diff options
Diffstat (limited to 'drivers/fpga/dfl-n3000-nios.c')
| -rw-r--r-- | drivers/fpga/dfl-n3000-nios.c | 588 |
1 files changed, 588 insertions, 0 deletions
diff --git a/drivers/fpga/dfl-n3000-nios.c b/drivers/fpga/dfl-n3000-nios.c new file mode 100644 index 0000000000..9ddf1d1d39 --- /dev/null +++ b/drivers/fpga/dfl-n3000-nios.c @@ -0,0 +1,588 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * DFL device driver for Nios private feature on Intel PAC (Programmable + * Acceleration Card) N3000 + * + * Copyright (C) 2019-2020 Intel Corporation, Inc. + * + * Authors: + * Wu Hao <hao.wu@intel.com> + * Xu Yilun <yilun.xu@intel.com> + */ +#include <linux/bitfield.h> +#include <linux/dfl.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/io-64-nonatomic-lo-hi.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/stddef.h> +#include <linux/spi/altera.h> +#include <linux/spi/spi.h> +#include <linux/types.h> + +/* + * N3000 Nios private feature registers, named as NIOS_SPI_XX on spec. + * NS is the abbreviation of NIOS_SPI. + */ +#define N3000_NS_PARAM 0x8 +#define N3000_NS_PARAM_SHIFT_MODE_MSK BIT_ULL(1) +#define N3000_NS_PARAM_SHIFT_MODE_MSB 0 +#define N3000_NS_PARAM_SHIFT_MODE_LSB 1 +#define N3000_NS_PARAM_DATA_WIDTH GENMASK_ULL(7, 2) +#define N3000_NS_PARAM_NUM_CS GENMASK_ULL(13, 8) +#define N3000_NS_PARAM_CLK_POL BIT_ULL(14) +#define N3000_NS_PARAM_CLK_PHASE BIT_ULL(15) +#define N3000_NS_PARAM_PERIPHERAL_ID GENMASK_ULL(47, 32) + +#define N3000_NS_CTRL 0x10 +#define N3000_NS_CTRL_WR_DATA GENMASK_ULL(31, 0) +#define N3000_NS_CTRL_ADDR GENMASK_ULL(44, 32) +#define N3000_NS_CTRL_CMD_MSK GENMASK_ULL(63, 62) +#define N3000_NS_CTRL_CMD_NOP 0 +#define N3000_NS_CTRL_CMD_RD 1 +#define N3000_NS_CTRL_CMD_WR 2 + +#define N3000_NS_STAT 0x18 +#define N3000_NS_STAT_RD_DATA GENMASK_ULL(31, 0) +#define N3000_NS_STAT_RW_VAL BIT_ULL(32) + +/* Nios handshake registers, indirect access */ +#define N3000_NIOS_INIT 0x1000 +#define N3000_NIOS_INIT_DONE BIT(0) +#define N3000_NIOS_INIT_START BIT(1) +/* Mode for retimer A, link 0, the same below */ +#define N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK GENMASK(9, 8) +#define N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK GENMASK(11, 10) +#define N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK GENMASK(13, 12) +#define N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK GENMASK(15, 14) +#define N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK GENMASK(17, 16) +#define N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK GENMASK(19, 18) +#define N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK GENMASK(21, 20) +#define N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK GENMASK(23, 22) +#define N3000_NIOS_INIT_REQ_FEC_MODE_NO 0x0 +#define N3000_NIOS_INIT_REQ_FEC_MODE_KR 0x1 +#define N3000_NIOS_INIT_REQ_FEC_MODE_RS 0x2 + +#define N3000_NIOS_FW_VERSION 0x1004 +#define N3000_NIOS_FW_VERSION_PATCH GENMASK(23, 20) +#define N3000_NIOS_FW_VERSION_MINOR GENMASK(27, 24) +#define N3000_NIOS_FW_VERSION_MAJOR GENMASK(31, 28) + +/* The retimers we use on Intel PAC N3000 is Parkvale, abbreviated to PKVL */ +#define N3000_NIOS_PKVL_A_MODE_STS 0x1020 +#define N3000_NIOS_PKVL_B_MODE_STS 0x1024 +#define N3000_NIOS_PKVL_MODE_STS_GROUP_MSK GENMASK(15, 8) +#define N3000_NIOS_PKVL_MODE_STS_GROUP_OK 0x0 +#define