summaryrefslogtreecommitdiffstats
path: root/drivers/fsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/fsi')
-rw-r--r--drivers/fsi/Kconfig105
-rw-r--r--drivers/fsi/Makefile12
-rw-r--r--drivers/fsi/cf-fsi-fw.h157
-rw-r--r--drivers/fsi/fsi-core.c1448
-rw-r--r--drivers/fsi/fsi-master-aspeed.c675
-rw-r--r--drivers/fsi/fsi-master-ast-cf.c1444
-rw-r--r--drivers/fsi/fsi-master-gpio.c897
-rw-r--r--drivers/fsi/fsi-master-hub.c298
-rw-r--r--drivers/fsi/fsi-master-i2cr.c316
-rw-r--r--drivers/fsi/fsi-master-i2cr.h33
-rw-r--r--drivers/fsi/fsi-master.h161
-rw-r--r--drivers/fsi/fsi-occ.c766
-rw-r--r--drivers/fsi/fsi-sbefifo.c1159
-rw-r--r--drivers/fsi/fsi-scom.c628
-rw-r--r--drivers/fsi/fsi-slave.h28
-rw-r--r--drivers/fsi/i2cr-scom.c154
16 files changed, 8281 insertions, 0 deletions
diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
new file mode 100644
index 000000000..79a315936
--- /dev/null
+++ b/drivers/fsi/Kconfig
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# FSI subsystem
+#
+
+menuconfig FSI
+ tristate "FSI support"
+ depends on OF
+ select CRC4
+ help
+ FSI - the FRU Support Interface - is a simple bus for low-level
+ access to POWER-based hardware.
+
+if FSI
+
+config FSI_NEW_DEV_NODE
+ bool "Create '/dev/fsi' directory for char devices"
+ default n
+ help
+ This option causes char devices created for FSI devices to be
+ located under a common /dev/fsi/ directory. Set to N unless your
+ userspace has been updated to handle the new location.
+
+ Additionally, it also causes the char device names to be offset
+ by one so that chip 0 will have /dev/scom1 and chip1 /dev/scom2
+ to match old userspace expectations.
+
+ New userspace will use udev rules to generate predictable access
+ symlinks in /dev/fsi/by-path when this option is enabled.
+
+config FSI_MASTER_GPIO
+ tristate "GPIO-based FSI master"
+ depends on GPIOLIB
+ select CRC4
+ help
+ This option enables a FSI master driver using GPIO lines.
+
+config FSI_MASTER_HUB
+ tristate "FSI hub master"
+ help
+ This option enables a FSI hub master driver. Hub is a type of FSI
+ master that is connected to the upstream master via a slave. Hubs
+ allow chaining of FSI links to an arbitrary depth. This allows for
+ a high target device fanout.
+
+config FSI_MASTER_AST_CF
+ tristate "FSI master based on Aspeed ColdFire coprocessor"
+ depends on GPIOLIB
+ depends on GPIO_ASPEED
+ select GENERIC_ALLOCATOR
+ help
+ This option enables a FSI master using the AST2400 and AST2500 GPIO
+ lines driven by the internal ColdFire coprocessor. This requires
+ the corresponding machine specific ColdFire firmware to be available.
+
+config FSI_MASTER_ASPEED
+ tristate "FSI ASPEED master"
+ depends on HAS_IOMEM
+ help
+ This option enables a FSI master that is present behind an OPB bridge
+ in the AST2600.
+
+ Enable it for your BMC kernel in an OpenPower or IBM Power system.
+
+config FSI_MASTER_I2CR
+ tristate "IBM I2C Responder virtual FSI master"
+ depends on I2C
+ help
+ This option enables a virtual FSI master in order to access a CFAM
+ behind an IBM I2C Responder (I2CR) chip. The I2CR is an I2C device
+ that translates I2C commands to CFAM or SCOM operations, effectively
+ implementing an FSI master and bus.
+
+config FSI_SCOM
+ tristate "SCOM FSI client device driver"
+ help
+ This option enables an FSI based SCOM device driver.
+
+config FSI_SBEFIFO
+ tristate "SBEFIFO FSI client device driver"
+ depends on OF_ADDRESS
+ help
+ This option enables an FSI based SBEFIFO device driver. The SBEFIFO is
+ a pipe-like FSI device for communicating with the self boot engine
+ (SBE) on POWER processors.
+
+config FSI_OCC
+ tristate "OCC SBEFIFO client device driver"
+ depends on FSI_SBEFIFO
+ help
+ This option enables an SBEFIFO based On-Chip Controller (OCC) device
+ driver. The OCC is a device embedded on a POWER processor that collects
+ and aggregates sensor data from the processor and system. The OCC can
+ provide the raw sensor data as well as perform thermal and power
+ management on the system.
+
+config I2CR_SCOM
+ tristate "IBM I2C Responder SCOM driver"
+ depends on FSI_MASTER_I2CR
+ help
+ This option enables an I2C Responder based SCOM device driver. The
+ I2CR has the capability to directly perform SCOM operations instead
+ of using the FSI2PIB engine.
+
+endif
diff --git a/drivers/fsi/Makefile b/drivers/fsi/Makefile
new file mode 100644
index 000000000..5550aa15e
--- /dev/null
+++ b/drivers/fsi/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_FSI) += fsi-core.o
+obj-$(CONFIG_FSI_MASTER_HUB) += fsi-master-hub.o
+obj-$(CONFIG_FSI_MASTER_ASPEED) += fsi-master-aspeed.o
+obj-$(CONFIG_FSI_MASTER_GPIO) += fsi-master-gpio.o
+obj-$(CONFIG_FSI_MASTER_I2CR) += fsi-master-i2cr.o
+obj-$(CONFIG_FSI_MASTER_AST_CF) += fsi-master-ast-cf.o
+obj-$(CONFIG_FSI_SCOM) += fsi-scom.o
+obj-$(CONFIG_FSI_SBEFIFO) += fsi-sbefifo.o
+obj-$(CONFIG_FSI_OCC) += fsi-occ.o
+obj-$(CONFIG_I2CR_SCOM) += i2cr-scom.o
diff --git a/drivers/fsi/cf-fsi-fw.h b/drivers/fsi/cf-fsi-fw.h
new file mode 100644
index 000000000..1118eaf7e
--- /dev/null
+++ b/drivers/fsi/cf-fsi-fw.h
@@ -0,0 +1,157 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+#ifndef __CF_FSI_FW_H
+#define __CF_FSI_FW_H
+
+/*
+ * uCode file layout
+ *
+ * 0000...03ff : m68k exception vectors
+ * 0400...04ff : Header info & boot config block
+ * 0500....... : Code & stack
+ */
+
+/*
+ * Header info & boot config area
+ *
+ * The Header info is built into the ucode and provide version and
+ * platform information.
+ *
+ * the Boot config needs to be adjusted by the ARM prior to starting
+ * the ucode if the Command/Status area isn't at 0x320000 in CF space
+ * (ie. beginning of SRAM).
+ */
+
+#define HDR_OFFSET 0x400
+
+/* Info: Signature & version */
+#define HDR_SYS_SIG 0x00 /* 2 bytes system signature */
+#define SYS_SIG_SHARED 0x5348
+#define SYS_SIG_SPLIT 0x5350
+#define HDR_FW_VERS 0x02 /* 2 bytes Major.Minor */
+#define HDR_API_VERS 0x04 /* 2 bytes Major.Minor */
+#define API_VERSION_MAJ 2 /* Current version */
+#define API_VERSION_MIN 1
+#define HDR_FW_OPTIONS 0x08 /* 4 bytes option flags */
+#define FW_OPTION_TRACE_EN 0x00000001 /* FW tracing enabled */
+#define FW_OPTION_CONT_CLOCK 0x00000002 /* Continuous clocking supported */
+#define HDR_FW_SIZE 0x10 /* 4 bytes size for combo image */
+
+/* Boot Config: Address of Command/Status area */
+#define HDR_CMD_STAT_AREA 0x80 /* 4 bytes CF address */
+#define HDR_FW_CONTROL 0x84 /* 4 bytes control flags */
+#define FW_CONTROL_CONT_CLOCK 0x00000002 /* Continuous clocking enabled */
+#define FW_CONTROL_DUMMY_RD 0x00000004 /* Extra dummy read (AST2400) */
+#define FW_CONTROL_USE_STOP 0x00000008 /* Use STOP instructions */
+#define HDR_CLOCK_GPIO_VADDR 0x90 /* 2 bytes offset from GPIO base */
+#define HDR_CLOCK_GPIO_DADDR 0x92 /* 2 bytes offset from GPIO base */
+#define HDR_DATA_GPIO_VADDR 0x94 /* 2 bytes offset from GPIO base */
+#define HDR_DATA_GPIO_DADDR 0x96 /* 2 bytes offset from GPIO base */
+#define HDR_TRANS_GPIO_VADDR 0x98 /* 2 bytes offset from GPIO base */
+#define HDR_TRANS_GPIO_DADDR 0x9a /* 2 bytes offset from GPIO base */
+#define HDR_CLOCK_GPIO_BIT 0x9c /* 1 byte bit number */
+#define HDR_DATA_GPIO_BIT 0x9d /* 1 byte bit number */
+#define HDR_TRANS_GPIO_BIT 0x9e /* 1 byte bit number */
+
+/*
+ * Command/Status area layout: Main part
+ */
+
+/* Command/Status register:
+ *
+ * +---------------------------+
+ * | STAT | RLEN | CLEN | CMD |
+ * | 8 | 8 | 8 | 8 |
+ * +---------------------------+
+ * | | | |
+ * status | | |
+ * Response len | |
+ * (in bits) | |
+ * | |
+ * Command len |
+ * (in bits) |
+ * |
+ * Command code
+ *
+ * Due to the big endian layout, that means that a byte read will
+ * return the status byte
+ */
+#define CMD_STAT_REG 0x00
+#define CMD_REG_CMD_MASK 0x000000ff
+#define CMD_REG_CMD_SHIFT 0
+#define CMD_NONE 0x00
+#define CMD_COMMAND 0x01
+#define CMD_BREAK 0x02
+#define CMD_IDLE_CLOCKS 0x03 /* clen = #clocks */
+#define CMD_INVALID 0xff
+#define CMD_REG_CLEN_MASK 0x0000ff00
+#define CMD_REG_CLEN_SHIFT 8
+#define CMD_REG_RLEN_MASK 0x00ff0000
+#define CMD_REG_RLEN_SHIFT 16
+#define CMD_REG_STAT_MASK 0xff000000
+#define CMD_REG_STAT_SHIFT 24
+#define STAT_WORKING 0x00
+#define STAT_COMPLETE 0x01
+#define STAT_ERR_INVAL_CMD 0x80
+#define STAT_ERR_INVAL_IRQ 0x81
+#define STAT_ERR_MTOE 0x82
+
+/* Response tag & CRC */
+#define STAT_RTAG 0x04
+
+/* Response CRC */
+#define STAT_RCRC 0x05
+
+/* Echo and Send delay */
+#define ECHO_DLY_REG 0x08
+#define SEND_DLY_REG 0x09
+
+/* Command data area
+ *
+ * Last byte of message must be left aligned
+ */
+#define CMD_DATA 0x10 /* 64 bit of data */
+
+/* Response data area, right aligned, unused top bits are 1 */
+#define RSP_DATA 0x20 /* 32 bit of data */
+
+/* Misc */
+#define INT_CNT 0x30 /* 32-bit interrupt count */
+#define BAD_INT_VEC 0x34 /* 32-bit bad interrupt vector # */
+#define CF_STARTED 0x38 /* byte, set to -1 when copro started */
+#define CLK_CNT 0x3c /* 32-bit, clock count (debug only) */
+
+/*
+ * SRAM layout: GPIO arbitration part
+ */
+#define ARB_REG 0x40
+#define ARB_ARM_REQ 0x01
+#define ARB_ARM_ACK 0x02
+
+/* Misc2 */
+#define CF_RESET_D0 0x50
+#define CF_RESET_D1 0x54
+#define BAD_INT_S0 0x58
+#define BAD_INT_S1 0x5c
+#define STOP_CNT 0x60
+
+/* Internal */
+
+/*
+ * SRAM layout: Trace buffer (debug builds only)
+ */
+#define TRACEBUF 0x100
+#define TR_CLKOBIT0 0xc0
+#define TR_CLKOBIT1 0xc1
+#define TR_CLKOSTART 0x82
+#define TR_OLEN 0x83 /* + len */
+#define TR_CLKZ 0x84 /* + count */
+#define TR_CLKWSTART 0x85
+#define TR_CLKTAG 0x86 /* + tag */
+#define TR_CLKDATA 0x87 /* + len */
+#define TR_CLKCRC 0x88 /* + raw crc */
+#define TR_CLKIBIT0 0x90
+#define TR_CLKIBIT1 0x91
+#define TR_END 0xff
+
+#endif /* __CF_FSI_FW_H */
+
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
new file mode 100644
index 000000000..097d5a780
--- /dev/null
+++ b/drivers/fsi/fsi-core.c
@@ -0,0 +1,1448 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * FSI core driver
+ *
+ * Copyright (C) IBM Corporation 2016
+ *
+ * TODO:
+ * - Rework topology
+ * - s/chip_id/chip_loc
+ * - s/cfam/chip (cfam_id -> chip_id etc...)
+ */
+
+#include <linux/crc4.h>
+#include <linux/device.h>
+#include <linux/fsi.h>
+#include <linux/idr.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/cdev.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+
+#include "fsi-master.h"
+#include "fsi-slave.h"
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/fsi.h>
+
+#define FSI_SLAVE_CONF_NEXT_MASK GENMASK(31, 31)
+#define FSI_SLAVE_CONF_SLOTS_MASK GENMASK(23, 16)
+#define FSI_SLAVE_CONF_SLOTS_SHIFT 16
+#define FSI_SLAVE_CONF_VERSION_MASK GENMASK(15, 12)
+#define FSI_SLAVE_CONF_VERSION_SHIFT 12
+#define FSI_SLAVE_CONF_TYPE_MASK GENMASK(11, 4)
+#define FSI_SLAVE_CONF_TYPE_SHIFT 4
+#define FSI_SLAVE_CONF_CRC_SHIFT 4
+#define FSI_SLAVE_CONF_CRC_MASK GENMASK(3, 0)
+#define FSI_SLAVE_CONF_DATA_BITS 28
+
+#define FSI_PEEK_BASE 0x410
+
+static const int engine_page_size = 0x400;
+
+#define FSI_SLAVE_BASE 0x800
+
+/*
+ * FSI slave engine control register offsets
+ */
+#define FSI_SMODE 0x0 /* R/W: Mode register */
+#define FSI_SISC 0x8 /* R/W: Interrupt condition */
+#define FSI_SSTAT 0x14 /* R : Slave status */
+#define FSI_SLBUS 0x30 /* W : LBUS Ownership */
+#define FSI_LLMODE 0x100 /* R/W: Link layer mode register */
+
+/*
+ * SMODE fields
+ */
+#define FSI_SMODE_WSC 0x80000000 /* Warm start done */
+#define FSI_SMODE_ECRC 0x20000000 /* Hw CRC check */
+#define FSI_SMODE_SID_SHIFT 24 /* ID shift */
+#define FSI_SMODE_SID_MASK 3 /* ID Mask */
+#define FSI_SMODE_ED_SHIFT 20 /* Echo delay shift */
+#define FSI_SMODE_ED_MASK 0xf /* Echo delay mask */
+#define FSI_SMODE_SD_SHIFT 16 /* Send delay shift */
+#define FSI_SMODE_SD_MASK 0xf /* Send delay mask */
+#define FSI_SMODE_LBCRR_SHIFT 8 /* Clk ratio shift */
+#define FSI_SMODE_LBCRR_MASK 0xf /* Clk ratio mask */
+
+/*
+ * SLBUS fields
+ */
+#define FSI_SLBUS_FORCE 0x80000000 /* Force LBUS ownership */
+
+/*
+ * LLMODE fields
+ */
+#define FSI_LLMODE_ASYNC 0x1
+
+#define FSI_SLAVE_SIZE_23b 0x800000
+
+static DEFINE_IDA(master_ida);
+
+static const int slave_retries = 2;
+static int discard_errors;
+
+static dev_t fsi_base_dev;
+static DEFINE_IDA(fsi_minor_ida);
+#define FSI_CHAR_MAX_DEVICES 0x1000
+
+/* Legacy /dev numbering: 4 devices per chip, 16 chips */
+#define FSI_CHAR_LEGACY_TOP 64
+
+static int fsi_master_read(struct fsi_master *master, int link,
+ uint8_t slave_id, uint32_t addr, void *val, size_t size);
+static int fsi_master_write(struct fsi_master *master, int link,
+ uint8_t slave_id, uint32_t addr, const void *val, size_t size);
+static int fsi_master_break(struct fsi_master *master, int link);
+
+/*
+ * fsi_device_read() / fsi_device_write() / fsi_device_peek()
+ *
+ * FSI endpoint-device support
+ *
+ * Read / write / peek accessors for a client
+ *
+ * Parameters:
+ * dev: Structure passed to FSI client device drivers on probe().
+ * addr: FSI address of given device. Client should pass in its base address
+ * plus desired offset to access its register space.
+ * val: For read/peek this is the value read at the specified address. For
+ * write this is value to write to the specified address.
+ * The data in val must be FSI bus endian (big endian).
+ * size: Size in bytes of the operation. Sizes supported are 1, 2 and 4 bytes.
+ * Addresses must be aligned on size boundaries or an error will result.
+ */
+int fsi_device_read(struct fsi_device *dev, uint32_t addr, void *val,
+ size_t size)
+{
+ if (addr > dev->size || size > dev->size || addr > dev->size - size)
+ return -EINVAL;
+
+ return fsi_slave_read(dev->slave, dev->addr + addr, val, size);
+}
+EXPORT_SYMBOL_GPL(fsi_device_read);
+
+int fsi_device_write(struct fsi_device *dev, uint32_t addr, const void *val,
+ size_t size)
+{
+ if (addr > dev->size || size > dev->size || addr > dev->size - size)
+ return -EINVAL;
+
+ return fsi_slave_write(dev->slave, dev->addr + addr, val, size);
+}
+EXPORT_SYMBOL_GPL(fsi_device_write);
+
+int fsi_device_peek(struct fsi_device *dev, void *val)
+{
+ uint32_t addr = FSI_PEEK_BASE + ((dev->unit - 2) * sizeof(uint32_t));
+
+ return fsi_slave_read(dev->slave, addr, val, sizeof(uint32_t));
+}
+
+static void fsi_device_release(struct device *_device)
+{
+ struct fsi_device *device = to_fsi_dev(_device);
+
+ of_node_put(device->dev.of_node);
+ kfree(device);
+}
+
+static struct fsi_device *fsi_create_device(struct fsi_slave *slave)
+{
+ struct fsi_device *dev;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ dev->dev.parent = &slave->dev;
+ dev->dev.bus = &fsi_bus_type;
+ dev->dev.release = fsi_device_release;
+
+ return dev;
+}
+
+/* FSI slave support */
+static int fsi_slave_calc_addr(struct fsi_slave *slave, uint32_t *addrp,
+ uint8_t *idp)
+{
+ uint32_t addr = *addrp;
+ uint8_t id = *idp;
+
+ if (addr > slave->size)
+ return -EINVAL;
+
+ /* For 23 bit addressing, we encode the extra two bits in the slave
+ * id (and the slave's actual ID needs to be 0).
+ */
+ if (addr > 0x1fffff) {
+ if (slave->id != 0)
+ return -EINVAL;
+ id = (addr >> 21) & 0x3;
+ addr &= 0x1fffff;
+ }
+
+ *addrp = addr;
+ *idp = id;
+ return 0;
+}
+
+static int fsi_slave_report_and_clear_errors(struct fsi_slave *slave)
+{
+ struct fsi_master *master = slave->master;
+ __be32 irq, stat;
+ int rc, link;
+ uint8_t id;
+
+ link = slave->link;
+ id = slave->id;
+
+ rc = fsi_master_read(master, link, id, FSI_SLAVE_BASE + FSI_SISC,
+ &irq, sizeof(irq));
+ if (rc)
+ return rc;
+
+ rc = fsi_master_read(master, link, id, FSI_SLAVE_BASE + FSI_SSTAT,
+ &stat, sizeof(stat));
+ if (rc)
+ return rc;
+
+ dev_dbg(&slave->dev, "status: 0x%08x, sisc: 0x%08x\n",
+ be32_to_cpu(stat), be32_to_cpu(irq));
+
+ /* clear interrupts */
+ return fsi_master_write(master, link, id, FSI_SLAVE_BASE + FSI_SISC,
+ &irq, sizeof(irq));
+}
+
+/* Encode slave local bus echo delay */
+static inline uint32_t fsi_smode_echodly(int x)
+{
+ return (x & FSI_SMODE_ED_MASK) << FSI_SMODE_ED_SHIFT;
+}
+
+/* Encode slave local bus send delay */
+static inline uint32_t fsi_smode_senddly(int x)
+{
+ return (x & FSI_SMODE_SD_MASK) << FSI_SMODE_SD_SHIFT;
+}
+
+/* Encode slave local bus clock rate ratio */
+static inline uint32_t fsi_smode_lbcrr(int x)
+{
+ return (x & FSI_SMODE_LBCRR_MASK) << FSI_SMODE_LBCRR_SHIFT;
+}
+
+/* Encode slave ID */
+static inline uint32_t fsi_smode_sid(int x)
+{
+ return (x & FSI_SMODE_SID_MASK) << FSI_SMODE_SID_SHIFT;
+}
+
+static uint32_t fsi_slave_smode(int id, u8 t_senddly, u8 t_echodly)
+{
+ return FSI_SMODE_WSC | FSI_SMODE_ECRC
+ | fsi_smode_sid(id)
+ | fsi_smode_echodly(t_echodly - 1) | fsi_smode_senddly(t_senddly - 1)
+ | fsi_smode_lbcrr(0x8);
+}
+
+static int fsi_slave_set_smode(struct fsi_slave *slave)
+{
+ uint32_t smode;
+ __be32 data;
+
+ /* set our smode register with the slave ID field to 0; this enables
+ * extended slave addressing
+ */
+ smode = fsi_slave_smode(slave->id, slave->t_send_delay, slave->t_echo_delay);
+ data = cpu_to_be32(smode);
+
+ return fsi_master_write(slave->master, slave->link, slave->id,
+ FSI_SLAVE_BASE + FSI_SMODE,
+ &data, sizeof(data));
+}
+
+static int fsi_slave_handle_error(struct fsi_slave *slave, bool write,
+ uint32_t addr, size_t size)
+{
+ struct fsi_master *master = slave->master;
+ int rc, link;
+ uint32_t reg;
+ uint8_t id, send_delay, echo_delay;
+
+ if (discard_errors)
+ return -1;
+
+ link = slave->link;
+ id = slave->id;
+
+ dev_dbg(&slave->dev, "handling error on %s to 0x%08x[%zd]",
+ write ? "write" : "read", addr, size);
+
+ /* try a simple clear of error conditions, which may fail if we've lost
+ * communication with the slave
+ */
+ rc = fsi_slave_report_and_clear_errors(slave);
+ if (!rc)
+ return 0;
+
+ /* send a TERM and retry */
+ if (master->term) {
+ rc = master->term(master, link, id);
+ if (!rc) {
+ rc = fsi_master_read(master, link, id, 0,
+ &reg, sizeof(reg));
+ if (!rc)
+ rc = fsi_slave_report_and_clear_errors(slave);
+ if (!rc)
+ return 0;
+ }
+ }
+
+ send_delay = slave->t_send_delay;
+ echo_delay = slave->t_echo_delay;
+
+ /* getting serious, reset the slave via BREAK */
+ rc = fsi_master_break(master, link);
+ if (rc)
+ return rc;
+
+ slave->t_send_delay = send_delay;
+ slave->t_echo_delay = echo_delay;
+
+ rc = fsi_slave_set_smode(slave);
+ if (rc)
+ return rc;
+
+ if (master->link_config)
+ master->link_config(master, link,
+ slave->t_send_delay,
+ slave->t_echo_delay);
+
+ return fsi_slave_report_and_clear_errors(slave);
+}
+
+int fsi_slave_read(struct fsi_slave *slave, uint32_t addr,
+ void *val, size_t size)
+{
+ uint8_t id = slave->id;
+ int rc, err_rc, i;
+
+ rc = fsi_slave_calc_addr(slave, &addr, &id);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < slave_retries; i++) {
+ rc = fsi_master_read(slave->master, slave->link,
+ id, addr, val, size);
+ if (!rc)
+ break;
+
+ err_rc = fsi_slave_handle_error(slave, false, addr, size);
+ if (err_rc)
+ break;
+ }
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(fsi_slave_read);
+
+int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
+ const void *val, size_t size)
+{
+ uint8_t id = slave->id;
+ int rc, err_rc, i;
+
+ rc = fsi_slave_calc_addr(slave, &addr, &id);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < slave_retries; i++) {
+ rc = fsi_master_write(slave->master, slave->link,
+ id, addr, val, size);
+ if (!rc)
+ break;
+
+ err_rc = fsi_slave_handle_error(slave, true, addr, size);
+ if (err_rc)
+ break;
+ }
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(fsi_slave_write);
+
+int fsi_slave_claim_range(struct fsi_slave *slave,
+ uint32_t addr, uint32_t size)
+{
+ if (addr + size < addr)
+ return -EINVAL;
+
+ if (addr + size > slave->size)
+ return -EINVAL;
+
+ /* todo: check for overlapping claims */
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fsi_slave_claim_range);
+
+void fsi_slave_release_range(struct fsi_slave *slave,
+ uint32_t addr, uint32_t size)
+{
+}
+EXPORT_SYMBOL_GPL(fsi_slave_release_range);
+
+static bool fsi_device_node_matches(struct device *dev, struct device_node *np,
+ uint32_t addr, uint32_t size)
+{
+ u64 paddr, psize;
+
+ if (of_property_read_reg(np, 0, &paddr, &psize))
+ return false;
+
+ if (paddr != addr)
+ return false;
+
+ if (psize != size) {
+ dev_warn(dev,
+ "node %pOF matches probed address, but not size (got 0x%llx, expected 0x%x)",
+ np, psize, size);
+ }
+
+ return true;
+}
+
+/* Find a matching node for the slave engine at @address, using @size bytes
+ * of space. Returns NULL if not found, or a matching node with refcount
+ * already incremented.
+ */
+static struct device_node *fsi_device_find_of_node(struct fsi_device *dev)
+{
+ struct device_node *parent, *np;
+
+ parent = dev_of_node(&dev->slave->dev);
+ if (!parent)
+ return NULL;
+
+ for_each_child_of_node(parent, np) {
+ if (fsi_device_node_matches(&dev->dev, np,
+ dev->addr, dev->size))
+ return np;
+ }
+
+ return NULL;
+}
+
+static int fsi_slave_scan(struct fsi_slave *slave)
+{
+ uint32_t engine_addr;
+ int rc, i;
+
+ /*
+ * scan engines
+ *
+ * We keep the peek mode and slave engines for the core; so start
+ * at the third slot in the configuration table. We also need to
+ * skip the chip ID entry at the start of the address space.
+ */
+ engine_addr = engine_page_size * 3;
+ for (i = 2; i < engine_page_size / sizeof(uint32_t); i++) {
+ uint8_t slots, version, type, crc;
+ struct fsi_device *dev;
+ uint32_t conf;
+ __be32 data;
+
+ rc = fsi_slave_read(slave, (i + 1) * sizeof(data),
+ &data, sizeof(data));
+ if (rc) {
+ dev_warn(&slave->dev,
+ "error reading slave registers\n");
+ return -1;
+ }
+ conf = be32_to_cpu(data);
+
+ crc = crc4(0, conf, 32);
+ if (crc) {
+ dev_warn(&slave->dev,
+ "crc error in slave register at 0x%04x\n",
+ i);
+ return -1;
+ }
+
+ slots = (conf & FSI_SLAVE_CONF_SLOTS_MASK)
+ >> FSI_SLAVE_CONF_SLOTS_SHIFT;
+ version = (conf & FSI_SLAVE_CONF_VERSION_MASK)
+ >> FSI_SLAVE_CONF_VERSION_SHIFT;
+ type = (conf & FSI_SLAVE_CONF_TYPE_MASK)
+ >> FSI_SLAVE_CONF_TYPE_SHIFT;
+
+ /*
+ * Unused address areas are marked by a zero type value; this
+ * skips the defined address areas
+ */
+ if (type != 0 && slots != 0) {
+
+ /* create device */
+ dev = fsi_create_device(slave);
+ if (!dev)
+ return -ENOMEM;
+
+ dev->slave = slave;
+ dev->engine_type = type;
+ dev->version = version;
+ dev->unit = i;
+ dev->addr = engine_addr;
+ dev->size = slots * engine_page_size;
+
+ trace_fsi_dev_init(dev);
+
+ dev_dbg(&slave->dev,
+ "engine[%i]: type %x, version %x, addr %x size %x\n",
+ dev->unit, dev->engine_type, version,
+ dev->addr, dev->size);
+
+ dev_set_name(&dev->dev, "%02x:%02x:%02x:%02x",
+ slave->master->idx, slave->link,
+ slave->id, i - 2);
+ dev->dev.of_node = fsi_device_find_of_node(dev);
+
+ rc = device_register(&dev->dev);
+ if (rc) {
+ dev_warn(&slave->dev, "add failed: %d\n", rc);
+ put_device(&dev->dev);
+ }
+ }
+
+ engine_addr += slots * engine_page_size;
+
+ if (!(conf & FSI_SLAVE_CONF_NEXT_MASK))
+ break;
+ }
+
+ return 0;
+}
+
+static unsigned long aligned_access_size(size_t offset, size_t count)
+{
+ unsigned long offset_unit, count_unit;
+
+ /* Criteria:
+ *
+ * 1. Access size must be less than or equal to the maximum access
+ * width or the highest power-of-two factor of offset
+ * 2. Access size must be less than or equal to the amount specified by
+ * count
+ *
+ * The access width is optimal if we can calculate 1 to be strictly
+ * equal while still satisfying 2.
+ */
+
+ /* Find 1 by the bottom bit of offset (with a 4 byte access cap) */
+ offset_unit = BIT(__builtin_ctzl(offset | 4));
+
+ /* Find 2 by the top bit of count */
+ count_unit = BIT(8 * sizeof(unsigned long) - 1 - __builtin_clzl(count));
+
+ /* Constrain the maximum access width to the minimum of both criteria */
+ return BIT(__builtin_ctzl(offset_unit | count_unit));
+}
+
+static ssize_t fsi_slave_sysfs_raw_read(struct file *file,
+ struct kobject *kobj, struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count)
+{
+ struct fsi_slave *slave = to_fsi_slave(kobj_to_dev(kobj));
+ size_t total_len, read_len;
+ int rc;
+
+ if (off < 0)
+ return -EINVAL;
+
+ if (off > 0xffffffff || count > 0xffffffff || off + count > 0xffffffff)
+ return -EINVAL;
+
+ for (total_len = 0; total_len < count; total_len += read_len) {
+ read_len = aligned_access_size(off, count - total_len);
+
+ rc = fsi_slave_read(slave, off, buf + total_len, read_len);
+ if (rc)
+ return rc;
+
+ off += read_len;
+ }
+
+ return count;
+}
+
+static ssize_t fsi_slave_sysfs_raw_write(struct file *file,
+ struct kobject *kobj, struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct fsi_slave *slave = to_fsi_slave(kobj_to_dev(kobj));
+ size_t total_len, write_len;
+ int rc;
+
+ if (off < 0)
+ return -EINVAL;
+
+ if (off > 0xffffffff || count > 0xffffffff || off + count > 0xffffffff)
+ return -EINVAL;
+
+ for (total_len = 0; total_len < count; total_len += write_len) {
+ write_len = aligned_access_size(off, count - total_len);
+
+ rc = fsi_slave_write(slave, off, buf + total_len, write_len);
+ if (rc)
+ return rc;
+
+ off += write_len;
+ }
+
+ return count;
+}
+
+static const struct bin_attribute fsi_slave_raw_attr = {
+ .attr = {
+ .name = "raw",
+ .mode = 0600,
+ },
+ .size = 0,
+ .read = fsi_slave_sysfs_raw_read,
+ .write = fsi_slave_sysfs_raw_write,
+};
+
+static void fsi_slave_release(struct device *dev)
+{
+ struct fsi_slave *slave = to_fsi_slave(dev);
+
+ fsi_free_minor(slave->dev.devt);
+ of_node_put(dev->of_node);
+ kfree(slave);
+}
+
+static bool fsi_slave_node_matches(struct device_node *np,
+ int link, uint8_t id)
+{
+ u64 addr;
+
+ if (of_property_read_reg(np, 0, &addr, NULL))
+ return false;
+
+ return addr == (((u64)link << 32) | id);
+}
+
+/* Find a matching node for the slave at (link, id). Returns NULL if none
+ * found, or a matching node with refcount already incremented.
