diff options
Diffstat (limited to 'drivers/dma/pl330.c')
| -rw-r--r-- | drivers/dma/pl330.c | 3277 |
1 files changed, 3277 insertions, 0 deletions
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c new file mode 100644 index 0000000000..3cf0b38387 --- /dev/null +++ b/drivers/dma/pl330.c @@ -0,0 +1,3277 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + */ + +#include <linux/debugfs.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/amba/bus.h> +#include <linux/scatterlist.h> +#include <linux/of.h> +#include <linux/of_dma.h> +#include <linux/err.h> +#include <linux/pm_runtime.h> +#include <linux/bug.h> +#include <linux/reset.h> + +#include "dmaengine.h" +#define PL330_MAX_CHAN 8 +#define PL330_MAX_IRQS 32 +#define PL330_MAX_PERI 32 +#define PL330_MAX_BURST 16 + +#define PL330_QUIRK_BROKEN_NO_FLUSHP BIT(0) +#define PL330_QUIRK_PERIPH_BURST BIT(1) + +enum pl330_cachectrl { + CCTRL0, /* Noncacheable and nonbufferable */ + CCTRL1, /* Bufferable only */ + CCTRL2, /* Cacheable, but do not allocate */ + CCTRL3, /* Cacheable and bufferable, but do not allocate */ + INVALID1, /* AWCACHE = 0x1000 */ + INVALID2, + CCTRL6, /* Cacheable write-through, allocate on writes only */ + CCTRL7, /* Cacheable write-back, allocate on writes only */ +}; + +enum pl330_byteswap { + SWAP_NO, + SWAP_2, + SWAP_4, + SWAP_8, + SWAP_16, +}; + +/* Register and Bit field Definitions */ +#define DS 0x0 +#define DS_ST_STOP 0x0 +#define DS_ST_EXEC 0x1 +#define DS_ST_CMISS 0x2 +#define DS_ST_UPDTPC 0x3 +#define DS_ST_WFE 0x4 +#define DS_ST_ATBRR 0x5 +#define DS_ST_QBUSY 0x6 +#define DS_ST_WFP 0x7 +#define DS_ST_KILL 0x8 +#define DS_ST_CMPLT 0x9 +#define DS_ST_FLTCMP 0xe +#define DS_ST_FAULT 0xf + +#define DPC 0x4 +#define INTEN 0x20 +#define ES 0x24 +#define INTSTATUS 0x28 +#define INTCLR 0x2c +#define FSM 0x30 +#define FSC 0x34 +#define FTM 0x38 + +#define _FTC 0x40 +#define FTC(n) (_FTC + (n)*0x4) + +#define _CS 0x100 +#define CS(n) (_CS + (n)*0x8) +#define CS_CNS (1 << 21) + +#define _CPC 0x104 +#define CPC(n) (_CPC + (n)*0x8) + +#define _SA 0x400 +#define SA(n) (_SA + (n)*0x20) + +#define _DA 0x404 +#define DA(n) (_DA + (n)*0x20) + +#define _CC 0x408 +#define CC(n) (_CC + (n)*0x20) + +#define CC_SRCINC (1 << 0) +#define CC_DSTINC (1 << 14) +#define CC_SRCPRI (1 << 8) +#define CC_DSTPRI (1 << 22) +#define CC_SRCNS (1 << 9) +#define CC_DSTNS (1 << 23) +#define CC_SRCIA (1 << 10) +#define CC_DSTIA (1 << 24) +#define CC_SRCBRSTLEN_SHFT 4 +#define CC_DSTBRSTLEN_SHFT 18 +#define CC_SRCBRSTSIZE_SHFT 1 +#define CC_DSTBRSTSIZE_SHFT 15 +#define CC_SRCCCTRL_SHFT 11 +#define CC_SRCCCTRL_MASK 0x7 +#define CC_DSTCCTRL_SHFT 25 +#define CC_DRCCCTRL_MASK 0x7 +#define CC_SWAP_SHFT 28 + +#define _LC0 0x40c +#define LC0(n) (_LC0 + (n)*0x20) + +#define _LC1 0x410 +#define LC1(n) (_LC1 + (n)*0x20) + +#define DBGSTATUS 0xd00 +#define DBG_BUSY (1 << 0) + +#define DBGCMD 0xd04 +#define DBGINST0 0xd08 +#define DBGINST1 0xd0c + +#define CR0 0xe00 +#define CR1 0xe04 +#define CR2 0xe08 +#define CR3 0xe0c +#define CR4 0xe10 +#define CRD 0xe14 + +#define PERIPH_ID 0xfe0 +#define PERIPH_REV_SHIFT 20 +#define PERIPH_REV_MASK 0xf +#define PERIPH_REV_R0P0 0 +#define PERIPH_REV_R1P0 1 +#define PERIPH_REV_R1P1 2 + +#define CR0_PERIPH_REQ_SET (1 << 0) +#define CR0_BOOT_EN_SET (1 << 1) +#define CR0_BOOT_MAN_NS (1 << 2) +#define CR0_NUM_CHANS_SHIFT 4 +#define CR0_NUM_CHANS_MASK 0x7 +#define CR0_NUM_PERIPH_SHIFT 12 +#define CR0_NUM_PERIPH_MASK 0x1f +#define CR0_NUM_EVENTS_SHIFT 17 +#define CR0_NUM_EVENTS_MASK 0x1f + +#define CR1_ICACHE_LEN_SHIFT 0 +#define CR1_ICACHE_LEN_MASK 0x7 +#define CR1_NUM_ICACHELINES_SHIFT 4 +#define CR1_NUM_ICACHELINES_MASK 0xf + +#define CRD_DATA_WIDTH_SHIFT 0 +#define CRD_DATA_WIDTH_MASK 0x7 +#define CRD_WR_CAP_SHIFT 4 +#define CRD_WR_CAP_MASK 0x7 +#define CRD_WR_Q_DEP_SHIFT 8 +#define CRD_WR_Q_DEP_MASK 0xf +#define CRD_RD_CAP_SHIFT 12 +#define CRD_RD_CAP_MASK 0x7 +#define CRD_RD_Q_DEP_SHIFT 16 +#define CRD_RD_Q_DEP_MASK 0xf +#define CRD_DATA_BUFF_SHIFT 20 +#define CRD_DATA_BUFF_MASK 0x3ff + +#define PART 0x330 +#define DESIGNER 0x41 +#define REVISION 0x0 +#define INTEG_CFG 0x0 +#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12)) + +#define PL330_STATE_STOPPED (1 << 0) +#define PL330_STATE_EXECUTING (1 << 1) +#define PL330_STATE_WFE (1 << 2) +#define PL330_STATE_FAULTING (1 << 3) +#define PL330_STATE_COMPLETING (1 << 4) +#define PL330_STATE_WFP (1 << 5) +#define PL330_STATE_KILLING (1 << 6) +#define PL330_STATE_FAULT_COMPLETING (1 << 7) +#define PL330_STATE_CACHEMISS (1 << 8) +#define PL330_STATE_UPDTPC (1 << 9) +#define PL330_STATE_ATBARRIER (1 << 10) +#define PL330_STATE_QUEUEBUSY (1 << 11) +#define PL330_STATE_INVALID (1 << 15) + +#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \ + | PL330_STATE_WFE | PL330_STATE_FAULTING) + +#define CMD_DMAADDH 0x54 +#define CMD_DMAEND 0x00 +#define CMD_DMAFLUSHP 0x35 +#define CMD_DMAGO 0xa0 +#define CMD_DMALD 0x04 +#define CMD_DMALDP 0x25 +#define CMD_DMALP 0x20 +#define CMD_DMALPEND 0x28 +#define CMD_DMAKILL 0x01 +#define CMD_DMAMOV 0xbc +#define CMD_DMANOP 0x18 +#define CMD_DMARMB 0x12 +#define CMD_DMASEV 0x34 +#define CMD_DMAST 0x08 +#define CMD_DMASTP 0x29 +#define CMD_DMASTZ 0x0c +#define CMD_DMAWFE 0x36 +#define CMD_DMAWFP 0x30 +#define CMD_DMAWMB 0x13 + +#define SZ_DMAADDH 3 +#define SZ_DMAEND 1 +#define SZ_DMAFLUSHP 2 +#define SZ_DMALD 1 +#define SZ_DMALDP 2 +#define SZ_DMALP 2 +#define SZ_DMALPEND 2 +#define SZ_DMAKILL 1 +#define SZ_DMAMOV 6 +#define SZ_DMANOP 1 +#define SZ_DMARMB 1 +#define SZ_DMASEV 2 +#define SZ_DMAST 1 +#define SZ_DMASTP 2 +#define SZ_DMASTZ 1 +#define SZ_DMAWFE 2 +#define SZ_DMAWFP 2 +#define SZ_DMAWMB 1 +#define SZ_DMAGO 6 + +#define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1) +#define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7)) + +#define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr)) +#define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr)) + +/* + * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req + * at 1byte/burst for P<->M and M<->M respectively. + * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req + * should be enough for P<->M and M<->M respectively. + */ +#define MCODE_BUFF_PER_REQ 256 + +/* Use this _only_ to wait on transient states */ +#define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax(); + +#ifdef PL330_DEBUG_MCGEN +static unsigned cmd_line; +#define PL330_DBGCMD_DUMP(off, x...) do { \ + printk("%x:", cmd_line); \ + printk(KERN_CONT x); \ + cmd_line += off; \ + } while (0) +#define PL330_DBGMC_START(addr) (cmd_line = addr) +#else +#define PL330_DBGCMD_DUMP(off, x...) do {} while (0) +#define PL330_DBGMC_START(addr) do {} while (0) +#endif + +/* The number of default descriptors */ + +#define NR_DEFAULT_DESC 16 + +/* Delay for runtime PM autosuspend, ms */ +#define PL330_AUTOSUSPEND_DELAY 20 + +/* Populated by the PL330 core driver for DMA API driver's info */ +struct pl330_config { + u32 periph_id; +#define DMAC_MODE_NS (1 << 0) + unsigned int mode; + unsigned int data_bus_width:10; /* In number of bits */ + unsigned int data_buf_dep:11; + unsigned int num_chan:4; + unsigned int num_peri:6; + u32 peri_ns; + unsigned int num_events:6; + u32 irq_ns; +}; + +/* + * Request Configuration. + * The PL330 core does not modify this and uses the last + * working configuration if the request doesn't provide any. + * + * The Client may want to provide this info only for the + * first request and a request with new settings. + */ +struct pl330_reqcfg { + /* Address Incrementing */ + unsigned dst_inc:1; + unsigned src_inc:1; + + /* + * For now, the SRC & DST protection levels + * and burst size/length are assumed same. + */ + bool nonsecure; + bool privileged; + bool insnaccess; + unsigned brst_len:5; + unsigned brst_size:3; /* in power of 2 */ + + enum pl330_cachectrl dcctl; + enum pl330_cachectrl scctl; + enum pl330_byteswap swap; + struct pl330_config *pcfg; +}; + +/* + * One cycle of DMAC operation. + * There may be more than one xfer in a request. + */ +struct pl330_xfer { + u32 src_addr; + u32 dst_addr; + /* Size to xfer */ + u32 bytes; +}; + +/* The xfer callbacks are made with one of these arguments. */ +enum pl330_op_err { + /* The all xfers in the request were success. */ + PL330_ERR_NONE, + /* If req aborted due to global error. */ + PL330_ERR_ABORT, + /* If req failed due to problem with Channel. */ + PL330_ERR_FAIL, +}; + +enum dmamov_dst { + SAR = 0, + CCR, + DAR, +}; + +enum pl330_dst { + SRC = 0, + DST, +}; + +enum pl330_cond { + SINGLE, + BURST, + ALWAYS, +}; + +struct dma_pl330_desc; + +struct _pl330_req { + u32 mc_bus; + void *mc_cpu; + struct dma_pl330_desc *desc; +}; + +/* ToBeDone for tasklet */ +struct _pl330_tbd { + bool reset_dmac; + bool reset_mngr; + u8 reset_chan; +}; + +/* A DMAC Thread */ +struct pl330_thread { + u8 id; + int ev; + /* If the channel is not yet acquired by any client */ + bool free; + /* Parent DMAC */ + struct pl330_dmac *dmac; + /* Only two at a time */ + struct _pl330_req req[2]; + /* Index of the last enqueued request */ + unsigned lstenq; + /* Index of the last submitted request or -1 if the DMA is stopped */ + int req_running; +}; + +enum pl330_dmac_state { + UNINIT, + INIT, + DYING, +}; + +enum desc_status { + /* In the DMAC pool */ + FREE, + /* + * Allocated to some channel during prep_xxx + * Also may be sitting on the work_list. + */ + PREP, + /* + * Sitting on the work_list and already submitted + * to the PL330 core. Not more than two descriptors + * of a channel can be BUSY at any time. + */ + BUSY, + /* + * Pause was called while descriptor was BUSY. Due to hardware + * limitations, only termination is possible for descriptors + * that have been paused. + */ + PAUSED, + /* + * Sitting on the channel work_list but xfer done + * by PL330 core + */ + DONE, +}; + +struct dma_pl330_chan { + /* Schedule desc completion */ + struct tasklet_struct task; + + /* DMA-Engine Channel */ + struct dma_chan chan; + + /* List of submitted descriptors */ + struct list_head submitted_list; + /* List of issued descriptors */ + struct list_head work_list; + /* List of completed descriptors */ + struct list_head completed_list; + + /* Pointer to the DMAC that manages this channel, + * NULL if the channel is available to be acquired. + * As the parent, this DMAC also provides descriptors + * to the channel. + */ + struct pl330_dmac *dmac; + + /* To protect channel manipulation */ + spinlock_t lock; + + /* + * Hardware channel thread of PL330 DMAC. NULL if the channel is + * available. + */ + struct pl330_thread *thread; + + /* For D-to-M and M-to-D channels */ + int burst_sz; /* the peripheral fifo width */ + int burst_len; /* the number of burst */ + phys_addr_t fifo_addr; + /* DMA-mapped view of the FIFO; may differ if an IOMMU is present */ + dma_addr_t fifo_dma; + enum dma_data_direction dir; + struct dma_slave_config slave_config; + + /* for cyclic capability */ + bool cyclic; + + /* for runtime pm tracking */ + bool active; +}; + +struct pl330_dmac { + /* DMA-Engine Device */ + struct dma_device ddma; + + /* Pool of descriptors available for the DMAC's channels */ + struct list_head desc_pool; + /* To protect desc_pool manipulation */ + spinlock_t pool_lock; + + /* Size of MicroCode buffers for each channel. */ + unsigned mcbufsz; + /* ioremap'ed address of PL330 registers. */ + void __iomem *base; + /* Populated by the PL330 core driver during pl330_add */ + struct pl330_config pcfg; + + spinlock_t lock; + /* Maximum possible events/irqs */ + int events[32]; + /* BUS address of MicroCode buffer */ + dma_addr_t mcode_bus; + /* CPU address of MicroCode buffer */ + void *mcode_cpu; + /* List of all Channel threads */ + struct pl330_thread *channels; + /* Pointer to the MANAGER thread */ + struct pl330_thread *manager; + /* To handle bad news in interrupt */ + struct tasklet_struct tasks; + struct _pl330_tbd dmac_tbd; + /* State of DMAC operation */ + enum pl330_dmac_state state; + /* Holds list of reqs with due callbacks */ + struct list_head req_done; + + /* Peripheral channels connected to this DMAC */ + unsigned int num_peripherals; + struct dma_pl330_chan *peripherals; /* keep at end */ + int quirks; + + struct reset_control *rstc; + struct reset_control *rstc_ocp; +}; + +static struct pl330_of_quirks { + char *quirk; + int id; +} of_quirks[] = { + { + .quirk = "arm,pl330-broken-no-flushp", + .id = PL330_QUIRK_BROKEN_NO_FLUSHP, + }, + { + .quirk = "arm,pl330-periph-burst", + .id = PL330_QUIRK_PERIPH_BURST, + } +}; + +struct dma_pl330_desc { + /* To attach to a queue as child */ + struct list_head node; + + /* Descriptor for the DMA Engine API */ + struct dma_async_tx_descriptor txd; + + /* Xfer for PL330 core */ + struct pl330_xfer px; + + struct pl330_reqcfg rqcfg; + + enum desc_status status; + + int bytes_requested; + bool last; + + /* The channel which currently holds this desc */ + struct dma_pl330_chan *pchan; + + enum dma_transfer_direction rqtype; + /* Index of peripheral for the xfer. */ + unsigned peri:5; + /* Hook to attach to DMAC's list of reqs with due callback */ + struct list_head rqd; +}; + +struct _xfer_spec { + u32 ccr; + struct dma_pl330_desc *desc; +}; + +static int pl330_config_write(struct dma_chan *chan, + struct dma_slave_config *slave_config, + enum dma_transfer_direction direction); + +static inline bool _queue_full(struct pl330_thread *thrd) +{ + return thrd->req[0].desc != NULL && thrd->req[1].desc != NULL; +} + +static inline bool is_manager(struct pl330_thread *thrd) +{ + return thrd->dmac->manager == thrd; +} + +/* If manager of the thread is in Non-Secure mode */ +static inline bool _manager_ns(struct pl330_thread *thrd) +{ + return (thrd->dmac->pcfg.mode & DMAC_MODE_NS) ? true : false; +} + +static inline u32 get_revision(u32 periph_id) +{ + return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK; +} + +static inline u32 _emit_END(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMAEND; + + buf[0] = CMD_DMAEND; + + PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n"); + + return SZ_DMAEND; +} + +static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri) +{ + if (dry_run) + return SZ_DMAFLUSHP; + + buf[0] = CMD_DMAFLUSHP; + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3); + + return SZ_DMAFLUSHP; +} + +static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond) +{ + if (dry_run) + return SZ_DMALD; + + buf[0] = CMD_DMALD; + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (1 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (1 << 0); + + PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); + + return SZ_DMALD; +} + +static inline u32 _emit_LDP(unsigned dry_run, u8 buf[], + enum pl330_cond cond, u8 peri) +{ + if (dry_run) + return SZ_DMALDP; + + buf[0] = CMD_DMALDP; + + if (cond == BURST) + buf[0] |= (1 << 1); + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n", + cond == SINGLE ? 'S' : 'B', peri >> 3); + + return SZ_DMALDP; +} + +static inline u32 _emit_LP(unsigned dry_run, u8 buf[], + unsigned loop, u8 cnt) +{ + if (dry_run) + return SZ_DMALP; + + buf[0] = CMD_DMALP; + + if (loop) + buf[0] |= (1 << 1); + + cnt--; /* DMAC increments by 1 internally */ + buf[1] = cnt; + + PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt); + + return SZ_DMALP; +} + +struct _arg_LPEND { + enum pl330_cond cond; + bool forever; + unsigned loop; + u8 bjump; +}; + +static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[], + const struct _arg_LPEND *arg) +{ + enum pl330_cond cond = arg->cond; + bool forever = arg->forever; + unsigned loop = arg->loop; + u8 bjump = arg->bjump; + + if (dry_run) + return SZ_DMALPEND; + + buf[0] = CMD_DMALPEND; + + if (loop) + buf[0] |= (1 << 2); + + if (!forever) + buf[0] |= (1 << 4); + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (1 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (1 << 0); + + buf[1] = bjump; + + PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n", + forever ? "FE" : "END", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'), + loop ? '1' : '0', + bjump); + + return SZ_DMALPEND; +} + +static inline u32 _emit_KILL(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMAKILL; + + buf[0] = CMD_DMAKILL; + + return SZ_DMAKILL; +} + +static inline u32 _emit_MOV(unsigned dry_run, u8 buf[], + enum dmamov_dst dst, u32 val) +{ + if (dry_run) + return SZ_DMAMOV; + + buf[0] = CMD_DMAMOV; + buf[1] = dst; + buf[2] = val; + buf[3] = val >> 8; + buf[4] = val >> 16; + buf[5] = val >> 24; + + PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n", + dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val); + + return SZ_DMAMOV; +} + +static inline u32 _emit_RMB(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMARMB; + + buf[0] = CMD_DMARMB; + + PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n"); + + return SZ_DMARMB; +} + +static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev) +{ + if (dry_run) + return SZ_DMASEV; + + buf[0] = CMD_DMASEV; + + ev &= 0x1f; + ev <<= 3; + buf[1] = ev; + + PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3); + + return SZ_DMASEV; +} + +static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond) +{ + if (dry_run) + return SZ_DMAST; + + buf[0] = CMD_DMAST; + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (1 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (1 << 0); + + PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); + + return SZ_DMAST; +} + +static inline u32 _emit_STP(unsigned dry_run, u8 buf[], + enum pl330_cond cond, u8 peri) +{ + if (dry_run) + return SZ_DMASTP; + + buf[0] = CMD_DMASTP; + + if (cond == BURST) + buf[0] |= (1 << 1); + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n", + cond == SINGLE ? 'S' : 'B', peri >> 3); + + return SZ_DMASTP; +} + +static inline u32 _emit_WFP(unsigned dry_run, u8 buf[], + enum pl330_cond cond, u8 peri) +{ + if (dry_run) + return SZ_DMAWFP; + + buf[0] = CMD_DMAWFP; + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (0 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (0 << 0); + else + buf[0] |= (0 << 1) | (1 << 0); + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3); + + return SZ_DMAWFP; +} + +static inline u32 _emit_WMB(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMAWMB; + + buf[0] = CMD_DMAWMB; + + PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n"); + + return SZ_DMAWMB; +} + +struct _arg_GO { + u8 chan; + u32 addr; + unsigned ns; +}; + +static inline u32 _emit_GO(unsigned dry_run, u8 buf[], + const struct _arg_GO *arg) +{ + u8 chan = arg->chan; + u32 addr = arg->addr; + unsigned ns = arg->ns; + + if (dry_run) + return SZ_DMAGO; + + buf[0] = CMD_DMAGO; + buf[0] |= (ns << 1); + buf[1] = chan & 0x7; + buf[2] = addr; + buf[3] = addr >> 8; + buf[4] = addr >> 16; + buf[5] = addr >> 24; + + return SZ_DMAGO; +} + +#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) + +/* Returns Time-Out */ +static bool _until_dmac_idle(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->base; + unsigned long loops = msecs_to_loops(5); + + do { + /* Until Manager is Idle */ + if (!