N3000_NIOS_PKVL_MODE_STS_ID_MSK GENMASK(7, 0) +/* When GROUP MASK field == GROUP_OK */ +#define N3000_NIOS_PKVL_MODE_ID_RESET 0x0 +#define N3000_NIOS_PKVL_MODE_ID_4X10G 0x1 +#define N3000_NIOS_PKVL_MODE_ID_4X25G 0x2 +#define N3000_NIOS_PKVL_MODE_ID_2X25G 0x3 +#define N3000_NIOS_PKVL_MODE_ID_2X25G_2X10G 0x4 +#define N3000_NIOS_PKVL_MODE_ID_1X25G 0x5 + +#define N3000_NIOS_REGBUS_RETRY_COUNT 10000 /* loop count */ + +#define N3000_NIOS_INIT_TIMEOUT 10000000 /* usec */ +#define N3000_NIOS_INIT_TIME_INTV 100000 /* usec */ + +#define N3000_NIOS_INIT_REQ_FEC_MODE_MSK_ALL \ + (N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK | \ + N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK | \ + N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK | \ + N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK | \ + N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK | \ + N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK | \ + N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK | \ + N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK) + +#define N3000_NIOS_INIT_REQ_FEC_MODE_NO_ALL \ + (FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_NO)) + +#define N3000_NIOS_INIT_REQ_FEC_MODE_KR_ALL \ + (FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_KR)) + +#define N3000_NIOS_INIT_REQ_FEC_MODE_RS_ALL \ + (FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_RS)) + +struct n3000_nios { + void __iomem *base; + struct regmap *regmap; + struct device *dev; + struct platform_device *altera_spi; +}; + +static ssize_t nios_fw_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct n3000_nios *nn = dev_get_drvdata(dev); + unsigned int val; + int ret; + + ret = regmap_read(nn->regmap, N3000_NIOS_FW_VERSION, &val); + if (ret) + return ret; + + return sysfs_emit(buf, "%x.%x.%x\n", + (u8)FIELD_GET(N3000_NIOS_FW_VERSION_MAJOR, val), + (u8)FIELD_GET(N3000_NIOS_FW_VERSION_MINOR, val), + (u8)FIELD_GET(N3000_NIOS_FW_VERSION_PATCH, val)); +} +static DEVICE_ATTR_RO(nios_fw_version); + +#define IS_MODE_STATUS_OK(mode_stat) \ + (FIELD_GET(N3000_NIOS_PKVL_MODE_STS_GROUP_MSK, (mode_stat)) == \ + N3000_NIOS_PKVL_MODE_STS_GROUP_OK) + +#define IS_RETIMER_FEC_SUPPORTED(retimer_mode) \ + ((retimer_mode) != N3000_NIOS_PKVL_MODE_ID_RESET && \ + (retimer_mode) != N3000_NIOS_PKVL_MODE_ID_4X10G) + +static int get_retimer_mode(struct n3000_nios *nn, unsigned int mode_stat_reg, + unsigned int *retimer_mode) +{ + unsigned int val; + int ret; + + ret = regmap_read(nn->regmap, mode_stat_reg, &val); + if (ret) + return ret; + + if (!IS_MODE_STATUS_OK(val)) + return -EFAULT; + + *retimer_mode = FIELD_GET(N3000_NIOS_PKVL_MODE_STS_ID_MSK, val); + + return 0; +} + +static ssize_t retimer_A_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct n3000_nios *nn = dev_get_drvdata(dev); + unsigned int mode; + int ret; + + ret = get_retimer_mode(nn, N3000_NIOS_PKVL_A_MODE_STS, &mode); + if (ret) + return ret; + + return sysfs_emit(buf, "0x%x\n", mode); +} +static DEVICE_ATTR_RO(retimer_A_mode); + +static ssize_t retimer_B_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct n3000_nios *nn = dev_get_drvdata(dev); + unsigned int mode; + int ret; + + ret = get_retimer_mode(nn, N3000_NIOS_PKVL_B_MODE_STS, &mode); + if (ret) + return ret; + + return sysfs_emit(buf, "0x%x\n", mode); +} +static