+ */
+static struct device_node *fsi_slave_find_of_node(struct fsi_master *master,
+ int link, uint8_t id)
+{
+ struct device_node *parent, *np;
+
+ parent = dev_of_node(&master->dev);
+ if (!parent)
+ return NULL;
+
+ for_each_child_of_node(parent, np) {
+ if (fsi_slave_node_matches(np, link, id))
+ return np;
+ }
+
+ return NULL;
+}
+
+static ssize_t cfam_read(struct file *filep, char __user *buf, size_t count,
+ loff_t *offset)
+{
+ struct fsi_slave *slave = filep->private_data;
+ size_t total_len, read_len;
+ loff_t off = *offset;
+ ssize_t rc;
+
+ if (off < 0)
+ return -EINVAL;
+
+ if (off > 0xffffffff || count > 0xffffffff || off + count > 0xffffffff)
+ return -EINVAL;
+
+ for (total_len = 0; total_len < count; total_len += read_len) {
+ __be32 data;
+
+ read_len = min_t(size_t, count, 4);
+ read_len -= off & 0x3;
+
+ rc = fsi_slave_read(slave, off, &data, read_len);
+ if (rc)
+ goto fail;
+ rc = copy_to_user(buf + total_len, &data, read_len);
+ if (rc) {
+ rc = -EFAULT;
+ goto fail;
+ }
+ off += read_len;
+ }
+ rc = count;
+ fail:
+ *offset = off;
+ return rc;
+}
+
+static ssize_t cfam_write(struct file *filep, const char __user *buf,
+ size_t count, loff_t *offset)
+{
+ struct fsi_slave *slave = filep->private_data;
+ size_t total_len, write_len;
+ loff_t off = *offset;
+ ssize_t rc;
+
+
+ if (off < 0)
+ return -EINVAL;
+
+ if (off > 0xffffffff || count > 0xffffffff || off + count > 0xffffffff)
+ return -EINVAL;
+
+ for (total_len = 0; total_len < count; total_len += write_len) {
+ __be32 data;
+
+ write_len = min_t(size_t, count, 4);
+ write_len -= off & 0x3;
+
+ rc = copy_from_user(&data, buf + total_len, write_len);
+ if (rc) {
+ rc = -EFAULT;
+ goto fail;
+ }
+ rc = fsi_slave_write(slave, off, &data, write_len);
+ if (rc)
+ goto fail;
+ off += write_len;
+ }
+ rc = count;
+ fail:
+ *offset = off;
+ return rc;
+}
+
+static loff_t cfam_llseek(struct file *file, loff_t offset, int whence)
+{
+ switch (whence) {
+ case SEEK_CUR:
+ break;
+ case SEEK_SET:
+ file->f_pos = offset;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return offset;
+}
+
+static int cfam_open(struct inode *inode, struct file *file)
+{
+ struct fsi_slave *slave = container_of(inode->i_cdev, struct fsi_slave, cdev);
+
+ file->private_data = slave;
+
+ return 0;
+}
+
+static const struct file_operations cfam_fops = {
+ .owner = THIS_MODULE,
+ .open = cfam_open,
+ .llseek = cfam_llseek,
+ .read = cfam_read,
+ .write = cfam_write,
+};
+
+static ssize_t send_term_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct fsi_slave *slave = to_fsi_slave(dev);
+ struct fsi_master *master = slave->master;
+
+ if (!master->term)
+ return -ENODEV;
+
+ master->term(master, slave->link, slave->id);
+ return count;
+}
+
+static DEVICE_ATTR_WO(send_term);
+
+static ssize_t slave_send_echo_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct fsi_slave *slave = to_fsi_slave(dev);
+
+ return sprintf(buf, "%u\n", slave->t_send_delay);
+}
+
+static ssize_t slave_send_echo_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct fsi_slave *slave = to_fsi_slave(dev);
+ struct fsi_master *master = slave->master;
+ unsigned long val;
+ int rc;
+
+ if (kstrtoul(buf, 0, &val) < 0)
+ return -EINVAL;
+
+ if (val < 1 || val > 16)
+ return -EINVAL;
+
+ if (!master->link_config)
+ return -ENXIO;
+
+ /* Current HW mandates that send and echo delay are identical */
+ slave->t_send_delay = val;
+ slave->t_echo_delay = val;
+
+ rc = fsi_slave_set_smode(slave);
+ if (rc < 0)
+ return rc;
+ if (master->link_config)
+ master->link_config(master, slave->link,
+ slave->t_send_delay,
+ slave->t_echo_delay);
+
+ return count;
+}
+
+static DEVICE_ATTR(send_echo_delays, 0600,
+ slave_send_echo_show, slave_send_echo_store);
+
+static ssize_t chip_id_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct fsi_slave *slave = to_fsi_slave(dev);
+
+ return sprintf(buf, "%d\n", slave->chip_id);
+}
+
+static DEVICE_ATTR_RO(chip_id);
+
+static ssize_t cfam_id_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct fsi_slave *slave = to_fsi_slave(dev);
+
+ return sprintf(buf, "0x%x\n", slave->cfam_id);
+}
+
+static DEVICE_ATTR_RO(cfam_id);
+
+static struct attribute *cfam_attr[] = {
+ &dev_attr_send_echo_delays.attr,
+ &dev_attr_chip_id.attr,
+ &dev_attr_cfam_id.attr,
+ &dev_attr_send_term.attr,
+ NULL,
+};
+
+static const struct attribute_group cfam_attr_group = {
+ .attrs = cfam_attr,
+};
+
+static const struct attribute_group *cfam_attr_groups[] = {
+ &cfam_attr_group,
+ NULL,
+};
+
+static char *cfam_devnode(const struct device *dev, umode_t *mode,
+ kuid_t *uid, kgid_t *gid)
+{
+ const struct fsi_slave *slave = to_fsi_slave(dev);
+
+#ifdef CONFIG_FSI_NEW_DEV_NODE
+ return kasprintf(GFP_KERNEL, "fsi/cfam%d", slave->cdev_idx);
+#else
+ return kasprintf(GFP_KERNEL, "cfam%d", slave->cdev_idx);
+#endif
+}
+
+static const struct device_type cfam_type = {
+ .name = "cfam",
+ .devnode = cfam_devnode,
+ .groups = cfam_attr_groups
+};
+
+static char *fsi_cdev_devnode(const struct device *dev, umode_t *mode,
+ kuid_t *uid, kgid_t *gid)
+{
+#ifdef CONFIG_FSI_NEW_DEV_NODE
+ return kasprintf(GFP_KERNEL, "fsi/%s", dev_name(dev));
+#else
+ return kasprintf(GFP_KERNEL, "%s", dev_name(dev));
+#endif
+}
+
+const struct device_type fsi_cdev_type = {
+ .name = "fsi-cdev",
+ .devnode = fsi_cdev_devnode,
+};
+EXPORT_SYMBOL_GPL(fsi_cdev_type);
+
+/* Backward compatible /dev/ numbering in "old style" mode */
+static int fsi_adjust_index(int index)
+{
+#ifdef CONFIG_FSI_NEW_DEV_NODE
+ return index;
+#else
+ return index + 1;
+#endif
+}
+
+static int __fsi_get_new_minor(struct fsi_slave *slave, enum fsi_dev_type type,
+ dev_t *out_dev, int *out_index)
+{
+ int cid = slave->chip_id;
+ int id;
+
+ /* Check if we qualify for legacy numbering */
+ if (cid >= 0 && cid < 16 && type < 4) {
+ /*
+ * Try reserving the legacy number, which has 0 - 0x3f reserved
+ * in the ida range. cid goes up to 0xf and type contains two
+ * bits, so construct the id with the below two bit shift.
+ */
+ id = (cid << 2) | type;
+ id = ida_alloc_range(&fsi_minor_ida, id, id, GFP_KERNEL);
+ if (id >= 0) {
+ *out_index = fsi_adjust_index(cid);
+ *out_dev = fsi_base_dev + id;
+ return 0;
+ }
+ /* Other failure */
+ if (id != -ENOSPC)
+ return id;
+ /* Fallback to non-legacy allocation */
+ }
+ id = ida_alloc_range(&fsi_minor_ida, FSI_CHAR_LEGACY_TOP,
+ FSI_CHAR_MAX_DEVICES - 1, GFP_KERNEL);
+ if (id < 0)
+ return id;
+ *out_index = fsi_adjust_index(id);
+ *out_dev = fsi_base_dev + id;
+ return 0;
+}
+
+static const char *const fsi_dev_type_names[] = {
+ "cfam",
+ "sbefifo",
+ "scom",
+ "occ",
+};
+
+int fsi_get_new_minor(struct fsi_device *fdev, enum fsi_dev_type type,
+ dev_t *out_dev, int *out_index)
+{
+ if (fdev->dev.of_node) {
+ int aid = of_alias_get_id(fdev->dev.of_node, fsi_dev_type_names[type]);
+
+ if (aid >= 0) {
+ /* Use the same scheme as the legacy numbers. */
+ int id = (aid << 2) | type;
+
+ id = ida_alloc_range(&fsi_minor_ida, id, id, GFP_KERNEL);
+ if (id >= 0) {
+ *out_index = aid;
+ *out_dev = fsi_base_dev + id;
+ return 0;
+ }
+
+ if (id != -ENOSPC)
+ return id;
+ }
+ }
+
+ return __fsi_get_new_minor(fdev->slave, type, out_dev, out_index);
+}
+EXPORT_SYMBOL_GPL(fsi_get_new_minor);
+
+void fsi_free_minor(dev_t dev)
+{
+ ida_free(&fsi_minor_ida, MINOR(dev));
+}
+EXPORT_SYMBOL_GPL(fsi_free_minor);
+
+static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
+{
+ uint32_t cfam_id;
+ struct fsi_slave *slave;
+ uint8_t crc;
+ __be32 data, llmode, slbus;
+ int rc;
+
+ /* Currently, we only support single slaves on a link, and use the
+ * full 23-bit address range
+ */
+ if (id != 0)
+ return -EINVAL;
+
+ rc = fsi_master_read(master, link, id, 0, &data, sizeof(data));
+ if (rc) {
+ dev_dbg(&master->dev, "can't read slave %02x:%02x %d\n",
+ link, id, rc);
+ return -ENODEV;
+ }
+ cfam_id = be32_to_cpu(data);
+
+ crc = crc4(0, cfam_id, 32);
+ if (crc) {
+ trace_fsi_slave_invalid_cfam(master, link, cfam_id);
+ dev_warn(&master->dev, "slave %02x:%02x invalid cfam id CRC!\n",
+ link, id);
+ return -EIO;
+ }
+
+ dev_dbg(&master->dev, "fsi: found chip %08x at %02x:%02x:%02x\n",
+ cfam_id, master->idx, link, id);
+
+ /* If we're behind a master that doesn't provide a self-running bus
+ * clock, put the slave into async mode
+ */
+ if (master->flags & FSI_MASTER_FLAG_SWCLOCK) {
+ llmode = cpu_to_be32(FSI_LLMODE_ASYNC);
+ rc = fsi_master_write(master, link, id,
+ FSI_SLAVE_BASE + FSI_LLMODE,
+ &llmode, sizeof(llmode));
+ if (rc)
+ dev_warn(&master->dev,
+ "can't set llmode on slave:%02x:%02x %d\n",
+ link, id, rc);
+ }
+
+ /* We can communicate with a slave; create the slave device and
+ * register.
+ */
+ slave = kzalloc(sizeof(*slave), GFP_KERNEL);
+ if (!slave)
+ return -ENOMEM;
+
+ dev_set_name(&slave->dev, "slave@%02x:%02x", link, id);
+ slave->dev.type = &cfam_type;
+ slave->dev.parent = &master->dev;
+ slave->dev.of_node = fsi_slave_find_of_node(master, link, id);
+ slave->dev.release = fsi_slave_release;
+ device_initialize(&slave->dev);
+ slave->cfam_id = cfam_id;
+ slave->master = master;
+ slave->link = link;
+ slave->id = id;
+ slave->size = FSI_SLAVE_SIZE_23b;
+ slave->t_send_delay = 16;
+ slave->t_echo_delay = 16;
+
+ /* Get chip ID if any */
+ slave->chip_id = -1;
+ if (slave->dev.of_node) {
+ uint32_t prop;
+ if (!of_property_read_u32(slave->dev.of_node, "chip-id", &prop))
+ slave->chip_id = prop;
+
+ }
+
+ slbus = cpu_to_be32(FSI_SLBUS_FORCE);
+ rc = fsi_master_write(master, link, id, FSI_SLAVE_BASE + FSI_SLBUS,
+ &slbus, sizeof(slbus));
+ if (rc)
+ dev_warn(&master->dev,
+ "can't set slbus on slave:%02x:%02x %d\n", link, id,
+ rc);
+
+ rc = fsi_slave_set_smode(slave);
+ if (rc) {
+ dev_warn(&master->dev,
+ "can't set smode on slave:%02x:%02x %d\n",
+ link, id, rc);
+ goto err_free;
+ }
+
+ /* Allocate a minor in the FSI space */
+ rc = __fsi_get_new_minor(slave, fsi_dev_cfam, &slave->dev.devt,
+ &slave->cdev_idx);
+ if (rc)
+ goto err_free;
+
+ trace_fsi_slave_init(slave);
+
+ /* Create chardev for userspace access */
+ cdev_init(&slave->cdev, &cfam_fops);
+ rc = cdev_device_add(&slave->cdev, &slave->dev);
+ if (rc) {
+ dev_err(&slave->dev, "Error %d creating slave device\n", rc);
+ goto err_free_ida;
+ }
+
+ /* Now that we have the cdev registered with the core, any fatal
+ * failures beyond this point will need to clean up through
+ * cdev_device_del(). Fortunately though, nothing past here is fatal.
+ */
+
+ if (master->link_config)
+ master->link_config(master, link,
+ slave->t_send_delay,
+ slave->t_echo_delay);
+
+ /* Legacy raw file -> to be removed */
+ rc = device_create_bin_file(&slave->dev, &fsi_slave_raw_attr);
+ if (rc)
+ dev_warn(&slave->dev, "failed to create raw attr: %d\n", rc);
+
+
+ rc = fsi_slave_scan(slave);
+ if (rc)
+ dev_dbg(&master->dev, "failed during slave scan with: %d\n",
+ rc);
+
+ return 0;
+
+err_free_ida:
+ fsi_free_minor(slave->dev.devt);
+err_free:
+ of_node_put(slave->dev.of_node);
+ kfree(slave);
+ return rc;
+}
+
+/* FSI master support */
+static int fsi_check_access(uint32_t addr, size_t size)
+{
+ if (size == 4) {
+ if (addr & 0x3)
+ return -EINVAL;
+ } else if (size == 2) {
+ if (addr & 0x1)
+ return -EINVAL;
+ } else if (size != 1)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int fsi_master_read(struct fsi_master *master, int link,
+ uint8_t slave_id, uint32_t addr, void *val, size_t size)
+{
+ int rc;
+
+ trace_fsi_master_read(master, link, slave_id, addr, size);
+
+ rc = fsi_check_access(addr, size);
+ if (!rc)
+ rc = master->read(master, link, slave_id, addr, val, size);
+
+ trace_fsi_master_rw_result(master, link, slave_id, addr, size,
+ false, val, rc);
+
+ return rc;
+}
+
+static int fsi_master_write(struct fsi_master *master, int link,
+ uint8_t slave_id, uint32_t addr, const void *val, size_t size)
+{
+ int rc;
+
+ trace_fsi_master_write(master, link, slave_id, addr, size, val);
+
+ rc = fsi_check_access(addr, size);
+ if (!rc)
+ rc = master->write(master, link, slave_id, addr, val, size);
+
+ trace_fsi_master_rw_result(master, link, slave_id, addr, size,
+ true, val, rc);
+
+ return rc;
+}
+
+static int fsi_master_link_disable(struct fsi_master *master, int link)
+{
+ if (master->link_enable)
+ return master->link_enable(master, link, false);
+
+ return 0;
+}
+
+static int fsi_master_link_enable(struct fsi_master *master, int link)
+{
+ if (master->link_enable)
+ return master->link_enable(master, link, true);
+
+ return 0;
+}
+
+/*
+ * Issue a break command on this link
+ */
+static int fsi_master_break(struct fsi_master *master, int link)
+{
+ int rc = 0;
+
+ trace_fsi_master_break(master, link);
+
+ if (master->send_break)
+ rc = master->send_break(master, link);
+ if (master->link_config)
+ master->link_config(master, link, 16, 16);
+
+ return rc;
+}
+
+static int fsi_master_scan(struct fsi_master *master)
+{
+ int link, rc;
+
+ trace_fsi_master_scan(master, true);
+ for (link = 0; link < master->n_links; link++) {
+ rc = fsi_master_link_enable(master, link);
+ if (rc) {
+ dev_dbg(&master->dev,
+ "enable link %d failed: %d\n", link, rc);
+ continue;
+ }
+ rc = fsi_master_break(master, link);
+ if (rc) {
+ fsi_master_link_disable(master, link);
+ dev_dbg(&master->dev,
+ "break to link %d failed: %d\n", link, rc);
+ continue;
+ }
+
+ rc = fsi_slave_init(master, link, 0);
+ if (rc)
+ fsi_master_link_disable(master, link);
+ }
+
+ return 0;
+}
+
+static int fsi_slave_remove_device(struct device *dev, void *arg)
+{
+ device_unregister(dev);
+ return 0;
+}
+
+static int fsi_master_remove_slave(struct device *dev, void *arg)
+{
+ struct fsi_slave *slave = to_fsi_slave(dev);
+
+ device_for_each_child(dev, NULL, fsi_slave_remove_device);
+ cdev_device_del(&slave->cdev, &slave->dev);
+ put_device(dev);
+ return 0;
+}
+
+static void fsi_master_unscan(struct fsi_master *master)
+{
+ trace_fsi_master_scan(master, false);
+ device_for_each_child(&master->dev, NULL, fsi_master_remove_slave);
+}
+
+int fsi_master_rescan(struct fsi_master *master)
+{
+ int rc;
+
+ mutex_lock(&master->scan_lock);
+ fsi_master_unscan(master);
+ rc = fsi_master_scan(master);
+ mutex_unlock(&master->scan_lock);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(fsi_master_rescan);
+
+static ssize_t master_rescan_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct fsi_master *master = to_fsi_master(dev);
+ int rc;
+
+ rc = fsi_master_rescan(master);
+ if (rc < 0)
+ return rc;
+
+ return count;
+}
+
+static DEVICE_ATTR(rescan, 0200, NULL, master_rescan_store);
+
+static ssize_t master_break_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct fsi_master *master = to_fsi_master(dev);
+
+ fsi_master_break(master, 0);
+
+ return count;
+}
+
+static DEVICE_ATTR(break, 0200, NULL, master_break_store);
+
+static struct attribute *master_attrs[] = {
+ &dev_attr_break.attr,
+ &dev_attr_rescan.attr,
+ NULL
+};
+
+ATTRIBUTE_GROUPS(master);
+
+static struct class fsi_master_class = {
+ .name = "fsi-master",
+ .dev_groups = master_groups,
+};
+
+int fsi_master_register(struct fsi_master *master)
+{
+ int rc;
+ struct device_node *np;
+
+ mutex_init(&master->scan_lock);
+
+ /* Alloc the requested index if it's non-zero */
+ if (master->idx) {
+ master->idx = ida_alloc_range(&master_ida, master->idx,
+ master->idx, GFP_KERNEL);
+ } else {
+ master->idx = ida_alloc(&master_ida, GFP_KERNEL);
+ }
+
+ if (master->idx < 0)
+ return master->idx;
+
+ if (!dev_name(&master->dev))
+ dev_set_name(&master->dev, "fsi%d", master->idx);
+
+ master->dev.class = &fsi_master_class;
+
+ mutex_lock(&master->scan_lock);
+ rc = device_register(&master->dev);
+ if (rc) {
+ ida_free(&master_ida, master->idx);
+ goto out;
+ }
+
+ np = dev_of_node(&master->dev);
+ if (!of_property_read_bool(np, "no-scan-on-init")) {
+ fsi_master_scan(master);
+ }
+out:
+ mutex_unlock(&master->scan_lock);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(fsi_master_register);
+
+void fsi_master_unregister(struct fsi_master *master)
+{
+ int idx = master->idx;
+
+ trace_fsi_master_unregister(master);
+
+ mutex_lock(&master->scan_lock);
+ fsi_master_unscan(master);
+ master->n_links = 0;
+ mutex_unlock(&master->scan_lock);
+
+ device_unregister(&master->dev);
+ ida_free(&master_ida, idx);
+}
+EXPORT_SYMBOL_GPL(fsi_master_unregister);
+
+/* FSI core & Linux bus type definitions */
+
+static int fsi_bus_match(struct device *dev, struct device_driver *drv)
+{
+ struct fsi_device *fsi_dev = to_fsi_dev(dev);
+ struct fsi_driver *fsi_drv = to_fsi_drv(drv);
+ const struct fsi_device_id *id;
+
+ if (!fsi_drv->id_table)
+ return 0;
+
+ for (id = fsi_drv->id_table; id->engine_type; id++) {
+ if (id->engine_type != fsi_dev->engine_type)
+ continue;
+ if (id->version == FSI_VERSION_ANY ||
+ id->version == fsi_dev->version) {
+ if (drv->of_match_table) {
+ if (of_driver_match_device(dev, drv))
+ return 1;
+ } else {
+ return 1;
+ }
+ }
+ }
+
+ return 0;
+}
+
+int fsi_driver_register(struct fsi_driver *fsi_drv)
+{
+ if (!fsi_drv)
+ return -EINVAL;
+ if (!fsi_drv->id_table)
+ return -EINVAL;
+
+ return driver_register(&fsi_drv->drv);
+}
+EXPORT_SYMBOL_GPL(fsi_driver_register);
+
+void fsi_driver_unregister(struct fsi_driver *fsi_drv)
+{
+ driver_unregister(&fsi_drv->drv);
+}
+EXPORT_SYMBOL_GPL(fsi_driver_unregister);
+
+struct bus_type fsi_bus_type = {
+ .name = "fsi",
+ .match = fsi_bus_match,
+};
+EXPORT_SYMBOL_GPL(fsi_bus_type);
+
+static int __init fsi_init(void)
+{
+ int rc;
+
+ rc = alloc_chrdev_region(&fsi_base_dev, 0, FSI_CHAR_MAX_DEVICES, "fsi");
+ if (rc)
+ return rc;
+ rc = bus_register(&fsi_bus_type);
+ if (rc)
+ goto fail_bus;
+
+ rc = class_register(&fsi_master_class);
+ if (rc)
+ goto fail_class;
+
+ return 0;
+
+ fail_class:
+ bus_unregister(&fsi_bus_type);
+ fail_bus:
+ unregister_chrdev_region(fsi_base_dev, FSI_CHAR_MAX_DEVICES);
+ return rc;
+}
+postcore_initcall(fsi_init);
+
+static void fsi_exit(void)
+{
+ class_unregister(&fsi_master_class);
+ bus_unregister(&fsi_bus_type);
+ unregister_chrdev_region(fsi_base_dev, FSI_CHAR_MAX_DEVICES);
+ ida_destroy(&fsi_minor_ida);
+}
+module_exit(fsi_exit);
+module_param(discard_errors, int, 0664);
+MODULE_LICENSE("GPL");
+MODULE_PARM_DESC(discard_errors, "Don't invoke error handling on bus accesses");
diff --git a/drivers/fsi/fsi-master-aspeed.c b/drivers/fsi/fsi-master-aspeed.c
new file mode 100644
index 000000000..f0a19cd45
--- /dev/null
+++ b/drivers/fsi/fsi-master-aspeed.c
@@ -0,0 +1,675 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (C) IBM Corporation 2018
+// FSI master driver for AST2600
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/fsi.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/iopoll.h>
+#include <linux/gpio/consumer.h>
+
+#include "fsi-master.h"
+
+struct fsi_master_aspeed {
+ struct fsi_master master;
+ struct mutex lock; /* protect HW access */
+ struct device *dev;
+ void __iomem *base;
+ struct clk *clk;
+ struct gpio_desc *cfam_reset_gpio;
+};
+
+#define to_fsi_master_aspeed(m) \
+ container_of(m, struct fsi_master_aspeed, master)
+
+/* Control register (size 0x400) */
+static const u32 ctrl_base = 0x80000000;
+
+static const u32 fsi_base = 0xa0000000;
+
+#define OPB_FSI_VER 0x00
+#define OPB_TRIGGER 0x04
+#define OPB_CTRL_BASE 0x08
+#define OPB_FSI_BASE 0x0c
+#define OPB_CLK_SYNC 0x3c
+#define OPB_IRQ_CLEAR 0x40
+#define OPB_IRQ_MASK 0x44
+#define OPB_IRQ_STATUS 0x48
+
+#define OPB0_SELECT 0x10
+#define OPB0_RW 0x14
+#define OPB0_XFER_SIZE 0x18
+#define OPB0_FSI_ADDR 0x1c
+#define OPB0_FSI_DATA_W 0x20
+#define OPB0_STATUS 0x80
+#define OPB0_FSI_DATA_R 0x84
+
+#define OPB0_WRITE_ORDER1 0x4c
+#define OPB0_WRITE_ORDER2 0x50
+#define OPB1_WRITE_ORDER1 0x54
+#define OPB1_WRITE_ORDER2 0x58
+#define OPB0_READ_ORDER1 0x5c
+#define OPB1_READ_ORDER2 0x60
+
+#define OPB_RETRY_COUNTER 0x64
+
+/* OPBn_STATUS */
+#define STATUS_HALFWORD_ACK BIT(0)
+#define STATUS_FULLWORD_ACK BIT(1)
+#define STATUS_ERR_ACK BIT(2)
+#define STATUS_RETRY BIT(3)
+#define STATUS_TIMEOUT BIT(4)
+
+/* OPB_IRQ_MASK */
+#define OPB1_XFER_ACK_EN BIT(17)
+#define OPB0_XFER_ACK_EN BIT(16)
+
+/* OPB_RW */
+#define CMD_READ BIT(0)
+#define CMD_WRITE 0
+
+/* OPBx_XFER_SIZE */
+#define XFER_FULLWORD (BIT(1) | BIT(0))
+#define XFER_HALFWORD (BIT(0))
+#define XFER_BYTE (0)
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/fsi_master_aspeed.h>
+
+#define FSI_LINK_ENABLE_SETUP_TIME 10 /* in mS */
+
+/* Run the bus at maximum speed by default */
+#define FSI_DIVISOR_DEFAULT 1
+#define FSI_DIVISOR_CABLED 2
+static u16 aspeed_fsi_divisor = FSI_DIVISOR_DEFAULT;
+module_param_named(bus_div,aspeed_fsi_divisor, ushort, 0);
+
+#define OPB_POLL_TIMEOUT 500
+
+static int __opb_write(struct fsi_master_aspeed *aspeed, u32 addr,
+ u32 val, u32 transfer_size)
+{
+ void __iomem *base = aspeed->base;
+ u32 reg, status;
+ int ret;
+
+ /*
+ * The ordering of these writes up until the trigger
+ * write does not matter, so use writel_relaxed.
+ */
+ writel_relaxed(CMD_WRITE, base + OPB0_RW);
+ writel_relaxed(transfer_size, base + OPB0_XFER_SIZE);
+ writel_relaxed(addr, base + OPB0_FSI_ADDR);
+ writel_relaxed(val, base + OPB0_FSI_DATA_W);
+ writel_relaxed(0x1, base + OPB_IRQ_CLEAR);
+ writel(0x1, base + OPB_TRIGGER);
+
+ ret = readl_poll_timeout(base + OPB_IRQ_STATUS, reg,
+ (reg & OPB0_XFER_ACK_EN) != 0,
+ 0, OPB_POLL_TIMEOUT);
+
+ status = readl(base + OPB0_STATUS);
+
+ trace_fsi_master_aspeed_opb_write(addr, val, transfer_size, status, reg);
+
+ /* Return error when poll timed out */
+ if (ret)
+ return ret;
+
+ /* Command failed, master will reset */
+ if (status & STATUS_ERR_ACK)
+ return -EIO;
+
+ return 0;
+}
+
+static int opb_writeb(struct fsi_master_aspeed *aspeed, u32 addr, u8 val)
+{
+ return __opb_write(aspeed, addr, val, XFER_BYTE);
+}
+
+static int opb_writew(struct fsi_master_aspeed *aspeed, u32 addr, __be16 val)
+{
+ return __opb_write(aspeed, addr, (__force u16)val, XFER_HALFWORD);
+}
+
+static int opb_writel(struct fsi_master_aspeed *aspeed, u32 addr, __be32 val)
+{
+ return __opb_write(aspeed, addr, (__force u32)val, XFER_FULLWORD);
+}
+
+static int __opb_read(struct fsi_master_aspeed *aspeed, uint32_t addr,
+ u32 transfer_size, void *out)
+{
+ void __iomem *base = aspeed->base;
+ u32 result, reg;
+ int status, ret;
+
+ /*
+ * The ordering of these writes up until the trigger
+ * write does not matter, so use writel_relaxed.
+ */
+ writel_relaxed(CMD_READ, base + OPB0_RW);
+ writel_relaxed(transfer_size, base + OPB0_XFER_SIZE);
+ writel_relaxed(addr, base + OPB0_FSI_ADDR);
+ writel_relaxed(0x1, base + OPB_IRQ_CLEAR);
+ writel(0x1, base + OPB_TRIGGER);
+
+ ret = readl_poll_timeout(base + OPB_IRQ_STATUS, reg,
+ (reg & OPB0_XFER_ACK_EN) != 0,
+ 0, OPB_POLL_TIMEOUT);
+
+ status = readl(base + OPB0_STATUS);
+
+ result = readl(base + OPB0_FSI_DATA_R);
+
+ trace_fsi_master_aspeed_opb_read(addr, transfer_size, result,
+ readl(base + OPB0_STATUS),
+ reg);
+
+ /* Return error when poll timed out */
+ if (ret)
+ return ret;
+
+ /* Command failed, master will reset */
+ if (status & STATUS_ERR_ACK)
+ return -EIO;
+
+ if (out) {
+ switch (transfer_size) {
+ case XFER_BYTE:
+ *(u8 *)out = result;
+ break;
+ case XFER_HALFWORD:
+ *(u16 *)out = result;
+ break;
+ case XFER_FULLWORD:
+ *(u32 *)out = result;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ }
+
+ return 0;
+}
+
+static int opb_readl(struct fsi_master_aspeed *aspeed, uint32_t addr, __be32 *out)
+{
+ return __opb_read(aspeed, addr, XFER_FULLWORD, out);
+}
+
+static int opb_readw(struct fsi_master_aspeed *aspeed, uint32_t addr, __be16 *out)
+{
+ return __opb_read(aspeed, addr, XFER_HALFWORD, (void *)out);
+}
+
+static int opb_readb(struct fsi_master_aspeed *aspeed, uint32_t addr, u8 *out)
+{
+ return __opb_read(aspeed, addr, XFER_BYTE, (void *)out);
+}
+
+static int check_errors(struct fsi_master_aspeed *aspeed, int err)
+{
+ int ret;
+
+ if (trace_fsi_master_aspeed_opb_error_enabled()) {
+ __be32 mresp0, mstap0, mesrb0;
+
+ opb_readl(aspeed, ctrl_base + FSI_MRESP0, &mresp0);
+ opb_readl(aspeed, ctrl_base + FSI_MSTAP0, &mstap0);
+ opb_readl(aspeed, ctrl_base + FSI_MESRB0, &mesrb0);
+
+ trace_fsi_master_aspeed_opb_error(
+ be32_to_cpu(mresp0),
+ be32_to_cpu(mstap0),
+ be32_to_cpu(mesrb0));
+ }
+
+ if (err == -EIO) {
+ /* Check MAEB (0x70) ? */
+
+ /* Then clear errors in master */
+ ret = opb_writel(aspeed, ctrl_base + FSI_MRESP0,
+ cpu_to_be32(FSI_MRESP_RST_ALL_MASTER));
+ if (ret) {
+ /* TODO: log? return different code? */
+ return ret;
+ }
+ /* TODO: confirm that 0x70 was okay */
+ }
+
+ /* This will pass through timeout errors */
+ return err;
+}
+
+static int aspeed_master_read(struct fsi_master *master, int link,
+ uint8_t id, uint32_t addr, void *val, size_t size)
+{
+ struct fsi_master_aspeed *aspeed = to_fsi_master_aspeed(master);
+ int ret;
+
+ if (id > 0x3)
+ return -EINVAL;
+
+ addr |= id << 21;
+ addr += link * FSI_HUB_LINK_SIZE;
+
+ mutex_lock(&aspeed->lock);
+
+ switch (size) {
+ case 1:
+ ret = opb_readb(aspeed, fsi_base + addr, val);
+ break;
+ case 2:
+ ret = opb_readw(aspeed, fsi_base + addr, val);
+ break;
+ case 4:
+ ret = opb_readl(aspeed, fsi_base + addr, val);
+ break;
+ default:
+ ret = -EINVAL;
+ goto done;
+ }
+
+ ret = check_errors(aspeed, ret);
+done:
+ mutex_unlock(&aspeed->lock);
+ return ret;
+}
+
+static int aspeed_master_write(struct fsi_master *master, int link,
+ uint8_t id, uint32_t addr, const void *val, size_t size)
+{
+ struct fsi_master_aspeed *aspeed = to_fsi_master_aspeed(master);
+ int ret;
+
+ if (id > 0x3)
+ return -EINVAL;
+
+ addr |= id << 21;
+ addr += link * FSI_HUB_LINK_SIZE;
+
+ mutex_lock(&aspeed->lock);
+
+ switch (size) {
+ case 1:
+ ret = opb_writeb(aspeed, fsi_base + addr, *(u8 *)val);
+ break;
+ case 2:
+ ret = opb_writew(aspeed, fsi_base + addr, *(__be16 *)val);
+ break;
+ case 4:
+ ret = opb_writel(aspeed, fsi_base + addr, *(__be32 *)val);
+ break;
+ default:
+ ret = -EINVAL;
+ goto done;
+ }
+
+ ret = check_errors(aspeed, ret);
+done:
+ mutex_unlock(&aspeed->lock);
+ return ret;
+}
+
+static int aspeed_master_link_enable(struct fsi_master *master, int link,
+ bool enable)
+{
+ struct fsi_master_aspeed *aspeed = to_fsi_master_aspeed(master);
+ int idx, bit, ret;
+ __be32 reg;
+
+ idx = link / 32;
+ bit = link % 32;
+
+ reg = cpu_to_be32(0x80000000 >> bit);
+
+ mutex_lock(&aspeed->lock);
+
+ if (!enable) {
+ ret = opb_writel(aspeed, ctrl_base + FSI_MCENP0 + (4 * idx), reg);
+ goto done;
+ }
+
+ ret = opb_writel(aspeed, ctrl_base + FSI_MSENP0 + (4 * idx), reg);
+ if (ret)
+ goto done;
+
+ mdelay(FSI_LINK_ENABLE_SETUP_TIME);
+done:
+ mutex_unlock(&aspeed->lock);
+ return ret;
+}
+
+static int aspeed_master_term(struct fsi_master *master, int link, uint8_t id)
+{
+ uint32_t addr;
+ __be32 cmd;
+
+ addr = 0x4;
+ cmd = cpu_to_be32(0xecc00000);
+
+ return aspeed_master_write(master, link, id, addr, &cmd, 4);
+}
+
+static int aspeed_master_break(struct fsi_master *master, int link)
+{
+ uint32_t addr;
+ __be32 cmd;
+
+ addr = 0x0;
+ cmd = cpu_to_be32(0xc0de0000);
+
+ return aspeed_master_write(master, link, 0, addr, &cmd, 4);
+}
+
+static void aspeed_master_release(struct device *dev)
+{
+ struct fsi_master_aspeed *aspeed =
+ to_fsi_master_aspeed(to_fsi_master(dev));
+
+ kfree(aspeed);
+}
+
+/* mmode encoders */
+static inline u32 fsi_mmode_crs0(u32 x)
+{
+ return (x & FSI_MMODE_CRS0MASK) << FSI_MMODE_CRS0SHFT;
+}
+
+static inline u32 fsi_mmode_crs1(u32 x)
+{
+ return (x & FSI_MMODE_CRS1MASK) << FSI_MMODE_CRS1SHFT;
+}
+
+static int aspeed_master_init(struct fsi_master_aspeed *aspeed)
+{
+ __be32 reg;
+
+ reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
+ | FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
+ opb_writel(aspeed, ctrl_base + FSI_MRESP0, reg);
+
+ /* Initialize the MFSI (hub master) engine */
+ reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
+ | FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
+ opb_writel(aspeed, ctrl_base + FSI_MRESP0, reg);
+
+ reg = cpu_to_be32(FSI_MECTRL_EOAE | FSI_MECTRL_P8_AUTO_TERM);
+ opb_writel(aspeed, ctrl_base + FSI_MECTRL, reg);
+
+ reg = cpu_to_be32(FSI_MMODE_ECRC | FSI_MMODE_EPC | FSI_MMODE_RELA
+ | fsi_mmode_crs0(aspeed_fsi_divisor)
+ | fsi_mmode_crs1(aspeed_fsi_divisor)
+ | FSI_MMODE_P8_TO_LSB);
+ dev_info(aspeed->dev, "mmode set to %08x (divisor %d)\n",
+ be32_to_cpu(reg), aspeed_fsi_divisor);
+ opb_writel(aspeed, ctrl_base + FSI_MMODE, reg);
+
+ reg = cpu_to_be32(0xffff0000);
+ opb_writel(aspeed, ctrl_base + FSI_MDLYR, reg);
+
+ reg = cpu_to_be32(~0);
+ opb_writel(aspeed, ctrl_base + FSI_MSENP0, reg);
+
+ /* Leave enabled long enough for master logic to set up */
+ mdelay(FSI_LINK_ENABLE_SETUP_TIME);
+
+ opb_writel(aspeed, ctrl_base + FSI_MCENP0, reg);
+
+ opb_readl(aspeed, ctrl_base + FSI_MAEB, NULL);
+
+ reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK);
+ opb_writel(aspeed, ctrl_base + FSI_MRESP0, reg);
+
+ opb_readl(aspeed, ctrl_base + FSI_MLEVP0, NULL);
+
+ /* Reset the master bridge */
+ reg = cpu_to_be32(FSI_MRESB_RST_GEN);
+ opb_writel(aspeed, ctrl_base + FSI_MRESB0, reg);
+
+ reg = cpu_to_be32(FSI_MRESB_RST_ERR);
+ opb_writel(aspeed, ctrl_base + FSI_MRESB0, reg);
+
+ return 0;
+}
+
+static ssize_t cfam_reset_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct fsi_master_aspeed *aspeed = dev_get_drvdata(dev);
+
+ trace_fsi_master_aspeed_cfam_reset(true);
+ mutex_lock(&aspeed->lock);
+ gpiod_set_value(aspeed->cfam_reset_gpio, 1);
+ usleep_range(900, 1000);
+ gpiod_set_value(aspeed->cfam_reset_gpio, 0);
+ usleep_range(900, 1000);
+ opb_writel(aspeed, ctrl_base + FSI_MRESP0, cpu_to_be32(FSI_MRESP_RST_ALL_MASTER));
+ mutex_unlock(&aspeed->lock);
+ trace_fsi_master_aspeed_cfam_reset(false);
+
+ return count;
+}
+
+static DEVICE_ATTR(cfam_reset, 0200, NULL, cfam_reset_store);
+
+static int setup_cfam_reset(struct fsi_master_aspeed *aspeed)
+{
+ struct device *dev = aspeed->dev;
+ struct gpio_desc *gpio;
+ int rc;
+
+ gpio = devm_gpiod_get_optional(dev, "cfam-reset", GPIOD_OUT_LOW);
+ if (IS_ERR(gpio))
+ return PTR_ERR(gpio);
+ if (!gpio)
+ return 0;
+
+ aspeed->cfam_reset_gpio = gpio;
+
+ rc = device_create_file(dev, &dev_attr_cfam_reset);
+ if (rc) {
+ devm_gpiod_put(dev, gpio);
+ return rc;
+ }
+
+ return 0;
+}
+
+static int tacoma_cabled_fsi_fixup(struct device *dev)
+{
+ struct gpio_desc *routing_gpio, *mux_gpio;
+ int gpio;
+
+ /*
+ * The routing GPIO is a jumper indicating we should mux for the
+ * externally connected FSI cable.
