diff options
Diffstat (limited to 'drivers/cpufreq/brcmstb-avs-cpufreq.c')
| -rw-r--r-- | drivers/cpufreq/brcmstb-avs-cpufreq.c | 781 |
1 files changed, 781 insertions, 0 deletions
diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c new file mode 100644 index 0000000000..35fb3a559e --- /dev/null +++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c @@ -0,0 +1,781 @@ +/* + * CPU frequency scaling for Broadcom SoCs with AVS firmware that + * supports DVS or DVFS + * + * Copyright (c) 2016 Broadcom + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * "AVS" is the name of a firmware developed at Broadcom. It derives + * its name from the technique called "Adaptive Voltage Scaling". + * Adaptive voltage scaling was the original purpose of this firmware. + * The AVS firmware still supports "AVS mode", where all it does is + * adaptive voltage scaling. However, on some newer Broadcom SoCs, the + * AVS Firmware, despite its unchanged name, also supports DFS mode and + * DVFS mode. + * + * In the context of this document and the related driver, "AVS" by + * itself always means the Broadcom firmware and never refers to the + * technique called "Adaptive Voltage Scaling". + * + * The Broadcom STB AVS CPUfreq driver provides voltage and frequency + * scaling on Broadcom SoCs using AVS firmware with support for DFS and + * DVFS. The AVS firmware is running on its own co-processor. The + * driver supports both uniprocessor (UP) and symmetric multiprocessor + * (SMP) systems which share clock and voltage across all CPUs. + * + * Actual voltage and frequency scaling is done solely by the AVS + * firmware. This driver does not change frequency or voltage itself. + * It provides a standard CPUfreq interface to the rest of the kernel + * and to userland. It interfaces with the AVS firmware to effect the + * requested changes and to report back the current system status in a + * way that is expected by existing tools. + */ + +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/semaphore.h> + +/* Max number of arguments AVS calls take */ +#define AVS_MAX_CMD_ARGS 4 +/* + * This macro is used to generate AVS parameter register offsets. For + * x >= AVS_MAX_CMD_ARGS, it returns 0 to protect against accidental memory + * access outside of the parameter range. (Offset 0 is the first parameter.) + */ +#define AVS_PARAM_MULT(x) ((x) < AVS_MAX_CMD_ARGS ? (x) : 0) + +/* AVS Mailbox Register offsets */ +#define AVS_MBOX_COMMAND 0x00 +#define AVS_MBOX_STATUS 0x04 +#define AVS_MBOX_VOLTAGE0 0x08 +#define AVS_MBOX_TEMP0 0x0c +#define AVS_MBOX_PV0 0x10 +#define AVS_MBOX_MV0 0x14 +#define AVS_MBOX_PARAM(x) (0x18 + AVS_PARAM_MULT(x) * sizeof(u32)) +#define AVS_MBOX_REVISION 0x28 +#define AVS_MBOX_PSTATE 0x2c +#define AVS_MBOX_HEARTBEAT 0x30 +#define AVS_MBOX_MAGIC 0x34 +#define AVS_MBOX_SIGMA_HVT 0x38 +#define AVS_MBOX_SIGMA_SVT 0x3c +#define AVS_MBOX_VOLTAGE1 0x40 +#define AVS_MBOX_TEMP1 0x44 +#define AVS_MBOX_PV1 0x48 +#define AVS_MBOX_MV1 0x4c +#define AVS_MBOX_FREQUENCY 0x50 + +/* AVS Commands */ +#define AVS_CMD_AVAILABLE 0x00 +#define AVS_CMD_DISABLE 0x10 +#define AVS_CMD_ENABLE 0x11 +#define AVS_CMD_S2_ENTER 0x12 +#define AVS_CMD_S2_EXIT 0x13 +#define AVS_CMD_BBM_ENTER 0x14 +#define AVS_CMD_BBM_EXIT 0x15 +#define AVS_CMD_S3_ENTER 0x16 +#define AVS_CMD_S3_EXIT 0x17 +#define AVS_CMD_BALANCE 0x18 +/* PMAP and P-STATE commands */ +#define AVS_CMD_GET_PMAP 0x30 +#define AVS_CMD_SET_PMAP 0x31 +#define AVS_CMD_GET_PSTATE 0x40 +#define AVS_CMD_SET_PSTATE 0x41 + +/* Different modes AVS supports (for GET_PMAP/SET_PMAP) */ +#define AVS_MODE_AVS 0x0 +#define AVS_MODE_DFS 0x1 +#define AVS_MODE_DVS 0x2 +#define AVS_MODE_DVFS 0x3 + +/* + * PMAP parameter p1 + * unused:31-24, mdiv_p0:23-16, unused:15-14, pdiv:13-10 , ndiv_int:9-0 + */ +#define NDIV_INT_SHIFT 0 +#define NDIV_INT_MASK 0x3ff +#define PDIV_SHIFT 10 +#define PDIV_MASK 0xf +#define MDIV_P0_SHIFT 16 +#define MDIV_P0_MASK 0xff +/* + * PMAP parameter p2 + * mdiv_p4:31-24, mdiv_p3:23-16, mdiv_p2:15:8, mdiv_p1:7:0 + */ +#define MDIV_P1_SHIFT 0 +#define MDIV_P1_MASK 0xff +#define MDIV_P2_SHIFT 8 +#define MDIV_P2_MASK 0xff +#define MDIV_P3_SHIFT 16 +#define MDIV_P3_MASK 0xff +#define MDIV_P4_SHIFT 24 +#define MDIV_P4_MASK 0xff + +/* Different P-STATES AVS supports (for GET_PSTATE/SET_PSTATE) */ +#define AVS_PSTATE_P0 0x0 +#define AVS_PSTATE_P1 0x1 +#define AVS_PSTATE_P2 0x2 +#define AVS_PSTATE_P3 0x3 +#define AVS_PSTATE_P4 0x4 +#define AVS_PSTATE_MAX AVS_PSTATE_P4 + +/* CPU L2 Interrupt Controller Registers */ +#define AVS_CPU_L2_SET0 0x04 +#define AVS_CPU_L2_INT_MASK BIT(31) + +/* AVS Command Status Values */ +#define AVS_STATUS_CLEAR 0x00 +/* Command/notification accepted */ +#define AVS_STATUS_SUCCESS 0xf0 +/* Command/notification rejected */ +#define AVS_STATUS_FAILURE 0xff +/* Invalid command/notification (unknown) */ +#define AVS_STATUS_INVALID 0xf1 +/* Non-AVS modes are not supported */ +#define AVS_STATUS_NO_SUPP 0xf2 +/* Cannot set P-State until P-Map supplied */ +#define AVS_STATUS_NO_MAP 0xf3 +/* Cannot change P-Map after initial P-Map set */ +#define AVS_STATUS_MAP_SET 0xf4 +/* Max AVS status; higher numbers are used for debugging */ +#define AVS_STATUS_MAX 0xff + +/* Other AVS related constants */ +#define AVS_LOOP_LIMIT 10000 +#define AVS_TIMEOUT 300 /* in ms; expected completion is < 10ms */ +#define AVS_FIRMWARE_MAGIC 0xa11600d1 + +#define BRCM_AVS_CPUFREQ_PREFIX "brcmstb-avs" +#define BRCM_AVS_CPUFREQ_NAME BRCM_AVS_CPUFREQ_PREFIX "-cpufreq" +#define BRCM_AVS_CPU_DATA "brcm,avs-cpu-data-mem" +#define BRCM_AVS_CPU_INTR "brcm,avs-cpu-l2-intr" +#define BRCM_AVS_HOST_INTR "sw_intr" + +struct pmap { + unsigned int mode; + unsigned int p1; + unsigned int p2; + unsigned int state; +}; + +struct private_data { + void __iomem *base; + void __iomem *avs_intr_base; + struct device *dev; + struct completion done; + struct semaphore sem; + struct pmap pmap; + int host_irq; +}; + +static void __iomem *__map_region(const char *name) +{ + struct device_node *np; + void __iomem *ptr; + + np = of_find_compatible_node(NULL, NULL, name); + if (!np) + return NULL; + + ptr = of_iomap(np, 0); + of_node_put(np); + + return ptr; +} + +static unsigned long wait_for_avs_command(struct private_data *priv, + unsigned long timeout) +{ + unsigned long time_left = 0; + u32 val; + + /* Event driven, wait for the command interrupt */ + if (priv->host_irq >= 0) + return wait_for_completion_timeout(&priv->done, + msecs_to_jiffies(timeout)); + + /* Polling for command completion */ + do { + time_left = timeout; + val = readl(priv->base + AVS_MBOX_STATUS); + if (val) + break; + + usleep_range(1000, 2000); + } while (--timeout); + + return time_left; +} + +static int __issue_avs_command(struct private_data *priv, unsigned int cmd, + unsigned int num_in, unsigned int num_out, + u32 args[]) +{ + void __iomem *base = priv->base; + unsigned long time_left; + unsigned int i; + int ret; + u32 val; + + ret = down_interruptible(&priv->sem); + if (ret) + return ret; + + /* + * Make sure no other command is currently running: cmd is 0 if AVS + * co-processor is idle. Due to the guard above, we should almost never + * have to wait here. + */ + for (i = 0, val = 1; val != 0 && i < AVS_LOOP_LIMIT; i++) + val = readl(base + AVS_MBOX_COMMAND); + + /* Give the caller a chance to retry if AVS is busy. */ + if (i == AVS_LOOP_LIMIT) { + ret = -EAGAIN; + goto out; + } + + /* Clear status before we begin. */ + writel(AVS_STATUS_CLEAR, base + AVS_MBOX_STATUS); + + /* Provide input parameters */ + for (i = 0; i < num_in; i++) + writel(args[i], base + AVS_MBOX_PARAM(i)); + + /* Protect from spurious interrupts. */ + reinit_completion(&priv->done); + + /* Now issue the command & tell firmware to wake up to process it. */ + writel(cmd, base + AVS_MBOX_COMMAND); + writel(AVS_CPU_L2_INT_MASK, priv->avs_intr_base + AVS_CPU_L2_SET0); + + /* Wait for AVS co-processor to finish processing the command. */ + time_left = wait_for_avs_command(priv, AVS_TIMEOUT); + + /* + * If the AVS status is not in the expected range, it means AVS didn't + * complete our command in time, and we return an error. Also, if there + * is no "time left", we timed out waiting for the interrupt. + */ + val = readl(base + AVS_MBOX_STATUS); + if (time_left == 0 || val == 0 || val > AVS_STATUS_MAX) { + dev_err(priv->dev, "AVS command %#x didn't complete in time\n", + cmd); + dev_err(priv->dev, " Time left: %u ms, AVS status: %#x\n", + jiffies_to_msecs(time_left), val); + ret = -ETIMEDOUT; + goto out; + } + + /* Process returned values */ + for (i = 0; i < num_out; i++) + args[i] = readl(base + AVS_MBOX_PARAM(i)); + + /* Clear status to tell AVS co-processor we are done. */ + writel(AVS_STATUS_CLEAR, base + AVS_MBOX_STATUS); + + /* Convert firmware errors to errno's as much as possible. */ + switch (val) { + case AVS_STATUS_INVALID: + ret = -EINVAL; + break; + case AVS_STATUS_NO_SUPP: + ret = -ENOTSUPP; + break; + case AVS_STATUS_NO_MAP: + ret = -ENOENT; + break; + case AVS_STATUS_MAP_SET: + ret = -EEXIST; + break; + case AVS_STATUS_FAILURE: + ret = -EIO; + break; + } + +out: + up(&priv->sem); + + return ret; +} + +static irqreturn_t irq_handler(int irq, void *data) +{ + struct private_data *priv = data; + + /* AVS command completed execution. Wake up __issue_avs_command(). */ + complete(&priv->done); + + return IRQ_HANDLED; +} + +static char *brcm_avs_mode_to_string(unsigned int mode) +{ + switch (mode) { + case AVS_MODE_AVS: + return "AVS"; + case AVS_MODE_DFS: + return "DFS"; + case AVS_MODE_DVS: + return "DVS"; + case AVS_MODE_DVFS: + return "DVFS"; + } + return NULL; +} + +static void brcm_avs_parse_p1(u32 p1, unsigned int *mdiv_p0, unsigned int *pdiv, + unsigned int *ndiv) +{ + *mdiv_p0 = (p1 >> MDIV_P0_SHIFT) & MDIV_P0_MASK; + *pdiv = (p1 >> PDIV_SHIFT) & PDIV_MASK; + *ndiv = (p1 >> NDIV_INT_SHIFT) & NDIV_INT_MASK; +} + +static void brcm_avs_parse_p2(u32 p2, unsigned int *mdiv_p1, + unsigned int *mdiv_p2, unsigned int *mdiv_p3, + unsigned int *mdiv_p4) +{ + *mdiv_p4 = (p2 >> MDIV_P4_SHIFT) & MDIV_P4_MASK; + *mdiv_p3 = (p2 >> MDIV_P3_SHIFT) & MDIV_P3_MASK; + *mdiv_p2 = (p2 >> MDIV_P2_SHIFT) & MDIV_P2_MASK; + *mdiv_p1 = (p2 >> MDIV_P1_SHIFT) & MDIV_P1_MASK; +} + +static int brcm_avs_get_pmap(struct private_data *priv, struct pmap *pmap) +{ + u32 args[AVS_MAX_CMD_ARGS]; + int ret; + + ret = __issue_avs_command(priv, AVS_CMD_GET_PMAP, 0, 4, args); + if (ret || !pmap) + return ret; + + pmap->mode = args[0]; + pmap->p1 = args[1]; + pmap->p2 = args[2]; + pmap->state = args[3]; + + return 0; +} + +static int brcm_avs_set_pmap(struct private_data *priv, struct pmap *pmap) +{ + u32 args[AVS_MAX_CMD_ARGS]; + + args[0] = pmap->mode; + args[1] = pmap->p1; + args[2] = pmap->p2; + args[3] = pmap->state; + + return __issue_avs_command(priv, AVS_CMD_SET_PMAP, 4, 0, args); +} + +static int brcm_avs_get_pstate(struct private_data *priv, unsigned int *pstate) +{ + u32 args[AVS_MAX_CMD_ARGS]; + int ret; + + ret = __issue_avs_command(priv, AVS_CMD_GET_PSTATE, 0, 1, args); + if (ret) + return ret; + *pstate = args[0]; + + return 0; +} + +static int brcm_avs_set_pstate(struct private_data *priv, unsigned int pstate) +{ + u32 args[AVS_MAX_CMD_ARGS]; + + args[0] = pstate; + + return __issue_avs_command(priv, AVS_CMD_SET_PSTATE, 1, 0, args); + +} + +static u32 brcm_avs_get_voltage(void __iomem *base) +{ + return readl(base + AVS_MBOX_VOLTAGE1); +} + +static u32 brcm_avs_get_frequency(void __iomem *base) +{ + return readl(base + AVS_MBOX_FREQUENCY) * 1000; /* in kHz */ +} + +/* + * We determine which frequencies are supported by cycling through all P-states + * and reading back what frequency we are running at for each P-state. + */ +static struct cpufreq_frequency_table * +brcm_avs_get_freq_table(struct device *dev, struct private_data *priv) +{ + struct cpufreq_frequency_table *table; + unsigned int pstate; + int i, ret; + + /* Remember P-state for later */ + ret = brcm_avs_get_pstate(priv, &pstate); + if (ret) + return ERR_PTR(ret); + + /* + * We allocate space for the 5 different P-STATES AVS, + * plus extra space for a terminating element. + */ + table = devm_kcalloc(dev, AVS_PSTATE_MAX + 1 + 1, sizeof(*table), + GFP_KERNEL); + if (!table) + return ERR_PTR(-ENOMEM); + + for (i = AVS_PSTATE_P0; i <= AVS_PSTATE_MAX; i++) { + ret = brcm_avs_set_pstate(priv, i); + if (ret) + return ERR_PTR(ret); + table[i].frequency = brcm_avs_get_frequency(priv->base); + table[i].driver_data = i; + } + table[i].frequency = CPUFREQ_TABLE_END; + + /* Restore P-state */ + ret = brcm_avs_set_pstate(priv, pstate); + if (ret) + return ERR_PTR(ret); + + return table; +} + +/* + * To ensure the right firmware is running we need to + * - check the MAGIC matches what we expect + * - brcm_avs_get_pmap() doesn't return -ENOTSUPP or -EINVAL + * We need to set up our interrupt handling before calling brcm_avs_get_pmap()! + */ +static bool brcm_avs_is_firmware_loaded(struct private_data *priv) +{ + u32 magic; + int rc; + + rc = brcm_avs_get_pmap(priv, NULL); + magic = readl(priv->base + AVS_MBOX_MAGIC); + + return (magic == AVS_FIRMWARE_MAGIC) && ((rc != -ENOTSUPP) || + (rc != -EINVAL)); +} + +static unsigned int brcm_avs_cpufreq_get(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + struct private_data *priv = policy->driver_data; + + cpufreq_cpu_put(policy); + + return brcm_avs_get_frequency(priv->base); +} + +static int brcm_avs_target_index(struct cpufreq_policy *policy, + unsigned int index) +{ + return brcm_avs_set_pstate(policy->driver_data, + policy->freq_table[index].driver_data); +} + +static int brcm_avs_suspend(struct cpufreq_policy *policy) +{ + struct private_data *priv = policy->driver_data; + int ret; + + ret = brcm_avs_get_pmap(priv, &priv->pmap); + if (ret) + return ret; + + /* + * We can't use the P-state returned by brcm_avs_get_pmap(), since + * that's the initial P-state from when the P-map