(readl(regs + DBGSTATUS) & DBG_BUSY)) + break; + + cpu_relax(); + } while (--loops); + + if (!loops) + return true; + + return false; +} + +static inline void _execute_DBGINSN(struct pl330_thread *thrd, + u8 insn[], bool as_manager) +{ + void __iomem *regs = thrd->dmac->base; + u32 val; + + /* If timed out due to halted state-machine */ + if (_until_dmac_idle(thrd)) { + dev_err(thrd->dmac->ddma.dev, "DMAC halted!\n"); + return; + } + + val = (insn[0] << 16) | (insn[1] << 24); + if (!as_manager) { + val |= (1 << 0); + val |= (thrd->id << 8); /* Channel Number */ + } + writel(val, regs + DBGINST0); + + val = le32_to_cpu(*((__le32 *)&insn[2])); + writel(val, regs + DBGINST1); + + /* Get going */ + writel(0, regs + DBGCMD); +} + +static inline u32 _state(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->base; + u32 val; + + if (is_manager(thrd)) + val = readl(regs + DS) & 0xf; + else + val = readl(regs + CS(thrd->id)) & 0xf; + + switch (val) { + case DS_ST_STOP: + return PL330_STATE_STOPPED; + case DS_ST_EXEC: + return PL330_STATE_EXECUTING; + case DS_ST_CMISS: + return PL330_STATE_CACHEMISS; + case DS_ST_UPDTPC: + return PL330_STATE_UPDTPC; + case DS_ST_WFE: + return PL330_STATE_WFE; + case DS_ST_FAULT: + return PL330_STATE_FAULTING; + case DS_ST_ATBRR: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_ATBARRIER; + case DS_ST_QBUSY: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_QUEUEBUSY; + case DS_ST_WFP: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_WFP; + case DS_ST_KILL: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_KILLING; + case DS_ST_CMPLT: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_COMPLETING; + case DS_ST_FLTCMP: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_FAULT_COMPLETING; + default: + return PL330_STATE_INVALID; + } +} + +static void _stop(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->base; + u8 insn[6] = {0, 0, 0, 0, 0, 0}; + u32 inten = readl(regs + INTEN); + + if (_state(thrd) == PL330_STATE_FAULT_COMPLETING) + UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); + + /* Return if nothing needs to be done */ + if (_state(thrd) == PL330_STATE_COMPLETING + || _state(thrd) == PL330_STATE_KILLING + || _state(thrd) == PL330_STATE_STOPPED) + return; + + _emit_KILL(0, insn); + + _execute_DBGINSN(thrd, insn, is_manager(thrd)); + + /* clear the event */ + if (inten & (1 << thrd->ev)) + writel(1 << thrd->ev, regs + INTCLR); + /* Stop generating interrupts for SEV */ + writel(inten & ~(1 << thrd->ev), regs + INTEN); +} + +/* Start doing req 'idx' of thread 'thrd' */ +static bool _trigger(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->base; + struct _pl330_req *req; + struct dma_pl330_desc *desc; + struct _arg_GO go; + unsigned ns; + u8 insn[6] = {0, 0, 0, 0, 0, 0}; + int idx; + + /* Return if already ACTIVE */ + if (_state(thrd) != PL330_STATE_STOPPED) + return true; + + idx = 1 - thrd->lstenq; + if (thrd->req[idx].desc != NULL) { + req = &thrd->req[idx]; + } else { + idx = thrd->lstenq; + if (thrd->req[idx].desc != NULL) + req = &thrd->req[idx]; + else + req = NULL; + } + + /* Return if no request */ + if (!req) + return true; + + /* Return if req is running */ + if (idx == thrd->req_running) + return true; + + desc = req->desc; + + ns = desc->rqcfg.nonsecure ? 1 : 0; + + /* See 'Abort Sources' point-4 at Page 2-25 */ + if (_manager_ns(thrd) && !ns) + dev_info(thrd->dmac->ddma.dev, "%s:%d Recipe for ABORT!\n", + __func__, __LINE__); + + go.chan = thrd->id; + go.addr = req->mc_bus; + go.ns = ns; + _emit_GO(0, insn, &go); + + /* Set to generate interrupts for SEV */ + writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN); + + /* Only manager can execute GO */ + _execute_DBGINSN(thrd, insn, true); + + thrd->req_running = idx; + + return true; +} + +static bool pl330_start_thread(struct pl330_thread *thrd) +{ + switch (_state(thrd)) { + case PL330_STATE_FAULT_COMPLETING: + UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); + + if (_state(thrd) == PL330_STATE_KILLING) + UNTIL(thrd, PL330_STATE_STOPPED) + fallthrough; + + case PL330_STATE_FAULTING: + _stop(thrd); + fallthrough; + + case PL330_STATE_KILLING: + case PL330_STATE_COMPLETING: + UNTIL(thrd, PL330_STATE_STOPPED) + fallthrough; + + case PL330_STATE_STOPPED: + return _trigger(thrd); + + case PL330_STATE_WFP: + case PL330_STATE_QUEUEBUSY: + case PL330_STATE_ATBARRIER: + case PL330_STATE_UPDTPC: + case PL330_STATE_CACHEMISS: + case PL330_STATE_EXECUTING: + return true; + + case PL330_STATE_WFE: /* For RESUME, nothing yet */ + default: + return false; + } +} + +static inline int _ldst_memtomem(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc) +{ + int off = 0; + struct pl330_config *pcfg = pxs->desc->rqcfg.pcfg; + + /* check lock-up free version */ + if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) { + while (cyc--) { + off += _emit_LD(dry_run, &buf[off], ALWAYS); + off += _emit_ST(dry_run, &buf[off], ALWAYS); + } + } else { + while (cyc--) { + off += _emit_LD(dry_run, &buf[off], ALWAYS); + off += _emit_RMB(dry_run, &buf[off]); + off += _emit_ST(dry_run, &buf[off], ALWAYS); + off += _emit_WMB(dry_run, &buf[off]); + } + } + + return off; +} + +static u32 _emit_load(unsigned int dry_run, u8 buf[], + enum pl330_cond cond, enum dma_transfer_direction direction, + u8 peri) +{ + int off = 0; + + switch (direction) { + case DMA_MEM_TO_MEM: + case DMA_MEM_TO_DEV: + off += _emit_LD(dry_run, &buf[off], cond); + break; + + case DMA_DEV_TO_MEM: + if (cond == ALWAYS) { + off += _emit_LDP(dry_run, &buf[off], SINGLE, + peri); + off += _emit_LDP(dry_run, &buf[off], BURST, + peri); + } else { + off += _emit_LDP(dry_run, &buf[off], cond, + peri); + } + break; + + default: + /* this code should be unreachable */ + WARN_ON(1); + break; + } + + return off; +} + +static inline u32 _emit_store(unsigned int dry_run, u8 buf[], + enum pl330_cond cond, enum dma_transfer_direction direction, + u8 peri) +{ + int off = 0; + + switch (direction) { + case DMA_MEM_TO_MEM: + case DMA_DEV_TO_MEM: + off += _emit_ST(dry_run, &buf[off], cond); + break; + + case DMA_MEM_TO_DEV: + if (cond == ALWAYS) { + off += _emit_STP(dry_run, &buf[off], SINGLE, + peri); + off += _emit_STP(dry_run, &buf[off], BURST, + peri); + } else { + off += _emit_STP(dry_run, &buf[off], cond, + peri); + } + break; + + default: + /* this code should be unreachable */ + WARN_ON(1); + break; + } + + return off; +} + +static inline int _ldst_peripheral(struct pl330_dmac *pl330, + unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc, + enum pl330_cond cond) +{ + int off = 0; + + /* + * do FLUSHP at beginning to clear any stale dma requests before the + * first WFP. + */ + if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP)) + off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri); + while (cyc--) { + off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri); + off += _emit_load(dry_run, &buf[off], cond, pxs->desc->rqtype, + pxs->desc->peri); + off += _emit_store(dry_run, &buf[off], cond, pxs->desc->rqtype, + pxs->desc->peri); + } + + return off; +} + +static int _bursts(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc) +{ + int off = 0; + enum pl330_cond cond = BRST_LEN(pxs->ccr) > 1 ? BURST : SINGLE; + + if (pl330->quirks & PL330_QUIRK_PERIPH_BURST) + cond = BURST; + + switch (pxs->desc->rqtype) { + case DMA_MEM_TO_DEV: + case DMA_DEV_TO_MEM: + off += _ldst_peripheral(pl330, dry_run, &buf[off], pxs, cyc, + cond); + break; + + case DMA_MEM_TO_MEM: + off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc); + break; + + default: + /* this code should be unreachable */ + WARN_ON(1); + break; + } + + return off; +} + +/* + * only the unaligned burst transfers have the dregs. + * so, still transfer dregs with a reduced size burst + * for mem-to-mem, mem-to-dev or dev-to-mem. + */ +static int _dregs(struct pl330_dmac *pl330, unsigned int dry_run, u8 buf[], + const struct _xfer_spec *pxs, int transfer_length) +{ + int off = 0; + int dregs_ccr; + + if (transfer_length == 0) + return off; + + /* + * dregs_len = (total bytes - BURST_TO_BYTE(bursts, ccr)) / + * BRST_SIZE(ccr) + * the dregs len must be smaller than burst len, + * so, for higher efficiency, we can modify CCR + * to use a reduced size burst len for the dregs. + */ + dregs_ccr = pxs->ccr; + dregs_ccr &= ~((0xf << CC_SRCBRSTLEN_SHFT) | + (0xf << CC_DSTBRSTLEN_SHFT)); + dregs_ccr |= (((transfer_length - 1) & 0xf) << + CC_SRCBRSTLEN_SHFT); + dregs_ccr |= (((transfer_length - 1) & 0xf) << + CC_DSTBRSTLEN_SHFT); + + switch (pxs->desc->rqtype) { + case DMA_MEM_TO_DEV: + case DMA_DEV_TO_MEM: + off += _emit_MOV(dry_run, &buf[off], CCR, dregs_ccr); + off += _ldst_peripheral(pl330, dry_run, &buf[off], pxs, 1, + BURST); + break; + + case DMA_MEM_TO_MEM: + off += _emit_MOV(dry_run, &buf[off], CCR, dregs_ccr); + off += _ldst_memtomem(dry_run, &buf[off], pxs, 1); + break; + + default: + /* this code should be unreachable */ + WARN_ON(1); + break; + } + + return off; +} + +/* Returns bytes consumed and updates bursts */ +static inline int _loop(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[], + unsigned long *bursts, const struct _xfer_spec *pxs) +{ + int cyc, cycmax, szlp, szlpend, szbrst, off; + unsigned lcnt0, lcnt1, ljmp0, ljmp1; + struct _arg_LPEND lpend; + + if (*bursts == 1) + return _bursts(pl330, dry_run, buf, pxs, 1); + + /* Max iterations possible in DMALP is 256 */ + if (*bursts >= 256*256) { + lcnt1 = 