+ */
+ routing_gpio = devm_gpiod_get_optional(dev, "fsi-routing",
+ GPIOD_IN | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
+ if (IS_ERR(routing_gpio))
+ return PTR_ERR(routing_gpio);
+ if (!routing_gpio)
+ return 0;
+
+ mux_gpio = devm_gpiod_get_optional(dev, "fsi-mux", GPIOD_ASIS);
+ if (IS_ERR(mux_gpio))
+ return PTR_ERR(mux_gpio);
+ if (!mux_gpio)
+ return 0;
+
+ gpio = gpiod_get_value(routing_gpio);
+ if (gpio < 0)
+ return gpio;
+
+ /* If the routing GPIO is high we should set the mux to low. */
+ if (gpio) {
+ /*
+ * Cable signal integrity means we should run the bus
+ * slightly slower. Do not override if a kernel param
+ * has already overridden.
+ */
+ if (aspeed_fsi_divisor == FSI_DIVISOR_DEFAULT)
+ aspeed_fsi_divisor = FSI_DIVISOR_CABLED;
+
+ gpiod_direction_output(mux_gpio, 0);
+ dev_info(dev, "FSI configured for external cable\n");
+ } else {
+ gpiod_direction_output(mux_gpio, 1);
+ }
+
+ devm_gpiod_put(dev, routing_gpio);
+
+ return 0;
+}
+
+static int fsi_master_aspeed_probe(struct platform_device *pdev)
+{
+ struct fsi_master_aspeed *aspeed;
+ int rc, links, reg;
+ __be32 raw;
+
+ rc = tacoma_cabled_fsi_fixup(&pdev->dev);
+ if (rc) {
+ dev_err(&pdev->dev, "Tacoma FSI cable fixup failed\n");
+ return rc;
+ }
+
+ aspeed = kzalloc(sizeof(*aspeed), GFP_KERNEL);
+ if (!aspeed)
+ return -ENOMEM;
+
+ aspeed->dev = &pdev->dev;
+
+ aspeed->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(aspeed->base)) {
+ rc = PTR_ERR(aspeed->base);
+ goto err_free_aspeed;
+ }
+
+ aspeed->clk = devm_clk_get(aspeed->dev, NULL);
+ if (IS_ERR(aspeed->clk)) {
+ dev_err(aspeed->dev, "couldn't get clock\n");
+ rc = PTR_ERR(aspeed->clk);
+ goto err_free_aspeed;
+ }
+ rc = clk_prepare_enable(aspeed->clk);
+ if (rc) {
+ dev_err(aspeed->dev, "couldn't enable clock\n");
+ goto err_free_aspeed;
+ }
+
+ rc = setup_cfam_reset(aspeed);
+ if (rc) {
+ dev_err(&pdev->dev, "CFAM reset GPIO setup failed\n");
+ }
+
+ writel(0x1, aspeed->base + OPB_CLK_SYNC);
+ writel(OPB1_XFER_ACK_EN | OPB0_XFER_ACK_EN,
+ aspeed->base + OPB_IRQ_MASK);
+
+ /* TODO: determine an appropriate value */
+ writel(0x10, aspeed->base + OPB_RETRY_COUNTER);
+
+ writel(ctrl_base, aspeed->base + OPB_CTRL_BASE);
+ writel(fsi_base, aspeed->base + OPB_FSI_BASE);
+
+ /* Set read data order */
+ writel(0x00030b1b, aspeed->base + OPB0_READ_ORDER1);
+
+ /* Set write data order */
+ writel(0x0011101b, aspeed->base + OPB0_WRITE_ORDER1);
+ writel(0x0c330f3f, aspeed->base + OPB0_WRITE_ORDER2);
+
+ /*
+ * Select OPB0 for all operations.
+ * Will need to be reworked when enabling DMA or anything that uses
+ * OPB1.
+ */
+ writel(0x1, aspeed->base + OPB0_SELECT);
+
+ rc = opb_readl(aspeed, ctrl_base + FSI_MVER, &raw);
+ if (rc) {
+ dev_err(&pdev->dev, "failed to read hub version\n");
+ goto err_release;
+ }
+
+ reg = be32_to_cpu(raw);
+ links = (reg >> 8) & 0xff;
+ dev_info(&pdev->dev, "hub version %08x (%d links)\n", reg, links);
+
+ aspeed->master.dev.parent = &pdev->dev;
+ aspeed->master.dev.release = aspeed_master_release;
+ aspeed->master.dev.of_node = of_node_get(dev_of_node(&pdev->dev));
+
+ aspeed->master.n_links = links;
+ aspeed->master.read = aspeed_master_read;
+ aspeed->master.write = aspeed_master_write;
+ aspeed->master.send_break = aspeed_master_break;
+ aspeed->master.term = aspeed_master_term;
+ aspeed->master.link_enable = aspeed_master_link_enable;
+
+ dev_set_drvdata(&pdev->dev, aspeed);
+
+ mutex_init(&aspeed->lock);
+ aspeed_master_init(aspeed);
+
+ rc = fsi_master_register(&aspeed->master);
+ if (rc)
+ goto err_release;
+
+ /* At this point, fsi_master_register performs the device_initialize(),
+ * and holds the sole reference on master.dev. This means the device
+ * will be freed (via ->release) during any subsequent call to
+ * fsi_master_unregister. We add our own reference to it here, so we
+ * can perform cleanup (in _remove()) without it being freed before
+ * we're ready.
+ */
+ get_device(&aspeed->master.dev);
+ return 0;
+
+err_release:
+ clk_disable_unprepare(aspeed->clk);
+err_free_aspeed:
+ kfree(aspeed);
+ return rc;
+}
+
+static int fsi_master_aspeed_remove(struct platform_device *pdev)
+{
+ struct fsi_master_aspeed *aspeed = platform_get_drvdata(pdev);
+
+ fsi_master_unregister(&aspeed->master);
+ clk_disable_unprepare(aspeed->clk);
+
+ return 0;
+}
+
+static const struct of_device_id fsi_master_aspeed_match[] = {
+ { .compatible = "aspeed,ast2600-fsi-master" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, fsi_master_aspeed_match);
+
+static struct platform_driver fsi_master_aspeed_driver = {
+ .driver = {
+ .name = "fsi-master-aspeed",
+ .of_match_table = fsi_master_aspeed_match,
+ },
+ .probe = fsi_master_aspeed_probe,
+ .remove = fsi_master_aspeed_remove,
+};
+
+module_platform_driver(fsi_master_aspeed_driver);
+MODULE_LICENSE("GPL");
diff --git a/drivers/fsi/fsi-master-ast-cf.c b/drivers/fsi/fsi-master-ast-cf.c
new file mode 100644
index 000000000..812dfa9a9
--- /dev/null
+++ b/drivers/fsi/fsi-master-ast-cf.c
@@ -0,0 +1,1444 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2018 IBM Corp
+/*
+ * A FSI master controller, using a simple GPIO bit-banging interface
+ */
+
+#include <linux/crc4.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/fsi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/io.h>
+#include <linux/irqflags.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/firmware.h>
+#include <linux/gpio/aspeed.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/genalloc.h>
+
+#include "fsi-master.h"
+#include "cf-fsi-fw.h"
+
+#define FW_FILE_NAME "cf-fsi-fw.bin"
+
+/* Common SCU based coprocessor control registers */
+#define SCU_COPRO_CTRL 0x100
+#define SCU_COPRO_RESET 0x00000002
+#define SCU_COPRO_CLK_EN 0x00000001
+
+/* AST2500 specific ones */
+#define SCU_2500_COPRO_SEG0 0x104
+#define SCU_2500_COPRO_SEG1 0x108
+#define SCU_2500_COPRO_SEG2 0x10c
+#define SCU_2500_COPRO_SEG3 0x110
+#define SCU_2500_COPRO_SEG4 0x114
+#define SCU_2500_COPRO_SEG5 0x118
+#define SCU_2500_COPRO_SEG6 0x11c
+#define SCU_2500_COPRO_SEG7 0x120
+#define SCU_2500_COPRO_SEG8 0x124
+#define SCU_2500_COPRO_SEG_SWAP 0x00000001
+#define SCU_2500_COPRO_CACHE_CTL 0x128
+#define SCU_2500_COPRO_CACHE_EN 0x00000001
+#define SCU_2500_COPRO_SEG0_CACHE_EN 0x00000002
+#define SCU_2500_COPRO_SEG1_CACHE_EN 0x00000004
+#define SCU_2500_COPRO_SEG2_CACHE_EN 0x00000008
+#define SCU_2500_COPRO_SEG3_CACHE_EN 0x00000010
+#define SCU_2500_COPRO_SEG4_CACHE_EN 0x00000020
+#define SCU_2500_COPRO_SEG5_CACHE_EN 0x00000040
+#define SCU_2500_COPRO_SEG6_CACHE_EN 0x00000080
+#define SCU_2500_COPRO_SEG7_CACHE_EN 0x00000100
+#define SCU_2500_COPRO_SEG8_CACHE_EN 0x00000200
+
+#define SCU_2400_COPRO_SEG0 0x104
+#define SCU_2400_COPRO_SEG2 0x108
+#define SCU_2400_COPRO_SEG4 0x10c
+#define SCU_2400_COPRO_SEG6 0x110
+#define SCU_2400_COPRO_SEG8 0x114
+#define SCU_2400_COPRO_SEG_SWAP 0x80000000
+#define SCU_2400_COPRO_CACHE_CTL 0x118
+#define SCU_2400_COPRO_CACHE_EN 0x00000001
+#define SCU_2400_COPRO_SEG0_CACHE_EN 0x00000002
+#define SCU_2400_COPRO_SEG2_CACHE_EN 0x00000004
+#define SCU_2400_COPRO_SEG4_CACHE_EN 0x00000008
+#define SCU_2400_COPRO_SEG6_CACHE_EN 0x00000010
+#define SCU_2400_COPRO_SEG8_CACHE_EN 0x00000020
+
+/* CVIC registers */
+#define CVIC_EN_REG 0x10
+#define CVIC_TRIG_REG 0x18
+
+/*
+ * System register base address (needed for configuring the
+ * coldfire maps)
+ */
+#define SYSREG_BASE 0x1e600000
+
+/* Amount of SRAM required */
+#define SRAM_SIZE 0x1000
+
+#define LAST_ADDR_INVALID 0x1
+
+struct fsi_master_acf {
+ struct fsi_master master;
+ struct device *dev;
+ struct regmap *scu;
+ struct mutex lock; /* mutex for command ordering */
+ struct gpio_desc *gpio_clk;
+ struct gpio_desc *gpio_data;
+ struct gpio_desc *gpio_trans; /* Voltage translator */
+ struct gpio_desc *gpio_enable; /* FSI enable */
+ struct gpio_desc *gpio_mux; /* Mux control */
+ uint16_t gpio_clk_vreg;
+ uint16_t gpio_clk_dreg;
+ uint16_t gpio_dat_vreg;
+ uint16_t gpio_dat_dreg;
+ uint16_t gpio_tra_vreg;
+ uint16_t gpio_tra_dreg;
+ uint8_t gpio_clk_bit;
+ uint8_t gpio_dat_bit;
+ uint8_t gpio_tra_bit;
+ uint32_t cf_mem_addr;
+ size_t cf_mem_size;
+ void __iomem *cf_mem;
+ void __iomem *cvic;
+ struct gen_pool *sram_pool;
+ void __iomem *sram;
+ bool is_ast2500;
+ bool external_mode;
+ bool trace_enabled;
+ uint32_t last_addr;
+ uint8_t t_send_delay;
+ uint8_t t_echo_delay;
+ uint32_t cvic_sw_irq;
+};
+#define to_fsi_master_acf(m) container_of(m, struct fsi_master_acf, master)
+
+struct fsi_msg {
+ uint64_t msg;
+ uint8_t bits;
+};
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/fsi_master_ast_cf.h>
+
+static void msg_push_bits(struct fsi_msg *msg, uint64_t data, int bits)
+{
+ msg->msg <<= bits;
+ msg->msg |= data & ((1ull << bits) - 1);
+ msg->bits += bits;
+}
+
+static void msg_push_crc(struct fsi_msg *msg)
+{
+ uint8_t crc;
+ int top;
+
+ top = msg->bits & 0x3;
+
+ /* start bit, and any non-aligned top bits */
+ crc = crc4(0, 1 << top | msg->msg >> (msg->bits - top), top + 1);
+
+ /* aligned bits */
+ crc = crc4(crc, msg->msg, msg->bits - top);
+
+ msg_push_bits(msg, crc, 4);
+}
+
+static void msg_finish_cmd(struct fsi_msg *cmd)
+{
+ /* Left align message */
+ cmd->msg <<= (64 - cmd->bits);
+}
+
+static bool check_same_address(struct fsi_master_acf *master, int id,
+ uint32_t addr)
+{
+ /* this will also handle LAST_ADDR_INVALID */
+ return master->last_addr == (((id & 0x3) << 21) | (addr & ~0x3));
+}
+
+static bool check_relative_address(struct fsi_master_acf *master, int id,
+ uint32_t addr, uint32_t *rel_addrp)
+{
+ uint32_t last_addr = master->last_addr;
+ int32_t rel_addr;
+
+ if (last_addr == LAST_ADDR_INVALID)
+ return false;
+
+ /* We may be in 23-bit addressing mode, which uses the id as the
+ * top two address bits. So, if we're referencing a different ID,
+ * use absolute addresses.
+ */
+ if (((last_addr >> 21) & 0x3) != id)
+ return false;
+
+ /* remove the top two bits from any 23-bit addressing */
+ last_addr &= (1 << 21) - 1;
+
+ /* We know that the addresses are limited to 21 bits, so this won't
+ * overflow the signed rel_addr */
+ rel_addr = addr - last_addr;
+ if (rel_addr > 255 || rel_addr < -256)
+ return false;
+
+ *rel_addrp = (uint32_t)rel_addr;
+
+ return true;
+}
+
+static void last_address_update(struct fsi_master_acf *master,
+ int id, bool valid, uint32_t addr)
+{
+ if (!valid)
+ master->last_addr = LAST_ADDR_INVALID;
+ else
+ master->last_addr = ((id & 0x3) << 21) | (addr & ~0x3);
+}
+
+/*
+ * Encode an Absolute/Relative/Same Address command
+ */
+static void build_ar_command(struct fsi_master_acf *master,
+ struct fsi_msg *cmd, uint8_t id,
+ uint32_t addr, size_t size,
+ const void *data)
+{
+ int i, addr_bits, opcode_bits;
+ bool write = !!data;
+ uint8_t ds, opcode;
+ uint32_t rel_addr;
+
+ cmd->bits = 0;
+ cmd->msg = 0;
+
+ /* we have 21 bits of address max */
+ addr &= ((1 << 21) - 1);
+
+ /* cmd opcodes are variable length - SAME_AR is only two bits */
+ opcode_bits = 3;
+
+ if (check_same_address(master, id, addr)) {
+ /* we still address the byte offset within the word */
+ addr_bits = 2;
+ opcode_bits = 2;
+ opcode = FSI_CMD_SAME_AR;
+ trace_fsi_master_acf_cmd_same_addr(master);
+
+ } else if (check_relative_address(master, id, addr, &rel_addr)) {
+ /* 8 bits plus sign */
+ addr_bits = 9;
+ addr = rel_addr;
+ opcode = FSI_CMD_REL_AR;
+ trace_fsi_master_acf_cmd_rel_addr(master, rel_addr);
+
+ } else {
+ addr_bits = 21;
+ opcode = FSI_CMD_ABS_AR;
+ trace_fsi_master_acf_cmd_abs_addr(master, addr);
+ }
+
+ /*
+ * The read/write size is encoded in the lower bits of the address
+ * (as it must be naturally-aligned), and the following ds bit.
+ *
+ * size addr:1 addr:0 ds
+ * 1 x x 0
+ * 2 x 0 1
+ * 4 0 1 1
+ *
+ */
+ ds = size > 1 ? 1 : 0;
+ addr &= ~(size - 1);
+ if (size == 4)
+ addr |= 1;
+
+ msg_push_bits(cmd, id, 2);
+ msg_push_bits(cmd, opcode, opcode_bits);
+ msg_push_bits(cmd, write ? 0 : 1, 1);
+ msg_push_bits(cmd, addr, addr_bits);
+ msg_push_bits(cmd, ds, 1);
+ for (i = 0; write && i < size; i++)
+ msg_push_bits(cmd, ((uint8_t *)data)[i], 8);
+
+ msg_push_crc(cmd);
+ msg_finish_cmd(cmd);
+}
+
+static void build_dpoll_command(struct fsi_msg *cmd, uint8_t slave_id)
+{
+ cmd->bits = 0;
+ cmd->msg = 0;
+
+ msg_push_bits(cmd, slave_id, 2);
+ msg_push_bits(cmd, FSI_CMD_DPOLL, 3);
+ msg_push_crc(cmd);
+ msg_finish_cmd(cmd);
+}
+
+static void build_epoll_command(struct fsi_msg *cmd, uint8_t slave_id)
+{
+ cmd->bits = 0;
+ cmd->msg = 0;
+
+ msg_push_bits(cmd, slave_id, 2);
+ msg_push_bits(cmd, FSI_CMD_EPOLL, 3);
+ msg_push_crc(cmd);
+ msg_finish_cmd(cmd);
+}
+
+static void build_term_command(struct fsi_msg *cmd, uint8_t slave_id)
+{
+ cmd->bits = 0;
+ cmd->msg = 0;
+
+ msg_push_bits(cmd, slave_id, 2);
+ msg_push_bits(cmd, FSI_CMD_TERM, 6);
+ msg_push_crc(cmd);
+ msg_finish_cmd(cmd);
+}
+
+static int do_copro_command(struct fsi_master_acf *master, uint32_t op)
+{
+ uint32_t timeout = 10000000;
+ uint8_t stat;
+
+ trace_fsi_master_acf_copro_command(master, op);
+
+ /* Send command */
+ iowrite32be(op, master->sram + CMD_STAT_REG);
+
+ /* Ring doorbell if any */
+ if (master->cvic)
+ iowrite32(0x2, master->cvic + CVIC_TRIG_REG);
+
+ /* Wait for status to indicate completion (or error) */
+ do {
+ if (timeout-- == 0) {
+ dev_warn(master->dev,
+ "Timeout waiting for coprocessor completion\n");
+ return -ETIMEDOUT;
+ }
+ stat = ioread8(master->sram + CMD_STAT_REG);
+ } while(stat < STAT_COMPLETE || stat == 0xff);
+
+ if (stat == STAT_COMPLETE)
+ return 0;
+ switch(stat) {
+ case STAT_ERR_INVAL_CMD:
+ return -EINVAL;
+ case STAT_ERR_INVAL_IRQ:
+ return -EIO;
+ case STAT_ERR_MTOE:
+ return -ESHUTDOWN;
+ }
+ return -ENXIO;
+}
+
+static int clock_zeros(struct fsi_master_acf *master, int count)
+{
+ while (count) {
+ int rc, lcnt = min(count, 255);
+
+ rc = do_copro_command(master,
+ CMD_IDLE_CLOCKS | (lcnt << CMD_REG_CLEN_SHIFT));
+ if (rc)
+ return rc;
+ count -= lcnt;
+ }
+ return 0;
+}
+
+static int send_request(struct fsi_master_acf *master, struct fsi_msg *cmd,
+ unsigned int resp_bits)
+{
+ uint32_t op;
+
+ trace_fsi_master_acf_send_request(master, cmd, resp_bits);
+
+ /* Store message into SRAM */
+ iowrite32be((cmd->msg >> 32), master->sram + CMD_DATA);
+ iowrite32be((cmd->msg & 0xffffffff), master->sram + CMD_DATA + 4);
+
+ op = CMD_COMMAND;
+ op |= cmd->bits << CMD_REG_CLEN_SHIFT;
+ if (resp_bits)
+ op |= resp_bits << CMD_REG_RLEN_SHIFT;
+
+ return do_copro_command(master, op);
+}
+
+static int read_copro_response(struct fsi_master_acf *master, uint8_t size,
+ uint32_t *response, u8 *tag)
+{
+ uint8_t rtag = ioread8(master->sram + STAT_RTAG) & 0xf;
+ uint8_t rcrc = ioread8(master->sram + STAT_RCRC) & 0xf;
+ uint32_t rdata = 0;
+ uint32_t crc;
+ uint8_t ack;
+
+ *tag = ack = rtag & 3;
+
+ /* we have a whole message now; check CRC */
+ crc = crc4(0, 1, 1);
+ crc = crc4(crc, rtag, 4);
+ if (ack == FSI_RESP_ACK && size) {
+ rdata = ioread32be(master->sram + RSP_DATA);
+ crc = crc4(crc, rdata, size);
+ if (response)
+ *response = rdata;
+ }
+ crc = crc4(crc, rcrc, 4);
+
+ trace_fsi_master_acf_copro_response(master, rtag, rcrc, rdata, crc == 0);
+
+ if (crc) {
+ /*
+ * Check if it's all 1's or all 0's, that probably means
+ * the host is off
+ */
+ if ((rtag == 0xf && rcrc == 0xf) || (rtag == 0 && rcrc == 0))
+ return -ENODEV;
+ dev_dbg(master->dev, "Bad response CRC !\n");
+ return -EAGAIN;
+ }
+ return 0;
+}
+
+static int send_term(struct fsi_master_acf *master, uint8_t slave)
+{
+ struct fsi_msg cmd;
+ uint8_t tag;
+ int rc;
+
+ build_term_command(&cmd, slave);
+
+ rc = send_request(master, &cmd, 0);
+ if (rc) {
+ dev_warn(master->dev, "Error %d sending term\n", rc);
+ return rc;
+ }
+
+ rc = read_copro_response(master, 0, NULL, &tag);
+ if (rc < 0) {
+ dev_err(master->dev,
+ "TERM failed; lost communication with slave\n");
+ return -EIO;
+ } else if (tag != FSI_RESP_ACK) {
+ dev_err(master->dev, "TERM failed; response %d\n", tag);
+ return -EIO;
+ }
+ return 0;
+}
+
+static void dump_ucode_trace(struct fsi_master_acf *master)
+{
+ char trbuf[52];
+ char *p;
+ int i;
+
+ dev_dbg(master->dev,
+ "CMDSTAT:%08x RTAG=%02x RCRC=%02x RDATA=%02x #INT=%08x\n",
+ ioread32be(master->sram + CMD_STAT_REG),
+ ioread8(master->sram + STAT_RTAG),
+ ioread8(master->sram + STAT_RCRC),
+ ioread32be(master->sram + RSP_DATA),
+ ioread32be(master->sram + INT_CNT));
+
+ for (i = 0; i < 512; i++) {
+ uint8_t v;
+ if ((i % 16) == 0)
+ p = trbuf;
+ v = ioread8(master->sram + TRACEBUF + i);
+ p += sprintf(p, "%02x ", v);
+ if (((i % 16) == 15) || v == TR_END)
+ dev_dbg(master->dev, "%s\n", trbuf);
+ if (v == TR_END)
+ break;
+ }
+}
+
+static int handle_response(struct fsi_master_acf *master,
+ uint8_t slave, uint8_t size, void *data)
+{
+ int busy_count = 0, rc;
+ int crc_err_retries = 0;
+ struct fsi_msg cmd;
+ uint32_t response;
+ uint8_t tag;
+retry:
+ rc = read_copro_response(master, size, &response, &tag);
+
+ /* Handle retries on CRC errors */
+ if (rc == -EAGAIN) {
+ /* Too many retries ? */
+ if (crc_err_retries++ > FSI_CRC_ERR_RETRIES) {
+ /*
+ * Pass it up as a -EIO otherwise upper level will retry
+ * the whole command which isn't what we want here.
+ */
+ rc = -EIO;
+ goto bail;
+ }
+ trace_fsi_master_acf_crc_rsp_error(master, crc_err_retries);
+ if (master->trace_enabled)
+ dump_ucode_trace(master);
+ rc = clock_zeros(master, FSI_MASTER_EPOLL_CLOCKS);
+ if (rc) {
+ dev_warn(master->dev,
+ "Error %d clocking zeros for E_POLL\n", rc);
+ return rc;
+ }
+ build_epoll_command(&cmd, slave);
+ rc = send_request(master, &cmd, size);
+ if (rc) {
+ dev_warn(master->dev, "Error %d sending E_POLL\n", rc);
+ return -EIO;
+ }
+ goto retry;
+ }
+ if (rc)
+ return rc;
+
+ switch (tag) {
+ case FSI_RESP_ACK:
+ if (size && data) {
+ if (size == 32)
+ *(__be32 *)data = cpu_to_be32(response);
+ else if (size == 16)
+ *(__be16 *)data = cpu_to_be16(response);
+ else
+ *(u8 *)data = response;
+ }
+ break;
+ case FSI_RESP_BUSY:
+ /*
+ * Its necessary to clock slave before issuing
+ * d-poll, not indicated in the hardware protocol
+ * spec. < 20 clocks causes slave to hang, 21 ok.
+ */
+ dev_dbg(master->dev, "Busy, retrying...\n");
+ if (master->trace_enabled)
+ dump_ucode_trace(master);
+ rc = clock_zeros(master, FSI_MASTER_DPOLL_CLOCKS);
+ if (rc) {
+ dev_warn(master->dev,
+ "Error %d clocking zeros for D_POLL\n", rc);
+ break;
+ }
+ if (busy_count++ < FSI_MASTER_MAX_BUSY) {
+ build_dpoll_command(&cmd, slave);
+ rc = send_request(master, &cmd, size);
+ if (rc) {
+ dev_warn(master->dev, "Error %d sending D_POLL\n", rc);
+ break;
+ }
+ goto retry;
+ }
+ dev_dbg(master->dev,
+ "ERR slave is stuck in busy state, issuing TERM\n");
+ send_term(master, slave);
+ rc = -EIO;
+ break;
+
+ case FSI_RESP_ERRA:
+ dev_dbg(master->dev, "ERRA received\n");
+ if (master->trace_enabled)
+ dump_ucode_trace(master);
+ rc = -EIO;
+ break;
+ case FSI_RESP_ERRC:
+ dev_dbg(master->dev, "ERRC received\n");
+ if (master->trace_enabled)
+ dump_ucode_trace(master);
+ rc = -EAGAIN;
+ break;
+ }
+ bail:
+ if (busy_count > 0) {
+ trace_fsi_master_acf_poll_response_busy(master, busy_count);
+ }
+
+ return rc;
+}
+
+static int fsi_master_acf_xfer(struct fsi_master_acf *master, uint8_t slave,
+ struct fsi_msg *cmd, size_t resp_len, void *resp)
+{
+ int rc = -EAGAIN, retries = 0;
+
+ resp_len <<= 3;
+ while ((retries++) < FSI_CRC_ERR_RETRIES) {
+ rc = send_request(master, cmd, resp_len);
+ if (rc) {
+ if (rc != -ESHUTDOWN)
+ dev_warn(master->dev, "Error %d sending command\n", rc);
+ break;
+ }
+ rc = handle_response(master, slave, resp_len, resp);
+ if (rc != -EAGAIN)
+ break;
+ rc = -EIO;
+ dev_dbg(master->dev, "ECRC retry %d\n", retries);
+
+ /* Pace it a bit before retry */
+ msleep(1);
+ }
+
+ return rc;
+}
+
+static int fsi_master_acf_read(struct fsi_master *_master, int link,
+ uint8_t id, uint32_t addr, void *val,
+ size_t size)
+{
+ struct fsi_master_acf *master = to_fsi_master_acf(_master);
+ struct fsi_msg cmd;
+ int rc;
+
+ if (link != 0)
+ return -ENODEV;
+
+ mutex_lock(&master->lock);
+ dev_dbg(master->dev, "read id %d addr %x size %zd\n", id, addr, size);
+ build_ar_command(master, &cmd, id, addr, size, NULL);
+ rc = fsi_master_acf_xfer(master, id, &cmd, size, val);
+ last_address_update(master, id, rc == 0, addr);
+ if (rc)
+ dev_dbg(master->dev, "read id %d addr 0x%08x err: %d\n",
+ id, addr, rc);
+ mutex_unlock(&master->lock);
+
+ return rc;
+}
+
+static int fsi_master_acf_write(struct fsi_master *_master, int link,
+ uint8_t id, uint32_t addr, const void *val,
+ size_t size)
+{
+ struct fsi_master_acf *master = to_fsi_master_acf(_master);
+ struct fsi_msg cmd;
+ int rc;
+
+ if (link != 0)
+ return -ENODEV;
+
+ mutex_lock(&master->lock);
+ build_ar_command(master, &cmd, id, addr, size, val);
+ dev_dbg(master->dev, "write id %d addr %x size %zd raw_data: %08x\n",
+ id, addr, size, *(uint32_t *)val);
+ rc = fsi_master_acf_xfer(master, id, &cmd, 0, NULL);
+ last_address_update(master, id, rc == 0, addr);
+ if (rc)
+ dev_dbg(master->dev, "write id %d addr 0x%08x err: %d\n",
+ id, addr, rc);
+ mutex_unlock(&master->lock);
+
+ return rc;
+}
+
+static int fsi_master_acf_term(struct fsi_master *_master,
+ int link, uint8_t id)
+{
+ struct fsi_master_acf *master = to_fsi_master_acf(_master);
+ struct fsi_msg cmd;
+ int rc;
+
+ if (link != 0)
+ return -ENODEV;
+
+ mutex_lock(&master->lock);
+ build_term_command(&cmd, id);
+ dev_dbg(master->dev, "term id %d\n", id);
+ rc = fsi_master_acf_xfer(master, id, &cmd, 0, NULL);
+ last_address_update(master, id, false, 0);
+ mutex_unlock(&master->lock);
+
+ return rc;
+}
+
+static int fsi_master_acf_break(struct fsi_master *_master, int link)
+{
+ struct fsi_master_acf *master = to_fsi_master_acf(_master);
+ int rc;
+
+ if (link != 0)
+ return -ENODEV;
+
+ mutex_lock(&master->lock);
+ if (master->external_mode) {
+ mutex_unlock(&master->lock);
+ return -EBUSY;
+ }
+ dev_dbg(master->dev, "sending BREAK\n");
+ rc = do_copro_command(master, CMD_BREAK);
+ last_address_update(master, 0, false, 0);
+ mutex_unlock(&master->lock);
+
+ /* Wait for logic reset to take effect */
+ udelay(200);
+
+ return rc;
+}
+
+static void reset_cf(struct fsi_master_acf *master)
+{
+ regmap_write(master->scu, SCU_COPRO_CTRL, SCU_COPRO_RESET);
+ usleep_range(20,20);
+ regmap_write(master->scu, SCU_COPRO_CTRL, 0);
+ usleep_range(20,20);
+}
+
+static void start_cf(struct fsi_master_acf *master)
+{
+ regmap_write(master->scu, SCU_COPRO_CTRL, SCU_COPRO_CLK_EN);
+}
+
+static void setup_ast2500_cf_maps(struct fsi_master_acf *master)
+{
+ /*
+ * Note about byteswap setting: the bus is wired backwards,
+ * so setting the byteswap bit actually makes the ColdFire
+ * work "normally" for a BE processor, ie, put the MSB in
+ * the lowest address byte.
+ *
+ * We thus need to set the bit for our main memory which
+ * contains our program code. We create two mappings for
+ * the register, one with each setting.
+ *
+ * Segments 2 and 3 has a "swapped" mapping (BE)
+ * and 6 and 7 have a non-swapped mapping (LE) which allows
+ * us to avoid byteswapping register accesses since the
+ * registers are all LE.
