diff options
Diffstat (limited to 'drivers/firmware/ti_sci.h')
| -rw-r--r-- | drivers/firmware/ti_sci.h | 1397 |
1 files changed, 1397 insertions, 0 deletions
diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h new file mode 100644 index 0000000000..ef3a8214d0 --- /dev/null +++ b/drivers/firmware/ti_sci.h @@ -0,0 +1,1397 @@ +/* SPDX-License-Identifier: BSD-3-Clause */ +/* + * Texas Instruments System Control Interface (TISCI) Protocol + * + * Communication protocol with TI SCI hardware + * The system works in a message response protocol + * See: http://processors.wiki.ti.com/index.php/TISCI for details + * + * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#ifndef __TI_SCI_H +#define __TI_SCI_H + +/* Generic Messages */ +#define TI_SCI_MSG_ENABLE_WDT 0x0000 +#define TI_SCI_MSG_WAKE_RESET 0x0001 +#define TI_SCI_MSG_VERSION 0x0002 +#define TI_SCI_MSG_WAKE_REASON 0x0003 +#define TI_SCI_MSG_GOODBYE 0x0004 +#define TI_SCI_MSG_SYS_RESET 0x0005 + +/* Device requests */ +#define TI_SCI_MSG_SET_DEVICE_STATE 0x0200 +#define TI_SCI_MSG_GET_DEVICE_STATE 0x0201 +#define TI_SCI_MSG_SET_DEVICE_RESETS 0x0202 + +/* Clock requests */ +#define TI_SCI_MSG_SET_CLOCK_STATE 0x0100 +#define TI_SCI_MSG_GET_CLOCK_STATE 0x0101 +#define TI_SCI_MSG_SET_CLOCK_PARENT 0x0102 +#define TI_SCI_MSG_GET_CLOCK_PARENT 0x0103 +#define TI_SCI_MSG_GET_NUM_CLOCK_PARENTS 0x0104 +#define TI_SCI_MSG_SET_CLOCK_FREQ 0x010c +#define TI_SCI_MSG_QUERY_CLOCK_FREQ 0x010d +#define TI_SCI_MSG_GET_CLOCK_FREQ 0x010e + +/* Resource Management Requests */ +#define TI_SCI_MSG_GET_RESOURCE_RANGE 0x1500 + +/* IRQ requests */ +#define TI_SCI_MSG_SET_IRQ 0x1000 +#define TI_SCI_MSG_FREE_IRQ 0x1001 + +/* NAVSS resource management */ +/* Ringacc requests */ +#define TI_SCI_MSG_RM_RING_ALLOCATE 0x1100 +#define TI_SCI_MSG_RM_RING_FREE 0x1101 +#define TI_SCI_MSG_RM_RING_RECONFIG 0x1102 +#define TI_SCI_MSG_RM_RING_RESET 0x1103 +#define TI_SCI_MSG_RM_RING_CFG 0x1110 + +/* PSI-L requests */ +#define TI_SCI_MSG_RM_PSIL_PAIR 0x1280 +#define TI_SCI_MSG_RM_PSIL_UNPAIR 0x1281 + +#define TI_SCI_MSG_RM_UDMAP_TX_ALLOC 0x1200 +#define TI_SCI_MSG_RM_UDMAP_TX_FREE 0x1201 +#define TI_SCI_MSG_RM_UDMAP_RX_ALLOC 0x1210 +#define TI_SCI_MSG_RM_UDMAP_RX_FREE 0x1211 +#define TI_SCI_MSG_RM_UDMAP_FLOW_CFG 0x1220 +#define TI_SCI_MSG_RM_UDMAP_OPT_FLOW_CFG 0x1221 + +#define TISCI_MSG_RM_UDMAP_TX_CH_CFG 0x1205 +#define TISCI_MSG_RM_UDMAP_TX_CH_GET_CFG 0x1206 +#define TISCI_MSG_RM_UDMAP_RX_CH_CFG 0x1215 +#define TISCI_MSG_RM_UDMAP_RX_CH_GET_CFG 0x1216 +#define TISCI_MSG_RM_UDMAP_FLOW_CFG 0x1230 +#define TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_CFG 0x1231 +#define TISCI_MSG_RM_UDMAP_FLOW_GET_CFG 0x1232 +#define TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_GET_CFG 0x1233 + +/* Processor Control requests */ +#define TI_SCI_MSG_PROC_REQUEST 0xc000 +#define TI_SCI_MSG_PROC_RELEASE 0xc001 +#define TI_SCI_MSG_PROC_HANDOVER 0xc005 +#define TI_SCI_MSG_SET_CONFIG 0xc100 +#define TI_SCI_MSG_SET_CTRL 0xc101 +#define TI_SCI_MSG_GET_STATUS 0xc400 + +/** + * struct ti_sci_msg_hdr - Generic Message Header for All messages and responses + * @type: Type of messages: One of TI_SCI_MSG* values + * @host: Host of the message + * @seq: Message identifier indicating a transfer sequence + * @flags: Flag for the message + */ +struct ti_sci_msg_hdr { + u16 type; + u8 host; + u8 seq; +#define TI_SCI_MSG_FLAG(val) (1 << (val)) +#define TI_SCI_FLAG_REQ_GENERIC_NORESPONSE 0x0 +#define TI_SCI_FLAG_REQ_ACK_ON_RECEIVED TI_SCI_MSG_FLAG(0) +#define TI_SCI_FLAG_REQ_ACK_ON_PROCESSED TI_SCI_MSG_FLAG(1) +#define TI_SCI_FLAG_RESP_GENERIC_NACK 0x0 +#define TI_SCI_FLAG_RESP_GENERIC_ACK TI_SCI_MSG_FLAG(1) + /* Additional Flags */ + u32 flags; +} __packed; + +/** + * struct ti_sci_msg_resp_version - Response for a message + * @hdr: Generic header + * @firmware_description: String describing the firmware + * @firmware_revision: Firmware revision + * @abi_major: Major version of the ABI that firmware supports + * @abi_minor: Minor version of the ABI that firmware supports + * + * In general, ABI version changes follow the rule that minor version increments + * are backward compatible. Major revision changes in ABI may not be + * backward compatible. + * + * Response to a generic message with message type TI_SCI_MSG_VERSION + */ +struct ti_sci_msg_resp_version { + struct ti_sci_msg_hdr hdr; + char firmware_description[32]; + u16 firmware_revision; + u8 abi_major; + u8 abi_minor; +} __packed; + +/** + * struct ti_sci_msg_req_reboot - Reboot the SoC + * @hdr: Generic Header + * + * Request type is TI_SCI_MSG_SYS_RESET, responded with a generic + * ACK/NACK message. + */ +struct ti_sci_msg_req_reboot { + struct ti_sci_msg_hdr hdr; +} __packed; + +/** + * struct ti_sci_msg_req_set_device_state - Set the desired state of the device + * @hdr: Generic header + * @id: Indicates which device to modify + * @reserved: Reserved space in message, must be 0 for backward compatibility + * @state: The desired state of the device. + * + * Certain flags can also be set to alter the device state: + * + MSG_FLAG_DEVICE_WAKE_ENABLED - Configure the device to be a wake source. + * The meaning of this flag will vary slightly from device to device and from + * SoC to SoC but it generally allows the device to wake the SoC out of deep + * suspend states. + * + MSG_FLAG_DEVICE_RESET_ISO - Enable reset isolation for this device. + * + MSG_FLAG_DEVICE_EXCLUSIVE - Claim this device exclusively. When passed + * with STATE_RETENTION or STATE_ON, it will claim the device exclusively. + * If another host already has this device set to STATE_RETENTION or STATE_ON, + * the message will fail. Once successful, other hosts attempting to set + * STATE_RETENTION or STATE_ON will fail. + * + * Request type is TI_SCI_MSG_SET_DEVICE_STATE, responded with a generic + * ACK/NACK message. + */ +struct ti_sci_msg_req_set_device_state { + /* Additional hdr->flags options */ +#define MSG_FLAG_DEVICE_WAKE_ENABLED TI_SCI_MSG_FLAG(8) +#define MSG_FLAG_DEVICE_RESET_ISO TI_SCI_MSG_FLAG(9) +#define MSG_FLAG_DEVICE_EXCLUSIVE TI_SCI_MSG_FLAG(10) + struct ti_sci_msg_hdr hdr; + u32 id; + u32 reserved; + +#define MSG_DEVICE_SW_STATE_AUTO_OFF 0 +#define MSG_DEVICE_SW_STATE_RETENTION 1 +#define MSG_DEVICE_SW_STATE_ON 2 + u8 state; +} __packed; + +/** + * struct ti_sci_msg_req_get_device_state - Request to get device. + * @hdr: Generic header + * @id: Device Identifier + * + * Request type is TI_SCI_MSG_GET_DEVICE_STATE, responded device state + * information + */ +struct ti_sci_msg_req_get_device_state { + struct ti_sci_msg_hdr hdr; + u32 id; +} __packed; + +/** + * struct ti_sci_msg_resp_get_device_state - Response to get device request. + * @hdr: Generic header + * @context_loss_count: Indicates how many times the device has lost context. A + * driver can use this monotonic counter to determine if the device has + * lost context since the last time this message was exchanged. + * @resets: Programmed state of the reset lines. + * @programmed_state: The state as programmed by set_device. + * - Uses the MSG_DEVICE_SW_* macros + * @current_state: The actual state of the hardware. + * + * Response to request TI_SCI_MSG_GET_DEVICE_STATE. + */ +struct ti_sci_msg_resp_get_device_state { + struct ti_sci_msg_hdr hdr; + u32 context_loss_count; + u32 resets; + u8 programmed_state; +#define MSG_DEVICE_HW_STATE_OFF 0 +#define MSG_DEVICE_HW_STATE_ON 1 +#define MSG_DEVICE_HW_STATE_TRANS 2 + u8 current_state; +} __packed; + +/** + * struct ti_sci_msg_req_set_device_resets - Set the desired resets + * configuration of the device + * @hdr: Generic header + * @id: Indicates which device to modify + * @resets: A bit field of resets for the device. The meaning, behavior, + * and usage of the reset flags are device specific. 