+#define TIMER_OF_IRQ 0x4
+
+struct of_timer_irq {
+ int irq;
+ int index;
+ int percpu;
+ const char *name;
+ unsigned long flags;
+ irq_handler_t handler;
+};
+
+struct of_timer_base {
+ void __iomem *base;
+ const char *name;
+ int index;
+};
+
+struct of_timer_clk {
+ struct clk *clk;
+ const char *name;
+ int index;
+ unsigned long rate;
+ unsigned long period;
+};
+
+struct timer_of {
+ unsigned int flags;
+ struct device_node *np;
+ struct clock_event_device clkevt;
+ struct of_timer_base of_base;
+ struct of_timer_irq of_irq;
+ struct of_timer_clk of_clk;
+ void *private_data;
+};
+
+static inline struct timer_of *to_timer_of(struct clock_event_device *clkevt)
+{
+ return container_of(clkevt, struct timer_of, clkevt);
+}
+
+static inline void __iomem *timer_of_base(struct timer_of *to)
+{
+ return to->of_base.base;
+}
+
+static inline int timer_of_irq(struct timer_of *to)
+{
+ return to->of_irq.irq;
+}
+
+static inline unsigned long timer_of_rate(struct timer_of *to)
+{
+ return to->of_clk.rate;
+}
+
+static inline unsigned long timer_of_period(struct timer_of *to)
+{
+ return to->of_clk.period;
+}
+
+extern int __init timer_of_init(struct device_node *np,
+ struct timer_of *to);
+
+extern void __init timer_of_cleanup(struct timer_of *to);
+
+#endif
diff --git a/drivers/clocksource/timer-orion.c b/drivers/clocksource/timer-orion.c
new file mode 100644
index 0000000000..49e86cb70a
--- /dev/null
+++ b/drivers/clocksource/timer-orion.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell Orion SoC timer handling.
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * Timer 0 is used as free-running clocksource, while timer 1 is
+ * used as clock_event_device.
+ */
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/spinlock.h>
+#include <linux/sched_clock.h>
+
+#define TIMER_CTRL 0x00
+#define TIMER0_EN BIT(0)
+#define TIMER0_RELOAD_EN BIT(1)
+#define TIMER1_EN BIT(2)
+#define TIMER1_RELOAD_EN BIT(3)
+#define TIMER0_RELOAD 0x10
+#define TIMER0_VAL 0x14
+#define TIMER1_RELOAD 0x18
+#define TIMER1_VAL 0x1c
+
+#define ORION_ONESHOT_MIN 1
+#define ORION_ONESHOT_MAX 0xfffffffe
+
+static void __iomem *timer_base;
+
+static unsigned long notrace orion_read_timer(void)
+{
+ return ~readl(timer_base + TIMER0_VAL);
+}
+
+static struct delay_timer orion_delay_timer = {
+ .read_current_timer = orion_read_timer,
+};
+
+static void orion_delay_timer_init(unsigned long rate)
+{
+ orion_delay_timer.freq = rate;
+ register_current_timer_delay(&orion_delay_timer);
+}
+
+/*
+ * Free-running clocksource handling.
+ */
+static u64 notrace orion_read_sched_clock(void)
+{
+ return ~readl(timer_base + TIMER0_VAL);
+}
+
+/*
+ * Clockevent handling.
+ */
+static u32 ticks_per_jiffy;
+
+static int orion_clkevt_next_event(unsigned long delta,
+ struct clock_event_device *dev)
+{
+ /* setup and enable one-shot timer */
+ writel(delta, timer_base + TIMER1_VAL);
+ atomic_io_modify(timer_base + TIMER_CTRL,
+ TIMER1_RELOAD_EN | TIMER1_EN, TIMER1_EN);
+
+ return 0;
+}
+
+static int orion_clkevt_shutdown(struct clock_event_device *dev)
+{
+ /* disable timer */
+ atomic_io_modify(timer_base + TIMER_CTRL,
+ TIMER1_RELOAD_EN | TIMER1_EN, 0);
+ return 0;
+}
+
+static int orion_clkevt_set_periodic(struct clock_event_device *dev)
+{
+ /* setup and enable periodic timer at 1/HZ intervals */
+ writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD);
+ writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL);
+ atomic_io_modify(timer_base + TIMER_CTRL,
+ TIMER1_RELOAD_EN | TIMER1_EN,
+ TIMER1_RELOAD_EN | TIMER1_EN);
+ return 0;
+}
+
+static struct clock_event_device orion_clkevt = {
+ .name = "orion_event",
+ .features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_PERIODIC,
+ .shift = 32,
+ .rating = 300,
+ .set_next_event = orion_clkevt_next_event,
+ .set_state_shutdown = orion_clkevt_shutdown,
+ .set_state_periodic = orion_clkevt_set_periodic,
+ .set_state_oneshot = orion_clkevt_shutdown,
+ .tick_resume = orion_clkevt_shutdown,
+};
+
+static irqreturn_t orion_clkevt_irq_handler(int irq, void *dev_id)
+{
+ orion_clkevt.event_handler(&orion_clkevt);
+ return IRQ_HANDLED;
+}
+
+static int __init orion_timer_init(struct device_node *np)
+{
+ unsigned long rate;
+ struct clk *clk;
+ int irq, ret;
+
+ /* timer registers are shared with watchdog timer */
+ timer_base = of_iomap(np, 0);
+ if (!timer_base) {
+ pr_err("%pOFn: unable to map resource\n", np);
+ return -ENXIO;
+ }
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("%pOFn: unable to get clk\n", np);
+ return PTR_ERR(clk);
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("Failed to prepare clock\n");
+ return ret;
+ }
+
+ /* we are only interested in timer1 irq */
+ irq = irq_of_parse_and_map(np, 1);
+ if (irq <= 0) {
+ pr_err("%pOFn: unable to parse timer1 irq\n", np);
+ ret = -EINVAL;
+ goto out_unprep_clk;
+ }
+
+ rate = clk_get_rate(clk);
+
+ /* setup timer0 as free-running clocksource */
+ writel(~0, timer_base + TIMER0_VAL);
+ writel(~0, timer_base + TIMER0_RELOAD);
+ atomic_io_modify(timer_base + TIMER_CTRL,
+ TIMER0_RELOAD_EN | TIMER0_EN,
+ TIMER0_RELOAD_EN | TIMER0_EN);
+
+ ret = clocksource_mmio_init(timer_base + TIMER0_VAL,
+ "orion_clocksource", rate, 300, 32,
+ clocksource_mmio_readl_down);
+ if (ret) {
+ pr_err("Failed to initialize mmio timer\n");
+ goto out_unprep_clk;
+ }
+
+ sched_clock_register(orion_read_sched_clock, 32, rate);
+
+ /* setup timer1 as clockevent timer */
+ ret = request_irq(irq, orion_clkevt_irq_handler, IRQF_TIMER,
+ "orion_event", NULL);
+ if (ret) {
+ pr_err("%pOFn: unable to setup irq\n", np);
+ goto out_unprep_clk;
+ }
+
+ ticks_per_jiffy = (clk_get_rate(clk) + HZ/2) / HZ;
+ orion_clkevt.cpumask = cpumask_of(0);
+ orion_clkevt.irq = irq;
+ clockevents_config_and_register(&orion_clkevt, rate,
+ ORION_ONESHOT_MIN, ORION_ONESHOT_MAX);
+
+
+ orion_delay_timer_init(rate);
+
+ return 0;
+
+out_unprep_clk:
+ clk_disable_unprepare(clk);
+ return ret;
+}
+TIMER_OF_DECLARE(orion_timer, "marvell,orion-timer", orion_timer_init);
diff --git a/drivers/clocksource/timer-owl.c b/drivers/clocksource/timer-owl.c
new file mode 100644
index 0000000000..ac97420bfa
--- /dev/null
+++ b/drivers/clocksource/timer-owl.c
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Actions Semi Owl timer
+ *
+ * Copyright 2012 Actions Semi Inc.
+ * Author: Actions Semi, Inc.
+ *
+ * Copyright (c) 2017 SUSE Linux GmbH
+ * Author: Andreas Färber
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/sched_clock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define OWL_Tx_CTL 0x0
+#define OWL_Tx_CMP 0x4
+#define OWL_Tx_VAL 0x8
+
+#define OWL_Tx_CTL_PD BIT(0)
+#define OWL_Tx_CTL_INTEN BIT(1)
+#define OWL_Tx_CTL_EN BIT(2)
+
+static void __iomem *owl_timer_base;
+static void __iomem *owl_clksrc_base;
+static void __iomem *owl_clkevt_base;
+
+static inline void owl_timer_reset(void __iomem *base)
+{
+ writel(0, base + OWL_Tx_CTL);
+ writel(0, base + OWL_Tx_VAL);
+ writel(0, base + OWL_Tx_CMP);
+}
+
+static inline void owl_timer_set_enabled(void __iomem *base, bool enabled)
+{
+ u32 ctl = readl(base + OWL_Tx_CTL);
+
+ /* PD bit is cleared when set */
+ ctl &= ~OWL_Tx_CTL_PD;
+
+ if (enabled)
+ ctl |= OWL_Tx_CTL_EN;
+ else
+ ctl &= ~OWL_Tx_CTL_EN;
+
+ writel(ctl, base + OWL_Tx_CTL);
+}
+
+static u64 notrace owl_timer_sched_read(void)
+{
+ return (u64)readl(owl_clksrc_base + OWL_Tx_VAL);
+}
+
+static int owl_timer_set_state_shutdown(struct clock_event_device *evt)
+{
+ owl_timer_set_enabled(owl_clkevt_base, false);
+
+ return 0;
+}
+
+static int owl_timer_set_state_oneshot(struct clock_event_device *evt)
+{
+ owl_timer_reset(owl_clkevt_base);
+
+ return 0;
+}
+
+static int owl_timer_tick_resume(struct clock_event_device *evt)
+{
+ return 0;
+}
+
+static int owl_timer_set_next_event(unsigned long evt,
+ struct clock_event_device *ev)
+{
+ void __iomem *base = owl_clkevt_base;
+
+ owl_timer_set_enabled(base, false);
+ writel(OWL_Tx_CTL_INTEN, base + OWL_Tx_CTL);
+ writel(0, base + OWL_Tx_VAL);
+ writel(evt, base + OWL_Tx_CMP);
+ owl_timer_set_enabled(base, true);
+
+ return 0;
+}
+
+static struct clock_event_device owl_clockevent = {
+ .name = "owl_tick",
+ .rating = 200,
+ .features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_DYNIRQ,
+ .set_state_shutdown = owl_timer_set_state_shutdown,
+ .set_state_oneshot = owl_timer_set_state_oneshot,
+ .tick_resume = owl_timer_tick_resume,
+ .set_next_event = owl_timer_set_next_event,
+};
+
+static irqreturn_t owl_timer1_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+
+ writel(OWL_Tx_CTL_PD, owl_clkevt_base + OWL_Tx_CTL);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static int __init owl_timer_init(struct device_node *node)
+{
+ struct clk *clk;
+ unsigned long rate;
+ int timer1_irq, ret;
+
+ owl_timer_base = of_io_request_and_map(node, 0, "owl-timer");
+ if (IS_ERR(owl_timer_base)) {
+ pr_err("Can't map timer registers\n");
+ return PTR_ERR(owl_timer_base);
+ }
+
+ owl_clksrc_base = owl_timer_base + 0x08;
+ owl_clkevt_base = owl_timer_base + 0x14;
+
+ timer1_irq = of_irq_get_byname(node, "timer1");
+ if (timer1_irq <= 0) {
+ pr_err("Can't parse timer1 IRQ\n");
+ return -EINVAL;
+ }
+
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ pr_err("Failed to get clock for clocksource (%d)\n", ret);
+ return ret;
+ }
+
+ rate = clk_get_rate(clk);
+
+ owl_timer_reset(owl_clksrc_base);
+ owl_timer_set_enabled(owl_clksrc_base, true);
+
+ sched_clock_register(owl_timer_sched_read, 32, rate);
+ ret = clocksource_mmio_init(owl_clksrc_base + OWL_Tx_VAL, node->name,
+ rate, 200, 32, clocksource_mmio_readl_up);
+ if (ret) {
+ pr_err("Failed to register clocksource (%d)\n", ret);
+ return ret;
+ }
+
+ owl_timer_reset(owl_clkevt_base);
+
+ ret = request_irq(timer1_irq, owl_timer1_interrupt, IRQF_TIMER,
+ "owl-timer", &owl_clockevent);
+ if (ret) {
+ pr_err("failed to request irq %d\n", timer1_irq);
+ return ret;
+ }
+
+ owl_clockevent.cpumask = cpumask_of(0);
+ owl_clockevent.irq = timer1_irq;
+
+ clockevents_config_and_register(&owl_clockevent, rate,
+ 0xf, 0xffffffff);
+
+ return 0;
+}
+TIMER_OF_DECLARE(owl_s500, "actions,s500-timer", owl_timer_init);
+TIMER_OF_DECLARE(owl_s700, "actions,s700-timer", owl_timer_init);
+TIMER_OF_DECLARE(owl_s900, "actions,s900-timer", owl_timer_init);
diff --git a/drivers/clocksource/timer-pistachio.c b/drivers/clocksource/timer-pistachio.c
new file mode 100644
index 0000000000..57b2197a0b
--- /dev/null
+++ b/drivers/clocksource/timer-pistachio.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Pistachio clocksource based on general-purpose timers
+ *
+ * Copyright (C) 2015 Imagination Technologies
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/sched_clock.h>
+#include <linux/time.h>
+
+/* Top level reg */
+#define CR_TIMER_CTRL_CFG 0x00
+#define TIMER_ME_GLOBAL BIT(0)
+#define CR_TIMER_REV 0x10
+
+/* Timer specific registers */
+#define TIMER_CFG 0x20
+#define TIMER_ME_LOCAL BIT(0)
+#define TIMER_RELOAD_VALUE 0x24
+#define TIMER_CURRENT_VALUE 0x28
+#define TIMER_CURRENT_OVERFLOW_VALUE 0x2C
+#define TIMER_IRQ_STATUS 0x30
+#define TIMER_IRQ_CLEAR 0x34
+#define TIMER_IRQ_MASK 0x38
+
+#define PERIP_TIMER_CONTROL 0x90
+
+/* Timer specific configuration Values */
+#define RELOAD_VALUE 0xffffffff
+
+struct pistachio_clocksource {
+ void __iomem *base;
+ raw_spinlock_t lock;
+ struct clocksource cs;
+};
+
+static struct pistachio_clocksource pcs_gpt;
+
+#define to_pistachio_clocksource(cs) \
+ container_of(cs, struct pistachio_clocksource, cs)
+
+static inline u32 gpt_readl(void __iomem *base, u32 offset, u32 gpt_id)
+{
+ return readl(base + 0x20 * gpt_id + offset);
+}
+
+static inline void gpt_writel(void __iomem *base, u32 value, u32 offset,
+ u32 gpt_id)
+{
+ writel(value, base + 0x20 * gpt_id + offset);
+}
+
+static u64 notrace
+pistachio_clocksource_read_cycles(struct clocksource *cs)
+{
+ struct pistachio_clocksource *pcs = to_pistachio_clocksource(cs);
+ __maybe_unused u32 overflow;
+ u32 counter;
+ unsigned long flags;
+
+ /*
+ * The counter value is only refreshed after the overflow value is read.
+ * And they must be read in strict order, hence raw spin lock added.
+ */
+
+ raw_spin_lock_irqsave(&pcs->lock, flags);
+ overflow = gpt_readl(pcs->base, TIMER_CURRENT_OVERFLOW_VALUE, 0);
+ counter = gpt_readl(pcs->base, TIMER_CURRENT_VALUE, 0);
+ raw_spin_unlock_irqrestore(&pcs->lock, flags);
+
+ return (u64)~counter;
+}
+
+static u64 notrace pistachio_read_sched_clock(void)
+{
+ return pistachio_clocksource_read_cycles(&pcs_gpt.cs);
+}
+
+static void pistachio_clksrc_set_mode(struct clocksource *cs, int timeridx,
+ int enable)
+{
+ struct pistachio_clocksource *pcs = to_pistachio_clocksource(cs);
+ u32 val;
+
+ val = gpt_readl(pcs->base, TIMER_CFG, timeridx);
+ if (enable)
+ val |= TIMER_ME_LOCAL;
+ else
+ val &= ~TIMER_ME_LOCAL;
+
+ gpt_writel(pcs->base, val, TIMER_CFG, timeridx);
+}
+
+static void pistachio_clksrc_enable(struct clocksource *cs, int timeridx)
+{
+ struct pistachio_clocksource *pcs = to_pistachio_clocksource(cs);
+
+ /* Disable GPT local before loading reload value */
+ pistachio_clksrc_set_mode(cs, timeridx, false);
+ gpt_writel(pcs->base, RELOAD_VALUE, TIMER_RELOAD_VALUE, timeridx);
+ pistachio_clksrc_set_mode(cs, timeridx, true);
+}
+
+static void pistachio_clksrc_disable(struct clocksource *cs, int timeridx)
+{
+ /* Disable GPT local */
+ pistachio_clksrc_set_mode(cs, timeridx, false);
+}
+
+static int pistachio_clocksource_enable(struct clocksource *cs)
+{
+ pistachio_clksrc_enable(cs, 0);
+ return 0;
+}
+
+static void pistachio_clocksource_disable(struct clocksource *cs)
+{
+ pistachio_clksrc_disable(cs, 0);
+}
+
+/* Desirable clock source for pistachio platform */
+static struct pistachio_clocksource pcs_gpt = {
+ .cs = {
+ .name = "gptimer",
+ .rating = 300,
+ .enable = pistachio_clocksource_enable,
+ .disable = pistachio_clocksource_disable,
+ .read = pistachio_clocksource_read_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS |
+ CLOCK_SOURCE_SUSPEND_NONSTOP,
+ },
+};
+
+static int __init pistachio_clksrc_of_init(struct device_node *node)
+{
+ struct clk *sys_clk, *fast_clk;
+ struct regmap *periph_regs;
+ unsigned long rate;
+ int ret;
+
+ pcs_gpt.base = of_iomap(node, 0);
+ if (!pcs_gpt.base) {
+ pr_err("cannot iomap\n");
+ return -ENXIO;
+ }
+
+ periph_regs = syscon_regmap_lookup_by_phandle(node, "img,cr-periph");
+ if (IS_ERR(periph_regs)) {
+ pr_err("cannot get peripheral regmap (%ld)\n",
+ PTR_ERR(periph_regs));
+ return PTR_ERR(periph_regs);
+ }
+
+ /* Switch to using the fast counter clock */
+ ret = regmap_update_bits(periph_regs, PERIP_TIMER_CONTROL,
+ 0xf, 0x0);
+ if (ret)
+ return ret;
+
+ sys_clk = of_clk_get_by_name(node, "sys");
+ if (IS_ERR(sys_clk)) {
+ pr_err("clock get failed (%ld)\n", PTR_ERR(sys_clk));
+ return PTR_ERR(sys_clk);
+ }
+
+ fast_clk = of_clk_get_by_name(node, "fast");
+ if (IS_ERR(fast_clk)) {
+ pr_err("clock get failed (%lu)\n", PTR_ERR(fast_clk));
+ return PTR_ERR(fast_clk);
+ }
+
+ ret = clk_prepare_enable(sys_clk);
+ if (ret < 0) {
+ pr_err("failed to enable clock (%d)\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(fast_clk);
+ if (ret < 0) {
+ pr_err("failed to enable clock (%d)\n", ret);
+ clk_disable_unprepare(sys_clk);
+ return ret;
+ }
+
+ rate = clk_get_rate(fast_clk);
+
+ /* Disable irq's for clocksource usage */
+ gpt_writel(pcs_gpt.base, 0, TIMER_IRQ_MASK, 0);
+ gpt_writel(pcs_gpt.base, 0, TIMER_IRQ_MASK, 1);
+ gpt_writel(pcs_gpt.base, 0, TIMER_IRQ_MASK, 2);
+ gpt_writel(pcs_gpt.base, 0, TIMER_IRQ_MASK, 3);
+
+ /* Enable timer block */
+ writel(TIMER_ME_GLOBAL, pcs_gpt.base);
+
+ raw_spin_lock_init(&pcs_gpt.lock);
+ sched_clock_register(pistachio_read_sched_clock, 32, rate);
+ return clocksource_register_hz(&pcs_gpt.cs, rate);
+}
+TIMER_OF_DECLARE(pistachio_gptimer, "img,pistachio-gptimer",
+ pistachio_clksrc_of_init);
diff --git a/drivers/clocksource/timer-probe.c b/drivers/clocksource/timer-probe.c
new file mode 100644
index 0000000000..b7860bc0db
--- /dev/null
+++ b/drivers/clocksource/timer-probe.c
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ */
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/clocksource.h>
+
+extern struct of_device_id __timer_of_table[];
+
+static const struct of_device_id __timer_of_table_sentinel
+ __used __section("__timer_of_table_end");
+
+void __init timer_probe(void)
+{
+ struct device_node *np;
+ const struct of_device_id *match;
+ of_init_fn_1_ret init_func_ret;
+ unsigned timers = 0;
+ int ret;
+
+ for_each_matching_node_and_match(np, __timer_of_table, &match) {
+ if (!of_device_is_available(np))
+ continue;
+
+ init_func_ret = match->data;
+
+ ret = init_func_ret(np);
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ pr_err("Failed to initialize '%pOF': %d\n", np,
+ ret);
+ continue;
+ }
+
+ timers++;
+ }
+
+ timers += acpi_probe_device_table(timer);
+
+ if (!timers)
+ pr_crit("%s: no matching timers found\n", __func__);
+}
diff --git a/drivers/clocksource/timer-pxa.c b/drivers/clocksource/timer-pxa.c
new file mode 100644
index 0000000000..7ad0e5adb2
--- /dev/null
+++ b/drivers/clocksource/timer-pxa.c
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-pxa/time.c
+ *
+ * PXA clocksource, clockevents, and OST interrupt handlers.
+ * Copyright (c) 2007 by Bill Gatliff <bgat@billgatliff.com>.
+ *
+ * Derived from Nicolas Pitre's PXA timer handler Copyright (c) 2001
+ * by MontaVista Software, Inc. (Nico, your code rocks!)
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched/clock.h>
+#include <linux/sched_clock.h>
+
+#include <clocksource/pxa.h>
+
+#include <asm/div64.h>
+
+#define OSMR0 0x00 /* OS Timer 0 Match Register */
+#define OSMR1 0x04 /* OS Timer 1 Match Register */
+#define OSMR2 0x08 /* OS Timer 2 Match Register */
+#define OSMR3 0x0C /* OS Timer 3 Match Register */
+
+#define OSCR 0x10 /* OS Timer Counter Register */
+#define OSSR 0x14 /* OS Timer Status Register */
+#define OWER 0x18 /* OS Timer Watchdog Enable Register */
+#define OIER 0x1C /* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3 (1 << 3) /* Match status channel 3 */
+#define OSSR_M2 (1 << 2) /* Match status channel 2 */
+#define OSSR_M1 (1 << 1) /* Match status channel 1 */
+#define OSSR_M0 (1 << 0) /* Match status channel 0 */
+
+#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
+
+/*
+ * This is PXA's sched_clock implementation. This has a resolution
+ * of at least 308 ns and a maximum value of 208 days.
+ *
+ * The return value is guaranteed to be monotonic in that range as
+ * long as there is always less than 582 seconds between successive
+ * calls to sched_clock() which should always be the case in practice.
+ */
+
+#define timer_readl(reg) readl_relaxed(timer_base + (reg))
+#define timer_writel(val, reg) writel_relaxed((val), timer_base + (reg))
+
+static void __iomem *timer_base;
+
+static u64 notrace pxa_read_sched_clock(void)
+{
+ return timer_readl(OSCR);
+}
+
+
+#define MIN_OSCR_DELTA 16
+
+static irqreturn_t
+pxa_ost0_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *c = dev_id;
+
+ /* Disarm the compare/match, signal the event. */
+ timer_writel(timer_readl(OIER) & ~OIER_E0, OIER);
+ timer_writel(OSSR_M0, OSSR);
+ c->event_handler(c);
+
+ return IRQ_HANDLED;
+}
+
+static int
+pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev)
+{
+ unsigned long next, oscr;
+
+ timer_writel(timer_readl(OIER) | OIER_E0, OIER);
+ next = timer_readl(OSCR) + delta;
+ timer_writel(next, OSMR0);
+ oscr = timer_readl(OSCR);
+
+ return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
+}
+
+static int pxa_osmr0_shutdown(struct clock_event_device *evt)
+{
+ /* initializing, released, or preparing for suspend */
+ timer_writel(timer_readl(OIER) & ~OIER_E0, OIER);
+ timer_writel(OSSR_M0, OSSR);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static unsigned long osmr[4], oier, oscr;
+
+static void pxa_timer_suspend(struct clock_event_device *cedev)
+{
+ osmr[0] = timer_readl(OSMR0);
+ osmr[1] = timer_readl(OSMR1);
+ osmr[2] = timer_readl(OSMR2);
+ osmr[3] = timer_readl(OSMR3);
+ oier = timer_readl(OIER);
+ oscr = timer_readl(OSCR);
+}
+
+static void pxa_timer_resume(struct clock_event_device *cedev)
+{
+ /*
+ * Ensure that we have at least MIN_OSCR_DELTA between match
+ * register 0 and the OSCR, to guarantee that we will receive
+ * the one-shot timer interrupt. We adjust OSMR0 in preference
+ * to OSCR to guarantee that OSCR is monotonically incrementing.
+ */
+ if (osmr[0] - oscr < MIN_OSCR_DELTA)
+ osmr[0] += MIN_OSCR_DELTA;
+
+ timer_writel(osmr[0], OSMR0);
+ timer_writel(osmr[1], OSMR1);
+ timer_writel(osmr[2], OSMR2);
+ timer_writel(osmr[3], OSMR3);
+ timer_writel(oier, OIER);
+ timer_writel(oscr, OSCR);
+}
+#else
+#define pxa_timer_suspend NULL
+#define pxa_timer_resume NULL
+#endif
+
+static struct clock_event_device ckevt_pxa_osmr0 = {
+ .name = "osmr0",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .set_next_event = pxa_osmr0_set_next_event,
+ .set_state_shutdown = pxa_osmr0_shutdown,
+ .set_state_oneshot = pxa_osmr0_shutdown,
+ .suspend = pxa_timer_suspend,
+ .resume = pxa_timer_resume,
+};
+
+static int __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
+{
+ int ret;
+
+ timer_writel(0, OIER);
+ timer_writel(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
+
+ sched_clock_register(pxa_read_sched_clock, 32, clock_tick_rate);
+
+ ckevt_pxa_osmr0.cpumask = cpumask_of(0);
+
+ ret = request_irq(irq, pxa_ost0_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+ "ost0", &ckevt_pxa_osmr0);
+ if (ret) {
+ pr_err("Failed to setup irq\n");
+ return ret;
+ }
+
+ ret = clocksource_mmio_init(timer_base + OSCR, "oscr0", clock_tick_rate, 200,
+ 32, clocksource_mmio_readl_up);
+ if (ret) {
+ pr_err("Failed to init clocksource\n");
+ return ret;
+ }
+
+ clockevents_config_and_register(&ckevt_pxa_osmr0, clock_tick_rate,
+ MIN_OSCR_DELTA * 2, 0x7fffffff);
+
+ return 0;
+}
+
+static int __init pxa_timer_dt_init(struct device_node *np)
+{
+ struct clk *clk;
+ int irq, ret;
+
+ /* timer registers are shared with watchdog timer */
+ timer_base = of_iomap(np, 0);
+ if (!timer_base) {
+ pr_err("%pOFn: unable to map resource\n", np);
+ return -ENXIO;
+ }
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_crit("%pOFn: unable to get clk\n", np);
+ return PTR_ERR(clk);
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_crit("Failed to prepare clock\n");
+ return ret;
+ }
+
+ /* we are only interested in OS-timer0 irq */
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq <= 0) {
+ pr_crit("%pOFn: unable to parse OS-timer0 irq\n", np);
+ return -EINVAL;
+ }
+
+ return pxa_timer_common_init(irq, clk_get_rate(clk));
+}
+TIMER_OF_DECLARE(pxa_timer, "marvell,pxa-timer", pxa_timer_dt_init);
+
+/*
+ * Legacy timer init for non device-tree boards.