+ */
+
+ /* Setup segment 0 to our memory region */
+ regmap_write(master->scu, SCU_2500_COPRO_SEG0, master->cf_mem_addr |
+ SCU_2500_COPRO_SEG_SWAP);
+
+ /* Segments 2 and 3 to sysregs with byteswap (for SRAM) */
+ regmap_write(master->scu, SCU_2500_COPRO_SEG2, SYSREG_BASE |
+ SCU_2500_COPRO_SEG_SWAP);
+ regmap_write(master->scu, SCU_2500_COPRO_SEG3, SYSREG_BASE | 0x100000 |
+ SCU_2500_COPRO_SEG_SWAP);
+
+ /* And segment 6 and 7 to sysregs no byteswap */
+ regmap_write(master->scu, SCU_2500_COPRO_SEG6, SYSREG_BASE);
+ regmap_write(master->scu, SCU_2500_COPRO_SEG7, SYSREG_BASE | 0x100000);
+
+ /* Memory cachable, regs and SRAM not cachable */
+ regmap_write(master->scu, SCU_2500_COPRO_CACHE_CTL,
+ SCU_2500_COPRO_SEG0_CACHE_EN | SCU_2500_COPRO_CACHE_EN);
+}
+
+static void setup_ast2400_cf_maps(struct fsi_master_acf *master)
+{
+ /* Setup segment 0 to our memory region */
+ regmap_write(master->scu, SCU_2400_COPRO_SEG0, master->cf_mem_addr |
+ SCU_2400_COPRO_SEG_SWAP);
+
+ /* Segments 2 to sysregs with byteswap (for SRAM) */
+ regmap_write(master->scu, SCU_2400_COPRO_SEG2, SYSREG_BASE |
+ SCU_2400_COPRO_SEG_SWAP);
+
+ /* And segment 6 to sysregs no byteswap */
+ regmap_write(master->scu, SCU_2400_COPRO_SEG6, SYSREG_BASE);
+
+ /* Memory cachable, regs and SRAM not cachable */
+ regmap_write(master->scu, SCU_2400_COPRO_CACHE_CTL,
+ SCU_2400_COPRO_SEG0_CACHE_EN | SCU_2400_COPRO_CACHE_EN);
+}
+
+static void setup_common_fw_config(struct fsi_master_acf *master,
+ void __iomem *base)
+{
+ iowrite16be(master->gpio_clk_vreg, base + HDR_CLOCK_GPIO_VADDR);
+ iowrite16be(master->gpio_clk_dreg, base + HDR_CLOCK_GPIO_DADDR);
+ iowrite16be(master->gpio_dat_vreg, base + HDR_DATA_GPIO_VADDR);
+ iowrite16be(master->gpio_dat_dreg, base + HDR_DATA_GPIO_DADDR);
+ iowrite16be(master->gpio_tra_vreg, base + HDR_TRANS_GPIO_VADDR);
+ iowrite16be(master->gpio_tra_dreg, base + HDR_TRANS_GPIO_DADDR);
+ iowrite8(master->gpio_clk_bit, base + HDR_CLOCK_GPIO_BIT);
+ iowrite8(master->gpio_dat_bit, base + HDR_DATA_GPIO_BIT);
+ iowrite8(master->gpio_tra_bit, base + HDR_TRANS_GPIO_BIT);
+}
+
+static void setup_ast2500_fw_config(struct fsi_master_acf *master)
+{
+ void __iomem *base = master->cf_mem + HDR_OFFSET;
+
+ setup_common_fw_config(master, base);
+ iowrite32be(FW_CONTROL_USE_STOP, base + HDR_FW_CONTROL);
+}
+
+static void setup_ast2400_fw_config(struct fsi_master_acf *master)
+{
+ void __iomem *base = master->cf_mem + HDR_OFFSET;
+
+ setup_common_fw_config(master, base);
+ iowrite32be(FW_CONTROL_CONT_CLOCK|FW_CONTROL_DUMMY_RD, base + HDR_FW_CONTROL);
+}
+
+static int setup_gpios_for_copro(struct fsi_master_acf *master)
+{
+
+ int rc;
+
+ /* This aren't under ColdFire control, just set them up appropriately */
+ gpiod_direction_output(master->gpio_mux, 1);
+ gpiod_direction_output(master->gpio_enable, 1);
+
+ /* Those are under ColdFire control, let it configure them */
+ rc = aspeed_gpio_copro_grab_gpio(master->gpio_clk, &master->gpio_clk_vreg,
+ &master->gpio_clk_dreg, &master->gpio_clk_bit);
+ if (rc) {
+ dev_err(master->dev, "failed to assign clock gpio to coprocessor\n");
+ return rc;
+ }
+ rc = aspeed_gpio_copro_grab_gpio(master->gpio_data, &master->gpio_dat_vreg,
+ &master->gpio_dat_dreg, &master->gpio_dat_bit);
+ if (rc) {
+ dev_err(master->dev, "failed to assign data gpio to coprocessor\n");
+ aspeed_gpio_copro_release_gpio(master->gpio_clk);
+ return rc;
+ }
+ rc = aspeed_gpio_copro_grab_gpio(master->gpio_trans, &master->gpio_tra_vreg,
+ &master->gpio_tra_dreg, &master->gpio_tra_bit);
+ if (rc) {
+ dev_err(master->dev, "failed to assign trans gpio to coprocessor\n");
+ aspeed_gpio_copro_release_gpio(master->gpio_clk);
+ aspeed_gpio_copro_release_gpio(master->gpio_data);
+ return rc;
+ }
+ return 0;
+}
+
+static void release_copro_gpios(struct fsi_master_acf *master)
+{
+ aspeed_gpio_copro_release_gpio(master->gpio_clk);
+ aspeed_gpio_copro_release_gpio(master->gpio_data);
+ aspeed_gpio_copro_release_gpio(master->gpio_trans);
+}
+
+static int load_copro_firmware(struct fsi_master_acf *master)
+{
+ const struct firmware *fw;
+ uint16_t sig = 0, wanted_sig;
+ const u8 *data;
+ size_t size = 0;
+ int rc;
+
+ /* Get the binary */
+ rc = request_firmware(&fw, FW_FILE_NAME, master->dev);
+ if (rc) {
+ dev_err(
+ master->dev, "Error %d to load firmware '%s' !\n",
+ rc, FW_FILE_NAME);
+ return rc;
+ }
+
+ /* Which image do we want ? (shared vs. split clock/data GPIOs) */
+ if (master->gpio_clk_vreg == master->gpio_dat_vreg)
+ wanted_sig = SYS_SIG_SHARED;
+ else
+ wanted_sig = SYS_SIG_SPLIT;
+ dev_dbg(master->dev, "Looking for image sig %04x\n", wanted_sig);
+
+ /* Try to find it */
+ for (data = fw->data; data < (fw->data + fw->size);) {
+ sig = be16_to_cpup((__be16 *)(data + HDR_OFFSET + HDR_SYS_SIG));
+ size = be32_to_cpup((__be32 *)(data + HDR_OFFSET + HDR_FW_SIZE));
+ if (sig == wanted_sig)
+ break;
+ data += size;
+ }
+ if (sig != wanted_sig) {
+ dev_err(master->dev, "Failed to locate image sig %04x in FW blob\n",
+ wanted_sig);
+ rc = -ENODEV;
+ goto release_fw;
+ }
+ if (size > master->cf_mem_size) {
+ dev_err(master->dev, "FW size (%zd) bigger than memory reserve (%zd)\n",
+ fw->size, master->cf_mem_size);
+ rc = -ENOMEM;
+ } else {
+ memcpy_toio(master->cf_mem, data, size);
+ }
+
+release_fw:
+ release_firmware(fw);
+ return rc;
+}
+
+static int check_firmware_image(struct fsi_master_acf *master)
+{
+ uint32_t fw_vers, fw_api, fw_options;
+
+ fw_vers = ioread16be(master->cf_mem + HDR_OFFSET + HDR_FW_VERS);
+ fw_api = ioread16be(master->cf_mem + HDR_OFFSET + HDR_API_VERS);
+ fw_options = ioread32be(master->cf_mem + HDR_OFFSET + HDR_FW_OPTIONS);
+ master->trace_enabled = !!(fw_options & FW_OPTION_TRACE_EN);
+
+ /* Check version and signature */
+ dev_info(master->dev, "ColdFire initialized, firmware v%d API v%d.%d (trace %s)\n",
+ fw_vers, fw_api >> 8, fw_api & 0xff,
+ master->trace_enabled ? "enabled" : "disabled");
+
+ if ((fw_api >> 8) != API_VERSION_MAJ) {
+ dev_err(master->dev, "Unsupported coprocessor API version !\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int copro_enable_sw_irq(struct fsi_master_acf *master)
+{
+ int timeout;
+ uint32_t val;
+
+ /*
+ * Enable coprocessor interrupt input. I've had problems getting the
+ * value to stick, so try in a loop
+ */
+ for (timeout = 0; timeout < 10; timeout++) {
+ iowrite32(0x2, master->cvic + CVIC_EN_REG);
+ val = ioread32(master->cvic + CVIC_EN_REG);
+ if (val & 2)
+ break;
+ msleep(1);
+ }
+ if (!(val & 2)) {
+ dev_err(master->dev, "Failed to enable coprocessor interrupt !\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static int fsi_master_acf_setup(struct fsi_master_acf *master)
+{
+ int timeout, rc;
+ uint32_t val;
+
+ /* Make sure the ColdFire is stopped */
+ reset_cf(master);
+
+ /*
+ * Clear SRAM. This needs to happen before we setup the GPIOs
+ * as we might start trying to arbitrate as soon as that happens.
+ */
+ memset_io(master->sram, 0, SRAM_SIZE);
+
+ /* Configure GPIOs */
+ rc = setup_gpios_for_copro(master);
+ if (rc)
+ return rc;
+
+ /* Load the firmware into the reserved memory */
+ rc = load_copro_firmware(master);
+ if (rc)
+ return rc;
+
+ /* Read signature and check versions */
+ rc = check_firmware_image(master);
+ if (rc)
+ return rc;
+
+ /* Setup coldfire memory map */
+ if (master->is_ast2500) {
+ setup_ast2500_cf_maps(master);
+ setup_ast2500_fw_config(master);
+ } else {
+ setup_ast2400_cf_maps(master);
+ setup_ast2400_fw_config(master);
+ }
+
+ /* Start the ColdFire */
+ start_cf(master);
+
+ /* Wait for status register to indicate command completion
+ * which signals the initialization is complete
+ */
+ for (timeout = 0; timeout < 10; timeout++) {
+ val = ioread8(master->sram + CF_STARTED);
+ if (val)
+ break;
+ msleep(1);
+ }
+ if (!val) {
+ dev_err(master->dev, "Coprocessor startup timeout !\n");
+ rc = -ENODEV;
+ goto err;
+ }
+
+ /* Configure echo & send delay */
+ iowrite8(master->t_send_delay, master->sram + SEND_DLY_REG);
+ iowrite8(master->t_echo_delay, master->sram + ECHO_DLY_REG);
+
+ /* Enable SW interrupt to copro if any */
+ if (master->cvic) {
+ rc = copro_enable_sw_irq(master);
+ if (rc)
+ goto err;
+ }
+ return 0;
+ err:
+ /* An error occurred, don't leave the coprocessor running */
+ reset_cf(master);
+
+ /* Release the GPIOs */
+ release_copro_gpios(master);
+
+ return rc;
+}
+
+
+static void fsi_master_acf_terminate(struct fsi_master_acf *master)
+{
+ unsigned long flags;
+
+ /*
+ * A GPIO arbitration requestion could come in while this is
+ * happening. To avoid problems, we disable interrupts so it
+ * cannot preempt us on this CPU
+ */
+
+ local_irq_save(flags);
+
+ /* Stop the coprocessor */
+ reset_cf(master);
+
+ /* We mark the copro not-started */
+ iowrite32(0, master->sram + CF_STARTED);
+
+ /* We mark the ARB register as having given up arbitration to
+ * deal with a potential race with the arbitration request
+ */
+ iowrite8(ARB_ARM_ACK, master->sram + ARB_REG);
+
+ local_irq_restore(flags);
+
+ /* Return the GPIOs to the ARM */
+ release_copro_gpios(master);
+}
+
+static void fsi_master_acf_setup_external(struct fsi_master_acf *master)
+{
+ /* Setup GPIOs for external FSI master (FSP box) */
+ gpiod_direction_output(master->gpio_mux, 0);
+ gpiod_direction_output(master->gpio_trans, 0);
+ gpiod_direction_output(master->gpio_enable, 1);
+ gpiod_direction_input(master->gpio_clk);
+ gpiod_direction_input(master->gpio_data);
+}
+
+static int fsi_master_acf_link_enable(struct fsi_master *_master, int link,
+ bool enable)
+{
+ struct fsi_master_acf *master = to_fsi_master_acf(_master);
+ int rc = -EBUSY;
+
+ if (link != 0)
+ return -ENODEV;
+
+ mutex_lock(&master->lock);
+ if (!master->external_mode) {
+ gpiod_set_value(master->gpio_enable, enable ? 1 : 0);
+ rc = 0;
+ }
+ mutex_unlock(&master->lock);
+
+ return rc;
+}
+
+static int fsi_master_acf_link_config(struct fsi_master *_master, int link,
+ u8 t_send_delay, u8 t_echo_delay)
+{
+ struct fsi_master_acf *master = to_fsi_master_acf(_master);
+
+ if (link != 0)
+ return -ENODEV;
+
+ mutex_lock(&master->lock);
+ master->t_send_delay = t_send_delay;
+ master->t_echo_delay = t_echo_delay;
+ dev_dbg(master->dev, "Changing delays: send=%d echo=%d\n",
+ t_send_delay, t_echo_delay);
+ iowrite8(master->t_send_delay, master->sram + SEND_DLY_REG);
+ iowrite8(master->t_echo_delay, master->sram + ECHO_DLY_REG);
+ mutex_unlock(&master->lock);
+
+ return 0;
+}
+
+static ssize_t external_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fsi_master_acf *master = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE - 1, "%u\n",
+ master->external_mode ? 1 : 0);
+}
+
+static ssize_t external_mode_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct fsi_master_acf *master = dev_get_drvdata(dev);
+ unsigned long val;
+ bool external_mode;
+ int err;
+
+ err = kstrtoul(buf, 0, &val);
+ if (err)
+ return err;
+
+ external_mode = !!val;
+
+ mutex_lock(&master->lock);
+
+ if (external_mode == master->external_mode) {
+ mutex_unlock(&master->lock);
+ return count;
+ }
+
+ master->external_mode = external_mode;
+ if (master->external_mode) {
+ fsi_master_acf_terminate(master);
+ fsi_master_acf_setup_external(master);
+ } else
+ fsi_master_acf_setup(master);
+
+ mutex_unlock(&master->lock);
+
+ fsi_master_rescan(&master->master);
+
+ return count;
+}
+
+static DEVICE_ATTR(external_mode, 0664,
+ external_mode_show, external_mode_store);
+
+static int fsi_master_acf_gpio_request(void *data)
+{
+ struct fsi_master_acf *master = data;
+ int timeout;
+ u8 val;
+
+ /* Note: This doesn't require holding out mutex */
+
+ /* Write request */
+ iowrite8(ARB_ARM_REQ, master->sram + ARB_REG);
+
+ /*
+ * There is a race (which does happen at boot time) when we get an
+ * arbitration request as we are either about to or just starting
+ * the coprocessor.
+ *
+ * To handle it, we first check if we are running. If not yet we
+ * check whether the copro is started in the SCU.
+ *
+ * If it's not started, we can basically just assume we have arbitration
+ * and return. Otherwise, we wait normally expecting for the arbitration
+ * to eventually complete.
+ */
+ if (ioread32(master->sram + CF_STARTED) == 0) {
+ unsigned int reg = 0;
+
+ regmap_read(master->scu, SCU_COPRO_CTRL, &reg);
+ if (!(reg & SCU_COPRO_CLK_EN))
+ return 0;
+ }
+
+ /* Ring doorbell if any */
+ if (master->cvic)
+ iowrite32(0x2, master->cvic + CVIC_TRIG_REG);
+
+ for (timeout = 0; timeout < 10000; timeout++) {
+ val = ioread8(master->sram + ARB_REG);
+ if (val != ARB_ARM_REQ)
+ break;
+ udelay(1);
+ }
+
+ /* If it failed, override anyway */
+ if (val != ARB_ARM_ACK)
+ dev_warn(master->dev, "GPIO request arbitration timeout\n");
+
+ return 0;
+}
+
+static int fsi_master_acf_gpio_release(void *data)
+{
+ struct fsi_master_acf *master = data;
+
+ /* Write release */
+ iowrite8(0, master->sram + ARB_REG);
+
+ /* Ring doorbell if any */
+ if (master->cvic)
+ iowrite32(0x2, master->cvic + CVIC_TRIG_REG);
+
+ return 0;
+}
+
+static void fsi_master_acf_release(struct device *dev)
+{
+ struct fsi_master_acf *master = to_fsi_master_acf(to_fsi_master(dev));
+
+ /* Cleanup, stop coprocessor */
+ mutex_lock(&master->lock);
+ fsi_master_acf_terminate(master);
+ aspeed_gpio_copro_set_ops(NULL, NULL);
+ mutex_unlock(&master->lock);
+
+ /* Free resources */
+ gen_pool_free(master->sram_pool, (unsigned long)master->sram, SRAM_SIZE);
+ of_node_put(dev_of_node(master->dev));
+
+ kfree(master);
+}
+
+static const struct aspeed_gpio_copro_ops fsi_master_acf_gpio_ops = {
+ .request_access = fsi_master_acf_gpio_request,
+ .release_access = fsi_master_acf_gpio_release,
+};
+
+static int fsi_master_acf_probe(struct platform_device *pdev)
+{
+ struct device_node *np, *mnode = dev_of_node(&pdev->dev);
+ struct genpool_data_fixed gpdf;
+ struct fsi_master_acf *master;
+ struct gpio_desc *gpio;
+ struct resource res;
+ uint32_t cf_mem_align;
+ int rc;
+
+ master = kzalloc(sizeof(*master), GFP_KERNEL);
+ if (!master)
+ return -ENOMEM;
+
+ master->dev = &pdev->dev;
+ master->master.dev.parent = master->dev;
+ master->last_addr = LAST_ADDR_INVALID;
+
+ /* AST2400 vs. AST2500 */
+ master->is_ast2500 = of_device_is_compatible(mnode, "aspeed,ast2500-cf-fsi-master");
+
+ /* Grab the SCU, we'll need to access it to configure the coprocessor */
+ if (master->is_ast2500)
+ master->scu = syscon_regmap_lookup_by_compatible("aspeed,ast2500-scu");
+ else
+ master->scu = syscon_regmap_lookup_by_compatible("aspeed,ast2400-scu");
+ if (IS_ERR(master->scu)) {
+ dev_err(&pdev->dev, "failed to find SCU regmap\n");
+ rc = PTR_ERR(master->scu);
+ goto err_free;
+ }
+
+ /* Grab all the GPIOs we need */
+ gpio = devm_gpiod_get(&pdev->dev, "clock", 0);
+ if (IS_ERR(gpio)) {
+ dev_err(&pdev->dev, "failed to get clock gpio\n");
+ rc = PTR_ERR(gpio);
+ goto err_free;
+ }
+ master->gpio_clk = gpio;
+
+ gpio = devm_gpiod_get(&pdev->dev, "data", 0);
+ if (IS_ERR(gpio)) {
+ dev_err(&pdev->dev, "failed to get data gpio\n");
+ rc = PTR_ERR(gpio);
+ goto err_free;
+ }
+ master->gpio_data = gpio;
+
+ /* Optional GPIOs */
+ gpio = devm_gpiod_get_optional(&pdev->dev, "trans", 0);
+ if (IS_ERR(gpio)) {
+ dev_err(&pdev->dev, "failed to get trans gpio\n");
+ rc = PTR_ERR(gpio);
+ goto err_free;
+ }
+ master->gpio_trans = gpio;
+
+ gpio = devm_gpiod_get_optional(&pdev->dev, "enable", 0);
+ if (IS_ERR(gpio)) {
+ dev_err(&pdev->dev, "failed to get enable gpio\n");
+ rc = PTR_ERR(gpio);
+ goto err_free;
+ }
+ master->gpio_enable = gpio;
+
+ gpio = devm_gpiod_get_optional(&pdev->dev, "mux", 0);
+ if (IS_ERR(gpio)) {
+ dev_err(&pdev->dev, "failed to get mux gpio\n");
+ rc = PTR_ERR(gpio);
+ goto err_free;
+ }
+ master->gpio_mux = gpio;
+
+ /* Grab the reserved memory region (use DMA API instead ?) */
+ np = of_parse_phandle(mnode, "memory-region", 0);
+ if (!np) {
+ dev_err(&pdev->dev, "Didn't find reserved memory\n");
+ rc = -EINVAL;
+ goto err_free;
+ }
+ rc = of_address_to_resource(np, 0, &res);
+ of_node_put(np);
+ if (rc) {
+ dev_err(&pdev->dev, "Couldn't address to resource for reserved memory\n");
+ rc = -ENOMEM;
+ goto err_free;
+ }
+ master->cf_mem_size = resource_size(&res);
+ master->cf_mem_addr = (uint32_t)res.start;
+ cf_mem_align = master->is_ast2500 ? 0x00100000 : 0x00200000;
+ if (master->cf_mem_addr & (cf_mem_align - 1)) {
+ dev_err(&pdev->dev, "Reserved memory has insufficient alignment\n");
+ rc = -ENOMEM;
+ goto err_free;
+ }
+ master->cf_mem = devm_ioremap_resource(&pdev->dev, &res);
+ if (IS_ERR(master->cf_mem)) {
+ rc = PTR_ERR(master->cf_mem);
+ goto err_free;
+ }
+ dev_dbg(&pdev->dev, "DRAM allocation @%x\n", master->cf_mem_addr);
+
+ /* AST2500 has a SW interrupt to the coprocessor */
+ if (master->is_ast2500) {
+ /* Grab the CVIC (ColdFire interrupts controller) */
+ np = of_parse_phandle(mnode, "aspeed,cvic", 0);
+ if (!np) {
+ dev_err(&pdev->dev, "Didn't find CVIC\n");
+ rc = -EINVAL;
+ goto err_free;
+ }
+ master->cvic = devm_of_iomap(&pdev->dev, np, 0, NULL);
+ if (IS_ERR(master->cvic)) {
+ of_node_put(np);
+ rc = PTR_ERR(master->cvic);
+ dev_err(&pdev->dev, "Error %d mapping CVIC\n", rc);
+ goto err_free;
+ }
+ rc = of_property_read_u32(np, "copro-sw-interrupts",
+ &master->cvic_sw_irq);
+ of_node_put(np);
+ if (rc) {
+ dev_err(&pdev->dev, "Can't find coprocessor SW interrupt\n");
+ goto err_free;
+ }
+ }
+
+ /* Grab the SRAM */
+ master->sram_pool = of_gen_pool_get(dev_of_node(&pdev->dev), "aspeed,sram", 0);
+ if (!master->sram_pool) {
+ rc = -ENODEV;
+ dev_err(&pdev->dev, "Can't find sram pool\n");
+ goto err_free;
+ }
+
+ /* Current microcode only deals with fixed location in SRAM */
+ gpdf.offset = 0;
+ master->sram = (void __iomem *)gen_pool_alloc_algo(master->sram_pool, SRAM_SIZE,
+ gen_pool_fixed_alloc, &gpdf);
+ if (!master->sram) {
+ rc = -ENOMEM;
+ dev_err(&pdev->dev, "Failed to allocate sram from pool\n");
+ goto err_free;
+ }
+ dev_dbg(&pdev->dev, "SRAM allocation @%lx\n",
+ (unsigned long)gen_pool_virt_to_phys(master->sram_pool,
+ (unsigned long)master->sram));
+
+ /*
+ * Hookup with the GPIO driver for arbitration of GPIO banks
+ * ownership.
+ */
+ aspeed_gpio_copro_set_ops(&fsi_master_acf_gpio_ops, master);
+
+ /* Default FSI command delays */
+ master->t_send_delay = FSI_SEND_DELAY_CLOCKS;
+ master->t_echo_delay = FSI_ECHO_DELAY_CLOCKS;
+ master->master.n_links = 1;
+ if (master->is_ast2500)
+ master->master.flags = FSI_MASTER_FLAG_SWCLOCK;
+ master->master.read = fsi_master_acf_read;
+ master->master.write = fsi_master_acf_write;
+ master->master.term = fsi_master_acf_term;
+ master->master.send_break = fsi_master_acf_break;
+ master->master.link_enable = fsi_master_acf_link_enable;
+ master->master.link_config = fsi_master_acf_link_config;
+ master->master.dev.of_node = of_node_get(dev_of_node(master->dev));
+ master->master.dev.release = fsi_master_acf_release;
+ platform_set_drvdata(pdev, master);
+ mutex_init(&master->lock);
+
+ mutex_lock(&master->lock);
+ rc = fsi_master_acf_setup(master);
+ mutex_unlock(&master->lock);
+ if (rc)
+ goto release_of_dev;
+
+ rc = device_create_file(&pdev->dev, &dev_attr_external_mode);
+ if (rc)
+ goto stop_copro;
+
+ rc = fsi_master_register(&master->master);
+ if (!rc)
+ return 0;
+
+ device_remove_file(master->dev, &dev_attr_external_mode);
+ put_device(&master->master.dev);
+ return rc;
+
+ stop_copro:
+ fsi_master_acf_terminate(master);
+ release_of_dev:
+ aspeed_gpio_copro_set_ops(NULL, NULL);
+ gen_pool_free(master->sram_pool, (unsigned long)master->sram, SRAM_SIZE);
+ of_node_put(dev_of_node(master->dev));
+ err_free:
+ kfree(master);
+ return rc;
+}
+
+
+static int fsi_master_acf_remove(struct platform_device *pdev)
+{
+ struct fsi_master_acf *master = platform_get_drvdata(pdev);
+
+ device_remove_file(master->dev, &dev_attr_external_mode);
+
+ fsi_master_unregister(&master->master);
+
+ return 0;
+}
+
+static const struct of_device_id fsi_master_acf_match[] = {
+ { .compatible = "aspeed,ast2400-cf-fsi-master" },
+ { .compatible = "aspeed,ast2500-cf-fsi-master" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, fsi_master_acf_match);
+
+static struct platform_driver fsi_master_acf = {
+ .driver = {
+ .name = "fsi-master-acf",
+ .of_match_table = fsi_master_acf_match,
+ },
+ .probe = fsi_master_acf_probe,
+ .remove = fsi_master_acf_remove,
+};
+
+module_platform_driver(fsi_master_acf);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(FW_FILE_NAME);
diff --git a/drivers/fsi/fsi-master-gpio.c b/drivers/fsi/fsi-master-gpio.c
new file mode 100644
index 000000000..ed03da4f2
--- /dev/null
+++ b/drivers/fsi/fsi-master-gpio.c
@@ -0,0 +1,897 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * A FSI master controller, using a simple GPIO bit-banging interface
+ */
+
+#include <linux/crc4.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/fsi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/io.h>
+#include <linux/irqflags.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "fsi-master.h"
+
+#define FSI_GPIO_STD_DLY 1 /* Standard pin delay in nS */
+#define LAST_ADDR_INVALID 0x1
+
+struct fsi_master_gpio {
+ struct fsi_master master;
+ struct device *dev;
+ struct mutex cmd_lock; /* mutex for command ordering */
+ struct gpio_desc *gpio_clk;
+ struct gpio_desc *gpio_data;
+ struct gpio_desc *gpio_trans; /* Voltage translator */
+ struct gpio_desc *gpio_enable; /* FSI enable */
+ struct gpio_desc *gpio_mux; /* Mux control */
+ bool external_mode;
+ bool no_delays;
+ uint32_t last_addr;
+ uint8_t t_send_delay;
+ uint8_t t_echo_delay;
+};
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/fsi_master_gpio.h>
+
+#define to_fsi_master_gpio(m) container_of(m, struct fsi_master_gpio, master)
+
+struct fsi_gpio_msg {
+ uint64_t msg;
+ uint8_t bits;
+};
+
+static void clock_toggle(struct fsi_master_gpio *master, int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++) {
+ if (!master->no_delays)
+ ndelay(FSI_GPIO_STD_DLY);
+ gpiod_set_value(master->gpio_clk, 0);
+ if (!master->no_delays)
+ ndelay(FSI_GPIO_STD_DLY);
+ gpiod_set_value(master->gpio_clk, 1);
+ }
+}
+
+static int sda_clock_in(struct fsi_master_gpio *master)
+{
+ int in;
+
+ if (!master->no_delays)
+ ndelay(FSI_GPIO_STD_DLY);
+ gpiod_set_value(master->gpio_clk, 0);
+
+ /* Dummy read to feed the synchronizers */
+ gpiod_get_value(master->gpio_data);
+
+ /* Actual data read */
+ in = gpiod_get_value(master->gpio_data);
+ if (!master->no_delays)
+ ndelay(FSI_GPIO_STD_DLY);
+ gpiod_set_value(master->gpio_clk, 1);
+ return in ? 1 : 0;
+}
+
+static void sda_out(struct fsi_master_gpio *master, int value)
+{
+ gpiod_set_value(master->gpio_data, value);
+}
+
+static void set_sda_input(struct fsi_master_gpio *master)
+{
+ gpiod_direction_input(master->gpio_data);
+ gpiod_set_value(master->gpio_trans, 0);
+}
+
+static void set_sda_output(struct fsi_master_gpio *master, int value)
+{
+ gpiod_set_value(master->gpio_trans, 1);
+ gpiod_direction_output(master->gpio_data, value);
+}
+
+static void clock_zeros(struct fsi_master_gpio *master, int count)
+{
+ trace_fsi_master_gpio_clock_zeros(master, count);
+ set_sda_output(master, 1);
+ clock_toggle(master, count);
+}
+
+static void echo_delay(struct fsi_master_gpio *master)
+{
+ clock_zeros(master, master->t_echo_delay);
+}
+
+
+static void serial_in(struct fsi_master_gpio *master, struct fsi_gpio_msg *msg,
+ uint8_t num_bits)
+{
+ uint8_t bit, in_bit;
+
+ set_sda_input(master);
+
+ for (bit = 0; bit < num_bits; bit++) {
+ in_bit = sda_clock_in(master);
+ msg->msg <<= 1;
+ msg->msg |= ~in_bit & 0x1; /* Data is active low */
+ }
+ msg->bits += num_bits;
+
+ trace_fsi_master_gpio_in(master, num_bits, msg->msg);
+}
+
+static void serial_out(struct fsi_master_gpio *master,
+ const struct fsi_gpio_msg *cmd)
+{
+ uint8_t bit;
+ uint64_t msg = ~cmd->msg; /* Data is active low */
+ uint64_t sda_mask = 0x1ULL << (cmd->bits - 1);
+ uint64_t last_bit = ~0;
+ int next_bit;
+
+ trace_fsi_master_gpio_out(master, cmd->bits, cmd->msg);
+
+ if (!cmd->bits) {
+ dev_warn(master->dev, "trying to output 0 bits\n");
+ return;
+ }
+ set_sda_output(master, 0);
+
+ /* Send the start bit */
+ sda_out(master, 0);
+ clock_toggle(master, 1);
+
+ /* Send the message */
+ for (bit = 0; bit < cmd->bits; bit++) {
+ next_bit = (msg & sda_mask) >> (cmd->bits - 1);
+ if (last_bit ^ next_bit) {
+ sda_out(master, next_bit);
+ last_bit = next_bit;
+ }
+ clock_toggle(master, 1);
+ msg <<= 1;
+ }
+}
+
+static void msg_push_bits(struct fsi_gpio_msg *msg, uint64_t data, int bits)
+{
+ msg->msg <<= bits;
+ msg->msg |= data & ((1ull << bits) - 1);
+ msg->bits += bits;
+}
+
+static void msg_push_crc(struct fsi_gpio_msg *msg)
+{
+ uint8_t crc;
+ int top;
+
+ top = msg->bits & 0x3;
+
+ /* start bit, and any non-aligned top bits */
+ crc = crc4(0, 1 << top | msg->msg >> (msg->bits - top), top + 1);
+
+ /* aligned bits */
+ crc = crc4(crc, msg->msg, msg->bits - top);
+
+ msg_push_bits(msg, crc, 4);
+}
+
+static bool check_same_address(struct fsi_master_gpio *master, int id,
+ uint32_t addr)
+{
+ /* this will also handle LAST_ADDR_INVALID */
+ return master->last_addr == (((id & 0x3) << 21) | (addr & ~0x3));
+}
+
+static bool check_relative_address(struct fsi_master_gpio *master, int id,
+ uint32_t addr, uint32_t *rel_addrp)
+{
+ uint32_t last_addr = master->last_addr;
+ int32_t rel_addr;
+
+ if (last_addr == LAST_ADDR_INVALID)
+ return false;
+
+ /* We may be in 23-bit addressing mode, which uses the id as the
+ * top two address bits. So, if we're referencing a different ID,
+ * use absolute addresses.
+ */
+ if (((last_addr >> 21) & 0x3) != id)
+ return false;
+
+ /* remove the top two bits from any 23-bit addressing */
+ last_addr &= (1 << 21) - 1;
+
+ /* We know that the addresses are limited to 21 bits, so this won't
+ * overflow the signed rel_addr */
+ rel_addr = addr - last_addr;
+ if (rel_addr > 255 || rel_addr < -256)
+ return false;
+
+ *rel_addrp = (uint32_t)rel_addr;
+
+ return true;
+}
+
+static void last_address_update(struct fsi_master_gpio *master,
+ int id, bool valid, uint32_t addr)
+{
+ if (!valid)
+ master->last_addr = LAST_ADDR_INVALID;
+ else
+ master->last_addr = ((id & 0x3) << 21) | (addr & ~0x3);
+}
+
+/*
+ * Encode an Absolute/Relative/Same Address command
+ */
+static void build_ar_command(struct fsi_master_gpio *master,
+ struct fsi_gpio_msg *cmd, uint8_t id,
+ uint32_t addr, size_t size, const void *data)
+{
+ int i, addr_bits, opcode_bits;
+ bool write = !!data;
+ uint8_t ds, opcode;
+ uint32_t rel_addr;
+
+ cmd->bits = 0;
+ cmd->msg = 0;
+
+ /* we have 21 bits of address max */
+ addr &= ((1 << 21) - 1);
+
+ /* cmd opcodes are variable length - SAME_AR is only two bits */
+ opcode_bits = 3;
+
+ if (check_same_address(master, id, addr)) {
+ /* we still address the byte offset within the word */
+ addr_bits = 2;
+ opcode_bits = 2;
+ opcode = FSI_CMD_SAME_AR;
+ trace_fsi_master_gpio_cmd_same_addr(master);
+
+ } else if (check_relative_address(master, id, addr, &rel_addr)) {
+ /* 8 bits plus sign */
+ addr_bits = 9;
+ addr = rel_addr;
+ opcode = FSI_CMD_REL_AR;
+ trace_fsi_master_gpio_cmd_rel_addr(master, rel_addr);
+
+ } else {
+ addr_bits = 21;
+ opcode = FSI_CMD_ABS_AR;
+ trace_fsi_master_gpio_cmd_abs_addr(master, addr);
+ }
+
+ /*
+ * The read/write size is encoded in the lower bits of the address
+ * (as it must be naturally-aligned), and the following ds bit.