0 for a bit + * indicates releasing the reset represented by that bit while 1 + * indicates keeping it held. + * + * Request type is TI_SCI_MSG_SET_DEVICE_RESETS, responded with a generic + * ACK/NACK message. + */ +struct ti_sci_msg_req_set_device_resets { + struct ti_sci_msg_hdr hdr; + u32 id; + u32 resets; +} __packed; + +/** + * struct ti_sci_msg_req_set_clock_state - Request to setup a Clock state + * @hdr: Generic Header, Certain flags can be set specific to the clocks: + * MSG_FLAG_CLOCK_ALLOW_SSC: Allow this clock to be modified + * via spread spectrum clocking. + * MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE: Allow this clock's + * frequency to be changed while it is running so long as it + * is within the min/max limits. + * MSG_FLAG_CLOCK_INPUT_TERM: Enable input termination, this + * is only applicable to clock inputs on the SoC pseudo-device. + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. Set to 255 if clock ID is + * greater than or equal to 255. + * @request_state: Request the state for the clock to be set to. + * MSG_CLOCK_SW_STATE_UNREQ: The IP does not require this clock, + * it can be disabled, regardless of the state of the device + * MSG_CLOCK_SW_STATE_AUTO: Allow the System Controller to + * automatically manage the state of this clock. If the device + * is enabled, then the clock is enabled. If the device is set + * to off or retention, then the clock is internally set as not + * being required by the device.(default) + * MSG_CLOCK_SW_STATE_REQ: Configure the clock to be enabled, + * regardless of the state of the device. + * @clk_id_32: Clock identifier for the device for this request. + * Only to be used if the clock ID is greater than or equal to + * 255. + * + * Normally, all required clocks are managed by TISCI entity, this is used + * only for specific control *IF* required. Auto managed state is + * MSG_CLOCK_SW_STATE_AUTO, in other states, TISCI entity assume remote + * will explicitly control. + * + * Request type is TI_SCI_MSG_SET_CLOCK_STATE, response is a generic + * ACK or NACK message. + */ +struct ti_sci_msg_req_set_clock_state { + /* Additional hdr->flags options */ +#define MSG_FLAG_CLOCK_ALLOW_SSC TI_SCI_MSG_FLAG(8) +#define MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE TI_SCI_MSG_FLAG(9) +#define MSG_FLAG_CLOCK_INPUT_TERM TI_SCI_MSG_FLAG(10) + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u8 clk_id; +#define MSG_CLOCK_SW_STATE_UNREQ 0 +#define MSG_CLOCK_SW_STATE_AUTO 1 +#define MSG_CLOCK_SW_STATE_REQ 2 + u8 request_state; + u32 clk_id_32; +} __packed; + +/** + * struct ti_sci_msg_req_get_clock_state - Request for clock state + * @hdr: Generic Header + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to get state of. Set to 255 if the clock + * ID is greater than or equal to 255. + * @clk_id_32: Clock identifier for the device for the request. + * Only to be used if the clock ID is greater than or equal to + * 255. + * + * Request type is TI_SCI_MSG_GET_CLOCK_STATE, response is state + * of the clock + */ +struct ti_sci_msg_req_get_clock_state { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u8 clk_id; + u32 clk_id_32; +} __packed; + +/** + * struct ti_sci_msg_resp_get_clock_state - Response to get clock state + * @hdr: Generic Header + * @programmed_state: Any programmed state of the clock. This is one of + * MSG_CLOCK_SW_STATE* values. + * @current_state: Current state of the clock. This is one of: + * MSG_CLOCK_HW_STATE_NOT_READY: Clock is not ready + * MSG_CLOCK_HW_STATE_READY: Clock is ready + * + * Response to TI_SCI_MSG_GET_CLOCK_STATE. + */ +struct ti_sci_msg_resp_get_clock_state { + struct ti_sci_msg_hdr hdr; + u8 programmed_state; +#define MSG_CLOCK_HW_STATE_NOT_READY 0 +#define MSG_CLOCK_HW_STATE_READY 1 + u8 current_state; +} __packed; + +/** + * struct ti_sci_msg_req_set_clock_parent - Set the clock parent + * @hdr: Generic Header + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. Set to 255 if clock ID is + * greater than or equal to 255. + * @parent_id: The new clock parent is selectable by an index via this + * parameter. Set to 255 if clock ID is greater than or + * equal to 255. + * @clk_id_32: Clock identifier if @clk_id field is 255. + * @parent_id_32: Parent identifier if @parent_id is 255. + * + * Request type is TI_SCI_MSG_SET_CLOCK_PARENT, response is generic + * ACK / NACK message. + */ +struct ti_sci_msg_req_set_clock_parent { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u8 clk_id; + u8 parent_id; + u32 clk_id_32; + u32 parent_id_32; +} __packed; + +/** + * struct ti_sci_msg_req_get_clock_parent - Get the clock parent + * @hdr: Generic Header + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to get the parent for. If this field + * contains 255, the actual clock identifier is stored in + * @clk_id_32. + * @clk_id_32: Clock identifier if the @clk_id field contains 255. + * + * Request type is TI_SCI_MSG_GET_CLOCK_PARENT, response is parent information + */ +struct ti_sci_msg_req_get_clock_parent { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u8 clk_id; + u32 clk_id_32; +} __packed; + +/** + * struct ti_sci_msg_resp_get_clock_parent - Response with clock parent + * @hdr: Generic Header + * @parent_id: The current clock parent. If set to 255, the current parent + * ID can be found from the @parent_id_32 field. + * @parent_id_32: Current clock parent if @parent_id field is set to + * 255. + * + * Response to TI_SCI_MSG_GET_CLOCK_PARENT. + */ +struct ti_sci_msg_resp_get_clock_parent { + struct ti_sci_msg_hdr hdr; + u8 parent_id; + u32 parent_id_32; +} __packed; + +/** + * struct ti_sci_msg_req_get_clock_num_parents - Request to get clock parents + * @hdr: Generic header + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. Set to + * 255 if clock ID is greater than or equal to 255. + * @clk_id_32: Clock identifier if the @clk_id