+ */
+void __init pxa_timer_nodt_init(int irq, void __iomem *base)
+{
+ struct clk *clk;
+
+ timer_base = base;
+ clk = clk_get(NULL, "OSTIMER0");
+ if (clk && !IS_ERR(clk)) {
+ clk_prepare_enable(clk);
+ pxa_timer_common_init(irq, clk_get_rate(clk));
+ } else {
+ pr_crit("%s: unable to get clk\n", __func__);
+ }
+}
diff --git a/drivers/clocksource/timer-qcom.c b/drivers/clocksource/timer-qcom.c
new file mode 100644
index 0000000000..b4afe3a675
--- /dev/null
+++ b/drivers/clocksource/timer-qcom.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2009-2012,2014, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+#include <asm/delay.h>
+
+#define TIMER_MATCH_VAL 0x0000
+#define TIMER_COUNT_VAL 0x0004
+#define TIMER_ENABLE 0x0008
+#define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1)
+#define TIMER_ENABLE_EN BIT(0)
+#define TIMER_CLEAR 0x000C
+#define DGT_CLK_CTL 0x10
+#define DGT_CLK_CTL_DIV_4 0x3
+#define TIMER_STS_GPT0_CLR_PEND BIT(10)
+
+#define GPT_HZ 32768
+
+static void __iomem *event_base;
+static void __iomem *sts_base;
+
+static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ /* Stop the timer tick */
+ if (clockevent_state_oneshot(evt)) {
+ u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
+ ctrl &= ~TIMER_ENABLE_EN;
+ writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+ }
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static int msm_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
+
+ ctrl &= ~TIMER_ENABLE_EN;
+ writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+
+ writel_relaxed(ctrl, event_base + TIMER_CLEAR);
+ writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
+
+ if (sts_base)
+ while (readl_relaxed(sts_base) & TIMER_STS_GPT0_CLR_PEND)
+ cpu_relax();
+
+ writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
+ return 0;
+}
+
+static int msm_timer_shutdown(struct clock_event_device *evt)
+{
+ u32 ctrl;
+
+ ctrl = readl_relaxed(event_base + TIMER_ENABLE);
+ ctrl &= ~(TIMER_ENABLE_EN | TIMER_ENABLE_CLR_ON_MATCH_EN);
+ writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+ return 0;
+}
+
+static struct clock_event_device __percpu *msm_evt;
+
+static void __iomem *source_base;
+
+static notrace u64 msm_read_timer_count(struct clocksource *cs)
+{
+ return readl_relaxed(source_base + TIMER_COUNT_VAL);
+}
+
+static struct clocksource msm_clocksource = {
+ .name = "dg_timer",
+ .rating = 300,
+ .read = msm_read_timer_count,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int msm_timer_irq;
+static int msm_timer_has_ppi;
+
+static int msm_local_timer_starting_cpu(unsigned int cpu)
+{
+ struct clock_event_device *evt = per_cpu_ptr(msm_evt, cpu);
+ int err;
+
+ evt->irq = msm_timer_irq;
+ evt->name = "msm_timer";
+ evt->features = CLOCK_EVT_FEAT_ONESHOT;
+ evt->rating = 200;
+ evt->set_state_shutdown = msm_timer_shutdown;
+ evt->set_state_oneshot = msm_timer_shutdown;
+ evt->tick_resume = msm_timer_shutdown;
+ evt->set_next_event = msm_timer_set_next_event;
+ evt->cpumask = cpumask_of(cpu);
+
+ clockevents_config_and_register(evt, GPT_HZ, 4, 0xffffffff);
+
+ if (msm_timer_has_ppi) {
+ enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
+ } else {
+ err = request_irq(evt->irq, msm_timer_interrupt,
+ IRQF_TIMER | IRQF_NOBALANCING |
+ IRQF_TRIGGER_RISING, "gp_timer", evt);
+ if (err)
+ pr_err("request_irq failed\n");
+ }
+
+ return 0;
+}
+
+static int msm_local_timer_dying_cpu(unsigned int cpu)
+{
+ struct clock_event_device *evt = per_cpu_ptr(msm_evt, cpu);
+
+ evt->set_state_shutdown(evt);
+ disable_percpu_irq(evt->irq);
+ return 0;
+}
+
+static u64 notrace msm_sched_clock_read(void)
+{
+ return msm_clocksource.read(&msm_clocksource);
+}
+
+static unsigned long msm_read_current_timer(void)
+{
+ return msm_clocksource.read(&msm_clocksource);
+}
+
+static struct delay_timer msm_delay_timer = {
+ .read_current_timer = msm_read_current_timer,
+};
+
+static int __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
+ bool percpu)
+{
+ struct clocksource *cs = &msm_clocksource;
+ int res = 0;
+
+ msm_timer_irq = irq;
+ msm_timer_has_ppi = percpu;
+
+ msm_evt = alloc_percpu(struct clock_event_device);
+ if (!msm_evt) {
+ pr_err("memory allocation failed for clockevents\n");
+ goto err;
+ }
+
+ if (percpu)
+ res = request_percpu_irq(irq, msm_timer_interrupt,
+ "gp_timer", msm_evt);
+
+ if (res) {
+ pr_err("request_percpu_irq failed\n");
+ } else {
+ /* Install and invoke hotplug callbacks */
+ res = cpuhp_setup_state(CPUHP_AP_QCOM_TIMER_STARTING,
+ "clockevents/qcom/timer:starting",
+ msm_local_timer_starting_cpu,
+ msm_local_timer_dying_cpu);
+ if (res) {
+ free_percpu_irq(irq, msm_evt);
+ goto err;
+ }
+ }
+
+err:
+ writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE);
+ res = clocksource_register_hz(cs, dgt_hz);
+ if (res)
+ pr_err("clocksource_register failed\n");
+ sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz);
+ msm_delay_timer.freq = dgt_hz;
+ register_current_timer_delay(&msm_delay_timer);
+
+ return res;
+}
+
+static int __init msm_dt_timer_init(struct device_node *np)
+{
+ u32 freq;
+ int irq, ret;
+ struct resource res;
+ u32 percpu_offset;
+ void __iomem *base;
+ void __iomem *cpu0_base;
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ pr_err("Failed to map event base\n");
+ return -ENXIO;
+ }
+
+ /* We use GPT0 for the clockevent */
+ irq = irq_of_parse_and_map(np, 1);
+ if (irq <= 0) {
+ pr_err("Can't get irq\n");
+ return -EINVAL;
+ }
+
+ /* We use CPU0's DGT for the clocksource */
+ if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
+ percpu_offset = 0;
+
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret) {
+ pr_err("Failed to parse DGT resource\n");
+ return ret;
+ }
+
+ cpu0_base = ioremap(res.start + percpu_offset, resource_size(&res));
+ if (!cpu0_base) {
+ pr_err("Failed to map source base\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(np, "clock-frequency", &freq)) {
+ pr_err("Unknown frequency\n");
+ return -EINVAL;
+ }
+
+ event_base = base + 0x4;
+ sts_base = base + 0x88;
+ source_base = cpu0_base + 0x24;
+ freq /= 4;
+ writel_relaxed(DGT_CLK_CTL_DIV_4, source_base + DGT_CLK_CTL);
+
+ return msm_timer_init(freq, 32, irq, !!percpu_offset);
+}
+TIMER_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
+TIMER_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);
diff --git a/drivers/clocksource/timer-rda.c b/drivers/clocksource/timer-rda.c
new file mode 100644
index 0000000000..fd1199c189
--- /dev/null
+++ b/drivers/clocksource/timer-rda.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RDA8810PL SoC timer driver
+ *
+ * Copyright RDA Microelectronics Company Limited
+ * Copyright (c) 2017 Andreas Färber
+ * Copyright (c) 2018 Manivannan Sadhasivam
+ *
+ * RDA8810PL has two independent timers: OSTIMER (56 bit) and HWTIMER (64 bit).
+ * Each timer provides optional interrupt support. In this driver, OSTIMER is
+ * used for clockevents and HWTIMER is used for clocksource.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+#include "timer-of.h"
+
+#define RDA_OSTIMER_LOADVAL_L 0x000
+#define RDA_OSTIMER_CTRL 0x004
+#define RDA_HWTIMER_LOCKVAL_L 0x024
+#define RDA_HWTIMER_LOCKVAL_H 0x028
+#define RDA_TIMER_IRQ_MASK_SET 0x02c
+#define RDA_TIMER_IRQ_MASK_CLR 0x030
+#define RDA_TIMER_IRQ_CLR 0x034
+
+#define RDA_OSTIMER_CTRL_ENABLE BIT(24)
+#define RDA_OSTIMER_CTRL_REPEAT BIT(28)
+#define RDA_OSTIMER_CTRL_LOAD BIT(30)
+
+#define RDA_TIMER_IRQ_MASK_OSTIMER BIT(0)
+
+#define RDA_TIMER_IRQ_CLR_OSTIMER BIT(0)
+
+static int rda_ostimer_start(void __iomem *base, bool periodic, u64 cycles)
+{
+ u32 ctrl, load_l;
+
+ load_l = (u32)cycles;
+ ctrl = ((cycles >> 32) & 0xffffff);
+ ctrl |= RDA_OSTIMER_CTRL_LOAD | RDA_OSTIMER_CTRL_ENABLE;
+ if (periodic)
+ ctrl |= RDA_OSTIMER_CTRL_REPEAT;
+
+ /* Enable ostimer interrupt first */
+ writel_relaxed(RDA_TIMER_IRQ_MASK_OSTIMER,
+ base + RDA_TIMER_IRQ_MASK_SET);
+
+ /* Write low 32 bits first, high 24 bits are with ctrl */
+ writel_relaxed(load_l, base + RDA_OSTIMER_LOADVAL_L);
+ writel_relaxed(ctrl, base + RDA_OSTIMER_CTRL);
+
+ return 0;
+}
+
+static int rda_ostimer_stop(void __iomem *base)
+{
+ /* Disable ostimer interrupt first */
+ writel_relaxed(RDA_TIMER_IRQ_MASK_OSTIMER,
+ base + RDA_TIMER_IRQ_MASK_CLR);
+
+ writel_relaxed(0, base + RDA_OSTIMER_CTRL);
+
+ return 0;
+}
+
+static int rda_ostimer_set_state_shutdown(struct clock_event_device *evt)
+{
+ struct timer_of *to = to_timer_of(evt);
+
+ rda_ostimer_stop(timer_of_base(to));
+
+ return 0;
+}
+
+static int rda_ostimer_set_state_oneshot(struct clock_event_device *evt)
+{
+ struct timer_of *to = to_timer_of(evt);
+
+ rda_ostimer_stop(timer_of_base(to));
+
+ return 0;
+}
+
+static int rda_ostimer_set_state_periodic(struct clock_event_device *evt)
+{
+ struct timer_of *to = to_timer_of(evt);
+ unsigned long cycles_per_jiffy;
+
+ rda_ostimer_stop(timer_of_base(to));
+
+ cycles_per_jiffy = ((unsigned long long)NSEC_PER_SEC / HZ *
+ evt->mult) >> evt->shift;
+ rda_ostimer_start(timer_of_base(to), true, cycles_per_jiffy);
+
+ return 0;
+}
+
+static int rda_ostimer_tick_resume(struct clock_event_device *evt)
+{
+ return 0;
+}
+
+static int rda_ostimer_set_next_event(unsigned long evt,
+ struct clock_event_device *ev)
+{
+ struct timer_of *to = to_timer_of(ev);
+
+ rda_ostimer_start(timer_of_base(to), false, evt);
+
+ return 0;
+}
+
+static irqreturn_t rda_ostimer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ struct timer_of *to = to_timer_of(evt);
+
+ /* clear timer int */
+ writel_relaxed(RDA_TIMER_IRQ_CLR_OSTIMER,
+ timer_of_base(to) + RDA_TIMER_IRQ_CLR);
+
+ if (evt->event_handler)
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct timer_of rda_ostimer_of = {
+ .flags = TIMER_OF_IRQ | TIMER_OF_BASE,
+
+ .clkevt = {
+ .name = "rda-ostimer",
+ .rating = 250,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_DYNIRQ,
+ .set_state_shutdown = rda_ostimer_set_state_shutdown,
+ .set_state_oneshot = rda_ostimer_set_state_oneshot,
+ .set_state_periodic = rda_ostimer_set_state_periodic,
+ .tick_resume = rda_ostimer_tick_resume,
+ .set_next_event = rda_ostimer_set_next_event,
+ },
+
+ .of_base = {
+ .name = "rda-timer",
+ .index = 0,
+ },
+
+ .of_irq = {
+ .name = "ostimer",
+ .handler = rda_ostimer_interrupt,
+ .flags = IRQF_TIMER,
+ },
+};
+
+static u64 rda_hwtimer_read(struct clocksource *cs)
+{
+ void __iomem *base = timer_of_base(&rda_ostimer_of);
+ u32 lo, hi;
+
+ /* Always read low 32 bits first */
+ do {
+ lo = readl_relaxed(base + RDA_HWTIMER_LOCKVAL_L);
+ hi = readl_relaxed(base + RDA_HWTIMER_LOCKVAL_H);
+ } while (hi != readl_relaxed(base + RDA_HWTIMER_LOCKVAL_H));
+
+ return ((u64)hi << 32) | lo;
+}
+
+static struct clocksource rda_hwtimer_clocksource = {
+ .name = "rda-timer",
+ .rating = 400,
+ .read = rda_hwtimer_read,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init rda_timer_init(struct device_node *np)
+{
+ unsigned long rate = 2000000;
+ int ret;
+
+ ret = timer_of_init(np, &rda_ostimer_of);
+ if (ret)
+ return ret;
+
+ clocksource_register_hz(&rda_hwtimer_clocksource, rate);
+
+ clockevents_config_and_register(&rda_ostimer_of.clkevt, rate,
+ 0x2, UINT_MAX);
+
+ return 0;
+}
+
+TIMER_OF_DECLARE(rda8810pl, "rda,8810pl-timer", rda_timer_init);
diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
new file mode 100644
index 0000000000..da3071b387
--- /dev/null
+++ b/drivers/clocksource/timer-riscv.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Regents of the University of California
+ * Copyright (C) 2017 SiFive
+ *
+ * All RISC-V systems have a timer attached to every hart. These timers can
+ * either be read from the "time" and "timeh" CSRs, and can use the SBI to
+ * setup events, or directly accessed using MMIO registers.
+ */
+
+#define pr_fmt(fmt) "riscv-timer: " fmt
+
+#include <linux/acpi.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/sched_clock.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
+#include <clocksource/timer-riscv.h>
+#include <asm/smp.h>
+#include <asm/hwcap.h>
+#include <asm/sbi.h>
+#include <asm/timex.h>
+
+static DEFINE_STATIC_KEY_FALSE(riscv_sstc_available);
+static bool riscv_timer_cannot_wake_cpu;
+
+static int riscv_clock_next_event(unsigned long delta,
+ struct clock_event_device *ce)
+{
+ u64 next_tval = get_cycles64() + delta;
+
+ csr_set(CSR_IE, IE_TIE);
+ if (static_branch_likely(&riscv_sstc_available)) {
+#if defined(CONFIG_32BIT)
+ csr_write(CSR_STIMECMP, next_tval & 0xFFFFFFFF);
+ csr_write(CSR_STIMECMPH, next_tval >> 32);
+#else
+ csr_write(CSR_STIMECMP, next_tval);
+#endif
+ } else
+ sbi_set_timer(next_tval);
+
+ return 0;
+}
+
+static unsigned int riscv_clock_event_irq;
+static DEFINE_PER_CPU(struct clock_event_device, riscv_clock_event) = {
+ .name = "riscv_timer_clockevent",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 100,
+ .set_next_event = riscv_clock_next_event,
+};
+
+/*
+ * It is guaranteed that all the timers across all the harts are synchronized
+ * within one tick of each other, so while this could technically go
+ * backwards when hopping between CPUs, practically it won't happen.
+ */
+static unsigned long long riscv_clocksource_rdtime(struct clocksource *cs)
+{
+ return get_cycles64();
+}
+
+static u64 notrace riscv_sched_clock(void)
+{
+ return get_cycles64();
+}
+
+static struct clocksource riscv_clocksource = {
+ .name = "riscv_clocksource",
+ .rating = 400,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .read = riscv_clocksource_rdtime,
+#if IS_ENABLED(CONFIG_GENERIC_GETTIMEOFDAY)
+ .vdso_clock_mode = VDSO_CLOCKMODE_ARCHTIMER,
+#else
+ .vdso_clock_mode = VDSO_CLOCKMODE_NONE,
+#endif
+};
+
+static int riscv_timer_starting_cpu(unsigned int cpu)
+{
+ struct clock_event_device *ce = per_cpu_ptr(&riscv_clock_event, cpu);
+
+ ce->cpumask = cpumask_of(cpu);
+ ce->irq = riscv_clock_event_irq;
+ if (riscv_timer_cannot_wake_cpu)
+ ce->features |= CLOCK_EVT_FEAT_C3STOP;
+ clockevents_config_and_register(ce, riscv_timebase, 100, 0x7fffffff);
+
+ enable_percpu_irq(riscv_clock_event_irq,
+ irq_get_trigger_type(riscv_clock_event_irq));
+ return 0;
+}
+
+static int riscv_timer_dying_cpu(unsigned int cpu)
+{
+ disable_percpu_irq(riscv_clock_event_irq);
+ return 0;
+}
+
+void riscv_cs_get_mult_shift(u32 *mult, u32 *shift)
+{
+ *mult = riscv_clocksource.mult;
+ *shift = riscv_clocksource.shift;
+}
+EXPORT_SYMBOL_GPL(riscv_cs_get_mult_shift);
+
+/* called directly from the low-level interrupt handler */
+static irqreturn_t riscv_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evdev = this_cpu_ptr(&riscv_clock_event);
+
+ csr_clear(CSR_IE, IE_TIE);
+ evdev->event_handler(evdev);
+
+ return IRQ_HANDLED;
+}
+
+static int __init riscv_timer_init_common(void)
+{
+ int error;
+ struct irq_domain *domain;
+ struct fwnode_handle *intc_fwnode = riscv_get_intc_hwnode();
+
+ domain = irq_find_matching_fwnode(intc_fwnode, DOMAIN_BUS_ANY);
+ if (!domain) {
+ pr_err("Failed to find irq_domain for INTC node [%pfwP]\n",
+ intc_fwnode);
+ return -ENODEV;
+ }
+
+ riscv_clock_event_irq = irq_create_mapping(domain, RV_IRQ_TIMER);
+ if (!riscv_clock_event_irq) {
+ pr_err("Failed to map timer interrupt for node [%pfwP]\n", intc_fwnode);
+ return -ENODEV;
+ }
+
+ error = clocksource_register_hz(&riscv_clocksource, riscv_timebase);
+ if (error) {
+ pr_err("RISCV timer registration failed [%d]\n", error);
+ return error;
+ }
+
+ sched_clock_register(riscv_sched_clock, 64, riscv_timebase);
+
+ error = request_percpu_irq(riscv_clock_event_irq,
+ riscv_timer_interrupt,
+ "riscv-timer", &riscv_clock_event);
+ if (error) {
+ pr_err("registering percpu irq failed [%d]\n", error);
+ return error;
+ }
+
+ if (riscv_isa_extension_available(NULL, SSTC)) {
+ pr_info("Timer interrupt in S-mode is available via sstc extension\n");
+ static_branch_enable(&riscv_sstc_available);
+ }
+
+ error = cpuhp_setup_state(CPUHP_AP_RISCV_TIMER_STARTING,
+ "clockevents/riscv/timer:starting",
+ riscv_timer_starting_cpu, riscv_timer_dying_cpu);
+ if (error)
+ pr_err("cpu hp setup state failed for RISCV timer [%d]\n",
+ error);
+
+ return error;
+}
+
+static int __init riscv_timer_init_dt(struct device_node *n)
+{
+ int cpuid, error;
+ unsigned long hartid;
+ struct device_node *child;
+
+ error = riscv_of_processor_hartid(n, &hartid);
+ if (error < 0) {
+ pr_warn("Invalid hartid for node [%pOF] error = [%lu]\n",
+ n, hartid);
+ return error;
+ }
+
+ cpuid = riscv_hartid_to_cpuid(hartid);
+ if (cpuid < 0) {
+ pr_warn("Invalid cpuid for hartid [%lu]\n", hartid);
+ return cpuid;
+ }
+
+ if (cpuid != smp_processor_id())
+ return 0;
+
+ child = of_find_compatible_node(NULL, NULL, "riscv,timer");
+ if (child) {
+ riscv_timer_cannot_wake_cpu = of_property_read_bool(child,
+ "riscv,timer-cannot-wake-cpu");
+ of_node_put(child);
+ }
+
+ return riscv_timer_init_common();
+}
+
+TIMER_OF_DECLARE(riscv_timer, "riscv", riscv_timer_init_dt);
+
+#ifdef CONFIG_ACPI
+static int __init riscv_timer_acpi_init(struct acpi_table_header *table)
+{
+ return riscv_timer_init_common();
+}
+
+TIMER_ACPI_DECLARE(aclint_mtimer, ACPI_SIG_RHCT, riscv_timer_acpi_init);
+
+#endif
diff --git a/drivers/clocksource/timer-rockchip.c b/drivers/clocksource/timer-rockchip.c
new file mode 100644
index 0000000000..1f95d0aca0
--- /dev/null
+++ b/drivers/clocksource/timer-rockchip.c
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip timer support
+ *
+ * Copyright (C) Daniel Lezcano <daniel.lezcano@linaro.org>
+ */
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define TIMER_NAME "rk_timer"
+
+#define TIMER_LOAD_COUNT0 0x00
+#define TIMER_LOAD_COUNT1 0x04
+#define TIMER_CURRENT_VALUE0 0x08
+#define TIMER_CURRENT_VALUE1 0x0C
+#define TIMER_CONTROL_REG3288 0x10
+#define TIMER_CONTROL_REG3399 0x1c
+#define TIMER_INT_STATUS 0x18
+
+#define TIMER_DISABLE 0x0
+#define TIMER_ENABLE 0x1
+#define TIMER_MODE_FREE_RUNNING (0 << 1)
+#define TIMER_MODE_USER_DEFINED_COUNT (1 << 1)
+#define TIMER_INT_UNMASK (1 << 2)
+
+struct rk_timer {
+ void __iomem *base;
+ void __iomem *ctrl;
+ struct clk *clk;
+ struct clk *pclk;
+ u32 freq;
+ int irq;
+};
+
+struct rk_clkevt {
+ struct clock_event_device ce;
+ struct rk_timer timer;
+};
+
+static struct rk_clkevt *rk_clkevt;
+static struct rk_timer *rk_clksrc;
+
+static inline struct rk_timer *rk_timer(struct clock_event_device *ce)
+{
+ return &container_of(ce, struct rk_clkevt, ce)->timer;
+}
+
+static inline void rk_timer_disable(struct rk_timer *timer)
+{
+ writel_relaxed(TIMER_DISABLE, timer->ctrl);
+}
+
+static inline void rk_timer_enable(struct rk_timer *timer, u32 flags)
+{
+ writel_relaxed(TIMER_ENABLE | flags, timer->ctrl);
+}
+
+static void rk_timer_update_counter(unsigned long cycles,
+ struct rk_timer *timer)
+{
+ writel_relaxed(cycles, timer->base + TIMER_LOAD_COUNT0);
+ writel_relaxed(0, timer->base + TIMER_LOAD_COUNT1);
+}
+
+static void rk_timer_interrupt_clear(struct rk_timer *timer)
+{
+ writel_relaxed(1, timer->base + TIMER_INT_STATUS);
+}
+
+static inline int rk_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *ce)
+{
+ struct rk_timer *timer = rk_timer(ce);
+
+ rk_timer_disable(timer);
+ rk_timer_update_counter(cycles, timer);
+ rk_timer_enable(timer, TIMER_MODE_USER_DEFINED_COUNT |
+ TIMER_INT_UNMASK);
+ return 0;
+}
+
+static int rk_timer_shutdown(struct clock_event_device *ce)
+{
+ struct rk_timer *timer = rk_timer(ce);
+
+ rk_timer_disable(timer);
+ return 0;
+}
+
+static int rk_timer_set_periodic(struct clock_event_device *ce)
+{
+ struct rk_timer *timer = rk_timer(ce);
+
+ rk_timer_disable(timer);
+ rk_timer_update_counter(timer->freq / HZ - 1, timer);
+ rk_timer_enable(timer, TIMER_MODE_FREE_RUNNING | TIMER_INT_UNMASK);
+ return 0;
+}
+
+static irqreturn_t rk_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *ce = dev_id;
+ struct rk_timer *timer = rk_timer(ce);
+
+ rk_timer_interrupt_clear(timer);
+
+ if (clockevent_state_oneshot(ce))
+ rk_timer_disable(timer);
+
+ ce->event_handler(ce);
+
+ return IRQ_HANDLED;
+}
+
+static u64 notrace rk_timer_sched_read(void)
+{
+ return ~readl_relaxed(rk_clksrc->base + TIMER_CURRENT_VALUE0);
+}
+
+static int __init
+rk_timer_probe(struct rk_timer *timer, struct device_node *np)
+{
+ struct clk *timer_clk;
+ struct clk *pclk;
+ int ret = -EINVAL, irq;
+ u32 ctrl_reg = TIMER_CONTROL_REG3288;
+
+ timer->base = of_iomap(np, 0);
+ if (!timer->base) {
+ pr_err("Failed to get base address for '%s'\n", TIMER_NAME);
+ return -ENXIO;
+ }
+
+ if (of_device_is_compatible(np, "rockchip,rk3399-timer"))
+ ctrl_reg = TIMER_CONTROL_REG3399;
+
+ timer->ctrl = timer->base + ctrl_reg;
+
+ pclk = of_clk_get_by_name(np, "pclk");
+ if (IS_ERR(pclk)) {
+ ret = PTR_ERR(pclk);
+ pr_err("Failed to get pclk for '%s'\n", TIMER_NAME);
+ goto out_unmap;
+ }
+
+ ret = clk_prepare_enable(pclk);
+ if (ret) {
+ pr_err("Failed to enable pclk for '%s'\n", TIMER_NAME);
+ goto out_unmap;
+ }
+ timer->pclk = pclk;
+
+ timer_clk = of_clk_get_by_name(np, "timer");
+ if (IS_ERR(timer_clk)) {
+ ret = PTR_ERR(timer_clk);
+ pr_err("Failed to get timer clock for '%s'\n", TIMER_NAME);
+ goto out_timer_clk;
+ }
+
+ ret = clk_prepare_enable(timer_clk);
+ if (ret) {
+ pr_err("Failed to enable timer clock\n");
+ goto out_timer_clk;
+ }
+ timer->clk = timer_clk;
+
+ timer->freq = clk_get_rate(timer_clk);
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq) {
+ ret = -EINVAL;
+ pr_err("Failed to map interrupts for '%s'\n", TIMER_NAME);
+ goto out_irq;
+ }
+ timer->irq = irq;
+
+ rk_timer_interrupt_clear(timer);
+ rk_timer_disable(timer);
+ return 0;
+
+out_irq:
+ clk_disable_unprepare(timer_clk);
+out_timer_clk:
+ clk_disable_unprepare(pclk);
+out_unmap:
+ iounmap(timer->base);
+
+ return ret;
+}
+
+static void __init rk_timer_cleanup(struct rk_timer *timer)
+{
+ clk_disable_unprepare(timer->clk);
+ clk_disable_unprepare(timer->pclk);
+ iounmap(timer->base);
+}
+
+static int __init rk_clkevt_init(struct device_node *np)
+{
+ struct clock_event_device *ce;
+ int ret = -EINVAL;
+
+ rk_clkevt = kzalloc(sizeof(struct rk_clkevt), GFP_KERNEL);
+ if (!rk_clkevt) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ret = rk_timer_probe(&rk_clkevt->timer, np);
+ if (ret)
+ goto out_probe;
+
+ ce = &rk_clkevt->ce;
+ ce->name = TIMER_NAME;
+ ce->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_DYNIRQ;
+ ce->set_next_event = rk_timer_set_next_event;
+ ce->set_state_shutdown = rk_timer_shutdown;
+ ce->set_state_periodic = rk_timer_set_periodic;
+ ce->irq = rk_clkevt->timer.irq;
+ ce->cpumask = cpu_possible_mask;
+ ce->rating = 250;
+
+ ret = request_irq(rk_clkevt->timer.irq, rk_timer_interrupt, IRQF_TIMER,
+ TIMER_NAME, ce);
+ if (ret) {
+ pr_err("Failed to initialize '%s': %d\n",
+ TIMER_NAME, ret);
+ goto out_irq;
+ }
+
+ clockevents_config_and_register(&rk_clkevt->ce,
+ rk_clkevt->timer.freq, 1, UINT_MAX);
+ return 0;
+
+out_irq:
+ rk_timer_cleanup(&rk_clkevt->timer);
+out_probe:
+ kfree(rk_clkevt);
+out:
+ /* Leave rk_clkevt not NULL to prevent future init */
+ rk_clkevt = ERR_PTR(ret);
+ return ret;
+}
+
+static int __init rk_clksrc_init(struct device_node *np)
+{
+ int ret = -EINVAL;
+
+ rk_clksrc = kzalloc(sizeof(struct rk_timer), GFP_KERNEL);
+ if (!rk_clksrc) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ret = rk_timer_probe(rk_clksrc, np);
+ if (ret)
+ goto out_probe;
+
+ rk_timer_update_counter(UINT_MAX, rk_clksrc);
+ rk_timer_enable(rk_clksrc, 0);
+
+ ret = clocksource_mmio_init(rk_clksrc->base + TIMER_CURRENT_VALUE0,
+ TIMER_NAME, rk_clksrc->freq, 250, 32,
+ clocksource_mmio_readl_down);
+ if (ret) {
+ pr_err("Failed to register clocksource\n");
+ goto out_clocksource;
+ }
+
+ sched_clock_register(rk_timer_sched_read, 32, rk_clksrc->freq);
+ return 0;
+
+out_clocksource:
+ rk_timer_cleanup(rk_clksrc);
+out_probe:
+ kfree(rk_clksrc);
+out:
+ /* Leave rk_clksrc not NULL to prevent future init */
+ rk_clksrc = ERR_PTR(ret);
+ return ret;
+}
+
+static int __init rk_timer_init(struct device_node *np)
+{
+ if (!rk_clkevt)
+ return rk_clkevt_init(np);
+
+ if (!rk_clksrc)
+ return rk_clksrc_init(np);
+
+ pr_err("Too many timer definitions for '%s'\n", TIMER_NAME);
+ return -EINVAL;
+}
+
+TIMER_OF_DECLARE(rk3288_timer, "rockchip,rk3288-timer", rk_timer_init);
+TIMER_OF_DECLARE(rk3399_timer, "rockchip,rk3399-timer", rk_timer_init);
diff --git a/drivers/clocksource/timer-sp.h b/drivers/clocksource/timer-sp.h
new file mode 100644
index 0000000000..811f840be0
--- /dev/null
+++ b/drivers/clocksource/timer-sp.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ARM timer implementation, found in Integrator, Versatile and Realview
+ * platforms. Not all platforms support all registers and bits in these
+ * registers, so we mark them with A for Integrator AP, C for Integrator
+ * CP, V for Versatile and R for Realview.
+ *
+ * Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview
+ * can have 16-bit or 32-bit selectable via a bit in the control register.
+ *
+ * Every SP804 contains two identical timers.