+ *
+ * size addr:1 addr:0 ds
+ * 1 x x 0
+ * 2 x 0 1
+ * 4 0 1 1
+ *
+ */
+ ds = size > 1 ? 1 : 0;
+ addr &= ~(size - 1);
+ if (size == 4)
+ addr |= 1;
+
+ msg_push_bits(cmd, id, 2);
+ msg_push_bits(cmd, opcode, opcode_bits);
+ msg_push_bits(cmd, write ? 0 : 1, 1);
+ msg_push_bits(cmd, addr, addr_bits);
+ msg_push_bits(cmd, ds, 1);
+ for (i = 0; write && i < size; i++)
+ msg_push_bits(cmd, ((uint8_t *)data)[i], 8);
+
+ msg_push_crc(cmd);
+}
+
+static void build_dpoll_command(struct fsi_gpio_msg *cmd, uint8_t slave_id)
+{
+ cmd->bits = 0;
+ cmd->msg = 0;
+
+ msg_push_bits(cmd, slave_id, 2);
+ msg_push_bits(cmd, FSI_CMD_DPOLL, 3);
+ msg_push_crc(cmd);
+}
+
+static void build_epoll_command(struct fsi_gpio_msg *cmd, uint8_t slave_id)
+{
+ cmd->bits = 0;
+ cmd->msg = 0;
+
+ msg_push_bits(cmd, slave_id, 2);
+ msg_push_bits(cmd, FSI_CMD_EPOLL, 3);
+ msg_push_crc(cmd);
+}
+
+static void build_term_command(struct fsi_gpio_msg *cmd, uint8_t slave_id)
+{
+ cmd->bits = 0;
+ cmd->msg = 0;
+
+ msg_push_bits(cmd, slave_id, 2);
+ msg_push_bits(cmd, FSI_CMD_TERM, 6);
+ msg_push_crc(cmd);
+}
+
+/*
+ * Note: callers rely specifically on this returning -EAGAIN for
+ * a CRC error detected in the response. Use other error code
+ * for other situations. It will be converted to something else
+ * higher up the stack before it reaches userspace.
+ */
+static int read_one_response(struct fsi_master_gpio *master,
+ uint8_t data_size, struct fsi_gpio_msg *msgp, uint8_t *tagp)
+{
+ struct fsi_gpio_msg msg;
+ unsigned long flags;
+ uint32_t crc;
+ uint8_t tag;
+ int i;
+
+ local_irq_save(flags);
+
+ /* wait for the start bit */
+ for (i = 0; i < FSI_MASTER_MTOE_COUNT; i++) {
+ msg.bits = 0;
+ msg.msg = 0;
+ serial_in(master, &msg, 1);
+ if (msg.msg)
+ break;
+ }
+ if (i == FSI_MASTER_MTOE_COUNT) {
+ dev_dbg(master->dev,
+ "Master time out waiting for response\n");
+ local_irq_restore(flags);
+ return -ETIMEDOUT;
+ }
+
+ msg.bits = 0;
+ msg.msg = 0;
+
+ /* Read slave ID & response tag */
+ serial_in(master, &msg, 4);
+
+ tag = msg.msg & 0x3;
+
+ /* If we have an ACK and we're expecting data, clock the data in too */
+ if (tag == FSI_RESP_ACK && data_size)
+ serial_in(master, &msg, data_size * 8);
+
+ /* read CRC */
+ serial_in(master, &msg, FSI_CRC_SIZE);
+
+ local_irq_restore(flags);
+
+ /* we have a whole message now; check CRC */
+ crc = crc4(0, 1, 1);
+ crc = crc4(crc, msg.msg, msg.bits);
+ if (crc) {
+ /* Check if it's all 1's, that probably means the host is off */
+ if (((~msg.msg) & ((1ull << msg.bits) - 1)) == 0)
+ return -ENODEV;
+ dev_dbg(master->dev, "ERR response CRC msg: 0x%016llx (%d bits)\n",
+ msg.msg, msg.bits);
+ return -EAGAIN;
+ }
+
+ if (msgp)
+ *msgp = msg;
+ if (tagp)
+ *tagp = tag;
+
+ return 0;
+}
+
+static int issue_term(struct fsi_master_gpio *master, uint8_t slave)
+{
+ struct fsi_gpio_msg cmd;
+ unsigned long flags;
+ uint8_t tag;
+ int rc;
+
+ build_term_command(&cmd, slave);
+
+ local_irq_save(flags);
+ serial_out(master, &cmd);
+ echo_delay(master);
+ local_irq_restore(flags);
+
+ rc = read_one_response(master, 0, NULL, &tag);
+ if (rc < 0) {
+ dev_err(master->dev,
+ "TERM failed; lost communication with slave\n");
+ return -EIO;
+ } else if (tag != FSI_RESP_ACK) {
+ dev_err(master->dev, "TERM failed; response %d\n", tag);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int poll_for_response(struct fsi_master_gpio *master,
+ uint8_t slave, uint8_t size, void *data)
+{
+ struct fsi_gpio_msg response, cmd;
+ int busy_count = 0, rc, i;
+ unsigned long flags;
+ uint8_t tag;
+ uint8_t *data_byte = data;
+ int crc_err_retries = 0;
+retry:
+ rc = read_one_response(master, size, &response, &tag);
+
+ /* Handle retries on CRC errors */
+ if (rc == -EAGAIN) {
+ /* Too many retries ? */
+ if (crc_err_retries++ > FSI_CRC_ERR_RETRIES) {
+ /*
+ * Pass it up as a -EIO otherwise upper level will retry
+ * the whole command which isn't what we want here.
+ */
+ rc = -EIO;
+ goto fail;
+ }
+ dev_dbg(master->dev,
+ "CRC error retry %d\n", crc_err_retries);
+ trace_fsi_master_gpio_crc_rsp_error(master);
+ build_epoll_command(&cmd, slave);
+ local_irq_save(flags);
+ clock_zeros(master, FSI_MASTER_EPOLL_CLOCKS);
+ serial_out(master, &cmd);
+ echo_delay(master);
+ local_irq_restore(flags);
+ goto retry;
+ } else if (rc)
+ goto fail;
+
+ switch (tag) {
+ case FSI_RESP_ACK:
+ if (size && data) {
+ uint64_t val = response.msg;
+ /* clear crc & mask */
+ val >>= 4;
+ val &= (1ull << (size * 8)) - 1;
+
+ for (i = 0; i < size; i++) {
+ data_byte[size-i-1] = val;
+ val >>= 8;
+ }
+ }
+ break;
+ case FSI_RESP_BUSY:
+ /*
+ * Its necessary to clock slave before issuing
+ * d-poll, not indicated in the hardware protocol
+ * spec. < 20 clocks causes slave to hang, 21 ok.
+ */
+ if (busy_count++ < FSI_MASTER_MAX_BUSY) {
+ build_dpoll_command(&cmd, slave);
+ local_irq_save(flags);
+ clock_zeros(master, FSI_MASTER_DPOLL_CLOCKS);
+ serial_out(master, &cmd);
+ echo_delay(master);
+ local_irq_restore(flags);
+ goto retry;
+ }
+ dev_warn(master->dev,
+ "ERR slave is stuck in busy state, issuing TERM\n");
+ local_irq_save(flags);
+ clock_zeros(master, FSI_MASTER_DPOLL_CLOCKS);
+ local_irq_restore(flags);
+ issue_term(master, slave);
+ rc = -EIO;
+ break;
+
+ case FSI_RESP_ERRA:
+ dev_dbg(master->dev, "ERRA received: 0x%x\n", (int)response.msg);
+ rc = -EIO;
+ break;
+ case FSI_RESP_ERRC:
+ dev_dbg(master->dev, "ERRC received: 0x%x\n", (int)response.msg);
+ trace_fsi_master_gpio_crc_cmd_error(master);
+ rc = -EAGAIN;
+ break;
+ }
+
+ if (busy_count > 0)
+ trace_fsi_master_gpio_poll_response_busy(master, busy_count);
+ fail:
+ /*
+ * tSendDelay clocks, avoids signal reflections when switching
+ * from receive of response back to send of data.
+ */
+ local_irq_save(flags);
+ clock_zeros(master, master->t_send_delay);
+ local_irq_restore(flags);
+
+ return rc;
+}
+
+static int send_request(struct fsi_master_gpio *master,
+ struct fsi_gpio_msg *cmd)
+{
+ unsigned long flags;
+
+ if (master->external_mode)
+ return -EBUSY;
+
+ local_irq_save(flags);
+ serial_out(master, cmd);
+ echo_delay(master);
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static int fsi_master_gpio_xfer(struct fsi_master_gpio *master, uint8_t slave,
+ struct fsi_gpio_msg *cmd, size_t resp_len, void *resp)
+{
+ int rc = -EAGAIN, retries = 0;
+
+ while ((retries++) < FSI_CRC_ERR_RETRIES) {
+ rc = send_request(master, cmd);
+ if (rc)
+ break;
+ rc = poll_for_response(master, slave, resp_len, resp);
+ if (rc != -EAGAIN)
+ break;
+ rc = -EIO;
+ dev_warn(master->dev, "ECRC retry %d\n", retries);
+
+ /* Pace it a bit before retry */
+ msleep(1);
+ }
+
+ return rc;
+}
+
+static int fsi_master_gpio_read(struct fsi_master *_master, int link,
+ uint8_t id, uint32_t addr, void *val, size_t size)
+{
+ struct fsi_master_gpio *master = to_fsi_master_gpio(_master);
+ struct fsi_gpio_msg cmd;
+ int rc;
+
+ if (link != 0)
+ return -ENODEV;
+
+ mutex_lock(&master->cmd_lock);
+ build_ar_command(master, &cmd, id, addr, size, NULL);
+ rc = fsi_master_gpio_xfer(master, id, &cmd, size, val);
+ last_address_update(master, id, rc == 0, addr);
+ mutex_unlock(&master->cmd_lock);
+
+ return rc;
+}
+
+static int fsi_master_gpio_write(struct fsi_master *_master, int link,
+ uint8_t id, uint32_t addr, const void *val, size_t size)
+{
+ struct fsi_master_gpio *master = to_fsi_master_gpio(_master);
+ struct fsi_gpio_msg cmd;
+ int rc;
+
+ if (link != 0)
+ return -ENODEV;
+
+ mutex_lock(&master->cmd_lock);
+ build_ar_command(master, &cmd, id, addr, size, val);
+ rc = fsi_master_gpio_xfer(master, id, &cmd, 0, NULL);
+ last_address_update(master, id, rc == 0, addr);
+ mutex_unlock(&master->cmd_lock);
+
+ return rc;
+}
+
+static int fsi_master_gpio_term(struct fsi_master *_master,
+ int link, uint8_t id)
+{
+ struct fsi_master_gpio *master = to_fsi_master_gpio(_master);
+ struct fsi_gpio_msg cmd;
+ int rc;
+
+ if (link != 0)
+ return -ENODEV;
+
+ mutex_lock(&master->cmd_lock);
+ build_term_command(&cmd, id);
+ rc = fsi_master_gpio_xfer(master, id, &cmd, 0, NULL);
+ last_address_update(master, id, false, 0);
+ mutex_unlock(&master->cmd_lock);
+
+ return rc;
+}
+
+static int fsi_master_gpio_break(struct fsi_master *_master, int link)
+{
+ struct fsi_master_gpio *master = to_fsi_master_gpio(_master);
+ unsigned long flags;
+
+ if (link != 0)
+ return -ENODEV;
+
+ trace_fsi_master_gpio_break(master);
+
+ mutex_lock(&master->cmd_lock);
+ if (master->external_mode) {
+ mutex_unlock(&master->cmd_lock);
+ return -EBUSY;
+ }
+
+ local_irq_save(flags);
+
+ set_sda_output(master, 1);
+ sda_out(master, 1);
+ clock_toggle(master, FSI_PRE_BREAK_CLOCKS);
+ sda_out(master, 0);
+ clock_toggle(master, FSI_BREAK_CLOCKS);
+ echo_delay(master);
+ sda_out(master, 1);
+ clock_toggle(master, FSI_POST_BREAK_CLOCKS);
+
+ local_irq_restore(flags);
+
+ last_address_update(master, 0, false, 0);
+ mutex_unlock(&master->cmd_lock);
+
+ /* Wait for logic reset to take effect */
+ udelay(200);
+
+ return 0;
+}
+
+static void fsi_master_gpio_init(struct fsi_master_gpio *master)
+{
+ unsigned long flags;
+
+ gpiod_direction_output(master->gpio_mux, 1);
+ gpiod_direction_output(master->gpio_trans, 1);
+ gpiod_direction_output(master->gpio_enable, 1);
+ gpiod_direction_output(master->gpio_clk, 1);
+ gpiod_direction_output(master->gpio_data, 1);
+
+ /* todo: evaluate if clocks can be reduced */
+ local_irq_save(flags);
+ clock_zeros(master, FSI_INIT_CLOCKS);
+ local_irq_restore(flags);
+}
+
+static void fsi_master_gpio_init_external(struct fsi_master_gpio *master)
+{
+ gpiod_direction_output(master->gpio_mux, 0);
+ gpiod_direction_output(master->gpio_trans, 0);
+ gpiod_direction_output(master->gpio_enable, 1);
+ gpiod_direction_input(master->gpio_clk);
+ gpiod_direction_input(master->gpio_data);
+}
+
+static int fsi_master_gpio_link_enable(struct fsi_master *_master, int link,
+ bool enable)
+{
+ struct fsi_master_gpio *master = to_fsi_master_gpio(_master);
+ int rc = -EBUSY;
+
+ if (link != 0)
+ return -ENODEV;
+
+ mutex_lock(&master->cmd_lock);
+ if (!master->external_mode) {
+ gpiod_set_value(master->gpio_enable, enable ? 1 : 0);
+ rc = 0;
+ }
+ mutex_unlock(&master->cmd_lock);
+
+ return rc;
+}
+
+static int fsi_master_gpio_link_config(struct fsi_master *_master, int link,
+ u8 t_send_delay, u8 t_echo_delay)
+{
+ struct fsi_master_gpio *master = to_fsi_master_gpio(_master);
+
+ if (link != 0)
+ return -ENODEV;
+
+ mutex_lock(&master->cmd_lock);
+ master->t_send_delay = t_send_delay;
+ master->t_echo_delay = t_echo_delay;
+ mutex_unlock(&master->cmd_lock);
+
+ return 0;
+}
+
+static ssize_t external_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fsi_master_gpio *master = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE - 1, "%u\n",
+ master->external_mode ? 1 : 0);
+}
+
+static ssize_t external_mode_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct fsi_master_gpio *master = dev_get_drvdata(dev);
+ unsigned long val;
+ bool external_mode;
+ int err;
+
+ err = kstrtoul(buf, 0, &val);
+ if (err)
+ return err;
+
+ external_mode = !!val;
+
+ mutex_lock(&master->cmd_lock);
+
+ if (external_mode == master->external_mode) {
+ mutex_unlock(&master->cmd_lock);
+ return count;
+ }
+
+ master->external_mode = external_mode;
+ if (master->external_mode)
+ fsi_master_gpio_init_external(master);
+ else
+ fsi_master_gpio_init(master);
+
+ mutex_unlock(&master->cmd_lock);
+
+ fsi_master_rescan(&master->master);
+
+ return count;
+}
+
+static DEVICE_ATTR(external_mode, 0664,
+ external_mode_show, external_mode_store);
+
+static void fsi_master_gpio_release(struct device *dev)
+{
+ struct fsi_master_gpio *master = to_fsi_master_gpio(to_fsi_master(dev));
+
+ of_node_put(dev_of_node(master->dev));
+
+ kfree(master);
+}
+
+static int fsi_master_gpio_probe(struct platform_device *pdev)
+{
+ struct fsi_master_gpio *master;
+ struct gpio_desc *gpio;
+ int rc;
+
+ master = kzalloc(sizeof(*master), GFP_KERNEL);
+ if (!master)
+ return -ENOMEM;
+
+ master->dev = &pdev->dev;
+ master->master.dev.parent = master->dev;
+ master->master.dev.of_node = of_node_get(dev_of_node(master->dev));
+ master->master.dev.release = fsi_master_gpio_release;
+ master->last_addr = LAST_ADDR_INVALID;
+
+ gpio = devm_gpiod_get(&pdev->dev, "clock", 0);
+ if (IS_ERR(gpio)) {
+ dev_err(&pdev->dev, "failed to get clock gpio\n");
+ rc = PTR_ERR(gpio);
+ goto err_free;
+ }
+ master->gpio_clk = gpio;
+
+ gpio = devm_gpiod_get(&pdev->dev, "data", 0);
+ if (IS_ERR(gpio)) {
+ dev_err(&pdev->dev, "failed to get data gpio\n");
+ rc = PTR_ERR(gpio);
+ goto err_free;
+ }
+ master->gpio_data = gpio;
+
+ /* Optional GPIOs */
+ gpio = devm_gpiod_get_optional(&pdev->dev, "trans", 0);
+ if (IS_ERR(gpio)) {
+ dev_err(&pdev->dev, "failed to get trans gpio\n");
+ rc = PTR_ERR(gpio);
+ goto err_free;
+ }
+ master->gpio_trans = gpio;
+
+ gpio = devm_gpiod_get_optional(&pdev->dev, "enable", 0);
+ if (IS_ERR(gpio)) {
+ dev_err(&pdev->dev, "failed to get enable gpio\n");
+ rc = PTR_ERR(gpio);
+ goto err_free;
+ }
+ master->gpio_enable = gpio;
+
+ gpio = devm_gpiod_get_optional(&pdev->dev, "mux", 0);
+ if (IS_ERR(gpio)) {
+ dev_err(&pdev->dev, "failed to get mux gpio\n");
+ rc = PTR_ERR(gpio);
+ goto err_free;
+ }
+ master->gpio_mux = gpio;
+
+ /*
+ * Check if GPIO block is slow enought that no extra delays
+ * are necessary. This improves performance on ast2500 by
+ * an order of magnitude.
+ */
+ master->no_delays = device_property_present(&pdev->dev, "no-gpio-delays");
+
+ /* Default FSI command delays */
+ master->t_send_delay = FSI_SEND_DELAY_CLOCKS;
+ master->t_echo_delay = FSI_ECHO_DELAY_CLOCKS;
+
+ master->master.n_links = 1;
+ master->master.flags = FSI_MASTER_FLAG_SWCLOCK;
+ master->master.read = fsi_master_gpio_read;
+ master->master.write = fsi_master_gpio_write;
+ master->master.term = fsi_master_gpio_term;
+ master->master.send_break = fsi_master_gpio_break;
+ master->master.link_enable = fsi_master_gpio_link_enable;
+ master->master.link_config = fsi_master_gpio_link_config;
+ platform_set_drvdata(pdev, master);
+ mutex_init(&master->cmd_lock);
+
+ fsi_master_gpio_init(master);
+
+ rc = device_create_file(&pdev->dev, &dev_attr_external_mode);
+ if (rc)
+ goto err_free;
+
+ rc = fsi_master_register(&master->master);
+ if (rc) {
+ device_remove_file(&pdev->dev, &dev_attr_external_mode);
+ put_device(&master->master.dev);
+ return rc;
+ }
+ return 0;
+ err_free:
+ kfree(master);
+ return rc;
+}
+
+
+
+static int fsi_master_gpio_remove(struct platform_device *pdev)
+{
+ struct fsi_master_gpio *master = platform_get_drvdata(pdev);
+
+ device_remove_file(&pdev->dev, &dev_attr_external_mode);
+
+ fsi_master_unregister(&master->master);
+
+ return 0;
+}
+
+static const struct of_device_id fsi_master_gpio_match[] = {
+ { .compatible = "fsi-master-gpio" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, fsi_master_gpio_match);
+
+static struct platform_driver fsi_master_gpio_driver = {
+ .driver = {
+ .name = "fsi-master-gpio",
+ .of_match_table = fsi_master_gpio_match,
+ },
+ .probe = fsi_master_gpio_probe,
+ .remove = fsi_master_gpio_remove,
+};
+
+module_platform_driver(fsi_master_gpio_driver);
+MODULE_LICENSE("GPL");
diff --git a/drivers/fsi/fsi-master-hub.c b/drivers/fsi/fsi-master-hub.c
new file mode 100644
index 000000000..6d8b6e885
--- /dev/null
+++ b/drivers/fsi/fsi-master-hub.c
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * FSI hub master driver
+ *
+ * Copyright (C) IBM Corporation 2016
+ */
+
+#include <linux/delay.h>
+#include <linux/fsi.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+#include "fsi-master.h"
+
+#define FSI_ENGID_HUB_MASTER 0x1c
+
+#define FSI_LINK_ENABLE_SETUP_TIME 10 /* in mS */
+
+/*
+ * FSI hub master support
+ *
+ * A hub master increases the number of potential target devices that the
+ * primary FSI master can access. For each link a primary master supports,
+ * each of those links can in turn be chained to a hub master with multiple
+ * links of its own.
+ *
+ * The hub is controlled by a set of control registers exposed as a regular fsi
+ * device (the hub->upstream device), and provides access to the downstream FSI
+ * bus as through an address range on the slave itself (->addr and ->size).
+ *
+ * [This differs from "cascaded" masters, which expose the entire downstream
+ * bus entirely through the fsi device address range, and so have a smaller
+ * accessible address space.]
+ */
+struct fsi_master_hub {
+ struct fsi_master master;
+ struct fsi_device *upstream;
+ uint32_t addr, size; /* slave-relative addr of */
+ /* master address space */
+};
+
+#define to_fsi_master_hub(m) container_of(m, struct fsi_master_hub, master)
+
+static int hub_master_read(struct fsi_master *master, int link,
+ uint8_t id, uint32_t addr, void *val, size_t size)
+{
+ struct fsi_master_hub *hub = to_fsi_master_hub(master);
+
+ if (id != 0)
+ return -EINVAL;
+
+ addr += hub->addr + (link * FSI_HUB_LINK_SIZE);
+ return fsi_slave_read(hub->upstream->slave, addr, val, size);
+}
+
+static int hub_master_write(struct fsi_master *master, int link,
+ uint8_t id, uint32_t addr, const void *val, size_t size)
+{
+ struct fsi_master_hub *hub = to_fsi_master_hub(master);
+
+ if (id != 0)
+ return -EINVAL;
+
+ addr += hub->addr + (link * FSI_HUB_LINK_SIZE);
+ return fsi_slave_write(hub->upstream->slave, addr, val, size);
+}
+
+static int hub_master_break(struct fsi_master *master, int link)
+{
+ uint32_t addr;
+ __be32 cmd;
+
+ addr = 0x4;
+ cmd = cpu_to_be32(0xc0de0000);
+
+ return hub_master_write(master, link, 0, addr, &cmd, sizeof(cmd));
+}
+
+static int hub_master_link_enable(struct fsi_master *master, int link,
+ bool enable)
+{
+ struct fsi_master_hub *hub = to_fsi_master_hub(master);
+ int idx, bit;
+ __be32 reg;
+ int rc;
+
+ idx = link / 32;
+ bit = link % 32;
+
+ reg = cpu_to_be32(0x80000000 >> bit);
+
+ if (!enable)
+ return fsi_device_write(hub->upstream, FSI_MCENP0 + (4 * idx),
+ &reg, 4);
+
+ rc = fsi_device_write(hub->upstream, FSI_MSENP0 + (4 * idx), &reg, 4);
+ if (rc)
+ return rc;
+
+ mdelay(FSI_LINK_ENABLE_SETUP_TIME);
+
+ return 0;
+}
+
+static void hub_master_release(struct device *dev)
+{
+ struct fsi_master_hub *hub = to_fsi_master_hub(to_fsi_master(dev));
+
+ kfree(hub);
+}
+
+/* mmode encoders */
+static inline u32 fsi_mmode_crs0(u32 x)
+{
+ return (x & FSI_MMODE_CRS0MASK) << FSI_MMODE_CRS0SHFT;
+}
+
+static inline u32 fsi_mmode_crs1(u32 x)
+{
+ return (x & FSI_MMODE_CRS1MASK) << FSI_MMODE_CRS1SHFT;
+}
+
+static int hub_master_init(struct fsi_master_hub *hub)
+{
+ struct fsi_device *dev = hub->upstream;
+ __be32 reg;
+ int rc;
+
+ reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
+ | FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
+ rc = fsi_device_write(dev, FSI_MRESP0, &reg, sizeof(reg));
+ if (rc)
+ return rc;
+
+ /* Initialize the MFSI (hub master) engine */
+ reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
+ | FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
+ rc = fsi_device_write(dev, FSI_MRESP0, &reg, sizeof(reg));
+ if (rc)
+ return rc;
+
+ reg = cpu_to_be32(FSI_MECTRL_EOAE | FSI_MECTRL_P8_AUTO_TERM);
+ rc = fsi_device_write(dev, FSI_MECTRL, &reg, sizeof(reg));
+ if (rc)
+ return rc;
+
+ reg = cpu_to_be32(FSI_MMODE_EIP | FSI_MMODE_ECRC | FSI_MMODE_EPC
+ | fsi_mmode_crs0(1) | fsi_mmode_crs1(1)
+ | FSI_MMODE_P8_TO_LSB);
+ rc = fsi_device_write(dev, FSI_MMODE, &reg, sizeof(reg));
+ if (rc)
+ return rc;
+
+ reg = cpu_to_be32(0xffff0000);
+ rc = fsi_device_write(dev, FSI_MDLYR, &reg, sizeof(reg));
+ if (rc)
+ return rc;
+
+ reg = cpu_to_be32(~0);
+ rc = fsi_device_write(dev, FSI_MSENP0, &reg, sizeof(reg));
+ if (rc)
+ return rc;
+
+ /* Leave enabled long enough for master logic to set up */
+ mdelay(FSI_LINK_ENABLE_SETUP_TIME);
+
+ rc = fsi_device_write(dev, FSI_MCENP0, &reg, sizeof(reg));
+ if (rc)
+ return rc;
+
+ rc = fsi_device_read(dev, FSI_MAEB, &reg, sizeof(reg));
+ if (rc)
+ return rc;
+
+ reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK);
+ rc = fsi_device_write(dev, FSI_MRESP0, &reg, sizeof(reg));
+ if (rc)
+ return rc;
+
+ rc = fsi_device_read(dev, FSI_MLEVP0, &reg, sizeof(reg));
+ if (rc)
+ return rc;
+
+ /* Reset the master bridge */
+ reg = cpu_to_be32(FSI_MRESB_RST_GEN);
+ rc = fsi_device_write(dev, FSI_MRESB0, &reg, sizeof(reg));
+ if (rc)
+ return rc;
+
+ reg = cpu_to_be32(FSI_MRESB_RST_ERR);
+ return fsi_device_write(dev, FSI_MRESB0, &reg, sizeof(reg));
+}
+
+static int hub_master_probe(struct device *dev)
+{
+ struct fsi_device *fsi_dev = to_fsi_dev(dev);
+ struct fsi_master_hub *hub;
+ uint32_t reg, links;
+ __be32 __reg;
+ int rc;
+
+ rc = fsi_device_read(fsi_dev, FSI_MVER, &__reg, sizeof(__reg));
+ if (rc)
+ return rc;
+
+ reg = be32_to_cpu(__reg);
+ links = (reg >> 8) & 0xff;
+ dev_dbg(dev, "hub version %08x (%d links)\n", reg, links);
+
+ rc = fsi_slave_claim_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET,
+ FSI_HUB_LINK_SIZE * links);
+ if (rc) {
+ dev_err(dev, "can't claim slave address range for links");
+ return rc;
+ }
+
+ hub = kzalloc(sizeof(*hub), GFP_KERNEL);
+ if (!hub) {
+ rc = -ENOMEM;
+ goto err_release;
+ }
+
+ hub->addr = FSI_HUB_LINK_OFFSET;
+ hub->size = FSI_HUB_LINK_SIZE * links;
+ hub->upstream = fsi_dev;
+
+ hub->master.dev.parent = dev;
+ hub->master.dev.release = hub_master_release;
+ hub->master.dev.of_node = of_node_get(dev_of_node(dev));
+
+ hub->master.n_links = links;
+ hub->master.read = hub_master_read;
+ hub->master.write = hub_master_write;
+ hub->master.send_break = hub_master_break;
+ hub->master.link_enable = hub_master_link_enable;
+
+ dev_set_drvdata(dev, hub);
+
+ hub_master_init(hub);
+
+ rc = fsi_master_register(&hub->master);
+ if (rc)
+ goto err_release;
+
+ /* At this point, fsi_master_register performs the device_initialize(),
+ * and holds the sole reference on master.dev. This means the device
+ * will be freed (via ->release) during any subsequent call to
+ * fsi_master_unregister. We add our own reference to it here, so we
+ * can perform cleanup (in _remove()) without it being freed before
+ * we're ready.
+ */
+ get_device(&hub->master.dev);
+ return 0;
+
+err_release:
+ fsi_slave_release_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET,
+ FSI_HUB_LINK_SIZE * links);
+ return rc;
+}
+
+static int hub_master_remove(struct device *dev)
+{
+ struct fsi_master_hub *hub = dev_get_drvdata(dev);
+
+ fsi_master_unregister(&hub->master);
+ fsi_slave_release_range(hub->upstream->slave, hub->addr, hub->size);
+ of_node_put(hub->master.dev.of_node);
+
+ /*
+ * master.dev will likely be ->release()ed after this, which free()s
+ * the hub
+ */
+ put_device(&hub->master.dev);
+
+ return 0;
+}
+
+static const struct fsi_device_id hub_master_ids[] = {
+ {
+ .engine_type = FSI_ENGID_HUB_MASTER,
+ .version = FSI_VERSION_ANY,
+ },
+ { 0 }
+};
+
+static struct fsi_driver hub_master_driver = {
+ .id_table = hub_master_ids,
+ .drv = {
+ .name = "fsi-master-hub",
+ .bus = &fsi_bus_type,
+ .probe = hub_master_probe,
+ .remove = hub_master_remove,
+ }
+};
+
+module_fsi_driver(hub_master_driver);
+MODULE_LICENSE("GPL");
diff --git a/drivers/fsi/fsi-master-i2cr.c b/drivers/fsi/fsi-master-i2cr.c
new file mode 100644
index 000000000..40f1f4d23
--- /dev/null
+++ b/drivers/fsi/fsi-master-i2cr.c
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) IBM Corporation 2023 */
+
+#include <linux/device.h>
+#include <linux/fsi.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/mutex.h>
+
+#include "fsi-master-i2cr.h"
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/fsi_master_i2cr.h>
+
+#define I2CR_ADDRESS_CFAM(a) ((a) >> 2)
+#define I2CR_INITIAL_PARITY true
+
+#define I2CR_STATUS_CMD 0x60002
+#define I2CR_STATUS_ERR BIT_ULL(61)
+#define I2CR_ERROR_CMD 0x60004
+#define I2CR_LOG_CMD 0x60008
+
+static const u8 i2cr_cfam[] = {
+ 0xc0, 0x02, 0x0d, 0xa6,
+ 0x80, 0x01, 0x10, 0x02,
+ 0x80, 0x01, 0x10, 0x02,
+ 0x80, 0x01, 0x10, 0x02,
+ 0x80, 0x01, 0x80, 0x52,
+ 0x80, 0x01, 0x10, 0x02,
+ 0x80, 0x01, 0x10, 0x02,
+ 0x80, 0x01, 0x10, 0x02,
+ 0x80, 0x01, 0x10, 0x02,
+ 0x80, 0x01, 0x22, 0x2d,
+ 0x00, 0x00, 0x00, 0x00,
+ 0xde, 0xad, 0xc0, 0xde
+};
+
+static bool i2cr_check_parity32(u32 v, bool parity)
+{
+ u32 i;
+
+ for (i = 0; i < 32; ++i) {
+ if (v & (1u << i))
+ parity = !parity;
+ }
+
+ return parity;
+}
+
+static bool i2cr_check_parity64(u64 v)
+{
+ u32 i;
+ bool parity = I2CR_INITIAL_PARITY;
+
+ for (i = 0; i < 64; ++i) {
+ if (v & (1llu << i))
+ parity = !parity;
+ }
+
+ return parity;
+}
+
+static u32 i2cr_get_command(u32 address, bool parity)
+{
+ address <<= 1;
+
+ if (i2cr_check_parity32(address, parity))
+ address |= 1;
+
+ return address;
+}
+
+static int i2cr_transfer(struct i2c_client *client, u32 command, u64 *data)
+{
+ struct i2c_msg msgs[2];
+ int ret;
+
+ msgs[0].addr = client->addr;
+ msgs[0].flags = 0;
+ msgs[0].len = sizeof(command);
+ msgs[0].buf = (__u8 *)&command;
+ msgs[1].addr = client->addr;
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].len = sizeof(*data);
+ msgs[1].buf = (__u8 *)data;
+
+ ret = i2c_transfer(client->adapter, msgs, 2);
+ if (ret == 2)
+ return 0;
+
+ trace_i2cr_i2c_error(client, command, ret);
+
+ if (ret < 0)
+ return ret;
+
+ return -EIO;
+}
+
+static int i2cr_check_status(struct i2c_client *client)
+{
+ u64 status;
+ int ret;
+
+ ret = i2cr_transfer(client, I2CR_STATUS_CMD, &status);
+ if (ret)
+ return ret;
+
+ if (status & I2CR_STATUS_ERR) {
+ u32 buf[3] = { 0, 0, 0 };
+ u64 error;
+ u64 log;
+
+ i2cr_transfer(client, I2CR_ERROR_CMD, &error);
+ i2cr_transfer(client, I2CR_LOG_CMD, &log);
+
+ trace_i2cr_status_error(client, status, error, log);
+
+ buf[0] = I2CR_STATUS_CMD;
+ i2c_master_send(client, (const char *)buf, sizeof(buf));
+
+ buf[0] = I2CR_ERROR_CMD;
+ i2c_master_send(client, (const char *)buf, sizeof(buf));
+
+ buf[0] = I2CR_LOG_CMD;
+ i2c_master_send(client, (const char *)buf, sizeof(buf));
+
+ dev_err(&client->dev, "status:%016llx error:%016llx log:%016llx\n", status, error,
+ log);
+ return -EREMOTEIO;
+ }
+
+ trace_i2cr_status(client, status);
+ return 0;
+}
+
+int fsi_master_i2cr_read(struct fsi_master_i2cr *i2cr, u32 addr, u64 *data)
+{
+ u32 command = i2cr_get_command(addr, I2CR_INITIAL_PARITY);
+ int ret;
+
+ mutex_lock(&i2cr->lock);
+
+ ret = i2cr_transfer(i2cr->client, command, data);
+ if (ret)
+ goto unlock;
+
+ ret = i2cr_check_status(i2cr->client);
+ if (ret)
+ goto unlock;
+
+ trace_i2cr_read(i2cr->client, command, data);
+
+unlock:
+ mutex_unlock(&i2cr->lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(fsi_master_i2cr_read);
+
+int fsi_master_i2cr_write(struct fsi_master_i2cr *i2cr, u32 addr, u64 data)
+{
+ u32 buf[3] = { 0 };
+ int ret;
+
+ buf[0] = i2cr_get_command(addr, i2cr_check_parity64(data));
+ memcpy(&buf[1], &data, sizeof(data));
+
+ mutex_lock(&i2cr->lock);
+
+ ret = i2c_master_send(i2cr->client, (const char *)buf, sizeof(buf));
+ if (ret == sizeof(buf)) {
+ ret = i2cr_check_status(i2cr->client);
+ if (!ret)
+ trace_i2cr_write(i2cr->client, buf[0], data);
+ } else {
+ trace_i2cr_i2c_error(i2cr->client, buf[0], ret);
+
+ if (ret >= 0)
+ ret = -EIO;
+ }
+
+ mutex_unlock(&i2cr->lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(fsi_master_i2cr_write);
+
+static int i2cr_read(struct fsi_master *master, int link, uint8_t id, uint32_t addr, void *val,
+ size_t size)
+{
+ struct fsi_master_i2cr *i2cr = container_of(master, struct fsi_master_i2cr, master);
+ u64 data;
+ size_t i;
+ int ret;
+
+ if (link || id || (addr & 0xffff0000) || !(size == 1 || size == 2 || size == 4))
+ return -EINVAL;
+
+ /*
+ * The I2CR doesn't have CFAM or FSI slave address space - only the
+ * engines. In order for this to work with the FSI core, we need to
+ * emulate at minimum the CFAM config table so that the appropriate
+ * engines are discovered.