DEVICE_ATTR_RO(retimer_B_mode); + +static ssize_t fec_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + unsigned int val, retimer_a_mode, retimer_b_mode, fec_modes; + struct n3000_nios *nn = dev_get_drvdata(dev); + int ret; + + /* FEC mode setting is not supported in early FW versions */ + ret = regmap_read(nn->regmap, N3000_NIOS_FW_VERSION, &val); + if (ret) + return ret; + + if (FIELD_GET(N3000_NIOS_FW_VERSION_MAJOR, val) < 3) + return sysfs_emit(buf, "not supported\n"); + + /* If no 25G links, FEC mode setting is not supported either */ + ret = get_retimer_mode(nn, N3000_NIOS_PKVL_A_MODE_STS, &retimer_a_mode); + if (ret) + return ret; + + ret = get_retimer_mode(nn, N3000_NIOS_PKVL_B_MODE_STS, &retimer_b_mode); + if (ret) + return ret; + + if (!IS_RETIMER_FEC_SUPPORTED(retimer_a_mode) && + !IS_RETIMER_FEC_SUPPORTED(retimer_b_mode)) + return sysfs_emit(buf, "not supported\n"); + + /* get the valid FEC mode for 25G links */ + ret = regmap_read(nn->regmap, N3000_NIOS_INIT, &val); + if (ret) + return ret; + + /* + * FEC mode should always be the same for all links, as we set them + * in this way. + */ + fec_modes = (val & N3000_NIOS_INIT_REQ_FEC_MODE_MSK_ALL); + if (fec_modes == N3000_NIOS_INIT_REQ_FEC_MODE_NO_ALL) + return sysfs_emit(buf, "no\n"); + else if (fec_modes == N3000_NIOS_INIT_REQ_FEC_MODE_KR_ALL) + return sysfs_emit(buf, "kr\n"); + else if (fec_modes == N3000_NIOS_INIT_REQ_FEC_MODE_RS_ALL) + return sysfs_emit(buf, "rs\n"); + + return -EFAULT; +} +static DEVICE_ATTR_RO(fec_mode); + +static struct attribute *n3000_nios_attrs[] = { + &dev_attr_nios_fw_version.attr, + &dev_attr_retimer_A_mode.attr, + &dev_attr_retimer_B_mode.attr, + &dev_attr_fec_mode.attr, + NULL, +}; +ATTRIBUTE_GROUPS(n3000_nios); + +static int n3000_nios_init_done_check(struct n3000_nios *nn) +{ + unsigned int val, state_a, state_b; + struct device *dev = nn->dev; + int ret, ret2; + + /* + * The SPI is shared by the Nios core inside the FPGA, Nios will use + * this SPI master to do some one time initialization after power up, + * and then release the control to OS. The driver needs to poll on + * INIT_DONE to see when driver could take the control. + * + * Please note that after Nios firmware version 3.0.0, INIT_START is + * introduced, so driver needs to trigger START firstly and then check + * INIT_DONE. + */ + + ret = regmap_read(nn->regmap, N3000_NIOS_FW_VERSION, &val); + if (ret) + return ret; + + /* + * If Nios version register is totally uninitialized(== 0x0), then the + * Nios firmware is missing. So host could take control of SPI master + * safely, but initialization work for Nios is not done. To restore the + * card, we need to reprogram a new Nios firmware via the BMC chip on + * SPI bus. So the driver doesn't error out, it continues to create the + * spi controller device and spi_board_info for BMC. + */ + if (val == 0) { + dev_err(dev, "Nios version reg = 0x%x, skip INIT_DONE check, but the retimer may be uninitialized\n", + val); + return 0; + } + + if (FIELD_GET(N3000_NIOS_FW_VERSION_MAJOR, val) >= 3) { + /* read NIOS_INIT to check if retimer initialization is done */ + ret = regmap_read(nn->regmap, N3000_NIOS_INIT, &val); + if (ret) + return ret; + + /* check if retimers are initialized already */ + if (val & (N3000_NIOS_INIT_DONE | N3000_NIOS_INIT_START)) + goto nios_init_done; + + /* configure