+ */
+#define NR_TIMERS 2
+#define TIMER_1_BASE 0x00
+#define TIMER_2_BASE 0x20
+
+#define TIMER_LOAD 0x00 /* ACVR rw */
+#define TIMER_VALUE 0x04 /* ACVR ro */
+#define TIMER_CTRL 0x08 /* ACVR rw */
+#define TIMER_CTRL_ONESHOT (1 << 0) /* CVR */
+#define TIMER_CTRL_32BIT (1 << 1) /* CVR */
+#define TIMER_CTRL_DIV1 (0 << 2) /* ACVR */
+#define TIMER_CTRL_DIV16 (1 << 2) /* ACVR */
+#define TIMER_CTRL_DIV256 (2 << 2) /* ACVR */
+#define TIMER_CTRL_IE (1 << 5) /* VR */
+#define TIMER_CTRL_PERIODIC (1 << 6) /* ACVR */
+#define TIMER_CTRL_ENABLE (1 << 7) /* ACVR */
+
+#define TIMER_INTCLR 0x0c /* ACVR wo */
+#define TIMER_RIS 0x10 /* CVR ro */
+#define TIMER_MIS 0x14 /* CVR ro */
+#define TIMER_BGLOAD 0x18 /* CVR rw */
+
+struct sp804_timer {
+ int load;
+ int load_h;
+ int value;
+ int value_h;
+ int ctrl;
+ int intclr;
+ int ris;
+ int mis;
+ int bgload;
+ int bgload_h;
+ int timer_base[NR_TIMERS];
+ int width;
+};
+
+struct sp804_clkevt {
+ void __iomem *base;
+ void __iomem *load;
+ void __iomem *load_h;
+ void __iomem *value;
+ void __iomem *value_h;
+ void __iomem *ctrl;
+ void __iomem *intclr;
+ void __iomem *ris;
+ void __iomem *mis;
+ void __iomem *bgload;
+ void __iomem *bgload_h;
+ unsigned long reload;
+ int width;
+};
diff --git a/drivers/clocksource/timer-sp804.c b/drivers/clocksource/timer-sp804.c
new file mode 100644
index 0000000000..cd1916c053
--- /dev/null
+++ b/drivers/clocksource/timer-sp804.c
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * linux/drivers/clocksource/timer-sp.c
+ *
+ * Copyright (C) 1999 - 2003 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_clk.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+#include "timer-sp.h"
+
+/* Hisilicon 64-bit timer(a variant of ARM SP804) */
+#define HISI_TIMER_1_BASE 0x00
+#define HISI_TIMER_2_BASE 0x40
+#define HISI_TIMER_LOAD 0x00
+#define HISI_TIMER_LOAD_H 0x04
+#define HISI_TIMER_VALUE 0x08
+#define HISI_TIMER_VALUE_H 0x0c
+#define HISI_TIMER_CTRL 0x10
+#define HISI_TIMER_INTCLR 0x14
+#define HISI_TIMER_RIS 0x18
+#define HISI_TIMER_MIS 0x1c
+#define HISI_TIMER_BGLOAD 0x20
+#define HISI_TIMER_BGLOAD_H 0x24
+
+static struct sp804_timer arm_sp804_timer __initdata = {
+ .load = TIMER_LOAD,
+ .value = TIMER_VALUE,
+ .ctrl = TIMER_CTRL,
+ .intclr = TIMER_INTCLR,
+ .timer_base = {TIMER_1_BASE, TIMER_2_BASE},
+ .width = 32,
+};
+
+static struct sp804_timer hisi_sp804_timer __initdata = {
+ .load = HISI_TIMER_LOAD,
+ .load_h = HISI_TIMER_LOAD_H,
+ .value = HISI_TIMER_VALUE,
+ .value_h = HISI_TIMER_VALUE_H,
+ .ctrl = HISI_TIMER_CTRL,
+ .intclr = HISI_TIMER_INTCLR,
+ .timer_base = {HISI_TIMER_1_BASE, HISI_TIMER_2_BASE},
+ .width = 64,
+};
+
+static struct sp804_clkevt sp804_clkevt[NR_TIMERS];
+
+static long __init sp804_get_clock_rate(struct clk *clk, const char *name)
+{
+ int err;
+
+ if (!clk)
+ clk = clk_get_sys("sp804", name);
+ if (IS_ERR(clk)) {
+ pr_err("%s clock not found: %ld\n", name, PTR_ERR(clk));
+ return PTR_ERR(clk);
+ }
+
+ err = clk_prepare_enable(clk);
+ if (err) {
+ pr_err("clock failed to enable: %d\n", err);
+ clk_put(clk);
+ return err;
+ }
+
+ return clk_get_rate(clk);
+}
+
+static struct sp804_clkevt * __init sp804_clkevt_get(void __iomem *base)
+{
+ int i;
+
+ for (i = 0; i < NR_TIMERS; i++) {
+ if (sp804_clkevt[i].base == base)
+ return &sp804_clkevt[i];
+ }
+
+ /* It's impossible to reach here */
+ WARN_ON(1);
+
+ return NULL;
+}
+
+static struct sp804_clkevt *sched_clkevt;
+
+static u64 notrace sp804_read(void)
+{
+ return ~readl_relaxed(sched_clkevt->value);
+}
+
+static int __init sp804_clocksource_and_sched_clock_init(void __iomem *base,
+ const char *name,
+ struct clk *clk,
+ int use_sched_clock)
+{
+ long rate;
+ struct sp804_clkevt *clkevt;
+
+ rate = sp804_get_clock_rate(clk, name);
+ if (rate < 0)
+ return -EINVAL;
+
+ clkevt = sp804_clkevt_get(base);
+
+ writel(0, clkevt->ctrl);
+ writel(0xffffffff, clkevt->load);
+ writel(0xffffffff, clkevt->value);
+ if (clkevt->width == 64) {
+ writel(0xffffffff, clkevt->load_h);
+ writel(0xffffffff, clkevt->value_h);
+ }
+ writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+ clkevt->ctrl);
+
+ clocksource_mmio_init(clkevt->value, name,
+ rate, 200, 32, clocksource_mmio_readl_down);
+
+ if (use_sched_clock) {
+ sched_clkevt = clkevt;
+ sched_clock_register(sp804_read, 32, rate);
+ }
+
+ return 0;
+}
+
+
+static struct sp804_clkevt *common_clkevt;
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ /* clear the interrupt */
+ writel(1, common_clkevt->intclr);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static inline void evt_timer_shutdown(struct clock_event_device *evt)
+{
+ writel(0, common_clkevt->ctrl);
+}
+
+static int sp804_shutdown(struct clock_event_device *evt)
+{
+ evt_timer_shutdown(evt);
+ return 0;
+}
+
+static int sp804_set_periodic(struct clock_event_device *evt)
+{
+ unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE |
+ TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
+
+ evt_timer_shutdown(evt);
+ writel(common_clkevt->reload, common_clkevt->load);
+ writel(ctrl, common_clkevt->ctrl);
+ return 0;
+}
+
+static int sp804_set_next_event(unsigned long next,
+ struct clock_event_device *evt)
+{
+ unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE |
+ TIMER_CTRL_ONESHOT | TIMER_CTRL_ENABLE;
+
+ writel(next, common_clkevt->load);
+ writel(ctrl, common_clkevt->ctrl);
+
+ return 0;
+}
+
+static struct clock_event_device sp804_clockevent = {
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_DYNIRQ,
+ .set_state_shutdown = sp804_shutdown,
+ .set_state_periodic = sp804_set_periodic,
+ .set_state_oneshot = sp804_shutdown,
+ .tick_resume = sp804_shutdown,
+ .set_next_event = sp804_set_next_event,
+ .rating = 300,
+};
+
+static int __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
+ struct clk *clk, const char *name)
+{
+ struct clock_event_device *evt = &sp804_clockevent;
+ long rate;
+
+ rate = sp804_get_clock_rate(clk, name);
+ if (rate < 0)
+ return -EINVAL;
+
+ common_clkevt = sp804_clkevt_get(base);
+ common_clkevt->reload = DIV_ROUND_CLOSEST(rate, HZ);
+ evt->name = name;
+ evt->irq = irq;
+ evt->cpumask = cpu_possible_mask;
+
+ writel(0, common_clkevt->ctrl);
+
+ if (request_irq(irq, sp804_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+ "timer", &sp804_clockevent))
+ pr_err("request_irq() failed\n");
+ clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
+
+ return 0;
+}
+
+static void __init sp804_clkevt_init(struct sp804_timer *timer, void __iomem *base)
+{
+ int i;
+
+ for (i = 0; i < NR_TIMERS; i++) {
+ void __iomem *timer_base;
+ struct sp804_clkevt *clkevt;
+
+ timer_base = base + timer->timer_base[i];
+ clkevt = &sp804_clkevt[i];
+ clkevt->base = timer_base;
+ clkevt->load = timer_base + timer->load;
+ clkevt->load_h = timer_base + timer->load_h;
+ clkevt->value = timer_base + timer->value;
+ clkevt->value_h = timer_base + timer->value_h;
+ clkevt->ctrl = timer_base + timer->ctrl;
+ clkevt->intclr = timer_base + timer->intclr;
+ clkevt->width = timer->width;
+ }
+}
+
+static int __init sp804_of_init(struct device_node *np, struct sp804_timer *timer)
+{
+ static bool initialized = false;
+ void __iomem *base;
+ void __iomem *timer1_base;
+ void __iomem *timer2_base;
+ int irq, ret = -EINVAL;
+ u32 irq_num = 0;
+ struct clk *clk1, *clk2;
+ const char *name = of_get_property(np, "compatible", NULL);
+
+ if (initialized) {
+ pr_debug("%pOF: skipping further SP804 timer device\n", np);
+ return 0;
+ }
+
+ base = of_iomap(np, 0);
+ if (!base)
+ return -ENXIO;
+
+ timer1_base = base + timer->timer_base[0];
+ timer2_base = base + timer->timer_base[1];
+
+ /* Ensure timers are disabled */
+ writel(0, timer1_base + timer->ctrl);
+ writel(0, timer2_base + timer->ctrl);
+
+ clk1 = of_clk_get(np, 0);
+ if (IS_ERR(clk1))
+ clk1 = NULL;
+
+ /* Get the 2nd clock if the timer has 3 timer clocks */
+ if (of_clk_get_parent_count(np) == 3) {
+ clk2 = of_clk_get(np, 1);
+ if (IS_ERR(clk2)) {
+ pr_err("%pOFn clock not found: %d\n", np,
+ (int)PTR_ERR(clk2));
+ clk2 = NULL;
+ }
+ } else
+ clk2 = clk1;
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq <= 0)
+ goto err;
+
+ sp804_clkevt_init(timer, base);
+
+ of_property_read_u32(np, "arm,sp804-has-irq", &irq_num);
+ if (irq_num == 2) {
+
+ ret = sp804_clockevents_init(timer2_base, irq, clk2, name);
+ if (ret)
+ goto err;
+
+ ret = sp804_clocksource_and_sched_clock_init(timer1_base,
+ name, clk1, 1);
+ if (ret)
+ goto err;
+ } else {
+
+ ret = sp804_clockevents_init(timer1_base, irq, clk1, name);
+ if (ret)
+ goto err;
+
+ ret = sp804_clocksource_and_sched_clock_init(timer2_base,
+ name, clk2, 1);
+ if (ret)
+ goto err;
+ }
+ initialized = true;
+
+ return 0;
+err:
+ iounmap(base);
+ return ret;
+}
+
+static int __init arm_sp804_of_init(struct device_node *np)
+{
+ return sp804_of_init(np, &arm_sp804_timer);
+}
+TIMER_OF_DECLARE(sp804, "arm,sp804", arm_sp804_of_init);
+
+static int __init hisi_sp804_of_init(struct device_node *np)
+{
+ return sp804_of_init(np, &hisi_sp804_timer);
+}
+TIMER_OF_DECLARE(hisi_sp804, "hisilicon,sp804", hisi_sp804_of_init);
+
+static int __init integrator_cp_of_init(struct device_node *np)
+{
+ static int init_count = 0;
+ void __iomem *base;
+ int irq, ret = -EINVAL;
+ const char *name = of_get_property(np, "compatible", NULL);
+ struct clk *clk;
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ pr_err("Failed to iomap\n");
+ return -ENXIO;
+ }
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("Failed to get clock\n");
+ return PTR_ERR(clk);
+ }
+
+ /* Ensure timer is disabled */
+ writel(0, base + arm_sp804_timer.ctrl);
+
+ if (init_count == 2 || !of_device_is_available(np))
+ goto err;
+
+ sp804_clkevt_init(&arm_sp804_timer, base);
+
+ if (!init_count) {
+ ret = sp804_clocksource_and_sched_clock_init(base,
+ name, clk, 0);
+ if (ret)
+ goto err;
+ } else {
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq <= 0)
+ goto err;
+
+ ret = sp804_clockevents_init(base, irq, clk, name);
+ if (ret)
+ goto err;
+ }
+
+ init_count++;
+ return 0;
+err:
+ iounmap(base);
+ return ret;
+}
+TIMER_OF_DECLARE(intcp, "arm,integrator-cp-timer", integrator_cp_of_init);
diff --git a/drivers/clocksource/timer-sprd.c b/drivers/clocksource/timer-sprd.c
new file mode 100644
index 0000000000..430cb99d8d
--- /dev/null
+++ b/drivers/clocksource/timer-sprd.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Spreadtrum Communications Inc.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+#include "timer-of.h"
+
+#define TIMER_NAME "sprd_timer"
+
+#define TIMER_LOAD_LO 0x0
+#define TIMER_LOAD_HI 0x4
+#define TIMER_VALUE_LO 0x8
+#define TIMER_VALUE_HI 0xc
+
+#define TIMER_CTL 0x10
+#define TIMER_CTL_PERIOD_MODE BIT(0)
+#define TIMER_CTL_ENABLE BIT(1)
+#define TIMER_CTL_64BIT_WIDTH BIT(16)
+
+#define TIMER_INT 0x14
+#define TIMER_INT_EN BIT(0)
+#define TIMER_INT_RAW_STS BIT(1)
+#define TIMER_INT_MASK_STS BIT(2)
+#define TIMER_INT_CLR BIT(3)
+
+#define TIMER_VALUE_SHDW_LO 0x18
+#define TIMER_VALUE_SHDW_HI 0x1c
+
+#define TIMER_VALUE_LO_MASK GENMASK(31, 0)
+
+static void sprd_timer_enable(void __iomem *base, u32 flag)
+{
+ u32 val = readl_relaxed(base + TIMER_CTL);
+
+ val |= TIMER_CTL_ENABLE;
+ if (flag & TIMER_CTL_64BIT_WIDTH)
+ val |= TIMER_CTL_64BIT_WIDTH;
+ else
+ val &= ~TIMER_CTL_64BIT_WIDTH;
+
+ if (flag & TIMER_CTL_PERIOD_MODE)
+ val |= TIMER_CTL_PERIOD_MODE;
+ else
+ val &= ~TIMER_CTL_PERIOD_MODE;
+
+ writel_relaxed(val, base + TIMER_CTL);
+}
+
+static void sprd_timer_disable(void __iomem *base)
+{
+ u32 val = readl_relaxed(base + TIMER_CTL);
+
+ val &= ~TIMER_CTL_ENABLE;
+ writel_relaxed(val, base + TIMER_CTL);
+}
+
+static void sprd_timer_update_counter(void __iomem *base, unsigned long cycles)
+{
+ writel_relaxed(cycles & TIMER_VALUE_LO_MASK, base + TIMER_LOAD_LO);
+ writel_relaxed(0, base + TIMER_LOAD_HI);
+}
+
+static void sprd_timer_enable_interrupt(void __iomem *base)
+{
+ writel_relaxed(TIMER_INT_EN, base + TIMER_INT);
+}
+
+static void sprd_timer_clear_interrupt(void __iomem *base)
+{
+ u32 val = readl_relaxed(base + TIMER_INT);
+
+ val |= TIMER_INT_CLR;
+ writel_relaxed(val, base + TIMER_INT);
+}
+
+static int sprd_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *ce)
+{
+ struct timer_of *to = to_timer_of(ce);
+
+ sprd_timer_disable(timer_of_base(to));
+ sprd_timer_update_counter(timer_of_base(to), cycles);
+ sprd_timer_enable(timer_of_base(to), 0);
+
+ return 0;
+}
+
+static int sprd_timer_set_periodic(struct clock_event_device *ce)
+{
+ struct timer_of *to = to_timer_of(ce);
+
+ sprd_timer_disable(timer_of_base(to));
+ sprd_timer_update_counter(timer_of_base(to), timer_of_period(to));
+ sprd_timer_enable(timer_of_base(to), TIMER_CTL_PERIOD_MODE);
+
+ return 0;
+}
+
+static int sprd_timer_shutdown(struct clock_event_device *ce)
+{
+ struct timer_of *to = to_timer_of(ce);
+
+ sprd_timer_disable(timer_of_base(to));
+ return 0;
+}
+
+static irqreturn_t sprd_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *ce = (struct clock_event_device *)dev_id;
+ struct timer_of *to = to_timer_of(ce);
+
+ sprd_timer_clear_interrupt(timer_of_base(to));
+
+ if (clockevent_state_oneshot(ce))
+ sprd_timer_disable(timer_of_base(to));
+
+ ce->event_handler(ce);
+ return IRQ_HANDLED;
+}
+
+static struct timer_of to = {
+ .flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
+
+ .clkevt = {
+ .name = TIMER_NAME,
+ .rating = 300,
+ .features = CLOCK_EVT_FEAT_DYNIRQ | CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_shutdown = sprd_timer_shutdown,
+ .set_state_periodic = sprd_timer_set_periodic,
+ .set_next_event = sprd_timer_set_next_event,
+ .cpumask = cpu_possible_mask,
+ },
+
+ .of_irq = {
+ .handler = sprd_timer_interrupt,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ },
+};
+
+static int __init sprd_timer_init(struct device_node *np)
+{
+ int ret;
+
+ ret = timer_of_init(np, &to);
+ if (ret)
+ return ret;
+
+ sprd_timer_enable_interrupt(timer_of_base(&to));
+ clockevents_config_and_register(&to.clkevt, timer_of_rate(&to),
+ 1, UINT_MAX);
+
+ return 0;
+}
+
+static struct timer_of suspend_to = {
+ .flags = TIMER_OF_BASE | TIMER_OF_CLOCK,
+};
+
+static u64 sprd_suspend_timer_read(struct clocksource *cs)
+{
+ return ~(u64)readl_relaxed(timer_of_base(&suspend_to) +
+ TIMER_VALUE_SHDW_LO) & cs->mask;
+}
+
+static int sprd_suspend_timer_enable(struct clocksource *cs)
+{
+ sprd_timer_update_counter(timer_of_base(&suspend_to),
+ TIMER_VALUE_LO_MASK);
+ sprd_timer_enable(timer_of_base(&suspend_to), TIMER_CTL_PERIOD_MODE);
+
+ return 0;
+}
+
+static void sprd_suspend_timer_disable(struct clocksource *cs)
+{
+ sprd_timer_disable(timer_of_base(&suspend_to));
+}
+
+static struct clocksource suspend_clocksource = {
+ .name = "sprd_suspend_timer",
+ .rating = 200,
+ .read = sprd_suspend_timer_read,
+ .enable = sprd_suspend_timer_enable,
+ .disable = sprd_suspend_timer_disable,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_SUSPEND_NONSTOP,
+};
+
+static int __init sprd_suspend_timer_init(struct device_node *np)
+{
+ int ret;
+
+ ret = timer_of_init(np, &suspend_to);
+ if (ret)
+ return ret;
+
+ clocksource_register_hz(&suspend_clocksource,
+ timer_of_rate(&suspend_to));
+
+ return 0;
+}
+
+TIMER_OF_DECLARE(sc9860_timer, "sprd,sc9860-timer", sprd_timer_init);
+TIMER_OF_DECLARE(sc9860_persistent_timer, "sprd,sc9860-suspend-timer",
+ sprd_suspend_timer_init);
diff --git a/drivers/clocksource/timer-stm32-lp.c b/drivers/clocksource/timer-stm32-lp.c
new file mode 100644
index 0000000000..a4c95161cb
--- /dev/null
+++ b/drivers/clocksource/timer-stm32-lp.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Authors: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
+ * Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/stm32-lptimer.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
+
+#define CFGR_PSC_OFFSET 9
+#define STM32_LP_RATING 1000
+#define STM32_TARGET_CLKRATE (32000 * HZ)
+#define STM32_LP_MAX_PSC 7
+
+struct stm32_lp_private {
+ struct regmap *reg;
+ struct clock_event_device clkevt;
+ unsigned long period;
+ struct device *dev;
+};
+
+static struct stm32_lp_private*
+to_priv(struct clock_event_device *clkevt)
+{
+ return container_of(clkevt, struct stm32_lp_private, clkevt);
+}
+
+static int stm32_clkevent_lp_shutdown(struct clock_event_device *clkevt)
+{
+ struct stm32_lp_private *priv = to_priv(clkevt);
+
+ regmap_write(priv->reg, STM32_LPTIM_CR, 0);
+ regmap_write(priv->reg, STM32_LPTIM_IER, 0);
+ /* clear pending flags */
+ regmap_write(priv->reg, STM32_LPTIM_ICR, STM32_LPTIM_ARRMCF);
+
+ return 0;
+}
+
+static int stm32_clkevent_lp_set_timer(unsigned long evt,
+ struct clock_event_device *clkevt,
+ int is_periodic)
+{
+ struct stm32_lp_private *priv = to_priv(clkevt);
+
+ /* disable LPTIMER to be able to write into IER register*/
+ regmap_write(priv->reg, STM32_LPTIM_CR, 0);
+ /* enable ARR interrupt */
+ regmap_write(priv->reg, STM32_LPTIM_IER, STM32_LPTIM_ARRMIE);
+ /* enable LPTIMER to be able to write into ARR register */
+ regmap_write(priv->reg, STM32_LPTIM_CR, STM32_LPTIM_ENABLE);
+ /* set next event counter */
+ regmap_write(priv->reg, STM32_LPTIM_ARR, evt);
+
+ /* start counter */
+ if (is_periodic)
+ regmap_write(priv->reg, STM32_LPTIM_CR,
+ STM32_LPTIM_CNTSTRT | STM32_LPTIM_ENABLE);
+ else
+ regmap_write(priv->reg, STM32_LPTIM_CR,
+ STM32_LPTIM_SNGSTRT | STM32_LPTIM_ENABLE);
+
+ return 0;
+}
+
+static int stm32_clkevent_lp_set_next_event(unsigned long evt,
+ struct clock_event_device *clkevt)
+{
+ return stm32_clkevent_lp_set_timer(evt, clkevt,
+ clockevent_state_periodic(clkevt));
+}
+
+static int stm32_clkevent_lp_set_periodic(struct clock_event_device *clkevt)
+{
+ struct stm32_lp_private *priv = to_priv(clkevt);
+
+ return stm32_clkevent_lp_set_timer(priv->period, clkevt, true);
+}
+
+static int stm32_clkevent_lp_set_oneshot(struct clock_event_device *clkevt)
+{
+ struct stm32_lp_private *priv = to_priv(clkevt);
+
+ return stm32_clkevent_lp_set_timer(priv->period, clkevt, false);
+}
+
+static irqreturn_t stm32_clkevent_lp_irq_handler(int irq, void *dev_id)
+{
+ struct clock_event_device *clkevt = (struct clock_event_device *)dev_id;
+ struct stm32_lp_private *priv = to_priv(clkevt);
+
+ regmap_write(priv->reg, STM32_LPTIM_ICR, STM32_LPTIM_ARRMCF);
+
+ if (clkevt->event_handler)
+ clkevt->event_handler(clkevt);
+
+ return IRQ_HANDLED;
+}
+
+static void stm32_clkevent_lp_set_prescaler(struct stm32_lp_private *priv,
+ unsigned long *rate)
+{
+ int i;
+
+ for (i = 0; i <= STM32_LP_MAX_PSC; i++) {
+ if (DIV_ROUND_CLOSEST(*rate, 1 << i) < STM32_TARGET_CLKRATE)
+ break;
+ }
+
+ regmap_write(priv->reg, STM32_LPTIM_CFGR, i << CFGR_PSC_OFFSET);
+
+ /* Adjust rate and period given the prescaler value */
+ *rate = DIV_ROUND_CLOSEST(*rate, (1 << i));
+ priv->period = DIV_ROUND_UP(*rate, HZ);
+}
+
+static void stm32_clkevent_lp_init(struct stm32_lp_private *priv,
+ struct device_node *np, unsigned long rate)
+{
+ priv->clkevt.name = np->full_name;
+ priv->clkevt.cpumask = cpu_possible_mask;
+ priv->clkevt.features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT;
+ priv->clkevt.set_state_shutdown = stm32_clkevent_lp_shutdown;
+ priv->clkevt.set_state_periodic = stm32_clkevent_lp_set_periodic;
+ priv->clkevt.set_state_oneshot = stm32_clkevent_lp_set_oneshot;
+ priv->clkevt.set_next_event = stm32_clkevent_lp_set_next_event;
+ priv->clkevt.rating = STM32_LP_RATING;
+
+ clockevents_config_and_register(&priv->clkevt, rate, 0x1,
+ STM32_LPTIM_MAX_ARR);
+}
+
+static int stm32_clkevent_lp_probe(struct platform_device *pdev)
+{
+ struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
+ struct stm32_lp_private *priv;
+ unsigned long rate;
+ int ret, irq;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->reg = ddata->regmap;
+ ret = clk_prepare_enable(ddata->clk);
+ if (ret)
+ return -EINVAL;
+
+ rate = clk_get_rate(ddata->clk);
+ if (!rate) {
+ ret = -EINVAL;
+ goto out_clk_disable;
+ }
+
+ irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
+ if (irq <= 0) {
+ ret = irq;
+ goto out_clk_disable;
+ }
+
+ if (of_property_read_bool(pdev->dev.parent->of_node, "wakeup-source")) {
+ ret = device_init_wakeup(&pdev->dev, true);
+ if (ret)
+ goto out_clk_disable;
+
+ ret = dev_pm_set_wake_irq(&pdev->dev, irq);
+ if (ret)
+ goto out_clk_disable;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq, stm32_clkevent_lp_irq_handler,
+ IRQF_TIMER, pdev->name, &priv->clkevt);
+ if (ret)
+ goto out_clk_disable;
+
+ stm32_clkevent_lp_set_prescaler(priv, &rate);
+
+ stm32_clkevent_lp_init(priv, pdev->dev.parent->of_node, rate);
+
+ priv->dev = &pdev->dev;
+
+ return 0;
+
+out_clk_disable:
+ clk_disable_unprepare(ddata->clk);
+ return ret;
+}
+
+static const struct of_device_id stm32_clkevent_lp_of_match[] = {
+ { .compatible = "st,stm32-lptimer-timer", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stm32_clkevent_lp_of_match);
+
+static struct platform_driver stm32_clkevent_lp_driver = {
+ .probe = stm32_clkevent_lp_probe,
+ .driver = {
+ .name = "stm32-lptimer-timer",
+ .of_match_table = stm32_clkevent_lp_of_match,
+ .suppress_bind_attrs = true,
+ },
+};
+module_platform_driver(stm32_clkevent_lp_driver);
+
+MODULE_ALIAS("platform:stm32-lptimer-timer");
+MODULE_DESCRIPTION("STMicroelectronics STM32 clockevent low power driver");
diff --git a/drivers/clocksource/timer-stm32.c b/drivers/clocksource/timer-stm32.c
new file mode 100644
index 0000000000..c9a753f96b
--- /dev/null
+++ b/drivers/clocksource/timer-stm32.c
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) Maxime Coquelin 2015
+ * Author: Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * Inspired by time-efm32.c from Uwe Kleine-Koenig
+ */
+
+#include <linux/kernel.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+#include "timer-of.h"
+
+#define TIM_CR1 0x00
+#define TIM_DIER 0x0c
+#define TIM_SR 0x10
+#define TIM_EGR 0x14
+#define TIM_CNT 0x24
+#define TIM_PSC 0x28
+#define TIM_ARR 0x2c
+#define TIM_CCR1 0x34
+
+#define TIM_CR1_CEN BIT(0)
+#define TIM_CR1_UDIS BIT(1)
+#define TIM_CR1_OPM BIT(3)
+#define TIM_CR1_ARPE BIT(7)
+
+#define TIM_DIER_UIE BIT(0)
+#define TIM_DIER_CC1IE BIT(1)
+
+#define TIM_SR_UIF BIT(0)
+
+#define TIM_EGR_UG BIT(0)
+
+#define TIM_PSC_MAX USHRT_MAX
+#define TIM_PSC_CLKRATE 10000
+
+struct stm32_timer_private {
+ int bits;
+};
+
+/**
+ * stm32_timer_of_bits_set - set accessor helper
+ * @to: a timer_of structure pointer
+ * @bits: the number of bits (16 or 32)
+ *
+ * Accessor helper to set the number of bits in the timer-of private
+ * structure.
+ *
+ */
+static void stm32_timer_of_bits_set(struct timer_of *to, int bits)
+{
+ struct stm32_timer_private *pd = to->private_data;
+
+ pd->bits = bits;
+}
+
+/**
+ * stm32_timer_of_bits_get - get accessor helper
+ * @to: a timer_of structure pointer
+ *
+ * Accessor helper to get the number of bits in the timer-of private
+ * structure.
+ *
+ * Returns an integer corresponding to the number of bits.
+ */
+static int stm32_timer_of_bits_get(struct timer_of *to)
+{
+ struct stm32_timer_private *pd = to->private_data;
+
+ return pd->bits;
+}
+
+static void __iomem *stm32_timer_cnt __read_mostly;
+
+static u64 notrace stm32_read_sched_clock(void)
+{
+ return readl_relaxed(stm32_timer_cnt);
+}
+
+static struct delay_timer stm32_timer_delay;
+
+static unsigned long stm32_read_delay(void)
+{
+ return readl_relaxed(stm32_timer_cnt);
+}
+
+static void stm32_clock_event_disable(struct timer_of *to)
+{
+ writel_relaxed(0, timer_of_base(to) + TIM_DIER);
+}
+
+/**
+ * stm32_timer_start - Start the counter without event
+ * @to: a timer_of structure pointer
+ *
+ * Start the timer in order to have the counter reset and start
+ * incrementing but disable interrupt event when there is a counter
+ * overflow. By default, the counter direction is used as upcounter.