256; + lcnt0 = 256; + cyc = *bursts / lcnt1 / lcnt0; + } else if (*bursts > 256) { + lcnt1 = 256; + lcnt0 = *bursts / lcnt1; + cyc = 1; + } else { + lcnt1 = *bursts; + lcnt0 = 0; + cyc = 1; + } + + szlp = _emit_LP(1, buf, 0, 0); + szbrst = _bursts(pl330, 1, buf, pxs, 1); + + lpend.cond = ALWAYS; + lpend.forever = false; + lpend.loop = 0; + lpend.bjump = 0; + szlpend = _emit_LPEND(1, buf, &lpend); + + if (lcnt0) { + szlp *= 2; + szlpend *= 2; + } + + /* + * Max bursts that we can unroll due to limit on the + * size of backward jump that can be encoded in DMALPEND + * which is 8-bits and hence 255 + */ + cycmax = (255 - (szlp + szlpend)) / szbrst; + + cyc = (cycmax < cyc) ? cycmax : cyc; + + off = 0; + + if (lcnt0) { + off += _emit_LP(dry_run, &buf[off], 0, lcnt0); + ljmp0 = off; + } + + off += _emit_LP(dry_run, &buf[off], 1, lcnt1); + ljmp1 = off; + + off += _bursts(pl330, dry_run, &buf[off], pxs, cyc); + + lpend.cond = ALWAYS; + lpend.forever = false; + lpend.loop = 1; + lpend.bjump = off - ljmp1; + off += _emit_LPEND(dry_run, &buf[off], &lpend); + + if (lcnt0) { + lpend.cond = ALWAYS; + lpend.forever = false; + lpend.loop = 0; + lpend.bjump = off - ljmp0; + off += _emit_LPEND(dry_run, &buf[off], &lpend); + } + + *bursts = lcnt1 * cyc; + if (lcnt0) + *bursts *= lcnt0; + + return off; +} + +static inline int _setup_loops(struct pl330_dmac *pl330, + unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs) +{ + struct pl330_xfer *x = &pxs->desc->px; + u32 ccr = pxs->ccr; + unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr); + int num_dregs = (x->bytes - BURST_TO_BYTE(bursts, ccr)) / + BRST_SIZE(ccr); + int off = 0; + + while (bursts) { + c = bursts; + off += _loop(pl330, dry_run, &buf[off], &c, pxs); + bursts -= c; + } + off += _dregs(pl330, dry_run, &buf[off], pxs, num_dregs); + + return off; +} + +static inline int _setup_xfer(struct pl330_dmac *pl330, + unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs) +{ + struct pl330_xfer *x = &pxs->desc->px; + int off = 0; + + /* DMAMOV SAR, x->src_addr */ + off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr); + /* DMAMOV DAR, x->dst_addr */ + off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr); + + /* Setup Loop(s) */ + off += _setup_loops(pl330, dry_run, &buf[off], pxs); + + return off; +} + +/* + * A req is a sequence of one or more xfer units. + * Returns the number of bytes taken to setup the MC for the req. + */ +static int _setup_req(struct pl330_dmac *pl330, unsigned dry_run, + struct pl330_thread *thrd, unsigned index, + struct _xfer_spec *pxs) +{ + struct _pl330_req *req = &thrd->req[index]; + u8 *buf = req->mc_cpu; + int off = 0; + + PL330_DBGMC_START(req->mc_bus); + + /* DMAMOV CCR, ccr */ + off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr); + + off += _setup_xfer(pl330, dry_run, &buf[off], pxs); + + /* DMASEV peripheral/event */ + off += _emit_SEV(dry_run, &buf[off], thrd->ev); + /* DMAEND */ + off += _emit_END(dry_run, &buf[off]); + + return off; +} + +static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc) +{ + u32 ccr = 0; + + if (rqc->src_inc) + ccr |= CC_SRCINC; + + if (rqc->dst_inc) + ccr |= CC_DSTINC; + + /* We set same protection levels for Src and DST for now */ + if (rqc->privileged) + ccr |= CC_SRCPRI | CC_DSTPRI; + if (rqc->nonsecure) + ccr |= CC_SRCNS | CC_DSTNS; + if (rqc->insnaccess) + ccr |= CC_SRCIA | CC_DSTIA; + + ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT); + ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT); + + ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT); + ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT); + + ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT); + ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT); + + ccr |= (rqc->swap << CC_SWAP_SHFT); + + return ccr; +} + +/* + * Submit a list of xfers after which the client wants notification. + * Client is not notified after each xfer unit, just once after all + * xfer units are done or some error occurs. + */ +static int pl330_submit_req(struct pl330_thread *thrd, + struct dma_pl330_desc *desc) +{ + struct pl330_dmac *pl330 = thrd->dmac; + struct _xfer_spec xs; + unsigned long flags; + unsigned idx; + u32 ccr; + int ret = 0; + + switch (desc->rqtype) { + case DMA_MEM_TO_DEV: + break; + + case DMA_DEV_TO_MEM: + break; + + case DMA_MEM_TO_MEM: + break; + + default: + return -ENOTSUPP; + } + + if (pl330->state == DYING + || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) { + dev_info(thrd->dmac->ddma.dev, "%s:%d\n", + __func__, __LINE__); + return -EAGAIN; + } + + /* If request for non-existing peripheral */ + if (desc->rqtype != DMA_MEM_TO_MEM && + desc->peri >= pl330->pcfg.num_peri) { + dev_info(thrd->dmac->ddma.dev, + "%s:%d Invalid peripheral(%u)!\n", + __func__, __LINE__, desc->peri); + return -EINVAL; + } + + spin_lock_irqsave(&pl330->lock, flags); + + if (_queue_full(thrd)) { + ret = -EAGAIN; + goto xfer_exit; + } + + /* Prefer Secure Channel */ + if (!_manager_ns(thrd)) + desc->rqcfg.nonsecure = 0; + else + desc->rqcfg.nonsecure = 1; + + ccr = _prepare_ccr(&desc->rqcfg); + + idx = thrd->req[0].desc == NULL ? 0 : 1; + + xs.ccr = ccr; + xs.desc = desc; + + /* First dry run to check if req is acceptable */ + ret = _setup_req(pl330, 1, thrd, idx, &xs); + + if (ret > pl330->mcbufsz / 2) { + dev_info(pl330->ddma.dev, "%s:%d Try increasing mcbufsz (%i/%i)\n", + __func__, __LINE__, ret, pl330->mcbufsz / 2); + ret = -ENOMEM; + goto xfer_exit; + } + + /* Hook the request */ + thrd->lstenq = idx; + thrd->req[idx].desc = desc; + _setup_req(pl330, 0, thrd, idx, &xs); + + ret = 0; + +xfer_exit: + spin_unlock_irqrestore(&pl330->lock, flags); + + return ret; +} + +static void dma_pl330_rqcb(struct dma_pl330_desc *desc, enum pl330_op_err err) +{ + struct dma_pl330_chan *pch; + unsigned long flags; + + if (!desc) + return; + + pch = desc->pchan; + + /* If desc aborted */ + if (!pch) + return; + + spin_lock_irqsave(&pch->lock, flags); + + desc->status = DONE; + + spin_unlock_irqrestore(&pch->lock, flags); + + tasklet_schedule(&pch->task); +} + +static void pl330_dotask(struct tasklet_struct *t) +{ + struct pl330_dmac *pl330 = from_tasklet(pl330, t, tasks); + unsigned long flags; + int i; + + spin_lock_irqsave(&pl330->lock, flags); + + /* The DMAC itself gone nuts */ + if (pl330->dmac_tbd.reset_dmac) { + pl330->state = DYING; + /* Reset the manager too */ + pl330->dmac_tbd.reset_mngr = true; + /* Clear the reset flag */ + pl330->dmac_tbd.reset_dmac = false; + } + + if (pl330->dmac_tbd.reset_mngr) { + _stop(pl330->manager); + /* Reset all channels */ + pl330->dmac_tbd.reset_chan = (1 << pl330->pcfg.num_chan) - 1; + /* Clear the reset flag */ + pl330->dmac_tbd.reset_mngr = false; + } + + for (i = 0; i < pl330->pcfg.num_chan; i++) { + + if (pl330->dmac_tbd.reset_chan & (1 << i)) { + struct pl330_thread *thrd = &pl330->channels[i]; + void __iomem *regs = pl330->base; + enum pl330_op_err err; + + _stop(thrd); + + if (readl(regs + FSC) & (1 << thrd->id)) + err = PL330_ERR_FAIL; + else + err = PL330_ERR_ABORT; + + spin_unlock_irqrestore(&pl330->lock, flags); + dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, err); + dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, err); + spin_lock_irqsave(&pl330->lock, flags); + + thrd->req[0].desc = NULL; + thrd->req[1].desc = NULL; + thrd->req_running = -1; + + /* Clear the reset flag */ + pl330->dmac_tbd.reset_chan &= ~(1 << i); + } + } + + spin_unlock_irqrestore(&pl330->lock, flags); + + return; +} + +/* Returns 1 if state was updated, 0 otherwise */ +static int pl330_update(struct pl330_dmac *pl330) +{ + struct dma_pl330_desc *descdone; + unsigned long flags; + void __iomem *regs; + u32 val; + int id, ev, ret = 0; + + regs = pl330->base; + + spin_lock_irqsave(&pl330->lock, flags); + + val = readl(regs + FSM) & 0x1; + if (val) + pl330->dmac_tbd.reset_mngr = true; + else + pl330->dmac_tbd.reset_mngr = false; + + val = readl(regs + FSC) & ((1 << pl330->pcfg.num_chan) - 1); + pl330->dmac_tbd.reset_chan |= val; + if (val) { + int i = 0; + while (i < pl330->pcfg.num_chan) { + if (val & (1 << i)) { + dev_info(pl330->ddma.dev, + "Reset Channel-%d\t CS-%x FTC-%x\n", + i, readl(regs + CS(i)), + readl(regs + FTC(i))); + _stop(&pl330->channels[i]); + } + i++; + } + } + + /* Check which event happened i.e, thread notified */ + val = readl(regs + ES); + if (pl330->pcfg.num_events < 32 + && val & ~((1 << pl330->pcfg.num_events) - 1)) { + pl330->dmac_tbd.reset_dmac = true; + dev_err(pl330->ddma.dev, "%s:%d Unexpected!