was downloaded to the + * AVS co-processor, not necessarily the P-state we are running at now. + * So, we get the current P-state explicitly. + */ + ret = brcm_avs_get_pstate(priv, &priv->pmap.state); + if (ret) + return ret; + + /* This is best effort. Nothing to do if it fails. */ + (void)__issue_avs_command(priv, AVS_CMD_S2_ENTER, 0, 0, NULL); + + return 0; +} + +static int brcm_avs_resume(struct cpufreq_policy *policy) +{ + struct private_data *priv = policy->driver_data; + int ret; + + /* This is best effort. Nothing to do if it fails. */ + (void)__issue_avs_command(priv, AVS_CMD_S2_EXIT, 0, 0, NULL); + + ret = brcm_avs_set_pmap(priv, &priv->pmap); + if (ret == -EEXIST) { + struct platform_device *pdev = cpufreq_get_driver_data(); + struct device *dev = &pdev->dev; + + dev_warn(dev, "PMAP was already set\n"); + ret = 0; + } + + return ret; +} + +/* + * All initialization code that we only want to execute once goes here. Setup + * code that can be re-tried on every core (if it failed before) can go into + * brcm_avs_cpufreq_init(). + */ +static int brcm_avs_prepare_init(struct platform_device *pdev) +{ + struct private_data *priv; + struct device *dev; + int ret; + + dev = &pdev->dev; + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + sema_init(&priv->sem, 1); + init_completion(&priv->done); + platform_set_drvdata(pdev, priv); + + priv->base = __map_region(BRCM_AVS_CPU_DATA); + if (!priv->base) { + dev_err(dev, "Couldn't find property %s in device tree.\n", + BRCM_AVS_CPU_DATA); + return -ENOENT; + } + + priv->avs_intr_base = __map_region(BRCM_AVS_CPU_INTR); + if (!priv->avs_intr_base) { + dev_err(dev, "Couldn't find property %s in device tree.\n", + BRCM_AVS_CPU_INTR); + ret = -ENOENT; + goto unmap_base; + } + + priv->host_irq = platform_get_irq_byname(pdev, BRCM_AVS_HOST_INTR); + + ret = devm_request_irq(dev, priv->host_irq, irq_handler, + IRQF_TRIGGER_RISING, + BRCM_AVS_HOST_INTR, priv); + if (ret && priv->host_irq >= 0) { + dev_err(dev, "IRQ request failed: %s (%d) -- %d\n", + BRCM_AVS_HOST_INTR, priv->host_irq, ret); + goto unmap_intr_base; + } + + if (brcm_avs_is_firmware_loaded(priv)) + return 0; + + dev_err(dev, "AVS firmware is not loaded or doesn't support DVFS\n"); + ret = -ENODEV; + +unmap_intr_base: + iounmap(priv->avs_intr_base); +unmap_base: + iounmap(priv->base); + + return ret; +} + +static void brcm_avs_prepare_uninit(struct platform_device *pdev) +{ + struct private_data *priv; + + priv = platform_get_drvdata(pdev); + + iounmap(priv->avs_intr_base); + iounmap(priv->base); +} + +static int brcm_avs_cpufreq_init(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *freq_table; + struct platform_device *pdev; + struct private_data *priv; + struct device *dev; + int ret; + + pdev = cpufreq_get_driver_data(); + priv = platform_get_drvdata(pdev); + policy->driver_data = priv; + dev = &pdev->dev; + + freq_table = brcm_avs_get_freq_table(dev, priv); + if (IS_ERR(freq_table)) { + ret = PTR_ERR(freq_table); + dev_err(dev, "Couldn't determine frequency table (%d).