FEC mode per module param */ + val = N3000_NIOS_INIT_START; + + /* + * When the retimer is to be set to 10G mode, there is no FEC + * mode setting, so the REQ_FEC_MODE field will be ignored by + * Nios firmware in this case. But we should still fill the FEC + * mode field cause host could not get the retimer working mode + * until the Nios init is done. + * + * For now the driver doesn't support the retimer FEC mode + * switching per user's request. It is always set to Reed + * Solomon FEC. + * + * The driver will set the same FEC mode for all links. + */ + val |= N3000_NIOS_INIT_REQ_FEC_MODE_RS_ALL; + + ret = regmap_write(nn->regmap, N3000_NIOS_INIT, val); + if (ret) + return ret; + } + +nios_init_done: + /* polls on NIOS_INIT_DONE */ + ret = regmap_read_poll_timeout(nn->regmap, N3000_NIOS_INIT, val, + val & N3000_NIOS_INIT_DONE, + N3000_NIOS_INIT_TIME_INTV, + N3000_NIOS_INIT_TIMEOUT); + if (ret) + dev_err(dev, "NIOS_INIT_DONE %s\n", + (ret == -ETIMEDOUT) ? "timed out" : "check error"); + + ret2 = regmap_read(nn->regmap, N3000_NIOS_PKVL_A_MODE_STS, &state_a); + if (ret2) + return ret2; + + ret2 = regmap_read(nn->regmap, N3000_NIOS_PKVL_B_MODE_STS, &state_b); + if (ret2) + return ret2; + + if (!ret) { + /* + * After INIT_DONE is detected, it still needs to check if the + * Nios firmware reports any error during the retimer + * configuration. + */ + if (IS_MODE_STATUS_OK(state_a) && IS_MODE_STATUS_OK(state_b)) + return 0; + + /* + * If the retimer configuration is failed, the Nios firmware + * will still release the spi controller for host to + * communicate with the BMC. It makes possible for people to + * reprogram a new Nios firmware and restore the card. So the + * driver doesn't error out, it continues to create the spi + * controller device and spi_board_info for BMC. + */ + dev_err(dev, "NIOS_INIT_DONE OK, but err on retimer init\n"); + } + + dev_err(nn->dev, "PKVL_A_MODE_STS 0x%x\n", state_a); + dev_err(nn->dev, "PKVL_B_MODE_STS 0x%x\n", state_b); + + return ret; +} + +static struct spi_board_info m10_n3000_info = { + .modalias = "m10-n3000", + .max_speed_hz = 12500000, + .bus_num = 0, + .chip_select = 0, +}; + +static int create_altera_spi_controller(struct n3000_nios *nn) +{ + struct altera_spi_platform_data pdata = { 0 }; + struct platform_device_info pdevinfo = { 0 }; + void __iomem *base = nn->base; + u64 v; + + v = readq(base + N3000_NS_PARAM); + + pdata.mode_bits = SPI_CS_HIGH; + if (FIELD_GET(N3000_NS_PARAM_CLK_POL, v)) + pdata.mode_bits |= SPI_CPOL; + if (FIELD_GET(N3000_NS_PARAM_CLK_PHASE, v)) + pdata.mode_bits |= SPI_CPHA; + + pdata.num_chipselect = FIELD_GET(N3000_NS_PARAM_NUM_CS, v); + pdata.bits_per_word_mask = + SPI_BPW_RANGE_MASK(1, FIELD_GET(N3000_NS_PARAM_DATA_WIDTH, v)); + + pdata.num_devices = 1; + pdata.devices = &m10_n3000_info; + + dev_dbg(nn->dev, "%s cs %u bpm 0x%x mode 0x%x\n", __func__, + pdata.num_chipselect, pdata.bits_per_word_mask, + pdata.mode_bits); + + pdevinfo.name = "subdev_spi_altera"; + pdevinfo.id = PLATFORM_DEVID_AUTO; + pdevinfo.parent = nn->dev; + pdevinfo.data = &pdata; + pdevinfo.size_data = sizeof(pdata); + + nn->altera_spi = platform_device_register_full(&pdevinfo); + return PTR_ERR_OR_ZERO(nn->altera_spi); +} + +static void destroy_altera_spi_controller(struct n3000_nios *nn) +{ + platform_device_unregister(nn->altera_spi); +} + +static