+ */
+ if (addr < 0xc00) {
+ if (addr > sizeof(i2cr_cfam) - 4)
+ addr = (addr & 0x3) + (sizeof(i2cr_cfam) - 4);
+
+ memcpy(val, &i2cr_cfam[addr], size);
+ return 0;
+ }
+
+ ret = fsi_master_i2cr_read(i2cr, I2CR_ADDRESS_CFAM(addr), &data);
+ if (ret)
+ return ret;
+
+ /*
+ * FSI core expects up to 4 bytes BE back, while I2CR replied with LE
+ * bytes on the wire.
+ */
+ for (i = 0; i < size; ++i)
+ ((u8 *)val)[i] = ((u8 *)&data)[7 - i];
+
+ return 0;
+}
+
+static int i2cr_write(struct fsi_master *master, int link, uint8_t id, uint32_t addr,
+ const void *val, size_t size)
+{
+ struct fsi_master_i2cr *i2cr = container_of(master, struct fsi_master_i2cr, master);
+ u64 data = 0;
+ size_t i;
+
+ if (link || id || (addr & 0xffff0000) || !(size == 1 || size == 2 || size == 4))
+ return -EINVAL;
+
+ /* I2CR writes to CFAM or FSI slave address are a successful no-op. */
+ if (addr < 0xc00)
+ return 0;
+
+ /*
+ * FSI core passes up to 4 bytes BE, while the I2CR expects LE bytes on
+ * the wire.
+ */
+ for (i = 0; i < size; ++i)
+ ((u8 *)&data)[7 - i] = ((u8 *)val)[i];
+
+ return fsi_master_i2cr_write(i2cr, I2CR_ADDRESS_CFAM(addr), data);
+}
+
+static void i2cr_release(struct device *dev)
+{
+ struct fsi_master_i2cr *i2cr = to_fsi_master_i2cr(to_fsi_master(dev));
+
+ of_node_put(dev->of_node);
+
+ kfree(i2cr);
+}
+
+static int i2cr_probe(struct i2c_client *client)
+{
+ struct fsi_master_i2cr *i2cr;
+ int ret;
+
+ i2cr = kzalloc(sizeof(*i2cr), GFP_KERNEL);
+ if (!i2cr)
+ return -ENOMEM;
+
+ /* Only one I2CR on any given I2C bus (fixed I2C device address) */
+ i2cr->master.idx = client->adapter->nr;
+ dev_set_name(&i2cr->master.dev, "i2cr%d", i2cr->master.idx);
+ i2cr->master.dev.parent = &client->dev;
+ i2cr->master.dev.of_node = of_node_get(dev_of_node(&client->dev));
+ i2cr->master.dev.release = i2cr_release;
+
+ i2cr->master.n_links = 1;
+ i2cr->master.read = i2cr_read;
+ i2cr->master.write = i2cr_write;
+
+ mutex_init(&i2cr->lock);
+ i2cr->client = client;
+
+ ret = fsi_master_register(&i2cr->master);
+ if (ret)
+ return ret;
+
+ i2c_set_clientdata(client, i2cr);
+ return 0;
+}
+
+static void i2cr_remove(struct i2c_client *client)
+{
+ struct fsi_master_i2cr *i2cr = i2c_get_clientdata(client);
+
+ fsi_master_unregister(&i2cr->master);
+}
+
+static const struct of_device_id i2cr_ids[] = {
+ { .compatible = "ibm,i2cr-fsi-master" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, i2cr_ids);
+
+static struct i2c_driver i2cr_driver = {
+ .probe = i2cr_probe,
+ .remove = i2cr_remove,
+ .driver = {
+ .name = "fsi-master-i2cr",
+ .of_match_table = i2cr_ids,
+ },
+};
+
+module_i2c_driver(i2cr_driver)
+
+MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>");
+MODULE_DESCRIPTION("IBM I2C Responder virtual FSI master driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/fsi/fsi-master-i2cr.h b/drivers/fsi/fsi-master-i2cr.h
new file mode 100644
index 000000000..96636bf28
--- /dev/null
+++ b/drivers/fsi/fsi-master-i2cr.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) IBM Corporation 2023 */
+
+#ifndef DRIVERS_FSI_MASTER_I2CR_H
+#define DRIVERS_FSI_MASTER_I2CR_H
+
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+
+#include "fsi-master.h"
+
+struct i2c_client;
+
+struct fsi_master_i2cr {
+ struct fsi_master master;
+ struct mutex lock; /* protect HW access */
+ struct i2c_client *client;
+};
+
+#define to_fsi_master_i2cr(m) container_of(m, struct fsi_master_i2cr, master)
+
+int fsi_master_i2cr_read(struct fsi_master_i2cr *i2cr, u32 addr, u64 *data);
+int fsi_master_i2cr_write(struct fsi_master_i2cr *i2cr, u32 addr, u64 data);
+
+static inline bool is_fsi_master_i2cr(struct fsi_master *master)
+{
+ if (master->dev.parent && master->dev.parent->type == &i2c_client_type)
+ return true;
+
+ return false;
+}
+
+#endif /* DRIVERS_FSI_MASTER_I2CR_H */
diff --git a/drivers/fsi/fsi-master.h b/drivers/fsi/fsi-master.h
new file mode 100644
index 000000000..967622c1c
--- /dev/null
+++ b/drivers/fsi/fsi-master.h
@@ -0,0 +1,161 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * FSI master definitions. These comprise the core <--> master interface,
+ * to allow the core to interact with the (hardware-specific) masters.
+ *
+ * Copyright (C) IBM Corporation 2016
+ */
+
+#ifndef DRIVERS_FSI_MASTER_H
+#define DRIVERS_FSI_MASTER_H
+
+#include <linux/device.h>
+#include <linux/mutex.h>
+
+/*
+ * Master registers
+ *
+ * These are used by hardware masters, such as the one in the FSP2, AST2600 and
+ * the hub master in POWER processors.
+ */
+
+/* Control Registers */
+#define FSI_MMODE 0x0 /* R/W: mode */
+#define FSI_MDLYR 0x4 /* R/W: delay */
+#define FSI_MCRSP 0x8 /* R/W: clock rate */
+#define FSI_MENP0 0x10 /* R/W: enable */
+#define FSI_MLEVP0 0x18 /* R: plug detect */
+#define FSI_MSENP0 0x18 /* S: Set enable */
+#define FSI_MCENP0 0x20 /* C: Clear enable */
+#define FSI_MAEB 0x70 /* R: Error address */
+#define FSI_MVER 0x74 /* R: master version/type */
+#define FSI_MSTAP0 0xd0 /* R: Port status */
+#define FSI_MRESP0 0xd0 /* W: Port reset */
+#define FSI_MESRB0 0x1d0 /* R: Master error status */
+#define FSI_MRESB0 0x1d0 /* W: Reset bridge */
+#define FSI_MSCSB0 0x1d4 /* R: Master sub command stack */
+#define FSI_MATRB0 0x1d8 /* R: Master address trace */
+#define FSI_MDTRB0 0x1dc /* R: Master data trace */
+#define FSI_MECTRL 0x2e0 /* W: Error control */
+
+/* MMODE: Mode control */
+#define FSI_MMODE_EIP 0x80000000 /* Enable interrupt polling */
+#define FSI_MMODE_ECRC 0x40000000 /* Enable error recovery */
+#define FSI_MMODE_RELA 0x20000000 /* Enable relative address commands */
+#define FSI_MMODE_EPC 0x10000000 /* Enable parity checking */
+#define FSI_MMODE_P8_TO_LSB 0x00000010 /* Timeout value LSB */
+ /* MSB=1, LSB=0 is 0.8 ms */
+ /* MSB=0, LSB=1 is 0.9 ms */
+#define FSI_MMODE_CRS0SHFT 18 /* Clk rate selection 0 shift */
+#define FSI_MMODE_CRS0MASK 0x3ff /* Clk rate selection 0 mask */
+#define FSI_MMODE_CRS1SHFT 8 /* Clk rate selection 1 shift */
+#define FSI_MMODE_CRS1MASK 0x3ff /* Clk rate selection 1 mask */
+
+/* MRESB: Reset bridge */
+#define FSI_MRESB_RST_GEN 0x80000000 /* General reset */
+#define FSI_MRESB_RST_ERR 0x40000000 /* Error Reset */
+
+/* MRESP: Reset port */
+#define FSI_MRESP_RST_ALL_MASTER 0x20000000 /* Reset all FSI masters */
+#define FSI_MRESP_RST_ALL_LINK 0x10000000 /* Reset all FSI port contr. */
+#define FSI_MRESP_RST_MCR 0x08000000 /* Reset FSI master reg. */
+#define FSI_MRESP_RST_PYE 0x04000000 /* Reset FSI parity error */
+#define FSI_MRESP_RST_ALL 0xfc000000 /* Reset any error */
+
+/* MECTRL: Error control */
+#define FSI_MECTRL_EOAE 0x8000 /* Enable machine check when */
+ /* master 0 in error */
+#define FSI_MECTRL_P8_AUTO_TERM 0x4000 /* Auto terminate */
+
+#define FSI_HUB_LINK_OFFSET 0x80000
+#define FSI_HUB_LINK_SIZE 0x80000
+#define FSI_HUB_MASTER_MAX_LINKS 8
+
+/*
+ * Protocol definitions
+ *
+ * These are used by low level masters that bit-bang out the protocol
+ */
+
+/* Various protocol delays */
+#define FSI_ECHO_DELAY_CLOCKS 16 /* Number clocks for echo delay */
+#define FSI_SEND_DELAY_CLOCKS 16 /* Number clocks for send delay */
+#define FSI_PRE_BREAK_CLOCKS 50 /* Number clocks to prep for break */
+#define FSI_BREAK_CLOCKS 256 /* Number of clocks to issue break */
+#define FSI_POST_BREAK_CLOCKS 16000 /* Number clocks to set up cfam */
+#define FSI_INIT_CLOCKS 5000 /* Clock out any old data */
+#define FSI_MASTER_DPOLL_CLOCKS 50 /* < 21 will cause slave to hang */
+#define FSI_MASTER_EPOLL_CLOCKS 50 /* Number of clocks for E_POLL retry */
+
+/* Various retry maximums */
+#define FSI_CRC_ERR_RETRIES 10
+#define FSI_MASTER_MAX_BUSY 200
+#define FSI_MASTER_MTOE_COUNT 1000
+
+/* Command encodings */
+#define FSI_CMD_DPOLL 0x2
+#define FSI_CMD_EPOLL 0x3
+#define FSI_CMD_TERM 0x3f
+#define FSI_CMD_ABS_AR 0x4
+#define FSI_CMD_REL_AR 0x5
+#define FSI_CMD_SAME_AR 0x3 /* but only a 2-bit opcode... */
+
+/* Slave responses */
+#define FSI_RESP_ACK 0 /* Success */
+#define FSI_RESP_BUSY 1 /* Slave busy */
+#define FSI_RESP_ERRA 2 /* Any (misc) Error */
+#define FSI_RESP_ERRC 3 /* Slave reports master CRC error */
+
+/* Misc */
+#define FSI_CRC_SIZE 4
+
+/* fsi-master definition and flags */
+#define FSI_MASTER_FLAG_SWCLOCK 0x1
+
+/*
+ * Structures and function prototypes
+ *
+ * These are common to all masters
+ */
+
+struct fsi_master {
+ struct device dev;
+ int idx;
+ int n_links;
+ int flags;
+ struct mutex scan_lock;
+ int (*read)(struct fsi_master *, int link, uint8_t id,
+ uint32_t addr, void *val, size_t size);
+ int (*write)(struct fsi_master *, int link, uint8_t id,
+ uint32_t addr, const void *val, size_t size);
+ int (*term)(struct fsi_master *, int link, uint8_t id);
+ int (*send_break)(struct fsi_master *, int link);
+ int (*link_enable)(struct fsi_master *, int link,
+ bool enable);
+ int (*link_config)(struct fsi_master *, int link,
+ u8 t_send_delay, u8 t_echo_delay);
+};
+
+#define to_fsi_master(d) container_of(d, struct fsi_master, dev)
+
+/**
+ * fsi_master registration & lifetime: the fsi_master_register() and
+ * fsi_master_unregister() functions will take ownership of the master, and
+ * ->dev in particular. The registration path performs a get_device(), which
+ * takes the first reference on the device. Similarly, the unregistration path
+ * performs a put_device(), which may well drop the last reference.
+ *
+ * This means that master implementations *may* need to hold their own
+ * reference (via get_device()) on master->dev. In particular, if the device's
+ * ->release callback frees the fsi_master, then fsi_master_unregister will
+ * invoke this free if no other reference is held.
+ *
+ * The same applies for the error path of fsi_master_register; if the call
+ * fails, dev->release will have been invoked.
+ */
+extern int fsi_master_register(struct fsi_master *master);
+extern void fsi_master_unregister(struct fsi_master *master);
+
+extern int fsi_master_rescan(struct fsi_master *master);
+
+#endif /* DRIVERS_FSI_MASTER_H */
diff --git a/drivers/fsi/fsi-occ.c b/drivers/fsi/fsi-occ.c
new file mode 100644
index 000000000..da35ca9e8
--- /dev/null
+++ b/drivers/fsi/fsi-occ.c
@@ -0,0 +1,766 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/fsi-sbefifo.h>
+#include <linux/gfp.h>
+#include <linux/idr.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/miscdevice.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/fsi-occ.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <asm/unaligned.h>
+
+#define OCC_SRAM_BYTES 4096
+#define OCC_CMD_DATA_BYTES 4090
+#define OCC_RESP_DATA_BYTES 4089
+
+#define OCC_P9_SRAM_CMD_ADDR 0xFFFBE000
+#define OCC_P9_SRAM_RSP_ADDR 0xFFFBF000
+
+#define OCC_P10_SRAM_CMD_ADDR 0xFFFFD000
+#define OCC_P10_SRAM_RSP_ADDR 0xFFFFE000
+
+#define OCC_P10_SRAM_MODE 0x58 /* Normal mode, OCB channel 2 */
+
+#define OCC_TIMEOUT_MS 1000
+#define OCC_CMD_IN_PRG_WAIT_MS 50
+
+enum versions { occ_p9, occ_p10 };
+
+struct occ {
+ struct device *dev;
+ struct device *sbefifo;
+ char name[32];
+ int idx;
+ bool platform_hwmon;
+ u8 sequence_number;
+ void *buffer;
+ void *client_buffer;
+ size_t client_buffer_size;
+ size_t client_response_size;
+ enum versions version;
+ struct miscdevice mdev;
+ struct mutex occ_lock;
+};
+
+#define to_occ(x) container_of((x), struct occ, mdev)
+
+struct occ_response {
+ u8 seq_no;
+ u8 cmd_type;
+ u8 return_status;
+ __be16 data_length;
+ u8 data[OCC_RESP_DATA_BYTES + 2]; /* two bytes checksum */
+} __packed;
+
+struct occ_client {
+ struct occ *occ;
+ struct mutex lock;
+ size_t data_size;
+ size_t read_offset;
+ u8 *buffer;
+};
+
+#define to_client(x) container_of((x), struct occ_client, xfr)
+
+static DEFINE_IDA(occ_ida);
+
+static int occ_open(struct inode *inode, struct file *file)
+{
+ struct occ_client *client = kzalloc(sizeof(*client), GFP_KERNEL);
+ struct miscdevice *mdev = file->private_data;
+ struct occ *occ = to_occ(mdev);
+
+ if (!client)
+ return -ENOMEM;
+
+ client->buffer = (u8 *)__get_free_page(GFP_KERNEL);
+ if (!client->buffer) {
+ kfree(client);
+ return -ENOMEM;
+ }
+
+ client->occ = occ;
+ mutex_init(&client->lock);
+ file->private_data = client;
+ get_device(occ->dev);
+
+ /* We allocate a 1-page buffer, make sure it all fits */
+ BUILD_BUG_ON((OCC_CMD_DATA_BYTES + 3) > PAGE_SIZE);
+ BUILD_BUG_ON((OCC_RESP_DATA_BYTES + 7) > PAGE_SIZE);
+
+ return 0;
+}
+
+static ssize_t occ_read(struct file *file, char __user *buf, size_t len,
+ loff_t *offset)
+{
+ struct occ_client *client = file->private_data;
+ ssize_t rc = 0;
+
+ if (!client)
+ return -ENODEV;
+
+ if (len > OCC_SRAM_BYTES)
+ return -EINVAL;
+
+ mutex_lock(&client->lock);
+
+ /* This should not be possible ... */
+ if (WARN_ON_ONCE(client->read_offset > client->data_size)) {
+ rc = -EIO;
+ goto done;
+ }
+
+ /* Grab how much data we have to read */
+ rc = min(len, client->data_size - client->read_offset);
+ if (copy_to_user(buf, client->buffer + client->read_offset, rc))
+ rc = -EFAULT;
+ else
+ client->read_offset += rc;
+
+ done:
+ mutex_unlock(&client->lock);
+
+ return rc;
+}
+
+static ssize_t occ_write(struct file *file, const char __user *buf,
+ size_t len, loff_t *offset)
+{
+ struct occ_client *client = file->private_data;
+ size_t rlen, data_length;
+ ssize_t rc;
+ u8 *cmd;
+
+ if (!client)
+ return -ENODEV;
+
+ if (len > (OCC_CMD_DATA_BYTES + 3) || len < 3)
+ return -EINVAL;
+
+ mutex_lock(&client->lock);
+
+ /* Construct the command */
+ cmd = client->buffer;
+
+ /*
+ * Copy the user command (assume user data follows the occ command
+ * format)
+ * byte 0: command type
+ * bytes 1-2: data length (msb first)
+ * bytes 3-n: data
+ */
+ if (copy_from_user(&cmd[1], buf, len)) {
+ rc = -EFAULT;
+ goto done;
+ }
+
+ /* Extract data length */
+ data_length = (cmd[2] << 8) + cmd[3];
+ if (data_length > OCC_CMD_DATA_BYTES) {
+ rc = -EINVAL;
+ goto done;
+ }
+
+ /* Submit command; 4 bytes before the data and 2 bytes after */
+ rlen = PAGE_SIZE;
+ rc = fsi_occ_submit(client->occ->dev, cmd, data_length + 6, cmd,
+ &rlen);
+ if (rc)
+ goto done;
+
+ /* Set read tracking data */
+ client->data_size = rlen;
+ client->read_offset = 0;
+
+ /* Done */
+ rc = len;
+
+ done:
+ mutex_unlock(&client->lock);
+
+ return rc;
+}
+
+static int occ_release(struct inode *inode, struct file *file)
+{
+ struct occ_client *client = file->private_data;
+
+ put_device(client->occ->dev);
+ free_page((unsigned long)client->buffer);
+ kfree(client);
+
+ return 0;
+}
+
+static const struct file_operations occ_fops = {
+ .owner = THIS_MODULE,
+ .open = occ_open,
+ .read = occ_read,
+ .write = occ_write,
+ .release = occ_release,
+};
+
+static void occ_save_ffdc(struct occ *occ, __be32 *resp, size_t parsed_len,
+ size_t resp_len)
+{
+ if (resp_len > parsed_len) {
+ size_t dh = resp_len - parsed_len;
+ size_t ffdc_len = (dh - 1) * 4; /* SBE words are four bytes */
+ __be32 *ffdc = &resp[parsed_len];
+
+ if (ffdc_len > occ->client_buffer_size)
+ ffdc_len = occ->client_buffer_size;
+
+ memcpy(occ->client_buffer, ffdc, ffdc_len);
+ occ->client_response_size = ffdc_len;
+ }
+}
+
+static int occ_verify_checksum(struct occ *occ, struct occ_response *resp,
+ u16 data_length)
+{
+ /* Fetch the two bytes after the data for the checksum. */
+ u16 checksum_resp = get_unaligned_be16(&resp->data[data_length]);
+ u16 checksum;
+ u16 i;
+
+ checksum = resp->seq_no;
+ checksum += resp->cmd_type;
+ checksum += resp->return_status;
+ checksum += (data_length >> 8) + (data_length & 0xFF);
+
+ for (i = 0; i < data_length; ++i)
+ checksum += resp->data[i];
+
+ if (checksum != checksum_resp) {
+ dev_err(occ->dev, "Bad checksum: %04x!=%04x\n", checksum,
+ checksum_resp);
+ return -EBADE;
+ }
+
+ return 0;
+}
+
+static int occ_getsram(struct occ *occ, u32 offset, void *data, ssize_t len)
+{
+ u32 data_len = ((len + 7) / 8) * 8; /* must be multiples of 8 B */
+ size_t cmd_len, parsed_len, resp_data_len;
+ size_t resp_len = OCC_MAX_RESP_WORDS;
+ __be32 *resp = occ->buffer;
+ __be32 cmd[6];
+ int idx = 0, rc;
+
+ /*
+ * Magic sequence to do SBE getsram command. SBE will fetch data from
+ * specified SRAM address.
+ */
+ switch (occ->version) {
+ default:
+ case occ_p9:
+ cmd_len = 5;
+ cmd[2] = cpu_to_be32(1); /* Normal mode */
+ cmd[3] = cpu_to_be32(OCC_P9_SRAM_RSP_ADDR + offset);
+ break;
+ case occ_p10:
+ idx = 1;
+ cmd_len = 6;
+ cmd[2] = cpu_to_be32(OCC_P10_SRAM_MODE);
+ cmd[3] = 0;
+ cmd[4] = cpu_to_be32(OCC_P10_SRAM_RSP_ADDR + offset);
+ break;
+ }
+
+ cmd[0] = cpu_to_be32(cmd_len);
+ cmd[1] = cpu_to_be32(SBEFIFO_CMD_GET_OCC_SRAM);
+ cmd[4 + idx] = cpu_to_be32(data_len);
+
+ rc = sbefifo_submit(occ->sbefifo, cmd, cmd_len, resp, &resp_len);
+ if (rc)
+ return rc;
+
+ rc = sbefifo_parse_status(occ->sbefifo, SBEFIFO_CMD_GET_OCC_SRAM,
+ resp, resp_len, &parsed_len);
+ if (rc > 0) {
+ dev_err(occ->dev, "SRAM read returned failure status: %08x\n",
+ rc);
+ occ_save_ffdc(occ, resp, parsed_len, resp_len);
+ return -ECOMM;
+ } else if (rc) {
+ return rc;
+ }
+
+ resp_data_len = be32_to_cpu(resp[parsed_len - 1]);
+ if (resp_data_len != data_len) {
+ dev_err(occ->dev, "SRAM read expected %d bytes got %zd\n",
+ data_len, resp_data_len);
+ rc = -EBADMSG;
+ } else {
+ memcpy(data, resp, len);
+ }
+
+ return rc;
+}
+
+static int occ_putsram(struct occ *occ, const void *data, ssize_t len,
+ u8 seq_no, u16 checksum)
+{
+ u32 data_len = ((len + 7) / 8) * 8; /* must be multiples of 8 B */
+ size_t cmd_len, parsed_len, resp_data_len;
+ size_t resp_len = OCC_MAX_RESP_WORDS;
+ __be32 *buf = occ->buffer;
+ u8 *byte_buf;
+ int idx = 0, rc;
+
+ cmd_len = (occ->version == occ_p10) ? 6 : 5;
+ cmd_len += data_len >> 2;
+
+ /*
+ * Magic sequence to do SBE putsram command. SBE will transfer
+ * data to specified SRAM address.
+ */
+ buf[0] = cpu_to_be32(cmd_len);
+ buf[1] = cpu_to_be32(SBEFIFO_CMD_PUT_OCC_SRAM);
+
+ switch (occ->version) {
+ default:
+ case occ_p9:
+ buf[2] = cpu_to_be32(1); /* Normal mode */
+ buf[3] = cpu_to_be32(OCC_P9_SRAM_CMD_ADDR);
+ break;
+ case occ_p10:
+ idx = 1;
+ buf[2] = cpu_to_be32(OCC_P10_SRAM_MODE);
+ buf[3] = 0;
+ buf[4] = cpu_to_be32(OCC_P10_SRAM_CMD_ADDR);
+ break;
+ }
+
+ buf[4 + idx] = cpu_to_be32(data_len);
+ memcpy(&buf[5 + idx], data, len);
+
+ byte_buf = (u8 *)&buf[5 + idx];
+ /*
+ * Overwrite the first byte with our sequence number and the last two
+ * bytes with the checksum.
+ */
+ byte_buf[0] = seq_no;
+ byte_buf[len - 2] = checksum >> 8;
+ byte_buf[len - 1] = checksum & 0xff;
+
+ rc = sbefifo_submit(occ->sbefifo, buf, cmd_len, buf, &resp_len);
+ if (rc)
+ return rc;
+
+ rc = sbefifo_parse_status(occ->sbefifo, SBEFIFO_CMD_PUT_OCC_SRAM,
+ buf, resp_len, &parsed_len);
+ if (rc > 0) {
+ dev_err(occ->dev, "SRAM write returned failure status: %08x\n",
+ rc);
+ occ_save_ffdc(occ, buf, parsed_len, resp_len);
+ return -ECOMM;
+ } else if (rc) {
+ return rc;
+ }
+
+ if (parsed_len != 1) {
+ dev_err(occ->dev, "SRAM write response length invalid: %zd\n",
+ parsed_len);
+ rc = -EBADMSG;
+ } else {
+ resp_data_len = be32_to_cpu(buf[0]);
+ if (resp_data_len != data_len) {
+ dev_err(occ->dev,
+ "SRAM write expected %d bytes got %zd\n",
+ data_len, resp_data_len);
+ rc = -EBADMSG;
+ }
+ }
+
+ return rc;
+}
+
+static int occ_trigger_attn(struct occ *occ)
+{
+ __be32 *buf = occ->buffer;
+ size_t cmd_len, parsed_len, resp_data_len;
+ size_t resp_len = OCC_MAX_RESP_WORDS;
+ int idx = 0, rc;
+
+ switch (occ->version) {
+ default:
+ case occ_p9:
+ cmd_len = 7;
+ buf[2] = cpu_to_be32(3); /* Circular mode */
+ buf[3] = 0;
+ break;
+ case occ_p10:
+ idx = 1;
+ cmd_len = 8;
+ buf[2] = cpu_to_be32(0xd0); /* Circular mode, OCB Channel 1 */
+ buf[3] = 0;
+ buf[4] = 0;
+ break;
+ }
+
+ buf[0] = cpu_to_be32(cmd_len); /* Chip-op length in words */
+ buf[1] = cpu_to_be32(SBEFIFO_CMD_PUT_OCC_SRAM);
+ buf[4 + idx] = cpu_to_be32(8); /* Data length in bytes */
+ buf[5 + idx] = cpu_to_be32(0x20010000); /* Trigger OCC attention */
+ buf[6 + idx] = 0;
+
+ rc = sbefifo_submit(occ->sbefifo, buf, cmd_len, buf, &resp_len);
+ if (rc)
+ return rc;
+
+ rc = sbefifo_parse_status(occ->sbefifo, SBEFIFO_CMD_PUT_OCC_SRAM,
+ buf, resp_len, &parsed_len);
+ if (rc > 0) {
+ dev_err(occ->dev, "SRAM attn returned failure status: %08x\n",
+ rc);
+ occ_save_ffdc(occ, buf, parsed_len, resp_len);
+ return -ECOMM;
+ } else if (rc) {
+ return rc;
+ }
+
+ if (parsed_len != 1) {
+ dev_err(occ->dev, "SRAM attn response length invalid: %zd\n",
+ parsed_len);
+ rc = -EBADMSG;
+ } else {
+ resp_data_len = be32_to_cpu(buf[0]);
+ if (resp_data_len != 8) {
+ dev_err(occ->dev,
+ "SRAM attn expected 8 bytes got %zd\n",
+ resp_data_len);
+ rc = -EBADMSG;
+ }
+ }
+
+ return rc;
+}
+
+static bool fsi_occ_response_not_ready(struct occ_response *resp, u8 seq_no,
+ u8 cmd_type)
+{
+ return resp->return_status == OCC_RESP_CMD_IN_PRG ||
+ resp->return_status == OCC_RESP_CRIT_INIT ||
+ resp->seq_no != seq_no || resp->cmd_type != cmd_type;
+}
+
+int fsi_occ_submit(struct device *dev, const void *request, size_t req_len,
+ void *response, size_t *resp_len)
+{
+ const unsigned long timeout = msecs_to_jiffies(OCC_TIMEOUT_MS);
+ const unsigned long wait_time =
+ msecs_to_jiffies(OCC_CMD_IN_PRG_WAIT_MS);
+ struct occ *occ = dev_get_drvdata(dev);
+ struct occ_response *resp = response;
+ size_t user_resp_len = *resp_len;
+ u8 seq_no;
+ u8 cmd_type;
+ u16 checksum = 0;
+ u16 resp_data_length;
+ const u8 *byte_request = (const u8 *)request;
+ unsigned long end;
+ int rc;
+ size_t i;
+
+ *resp_len = 0;
+
+ if (!occ)
+ return -ENODEV;
+
+ if (user_resp_len < 7) {
+ dev_dbg(dev, "Bad resplen %zd\n", user_resp_len);
+ return -EINVAL;
+ }
+
+ cmd_type = byte_request[1];
+
+ /* Checksum the request, ignoring first byte (sequence number). */
+ for (i = 1; i < req_len - 2; ++i)
+ checksum += byte_request[i];
+
+ rc = mutex_lock_interruptible(&occ->occ_lock);
+ if (rc)
+ return rc;
+
+ occ->client_buffer = response;
+ occ->client_buffer_size = user_resp_len;
+ occ->client_response_size = 0;
+
+ if (!occ->buffer) {
+ rc = -ENOENT;
+ goto done;
+ }
+
+ /*
+ * Get a sequence number and update the counter. Avoid a sequence
+ * number of 0 which would pass the response check below even if the
+ * OCC response is uninitialized. Any sequence number the user is
+ * trying to send is overwritten since this function is the only common
+ * interface to the OCC and therefore the only place we can guarantee
+ * unique sequence numbers.
+ */
+ seq_no = occ->sequence_number++;
+ if (!occ->sequence_number)
+ occ->sequence_number = 1;
+ checksum += seq_no;
+
+ rc = occ_putsram(occ, request, req_len, seq_no, checksum);
+ if (rc)
+ goto done;
+
+ rc = occ_trigger_attn(occ);
+ if (rc)
+ goto done;
+
+ end = jiffies + timeout;
+ while (true) {
+ /* Read occ response header */
+ rc = occ_getsram(occ, 0, resp, 8);
+ if (rc)
+ goto done;
+
+ if (fsi_occ_response_not_ready(resp, seq_no, cmd_type)) {
+ if (time_after(jiffies, end)) {
+ dev_err(occ->dev,
+ "resp timeout status=%02x seq=%d cmd=%d, our seq=%d cmd=%d\n",
+ resp->return_status, resp->seq_no,
+ resp->cmd_type, seq_no, cmd_type);
+ rc = -ETIMEDOUT;
+ goto done;
+ }
+
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(wait_time);
+ } else {
+ /* Extract size of response data */
+ resp_data_length =
+ get_unaligned_be16(&resp->data_length);
+
+ /*
+ * Message size is data length + 5 bytes header + 2
+ * bytes checksum
+ */
+ if ((resp_data_length + 7) > user_resp_len) {
+ rc = -EMSGSIZE;
+ goto done;
+ }
+
+ /*
+ * Get the entire response including the header again,
+ * in case it changed
+ */
+ if (resp_data_length > 1) {
+ rc = occ_getsram(occ, 0, resp,
+ resp_data_length + 7);
+ if (rc)
+ goto done;
+
+ if (!fsi_occ_response_not_ready(resp, seq_no,
+ cmd_type))
+ break;
+ } else {
+ break;
+ }
+ }
+ }
+
+ dev_dbg(dev, "resp_status=%02x resp_data_len=%d\n",
+ resp->return_status, resp_data_length);
+
+ rc = occ_verify_checksum(occ, resp, resp_data_length);
+ if (rc)
+ goto done;
+
+ occ->client_response_size = resp_data_length + 7;
+
+ done:
+ *resp_len = occ->client_response_size;
+ mutex_unlock(&occ->occ_lock);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(fsi_occ_submit);
+
+static int occ_unregister_platform_child(struct device *dev, void *data)
+{
+ struct platform_device *hwmon_dev = to_platform_device(dev);
+
+ platform_device_unregister(hwmon_dev);
+
+ return 0;
+}
+
+static int occ_unregister_of_child(struct device *dev, void *data)
+{
+ struct platform_device *hwmon_dev = to_platform_device(dev);
+
+ of_device_unregister(hwmon_dev);
+ if (dev->of_node)
+ of_node_clear_flag(dev->of_node, OF_POPULATED);
+
+ return 0;
+}
+
+static int occ_probe(struct platform_device *pdev)
+{
+ int rc;
+ u32 reg;
+ char child_name[32];
+ struct occ *occ;
+ struct platform_device *hwmon_dev = NULL;
+ struct device_node *hwmon_node;
+ struct device *dev = &pdev->dev;
+ struct platform_device_info hwmon_dev_info = {
+ .parent = dev,
+ .name = "occ-hwmon",
+ };
+
+ occ = devm_kzalloc(dev, sizeof(*occ), GFP_KERNEL);
+ if (!occ)
+ return -ENOMEM;
+
+ /* SBE words are always four bytes */
+ occ->buffer = kvmalloc(OCC_MAX_RESP_WORDS * 4, GFP_KERNEL);
+ if (!occ->buffer)
+ return -ENOMEM;
+
+ occ->version = (uintptr_t)of_device_get_match_data(dev);
+ occ->dev = dev;
+ occ->sbefifo = dev->parent;
+ /*
+ * Quickly derive a pseudo-random number from jiffies so that
+ * re-probing the driver doesn't accidentally overlap sequence numbers.