+ */
+static void stm32_timer_start(struct timer_of *to)
+{
+ writel_relaxed(TIM_CR1_UDIS | TIM_CR1_CEN, timer_of_base(to) + TIM_CR1);
+}
+
+static int stm32_clock_event_shutdown(struct clock_event_device *clkevt)
+{
+ struct timer_of *to = to_timer_of(clkevt);
+
+ stm32_clock_event_disable(to);
+
+ return 0;
+}
+
+static int stm32_clock_event_set_next_event(unsigned long evt,
+ struct clock_event_device *clkevt)
+{
+ struct timer_of *to = to_timer_of(clkevt);
+ unsigned long now, next;
+
+ next = readl_relaxed(timer_of_base(to) + TIM_CNT) + evt;
+ writel_relaxed(next, timer_of_base(to) + TIM_CCR1);
+ now = readl_relaxed(timer_of_base(to) + TIM_CNT);
+
+ if ((next - now) > evt)
+ return -ETIME;
+
+ writel_relaxed(TIM_DIER_CC1IE, timer_of_base(to) + TIM_DIER);
+
+ return 0;
+}
+
+static int stm32_clock_event_set_periodic(struct clock_event_device *clkevt)
+{
+ struct timer_of *to = to_timer_of(clkevt);
+
+ stm32_timer_start(to);
+
+ return stm32_clock_event_set_next_event(timer_of_period(to), clkevt);
+}
+
+static int stm32_clock_event_set_oneshot(struct clock_event_device *clkevt)
+{
+ struct timer_of *to = to_timer_of(clkevt);
+
+ stm32_timer_start(to);
+
+ return 0;
+}
+
+static irqreturn_t stm32_clock_event_handler(int irq, void *dev_id)
+{
+ struct clock_event_device *clkevt = (struct clock_event_device *)dev_id;
+ struct timer_of *to = to_timer_of(clkevt);
+
+ writel_relaxed(0, timer_of_base(to) + TIM_SR);
+
+ if (clockevent_state_periodic(clkevt))
+ stm32_clock_event_set_periodic(clkevt);
+ else
+ stm32_clock_event_shutdown(clkevt);
+
+ clkevt->event_handler(clkevt);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * stm32_timer_width - Sort out the timer width (32/16)
+ * @to: a pointer to a timer-of structure
+ *
+ * Write the 32-bit max value and read/return the result. If the timer
+ * is 32 bits wide, the result will be UINT_MAX, otherwise it will
+ * be truncated by the 16-bit register to USHRT_MAX.
+ *
+ */
+static void __init stm32_timer_set_width(struct timer_of *to)
+{
+ u32 width;
+
+ writel_relaxed(UINT_MAX, timer_of_base(to) + TIM_ARR);
+
+ width = readl_relaxed(timer_of_base(to) + TIM_ARR);
+
+ stm32_timer_of_bits_set(to, width == UINT_MAX ? 32 : 16);
+}
+
+/**
+ * stm32_timer_set_prescaler - Compute and set the prescaler register
+ * @to: a pointer to a timer-of structure
+ *
+ * Depending on the timer width, compute the prescaler to always
+ * target a 10MHz timer rate for 16 bits. 32-bit timers are
+ * considered precise and long enough to not use the prescaler.
+ */
+static void __init stm32_timer_set_prescaler(struct timer_of *to)
+{
+ int prescaler = 1;
+
+ if (stm32_timer_of_bits_get(to) != 32) {
+ prescaler = DIV_ROUND_CLOSEST(timer_of_rate(to),
+ TIM_PSC_CLKRATE);
+ /*
+ * The prescaler register is an u16, the variable
+ * can't be greater than TIM_PSC_MAX, let's cap it in
+ * this case.
+ */
+ prescaler = prescaler < TIM_PSC_MAX ? prescaler : TIM_PSC_MAX;
+ }
+
+ writel_relaxed(prescaler - 1, timer_of_base(to) + TIM_PSC);
+ writel_relaxed(TIM_EGR_UG, timer_of_base(to) + TIM_EGR);
+ writel_relaxed(0, timer_of_base(to) + TIM_SR);
+
+ /* Adjust rate and period given the prescaler value */
+ to->of_clk.rate = DIV_ROUND_CLOSEST(to->of_clk.rate, prescaler);
+ to->of_clk.period = DIV_ROUND_UP(to->of_clk.rate, HZ);
+}
+
+static int __init stm32_clocksource_init(struct timer_of *to)
+{
+ u32 bits = stm32_timer_of_bits_get(to);
+ const char *name = to->np->full_name;
+
+ /*
+ * This driver allows to register several timers and relies on
+ * the generic time framework to select the right one.
+ * However, nothing allows to do the same for the
+ * sched_clock. We are not interested in a sched_clock for the
+ * 16-bit timers but only for the 32-bit one, so if no 32-bit
+ * timer is registered yet, we select this 32-bit timer as a
+ * sched_clock.
+ */
+ if (bits == 32 && !stm32_timer_cnt) {
+
+ /*
+ * Start immediately the counter as we will be using
+ * it right after.
+ */
+ stm32_timer_start(to);
+
+ stm32_timer_cnt = timer_of_base(to) + TIM_CNT;
+ sched_clock_register(stm32_read_sched_clock, bits, timer_of_rate(to));
+ pr_info("%s: STM32 sched_clock registered\n", name);
+
+ stm32_timer_delay.read_current_timer = stm32_read_delay;
+ stm32_timer_delay.freq = timer_of_rate(to);
+ register_current_timer_delay(&stm32_timer_delay);
+ pr_info("%s: STM32 delay timer registered\n", name);
+ }
+
+ return clocksource_mmio_init(timer_of_base(to) + TIM_CNT, name,
+ timer_of_rate(to), bits == 32 ? 250 : 100,
+ bits, clocksource_mmio_readl_up);
+}
+
+static void __init stm32_clockevent_init(struct timer_of *to)
+{
+ u32 bits = stm32_timer_of_bits_get(to);
+
+ to->clkevt.name = to->np->full_name;
+ to->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ to->clkevt.set_state_shutdown = stm32_clock_event_shutdown;
+ to->clkevt.set_state_periodic = stm32_clock_event_set_periodic;
+ to->clkevt.set_state_oneshot = stm32_clock_event_set_oneshot;
+ to->clkevt.tick_resume = stm32_clock_event_shutdown;
+ to->clkevt.set_next_event = stm32_clock_event_set_next_event;
+ to->clkevt.rating = bits == 32 ? 250 : 100;
+
+ clockevents_config_and_register(&to->clkevt, timer_of_rate(to), 0x1,
+ (1 << bits) - 1);
+
+ pr_info("%pOF: STM32 clockevent driver initialized (%d bits)\n",
+ to->np, bits);
+}
+
+static int __init stm32_timer_init(struct device_node *node)
+{
+ struct reset_control *rstc;
+ struct timer_of *to;
+ int ret;
+
+ to = kzalloc(sizeof(*to), GFP_KERNEL);
+ if (!to)
+ return -ENOMEM;
+
+ to->flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE;
+ to->of_irq.handler = stm32_clock_event_handler;
+
+ ret = timer_of_init(node, to);
+ if (ret)
+ goto err;
+
+ to->private_data = kzalloc(sizeof(struct stm32_timer_private),
+ GFP_KERNEL);
+ if (!to->private_data) {
+ ret = -ENOMEM;
+ goto deinit;
+ }
+
+ rstc = of_reset_control_get(node, NULL);
+ if (!IS_ERR(rstc)) {
+ reset_control_assert(rstc);
+ reset_control_deassert(rstc);
+ }
+
+ stm32_timer_set_width(to);
+
+ stm32_timer_set_prescaler(to);
+
+ ret = stm32_clocksource_init(to);
+ if (ret)
+ goto deinit;
+
+ stm32_clockevent_init(to);
+ return 0;
+
+deinit:
+ timer_of_cleanup(to);
+err:
+ kfree(to);
+ return ret;
+}
+
+TIMER_OF_DECLARE(stm32, "st,stm32-timer", stm32_timer_init);
diff --git a/drivers/clocksource/timer-sun4i.c b/drivers/clocksource/timer-sun4i.c
new file mode 100644
index 0000000000..7bdcc60ad4
--- /dev/null
+++ b/drivers/clocksource/timer-sun4i.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Allwinner A1X SoCs timer handling.
+ *
+ * Copyright (C) 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Benn Huang <benn@allwinnertech.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/sched_clock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include "timer-of.h"
+
+#define TIMER_IRQ_EN_REG 0x00
+#define TIMER_IRQ_EN(val) BIT(val)
+#define TIMER_IRQ_ST_REG 0x04
+#define TIMER_IRQ_CLEAR(val) BIT(val)
+#define TIMER_CTL_REG(val) (0x10 * val + 0x10)
+#define TIMER_CTL_ENABLE BIT(0)
+#define TIMER_CTL_RELOAD BIT(1)
+#define TIMER_CTL_CLK_SRC(val) (((val) & 0x3) << 2)
+#define TIMER_CTL_CLK_SRC_OSC24M (1)
+#define TIMER_CTL_CLK_PRES(val) (((val) & 0x7) << 4)
+#define TIMER_CTL_ONESHOT BIT(7)
+#define TIMER_INTVAL_REG(val) (0x10 * (val) + 0x14)
+#define TIMER_CNTVAL_REG(val) (0x10 * (val) + 0x18)
+
+#define TIMER_SYNC_TICKS 3
+
+/*
+ * When we disable a timer, we need to wait at least for 2 cycles of
+ * the timer source clock. We will use for that the clocksource timer
+ * that is already setup and runs at the same frequency than the other
+ * timers, and we never will be disabled.
+ */
+static void sun4i_clkevt_sync(void __iomem *base)
+{
+ u32 old = readl(base + TIMER_CNTVAL_REG(1));
+
+ while ((old - readl(base + TIMER_CNTVAL_REG(1))) < TIMER_SYNC_TICKS)
+ cpu_relax();
+}
+
+static void sun4i_clkevt_time_stop(void __iomem *base, u8 timer)
+{
+ u32 val = readl(base + TIMER_CTL_REG(timer));
+ writel(val & ~TIMER_CTL_ENABLE, base + TIMER_CTL_REG(timer));
+ sun4i_clkevt_sync(base);
+}
+
+static void sun4i_clkevt_time_setup(void __iomem *base, u8 timer,
+ unsigned long delay)
+{
+ writel(delay, base + TIMER_INTVAL_REG(timer));
+}
+
+static void sun4i_clkevt_time_start(void __iomem *base, u8 timer,
+ bool periodic)
+{
+ u32 val = readl(base + TIMER_CTL_REG(timer));
+
+ if (periodic)
+ val &= ~TIMER_CTL_ONESHOT;
+ else
+ val |= TIMER_CTL_ONESHOT;
+
+ writel(val | TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
+ base + TIMER_CTL_REG(timer));
+}
+
+static int sun4i_clkevt_shutdown(struct clock_event_device *evt)
+{
+ struct timer_of *to = to_timer_of(evt);
+
+ sun4i_clkevt_time_stop(timer_of_base(to), 0);
+
+ return 0;
+}
+
+static int sun4i_clkevt_set_oneshot(struct clock_event_device *evt)
+{
+ struct timer_of *to = to_timer_of(evt);
+
+ sun4i_clkevt_time_stop(timer_of_base(to), 0);
+ sun4i_clkevt_time_start(timer_of_base(to), 0, false);
+
+ return 0;
+}
+
+static int sun4i_clkevt_set_periodic(struct clock_event_device *evt)
+{
+ struct timer_of *to = to_timer_of(evt);
+
+ sun4i_clkevt_time_stop(timer_of_base(to), 0);
+ sun4i_clkevt_time_setup(timer_of_base(to), 0, timer_of_period(to));
+ sun4i_clkevt_time_start(timer_of_base(to), 0, true);
+
+ return 0;
+}
+
+static int sun4i_clkevt_next_event(unsigned long evt,
+ struct clock_event_device *clkevt)
+{
+ struct timer_of *to = to_timer_of(clkevt);
+
+ sun4i_clkevt_time_stop(timer_of_base(to), 0);
+ sun4i_clkevt_time_setup(timer_of_base(to), 0, evt - TIMER_SYNC_TICKS);
+ sun4i_clkevt_time_start(timer_of_base(to), 0, false);
+
+ return 0;
+}
+
+static void sun4i_timer_clear_interrupt(void __iomem *base)
+{
+ writel(TIMER_IRQ_CLEAR(0), base + TIMER_IRQ_ST_REG);
+}
+
+static irqreturn_t sun4i_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ struct timer_of *to = to_timer_of(evt);
+
+ sun4i_timer_clear_interrupt(timer_of_base(to));
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct timer_of to = {
+ .flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE,
+
+ .clkevt = {
+ .name = "sun4i_tick",
+ .rating = 350,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_DYNIRQ,
+ .set_state_shutdown = sun4i_clkevt_shutdown,
+ .set_state_periodic = sun4i_clkevt_set_periodic,
+ .set_state_oneshot = sun4i_clkevt_set_oneshot,
+ .tick_resume = sun4i_clkevt_shutdown,
+ .set_next_event = sun4i_clkevt_next_event,
+ .cpumask = cpu_possible_mask,
+ },
+
+ .of_irq = {
+ .handler = sun4i_timer_interrupt,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ },
+};
+
+static u64 notrace sun4i_timer_sched_read(void)
+{
+ return ~readl(timer_of_base(&to) + TIMER_CNTVAL_REG(1));
+}
+
+static int __init sun4i_timer_init(struct device_node *node)
+{
+ int ret;
+ u32 val;
+
+ ret = timer_of_init(node, &to);
+ if (ret)
+ return ret;
+
+ writel(~0, timer_of_base(&to) + TIMER_INTVAL_REG(1));
+ writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD |
+ TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M),
+ timer_of_base(&to) + TIMER_CTL_REG(1));
+
+ /*
+ * sched_clock_register does not have priorities, and on sun6i and
+ * later there is a better sched_clock registered by arm_arch_timer.c
+ */
+ if (of_machine_is_compatible("allwinner,sun4i-a10") ||
+ of_machine_is_compatible("allwinner,sun5i-a13") ||
+ of_machine_is_compatible("allwinner,sun5i-a10s") ||
+ of_machine_is_compatible("allwinner,suniv-f1c100s"))
+ sched_clock_register(sun4i_timer_sched_read, 32,
+ timer_of_rate(&to));
+
+ ret = clocksource_mmio_init(timer_of_base(&to) + TIMER_CNTVAL_REG(1),
+ node->name, timer_of_rate(&to), 350, 32,
+ clocksource_mmio_readl_down);
+ if (ret) {
+ pr_err("Failed to register clocksource\n");
+ return ret;
+ }
+
+ writel(TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M),
+ timer_of_base(&to) + TIMER_CTL_REG(0));
+
+ /* Make sure timer is stopped before playing with interrupts */
+ sun4i_clkevt_time_stop(timer_of_base(&to), 0);
+
+ /* clear timer0 interrupt */
+ sun4i_timer_clear_interrupt(timer_of_base(&to));
+
+ clockevents_config_and_register(&to.clkevt, timer_of_rate(&to),
+ TIMER_SYNC_TICKS, 0xffffffff);
+
+ /* Enable timer0 interrupt */
+ val = readl(timer_of_base(&to) + TIMER_IRQ_EN_REG);
+ writel(val | TIMER_IRQ_EN(0), timer_of_base(&to) + TIMER_IRQ_EN_REG);
+
+ return ret;
+}
+TIMER_OF_DECLARE(sun4i, "allwinner,sun4i-a10-timer",
+ sun4i_timer_init);
+TIMER_OF_DECLARE(sun8i_a23, "allwinner,sun8i-a23-timer",
+ sun4i_timer_init);
+TIMER_OF_DECLARE(sun8i_v3s, "allwinner,sun8i-v3s-timer",
+ sun4i_timer_init);
+TIMER_OF_DECLARE(suniv, "allwinner,suniv-f1c100s-timer",
+ sun4i_timer_init);
diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c
new file mode 100644
index 0000000000..69fee3540d
--- /dev/null
+++ b/drivers/clocksource/timer-sun5i.c
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Allwinner SoCs hstimer driver.
+ *
+ * Copyright (C) 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#define TIMER_IRQ_EN_REG 0x00
+#define TIMER_IRQ_EN(val) BIT(val)
+#define TIMER_IRQ_ST_REG 0x04
+#define TIMER_CTL_REG(val) (0x20 * (val) + 0x10)
+#define TIMER_CTL_ENABLE BIT(0)
+#define TIMER_CTL_RELOAD BIT(1)
+#define TIMER_CTL_CLK_PRES(val) (((val) & 0x7) << 4)
+#define TIMER_CTL_ONESHOT BIT(7)
+#define TIMER_INTVAL_LO_REG(val) (0x20 * (val) + 0x14)
+#define TIMER_INTVAL_HI_REG(val) (0x20 * (val) + 0x18)
+#define TIMER_CNTVAL_LO_REG(val) (0x20 * (val) + 0x1c)
+#define TIMER_CNTVAL_HI_REG(val) (0x20 * (val) + 0x20)
+
+#define TIMER_SYNC_TICKS 3
+
+struct sun5i_timer {
+ void __iomem *base;
+ struct clk *clk;
+ struct notifier_block clk_rate_cb;
+ u32 ticks_per_jiffy;
+ struct clocksource clksrc;
+ struct clock_event_device clkevt;
+};
+
+#define nb_to_sun5i_timer(x) \
+ container_of(x, struct sun5i_timer, clk_rate_cb)
+#define clksrc_to_sun5i_timer(x) \
+ container_of(x, struct sun5i_timer, clksrc)
+#define clkevt_to_sun5i_timer(x) \
+ container_of(x, struct sun5i_timer, clkevt)
+
+/*
+ * When we disable a timer, we need to wait at least for 2 cycles of
+ * the timer source clock. We will use for that the clocksource timer
+ * that is already setup and runs at the same frequency than the other
+ * timers, and we never will be disabled.
+ */
+static void sun5i_clkevt_sync(struct sun5i_timer *ce)
+{
+ u32 old = readl(ce->base + TIMER_CNTVAL_LO_REG(1));
+
+ while ((old - readl(ce->base + TIMER_CNTVAL_LO_REG(1))) < TIMER_SYNC_TICKS)
+ cpu_relax();
+}
+
+static void sun5i_clkevt_time_stop(struct sun5i_timer *ce, u8 timer)
+{
+ u32 val = readl(ce->base + TIMER_CTL_REG(timer));
+ writel(val & ~TIMER_CTL_ENABLE, ce->base + TIMER_CTL_REG(timer));
+
+ sun5i_clkevt_sync(ce);
+}
+
+static void sun5i_clkevt_time_setup(struct sun5i_timer *ce, u8 timer, u32 delay)
+{
+ writel(delay, ce->base + TIMER_INTVAL_LO_REG(timer));
+}
+
+static void sun5i_clkevt_time_start(struct sun5i_timer *ce, u8 timer, bool periodic)
+{
+ u32 val = readl(ce->base + TIMER_CTL_REG(timer));
+
+ if (periodic)
+ val &= ~TIMER_CTL_ONESHOT;
+ else
+ val |= TIMER_CTL_ONESHOT;
+
+ writel(val | TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
+ ce->base + TIMER_CTL_REG(timer));
+}
+
+static int sun5i_clkevt_shutdown(struct clock_event_device *clkevt)
+{
+ struct sun5i_timer *ce = clkevt_to_sun5i_timer(clkevt);
+
+ sun5i_clkevt_time_stop(ce, 0);
+ return 0;
+}
+
+static int sun5i_clkevt_set_oneshot(struct clock_event_device *clkevt)
+{
+ struct sun5i_timer *ce = clkevt_to_sun5i_timer(clkevt);
+
+ sun5i_clkevt_time_stop(ce, 0);
+ sun5i_clkevt_time_start(ce, 0, false);
+ return 0;
+}
+
+static int sun5i_clkevt_set_periodic(struct clock_event_device *clkevt)
+{
+ struct sun5i_timer *ce = clkevt_to_sun5i_timer(clkevt);
+
+ sun5i_clkevt_time_stop(ce, 0);
+ sun5i_clkevt_time_setup(ce, 0, ce->ticks_per_jiffy);
+ sun5i_clkevt_time_start(ce, 0, true);
+ return 0;
+}
+
+static int sun5i_clkevt_next_event(unsigned long evt,
+ struct clock_event_device *clkevt)
+{
+ struct sun5i_timer *ce = clkevt_to_sun5i_timer(clkevt);
+
+ sun5i_clkevt_time_stop(ce, 0);
+ sun5i_clkevt_time_setup(ce, 0, evt - TIMER_SYNC_TICKS);
+ sun5i_clkevt_time_start(ce, 0, false);
+
+ return 0;
+}
+
+static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id)
+{
+ struct sun5i_timer *ce = dev_id;
+
+ writel(0x1, ce->base + TIMER_IRQ_ST_REG);
+ ce->clkevt.event_handler(&ce->clkevt);
+
+ return IRQ_HANDLED;
+}
+
+static u64 sun5i_clksrc_read(struct clocksource *clksrc)
+{
+ struct sun5i_timer *cs = clksrc_to_sun5i_timer(clksrc);
+
+ return ~readl(cs->base + TIMER_CNTVAL_LO_REG(1));
+}
+
+static int sun5i_rate_cb(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct clk_notifier_data *ndata = data;
+ struct sun5i_timer *cs = nb_to_sun5i_timer(nb);
+
+ switch (event) {
+ case PRE_RATE_CHANGE:
+ clocksource_unregister(&cs->clksrc);
+ break;
+
+ case POST_RATE_CHANGE:
+ clocksource_register_hz(&cs->clksrc, ndata->new_rate);
+ clockevents_update_freq(&cs->clkevt, ndata->new_rate);
+ cs->ticks_per_jiffy = DIV_ROUND_UP(ndata->new_rate, HZ);
+ break;
+
+ default:
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static int sun5i_setup_clocksource(struct platform_device *pdev,
+ unsigned long rate)
+{
+ struct sun5i_timer *cs = platform_get_drvdata(pdev);
+ void __iomem *base = cs->base;
+ int ret;
+
+ writel(~0, base + TIMER_INTVAL_LO_REG(1));
+ writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
+ base + TIMER_CTL_REG(1));
+
+ cs->clksrc.name = pdev->dev.of_node->name;
+ cs->clksrc.rating = 340;
+ cs->clksrc.read = sun5i_clksrc_read;
+ cs->clksrc.mask = CLOCKSOURCE_MASK(32);
+ cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ ret = clocksource_register_hz(&cs->clksrc, rate);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't register clock source.\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sun5i_setup_clockevent(struct platform_device *pdev,
+ unsigned long rate, int irq)
+{
+ struct device *dev = &pdev->dev;
+ struct sun5i_timer *ce = platform_get_drvdata(pdev);
+ void __iomem *base = ce->base;
+ int ret;
+ u32 val;
+
+ ce->clkevt.name = dev->of_node->name;
+ ce->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ ce->clkevt.set_next_event = sun5i_clkevt_next_event;
+ ce->clkevt.set_state_shutdown = sun5i_clkevt_shutdown;
+ ce->clkevt.set_state_periodic = sun5i_clkevt_set_periodic;
+ ce->clkevt.set_state_oneshot = sun5i_clkevt_set_oneshot;
+ ce->clkevt.tick_resume = sun5i_clkevt_shutdown;
+ ce->clkevt.rating = 340;
+ ce->clkevt.irq = irq;
+ ce->clkevt.cpumask = cpu_possible_mask;
+
+ /* Enable timer0 interrupt */
+ val = readl(base + TIMER_IRQ_EN_REG);
+ writel(val | TIMER_IRQ_EN(0), base + TIMER_IRQ_EN_REG);
+
+ clockevents_config_and_register(&ce->clkevt, rate,
+ TIMER_SYNC_TICKS, 0xffffffff);
+
+ ret = devm_request_irq(dev, irq, sun5i_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL,
+ "sun5i_timer0", ce);
+ if (ret) {
+ dev_err(dev, "Unable to register interrupt\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sun5i_timer_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sun5i_timer *st;
+ struct reset_control *rstc;
+ void __iomem *timer_base;
+ struct clk *clk;
+ unsigned long rate;
+ int irq, ret;
+
+ st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
+ if (!st)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, st);
+
+ timer_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(timer_base)) {
+ dev_err(dev, "Can't map registers\n");
+ return PTR_ERR(timer_base);
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "Can't get IRQ\n");
+ return irq;
+ }
+
+ clk = devm_clk_get_enabled(dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(dev, "Can't get timer clock\n");
+ return PTR_ERR(clk);
+ }
+
+ rate = clk_get_rate(clk);
+ if (!rate) {
+ dev_err(dev, "Couldn't get parent clock rate\n");
+ return -EINVAL;
+ }
+
+ st->base = timer_base;
+ st->ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
+ st->clk = clk;
+ st->clk_rate_cb.notifier_call = sun5i_rate_cb;
+ st->clk_rate_cb.next = NULL;
+
+ ret = devm_clk_notifier_register(dev, clk, &st->clk_rate_cb);
+ if (ret) {
+ dev_err(dev, "Unable to register clock notifier.\n");
+ return ret;
+ }
+
+ rstc = devm_reset_control_get_optional_exclusive(dev, NULL);
+ if (rstc)
+ reset_control_deassert(rstc);
+
+ ret = sun5i_setup_clocksource(pdev, rate);
+ if (ret)
+ return ret;
+
+ ret = sun5i_setup_clockevent(pdev, rate, irq);
+ if (ret)
+ goto err_unreg_clocksource;
+
+ return 0;
+
+err_unreg_clocksource:
+ clocksource_unregister(&st->clksrc);
+ return ret;
+}
+
+static void sun5i_timer_remove(struct platform_device *pdev)
+{
+ struct sun5i_timer *st = platform_get_drvdata(pdev);
+
+ clocksource_unregister(&st->clksrc);
+}
+
+static const struct of_device_id sun5i_timer_of_match[] = {
+ { .compatible = "allwinner,sun5i-a13-hstimer" },
+ { .compatible = "allwinner,sun7i-a20-hstimer" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sun5i_timer_of_match);
+
+static struct platform_driver sun5i_timer_driver = {
+ .probe = sun5i_timer_probe,
+ .remove_new = sun5i_timer_remove,
+ .driver = {
+ .name = "sun5i-timer",
+ .of_match_table = sun5i_timer_of_match,
+ .suppress_bind_attrs = true,
+ },
+};
+module_platform_driver(sun5i_timer_driver);
diff --git a/drivers/clocksource/timer-tegra.c b/drivers/clocksource/timer-tegra.c
new file mode 100644
index 0000000000..e9635c25ee
--- /dev/null
+++ b/drivers/clocksource/timer-tegra.c
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ * Colin Cross <ccross@google.com>
+ */
+
+#define pr_fmt(fmt) "tegra-timer: " fmt
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/percpu.h>
+#include <linux/sched_clock.h>
+#include <linux/time.h>
+
+#include "timer-of.h"
+
+#define RTC_SECONDS 0x08
+#define RTC_SHADOW_SECONDS 0x0c
+#define RTC_MILLISECONDS 0x10
+
+#define TIMERUS_CNTR_1US 0x10
+#define TIMERUS_USEC_CFG 0x14
+#define TIMERUS_CNTR_FREEZE 0x4c
+
+#define TIMER_PTV 0x0
+#define TIMER_PTV_EN BIT(31)
+#define TIMER_PTV_PER BIT(30)
+#define TIMER_PCR 0x4
+#define TIMER_PCR_INTR_CLR BIT(30)
+
+#define TIMER1_BASE 0x00
+#define TIMER2_BASE 0x08
+#define TIMER3_BASE 0x50
+#define TIMER4_BASE 0x58
+#define TIMER10_BASE 0x90
+
+#define TIMER1_IRQ_IDX 0
+#define TIMER10_IRQ_IDX 10
+
+#define TIMER_1MHz 1000000
+
+static u32 usec_config;
+static void __iomem *timer_reg_base;
+
+static int tegra_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ void __iomem *reg_base = timer_of_base(to_timer_of(evt));
+
+ /*
+ * Tegra's timer uses n+1 scheme for the counter, i.e. timer will
+ * fire after one tick if 0 is loaded.
+ *
+ * The minimum and maximum numbers of oneshot ticks are defined
+ * by clockevents_config_and_register(1, 0x1fffffff + 1) invocation
+ * below in the code. Hence the cycles (ticks) can't be outside of
+ * a range supportable by hardware.