field contains 255. + * + * This request provides information about how many clock parent options + * are available for a given clock to a device. This is typically used + * for input clocks. + * + * Request type is TI_SCI_MSG_GET_NUM_CLOCK_PARENTS, response is appropriate + * message, or NACK in case of inability to satisfy request. + */ +struct ti_sci_msg_req_get_clock_num_parents { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u8 clk_id; + u32 clk_id_32; +} __packed; + +/** + * struct ti_sci_msg_resp_get_clock_num_parents - Response for get clk parents + * @hdr: Generic header + * @num_parents: Number of clock parents. If set to 255, the actual + * number of parents is stored into @num_parents_32 + * field instead. + * @num_parents_32: Number of clock parents if @num_parents field is + * set to 255. + * + * Response to TI_SCI_MSG_GET_NUM_CLOCK_PARENTS + */ +struct ti_sci_msg_resp_get_clock_num_parents { + struct ti_sci_msg_hdr hdr; + u8 num_parents; + u32 num_parents_32; +} __packed; + +/** + * struct ti_sci_msg_req_query_clock_freq - Request to query a frequency + * @hdr: Generic Header + * @dev_id: Device identifier this request is for + * @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @target_freq_hz: The target clock frequency. A frequency will be found + * as close to this target frequency as possible. + * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @clk_id: Clock identifier for the device for this request. Set to + * 255 if clock identifier is greater than or equal to 255. + * @clk_id_32: Clock identifier if @clk_id is set to 255. + * + * NOTE: Normally clock frequency management is automatically done by TISCI + * entity. In case of specific requests, TISCI evaluates capability to achieve + * requested frequency within provided range and responds with + * result message. + * + * Request type is TI_SCI_MSG_QUERY_CLOCK_FREQ, response is appropriate message, + * or NACK in case of inability to satisfy request. + */ +struct ti_sci_msg_req_query_clock_freq { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u64 min_freq_hz; + u64 target_freq_hz; + u64 max_freq_hz; + u8 clk_id; + u32 clk_id_32; +} __packed; + +/** + * struct ti_sci_msg_resp_query_clock_freq - Response to a clock frequency query + * @hdr: Generic Header + * @freq_hz: Frequency that is the best match in Hz. + * + * Response to request type TI_SCI_MSG_QUERY_CLOCK_FREQ. NOTE: if the request + * cannot be satisfied, the message will be of type NACK. + */ +struct ti_sci_msg_resp_query_clock_freq { + struct ti_sci_msg_hdr hdr; + u64 freq_hz; +} __packed; + +/** + * struct ti_sci_msg_req_set_clock_freq - Request to setup a clock frequency + * @hdr: Generic Header + * @dev_id: Device identifier this request is for + * @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @target_freq_hz: The target clock frequency. The clock will be programmed + * at a rate as close to this target frequency as possible. + * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @clk_id: Clock identifier for the device for this request. Set to + * 255 if clock ID is greater than or equal to 255. + * @clk_id_32: Clock identifier if @clk_id field is set to 255. + * + * NOTE: Normally clock frequency management is automatically done by TISCI + * entity. In case of specific requests, TISCI evaluates capability to achieve + * requested range and responds with success/failure message. + * + * This sets the desired frequency for a clock within an allowable + * range. This message will fail on an enabled clock unless + * MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE is set for the clock. Additionally, + * if other clocks have their frequency modified due to this message, + * they also must have the MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE or be disabled. + * + * Calling set frequency on a clock input to the SoC pseudo-device will + * inform the PMMC of that clock's frequency. Setting a frequency of + * zero will indicate the clock is disabled. + * + * Calling set frequency on clock outputs from the SoC pseudo-device will + * function similarly to setting the clock frequency on a device. + * + * Request type is TI_SCI_MSG_SET_CLOCK_FREQ, response is a generic ACK/NACK + * message. + */ +struct ti_sci_msg_req_set_clock_freq { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u64 min_freq_hz; + u64 target_freq_hz; + u64 max_freq_hz; + u8 clk_id; + u32 clk_id_32; +} __packed; + +/** + * struct ti_sci_msg_req_get_clock_freq - Request to get the clock frequency + * @hdr: Generic Header + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. Set to + * 255 if clock ID is greater than or equal to 255. + * @clk_id_32: Clock identifier if @clk_id field is set to 255. + * + * NOTE: Normally clock frequency management is automatically done by TISCI + * entity. In some cases, clock frequencies are configured by host. + * + * Request type is TI_SCI_MSG_GET_CLOCK_FREQ, responded with clock frequency + * that the clock is currently at. + */ +struct ti_sci_msg_req_get_clock_freq { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u8 clk_id; + u32 clk_id_32; +} __packed; + +/** + * struct ti_sci_msg_resp_get_clock_freq - Response of clock frequency request + * @hdr: Generic Header + * @freq_hz: Frequency that the clock is currently on, in Hz. + * + * Response to request type TI_SCI_MSG_GET_CLOCK_FREQ. + */ +struct ti_sci_msg_resp_get_clock_freq { + struct ti_sci_msg_hdr hdr; + u64 freq_hz; +} __packed; + +#define TI_SCI_IRQ_SECONDARY_HOST_INVALID 0xff + +/** + * struct ti_sci_msg_req_get_resource_range - Request to get a host's assigned + * range of resources. + * @hdr: Generic Header + * @type: Unique resource assignment type + * @subtype: Resource assignment subtype within the resource type. + * @secondary_host: Host processing entity to which the resources are + * allocated. This is required only when the destination + * host id id different from ti sci interface host id, + * else TI_SCI_IRQ_SECONDARY_HOST_INVALID can be passed. + * + * Request type is TI_SCI_MSG_GET_RESOURCE_RANGE. Responded with requested + * resource range which is of type TI_SCI_MSG_GET_RESOURCE_RANGE. + */ +struct ti_sci_msg_req_get_resource_range { + struct ti_sci_msg_hdr hdr; +#define MSG_RM_RESOURCE_TYPE_MASK GENMASK(9, 0) +#define MSG_RM_RESOURCE_SUBTYPE_MASK GENMASK(5, 0) + u16 type; + u8 subtype; + u8 secondary_host; +} __packed; + +/** + * struct ti_sci_msg_resp_get_resource_range - Response to resource get range. + * @hdr: Generic Header + * @range_start: Start index of the first resource range. + * @range_num: Number of resources in the first range. + * @range_start_sec: Start index of the second resource range. + * @range_num_sec: Number of resources in the second range. + * + * Response to request TI_SCI_MSG_GET_RESOURCE_RANGE. + */ +struct