+ */
+ occ->sequence_number = (u8)((jiffies % 0xff) + 1);
+ mutex_init(&occ->occ_lock);
+
+ if (dev->of_node) {
+ rc = of_property_read_u32(dev->of_node, "reg", &reg);
+ if (!rc) {
+ /* make sure we don't have a duplicate from dts */
+ occ->idx = ida_simple_get(&occ_ida, reg, reg + 1,
+ GFP_KERNEL);
+ if (occ->idx < 0)
+ occ->idx = ida_simple_get(&occ_ida, 1, INT_MAX,
+ GFP_KERNEL);
+ } else {
+ occ->idx = ida_simple_get(&occ_ida, 1, INT_MAX,
+ GFP_KERNEL);
+ }
+ } else {
+ occ->idx = ida_simple_get(&occ_ida, 1, INT_MAX, GFP_KERNEL);
+ }
+
+ platform_set_drvdata(pdev, occ);
+
+ snprintf(occ->name, sizeof(occ->name), "occ%d", occ->idx);
+ occ->mdev.fops = &occ_fops;
+ occ->mdev.minor = MISC_DYNAMIC_MINOR;
+ occ->mdev.name = occ->name;
+ occ->mdev.parent = dev;
+
+ rc = misc_register(&occ->mdev);
+ if (rc) {
+ dev_err(dev, "failed to register miscdevice: %d\n", rc);
+ ida_simple_remove(&occ_ida, occ->idx);
+ kvfree(occ->buffer);
+ return rc;
+ }
+
+ hwmon_node = of_get_child_by_name(dev->of_node, hwmon_dev_info.name);
+ if (hwmon_node) {
+ snprintf(child_name, sizeof(child_name), "%s.%d", hwmon_dev_info.name, occ->idx);
+ hwmon_dev = of_platform_device_create(hwmon_node, child_name, dev);
+ of_node_put(hwmon_node);
+ }
+
+ if (!hwmon_dev) {
+ occ->platform_hwmon = true;
+ hwmon_dev_info.id = occ->idx;
+ hwmon_dev = platform_device_register_full(&hwmon_dev_info);
+ if (IS_ERR(hwmon_dev))
+ dev_warn(dev, "failed to create hwmon device\n");
+ }
+
+ return 0;
+}
+
+static int occ_remove(struct platform_device *pdev)
+{
+ struct occ *occ = platform_get_drvdata(pdev);
+
+ misc_deregister(&occ->mdev);
+
+ mutex_lock(&occ->occ_lock);
+ kvfree(occ->buffer);
+ occ->buffer = NULL;
+ mutex_unlock(&occ->occ_lock);
+
+ if (occ->platform_hwmon)
+ device_for_each_child(&pdev->dev, NULL, occ_unregister_platform_child);
+ else
+ device_for_each_child(&pdev->dev, NULL, occ_unregister_of_child);
+
+ ida_simple_remove(&occ_ida, occ->idx);
+
+ return 0;
+}
+
+static const struct of_device_id occ_match[] = {
+ {
+ .compatible = "ibm,p9-occ",
+ .data = (void *)occ_p9
+ },
+ {
+ .compatible = "ibm,p10-occ",
+ .data = (void *)occ_p10
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, occ_match);
+
+static struct platform_driver occ_driver = {
+ .driver = {
+ .name = "occ",
+ .of_match_table = occ_match,
+ },
+ .probe = occ_probe,
+ .remove = occ_remove,
+};
+
+static int occ_init(void)
+{
+ return platform_driver_register(&occ_driver);
+}
+
+static void occ_exit(void)
+{
+ platform_driver_unregister(&occ_driver);
+
+ ida_destroy(&occ_ida);
+}
+
+module_init(occ_init);
+module_exit(occ_exit);
+
+MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>");
+MODULE_DESCRIPTION("BMC P9 OCC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/fsi/fsi-sbefifo.c b/drivers/fsi/fsi-sbefifo.c
new file mode 100644
index 000000000..0a98517f3
--- /dev/null
+++ b/drivers/fsi/fsi-sbefifo.c
@@ -0,0 +1,1159 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) IBM Corporation 2017
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERGCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/fsi.h>
+#include <linux/fsi-sbefifo.h>
+#include <linux/kernel.h>
+#include <linux/cdev.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/delay.h>
+#include <linux/uio.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
+
+#include <uapi/linux/fsi.h>
+
+/*
+ * The SBEFIFO is a pipe-like FSI device for communicating with
+ * the self boot engine on POWER processors.
+ */
+
+#define DEVICE_NAME "sbefifo"
+#define FSI_ENGID_SBE 0x22
+
+/*
+ * Register layout
+ */
+
+/* Register banks */
+#define SBEFIFO_UP 0x00 /* FSI -> Host */
+#define SBEFIFO_DOWN 0x40 /* Host -> FSI */
+
+/* Per-bank registers */
+#define SBEFIFO_FIFO 0x00 /* The FIFO itself */
+#define SBEFIFO_STS 0x04 /* Status register */
+#define SBEFIFO_STS_PARITY_ERR 0x20000000
+#define SBEFIFO_STS_RESET_REQ 0x02000000
+#define SBEFIFO_STS_GOT_EOT 0x00800000
+#define SBEFIFO_STS_MAX_XFER_LIMIT 0x00400000
+#define SBEFIFO_STS_FULL 0x00200000
+#define SBEFIFO_STS_EMPTY 0x00100000
+#define SBEFIFO_STS_ECNT_MASK 0x000f0000
+#define SBEFIFO_STS_ECNT_SHIFT 16
+#define SBEFIFO_STS_VALID_MASK 0x0000ff00
+#define SBEFIFO_STS_VALID_SHIFT 8
+#define SBEFIFO_STS_EOT_MASK 0x000000ff
+#define SBEFIFO_STS_EOT_SHIFT 0
+#define SBEFIFO_EOT_RAISE 0x08 /* (Up only) Set End Of Transfer */
+#define SBEFIFO_REQ_RESET 0x0C /* (Up only) Reset Request */
+#define SBEFIFO_PERFORM_RESET 0x10 /* (Down only) Perform Reset */
+#define SBEFIFO_EOT_ACK 0x14 /* (Down only) Acknowledge EOT */
+#define SBEFIFO_DOWN_MAX 0x18 /* (Down only) Max transfer */
+
+/* CFAM GP Mailbox SelfBoot Message register */
+#define CFAM_GP_MBOX_SBM_ADDR 0x2824 /* Converted 0x2809 */
+
+#define CFAM_SBM_SBE_BOOTED 0x80000000
+#define CFAM_SBM_SBE_ASYNC_FFDC 0x40000000
+#define CFAM_SBM_SBE_STATE_MASK 0x00f00000
+#define CFAM_SBM_SBE_STATE_SHIFT 20
+
+enum sbe_state
+{
+ SBE_STATE_UNKNOWN = 0x0, // Unknown, initial state
+ SBE_STATE_IPLING = 0x1, // IPL'ing - autonomous mode (transient)
+ SBE_STATE_ISTEP = 0x2, // ISTEP - Running IPL by steps (transient)
+ SBE_STATE_MPIPL = 0x3, // MPIPL
+ SBE_STATE_RUNTIME = 0x4, // SBE Runtime
+ SBE_STATE_DMT = 0x5, // Dead Man Timer State (transient)
+ SBE_STATE_DUMP = 0x6, // Dumping
+ SBE_STATE_FAILURE = 0x7, // Internal SBE failure
+ SBE_STATE_QUIESCE = 0x8, // Final state - needs SBE reset to get out
+};
+
+/* FIFO depth */
+#define SBEFIFO_FIFO_DEPTH 8
+
+/* Helpers */
+#define sbefifo_empty(sts) ((sts) & SBEFIFO_STS_EMPTY)
+#define sbefifo_full(sts) ((sts) & SBEFIFO_STS_FULL)
+#define sbefifo_parity_err(sts) ((sts) & SBEFIFO_STS_PARITY_ERR)
+#define sbefifo_populated(sts) (((sts) & SBEFIFO_STS_ECNT_MASK) >> SBEFIFO_STS_ECNT_SHIFT)
+#define sbefifo_vacant(sts) (SBEFIFO_FIFO_DEPTH - sbefifo_populated(sts))
+#define sbefifo_eot_set(sts) (((sts) & SBEFIFO_STS_EOT_MASK) >> SBEFIFO_STS_EOT_SHIFT)
+
+/* Reset request timeout in ms */
+#define SBEFIFO_RESET_TIMEOUT 10000
+
+/* Timeouts for commands in ms */
+#define SBEFIFO_TIMEOUT_START_CMD 10000
+#define SBEFIFO_TIMEOUT_IN_CMD 1000
+#define SBEFIFO_TIMEOUT_START_RSP 10000
+#define SBEFIFO_TIMEOUT_IN_RSP 1000
+
+/* Other constants */
+#define SBEFIFO_MAX_USER_CMD_LEN (0x100000 + PAGE_SIZE)
+#define SBEFIFO_RESET_MAGIC 0x52534554 /* "RSET" */
+
+struct sbefifo {
+ uint32_t magic;
+#define SBEFIFO_MAGIC 0x53424546 /* "SBEF" */
+ struct fsi_device *fsi_dev;
+ struct device dev;
+ struct cdev cdev;
+ struct mutex lock;
+ bool broken;
+ bool dead;
+ bool async_ffdc;
+ bool timed_out;
+ u32 timeout_in_cmd_ms;
+ u32 timeout_start_rsp_ms;
+};
+
+struct sbefifo_user {
+ struct sbefifo *sbefifo;
+ struct mutex file_lock;
+ void *cmd_page;
+ void *pending_cmd;
+ size_t pending_len;
+ u32 cmd_timeout_ms;
+ u32 read_timeout_ms;
+};
+
+static DEFINE_MUTEX(sbefifo_ffdc_mutex);
+
+static ssize_t timeout_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sbefifo *sbefifo = container_of(dev, struct sbefifo, dev);
+
+ return sysfs_emit(buf, "%d\n", sbefifo->timed_out ? 1 : 0);
+}
+static DEVICE_ATTR_RO(timeout);
+
+static void __sbefifo_dump_ffdc(struct device *dev, const __be32 *ffdc,
+ size_t ffdc_sz, bool internal)
+{
+ int pack = 0;
+#define FFDC_LSIZE 60
+ static char ffdc_line[FFDC_LSIZE];
+ char *p = ffdc_line;
+
+ while (ffdc_sz) {
+ u32 w0, w1, w2, i;
+ if (ffdc_sz < 3) {
+ dev_err(dev, "SBE invalid FFDC package size %zd\n", ffdc_sz);
+ return;
+ }
+ w0 = be32_to_cpu(*(ffdc++));
+ w1 = be32_to_cpu(*(ffdc++));
+ w2 = be32_to_cpu(*(ffdc++));
+ ffdc_sz -= 3;
+ if ((w0 >> 16) != 0xFFDC) {
+ dev_err(dev, "SBE invalid FFDC package signature %08x %08x %08x\n",
+ w0, w1, w2);
+ break;
+ }
+ w0 &= 0xffff;
+ if (w0 > ffdc_sz) {
+ dev_err(dev, "SBE FFDC package len %d words but only %zd remaining\n",
+ w0, ffdc_sz);
+ w0 = ffdc_sz;
+ break;
+ }
+ if (internal) {
+ dev_warn(dev, "+---- SBE FFDC package %d for async err -----+\n",
+ pack++);
+ } else {
+ dev_warn(dev, "+---- SBE FFDC package %d for cmd %02x:%02x -----+\n",
+ pack++, (w1 >> 8) & 0xff, w1 & 0xff);
+ }
+ dev_warn(dev, "| Response code: %08x |\n", w2);
+ dev_warn(dev, "|-------------------------------------------|\n");
+ for (i = 0; i < w0; i++) {
+ if ((i & 3) == 0) {
+ p = ffdc_line;
+ p += sprintf(p, "| %04x:", i << 4);
+ }
+ p += sprintf(p, " %08x", be32_to_cpu(*(ffdc++)));
+ ffdc_sz--;
+ if ((i & 3) == 3 || i == (w0 - 1)) {
+ while ((i & 3) < 3) {
+ p += sprintf(p, " ");
+ i++;
+ }
+ dev_warn(dev, "%s |\n", ffdc_line);
+ }
+ }
+ dev_warn(dev, "+-------------------------------------------+\n");
+ }
+}
+
+static void sbefifo_dump_ffdc(struct device *dev, const __be32 *ffdc,
+ size_t ffdc_sz, bool internal)
+{
+ mutex_lock(&sbefifo_ffdc_mutex);
+ __sbefifo_dump_ffdc(dev, ffdc, ffdc_sz, internal);
+ mutex_unlock(&sbefifo_ffdc_mutex);
+}
+
+int sbefifo_parse_status(struct device *dev, u16 cmd, __be32 *response,
+ size_t resp_len, size_t *data_len)
+{
+ u32 dh, s0, s1;
+ size_t ffdc_sz;
+
+ if (resp_len < 3) {
+ pr_debug("sbefifo: cmd %04x, response too small: %zd\n",
+ cmd, resp_len);
+ return -ENXIO;
+ }
+ dh = be32_to_cpu(response[resp_len - 1]);
+ if (dh > resp_len || dh < 3) {
+ dev_err(dev, "SBE cmd %02x:%02x status offset out of range: %d/%zd\n",
+ cmd >> 8, cmd & 0xff, dh, resp_len);
+ return -ENXIO;
+ }
+ s0 = be32_to_cpu(response[resp_len - dh]);
+ s1 = be32_to_cpu(response[resp_len - dh + 1]);
+ if (((s0 >> 16) != 0xC0DE) || ((s0 & 0xffff) != cmd)) {
+ dev_err(dev, "SBE cmd %02x:%02x, status signature invalid: 0x%08x 0x%08x\n",
+ cmd >> 8, cmd & 0xff, s0, s1);
+ return -ENXIO;
+ }
+ if (s1 != 0) {
+ ffdc_sz = dh - 3;
+ dev_warn(dev, "SBE error cmd %02x:%02x status=%04x:%04x\n",
+ cmd >> 8, cmd & 0xff, s1 >> 16, s1 & 0xffff);
+ if (ffdc_sz)
+ sbefifo_dump_ffdc(dev, &response[resp_len - dh + 2],
+ ffdc_sz, false);
+ }
+ if (data_len)
+ *data_len = resp_len - dh;
+
+ /*
+ * Primary status don't have the top bit set, so can't be confused with
+ * Linux negative error codes, so return the status word whole.
+ */
+ return s1;
+}
+EXPORT_SYMBOL_GPL(sbefifo_parse_status);
+
+static int sbefifo_regr(struct sbefifo *sbefifo, int reg, u32 *word)
+{
+ __be32 raw_word;
+ int rc;
+
+ rc = fsi_device_read(sbefifo->fsi_dev, reg, &raw_word,
+ sizeof(raw_word));
+ if (rc)
+ return rc;
+
+ *word = be32_to_cpu(raw_word);
+
+ return 0;
+}
+
+static int sbefifo_regw(struct sbefifo *sbefifo, int reg, u32 word)
+{
+ __be32 raw_word = cpu_to_be32(word);
+
+ return fsi_device_write(sbefifo->fsi_dev, reg, &raw_word,
+ sizeof(raw_word));
+}
+
+static int sbefifo_check_sbe_state(struct sbefifo *sbefifo)
+{
+ __be32 raw_word;
+ u32 sbm;
+ int rc;
+
+ rc = fsi_slave_read(sbefifo->fsi_dev->slave, CFAM_GP_MBOX_SBM_ADDR,
+ &raw_word, sizeof(raw_word));
+ if (rc)
+ return rc;
+ sbm = be32_to_cpu(raw_word);
+
+ /* SBE booted at all ? */
+ if (!(sbm & CFAM_SBM_SBE_BOOTED))
+ return -ESHUTDOWN;
+
+ /* Check its state */
+ switch ((sbm & CFAM_SBM_SBE_STATE_MASK) >> CFAM_SBM_SBE_STATE_SHIFT) {
+ case SBE_STATE_UNKNOWN:
+ return -ESHUTDOWN;
+ case SBE_STATE_DMT:
+ return -EBUSY;
+ case SBE_STATE_IPLING:
+ case SBE_STATE_ISTEP:
+ case SBE_STATE_MPIPL:
+ case SBE_STATE_RUNTIME:
+ case SBE_STATE_DUMP: /* Not sure about that one */
+ break;
+ case SBE_STATE_FAILURE:
+ case SBE_STATE_QUIESCE:
+ return -ESHUTDOWN;
+ }
+
+ /* Is there async FFDC available ? Remember it */
+ if (sbm & CFAM_SBM_SBE_ASYNC_FFDC)
+ sbefifo->async_ffdc = true;
+
+ return 0;
+}
+
+/* Don't flip endianness of data to/from FIFO, just pass through. */
+static int sbefifo_down_read(struct sbefifo *sbefifo, __be32 *word)
+{
+ return fsi_device_read(sbefifo->fsi_dev, SBEFIFO_DOWN, word,
+ sizeof(*word));
+}
+
+static int sbefifo_up_write(struct sbefifo *sbefifo, __be32 word)
+{
+ return fsi_device_write(sbefifo->fsi_dev, SBEFIFO_UP, &word,
+ sizeof(word));
+}
+
+static int sbefifo_request_reset(struct sbefifo *sbefifo)
+{
+ struct device *dev = &sbefifo->fsi_dev->dev;
+ unsigned long end_time;
+ u32 status;
+ int rc;
+
+ dev_dbg(dev, "Requesting FIFO reset\n");
+
+ /* Mark broken first, will be cleared if reset succeeds */
+ sbefifo->broken = true;
+
+ /* Send reset request */
+ rc = sbefifo_regw(sbefifo, SBEFIFO_UP | SBEFIFO_REQ_RESET, 1);
+ if (rc) {
+ dev_err(dev, "Sending reset request failed, rc=%d\n", rc);
+ return rc;
+ }
+
+ /* Wait for it to complete */
+ end_time = jiffies + msecs_to_jiffies(SBEFIFO_RESET_TIMEOUT);
+ while (!time_after(jiffies, end_time)) {
+ rc = sbefifo_regr(sbefifo, SBEFIFO_UP | SBEFIFO_STS, &status);
+ if (rc) {
+ dev_err(dev, "Failed to read UP fifo status during reset"
+ " , rc=%d\n", rc);
+ return rc;
+ }
+
+ if (!(status & SBEFIFO_STS_RESET_REQ)) {
+ dev_dbg(dev, "FIFO reset done\n");
+ sbefifo->broken = false;
+ return 0;
+ }
+
+ cond_resched();
+ }
+ dev_err(dev, "FIFO reset timed out\n");
+
+ return -ETIMEDOUT;
+}
+
+static int sbefifo_cleanup_hw(struct sbefifo *sbefifo)
+{
+ struct device *dev = &sbefifo->fsi_dev->dev;
+ u32 up_status, down_status;
+ bool need_reset = false;
+ int rc;
+
+ rc = sbefifo_check_sbe_state(sbefifo);
+ if (rc) {
+ dev_dbg(dev, "SBE state=%d\n", rc);
+ return rc;
+ }
+
+ /* If broken, we don't need to look at status, go straight to reset */
+ if (sbefifo->broken)
+ goto do_reset;
+
+ rc = sbefifo_regr(sbefifo, SBEFIFO_UP | SBEFIFO_STS, &up_status);
+ if (rc) {
+ dev_err(dev, "Cleanup: Reading UP status failed, rc=%d\n", rc);
+
+ /* Will try reset again on next attempt at using it */
+ sbefifo->broken = true;
+ return rc;
+ }
+
+ rc = sbefifo_regr(sbefifo, SBEFIFO_DOWN | SBEFIFO_STS, &down_status);
+ if (rc) {
+ dev_err(dev, "Cleanup: Reading DOWN status failed, rc=%d\n", rc);
+
+ /* Will try reset again on next attempt at using it */
+ sbefifo->broken = true;
+ return rc;
+ }
+
+ /* The FIFO already contains a reset request from the SBE ? */
+ if (down_status & SBEFIFO_STS_RESET_REQ) {
+ dev_info(dev, "Cleanup: FIFO reset request set, resetting\n");
+ rc = sbefifo_regw(sbefifo, SBEFIFO_DOWN, SBEFIFO_PERFORM_RESET);
+ if (rc) {
+ sbefifo->broken = true;
+ dev_err(dev, "Cleanup: Reset reg write failed, rc=%d\n", rc);
+ return rc;
+ }
+ sbefifo->broken = false;
+ return 0;
+ }
+
+ /* Parity error on either FIFO ? */
+ if ((up_status | down_status) & SBEFIFO_STS_PARITY_ERR)
+ need_reset = true;
+
+ /* Either FIFO not empty ? */
+ if (!((up_status & down_status) & SBEFIFO_STS_EMPTY))
+ need_reset = true;
+
+ if (!need_reset)
+ return 0;
+
+ dev_info(dev, "Cleanup: FIFO not clean (up=0x%08x down=0x%08x)\n",
+ up_status, down_status);
+
+ do_reset:
+
+ /* Mark broken, will be cleared if/when reset succeeds */
+ return sbefifo_request_reset(sbefifo);
+}
+
+static int sbefifo_wait(struct sbefifo *sbefifo, bool up,
+ u32 *status, unsigned long timeout)
+{
+ struct device *dev = &sbefifo->fsi_dev->dev;
+ unsigned long end_time;
+ bool ready = false;
+ u32 addr, sts = 0;
+ int rc;
+
+ dev_vdbg(dev, "Wait on %s fifo...\n", up ? "up" : "down");
+
+ addr = (up ? SBEFIFO_UP : SBEFIFO_DOWN) | SBEFIFO_STS;
+
+ end_time = jiffies + timeout;
+ while (!time_after(jiffies, end_time)) {
+ cond_resched();
+ rc = sbefifo_regr(sbefifo, addr, &sts);
+ if (rc < 0) {
+ dev_err(dev, "FSI error %d reading status register\n", rc);
+ return rc;
+ }
+ if (!up && sbefifo_parity_err(sts)) {
+ dev_err(dev, "Parity error in DOWN FIFO\n");
+ return -ENXIO;
+ }
+ ready = !(up ? sbefifo_full(sts) : sbefifo_empty(sts));
+ if (ready)
+ break;
+ }
+ if (!ready) {
+ sysfs_notify(&sbefifo->dev.kobj, NULL, dev_attr_timeout.attr.name);
+ sbefifo->timed_out = true;
+ dev_err(dev, "%s FIFO Timeout (%u ms)! status=%08x\n",
+ up ? "UP" : "DOWN", jiffies_to_msecs(timeout), sts);
+ return -ETIMEDOUT;
+ }
+ dev_vdbg(dev, "End of wait status: %08x\n", sts);
+
+ sbefifo->timed_out = false;
+ *status = sts;
+
+ return 0;
+}
+
+static int sbefifo_send_command(struct sbefifo *sbefifo,
+ const __be32 *command, size_t cmd_len)
+{
+ struct device *dev = &sbefifo->fsi_dev->dev;
+ size_t len, chunk, vacant = 0, remaining = cmd_len;
+ unsigned long timeout;
+ u32 status;
+ int rc;
+
+ dev_dbg(dev, "sending command (%zd words, cmd=%04x)\n",
+ cmd_len, be32_to_cpu(command[1]));
+
+ /* As long as there's something to send */
+ timeout = msecs_to_jiffies(SBEFIFO_TIMEOUT_START_CMD);
+ while (remaining) {
+ /* Wait for room in the FIFO */
+ rc = sbefifo_wait(sbefifo, true, &status, timeout);
+ if (rc < 0)
+ return rc;
+ timeout = msecs_to_jiffies(sbefifo->timeout_in_cmd_ms);
+
+ vacant = sbefifo_vacant(status);
+ len = chunk = min(vacant, remaining);
+
+ dev_vdbg(dev, " status=%08x vacant=%zd chunk=%zd\n",
+ status, vacant, chunk);
+
+ /* Write as much as we can */
+ while (len--) {
+ rc = sbefifo_up_write(sbefifo, *(command++));
+ if (rc) {
+ dev_err(dev, "FSI error %d writing UP FIFO\n", rc);
+ return rc;
+ }
+ }
+ remaining -= chunk;
+ vacant -= chunk;
+ }
+
+ /* If there's no room left, wait for some to write EOT */
+ if (!vacant) {
+ rc = sbefifo_wait(sbefifo, true, &status, timeout);
+ if (rc)
+ return rc;
+ }
+
+ /* Send an EOT */
+ rc = sbefifo_regw(sbefifo, SBEFIFO_UP | SBEFIFO_EOT_RAISE, 0);
+ if (rc)
+ dev_err(dev, "FSI error %d writing EOT\n", rc);
+ return rc;
+}
+
+static int sbefifo_read_response(struct sbefifo *sbefifo, struct iov_iter *response)
+{
+ struct device *dev = &sbefifo->fsi_dev->dev;
+ u32 status, eot_set;
+ unsigned long timeout;
+ bool overflow = false;
+ __be32 data;
+ size_t len;
+ int rc;
+
+ dev_dbg(dev, "reading response, buflen = %zd\n", iov_iter_count(response));
+
+ timeout = msecs_to_jiffies(sbefifo->timeout_start_rsp_ms);
+ for (;;) {
+ /* Grab FIFO status (this will handle parity errors) */
+ rc = sbefifo_wait(sbefifo, false, &status, timeout);
+ if (rc < 0) {
+ dev_dbg(dev, "timeout waiting (%u ms)\n", jiffies_to_msecs(timeout));
+ return rc;
+ }
+ timeout = msecs_to_jiffies(SBEFIFO_TIMEOUT_IN_RSP);
+
+ /* Decode status */
+ len = sbefifo_populated(status);
+ eot_set = sbefifo_eot_set(status);
+
+ dev_dbg(dev, " chunk size %zd eot_set=0x%x\n", len, eot_set);
+
+ /* Go through the chunk */
+ while(len--) {
+ /* Read the data */
+ rc = sbefifo_down_read(sbefifo, &data);
+ if (rc < 0)
+ return rc;
+
+ /* Was it an EOT ? */
+ if (eot_set & 0x80) {
+ /*
+ * There should be nothing else in the FIFO,
+ * if there is, mark broken, this will force
+ * a reset on next use, but don't fail the
+ * command.
+ */
+ if (len) {
+ dev_warn(dev, "FIFO read hit"
+ " EOT with still %zd data\n",
+ len);
+ sbefifo->broken = true;
+ }
+
+ /* We are done */
+ rc = sbefifo_regw(sbefifo,
+ SBEFIFO_DOWN | SBEFIFO_EOT_ACK, 0);
+
+ /*
+ * If that write fail, still complete the request but mark
+ * the fifo as broken for subsequent reset (not much else
+ * we can do here).