\n", ret); + return ret; + } + + policy->freq_table = freq_table; + + /* All cores share the same clock and thus the same policy. */ + cpumask_setall(policy->cpus); + + ret = __issue_avs_command(priv, AVS_CMD_ENABLE, 0, 0, NULL); + if (!ret) { + unsigned int pstate; + + ret = brcm_avs_get_pstate(priv, &pstate); + if (!ret) { + policy->cur = freq_table[pstate].frequency; + dev_info(dev, "registered\n"); + return 0; + } + } + + dev_err(dev, "couldn't initialize driver (%d)\n", ret); + + return ret; +} + +static ssize_t show_brcm_avs_pstate(struct cpufreq_policy *policy, char *buf) +{ + struct private_data *priv = policy->driver_data; + unsigned int pstate; + + if (brcm_avs_get_pstate(priv, &pstate)) + return sprintf(buf, "<unknown>\n"); + + return sprintf(buf, "%u\n", pstate); +} + +static ssize_t show_brcm_avs_mode(struct cpufreq_policy *policy, char *buf) +{ + struct private_data *priv = policy->driver_data; + struct pmap pmap; + + if (brcm_avs_get_pmap(priv, &pmap)) + return sprintf(buf, "<unknown>\n"); + + return sprintf(buf, "%s %u\n", brcm_avs_mode_to_string(pmap.mode), + pmap.mode); +} + +static ssize_t show_brcm_avs_pmap(struct cpufreq_policy *policy, char *buf) +{ + unsigned int mdiv_p0, mdiv_p1, mdiv_p2, mdiv_p3, mdiv_p4; + struct private_data *priv = policy->driver_data; + unsigned int ndiv, pdiv; + struct pmap pmap; + + if (brcm_avs_get_pmap(priv, &pmap)) + return sprintf(buf, "<unknown>\n"); + + brcm_avs_parse_p1(pmap.p1, &mdiv_p0, &pdiv, &ndiv); + brcm_avs_parse_p2(pmap.p2, &mdiv_p1, &mdiv_p2, &mdiv_p3, &mdiv_p4); + + return sprintf(buf, "0x%08x 0x%08x %u %u %u %u %u %u %u %u %u\n", + pmap.p1, pmap.p2, ndiv, pdiv, mdiv_p0, mdiv_p1, mdiv_p2, + mdiv_p3, mdiv_p4, pmap.mode, pmap.state); +} + +static ssize_t show_brcm_avs_voltage(struct cpufreq_policy *policy, char *buf) +{ + struct private_data *priv = policy->driver_data; + + return sprintf(buf, "0x%08x\n", brcm_avs_get_voltage(priv->base)); +} + +static ssize_t show_brcm_avs_frequency(struct cpufreq_policy *policy, char *buf) +{ + struct private_data *priv = policy->driver_data; + + return sprintf(buf, "0x%08x\n", brcm_avs_get_frequency(priv->base)); +} + +cpufreq_freq_attr_ro(brcm_avs_pstate); +cpufreq_freq_attr_ro(brcm_avs_mode); +cpufreq_freq_attr_ro(brcm_avs_pmap); +cpufreq_freq_attr_ro(brcm_avs_voltage); +cpufreq_freq_attr_ro(brcm_avs_frequency); + +static struct freq_attr *brcm_avs_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + &brcm_avs_pstate, + &brcm_avs_mode, + &brcm_avs_pmap, + &brcm_avs_voltage, + &brcm_avs_frequency, + NULL +}; + +static struct cpufreq_driver brcm_avs_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = brcm_avs_target_index, + .get = brcm_avs_cpufreq_get, + .suspend = brcm_avs_suspend, + .resume = brcm_avs_resume, + .init = brcm_avs_cpufreq_init, + .attr = brcm_avs_cpufreq_attr, + .name = BRCM_AVS_CPUFREQ_PREFIX, +}; + +static int brcm_avs_cpufreq_probe(struct platform_device *pdev) +{ + int ret; + + ret = brcm_avs_prepare_init(pdev); + if (ret) + return ret; + + brcm_avs_driver.driver_data = pdev; + + ret = cpufreq_register_driver(&brcm_avs_driver); + if (ret) + brcm_avs_prepare_uninit(pdev); + + return ret; +} + +static void brcm_avs_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&brcm_avs_driver); + + brcm_avs_prepare_uninit(pdev); +} + +static const struct of_device_id brcm_avs_cpufreq_match[] = { + { .compatible = BRCM_AVS_CPU_DATA }, + { } +}; +MODULE_DEVICE_TABLE(of, brcm_avs_cpufreq_match); + +static struct platform_driver brcm_avs_cpufreq_platdrv = { + .driver = { + .name = BRCM_AVS_CPUFREQ_NAME, + .of_match_table = brcm_avs_cpufreq_match, + }, + .probe = brcm_avs_cpufreq_probe, + .remove_new = brcm_avs_cpufreq_remove, +}; +module_platform_driver(brcm_avs_cpufreq_platdrv); + +MODULE_AUTHOR("Markus Mayer <mmayer@broadcom.com>"); +MODULE_DESCRIPTION("CPUfreq driver for Broadcom STB AVS"); +MODULE_LICENSE("GPL"); |