ti_sci_msg_resp_get_resource_range { + struct ti_sci_msg_hdr hdr; + u16 range_start; + u16 range_num; + u16 range_start_sec; + u16 range_num_sec; +} __packed; + +/** + * struct ti_sci_msg_req_manage_irq - Request to configure/release the route + * between the dev and the host. + * @hdr: Generic Header + * @valid_params: Bit fields defining the validity of interrupt source + * parameters. If a bit is not set, then corresponding + * field is not valid and will not be used for route set. + * Bit field definitions: + * 0 - Valid bit for @dst_id + * 1 - Valid bit for @dst_host_irq + * 2 - Valid bit for @ia_id + * 3 - Valid bit for @vint + * 4 - Valid bit for @global_event + * 5 - Valid bit for @vint_status_bit_index + * 31 - Valid bit for @secondary_host + * @src_id: IRQ source peripheral ID. + * @src_index: IRQ source index within the peripheral + * @dst_id: IRQ Destination ID. Based on the architecture it can be + * IRQ controller or host processor ID. + * @dst_host_irq: IRQ number of the destination host IRQ controller + * @ia_id: Device ID of the interrupt aggregator in which the + * vint resides. + * @vint: Virtual interrupt number if the interrupt route + * is through an interrupt aggregator. + * @global_event: Global event that is to be mapped to interrupt + * aggregator virtual interrupt status bit. + * @vint_status_bit: Virtual interrupt status bit if the interrupt route + * utilizes an interrupt aggregator status bit. + * @secondary_host: Host ID of the IRQ destination computing entity. This is + * required only when destination host id is different + * from ti sci interface host id. + * + * Request type is TI_SCI_MSG_SET/RELEASE_IRQ. + * Response is generic ACK / NACK message. + */ +struct ti_sci_msg_req_manage_irq { + struct ti_sci_msg_hdr hdr; +#define MSG_FLAG_DST_ID_VALID TI_SCI_MSG_FLAG(0) +#define MSG_FLAG_DST_HOST_IRQ_VALID TI_SCI_MSG_FLAG(1) +#define MSG_FLAG_IA_ID_VALID TI_SCI_MSG_FLAG(2) +#define MSG_FLAG_VINT_VALID TI_SCI_MSG_FLAG(3) +#define MSG_FLAG_GLB_EVNT_VALID TI_SCI_MSG_FLAG(4) +#define MSG_FLAG_VINT_STS_BIT_VALID TI_SCI_MSG_FLAG(5) +#define MSG_FLAG_SHOST_VALID TI_SCI_MSG_FLAG(31) + u32 valid_params; + u16 src_id; + u16 src_index; + u16 dst_id; + u16 dst_host_irq; + u16 ia_id; + u16 vint; + u16 global_event; + u8 vint_status_bit; + u8 secondary_host; +} __packed; + +/** + * struct ti_sci_msg_rm_ring_cfg_req - Configure a Navigator Subsystem ring + * + * Configures the non-real-time registers of a Navigator Subsystem ring. + * @hdr: Generic Header + * @valid_params: Bitfield defining validity of ring configuration parameters. + * The ring configuration fields are not valid, and will not be used for + * ring configuration, if their corresponding valid bit is zero. + * Valid bit usage: + * 0 - Valid bit for @tisci_msg_rm_ring_cfg_req addr_lo + * 1 - Valid bit for @tisci_msg_rm_ring_cfg_req addr_hi + * 2 - Valid bit for @tisci_msg_rm_ring_cfg_req count + * 3 - Valid bit for @tisci_msg_rm_ring_cfg_req mode + * 4 - Valid bit for @tisci_msg_rm_ring_cfg_req size + * 5 - Valid bit for @tisci_msg_rm_ring_cfg_req order_id + * 6 - Valid bit for @tisci_msg_rm_ring_cfg_req virtid + * 7 - Valid bit for @tisci_msg_rm_ring_cfg_req ASEL + * @nav_id: Device ID of Navigator Subsystem from which the ring is allocated + * @index: ring index to be configured. + * @addr_lo: 32 LSBs of ring base address to be programmed into the ring's + * RING_BA_LO register + * @addr_hi: 16 MSBs of ring base address to be programmed into the ring's + * RING_BA_HI register. + * @count: Number of ring elements. Must be even if mode is CREDENTIALS or QM + * modes. + * @mode: Specifies the mode the ring is to be configured. + * @size: Specifies encoded ring element size. To calculate the encoded size use + * the formula (log2(size_bytes) - 2), where size_bytes cannot be + * greater than 256. + * @order_id: Specifies the ring's bus order ID. + * @virtid: Ring virt ID value + * @asel: Ring ASEL (address select) value to be set into the ASEL field of the + * ring's RING_BA_HI register. + */ +struct ti_sci_msg_rm_ring_cfg_req { + struct ti_sci_msg_hdr hdr; + u32 valid_params; + u16 nav_id; + u16 index; + u32 addr_lo; + u32 addr_hi; + u32 count; + u8 mode; + u8 size; + u8 order_id; + u16 virtid; + u8 asel; +} __packed; + +/** + * struct ti_sci_msg_psil_pair - Pairs a PSI-L source thread to a destination + * thread + * @hdr: Generic Header + * @nav_id: SoC Navigator Subsystem device ID whose PSI-L config proxy is + * used to pair the source and destination threads. + * @src_thread: PSI-L source thread ID within the PSI-L System thread map. + * + * UDMAP transmit channels mapped to source threads will have their + * TCHAN_THRD_ID register programmed with the destination thread if the pairing + * is successful. + + * @dst_thread: PSI-L destination thread ID within the PSI-L System thread map. + * PSI-L destination threads start at index 0x8000. The request is NACK'd if + * the destination thread is not greater than or equal to 0x8000. + * + * UDMAP receive channels mapped to destination threads will have their + * RCHAN_THRD_ID register programmed with the source thread if the pairing + * is successful. + * + * Request type is TI_SCI_MSG_RM_PSIL_PAIR, response is a generic ACK or NACK + * message. + */ +struct ti_sci_msg_psil_pair { + struct ti_sci_msg_hdr hdr; + u32 nav_id; + u32 src_thread; + u32 dst_thread; +} __packed; + +/** + * struct ti_sci_msg_psil_unpair - Unpairs a PSI-L source thread from a + * destination thread + * @hdr: Generic Header + * @nav_id: SoC Navigator Subsystem device ID whose PSI-L config proxy is + * used to unpair the source and destination threads. + * @src_thread: PSI-L source thread ID within the PSI-L System thread map. + * + * UDMAP transmit channels mapped to source threads will have their + * TCHAN_THRD_ID register cleared if the unpairing is successful. + * + * @dst_thread: PSI-L destination thread ID within the PSI-L System thread map. + * PSI-L destination threads start at index 0x8000. The request is NACK'd if + * the destination thread is not greater than or equal to 0x8000. + * + * UDMAP receive channels mapped to destination threads will have their + * RCHAN_THRD_ID register cleared if the unpairing is successful. + * + * Request type is TI_SCI_MSG_RM_PSIL_UNPAIR, response is a generic ACK or NACK + * message. + */ +struct ti_sci_msg_psil_unpair { + struct ti_sci_msg_hdr hdr; + u32 nav_id; + u32 src_thread; + u32 dst_thread; +} __packed; + +/** + * struct ti_sci_msg_udmap_rx_flow_cfg - UDMAP receive flow configuration + * message + * @hdr: Generic Header + * @nav_id: SoC Navigator Subsystem device ID from which the receive flow is + * allocated + * @flow_index: UDMAP receive flow index for non-optional configuration. + * @rx_ch_index: Specifies the index of the receive channel