+ */
+ if (rc) {
+ dev_err(dev, "FSI error %d ack'ing EOT\n", rc);
+ sbefifo->broken = true;
+ }
+
+ /* Tell whether we overflowed */
+ return overflow ? -EOVERFLOW : 0;
+ }
+
+ /* Store it if there is room */
+ if (iov_iter_count(response) >= sizeof(__be32)) {
+ if (copy_to_iter(&data, sizeof(__be32), response) < sizeof(__be32))
+ return -EFAULT;
+ } else {
+ dev_vdbg(dev, "Response overflowed !\n");
+
+ overflow = true;
+ }
+
+ /* Next EOT bit */
+ eot_set <<= 1;
+ }
+ }
+ /* Shouldn't happen */
+ return -EIO;
+}
+
+static int sbefifo_do_command(struct sbefifo *sbefifo,
+ const __be32 *command, size_t cmd_len,
+ struct iov_iter *response)
+{
+ /* Try sending the command */
+ int rc = sbefifo_send_command(sbefifo, command, cmd_len);
+ if (rc)
+ return rc;
+
+ /* Now, get the response */
+ return sbefifo_read_response(sbefifo, response);
+}
+
+static void sbefifo_collect_async_ffdc(struct sbefifo *sbefifo)
+{
+ struct device *dev = &sbefifo->fsi_dev->dev;
+ struct iov_iter ffdc_iter;
+ struct kvec ffdc_iov;
+ __be32 *ffdc;
+ size_t ffdc_sz;
+ __be32 cmd[2];
+ int rc;
+
+ sbefifo->async_ffdc = false;
+ ffdc = vmalloc(SBEFIFO_MAX_FFDC_SIZE);
+ if (!ffdc) {
+ dev_err(dev, "Failed to allocate SBE FFDC buffer\n");
+ return;
+ }
+ ffdc_iov.iov_base = ffdc;
+ ffdc_iov.iov_len = SBEFIFO_MAX_FFDC_SIZE;
+ iov_iter_kvec(&ffdc_iter, ITER_DEST, &ffdc_iov, 1, SBEFIFO_MAX_FFDC_SIZE);
+ cmd[0] = cpu_to_be32(2);
+ cmd[1] = cpu_to_be32(SBEFIFO_CMD_GET_SBE_FFDC);
+ rc = sbefifo_do_command(sbefifo, cmd, 2, &ffdc_iter);
+ if (rc != 0) {
+ dev_err(dev, "Error %d retrieving SBE FFDC\n", rc);
+ goto bail;
+ }
+ ffdc_sz = SBEFIFO_MAX_FFDC_SIZE - iov_iter_count(&ffdc_iter);
+ ffdc_sz /= sizeof(__be32);
+ rc = sbefifo_parse_status(dev, SBEFIFO_CMD_GET_SBE_FFDC, ffdc,
+ ffdc_sz, &ffdc_sz);
+ if (rc != 0) {
+ dev_err(dev, "Error %d decoding SBE FFDC\n", rc);
+ goto bail;
+ }
+ if (ffdc_sz > 0)
+ sbefifo_dump_ffdc(dev, ffdc, ffdc_sz, true);
+ bail:
+ vfree(ffdc);
+
+}
+
+static int __sbefifo_submit(struct sbefifo *sbefifo,
+ const __be32 *command, size_t cmd_len,
+ struct iov_iter *response)
+{
+ struct device *dev = &sbefifo->fsi_dev->dev;
+ int rc;
+
+ if (sbefifo->dead)
+ return -ENODEV;
+
+ if (cmd_len < 2 || be32_to_cpu(command[0]) != cmd_len) {
+ dev_vdbg(dev, "Invalid command len %zd (header: %d)\n",
+ cmd_len, be32_to_cpu(command[0]));
+ return -EINVAL;
+ }
+
+ /* First ensure the HW is in a clean state */
+ rc = sbefifo_cleanup_hw(sbefifo);
+ if (rc)
+ return rc;
+
+ /* Look for async FFDC first if any */
+ if (sbefifo->async_ffdc)
+ sbefifo_collect_async_ffdc(sbefifo);
+
+ rc = sbefifo_do_command(sbefifo, command, cmd_len, response);
+ if (rc != 0 && rc != -EOVERFLOW)
+ goto fail;
+ return rc;
+ fail:
+ /*
+ * On failure, attempt a reset. Ignore the result, it will mark
+ * the fifo broken if the reset fails
+ */
+ sbefifo_request_reset(sbefifo);
+
+ /* Return original error */
+ return rc;
+}
+
+/**
+ * sbefifo_submit() - Submit and SBE fifo command and receive response
+ * @dev: The sbefifo device
+ * @command: The raw command data
+ * @cmd_len: The command size (in 32-bit words)
+ * @response: The output response buffer
+ * @resp_len: In: Response buffer size, Out: Response size
+ *
+ * This will perform the entire operation. If the response buffer
+ * overflows, returns -EOVERFLOW
+ */
+int sbefifo_submit(struct device *dev, const __be32 *command, size_t cmd_len,
+ __be32 *response, size_t *resp_len)
+{
+ struct sbefifo *sbefifo;
+ struct iov_iter resp_iter;
+ struct kvec resp_iov;
+ size_t rbytes;
+ int rc;
+
+ if (!dev)
+ return -ENODEV;
+ sbefifo = dev_get_drvdata(dev);
+ if (!sbefifo)
+ return -ENODEV;
+ if (WARN_ON_ONCE(sbefifo->magic != SBEFIFO_MAGIC))
+ return -ENODEV;
+ if (!resp_len || !command || !response)
+ return -EINVAL;
+
+ /* Prepare iov iterator */
+ rbytes = (*resp_len) * sizeof(__be32);
+ resp_iov.iov_base = response;
+ resp_iov.iov_len = rbytes;
+ iov_iter_kvec(&resp_iter, ITER_DEST, &resp_iov, 1, rbytes);
+
+ /* Perform the command */
+ rc = mutex_lock_interruptible(&sbefifo->lock);
+ if (rc)
+ return rc;
+ rc = __sbefifo_submit(sbefifo, command, cmd_len, &resp_iter);
+ mutex_unlock(&sbefifo->lock);
+
+ /* Extract the response length */
+ rbytes -= iov_iter_count(&resp_iter);
+ *resp_len = rbytes / sizeof(__be32);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(sbefifo_submit);
+
+/*
+ * Char device interface
+ */
+
+static void sbefifo_release_command(struct sbefifo_user *user)
+{
+ if (is_vmalloc_addr(user->pending_cmd))
+ vfree(user->pending_cmd);
+ user->pending_cmd = NULL;
+ user->pending_len = 0;
+}
+
+static int sbefifo_user_open(struct inode *inode, struct file *file)
+{
+ struct sbefifo *sbefifo = container_of(inode->i_cdev, struct sbefifo, cdev);
+ struct sbefifo_user *user;
+
+ user = kzalloc(sizeof(struct sbefifo_user), GFP_KERNEL);
+ if (!user)
+ return -ENOMEM;
+
+ file->private_data = user;
+ user->sbefifo = sbefifo;
+ user->cmd_page = (void *)__get_free_page(GFP_KERNEL);
+ if (!user->cmd_page) {
+ kfree(user);
+ return -ENOMEM;
+ }
+ mutex_init(&user->file_lock);
+ user->cmd_timeout_ms = SBEFIFO_TIMEOUT_IN_CMD;
+ user->read_timeout_ms = SBEFIFO_TIMEOUT_START_RSP;
+
+ return 0;
+}
+
+static ssize_t sbefifo_user_read(struct file *file, char __user *buf,
+ size_t len, loff_t *offset)
+{
+ struct sbefifo_user *user = file->private_data;
+ struct sbefifo *sbefifo;
+ struct iov_iter resp_iter;
+ struct iovec resp_iov;
+ size_t cmd_len;
+ int rc;
+
+ if (!user)
+ return -EINVAL;
+ sbefifo = user->sbefifo;
+ if (len & 3)
+ return -EINVAL;
+
+ mutex_lock(&user->file_lock);
+
+ /* Cronus relies on -EAGAIN after a short read */
+ if (user->pending_len == 0) {
+ rc = -EAGAIN;
+ goto bail;
+ }
+ if (user->pending_len < 8) {
+ rc = -EINVAL;
+ goto bail;
+ }
+ cmd_len = user->pending_len >> 2;
+
+ /* Prepare iov iterator */
+ resp_iov.iov_base = buf;
+ resp_iov.iov_len = len;
+ iov_iter_init(&resp_iter, ITER_DEST, &resp_iov, 1, len);
+
+ /* Perform the command */
+ rc = mutex_lock_interruptible(&sbefifo->lock);
+ if (rc)
+ goto bail;
+ sbefifo->timeout_in_cmd_ms = user->cmd_timeout_ms;
+ sbefifo->timeout_start_rsp_ms = user->read_timeout_ms;
+ rc = __sbefifo_submit(sbefifo, user->pending_cmd, cmd_len, &resp_iter);
+ sbefifo->timeout_start_rsp_ms = SBEFIFO_TIMEOUT_START_RSP;
+ sbefifo->timeout_in_cmd_ms = SBEFIFO_TIMEOUT_IN_CMD;
+ mutex_unlock(&sbefifo->lock);
+ if (rc < 0)
+ goto bail;
+
+ /* Extract the response length */
+ rc = len - iov_iter_count(&resp_iter);
+ bail:
+ sbefifo_release_command(user);
+ mutex_unlock(&user->file_lock);
+ return rc;
+}
+
+static ssize_t sbefifo_user_write(struct file *file, const char __user *buf,
+ size_t len, loff_t *offset)
+{
+ struct sbefifo_user *user = file->private_data;
+ struct sbefifo *sbefifo;
+ int rc = len;
+
+ if (!user)
+ return -EINVAL;
+ sbefifo = user->sbefifo;
+ if (len > SBEFIFO_MAX_USER_CMD_LEN)
+ return -EINVAL;
+ if (len & 3)
+ return -EINVAL;
+
+ mutex_lock(&user->file_lock);
+
+ /* Can we use the pre-allocate buffer ? If not, allocate */
+ if (len <= PAGE_SIZE)
+ user->pending_cmd = user->cmd_page;
+ else
+ user->pending_cmd = vmalloc(len);
+ if (!user->pending_cmd) {
+ rc = -ENOMEM;
+ goto bail;
+ }
+
+ /* Copy the command into the staging buffer */
+ if (copy_from_user(user->pending_cmd, buf, len)) {
+ rc = -EFAULT;
+ goto bail;
+ }
+
+ /* Check for the magic reset command */
+ if (len == 4 && be32_to_cpu(*(__be32 *)user->pending_cmd) ==
+ SBEFIFO_RESET_MAGIC) {
+
+ /* Clear out any pending command */
+ user->pending_len = 0;
+
+ /* Trigger reset request */
+ rc = mutex_lock_interruptible(&sbefifo->lock);
+ if (rc)
+ goto bail;
+ rc = sbefifo_request_reset(user->sbefifo);
+ mutex_unlock(&sbefifo->lock);
+ if (rc == 0)
+ rc = 4;
+ goto bail;
+ }
+
+ /* Update the staging buffer size */
+ user->pending_len = len;
+ bail:
+ if (!user->pending_len)
+ sbefifo_release_command(user);
+
+ mutex_unlock(&user->file_lock);
+
+ /* And that's it, we'll issue the command on a read */
+ return rc;
+}
+
+static int sbefifo_user_release(struct inode *inode, struct file *file)
+{
+ struct sbefifo_user *user = file->private_data;
+
+ if (!user)
+ return -EINVAL;
+
+ sbefifo_release_command(user);
+ free_page((unsigned long)user->cmd_page);
+ kfree(user);
+
+ return 0;
+}
+
+static int sbefifo_cmd_timeout(struct sbefifo_user *user, void __user *argp)
+{
+ struct device *dev = &user->sbefifo->dev;
+ u32 timeout;
+
+ if (get_user(timeout, (__u32 __user *)argp))
+ return -EFAULT;
+
+ if (timeout == 0) {
+ user->cmd_timeout_ms = SBEFIFO_TIMEOUT_IN_CMD;
+ dev_dbg(dev, "Command timeout reset to %us\n", user->cmd_timeout_ms / 1000);
+ return 0;
+ }
+
+ user->cmd_timeout_ms = timeout * 1000; /* user timeout is in sec */
+ dev_dbg(dev, "Command timeout set to %us\n", timeout);
+ return 0;
+}
+
+static int sbefifo_read_timeout(struct sbefifo_user *user, void __user *argp)
+{
+ struct device *dev = &user->sbefifo->dev;
+ u32 timeout;
+
+ if (get_user(timeout, (__u32 __user *)argp))
+ return -EFAULT;
+
+ if (timeout == 0) {
+ user->read_timeout_ms = SBEFIFO_TIMEOUT_START_RSP;
+ dev_dbg(dev, "Timeout reset to %us\n", user->read_timeout_ms / 1000);
+ return 0;
+ }
+
+ user->read_timeout_ms = timeout * 1000; /* user timeout is in sec */
+ dev_dbg(dev, "Timeout set to %us\n", timeout);
+ return 0;
+}
+
+static long sbefifo_user_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct sbefifo_user *user = file->private_data;
+ int rc = -ENOTTY;
+
+ if (!user)
+ return -EINVAL;
+
+ mutex_lock(&user->file_lock);
+ switch (cmd) {
+ case FSI_SBEFIFO_CMD_TIMEOUT_SECONDS:
+ rc = sbefifo_cmd_timeout(user, (void __user *)arg);
+ break;
+ case FSI_SBEFIFO_READ_TIMEOUT_SECONDS:
+ rc = sbefifo_read_timeout(user, (void __user *)arg);
+ break;
+ }
+ mutex_unlock(&user->file_lock);
+ return rc;
+}
+
+static const struct file_operations sbefifo_fops = {
+ .owner = THIS_MODULE,
+ .open = sbefifo_user_open,
+ .read = sbefifo_user_read,
+ .write = sbefifo_user_write,
+ .release = sbefifo_user_release,
+ .unlocked_ioctl = sbefifo_user_ioctl,
+};
+
+static void sbefifo_free(struct device *dev)
+{
+ struct sbefifo *sbefifo = container_of(dev, struct sbefifo, dev);
+
+ put_device(&sbefifo->fsi_dev->dev);
+ kfree(sbefifo);
+}
+
+/*
+ * Probe/remove
+ */
+
+static int sbefifo_probe(struct device *dev)
+{
+ struct fsi_device *fsi_dev = to_fsi_dev(dev);
+ struct sbefifo *sbefifo;
+ struct device_node *np;
+ struct platform_device *child;
+ char child_name[32];
+ int rc, didx, child_idx = 0;
+
+ dev_dbg(dev, "Found sbefifo device\n");
+
+ sbefifo = kzalloc(sizeof(*sbefifo), GFP_KERNEL);
+ if (!sbefifo)
+ return -ENOMEM;
+
+ /* Grab a reference to the device (parent of our cdev), we'll drop it later */
+ if (!get_device(dev)) {
+ kfree(sbefifo);
+ return -ENODEV;
+ }
+
+ sbefifo->magic = SBEFIFO_MAGIC;
+ sbefifo->fsi_dev = fsi_dev;
+ dev_set_drvdata(dev, sbefifo);
+ mutex_init(&sbefifo->lock);
+ sbefifo->timeout_in_cmd_ms = SBEFIFO_TIMEOUT_IN_CMD;
+ sbefifo->timeout_start_rsp_ms = SBEFIFO_TIMEOUT_START_RSP;
+
+ /* Create chardev for userspace access */
+ sbefifo->dev.type = &fsi_cdev_type;
+ sbefifo->dev.parent = dev;
+ sbefifo->dev.release = sbefifo_free;
+ device_initialize(&sbefifo->dev);
+
+ /* Allocate a minor in the FSI space */
+ rc = fsi_get_new_minor(fsi_dev, fsi_dev_sbefifo, &sbefifo->dev.devt, &didx);
+ if (rc)
+ goto err;
+
+ dev_set_name(&sbefifo->dev, "sbefifo%d", didx);
+ cdev_init(&sbefifo->cdev, &sbefifo_fops);
+ rc = cdev_device_add(&sbefifo->cdev, &sbefifo->dev);
+ if (rc) {
+ dev_err(dev, "Error %d creating char device %s\n",
+ rc, dev_name(&sbefifo->dev));
+ goto err_free_minor;
+ }
+
+ /* Create platform devs for dts child nodes (occ, etc) */
+ for_each_available_child_of_node(dev->of_node, np) {
+ snprintf(child_name, sizeof(child_name), "%s-dev%d",
+ dev_name(&sbefifo->dev), child_idx++);
+ child = of_platform_device_create(np, child_name, dev);
+ if (!child)
+ dev_warn(dev, "failed to create child %s dev\n",
+ child_name);
+ }
+
+ device_create_file(&sbefifo->dev, &dev_attr_timeout);
+
+ return 0;
+ err_free_minor:
+ fsi_free_minor(sbefifo->dev.devt);
+ err:
+ put_device(&sbefifo->dev);
+ return rc;
+}
+
+static int sbefifo_unregister_child(struct device *dev, void *data)
+{
+ struct platform_device *child = to_platform_device(dev);
+
+ of_device_unregister(child);
+ if (dev->of_node)
+ of_node_clear_flag(dev->of_node, OF_POPULATED);
+
+ return 0;
+}
+
+static int sbefifo_remove(struct device *dev)
+{
+ struct sbefifo *sbefifo = dev_get_drvdata(dev);
+
+ dev_dbg(dev, "Removing sbefifo device...\n");
+
+ device_remove_file(&sbefifo->dev, &dev_attr_timeout);
+
+ mutex_lock(&sbefifo->lock);
+ sbefifo->dead = true;
+ mutex_unlock(&sbefifo->lock);
+
+ cdev_device_del(&sbefifo->cdev, &sbefifo->dev);
+ fsi_free_minor(sbefifo->dev.devt);
+ device_for_each_child(dev, NULL, sbefifo_unregister_child);
+ put_device(&sbefifo->dev);
+
+ return 0;
+}
+
+static const struct fsi_device_id sbefifo_ids[] = {
+ {
+ .engine_type = FSI_ENGID_SBE,
+ .version = FSI_VERSION_ANY,
+ },
+ { 0 }
+};
+
+static struct fsi_driver sbefifo_drv = {
+ .id_table = sbefifo_ids,
+ .drv = {
+ .name = DEVICE_NAME,
+ .bus = &fsi_bus_type,
+ .probe = sbefifo_probe,
+ .remove = sbefifo_remove,
+ }
+};
+
+static int sbefifo_init(void)
+{
+ return fsi_driver_register(&sbefifo_drv);
+}
+
+static void sbefifo_exit(void)
+{
+ fsi_driver_unregister(&sbefifo_drv);
+}
+
+module_init(sbefifo_init);
+module_exit(sbefifo_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Brad Bishop <bradleyb@fuzziesquirrel.com>");
+MODULE_AUTHOR("Eddie James <eajames@linux.vnet.ibm.com>");
+MODULE_AUTHOR("Andrew Jeffery <andrew@aj.id.au>");
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("Linux device interface to the POWER Self Boot Engine");
diff --git a/drivers/fsi/fsi-scom.c b/drivers/fsi/fsi-scom.c
new file mode 100644
index 000000000..61dbda9db
--- /dev/null
+++ b/drivers/fsi/fsi-scom.c
@@ -0,0 +1,628 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SCOM FSI Client device driver
+ *
+ * Copyright (C) IBM Corporation 2016
+ */
+
+#include <linux/fsi.h>
+#include <linux/module.h>
+#include <linux/cdev.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/mod_devicetable.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+
+#include <uapi/linux/fsi.h>
+
+#define FSI_ENGID_SCOM 0x5
+
+/* SCOM engine register set */
+#define SCOM_DATA0_REG 0x00
+#define SCOM_DATA1_REG 0x04
+#define SCOM_CMD_REG 0x08
+#define SCOM_FSI2PIB_RESET_REG 0x18
+#define SCOM_STATUS_REG 0x1C /* Read */
+#define SCOM_PIB_RESET_REG 0x1C /* Write */
+
+/* Command register */
+#define SCOM_WRITE_CMD 0x80000000
+#define SCOM_READ_CMD 0x00000000
+
+/* Status register bits */
+#define SCOM_STATUS_ERR_SUMMARY 0x80000000
+#define SCOM_STATUS_PROTECTION 0x01000000
+#define SCOM_STATUS_PARITY 0x04000000
+#define SCOM_STATUS_PIB_ABORT 0x00100000
+#define SCOM_STATUS_PIB_RESP_MASK 0x00007000
+#define SCOM_STATUS_PIB_RESP_SHIFT 12
+
+#define SCOM_STATUS_FSI2PIB_ERROR (SCOM_STATUS_PROTECTION | \
+ SCOM_STATUS_PARITY | \
+ SCOM_STATUS_PIB_ABORT)
+#define SCOM_STATUS_ANY_ERR (SCOM_STATUS_FSI2PIB_ERROR | \
+ SCOM_STATUS_PIB_RESP_MASK)
+/* SCOM address encodings */
+#define XSCOM_ADDR_IND_FLAG BIT_ULL(63)
+#define XSCOM_ADDR_INF_FORM1 BIT_ULL(60)
+
+/* SCOM indirect stuff */
+#define XSCOM_ADDR_DIRECT_PART 0x7fffffffull
+#define XSCOM_ADDR_INDIRECT_PART 0x000fffff00000000ull
+#define XSCOM_DATA_IND_READ BIT_ULL(63)
+#define XSCOM_DATA_IND_COMPLETE BIT_ULL(31)
+#define XSCOM_DATA_IND_ERR_MASK 0x70000000ull
+#define XSCOM_DATA_IND_ERR_SHIFT 28
+#define XSCOM_DATA_IND_DATA 0x0000ffffull
+#define XSCOM_DATA_IND_FORM1_DATA 0x000fffffffffffffull
+#define XSCOM_ADDR_FORM1_LOW 0x000ffffffffull
+#define XSCOM_ADDR_FORM1_HI 0xfff00000000ull
+#define XSCOM_ADDR_FORM1_HI_SHIFT 20
+
+/* Retries */
+#define SCOM_MAX_IND_RETRIES 10 /* Retries indirect not ready */
+
+struct scom_device {
+ struct list_head link;
+ struct fsi_device *fsi_dev;
+ struct device dev;
+ struct cdev cdev;
+ struct mutex lock;
+ bool dead;
+};
+
+static int __put_scom(struct scom_device *scom_dev, uint64_t value,
+ uint32_t addr, uint32_t *status)
+{
+ __be32 data, raw_status;
+ int rc;
+
+ data = cpu_to_be32((value >> 32) & 0xffffffff);
+ rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA0_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ data = cpu_to_be32(value & 0xffffffff);
+ rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA1_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ data = cpu_to_be32(SCOM_WRITE_CMD | addr);
+ rc = fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+ rc = fsi_device_read(scom_dev->fsi_dev, SCOM_STATUS_REG, &raw_status,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+ *status = be32_to_cpu(raw_status);
+
+ return 0;
+}
+
+static int __get_scom(struct scom_device *scom_dev, uint64_t *value,
+ uint32_t addr, uint32_t *status)
+{
+ __be32 data, raw_status;
+ int rc;
+
+
+ *value = 0ULL;
+ data = cpu_to_be32(SCOM_READ_CMD | addr);
+ rc = fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+ rc = fsi_device_read(scom_dev->fsi_dev, SCOM_STATUS_REG, &raw_status,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ /*
+ * Read the data registers even on error, so we don't have
+ * to interpret the status register here.
+ */
+ rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA0_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+ *value |= (uint64_t)be32_to_cpu(data) << 32;
+ rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA1_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+ *value |= be32_to_cpu(data);
+ *status = be32_to_cpu(raw_status);
+
+ return rc;
+}
+
+static int put_indirect_scom_form0(struct scom_device *scom, uint64_t value,
+ uint64_t addr, uint32_t *status)
+{
+ uint64_t ind_data, ind_addr;
+ int rc, err;
+
+ if (value & ~XSCOM_DATA_IND_DATA)
+ return -EINVAL;
+
+ ind_addr = addr & XSCOM_ADDR_DIRECT_PART;
+ ind_data = (addr & XSCOM_ADDR_INDIRECT_PART) | value;
+ rc = __put_scom(scom, ind_data, ind_addr, status);
+ if (rc || (*status & SCOM_STATUS_ANY_ERR))
+ return rc;
+
+ rc = __get_scom(scom, &ind_data, addr, status);
+ if (rc || (*status & SCOM_STATUS_ANY_ERR))
+ return rc;
+
+ err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT;
+ *status = err << SCOM_STATUS_PIB_RESP_SHIFT;
+
+ return 0;
+}
+
+static int put_indirect_scom_form1(struct scom_device *scom, uint64_t value,
+ uint64_t addr, uint32_t *status)
+{
+ uint64_t ind_data, ind_addr;
+
+ if (value & ~XSCOM_DATA_IND_FORM1_DATA)
+ return -EINVAL;
+
+ ind_addr = addr & XSCOM_ADDR_FORM1_LOW;
+ ind_data = value | (addr & XSCOM_ADDR_FORM1_HI) << XSCOM_ADDR_FORM1_HI_SHIFT;
+ return __put_scom(scom, ind_data, ind_addr, status);
+}
+
+static int get_indirect_scom_form0(struct scom_device *scom, uint64_t *value,
+ uint64_t addr, uint32_t *status)
+{
+ uint64_t ind_data, ind_addr;
+ int rc, err;
+
+ ind_addr = addr & XSCOM_ADDR_DIRECT_PART;
+ ind_data = (addr & XSCOM_ADDR_INDIRECT_PART) | XSCOM_DATA_IND_READ;
+ rc = __put_scom(scom, ind_data, ind_addr, status);
+ if (rc || (*status & SCOM_STATUS_ANY_ERR))
+ return rc;
+
+ rc = __get_scom(scom, &ind_data, addr, status);
+ if (rc || (*status & SCOM_STATUS_ANY_ERR))
+ return rc;
+
+ err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT;
+ *status = err << SCOM_STATUS_PIB_RESP_SHIFT;
+ *value = ind_data & XSCOM_DATA_IND_DATA;
+
+ return 0;
+}
+
+static int raw_put_scom(struct scom_device *scom, uint64_t value,
+ uint64_t addr, uint32_t *status)
+{
+ if (addr & XSCOM_ADDR_IND_FLAG) {
+ if (addr & XSCOM_ADDR_INF_FORM1)
+ return put_indirect_scom_form1(scom, value, addr, status);
+ else
+ return put_indirect_scom_form0(scom, value, addr, status);
+ } else
+ return __put_scom(scom, value, addr, status);
+}
+
+static int raw_get_scom(struct scom_device *scom, uint64_t *value,
+ uint64_t addr, uint32_t *status)
+{
+ if (addr & XSCOM_ADDR_IND_FLAG) {
+ if (addr & XSCOM_ADDR_INF_FORM1)
+ return -ENXIO;
+ return get_indirect_scom_form0(scom, value, addr, status);
+ } else
+ return __get_scom(scom, value, addr, status);
+}
+
+static int handle_fsi2pib_status(struct scom_device *scom, uint32_t status)
+{
+ uint32_t dummy = -1;
+
+ if (status & SCOM_STATUS_FSI2PIB_ERROR)
+ fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy,
+ sizeof(uint32_t));
+
+ if (status & SCOM_STATUS_PROTECTION)
+ return -EPERM;
+ if (status & SCOM_STATUS_PARITY)
+ return -EIO;
+
+ if (status & SCOM_STATUS_PIB_ABORT)
+ return -EBUSY;
+ return 0;
+}
+
+static int handle_pib_status(struct scom_device *scom, uint8_t status)
+{
+ uint32_t dummy = -1;
+
+ if (status == SCOM_PIB_SUCCESS)
+ return 0;
+ if (status == SCOM_PIB_BLOCKED)
+ return -EBUSY;
+
+ /* Reset the bridge */
+ fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy,
+ sizeof(uint32_t));
+
+ switch(status) {
+ case SCOM_PIB_OFFLINE:
+ return -ENODEV;
+ case SCOM_PIB_BAD_ADDR:
+ return -ENXIO;
+ case SCOM_PIB_TIMEOUT:
+ return -ETIMEDOUT;
+ case SCOM_PIB_PARTIAL:
+ case SCOM_PIB_CLK_ERR:
+ case SCOM_PIB_PARITY_ERR:
+ default:
+ return -EIO;
+ }
+}
+
+static int put_scom(struct scom_device *scom, uint64_t value,
+ uint64_t addr)
+{
+ uint32_t status;
+ int rc;
+
+ rc = raw_put_scom(scom, value, addr, &status);
+ if (rc)
+ return rc;
+
+ rc = handle_fsi2pib_status(scom, status);
+ if (rc)
+ return rc;
+
+ return handle_pib_status(scom,
+ (status & SCOM_STATUS_PIB_RESP_MASK)
+ >> SCOM_STATUS_PIB_RESP_SHIFT);
+}
+
+static int get_scom(struct scom_device *scom, uint64_t *value,
+ uint64_t addr)
+{
+ uint32_t status;
+ int rc;
+
+ rc = raw_get_scom(scom, value, addr, &status);
+ if (rc)
+ return rc;
+
+ rc = handle_fsi2pib_status(scom, status);
+ if (rc)
+ return rc;
+
+ return handle_pib_status(scom,
+ (status & SCOM_STATUS_PIB_RESP_MASK)
+ >> SCOM_STATUS_PIB_RESP_SHIFT);
+}
+
+static ssize_t scom_read(struct file *filep, char __user *buf, size_t len,
+ loff_t *offset)
+{
+ struct scom_device *scom = filep->private_data;
+ struct device *dev = &scom->fsi_dev->dev;
+ uint64_t val;
+ int rc;
+
+ if (len != sizeof(uint64_t))
+ return -EINVAL;
+
+ mutex_lock(&scom->lock);
+ if (scom->dead)
+ rc = -ENODEV;
+ else
+ rc = get_scom(scom, &val, *offset);
+ mutex_unlock(&scom->lock);
+ if (rc) {
+ dev_dbg(dev, "get_scom fail:%d\n", rc);
+ return rc;
+ }
+
+ rc = copy_to_user(buf, &val, len);
+ if (rc)
+ dev_dbg(dev, "copy to user failed:%d\n", rc);
+
+ return rc ? rc : len;
+}
+
+static ssize_t scom_write(struct file *filep, const char __user *buf,
+ size_t len, loff_t *offset)
+{
+ int rc;
+ struct scom_device *scom = filep->private_data;
+ struct device *dev = &scom->fsi_dev->dev;
+ uint64_t val;
+
+ if (len != sizeof(uint64_t))
+ return -EINVAL;
+
+ rc = copy_from_user(&val, buf, len);
+ if (rc) {
+ dev_dbg(dev, "copy from user failed:%d\n", rc);
+ return -EINVAL;
+ }
+
+ mutex_lock(&scom->lock);
+ if (scom->dead)
+ rc = -ENODEV;
+ else
+ rc = put_scom(scom, val, *offset);
+ mutex_unlock(&scom->lock);
+ if (rc) {
+ dev_dbg(dev, "put_scom failed with:%d\n", rc);
+ return rc;
+ }
+
+ return len;
+}
+
+static loff_t scom_llseek(struct file *file, loff_t offset, int whence)
+{
+ switch (whence) {
+ case SEEK_CUR:
+ break;
+ case SEEK_SET:
+ file->f_pos = offset;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return offset;
+}
+
+static void raw_convert_status(struct scom_access *acc, uint32_t status)
+{
+ acc->pib_status = (status & SCOM_STATUS_PIB_RESP_MASK) >>
+ SCOM_STATUS_PIB_RESP_SHIFT;
+ acc->intf_errors = 0;
+
+ if (status & SCOM_STATUS_PROTECTION)
+ acc->intf_errors |= SCOM_INTF_ERR_PROTECTION;
+ else if (status & SCOM_STATUS_PARITY)
+ acc->intf_errors |= SCOM_INTF_ERR_PARITY;
+ else if (status & SCOM_STATUS_PIB_ABORT)
+ acc->intf_errors |= SCOM_INTF_ERR_ABORT;
+ else if (status & SCOM_STATUS_ERR_SUMMARY)
+ acc->intf_errors |= SCOM_INTF_ERR_UNKNOWN;
+}
+
+static int scom_raw_read(struct scom_device *scom, void __user *argp)
+{
+ struct scom_access acc;
+ uint32_t status;
+ int rc;
+
+ if (copy_from_user(&acc, argp, sizeof(struct scom_access)))
+ return -EFAULT;
+
+ rc = raw_get_scom(scom, &acc.data, acc.addr, &status);
+ if (rc)
+ return rc;
+ raw_convert_status(&acc, status);
+ if (copy_to_user(argp, &acc, sizeof(struct scom_access)))
+ return -EFAULT;
+ return 0;
+}
+
+static int scom_raw_write(struct scom_device *scom, void __user *argp)
+{
+ u64 prev_data, mask, data;
+ struct scom_access acc;
+ uint32_t status;
+ int rc;
+
+ if (copy_from_user(&acc, argp, sizeof(struct scom_access)))
+ return -EFAULT;
+
+ if (acc.mask) {
+ rc = raw_get_scom(scom, &prev_data, acc.addr, &status);
+ if (rc)
+ return rc;
+ if (status & SCOM_STATUS_ANY_ERR)
+ goto fail;
+ mask = acc.mask;
+ } else {
+ prev_data = mask = -1ull;
+ }
+ data = (prev_data & ~mask) | (acc.data & mask);
+ rc = raw_put_scom(scom, data, acc.addr, &status);
+ if (rc)
+ return rc;
+ fail:
+ raw_convert_status(&acc, status);
+ if (copy_to_user(argp, &acc, sizeof(struct scom_access)))
+ return -EFAULT;
+ return 0;
+}
+
+static int scom_reset(struct scom_device *scom, void __user *argp)
+{
+ uint32_t flags, dummy = -1;
+ int rc = 0;
+
+ if (get_user(flags, (__u32 __user *)argp))
+ return -EFAULT;
+ if (flags & SCOM_RESET_PIB)
+ rc = fsi_device_write(scom->fsi_dev, SCOM_PIB_RESET_REG, &dummy,
+ sizeof(uint32_t));
+ if (!rc && (flags & (SCOM_RESET_PIB | SCOM_RESET_INTF)))
+ rc = fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy,
+ sizeof(uint32_t));
+ return rc;
+}
+
+static int scom_check(struct scom_device *scom, void __user *argp)
+{
+ /* Still need to find out how to get "protected" */
+ return put_user(SCOM_CHECK_SUPPORTED, (__u32 __user *)argp);
+}
+
+static long scom_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct scom_device *scom = file->private_data;
+ void __user *argp = (void __user *)arg;
+ int rc = -ENOTTY;
+
+ mutex_lock(&scom->lock);
+ if (scom->dead) {
+ mutex_unlock(&scom->lock);
+ return -ENODEV;
+ }
+ switch(cmd) {
+ case FSI_SCOM_CHECK:
+ rc = scom_check(scom, argp);
+ break;
+ case FSI_SCOM_READ:
+ rc = scom_raw_read(scom, argp);
+ break;
+ case FSI_SCOM_WRITE:
+ rc = scom_raw_write(scom, argp);
+ break;
+ case FSI_SCOM_RESET:
+ rc = scom_reset(scom, argp);
+ break;
+ }
+ mutex_unlock(&scom->lock);
+ return rc;
+}
+
+static int scom_open(struct inode *inode, struct file *file)
+{
+ struct scom_device *scom = container_of(inode->i_cdev, struct scom_device, cdev);
+
+ file->private_data = scom;
+
+ return 0;
+}
+
+static const struct file_operations scom_fops = {
+ .owner = THIS_MODULE,
+ .open = scom_open,
+ .llseek = scom_llseek,
+ .read = scom_read,
+ .write = scom_write,
+ .unlocked_ioctl = scom_ioctl,
+};
+
+static void scom_free(struct device *dev)
+{
+ struct scom_device *scom = container_of(dev, struct scom_device, dev);
+
+ put_device(&scom->fsi_dev->dev);
+ kfree(scom);
+}
+
+static int scom_probe(struct device *dev)
+{
+ struct fsi_device *fsi_dev = to_fsi_dev(dev);
+ struct scom_device *scom;
+ int rc, didx;
+
+ scom = kzalloc(sizeof(*scom), GFP_KERNEL);
+ if (!scom)
+ return -ENOMEM;
+ dev_set_drvdata(dev, scom);
+ mutex_init(&scom->lock);
+
+ /* Grab a reference to the device (parent of our cdev), we'll drop it later */
+ if (!get_device(dev)) {
+ kfree(scom);
+ return -ENODEV;
+ }
+ scom->fsi_dev = fsi_dev;
+
+ /* Create chardev for userspace access */
+ scom->dev.type = &fsi_cdev_type;
+ scom->dev.parent = dev;
+ scom->dev.release = scom_free;
+ device_initialize(&scom->dev);
+
+ /* Allocate a minor in the FSI space */
+ rc = fsi_get_new_minor(fsi_dev, fsi_dev_scom, &scom->dev.devt, &didx);
+ if (rc)
+ goto err;
+
+ dev_set_name(&scom->dev, "scom%d", didx);
+ cdev_init(&scom->cdev, &scom_fops);
+ rc = cdev_device_add(&scom->cdev, &scom->dev);
+ if (rc) {
+ dev_err(dev, "Error %d creating char device %s\n",
+ rc, dev_name(&scom->dev));
+ goto err_free_minor;
+ }
+
+ return 0;
+ err_free_minor:
+ fsi_free_minor(scom->dev.devt);
+ err:
+ put_device(&scom->dev);
+ return rc;
+}
+
+static int scom_remove(struct device *dev)
+{
+ struct scom_device *scom = dev_get_drvdata(dev);
+
+ mutex_lock(&scom->lock);
+ scom->dead = true;
+ mutex_unlock(&scom->lock);
+ cdev_device_del(&scom->cdev, &scom->dev);
+ fsi_free_minor(scom->dev.devt);
+ put_device(&scom->dev);
+
+ return 0;
+}
+
+static const struct of_device_id scom_of_ids[] = {
+ { .compatible = "ibm,fsi2pib" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, scom_of_ids);
+
+static const struct fsi_device_id scom_ids[] = {
+ {
+ .engine_type = FSI_ENGID_SCOM,
+ .version = FSI_VERSION_ANY,
+ },
+ { 0 }
+};
+
+static struct fsi_driver scom_drv = {
+ .id_table = scom_ids,
+ .drv = {
+ .name = "scom",
+ .bus = &fsi_bus_type,
+ .of_match_table = scom_of_ids,
+ .probe = scom_probe,
+ .remove = scom_remove,
+ }
+};
+
+static int scom_init(void)
+{
+ return fsi_driver_register(&scom_drv);
+}
+
+static void scom_exit(void)
+{
+ fsi_driver_unregister(&scom_drv);
+}
+
+module_init(scom_init);
+module_exit(scom_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/fsi/fsi-slave.h b/drivers/fsi/fsi-slave.h
new file mode 100644
index 000000000..1d63a5858
--- /dev/null
+++ b/drivers/fsi/fsi-slave.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) IBM Corporation 2023 */
+
+#ifndef DRIVERS_FSI_SLAVE_H
+#define DRIVERS_FSI_SLAVE_H
+
+#include <linux/cdev.h>
+#include <linux/device.h>
+
+struct fsi_master;
+
+struct fsi_slave {
+ struct device dev;
+ struct fsi_master *master;
+ struct cdev cdev;
+ int cdev_idx;
+ int id; /* FSI address */
+ int link; /* FSI link# */
+ u32 cfam_id;
+ int chip_id;
+ uint32_t size; /* size of slave address space */
+ u8 t_send_delay;
+ u8 t_echo_delay;
+};
+
+#define to_fsi_slave(d) container_of(d, struct fsi_slave, dev)
+
+#endif /* DRIVERS_FSI_SLAVE_H */
diff --git a/drivers/fsi/i2cr-scom.c b/drivers/fsi/i2cr-scom.c
new file mode 100644
index 000000000..cb7e02213
--- /dev/null
+++ b/drivers/fsi/i2cr-scom.c
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) IBM Corporation 2023 */
+
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/fsi.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+
+#include "fsi-master-i2cr.h"
+#include "fsi-slave.h"
+
+struct i2cr_scom {
+ struct device dev;
+ struct cdev cdev;
+ struct fsi_master_i2cr *i2cr;
+};
+
+static loff_t i2cr_scom_llseek(struct file *file, loff_t offset, int whence)
+{
+ switch (whence) {
+ case SEEK_CUR:
+ break;
+ case SEEK_SET:
+ file->f_pos = offset;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return offset;
+}
+
+static ssize_t i2cr_scom_read(struct file *filep, char __user *buf, size_t len, loff_t *offset)
+{
+ struct i2cr_scom *scom = filep->private_data;
+ u64 data;
+ int ret;
+
+ if (len != sizeof(data))
+ return -EINVAL;
+
+ ret = fsi_master_i2cr_read(scom->i2cr, (u32)*offset, &data);
+ if (ret)
+ return ret;
+
+ ret = copy_to_user(buf, &data, len);
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static ssize_t i2cr_scom_write(struct file *filep, const char __user *buf, size_t len,
+ loff_t *offset)
+{
+ struct i2cr_scom *scom = filep->private_data;
+ u64 data;
+ int ret;
+
+ if (len != sizeof(data))
+ return -EINVAL;
+
+ ret = copy_from_user(&data, buf, len);
+ if (ret)
+ return ret;
+
+ ret = fsi_master_i2cr_write(scom->i2cr, (u32)*offset, data);
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static const struct file_operations i2cr_scom_fops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .llseek = i2cr_scom_llseek,
+ .read = i2cr_scom_read,
+ .write = i2cr_scom_write,
+};
+
+static int i2cr_scom_probe(struct device *dev)
+{
+ struct fsi_device *fsi_dev = to_fsi_dev(dev);
+ struct i2cr_scom *scom;
+ int didx;
+ int ret;
+
+ if (!is_fsi_master_i2cr(fsi_dev->slave->master))
+ return -ENODEV;
+
+ scom = devm_kzalloc(dev, sizeof(*scom), GFP_KERNEL);
+ if (!scom)
+ return -ENOMEM;
+
+ scom->i2cr = to_fsi_master_i2cr(fsi_dev->slave->master);
+ dev_set_drvdata(dev, scom);
+
+ scom->dev.type = &fsi_cdev_type;
+ scom->dev.parent = dev;
+ device_initialize(&scom->dev);
+
+ ret = fsi_get_new_minor(fsi_dev, fsi_dev_scom, &scom->dev.devt, &didx);
+ if (ret)
+ return ret;
+
+ dev_set_name(&scom->dev, "scom%d", didx);
+ cdev_init(&scom->cdev, &i2cr_scom_fops);
+ ret = cdev_device_add(&scom->cdev, &scom->dev);
+ if (ret)
+ fsi_free_minor(scom->dev.devt);
+
+ return ret;
+}
+
+static int i2cr_scom_remove(struct device *dev)
+{
+ struct i2cr_scom *scom = dev_get_drvdata(dev);
+
+ cdev_device_del(&scom->cdev, &scom->dev);
+ fsi_free_minor(scom->dev.devt);
+
+ return 0;
+}
+
+static const struct of_device_id i2cr_scom_of_ids[] = {
+ { .compatible = "ibm,i2cr-scom" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, i2cr_scom_of_ids);
+
+static const struct fsi_device_id i2cr_scom_ids[] = {
+ { 0x5, FSI_VERSION_ANY },
+ { }
+};
+
+static struct fsi_driver i2cr_scom_driver = {
+ .id_table = i2cr_scom_ids,
+ .drv = {
+ .name = "i2cr_scom",
+ .bus = &fsi_bus_type,
+ .of_match_table = i2cr_scom_of_ids,
+ .probe = i2cr_scom_probe,
+ .remove = i2cr_scom_remove,
+ }
+};
+
+module_fsi_driver(i2cr_scom_driver);
+
+MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>");
+MODULE_DESCRIPTION("IBM I2C Responder SCOM driver");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-12 03:22:20 +0000