+ */
+ writel_relaxed(TIMER_PTV_EN | (cycles - 1), reg_base + TIMER_PTV);
+
+ return 0;
+}
+
+static int tegra_timer_shutdown(struct clock_event_device *evt)
+{
+ void __iomem *reg_base = timer_of_base(to_timer_of(evt));
+
+ writel_relaxed(0, reg_base + TIMER_PTV);
+
+ return 0;
+}
+
+static int tegra_timer_set_periodic(struct clock_event_device *evt)
+{
+ void __iomem *reg_base = timer_of_base(to_timer_of(evt));
+ unsigned long period = timer_of_period(to_timer_of(evt));
+
+ writel_relaxed(TIMER_PTV_EN | TIMER_PTV_PER | (period - 1),
+ reg_base + TIMER_PTV);
+
+ return 0;
+}
+
+static irqreturn_t tegra_timer_isr(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ void __iomem *reg_base = timer_of_base(to_timer_of(evt));
+
+ writel_relaxed(TIMER_PCR_INTR_CLR, reg_base + TIMER_PCR);
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static void tegra_timer_suspend(struct clock_event_device *evt)
+{
+ void __iomem *reg_base = timer_of_base(to_timer_of(evt));
+
+ writel_relaxed(TIMER_PCR_INTR_CLR, reg_base + TIMER_PCR);
+}
+
+static void tegra_timer_resume(struct clock_event_device *evt)
+{
+ writel_relaxed(usec_config, timer_reg_base + TIMERUS_USEC_CFG);
+}
+
+static DEFINE_PER_CPU(struct timer_of, tegra_to) = {
+ .flags = TIMER_OF_CLOCK | TIMER_OF_BASE,
+
+ .clkevt = {
+ .name = "tegra_timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+ .set_next_event = tegra_timer_set_next_event,
+ .set_state_shutdown = tegra_timer_shutdown,
+ .set_state_periodic = tegra_timer_set_periodic,
+ .set_state_oneshot = tegra_timer_shutdown,
+ .tick_resume = tegra_timer_shutdown,
+ .suspend = tegra_timer_suspend,
+ .resume = tegra_timer_resume,
+ },
+};
+
+static int tegra_timer_setup(unsigned int cpu)
+{
+ struct timer_of *to = per_cpu_ptr(&tegra_to, cpu);
+
+ writel_relaxed(0, timer_of_base(to) + TIMER_PTV);
+ writel_relaxed(TIMER_PCR_INTR_CLR, timer_of_base(to) + TIMER_PCR);
+
+ irq_force_affinity(to->clkevt.irq, cpumask_of(cpu));
+ enable_irq(to->clkevt.irq);
+
+ /*
+ * Tegra's timer uses n+1 scheme for the counter, i.e. timer will
+ * fire after one tick if 0 is loaded and thus minimum number of
+ * ticks is 1. In result both of the clocksource's tick limits are
+ * higher than a minimum and maximum that hardware register can
+ * take by 1, this is then taken into account by set_next_event
+ * callback.
+ */
+ clockevents_config_and_register(&to->clkevt, timer_of_rate(to),
+ 1, /* min */
+ 0x1fffffff + 1); /* max 29 bits + 1 */
+
+ return 0;
+}
+
+static int tegra_timer_stop(unsigned int cpu)
+{
+ struct timer_of *to = per_cpu_ptr(&tegra_to, cpu);
+
+ to->clkevt.set_state_shutdown(&to->clkevt);
+ disable_irq_nosync(to->clkevt.irq);
+
+ return 0;
+}
+
+static u64 notrace tegra_read_sched_clock(void)
+{
+ return readl_relaxed(timer_reg_base + TIMERUS_CNTR_1US);
+}
+
+#ifdef CONFIG_ARM
+static unsigned long tegra_delay_timer_read_counter_long(void)
+{
+ return readl_relaxed(timer_reg_base + TIMERUS_CNTR_1US);
+}
+
+static struct delay_timer tegra_delay_timer = {
+ .read_current_timer = tegra_delay_timer_read_counter_long,
+ .freq = TIMER_1MHz,
+};
+#endif
+
+static struct timer_of suspend_rtc_to = {
+ .flags = TIMER_OF_BASE | TIMER_OF_CLOCK,
+};
+
+/*
+ * tegra_rtc_read - Reads the Tegra RTC registers
+ * Care must be taken that this function is not called while the
+ * tegra_rtc driver could be executing to avoid race conditions
+ * on the RTC shadow register
+ */
+static u64 tegra_rtc_read_ms(struct clocksource *cs)
+{
+ void __iomem *reg_base = timer_of_base(&suspend_rtc_to);
+
+ u32 ms = readl_relaxed(reg_base + RTC_MILLISECONDS);
+ u32 s = readl_relaxed(reg_base + RTC_SHADOW_SECONDS);
+
+ return (u64)s * MSEC_PER_SEC + ms;
+}
+
+static struct clocksource suspend_rtc_clocksource = {
+ .name = "tegra_suspend_timer",
+ .rating = 200,
+ .read = tegra_rtc_read_ms,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_SUSPEND_NONSTOP,
+};
+
+static inline unsigned int tegra_base_for_cpu(int cpu, bool tegra20)
+{
+ if (tegra20) {
+ switch (cpu) {
+ case 0:
+ return TIMER1_BASE;
+ case 1:
+ return TIMER2_BASE;
+ case 2:
+ return TIMER3_BASE;
+ default:
+ return TIMER4_BASE;
+ }
+ }
+
+ return TIMER10_BASE + cpu * 8;
+}
+
+static inline unsigned int tegra_irq_idx_for_cpu(int cpu, bool tegra20)
+{
+ if (tegra20)
+ return TIMER1_IRQ_IDX + cpu;
+
+ return TIMER10_IRQ_IDX + cpu;
+}
+
+static inline unsigned long tegra_rate_for_timer(struct timer_of *to,
+ bool tegra20)
+{
+ /*
+ * TIMER1-9 are fixed to 1MHz, TIMER10-13 are running off the
+ * parent clock.
+ */
+ if (tegra20)
+ return TIMER_1MHz;
+
+ return timer_of_rate(to);
+}
+
+static int __init tegra_init_timer(struct device_node *np, bool tegra20,
+ int rating)
+{
+ struct timer_of *to;
+ int cpu, ret;
+
+ to = this_cpu_ptr(&tegra_to);
+ ret = timer_of_init(np, to);
+ if (ret)
+ goto out;
+
+ timer_reg_base = timer_of_base(to);
+
+ /*
+ * Configure microsecond timers to have 1MHz clock
+ * Config register is 0xqqww, where qq is "dividend", ww is "divisor"
+ * Uses n+1 scheme
+ */
+ switch (timer_of_rate(to)) {
+ case 12000000:
+ usec_config = 0x000b; /* (11+1)/(0+1) */
+ break;
+ case 12800000:
+ usec_config = 0x043f; /* (63+1)/(4+1) */
+ break;
+ case 13000000:
+ usec_config = 0x000c; /* (12+1)/(0+1) */
+ break;
+ case 16800000:
+ usec_config = 0x0453; /* (83+1)/(4+1) */
+ break;
+ case 19200000:
+ usec_config = 0x045f; /* (95+1)/(4+1) */
+ break;
+ case 26000000:
+ usec_config = 0x0019; /* (25+1)/(0+1) */
+ break;
+ case 38400000:
+ usec_config = 0x04bf; /* (191+1)/(4+1) */
+ break;
+ case 48000000:
+ usec_config = 0x002f; /* (47+1)/(0+1) */
+ break;
+ default:
+ ret = -EINVAL;
+ goto out;
+ }
+
+ writel_relaxed(usec_config, timer_reg_base + TIMERUS_USEC_CFG);
+
+ for_each_possible_cpu(cpu) {
+ struct timer_of *cpu_to = per_cpu_ptr(&tegra_to, cpu);
+ unsigned long flags = IRQF_TIMER | IRQF_NOBALANCING;
+ unsigned long rate = tegra_rate_for_timer(to, tegra20);
+ unsigned int base = tegra_base_for_cpu(cpu, tegra20);
+ unsigned int idx = tegra_irq_idx_for_cpu(cpu, tegra20);
+ unsigned int irq = irq_of_parse_and_map(np, idx);
+
+ if (!irq) {
+ pr_err("failed to map irq for cpu%d\n", cpu);
+ ret = -EINVAL;
+ goto out_irq;
+ }
+
+ cpu_to->clkevt.irq = irq;
+ cpu_to->clkevt.rating = rating;
+ cpu_to->clkevt.cpumask = cpumask_of(cpu);
+ cpu_to->of_base.base = timer_reg_base + base;
+ cpu_to->of_clk.period = rate / HZ;
+ cpu_to->of_clk.rate = rate;
+
+ irq_set_status_flags(cpu_to->clkevt.irq, IRQ_NOAUTOEN);
+
+ ret = request_irq(cpu_to->clkevt.irq, tegra_timer_isr, flags,
+ cpu_to->clkevt.name, &cpu_to->clkevt);
+ if (ret) {
+ pr_err("failed to set up irq for cpu%d: %d\n",
+ cpu, ret);
+ irq_dispose_mapping(cpu_to->clkevt.irq);
+ cpu_to->clkevt.irq = 0;
+ goto out_irq;
+ }
+ }
+
+ sched_clock_register(tegra_read_sched_clock, 32, TIMER_1MHz);
+
+ ret = clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
+ "timer_us", TIMER_1MHz, 300, 32,
+ clocksource_mmio_readl_up);
+ if (ret)
+ pr_err("failed to register clocksource: %d\n", ret);
+
+#ifdef CONFIG_ARM
+ register_current_timer_delay(&tegra_delay_timer);
+#endif
+
+ ret = cpuhp_setup_state(CPUHP_AP_TEGRA_TIMER_STARTING,
+ "AP_TEGRA_TIMER_STARTING", tegra_timer_setup,
+ tegra_timer_stop);
+ if (ret)
+ pr_err("failed to set up cpu hp state: %d\n", ret);
+
+ return ret;
+
+out_irq:
+ for_each_possible_cpu(cpu) {
+ struct timer_of *cpu_to;
+
+ cpu_to = per_cpu_ptr(&tegra_to, cpu);
+ if (cpu_to->clkevt.irq) {
+ free_irq(cpu_to->clkevt.irq, &cpu_to->clkevt);
+ irq_dispose_mapping(cpu_to->clkevt.irq);
+ }
+ }
+
+ to->of_base.base = timer_reg_base;
+out:
+ timer_of_cleanup(to);
+
+ return ret;
+}
+
+static int __init tegra210_init_timer(struct device_node *np)
+{
+ /*
+ * Arch-timer can't survive across power cycle of CPU core and
+ * after CPUPORESET signal due to a system design shortcoming,
+ * hence tegra-timer is more preferable on Tegra210.
+ */
+ return tegra_init_timer(np, false, 460);
+}
+TIMER_OF_DECLARE(tegra210_timer, "nvidia,tegra210-timer", tegra210_init_timer);
+
+static int __init tegra20_init_timer(struct device_node *np)
+{
+ int rating;
+
+ /*
+ * Tegra20 and Tegra30 have Cortex A9 CPU that has a TWD timer,
+ * that timer runs off the CPU clock and hence is subjected to
+ * a jitter caused by DVFS clock rate changes. Tegra-timer is
+ * more preferable for older Tegra's, while later SoC generations
+ * have arch-timer as a main per-CPU timer and it is not affected
+ * by DVFS changes.
+ */
+ if (of_machine_is_compatible("nvidia,tegra20") ||
+ of_machine_is_compatible("nvidia,tegra30"))
+ rating = 460;
+ else
+ rating = 330;
+
+ return tegra_init_timer(np, true, rating);
+}
+TIMER_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer);
+
+static int __init tegra20_init_rtc(struct device_node *np)
+{
+ int ret;
+
+ ret = timer_of_init(np, &suspend_rtc_to);
+ if (ret)
+ return ret;
+
+ return clocksource_register_hz(&suspend_rtc_clocksource, 1000);
+}
+TIMER_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
diff --git a/drivers/clocksource/timer-tegra186.c b/drivers/clocksource/timer-tegra186.c
new file mode 100644
index 0000000000..304537dadf
--- /dev/null
+++ b/drivers/clocksource/timer-tegra186.c
@@ -0,0 +1,510 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2019-2020 NVIDIA Corporation. All rights reserved.
+ */
+
+#include <linux/clocksource.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/watchdog.h>
+
+/* shared registers */
+#define TKETSC0 0x000
+#define TKETSC1 0x004
+#define TKEUSEC 0x008
+#define TKEOSC 0x00c
+
+#define TKEIE(x) (0x100 + ((x) * 4))
+#define TKEIE_WDT_MASK(x, y) ((y) << (16 + 4 * (x)))
+
+/* timer registers */
+#define TMRCR 0x000
+#define TMRCR_ENABLE BIT(31)
+#define TMRCR_PERIODIC BIT(30)
+#define TMRCR_PTV(x) ((x) & 0x0fffffff)
+
+#define TMRSR 0x004
+#define TMRSR_INTR_CLR BIT(30)
+
+#define TMRCSSR 0x008
+#define TMRCSSR_SRC_USEC (0 << 0)
+
+/* watchdog registers */
+#define WDTCR 0x000
+#define WDTCR_SYSTEM_POR_RESET_ENABLE BIT(16)
+#define WDTCR_SYSTEM_DEBUG_RESET_ENABLE BIT(15)
+#define WDTCR_REMOTE_INT_ENABLE BIT(14)
+#define WDTCR_LOCAL_FIQ_ENABLE BIT(13)
+#define WDTCR_LOCAL_INT_ENABLE BIT(12)
+#define WDTCR_PERIOD_MASK (0xff << 4)
+#define WDTCR_PERIOD(x) (((x) & 0xff) << 4)
+#define WDTCR_TIMER_SOURCE_MASK 0xf
+#define WDTCR_TIMER_SOURCE(x) ((x) & 0xf)
+
+#define WDTCMDR 0x008
+#define WDTCMDR_DISABLE_COUNTER BIT(1)
+#define WDTCMDR_START_COUNTER BIT(0)
+
+#define WDTUR 0x00c
+#define WDTUR_UNLOCK_PATTERN 0x0000c45a
+
+struct tegra186_timer_soc {
+ unsigned int num_timers;
+ unsigned int num_wdts;
+};
+
+struct tegra186_tmr {
+ struct tegra186_timer *parent;
+ void __iomem *regs;
+ unsigned int index;
+ unsigned int hwirq;
+};
+
+struct tegra186_wdt {
+ struct watchdog_device base;
+
+ void __iomem *regs;
+ unsigned int index;
+ bool locked;
+
+ struct tegra186_tmr *tmr;
+};
+
+static inline struct tegra186_wdt *to_tegra186_wdt(struct watchdog_device *wdd)
+{
+ return container_of(wdd, struct tegra186_wdt, base);
+}
+
+struct tegra186_timer {
+ const struct tegra186_timer_soc *soc;
+ struct device *dev;
+ void __iomem *regs;
+
+ struct tegra186_wdt *wdt;
+ struct clocksource usec;
+ struct clocksource tsc;
+ struct clocksource osc;
+};
+
+static void tmr_writel(struct tegra186_tmr *tmr, u32 value, unsigned int offset)
+{
+ writel_relaxed(value, tmr->regs + offset);
+}
+
+static void wdt_writel(struct tegra186_wdt *wdt, u32 value, unsigned int offset)
+{
+ writel_relaxed(value, wdt->regs + offset);
+}
+
+static u32 wdt_readl(struct tegra186_wdt *wdt, unsigned int offset)
+{
+ return readl_relaxed(wdt->regs + offset);
+}
+
+static struct tegra186_tmr *tegra186_tmr_create(struct tegra186_timer *tegra,
+ unsigned int index)
+{
+ unsigned int offset = 0x10000 + index * 0x10000;
+ struct tegra186_tmr *tmr;
+
+ tmr = devm_kzalloc(tegra->dev, sizeof(*tmr), GFP_KERNEL);
+ if (!tmr)
+ return ERR_PTR(-ENOMEM);
+
+ tmr->parent = tegra;
+ tmr->regs = tegra->regs + offset;
+ tmr->index = index;
+ tmr->hwirq = 0;
+
+ return tmr;
+}
+
+static const struct watchdog_info tegra186_wdt_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+ .identity = "NVIDIA Tegra186 WDT",
+};
+
+static void tegra186_wdt_disable(struct tegra186_wdt *wdt)
+{
+ /* unlock and disable the watchdog */
+ wdt_writel(wdt, WDTUR_UNLOCK_PATTERN, WDTUR);
+ wdt_writel(wdt, WDTCMDR_DISABLE_COUNTER, WDTCMDR);
+
+ /* disable timer */
+ tmr_writel(wdt->tmr, 0, TMRCR);
+}
+
+static void tegra186_wdt_enable(struct tegra186_wdt *wdt)
+{
+ struct tegra186_timer *tegra = wdt->tmr->parent;
+ u32 value;
+
+ /* unmask hardware IRQ, this may have been lost across powergate */
+ value = TKEIE_WDT_MASK(wdt->index, 1);
+ writel(value, tegra->regs + TKEIE(wdt->tmr->hwirq));
+
+ /* clear interrupt */
+ tmr_writel(wdt->tmr, TMRSR_INTR_CLR, TMRSR);
+
+ /* select microsecond source */
+ tmr_writel(wdt->tmr, TMRCSSR_SRC_USEC, TMRCSSR);
+
+ /* configure timer (system reset happens on the fifth expiration) */
+ value = TMRCR_PTV(wdt->base.timeout * USEC_PER_SEC / 5) |
+ TMRCR_PERIODIC | TMRCR_ENABLE;
+ tmr_writel(wdt->tmr, value, TMRCR);
+
+ if (!wdt->locked) {
+ value = wdt_readl(wdt, WDTCR);
+
+ /* select the proper timer source */
+ value &= ~WDTCR_TIMER_SOURCE_MASK;
+ value |= WDTCR_TIMER_SOURCE(wdt->tmr->index);
+
+ /* single timer period since that's already configured */
+ value &= ~WDTCR_PERIOD_MASK;
+ value |= WDTCR_PERIOD(1);
+
+ /* enable local interrupt for WDT petting */
+ value |= WDTCR_LOCAL_INT_ENABLE;
+
+ /* enable local FIQ and remote interrupt for debug dump */
+ if (0)
+ value |= WDTCR_REMOTE_INT_ENABLE |
+ WDTCR_LOCAL_FIQ_ENABLE;
+
+ /* enable system debug reset (doesn't properly reboot) */
+ if (0)
+ value |= WDTCR_SYSTEM_DEBUG_RESET_ENABLE;
+
+ /* enable system POR reset */
+ value |= WDTCR_SYSTEM_POR_RESET_ENABLE;
+
+ wdt_writel(wdt, value, WDTCR);
+ }
+
+ wdt_writel(wdt, WDTCMDR_START_COUNTER, WDTCMDR);
+}
+
+static int tegra186_wdt_start(struct watchdog_device *wdd)
+{
+ struct tegra186_wdt *wdt = to_tegra186_wdt(wdd);
+
+ tegra186_wdt_enable(wdt);
+
+ return 0;
+}
+
+static int tegra186_wdt_stop(struct watchdog_device *wdd)
+{
+ struct tegra186_wdt *wdt = to_tegra186_wdt(wdd);
+
+ tegra186_wdt_disable(wdt);
+
+ return 0;
+}
+
+static int tegra186_wdt_ping(struct watchdog_device *wdd)
+{
+ struct tegra186_wdt *wdt = to_tegra186_wdt(wdd);
+
+ tegra186_wdt_disable(wdt);
+ tegra186_wdt_enable(wdt);
+
+ return 0;
+}
+
+static int tegra186_wdt_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout)
+{
+ struct tegra186_wdt *wdt = to_tegra186_wdt(wdd);
+
+ if (watchdog_active(&wdt->base))
+ tegra186_wdt_disable(wdt);
+
+ wdt->base.timeout = timeout;
+
+ if (watchdog_active(&wdt->base))
+ tegra186_wdt_enable(wdt);
+
+ return 0;
+}
+
+static const struct watchdog_ops tegra186_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = tegra186_wdt_start,
+ .stop = tegra186_wdt_stop,
+ .ping = tegra186_wdt_ping,
+ .set_timeout = tegra186_wdt_set_timeout,
+};
+
+static struct tegra186_wdt *tegra186_wdt_create(struct tegra186_timer *tegra,
+ unsigned int index)
+{
+ unsigned int offset = 0x10000, source;
+ struct tegra186_wdt *wdt;
+ u32 value;
+ int err;
+
+ offset += tegra->soc->num_timers * 0x10000 + index * 0x10000;
+
+ wdt = devm_kzalloc(tegra->dev, sizeof(*wdt), GFP_KERNEL);
+ if (!wdt)
+ return ERR_PTR(-ENOMEM);
+
+ wdt->regs = tegra->regs + offset;
+ wdt->index = index;
+
+ /* read the watchdog configuration since it might be locked down */
+ value = wdt_readl(wdt, WDTCR);
+
+ if (value & WDTCR_LOCAL_INT_ENABLE)
+ wdt->locked = true;
+
+ source = value & WDTCR_TIMER_SOURCE_MASK;
+
+ wdt->tmr = tegra186_tmr_create(tegra, source);
+ if (IS_ERR(wdt->tmr))
+ return ERR_CAST(wdt->tmr);
+
+ wdt->base.info = &tegra186_wdt_info;
+ wdt->base.ops = &tegra186_wdt_ops;
+ wdt->base.min_timeout = 1;
+ wdt->base.max_timeout = 255;
+ wdt->base.parent = tegra->dev;
+
+ err = watchdog_init_timeout(&wdt->base, 5, tegra->dev);
+ if (err < 0) {
+ dev_err(tegra->dev, "failed to initialize timeout: %d\n", err);
+ return ERR_PTR(err);
+ }
+
+ err = devm_watchdog_register_device(tegra->dev, &wdt->base);
+ if (err < 0) {
+ dev_err(tegra->dev, "failed to register WDT: %d\n", err);
+ return ERR_PTR(err);
+ }
+
+ return wdt;
+}
+
+static u64 tegra186_timer_tsc_read(struct clocksource *cs)
+{
+ struct tegra186_timer *tegra = container_of(cs, struct tegra186_timer,
+ tsc);
+ u32 hi, lo, ss;
+
+ hi = readl_relaxed(tegra->regs + TKETSC1);
+
+ /*
+ * The 56-bit value of the TSC is spread across two registers that are
+ * not synchronized. In order to read them atomically, ensure that the
+ * high 24 bits match before and after reading the low 32 bits.
+ */
+ do {
+ /* snapshot the high 24 bits */
+ ss = hi;
+
+ lo = readl_relaxed(tegra->regs + TKETSC0);
+ hi = readl_relaxed(tegra->regs + TKETSC1);
+ } while (hi != ss);
+
+ return (u64)hi << 32 | lo;
+}
+
+static int tegra186_timer_tsc_init(struct tegra186_timer *tegra)
+{
+ tegra->tsc.name = "tsc";
+ tegra->tsc.rating = 300;
+ tegra->tsc.read = tegra186_timer_tsc_read;
+ tegra->tsc.mask = CLOCKSOURCE_MASK(56);
+ tegra->tsc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ return clocksource_register_hz(&tegra->tsc, 31250000);
+}
+
+static u64 tegra186_timer_osc_read(struct clocksource *cs)
+{
+ struct tegra186_timer *tegra = container_of(cs, struct tegra186_timer,
+ osc);
+
+ return readl_relaxed(tegra->regs + TKEOSC);
+}
+
+static int tegra186_timer_osc_init(struct tegra186_timer *tegra)
+{
+ tegra->osc.name = "osc";
+ tegra->osc.rating = 300;
+ tegra->osc.read = tegra186_timer_osc_read;
+ tegra->osc.mask = CLOCKSOURCE_MASK(32);
+ tegra->osc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ return clocksource_register_hz(&tegra->osc, 38400000);
+}
+
+static u64 tegra186_timer_usec_read(struct clocksource *cs)
+{
+ struct tegra186_timer *tegra = container_of(cs, struct tegra186_timer,
+ usec);
+
+ return readl_relaxed(tegra->regs + TKEUSEC);
+}
+
+static int tegra186_timer_usec_init(struct tegra186_timer *tegra)
+{
+ tegra->usec.name = "usec";
+ tegra->usec.rating = 300;
+ tegra->usec.read = tegra186_timer_usec_read;
+ tegra->usec.mask = CLOCKSOURCE_MASK(32);
+ tegra->usec.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ return clocksource_register_hz(&tegra->usec, USEC_PER_SEC);
+}
+
+static irqreturn_t tegra186_timer_irq(int irq, void *data)
+{
+ struct tegra186_timer *tegra = data;
+
+ if (watchdog_active(&tegra->wdt->base)) {
+ tegra186_wdt_disable(tegra->wdt);
+ tegra186_wdt_enable(tegra->wdt);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int tegra186_timer_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct tegra186_timer *tegra;
+ unsigned int irq;
+ int err;
+
+ tegra = devm_kzalloc(dev, sizeof(*tegra), GFP_KERNEL);
+ if (!tegra)
+ return -ENOMEM;
+
+ tegra->soc = of_device_get_match_data(dev);
+ dev_set_drvdata(dev, tegra);
+ tegra->dev = dev;
+
+ tegra->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(tegra->regs))
+ return PTR_ERR(tegra->regs);
+
+ err = platform_get_irq(pdev, 0);
+ if (err < 0)
+ return err;
+
+ irq = err;
+
+ /* create a watchdog using a preconfigured timer */
+ tegra->wdt = tegra186_wdt_create(tegra, 0);
+ if (IS_ERR(tegra->wdt)) {
+ err = PTR_ERR(tegra->wdt);
+ dev_err(dev, "failed to create WDT: %d\n", err);
+ return err;
+ }
+
+ err = tegra186_timer_tsc_init(tegra);
+ if (err < 0) {
+ dev_err(dev, "failed to register TSC counter: %d\n", err);
+ return err;
+ }
+
+ err = tegra186_timer_osc_init(tegra);
+ if (err < 0) {
+ dev_err(dev, "failed to register OSC counter: %d\n", err);
+ goto unregister_tsc;
+ }
+
+ err = tegra186_timer_usec_init(tegra);
+ if (err < 0) {
+ dev_err(dev, "failed to register USEC counter: %d\n", err);
+ goto unregister_osc;
+ }
+
+ err = devm_request_irq(dev, irq, tegra186_timer_irq, 0,
+ "tegra186-timer", tegra);
+ if (err < 0) {
+ dev_err(dev, "failed to request IRQ#%u: %d\n", irq, err);
+ goto unregister_usec;
+ }
+
+ return 0;
+
+unregister_usec:
+ clocksource_unregister(&tegra->usec);
+unregister_osc:
+ clocksource_unregister(&tegra->osc);
+unregister_tsc:
+ clocksource_unregister(&tegra->tsc);
+ return err;
+}
+
+static void tegra186_timer_remove(struct platform_device *pdev)
+{
+ struct tegra186_timer *tegra = platform_get_drvdata(pdev);
+
+ clocksource_unregister(&tegra->usec);
+ clocksource_unregister(&tegra->osc);
+ clocksource_unregister(&tegra->tsc);
+}
+
+static int __maybe_unused tegra186_timer_suspend(struct device *dev)
+{
+ struct tegra186_timer *tegra = dev_get_drvdata(dev);
+
+ if (watchdog_active(&tegra->wdt->base))
+ tegra186_wdt_disable(tegra->wdt);
+
+ return 0;
+}
+
+static int __maybe_unused tegra186_timer_resume(struct device *dev)
+{
+ struct tegra186_timer *tegra = dev_get_drvdata(dev);
+
+ if (watchdog_active(&tegra->wdt->base))
+ tegra186_wdt_enable(tegra->wdt);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(tegra186_timer_pm_ops, tegra186_timer_suspend,
+ tegra186_timer_resume);
+
+static const struct tegra186_timer_soc tegra186_timer = {
+ .num_timers = 10,
+ .num_wdts = 3,
+};
+
+static const struct tegra186_timer_soc tegra234_timer = {
+ .num_timers = 16,
+ .num_wdts = 3,
+};
+
+static const struct of_device_id tegra186_timer_of_match[] = {
+ { .compatible = "nvidia,tegra186-timer", .data = &tegra186_timer },
+ { .compatible = "nvidia,tegra234-timer", .data = &tegra234_timer },
+ { }
+};
+MODULE_DEVICE_TABLE(of, tegra186_timer_of_match);
+
+static struct platform_driver tegra186_wdt_driver = {
+ .driver = {
+ .name = "tegra186-timer",
+ .pm = &tegra186_timer_pm_ops,
+ .of_match_table = tegra186_timer_of_match,
+ },
+ .probe = tegra186_timer_probe,
+ .remove_new = tegra186_timer_remove,
+};
+module_platform_driver(tegra186_wdt_driver);
+
+MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra186 timers driver");
diff --git a/drivers/clocksource/timer-ti-32k.c b/drivers/clocksource/timer-ti-32k.c
new file mode 100644
index 0000000000..59b0be482f
--- /dev/null
+++ b/drivers/clocksource/timer-ti-32k.c
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/**
+ * timer-ti-32k.c - OMAP2 32k Timer Support
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Update to use new clocksource/clockevent layers
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * Original driver:
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ * Juha Yrjölä <juha.yrjola@nokia.com>
+ * OMAP Dual-mode timer framework support by Timo Teras
+ *
+ * Some parts based off of TI's 24xx code:
+ *
+ * Copyright (C) 2004-2009 Texas Instruments, Inc.
+ *
+ * Roughly modelled after the OMAP1 MPU timer code.
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/sched_clock.h>
+#include <linux/clocksource.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+/*
+ * 32KHz clocksource ... always available, on pretty most chips except
+ * OMAP 730 and 1510. Other timers could be used as clocksources, with
+ * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
+ * but systems won't necessarily want to spend resources that way.