using the flow_index + * @rx_einfo_present: UDMAP receive flow extended packet info present. + * @rx_psinfo_present: UDMAP receive flow PS words present. + * @rx_error_handling: UDMAP receive flow error handling configuration. Valid + * values are TI_SCI_RM_UDMAP_RX_FLOW_ERR_DROP/RETRY. + * @rx_desc_type: UDMAP receive flow descriptor type. It can be one of + * TI_SCI_RM_UDMAP_RX_FLOW_DESC_HOST/MONO. + * @rx_sop_offset: UDMAP receive flow start of packet offset. + * @rx_dest_qnum: UDMAP receive flow destination queue number. + * @rx_ps_location: UDMAP receive flow PS words location. + * 0 - end of packet descriptor + * 1 - Beginning of the data buffer + * @rx_src_tag_hi: UDMAP receive flow source tag high byte constant + * @rx_src_tag_lo: UDMAP receive flow source tag low byte constant + * @rx_dest_tag_hi: UDMAP receive flow destination tag high byte constant + * @rx_dest_tag_lo: UDMAP receive flow destination tag low byte constant + * @rx_src_tag_hi_sel: UDMAP receive flow source tag high byte selector + * @rx_src_tag_lo_sel: UDMAP receive flow source tag low byte selector + * @rx_dest_tag_hi_sel: UDMAP receive flow destination tag high byte selector + * @rx_dest_tag_lo_sel: UDMAP receive flow destination tag low byte selector + * @rx_size_thresh_en: UDMAP receive flow packet size based free buffer queue + * enable. If enabled, the ti_sci_rm_udmap_rx_flow_opt_cfg also need to be + * configured and sent. + * @rx_fdq0_sz0_qnum: UDMAP receive flow free descriptor queue 0. + * @rx_fdq1_qnum: UDMAP receive flow free descriptor queue 1. + * @rx_fdq2_qnum: UDMAP receive flow free descriptor queue 2. + * @rx_fdq3_qnum: UDMAP receive flow free descriptor queue 3. + * + * For detailed information on the settings, see the UDMAP section of the TRM. + */ +struct ti_sci_msg_udmap_rx_flow_cfg { + struct ti_sci_msg_hdr hdr; + u32 nav_id; + u32 flow_index; + u32 rx_ch_index; + u8 rx_einfo_present; + u8 rx_psinfo_present; + u8 rx_error_handling; + u8 rx_desc_type; + u16 rx_sop_offset; + u16 rx_dest_qnum; + u8 rx_ps_location; + u8 rx_src_tag_hi; + u8 rx_src_tag_lo; + u8 rx_dest_tag_hi; + u8 rx_dest_tag_lo; + u8 rx_src_tag_hi_sel; + u8 rx_src_tag_lo_sel; + u8 rx_dest_tag_hi_sel; + u8 rx_dest_tag_lo_sel; + u8 rx_size_thresh_en; + u16 rx_fdq0_sz0_qnum; + u16 rx_fdq1_qnum; + u16 rx_fdq2_qnum; + u16 rx_fdq3_qnum; +} __packed; + +/** + * struct rm_ti_sci_msg_udmap_rx_flow_opt_cfg - parameters for UDMAP receive + * flow optional configuration + * @hdr: Generic Header + * @nav_id: SoC Navigator Subsystem device ID from which the receive flow is + * allocated + * @flow_index: UDMAP receive flow index for optional configuration. + * @rx_ch_index: Specifies the index of the receive channel using the flow_index + * @rx_size_thresh0: UDMAP receive flow packet size threshold 0. + * @rx_size_thresh1: UDMAP receive flow packet size threshold 1. + * @rx_size_thresh2: UDMAP receive flow packet size threshold 2. + * @rx_fdq0_sz1_qnum: UDMAP receive flow free descriptor queue for size + * threshold 1. + * @rx_fdq0_sz2_qnum: UDMAP receive flow free descriptor queue for size + * threshold 2. + * @rx_fdq0_sz3_qnum: UDMAP receive flow free descriptor queue for size + * threshold 3. + * + * For detailed information on the settings, see the UDMAP section of the TRM. + */ +struct rm_ti_sci_msg_udmap_rx_flow_opt_cfg { + struct ti_sci_msg_hdr hdr; + u32 nav_id; + u32 flow_index; + u32 rx_ch_index; + u16 rx_size_thresh0; + u16 rx_size_thresh1; + u16 rx_size_thresh2; + u16 rx_fdq0_sz1_qnum; + u16 rx_fdq0_sz2_qnum; + u16 rx_fdq0_sz3_qnum; +} __packed; + +/** + * Configures a Navigator Subsystem UDMAP transmit channel + * + * Configures the non-real-time registers of a Navigator Subsystem UDMAP + * transmit channel. The channel index must be assigned to the host defined + * in the TISCI header via the RM board configuration resource assignment + * range list. + * + * @hdr: Generic Header + * + * @valid_params: Bitfield defining validity of tx channel configuration + * parameters. The tx channel configuration fields are not valid, and will not + * be used for ch configuration, if their corresponding valid bit is zero. + * Valid bit usage: + * 0 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_pause_on_err + * 1 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_atype + * 2 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_chan_type + * 3 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_fetch_size + * 4 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::txcq_qnum + * 5 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_priority + * 6 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_qos + * 7 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_orderid + * 8 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_sched_priority + * 9 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_filt_einfo + * 10 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_filt_pswords + * 11 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_supr_tdpkt + * 12 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_credit_count + * 13 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::fdepth + * 14 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_burst_size + * 15 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_tdtype + * 16 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::extended_ch_type + * + * @nav_id: SoC device ID of Navigator Subsystem where tx channel is located + * + * @index: UDMAP transmit channel index. + * + * @tx_pause_on_err: UDMAP transmit channel pause on error configuration to + * be programmed into the tx_pause_on_err field of the channel's TCHAN_TCFG + * register. + * + * @tx_filt_einfo: UDMAP transmit channel extended packet information passing + * configuration to be programmed into the tx_filt_einfo field of the + * channel's TCHAN_TCFG register. + * + * @tx_filt_pswords: UDMAP transmit channel protocol specific word passing + * configuration to be programmed into the tx_filt_pswords field of the + * channel's TCHAN_TCFG register. + * + * @tx_atype: UDMAP transmit channel non Ring Accelerator access pointer + * interpretation configuration to be programmed into the tx_atype field of + * the channel's TCHAN_TCFG register. + * + * @tx_chan_type: UDMAP transmit channel functional channel type and work + * passing mechanism configuration to be programmed into the tx_chan_type + * field of the channel's TCHAN_TCFG register. + * + * @tx_supr_tdpkt: UDMAP transmit channel teardown packet generation suppression + * configuration to be programmed into the tx_supr_tdpkt field of the channel's + * TCHAN_TCFG register. + * + * @tx_fetch_size: UDMAP transmit channel number of 32-bit descriptor words to + * fetch configuration to be programmed into the tx_fetch_size field of the + * channel's TCHAN_TCFG