diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c')
-rw-r--r-- | drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 158 |
1 files changed, 98 insertions, 60 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c index b315ca6f1c..ba76dd4a2c 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c @@ -32,6 +32,7 @@ #include "clk_mgr/dcn32/dcn32_smu13_driver_if.h" #include "dcn30/dcn30_resource.h" #include "link.h" +#include "dc_state_priv.h" #define DC_LOGGER_INIT(logger) @@ -45,6 +46,14 @@ static const struct subvp_high_refresh_list subvp_high_refresh_list = { {.width = 1920, .height = 1080, }}, }; +static const struct subvp_active_margin_list subvp_active_margin_list = { + .min_refresh = 55, + .max_refresh = 65, + .res = { + {.width = 2560, .height = 1440, }, + {.width = 1920, .height = 1080, }}, +}; + struct _vcs_dpi_ip_params_st dcn3_2_ip = { .gpuvm_enable = 0, .gpuvm_max_page_table_levels = 4, @@ -333,7 +342,7 @@ void dcn32_helper_populate_phantom_dlg_params(struct dc *dc, if (!pipe->stream) continue; - if (pipe->plane_state && pipe->stream->mall_stream_config.type == SUBVP_PHANTOM) { + if (pipe->plane_state && dc_state_get_pipe_subvp_type(context, pipe) == SUBVP_PHANTOM) { pipes[pipe_idx].pipe.dest.vstartup_start = get_vstartup(&context->bw_ctx.dml, pipes, pipe_cnt, pipe_idx); pipes[pipe_idx].pipe.dest.vupdate_offset = @@ -616,7 +625,7 @@ static bool dcn32_assign_subvp_pipe(struct dc *dc, if (pipe->plane_state && !pipe->top_pipe && !dcn32_is_center_timing(pipe) && !(pipe->stream->timing.pix_clk_100hz / 10000 > DCN3_2_MAX_SUBVP_PIXEL_RATE_MHZ) && (!dcn32_is_psr_capable(pipe) || (context->stream_count == 1 && dc->caps.dmub_caps.subvp_psr)) && - pipe->stream->mall_stream_config.type == SUBVP_NONE && + dc_state_get_pipe_subvp_type(context, pipe) == SUBVP_NONE && (refresh_rate < 120 || dcn32_allow_subvp_high_refresh_rate(dc, context, pipe)) && !pipe->plane_state->address.tmz_surface && (vba->ActiveDRAMClockChangeLatencyMarginPerState[vba->VoltageLevel][vba->maxMpcComb][vba->pipe_plane[pipe_idx]] <= 0 || @@ -674,7 +683,7 @@ static bool dcn32_enough_pipes_for_subvp(struct dc *dc, struct dc_state *context // Find the minimum pipe split count for non SubVP pipes if (resource_is_pipe_type(pipe, OPP_HEAD) && - pipe->stream->mall_stream_config.type == SUBVP_NONE) { + dc_state_get_pipe_subvp_type(context, pipe) == SUBVP_NONE) { split_cnt = 0; while (pipe) { split_cnt++; @@ -727,8 +736,8 @@ static bool subvp_subvp_schedulable(struct dc *dc, struct dc_state *context) * and also to store the two main SubVP pipe pointers in subvp_pipes[2]. */ if (pipe->stream && pipe->plane_state && !pipe->top_pipe && - pipe->stream->mall_stream_config.type == SUBVP_MAIN) { - phantom = pipe->stream->mall_stream_config.paired_stream; + dc_state_get_pipe_subvp_type(context, pipe) == SUBVP_MAIN) { + phantom = dc_state_get_paired_subvp_stream(context, pipe->stream); microschedule_lines = (phantom->timing.v_total - phantom->timing.v_front_porch) + phantom->timing.v_addressable; @@ -796,6 +805,9 @@ static bool subvp_drr_schedulable(struct dc *dc, struct dc_state *context) int16_t stretched_drr_us = 0; int16_t drr_stretched_vblank_us = 0; int16_t max_vblank_mallregion = 0; + struct dc_stream_state *phantom_stream; + bool subvp_found = false; + bool drr_found = false; // Find SubVP pipe for (i = 0; i < dc->res_pool->pipe_count; i++) { @@ -808,8 +820,10 @@ static bool subvp_drr_schedulable(struct dc *dc, struct dc_state *context) continue; // Find the SubVP pipe - if (pipe->stream->mall_stream_config.type == SUBVP_MAIN) + if (dc_state_get_pipe_subvp_type(context, pipe) == SUBVP_MAIN) { + subvp_found = true; break; + } } // Find the DRR pipe @@ -817,32 +831,37 @@ static bool subvp_drr_schedulable(struct dc *dc, struct dc_state *context) drr_pipe = &context->res_ctx.pipe_ctx[i]; // We check for master pipe only - if (!resource_is_pipe_type(pipe, OTG_MASTER) || - !resource_is_pipe_type(pipe, DPP_PIPE)) + if (!resource_is_pipe_type(drr_pipe, OTG_MASTER) || + !resource_is_pipe_type(drr_pipe, DPP_PIPE)) continue; - if (drr_pipe->stream->mall_stream_config.type == SUBVP_NONE && drr_pipe->stream->ignore_msa_timing_param && - (drr_pipe->stream->allow_freesync || drr_pipe->stream->vrr_active_variable || drr_pipe->stream->vrr_active_fixed)) + if (dc_state_get_pipe_subvp_type(context, drr_pipe) == SUBVP_NONE && drr_pipe->stream->ignore_msa_timing_param && + (drr_pipe->stream->allow_freesync || drr_pipe->stream->vrr_active_variable || drr_pipe->stream->vrr_active_fixed)) { + drr_found = true; break; + } } - main_timing = &pipe->stream->timing; - phantom_timing = &pipe->stream->mall_stream_config.paired_stream->timing; - drr_timing = &drr_pipe->stream->timing; - prefetch_us = (phantom_timing->v_total - phantom_timing->v_front_porch) * phantom_timing->h_total / - (double)(phantom_timing->pix_clk_100hz * 100) * 1000000 + - dc->caps.subvp_prefetch_end_to_mall_start_us; - subvp_active_us = main_timing->v_addressable * main_timing->h_total / - (double)(main_timing->pix_clk_100hz * 100) * 1000000; - drr_frame_us = drr_timing->v_total * drr_timing->h_total / - (double)(drr_timing->pix_clk_100hz * 100) * 1000000; - // P-State allow width and FW delays already included phantom_timing->v_addressable - mall_region_us = phantom_timing->v_addressable * phantom_timing->h_total / - (double)(phantom_timing->pix_clk_100hz * 100) * 1000000; - stretched_drr_us = drr_frame_us + mall_region_us + SUBVP_DRR_MARGIN_US; - drr_stretched_vblank_us = (drr_timing->v_total - drr_timing->v_addressable) * drr_timing->h_total / - (double)(drr_timing->pix_clk_100hz * 100) * 1000000 + (stretched_drr_us - drr_frame_us); - max_vblank_mallregion = drr_stretched_vblank_us > mall_region_us ? drr_stretched_vblank_us : mall_region_us; + if (subvp_found && drr_found) { + phantom_stream = dc_state_get_paired_subvp_stream(context, pipe->stream); + main_timing = &pipe->stream->timing; + phantom_timing = &phantom_stream->timing; + drr_timing = &drr_pipe->stream->timing; + prefetch_us = (phantom_timing->v_total - phantom_timing->v_front_porch) * phantom_timing->h_total / + (double)(phantom_timing->pix_clk_100hz * 100) * 1000000 + + dc->caps.subvp_prefetch_end_to_mall_start_us; + subvp_active_us = main_timing->v_addressable * main_timing->h_total / + (double)(main_timing->pix_clk_100hz * 100) * 1000000; + drr_frame_us = drr_timing->v_total * drr_timing->h_total / + (double)(drr_timing->pix_clk_100hz * 100) * 1000000; + // P-State allow width and FW delays already included phantom_timing->v_addressable + mall_region_us = phantom_timing->v_addressable * phantom_timing->h_total / + (double)(phantom_timing->pix_clk_100hz * 100) * 1000000; + stretched_drr_us = drr_frame_us + mall_region_us + SUBVP_DRR_MARGIN_US; + drr_stretched_vblank_us = (drr_timing->v_total - drr_timing->v_addressable) * drr_timing->h_total / + (double)(drr_timing->pix_clk_100hz * 100) * 1000000 + (stretched_drr_us - drr_frame_us); + max_vblank_mallregion = drr_stretched_vblank_us > mall_region_us ? drr_stretched_vblank_us : mall_region_us; + } /* We consider SubVP + DRR schedulable if the stretched frame duration of the DRR display (i.e. the * highest refresh rate + margin that can support UCLK P-State switch) passes the static analysis @@ -887,6 +906,8 @@ static bool subvp_vblank_schedulable(struct dc *dc, struct dc_state *context) struct dc_crtc_timing *main_timing = NULL; struct dc_crtc_timing *phantom_timing = NULL; struct dc_crtc_timing *vblank_timing = NULL; + struct dc_stream_state *phantom_stream; + enum mall_stream_type pipe_mall_type; /* For SubVP + VBLANK/DRR cases, we assume there can only be * a single VBLANK/DRR display. If DML outputs SubVP + VBLANK @@ -896,6 +917,7 @@ static bool subvp_vblank_schedulable(struct dc *dc, struct dc_state *context) */ for (i = 0; i < dc->res_pool->pipe_count; i++) { pipe = &context->res_ctx.pipe_ctx[i]; + pipe_mall_type = dc_state_get_pipe_subvp_type(context, pipe); // We check for master pipe, but it shouldn't matter since we only need // the pipe for timing info (stream should be same for any pipe splits) @@ -903,18 +925,19 @@ static bool subvp_vblank_schedulable(struct dc *dc, struct dc_state *context) !resource_is_pipe_type(pipe, DPP_PIPE)) continue; - if (!found && pipe->stream->mall_stream_config.type == SUBVP_NONE) { + if (!found && pipe_mall_type == SUBVP_NONE) { // Found pipe which is not SubVP or Phantom (i.e. the VBLANK pipe). vblank_index = i; found = true; } - if (!subvp_pipe && pipe->stream->mall_stream_config.type == SUBVP_MAIN) + if (!subvp_pipe && pipe_mall_type == SUBVP_MAIN) subvp_pipe = pipe; } if (found) { + phantom_stream = dc_state_get_paired_subvp_stream(context, subvp_pipe->stream); main_timing = &subvp_pipe->stream->timing; - phantom_timing = &subvp_pipe->stream->mall_stream_config.paired_stream->timing; + phantom_timing = &phantom_stream->timing; vblank_timing = &context->res_ctx.pipe_ctx[vblank_index].stream->timing; // Prefetch time is equal to VACTIVE + BP + VSYNC of the phantom pipe // Also include the prefetch end to mallstart delay time @@ -969,7 +992,7 @@ static bool subvp_subvp_admissable(struct dc *dc, continue; if (pipe->plane_state && !pipe->top_pipe && - pipe->stream->mall_stream_config.type == SUBVP_MAIN) { + dc_state_get_pipe_subvp_type(context, pipe) == SUBVP_MAIN) { refresh_rate = (pipe->stream->timing.pix_clk_100hz * (uint64_t)100 + pipe->stream->timing.v_total * pipe->stream->timing.h_total - (uint64_t)1); refresh_rate = div_u64(refresh_rate, pipe->stream->timing.v_total); @@ -1018,23 +1041,23 @@ static bool subvp_validate_static_schedulability(struct dc *dc, for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) { struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; + enum mall_stream_type pipe_mall_type = dc_state_get_pipe_subvp_type(context, pipe); if (!pipe->stream) continue; if (pipe->plane_state && !pipe->top_pipe) { - if (pipe->stream->mall_stream_config.type == SUBVP_MAIN) + if (pipe_mall_type == SUBVP_MAIN) subvp_count++; - if (pipe->stream->mall_stream_config.type == SUBVP_NONE) { + if (pipe_mall_type == SUBVP_NONE) non_subvp_pipes++; - } } // Count how many planes that aren't SubVP/phantom are capable of VACTIVE // switching (SubVP + VACTIVE unsupported). In situations where we force // SubVP for a VACTIVE plane, we don't want to increment the vactive_count. if (vba->ActiveDRAMClockChangeLatencyMarginPerState[vlevel][vba->maxMpcComb][vba->pipe_plane[pipe_idx]] > 0 && - pipe->stream->mall_stream_config.type == SUBVP_NONE) { + pipe_mall_type == SUBVP_NONE) { vactive_count++; } pipe_idx++; @@ -1070,7 +1093,7 @@ static void assign_subvp_index(struct dc *dc, struct dc_state *context) struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; if (resource_is_pipe_type(pipe_ctx, OTG_MASTER) && - pipe_ctx->stream->mall_stream_config.type == SUBVP_MAIN) { + dc_state_get_pipe_subvp_type(context, pipe_ctx) == SUBVP_MAIN) { pipe_ctx->subvp_index = index++; } else { pipe_ctx->subvp_index = 0; @@ -1414,6 +1437,7 @@ static void dcn32_full_validate_bw_helper(struct dc *dc, unsigned int dc_pipe_idx = 0; int i = 0; bool found_supported_config = false; + int vlevel_temp = 0; dc_assert_fp_enabled(); @@ -1446,13 +1470,15 @@ static void dcn32_full_validate_bw_helper(struct dc *dc, */ if (!dc->debug.force_disable_subvp && !dc->caps.dmub_caps.gecc_enable && dcn32_all_pipes_have_stream_and_plane(dc, context) && !dcn32_mpo_in_use(context) && !dcn32_any_surfaces_rotated(dc, context) && !is_test_pattern_enabled(context) && - (*vlevel == context->bw_ctx.dml.soc.num_states || + (*vlevel == context->bw_ctx.dml.soc.num_states || (vba->DRAMSpeedPerState[*vlevel] != vba->DRAMSpeedPerState[0] && + vba->DRAMClockChangeSupport[*vlevel][vba->maxMpcComb] != dm_dram_clock_change_unsupported) || vba->DRAMClockChangeSupport[*vlevel][vba->maxMpcComb] == dm_dram_clock_change_unsupported || dc->debug.force_subvp_mclk_switch)) { dcn32_merge_pipes_for_subvp(dc, context); memset(merge, 0, MAX_PIPES * sizeof(bool)); + vlevel_temp = *vlevel; /* to re-initialize viewport after the pipe merge */ for (i = 0; i < dc->res_pool->pipe_count; i++) { struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; @@ -1521,10 +1547,14 @@ static void dcn32_full_validate_bw_helper(struct dc *dc, } } + if (vba->DRAMSpeedPerState[*vlevel] >= vba->DRAMSpeedPerState[vlevel_temp]) + found_supported_config = false; + // If SubVP pipe config is unsupported (or cannot be used for UCLK switching) // remove phantom pipes and repopulate dml pipes if (!found_supported_config) { - dc->res_pool->funcs->remove_phantom_pipes(dc, context, false); + dc_state_remove_phantom_streams_and_planes(dc, context); + dc_state_release_phantom_streams_and_planes(dc, context); vba->DRAMClockChangeSupport[*vlevel][vba->maxMpcComb] = dm_dram_clock_change_unsupported; *pipe_cnt = dc->res_pool->funcs->populate_dml_pipes(dc, context, pipes, false); @@ -1676,7 +1706,7 @@ static void dcn32_calculate_dlg_params(struct dc *dc, struct dc_state *context, pipes[pipe_idx].pipe.dest.vready_offset = get_vready_offset(&context->bw_ctx.dml, pipes, pipe_cnt, pipe_idx); - if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type == SUBVP_PHANTOM) { + if (dc_state_get_pipe_subvp_type(context, &context->res_ctx.pipe_ctx[i]) == SUBVP_PHANTOM) { // Phantom pipe requires that DET_SIZE = 0 and no unbounded requests context->res_ctx.pipe_ctx[i].det_buffer_size_kb = 0; context->res_ctx.pipe_ctx[i].unbounded_req = false; @@ -1708,7 +1738,7 @@ static void dcn32_calculate_dlg_params(struct dc *dc, struct dc_state *context, context->res_ctx.pipe_ctx[i].plane_state != context->res_ctx.pipe_ctx[i].top_pipe->plane_state) && context->res_ctx.pipe_ctx[i].prev_odm_pipe == NULL) { /* SS: all active surfaces stored in MALL */ - if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type != SUBVP_PHANTOM) { + if (dc_state_get_pipe_subvp_type(context, &context->res_ctx.pipe_ctx[i]) != SUBVP_PHANTOM) { context->bw_ctx.bw.dcn.mall_ss_size_bytes += context->res_ctx.pipe_ctx[i].surface_size_in_mall_bytes; if (context->res_ctx.pipe_ctx[i].stream->link->psr_settings.psr_version == DC_PSR_VERSION_UNSUPPORTED) { @@ -1922,7 +1952,8 @@ bool dcn32_internal_validate_bw(struct dc *dc, return false; // For each full update, remove all existing phantom pipes first - dc->res_pool->funcs->remove_phantom_pipes(dc, context, fast_validate); + dc_state_remove_phantom_streams_and_planes(dc, context); + dc_state_release_phantom_streams_and_planes(dc, context); dc->res_pool->funcs->update_soc_for_wm_a(dc, context); @@ -2729,7 +2760,7 @@ static int build_synthetic_soc_states(bool disable_dc_mode_overwrite, struct clk struct _vcs_dpi_voltage_scaling_st entry = {0}; struct clk_limit_table_entry max_clk_data = {0}; - unsigned int min_dcfclk_mhz = 199, min_fclk_mhz = 299; + unsigned int min_dcfclk_mhz = 399, min_fclk_mhz = 599; static const unsigned int num_dcfclk_stas = 5; unsigned int dcfclk_sta_targets[DC__VOLTAGE_STATES] = {199, 615, 906, 1324, 1564}; @@ -3305,25 +3336,24 @@ bool dcn32_allow_subvp_with_active_margin(struct pipe_ctx *pipe) { bool allow = false; uint32_t refresh_rate = 0; + uint32_t min_refresh = subvp_active_margin_list.min_refresh; + uint32_t max_refresh = subvp_active_margin_list.max_refresh; + uint32_t i; - /* Allow subvp on displays that have active margin for 2560x1440@60hz displays - * only for now. There must be no scaling as well. - * - * For now we only enable on 2560x1440@60hz displays to enable 4K60 + 1440p60 configs - * for p-state switching. - */ - if (pipe->stream && pipe->plane_state) { - refresh_rate = (pipe->stream->timing.pix_clk_100hz * 100 + - pipe->stream->timing.v_total * pipe->stream->timing.h_total - 1) - / (double)(pipe->stream->timing.v_total * pipe->stream->timing.h_total); - if (pipe->stream->timing.v_addressable == 1440 && - pipe->stream->timing.h_addressable == 2560 && - refresh_rate >= 55 && refresh_rate <= 65 && - pipe->plane_state->src_rect.height == 1440 && - pipe->plane_state->src_rect.width == 2560 && - pipe->plane_state->dst_rect.height == 1440 && - pipe->plane_state->dst_rect.width == 2560) + for (i = 0; i < SUBVP_ACTIVE_MARGIN_LIST_LEN; i++) { + uint32_t width = subvp_active_margin_list.res[i].width; + uint32_t height = subvp_active_margin_list.res[i].height; + + refresh_rate = (pipe->stream->timing.pix_clk_100hz * (uint64_t)100 + + pipe->stream->timing.v_total * pipe->stream->timing.h_total - (uint64_t)1); + refresh_rate = div_u64(refresh_rate, pipe->stream->timing.v_total); + refresh_rate = div_u64(refresh_rate, pipe->stream->timing.h_total); + + if (refresh_rate >= min_refresh && refresh_rate <= max_refresh && + dcn32_check_native_scaling_for_res(pipe, width, height)) { allow = true; + break; + } } return allow; } @@ -3442,7 +3472,15 @@ void dcn32_assign_fpo_vactive_candidate(struct dc *dc, const struct dc_state *co for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) { const struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; - if (!pipe->stream) + /* In DCN32/321, FPO uses per-pipe P-State force. + * If there's no planes, HUBP is power gated and + * therefore programming UCLK_PSTATE_FORCE does + * nothing (P-State will always be asserted naturally + * on a pipe that has HUBP power gated. Therefore we + * only want to enable FPO if the FPO pipe has both + * a stream and a plane. + */ + if (!pipe->stream || !pipe->plane_state) continue; if (vba->ActiveDRAMClockChangeLatencyMarginPerState[vba->VoltageLevel][vba->maxMpcComb][vba->pipe_plane[pipe_idx]] <= 0) { |