+ */
+
+#define OMAP2_32KSYNCNT_REV_OFF 0x0
+#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30)
+#define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10
+#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30
+
+struct ti_32k {
+ void __iomem *base;
+ void __iomem *counter;
+ struct clocksource cs;
+};
+
+static inline struct ti_32k *to_ti_32k(struct clocksource *cs)
+{
+ return container_of(cs, struct ti_32k, cs);
+}
+
+static u64 notrace ti_32k_read_cycles(struct clocksource *cs)
+{
+ struct ti_32k *ti = to_ti_32k(cs);
+
+ return (u64)readl_relaxed(ti->counter);
+}
+
+static struct ti_32k ti_32k_timer = {
+ .cs = {
+ .name = "32k_counter",
+ .rating = 250,
+ .read = ti_32k_read_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ },
+};
+
+static u64 notrace omap_32k_read_sched_clock(void)
+{
+ return ti_32k_read_cycles(&ti_32k_timer.cs);
+}
+
+static void __init ti_32k_timer_enable_clock(struct device_node *np,
+ const char *name)
+{
+ struct clk *clock;
+ int error;
+
+ clock = of_clk_get_by_name(np->parent, name);
+ if (IS_ERR(clock)) {
+ /* Only some SoCs have a separate interface clock */
+ if (PTR_ERR(clock) == -EINVAL && !strncmp("ick", name, 3))
+ return;
+
+ pr_warn("%s: could not get clock %s %li\n",
+ __func__, name, PTR_ERR(clock));
+ return;
+ }
+
+ error = clk_prepare_enable(clock);
+ if (error) {
+ pr_warn("%s: could not enable %s: %i\n",
+ __func__, name, error);
+ return;
+ }
+}
+
+static void __init ti_32k_timer_module_init(struct device_node *np,
+ void __iomem *base)
+{
+ void __iomem *sysc = base + 4;
+
+ if (!of_device_is_compatible(np->parent, "ti,sysc"))
+ return;
+
+ ti_32k_timer_enable_clock(np, "fck");
+ ti_32k_timer_enable_clock(np, "ick");
+
+ /*
+ * Force idle module as wkup domain is active with MPU.
+ * No need to tag the module disabled for ti-sysc probe.
+ */
+ writel_relaxed(0, sysc);
+}
+
+static int __init ti_32k_timer_init(struct device_node *np)
+{
+ int ret;
+
+ ti_32k_timer.base = of_iomap(np, 0);
+ if (!ti_32k_timer.base) {
+ pr_err("Can't ioremap 32k timer base\n");
+ return -ENXIO;
+ }
+
+ if (!of_machine_is_compatible("ti,am43"))
+ ti_32k_timer.cs.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
+
+ ti_32k_timer.counter = ti_32k_timer.base;
+ ti_32k_timer_module_init(np, ti_32k_timer.base);
+
+ /*
+ * 32k sync Counter IP register offsets vary between the highlander
+ * version and the legacy ones.
+ *
+ * The 'SCHEME' bits(30-31) of the revision register is used to identify
+ * the version.
+ */
+ if (readl_relaxed(ti_32k_timer.base + OMAP2_32KSYNCNT_REV_OFF) &
+ OMAP2_32KSYNCNT_REV_SCHEME)
+ ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_HIGH;
+ else
+ ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_LOW;
+
+ pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
+
+ ret = clocksource_register_hz(&ti_32k_timer.cs, 32768);
+ if (ret) {
+ pr_err("32k_counter: can't register clocksource\n");
+ return ret;
+ }
+
+ sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
+
+ return 0;
+}
+TIMER_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k",
+ ti_32k_timer_init);
diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
new file mode 100644
index 0000000000..c2dcd8d68e
--- /dev/null
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -0,0 +1,852 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/cpuhotplug.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+#include <linux/clk/clk-conf.h>
+
+#include <clocksource/timer-ti-dm.h>
+#include <dt-bindings/bus/ti-sysc.h>
+
+/* For type1, set SYSC_OMAP2_CLOCKACTIVITY for fck off on idle, l4 clock on */
+#define DMTIMER_TYPE1_ENABLE ((1 << 9) | (SYSC_IDLE_SMART << 3) | \
+ SYSC_OMAP2_ENAWAKEUP | SYSC_OMAP2_AUTOIDLE)
+#define DMTIMER_TYPE1_DISABLE (SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)
+#define DMTIMER_TYPE2_ENABLE (SYSC_IDLE_SMART_WKUP << 2)
+#define DMTIMER_RESET_WAIT 100000
+
+#define DMTIMER_INST_DONT_CARE ~0U
+
+static int counter_32k;
+static u32 clocksource;
+static u32 clockevent;
+
+/*
+ * Subset of the timer registers we use. Note that the register offsets
+ * depend on the timer revision detected.
+ */
+struct dmtimer_systimer {
+ void __iomem *base;
+ u8 sysc;
+ u8 irq_stat;
+ u8 irq_ena;
+ u8 pend;
+ u8 load;
+ u8 counter;
+ u8 ctrl;
+ u8 wakeup;
+ u8 ifctrl;
+ struct clk *fck;
+ struct clk *ick;
+ unsigned long rate;
+};
+
+struct dmtimer_clockevent {
+ struct clock_event_device dev;
+ struct dmtimer_systimer t;
+ u32 period;
+};
+
+struct dmtimer_clocksource {
+ struct clocksource dev;
+ struct dmtimer_systimer t;
+ unsigned int loadval;
+};
+
+/* Assumes v1 ip if bits [31:16] are zero */
+static bool dmtimer_systimer_revision1(struct dmtimer_systimer *t)
+{
+ u32 tidr = readl_relaxed(t->base);
+
+ return !(tidr >> 16);
+}
+
+static void dmtimer_systimer_enable(struct dmtimer_systimer *t)
+{
+ u32 val;
+
+ if (dmtimer_systimer_revision1(t))
+ val = DMTIMER_TYPE1_ENABLE;
+ else
+ val = DMTIMER_TYPE2_ENABLE;
+
+ writel_relaxed(val, t->base + t->sysc);
+}
+
+static void dmtimer_systimer_disable(struct dmtimer_systimer *t)
+{
+ if (!dmtimer_systimer_revision1(t))
+ return;
+
+ writel_relaxed(DMTIMER_TYPE1_DISABLE, t->base + t->sysc);
+}
+
+static int __init dmtimer_systimer_type1_reset(struct dmtimer_systimer *t)
+{
+ void __iomem *syss = t->base + OMAP_TIMER_V1_SYS_STAT_OFFSET;
+ int ret;
+ u32 l;
+
+ dmtimer_systimer_enable(t);
+ writel_relaxed(BIT(1) | BIT(2), t->base + t->ifctrl);
+ ret = readl_poll_timeout_atomic(syss, l, l & BIT(0), 100,
+ DMTIMER_RESET_WAIT);
+
+ return ret;
+}
+
+/* Note we must use io_base instead of func_base for type2 OCP regs */
+static int __init dmtimer_systimer_type2_reset(struct dmtimer_systimer *t)
+{
+ void __iomem *sysc = t->base + t->sysc;
+ u32 l;
+
+ dmtimer_systimer_enable(t);
+ l = readl_relaxed(sysc);
+ l |= BIT(0);
+ writel_relaxed(l, sysc);
+
+ return readl_poll_timeout_atomic(sysc, l, !(l & BIT(0)), 100,
+ DMTIMER_RESET_WAIT);
+}
+
+static int __init dmtimer_systimer_reset(struct dmtimer_systimer *t)
+{
+ int ret;
+
+ if (dmtimer_systimer_revision1(t))
+ ret = dmtimer_systimer_type1_reset(t);
+ else
+ ret = dmtimer_systimer_type2_reset(t);
+ if (ret < 0) {
+ pr_err("%s failed with %i\n", __func__, ret);
+
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id counter_match_table[] = {
+ { .compatible = "ti,omap-counter32k" },
+ { /* Sentinel */ },
+};
+
+/*
+ * Check if the SoC als has a usable working 32 KiHz counter. The 32 KiHz
+ * counter is handled by timer-ti-32k, but we need to detect it as it
+ * affects the preferred dmtimer system timer configuration. There is
+ * typically no use for a dmtimer clocksource if the 32 KiHz counter is
+ * present, except on am437x as described below.
+ */
+static void __init dmtimer_systimer_check_counter32k(void)
+{
+ struct device_node *np;
+
+ if (counter_32k)
+ return;
+
+ np = of_find_matching_node(NULL, counter_match_table);
+ if (!np) {
+ counter_32k = -ENODEV;
+
+ return;
+ }
+
+ if (of_device_is_available(np))
+ counter_32k = 1;
+ else
+ counter_32k = -ENODEV;
+
+ of_node_put(np);
+}
+
+static const struct of_device_id dmtimer_match_table[] = {
+ { .compatible = "ti,omap2420-timer", },
+ { .compatible = "ti,omap3430-timer", },
+ { .compatible = "ti,omap4430-timer", },
+ { .compatible = "ti,omap5430-timer", },
+ { .compatible = "ti,am335x-timer", },
+ { .compatible = "ti,am335x-timer-1ms", },
+ { .compatible = "ti,dm814-timer", },
+ { .compatible = "ti,dm816-timer", },
+ { /* Sentinel */ },
+};
+
+/*
+ * Checks that system timers are configured to not reset and idle during
+ * the generic timer-ti-dm device driver probe. And that the system timer
+ * source clocks are properly configured. Also, let's not hog any DSP and
+ * PWM capable timers unnecessarily as system timers.
+ */
+static bool __init dmtimer_is_preferred(struct device_node *np)
+{
+ if (!of_device_is_available(np))
+ return false;
+
+ if (!of_property_read_bool(np->parent,
+ "ti,no-reset-on-init"))
+ return false;
+
+ if (!of_property_read_bool(np->parent, "ti,no-idle"))
+ return false;
+
+ /* Secure gptimer12 is always clocked with a fixed source */
+ if (!of_property_read_bool(np, "ti,timer-secure")) {
+ if (!of_property_read_bool(np, "assigned-clocks"))
+ return false;
+
+ if (!of_property_read_bool(np, "assigned-clock-parents"))
+ return false;
+ }
+
+ if (of_property_read_bool(np, "ti,timer-dsp"))
+ return false;
+
+ if (of_property_read_bool(np, "ti,timer-pwm"))
+ return false;
+
+ return true;
+}
+
+/*
+ * Finds the first available usable always-on timer, and assigns it to either
+ * clockevent or clocksource depending if the counter_32k is available on the
+ * SoC or not.
+ *
+ * Some omap3 boards with unreliable oscillator must not use the counter_32k
+ * or dmtimer1 with 32 KiHz source. Additionally, the boards with unreliable
+ * oscillator should really set counter_32k as disabled, and delete dmtimer1
+ * ti,always-on property, but let's not count on it. For these quirky cases,
+ * we prefer using the always-on secure dmtimer12 with the internal 32 KiHz
+ * clock as the clocksource, and any available dmtimer as clockevent.
+ *
+ * For am437x, we are using am335x style dmtimer clocksource. It is unclear
+ * if this quirk handling is really needed, but let's change it separately
+ * based on testing as it might cause side effects.
+ */
+static void __init dmtimer_systimer_assign_alwon(void)
+{
+ struct device_node *np;
+ u32 pa = 0;
+ bool quirk_unreliable_oscillator = false;
+
+ /* Quirk unreliable 32 KiHz oscillator with incomplete dts */
+ if (of_machine_is_compatible("ti,omap3-beagle-ab4")) {
+ quirk_unreliable_oscillator = true;
+ counter_32k = -ENODEV;
+ }
+
+ /* Quirk am437x using am335x style dmtimer clocksource */
+ if (of_machine_is_compatible("ti,am43"))
+ counter_32k = -ENODEV;
+
+ for_each_matching_node(np, dmtimer_match_table) {
+ struct resource res;
+ if (!dmtimer_is_preferred(np))
+ continue;
+
+ if (!of_property_read_bool(np, "ti,timer-alwon"))
+ continue;
+
+ if (of_address_to_resource(np, 0, &res))
+ continue;
+
+ pa = res.start;
+
+ /* Quirky omap3 boards must use dmtimer12 */
+ if (quirk_unreliable_oscillator && pa == 0x48318000)
+ continue;
+
+ of_node_put(np);
+ break;
+ }
+
+ /* Usually no need for dmtimer clocksource if we have counter32 */
+ if (counter_32k >= 0) {
+ clockevent = pa;
+ clocksource = 0;
+ } else {
+ clocksource = pa;
+ clockevent = DMTIMER_INST_DONT_CARE;
+ }
+}
+
+/* Finds the first usable dmtimer, used for the don't care case */
+static u32 __init dmtimer_systimer_find_first_available(void)
+{
+ struct device_node *np;
+ u32 pa = 0;
+
+ for_each_matching_node(np, dmtimer_match_table) {
+ struct resource res;
+ if (!dmtimer_is_preferred(np))
+ continue;
+
+ if (of_address_to_resource(np, 0, &res))
+ continue;
+
+ if (res.start == clocksource || res.start == clockevent)
+ continue;
+
+ pa = res.start;
+ of_node_put(np);
+ break;
+ }
+
+ return pa;
+}
+
+/* Selects the best clocksource and clockevent to use */
+static void __init dmtimer_systimer_select_best(void)
+{
+ dmtimer_systimer_check_counter32k();
+ dmtimer_systimer_assign_alwon();
+
+ if (clockevent == DMTIMER_INST_DONT_CARE)
+ clockevent = dmtimer_systimer_find_first_available();
+
+ pr_debug("%s: counter_32k: %i clocksource: %08x clockevent: %08x\n",
+ __func__, counter_32k, clocksource, clockevent);
+}
+
+/* Interface clocks are only available on some SoCs variants */
+static int __init dmtimer_systimer_init_clock(struct dmtimer_systimer *t,
+ struct device_node *np,
+ const char *name,
+ unsigned long *rate)
+{
+ struct clk *clock;
+ unsigned long r;
+ bool is_ick = false;
+ int error;
+
+ is_ick = !strncmp(name, "ick", 3);
+
+ clock = of_clk_get_by_name(np, name);
+ if ((PTR_ERR(clock) == -EINVAL) && is_ick)
+ return 0;
+ else if (IS_ERR(clock))
+ return PTR_ERR(clock);
+
+ error = clk_prepare_enable(clock);
+ if (error)
+ return error;
+
+ r = clk_get_rate(clock);
+ if (!r) {
+ clk_disable_unprepare(clock);
+ return -ENODEV;
+ }
+
+ if (is_ick)
+ t->ick = clock;
+ else
+ t->fck = clock;
+
+ *rate = r;
+
+ return 0;
+}
+
+static int __init dmtimer_systimer_setup(struct device_node *np,
+ struct dmtimer_systimer *t)
+{
+ unsigned long rate;
+ u8 regbase;
+ int error;
+
+ if (!of_device_is_compatible(np->parent, "ti,sysc"))
+ return -EINVAL;
+
+ t->base = of_iomap(np, 0);
+ if (!t->base)
+ return -ENXIO;
+
+ /*
+ * Enable optional assigned-clock-parents configured at the timer
+ * node level. For regular device drivers, this is done automatically
+ * by bus related code such as platform_drv_probe().
+ */
+ error = of_clk_set_defaults(np, false);
+ if (error < 0)
+ pr_err("%s: clock source init failed: %i\n", __func__, error);
+
+ /* For ti-sysc, we have timer clocks at the parent module level */
+ error = dmtimer_systimer_init_clock(t, np->parent, "fck", &rate);
+ if (error)
+ goto err_unmap;
+
+ t->rate = rate;
+
+ error = dmtimer_systimer_init_clock(t, np->parent, "ick", &rate);
+ if (error)
+ goto err_unmap;
+
+ if (dmtimer_systimer_revision1(t)) {
+ t->irq_stat = OMAP_TIMER_V1_STAT_OFFSET;
+ t->irq_ena = OMAP_TIMER_V1_INT_EN_OFFSET;
+ t->pend = _OMAP_TIMER_WRITE_PEND_OFFSET;
+ regbase = 0;
+ } else {
+ t->irq_stat = OMAP_TIMER_V2_IRQSTATUS;
+ t->irq_ena = OMAP_TIMER_V2_IRQENABLE_SET;
+ regbase = OMAP_TIMER_V2_FUNC_OFFSET;
+ t->pend = regbase + _OMAP_TIMER_WRITE_PEND_OFFSET;
+ }
+
+ t->sysc = OMAP_TIMER_OCP_CFG_OFFSET;
+ t->load = regbase + _OMAP_TIMER_LOAD_OFFSET;
+ t->counter = regbase + _OMAP_TIMER_COUNTER_OFFSET;
+ t->ctrl = regbase + _OMAP_TIMER_CTRL_OFFSET;
+ t->wakeup = regbase + _OMAP_TIMER_WAKEUP_EN_OFFSET;
+ t->ifctrl = regbase + _OMAP_TIMER_IF_CTRL_OFFSET;
+
+ dmtimer_systimer_reset(t);
+ dmtimer_systimer_enable(t);
+ pr_debug("dmtimer rev %08x sysc %08x\n", readl_relaxed(t->base),
+ readl_relaxed(t->base + t->sysc));
+
+ return 0;
+
+err_unmap:
+ iounmap(t->base);
+
+ return error;
+}
+
+/* Clockevent */
+static struct dmtimer_clockevent *
+to_dmtimer_clockevent(struct clock_event_device *clockevent)
+{
+ return container_of(clockevent, struct dmtimer_clockevent, dev);
+}
+
+static irqreturn_t dmtimer_clockevent_interrupt(int irq, void *data)
+{
+ struct dmtimer_clockevent *clkevt = data;
+ struct dmtimer_systimer *t = &clkevt->t;
+
+ writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->irq_stat);
+ clkevt->dev.event_handler(&clkevt->dev);
+
+ return IRQ_HANDLED;
+}
+
+static int dmtimer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt);
+ struct dmtimer_systimer *t = &clkevt->t;
+ void __iomem *pend = t->base + t->pend;
+
+ while (readl_relaxed(pend) & WP_TCRR)
+ cpu_relax();
+ writel_relaxed(0xffffffff - cycles, t->base + t->counter);
+
+ while (readl_relaxed(pend) & WP_TCLR)
+ cpu_relax();
+ writel_relaxed(OMAP_TIMER_CTRL_ST, t->base + t->ctrl);
+
+ return 0;
+}
+
+static int dmtimer_clockevent_shutdown(struct clock_event_device *evt)
+{
+ struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt);
+ struct dmtimer_systimer *t = &clkevt->t;
+ void __iomem *ctrl = t->base + t->ctrl;
+ u32 l;
+
+ l = readl_relaxed(ctrl);
+ if (l & OMAP_TIMER_CTRL_ST) {
+ l &= ~BIT(0);
+ writel_relaxed(l, ctrl);
+ /* Flush posted write */
+ l = readl_relaxed(ctrl);
+ /* Wait for functional clock period x 3.5 */
+ udelay(3500000 / t->rate + 1);
+ }
+ writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->irq_stat);
+
+ return 0;
+}
+
+static int dmtimer_set_periodic(struct clock_event_device *evt)
+{
+ struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt);
+ struct dmtimer_systimer *t = &clkevt->t;
+ void __iomem *pend = t->base + t->pend;
+
+ dmtimer_clockevent_shutdown(evt);
+
+ /* Looks like we need to first set the load value separately */
+ while (readl_relaxed(pend) & WP_TLDR)
+ cpu_relax();
+ writel_relaxed(clkevt->period, t->base + t->load);
+
+ while (readl_relaxed(pend) & WP_TCRR)
+ cpu_relax();
+ writel_relaxed(clkevt->period, t->base + t->counter);
+
+ while (readl_relaxed(pend) & WP_TCLR)
+ cpu_relax();
+ writel_relaxed(OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
+ t->base + t->ctrl);
+
+ return 0;
+}
+
+static void omap_clockevent_idle(struct clock_event_device *evt)
+{
+ struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt);
+ struct dmtimer_systimer *t = &clkevt->t;
+
+ dmtimer_systimer_disable(t);
+ clk_disable(t->fck);
+}
+
+static void omap_clockevent_unidle(struct clock_event_device *evt)
+{
+ struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt);
+ struct dmtimer_systimer *t = &clkevt->t;
+ int error;
+
+ error = clk_enable(t->fck);
+ if (error)
+ pr_err("could not enable timer fck on resume: %i\n", error);
+
+ dmtimer_systimer_enable(t);
+ writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->irq_ena);
+ writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->wakeup);
+}
+
+static int __init dmtimer_clkevt_init_common(struct dmtimer_clockevent *clkevt,
+ struct device_node *np,
+ unsigned int features,
+ const struct cpumask *cpumask,
+ const char *name,
+ int rating)
+{
+ struct clock_event_device *dev;
+ struct dmtimer_systimer *t;
+ int error;
+
+ t = &clkevt->t;
+ dev = &clkevt->dev;
+
+ /*
+ * We mostly use cpuidle_coupled with ARM local timers for runtime,
+ * so there's probably no use for CLOCK_EVT_FEAT_DYNIRQ here.
+ */
+ dev->features = features;
+ dev->rating = rating;
+ dev->set_next_event = dmtimer_set_next_event;
+ dev->set_state_shutdown = dmtimer_clockevent_shutdown;
+ dev->set_state_periodic = dmtimer_set_periodic;
+ dev->set_state_oneshot = dmtimer_clockevent_shutdown;
+ dev->set_state_oneshot_stopped = dmtimer_clockevent_shutdown;
+ dev->tick_resume = dmtimer_clockevent_shutdown;
+ dev->cpumask = cpumask;
+
+ dev->irq = irq_of_parse_and_map(np, 0);
+ if (!dev->irq)
+ return -ENXIO;
+
+ error = dmtimer_systimer_setup(np, &clkevt->t);
+ if (error)
+ return error;
+
+ clkevt->period = 0xffffffff - DIV_ROUND_CLOSEST(t->rate, HZ);
+
+ /*
+ * For clock-event timers we never read the timer counter and
+ * so we are not impacted by errata i103 and i767. Therefore,
+ * we can safely ignore this errata for clock-event timers.
+ */
+ writel_relaxed(OMAP_TIMER_CTRL_POSTED, t->base + t->ifctrl);
+
+ error = request_irq(dev->irq, dmtimer_clockevent_interrupt,
+ IRQF_TIMER, name, clkevt);
+ if (error)
+ goto err_out_unmap;
+
+ writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->irq_ena);
+ writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->wakeup);
+
+ pr_info("TI gptimer %s: %s%lu Hz at %pOF\n",
+ name, of_property_read_bool(np, "ti,timer-alwon") ?
+ "always-on " : "", t->rate, np->parent);
+
+ return 0;
+
+err_out_unmap:
+ iounmap(t->base);
+
+ return error;
+}
+
+static int __init dmtimer_clockevent_init(struct device_node *np)
+{
+ struct dmtimer_clockevent *clkevt;
+ int error;
+
+ clkevt = kzalloc(sizeof(*clkevt), GFP_KERNEL);
+ if (!clkevt)
+ return -ENOMEM;
+
+ error = dmtimer_clkevt_init_common(clkevt, np,
+ CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ cpu_possible_mask, "clockevent",
+ 300);
+ if (error)
+ goto err_out_free;
+
+ clockevents_config_and_register(&clkevt->dev, clkevt->t.rate,
+ 3, /* Timer internal resync latency */
+ 0xffffffff);
+
+ if (of_machine_is_compatible("ti,am33xx") ||
+ of_machine_is_compatible("ti,am43")) {
+ clkevt->dev.suspend = omap_clockevent_idle;
+ clkevt->dev.resume = omap_clockevent_unidle;
+ }
+
+ return 0;
+
+err_out_free:
+ kfree(clkevt);
+
+ return error;
+}
+
+/* Dmtimer as percpu timer. See dra7 ARM architected timer wrap erratum i940 */
+static DEFINE_PER_CPU(struct dmtimer_clockevent, dmtimer_percpu_timer);
+
+static int __init dmtimer_percpu_timer_init(struct device_node *np, int cpu)
+{
+ struct dmtimer_clockevent *clkevt;
+ int error;
+
+ if (!cpu_possible(cpu))
+ return -EINVAL;
+
+ if (!of_property_read_bool(np->parent, "ti,no-reset-on-init") ||
+ !of_property_read_bool(np->parent, "ti,no-idle"))
+ pr_warn("Incomplete dtb for percpu dmtimer %pOF\n", np->parent);
+
+ clkevt = per_cpu_ptr(&dmtimer_percpu_timer, cpu);
+
+ error = dmtimer_clkevt_init_common(clkevt, np, CLOCK_EVT_FEAT_ONESHOT,
+ cpumask_of(cpu), "percpu-dmtimer",
+ 500);
+ if (error)
+ return error;
+
+ return 0;
+}
+
+/* See TRM for timer internal resynch latency */
+static int omap_dmtimer_starting_cpu(unsigned int cpu)
+{
+ struct dmtimer_clockevent *clkevt = per_cpu_ptr(&dmtimer_percpu_timer, cpu);
+ struct clock_event_device *dev = &clkevt->dev;
+ struct dmtimer_systimer *t = &clkevt->t;
+
+ clockevents_config_and_register(dev, t->rate, 3, ULONG_MAX);
+ irq_force_affinity(dev->irq, cpumask_of(cpu));
+
+ return 0;
+}
+
+static int __init dmtimer_percpu_timer_startup(void)
+{
+ struct dmtimer_clockevent *clkevt = per_cpu_ptr(&dmtimer_percpu_timer, 0);
+ struct dmtimer_systimer *t = &clkevt->t;
+
+ if (t->sysc) {
+ cpuhp_setup_state(CPUHP_AP_TI_GP_TIMER_STARTING,
+ "clockevents/omap/gptimer:starting",
+ omap_dmtimer_starting_cpu, NULL);
+ }
+
+ return 0;
+}
+subsys_initcall(dmtimer_percpu_timer_startup);
+
+static int __init dmtimer_percpu_quirk_init(struct device_node *np, u32 pa)
+{
+ struct device_node *arm_timer;
+
+ arm_timer = of_find_compatible_node(NULL, NULL, "arm,armv7-timer");
+ if (of_device_is_available(arm_timer)) {
+ pr_warn_once("ARM architected timer wrap issue i940 detected\n");
+ return 0;
+ }
+
+ if (pa == 0x4882c000) /* dra7 dmtimer15 */
+ return dmtimer_percpu_timer_init(np, 0);
+ else if (pa == 0x4882e000) /* dra7 dmtimer16 */
+ return dmtimer_percpu_timer_init(np, 1);
+
+ return 0;
+}
+
+/* Clocksource */
+static struct dmtimer_clocksource *
+to_dmtimer_clocksource(struct clocksource *cs)
+{
+ return container_of(cs, struct dmtimer_clocksource, dev);
+}
+
+static u64 dmtimer_clocksource_read_cycles(struct clocksource *cs)
+{
+ struct dmtimer_clocksource *clksrc = to_dmtimer_clocksource(cs);
+ struct dmtimer_systimer *t = &clksrc->t;
+
+ return (u64)readl_relaxed(t->base + t->counter);
+}
+
+static void __iomem *dmtimer_sched_clock_counter;
+
+static u64 notrace dmtimer_read_sched_clock(void)
+{
+ return readl_relaxed(dmtimer_sched_clock_counter);
+}
+
+static void dmtimer_clocksource_suspend(struct clocksource *cs)
+{
+ struct dmtimer_clocksource *clksrc = to_dmtimer_clocksource(cs);
+ struct dmtimer_systimer *t = &clksrc->t;
+
+ clksrc->loadval = readl_relaxed(t->base + t->counter);
+ dmtimer_systimer_disable(t);
+ clk_disable(t->fck);
+}
+
+static void dmtimer_clocksource_resume(struct clocksource *cs)
+{
+ struct dmtimer_clocksource *clksrc = to_dmtimer_clocksource(cs);
+ struct dmtimer_systimer *t = &clksrc->t;
+ int error;
+
+ error = clk_enable(t->fck);
+ if (error)
+ pr_err("could not enable timer fck on resume: %i\n", error);
+
+ dmtimer_systimer_enable(t);
+ writel_relaxed(clksrc->loadval, t->base + t->counter);
+ writel_relaxed(OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR,
+ t->base + t->ctrl);
+}
+
+static int __init dmtimer_clocksource_init(struct device_node *np)
+{
+ struct dmtimer_clocksource *clksrc;
+ struct dmtimer_systimer *t;
+ struct clocksource *dev;
+ int error;
+
+ clksrc = kzalloc(sizeof(*clksrc), GFP_KERNEL);
+ if (!clksrc)
+ return -ENOMEM;
+
+ dev = &clksrc->dev;
+ t = &clksrc->t;
+
+ error = dmtimer_systimer_setup(np, t);
+ if (error)
+ goto err_out_free;
+
+ dev->name = "dmtimer";
+ dev->rating = 300;
+ dev->read = dmtimer_clocksource_read_cycles;
+ dev->mask = CLOCKSOURCE_MASK(32);
+ dev->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ /* Unlike for clockevent, legacy code sets suspend only for am4 */
+ if (of_machine_is_compatible("ti,am43")) {
+ dev->suspend = dmtimer_clocksource_suspend;
+ dev->resume = dmtimer_clocksource_resume;
+ }
+
+ writel_relaxed(0, t->base + t->counter);
+ writel_relaxed(OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR,
+ t->base + t->ctrl);
+
+ pr_info("TI gptimer clocksource: %s%pOF\n",
+ of_property_read_bool(np, "ti,timer-alwon") ?
+ "always-on " : "", np->parent);
+
+ if (!dmtimer_sched_clock_counter) {
+ dmtimer_sched_clock_counter = t->base + t->counter;
+ sched_clock_register(dmtimer_read_sched_clock, 32, t->rate);
+ }
+
+ if (clocksource_register_hz(dev, t->rate))
+ pr_err("Could not register clocksource %pOF\n", np);
+
+ return 0;
+
+err_out_free:
+ kfree(clksrc);
+
+ return -ENODEV;
+}
+
+/*
+ * To detect between a clocksource and clockevent, we assume the device tree
+ * has no interrupts configured for a clocksource timer.