register. The user must make sure to set the maximum + * word count that can pass through the channel for any allowed descriptor type. + * + * @tx_credit_count: UDMAP transmit channel transfer request credit count + * configuration to be programmed into the count field of the TCHAN_TCREDIT + * register. Specifies how many credits for complete TRs are available. + * + * @txcq_qnum: UDMAP transmit channel completion queue configuration to be + * programmed into the txcq_qnum field of the TCHAN_TCQ register. The specified + * completion queue must be assigned to the host, or a subordinate of the host, + * requesting configuration of the transmit channel. + * + * @tx_priority: UDMAP transmit channel transmit priority value to be programmed + * into the priority field of the channel's TCHAN_TPRI_CTRL register. + * + * @tx_qos: UDMAP transmit channel transmit qos value to be programmed into the + * qos field of the channel's TCHAN_TPRI_CTRL register. + * + * @tx_orderid: UDMAP transmit channel bus order id value to be programmed into + * the orderid field of the channel's TCHAN_TPRI_CTRL register. + * + * @fdepth: UDMAP transmit channel FIFO depth configuration to be programmed + * into the fdepth field of the TCHAN_TFIFO_DEPTH register. Sets the number of + * Tx FIFO bytes which are allowed to be stored for the channel. Check the UDMAP + * section of the TRM for restrictions regarding this parameter. + * + * @tx_sched_priority: UDMAP transmit channel tx scheduling priority + * configuration to be programmed into the priority field of the channel's + * TCHAN_TST_SCHED register. + * + * @tx_burst_size: UDMAP transmit channel burst size configuration to be + * programmed into the tx_burst_size field of the TCHAN_TCFG register. + * + * @tx_tdtype: UDMAP transmit channel teardown type configuration to be + * programmed into the tdtype field of the TCHAN_TCFG register: + * 0 - Return immediately + * 1 - Wait for completion message from remote peer + * + * @extended_ch_type: Valid for BCDMA. + * 0 - the channel is split tx channel (tchan) + * 1 - the channel is block copy channel (bchan) + */ +struct ti_sci_msg_rm_udmap_tx_ch_cfg_req { + struct ti_sci_msg_hdr hdr; + u32 valid_params; + u16 nav_id; + u16 index; + u8 tx_pause_on_err; + u8 tx_filt_einfo; + u8 tx_filt_pswords; + u8 tx_atype; + u8 tx_chan_type; + u8 tx_supr_tdpkt; + u16 tx_fetch_size; + u8 tx_credit_count; + u16 txcq_qnum; + u8 tx_priority; + u8 tx_qos; + u8 tx_orderid; + u16 fdepth; + u8 tx_sched_priority; + u8 tx_burst_size; + u8 tx_tdtype; + u8 extended_ch_type; +} __packed; + +/** + * Configures a Navigator Subsystem UDMAP receive channel + * + * Configures the non-real-time registers of a Navigator Subsystem UDMAP + * receive channel. The channel index must be assigned to the host defined + * in the TISCI header via the RM board configuration resource assignment + * range list. + * + * @hdr: Generic Header + * + * @valid_params: Bitfield defining validity of rx channel configuration + * parameters. + * The rx channel configuration fields are not valid, and will not be used for + * ch configuration, if their corresponding valid bit is zero. + * Valid bit usage: + * 0 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_pause_on_err + * 1 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_atype + * 2 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_chan_type + * 3 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_fetch_size + * 4 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rxcq_qnum + * 5 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_priority + * 6 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_qos + * 7 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_orderid + * 8 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_sched_priority + * 9 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::flowid_start + * 10 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::flowid_cnt + * 11 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_ignore_short + * 12 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_ignore_long + * 14 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_burst_size + * + * @nav_id: SoC device ID of Navigator Subsystem where rx channel is located + * + * @index: UDMAP receive channel index. + * + * @rx_fetch_size: UDMAP receive channel number of 32-bit descriptor words to + * fetch configuration to be programmed into the rx_fetch_size field of the + * channel's RCHAN_RCFG register. + * + * @rxcq_qnum: UDMAP receive channel completion queue configuration to be + * programmed into the rxcq_qnum field of the RCHAN_RCQ register. + * The specified completion queue must be assigned to the host, or a subordinate + * of the host, requesting configuration of the receive channel. + * + * @rx_priority: UDMAP receive channel receive priority value to be programmed + * into the priority field of the channel's RCHAN_RPRI_CTRL register. + * + * @rx_qos: UDMAP receive channel receive qos value to be programmed into the + * qos field of the channel's RCHAN_RPRI_CTRL register. + * + * @rx_orderid: UDMAP receive channel bus order id value to be programmed into + * the orderid field of the channel's RCHAN_RPRI_CTRL register. + * + * @rx_sched_priority: UDMAP receive channel rx scheduling priority + * configuration to be programmed into the priority field of the channel's + * RCHAN_RST_SCHED register. + * + * @flowid_start: UDMAP receive channel additional flows starting index + * configuration to program into the flow_start field of the RCHAN_RFLOW_RNG + * register. Specifies the starting index for flow IDs the receive channel is to + * make use of beyond the default flow. flowid_start and @ref flowid_cnt must be + * set as valid and configured together. The starting flow ID set by + * @ref flowid_cnt must be a flow index within the Navigator Subsystem's subset + * of flows beyond the default flows statically mapped to receive channels. + * The additional flows must be assigned to the host, or a subordinate of the + * host, requesting configuration of the receive channel. + * + * @flowid_cnt: UDMAP receive channel additional flows count configuration to + * program into the flowid_cnt field of the RCHAN_RFLOW_RNG register. + * This field specifies how many flow IDs are in the additional contiguous range + * of legal flow IDs for the channel. @ref flowid_start and flowid_cnt must be + * set as valid and configured together. Disabling the valid_params field bit + * for flowid_cnt indicates no flow IDs other than the default are to be + * allocated and used by the receive channel. @ref flowid_start plus flowid_cnt + * cannot be greater than the number of receive flows in the receive channel's + * Navigator Subsystem. The additional flows must be assigned to the host, or a + * subordinate of the