\n", __func__, + __LINE__); + ret = 1; + goto updt_exit; + } + + for (ev = 0; ev < pl330->pcfg.num_events; ev++) { + if (val & (1 << ev)) { /* Event occurred */ + struct pl330_thread *thrd; + u32 inten = readl(regs + INTEN); + int active; + + /* Clear the event */ + if (inten & (1 << ev)) + writel(1 << ev, regs + INTCLR); + + ret = 1; + + id = pl330->events[ev]; + + thrd = &pl330->channels[id]; + + active = thrd->req_running; + if (active == -1) /* Aborted */ + continue; + + /* Detach the req */ + descdone = thrd->req[active].desc; + thrd->req[active].desc = NULL; + + thrd->req_running = -1; + + /* Get going again ASAP */ + pl330_start_thread(thrd); + + /* For now, just make a list of callbacks to be done */ + list_add_tail(&descdone->rqd, &pl330->req_done); + } + } + + /* Now that we are in no hurry, do the callbacks */ + while (!list_empty(&pl330->req_done)) { + descdone = list_first_entry(&pl330->req_done, + struct dma_pl330_desc, rqd); + list_del(&descdone->rqd); + spin_unlock_irqrestore(&pl330->lock, flags); + dma_pl330_rqcb(descdone, PL330_ERR_NONE); + spin_lock_irqsave(&pl330->lock, flags); + } + +updt_exit: + spin_unlock_irqrestore(&pl330->lock, flags); + + if (pl330->dmac_tbd.reset_dmac + || pl330->dmac_tbd.reset_mngr + || pl330->dmac_tbd.reset_chan) { + ret = 1; + tasklet_schedule(&pl330->tasks); + } + + return ret; +} + +/* Reserve an event */ +static inline int _alloc_event(struct pl330_thread *thrd) +{ + struct pl330_dmac *pl330 = thrd->dmac; + int ev; + + for (ev = 0; ev < pl330->pcfg.num_events; ev++) + if (pl330->events[ev] == -1) { + pl330->events[ev] = thrd->id; + return ev; + } + + return -1; +} + +static bool _chan_ns(const struct pl330_dmac *pl330, int i) +{ + return pl330->pcfg.irq_ns & (1 << i); +} + +/* Upon success, returns IdentityToken for the + * allocated channel, NULL otherwise. + */ +static struct pl330_thread *pl330_request_channel(struct pl330_dmac *pl330) +{ + struct pl330_thread *thrd = NULL; + int chans, i; + + if (pl330->state == DYING) + return NULL; + + chans = pl330->pcfg.num_chan; + + for (i = 0; i < chans; i++) { + thrd = &pl330->channels[i]; + if ((thrd->free) && (!_manager_ns(thrd) || + _chan_ns(pl330, i))) { + thrd->ev = _alloc_event(thrd); + if (thrd->ev >= 0) { + thrd->free = false; + thrd->lstenq = 1; + thrd->req[0].desc = NULL; + thrd->req[1].desc = NULL; + thrd->req_running = -1; + break; + } + } + thrd = NULL; + } + + return thrd; +} + +/* Release an event */ +static inline void _free_event(struct pl330_thread *thrd, int ev) +{ + struct pl330_dmac *pl330 = thrd->dmac; + + /* If the event is valid and was held by the thread */ + if (ev >= 0 && ev < pl330->pcfg.num_events + && pl330->events[ev] == thrd->id) + pl330->events[ev] = -1; +} + +static void pl330_release_channel(struct pl330_thread *thrd) +{ + if (!thrd || thrd->free) + return; + + _stop(thrd); + + dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, PL330_ERR_ABORT); + dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, PL330_ERR_ABORT); + + _free_event(thrd, thrd->ev); + thrd->free = true; +} + +/* Initialize the structure for PL330 configuration, that can be used + * by the client driver the make best use of the DMAC + */ +static void read_dmac_config(struct pl330_dmac *pl330) +{ + void __iomem *regs = pl330->base; + u32 val; + + val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT; + val &= CRD_DATA_WIDTH_MASK; + pl330->pcfg.data_bus_width = 8 * (1 << val); + + val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT; + val &= CRD_DATA_BUFF_MASK; + pl330->pcfg.data_buf_dep = val + 1; + + val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT; + val &= CR0_NUM_CHANS_MASK; + val += 1; + pl330->pcfg.num_chan = val; + + val = readl(regs + CR0); + if (val & CR0_PERIPH_REQ_SET) { + val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK; + val += 1; + pl330->pcfg.num_peri = val; + pl330->pcfg.peri_ns = readl(regs + CR4); + } else { + pl330->pcfg.num_peri = 0; + } + + val = readl(regs + CR0); + if (val & CR0_BOOT_MAN_NS) + pl330->pcfg.mode |= DMAC_MODE_NS; + else + pl330->pcfg.mode &= ~DMAC_MODE_NS; + + val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT; + val &= CR0_NUM_EVENTS_MASK; + val += 1; + pl330->pcfg.num_events = val; + + pl330->pcfg.irq_ns = readl(regs + CR3); +} + +static inline void _reset_thread(struct pl330_thread *thrd) +{ + struct pl330_dmac *pl330 = thrd->dmac; + + thrd->req[0].mc_cpu = pl330->mcode_cpu + + (thrd->id * pl330->mcbufsz); + thrd->req[0].mc_bus = pl330->mcode_bus + + (thrd->id * pl330->mcbufsz); + thrd->req[0].desc = NULL; + + thrd->req[1].mc_cpu = thrd->req[0].mc_cpu + + pl330->mcbufsz / 2; + thrd->req[1].mc_bus = thrd->req[0].mc_bus + + pl330->mcbufsz / 2; + thrd->req[1].desc = NULL; + + thrd->req_running = -1; +} + +static int dmac_alloc_threads(struct pl330_dmac *pl330) +{ + int chans = pl330->pcfg.num_chan; + struct pl330_thread *thrd; + int i; + + /* Allocate 1 Manager and 'chans' Channel threads */ + pl330->channels = kcalloc(1 + chans, sizeof(*thrd), + GFP_KERNEL); + if (!pl330->channels) + return -ENOMEM; + + /* Init Channel threads */ + for (i = 0; i < chans; i++) { + thrd = &pl330->channels[i]; + thrd->id = i; + thrd->dmac = pl330; + _reset_thread(thrd); + thrd->free = true; + } + + /* MANAGER is indexed at the end */ + thrd = &pl330->channels[chans]; + thrd->id = chans; + thrd->dmac = pl330; + thrd->free = false; + pl330->manager = thrd; + + return 0; +} + +static int dmac_alloc_resources(struct pl330_dmac *pl330) +{ + int chans = pl330->pcfg.num_chan; + int ret; + + /* + * Alloc MicroCode buffer for 'chans' Channel threads. + * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN) + */ + pl330->mcode_cpu = dma_alloc_attrs(pl330->ddma.dev, + chans * pl330->mcbufsz, + &pl330->mcode_bus, GFP_KERNEL, + DMA_ATTR_PRIVILEGED); + if (!pl330->mcode_cpu) { + dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n", + __func__, __LINE__); + return -ENOMEM; + } + + ret = dmac_alloc_threads(pl330); + if (ret) { + dev_err(pl330->ddma.dev, "%s:%d Can't to create channels for DMAC!\n", + __func__, __LINE__); + dma_free_attrs(pl330->ddma.dev, + chans * pl330->mcbufsz, + pl330->mcode_cpu, pl330->mcode_bus, + DMA_ATTR_PRIVILEGED); + return ret; + } + + return 0; +} + +static int pl330_add(struct pl330_dmac *pl330) +{ + int i, ret; + + /* Check if we can handle this DMAC */ + if ((pl330->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) { + dev_err(pl330->ddma.dev, "PERIPH_ID 0x%x !\n", + pl330->pcfg.periph_id); + return -EINVAL; + } + + /* Read the configuration of the DMAC */ + read_dmac_config(pl330); + + if (pl330->pcfg.num_events == 0) { + dev_err(pl330->ddma.dev, "%s:%d Can't work without events!\n", + __func__, __LINE__); + return -EINVAL; + } + + spin_lock_init(&pl330->lock); + + INIT_LIST_HEAD(&pl330->req_done); + + /* Use default MC buffer size if not provided */ + if (!pl330->mcbufsz) + pl330->mcbufsz = MCODE_BUFF_PER_REQ * 2; + + /* Mark all events as free */ + for (i = 0; i < pl330->pcfg.num_events; i++) + pl330->events[i] = -1; + + /* Allocate resources needed by the DMAC */ + ret = dmac_alloc_resources(pl330); + if (ret) { + dev_err(pl330->ddma.dev, "Unable to create channels for DMAC\n"); + return ret; + } + + tasklet_setup(&pl330->tasks, pl330_dotask); + + pl330->state = INIT; + + return 0; +} + +static int dmac_free_threads(struct pl330_dmac *pl330) +{ + struct pl330_thread *thrd; + int i; + + /* Release Channel threads */ + for (i = 0; i < pl330->pcfg.num_chan; i++) { + thrd = &pl330->channels[i]; + pl330_release_channel(thrd); + } + + /* Free memory */ + kfree(pl330->channels); + + return 0; +} + +static void pl330_del(struct pl330_dmac *pl330) +{ + pl330->state = UNINIT; + + tasklet_kill(&pl330->tasks); + + /* Free DMAC resources */ + dmac_free_threads(pl330); + + dma_free_attrs(pl330->ddma.dev, + pl330->pcfg.num_chan * pl330->mcbufsz, pl330->mcode_cpu, + pl330->mcode_bus, DMA_ATTR_PRIVILEGED); +} + +/* forward declaration */ +static struct amba_driver pl330_driver; + +static inline struct dma_pl330_chan * +to_pchan(struct dma_chan *ch) +{ + if (!ch) + return NULL; + + return container_of(ch, struct dma_pl330_chan, chan); +} + +static inline struct dma_pl330_desc * +to_desc(struct dma_async_tx_descriptor *tx) +{ + return container_of(tx, struct dma_pl330_desc, txd); +} + +static inline void fill_queue(struct dma_pl330_chan *pch) +{ + struct dma_pl330_desc *desc; + int ret; + + list_for_each_entry(desc, &pch->work_list, node) { + + /* If already submitted */ + if (desc->status == BUSY || desc->status == PAUSED) + continue; + + ret = pl330_submit_req(pch->thread, desc); + if (!ret) { + desc->status = BUSY; + } else if (ret == -EAGAIN) { + /* QFull or DMAC Dying */ + break; + } else { + /* Unacceptable request */ + desc->status = DONE; + dev_err(pch->dmac->ddma.dev, "%s:%d Bad Desc(%d)\n", + __func__, __LINE__, desc->txd.cookie); + tasklet_schedule(&pch->task); + } + } +} + +static void pl330_tasklet(struct tasklet_struct *t) +{ + struct dma_pl330_chan *pch = from_tasklet(pch, t, task); + struct dma_pl330_desc *desc, *_dt; + unsigned long flags; + bool power_down = false; + + spin_lock_irqsave(&pch->lock, flags); + + /* Pick up ripe tomatoes */ + list_for_each_entry_safe(desc, _dt, &pch->work_list, node) + if (desc->status == DONE) { + if (!pch->cyclic) + dma_cookie_complete(&desc->txd); + list_move_tail(&desc->node, &pch->completed_list); + } + + /* Try to submit a req imm. next to the last completed cookie */ + fill_queue(pch); + + if (list_empty(&pch->work_list)) { + spin_lock(&pch->thread->dmac->lock); + _stop(pch->thread); + spin_unlock(&pch->thread->dmac->lock); + power_down = true; + pch->active = false; + } else { + /* Make sure the PL330 Channel thread is active */ + spin_lock(&pch->thread->dmac->lock); + pl330_start_thread(pch->thread); + spin_unlock(&pch->thread->dmac->lock); + } + + while (!list_empty(&pch->completed_list)) { + struct dmaengine_desc_callback cb; + + desc = list_first_entry(&pch->completed_list, + struct dma_pl330_desc, node); + + dmaengine_desc_get_callback(&desc->txd, &cb); + + if (pch->cyclic) { + desc->status = PREP; + list_move_tail(&desc->node, &pch->work_list); + if (power_down) { + pch->active = true; + spin_lock(&pch->thread->dmac->lock); + pl330_start_thread(pch->thread); + spin_unlock(&pch->thread->dmac->lock); + power_down = false; + } + } else { + desc->status = FREE; + list_move_tail(&desc->node, &pch->dmac->desc_pool); + } + + dma_descriptor_unmap(&desc->txd); + + if (dmaengine_desc_callback_valid(&cb)) { + spin_unlock_irqrestore(&pch->lock, flags); + dmaengine_desc_callback_invoke(&cb, NULL); + spin_lock_irqsave(&pch->lock, flags); + } + } + spin_unlock_irqrestore(&pch->lock, flags); + + /* If work list empty, power down */ + if (power_down) { + pm_runtime_mark_last_busy(pch->dmac->ddma.dev); + pm_runtime_put_autosuspend(pch->dmac->ddma.dev); + } +} + +static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec, + struct of_dma *ofdma) +{ + int count = dma_spec->args_count; + struct pl330_dmac *pl330 = ofdma->of_dma_data; + unsigned int chan_id; + + if (!pl330) + return NULL; + + if (count != 1) + return NULL; + + chan_id = dma_spec->args[0]; + if (chan_id >= pl330->num_peripherals) + return NULL; + + return dma_get_slave_channel(&pl330->peripherals[chan_id].chan); +} + +static int pl330_alloc_chan_resources(struct dma_chan *chan) +{ + struct dma_pl330_chan *pch = to_pchan(chan); + struct pl330_dmac *pl330 = pch->dmac; + unsigned long flags; + + spin_lock_irqsave(&pl330->lock, flags); + + dma_cookie_init(chan); + pch->cyclic = false; + + pch->thread = pl330_request_channel(pl330); + if (!pch->thread) { + spin_unlock_irqrestore(&pl330->lock, flags); + return -ENOMEM; + } + + tasklet_setup(&pch->task, pl330_tasklet); + + spin_unlock_irqrestore(&pl330->lock, flags); + + return 1; +} + +/* + * We need the data direction between the DMAC (the dma-mapping "device") and + * the FIFO (the dmaengine "dev"), from the FIFO's point of view. Confusing! + */ +static enum dma_data_direction +pl330_dma_slave_map_dir(enum dma_transfer_direction dir) +{ + switch (dir) { + case DMA_MEM_TO_DEV: + return DMA_FROM_DEVICE; + case DMA_DEV_TO_MEM: + return DMA_TO_DEVICE; + case DMA_DEV_TO_DEV: + return DMA_BIDIRECTIONAL; + default: + return DMA_NONE; + } +} + +static void pl330_unprep_slave_fifo(struct dma_pl330_chan *pch) +{ + if (pch->dir != DMA_NONE) + dma_unmap_resource(pch->chan.device->dev, pch->fifo_dma, + 1 << pch->burst_sz, pch->dir, 0); + pch->dir = DMA_NONE; +} + + +static bool pl330_prep_slave_fifo(struct dma_pl330_chan *pch, + enum dma_transfer_direction dir) +{ + struct device *dev = pch->chan.device->dev; + enum dma_data_direction dma_dir = pl330_dma_slave_map_dir(dir); + + /* Already mapped for this config? */ + if (pch->dir == dma_dir) + return true; + + pl330_unprep_slave_fifo(pch); + pch->fifo_dma = dma_map_resource(dev, pch->fifo_addr, + 1 << pch->burst_sz, dma_dir, 0); + if (dma_mapping_error(dev, pch->fifo_dma)) + return false; + + pch->dir = dma_dir; + return true; +} + +static int fixup_burst_len(int max_burst_len, int quirks) +{ + if (max_burst_len > PL330_MAX_BURST) + return PL330_MAX_BURST; + else if (max_burst_len < 1) + return 1; + else + return max_burst_len; +} + +static int pl330_config_write(struct dma_chan *chan, + struct dma_slave_config *slave_config, + enum dma_transfer_direction direction) +{ + struct dma_pl330_chan *pch = to_pchan(chan); + + pl330_unprep_slave_fifo(pch); + if (direction == DMA_MEM_TO_DEV) { + if (slave_config->dst_addr) + pch->fifo_addr = slave_config->dst_addr; + if (slave_config->dst_addr_width) + pch->burst_sz = __ffs(slave_config->dst_addr_width); + pch->burst_len = fixup_burst_len(slave_config->dst_maxburst, + pch->dmac->quirks); + } else if (direction == DMA_DEV_TO_MEM) { + if (slave_config->src_addr) + pch->fifo_addr = slave_config->src_addr; + if (slave_config->src_addr_width) + pch->burst_sz = __ffs(slave_config->src_addr_width); + pch->burst_len = fixup_burst_len(slave_config->src_maxburst, + pch->dmac->quirks); + } + + return 0; +} + +static int pl330_config(struct dma_chan *chan, + struct dma_slave_config *slave_config) +{ + struct dma_pl330_chan *pch = to_pchan(chan); + + memcpy(&pch->slave_config, slave_config, sizeof(*slave_config)); + + return 0; +} + +static int pl330_terminate_all(struct dma_chan *chan) +{ + struct dma_pl330_chan *pch = to_pchan(chan); + struct dma_pl330_desc *desc; + unsigned long flags; + struct pl330_dmac *pl330 = pch->dmac; + bool power_down = false; + + pm_runtime_get_sync(pl330->ddma.dev); + spin_lock_irqsave(&pch->lock, flags); + + spin_lock(&pl330->lock); + _stop(pch->thread); + pch->thread->req[0].desc = NULL; + pch->thread->req[1].desc = NULL; + pch->thread->req_running = -1; + spin_unlock(&pl330->lock); + + power_down = pch->active; + pch->active = false; + + /* Mark all desc done */ + list_for_each_entry(desc, &pch->submitted_list, node) { + desc->status = FREE; + dma_cookie_complete(&desc->txd); + } + + list_for_each_entry(desc, &pch->work_list , node) { + desc->status = FREE; + dma_cookie_complete(&desc->txd); + } + + list_splice_tail_init(&pch->submitted_list, &pl330->desc_pool); + list_splice_tail_init(&pch->work_list, &pl330->desc_pool); + list_splice_tail_init(&pch->completed_list, &pl330->desc_pool); + spin_unlock_irqrestore(&pch->lock, flags); + pm_runtime_mark_last_busy(pl330->ddma.dev); + if (power_down) + pm_runtime_put_autosuspend(pl330->ddma.dev); + pm_runtime_put_autosuspend(pl330->ddma.dev); + + return 0; +} + +/* + * We don't support DMA_RESUME command because of hardware + * limitations, so after pausing the channel we cannot restore + * it to active state. We have to terminate channel and setup + * DMA transfer again. This pause feature was implemented to + * allow safely read residue before channel termination. + */ +static int pl330_pause(struct dma_chan *chan) +{ + struct dma_pl330_chan *pch = to_pchan(chan); + struct pl330_dmac *pl330 = pch->dmac; + struct dma_pl330_desc *desc; + unsigned long flags; + + pm_runtime_get_sync(pl330->ddma.dev); + spin_lock_irqsave(&pch->lock, flags); + + spin_lock(&pl330->lock); + _stop(pch->thread); + spin_unlock(&pl330->lock); + + list_for_each_entry(desc, &pch->work_list, node) { + if (desc->status == BUSY) + desc->status = PAUSED; + } + spin_unlock_irqrestore(&pch->lock, flags); + pm_runtime_mark_last_busy(pl330->ddma.dev); + pm_runtime_put_autosuspend(pl330->ddma.dev); + + return 0; +} + +static void pl330_free_chan_resources(struct dma_chan *chan) +{ + struct dma_pl330_chan *pch = to_pchan(chan); + struct pl330_dmac *pl330 = pch->dmac; + unsigned long flags; + + tasklet_kill(&pch->task); + + pm_runtime_get_sync(pch->dmac->ddma.dev); + spin_lock_irqsave(&pl330->lock, flags); + + pl330_release_channel(pch->thread); + pch->thread = NULL; + + if (pch->cyclic) + list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool); + + spin_unlock_irqrestore(&pl330->lock, flags); + pm_runtime_mark_last_busy(pch->dmac->ddma.dev); + pm_runtime_put_autosuspend(pch->dmac->ddma.dev); + pl330_unprep_slave_fifo(pch); +} + +static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch, + struct dma_pl330_desc *desc) +{ + struct pl330_thread *thrd = pch->thread; + struct pl330_dmac *pl330 = pch->dmac; + void __iomem *regs = thrd->dmac->base; + u32 val, addr; + + pm_runtime_get_sync(pl330->ddma.dev); + val = addr = 0; + if (desc->rqcfg.src_inc) { + val = readl(regs + SA(thrd->id)); + addr = desc->px.src_addr; + } else { + val = readl(regs + DA(thrd->id)); + addr = desc->px.dst_addr; + } + pm_runtime_mark_last_busy(pch->dmac->ddma.dev); + pm_runtime_put_autosuspend(pl330->ddma.dev); + + /* If DMAMOV hasn't finished yet, SAR/DAR can be zero */ + if (!val) + return 0; + + return val - addr; +} + +static enum dma_status +pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie, + struct dma_tx_state *txstate) +{ + enum dma_status ret; + unsigned long flags; + struct dma_pl330_desc *desc, *running = NULL, *last_enq = NULL; + struct dma_pl330_chan *pch = to_pchan(chan); + unsigned int transferred, residual = 0; + + ret = dma_cookie_status(chan, cookie, txstate); + + if (!txstate) + return ret; + + if (ret == DMA_COMPLETE) + goto out; + + spin_lock_irqsave(&pch->lock, flags); + spin_lock(&pch->thread->dmac->lock); + + if (pch->thread->req_running != -1) + running = pch->thread->req[pch->thread->req_running].desc; + + last_enq = pch->thread->req[pch->thread->lstenq].desc; + + /* Check in pending list */ + list_for_each_entry(desc, &pch->work_list, node) { + if (desc->status == DONE) + transferred = desc->bytes_requested; + else if (running && desc == running) + transferred = + pl330_get_current_xferred_count(pch, desc); + else if (desc->status == BUSY || desc->status == PAUSED) + /* + * Busy but not running means either just enqueued, + * or finished and not yet marked done + */ + if (desc == last_enq) + transferred = 0; + else + transferred = desc->bytes_requested; + else + transferred = 0; + residual += desc->bytes_requested - transferred; + if (desc->txd.cookie == cookie) { + switch (desc->status) { + case DONE: + ret = DMA_COMPLETE; + break; + case PAUSED: + ret = DMA_PAUSED; + break; + case PREP: + case BUSY: + ret = DMA_IN_PROGRESS; + break; + default: + WARN_ON(1); + } + break; + } + if (desc->last) + residual = 0; + } + spin_unlock(&pch->thread->dmac->lock); + spin_unlock_irqrestore(&pch->lock, flags); + +out: + dma_set_residue(txstate, residual); + + return ret; +} + +static void pl330_issue_pending(struct dma_chan *chan) +{ + struct dma_pl330_chan *pch = to_pchan(chan); + unsigned long flags; + + spin_lock_irqsave(&pch->lock, flags); + if (list_empty(&pch->work_list)) { + /* + * Warn on nothing pending. Empty submitted_list may + * break our pm_runtime usage counter as it is + * updated on work_list emptiness status. + */ + WARN_ON(list_empty(&pch->submitted_list)); + pch->active = true; + pm_runtime_get_sync(pch->dmac->ddma.dev); + } + list_splice_tail_init(&pch->submitted_list, &pch->work_list); + spin_unlock_irqrestore(&pch->lock, flags); + + pl330_tasklet(&pch->task); +} + +/* + * We returned the last one of the circular list of descriptor(s) + * from prep_xxx, so the argument to submit corresponds to the last + * descriptor of the list. + */ +static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx) +{ + struct dma_pl330_desc *desc, *last = to_desc(tx); + struct dma_pl330_chan *pch = to_pchan(tx->chan); + dma_cookie_t cookie; + unsigned long flags; + + spin_lock_irqsave(&pch->lock, flags); + + /* Assign cookies to all nodes */ + while (!list_empty(&last->node)) { + desc = list_entry(last->node.next, struct dma_pl330_desc, node); + if (pch->cyclic) { + desc->txd.callback = last->txd.callback; + desc->txd.callback_param = last->txd.callback_param; + } + desc->last = false; + + dma_cookie_assign(&desc->txd); + + list_move_tail(&desc->node, &pch->submitted_list); + } + + last->last = true; + cookie = dma_cookie_assign(&last->txd); + list_add_tail(&last->node, &pch->submitted_list); + spin_unlock_irqrestore(&pch->lock, flags); + + return cookie; +} + +static inline void _init_desc(struct dma_pl330_desc *desc) +{ + desc->rqcfg.swap = SWAP_NO; + desc->rqcfg.scctl = CCTRL0; + desc->rqcfg.dcctl = CCTRL0; + desc->txd.tx_submit = pl330_tx_submit; + + INIT_LIST_HEAD(&desc->node); +} + +/* Returns the number of descriptors added to the DMAC pool */ +static int add_desc(struct list_head *pool, spinlock_t *lock, + gfp_t flg, int count) +{ + struct dma_pl330_desc *desc; + unsigned long flags; + int i; + + desc = kcalloc(count, sizeof(*desc), flg); + if (!desc) + return 0; + + spin_lock_irqsave(lock, flags); + + for (i = 0; i < count; i++) { + _init_desc(&desc[i]); + list_add_tail(&desc[i].node, pool); + } + + spin_unlock_irqrestore(lock, flags); + + return count; +} + +static struct dma_pl330_desc *pluck_desc(struct list_head *pool, + spinlock_t *lock) +{ + struct dma_pl330_desc *desc = NULL; + unsigned long flags; + + spin_lock_irqsave(lock, flags); + + if (!list_empty(pool)) { + desc = list_entry(pool->next, + struct dma_pl330_desc, node); + + list_del_init(&desc->node); + + desc->status = PREP; + desc->txd.callback = NULL; + } + + spin_unlock_irqrestore(lock, flags); + + return desc; +} + +static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch) +{ + struct pl330_dmac *pl330 = pch->dmac; + u8 *peri_id = pch->chan.private; + struct dma_pl330_desc *desc; + + /* Pluck one desc from the pool of DMAC */ + desc = pluck_desc(&pl330->desc_pool, &pl330->pool_lock); + + /* If the DMAC pool is empty, alloc new */ + if (!desc) { + static DEFINE_SPINLOCK(lock); + LIST_HEAD(pool); + + if (!add_desc(&pool, &lock, GFP_ATOMIC, 1)) + return NULL; + + desc = pluck_desc(&pool, &lock); + WARN_ON(!desc || !list_empty(&pool)); + } + + /* Initialize the descriptor */ + desc->pchan = pch; + desc->txd.cookie = 0; + async_tx_ack(&desc->txd); + + desc->peri = peri_id ? pch->chan.chan_id : 0; + desc->rqcfg.pcfg = &pch->dmac->pcfg; + + dma_async_tx_descriptor_init(&desc->txd, &pch->chan); + + return desc; +} + +static inline void fill_px(struct pl330_xfer *px, + dma_addr_t dst, dma_addr_t src, size_t len) +{ + px->bytes = len; + px->dst_addr = dst; + px->src_addr = src; +} + +static struct dma_pl330_desc * +__pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst, + dma_addr_t src, size_t len) +{ + struct dma_pl330_desc *desc = pl330_get_desc(pch); + + if (!desc) { + dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n", + __func__, __LINE__); + return NULL; + } + + /* + * Ideally we should lookout for reqs bigger than + * those that can be programmed with 256 bytes of + * MC buffer, but considering a req size is seldom + * going to be word-unaligned and more than 200MB, + * we take it easy. + * Also, should the limit is reached we'd rather + * have the platform increase MC buffer size than + * complicating this API driver. + */ + fill_px(&desc->px, dst, src, len); + + return desc; +} + +/* Call after fixing burst size */ +static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len) +{ + struct dma_pl330_chan *pch = desc->pchan; + struct pl330_dmac *pl330 = pch->dmac; + int burst_len; + + burst_len = pl330->pcfg.data_bus_width / 8; + burst_len *= pl330->pcfg.data_buf_dep / pl330->pcfg.num_chan; + burst_len >>= desc->rqcfg.brst_size; + + /* src/dst_burst_len can't be more than 16 */ + if (burst_len > PL330_MAX_BURST) + burst_len = PL330_MAX_BURST; + + return burst_len; +} + +static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic( + struct dma_chan *chan, dma_addr_t dma_addr, size_t len, + size_t period_len, enum dma_transfer_direction direction, + unsigned long flags) +{ + struct dma_pl330_desc *desc = NULL, *first = NULL; + struct dma_pl330_chan *pch = to_pchan(chan); + struct pl330_dmac *pl330 = pch->dmac; + unsigned int i; + dma_addr_t dst; + dma_addr_t src; + + if (len % period_len != 0) + return NULL; + + if (!is_slave_direction(direction)) { + dev_err(pch->dmac->ddma.dev, "%s:%d Invalid dma direction\n", + __func__, __LINE__); + return NULL; + } + + pl330_config_write(chan, &pch->slave_config, direction); + + if (!pl330_prep_slave_fifo(pch, direction)) + return NULL; + + for (i = 0; i < len / period_len; i++) { + desc = pl330_get_desc(pch); + if (!desc) { + unsigned long iflags; + + dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n", + __func__, __LINE__); + + if (!first) + return NULL; + + spin_lock_irqsave(&pl330->pool_lock, iflags); + + while (!list_empty(&first->node)) { + desc = list_entry(first->node.next, + struct dma_pl330_desc, node); + list_move_tail(&desc->node, &pl330->desc_pool); + } + + list_move_tail(&first->node, &pl330->desc_pool); + + spin_unlock_irqrestore(&pl330->pool_lock, iflags); + + return NULL; + } + + switch (direction) { + case DMA_MEM_TO_DEV: + desc->rqcfg.src_inc = 1; + desc->rqcfg.dst_inc = 0; + src = dma_addr; + dst = pch->fifo_dma; + break; + case DMA_DEV_TO_MEM: + desc->rqcfg.src_inc = 0; + desc->rqcfg.dst_inc = 1; + src = pch->fifo_dma; + dst = dma_addr; + break; + default: + break; + } + + desc->rqtype = direction; + desc->rqcfg.brst_size = pch->burst_sz; + desc->rqcfg.brst_len = pch->burst_len; + desc->bytes_requested = period_len; + fill_px(&desc->px, dst, src, period_len); + + if (!first) + first = desc; + else + list_add_tail(&desc->node, &first->node); + + dma_addr += period_len; + } + + if (!desc) + return NULL; + + pch->cyclic = true; + + return &desc->txd; +} + +static struct dma_async_tx_descriptor * +pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, + dma_addr_t src, size_t len, unsigned long flags) +{ + struct dma_pl330_desc *desc; + struct dma_pl330_chan *pch = to_pchan(chan); + struct pl330_dmac *pl330; + int burst; + + if (unlikely(!pch || !len)) + return NULL; + + pl330 = pch->dmac; + + desc = __pl330_prep_dma_memcpy(pch, dst, src, len); + if (!desc) + return NULL; + + desc->rqcfg.src_inc = 1; + desc->rqcfg.dst_inc = 1; + desc->rqtype = DMA_MEM_TO_MEM; + + /* Select max possible burst size */ + burst = pl330->pcfg.data_bus_width / 8; + + /* + * Make sure we use a burst size that aligns with all the memcpy + * parameters because our DMA programming algorithm doesn't cope with + * transfers which straddle an entry in the DMA device's MFIFO. + */ + while ((src | dst | len) & (burst - 1)) + burst /= 2; + + desc->rqcfg.brst_size = 0; + while (burst != (1 << desc->rqcfg.brst_size)) + desc->rqcfg.brst_size++; + + desc->rqcfg.brst_len = get_burst_len(desc, len); + /* + * If burst size is smaller than bus width then make sure we only + * transfer one at a time to avoid a burst stradling an MFIFO entry. + */ + if (burst * 8 < pl330->pcfg.data_bus_width) + desc->rqcfg.brst_len = 1; + + desc->bytes_requested = len; + + return &desc->txd; +} + +static void __pl330_giveback_desc(struct pl330_dmac *pl330, + struct dma_pl330_desc *first) +{ + unsigned long flags; + struct dma_pl330_desc *desc; + + if (!first) + return; + + spin_lock_irqsave(&pl330->pool_lock, flags); + + while (!list_empty(&first->node)) { + desc = list_entry(first->node.next, + struct dma_pl330_desc, node); + list_move_tail(&desc->node, &pl330->desc_pool); + } + + list_move_tail(&first->node, &pl330->desc_pool); + + spin_unlock_irqrestore(&pl330->pool_lock, flags); +} + +static struct dma_async_tx_descriptor * +pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, + unsigned int sg_len, enum dma_transfer_direction direction, + unsigned long flg, void *context) +{ + struct dma_pl330_desc *first, *desc = NULL; + struct dma_pl330_chan *pch = to_pchan(chan); + struct scatterlist *sg; + int i; + + if (unlikely(!pch || !sgl || !sg_len)) + return NULL; + + pl330_config_write(chan, &pch->slave_config, direction); + + if (!pl330_prep_slave_fifo(pch, direction)) + return NULL; + + first = NULL; + + for_each_sg(sgl, sg, sg_len, i) { + + desc = pl330_get_desc(pch); + if (!desc) { + struct pl330_dmac *pl330 = pch->dmac; + + dev_err(pch->dmac->ddma.dev, + "%s:%d Unable to fetch desc\n", + __func__, __LINE__); + __pl330_giveback_desc(pl330, first); + + return NULL; + } + + if (!first) + first = desc; + else + list_add_tail(&desc->node, &first->node); + + if (direction == DMA_MEM_TO_DEV) { + desc->rqcfg.src_inc = 1; + desc->rqcfg.dst_inc = 0; + fill_px(&desc->px, pch->fifo_dma, sg_dma_address(sg), + sg_dma_len(sg)); + } else { + desc->rqcfg.src_inc = 0; + desc->rqcfg.dst_inc = 1; + fill_px(&desc->px, sg_dma_address(sg), pch->fifo_dma, + sg_dma_len(sg)); + } + + desc->rqcfg.brst_size = pch->burst_sz; + desc->rqcfg.brst_len = pch->burst_len; + desc->rqtype = direction; + desc->bytes_requested = sg_dma_len(sg); + } + + /* Return the last desc in the chain */ + return &desc->txd; +} + +static irqreturn_t pl330_irq_handler(int irq, void *data) +{ + if (pl330_update(data)) + return IRQ_HANDLED; + else + return IRQ_NONE; +} + +#define PL330_DMA_BUSWIDTHS \ + BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \ + BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \ + BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \ + BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \ + BIT(DMA_SLAVE_BUSWIDTH_8_BYTES) + +#ifdef CONFIG_DEBUG_FS +static int pl330_debugfs_show(struct seq_file *s, void *data) +{ + struct pl330_dmac *pl330 = s->private; + int chans, pchs, ch, pr; + + chans = pl330->pcfg.num_chan; + pchs = pl330->num_peripherals; + + seq_puts(s, "PL330 physical channels:\n"); + seq_puts(s, "THREAD:\t\tCHANNEL:\n"); + seq_puts(s, "--------\t-----\n"); + for (ch = 0; ch < chans; ch++) { + struct pl330_thread *thrd = &pl330->channels[ch]; + int found = -1; + + for (pr = 0; pr < pchs; pr++) { + struct dma_pl330_chan *pch = &pl330->peripherals[pr]; + + if (!pch->thread || thrd->id != pch->thread->id) + continue; + + found = pr; + } + + seq_printf(s, "%d\t\t", thrd->id); + if (found == -1) + seq_puts(s, "--\n"); + else + seq_printf(s, "%d\n", found); + } + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(pl330_debugfs); + +static inline void init_pl330_debugfs(struct pl330_dmac *pl330) +{ + debugfs_create_file(dev_name(pl330->ddma.dev), + S_IFREG | 0444, NULL, pl330, + &pl330_debugfs_fops); +} +#else +static inline void init_pl330_debugfs(struct pl330_dmac *pl330) +{ +} +#endif + +/* + * Runtime PM callbacks are provided by amba/bus.c driver. + * + * It is assumed here that IRQ safe runtime PM is chosen in probe and amba + * bus driver will only disable/enable the clock in runtime PM callbacks. + */ +static int __maybe_unused pl330_suspend(struct device *dev) +{ + struct amba_device *pcdev = to_amba_device(dev); + + pm_runtime_force_suspend(dev); + clk_unprepare(pcdev->pclk); + + return 0; +} + +static int __maybe_unused pl330_resume(struct device *dev) +{ + struct amba_device *pcdev = to_amba_device(dev); + int ret; + + ret = clk_prepare(pcdev->pclk); + if (ret) + return ret; + + pm_runtime_force_resume(dev); + + return ret; +} + +static const struct dev_pm_ops pl330_pm = { + SET_LATE_SYSTEM_SLEEP_PM_OPS(pl330_suspend, pl330_resume) +}; + +static int +pl330_probe(struct amba_device *adev, const struct amba_id *id) +{ + struct pl330_config *pcfg; + struct pl330_dmac *pl330; + struct dma_pl330_chan *pch, *_p; + struct dma_device *pd; + struct resource *res; + int i, ret, irq; + int num_chan; + struct device_node *np = adev->dev.of_node; + + ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret; + + /* Allocate a new DMAC and its Channels */ + pl330 = devm_kzalloc(&adev->dev, sizeof(*pl330), GFP_KERNEL); + if (!pl330) + return -ENOMEM; + + pd = &pl330->ddma; + pd->dev = &adev->dev; + + pl330->mcbufsz = 0; + + /* get quirk */ + for (i = 0; i < ARRAY_SIZE(of_quirks); i++) + if (of_property_read_bool(np, of_quirks[i].quirk)) + pl330->quirks |= of_quirks[i].id; + + res = &adev->res; + pl330->base = devm_ioremap_resource(&adev->dev, res); + if (IS_ERR(pl330->base)) + return PTR_ERR(pl330->base); + + amba_set_drvdata(adev, pl330); + + pl330->rstc = devm_reset_control_get_optional(&adev->dev, "dma"); + if (IS_ERR(pl330->rstc)) { + return dev_err_probe(&adev->dev, PTR_ERR(pl330->rstc), "Failed to get reset!\n"); + } else { + ret = reset_control_deassert(pl330->rstc); + if (ret) { + dev_err(&adev->dev, "Couldn't deassert the device from reset!\n"); + return ret; + } + } + + pl330->rstc_ocp = devm_reset_control_get_optional(&adev->dev, "dma-ocp"); + if (IS_ERR(pl330->rstc_ocp)) { + return dev_err_probe(&adev->dev, PTR_ERR(pl330->rstc_ocp), + "Failed to get OCP reset!\n"); + } else { + ret = reset_control_deassert(pl330->rstc_ocp); + if (ret) { + dev_err(&adev->dev, "Couldn't deassert the device from OCP reset!\n"); + return ret; + } + } + + for (i = 0; i < AMBA_NR_IRQS; i++) { + irq = adev->irq[i]; + if (irq) { + ret = devm_request_irq(&adev->dev, irq, + pl330_irq_handler, 0, + dev_name(&adev->dev), pl330); + if (ret) + return ret; + } else { + break; + } + } + + pcfg = &pl330->pcfg; + + pcfg->periph_id = adev->periphid; + ret = pl330_add(pl330); + if (ret) + return ret; + + INIT_LIST_HEAD(&pl330->desc_pool); + spin_lock_init(&pl330->pool_lock); + + /* Create a descriptor pool of default size */ + if (!add_desc(&pl330->desc_pool, &pl330->pool_lock, + GFP_KERNEL, NR_DEFAULT_DESC)) + dev_warn(&adev->dev, "unable to allocate desc\n"); + + INIT_LIST_HEAD(&pd->channels); + + /* Initialize channel parameters */ + num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan); + + pl330->num_peripherals = num_chan; + + pl330->peripherals = kcalloc(num_chan, sizeof(*pch), GFP_KERNEL); + if (!pl330->peripherals) { + ret = -ENOMEM; + goto probe_err2; + } + + for (i = 0; i < num_chan; i++) { + pch = &pl330->peripherals[i]; + + pch->chan.private = adev->dev.of_node; + INIT_LIST_HEAD(&pch->submitted_list); + INIT_LIST_HEAD(&pch->work_list); + INIT_LIST_HEAD(&pch->completed_list); + spin_lock_init(&pch->lock); + pch->thread = NULL; + pch->chan.device = pd; + pch->dmac = pl330; + pch->dir = DMA_NONE; + + /* Add the channel to the DMAC list */ + list_add_tail(&pch->chan.device_node, &pd->channels); + } + + dma_cap_set(DMA_MEMCPY, pd->cap_mask); + if (pcfg->num_peri) { + dma_cap_set(DMA_SLAVE, pd->cap_mask); + dma_cap_set(DMA_CYCLIC, pd->cap_mask); + dma_cap_set(DMA_PRIVATE, pd->cap_mask); + } + + pd->device_alloc_chan_resources = pl330_alloc_chan_resources; + pd->device_free_chan_resources = pl330_free_chan_resources; + pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy; + pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic; + pd->device_tx_status = pl330_tx_status; + pd->device_prep_slave_sg = pl330_prep_slave_sg; + pd->device_config = pl330_config; + pd->device_pause = pl330_pause; + pd->device_terminate_all = pl330_terminate_all; + pd->device_issue_pending = pl330_issue_pending; + pd->src_addr_widths = PL330_DMA_BUSWIDTHS; + pd->dst_addr_widths = PL330_DMA_BUSWIDTHS; + pd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); + pd->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; + pd->max_burst = PL330_MAX_BURST; + + ret = dma_async_device_register(pd); + if (ret) { + dev_err(&adev->dev, "unable to register DMAC\n"); + goto probe_err3; + } + + if (adev->dev.of_node) { + ret = of_dma_controller_register(adev->dev.of_node, + of_dma_pl330_xlate, pl330); + if (ret) { + dev_err(&adev->dev, + "unable to register DMA to the generic DT DMA helpers\n"); + } + } + + /* + * This is the limit for transfers with a buswidth of 1, larger + * buswidths will have larger limits. + */ + ret = dma_set_max_seg_size(&adev->dev, 1900800); + if (ret) + dev_err(&adev->dev, "unable to set the seg size\n"); + + + init_pl330_debugfs(pl330); + dev_info(&adev->dev, + "Loaded driver for PL330 DMAC-%x\n", adev->periphid); + dev_info(&adev->dev, + "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n", + pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan, + pcfg->num_peri, pcfg->num_events); + + pm_runtime_irq_safe(&adev->dev); + pm_runtime_use_autosuspend(&adev->dev); + pm_runtime_set_autosuspend_delay(&adev->dev, PL330_AUTOSUSPEND_DELAY); + pm_runtime_mark_last_busy(&adev->dev); + pm_runtime_put_autosuspend(&adev->dev); + + return 0; +probe_err3: + /* Idle the DMAC */ + list_for_each_entry_safe(pch, _p, &pl330->ddma.channels, + chan.device_node) { + + /* Remove the channel */ + list_del(&pch->chan.device_node); + + /* Flush the channel */ + if (pch->thread) { + pl330_terminate_all(&pch->chan); + pl330_free_chan_resources(&pch->chan); + } + } +probe_err2: + pl330_del(pl330); + + if (pl330->rstc_ocp) + reset_control_assert(pl330->rstc_ocp); + + if (pl330->rstc) + reset_control_assert(pl330->rstc); + return ret; +} + +static void pl330_remove(struct amba_device *adev) +{ + struct pl330_dmac *pl330 = amba_get_drvdata(adev); + struct dma_pl330_chan *pch, *_p; + int i, irq; + + pm_runtime_get_noresume(pl330->ddma.dev); + + if (adev->dev.of_node) + of_dma_controller_free(adev->dev.of_node); + + for (i = 0; i < AMBA_NR_IRQS; i++) { + irq = adev->irq[i]; + if (irq) + devm_free_irq(&adev->dev, irq, pl330); + } + + dma_async_device_unregister(&pl330->ddma); + + /* Idle the DMAC */ + list_for_each_entry_safe(pch, _p, &pl330->ddma.channels, + chan.device_node) { + + /* Remove the channel */ + list_del(&pch->chan.device_node); + + /* Flush the channel */ + if (pch->thread) { + pl330_terminate_all(&pch->chan); + pl330_free_chan_resources(&pch->chan); + } + } + + pl330_del(pl330); + + if (pl330->rstc_ocp) + reset_control_assert(pl330->rstc_ocp); + + if (pl330->rstc) + reset_control_assert(pl330->rstc); +} + +static const struct amba_id pl330_ids[] = { + { + .id = 0x00041330, + .mask = 0x000fffff, + }, + { 0, 0 }, +}; + +MODULE_DEVICE_TABLE(amba, pl330_ids); + +static struct amba_driver pl330_driver = { + .drv = { + .owner = THIS_MODULE, + .name = "dma-pl330", + .pm = &pl330_pm, + }, + .id_table = pl330_ids, + .probe = pl330_probe, + .remove = pl330_remove, +}; + +module_amba_driver(pl330_driver); + +MODULE_AUTHOR("Jaswinder Singh <jassisinghbrar@gmail.com>"); +MODULE_DESCRIPTION("API Driver for PL330 DMAC"); +MODULE_LICENSE("GPL"); |