+ */
+static int __init dmtimer_systimer_init(struct device_node *np)
+{
+ struct resource res;
+ u32 pa;
+
+ /* One time init for the preferred timer configuration */
+ if (!clocksource && !clockevent)
+ dmtimer_systimer_select_best();
+
+ if (!clocksource && !clockevent) {
+ pr_err("%s: unable to detect system timers, update dtb?\n",
+ __func__);
+
+ return -EINVAL;
+ }
+
+
+ of_address_to_resource(np, 0, &res);
+ pa = (u32)res.start;
+ if (!pa)
+ return -EINVAL;
+
+ if (counter_32k <= 0 && clocksource == pa)
+ return dmtimer_clocksource_init(np);
+
+ if (clockevent == pa)
+ return dmtimer_clockevent_init(np);
+
+ if (of_machine_is_compatible("ti,dra7"))
+ return dmtimer_percpu_quirk_init(np, pa);
+
+ return 0;
+}
+
+TIMER_OF_DECLARE(systimer_omap2, "ti,omap2420-timer", dmtimer_systimer_init);
+TIMER_OF_DECLARE(systimer_omap3, "ti,omap3430-timer", dmtimer_systimer_init);
+TIMER_OF_DECLARE(systimer_omap4, "ti,omap4430-timer", dmtimer_systimer_init);
+TIMER_OF_DECLARE(systimer_omap5, "ti,omap5430-timer", dmtimer_systimer_init);
+TIMER_OF_DECLARE(systimer_am33x, "ti,am335x-timer", dmtimer_systimer_init);
+TIMER_OF_DECLARE(systimer_am3ms, "ti,am335x-timer-1ms", dmtimer_systimer_init);
+TIMER_OF_DECLARE(systimer_dm814, "ti,dm814-timer", dmtimer_systimer_init);
+TIMER_OF_DECLARE(systimer_dm816, "ti,dm816-timer", dmtimer_systimer_init);
diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
new file mode 100644
index 0000000000..56acf26172
--- /dev/null
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -0,0 +1,1306 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * linux/arch/arm/plat-omap/dmtimer.c
+ *
+ * OMAP Dual-Mode Timers
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * dmtimer adaptation to platform_driver.
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * OMAP2 support by Juha Yrjola
+ * API improvements and OMAP2 clock framework support by Timo Teras
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/cpu_pm.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/dmtimer-omap.h>
+
+#include <clocksource/timer-ti-dm.h>
+
+/*
+ * timer errata flags
+ *
+ * Errata i103/i767 impacts all OMAP3/4/5 devices including AM33xx. This
+ * errata prevents us from using posted mode on these devices, unless the
+ * timer counter register is never read. For more details please refer to
+ * the OMAP3/4/5 errata documents.
+ */
+#define OMAP_TIMER_ERRATA_I103_I767 0x80000000
+
+/* posted mode types */
+#define OMAP_TIMER_NONPOSTED 0x00
+#define OMAP_TIMER_POSTED 0x01
+
+/* register offsets with the write pending bit encoded */
+#define WPSHIFT 16
+
+#define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_CTRL_REG (_OMAP_TIMER_CTRL_OFFSET \
+ | (WP_TCLR << WPSHIFT))
+
+#define OMAP_TIMER_COUNTER_REG (_OMAP_TIMER_COUNTER_OFFSET \
+ | (WP_TCRR << WPSHIFT))
+
+#define OMAP_TIMER_LOAD_REG (_OMAP_TIMER_LOAD_OFFSET \
+ | (WP_TLDR << WPSHIFT))
+
+#define OMAP_TIMER_TRIGGER_REG (_OMAP_TIMER_TRIGGER_OFFSET \
+ | (WP_TTGR << WPSHIFT))
+
+#define OMAP_TIMER_WRITE_PEND_REG (_OMAP_TIMER_WRITE_PEND_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_MATCH_REG (_OMAP_TIMER_MATCH_OFFSET \
+ | (WP_TMAR << WPSHIFT))
+
+#define OMAP_TIMER_CAPTURE_REG (_OMAP_TIMER_CAPTURE_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_IF_CTRL_REG (_OMAP_TIMER_IF_CTRL_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_CAPTURE2_REG (_OMAP_TIMER_CAPTURE2_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_TICK_POS_REG (_OMAP_TIMER_TICK_POS_OFFSET \
+ | (WP_TPIR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_NEG_REG (_OMAP_TIMER_TICK_NEG_OFFSET \
+ | (WP_TNIR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_COUNT_REG (_OMAP_TIMER_TICK_COUNT_OFFSET \
+ | (WP_TCVR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_INT_MASK_SET_REG \
+ (_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \
+ (_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
+
+struct timer_regs {
+ u32 ocp_cfg;
+ u32 tidr;
+ u32 tier;
+ u32 twer;
+ u32 tclr;
+ u32 tcrr;
+ u32 tldr;
+ u32 ttrg;
+ u32 twps;
+ u32 tmar;
+ u32 tcar1;
+ u32 tsicr;
+ u32 tcar2;
+ u32 tpir;
+ u32 tnir;
+ u32 tcvr;
+ u32 tocr;
+ u32 towr;
+};
+
+struct dmtimer {
+ struct omap_dm_timer cookie;
+ int id;
+ int irq;
+ struct clk *fclk;
+
+ void __iomem *io_base;
+ int irq_stat; /* TISR/IRQSTATUS interrupt status */
+ int irq_ena; /* irq enable */
+ int irq_dis; /* irq disable, only on v2 ip */
+ void __iomem *pend; /* write pending */
+ void __iomem *func_base; /* function register base */
+
+ atomic_t enabled;
+ unsigned long rate;
+ unsigned reserved:1;
+ unsigned posted:1;
+ unsigned omap1:1;
+ struct timer_regs context;
+ int revision;
+ u32 capability;
+ u32 errata;
+ struct platform_device *pdev;
+ struct list_head node;
+ struct notifier_block nb;
+ struct notifier_block fclk_nb;
+ unsigned long fclk_rate;
+};
+
+static u32 omap_reserved_systimers;
+static LIST_HEAD(omap_timer_list);
+static DEFINE_SPINLOCK(dm_timer_lock);
+
+enum {
+ REQUEST_ANY = 0,
+ REQUEST_BY_ID,
+ REQUEST_BY_CAP,
+ REQUEST_BY_NODE,
+};
+
+/**
+ * dmtimer_read - read timer registers in posted and non-posted mode
+ * @timer: timer pointer over which read operation to perform
+ * @reg: lowest byte holds the register offset
+ *
+ * The posted mode bit is encoded in reg. Note that in posted mode, write
+ * pending bit must be checked. Otherwise a read of a non completed write
+ * will produce an error.
+ */
+static inline u32 dmtimer_read(struct dmtimer *timer, u32 reg)
+{
+ u16 wp, offset;
+
+ wp = reg >> WPSHIFT;
+ offset = reg & 0xff;
+
+ /* Wait for a possible write pending bit in posted mode */
+ if (wp && timer->posted)
+ while (readl_relaxed(timer->pend) & wp)
+ cpu_relax();
+
+ return readl_relaxed(timer->func_base + offset);
+}
+
+/**
+ * dmtimer_write - write timer registers in posted and non-posted mode
+ * @timer: timer pointer over which write operation is to perform
+ * @reg: lowest byte holds the register offset
+ * @val: data to write into the register
+ *
+ * The posted mode bit is encoded in reg. Note that in posted mode, the write
+ * pending bit must be checked. Otherwise a write on a register which has a
+ * pending write will be lost.
+ */
+static inline void dmtimer_write(struct dmtimer *timer, u32 reg, u32 val)
+{
+ u16 wp, offset;
+
+ wp = reg >> WPSHIFT;
+ offset = reg & 0xff;
+
+ /* Wait for a possible write pending bit in posted mode */
+ if (wp && timer->posted)
+ while (readl_relaxed(timer->pend) & wp)
+ cpu_relax();
+
+ writel_relaxed(val, timer->func_base + offset);
+}
+
+static inline void __omap_dm_timer_init_regs(struct dmtimer *timer)
+{
+ u32 tidr;
+
+ /* Assume v1 ip if bits [31:16] are zero */
+ tidr = readl_relaxed(timer->io_base);
+ if (!(tidr >> 16)) {
+ timer->revision = 1;
+ timer->irq_stat = OMAP_TIMER_V1_STAT_OFFSET;
+ timer->irq_ena = OMAP_TIMER_V1_INT_EN_OFFSET;
+ timer->irq_dis = OMAP_TIMER_V1_INT_EN_OFFSET;
+ timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
+ timer->func_base = timer->io_base;
+ } else {
+ timer->revision = 2;
+ timer->irq_stat = OMAP_TIMER_V2_IRQSTATUS - OMAP_TIMER_V2_FUNC_OFFSET;
+ timer->irq_ena = OMAP_TIMER_V2_IRQENABLE_SET - OMAP_TIMER_V2_FUNC_OFFSET;
+ timer->irq_dis = OMAP_TIMER_V2_IRQENABLE_CLR - OMAP_TIMER_V2_FUNC_OFFSET;
+ timer->pend = timer->io_base +
+ _OMAP_TIMER_WRITE_PEND_OFFSET +
+ OMAP_TIMER_V2_FUNC_OFFSET;
+ timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
+ }
+}
+
+/*
+ * __omap_dm_timer_enable_posted - enables write posted mode
+ * @timer: pointer to timer instance handle
+ *
+ * Enables the write posted mode for the timer. When posted mode is enabled
+ * writes to certain timer registers are immediately acknowledged by the
+ * internal bus and hence prevents stalling the CPU waiting for the write to
+ * complete. Enabling this feature can improve performance for writing to the
+ * timer registers.
+ */
+static inline void __omap_dm_timer_enable_posted(struct dmtimer *timer)
+{
+ if (timer->posted)
+ return;
+
+ if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
+ timer->posted = OMAP_TIMER_NONPOSTED;
+ dmtimer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0);
+ return;
+ }
+
+ dmtimer_write(timer, OMAP_TIMER_IF_CTRL_REG, OMAP_TIMER_CTRL_POSTED);
+ timer->context.tsicr = OMAP_TIMER_CTRL_POSTED;
+ timer->posted = OMAP_TIMER_POSTED;
+}
+
+static inline void __omap_dm_timer_stop(struct dmtimer *timer)
+{
+ u32 l;
+
+ l = dmtimer_read(timer, OMAP_TIMER_CTRL_REG);
+ if (l & OMAP_TIMER_CTRL_ST) {
+ l &= ~0x1;
+ dmtimer_write(timer, OMAP_TIMER_CTRL_REG, l);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+ /* Readback to make sure write has completed */
+ dmtimer_read(timer, OMAP_TIMER_CTRL_REG);
+ /*
+ * Wait for functional clock period x 3.5 to make sure that
+ * timer is stopped
+ */
+ udelay(3500000 / timer->fclk_rate + 1);
+#endif
+ }
+
+ /* Ack possibly pending interrupt */
+ dmtimer_write(timer, timer->irq_stat, OMAP_TIMER_INT_OVERFLOW);
+}
+
+static inline void __omap_dm_timer_int_enable(struct dmtimer *timer,
+ unsigned int value)
+{
+ dmtimer_write(timer, timer->irq_ena, value);
+ dmtimer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value);
+}
+
+static inline unsigned int
+__omap_dm_timer_read_counter(struct dmtimer *timer)
+{
+ return dmtimer_read(timer, OMAP_TIMER_COUNTER_REG);
+}
+
+static inline void __omap_dm_timer_write_status(struct dmtimer *timer,
+ unsigned int value)
+{
+ dmtimer_write(timer, timer->irq_stat, value);
+}
+
+static void omap_timer_restore_context(struct dmtimer *timer)
+{
+ dmtimer_write(timer, OMAP_TIMER_OCP_CFG_OFFSET, timer->context.ocp_cfg);
+
+ dmtimer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, timer->context.twer);
+ dmtimer_write(timer, OMAP_TIMER_COUNTER_REG, timer->context.tcrr);
+ dmtimer_write(timer, OMAP_TIMER_LOAD_REG, timer->context.tldr);
+ dmtimer_write(timer, OMAP_TIMER_MATCH_REG, timer->context.tmar);
+ dmtimer_write(timer, OMAP_TIMER_IF_CTRL_REG, timer->context.tsicr);
+ dmtimer_write(timer, timer->irq_ena, timer->context.tier);
+ dmtimer_write(timer, OMAP_TIMER_CTRL_REG, timer->context.tclr);
+}
+
+static void omap_timer_save_context(struct dmtimer *timer)
+{
+ timer->context.ocp_cfg = dmtimer_read(timer, OMAP_TIMER_OCP_CFG_OFFSET);
+
+ timer->context.tclr = dmtimer_read(timer, OMAP_TIMER_CTRL_REG);
+ timer->context.twer = dmtimer_read(timer, OMAP_TIMER_WAKEUP_EN_REG);
+ timer->context.tldr = dmtimer_read(timer, OMAP_TIMER_LOAD_REG);
+ timer->context.tmar = dmtimer_read(timer, OMAP_TIMER_MATCH_REG);
+ timer->context.tier = dmtimer_read(timer, timer->irq_ena);
+ timer->context.tsicr = dmtimer_read(timer, OMAP_TIMER_IF_CTRL_REG);
+}
+
+static int omap_timer_context_notifier(struct notifier_block *nb,
+ unsigned long cmd, void *v)
+{
+ struct dmtimer *timer;
+
+ timer = container_of(nb, struct dmtimer, nb);
+
+ switch (cmd) {
+ case CPU_CLUSTER_PM_ENTER:
+ if ((timer->capability & OMAP_TIMER_ALWON) ||
+ !atomic_read(&timer->enabled))
+ break;
+ omap_timer_save_context(timer);
+ break;
+ case CPU_CLUSTER_PM_ENTER_FAILED: /* No need to restore context */
+ break;
+ case CPU_CLUSTER_PM_EXIT:
+ if ((timer->capability & OMAP_TIMER_ALWON) ||
+ !atomic_read(&timer->enabled))
+ break;
+ omap_timer_restore_context(timer);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static int omap_timer_fclk_notifier(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct clk_notifier_data *clk_data = data;
+ struct dmtimer *timer = container_of(nb, struct dmtimer, fclk_nb);
+
+ switch (event) {
+ case POST_RATE_CHANGE:
+ timer->fclk_rate = clk_data->new_rate;
+ return NOTIFY_OK;
+ default:
+ return NOTIFY_DONE;
+ }
+}
+
+static int omap_dm_timer_reset(struct dmtimer *timer)
+{
+ u32 l, timeout = 100000;
+
+ if (timer->revision != 1)
+ return -EINVAL;
+
+ dmtimer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
+
+ do {
+ l = dmtimer_read(timer, OMAP_TIMER_V1_SYS_STAT_OFFSET);
+ } while (!l && timeout--);
+
+ if (!timeout) {
+ dev_err(&timer->pdev->dev, "Timer failed to reset\n");
+ return -ETIMEDOUT;
+ }
+
+ /* Configure timer for smart-idle mode */
+ l = dmtimer_read(timer, OMAP_TIMER_OCP_CFG_OFFSET);
+ l |= 0x2 << 0x3;
+ dmtimer_write(timer, OMAP_TIMER_OCP_CFG_OFFSET, l);
+
+ timer->posted = 0;
+
+ return 0;
+}
+
+/*
+ * Functions exposed to PWM and remoteproc drivers via platform_data.
+ * Do not use these in the driver, these will get deprecated and will
+ * will be replaced by Linux generic framework functions such as
+ * chained interrupts and clock framework.
+ */
+static struct dmtimer *to_dmtimer(struct omap_dm_timer *cookie)
+{
+ if (!cookie)
+ return NULL;
+
+ return container_of(cookie, struct dmtimer, cookie);
+}
+
+static int omap_dm_timer_set_source(struct omap_dm_timer *cookie, int source)
+{
+ int ret;
+ const char *parent_name;
+ struct clk *parent;
+ struct dmtimer_platform_data *pdata;
+ struct dmtimer *timer;
+
+ timer = to_dmtimer(cookie);
+ if (unlikely(!timer) || IS_ERR(timer->fclk))
+ return -EINVAL;
+
+ switch (source) {
+ case OMAP_TIMER_SRC_SYS_CLK:
+ parent_name = "timer_sys_ck";
+ break;
+ case OMAP_TIMER_SRC_32_KHZ:
+ parent_name = "timer_32k_ck";
+ break;
+ case OMAP_TIMER_SRC_EXT_CLK:
+ parent_name = "timer_ext_ck";
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ pdata = timer->pdev->dev.platform_data;
+
+ /*
+ * FIXME: Used for OMAP1 devices only because they do not currently
+ * use the clock framework to set the parent clock. To be removed
+ * once OMAP1 migrated to using clock framework for dmtimers
+ */
+ if (timer->omap1 && pdata && pdata->set_timer_src)
+ return pdata->set_timer_src(timer->pdev, source);
+
+#if defined(CONFIG_COMMON_CLK)
+ /* Check if the clock has configurable parents */
+ if (clk_hw_get_num_parents(__clk_get_hw(timer->fclk)) < 2)
+ return 0;
+#endif
+
+ parent = clk_get(&timer->pdev->dev, parent_name);
+ if (IS_ERR(parent)) {
+ pr_err("%s: %s not found\n", __func__, parent_name);
+ return -EINVAL;
+ }
+
+ ret = clk_set_parent(timer->fclk, parent);
+ if (ret < 0)
+ pr_err("%s: failed to set %s as parent\n", __func__,
+ parent_name);
+
+ clk_put(parent);
+
+ return ret;
+}
+
+static void omap_dm_timer_enable(struct omap_dm_timer *cookie)
+{
+ struct dmtimer *timer = to_dmtimer(cookie);
+ struct device *dev = &timer->pdev->dev;
+ int rc;
+
+ rc = pm_runtime_resume_and_get(dev);
+ if (rc)
+ dev_err(dev, "could not enable timer\n");
+}
+
+static void omap_dm_timer_disable(struct omap_dm_timer *cookie)
+{
+ struct dmtimer *timer = to_dmtimer(cookie);
+ struct device *dev = &timer->pdev->dev;
+
+ pm_runtime_put_sync(dev);
+}
+
+static int omap_dm_timer_prepare(struct dmtimer *timer)
+{
+ struct device *dev = &timer->pdev->dev;
+ int rc;
+
+ rc = pm_runtime_resume_and_get(dev);
+ if (rc)
+ return rc;
+
+ if (timer->capability & OMAP_TIMER_NEEDS_RESET) {
+ rc = omap_dm_timer_reset(timer);
+ if (rc) {
+ pm_runtime_put_sync(dev);
+ return rc;
+ }
+ }
+
+ __omap_dm_timer_enable_posted(timer);
+ pm_runtime_put_sync(dev);
+
+ return 0;
+}
+
+static inline u32 omap_dm_timer_reserved_systimer(int id)
+{
+ return (omap_reserved_systimers & (1 << (id - 1))) ? 1 : 0;
+}
+
+static struct dmtimer *_omap_dm_timer_request(int req_type, void *data)
+{
+ struct dmtimer *timer = NULL, *t;
+ struct device_node *np = NULL;
+ unsigned long flags;
+ u32 cap = 0;
+ int id = 0;
+
+ switch (req_type) {
+ case REQUEST_BY_ID:
+ id = *(int *)data;
+ break;
+ case REQUEST_BY_CAP:
+ cap = *(u32 *)data;
+ break;
+ case REQUEST_BY_NODE:
+ np = (struct device_node *)data;
+ break;
+ default:
+ /* REQUEST_ANY */
+ break;
+ }
+
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_for_each_entry(t, &omap_timer_list, node) {
+ if (t->reserved)
+ continue;
+
+ switch (req_type) {
+ case REQUEST_BY_ID:
+ if (id == t->pdev->id) {
+ timer = t;
+ timer->reserved = 1;
+ goto found;
+ }
+ break;
+ case REQUEST_BY_CAP:
+ if (cap == (t->capability & cap)) {
+ /*
+ * If timer is not NULL, we have already found
+ * one timer. But it was not an exact match
+ * because it had more capabilities than what
+ * was required. Therefore, unreserve the last
+ * timer found and see if this one is a better
+ * match.
+ */
+ if (timer)
+ timer->reserved = 0;
+ timer = t;
+ timer->reserved = 1;
+
+ /* Exit loop early if we find an exact match */
+ if (t->capability == cap)
+ goto found;
+ }
+ break;
+ case REQUEST_BY_NODE:
+ if (np == t->pdev->dev.of_node) {
+ timer = t;
+ timer->reserved = 1;
+ goto found;
+ }
+ break;
+ default:
+ /* REQUEST_ANY */
+ timer = t;
+ timer->reserved = 1;
+ goto found;
+ }
+ }
+found:
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ if (timer && omap_dm_timer_prepare(timer)) {
+ timer->reserved = 0;
+ timer = NULL;
+ }
+
+ if (!timer)
+ pr_debug("%s: timer request failed!\n", __func__);
+
+ return timer;
+}
+
+static struct omap_dm_timer *omap_dm_timer_request(void)
+{
+ struct dmtimer *timer;
+
+ timer = _omap_dm_timer_request(REQUEST_ANY, NULL);
+ if (!timer)
+ return NULL;
+
+ return &timer->cookie;
+}
+
+static struct omap_dm_timer *omap_dm_timer_request_specific(int id)
+{
+ struct dmtimer *timer;
+
+ /* Requesting timer by ID is not supported when device tree is used */
+ if (of_have_populated_dt()) {
+ pr_warn("%s: Please use omap_dm_timer_request_by_node()\n",
+ __func__);
+ return NULL;
+ }
+
+ timer = _omap_dm_timer_request(REQUEST_BY_ID, &id);
+ if (!timer)
+ return NULL;
+
+ return &timer->cookie;
+}
+
+/**
+ * omap_dm_timer_request_by_node - Request a timer by device-tree node
+ * @np: Pointer to device-tree timer node
+ *
+ * Request a timer based upon a device node pointer. Returns pointer to
+ * timer handle on success and a NULL pointer on failure.
+ */
+static struct omap_dm_timer *omap_dm_timer_request_by_node(struct device_node *np)
+{
+ struct dmtimer *timer;
+
+ if (!np)
+ return NULL;
+
+ timer = _omap_dm_timer_request(REQUEST_BY_NODE, np);
+ if (!timer)
+ return NULL;
+
+ return &timer->cookie;
+}
+
+static int omap_dm_timer_free(struct omap_dm_timer *cookie)
+{
+ struct dmtimer *timer;
+ struct device *dev;
+ int rc;
+
+ timer = to_dmtimer(cookie);
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ WARN_ON(!timer->reserved);
+ timer->reserved = 0;
+
+ dev = &timer->pdev->dev;
+ rc = pm_runtime_resume_and_get(dev);
+ if (rc)
+ return rc;
+
+ /* Clear timer configuration */
+ dmtimer_write(timer, OMAP_TIMER_CTRL_REG, 0);
+
+ pm_runtime_put_sync(dev);
+
+ return 0;
+}
+
+static int omap_dm_timer_get_irq(struct omap_dm_timer *cookie)
+{
+ struct dmtimer *timer = to_dmtimer(cookie);
+ if (timer)
+ return timer->irq;
+ return -EINVAL;
+}
+
+#if defined(CONFIG_ARCH_OMAP1)
+#include <linux/soc/ti/omap1-io.h>
+
+static struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *cookie)
+{
+ return NULL;
+}
+
+/**
+ * omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR
+ * @inputmask: current value of idlect mask
+ */
+__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
+{
+ int i = 0;
+ struct dmtimer *timer = NULL;
+ unsigned long flags;
+
+ /* If ARMXOR cannot be idled this function call is unnecessary */
+ if (!(inputmask & (1 << 1)))
+ return inputmask;
+
+ /* If any active timer is using ARMXOR return modified mask */
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_for_each_entry(timer, &omap_timer_list, node) {
+ u32 l;
+
+ l = dmtimer_read(timer, OMAP_TIMER_CTRL_REG);
+ if (l & OMAP_TIMER_CTRL_ST) {
+ if (((omap_readl(MOD_CONF_CTRL_1) >> (i * 2)) & 0x03) == 0)
+ inputmask &= ~(1 << 1);
+ else
+ inputmask &= ~(1 << 2);
+ }
+ i++;
+ }
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ return inputmask;
+}
+
+#else
+
+static struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *cookie)
+{
+ struct dmtimer *timer = to_dmtimer(cookie);
+
+ if (timer && !IS_ERR(timer->fclk))
+ return timer->fclk;
+ return NULL;
+}
+
+__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
+{
+ BUG();
+
+ return 0;
+}
+
+#endif
+
+static int omap_dm_timer_start(struct omap_dm_timer *cookie)
+{
+ struct dmtimer *timer;
+ struct device *dev;
+ int rc;
+ u32 l;
+
+ timer = to_dmtimer(cookie);
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ dev = &timer->pdev->dev;
+
+ rc = pm_runtime_resume_and_get(dev);
+ if (rc)
+ return rc;
+
+ l = dmtimer_read(timer, OMAP_TIMER_CTRL_REG);
+ if (!(l & OMAP_TIMER_CTRL_ST)) {
+ l |= OMAP_TIMER_CTRL_ST;
+ dmtimer_write(timer, OMAP_TIMER_CTRL_REG, l);
+ }
+
+ return 0;
+}
+
+static int omap_dm_timer_stop(struct omap_dm_timer *cookie)
+{
+ struct dmtimer *timer;
+ struct device *dev;
+
+ timer = to_dmtimer(cookie);
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ dev = &timer->pdev->dev;
+
+ __omap_dm_timer_stop(timer);
+
+ pm_runtime_put_sync(dev);
+
+ return 0;
+}
+
+static int omap_dm_timer_set_load(struct omap_dm_timer *cookie,
+ unsigned int load)
+{
+ struct dmtimer *timer;
+ struct device *dev;
+ int rc;
+
+ timer = to_dmtimer(cookie);
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ dev = &timer->pdev->dev;
+ rc = pm_runtime_resume_and_get(dev);
+ if (rc)
+ return rc;
+
+ dmtimer_write(timer, OMAP_TIMER_LOAD_REG, load);
+
+ pm_runtime_put_sync(dev);
+
+ return 0;
+}
+
+static int omap_dm_timer_set_match(struct omap_dm_timer *cookie, int enable,
+ unsigned int match)
+{
+ struct dmtimer *timer;
+ struct device *dev;
+ int rc;
+ u32 l;
+
+ timer = to_dmtimer(cookie);
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ dev = &timer->pdev->dev;
+ rc = pm_runtime_resume_and_get(dev);
+ if (rc)
+ return rc;
+
+ l = dmtimer_read(timer, OMAP_TIMER_CTRL_REG);
+ if (enable)
+ l |= OMAP_TIMER_CTRL_CE;
+ else
+ l &= ~OMAP_TIMER_CTRL_CE;
+ dmtimer_write(timer, OMAP_TIMER_MATCH_REG, match);
+ dmtimer_write(timer, OMAP_TIMER_CTRL_REG, l);
+
+ pm_runtime_put_sync(dev);
+
+ return 0;
+}
+
+static int omap_dm_timer_set_pwm(struct omap_dm_timer *cookie, int def_on,
+ int toggle, int trigger, int autoreload)
+{
+ struct dmtimer *timer;
+ struct device *dev;
+ int rc;
+ u32 l;
+
+ timer = to_dmtimer(cookie);
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ dev = &timer->pdev->dev;
+ rc = pm_runtime_resume_and_get(dev);
+ if (rc)
+ return rc;
+
+ l = dmtimer_read(timer, OMAP_TIMER_CTRL_REG);
+ l &= ~(OMAP_TIMER_CTRL_GPOCFG | OMAP_TIMER_CTRL_SCPWM |
+ OMAP_TIMER_CTRL_PT | (0x03 << 10) | OMAP_TIMER_CTRL_AR);
+ if (def_on)
+ l |= OMAP_TIMER_CTRL_SCPWM;
+ if (toggle)
+ l |= OMAP_TIMER_CTRL_PT;
+ l |= trigger << 10;
+ if (autoreload)
+ l |= OMAP_TIMER_CTRL_AR;
+ dmtimer_write(timer, OMAP_TIMER_CTRL_REG, l);
+
+ pm_runtime_put_sync(dev);
+
+ return 0;
+}
+
+static int omap_dm_timer_get_pwm_status(struct omap_dm_timer *cookie)
+{
+ struct dmtimer *timer;
+ struct device *dev;
+ int rc;
+ u32 l;
+
+ timer = to_dmtimer(cookie);
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ dev = &timer->pdev->dev;
+ rc = pm_runtime_resume_and_get(dev);
+ if (rc)
+ return rc;
+
+ l = dmtimer_read(timer, OMAP_TIMER_CTRL_REG);
+
+ pm_runtime_put_sync(dev);
+
+ return l;
+}
+
+static int omap_dm_timer_set_prescaler(struct omap_dm_timer *cookie,
+ int prescaler)
+{
+ struct dmtimer *timer;
+ struct device *dev;
+ int rc;
+ u32 l;
+
+ timer = to_dmtimer(cookie);
+ if (unlikely(!timer) || prescaler < -1 || prescaler > 7)
+ return -EINVAL;
+
+ dev = &timer->pdev->dev;
+ rc = pm_runtime_resume_and_get(dev);
+ if (rc)
+ return rc;
+
+ l = dmtimer_read(timer, OMAP_TIMER_CTRL_REG);
+ l &= ~(OMAP_TIMER_CTRL_PRE | (0x07 << 2));
+ if (prescaler >= 0) {
+ l |= OMAP_TIMER_CTRL_PRE;
+ l |= prescaler << 2;
+ }
+ dmtimer_write(timer, OMAP_TIMER_CTRL_REG, l);
+
+ pm_runtime_put_sync(dev);
+
+ return 0;
+}
+
+static int omap_dm_timer_set_int_enable(struct omap_dm_timer *cookie,
+ unsigned int value)
+{
+ struct dmtimer *timer;
+ struct device *dev;
+ int rc;
+
+ timer = to_dmtimer(cookie);
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ dev = &timer->pdev->dev;
+ rc = pm_runtime_resume_and_get(dev);
+ if (rc)
+ return rc;
+
+ __omap_dm_timer_int_enable(timer, value);
+
+ pm_runtime_put_sync(dev);
+
+ return 0;
+}
+
+/**
+ * omap_dm_timer_set_int_disable - disable timer interrupts
+ * @cookie: pointer to timer cookie
+ * @mask: bit mask of interrupts to be disabled
+ *
+ * Disables the specified timer interrupts for a timer.