host, requesting configuration of the receive channel. + * + * @rx_pause_on_err: UDMAP receive channel pause on error configuration to be + * programmed into the rx_pause_on_err field of the channel's RCHAN_RCFG + * register. + * + * @rx_atype: UDMAP receive channel non Ring Accelerator access pointer + * interpretation configuration to be programmed into the rx_atype field of the + * channel's RCHAN_RCFG register. + * + * @rx_chan_type: UDMAP receive channel functional channel type and work passing + * mechanism configuration to be programmed into the rx_chan_type field of the + * channel's RCHAN_RCFG register. + * + * @rx_ignore_short: UDMAP receive channel short packet treatment configuration + * to be programmed into the rx_ignore_short field of the RCHAN_RCFG register. + * + * @rx_ignore_long: UDMAP receive channel long packet treatment configuration to + * be programmed into the rx_ignore_long field of the RCHAN_RCFG register. + * + * @rx_burst_size: UDMAP receive channel burst size configuration to be + * programmed into the rx_burst_size field of the RCHAN_RCFG register. + */ +struct ti_sci_msg_rm_udmap_rx_ch_cfg_req { + struct ti_sci_msg_hdr hdr; + u32 valid_params; + u16 nav_id; + u16 index; + u16 rx_fetch_size; + u16 rxcq_qnum; + u8 rx_priority; + u8 rx_qos; + u8 rx_orderid; + u8 rx_sched_priority; + u16 flowid_start; + u16 flowid_cnt; + u8 rx_pause_on_err; + u8 rx_atype; + u8 rx_chan_type; + u8 rx_ignore_short; + u8 rx_ignore_long; + u8 rx_burst_size; +} __packed; + +/** + * Configures a Navigator Subsystem UDMAP receive flow + * + * Configures a Navigator Subsystem UDMAP receive flow's registers. + * Configuration does not include the flow registers which handle size-based + * free descriptor queue routing. + * + * The flow index must be assigned to the host defined in the TISCI header via + * the RM board configuration resource assignment range list. + * + * @hdr: Standard TISCI header + * + * @valid_params + * Bitfield defining validity of rx flow configuration parameters. The + * rx flow configuration fields are not valid, and will not be used for flow + * configuration, if their corresponding valid bit is zero. Valid bit usage: + * 0 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_einfo_present + * 1 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_psinfo_present + * 2 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_error_handling + * 3 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_desc_type + * 4 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_sop_offset + * 5 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_qnum + * 6 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_hi + * 7 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_lo + * 8 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_hi + * 9 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_lo + * 10 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_hi_sel + * 11 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_lo_sel + * 12 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_hi_sel + * 13 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_lo_sel + * 14 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq0_sz0_qnum + * 15 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq1_sz0_qnum + * 16 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq2_sz0_qnum + * 17 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq3_sz0_qnum + * 18 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_ps_location + * + * @nav_id: SoC device ID of Navigator Subsystem from which the receive flow is + * allocated + * + * @flow_index: UDMAP receive flow index for non-optional configuration. + * + * @rx_einfo_present: + * UDMAP receive flow extended packet info present configuration to be + * programmed into the rx_einfo_present field of the flow's RFLOW_RFA register. + * + * @rx_psinfo_present: + * UDMAP receive flow PS words present configuration to be programmed into the + * rx_psinfo_present field of the flow's RFLOW_RFA register. + * + * @rx_error_handling: + * UDMAP receive flow error handling configuration to be programmed into the + * rx_error_handling field of the flow's RFLOW_RFA register. + * + * @rx_desc_type: + * UDMAP receive flow descriptor type configuration to be programmed into the + * rx_desc_type field field of the flow's RFLOW_RFA register. + * + * @rx_sop_offset: + * UDMAP receive flow start of packet offset configuration to be programmed + * into the rx_sop_offset field of the RFLOW_RFA register. See the UDMAP + * section of the TRM for more information on this setting. Valid values for + * this field are 0-255 bytes. + * + * @rx_dest_qnum: + * UDMAP receive flow destination queue configuration to be programmed into the + * rx_dest_qnum field of the flow's RFLOW_RFA register. The specified + * destination queue must be valid within the Navigator Subsystem and must be + * owned by the host, or a subordinate of the host, requesting allocation and + * configuration of the receive flow. + * + * @rx_src_tag_hi: + * UDMAP receive flow source tag high byte constant configuration to be + * programmed into the rx_src_tag_hi field of the flow's RFLOW_RFB register. + * See the UDMAP section of the TRM for more information on this setting. + * + * @rx_src_tag_lo: + * UDMAP receive flow source tag low byte constant configuration to be + * programmed into the rx_src_tag_lo field of the flow's RFLOW_RFB register. + * See the UDMAP section of the TRM for more information on this setting. + * + * @rx_dest_tag_hi: + * UDMAP receive flow destination tag high byte constant configuration to be + * programmed into the rx_dest_tag_hi field of the flow's RFLOW_RFB register. + * See the UDMAP section of the TRM for more information on this setting. + * + * @rx_dest_tag_lo: + * UDMAP receive flow destination tag low byte constant configuration to be + * programmed into the rx_dest_tag_lo field of the flow's RFLOW_RFB register. + * See the UDMAP section of the TRM for more information on this setting. + * + * @rx_src_tag_hi_sel: + * UDMAP receive flow source tag high byte selector configuration to be + * programmed into the rx_src_tag_hi_sel field of the RFLOW_RFC register. See + * the UDMAP section of the TRM for more information on this setting. + * + * @rx_src_tag_lo_sel: + * UDMAP receive flow source tag low byte selector configuration to be + * programmed into the rx_src_tag_lo_sel field of the RFLOW_RFC register. See + * the UDMAP section of the TRM for more information on this setting. + * + * @rx_dest_tag_hi_sel: + * UDMAP receive flow destination tag high byte selector configuration to be + * programmed into the rx_dest_tag_hi_sel field of the RFLOW_RFC register. See + * the UDMAP section of the TRM for more information on this setting. + * + * @rx_dest_tag_lo_sel: + * UDMAP