int n3000_nios_poll_stat_timeout(void __iomem *base, u64 *v) +{ + int loops; + + /* + * We don't use the time based timeout here for performance. + * + * The regbus read/write is on the critical path of Intel PAC N3000 + * image programming. The time based timeout checking will add too much + * overhead on it. Usually the state changes in 1 or 2 loops on the + * test server, and we set 10000 times loop here for safety. + */ + for (loops = N3000_NIOS_REGBUS_RETRY_COUNT; loops > 0 ; loops--) { + *v = readq(base + N3000_NS_STAT); + if (*v & N3000_NS_STAT_RW_VAL) + break; + cpu_relax(); + } + + return (loops > 0) ? 0 : -ETIMEDOUT; +} + +static int n3000_nios_reg_write(void *context, unsigned int reg, unsigned int val) +{ + struct n3000_nios *nn = context; + u64 v; + int ret; + + v = FIELD_PREP(N3000_NS_CTRL_CMD_MSK, N3000_NS_CTRL_CMD_WR) | + FIELD_PREP(N3000_NS_CTRL_ADDR, reg) | + FIELD_PREP(N3000_NS_CTRL_WR_DATA, val); + writeq(v, nn->base + N3000_NS_CTRL); + + ret = n3000_nios_poll_stat_timeout(nn->base, &v); + if (ret) + dev_err(nn->dev, "fail to write reg 0x%x val 0x%x: %d\n", + reg, val, ret); + + return ret; +} + +static int n3000_nios_reg_read(void *context, unsigned int reg, unsigned int *val) +{ + struct n3000_nios *nn = context; + u64 v; + int ret; + + v = FIELD_PREP(N3000_NS_CTRL_CMD_MSK, N3000_NS_CTRL_CMD_RD) | + FIELD_PREP(N3000_NS_CTRL_ADDR, reg); + writeq(v, nn->base + N3000_NS_CTRL); + + ret = n3000_nios_poll_stat_timeout(nn->base, &v); + if (ret) + dev_err(nn->dev, "fail to read reg 0x%x: %d\n", reg, ret); + else + *val = FIELD_GET(N3000_NS_STAT_RD_DATA, v); + + return ret; +} + +static const struct regmap_config n3000_nios_regbus_cfg = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .fast_io = true, + + .reg_write = n3000_nios_reg_write, + .reg_read = n3000_nios_reg_read, +}; + +static int n3000_nios_probe(struct dfl_device *ddev) +{ + struct device *dev = &ddev->dev; + struct n3000_nios *nn; + int ret; + + nn = devm_kzalloc(dev, sizeof(*nn), GFP_KERNEL); + if (!nn) + return -ENOMEM; + + dev_set_drvdata(&ddev->dev, nn); + + nn->dev = dev; + + nn->base = devm_ioremap_resource(&ddev->dev, &ddev->mmio_res); + if (IS_ERR(nn->base)) + return PTR_ERR(nn->base); + + nn->regmap = devm_regmap_init(dev, NULL, nn, &n3000_nios_regbus_cfg); + if (IS_ERR(nn->regmap)) + return PTR_ERR(nn->regmap); + + ret = n3000_nios_init_done_check(nn); + if (ret) + return ret; + + ret = create_altera_spi_controller(nn); + if (ret) + dev_err(dev, "altera spi controller create failed: %d\n", ret); + + return ret; +} + +static void n3000_nios_remove(struct dfl_device *ddev) +{ + struct n3000_nios *nn = dev_get_drvdata(&ddev->dev); + + destroy_altera_spi_controller(nn); +} + +#define FME_FEATURE_ID_N3000_NIOS 0xd + +static const struct dfl_device_id n3000_nios_ids[] = { + { FME_ID, FME_FEATURE_ID_N3000_NIOS }, + { } +}; +MODULE_DEVICE_TABLE(dfl, n3000_nios_ids); + +static struct dfl_driver n3000_nios_driver = { + .drv = { + .name = "dfl-n3000-nios", + .dev_groups = n3000_nios_groups, + }, + .id_table = n3000_nios_ids, + .probe = n3000_nios_probe, + .remove = n3000_nios_remove, +}; + +module_dfl_driver(n3000_nios_driver); + +MODULE_DESCRIPTION("Driver for Nios private feature on Intel PAC N3000"); +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL v2"); |