+ */
+static int omap_dm_timer_set_int_disable(struct omap_dm_timer *cookie, u32 mask)
+{
+ struct dmtimer *timer;
+ struct device *dev;
+ u32 l = mask;
+ int rc;
+
+ timer = to_dmtimer(cookie);
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ dev = &timer->pdev->dev;
+ rc = pm_runtime_resume_and_get(dev);
+ if (rc)
+ return rc;
+
+ if (timer->revision == 1)
+ l = dmtimer_read(timer, timer->irq_ena) & ~mask;
+
+ dmtimer_write(timer, timer->irq_dis, l);
+ l = dmtimer_read(timer, OMAP_TIMER_WAKEUP_EN_REG) & ~mask;
+ dmtimer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, l);
+
+ pm_runtime_put_sync(dev);
+
+ return 0;
+}
+
+static unsigned int omap_dm_timer_read_status(struct omap_dm_timer *cookie)
+{
+ struct dmtimer *timer;
+ unsigned int l;
+
+ timer = to_dmtimer(cookie);
+ if (unlikely(!timer || !atomic_read(&timer->enabled))) {
+ pr_err("%s: timer not available or enabled.\n", __func__);
+ return 0;
+ }
+
+ l = dmtimer_read(timer, timer->irq_stat);
+
+ return l;
+}
+
+static int omap_dm_timer_write_status(struct omap_dm_timer *cookie, unsigned int value)
+{
+ struct dmtimer *timer;
+
+ timer = to_dmtimer(cookie);
+ if (unlikely(!timer || !atomic_read(&timer->enabled)))
+ return -EINVAL;
+
+ __omap_dm_timer_write_status(timer, value);
+
+ return 0;
+}
+
+static unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *cookie)
+{
+ struct dmtimer *timer;
+
+ timer = to_dmtimer(cookie);
+ if (unlikely(!timer || !atomic_read(&timer->enabled))) {
+ pr_err("%s: timer not iavailable or enabled.\n", __func__);
+ return 0;
+ }
+
+ return __omap_dm_timer_read_counter(timer);
+}
+
+static int omap_dm_timer_write_counter(struct omap_dm_timer *cookie, unsigned int value)
+{
+ struct dmtimer *timer;
+
+ timer = to_dmtimer(cookie);
+ if (unlikely(!timer || !atomic_read(&timer->enabled))) {
+ pr_err("%s: timer not available or enabled.\n", __func__);
+ return -EINVAL;
+ }
+
+ dmtimer_write(timer, OMAP_TIMER_COUNTER_REG, value);
+
+ /* Save the context */
+ timer->context.tcrr = value;
+ return 0;
+}
+
+static int __maybe_unused omap_dm_timer_runtime_suspend(struct device *dev)
+{
+ struct dmtimer *timer = dev_get_drvdata(dev);
+
+ atomic_set(&timer->enabled, 0);
+
+ if (timer->capability & OMAP_TIMER_ALWON || !timer->func_base)
+ return 0;
+
+ omap_timer_save_context(timer);
+
+ return 0;
+}
+
+static int __maybe_unused omap_dm_timer_runtime_resume(struct device *dev)
+{
+ struct dmtimer *timer = dev_get_drvdata(dev);
+
+ if (!(timer->capability & OMAP_TIMER_ALWON) && timer->func_base)
+ omap_timer_restore_context(timer);
+
+ atomic_set(&timer->enabled, 1);
+
+ return 0;
+}
+
+static const struct dev_pm_ops omap_dm_timer_pm_ops = {
+ SET_RUNTIME_PM_OPS(omap_dm_timer_runtime_suspend,
+ omap_dm_timer_runtime_resume, NULL)
+};
+
+static const struct of_device_id omap_timer_match[];
+
+/**
+ * omap_dm_timer_probe - probe function called for every registered device
+ * @pdev: pointer to current timer platform device
+ *
+ * Called by driver framework at the end of device registration for all
+ * timer devices.
+ */
+static int omap_dm_timer_probe(struct platform_device *pdev)
+{
+ unsigned long flags;
+ struct dmtimer *timer;
+ struct device *dev = &pdev->dev;
+ const struct dmtimer_platform_data *pdata;
+ int ret;
+
+ pdata = of_device_get_match_data(dev);
+ if (!pdata)
+ pdata = dev_get_platdata(dev);
+ else
+ dev->platform_data = (void *)pdata;
+
+ if (!pdata) {
+ dev_err(dev, "%s: no platform data.\n", __func__);
+ return -ENODEV;
+ }
+
+ timer = devm_kzalloc(dev, sizeof(*timer), GFP_KERNEL);
+ if (!timer)
+ return -ENOMEM;
+
+ timer->irq = platform_get_irq(pdev, 0);
+ if (timer->irq < 0)
+ return timer->irq;
+
+ timer->io_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(timer->io_base))
+ return PTR_ERR(timer->io_base);
+
+ platform_set_drvdata(pdev, timer);
+
+ if (dev->of_node) {
+ if (of_property_read_bool(dev->of_node, "ti,timer-alwon"))
+ timer->capability |= OMAP_TIMER_ALWON;
+ if (of_property_read_bool(dev->of_node, "ti,timer-dsp"))
+ timer->capability |= OMAP_TIMER_HAS_DSP_IRQ;
+ if (of_property_read_bool(dev->of_node, "ti,timer-pwm"))
+ timer->capability |= OMAP_TIMER_HAS_PWM;
+ if (of_property_read_bool(dev->of_node, "ti,timer-secure"))
+ timer->capability |= OMAP_TIMER_SECURE;
+ } else {
+ timer->id = pdev->id;
+ timer->capability = pdata->timer_capability;
+ timer->reserved = omap_dm_timer_reserved_systimer(timer->id);
+ }
+
+ timer->omap1 = timer->capability & OMAP_TIMER_NEEDS_RESET;
+
+ /* OMAP1 devices do not yet use the clock framework for dmtimers */
+ if (!timer->omap1) {
+ timer->fclk = devm_clk_get(dev, "fck");
+ if (IS_ERR(timer->fclk))
+ return PTR_ERR(timer->fclk);
+
+ timer->fclk_nb.notifier_call = omap_timer_fclk_notifier;
+ ret = devm_clk_notifier_register(dev, timer->fclk,
+ &timer->fclk_nb);
+ if (ret)
+ return ret;
+
+ timer->fclk_rate = clk_get_rate(timer->fclk);
+ } else {
+ timer->fclk = ERR_PTR(-ENODEV);
+ }
+
+ if (!(timer->capability & OMAP_TIMER_ALWON)) {
+ timer->nb.notifier_call = omap_timer_context_notifier;
+ cpu_pm_register_notifier(&timer->nb);
+ }
+
+ timer->errata = pdata->timer_errata;
+
+ timer->pdev = pdev;
+
+ pm_runtime_enable(dev);
+
+ if (!timer->reserved) {
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret) {
+ dev_err(dev, "%s: pm_runtime_get_sync failed!\n",
+ __func__);
+ goto err_disable;
+ }
+ __omap_dm_timer_init_regs(timer);
+
+ /* Clear timer configuration */
+ dmtimer_write(timer, OMAP_TIMER_CTRL_REG, 0);
+
+ pm_runtime_put(dev);
+ }
+
+ /* add the timer element to the list */
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_add_tail(&timer->node, &omap_timer_list);
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ dev_dbg(dev, "Device Probed.\n");
+
+ return 0;
+
+err_disable:
+ pm_runtime_disable(dev);
+ return ret;
+}
+
+/**
+ * omap_dm_timer_remove - cleanup a registered timer device
+ * @pdev: pointer to current timer platform device
+ *
+ * Called by driver framework whenever a timer device is unregistered.
+ * In addition to freeing platform resources it also deletes the timer
+ * entry from the local list.
+ */
+static void omap_dm_timer_remove(struct platform_device *pdev)
+{
+ struct dmtimer *timer;
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_for_each_entry(timer, &omap_timer_list, node)
+ if (!strcmp(dev_name(&timer->pdev->dev),
+ dev_name(&pdev->dev))) {
+ if (!(timer->capability & OMAP_TIMER_ALWON))
+ cpu_pm_unregister_notifier(&timer->nb);
+ list_del(&timer->node);
+ ret = 0;
+ break;
+ }
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ pm_runtime_disable(&pdev->dev);
+
+ if (ret)
+ dev_err(&pdev->dev, "Unable to determine timer entry in list of drivers on remove\n");
+}
+
+static const struct omap_dm_timer_ops dmtimer_ops = {
+ .request_by_node = omap_dm_timer_request_by_node,
+ .request_specific = omap_dm_timer_request_specific,
+ .request = omap_dm_timer_request,
+ .set_source = omap_dm_timer_set_source,
+ .get_irq = omap_dm_timer_get_irq,
+ .set_int_enable = omap_dm_timer_set_int_enable,
+ .set_int_disable = omap_dm_timer_set_int_disable,
+ .free = omap_dm_timer_free,
+ .enable = omap_dm_timer_enable,
+ .disable = omap_dm_timer_disable,
+ .get_fclk = omap_dm_timer_get_fclk,
+ .start = omap_dm_timer_start,
+ .stop = omap_dm_timer_stop,
+ .set_load = omap_dm_timer_set_load,
+ .set_match = omap_dm_timer_set_match,
+ .set_pwm = omap_dm_timer_set_pwm,
+ .get_pwm_status = omap_dm_timer_get_pwm_status,
+ .set_prescaler = omap_dm_timer_set_prescaler,
+ .read_counter = omap_dm_timer_read_counter,
+ .write_counter = omap_dm_timer_write_counter,
+ .read_status = omap_dm_timer_read_status,
+ .write_status = omap_dm_timer_write_status,
+};
+
+static const struct dmtimer_platform_data omap3plus_pdata = {
+ .timer_errata = OMAP_TIMER_ERRATA_I103_I767,
+ .timer_ops = &dmtimer_ops,
+};
+
+static const struct dmtimer_platform_data am6_pdata = {
+ .timer_ops = &dmtimer_ops,
+};
+
+static const struct of_device_id omap_timer_match[] = {
+ {
+ .compatible = "ti,omap2420-timer",
+ },
+ {
+ .compatible = "ti,omap3430-timer",
+ .data = &omap3plus_pdata,
+ },
+ {
+ .compatible = "ti,omap4430-timer",
+ .data = &omap3plus_pdata,
+ },
+ {
+ .compatible = "ti,omap5430-timer",
+ .data = &omap3plus_pdata,
+ },
+ {
+ .compatible = "ti,am335x-timer",
+ .data = &omap3plus_pdata,
+ },
+ {
+ .compatible = "ti,am335x-timer-1ms",
+ .data = &omap3plus_pdata,
+ },
+ {
+ .compatible = "ti,dm816-timer",
+ .data = &omap3plus_pdata,
+ },
+ {
+ .compatible = "ti,am654-timer",
+ .data = &am6_pdata,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, omap_timer_match);
+
+static struct platform_driver omap_dm_timer_driver = {
+ .probe = omap_dm_timer_probe,
+ .remove_new = omap_dm_timer_remove,
+ .driver = {
+ .name = "omap_timer",
+ .of_match_table = omap_timer_match,
+ .pm = &omap_dm_timer_pm_ops,
+ },
+};
+
+module_platform_driver(omap_dm_timer_driver);
+
+MODULE_DESCRIPTION("OMAP Dual-Mode Timer Driver");
+MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/drivers/clocksource/timer-versatile.c b/drivers/clocksource/timer-versatile.c
new file mode 100644
index 0000000000..f5d017b31a
--- /dev/null
+++ b/drivers/clocksource/timer-versatile.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2014 ARM Limited
+ */
+
+#include <linux/clocksource.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/sched_clock.h>
+
+#define SYS_24MHZ 0x05c
+
+static void __iomem *versatile_sys_24mhz;
+
+static u64 notrace versatile_sys_24mhz_read(void)
+{
+ return readl(versatile_sys_24mhz);
+}
+
+static int __init versatile_sched_clock_init(struct device_node *node)
+{
+ void __iomem *base = of_iomap(node, 0);
+
+ of_node_clear_flag(node, OF_POPULATED);
+
+ if (!base)
+ return -ENXIO;
+
+ versatile_sys_24mhz = base + SYS_24MHZ;
+
+ sched_clock_register(versatile_sys_24mhz_read, 32, 24000000);
+
+ return 0;
+}
+TIMER_OF_DECLARE(vexpress, "arm,vexpress-sysreg",
+ versatile_sched_clock_init);
+TIMER_OF_DECLARE(versatile, "arm,versatile-sysreg",
+ versatile_sched_clock_init);
diff --git a/drivers/clocksource/timer-vf-pit.c b/drivers/clocksource/timer-vf-pit.c
new file mode 100644
index 0000000000..911c92146e
--- /dev/null
+++ b/drivers/clocksource/timer-vf-pit.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+/*
+ * Each pit takes 0x10 Bytes register space
+ */
+#define PITMCR 0x00
+#define PIT0_OFFSET 0x100
+#define PITn_OFFSET(n) (PIT0_OFFSET + 0x10 * (n))
+#define PITLDVAL 0x00
+#define PITCVAL 0x04
+#define PITTCTRL 0x08
+#define PITTFLG 0x0c
+
+#define PITMCR_MDIS (0x1 << 1)
+
+#define PITTCTRL_TEN (0x1 << 0)
+#define PITTCTRL_TIE (0x1 << 1)
+#define PITCTRL_CHN (0x1 << 2)
+
+#define PITTFLG_TIF 0x1
+
+static void __iomem *clksrc_base;
+static void __iomem *clkevt_base;
+static unsigned long cycle_per_jiffy;
+
+static inline void pit_timer_enable(void)
+{
+ __raw_writel(PITTCTRL_TEN | PITTCTRL_TIE, clkevt_base + PITTCTRL);
+}
+
+static inline void pit_timer_disable(void)
+{
+ __raw_writel(0, clkevt_base + PITTCTRL);
+}
+
+static inline void pit_irq_acknowledge(void)
+{
+ __raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
+}
+
+static u64 notrace pit_read_sched_clock(void)
+{
+ return ~__raw_readl(clksrc_base + PITCVAL);
+}
+
+static int __init pit_clocksource_init(unsigned long rate)
+{
+ /* set the max load value and start the clock source counter */
+ __raw_writel(0, clksrc_base + PITTCTRL);
+ __raw_writel(~0UL, clksrc_base + PITLDVAL);
+ __raw_writel(PITTCTRL_TEN, clksrc_base + PITTCTRL);
+
+ sched_clock_register(pit_read_sched_clock, 32, rate);
+ return clocksource_mmio_init(clksrc_base + PITCVAL, "vf-pit", rate,
+ 300, 32, clocksource_mmio_readl_down);
+}
+
+static int pit_set_next_event(unsigned long delta,
+ struct clock_event_device *unused)
+{
+ /*
+ * set a new value to PITLDVAL register will not restart the timer,
+ * to abort the current cycle and start a timer period with the new
+ * value, the timer must be disabled and enabled again.
+ * and the PITLAVAL should be set to delta minus one according to pit
+ * hardware requirement.
+ */
+ pit_timer_disable();
+ __raw_writel(delta - 1, clkevt_base + PITLDVAL);
+ pit_timer_enable();
+
+ return 0;
+}
+
+static int pit_shutdown(struct clock_event_device *evt)
+{
+ pit_timer_disable();
+ return 0;
+}
+
+static int pit_set_periodic(struct clock_event_device *evt)
+{
+ pit_set_next_event(cycle_per_jiffy, evt);
+ return 0;
+}
+
+static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ pit_irq_acknowledge();
+
+ /*
+ * pit hardware doesn't support oneshot, it will generate an interrupt
+ * and reload the counter value from PITLDVAL when PITCVAL reach zero,
+ * and start the counter again. So software need to disable the timer
+ * to stop the counter loop in ONESHOT mode.
+ */
+ if (likely(clockevent_state_oneshot(evt)))
+ pit_timer_disable();
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct clock_event_device clockevent_pit = {
+ .name = "VF pit timer",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_shutdown = pit_shutdown,
+ .set_state_periodic = pit_set_periodic,
+ .set_next_event = pit_set_next_event,
+ .rating = 300,
+};
+
+static int __init pit_clockevent_init(unsigned long rate, int irq)
+{
+ __raw_writel(0, clkevt_base + PITTCTRL);
+ __raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
+
+ BUG_ON(request_irq(irq, pit_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+ "VF pit timer", &clockevent_pit));
+
+ clockevent_pit.cpumask = cpumask_of(0);
+ clockevent_pit.irq = irq;
+ /*
+ * The value for the LDVAL register trigger is calculated as:
+ * LDVAL trigger = (period / clock period) - 1
+ * The pit is a 32-bit down count timer, when the counter value
+ * reaches 0, it will generate an interrupt, thus the minimal
+ * LDVAL trigger value is 1. And then the min_delta is
+ * minimal LDVAL trigger value + 1, and the max_delta is full 32-bit.
+ */
+ clockevents_config_and_register(&clockevent_pit, rate, 2, 0xffffffff);
+
+ return 0;
+}
+
+static int __init pit_timer_init(struct device_node *np)
+{
+ struct clk *pit_clk;
+ void __iomem *timer_base;
+ unsigned long clk_rate;
+ int irq, ret;
+
+ timer_base = of_iomap(np, 0);
+ if (!timer_base) {
+ pr_err("Failed to iomap\n");
+ return -ENXIO;
+ }
+
+ /*
+ * PIT0 and PIT1 can be chained to build a 64-bit timer,
+ * so choose PIT2 as clocksource, PIT3 as clockevent device,
+ * and leave PIT0 and PIT1 unused for anyone else who needs them.
+ */
+ clksrc_base = timer_base + PITn_OFFSET(2);
+ clkevt_base = timer_base + PITn_OFFSET(3);
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq <= 0)
+ return -EINVAL;
+
+ pit_clk = of_clk_get(np, 0);
+ if (IS_ERR(pit_clk))
+ return PTR_ERR(pit_clk);
+
+ ret = clk_prepare_enable(pit_clk);
+ if (ret)
+ return ret;
+
+ clk_rate = clk_get_rate(pit_clk);
+ cycle_per_jiffy = clk_rate / (HZ);
+
+ /* enable the pit module */
+ __raw_writel(~PITMCR_MDIS, timer_base + PITMCR);
+
+ ret = pit_clocksource_init(clk_rate);
+ if (ret)
+ return ret;
+
+ return pit_clockevent_init(clk_rate, irq);
+}
+TIMER_OF_DECLARE(vf610, "fsl,vf610-pit", pit_timer_init);
diff --git a/drivers/clocksource/timer-vt8500.c b/drivers/clocksource/timer-vt8500.c
new file mode 100644
index 0000000000..a469b1b5f9
--- /dev/null
+++ b/drivers/clocksource/timer-vt8500.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/mach-vt8500/timer.c
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ */
+
+/*
+ * This file is copied and modified from the original timer.c provided by
+ * Alexey Charkov. Minor changes have been made for Device Tree Support.
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define VT8500_TIMER_OFFSET 0x0100
+#define VT8500_TIMER_HZ 3000000
+#define TIMER_MATCH_VAL 0x0000
+#define TIMER_COUNT_VAL 0x0010
+#define TIMER_STATUS_VAL 0x0014
+#define TIMER_IER_VAL 0x001c /* interrupt enable */
+#define TIMER_CTRL_VAL 0x0020
+#define TIMER_AS_VAL 0x0024 /* access status */
+#define TIMER_COUNT_R_ACTIVE (1 << 5) /* not ready for read */
+#define TIMER_COUNT_W_ACTIVE (1 << 4) /* not ready for write */
+#define TIMER_MATCH_W_ACTIVE (1 << 0) /* not ready for write */
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+#define MIN_OSCR_DELTA 16
+
+static void __iomem *regbase;
+
+static u64 vt8500_timer_read(struct clocksource *cs)
+{
+ int loops = msecs_to_loops(10);
+ writel(3, regbase + TIMER_CTRL_VAL);
+ while ((readl((regbase + TIMER_AS_VAL)) & TIMER_COUNT_R_ACTIVE)
+ && --loops)
+ cpu_relax();
+ return readl(regbase + TIMER_COUNT_VAL);
+}
+
+static struct clocksource clocksource = {
+ .name = "vt8500_timer",
+ .rating = 200,
+ .read = vt8500_timer_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int vt8500_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ int loops = msecs_to_loops(10);
+ u64 alarm = clocksource.read(&clocksource) + cycles;
+ while ((readl(regbase + TIMER_AS_VAL) & TIMER_MATCH_W_ACTIVE)
+ && --loops)
+ cpu_relax();
+ writel((unsigned long)alarm, regbase + TIMER_MATCH_VAL);
+
+ if ((signed)(alarm - clocksource.read(&clocksource)) <= MIN_OSCR_DELTA)
+ return -ETIME;
+
+ writel(1, regbase + TIMER_IER_VAL);
+
+ return 0;
+}
+
+static int vt8500_shutdown(struct clock_event_device *evt)
+{
+ writel(readl(regbase + TIMER_CTRL_VAL) | 1, regbase + TIMER_CTRL_VAL);
+ writel(0, regbase + TIMER_IER_VAL);
+ return 0;
+}
+
+static struct clock_event_device clockevent = {
+ .name = "vt8500_timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .set_next_event = vt8500_timer_set_next_event,
+ .set_state_shutdown = vt8500_shutdown,
+ .set_state_oneshot = vt8500_shutdown,
+};
+
+static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ writel(0xf, regbase + TIMER_STATUS_VAL);
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static int __init vt8500_timer_init(struct device_node *np)
+{
+ int timer_irq, ret;
+
+ regbase = of_iomap(np, 0);
+ if (!regbase) {
+ pr_err("%s: Missing iobase description in Device Tree\n",
+ __func__);
+ return -ENXIO;
+ }
+
+ timer_irq = irq_of_parse_and_map(np, 0);
+ if (!timer_irq) {
+ pr_err("%s: Missing irq description in Device Tree\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ writel(1, regbase + TIMER_CTRL_VAL);
+ writel(0xf, regbase + TIMER_STATUS_VAL);
+ writel(~0, regbase + TIMER_MATCH_VAL);
+
+ ret = clocksource_register_hz(&clocksource, VT8500_TIMER_HZ);
+ if (ret) {
+ pr_err("%s: clocksource_register failed for %s\n",
+ __func__, clocksource.name);
+ return ret;
+ }
+
+ clockevent.cpumask = cpumask_of(0);
+
+ ret = request_irq(timer_irq, vt8500_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "vt8500_timer",
+ &clockevent);
+ if (ret) {
+ pr_err("%s: setup_irq failed for %s\n", __func__,
+ clockevent.name);
+ return ret;
+ }
+
+ clockevents_config_and_register(&clockevent, VT8500_TIMER_HZ,
+ MIN_OSCR_DELTA * 2, 0xf0000000);
+
+ return 0;
+}
+
+TIMER_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init);
diff --git a/drivers/clocksource/timer-zevio.c b/drivers/clocksource/timer-zevio.c
new file mode 100644
index 0000000000..ecaa356884
--- /dev/null
+++ b/drivers/clocksource/timer-zevio.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/drivers/clocksource/zevio-timer.c
+ *
+ * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+#define IO_CURRENT_VAL 0x00
+#define IO_DIVIDER 0x04
+#define IO_CONTROL 0x08
+
+#define IO_TIMER1 0x00
+#define IO_TIMER2 0x0C
+
+#define IO_MATCH_BEGIN 0x18
+#define IO_MATCH(x) (IO_MATCH_BEGIN + ((x) << 2))
+
+#define IO_INTR_STS 0x00
+#define IO_INTR_ACK 0x00
+#define IO_INTR_MSK 0x04
+
+#define CNTL_STOP_TIMER (1 << 4)
+#define CNTL_RUN_TIMER (0 << 4)
+
+#define CNTL_INC (1 << 3)
+#define CNTL_DEC (0 << 3)
+
+#define CNTL_TOZERO 0
+#define CNTL_MATCH(x) ((x) + 1)
+#define CNTL_FOREVER 7
+
+/* There are 6 match registers but we only use one. */
+#define TIMER_MATCH 0
+
+#define TIMER_INTR_MSK (1 << (TIMER_MATCH))
+#define TIMER_INTR_ALL 0x3F
+
+struct zevio_timer {
+ void __iomem *base;
+ void __iomem *timer1, *timer2;
+ void __iomem *interrupt_regs;
+
+ struct clk *clk;
+ struct clock_event_device clkevt;
+
+ char clocksource_name[64];
+ char clockevent_name[64];
+};
+
+static int zevio_timer_set_event(unsigned long delta,
+ struct clock_event_device *dev)
+{
+ struct zevio_timer *timer = container_of(dev, struct zevio_timer,
+ clkevt);
+
+ writel(delta, timer->timer1 + IO_CURRENT_VAL);
+ writel(CNTL_RUN_TIMER | CNTL_DEC | CNTL_MATCH(TIMER_MATCH),
+ timer->timer1 + IO_CONTROL);
+
+ return 0;
+}
+
+static int zevio_timer_shutdown(struct clock_event_device *dev)
+{
+ struct zevio_timer *timer = container_of(dev, struct zevio_timer,
+ clkevt);
+
+ /* Disable timer interrupts */
+ writel(0, timer->interrupt_regs + IO_INTR_MSK);
+ writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
+ /* Stop timer */
+ writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
+ return 0;
+}
+
+static int zevio_timer_set_oneshot(struct clock_event_device *dev)
+{
+ struct zevio_timer *timer = container_of(dev, struct zevio_timer,
+ clkevt);
+
+ /* Enable timer interrupts */
+ writel(TIMER_INTR_MSK, timer->interrupt_regs + IO_INTR_MSK);
+ writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
+ return 0;
+}
+
+static irqreturn_t zevio_timer_interrupt(int irq, void *dev_id)
+{
+ struct zevio_timer *timer = dev_id;
+ u32 intr;
+
+ intr = readl(timer->interrupt_regs + IO_INTR_ACK);
+ if (!(intr & TIMER_INTR_MSK))
+ return IRQ_NONE;
+
+ writel(TIMER_INTR_MSK, timer->interrupt_regs + IO_INTR_ACK);
+ writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
+
+ if (timer->clkevt.event_handler)
+ timer->clkevt.event_handler(&timer->clkevt);
+
+ return IRQ_HANDLED;
+}
+
+static int __init zevio_timer_add(struct device_node *node)
+{
+ struct zevio_timer *timer;
+ struct resource res;
+ int irqnr, ret;
+
+ timer = kzalloc(sizeof(*timer), GFP_KERNEL);
+ if (!timer)
+ return -ENOMEM;
+
+ timer->base = of_iomap(node, 0);
+ if (!timer->base) {
+ ret = -EINVAL;
+ goto error_free;
+ }
+ timer->timer1 = timer->base + IO_TIMER1;
+ timer->timer2 = timer->base + IO_TIMER2;
+
+ timer->clk = of_clk_get(node, 0);
+ if (IS_ERR(timer->clk)) {
+ ret = PTR_ERR(timer->clk);
+ pr_err("Timer clock not found! (error %d)\n", ret);
+ goto error_unmap;
+ }
+
+ timer->interrupt_regs = of_iomap(node, 1);
+ irqnr = irq_of_parse_and_map(node, 0);
+
+ of_address_to_resource(node, 0, &res);
+ scnprintf(timer->clocksource_name, sizeof(timer->clocksource_name),
+ "%llx.%pOFn_clocksource",
+ (unsigned long long)res.start, node);
+
+ scnprintf(timer->clockevent_name, sizeof(timer->clockevent_name),
+ "%llx.%pOFn_clockevent",
+ (unsigned long long)res.start, node);
+
+ if (timer->interrupt_regs && irqnr) {
+ timer->clkevt.name = timer->clockevent_name;
+ timer->clkevt.set_next_event = zevio_timer_set_event;
+ timer->clkevt.set_state_shutdown = zevio_timer_shutdown;
+ timer->clkevt.set_state_oneshot = zevio_timer_set_oneshot;
+ timer->clkevt.tick_resume = zevio_timer_set_oneshot;
+ timer->clkevt.rating = 200;
+ timer->clkevt.cpumask = cpu_possible_mask;
+ timer->clkevt.features = CLOCK_EVT_FEAT_ONESHOT;
+ timer->clkevt.irq = irqnr;
+
+ writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
+ writel(0, timer->timer1 + IO_DIVIDER);
+
+ /* Start with timer interrupts disabled */
+ writel(0, timer->interrupt_regs + IO_INTR_MSK);
+ writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
+
+ /* Interrupt to occur when timer value matches 0 */
+ writel(0, timer->base + IO_MATCH(TIMER_MATCH));
+
+ if (request_irq(irqnr, zevio_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL,
+ timer->clockevent_name, timer)) {
+ pr_err("%s: request_irq() failed\n",
+ timer->clockevent_name);
+ }
+
+ clockevents_config_and_register(&timer->clkevt,
+ clk_get_rate(timer->clk), 0x0001, 0xffff);
+ pr_info("Added %s as clockevent\n", timer->clockevent_name);
+ }
+
+ writel(CNTL_STOP_TIMER, timer->timer2 + IO_CONTROL);
+ writel(0, timer->timer2 + IO_CURRENT_VAL);
+ writel(0, timer->timer2 + IO_DIVIDER);
+ writel(CNTL_RUN_TIMER | CNTL_FOREVER | CNTL_INC,
+ timer->timer2 + IO_CONTROL);
+
+ clocksource_mmio_init(timer->timer2 + IO_CURRENT_VAL,
+ timer->clocksource_name,
+ clk_get_rate(timer->clk),
+ 200, 16,
+ clocksource_mmio_readw_up);
+
+ pr_info("Added %s as clocksource\n", timer->clocksource_name);
+
+ return 0;
+error_unmap:
+ iounmap(timer->base);
+error_free:
+ kfree(timer);
+ return ret;
+}
+
+static int __init zevio_timer_init(struct device_node *node)
+{
+ return zevio_timer_add(node);
+}
+
+TIMER_OF_DECLARE(zevio_timer, "lsi,zevio-timer", zevio_timer_init);