receive flow destination tag low byte selector configuration to be + * programmed into the rx_dest_tag_lo_sel field of the RFLOW_RFC register. See + * the UDMAP section of the TRM for more information on this setting. + * + * @rx_fdq0_sz0_qnum: + * UDMAP receive flow free descriptor queue 0 configuration to be programmed + * into the rx_fdq0_sz0_qnum field of the flow's RFLOW_RFD register. See the + * UDMAP section of the TRM for more information on this setting. The specified + * free queue must be valid within the Navigator Subsystem and must be owned + * by the host, or a subordinate of the host, requesting allocation and + * configuration of the receive flow. + * + * @rx_fdq1_qnum: + * UDMAP receive flow free descriptor queue 1 configuration to be programmed + * into the rx_fdq1_qnum field of the flow's RFLOW_RFD register. See the + * UDMAP section of the TRM for more information on this setting. The specified + * free queue must be valid within the Navigator Subsystem and must be owned + * by the host, or a subordinate of the host, requesting allocation and + * configuration of the receive flow. + * + * @rx_fdq2_qnum: + * UDMAP receive flow free descriptor queue 2 configuration to be programmed + * into the rx_fdq2_qnum field of the flow's RFLOW_RFE register. See the + * UDMAP section of the TRM for more information on this setting. The specified + * free queue must be valid within the Navigator Subsystem and must be owned + * by the host, or a subordinate of the host, requesting allocation and + * configuration of the receive flow. + * + * @rx_fdq3_qnum: + * UDMAP receive flow free descriptor queue 3 configuration to be programmed + * into the rx_fdq3_qnum field of the flow's RFLOW_RFE register. See the + * UDMAP section of the TRM for more information on this setting. The specified + * free queue must be valid within the Navigator Subsystem and must be owned + * by the host, or a subordinate of the host, requesting allocation and + * configuration of the receive flow. + * + * @rx_ps_location: + * UDMAP receive flow PS words location configuration to be programmed into the + * rx_ps_location field of the flow's RFLOW_RFA register. + */ +struct ti_sci_msg_rm_udmap_flow_cfg_req { + struct ti_sci_msg_hdr hdr; + u32 valid_params; + u16 nav_id; + u16 flow_index; + u8 rx_einfo_present; + u8 rx_psinfo_present; + u8 rx_error_handling; + u8 rx_desc_type; + u16 rx_sop_offset; + u16 rx_dest_qnum; + u8 rx_src_tag_hi; + u8 rx_src_tag_lo; + u8 rx_dest_tag_hi; + u8 rx_dest_tag_lo; + u8 rx_src_tag_hi_sel; + u8 rx_src_tag_lo_sel; + u8 rx_dest_tag_hi_sel; + u8 rx_dest_tag_lo_sel; + u16 rx_fdq0_sz0_qnum; + u16 rx_fdq1_qnum; + u16 rx_fdq2_qnum; + u16 rx_fdq3_qnum; + u8 rx_ps_location; +} __packed; + +/** + * struct ti_sci_msg_req_proc_request - Request a processor + * @hdr: Generic Header + * @processor_id: ID of processor being requested + * + * Request type is TI_SCI_MSG_PROC_REQUEST, response is a generic ACK/NACK + * message. + */ +struct ti_sci_msg_req_proc_request { + struct ti_sci_msg_hdr hdr; + u8 processor_id; +} __packed; + +/** + * struct ti_sci_msg_req_proc_release - Release a processor + * @hdr: Generic Header + * @processor_id: ID of processor being released + * + * Request type is TI_SCI_MSG_PROC_RELEASE, response is a generic ACK/NACK + * message. + */ +struct ti_sci_msg_req_proc_release { + struct ti_sci_msg_hdr hdr; + u8 processor_id; +} __packed; + +/** + * struct ti_sci_msg_req_proc_handover - Handover a processor to a host + * @hdr: Generic Header + * @processor_id: ID of processor being handed over + * @host_id: Host ID the control needs to be transferred to + * + * Request type is TI_SCI_MSG_PROC_HANDOVER, response is a generic ACK/NACK + * message. + */ +struct ti_sci_msg_req_proc_handover { + struct ti_sci_msg_hdr hdr; + u8 processor_id; + u8 host_id; +} __packed; + +/* Boot Vector masks */ +#define TI_SCI_ADDR_LOW_MASK GENMASK_ULL(31, 0) +#define TI_SCI_ADDR_HIGH_MASK GENMASK_ULL(63, 32) +#define TI_SCI_ADDR_HIGH_SHIFT 32 + +/** + * struct ti_sci_msg_req_set_config - Set Processor boot configuration + * @hdr: Generic Header + * @processor_id: ID of processor being configured + * @bootvector_low: Lower 32 bit address (Little Endian) of boot vector + * @bootvector_high: Higher 32 bit address (Little Endian) of boot vector + * @config_flags_set: Optional Processor specific Config Flags to set. + * Setting a bit here implies the corresponding mode + * will be set + * @config_flags_clear: Optional Processor specific Config Flags to clear. + * Setting a bit here implies the corresponding mode + * will be cleared + * + * Request type is TI_SCI_MSG_PROC_HANDOVER, response is a generic ACK/NACK + * message. + */ +struct ti_sci_msg_req_set_config { + struct ti_sci_msg_hdr hdr; + u8 processor_id; + u32 bootvector_low; + u32 bootvector_high; + u32 config_flags_set; + u32 config_flags_clear; +} __packed; + +/** + * struct ti_sci_msg_req_set_ctrl - Set Processor boot control flags + * @hdr: Generic Header + * @processor_id: ID of processor being configured + * @control_flags_set: Optional Processor specific Control Flags to set. + * Setting a bit here implies the corresponding mode + * will be set + * @control_flags_clear:Optional Processor specific Control Flags to clear. + * Setting a bit here implies the corresponding mode + * will be cleared + * + * Request type is TI_SCI_MSG_SET_CTRL, response is a generic ACK/NACK + * message. + */ +struct ti_sci_msg_req_set_ctrl { + struct ti_sci_msg_hdr hdr; + u8 processor_id; + u32 control_flags_set; + u32 control_flags_clear; +} __packed; + +/** + * struct ti_sci_msg_req_get_status - Processor boot status request + * @hdr: Generic Header + * @processor_id: ID of processor whose status is being requested + * + * Request type is TI_SCI_MSG_GET_STATUS, response is an appropriate + * message, or NACK in case of inability to satisfy request. + */ +struct ti_sci_msg_req_get_status { + struct ti_sci_msg_hdr hdr; + u8 processor_id; +} __packed; + +/** + * struct ti_sci_msg_resp_get_status - Processor boot status response + * @hdr: Generic Header + * @processor_id: ID of processor whose status is returned + * @bootvector_low: Lower 32 bit address (Little Endian) of boot vector + * @bootvector_high: Higher 32 bit address (Little Endian) of boot vector + * @config_flags: Optional Processor specific Config Flags set currently + * @control_flags: Optional Processor specific Control Flags set currently + * @status_flags: Optional Processor specific Status Flags set currently + * + * Response structure to a TI_SCI_MSG_GET_STATUS request. + */ +struct ti_sci_msg_resp_get_status { + struct ti_sci_msg_hdr hdr; + u8 processor_id; + u32 bootvector_low; + u32 bootvector_high; + u32 config_flags; + u32 control_flags; + u32 status_flags; +} __packed; + +#endif /* __TI_SCI_H */ |